[UTC 2018-12-16 17:40:48] 17:40:49 Received message from Master: op=Log open serial=202618 17:40:49 Log file open: Observatory C:\PKZPrograms\Logs\20181215 \ PKZ20181216174049_Observatory.txt 17:40:49 Previous log file: 17:40:53 Received message from Master: op=Log directory change serial=202620 17:40:53 Log file directory changed from C:\PKZPrograms\Logs\20181215 to C:\PKZPrograms\Logs\20181216 17:40:53 Log file name is PKZ20181216174053_Observatory.txt 17:45:27 Received message from Master: op=Identify serial=202628 17:55:27 No messages received for 10 min. 6487 sent since last one of these. 17:55:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 17:55:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 17:55:27 MsgArea S: [UTC 2018-12-16 17:55:52] 18:05:27 No messages received for 10 min. 0 sent since last one of these. 18:05:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 18:05:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:05:27 MsgArea S: 18:15:27 No messages received for 10 min. 0 sent since last one of these. 18:15:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 18:15:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:15:27 MsgArea S: [UTC 2018-12-16 18:15:52] 18:25:27 No messages received for 10 min. 0 sent since last one of these. 18:25:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 18:25:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:25:27 MsgArea S: 18:35:27 No messages received for 10 min. 0 sent since last one of these. 18:35:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 18:35:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:35:27 MsgArea S: [UTC 2018-12-16 18:35:52] 18:45:27 No messages received for 10 min. 0 sent since last one of these. 18:45:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 18:45:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:45:27 MsgArea S: 18:55:27 No messages received for 10 min. 0 sent since last one of these. 18:55:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 18:55:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:55:27 MsgArea S: [UTC 2018-12-16 18:55:52] 19:05:27 No messages received for 10 min. 0 sent since last one of these. 19:05:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 19:05:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:05:27 MsgArea S: 19:15:27 No messages received for 10 min. 0 sent since last one of these. 19:15:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 19:15:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:15:27 MsgArea S: [UTC 2018-12-16 19:15:52] 19:25:27 No messages received for 10 min. 0 sent since last one of these. 19:25:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 19:25:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:25:27 MsgArea S: 19:35:27 No messages received for 10 min. 0 sent since last one of these. 19:35:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 19:35:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:35:27 MsgArea S: [UTC 2018-12-16 19:35:52] 19:45:27 No messages received for 10 min. 0 sent since last one of these. 19:45:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 19:45:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:45:27 MsgArea S: 19:55:27 No messages received for 10 min. 0 sent since last one of these. 19:55:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 19:55:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:55:27 MsgArea S: [UTC 2018-12-16 19:55:52] 20:05:27 No messages received for 10 min. 0 sent since last one of these. 20:05:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 20:05:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:05:27 MsgArea S: 20:15:27 No messages received for 10 min. 0 sent since last one of these. 20:15:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 20:15:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:15:27 MsgArea S: [UTC 2018-12-16 20:15:52] 20:25:27 No messages received for 10 min. 0 sent since last one of these. 20:25:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 20:25:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:25:27 MsgArea S: 20:35:27 No messages received for 10 min. 0 sent since last one of these. 20:35:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 20:35:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:35:27 MsgArea S: [UTC 2018-12-16 20:35:52] 20:45:27 No messages received for 10 min. 0 sent since last one of these. 20:45:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 20:45:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:45:27 MsgArea S: 20:55:27 No messages received for 10 min. 0 sent since last one of these. 20:55:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 20:55:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:55:27 MsgArea S: [UTC 2018-12-16 20:55:52] 21:05:27 No messages received for 10 min. 0 sent since last one of these. 21:05:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 21:05:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:05:27 MsgArea S: 21:15:27 No messages received for 10 min. 0 sent since last one of these. 21:15:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 21:15:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:15:27 MsgArea S: [UTC 2018-12-16 21:15:52] 21:25:27 No messages received for 10 min. 0 sent since last one of these. 21:25:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 21:25:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:25:27 MsgArea S: 21:35:27 No messages received for 10 min. 0 sent since last one of these. 21:35:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 21:35:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:35:27 MsgArea S: [UTC 2018-12-16 21:35:52] 21:45:27 No messages received for 10 min. 0 sent since last one of these. 21:45:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 21:45:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:45:27 MsgArea S: 21:55:27 No messages received for 10 min. 0 sent since last one of these. 21:55:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 21:55:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:55:27 MsgArea S: [UTC 2018-12-16 21:55:52] 22:05:27 No messages received for 10 min. 0 sent since last one of these. 22:05:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 22:05:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:05:27 MsgArea S: 22:15:27 No messages received for 10 min. 0 sent since last one of these. 22:15:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 22:15:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:15:27 MsgArea S: [UTC 2018-12-16 22:15:52] 22:25:27 No messages received for 10 min. 0 sent since last one of these. 22:25:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 22:25:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:25:27 MsgArea S: 22:35:27 No messages received for 10 min. 0 sent since last one of these. 22:35:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 22:35:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:35:27 MsgArea S: [UTC 2018-12-16 22:35:52] 22:45:27 No messages received for 10 min. 0 sent since last one of these. 22:45:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 22:45:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:45:27 MsgArea S: 22:55:27 No messages received for 10 min. 0 sent since last one of these. 22:55:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 22:55:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:55:27 MsgArea S: [UTC 2018-12-16 22:55:52] 23:05:27 No messages received for 10 min. 0 sent since last one of these. 23:05:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 23:05:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:05:27 MsgArea S: 23:15:27 No messages received for 10 min. 0 sent since last one of these. 23:15:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 23:15:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:15:27 MsgArea S: [UTC 2018-12-16 23:15:52] 23:25:27 No messages received for 10 min. 0 sent since last one of these. 23:25:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 23:25:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:25:27 MsgArea S: 23:35:27 No messages received for 10 min. 0 sent since last one of these. 23:35:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 23:35:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:35:27 MsgArea S: [UTC 2018-12-16 23:35:52] 23:45:27 No messages received for 10 min. 0 sent since last one of these. 23:45:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 23:45:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:45:27 MsgArea S: 23:55:27 No messages received for 10 min. 0 sent since last one of these. 23:55:27 MsgArea H: nextMessageSerial=202631 startMsgs=68 nextFree=38148 maxMsg=65468 23:55:27 MsgArea Q: Master=37536:37944 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:55:27 MsgArea S: [UTC 2018-12-16 23:55:52] 23:55:55 Received message from Master: op=PointingHead serial=202632 23:55:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:55:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:55:56 Point started: ret=0 23:55:56 point_skyscan result=0 23:55:56 Check angles 23:55:56 SkyScan query 23:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:55:57 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:55:57 Message to Master queued w/err=0: serial=202632 error=0 23:56:02 Received message from Master: op=Filter serial=202633 23:56:02 Color wheel filter change from 2 to 2 23:56:02 FLIGetFilterPos err=0 currentPosition=2 23:56:02 FLIGetStepsRemaining err=0 RemainingSteps=0 23:56:02 Filter is already there-color wheel unchanged 23:56:02 Received message from Master: op=Shutter serial=202634 23:56:02 Shutter LASER close 23:56:04 Received message from Camera: op=State serial=202636 23:56:04 GetSingleValue result=40 Value=cccccccc 23:56:04 SkyScan query 23:56:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:56:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:56:04 Parameters OK 23:56:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:56:04 Set A/D data flow result=40 23:56:04 Set A/D channel type result=40 23:56:04 Set A/D encoding result=40 23:56:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:56:04 Set channel filter=0.000000e+000 result=40 23:56:04 Config A/D Result=40 23:56:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:56:04 Get A/D filter: -9.255963e+061 result=40 23:56:04 Get A/D value=-858993460 result=40 23:56:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:56:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:56:04 Parameters OK 23:56:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:56:04 Set A/D data flow result=40 23:56:04 Set A/D channel type result=40 23:56:04 Set A/D encoding result=40 23:56:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:56:04 Set channel filter=0.000000e+000 result=40 23:56:04 Config A/D Result=40 23:56:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:56:04 Get A/D filter: -9.255963e+061 result=40 23:56:04 Get A/D value=-858993460 result=40 23:56:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:56:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:56:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:56:04 Aux= 23:56:04 Message to Camera, serial 202636 queued 23:56:10 Received message from Master: op=PointingHead serial=202647 23:56:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:56:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:56:10 Point started: ret=0 23:56:10 point_skyscan result=0 23:56:11 Check angles 23:56:11 SkyScan query 23:56:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:56:12 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:56:12 Message to Master queued w/err=0: serial=202647 error=0 23:56:17 Received message from Master: op=Filter serial=202648 23:56:17 Color wheel filter change from 2 to 2 23:56:17 FLIGetFilterPos err=0 currentPosition=2 23:56:17 FLIGetStepsRemaining err=0 RemainingSteps=0 23:56:17 Filter is already there-color wheel unchanged 23:56:17 Received message from Master: op=Shutter serial=202649 23:56:17 Shutter LASER close 23:56:17 Received message from Camera: op=State serial=202651 23:56:17 GetSingleValue result=40 Value=cccccccc 23:56:17 SkyScan query 23:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:56:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:56:18 Parameters OK 23:56:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:56:18 Set A/D data flow result=40 23:56:18 Set A/D channel type result=40 23:56:18 Set A/D encoding result=40 23:56:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:56:18 Set channel filter=0.000000e+000 result=40 23:56:18 Config A/D Result=40 23:56:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:56:18 Get A/D filter: -9.255963e+061 result=40 23:56:18 Get A/D value=-858993460 result=40 23:56:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:56:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:56:18 Parameters OK 23:56:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:56:18 Set A/D data flow result=40 23:56:18 Set A/D channel type result=40 23:56:18 Set A/D encoding result=40 23:56:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:56:18 Set channel filter=0.000000e+000 result=40 23:56:18 Config A/D Result=40 23:56:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:56:18 Get A/D filter: -9.255963e+061 result=40 23:56:18 Get A/D value=-858993460 result=40 23:56:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:56:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:56:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:56:18 Aux= 23:56:18 Message to Camera, serial 202651 queued 23:56:53 Received message from Master: op=PointingHead serial=202663 23:56:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:56:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:56:54 Point started: ret=0 23:56:54 point_skyscan result=0 23:56:54 Check angles 23:56:54 SkyScan query 23:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:56:55 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:56:55 Message to Master queued w/err=0: serial=202663 error=0 23:57:00 Received message from Master: op=Filter serial=202664 23:57:00 Color wheel filter change from 2 to 2 23:57:00 FLIGetFilterPos err=0 currentPosition=2 23:57:00 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:00 Filter is already there-color wheel unchanged 23:57:00 Received message from Master: op=Shutter serial=202665 23:57:00 Shutter LASER open 23:57:00 Received message from Camera: op=State serial=202667 23:57:00 GetSingleValue result=40 Value=cccccccc 23:57:00 SkyScan query 23:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:57:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:01 Parameters OK 23:57:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:01 Set A/D data flow result=40 23:57:01 Set A/D channel type result=40 23:57:01 Set A/D encoding result=40 23:57:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:01 Set channel filter=0.000000e+000 result=40 23:57:01 Config A/D Result=40 23:57:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:01 Get A/D filter: -9.255963e+061 result=40 23:57:01 Get A/D value=-858993460 result=40 23:57:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:01 Parameters OK 23:57:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:01 Set A/D data flow result=40 23:57:01 Set A/D channel type result=40 23:57:01 Set A/D encoding result=40 23:57:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:01 Set channel filter=0.000000e+000 result=40 23:57:01 Config A/D Result=40 23:57:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:01 Get A/D filter: -9.255963e+061 result=40 23:57:01 Get A/D value=-858993460 result=40 23:57:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:57:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:57:01 Aux= 23:57:01 Message to Camera, serial 202667 queued 23:57:10 Received message from Master: op=Shutter serial=202677 23:57:10 Shutter LASER close 23:57:10 Received message from Master: op=PointingHead serial=202681 23:57:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 23:57:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 23:57:10 Point started: ret=0 23:57:10 point_skyscan result=0 23:57:11 Check angles 23:57:11 SkyScan query 23:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:57:12 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 23:57:12 Message to Master queued w/err=0: serial=202681 error=0 23:57:17 Received message from Master: op=Filter serial=202682 23:57:17 Color wheel filter change from 2 to 2 23:57:17 FLIGetFilterPos err=0 currentPosition=2 23:57:17 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:17 Filter is already there-color wheel unchanged 23:57:17 Received message from Master: op=Shutter serial=202683 23:57:17 Shutter LASER close 23:57:17 Received message from Camera: op=State serial=202685 23:57:17 GetSingleValue result=40 Value=cccccccc 23:57:17 SkyScan query 23:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 23:57:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:18 Parameters OK 23:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:18 Set A/D data flow result=40 23:57:18 Set A/D channel type result=40 23:57:18 Set A/D encoding result=40 23:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:18 Set channel filter=0.000000e+000 result=40 23:57:18 Config A/D Result=40 23:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:18 Get A/D filter: -9.255963e+061 result=40 23:57:18 Get A/D value=-858993460 result=40 23:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:18 Parameters OK 23:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:18 Set A/D data flow result=40 23:57:18 Set A/D channel type result=40 23:57:18 Set A/D encoding result=40 23:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:18 Set channel filter=0.000000e+000 result=40 23:57:18 Config A/D Result=40 23:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:18 Get A/D filter: -9.255963e+061 result=40 23:57:18 Get A/D value=-858993460 result=40 23:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:57:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:57:18 Aux= 23:57:18 Message to Camera, serial 202685 queued 23:57:25 Received message from Master: op=PointingHead serial=202697 23:57:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 23:57:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 23:57:26 Point started: ret=0 23:57:26 point_skyscan result=0 23:57:26 Check angles 23:57:26 SkyScan query 23:57:27 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.295<-21553 Statuses=0009 0009 23:57:27 Msec=0 True Az=135.885 Ze=-143.295 Az status=0009 Ze status=0009 23:57:27 Check angles 23:57:27 SkyScan query 23:57:28 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.31<-20154 Statuses=0009 0009 23:57:28 Msec=750 True Az=153.435 Ze=-122.31 Az status=0009 Ze status=0009 23:57:28 Check angles 23:57:28 SkyScan query 23:57:29 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.935<-18729 Statuses=0009 0009 23:57:29 Msec=1500 True Az=171.39 Ze=-100.935 Az status=0009 Ze status=0009 23:57:29 Check angles 23:57:29 SkyScan query 23:57:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.04<-17336 Statuses=0008 0009 23:57:29 Msec=2250 True Az=175.995 Ze=-80.04 Az status=0008 Ze status=0009 23:57:29 Check angles 23:57:29 SkyScan query 23:57:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 23:57:30 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 23:57:30 Check angles 23:57:30 SkyScan query 23:57:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 23:57:31 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 23:57:31 Message to Master queued w/err=0: serial=202697 error=0 23:57:36 Received message from Master: op=Filter serial=202698 23:57:36 Color wheel filter change from 2 to 0 23:57:36 FLIGetFilterPos err=0 currentPosition=2 23:57:36 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:42 FLISetFilterPos err=0 rqPosition=0 23:57:42 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:42 Check after 0.00 sec for filter wheel DIn/CWh=0 23:57:42 FLIGetFilterPos err=0 currentPosition=0 23:57:42 FLIGetStepsRemaining err=0 RemainingSteps=0 23:57:42 Received message from Master: op=Shutter serial=202699 23:57:42 Shutter LASER close 23:57:42 Received message from Camera: op=State serial=202701 23:57:42 GetSingleValue result=40 Value=cccccccc 23:57:42 SkyScan query 23:57:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 23:57:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:43 Parameters OK 23:57:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:43 Set A/D data flow result=40 23:57:43 Set A/D channel type result=40 23:57:43 Set A/D encoding result=40 23:57:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:43 Set channel filter=0.000000e+000 result=40 23:57:43 Config A/D Result=40 23:57:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:43 Get A/D filter: -9.255963e+061 result=40 23:57:43 Get A/D value=-858993460 result=40 23:57:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:57:43 Parameters OK 23:57:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:57:43 Set A/D data flow result=40 23:57:43 Set A/D channel type result=40 23:57:43 Set A/D encoding result=40 23:57:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:57:43 Set channel filter=0.000000e+000 result=40 23:57:43 Config A/D Result=40 23:57:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:57:43 Get A/D filter: -9.255963e+061 result=40 23:57:43 Get A/D value=-858993460 result=40 23:57:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:57:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:57:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:57:43 Aux= 23:57:43 Message to Camera, serial 202701 queued 23:58:20 Received message from Master: op=PointingHead serial=202714 23:58:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 23:58:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 23:58:20 Point started: ret=0 23:58:20 point_skyscan result=0 23:58:21 Check angles 23:58:21 SkyScan query 23:58:21 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.645<-13443 Statuses=0009 0009 23:58:21 Msec=0 True Az=152.94 Ze=-21.645 Az status=0009 Ze status=0009 23:58:22 Check angles 23:58:22 SkyScan query 23:58:22 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.72<-12048 Statuses=0009 0009 23:58:22 Msec=750 True Az=135.42 Ze=-0.72 Az status=0009 Ze status=0009 23:58:22 Check angles 23:58:22 SkyScan query 23:58:23 SkyScan query done: ret=0 az=117.57<-7838 ze=20.685<-10621 Statuses=0009 0009 23:58:23 Msec=1500 True Az=117.57 Ze=20.685 Az status=0009 Ze status=0009 23:58:23 Check angles 23:58:23 SkyScan query 23:58:24 SkyScan query done: ret=0 az=100.17<-6678 ze=41.67<-9222 Statuses=0009 0009 23:58:24 Msec=2250 True Az=100.17 Ze=41.67 Az status=0009 Ze status=0009 23:58:24 Check angles 23:58:24 SkyScan query 23:58:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 23:58:24 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 23:58:25 Check angles 23:58:25 SkyScan query 23:58:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 23:58:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 23:58:25 Message to Master queued w/err=0: serial=202714 error=0 23:58:30 Received message from Master: op=Filter serial=202715 23:58:30 Color wheel filter change from 0 to 0 23:58:30 FLIGetFilterPos err=0 currentPosition=0 23:58:30 FLIGetStepsRemaining err=0 RemainingSteps=0 23:58:30 Filter is already there-color wheel unchanged 23:58:30 Received message from Master: op=Shutter serial=202716 23:58:30 Shutter LASER close 23:58:30 Received message from Camera: op=State serial=202718 23:58:30 GetSingleValue result=40 Value=cccccccc 23:58:30 SkyScan query 23:58:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 23:58:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:31 Parameters OK 23:58:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:31 Set A/D data flow result=40 23:58:31 Set A/D channel type result=40 23:58:31 Set A/D encoding result=40 23:58:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:31 Set channel filter=0.000000e+000 result=40 23:58:31 Config A/D Result=40 23:58:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:31 Get A/D filter: -9.255963e+061 result=40 23:58:31 Get A/D value=-858993460 result=40 23:58:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:58:31 Parameters OK 23:58:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:58:31 Set A/D data flow result=40 23:58:31 Set A/D channel type result=40 23:58:31 Set A/D encoding result=40 23:58:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:58:31 Set channel filter=0.000000e+000 result=40 23:58:31 Config A/D Result=40 23:58:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:58:31 Get A/D filter: -9.255963e+061 result=40 23:58:31 Get A/D value=-858993460 result=40 23:58:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:58:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:58:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:58:31 Aux= 23:58:31 Message to Camera, serial 202718 queued 23:59:08 Received message from Master: op=PointingHead serial=202731 23:59:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 23:59:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 23:59:08 Point started: ret=0 23:59:08 point_skyscan result=0 23:59:09 Check angles 23:59:09 SkyScan query 23:59:10 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 23:59:10 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 23:59:10 Check angles 23:59:10 SkyScan query 23:59:10 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 23:59:10 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 23:59:10 Check angles 23:59:10 SkyScan query 23:59:11 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 23:59:11 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 23:59:11 Check angles 23:59:11 SkyScan query 23:59:12 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 23:59:12 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 23:59:12 Check angles 23:59:12 SkyScan query 23:59:13 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 23:59:13 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 23:59:13 Check angles 23:59:13 SkyScan query 23:59:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 23:59:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 23:59:13 Message to Master queued w/err=0: serial=202731 error=0 23:59:18 Received message from Master: op=Filter serial=202732 23:59:18 Color wheel filter change from 0 to 0 23:59:18 FLIGetFilterPos err=0 currentPosition=0 23:59:18 FLIGetStepsRemaining err=0 RemainingSteps=0 23:59:18 Filter is already there-color wheel unchanged 23:59:18 Received message from Master: op=Shutter serial=202733 23:59:18 Shutter LASER close 23:59:18 Received message from Camera: op=State serial=202735 23:59:18 GetSingleValue result=40 Value=cccccccc 23:59:18 SkyScan query 23:59:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 23:59:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:19 Parameters OK 23:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:19 Set A/D data flow result=40 23:59:19 Set A/D channel type result=40 23:59:19 Set A/D encoding result=40 23:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:19 Set channel filter=0.000000e+000 result=40 23:59:19 Config A/D Result=40 23:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:19 Get A/D filter: -9.255963e+061 result=40 23:59:19 Get A/D value=-858993460 result=40 23:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 23:59:19 Parameters OK 23:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 23:59:19 Set A/D data flow result=40 23:59:19 Set A/D channel type result=40 23:59:19 Set A/D encoding result=40 23:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 23:59:19 Set channel filter=0.000000e+000 result=40 23:59:19 Config A/D Result=40 23:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 23:59:19 Get A/D filter: -9.255963e+061 result=40 23:59:19 Get A/D value=-858993460 result=40 23:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 23:59:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 23:59:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 23:59:19 Aux= 23:59:19 Message to Camera, serial 202735 queued 23:59:56 Received message from Master: op=PointingHead serial=202748 23:59:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 23:59:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 23:59:56 Point started: ret=0 23:59:56 point_skyscan result=0 23:59:57 Check angles 23:59:57 SkyScan query 23:59:58 SkyScan query done: ret=0 az=152.76<-10184 ze=8.505<-11433 Statuses=0009 0009 23:59:58 Msec=0 True Az=152.76 Ze=8.505 Az status=0009 Ze status=0009 23:59:58 Check angles 23:59:58 SkyScan query 23:59:58 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.45<-12830 Statuses=0009 0009 23:59:58 Msec=750 True Az=135.39 Ze=-12.45 Az status=0009 Ze status=0009 23:59:58 Check angles 23:59:58 SkyScan query 23:59:59 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.36<-14224 Statuses=0009 0009 23:59:59 Msec=1500 True Az=117.795 Ze=-33.36 Az status=0009 Ze status=0009 23:59:59 Check angles 23:59:59 SkyScan query 00:00:00 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.57<-15438 Statuses=0009 0009 00:00:00 Msec=2250 True Az=100.155 Ze=-51.57 Az status=0009 Ze status=0009 00:00:00 Check angles 00:00:00 SkyScan query 00:00:01 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 00:00:01 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 00:00:01 Check angles 00:00:01 SkyScan query 00:00:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:00:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:00:01 Message to Master queued w/err=0: serial=202748 error=0 00:00:06 Received message from Master: op=Filter serial=202749 00:00:06 Color wheel filter change from 0 to 0 00:00:06 FLIGetFilterPos err=0 currentPosition=0 00:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:00:06 Filter is already there-color wheel unchanged 00:00:06 Received message from Master: op=Shutter serial=202750 00:00:06 Shutter LASER close 00:00:07 Received message from Camera: op=State serial=202752 00:00:07 GetSingleValue result=40 Value=cccccccc 00:00:07 SkyScan query 00:00:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:07 Parameters OK 00:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:07 Set A/D data flow result=40 00:00:07 Set A/D channel type result=40 00:00:07 Set A/D encoding result=40 00:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:07 Set channel filter=0.000000e+000 result=40 00:00:07 Config A/D Result=40 00:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:07 Get A/D filter: -9.255963e+061 result=40 00:00:07 Get A/D value=-858993460 result=40 00:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:07 Parameters OK 00:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:07 Set A/D data flow result=40 00:00:07 Set A/D channel type result=40 00:00:07 Set A/D encoding result=40 00:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:07 Set channel filter=0.000000e+000 result=40 00:00:07 Config A/D Result=40 00:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:07 Get A/D filter: -9.255963e+061 result=40 00:00:07 Get A/D value=-858993460 result=40 00:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:00:07 Aux= 00:00:07 Message to Camera, serial 202752 queued 00:00:44 Received message from Master: op=PointingHead serial=202765 00:00:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:00:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:00:44 Point started: ret=0 00:00:44 point_skyscan result=0 00:00:45 Check angles 00:00:45 SkyScan query 00:00:46 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.165<-17411 Statuses=0009 0009 00:00:46 Msec=0 True Az=108.84 Ze=-81.165 Az status=0009 Ze status=0009 00:00:46 Check angles 00:00:46 SkyScan query 00:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 00:00:46 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 00:00:47 Check angles 00:00:47 SkyScan query 00:00:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.015<-20201 Statuses=0008 0009 00:00:47 Msec=1500 True Az=112.995 Ze=-123.015 Az status=0008 Ze status=0009 00:00:47 Check angles 00:00:47 SkyScan query 00:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.48<-21632 Statuses=0008 0009 00:00:48 Msec=2250 True Az=112.995 Ze=-144.48 Az status=0008 Ze status=0009 00:00:48 Check angles 00:00:48 SkyScan query 00:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 00:00:49 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 00:00:49 Check angles 00:00:49 SkyScan query 00:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:00:49 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:00:49 Message to Master queued w/err=0: serial=202765 error=0 00:00:54 Received message from Master: op=Filter serial=202766 00:00:54 Color wheel filter change from 0 to 0 00:00:54 FLIGetFilterPos err=0 currentPosition=0 00:00:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:00:54 Filter is already there-color wheel unchanged 00:00:55 Received message from Master: op=Shutter serial=202767 00:00:55 Shutter LASER open 00:00:55 Received message from Camera: op=State serial=202769 00:00:55 GetSingleValue result=40 Value=cccccccc 00:00:55 SkyScan query 00:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:00:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:55 Parameters OK 00:00:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:55 Set A/D data flow result=40 00:00:55 Set A/D channel type result=40 00:00:55 Set A/D encoding result=40 00:00:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:55 Set channel filter=0.000000e+000 result=40 00:00:55 Config A/D Result=40 00:00:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:55 Get A/D filter: -9.255963e+061 result=40 00:00:55 Get A/D value=-858993460 result=40 00:00:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:00:55 Parameters OK 00:00:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:00:55 Set A/D data flow result=40 00:00:55 Set A/D channel type result=40 00:00:55 Set A/D encoding result=40 00:00:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:00:55 Set channel filter=0.000000e+000 result=40 00:00:55 Config A/D Result=40 00:00:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:00:55 Get A/D filter: -9.255963e+061 result=40 00:00:55 Get A/D value=-858993460 result=40 00:00:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:00:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:00:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:00:55 Aux= 00:00:55 Message to Camera, serial 202769 queued 00:01:04 Received message from Master: op=Shutter serial=202779 00:01:04 Shutter LASER close 00:01:04 Received message from Master: op=PointingHead serial=202783 00:01:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:01:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:01:05 Point started: ret=0 00:01:05 point_skyscan result=0 00:01:05 Check angles 00:01:05 SkyScan query 00:01:06 SkyScan query done: ret=0 az=89.535<-5969 ze=157.065<-1529 Statuses=0009 0009 00:01:06 Msec=0 True Az=89.535 Ze=157.065 Az status=0009 Ze status=0009 00:01:06 Check angles 00:01:06 SkyScan query 00:01:07 SkyScan query done: ret=0 az=72.195<-4813 ze=136.11<-2926 Statuses=0009 0009 00:01:07 Msec=750 True Az=72.195 Ze=136.11 Az status=0009 Ze status=0009 00:01:07 Check angles 00:01:07 SkyScan query 00:01:07 SkyScan query done: ret=0 az=54.69<-3646 ze=115.2<-4320 Statuses=0009 0009 00:01:07 Msec=1500 True Az=54.69 Ze=115.2 Az status=0009 Ze status=0009 00:01:08 Check angles 00:01:08 SkyScan query 00:01:08 SkyScan query done: ret=0 az=41.025<-2735 ze=94.185<-5721 Statuses=0009 0009 00:01:08 Msec=2250 True Az=41.025 Ze=94.185 Az status=0009 Ze status=0009 00:01:08 Check angles 00:01:08 SkyScan query 00:01:09 SkyScan query done: ret=0 az=40.98<-2732 ze=73.23<-7118 Statuses=0008 0009 00:01:09 Msec=3000 True Az=40.98 Ze=73.23 Az status=0008 Ze status=0009 00:01:09 Check angles 00:01:09 SkyScan query 00:01:10 SkyScan query done: ret=0 az=40.98<-2732 ze=52.74<-8484 Statuses=0008 0009 00:01:10 Msec=3750 True Az=40.98 Ze=52.74 Az status=0008 Ze status=0009 00:01:10 Check angles 00:01:10 SkyScan query 00:01:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:01:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:01:10 Message to Master queued w/err=0: serial=202783 error=0 00:01:15 Received message from Master: op=Filter serial=202784 00:01:15 Color wheel filter change from 0 to 0 00:01:15 FLIGetFilterPos err=0 currentPosition=0 00:01:15 FLIGetStepsRemaining err=0 RemainingSteps=0 00:01:15 Filter is already there-color wheel unchanged 00:01:16 Received message from Master: op=Shutter serial=202785 00:01:16 Shutter LASER close 00:01:16 Received message from Camera: op=State serial=202787 00:01:16 GetSingleValue result=40 Value=cccccccc 00:01:16 SkyScan query 00:01:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:01:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:16 Parameters OK 00:01:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:16 Set A/D data flow result=40 00:01:16 Set A/D channel type result=40 00:01:16 Set A/D encoding result=40 00:01:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:16 Set channel filter=0.000000e+000 result=40 00:01:16 Config A/D Result=40 00:01:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:16 Get A/D filter: -9.255963e+061 result=40 00:01:16 Get A/D value=-858993460 result=40 00:01:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:01:16 Parameters OK 00:01:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:01:16 Set A/D data flow result=40 00:01:16 Set A/D channel type result=40 00:01:16 Set A/D encoding result=40 00:01:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:01:16 Set channel filter=0.000000e+000 result=40 00:01:16 Config A/D Result=40 00:01:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:01:16 Get A/D filter: -9.255963e+061 result=40 00:01:16 Get A/D value=-858993460 result=40 00:01:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:01:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:01:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:01:16 Aux= 00:01:16 Message to Camera, serial 202787 queued 00:01:52 Received message from Master: op=PointingHead serial=202799 00:01:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:01:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:01:53 Point started: ret=0 00:01:53 point_skyscan result=0 00:01:53 Check angles 00:01:53 SkyScan query 00:01:54 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 00:01:54 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 00:01:54 Check angles 00:01:54 SkyScan query 00:01:55 SkyScan query done: ret=0 az=81.24<-5416 ze=66.495<-7567 Statuses=0009 0008 00:01:55 Msec=750 True Az=81.24 Ze=66.495 Az status=0009 Ze status=0008 00:01:55 Check angles 00:01:55 SkyScan query 00:01:55 SkyScan query done: ret=0 az=98.67<-6578 ze=66.495<-7567 Statuses=0009 0008 00:01:55 Msec=1500 True Az=98.67 Ze=66.495 Az status=0009 Ze status=0008 00:01:56 Check angles 00:01:56 SkyScan query 00:01:56 SkyScan query done: ret=0 az=116.19<-7746 ze=66.495<-7567 Statuses=0009 0008 00:01:56 Msec=2250 True Az=116.19 Ze=66.495 Az status=0009 Ze status=0008 00:01:56 Check angles 00:01:56 SkyScan query 00:01:57 SkyScan query done: ret=0 az=133.575<-8905 ze=66.495<-7567 Statuses=0009 0008 00:01:57 Msec=3000 True Az=133.575 Ze=66.495 Az status=0009 Ze status=0008 00:01:57 Check angles 00:01:57 SkyScan query 00:01:58 SkyScan query done: ret=0 az=151.005<-10067 ze=66.495<-7567 Statuses=0009 0008 00:01:58 Msec=3750 True Az=151.005 Ze=66.495 Az status=0009 Ze status=0008 00:01:58 Check angles 00:01:58 SkyScan query 00:01:58 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:01:58 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:01:58 Message to Master queued w/err=0: serial=202799 error=0 00:02:03 Received message from Master: op=Filter serial=202800 00:02:03 Color wheel filter change from 0 to 0 00:02:03 FLIGetFilterPos err=0 currentPosition=0 00:02:03 FLIGetStepsRemaining err=0 RemainingSteps=0 00:02:03 Filter is already there-color wheel unchanged 00:02:04 Received message from Master: op=Shutter serial=202801 00:02:04 Shutter LASER close 00:02:04 Received message from Camera: op=State serial=202803 00:02:04 GetSingleValue result=40 Value=cccccccc 00:02:04 SkyScan query 00:02:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:02:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:04 Parameters OK 00:02:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:04 Set A/D data flow result=40 00:02:04 Set A/D channel type result=40 00:02:04 Set A/D encoding result=40 00:02:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:04 Set channel filter=0.000000e+000 result=40 00:02:04 Config A/D Result=40 00:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:04 Get A/D filter: -9.255963e+061 result=40 00:02:04 Get A/D value=-858993460 result=40 00:02:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:04 Parameters OK 00:02:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:04 Set A/D data flow result=40 00:02:04 Set A/D channel type result=40 00:02:04 Set A/D encoding result=40 00:02:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:04 Set channel filter=0.000000e+000 result=40 00:02:04 Config A/D Result=40 00:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:04 Get A/D filter: -9.255963e+061 result=40 00:02:04 Get A/D value=-858993460 result=40 00:02:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:02:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:02:04 Aux= 00:02:04 Message to Camera, serial 202803 queued 00:02:41 Received message from Master: op=PointingHead serial=202816 00:02:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:02:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:02:41 Point started: ret=0 00:02:41 point_skyscan result=0 00:02:42 Check angles 00:02:42 SkyScan query 00:02:43 SkyScan query done: ret=0 az=135.015<-9001 ze=36.765<-9549 Statuses=0009 0009 00:02:43 Msec=0 True Az=135.015 Ze=36.765 Az status=0009 Ze status=0009 00:02:43 Check angles 00:02:43 SkyScan query 00:02:43 SkyScan query done: ret=0 az=117.525<-7835 ze=15.825<-10945 Statuses=0009 0009 00:02:43 Msec=750 True Az=117.525 Ze=15.825 Az status=0009 Ze status=0009 00:02:44 Check angles 00:02:44 SkyScan query 00:02:44 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.13<-12342 Statuses=0009 0009 00:02:44 Msec=1500 True Az=100.2 Ze=-5.13 Az status=0009 Ze status=0009 00:02:44 Check angles 00:02:44 SkyScan query 00:02:45 SkyScan query done: ret=0 az=82.635<-5509 ze=-26.085<-13739 Statuses=0009 0009 00:02:45 Msec=2250 True Az=82.635 Ze=-26.085 Az status=0009 Ze status=0009 00:02:45 Check angles 00:02:45 SkyScan query 00:02:46 SkyScan query done: ret=0 az=65.145<-4343 ze=-38.595<-14573 Statuses=0009 0008 00:02:46 Msec=3000 True Az=65.145 Ze=-38.595 Az status=0009 Ze status=0008 00:02:46 Check angles 00:02:46 SkyScan query 00:02:46 SkyScan query done: ret=0 az=47.715<-3181 ze=-38.52<-14568 Statuses=0009 0008 00:02:46 Msec=3750 True Az=47.715 Ze=-38.52 Az status=0009 Ze status=0008 00:02:47 Check angles 00:02:47 SkyScan query 00:02:47 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 00:02:47 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 00:02:47 Message to Master queued w/err=0: serial=202816 error=0 00:02:52 Received message from Master: op=Filter serial=202817 00:02:52 Color wheel filter change from 0 to 0 00:02:52 FLIGetFilterPos err=0 currentPosition=0 00:02:52 FLIGetStepsRemaining err=0 RemainingSteps=0 00:02:52 Filter is already there-color wheel unchanged 00:02:52 Received message from Master: op=Shutter serial=202818 00:02:52 Shutter LASER close 00:02:52 Received message from Camera: op=State serial=202820 00:02:52 GetSingleValue result=40 Value=cccccccc 00:02:52 SkyScan query 00:02:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:02:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:53 Parameters OK 00:02:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:53 Set A/D data flow result=40 00:02:53 Set A/D channel type result=40 00:02:53 Set A/D encoding result=40 00:02:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:53 Set channel filter=0.000000e+000 result=40 00:02:53 Config A/D Result=40 00:02:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:53 Get A/D filter: -9.255963e+061 result=40 00:02:53 Get A/D value=-858993460 result=40 00:02:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:02:53 Parameters OK 00:02:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:02:53 Set A/D data flow result=40 00:02:53 Set A/D channel type result=40 00:02:53 Set A/D encoding result=40 00:02:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:02:53 Set channel filter=0.000000e+000 result=40 00:02:53 Config A/D Result=40 00:02:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:02:53 Get A/D filter: -9.255963e+061 result=40 00:02:53 Get A/D value=-858993460 result=40 00:02:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:02:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:02:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:02:53 Aux= 00:02:53 Message to Camera, serial 202820 queued 00:03:30 Received message from Master: op=PointingHead serial=202833 00:03:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:03:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:03:30 Point started: ret=0 00:03:30 point_skyscan result=0 00:03:31 Check angles 00:03:31 SkyScan query 00:03:31 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.775<-16585 Statuses=0009 0009 00:03:31 Msec=0 True Az=64.38 Ze=-68.775 Az status=0009 Ze status=0009 00:03:32 Check angles 00:03:32 SkyScan query 00:03:32 SkyScan query done: ret=0 az=82.35<-5490 ze=-90.135<-18009 Statuses=0009 0009 00:03:32 Msec=750 True Az=82.35 Ze=-90.135 Az status=0009 Ze status=0009 00:03:32 Check angles 00:03:32 SkyScan query 00:03:33 SkyScan query done: ret=0 az=99.84<-6656 ze=-111.105<-19407 Statuses=0009 0009 00:03:33 Msec=1500 True Az=99.84 Ze=-111.105 Az status=0009 Ze status=0009 00:03:33 Check angles 00:03:33 SkyScan query 00:03:34 SkyScan query done: ret=0 az=117.525<-7835 ze=-132.405<-20827 Statuses=0009 0009 00:03:34 Msec=2250 True Az=117.525 Ze=-132.405 Az status=0009 Ze status=0009 00:03:34 Check angles 00:03:34 SkyScan query 00:03:35 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 00:03:35 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 00:03:35 Check angles 00:03:35 SkyScan query 00:03:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:03:35 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:03:35 Message to Master queued w/err=0: serial=202833 error=0 00:03:40 Received message from Master: op=Filter serial=202834 00:03:40 Color wheel filter change from 0 to 0 00:03:40 FLIGetFilterPos err=0 currentPosition=0 00:03:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:03:40 Filter is already there-color wheel unchanged 00:03:40 Received message from Master: op=Shutter serial=202835 00:03:40 Shutter LASER close 00:03:40 Received message from Camera: op=State serial=202837 00:03:40 GetSingleValue result=40 Value=cccccccc 00:03:40 SkyScan query 00:03:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:03:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:41 Parameters OK 00:03:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:41 Set A/D data flow result=40 00:03:41 Set A/D channel type result=40 00:03:41 Set A/D encoding result=40 00:03:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:41 Set channel filter=0.000000e+000 result=40 00:03:41 Config A/D Result=40 00:03:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:41 Get A/D filter: -9.255963e+061 result=40 00:03:41 Get A/D value=-858993460 result=40 00:03:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:03:41 Parameters OK 00:03:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:03:41 Set A/D data flow result=40 00:03:41 Set A/D channel type result=40 00:03:41 Set A/D encoding result=40 00:03:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:03:41 Set channel filter=0.000000e+000 result=40 00:03:41 Config A/D Result=40 00:03:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:03:41 Get A/D filter: -9.255963e+061 result=40 00:03:41 Get A/D value=-858993460 result=40 00:03:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:03:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:03:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:03:41 Aux= 00:03:41 Message to Camera, serial 202837 queued 00:04:18 Received message from Master: op=PointingHead serial=202850 00:04:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:04:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:04:18 Point started: ret=0 00:04:18 point_skyscan result=0 00:04:19 Check angles 00:04:19 SkyScan query 00:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0009 0009 00:04:20 Msec=0 True Az=112.995 Ze=-171.18 Az status=0009 Ze status=0009 00:04:20 Check angles 00:04:20 SkyScan query 00:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:04:20 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:04:20 Message to Master queued w/err=0: serial=202850 error=0 00:04:25 Received message from Master: op=Filter serial=202851 00:04:25 Color wheel filter change from 0 to 0 00:04:25 FLIGetFilterPos err=0 currentPosition=0 00:04:25 FLIGetStepsRemaining err=0 RemainingSteps=0 00:04:25 Filter is already there-color wheel unchanged 00:04:26 Received message from Master: op=Shutter serial=202852 00:04:26 Shutter LASER open 00:04:26 Received message from Camera: op=State serial=202854 00:04:26 GetSingleValue result=40 Value=cccccccc 00:04:26 SkyScan query 00:04:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:04:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:26 Parameters OK 00:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:26 Set A/D data flow result=40 00:04:26 Set A/D channel type result=40 00:04:26 Set A/D encoding result=40 00:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:26 Set channel filter=0.000000e+000 result=40 00:04:26 Config A/D Result=40 00:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:26 Get A/D filter: -9.255963e+061 result=40 00:04:26 Get A/D value=-858993460 result=40 00:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:26 Parameters OK 00:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:26 Set A/D data flow result=40 00:04:26 Set A/D channel type result=40 00:04:26 Set A/D encoding result=40 00:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:26 Set channel filter=0.000000e+000 result=40 00:04:26 Config A/D Result=40 00:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:26 Get A/D filter: -9.255963e+061 result=40 00:04:26 Get A/D value=-858993460 result=40 00:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:04:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:04:26 Aux= 00:04:26 Message to Camera, serial 202854 queued 00:04:35 Received message from Master: op=Shutter serial=202864 00:04:35 Shutter LASER close 00:04:35 Received message from Master: op=PointingHead serial=202868 00:04:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:04:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:04:36 Point started: ret=0 00:04:36 point_skyscan result=0 00:04:36 Check angles 00:04:36 SkyScan query 00:04:37 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.07<-21538 Statuses=0009 0009 00:04:37 Msec=0 True Az=136.17 Ze=-143.07 Az status=0009 Ze status=0009 00:04:37 Check angles 00:04:37 SkyScan query 00:04:38 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.07<-20138 Statuses=0009 0009 00:04:38 Msec=750 True Az=153.63 Ze=-122.07 Az status=0009 Ze status=0009 00:04:38 Check angles 00:04:38 SkyScan query 00:04:38 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.56<-18704 Statuses=0009 0009 00:04:38 Msec=1500 True Az=171.555 Ze=-100.56 Az status=0009 Ze status=0009 00:04:39 Check angles 00:04:39 SkyScan query 00:04:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.725<-17315 Statuses=0008 0009 00:04:39 Msec=2250 True Az=175.995 Ze=-79.725 Az status=0008 Ze status=0009 00:04:39 Check angles 00:04:39 SkyScan query 00:04:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.695<-15913 Statuses=0008 0009 00:04:40 Msec=3000 True Az=175.995 Ze=-58.695 Az status=0008 Ze status=0009 00:04:40 Check angles 00:04:40 SkyScan query 00:04:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:04:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:04:41 Message to Master queued w/err=0: serial=202868 error=0 00:04:46 Received message from Master: op=Filter serial=202869 00:04:46 Color wheel filter change from 0 to 0 00:04:46 FLIGetFilterPos err=0 currentPosition=0 00:04:46 FLIGetStepsRemaining err=0 RemainingSteps=0 00:04:46 Filter is already there-color wheel unchanged 00:04:46 Received message from Master: op=Shutter serial=202870 00:04:46 Shutter LASER close 00:04:46 Received message from Camera: op=State serial=202872 00:04:46 GetSingleValue result=40 Value=cccccccc 00:04:46 SkyScan query 00:04:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:04:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:47 Parameters OK 00:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:47 Set A/D data flow result=40 00:04:47 Set A/D channel type result=40 00:04:47 Set A/D encoding result=40 00:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:47 Set channel filter=0.000000e+000 result=40 00:04:47 Config A/D Result=40 00:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:47 Get A/D filter: -9.255963e+061 result=40 00:04:47 Get A/D value=-858993460 result=40 00:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:04:47 Parameters OK 00:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:04:47 Set A/D data flow result=40 00:04:47 Set A/D channel type result=40 00:04:47 Set A/D encoding result=40 00:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:04:47 Set channel filter=0.000000e+000 result=40 00:04:47 Config A/D Result=40 00:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:04:47 Get A/D filter: -9.255963e+061 result=40 00:04:47 Get A/D value=-858993460 result=40 00:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:04:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:04:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:04:47 Aux= 00:04:47 Message to Camera, serial 202872 queued 00:05:24 Received message from Master: op=PointingHead serial=202885 00:05:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:05:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:05:24 Point started: ret=0 00:05:24 point_skyscan result=0 00:05:25 Check angles 00:05:25 SkyScan query 00:05:25 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.05<-13470 Statuses=0009 0009 [UTC 2018-12-17 00:05:25] 00:05:25 Msec=0 True Az=153.18 Ze=-22.05 Az status=0009 Ze status=0009 00:05:25 Check angles 00:05:25 SkyScan query 00:05:26 SkyScan query done: ret=0 az=135.855<-9057 ze=-1.065<-12071 Statuses=0009 0009 00:05:26 Msec=750 True Az=135.855 Ze=-1.065 Az status=0009 Ze status=0009 00:05:26 Check angles 00:05:26 SkyScan query 00:05:27 SkyScan query done: ret=0 az=118.2<-7880 ze=19.86<-10676 Statuses=0009 0009 00:05:27 Msec=1500 True Az=118.2 Ze=19.86 Az status=0009 Ze status=0009 00:05:27 Check angles 00:05:27 SkyScan query 00:05:27 SkyScan query done: ret=0 az=100.845<-6723 ze=40.875<-9275 Statuses=0009 0009 00:05:27 Msec=2250 True Az=100.845 Ze=40.875 Az status=0009 Ze status=0009 00:05:28 Check angles 00:05:28 SkyScan query 00:05:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 00:05:28 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 00:05:28 Check angles 00:05:28 SkyScan query 00:05:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:05:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:05:29 Message to Master queued w/err=0: serial=202885 error=0 00:05:34 Received message from Master: op=Filter serial=202886 00:05:34 Color wheel filter change from 0 to 0 00:05:34 FLIGetFilterPos err=0 currentPosition=0 00:05:34 FLIGetStepsRemaining err=0 RemainingSteps=0 00:05:34 Filter is already there-color wheel unchanged 00:05:34 Received message from Master: op=Shutter serial=202887 00:05:34 Shutter LASER close 00:05:34 Received message from Camera: op=State serial=202889 00:05:34 GetSingleValue result=40 Value=cccccccc 00:05:34 SkyScan query 00:05:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:05:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:35 Parameters OK 00:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:35 Set A/D data flow result=40 00:05:35 Set A/D channel type result=40 00:05:35 Set A/D encoding result=40 00:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:35 Set channel filter=0.000000e+000 result=40 00:05:35 Config A/D Result=40 00:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:35 Get A/D filter: -9.255963e+061 result=40 00:05:35 Get A/D value=-858993460 result=40 00:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:05:35 Parameters OK 00:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:05:35 Set A/D data flow result=40 00:05:35 Set A/D channel type result=40 00:05:35 Set A/D encoding result=40 00:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:05:35 Set channel filter=0.000000e+000 result=40 00:05:35 Config A/D Result=40 00:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:05:35 Get A/D filter: -9.255963e+061 result=40 00:05:35 Get A/D value=-858993460 result=40 00:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:05:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:05:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:05:35 Aux= 00:05:35 Message to Camera, serial 202889 queued 00:06:12 Received message from Master: op=PointingHead serial=202902 00:06:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:06:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:06:12 Point started: ret=0 00:06:12 point_skyscan result=0 00:06:13 Check angles 00:06:13 SkyScan query 00:06:13 SkyScan query done: ret=0 az=108.96<-7264 ze=38.475<-9435 Statuses=0009 0008 00:06:13 Msec=0 True Az=108.96 Ze=38.475 Az status=0009 Ze status=0008 00:06:13 Check angles 00:06:13 SkyScan query 00:06:14 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 00:06:14 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 00:06:14 Check angles 00:06:14 SkyScan query 00:06:15 SkyScan query done: ret=0 az=143.97<-9598 ze=38.505<-9433 Statuses=0009 0008 00:06:15 Msec=1500 True Az=143.97 Ze=38.505 Az status=0009 Ze status=0008 00:06:15 Check angles 00:06:15 SkyScan query 00:06:16 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 00:06:16 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 00:06:16 Check angles 00:06:16 SkyScan query 00:06:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:06:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:06:16 Check angles 00:06:16 SkyScan query 00:06:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:06:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:06:17 Message to Master queued w/err=0: serial=202902 error=0 00:06:22 Received message from Master: op=Filter serial=202903 00:06:22 Color wheel filter change from 0 to 0 00:06:22 FLIGetFilterPos err=0 currentPosition=0 00:06:22 FLIGetStepsRemaining err=0 RemainingSteps=0 00:06:22 Filter is already there-color wheel unchanged 00:06:22 Received message from Master: op=Shutter serial=202904 00:06:22 Shutter LASER close 00:06:22 Received message from Camera: op=State serial=202906 00:06:22 GetSingleValue result=40 Value=cccccccc 00:06:22 SkyScan query 00:06:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:06:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:23 Parameters OK 00:06:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:23 Set A/D data flow result=40 00:06:23 Set A/D channel type result=40 00:06:23 Set A/D encoding result=40 00:06:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:23 Set channel filter=0.000000e+000 result=40 00:06:23 Config A/D Result=40 00:06:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:23 Get A/D filter: -9.255963e+061 result=40 00:06:23 Get A/D value=-858993460 result=40 00:06:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:06:23 Parameters OK 00:06:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:06:23 Set A/D data flow result=40 00:06:23 Set A/D channel type result=40 00:06:23 Set A/D encoding result=40 00:06:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:06:23 Set channel filter=0.000000e+000 result=40 00:06:23 Config A/D Result=40 00:06:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:06:23 Get A/D filter: -9.255963e+061 result=40 00:06:23 Get A/D value=-858993460 result=40 00:06:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:06:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:06:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:06:23 Aux= 00:06:23 Message to Camera, serial 202906 queued 00:07:00 Received message from Master: op=PointingHead serial=202919 00:07:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:07:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:07:00 Point started: ret=0 00:07:00 point_skyscan result=0 00:07:01 Check angles 00:07:01 SkyScan query 00:07:01 SkyScan query done: ret=0 az=152.895<-10193 ze=8.52<-11432 Statuses=0009 0009 00:07:01 Msec=0 True Az=152.895 Ze=8.52 Az status=0009 Ze status=0009 00:07:02 Check angles 00:07:02 SkyScan query 00:07:02 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.435<-12829 Statuses=0009 0009 00:07:02 Msec=750 True Az=135.39 Ze=-12.435 Az status=0009 Ze status=0009 00:07:02 Check angles 00:07:02 SkyScan query 00:07:03 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.39<-14226 Statuses=0009 0009 00:07:03 Msec=1500 True Az=117.78 Ze=-33.39 Az status=0009 Ze status=0009 00:07:03 Check angles 00:07:03 SkyScan query 00:07:04 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.57<-15438 Statuses=0009 0009 00:07:04 Msec=2250 True Az=100.575 Ze=-51.57 Az status=0009 Ze status=0009 00:07:04 Check angles 00:07:04 SkyScan query 00:07:04 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 00:07:04 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 00:07:05 Check angles 00:07:05 SkyScan query 00:07:05 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 00:07:05 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 00:07:05 Message to Master queued w/err=0: serial=202919 error=0 00:07:10 Received message from Master: op=Filter serial=202920 00:07:10 Color wheel filter change from 0 to 0 00:07:10 FLIGetFilterPos err=0 currentPosition=0 00:07:10 FLIGetStepsRemaining err=0 RemainingSteps=0 00:07:10 Filter is already there-color wheel unchanged 00:07:10 Received message from Master: op=Shutter serial=202921 00:07:10 Shutter LASER close 00:07:10 Received message from Camera: op=State serial=202923 00:07:10 GetSingleValue result=40 Value=cccccccc 00:07:10 SkyScan query 00:07:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:07:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:11 Parameters OK 00:07:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:11 Set A/D data flow result=40 00:07:11 Set A/D channel type result=40 00:07:11 Set A/D encoding result=40 00:07:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:11 Set channel filter=0.000000e+000 result=40 00:07:11 Config A/D Result=40 00:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:11 Get A/D filter: -9.255963e+061 result=40 00:07:11 Get A/D value=-858993460 result=40 00:07:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:11 Parameters OK 00:07:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:11 Set A/D data flow result=40 00:07:11 Set A/D channel type result=40 00:07:11 Set A/D encoding result=40 00:07:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:11 Set channel filter=0.000000e+000 result=40 00:07:11 Config A/D Result=40 00:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:11 Get A/D filter: -9.255963e+061 result=40 00:07:11 Get A/D value=-858993460 result=40 00:07:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:07:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:07:11 Aux= 00:07:11 Message to Camera, serial 202923 queued 00:07:48 Received message from Master: op=PointingHead serial=202936 00:07:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:07:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:07:48 Point started: ret=0 00:07:48 point_skyscan result=0 00:07:49 Check angles 00:07:49 SkyScan query 00:07:49 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.495<-17433 Statuses=0009 0009 00:07:49 Msec=0 True Az=109.17 Ze=-81.495 Az status=0009 Ze status=0009 00:07:50 Check angles 00:07:50 SkyScan query 00:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 00:07:50 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 00:07:50 Check angles 00:07:50 SkyScan query 00:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.405<-20227 Statuses=0008 0009 00:07:51 Msec=1500 True Az=112.995 Ze=-123.405 Az status=0008 Ze status=0009 00:07:51 Check angles 00:07:51 SkyScan query 00:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 00:07:52 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 00:07:52 Check angles 00:07:52 SkyScan query 00:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 00:07:52 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 00:07:53 Check angles 00:07:53 SkyScan query 00:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:07:53 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:07:53 Message to Master queued w/err=0: serial=202936 error=0 00:07:58 Received message from Master: op=Filter serial=202937 00:07:58 Color wheel filter change from 0 to 0 00:07:58 FLIGetFilterPos err=0 currentPosition=0 00:07:58 FLIGetStepsRemaining err=0 RemainingSteps=0 00:07:58 Filter is already there-color wheel unchanged 00:07:58 Received message from Master: op=Shutter serial=202938 00:07:58 Shutter LASER open 00:07:59 Received message from Camera: op=State serial=202940 00:07:59 GetSingleValue result=40 Value=cccccccc 00:07:59 SkyScan query 00:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:07:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:59 Parameters OK 00:07:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:59 Set A/D data flow result=40 00:07:59 Set A/D channel type result=40 00:07:59 Set A/D encoding result=40 00:07:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:59 Set channel filter=0.000000e+000 result=40 00:07:59 Config A/D Result=40 00:07:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:59 Get A/D filter: -9.255963e+061 result=40 00:07:59 Get A/D value=-858993460 result=40 00:07:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:07:59 Parameters OK 00:07:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:07:59 Set A/D data flow result=40 00:07:59 Set A/D channel type result=40 00:07:59 Set A/D encoding result=40 00:07:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:07:59 Set channel filter=0.000000e+000 result=40 00:07:59 Config A/D Result=40 00:07:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:07:59 Get A/D filter: -9.255963e+061 result=40 00:07:59 Get A/D value=-858993460 result=40 00:07:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:07:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:07:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:07:59 Aux= 00:07:59 Message to Camera, serial 202940 queued 00:08:08 Received message from Master: op=Shutter serial=202950 00:08:08 Shutter LASER close 00:08:08 Received message from Master: op=PointingHead serial=202954 00:08:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:08:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:08:08 Point started: ret=0 00:08:08 point_skyscan result=0 00:08:09 Check angles 00:08:09 SkyScan query 00:08:10 SkyScan query done: ret=0 az=89.805<-5987 ze=157.095<-1527 Statuses=0009 0009 00:08:10 Msec=0 True Az=89.805 Ze=157.095 Az status=0009 Ze status=0009 00:08:10 Check angles 00:08:10 SkyScan query 00:08:10 SkyScan query done: ret=0 az=72.27<-4818 ze=136.14<-2924 Statuses=0009 0009 00:08:10 Msec=750 True Az=72.27 Ze=136.14 Az status=0009 Ze status=0009 00:08:11 Check angles 00:08:11 SkyScan query 00:08:11 SkyScan query done: ret=0 az=54.795<-3653 ze=115.215<-4319 Statuses=0009 0009 00:08:11 Msec=1500 True Az=54.795 Ze=115.215 Az status=0009 Ze status=0009 00:08:11 Check angles 00:08:11 SkyScan query 00:08:12 SkyScan query done: ret=0 az=41.01<-2734 ze=94.215<-5719 Statuses=0009 0009 00:08:12 Msec=2250 True Az=41.01 Ze=94.215 Az status=0009 Ze status=0009 00:08:12 Check angles 00:08:12 SkyScan query 00:08:13 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 00:08:13 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 00:08:13 Check angles 00:08:13 SkyScan query 00:08:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.755<-8483 Statuses=0008 0009 00:08:13 Msec=3750 True Az=40.995 Ze=52.755 Az status=0008 Ze status=0009 00:08:14 Check angles 00:08:14 SkyScan query 00:08:14 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 00:08:14 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 00:08:14 Message to Master queued w/err=0: serial=202954 error=0 00:08:19 Received message from Master: op=Filter serial=202955 00:08:19 Color wheel filter change from 0 to 0 00:08:19 FLIGetFilterPos err=0 currentPosition=0 00:08:19 FLIGetStepsRemaining err=0 RemainingSteps=0 00:08:19 Filter is already there-color wheel unchanged 00:08:19 Received message from Master: op=Shutter serial=202956 00:08:19 Shutter LASER close 00:08:20 Received message from Camera: op=State serial=202958 00:08:20 GetSingleValue result=40 Value=cccccccc 00:08:20 SkyScan query 00:08:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:08:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:20 Parameters OK 00:08:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:20 Set A/D data flow result=40 00:08:20 Set A/D channel type result=40 00:08:20 Set A/D encoding result=40 00:08:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:20 Set channel filter=0.000000e+000 result=40 00:08:20 Config A/D Result=40 00:08:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:20 Get A/D filter: -9.255963e+061 result=40 00:08:20 Get A/D value=-858993460 result=40 00:08:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:08:20 Parameters OK 00:08:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:08:20 Set A/D data flow result=40 00:08:20 Set A/D channel type result=40 00:08:20 Set A/D encoding result=40 00:08:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:08:20 Set channel filter=0.000000e+000 result=40 00:08:20 Config A/D Result=40 00:08:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:08:20 Get A/D filter: -9.255963e+061 result=40 00:08:20 Get A/D value=-858993460 result=40 00:08:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:08:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:08:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:08:20 Aux= 00:08:20 Message to Camera, serial 202958 queued 00:08:57 Received message from Master: op=PointingHead serial=202971 00:08:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:08:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:08:57 Point started: ret=0 00:08:57 point_skyscan result=0 00:08:58 Check angles 00:08:58 SkyScan query 00:08:59 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 00:08:59 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 00:08:59 Check angles 00:08:59 SkyScan query 00:08:59 SkyScan query done: ret=0 az=81.36<-5424 ze=66.495<-7567 Statuses=0009 0008 00:08:59 Msec=750 True Az=81.36 Ze=66.495 Az status=0009 Ze status=0008 00:09:00 Check angles 00:09:00 SkyScan query 00:09:00 SkyScan query done: ret=0 az=98.775<-6585 ze=66.495<-7567 Statuses=0009 0008 00:09:00 Msec=1500 True Az=98.775 Ze=66.495 Az status=0009 Ze status=0008 00:09:00 Check angles 00:09:00 SkyScan query 00:09:01 SkyScan query done: ret=0 az=116.325<-7755 ze=66.495<-7567 Statuses=0009 0008 00:09:01 Msec=2250 True Az=116.325 Ze=66.495 Az status=0009 Ze status=0008 00:09:01 Check angles 00:09:01 SkyScan query 00:09:02 SkyScan query done: ret=0 az=133.635<-8909 ze=66.495<-7567 Statuses=0009 0008 00:09:02 Msec=3000 True Az=133.635 Ze=66.495 Az status=0009 Ze status=0008 00:09:02 Check angles 00:09:02 SkyScan query 00:09:02 SkyScan query done: ret=0 az=151.095<-10073 ze=66.495<-7567 Statuses=0009 0008 00:09:02 Msec=3750 True Az=151.095 Ze=66.495 Az status=0009 Ze status=0008 00:09:03 Check angles 00:09:03 SkyScan query 00:09:03 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 00:09:03 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 00:09:03 Message to Master queued w/err=0: serial=202971 error=0 00:09:08 Received message from Master: op=Filter serial=202972 00:09:08 Color wheel filter change from 0 to 0 00:09:08 FLIGetFilterPos err=0 currentPosition=0 00:09:08 FLIGetStepsRemaining err=0 RemainingSteps=0 00:09:08 Filter is already there-color wheel unchanged 00:09:08 Received message from Master: op=Shutter serial=202973 00:09:08 Shutter LASER close 00:09:08 Received message from Camera: op=State serial=202975 00:09:08 GetSingleValue result=40 Value=cccccccc 00:09:08 SkyScan query 00:09:09 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:09:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:09 Parameters OK 00:09:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:09 Set A/D data flow result=40 00:09:09 Set A/D channel type result=40 00:09:09 Set A/D encoding result=40 00:09:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:09 Set channel filter=0.000000e+000 result=40 00:09:09 Config A/D Result=40 00:09:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:09 Get A/D filter: -9.255963e+061 result=40 00:09:09 Get A/D value=-858993460 result=40 00:09:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:09 Parameters OK 00:09:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:09 Set A/D data flow result=40 00:09:09 Set A/D channel type result=40 00:09:09 Set A/D encoding result=40 00:09:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:09 Set channel filter=0.000000e+000 result=40 00:09:09 Config A/D Result=40 00:09:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:09 Get A/D filter: -9.255963e+061 result=40 00:09:09 Get A/D value=-858993460 result=40 00:09:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:09 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:09:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:09:09 Aux= 00:09:09 Message to Camera, serial 202975 queued 00:09:46 Received message from Master: op=PointingHead serial=202988 00:09:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:09:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:09:46 Point started: ret=0 00:09:46 point_skyscan result=0 00:09:47 Check angles 00:09:47 SkyScan query 00:09:47 SkyScan query done: ret=0 az=134.775<-8985 ze=36.615<-9559 Statuses=0009 0009 00:09:47 Msec=0 True Az=134.775 Ze=36.615 Az status=0009 Ze status=0009 00:09:48 Check angles 00:09:48 SkyScan query 00:09:48 SkyScan query done: ret=0 az=117.045<-7803 ze=15.24<-10984 Statuses=0009 0009 00:09:48 Msec=750 True Az=117.045 Ze=15.24 Az status=0009 Ze status=0009 00:09:48 Check angles 00:09:48 SkyScan query 00:09:49 SkyScan query done: ret=0 az=99.315<-6621 ze=-6.27<-12418 Statuses=0009 0009 00:09:49 Msec=1500 True Az=99.315 Ze=-6.27 Az status=0009 Ze status=0009 00:09:49 Check angles 00:09:49 SkyScan query 00:09:50 SkyScan query done: ret=0 az=81.75<-5450 ze=-27.24<-13816 Statuses=0009 0009 00:09:50 Msec=2250 True Az=81.75 Ze=-27.24 Az status=0009 Ze status=0009 00:09:50 Check angles 00:09:50 SkyScan query 00:09:50 SkyScan query done: ret=0 az=63.96<-4264 ze=-38.595<-14573 Statuses=0009 0008 00:09:50 Msec=3000 True Az=63.96 Ze=-38.595 Az status=0009 Ze status=0008 00:09:51 Check angles 00:09:51 SkyScan query 00:09:51 SkyScan query done: ret=0 az=46.53<-3102 ze=-38.52<-14568 Statuses=0009 0008 00:09:51 Msec=3750 True Az=46.53 Ze=-38.52 Az status=0009 Ze status=0008 00:09:51 Check angles 00:09:51 SkyScan query 00:09:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:09:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:09:52 Message to Master queued w/err=0: serial=202988 error=0 00:09:57 Received message from Master: op=Filter serial=202989 00:09:57 Color wheel filter change from 0 to 0 00:09:57 FLIGetFilterPos err=0 currentPosition=0 00:09:57 FLIGetStepsRemaining err=0 RemainingSteps=0 00:09:57 Filter is already there-color wheel unchanged 00:09:57 Received message from Master: op=Shutter serial=202990 00:09:57 Shutter LASER close 00:09:57 Received message from Camera: op=State serial=202992 00:09:57 GetSingleValue result=40 Value=cccccccc 00:09:57 SkyScan query 00:09:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:09:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:58 Parameters OK 00:09:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:58 Set A/D data flow result=40 00:09:58 Set A/D channel type result=40 00:09:58 Set A/D encoding result=40 00:09:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:58 Set channel filter=0.000000e+000 result=40 00:09:58 Config A/D Result=40 00:09:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:58 Get A/D filter: -9.255963e+061 result=40 00:09:58 Get A/D value=-858993460 result=40 00:09:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:09:58 Parameters OK 00:09:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:09:58 Set A/D data flow result=40 00:09:58 Set A/D channel type result=40 00:09:58 Set A/D encoding result=40 00:09:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:09:58 Set channel filter=0.000000e+000 result=40 00:09:58 Config A/D Result=40 00:09:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:09:58 Get A/D filter: -9.255963e+061 result=40 00:09:58 Get A/D value=-858993460 result=40 00:09:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:09:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:09:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:09:58 Aux= 00:09:58 Message to Camera, serial 202992 queued 00:10:34 Received message from Master: op=PointingHead serial=203004 00:10:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:10:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:10:34 Point started: ret=0 00:10:34 point_skyscan result=0 00:10:35 Check angles 00:10:35 SkyScan query 00:10:35 SkyScan query done: ret=0 az=63.72<-4248 ze=-68.025<-16535 Statuses=0009 0009 00:10:35 Msec=0 True Az=63.72 Ze=-68.025 Az status=0009 Ze status=0009 00:10:35 Check angles 00:10:35 SkyScan query 00:10:36 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.52<-17968 Statuses=0009 0009 00:10:36 Msec=750 True Az=81.57 Ze=-89.52 Az status=0009 Ze status=0009 00:10:36 Check angles 00:10:36 SkyScan query 00:10:37 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.415<-19361 Statuses=0009 0009 00:10:37 Msec=1500 True Az=99.135 Ze=-110.415 Az status=0009 Ze status=0009 00:10:37 Check angles 00:10:37 SkyScan query 00:10:38 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.415<-20761 Statuses=0009 0009 00:10:38 Msec=2250 True Az=116.535 Ze=-131.415 Az status=0009 Ze status=0009 00:10:38 Check angles 00:10:38 SkyScan query 00:10:38 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.555<-21437 Statuses=0009 0008 00:10:38 Msec=3000 True Az=131.085 Ze=-141.555 Az status=0009 Ze status=0008 00:10:39 Check angles 00:10:39 SkyScan query 00:10:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:10:39 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:10:39 Message to Master queued w/err=0: serial=203004 error=0 00:10:44 Received message from Master: op=Filter serial=203005 00:10:44 Color wheel filter change from 0 to 0 00:10:44 FLIGetFilterPos err=0 currentPosition=0 00:10:44 FLIGetStepsRemaining err=0 RemainingSteps=0 00:10:44 Filter is already there-color wheel unchanged 00:10:44 Received message from Master: op=Shutter serial=203006 00:10:44 Shutter LASER close 00:10:44 Received message from Camera: op=State serial=203008 00:10:44 GetSingleValue result=40 Value=cccccccc 00:10:44 SkyScan query 00:10:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:10:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:45 Parameters OK 00:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:45 Set A/D data flow result=40 00:10:45 Set A/D channel type result=40 00:10:45 Set A/D encoding result=40 00:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:45 Set channel filter=0.000000e+000 result=40 00:10:45 Config A/D Result=40 00:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:45 Get A/D filter: -9.255963e+061 result=40 00:10:45 Get A/D value=-858993460 result=40 00:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:45 Parameters OK 00:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:45 Set A/D data flow result=40 00:10:45 Set A/D channel type result=40 00:10:45 Set A/D encoding result=40 00:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:45 Set channel filter=0.000000e+000 result=40 00:10:45 Config A/D Result=40 00:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:45 Get A/D filter: -9.255963e+061 result=40 00:10:45 Get A/D value=-858993460 result=40 00:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:10:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:10:45 Aux= 00:10:45 Message to Camera, serial 203008 queued 00:11:22 Received message from Master: op=PointingHead serial=203021 00:11:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:11:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:11:22 Point started: ret=0 00:11:22 point_skyscan result=0 00:11:23 Check angles 00:11:23 SkyScan query 00:11:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 00:11:23 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 00:11:24 Check angles 00:11:24 SkyScan query 00:11:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:11:24 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:11:24 Message to Master queued w/err=0: serial=203021 error=0 00:11:29 Received message from Master: op=Filter serial=203022 00:11:29 Color wheel filter change from 0 to 0 00:11:29 FLIGetFilterPos err=0 currentPosition=0 00:11:29 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:29 Filter is already there-color wheel unchanged 00:11:29 Received message from Master: op=Shutter serial=203023 00:11:29 Shutter LASER open 00:11:30 Received message from Camera: op=State serial=203025 00:11:30 GetSingleValue result=40 Value=cccccccc 00:11:30 SkyScan query 00:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:11:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:30 Parameters OK 00:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:30 Set A/D data flow result=40 00:11:30 Set A/D channel type result=40 00:11:30 Set A/D encoding result=40 00:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:30 Set channel filter=0.000000e+000 result=40 00:11:30 Config A/D Result=40 00:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:30 Get A/D filter: -9.255963e+061 result=40 00:11:30 Get A/D value=-858993460 result=40 00:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:30 Parameters OK 00:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:30 Set A/D data flow result=40 00:11:30 Set A/D channel type result=40 00:11:30 Set A/D encoding result=40 00:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:30 Set channel filter=0.000000e+000 result=40 00:11:30 Config A/D Result=40 00:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:30 Get A/D filter: -9.255963e+061 result=40 00:11:30 Get A/D value=-858993460 result=40 00:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:30 Aux= 00:11:30 Message to Camera, serial 203025 queued 00:11:39 Received message from Master: op=Shutter serial=203035 00:11:39 Shutter LASER close 00:11:39 Received message from Master: op=PointingHead serial=203039 00:11:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:11:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:11:39 Point started: ret=0 00:11:39 point_skyscan result=0 00:11:40 Check angles 00:11:40 SkyScan query 00:11:41 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.785<-21519 Statuses=0009 0009 00:11:41 Msec=0 True Az=136.395 Ze=-142.785 Az status=0009 Ze status=0009 00:11:41 Check angles 00:11:41 SkyScan query 00:11:42 SkyScan query done: ret=0 az=154.29<-10286 ze=-121.38<-20092 Statuses=0009 0009 00:11:42 Msec=750 True Az=154.29 Ze=-121.38 Az status=0009 Ze status=0009 00:11:42 Check angles 00:11:42 SkyScan query 00:11:42 SkyScan query done: ret=0 az=171.87<-11458 ze=-100.305<-18687 Statuses=0009 0009 00:11:42 Msec=1500 True Az=171.87 Ze=-100.305 Az status=0009 Ze status=0009 00:11:43 Check angles 00:11:43 SkyScan query 00:11:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.41<-17294 Statuses=0008 0009 00:11:43 Msec=2250 True Az=175.995 Ze=-79.41 Az status=0008 Ze status=0009 00:11:43 Check angles 00:11:43 SkyScan query 00:11:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 00:11:44 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 00:11:44 Check angles 00:11:44 SkyScan query 00:11:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:11:45 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:11:45 Message to Master queued w/err=0: serial=203039 error=0 00:11:50 Received message from Master: op=Filter serial=203040 00:11:50 Color wheel filter change from 0 to 0 00:11:50 FLIGetFilterPos err=0 currentPosition=0 00:11:50 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:50 Filter is already there-color wheel unchanged 00:11:50 Received message from Master: op=Shutter serial=203041 00:11:50 Shutter LASER close 00:11:50 Received message from Camera: op=State serial=203043 00:11:50 GetSingleValue result=40 Value=cccccccc 00:11:50 SkyScan query 00:11:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:11:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:51 Parameters OK 00:11:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:51 Set A/D data flow result=40 00:11:51 Set A/D channel type result=40 00:11:51 Set A/D encoding result=40 00:11:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:51 Set channel filter=0.000000e+000 result=40 00:11:51 Config A/D Result=40 00:11:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:51 Get A/D filter: -9.255963e+061 result=40 00:11:51 Get A/D value=-858993460 result=40 00:11:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:51 Parameters OK 00:11:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:51 Set A/D data flow result=40 00:11:51 Set A/D channel type result=40 00:11:51 Set A/D encoding result=40 00:11:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:51 Set channel filter=0.000000e+000 result=40 00:11:51 Config A/D Result=40 00:11:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:51 Get A/D filter: -9.255963e+061 result=40 00:11:51 Get A/D value=-858993460 result=40 00:11:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:51 Aux= 00:11:51 Message to Camera, serial 203043 queued 00:12:27 Received message from Master: op=PointingHead serial=203056 00:12:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:12:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:12:28 Point started: ret=0 00:12:28 point_skyscan result=0 00:12:28 Check angles 00:12:28 SkyScan query 00:12:29 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.99<-13466 Statuses=0009 0009 00:12:29 Msec=0 True Az=153.165 Ze=-21.99 Az status=0009 Ze status=0009 00:12:29 Check angles 00:12:29 SkyScan query 00:12:30 SkyScan query done: ret=0 az=135.795<-9053 ze=-0.99<-12066 Statuses=0009 0009 00:12:30 Msec=750 True Az=135.795 Ze=-0.99 Az status=0009 Ze status=0009 00:12:30 Check angles 00:12:30 SkyScan query 00:12:31 SkyScan query done: ret=0 az=118.2<-7880 ze=19.935<-10671 Statuses=0009 0009 00:12:31 Msec=1500 True Az=118.2 Ze=19.935 Az status=0009 Ze status=0009 00:12:31 Check angles 00:12:31 SkyScan query 00:12:31 SkyScan query done: ret=0 az=100.86<-6724 ze=40.95<-9270 Statuses=0009 0009 00:12:31 Msec=2250 True Az=100.86 Ze=40.95 Az status=0009 Ze status=0009 00:12:31 Check angles 00:12:31 SkyScan query 00:12:32 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 00:12:32 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 00:12:32 Check angles 00:12:32 SkyScan query 00:12:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:12:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:12:33 Message to Master queued w/err=0: serial=203056 error=0 00:12:38 Received message from Master: op=Filter serial=203057 00:12:38 Color wheel filter change from 0 to 0 00:12:38 FLIGetFilterPos err=0 currentPosition=0 00:12:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:12:38 Filter is already there-color wheel unchanged 00:12:38 Received message from Master: op=Shutter serial=203058 00:12:38 Shutter LASER close 00:12:38 Received message from Camera: op=State serial=203060 00:12:38 GetSingleValue result=40 Value=cccccccc 00:12:38 SkyScan query 00:12:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:12:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:39 Parameters OK 00:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:39 Set A/D data flow result=40 00:12:39 Set A/D channel type result=40 00:12:39 Set A/D encoding result=40 00:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:39 Set channel filter=0.000000e+000 result=40 00:12:39 Config A/D Result=40 00:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:39 Get A/D filter: -9.255963e+061 result=40 00:12:39 Get A/D value=-858993460 result=40 00:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:39 Parameters OK 00:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:39 Set A/D data flow result=40 00:12:39 Set A/D channel type result=40 00:12:39 Set A/D encoding result=40 00:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:39 Set channel filter=0.000000e+000 result=40 00:12:39 Config A/D Result=40 00:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:39 Get A/D filter: -9.255963e+061 result=40 00:12:39 Get A/D value=-858993460 result=40 00:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:12:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:12:39 Aux= 00:12:39 Message to Camera, serial 203060 queued 00:13:15 Received message from Master: op=PointingHead serial=203073 00:13:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:13:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:13:16 Point started: ret=0 00:13:16 point_skyscan result=0 00:13:16 Check angles 00:13:16 SkyScan query 00:13:17 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 00:13:17 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 00:13:17 Check angles 00:13:17 SkyScan query 00:13:18 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 00:13:18 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 00:13:18 Check angles 00:13:18 SkyScan query 00:13:19 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 00:13:19 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 00:13:19 Check angles 00:13:19 SkyScan query 00:13:19 SkyScan query done: ret=0 az=161.61<-10774 ze=38.505<-9433 Statuses=0009 0008 00:13:19 Msec=2250 True Az=161.61 Ze=38.505 Az status=0009 Ze status=0008 00:13:19 Check angles 00:13:19 SkyScan query 00:13:20 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:13:20 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:13:20 Check angles 00:13:20 SkyScan query 00:13:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:13:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:13:21 Message to Master queued w/err=0: serial=203073 error=0 00:13:26 Received message from Master: op=Filter serial=203074 00:13:26 Color wheel filter change from 0 to 0 00:13:26 FLIGetFilterPos err=0 currentPosition=0 00:13:26 FLIGetStepsRemaining err=0 RemainingSteps=0 00:13:26 Filter is already there-color wheel unchanged 00:13:26 Received message from Master: op=Shutter serial=203075 00:13:26 Shutter LASER close 00:13:26 Received message from Camera: op=State serial=203077 00:13:26 GetSingleValue result=40 Value=cccccccc 00:13:26 SkyScan query 00:13:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:13:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:27 Parameters OK 00:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:27 Set A/D data flow result=40 00:13:27 Set A/D channel type result=40 00:13:27 Set A/D encoding result=40 00:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:27 Set channel filter=0.000000e+000 result=40 00:13:27 Config A/D Result=40 00:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:27 Get A/D filter: -9.255963e+061 result=40 00:13:27 Get A/D value=-858993460 result=40 00:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:27 Parameters OK 00:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:27 Set A/D data flow result=40 00:13:27 Set A/D channel type result=40 00:13:27 Set A/D encoding result=40 00:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:27 Set channel filter=0.000000e+000 result=40 00:13:27 Config A/D Result=40 00:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:27 Get A/D filter: -9.255963e+061 result=40 00:13:27 Get A/D value=-858993460 result=40 00:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:13:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:13:27 Aux= 00:13:27 Message to Camera, serial 203077 queued 00:14:03 Received message from Master: op=PointingHead serial=203090 00:14:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:14:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:14:04 Point started: ret=0 00:14:04 point_skyscan result=0 00:14:05 Check angles 00:14:05 SkyScan query 00:14:05 SkyScan query done: ret=0 az=153.18<-10212 ze=9.015<-11399 Statuses=0009 0009 00:14:05 Msec=0 True Az=153.18 Ze=9.015 Az status=0009 Ze status=0009 00:14:05 Check angles 00:14:05 SkyScan query 00:14:06 SkyScan query done: ret=0 az=135.855<-9057 ze=-12.03<-12802 Statuses=0009 0009 00:14:06 Msec=750 True Az=135.855 Ze=-12.03 Az status=0009 Ze status=0009 00:14:06 Check angles 00:14:06 SkyScan query 00:14:07 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.345<-14223 Statuses=0009 0009 00:14:07 Msec=1500 True Az=117.78 Ze=-33.345 Az status=0009 Ze status=0009 00:14:07 Check angles 00:14:07 SkyScan query 00:14:07 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 00:14:07 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 00:14:08 Check angles 00:14:08 SkyScan query 00:14:08 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 00:14:08 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 00:14:08 Check angles 00:14:08 SkyScan query 00:14:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:14:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:14:09 Message to Master queued w/err=0: serial=203090 error=0 00:14:14 Received message from Master: op=Filter serial=203091 00:14:14 Color wheel filter change from 0 to 0 00:14:14 FLIGetFilterPos err=0 currentPosition=0 00:14:14 FLIGetStepsRemaining err=0 RemainingSteps=0 00:14:14 Filter is already there-color wheel unchanged 00:14:14 Received message from Master: op=Shutter serial=203092 00:14:14 Shutter LASER close 00:14:14 Received message from Camera: op=State serial=203094 00:14:14 GetSingleValue result=40 Value=cccccccc 00:14:14 SkyScan query 00:14:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:14:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:15 Parameters OK 00:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:15 Set A/D data flow result=40 00:14:15 Set A/D channel type result=40 00:14:15 Set A/D encoding result=40 00:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:15 Set channel filter=0.000000e+000 result=40 00:14:15 Config A/D Result=40 00:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:15 Get A/D filter: -9.255963e+061 result=40 00:14:15 Get A/D value=-858993460 result=40 00:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:15 Parameters OK 00:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:15 Set A/D data flow result=40 00:14:15 Set A/D channel type result=40 00:14:15 Set A/D encoding result=40 00:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:15 Set channel filter=0.000000e+000 result=40 00:14:15 Config A/D Result=40 00:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:15 Get A/D filter: -9.255963e+061 result=40 00:14:15 Get A/D value=-858993460 result=40 00:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:14:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:14:15 Aux= 00:14:15 Message to Camera, serial 203094 queued 00:14:52 Received message from Master: op=PointingHead serial=203107 00:14:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:14:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:14:52 Point started: ret=0 00:14:52 point_skyscan result=0 00:14:53 Check angles 00:14:53 SkyScan query 00:14:53 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.735<-17449 Statuses=0009 0009 00:14:53 Msec=0 True Az=109.335 Ze=-81.735 Az status=0009 Ze status=0009 00:14:53 Check angles 00:14:53 SkyScan query 00:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 00:14:54 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 00:14:54 Check angles 00:14:54 SkyScan query 00:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 00:14:55 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 00:14:55 Check angles 00:14:55 SkyScan query 00:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 00:14:56 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 00:14:56 Check angles 00:14:56 SkyScan query 00:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.48<-23032 Statuses=0008 0009 00:14:56 Msec=3000 True Az=112.995 Ze=-165.48 Az status=0008 Ze status=0009 00:14:56 Check angles 00:14:56 SkyScan query 00:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:14:57 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:14:57 Message to Master queued w/err=0: serial=203107 error=0 00:15:02 Received message from Master: op=Filter serial=203108 00:15:02 Color wheel filter change from 0 to 0 00:15:02 FLIGetFilterPos err=0 currentPosition=0 00:15:02 FLIGetStepsRemaining err=0 RemainingSteps=0 00:15:02 Filter is already there-color wheel unchanged 00:15:02 Received message from Master: op=Shutter serial=203109 00:15:02 Shutter LASER open 00:15:02 Received message from Camera: op=State serial=203111 00:15:02 GetSingleValue result=40 Value=cccccccc 00:15:02 SkyScan query 00:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:03 Parameters OK 00:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:03 Set A/D data flow result=40 00:15:03 Set A/D channel type result=40 00:15:03 Set A/D encoding result=40 00:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:03 Set channel filter=0.000000e+000 result=40 00:15:03 Config A/D Result=40 00:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:03 Get A/D filter: -9.255963e+061 result=40 00:15:03 Get A/D value=-858993460 result=40 00:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:03 Parameters OK 00:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:03 Set A/D data flow result=40 00:15:03 Set A/D channel type result=40 00:15:03 Set A/D encoding result=40 00:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:03 Set channel filter=0.000000e+000 result=40 00:15:03 Config A/D Result=40 00:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:03 Get A/D filter: -9.255963e+061 result=40 00:15:03 Get A/D value=-858993460 result=40 00:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:15:03 Aux= 00:15:03 Message to Camera, serial 203111 queued 00:15:11 Received message from Master: op=Shutter serial=203121 00:15:11 Shutter LASER close 00:15:12 Received message from Master: op=PointingHead serial=203125 00:15:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:15:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:15:12 Point started: ret=0 00:15:12 point_skyscan result=0 00:15:13 Check angles 00:15:13 SkyScan query 00:15:13 SkyScan query done: ret=0 az=89.79<-5986 ze=157.08<-1528 Statuses=0009 0009 00:15:13 Msec=0 True Az=89.79 Ze=157.08 Az status=0009 Ze status=0009 00:15:14 Check angles 00:15:14 SkyScan query [UTC 2018-12-17 00:15:14] 00:15:14 SkyScan query done: ret=0 az=72.255<-4817 ze=136.155<-2923 Statuses=0009 0009 00:15:14 Msec=750 True Az=72.255 Ze=136.155 Az status=0009 Ze status=0009 00:15:14 Check angles 00:15:14 SkyScan query 00:15:15 SkyScan query done: ret=0 az=54.48<-3632 ze=114.705<-4353 Statuses=0009 0009 00:15:15 Msec=1500 True Az=54.48 Ze=114.705 Az status=0009 Ze status=0009 00:15:15 Check angles 00:15:15 SkyScan query 00:15:16 SkyScan query done: ret=0 az=40.98<-2732 ze=93.81<-5746 Statuses=0009 0009 00:15:16 Msec=2250 True Az=40.98 Ze=93.81 Az status=0009 Ze status=0009 00:15:16 Check angles 00:15:16 SkyScan query 00:15:16 SkyScan query done: ret=0 az=40.995<-2733 ze=72.78<-7148 Statuses=0008 0009 00:15:16 Msec=3000 True Az=40.995 Ze=72.78 Az status=0008 Ze status=0009 00:15:17 Check angles 00:15:17 SkyScan query 00:15:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.23<-8518 Statuses=0008 0009 00:15:17 Msec=3750 True Az=40.995 Ze=52.23 Az status=0008 Ze status=0009 00:15:17 Check angles 00:15:17 SkyScan query 00:15:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:15:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:15:18 Message to Master queued w/err=0: serial=203125 error=0 00:15:23 Received message from Master: op=Filter serial=203126 00:15:23 Color wheel filter change from 0 to 0 00:15:23 FLIGetFilterPos err=0 currentPosition=0 00:15:23 FLIGetStepsRemaining err=0 RemainingSteps=0 00:15:23 Filter is already there-color wheel unchanged 00:15:23 Received message from Master: op=Shutter serial=203127 00:15:23 Shutter LASER close 00:15:23 Received message from Camera: op=State serial=203129 00:15:23 GetSingleValue result=40 Value=cccccccc 00:15:23 SkyScan query 00:15:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:15:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:24 Parameters OK 00:15:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:24 Set A/D data flow result=40 00:15:24 Set A/D channel type result=40 00:15:24 Set A/D encoding result=40 00:15:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:24 Set channel filter=0.000000e+000 result=40 00:15:24 Config A/D Result=40 00:15:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:24 Get A/D filter: -9.255963e+061 result=40 00:15:24 Get A/D value=-858993460 result=40 00:15:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:24 Parameters OK 00:15:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:24 Set A/D data flow result=40 00:15:24 Set A/D channel type result=40 00:15:24 Set A/D encoding result=40 00:15:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:24 Set channel filter=0.000000e+000 result=40 00:15:24 Config A/D Result=40 00:15:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:24 Get A/D filter: -9.255963e+061 result=40 00:15:24 Get A/D value=-858993460 result=40 00:15:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:15:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:15:24 Aux= 00:15:24 Message to Camera, serial 203129 queued 00:15:27 Received message from Master: op=Identify serial=203130 [UTC 2018-12-17 00:15:52] 00:16:00 Received message from Master: op=PointingHead serial=203144 00:16:00 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:16:00 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:16:00 Point started: ret=0 00:16:00 point_skyscan result=0 00:16:01 Check angles 00:16:01 SkyScan query 00:16:02 SkyScan query done: ret=0 az=64.35<-4290 ze=66.54<-7564 Statuses=0009 0008 00:16:02 Msec=0 True Az=64.35 Ze=66.54 Az status=0009 Ze status=0008 00:16:02 Check angles 00:16:02 SkyScan query 00:16:02 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 00:16:02 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 00:16:02 Check angles 00:16:02 SkyScan query 00:16:03 SkyScan query done: ret=0 az=99.285<-6619 ze=66.495<-7567 Statuses=0009 0008 00:16:03 Msec=1500 True Az=99.285 Ze=66.495 Az status=0009 Ze status=0008 00:16:03 Check angles 00:16:03 SkyScan query 00:16:04 SkyScan query done: ret=0 az=116.7<-7780 ze=66.495<-7567 Statuses=0009 0008 00:16:04 Msec=2250 True Az=116.7 Ze=66.495 Az status=0009 Ze status=0008 00:16:04 Check angles 00:16:04 SkyScan query 00:16:05 SkyScan query done: ret=0 az=134.145<-8943 ze=66.495<-7567 Statuses=0009 0008 00:16:05 Msec=3000 True Az=134.145 Ze=66.495 Az status=0009 Ze status=0008 00:16:05 Check angles 00:16:05 SkyScan query 00:16:05 SkyScan query done: ret=0 az=151.545<-10103 ze=66.495<-7567 Statuses=0009 0008 00:16:05 Msec=3750 True Az=151.545 Ze=66.495 Az status=0009 Ze status=0008 00:16:05 Check angles 00:16:05 SkyScan query 00:16:06 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 00:16:06 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 00:16:06 Message to Master queued w/err=0: serial=203144 error=0 00:16:11 Received message from Master: op=Filter serial=203145 00:16:11 Color wheel filter change from 0 to 0 00:16:11 FLIGetFilterPos err=0 currentPosition=0 00:16:11 FLIGetStepsRemaining err=0 RemainingSteps=0 00:16:11 Filter is already there-color wheel unchanged 00:16:11 Received message from Master: op=Shutter serial=203146 00:16:11 Shutter LASER close 00:16:11 Received message from Camera: op=State serial=203148 00:16:11 GetSingleValue result=40 Value=cccccccc 00:16:11 SkyScan query 00:16:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:16:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:12 Parameters OK 00:16:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:12 Set A/D data flow result=40 00:16:12 Set A/D channel type result=40 00:16:12 Set A/D encoding result=40 00:16:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:12 Set channel filter=0.000000e+000 result=40 00:16:12 Config A/D Result=40 00:16:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:12 Get A/D filter: -9.255963e+061 result=40 00:16:12 Get A/D value=-858993460 result=40 00:16:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:12 Parameters OK 00:16:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:12 Set A/D data flow result=40 00:16:12 Set A/D channel type result=40 00:16:12 Set A/D encoding result=40 00:16:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:12 Set channel filter=0.000000e+000 result=40 00:16:12 Config A/D Result=40 00:16:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:12 Get A/D filter: -9.255963e+061 result=40 00:16:12 Get A/D value=-858993460 result=40 00:16:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:12 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:16:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:16:12 Aux= 00:16:12 Message to Camera, serial 203148 queued 00:16:49 Received message from Master: op=PointingHead serial=203161 00:16:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:16:49 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:16:49 Point started: ret=0 00:16:49 point_skyscan result=0 00:16:50 Check angles 00:16:50 SkyScan query 00:16:50 SkyScan query done: ret=0 az=134.535<-8969 ze=36.195<-9587 Statuses=0009 0009 00:16:50 Msec=0 True Az=134.535 Ze=36.195 Az status=0009 Ze status=0009 00:16:51 Check angles 00:16:51 SkyScan query 00:16:51 SkyScan query done: ret=0 az=117.045<-7803 ze=15.285<-10981 Statuses=0009 0009 00:16:51 Msec=750 True Az=117.045 Ze=15.285 Az status=0009 Ze status=0009 00:16:51 Check angles 00:16:51 SkyScan query 00:16:52 SkyScan query done: ret=0 az=99.6<-6640 ze=-5.745<-12383 Statuses=0009 0009 00:16:52 Msec=1500 True Az=99.6 Ze=-5.745 Az status=0009 Ze status=0009 00:16:52 Check angles 00:16:52 SkyScan query 00:16:53 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.715<-13781 Statuses=0009 0009 00:16:53 Msec=2250 True Az=82.185 Ze=-26.715 Az status=0009 Ze status=0009 00:16:53 Check angles 00:16:53 SkyScan query 00:16:53 SkyScan query done: ret=0 az=64.53<-4302 ze=-38.595<-14573 Statuses=0009 0008 00:16:53 Msec=3000 True Az=64.53 Ze=-38.595 Az status=0009 Ze status=0008 00:16:54 Check angles 00:16:54 SkyScan query 00:16:54 SkyScan query done: ret=0 az=47.175<-3145 ze=-38.52<-14568 Statuses=0009 0008 00:16:54 Msec=3750 True Az=47.175 Ze=-38.52 Az status=0009 Ze status=0008 00:16:54 Check angles 00:16:54 SkyScan query 00:16:55 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 00:16:55 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 00:16:55 Message to Master queued w/err=0: serial=203161 error=0 00:17:00 Received message from Master: op=Filter serial=203162 00:17:00 Color wheel filter change from 0 to 0 00:17:00 FLIGetFilterPos err=0 currentPosition=0 00:17:00 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:00 Filter is already there-color wheel unchanged 00:17:00 Received message from Master: op=Shutter serial=203163 00:17:00 Shutter LASER close 00:17:00 Received message from Camera: op=State serial=203165 00:17:00 GetSingleValue result=40 Value=cccccccc 00:17:00 SkyScan query 00:17:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:17:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:01 Parameters OK 00:17:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:01 Set A/D data flow result=40 00:17:01 Set A/D channel type result=40 00:17:01 Set A/D encoding result=40 00:17:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:01 Set channel filter=0.000000e+000 result=40 00:17:01 Config A/D Result=40 00:17:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:01 Get A/D filter: -9.255963e+061 result=40 00:17:01 Get A/D value=-858993460 result=40 00:17:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:01 Parameters OK 00:17:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:01 Set A/D data flow result=40 00:17:01 Set A/D channel type result=40 00:17:01 Set A/D encoding result=40 00:17:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:01 Set channel filter=0.000000e+000 result=40 00:17:01 Config A/D Result=40 00:17:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:01 Get A/D filter: -9.255963e+061 result=40 00:17:01 Get A/D value=-858993460 result=40 00:17:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:01 Aux= 00:17:01 Message to Camera, serial 203165 queued 00:17:37 Received message from Master: op=PointingHead serial=203178 00:17:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:17:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:17:38 Point started: ret=0 00:17:38 point_skyscan result=0 00:17:39 Check angles 00:17:39 SkyScan query 00:17:39 SkyScan query done: ret=0 az=63.765<-4251 ze=-67.995<-16533 Statuses=0009 0009 00:17:39 Msec=0 True Az=63.765 Ze=-67.995 Az status=0009 Ze status=0009 00:17:39 Check angles 00:17:39 SkyScan query 00:17:40 SkyScan query done: ret=0 az=81.15<-5410 ze=-88.995<-17933 Statuses=0009 0009 00:17:40 Msec=750 True Az=81.15 Ze=-88.995 Az status=0009 Ze status=0009 00:17:40 Check angles 00:17:40 SkyScan query 00:17:41 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.4<-19360 Statuses=0009 0009 00:17:41 Msec=1500 True Az=99.135 Ze=-110.4 Az status=0009 Ze status=0009 00:17:41 Check angles 00:17:41 SkyScan query 00:17:41 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.73<-20782 Statuses=0009 0009 00:17:41 Msec=2250 True Az=116.865 Ze=-131.73 Az status=0009 Ze status=0009 00:17:42 Check angles 00:17:42 SkyScan query 00:17:42 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 00:17:42 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 00:17:42 Check angles 00:17:42 SkyScan query 00:17:43 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:17:43 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:17:43 Message to Master queued w/err=0: serial=203178 error=0 00:17:48 Received message from Master: op=Filter serial=203179 00:17:48 Color wheel filter change from 0 to 0 00:17:48 FLIGetFilterPos err=0 currentPosition=0 00:17:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:48 Filter is already there-color wheel unchanged 00:17:48 Received message from Master: op=Shutter serial=203180 00:17:48 Shutter LASER close 00:17:48 Received message from Camera: op=State serial=203182 00:17:48 GetSingleValue result=40 Value=cccccccc 00:17:48 SkyScan query 00:17:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:17:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:49 Parameters OK 00:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:49 Set A/D data flow result=40 00:17:49 Set A/D channel type result=40 00:17:49 Set A/D encoding result=40 00:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:49 Set channel filter=0.000000e+000 result=40 00:17:49 Config A/D Result=40 00:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:49 Get A/D filter: -9.255963e+061 result=40 00:17:49 Get A/D value=-858993460 result=40 00:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:49 Parameters OK 00:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:49 Set A/D data flow result=40 00:17:49 Set A/D channel type result=40 00:17:49 Set A/D encoding result=40 00:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:49 Set channel filter=0.000000e+000 result=40 00:17:49 Config A/D Result=40 00:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:49 Get A/D filter: -9.255963e+061 result=40 00:17:49 Get A/D value=-858993460 result=40 00:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:49 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:49 Aux= 00:17:49 Message to Camera, serial 203182 queued 00:18:26 Received message from Master: op=PointingHead serial=203195 00:18:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:18:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:18:26 Point started: ret=0 00:18:26 point_skyscan result=0 00:18:27 Check angles 00:18:27 SkyScan query 00:18:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0009 0009 00:18:27 Msec=0 True Az=112.995 Ze=-170.955 Az status=0009 Ze status=0009 00:18:27 Check angles 00:18:27 SkyScan query 00:18:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:18:28 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:18:28 Message to Master queued w/err=0: serial=203195 error=0 00:18:33 Received message from Master: op=Filter serial=203196 00:18:33 Color wheel filter change from 0 to 0 00:18:33 FLIGetFilterPos err=0 currentPosition=0 00:18:33 FLIGetStepsRemaining err=0 RemainingSteps=0 00:18:33 Filter is already there-color wheel unchanged 00:18:33 Received message from Master: op=Shutter serial=203197 00:18:33 Shutter LASER open 00:18:33 Received message from Camera: op=State serial=203199 00:18:33 GetSingleValue result=40 Value=cccccccc 00:18:33 SkyScan query 00:18:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:18:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:34 Parameters OK 00:18:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:34 Set A/D data flow result=40 00:18:34 Set A/D channel type result=40 00:18:34 Set A/D encoding result=40 00:18:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:34 Set channel filter=0.000000e+000 result=40 00:18:34 Config A/D Result=40 00:18:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:34 Get A/D filter: -9.255963e+061 result=40 00:18:34 Get A/D value=-858993460 result=40 00:18:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:34 Parameters OK 00:18:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:34 Set A/D data flow result=40 00:18:34 Set A/D channel type result=40 00:18:34 Set A/D encoding result=40 00:18:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:34 Set channel filter=0.000000e+000 result=40 00:18:34 Config A/D Result=40 00:18:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:34 Get A/D filter: -9.255963e+061 result=40 00:18:34 Get A/D value=-858993460 result=40 00:18:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:18:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:18:34 Aux= 00:18:34 Message to Camera, serial 203199 queued 00:18:42 Received message from Master: op=Shutter serial=203209 00:18:42 Shutter LASER close 00:18:43 Received message from Master: op=PointingHead serial=203213 00:18:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:18:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:18:43 Point started: ret=0 00:18:43 point_skyscan result=0 00:18:44 Check angles 00:18:44 SkyScan query 00:18:45 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.4<-21560 Statuses=0009 0009 00:18:45 Msec=0 True Az=135.93 Ze=-143.4 Az status=0009 Ze status=0009 00:18:45 Check angles 00:18:45 SkyScan query 00:18:45 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.4<-20160 Statuses=0009 0009 00:18:45 Msec=750 True Az=153.345 Ze=-122.4 Az status=0009 Ze status=0009 00:18:46 Check angles 00:18:46 SkyScan query 00:18:46 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.535<-18769 Statuses=0009 0009 00:18:46 Msec=1500 True Az=170.85 Ze=-101.535 Az status=0009 Ze status=0009 00:18:46 Check angles 00:18:46 SkyScan query 00:18:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.52<-17368 Statuses=0008 0009 00:18:47 Msec=2250 True Az=175.995 Ze=-80.52 Az status=0008 Ze status=0009 00:18:47 Check angles 00:18:47 SkyScan query 00:18:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.55<-15970 Statuses=0008 0009 00:18:48 Msec=3000 True Az=175.995 Ze=-59.55 Az status=0008 Ze status=0009 00:18:48 Check angles 00:18:48 SkyScan query 00:18:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:18:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:18:48 Message to Master queued w/err=0: serial=203213 error=0 00:18:53 Received message from Master: op=Filter serial=203214 00:18:53 Color wheel filter change from 0 to 0 00:18:53 FLIGetFilterPos err=0 currentPosition=0 00:18:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:18:53 Filter is already there-color wheel unchanged 00:18:54 Received message from Master: op=Shutter serial=203215 00:18:54 Shutter LASER close 00:18:54 Received message from Camera: op=State serial=203217 00:18:54 GetSingleValue result=40 Value=cccccccc 00:18:54 SkyScan query 00:18:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:18:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:54 Parameters OK 00:18:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:54 Set A/D data flow result=40 00:18:54 Set A/D channel type result=40 00:18:54 Set A/D encoding result=40 00:18:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:54 Set channel filter=0.000000e+000 result=40 00:18:54 Config A/D Result=40 00:18:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:54 Get A/D filter: -9.255963e+061 result=40 00:18:54 Get A/D value=-858993460 result=40 00:18:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:54 Parameters OK 00:18:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:54 Set A/D data flow result=40 00:18:54 Set A/D channel type result=40 00:18:54 Set A/D encoding result=40 00:18:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:54 Set channel filter=0.000000e+000 result=40 00:18:54 Config A/D Result=40 00:18:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:54 Get A/D filter: -9.255963e+061 result=40 00:18:54 Get A/D value=-858993460 result=40 00:18:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:18:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:18:54 Aux= 00:18:54 Message to Camera, serial 203217 queued 00:19:31 Received message from Master: op=PointingHead serial=203230 00:19:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:19:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:19:31 Point started: ret=0 00:19:31 point_skyscan result=0 00:19:32 Check angles 00:19:32 SkyScan query 00:19:33 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.12<-13408 Statuses=0009 0009 00:19:33 Msec=0 True Az=152.595 Ze=-21.12 Az status=0009 Ze status=0009 00:19:33 Check angles 00:19:33 SkyScan query 00:19:34 SkyScan query done: ret=0 az=135.06<-9004 ze=-0.225<-12015 Statuses=0009 0009 00:19:34 Msec=750 True Az=135.06 Ze=-0.225 Az status=0009 Ze status=0009 00:19:34 Check angles 00:19:34 SkyScan query 00:19:34 SkyScan query done: ret=0 az=117.15<-7810 ze=21.21<-10586 Statuses=0009 0009 00:19:34 Msec=1500 True Az=117.15 Ze=21.21 Az status=0009 Ze status=0009 00:19:35 Check angles 00:19:35 SkyScan query 00:19:35 SkyScan query done: ret=0 az=99.69<-6646 ze=42.09<-9194 Statuses=0009 0009 00:19:35 Msec=2250 True Az=99.69 Ze=42.09 Az status=0009 Ze status=0009 00:19:35 Check angles 00:19:35 SkyScan query 00:19:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 00:19:36 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 00:19:36 Check angles 00:19:36 SkyScan query 00:19:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:19:37 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 00:19:37 Message to Master queued w/err=0: serial=203230 error=0 00:19:42 Received message from Master: op=Filter serial=203231 00:19:42 Color wheel filter change from 0 to 0 00:19:42 FLIGetFilterPos err=0 currentPosition=0 00:19:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:19:42 Filter is already there-color wheel unchanged 00:19:42 Received message from Master: op=Shutter serial=203232 00:19:42 Shutter LASER close 00:19:42 Received message from Camera: op=State serial=203234 00:19:42 GetSingleValue result=40 Value=cccccccc 00:19:42 SkyScan query 00:19:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:19:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:42 Parameters OK 00:19:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:42 Set A/D data flow result=40 00:19:42 Set A/D channel type result=40 00:19:42 Set A/D encoding result=40 00:19:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:42 Set channel filter=0.000000e+000 result=40 00:19:42 Config A/D Result=40 00:19:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:42 Get A/D filter: -9.255963e+061 result=40 00:19:42 Get A/D value=-858993460 result=40 00:19:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:42 Parameters OK 00:19:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:42 Set A/D data flow result=40 00:19:42 Set A/D channel type result=40 00:19:42 Set A/D encoding result=40 00:19:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:42 Set channel filter=0.000000e+000 result=40 00:19:42 Config A/D Result=40 00:19:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:42 Get A/D filter: -9.255963e+061 result=40 00:19:42 Get A/D value=-858993460 result=40 00:19:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:19:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:19:42 Aux= 00:19:42 Message to Camera, serial 203234 queued 00:20:19 Received message from Master: op=PointingHead serial=203247 00:20:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:20:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:20:20 Point started: ret=0 00:20:20 point_skyscan result=0 00:20:20 Check angles 00:20:20 SkyScan query 00:20:21 SkyScan query done: ret=0 az=109.11<-7274 ze=38.475<-9435 Statuses=0009 0008 00:20:21 Msec=0 True Az=109.11 Ze=38.475 Az status=0009 Ze status=0008 00:20:21 Check angles 00:20:21 SkyScan query 00:20:22 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 00:20:22 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 00:20:22 Check angles 00:20:22 SkyScan query 00:20:22 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 00:20:22 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 00:20:23 Check angles 00:20:23 SkyScan query 00:20:23 SkyScan query done: ret=0 az=162.195<-10813 ze=38.505<-9433 Statuses=0009 0008 00:20:23 Msec=2250 True Az=162.195 Ze=38.505 Az status=0009 Ze status=0008 00:20:23 Check angles 00:20:23 SkyScan query 00:20:24 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 00:20:24 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 00:20:24 Check angles 00:20:24 SkyScan query 00:20:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:20:25 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:20:25 Message to Master queued w/err=0: serial=203247 error=0 00:20:30 Received message from Master: op=Filter serial=203248 00:20:30 Color wheel filter change from 0 to 0 00:20:30 FLIGetFilterPos err=0 currentPosition=0 00:20:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:30 Filter is already there-color wheel unchanged 00:20:30 Received message from Master: op=Shutter serial=203249 00:20:30 Shutter LASER close 00:20:30 Received message from Camera: op=State serial=203251 00:20:30 GetSingleValue result=40 Value=cccccccc 00:20:30 SkyScan query 00:20:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:20:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:31 Parameters OK 00:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:31 Set A/D data flow result=40 00:20:31 Set A/D channel type result=40 00:20:31 Set A/D encoding result=40 00:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:31 Set channel filter=0.000000e+000 result=40 00:20:31 Config A/D Result=40 00:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:31 Get A/D filter: -9.255963e+061 result=40 00:20:31 Get A/D value=-858993460 result=40 00:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:31 Parameters OK 00:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:31 Set A/D data flow result=40 00:20:31 Set A/D channel type result=40 00:20:31 Set A/D encoding result=40 00:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:31 Set channel filter=0.000000e+000 result=40 00:20:31 Config A/D Result=40 00:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:31 Get A/D filter: -9.255963e+061 result=40 00:20:31 Get A/D value=-858993460 result=40 00:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:31 Aux= 00:20:31 Message to Camera, serial 203251 queued 00:21:07 Received message from Master: op=PointingHead serial=203264 00:21:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:21:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:21:08 Point started: ret=0 00:21:08 point_skyscan result=0 00:21:09 Check angles 00:21:09 SkyScan query 00:21:09 SkyScan query done: ret=0 az=152.73<-10182 ze=8.205<-11453 Statuses=0009 0009 00:21:09 Msec=0 True Az=152.73 Ze=8.205 Az status=0009 Ze status=0009 00:21:09 Check angles 00:21:09 SkyScan query 00:21:10 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.615<-12841 Statuses=0009 0009 00:21:10 Msec=750 True Az=135.18 Ze=-12.615 Az status=0009 Ze status=0009 00:21:10 Check angles 00:21:10 SkyScan query 00:21:11 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.645<-14243 Statuses=0009 0009 00:21:11 Msec=1500 True Az=117.6 Ze=-33.645 Az status=0009 Ze status=0009 00:21:11 Check angles 00:21:11 SkyScan query 00:21:11 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.57<-15438 Statuses=0009 0009 00:21:11 Msec=2250 True Az=100.32 Ze=-51.57 Az status=0009 Ze status=0009 00:21:12 Check angles 00:21:12 SkyScan query 00:21:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 00:21:12 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 00:21:12 Check angles 00:21:12 SkyScan query 00:21:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:21:13 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:21:13 Message to Master queued w/err=0: serial=203264 error=0 00:21:18 Received message from Master: op=Filter serial=203265 00:21:18 Color wheel filter change from 0 to 0 00:21:18 FLIGetFilterPos err=0 currentPosition=0 00:21:18 FLIGetStepsRemaining err=0 RemainingSteps=0 00:21:18 Filter is already there-color wheel unchanged 00:21:18 Received message from Master: op=Shutter serial=203266 00:21:18 Shutter LASER close 00:21:18 Received message from Camera: op=State serial=203268 00:21:18 GetSingleValue result=40 Value=cccccccc 00:21:18 SkyScan query 00:21:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:21:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:19 Parameters OK 00:21:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:19 Set A/D data flow result=40 00:21:19 Set A/D channel type result=40 00:21:19 Set A/D encoding result=40 00:21:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:19 Set channel filter=0.000000e+000 result=40 00:21:19 Config A/D Result=40 00:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:19 Get A/D filter: -9.255963e+061 result=40 00:21:19 Get A/D value=-858993460 result=40 00:21:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:19 Parameters OK 00:21:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:19 Set A/D data flow result=40 00:21:19 Set A/D channel type result=40 00:21:19 Set A/D encoding result=40 00:21:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:19 Set channel filter=0.000000e+000 result=40 00:21:19 Config A/D Result=40 00:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:19 Get A/D filter: -9.255963e+061 result=40 00:21:19 Get A/D value=-858993460 result=40 00:21:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:21:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:21:19 Aux= 00:21:19 Message to Camera, serial 203268 queued 00:21:56 Received message from Master: op=PointingHead serial=203281 00:21:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:21:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:21:56 Point started: ret=0 00:21:56 point_skyscan result=0 00:21:57 Check angles 00:21:57 SkyScan query 00:21:57 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.465<-17431 Statuses=0009 0009 00:21:57 Msec=0 True Az=109.125 Ze=-81.465 Az status=0009 Ze status=0009 00:21:57 Check angles 00:21:57 SkyScan query 00:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 00:21:58 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 00:21:58 Check angles 00:21:58 SkyScan query 00:21:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.825<-20255 Statuses=0008 0009 00:21:59 Msec=1500 True Az=112.995 Ze=-123.825 Az status=0008 Ze status=0009 00:21:59 Check angles 00:21:59 SkyScan query 00:21:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 00:21:59 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 00:22:00 Check angles 00:22:00 SkyScan query 00:22:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.69<-23046 Statuses=0008 0009 00:22:00 Msec=3000 True Az=112.995 Ze=-165.69 Az status=0008 Ze status=0009 00:22:00 Check angles 00:22:00 SkyScan query 00:22:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:22:01 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:22:01 Message to Master queued w/err=0: serial=203281 error=0 00:22:06 Received message from Master: op=Filter serial=203282 00:22:06 Color wheel filter change from 0 to 0 00:22:06 FLIGetFilterPos err=0 currentPosition=0 00:22:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:22:06 Filter is already there-color wheel unchanged 00:22:06 Received message from Master: op=Shutter serial=203283 00:22:06 Shutter LASER open 00:22:06 Received message from Camera: op=State serial=203285 00:22:06 GetSingleValue result=40 Value=cccccccc 00:22:06 SkyScan query 00:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:22:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:07 Parameters OK 00:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:07 Set A/D data flow result=40 00:22:07 Set A/D channel type result=40 00:22:07 Set A/D encoding result=40 00:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:07 Set channel filter=0.000000e+000 result=40 00:22:07 Config A/D Result=40 00:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:07 Get A/D filter: -9.255963e+061 result=40 00:22:07 Get A/D value=-858993460 result=40 00:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:07 Parameters OK 00:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:07 Set A/D data flow result=40 00:22:07 Set A/D channel type result=40 00:22:07 Set A/D encoding result=40 00:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:07 Set channel filter=0.000000e+000 result=40 00:22:07 Config A/D Result=40 00:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:07 Get A/D filter: -9.255963e+061 result=40 00:22:07 Get A/D value=-858993460 result=40 00:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:22:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:22:07 Aux= 00:22:07 Message to Camera, serial 203285 queued 00:22:15 Received message from Master: op=Shutter serial=203295 00:22:15 Shutter LASER close 00:22:16 Received message from Master: op=PointingHead serial=203299 00:22:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:22:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:22:16 Point started: ret=0 00:22:16 point_skyscan result=0 00:22:17 Check angles 00:22:17 SkyScan query 00:22:17 SkyScan query done: ret=0 az=90<-6000 ze=157.35<-1510 Statuses=0009 0009 00:22:17 Msec=0 True Az=90 Ze=157.35 Az status=0009 Ze status=0009 00:22:18 Check angles 00:22:18 SkyScan query 00:22:18 SkyScan query done: ret=0 az=72.495<-4833 ze=136.365<-2909 Statuses=0009 0009 00:22:18 Msec=750 True Az=72.495 Ze=136.365 Az status=0009 Ze status=0009 00:22:18 Check angles 00:22:18 SkyScan query 00:22:19 SkyScan query done: ret=0 az=54.735<-3649 ze=115.005<-4333 Statuses=0009 0009 00:22:19 Msec=1500 True Az=54.735 Ze=115.005 Az status=0009 Ze status=0009 00:22:19 Check angles 00:22:19 SkyScan query 00:22:20 SkyScan query done: ret=0 az=41.01<-2734 ze=93.6<-5760 Statuses=0009 0009 00:22:20 Msec=2250 True Az=41.01 Ze=93.6 Az status=0009 Ze status=0009 00:22:20 Check angles 00:22:20 SkyScan query 00:22:20 SkyScan query done: ret=0 az=40.98<-2732 ze=72.585<-7161 Statuses=0008 0009 00:22:20 Msec=3000 True Az=40.98 Ze=72.585 Az status=0008 Ze status=0009 00:22:21 Check angles 00:22:21 SkyScan query 00:22:21 SkyScan query done: ret=0 az=40.98<-2732 ze=52.38<-8508 Statuses=0008 0009 00:22:21 Msec=3750 True Az=40.98 Ze=52.38 Az status=0008 Ze status=0009 00:22:21 Check angles 00:22:21 SkyScan query 00:22:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:22:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:22:22 Message to Master queued w/err=0: serial=203299 error=0 00:22:27 Received message from Master: op=Filter serial=203300 00:22:27 Color wheel filter change from 0 to 0 00:22:27 FLIGetFilterPos err=0 currentPosition=0 00:22:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:22:27 Filter is already there-color wheel unchanged 00:22:27 Received message from Master: op=Shutter serial=203301 00:22:27 Shutter LASER close 00:22:27 Received message from Camera: op=State serial=203303 00:22:27 GetSingleValue result=40 Value=cccccccc 00:22:27 SkyScan query 00:22:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:22:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:28 Parameters OK 00:22:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:28 Set A/D data flow result=40 00:22:28 Set A/D channel type result=40 00:22:28 Set A/D encoding result=40 00:22:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:28 Set channel filter=0.000000e+000 result=40 00:22:28 Config A/D Result=40 00:22:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:28 Get A/D filter: -9.255963e+061 result=40 00:22:28 Get A/D value=-858993460 result=40 00:22:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:28 Parameters OK 00:22:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:28 Set A/D data flow result=40 00:22:28 Set A/D channel type result=40 00:22:28 Set A/D encoding result=40 00:22:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:28 Set channel filter=0.000000e+000 result=40 00:22:28 Config A/D Result=40 00:22:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:28 Get A/D filter: -9.255963e+061 result=40 00:22:28 Get A/D value=-858993460 result=40 00:22:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:22:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:22:28 Aux= 00:22:28 Message to Camera, serial 203303 queued 00:23:05 Received message from Master: op=PointingHead serial=203316 00:23:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:23:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:23:05 Point started: ret=0 00:23:05 point_skyscan result=0 00:23:06 Check angles 00:23:06 SkyScan query 00:23:06 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 00:23:06 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 00:23:07 Check angles 00:23:07 SkyScan query 00:23:07 SkyScan query done: ret=0 az=81.39<-5426 ze=66.51<-7566 Statuses=0009 0008 00:23:07 Msec=750 True Az=81.39 Ze=66.51 Az status=0009 Ze status=0008 00:23:07 Check angles 00:23:07 SkyScan query 00:23:08 SkyScan query done: ret=0 az=98.925<-6595 ze=66.495<-7567 Statuses=0009 0008 00:23:08 Msec=1500 True Az=98.925 Ze=66.495 Az status=0009 Ze status=0008 00:23:08 Check angles 00:23:08 SkyScan query 00:23:09 SkyScan query done: ret=0 az=116.355<-7757 ze=66.495<-7567 Statuses=0009 0008 00:23:09 Msec=2250 True Az=116.355 Ze=66.495 Az status=0009 Ze status=0008 00:23:09 Check angles 00:23:09 SkyScan query 00:23:09 SkyScan query done: ret=0 az=133.86<-8924 ze=66.495<-7567 Statuses=0009 0008 00:23:09 Msec=3000 True Az=133.86 Ze=66.495 Az status=0009 Ze status=0008 00:23:10 Check angles 00:23:10 SkyScan query 00:23:10 SkyScan query done: ret=0 az=151.185<-10079 ze=66.495<-7567 Statuses=0009 0008 00:23:10 Msec=3750 True Az=151.185 Ze=66.495 Az status=0009 Ze status=0008 00:23:10 Check angles 00:23:10 SkyScan query 00:23:11 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 00:23:11 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 00:23:11 Message to Master queued w/err=0: serial=203316 error=0 00:23:16 Received message from Master: op=Filter serial=203317 00:23:16 Color wheel filter change from 0 to 0 00:23:16 FLIGetFilterPos err=0 currentPosition=0 00:23:16 FLIGetStepsRemaining err=0 RemainingSteps=0 00:23:16 Filter is already there-color wheel unchanged 00:23:16 Received message from Master: op=Shutter serial=203318 00:23:16 Shutter LASER close 00:23:16 Received message from Camera: op=State serial=203320 00:23:16 GetSingleValue result=40 Value=cccccccc 00:23:16 SkyScan query 00:23:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:23:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:17 Parameters OK 00:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:17 Set A/D data flow result=40 00:23:17 Set A/D channel type result=40 00:23:17 Set A/D encoding result=40 00:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:17 Set channel filter=0.000000e+000 result=40 00:23:17 Config A/D Result=40 00:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:17 Get A/D filter: -9.255963e+061 result=40 00:23:17 Get A/D value=-858993460 result=40 00:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:17 Parameters OK 00:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:17 Set A/D data flow result=40 00:23:17 Set A/D channel type result=40 00:23:17 Set A/D encoding result=40 00:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:17 Set channel filter=0.000000e+000 result=40 00:23:17 Config A/D Result=40 00:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:17 Get A/D filter: -9.255963e+061 result=40 00:23:17 Get A/D value=-858993460 result=40 00:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:23:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:23:17 Aux= 00:23:17 Message to Camera, serial 203320 queued 00:23:54 Received message from Master: op=PointingHead serial=203333 00:23:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:23:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:23:54 Point started: ret=0 00:23:54 point_skyscan result=0 00:23:55 Check angles 00:23:55 SkyScan query 00:23:55 SkyScan query done: ret=0 az=134.58<-8972 ze=36.36<-9576 Statuses=0009 0009 00:23:55 Msec=0 True Az=134.58 Ze=36.36 Az status=0009 Ze status=0009 00:23:55 Check angles 00:23:55 SkyScan query 00:23:56 SkyScan query done: ret=0 az=116.85<-7790 ze=14.955<-11003 Statuses=0009 0009 00:23:56 Msec=750 True Az=116.85 Ze=14.955 Az status=0009 Ze status=0009 00:23:56 Check angles 00:23:56 SkyScan query 00:23:57 SkyScan query done: ret=0 az=99.42<-6628 ze=-6.015<-12401 Statuses=0009 0009 00:23:57 Msec=1500 True Az=99.42 Ze=-6.015 Az status=0009 Ze status=0009 00:23:57 Check angles 00:23:57 SkyScan query 00:23:57 SkyScan query done: ret=0 az=81.975<-5465 ze=-27.045<-13803 Statuses=0009 0009 00:23:57 Msec=2250 True Az=81.975 Ze=-27.045 Az status=0009 Ze status=0009 00:23:58 Check angles 00:23:58 SkyScan query 00:23:58 SkyScan query done: ret=0 az=64.395<-4293 ze=-38.595<-14573 Statuses=0009 0008 00:23:58 Msec=3000 True Az=64.395 Ze=-38.595 Az status=0009 Ze status=0008 00:23:58 Check angles 00:23:58 SkyScan query 00:23:59 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.52<-14568 Statuses=0009 0008 00:23:59 Msec=3750 True Az=47.07 Ze=-38.52 Az status=0009 Ze status=0008 00:23:59 Check angles 00:23:59 SkyScan query 00:24:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:24:00 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:24:00 Message to Master queued w/err=0: serial=203333 error=0 00:24:05 Received message from Master: op=Filter serial=203334 00:24:05 Color wheel filter change from 0 to 0 00:24:05 FLIGetFilterPos err=0 currentPosition=0 00:24:05 FLIGetStepsRemaining err=0 RemainingSteps=0 00:24:05 Filter is already there-color wheel unchanged 00:24:05 Received message from Master: op=Shutter serial=203335 00:24:05 Shutter LASER close 00:24:05 Received message from Camera: op=State serial=203337 00:24:05 GetSingleValue result=40 Value=cccccccc 00:24:05 SkyScan query 00:24:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:24:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:06 Parameters OK 00:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:06 Set A/D data flow result=40 00:24:06 Set A/D channel type result=40 00:24:06 Set A/D encoding result=40 00:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:06 Set channel filter=0.000000e+000 result=40 00:24:06 Config A/D Result=40 00:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:06 Get A/D filter: -9.255963e+061 result=40 00:24:06 Get A/D value=-858993460 result=40 00:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:06 Parameters OK 00:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:06 Set A/D data flow result=40 00:24:06 Set A/D channel type result=40 00:24:06 Set A/D encoding result=40 00:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:06 Set channel filter=0.000000e+000 result=40 00:24:06 Config A/D Result=40 00:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:06 Get A/D filter: -9.255963e+061 result=40 00:24:06 Get A/D value=-858993460 result=40 00:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:24:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:24:06 Aux= 00:24:06 Message to Camera, serial 203337 queued 00:24:42 Received message from Master: op=PointingHead serial=203350 00:24:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:24:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:24:43 Point started: ret=0 00:24:43 point_skyscan result=0 00:24:43 Check angles 00:24:43 SkyScan query 00:24:44 SkyScan query done: ret=0 az=64.14<-4276 ze=-68.58<-16572 Statuses=0009 0009 00:24:44 Msec=0 True Az=64.14 Ze=-68.58 Az status=0009 Ze status=0009 00:24:44 Check angles 00:24:44 SkyScan query 00:24:45 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.925<-17995 Statuses=0009 0009 00:24:45 Msec=750 True Az=82.08 Ze=-89.925 Az status=0009 Ze status=0009 00:24:45 Check angles 00:24:45 SkyScan query 00:24:46 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.895<-19393 Statuses=0009 0009 00:24:46 Msec=1500 True Az=99.51 Ze=-110.895 Az status=0009 Ze status=0009 00:24:46 Check angles 00:24:46 SkyScan query 00:24:46 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.805<-20787 Statuses=0009 0009 00:24:46 Msec=2250 True Az=116.925 Ze=-131.805 Az status=0009 Ze status=0009 00:24:47 Check angles 00:24:47 SkyScan query 00:24:47 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 00:24:47 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 00:24:47 Check angles 00:24:47 SkyScan query 00:24:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:24:48 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:24:48 Message to Master queued w/err=0: serial=203350 error=0 00:24:53 Received message from Master: op=Filter serial=203351 00:24:53 Color wheel filter change from 0 to 0 00:24:53 FLIGetFilterPos err=0 currentPosition=0 00:24:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:24:53 Filter is already there-color wheel unchanged 00:24:53 Received message from Master: op=Shutter serial=203352 00:24:53 Shutter LASER close 00:24:53 Received message from Camera: op=State serial=203354 00:24:53 GetSingleValue result=40 Value=cccccccc 00:24:53 SkyScan query 00:24:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:24:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:54 Parameters OK 00:24:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:54 Set A/D data flow result=40 00:24:54 Set A/D channel type result=40 00:24:54 Set A/D encoding result=40 00:24:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:54 Set channel filter=0.000000e+000 result=40 00:24:54 Config A/D Result=40 00:24:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:54 Get A/D filter: -9.255963e+061 result=40 00:24:54 Get A/D value=-858993460 result=40 00:24:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:54 Parameters OK 00:24:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:54 Set A/D data flow result=40 00:24:54 Set A/D channel type result=40 00:24:54 Set A/D encoding result=40 00:24:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:54 Set channel filter=0.000000e+000 result=40 00:24:54 Config A/D Result=40 00:24:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:54 Get A/D filter: -9.255963e+061 result=40 00:24:54 Get A/D value=-858993460 result=40 00:24:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:24:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:24:54 Aux= 00:24:54 Message to Camera, serial 203354 queued 00:25:31 Received message from Master: op=PointingHead serial=203367 00:25:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:25:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:25:31 Point started: ret=0 00:25:31 point_skyscan result=0 00:25:32 Check angles 00:25:32 SkyScan query 00:25:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0009 0009 00:25:32 Msec=0 True Az=112.995 Ze=-171.345 Az status=0009 Ze status=0009 00:25:32 Check angles 00:25:32 SkyScan query 00:25:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:25:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:25:33 Message to Master queued w/err=0: serial=203367 error=0 00:25:38 Received message from Master: op=Filter serial=203368 00:25:38 Color wheel filter change from 0 to 0 00:25:38 FLIGetFilterPos err=0 currentPosition=0 00:25:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:25:38 Filter is already there-color wheel unchanged 00:25:38 Received message from Master: op=Shutter serial=203369 00:25:38 Shutter LASER open 00:25:38 Received message from Camera: op=State serial=203371 00:25:38 GetSingleValue result=40 Value=cccccccc 00:25:38 SkyScan query 00:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:25:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:39 Parameters OK 00:25:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:39 Set A/D data flow result=40 00:25:39 Set A/D channel type result=40 00:25:39 Set A/D encoding result=40 00:25:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:39 Set channel filter=0.000000e+000 result=40 00:25:39 Config A/D Result=40 00:25:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:39 Get A/D filter: -9.255963e+061 result=40 00:25:39 Get A/D value=-858993460 result=40 00:25:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:39 Parameters OK 00:25:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:39 Set A/D data flow result=40 00:25:39 Set A/D channel type result=40 00:25:39 Set A/D encoding result=40 00:25:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:39 Set channel filter=0.000000e+000 result=40 00:25:39 Config A/D Result=40 00:25:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:39 Get A/D filter: -9.255963e+061 result=40 00:25:39 Get A/D value=-858993460 result=40 00:25:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:25:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:25:39 Aux= 00:25:39 Message to Camera, serial 203371 queued 00:25:47 Received message from Master: op=Shutter serial=203381 00:25:47 Shutter LASER close 00:25:48 Received message from Master: op=PointingHead serial=203385 00:25:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:25:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:25:48 Point started: ret=0 00:25:48 point_skyscan result=0 00:25:49 Check angles 00:25:49 SkyScan query 00:25:50 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.8<-21520 Statuses=0009 0009 00:25:50 Msec=0 True Az=136.35 Ze=-142.8 Az status=0009 Ze status=0009 00:25:50 Check angles 00:25:50 SkyScan query [UTC 2018-12-17 00:25:50] 00:25:50 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.83<-20122 Statuses=0009 0009 00:25:50 Msec=750 True Az=153.81 Ze=-121.83 Az status=0009 Ze status=0009 00:25:51 Check angles 00:25:51 SkyScan query 00:25:51 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.8<-18720 Statuses=0009 0009 00:25:51 Msec=1500 True Az=171.435 Ze=-100.8 Az status=0009 Ze status=0009 00:25:51 Check angles 00:25:51 SkyScan query 00:25:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.92<-17328 Statuses=0008 0009 00:25:52 Msec=2250 True Az=175.995 Ze=-79.92 Az status=0008 Ze status=0009 00:25:52 Check angles 00:25:52 SkyScan query 00:25:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.92<-15928 Statuses=0008 0009 00:25:53 Msec=3000 True Az=175.995 Ze=-58.92 Az status=0008 Ze status=0009 00:25:53 Check angles 00:25:53 SkyScan query 00:25:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:25:53 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:25:53 Message to Master queued w/err=0: serial=203385 error=0 00:25:58 Received message from Master: op=Filter serial=203386 00:25:58 Color wheel filter change from 0 to 0 00:25:58 FLIGetFilterPos err=0 currentPosition=0 00:25:58 FLIGetStepsRemaining err=0 RemainingSteps=0 00:25:58 Filter is already there-color wheel unchanged 00:25:59 Received message from Master: op=Shutter serial=203387 00:25:59 Shutter LASER close 00:25:59 Received message from Camera: op=State serial=203389 00:25:59 GetSingleValue result=40 Value=cccccccc 00:25:59 SkyScan query 00:25:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:25:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:59 Parameters OK 00:25:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:59 Set A/D data flow result=40 00:25:59 Set A/D channel type result=40 00:25:59 Set A/D encoding result=40 00:25:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:59 Set channel filter=0.000000e+000 result=40 00:25:59 Config A/D Result=40 00:25:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:59 Get A/D filter: -9.255963e+061 result=40 00:25:59 Get A/D value=-858993460 result=40 00:25:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:59 Parameters OK 00:25:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:59 Set A/D data flow result=40 00:25:59 Set A/D channel type result=40 00:25:59 Set A/D encoding result=40 00:25:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:59 Set channel filter=0.000000e+000 result=40 00:25:59 Config A/D Result=40 00:25:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:59 Get A/D filter: -9.255963e+061 result=40 00:25:59 Get A/D value=-858993460 result=40 00:25:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:25:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:25:59 Aux= 00:25:59 Message to Camera, serial 203389 queued 00:26:36 Received message from Master: op=PointingHead serial=203402 00:26:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:26:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:26:37 Point started: ret=0 00:26:37 point_skyscan result=0 00:26:37 Check angles 00:26:37 SkyScan query 00:26:38 SkyScan query done: ret=0 az=152.535<-10169 ze=-21.33<-13422 Statuses=0009 0009 00:26:38 Msec=0 True Az=152.535 Ze=-21.33 Az status=0009 Ze status=0009 00:26:38 Check angles 00:26:38 SkyScan query 00:26:39 SkyScan query done: ret=0 az=135.06<-9004 ze=-0.375<-12025 Statuses=0009 0009 00:26:39 Msec=750 True Az=135.06 Ze=-0.375 Az status=0009 Ze status=0009 00:26:39 Check angles 00:26:39 SkyScan query 00:26:39 SkyScan query done: ret=0 az=117.555<-7837 ze=20.58<-10628 Statuses=0009 0009 00:26:39 Msec=1500 True Az=117.555 Ze=20.58 Az status=0009 Ze status=0009 00:26:40 Check angles 00:26:40 SkyScan query 00:26:40 SkyScan query done: ret=0 az=100.185<-6679 ze=41.52<-9232 Statuses=0009 0009 00:26:40 Msec=2250 True Az=100.185 Ze=41.52 Az status=0009 Ze status=0009 00:26:40 Check angles 00:26:40 SkyScan query 00:26:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 00:26:41 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 00:26:41 Check angles 00:26:41 SkyScan query 00:26:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:26:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:26:42 Message to Master queued w/err=0: serial=203402 error=0 00:26:47 Received message from Master: op=Filter serial=203403 00:26:47 Color wheel filter change from 0 to 0 00:26:47 FLIGetFilterPos err=0 currentPosition=0 00:26:47 FLIGetStepsRemaining err=0 RemainingSteps=0 00:26:47 Filter is already there-color wheel unchanged 00:26:47 Received message from Master: op=Shutter serial=203404 00:26:47 Shutter LASER close 00:26:47 Received message from Camera: op=State serial=203406 00:26:47 GetSingleValue result=40 Value=cccccccc 00:26:47 SkyScan query 00:26:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:26:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:47 Parameters OK 00:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:47 Set A/D data flow result=40 00:26:47 Set A/D channel type result=40 00:26:47 Set A/D encoding result=40 00:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:47 Set channel filter=0.000000e+000 result=40 00:26:47 Config A/D Result=40 00:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:47 Get A/D filter: -9.255963e+061 result=40 00:26:47 Get A/D value=-858993460 result=40 00:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:47 Parameters OK 00:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:47 Set A/D data flow result=40 00:26:47 Set A/D channel type result=40 00:26:47 Set A/D encoding result=40 00:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:47 Set channel filter=0.000000e+000 result=40 00:26:47 Config A/D Result=40 00:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:47 Get A/D filter: -9.255963e+061 result=40 00:26:47 Get A/D value=-858993460 result=40 00:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:26:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:26:47 Aux= 00:26:47 Message to Camera, serial 203406 queued 00:27:24 Received message from Master: op=PointingHead serial=203419 00:27:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:27:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:27:25 Point started: ret=0 00:27:25 point_skyscan result=0 00:27:25 Check angles 00:27:25 SkyScan query 00:27:26 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 00:27:26 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 00:27:26 Check angles 00:27:26 SkyScan query 00:27:27 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 00:27:27 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 00:27:27 Check angles 00:27:27 SkyScan query 00:27:27 SkyScan query done: ret=0 az=144.555<-9637 ze=38.505<-9433 Statuses=0009 0008 00:27:27 Msec=1500 True Az=144.555 Ze=38.505 Az status=0009 Ze status=0008 00:27:28 Check angles 00:27:28 SkyScan query 00:27:28 SkyScan query done: ret=0 az=162.045<-10803 ze=38.505<-9433 Statuses=0009 0008 00:27:28 Msec=2250 True Az=162.045 Ze=38.505 Az status=0009 Ze status=0008 00:27:28 Check angles 00:27:28 SkyScan query 00:27:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 00:27:29 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 00:27:29 Check angles 00:27:29 SkyScan query 00:27:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:27:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:27:30 Message to Master queued w/err=0: serial=203419 error=0 00:27:35 Received message from Master: op=Filter serial=203420 00:27:35 Color wheel filter change from 0 to 0 00:27:35 FLIGetFilterPos err=0 currentPosition=0 00:27:35 FLIGetStepsRemaining err=0 RemainingSteps=0 00:27:35 Filter is already there-color wheel unchanged 00:27:35 Received message from Master: op=Shutter serial=203421 00:27:35 Shutter LASER close 00:27:35 Received message from Camera: op=State serial=203423 00:27:35 GetSingleValue result=40 Value=cccccccc 00:27:35 SkyScan query 00:27:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:27:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:36 Parameters OK 00:27:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:36 Set A/D data flow result=40 00:27:36 Set A/D channel type result=40 00:27:36 Set A/D encoding result=40 00:27:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:36 Set channel filter=0.000000e+000 result=40 00:27:36 Config A/D Result=40 00:27:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:36 Get A/D filter: -9.255963e+061 result=40 00:27:36 Get A/D value=-858993460 result=40 00:27:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:36 Parameters OK 00:27:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:36 Set A/D data flow result=40 00:27:36 Set A/D channel type result=40 00:27:36 Set A/D encoding result=40 00:27:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:36 Set channel filter=0.000000e+000 result=40 00:27:36 Config A/D Result=40 00:27:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:36 Get A/D filter: -9.255963e+061 result=40 00:27:36 Get A/D value=-858993460 result=40 00:27:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:27:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:27:36 Aux= 00:27:36 Message to Camera, serial 203423 queued 00:28:12 Received message from Master: op=PointingHead serial=203436 00:28:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:28:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:28:13 Point started: ret=0 00:28:13 point_skyscan result=0 00:28:13 Check angles 00:28:13 SkyScan query 00:28:14 SkyScan query done: ret=0 az=152.655<-10177 ze=8.16<-11456 Statuses=0009 0009 00:28:14 Msec=0 True Az=152.655 Ze=8.16 Az status=0009 Ze status=0009 00:28:14 Check angles 00:28:14 SkyScan query 00:28:15 SkyScan query done: ret=0 az=134.58<-8972 ze=-13.17<-12878 Statuses=0009 0009 00:28:15 Msec=750 True Az=134.58 Ze=-13.17 Az status=0009 Ze status=0009 00:28:15 Check angles 00:28:15 SkyScan query 00:28:16 SkyScan query done: ret=0 az=117.285<-7819 ze=-34.185<-14279 Statuses=0009 0009 00:28:16 Msec=1500 True Az=117.285 Ze=-34.185 Az status=0009 Ze status=0009 00:28:16 Check angles 00:28:16 SkyScan query 00:28:16 SkyScan query done: ret=0 az=99.855<-6657 ze=-51.585<-15439 Statuses=0009 0009 00:28:16 Msec=2250 True Az=99.855 Ze=-51.585 Az status=0009 Ze status=0009 00:28:17 Check angles 00:28:17 SkyScan query 00:28:17 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 00:28:17 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 00:28:17 Check angles 00:28:17 SkyScan query 00:28:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:28:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:28:18 Message to Master queued w/err=0: serial=203436 error=0 00:28:23 Received message from Master: op=Filter serial=203437 00:28:23 Color wheel filter change from 0 to 0 00:28:23 FLIGetFilterPos err=0 currentPosition=0 00:28:23 FLIGetStepsRemaining err=0 RemainingSteps=0 00:28:23 Filter is already there-color wheel unchanged 00:28:23 Received message from Master: op=Shutter serial=203438 00:28:23 Shutter LASER close 00:28:23 Received message from Camera: op=State serial=203440 00:28:23 GetSingleValue result=40 Value=cccccccc 00:28:23 SkyScan query 00:28:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:28:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:24 Parameters OK 00:28:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:24 Set A/D data flow result=40 00:28:24 Set A/D channel type result=40 00:28:24 Set A/D encoding result=40 00:28:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:24 Set channel filter=0.000000e+000 result=40 00:28:24 Config A/D Result=40 00:28:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:24 Get A/D filter: -9.255963e+061 result=40 00:28:24 Get A/D value=-858993460 result=40 00:28:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:24 Parameters OK 00:28:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:24 Set A/D data flow result=40 00:28:24 Set A/D channel type result=40 00:28:24 Set A/D encoding result=40 00:28:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:24 Set channel filter=0.000000e+000 result=40 00:28:24 Config A/D Result=40 00:28:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:24 Get A/D filter: -9.255963e+061 result=40 00:28:24 Get A/D value=-858993460 result=40 00:28:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:28:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:28:24 Aux= 00:28:24 Message to Camera, serial 203440 queued 00:29:00 Received message from Master: op=PointingHead serial=203453 00:29:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:29:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:29:01 Point started: ret=0 00:29:01 point_skyscan result=0 00:29:02 Check angles 00:29:02 SkyScan query 00:29:02 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.6<-17440 Statuses=0009 0009 00:29:02 Msec=0 True Az=109.335 Ze=-81.6 Az status=0009 Ze status=0009 00:29:02 Check angles 00:29:02 SkyScan query 00:29:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.945<-18863 Statuses=0008 0009 00:29:03 Msec=750 True Az=112.995 Ze=-102.945 Az status=0008 Ze status=0009 00:29:03 Check angles 00:29:03 SkyScan query 00:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 00:29:04 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 00:29:04 Check angles 00:29:04 SkyScan query 00:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 00:29:04 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 00:29:05 Check angles 00:29:05 SkyScan query 00:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.2<-23080 Statuses=0008 0009 00:29:05 Msec=3000 True Az=112.995 Ze=-166.2 Az status=0008 Ze status=0009 00:29:05 Check angles 00:29:05 SkyScan query 00:29:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:29:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:29:06 Message to Master queued w/err=0: serial=203453 error=0 00:29:11 Received message from Master: op=Filter serial=203454 00:29:11 Color wheel filter change from 0 to 0 00:29:11 FLIGetFilterPos err=0 currentPosition=0 00:29:11 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:11 Filter is already there-color wheel unchanged 00:29:11 Received message from Master: op=Shutter serial=203455 00:29:11 Shutter LASER open 00:29:11 Received message from Camera: op=State serial=203457 00:29:11 GetSingleValue result=40 Value=cccccccc 00:29:11 SkyScan query 00:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:29:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:12 Parameters OK 00:29:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:12 Set A/D data flow result=40 00:29:12 Set A/D channel type result=40 00:29:12 Set A/D encoding result=40 00:29:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:12 Set channel filter=0.000000e+000 result=40 00:29:12 Config A/D Result=40 00:29:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:12 Get A/D filter: -9.255963e+061 result=40 00:29:12 Get A/D value=-858993460 result=40 00:29:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:12 Parameters OK 00:29:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:12 Set A/D data flow result=40 00:29:12 Set A/D channel type result=40 00:29:12 Set A/D encoding result=40 00:29:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:12 Set channel filter=0.000000e+000 result=40 00:29:12 Config A/D Result=40 00:29:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:12 Get A/D filter: -9.255963e+061 result=40 00:29:12 Get A/D value=-858993460 result=40 00:29:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:12 Aux= 00:29:12 Message to Camera, serial 203457 queued 00:29:20 Received message from Master: op=Shutter serial=203467 00:29:20 Shutter LASER close 00:29:21 Received message from Master: op=PointingHead serial=203471 00:29:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:29:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:29:21 Point started: ret=0 00:29:21 point_skyscan result=0 00:29:22 Check angles 00:29:22 SkyScan query 00:29:22 SkyScan query done: ret=0 az=89.55<-5970 ze=156.84<-1544 Statuses=0009 0009 00:29:22 Msec=0 True Az=89.55 Ze=156.84 Az status=0009 Ze status=0009 00:29:23 Check angles 00:29:23 SkyScan query 00:29:23 SkyScan query done: ret=0 az=72.015<-4801 ze=135.885<-2941 Statuses=0009 0009 00:29:23 Msec=750 True Az=72.015 Ze=135.885 Az status=0009 Ze status=0009 00:29:23 Check angles 00:29:23 SkyScan query 00:29:24 SkyScan query done: ret=0 az=54.69<-3646 ze=114.915<-4339 Statuses=0009 0009 00:29:24 Msec=1500 True Az=54.69 Ze=114.915 Az status=0009 Ze status=0009 00:29:24 Check angles 00:29:24 SkyScan query 00:29:25 SkyScan query done: ret=0 az=41.025<-2735 ze=93.975<-5735 Statuses=0009 0009 00:29:25 Msec=2250 True Az=41.025 Ze=93.975 Az status=0009 Ze status=0009 00:29:25 Check angles 00:29:25 SkyScan query 00:29:25 SkyScan query done: ret=0 az=40.98<-2732 ze=72.96<-7136 Statuses=0008 0009 00:29:25 Msec=3000 True Az=40.98 Ze=72.96 Az status=0008 Ze status=0009 00:29:26 Check angles 00:29:26 SkyScan query 00:29:26 SkyScan query done: ret=0 az=40.98<-2732 ze=52.575<-8495 Statuses=0008 0009 00:29:26 Msec=3750 True Az=40.98 Ze=52.575 Az status=0008 Ze status=0009 00:29:26 Check angles 00:29:26 SkyScan query 00:29:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:29:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:29:27 Message to Master queued w/err=0: serial=203471 error=0 00:29:32 Received message from Master: op=Filter serial=203472 00:29:32 Color wheel filter change from 0 to 0 00:29:32 FLIGetFilterPos err=0 currentPosition=0 00:29:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:32 Filter is already there-color wheel unchanged 00:29:32 Received message from Master: op=Shutter serial=203473 00:29:32 Shutter LASER close 00:29:32 Received message from Camera: op=State serial=203475 00:29:32 GetSingleValue result=40 Value=cccccccc 00:29:32 SkyScan query 00:29:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:29:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:33 Parameters OK 00:29:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:33 Set A/D data flow result=40 00:29:33 Set A/D channel type result=40 00:29:33 Set A/D encoding result=40 00:29:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:33 Set channel filter=0.000000e+000 result=40 00:29:33 Config A/D Result=40 00:29:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:33 Get A/D filter: -9.255963e+061 result=40 00:29:33 Get A/D value=-858993460 result=40 00:29:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:33 Parameters OK 00:29:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:33 Set A/D data flow result=40 00:29:33 Set A/D channel type result=40 00:29:33 Set A/D encoding result=40 00:29:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:33 Set channel filter=0.000000e+000 result=40 00:29:33 Config A/D Result=40 00:29:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:33 Get A/D filter: -9.255963e+061 result=40 00:29:33 Get A/D value=-858993460 result=40 00:29:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:33 Aux= 00:29:33 Message to Camera, serial 203475 queued 00:30:09 Received message from Master: op=PointingHead serial=203487 00:30:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:30:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:30:09 Point started: ret=0 00:30:09 point_skyscan result=0 00:30:10 Check angles 00:30:10 SkyScan query 00:30:10 SkyScan query done: ret=0 az=63.78<-4252 ze=66.525<-7565 Statuses=0009 0008 00:30:10 Msec=0 True Az=63.78 Ze=66.525 Az status=0009 Ze status=0008 00:30:11 Check angles 00:30:11 SkyScan query 00:30:11 SkyScan query done: ret=0 az=81.36<-5424 ze=66.51<-7566 Statuses=0009 0008 00:30:11 Msec=750 True Az=81.36 Ze=66.51 Az status=0009 Ze status=0008 00:30:11 Check angles 00:30:11 SkyScan query 00:30:12 SkyScan query done: ret=0 az=99.09<-6606 ze=66.495<-7567 Statuses=0009 0008 00:30:12 Msec=1500 True Az=99.09 Ze=66.495 Az status=0009 Ze status=0008 00:30:12 Check angles 00:30:12 SkyScan query 00:30:13 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 00:30:13 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 00:30:13 Check angles 00:30:13 SkyScan query 00:30:13 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 00:30:13 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 00:30:14 Check angles 00:30:14 SkyScan query 00:30:14 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 00:30:14 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 00:30:14 Check angles 00:30:14 SkyScan query 00:30:15 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:30:15 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:30:15 Message to Master queued w/err=0: serial=203487 error=0 00:30:20 Received message from Master: op=Filter serial=203488 00:30:20 Color wheel filter change from 0 to 0 00:30:20 FLIGetFilterPos err=0 currentPosition=0 00:30:20 FLIGetStepsRemaining err=0 RemainingSteps=0 00:30:20 Filter is already there-color wheel unchanged 00:30:20 Received message from Master: op=Shutter serial=203489 00:30:20 Shutter LASER close 00:30:20 Received message from Camera: op=State serial=203491 00:30:20 GetSingleValue result=40 Value=cccccccc 00:30:20 SkyScan query 00:30:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:30:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:21 Parameters OK 00:30:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:21 Set A/D data flow result=40 00:30:21 Set A/D channel type result=40 00:30:21 Set A/D encoding result=40 00:30:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:21 Set channel filter=0.000000e+000 result=40 00:30:21 Config A/D Result=40 00:30:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:21 Get A/D filter: -9.255963e+061 result=40 00:30:21 Get A/D value=-858993460 result=40 00:30:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:21 Parameters OK 00:30:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:21 Set A/D data flow result=40 00:30:21 Set A/D channel type result=40 00:30:21 Set A/D encoding result=40 00:30:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:21 Set channel filter=0.000000e+000 result=40 00:30:21 Config A/D Result=40 00:30:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:21 Get A/D filter: -9.255963e+061 result=40 00:30:21 Get A/D value=-858993460 result=40 00:30:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:30:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:30:21 Aux= 00:30:21 Message to Camera, serial 203491 queued 00:30:58 Received message from Master: op=PointingHead serial=203504 00:30:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:30:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:30:58 Point started: ret=0 00:30:58 point_skyscan result=0 00:30:59 Check angles 00:30:59 SkyScan query 00:30:59 SkyScan query done: ret=0 az=134.73<-8982 ze=36.48<-9568 Statuses=0009 0009 00:30:59 Msec=0 True Az=134.73 Ze=36.48 Az status=0009 Ze status=0009 00:30:59 Check angles 00:30:59 SkyScan query 00:31:00 SkyScan query done: ret=0 az=116.88<-7792 ze=15.06<-10996 Statuses=0009 0009 00:31:00 Msec=750 True Az=116.88 Ze=15.06 Az status=0009 Ze status=0009 00:31:00 Check angles 00:31:00 SkyScan query 00:31:01 SkyScan query done: ret=0 az=99.495<-6633 ze=-5.94<-12396 Statuses=0009 0009 00:31:01 Msec=1500 True Az=99.495 Ze=-5.94 Az status=0009 Ze status=0009 00:31:01 Check angles 00:31:01 SkyScan query 00:31:02 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.91<-13794 Statuses=0009 0009 00:31:02 Msec=2250 True Az=82.035 Ze=-26.91 Az status=0009 Ze status=0009 00:31:02 Check angles 00:31:02 SkyScan query 00:31:02 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.58<-14572 Statuses=0009 0008 00:31:02 Msec=3000 True Az=64.44 Ze=-38.58 Az status=0009 Ze status=0008 00:31:02 Check angles 00:31:02 SkyScan query 00:31:03 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.52<-14568 Statuses=0009 0008 00:31:03 Msec=3750 True Az=47.16 Ze=-38.52 Az status=0009 Ze status=0008 00:31:03 Check angles 00:31:03 SkyScan query 00:31:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:31:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:31:04 Message to Master queued w/err=0: serial=203504 error=0 00:31:09 Received message from Master: op=Filter serial=203505 00:31:09 Color wheel filter change from 0 to 0 00:31:09 FLIGetFilterPos err=0 currentPosition=0 00:31:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:31:09 Filter is already there-color wheel unchanged 00:31:09 Received message from Master: op=Shutter serial=203506 00:31:09 Shutter LASER close 00:31:09 Received message from Camera: op=State serial=203508 00:31:09 GetSingleValue result=40 Value=cccccccc 00:31:09 SkyScan query 00:31:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:31:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:10 Parameters OK 00:31:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:10 Set A/D data flow result=40 00:31:10 Set A/D channel type result=40 00:31:10 Set A/D encoding result=40 00:31:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:10 Set channel filter=0.000000e+000 result=40 00:31:10 Config A/D Result=40 00:31:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:10 Get A/D filter: -9.255963e+061 result=40 00:31:10 Get A/D value=-858993460 result=40 00:31:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:10 Parameters OK 00:31:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:10 Set A/D data flow result=40 00:31:10 Set A/D channel type result=40 00:31:10 Set A/D encoding result=40 00:31:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:10 Set channel filter=0.000000e+000 result=40 00:31:10 Config A/D Result=40 00:31:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:10 Get A/D filter: -9.255963e+061 result=40 00:31:10 Get A/D value=-858993460 result=40 00:31:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:31:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:31:10 Aux= 00:31:10 Message to Camera, serial 203508 queued 00:31:46 Received message from Master: op=PointingHead serial=203521 00:31:46 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:31:46 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:31:47 Point started: ret=0 00:31:47 point_skyscan result=0 00:31:48 Check angles 00:31:48 SkyScan query 00:31:48 SkyScan query done: ret=0 az=64.125<-4275 ze=-68.445<-16563 Statuses=0009 0009 00:31:48 Msec=0 True Az=64.125 Ze=-68.445 Az status=0009 Ze status=0009 00:31:48 Check angles 00:31:48 SkyScan query 00:31:49 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.43<-17962 Statuses=0009 0009 00:31:49 Msec=750 True Az=81.54 Ze=-89.43 Az status=0009 Ze status=0009 00:31:49 Check angles 00:31:49 SkyScan query 00:31:50 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.325<-19355 Statuses=0009 0009 00:31:50 Msec=1500 True Az=98.985 Ze=-110.325 Az status=0009 Ze status=0009 00:31:50 Check angles 00:31:50 SkyScan query 00:31:50 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.265<-20751 Statuses=0009 0009 00:31:50 Msec=2250 True Az=116.445 Ze=-131.265 Az status=0009 Ze status=0009 00:31:51 Check angles 00:31:51 SkyScan query 00:31:51 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.57<-21438 Statuses=0009 0008 00:31:51 Msec=3000 True Az=131.025 Ze=-141.57 Az status=0009 Ze status=0008 00:31:51 Check angles 00:31:51 SkyScan query 00:31:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:31:52 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:31:52 Message to Master queued w/err=0: serial=203521 error=0 00:31:57 Received message from Master: op=Filter serial=203522 00:31:57 Color wheel filter change from 0 to 0 00:31:57 FLIGetFilterPos err=0 currentPosition=0 00:31:57 FLIGetStepsRemaining err=0 RemainingSteps=0 00:31:57 Filter is already there-color wheel unchanged 00:31:57 Received message from Master: op=Shutter serial=203523 00:31:57 Shutter LASER close 00:31:57 Received message from Camera: op=State serial=203525 00:31:57 GetSingleValue result=40 Value=cccccccc 00:31:57 SkyScan query 00:31:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:31:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:58 Parameters OK 00:31:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:58 Set A/D data flow result=40 00:31:58 Set A/D channel type result=40 00:31:58 Set A/D encoding result=40 00:31:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:58 Set channel filter=0.000000e+000 result=40 00:31:58 Config A/D Result=40 00:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:58 Get A/D filter: -9.255963e+061 result=40 00:31:58 Get A/D value=-858993460 result=40 00:31:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:58 Parameters OK 00:31:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:58 Set A/D data flow result=40 00:31:58 Set A/D channel type result=40 00:31:58 Set A/D encoding result=40 00:31:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:58 Set channel filter=0.000000e+000 result=40 00:31:58 Config A/D Result=40 00:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:58 Get A/D filter: -9.255963e+061 result=40 00:31:58 Get A/D value=-858993460 result=40 00:31:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:31:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:31:58 Aux= 00:31:58 Message to Camera, serial 203525 queued 00:32:35 Received message from Master: op=PointingHead serial=203538 00:32:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:32:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:32:35 Point started: ret=0 00:32:35 point_skyscan result=0 00:32:36 Check angles 00:32:36 SkyScan query 00:32:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 00:32:36 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 00:32:36 Check angles 00:32:36 SkyScan query 00:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:32:37 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:32:37 Message to Master queued w/err=0: serial=203538 error=0 00:32:42 Received message from Master: op=Filter serial=203539 00:32:42 Color wheel filter change from 0 to 0 00:32:42 FLIGetFilterPos err=0 currentPosition=0 00:32:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:32:42 Filter is already there-color wheel unchanged 00:32:42 Received message from Master: op=Shutter serial=203540 00:32:42 Shutter LASER open 00:32:42 Received message from Camera: op=State serial=203542 00:32:42 GetSingleValue result=40 Value=cccccccc 00:32:42 SkyScan query 00:32:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:32:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:43 Parameters OK 00:32:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:43 Set A/D data flow result=40 00:32:43 Set A/D channel type result=40 00:32:43 Set A/D encoding result=40 00:32:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:43 Set channel filter=0.000000e+000 result=40 00:32:43 Config A/D Result=40 00:32:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:43 Get A/D filter: -9.255963e+061 result=40 00:32:43 Get A/D value=-858993460 result=40 00:32:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:43 Parameters OK 00:32:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:43 Set A/D data flow result=40 00:32:43 Set A/D channel type result=40 00:32:43 Set A/D encoding result=40 00:32:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:43 Set channel filter=0.000000e+000 result=40 00:32:43 Config A/D Result=40 00:32:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:43 Get A/D filter: -9.255963e+061 result=40 00:32:43 Get A/D value=-858993460 result=40 00:32:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:32:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:32:43 Aux= 00:32:43 Message to Camera, serial 203542 queued 00:32:51 Received message from Master: op=Shutter serial=203552 00:32:51 Shutter LASER close 00:32:52 Received message from Master: op=PointingHead serial=203556 00:32:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:32:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:32:52 Point started: ret=0 00:32:52 point_skyscan result=0 00:32:53 Check angles 00:32:53 SkyScan query 00:32:54 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.4<-21560 Statuses=0009 0009 00:32:54 Msec=0 True Az=135.855 Ze=-143.4 Az status=0009 Ze status=0009 00:32:54 Check angles 00:32:54 SkyScan query 00:32:54 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.385<-20159 Statuses=0009 0009 00:32:54 Msec=750 True Az=153.345 Ze=-122.385 Az status=0009 Ze status=0009 00:32:54 Check angles 00:32:54 SkyScan query 00:32:55 SkyScan query done: ret=0 az=170.865<-11391 ze=-101.49<-18766 Statuses=0009 0009 00:32:55 Msec=1500 True Az=170.865 Ze=-101.49 Az status=0009 Ze status=0009 00:32:55 Check angles 00:32:55 SkyScan query 00:32:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.505<-17367 Statuses=0008 0009 00:32:56 Msec=2250 True Az=175.995 Ze=-80.505 Az status=0008 Ze status=0009 00:32:56 Check angles 00:32:56 SkyScan query 00:32:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.535<-15969 Statuses=0008 0009 00:32:57 Msec=3000 True Az=175.995 Ze=-59.535 Az status=0008 Ze status=0009 00:32:57 Check angles 00:32:57 SkyScan query 00:32:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:32:57 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:32:57 Message to Master queued w/err=0: serial=203556 error=0 00:33:02 Received message from Master: op=Filter serial=203557 00:33:02 Color wheel filter change from 0 to 0 00:33:02 FLIGetFilterPos err=0 currentPosition=0 00:33:02 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:02 Filter is already there-color wheel unchanged 00:33:02 Received message from Master: op=Shutter serial=203558 00:33:02 Shutter LASER close 00:33:03 Received message from Camera: op=State serial=203560 00:33:03 GetSingleValue result=40 Value=cccccccc 00:33:03 SkyScan query 00:33:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:33:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:03 Parameters OK 00:33:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:03 Set A/D data flow result=40 00:33:03 Set A/D channel type result=40 00:33:03 Set A/D encoding result=40 00:33:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:03 Set channel filter=0.000000e+000 result=40 00:33:03 Config A/D Result=40 00:33:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:03 Get A/D filter: -9.255963e+061 result=40 00:33:03 Get A/D value=-858993460 result=40 00:33:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:03 Parameters OK 00:33:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:03 Set A/D data flow result=40 00:33:03 Set A/D channel type result=40 00:33:03 Set A/D encoding result=40 00:33:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:03 Set channel filter=0.000000e+000 result=40 00:33:03 Config A/D Result=40 00:33:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:03 Get A/D filter: -9.255963e+061 result=40 00:33:03 Get A/D value=-858993460 result=40 00:33:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:03 Aux= 00:33:03 Message to Camera, serial 203560 queued 00:33:40 Received message from Master: op=PointingHead serial=203573 00:33:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:33:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:33:40 Point started: ret=0 00:33:40 point_skyscan result=0 00:33:41 Check angles 00:33:41 SkyScan query 00:33:42 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.885<-13459 Statuses=0009 0009 00:33:42 Msec=0 True Az=153.09 Ze=-21.885 Az status=0009 Ze status=0009 00:33:42 Check angles 00:33:42 SkyScan query 00:33:42 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.885<-12059 Statuses=0009 0009 00:33:42 Msec=750 True Az=135.63 Ze=-0.885 Az status=0009 Ze status=0009 00:33:43 Check angles 00:33:43 SkyScan query 00:33:43 SkyScan query done: ret=0 az=117.705<-7847 ze=20.505<-10633 Statuses=0009 0009 00:33:43 Msec=1500 True Az=117.705 Ze=20.505 Az status=0009 Ze status=0009 00:33:43 Check angles 00:33:43 SkyScan query 00:33:44 SkyScan query done: ret=0 az=100.365<-6691 ze=41.475<-9235 Statuses=0009 0009 00:33:44 Msec=2250 True Az=100.365 Ze=41.475 Az status=0009 Ze status=0009 00:33:44 Check angles 00:33:44 SkyScan query 00:33:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 00:33:45 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 00:33:45 Check angles 00:33:45 SkyScan query 00:33:46 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 00:33:46 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 00:33:46 Message to Master queued w/err=0: serial=203573 error=0 00:33:51 Received message from Master: op=Filter serial=203574 00:33:51 Color wheel filter change from 0 to 0 00:33:51 FLIGetFilterPos err=0 currentPosition=0 00:33:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:51 Filter is already there-color wheel unchanged 00:33:51 Received message from Master: op=Shutter serial=203575 00:33:51 Shutter LASER close 00:33:51 Received message from Camera: op=State serial=203577 00:33:51 GetSingleValue result=40 Value=cccccccc 00:33:51 SkyScan query 00:33:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:33:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:51 Parameters OK 00:33:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:51 Set A/D data flow result=40 00:33:51 Set A/D channel type result=40 00:33:51 Set A/D encoding result=40 00:33:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:51 Set channel filter=0.000000e+000 result=40 00:33:51 Config A/D Result=40 00:33:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:51 Get A/D filter: -9.255963e+061 result=40 00:33:51 Get A/D value=-858993460 result=40 00:33:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:51 Parameters OK 00:33:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:51 Set A/D data flow result=40 00:33:51 Set A/D channel type result=40 00:33:51 Set A/D encoding result=40 00:33:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:51 Set channel filter=0.000000e+000 result=40 00:33:51 Config A/D Result=40 00:33:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:51 Get A/D filter: -9.255963e+061 result=40 00:33:51 Get A/D value=-858993460 result=40 00:33:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:51 Aux= 00:33:51 Message to Camera, serial 203577 queued 00:34:28 Received message from Master: op=PointingHead serial=203590 00:34:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:34:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:34:28 Point started: ret=0 00:34:28 point_skyscan result=0 00:34:29 Check angles 00:34:29 SkyScan query 00:34:30 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 00:34:30 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 00:34:30 Check angles 00:34:30 SkyScan query 00:34:31 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 00:34:31 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 00:34:31 Check angles 00:34:31 SkyScan query 00:34:31 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 00:34:31 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 00:34:31 Check angles 00:34:31 SkyScan query 00:34:32 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 00:34:32 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 00:34:32 Check angles 00:34:32 SkyScan query 00:34:33 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:34:33 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:34:33 Check angles 00:34:33 SkyScan query 00:34:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:34:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:34:34 Message to Master queued w/err=0: serial=203590 error=0 00:34:39 Received message from Master: op=Filter serial=203591 00:34:39 Color wheel filter change from 0 to 0 00:34:39 FLIGetFilterPos err=0 currentPosition=0 00:34:39 FLIGetStepsRemaining err=0 RemainingSteps=0 00:34:39 Filter is already there-color wheel unchanged 00:34:39 Received message from Master: op=Shutter serial=203592 00:34:39 Shutter LASER close 00:34:39 Received message from Camera: op=State serial=203594 00:34:39 GetSingleValue result=40 Value=cccccccc 00:34:39 SkyScan query 00:34:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:34:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:39 Parameters OK 00:34:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:39 Set A/D data flow result=40 00:34:39 Set A/D channel type result=40 00:34:39 Set A/D encoding result=40 00:34:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:39 Set channel filter=0.000000e+000 result=40 00:34:39 Config A/D Result=40 00:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:39 Get A/D filter: -9.255963e+061 result=40 00:34:39 Get A/D value=-858993460 result=40 00:34:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:39 Parameters OK 00:34:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:39 Set A/D data flow result=40 00:34:39 Set A/D channel type result=40 00:34:39 Set A/D encoding result=40 00:34:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:39 Set channel filter=0.000000e+000 result=40 00:34:39 Config A/D Result=40 00:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:39 Get A/D filter: -9.255963e+061 result=40 00:34:39 Get A/D value=-858993460 result=40 00:34:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:34:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:34:39 Aux= 00:34:39 Message to Camera, serial 203594 queued 00:35:16 Received message from Master: op=PointingHead serial=203607 00:35:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:35:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:35:17 Point started: ret=0 00:35:17 point_skyscan result=0 00:35:17 Check angles 00:35:17 SkyScan query 00:35:18 SkyScan query done: ret=0 az=152.595<-10173 ze=8.145<-11457 Statuses=0009 0009 00:35:18 Msec=0 True Az=152.595 Ze=8.145 Az status=0009 Ze status=0009 00:35:18 Check angles 00:35:18 SkyScan query 00:35:19 SkyScan query done: ret=0 az=134.61<-8974 ze=-13.2<-12880 Statuses=0009 0009 00:35:19 Msec=750 True Az=134.61 Ze=-13.2 Az status=0009 Ze status=0009 00:35:19 Check angles 00:35:19 SkyScan query 00:35:19 SkyScan query done: ret=0 az=117.12<-7808 ze=-34.2<-14280 Statuses=0009 0009 00:35:19 Msec=1500 True Az=117.12 Ze=-34.2 Az status=0009 Ze status=0009 00:35:20 Check angles 00:35:20 SkyScan query 00:35:20 SkyScan query done: ret=0 az=99.87<-6658 ze=-51.585<-15439 Statuses=0009 0009 00:35:20 Msec=2250 True Az=99.87 Ze=-51.585 Az status=0009 Ze status=0009 00:35:20 Check angles 00:35:20 SkyScan query 00:35:21 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 00:35:21 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 00:35:21 Check angles 00:35:21 SkyScan query 00:35:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:35:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:35:22 Message to Master queued w/err=0: serial=203607 error=0 00:35:27 Received message from Master: op=Filter serial=203608 00:35:27 Color wheel filter change from 0 to 0 00:35:27 FLIGetFilterPos err=0 currentPosition=0 00:35:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:35:27 Filter is already there-color wheel unchanged 00:35:27 Received message from Master: op=Shutter serial=203609 00:35:27 Shutter LASER close 00:35:27 Received message from Camera: op=State serial=203611 00:35:27 GetSingleValue result=40 Value=cccccccc 00:35:27 SkyScan query 00:35:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:35:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:28 Parameters OK 00:35:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:28 Set A/D data flow result=40 00:35:28 Set A/D channel type result=40 00:35:28 Set A/D encoding result=40 00:35:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:28 Set channel filter=0.000000e+000 result=40 00:35:28 Config A/D Result=40 00:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:28 Get A/D filter: -9.255963e+061 result=40 00:35:28 Get A/D value=-858993460 result=40 00:35:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:28 Parameters OK 00:35:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:28 Set A/D data flow result=40 00:35:28 Set A/D channel type result=40 00:35:28 Set A/D encoding result=40 00:35:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:28 Set channel filter=0.000000e+000 result=40 00:35:28 Config A/D Result=40 00:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:28 Get A/D filter: -9.255963e+061 result=40 00:35:28 Get A/D value=-858993460 result=40 00:35:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:35:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:35:28 Aux= 00:35:28 Message to Camera, serial 203611 queued [UTC 2018-12-17 00:35:52] 00:36:04 Received message from Master: op=PointingHead serial=203624 00:36:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:36:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:36:05 Point started: ret=0 00:36:05 point_skyscan result=0 00:36:05 Check angles 00:36:05 SkyScan query 00:36:06 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.21<-17414 Statuses=0009 0009 00:36:06 Msec=0 True Az=108.93 Ze=-81.21 Az status=0009 Ze status=0009 00:36:06 Check angles 00:36:06 SkyScan query 00:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 00:36:07 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 00:36:07 Check angles 00:36:07 SkyScan query 00:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.12<-20208 Statuses=0008 0009 00:36:08 Msec=1500 True Az=112.995 Ze=-123.12 Az status=0008 Ze status=0009 00:36:08 Check angles 00:36:08 SkyScan query 00:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.105<-21607 Statuses=0008 0009 00:36:08 Msec=2250 True Az=112.995 Ze=-144.105 Az status=0008 Ze status=0009 00:36:08 Check angles 00:36:08 SkyScan query 00:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.48<-23032 Statuses=0008 0009 00:36:09 Msec=3000 True Az=112.995 Ze=-165.48 Az status=0008 Ze status=0009 00:36:09 Check angles 00:36:09 SkyScan query 00:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:36:10 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:36:10 Message to Master queued w/err=0: serial=203624 error=0 00:36:15 Received message from Master: op=Filter serial=203625 00:36:15 Color wheel filter change from 0 to 0 00:36:15 FLIGetFilterPos err=0 currentPosition=0 00:36:15 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:15 Filter is already there-color wheel unchanged 00:36:15 Received message from Master: op=Shutter serial=203626 00:36:15 Shutter LASER open 00:36:15 Received message from Camera: op=State serial=203628 00:36:15 GetSingleValue result=40 Value=cccccccc 00:36:15 SkyScan query 00:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:36:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:16 Parameters OK 00:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:16 Set A/D data flow result=40 00:36:16 Set A/D channel type result=40 00:36:16 Set A/D encoding result=40 00:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:16 Set channel filter=0.000000e+000 result=40 00:36:16 Config A/D Result=40 00:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:16 Get A/D filter: -9.255963e+061 result=40 00:36:16 Get A/D value=-858993460 result=40 00:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:16 Parameters OK 00:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:16 Set A/D data flow result=40 00:36:16 Set A/D channel type result=40 00:36:16 Set A/D encoding result=40 00:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:16 Set channel filter=0.000000e+000 result=40 00:36:16 Config A/D Result=40 00:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:16 Get A/D filter: -9.255963e+061 result=40 00:36:16 Get A/D value=-858993460 result=40 00:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:16 Aux= 00:36:16 Message to Camera, serial 203628 queued 00:36:24 Received message from Master: op=Shutter serial=203638 00:36:24 Shutter LASER close 00:36:25 Received message from Master: op=PointingHead serial=203642 00:36:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:36:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:36:25 Point started: ret=0 00:36:25 point_skyscan result=0 00:36:26 Check angles 00:36:26 SkyScan query 00:36:26 SkyScan query done: ret=0 az=89.64<-5976 ze=156.99<-1534 Statuses=0009 0009 00:36:26 Msec=0 True Az=89.64 Ze=156.99 Az status=0009 Ze status=0009 00:36:26 Check angles 00:36:26 SkyScan query 00:36:27 SkyScan query done: ret=0 az=71.865<-4791 ze=135.6<-2960 Statuses=0009 0009 00:36:27 Msec=750 True Az=71.865 Ze=135.6 Az status=0009 Ze status=0009 00:36:27 Check angles 00:36:27 SkyScan query 00:36:28 SkyScan query done: ret=0 az=54.42<-3628 ze=114.6<-4360 Statuses=0009 0009 00:36:28 Msec=1500 True Az=54.42 Ze=114.6 Az status=0009 Ze status=0009 00:36:28 Check angles 00:36:28 SkyScan query 00:36:29 SkyScan query done: ret=0 az=40.98<-2732 ze=93.69<-5754 Statuses=0009 0009 00:36:29 Msec=2250 True Az=40.98 Ze=93.69 Az status=0009 Ze status=0009 00:36:29 Check angles 00:36:29 SkyScan query 00:36:29 SkyScan query done: ret=0 az=40.98<-2732 ze=72.69<-7154 Statuses=0008 0009 00:36:29 Msec=3000 True Az=40.98 Ze=72.69 Az status=0008 Ze status=0009 00:36:29 Check angles 00:36:29 SkyScan query 00:36:30 SkyScan query done: ret=0 az=40.98<-2732 ze=52.41<-8506 Statuses=0008 0009 00:36:30 Msec=3750 True Az=40.98 Ze=52.41 Az status=0008 Ze status=0009 00:36:30 Check angles 00:36:30 SkyScan query 00:36:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:36:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:36:31 Message to Master queued w/err=0: serial=203642 error=0 00:36:36 Received message from Master: op=Filter serial=203643 00:36:36 Color wheel filter change from 0 to 0 00:36:36 FLIGetFilterPos err=0 currentPosition=0 00:36:36 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:36 Filter is already there-color wheel unchanged 00:36:36 Received message from Master: op=Shutter serial=203644 00:36:36 Shutter LASER close 00:36:36 Received message from Camera: op=State serial=203646 00:36:36 GetSingleValue result=40 Value=cccccccc 00:36:36 SkyScan query 00:36:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:36:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:37 Parameters OK 00:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:37 Set A/D data flow result=40 00:36:37 Set A/D channel type result=40 00:36:37 Set A/D encoding result=40 00:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:37 Set channel filter=0.000000e+000 result=40 00:36:37 Config A/D Result=40 00:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:37 Get A/D filter: -9.255963e+061 result=40 00:36:37 Get A/D value=-858993460 result=40 00:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:37 Parameters OK 00:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:37 Set A/D data flow result=40 00:36:37 Set A/D channel type result=40 00:36:37 Set A/D encoding result=40 00:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:37 Set channel filter=0.000000e+000 result=40 00:36:37 Config A/D Result=40 00:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:37 Get A/D filter: -9.255963e+061 result=40 00:36:37 Get A/D value=-858993460 result=40 00:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:37 Aux= 00:36:37 Message to Camera, serial 203646 queued 00:37:14 Received message from Master: op=PointingHead serial=203659 00:37:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:37:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:37:14 Point started: ret=0 00:37:14 point_skyscan result=0 00:37:15 Check angles 00:37:15 SkyScan query 00:37:15 SkyScan query done: ret=0 az=64.17<-4278 ze=66.555<-7563 Statuses=0009 0008 00:37:15 Msec=0 True Az=64.17 Ze=66.555 Az status=0009 Ze status=0008 00:37:15 Check angles 00:37:15 SkyScan query 00:37:16 SkyScan query done: ret=0 az=81.705<-5447 ze=66.495<-7567 Statuses=0009 0008 00:37:16 Msec=750 True Az=81.705 Ze=66.495 Az status=0009 Ze status=0008 00:37:16 Check angles 00:37:16 SkyScan query 00:37:17 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 00:37:17 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 00:37:17 Check angles 00:37:17 SkyScan query 00:37:18 SkyScan query done: ret=0 az=116.715<-7781 ze=66.495<-7567 Statuses=0009 0008 00:37:18 Msec=2250 True Az=116.715 Ze=66.495 Az status=0009 Ze status=0008 00:37:18 Check angles 00:37:18 SkyScan query 00:37:18 SkyScan query done: ret=0 az=134.13<-8942 ze=66.495<-7567 Statuses=0009 0008 00:37:18 Msec=3000 True Az=134.13 Ze=66.495 Az status=0009 Ze status=0008 00:37:18 Check angles 00:37:18 SkyScan query 00:37:19 SkyScan query done: ret=0 az=151.44<-10096 ze=66.495<-7567 Statuses=0009 0008 00:37:19 Msec=3750 True Az=151.44 Ze=66.495 Az status=0009 Ze status=0008 00:37:19 Check angles 00:37:19 SkyScan query 00:37:20 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 00:37:20 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 00:37:20 Message to Master queued w/err=0: serial=203659 error=0 00:37:25 Received message from Master: op=Filter serial=203660 00:37:25 Color wheel filter change from 0 to 0 00:37:25 FLIGetFilterPos err=0 currentPosition=0 00:37:25 FLIGetStepsRemaining err=0 RemainingSteps=0 00:37:25 Filter is already there-color wheel unchanged 00:37:25 Received message from Master: op=Shutter serial=203661 00:37:25 Shutter LASER close 00:37:25 Received message from Camera: op=State serial=203663 00:37:25 GetSingleValue result=40 Value=cccccccc 00:37:25 SkyScan query 00:37:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:37:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:26 Parameters OK 00:37:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:26 Set A/D data flow result=40 00:37:26 Set A/D channel type result=40 00:37:26 Set A/D encoding result=40 00:37:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:26 Set channel filter=0.000000e+000 result=40 00:37:26 Config A/D Result=40 00:37:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:26 Get A/D filter: -9.255963e+061 result=40 00:37:26 Get A/D value=-858993460 result=40 00:37:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:26 Parameters OK 00:37:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:26 Set A/D data flow result=40 00:37:26 Set A/D channel type result=40 00:37:26 Set A/D encoding result=40 00:37:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:26 Set channel filter=0.000000e+000 result=40 00:37:26 Config A/D Result=40 00:37:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:26 Get A/D filter: -9.255963e+061 result=40 00:37:26 Get A/D value=-858993460 result=40 00:37:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:37:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:37:26 Aux= 00:37:26 Message to Camera, serial 203663 queued 00:38:02 Received message from Master: op=PointingHead serial=203676 00:38:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:38:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:38:03 Point started: ret=0 00:38:03 point_skyscan result=0 00:38:03 Check angles 00:38:03 SkyScan query 00:38:04 SkyScan query done: ret=0 az=134.82<-8988 ze=36.615<-9559 Statuses=0009 0009 00:38:04 Msec=0 True Az=134.82 Ze=36.615 Az status=0009 Ze status=0009 00:38:04 Check angles 00:38:04 SkyScan query 00:38:05 SkyScan query done: ret=0 az=117.3<-7820 ze=15.69<-10954 Statuses=0009 0009 00:38:05 Msec=750 True Az=117.3 Ze=15.69 Az status=0009 Ze status=0009 00:38:05 Check angles 00:38:05 SkyScan query 00:38:06 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.28<-12352 Statuses=0009 0009 00:38:06 Msec=1500 True Az=99.96 Ze=-5.28 Az status=0009 Ze status=0009 00:38:06 Check angles 00:38:06 SkyScan query 00:38:06 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.235<-13749 Statuses=0009 0009 00:38:06 Msec=2250 True Az=82.335 Ze=-26.235 Az status=0009 Ze status=0009 00:38:06 Check angles 00:38:06 SkyScan query 00:38:07 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.595<-14573 Statuses=0009 0008 00:38:07 Msec=3000 True Az=64.92 Ze=-38.595 Az status=0009 Ze status=0008 00:38:07 Check angles 00:38:07 SkyScan query 00:38:08 SkyScan query done: ret=0 az=47.535<-3169 ze=-38.52<-14568 Statuses=0009 0008 00:38:08 Msec=3750 True Az=47.535 Ze=-38.52 Az status=0009 Ze status=0008 00:38:08 Check angles 00:38:08 SkyScan query 00:38:09 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 00:38:09 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 00:38:09 Message to Master queued w/err=0: serial=203676 error=0 00:38:14 Received message from Master: op=Filter serial=203677 00:38:14 Color wheel filter change from 0 to 0 00:38:14 FLIGetFilterPos err=0 currentPosition=0 00:38:14 FLIGetStepsRemaining err=0 RemainingSteps=0 00:38:14 Filter is already there-color wheel unchanged 00:38:14 Received message from Master: op=Shutter serial=203678 00:38:14 Shutter LASER close 00:38:14 Received message from Camera: op=State serial=203680 00:38:14 GetSingleValue result=40 Value=cccccccc 00:38:14 SkyScan query 00:38:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:38:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:14 Parameters OK 00:38:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:14 Set A/D data flow result=40 00:38:14 Set A/D channel type result=40 00:38:14 Set A/D encoding result=40 00:38:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:14 Set channel filter=0.000000e+000 result=40 00:38:14 Config A/D Result=40 00:38:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:14 Get A/D filter: -9.255963e+061 result=40 00:38:14 Get A/D value=-858993460 result=40 00:38:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:14 Parameters OK 00:38:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:14 Set A/D data flow result=40 00:38:14 Set A/D channel type result=40 00:38:14 Set A/D encoding result=40 00:38:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:14 Set channel filter=0.000000e+000 result=40 00:38:14 Config A/D Result=40 00:38:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:14 Get A/D filter: -9.255963e+061 result=40 00:38:14 Get A/D value=-858993460 result=40 00:38:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:38:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:38:14 Aux= 00:38:14 Message to Camera, serial 203680 queued 00:38:51 Received message from Master: op=PointingHead serial=203693 00:38:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:38:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:38:52 Point started: ret=0 00:38:52 point_skyscan result=0 00:38:52 Check angles 00:38:52 SkyScan query 00:38:53 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.31<-16554 Statuses=0009 0009 00:38:53 Msec=0 True Az=63.96 Ze=-68.31 Az status=0009 Ze status=0009 00:38:53 Check angles 00:38:53 SkyScan query 00:38:54 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.355<-17957 Statuses=0009 0009 00:38:54 Msec=750 True Az=81.435 Ze=-89.355 Az status=0009 Ze status=0009 00:38:54 Check angles 00:38:54 SkyScan query 00:38:54 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.205<-19347 Statuses=0009 0009 00:38:54 Msec=1500 True Az=98.955 Ze=-110.205 Az status=0009 Ze status=0009 00:38:55 Check angles 00:38:55 SkyScan query 00:38:55 SkyScan query done: ret=0 az=116.37<-7758 ze=-131.175<-20745 Statuses=0009 0009 00:38:55 Msec=2250 True Az=116.37 Ze=-131.175 Az status=0009 Ze status=0009 00:38:55 Check angles 00:38:55 SkyScan query 00:38:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 00:38:56 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 00:38:56 Check angles 00:38:56 SkyScan query 00:38:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:38:57 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:38:57 Message to Master queued w/err=0: serial=203693 error=0 00:39:02 Received message from Master: op=Filter serial=203694 00:39:02 Color wheel filter change from 0 to 0 00:39:02 FLIGetFilterPos err=0 currentPosition=0 00:39:02 FLIGetStepsRemaining err=0 RemainingSteps=0 00:39:02 Filter is already there-color wheel unchanged 00:39:02 Received message from Master: op=Shutter serial=203695 00:39:02 Shutter LASER close 00:39:02 Received message from Camera: op=State serial=203697 00:39:02 GetSingleValue result=40 Value=cccccccc 00:39:02 SkyScan query 00:39:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:39:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:02 Parameters OK 00:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:02 Set A/D data flow result=40 00:39:02 Set A/D channel type result=40 00:39:02 Set A/D encoding result=40 00:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:02 Set channel filter=0.000000e+000 result=40 00:39:02 Config A/D Result=40 00:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:02 Get A/D filter: -9.255963e+061 result=40 00:39:02 Get A/D value=-858993460 result=40 00:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:02 Parameters OK 00:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:02 Set A/D data flow result=40 00:39:02 Set A/D channel type result=40 00:39:02 Set A/D encoding result=40 00:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:02 Set channel filter=0.000000e+000 result=40 00:39:02 Config A/D Result=40 00:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:02 Get A/D filter: -9.255963e+061 result=40 00:39:02 Get A/D value=-858993460 result=40 00:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:39:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:39:02 Aux= 00:39:02 Message to Camera, serial 203697 queued 00:39:39 Received message from Master: op=PointingHead serial=203710 00:39:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:39:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:39:40 Point started: ret=0 00:39:40 point_skyscan result=0 00:39:40 Check angles 00:39:40 SkyScan query 00:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0008 0009 00:39:41 Msec=0 True Az=112.995 Ze=-171.48 Az status=0008 Ze status=0009 00:39:41 Check angles 00:39:41 SkyScan query 00:39:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:39:42 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:39:42 Message to Master queued w/err=0: serial=203710 error=0 00:39:47 Received message from Master: op=Filter serial=203711 00:39:47 Color wheel filter change from 0 to 0 00:39:47 FLIGetFilterPos err=0 currentPosition=0 00:39:47 FLIGetStepsRemaining err=0 RemainingSteps=0 00:39:47 Filter is already there-color wheel unchanged 00:39:47 Received message from Master: op=Shutter serial=203712 00:39:47 Shutter LASER open 00:39:47 Received message from Camera: op=State serial=203714 00:39:47 GetSingleValue result=40 Value=cccccccc 00:39:47 SkyScan query 00:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:39:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:48 Parameters OK 00:39:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:48 Set A/D data flow result=40 00:39:48 Set A/D channel type result=40 00:39:48 Set A/D encoding result=40 00:39:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:48 Set channel filter=0.000000e+000 result=40 00:39:48 Config A/D Result=40 00:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:48 Get A/D filter: -9.255963e+061 result=40 00:39:48 Get A/D value=-858993460 result=40 00:39:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:48 Parameters OK 00:39:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:48 Set A/D data flow result=40 00:39:48 Set A/D channel type result=40 00:39:48 Set A/D encoding result=40 00:39:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:48 Set channel filter=0.000000e+000 result=40 00:39:48 Config A/D Result=40 00:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:48 Get A/D filter: -9.255963e+061 result=40 00:39:48 Get A/D value=-858993460 result=40 00:39:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:39:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:39:48 Aux= 00:39:48 Message to Camera, serial 203714 queued 00:39:56 Received message from Master: op=Shutter serial=203724 00:39:56 Shutter LASER close 00:39:57 Received message from Master: op=PointingHead serial=203728 00:39:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:39:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:39:57 Point started: ret=0 00:39:57 point_skyscan result=0 00:39:58 Check angles 00:39:58 SkyScan query 00:39:58 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.4<-21560 Statuses=0009 0009 00:39:58 Msec=0 True Az=135.84 Ze=-143.4 Az status=0009 Ze status=0009 00:39:59 Check angles 00:39:59 SkyScan query 00:39:59 SkyScan query done: ret=0 az=153.315<-10221 ze=-122.4<-20160 Statuses=0009 0009 00:39:59 Msec=750 True Az=153.315 Ze=-122.4 Az status=0009 Ze status=0009 00:39:59 Check angles 00:39:59 SkyScan query 00:40:00 SkyScan query done: ret=0 az=170.925<-11395 ze=-101.505<-18767 Statuses=0009 0009 00:40:00 Msec=1500 True Az=170.925 Ze=-101.505 Az status=0009 Ze status=0009 00:40:00 Check angles 00:40:00 SkyScan query 00:40:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.535<-17369 Statuses=0008 0009 00:40:01 Msec=2250 True Az=175.995 Ze=-80.535 Az status=0008 Ze status=0009 00:40:01 Check angles 00:40:01 SkyScan query 00:40:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.565<-15971 Statuses=0008 0009 00:40:01 Msec=3000 True Az=175.995 Ze=-59.565 Az status=0008 Ze status=0009 00:40:02 Check angles 00:40:02 SkyScan query 00:40:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:40:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:40:02 Message to Master queued w/err=0: serial=203728 error=0 00:40:07 Received message from Master: op=Filter serial=203729 00:40:07 Color wheel filter change from 0 to 0 00:40:07 FLIGetFilterPos err=0 currentPosition=0 00:40:07 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:07 Filter is already there-color wheel unchanged 00:40:07 Received message from Master: op=Shutter serial=203730 00:40:07 Shutter LASER close 00:40:07 Received message from Camera: op=State serial=203732 00:40:07 GetSingleValue result=40 Value=cccccccc 00:40:07 SkyScan query 00:40:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:40:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:08 Parameters OK 00:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:08 Set A/D data flow result=40 00:40:08 Set A/D channel type result=40 00:40:08 Set A/D encoding result=40 00:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:08 Set channel filter=0.000000e+000 result=40 00:40:08 Config A/D Result=40 00:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:08 Get A/D filter: -9.255963e+061 result=40 00:40:08 Get A/D value=-858993460 result=40 00:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:08 Parameters OK 00:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:08 Set A/D data flow result=40 00:40:08 Set A/D channel type result=40 00:40:08 Set A/D encoding result=40 00:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:08 Set channel filter=0.000000e+000 result=40 00:40:08 Config A/D Result=40 00:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:08 Get A/D filter: -9.255963e+061 result=40 00:40:08 Get A/D value=-858993460 result=40 00:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:08 Aux= 00:40:08 Message to Camera, serial 203732 queued 00:40:45 Received message from Master: op=PointingHead serial=203745 00:40:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:40:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:40:45 Point started: ret=0 00:40:45 point_skyscan result=0 00:40:46 Check angles 00:40:46 SkyScan query 00:40:47 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.02<-13468 Statuses=0009 0009 00:40:47 Msec=0 True Az=153.21 Ze=-22.02 Az status=0009 Ze status=0009 00:40:47 Check angles 00:40:47 SkyScan query 00:40:47 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.57<-12038 Statuses=0009 0009 00:40:47 Msec=750 True Az=135.42 Ze=-0.57 Az status=0009 Ze status=0009 00:40:47 Check angles 00:40:47 SkyScan query 00:40:48 SkyScan query done: ret=0 az=117.765<-7851 ze=20.37<-10642 Statuses=0009 0009 00:40:48 Msec=1500 True Az=117.765 Ze=20.37 Az status=0009 Ze status=0009 00:40:48 Check angles 00:40:48 SkyScan query 00:40:49 SkyScan query done: ret=0 az=100.425<-6695 ze=41.355<-9243 Statuses=0009 0009 00:40:49 Msec=2250 True Az=100.425 Ze=41.355 Az status=0009 Ze status=0009 00:40:49 Check angles 00:40:49 SkyScan query 00:40:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 00:40:50 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 00:40:50 Check angles 00:40:50 SkyScan query 00:40:50 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 00:40:50 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 00:40:50 Message to Master queued w/err=0: serial=203745 error=0 00:40:55 Received message from Master: op=Filter serial=203746 00:40:55 Color wheel filter change from 0 to 0 00:40:55 FLIGetFilterPos err=0 currentPosition=0 00:40:55 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:55 Filter is already there-color wheel unchanged 00:40:56 Received message from Master: op=Shutter serial=203747 00:40:56 Shutter LASER close 00:40:56 Received message from Camera: op=State serial=203749 00:40:56 GetSingleValue result=40 Value=cccccccc 00:40:56 SkyScan query 00:40:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:40:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:56 Parameters OK 00:40:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:56 Set A/D data flow result=40 00:40:56 Set A/D channel type result=40 00:40:56 Set A/D encoding result=40 00:40:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:56 Set channel filter=0.000000e+000 result=40 00:40:56 Config A/D Result=40 00:40:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:56 Get A/D filter: -9.255963e+061 result=40 00:40:56 Get A/D value=-858993460 result=40 00:40:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:56 Parameters OK 00:40:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:56 Set A/D data flow result=40 00:40:56 Set A/D channel type result=40 00:40:56 Set A/D encoding result=40 00:40:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:56 Set channel filter=0.000000e+000 result=40 00:40:56 Config A/D Result=40 00:40:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:56 Get A/D filter: -9.255963e+061 result=40 00:40:56 Get A/D value=-858993460 result=40 00:40:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:56 Aux= 00:40:56 Message to Camera, serial 203749 queued 00:41:33 Received message from Master: op=PointingHead serial=203762 00:41:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:41:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:41:33 Point started: ret=0 00:41:33 point_skyscan result=0 00:41:34 Check angles 00:41:34 SkyScan query 00:41:35 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 00:41:35 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 00:41:35 Check angles 00:41:35 SkyScan query 00:41:35 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 00:41:35 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 00:41:36 Check angles 00:41:36 SkyScan query 00:41:36 SkyScan query done: ret=0 az=143.91<-9594 ze=38.505<-9433 Statuses=0009 0008 00:41:36 Msec=1500 True Az=143.91 Ze=38.505 Az status=0009 Ze status=0008 00:41:36 Check angles 00:41:36 SkyScan query 00:41:37 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 00:41:37 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 00:41:37 Check angles 00:41:37 SkyScan query 00:41:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:41:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:41:38 Check angles 00:41:38 SkyScan query 00:41:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:41:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:41:38 Message to Master queued w/err=0: serial=203762 error=0 00:41:43 Received message from Master: op=Filter serial=203763 00:41:43 Color wheel filter change from 0 to 0 00:41:43 FLIGetFilterPos err=0 currentPosition=0 00:41:43 FLIGetStepsRemaining err=0 RemainingSteps=0 00:41:43 Filter is already there-color wheel unchanged 00:41:44 Received message from Master: op=Shutter serial=203764 00:41:44 Shutter LASER close 00:41:44 Received message from Camera: op=State serial=203766 00:41:44 GetSingleValue result=40 Value=cccccccc 00:41:44 SkyScan query 00:41:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:41:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:44 Parameters OK 00:41:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:44 Set A/D data flow result=40 00:41:44 Set A/D channel type result=40 00:41:44 Set A/D encoding result=40 00:41:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:44 Set channel filter=0.000000e+000 result=40 00:41:44 Config A/D Result=40 00:41:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:44 Get A/D filter: -9.255963e+061 result=40 00:41:44 Get A/D value=-858993460 result=40 00:41:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:44 Parameters OK 00:41:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:44 Set A/D data flow result=40 00:41:44 Set A/D channel type result=40 00:41:44 Set A/D encoding result=40 00:41:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:44 Set channel filter=0.000000e+000 result=40 00:41:44 Config A/D Result=40 00:41:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:44 Get A/D filter: -9.255963e+061 result=40 00:41:44 Get A/D value=-858993460 result=40 00:41:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:41:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:41:44 Aux= 00:41:44 Message to Camera, serial 203766 queued 00:42:21 Received message from Master: op=PointingHead serial=203779 00:42:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:42:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:42:21 Point started: ret=0 00:42:21 point_skyscan result=0 00:42:22 Check angles 00:42:22 SkyScan query 00:42:23 SkyScan query done: ret=0 az=152.745<-10183 ze=8.25<-11450 Statuses=0009 0009 00:42:23 Msec=0 True Az=152.745 Ze=8.25 Az status=0009 Ze status=0009 00:42:23 Check angles 00:42:23 SkyScan query 00:42:24 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.6<-12840 Statuses=0009 0009 00:42:24 Msec=750 True Az=135.21 Ze=-12.6 Az status=0009 Ze status=0009 00:42:24 Check angles 00:42:24 SkyScan query 00:42:24 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.645<-14243 Statuses=0009 0009 00:42:24 Msec=1500 True Az=117.6 Ze=-33.645 Az status=0009 Ze status=0009 00:42:24 Check angles 00:42:24 SkyScan query 00:42:25 SkyScan query done: ret=0 az=100.335<-6689 ze=-51.57<-15438 Statuses=0009 0009 00:42:25 Msec=2250 True Az=100.335 Ze=-51.57 Az status=0009 Ze status=0009 00:42:25 Check angles 00:42:25 SkyScan query 00:42:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 00:42:26 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 00:42:26 Check angles 00:42:26 SkyScan query 00:42:27 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 00:42:27 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 00:42:27 Message to Master queued w/err=0: serial=203779 error=0 00:42:32 Received message from Master: op=Filter serial=203780 00:42:32 Color wheel filter change from 0 to 0 00:42:32 FLIGetFilterPos err=0 currentPosition=0 00:42:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:32 Filter is already there-color wheel unchanged 00:42:32 Received message from Master: op=Shutter serial=203781 00:42:32 Shutter LASER close 00:42:32 Received message from Camera: op=State serial=203783 00:42:32 GetSingleValue result=40 Value=cccccccc 00:42:32 SkyScan query 00:42:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:42:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:32 Parameters OK 00:42:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:32 Set A/D data flow result=40 00:42:32 Set A/D channel type result=40 00:42:32 Set A/D encoding result=40 00:42:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:32 Set channel filter=0.000000e+000 result=40 00:42:32 Config A/D Result=40 00:42:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:32 Get A/D filter: -9.255963e+061 result=40 00:42:32 Get A/D value=-858993460 result=40 00:42:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:32 Parameters OK 00:42:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:32 Set A/D data flow result=40 00:42:32 Set A/D channel type result=40 00:42:32 Set A/D encoding result=40 00:42:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:32 Set channel filter=0.000000e+000 result=40 00:42:32 Config A/D Result=40 00:42:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:32 Get A/D filter: -9.255963e+061 result=40 00:42:32 Get A/D value=-858993460 result=40 00:42:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:32 Aux= 00:42:32 Message to Camera, serial 203783 queued 00:43:09 Received message from Master: op=PointingHead serial=203796 00:43:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:43:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:43:09 Point started: ret=0 00:43:09 point_skyscan result=0 00:43:10 Check angles 00:43:10 SkyScan query 00:43:11 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.315<-17421 Statuses=0009 0009 00:43:11 Msec=0 True Az=109.185 Ze=-81.315 Az status=0009 Ze status=0009 00:43:11 Check angles 00:43:11 SkyScan query 00:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 00:43:12 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 00:43:12 Check angles 00:43:12 SkyScan query 00:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 00:43:12 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 00:43:12 Check angles 00:43:12 SkyScan query 00:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 00:43:13 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 00:43:13 Check angles 00:43:13 SkyScan query 00:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 00:43:14 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 00:43:14 Check angles 00:43:14 SkyScan query 00:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:43:15 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:43:15 Message to Master queued w/err=0: serial=203796 error=0 00:43:20 Received message from Master: op=Filter serial=203797 00:43:20 Color wheel filter change from 0 to 0 00:43:20 FLIGetFilterPos err=0 currentPosition=0 00:43:20 FLIGetStepsRemaining err=0 RemainingSteps=0 00:43:20 Filter is already there-color wheel unchanged 00:43:20 Received message from Master: op=Shutter serial=203798 00:43:20 Shutter LASER open 00:43:20 Received message from Camera: op=State serial=203800 00:43:20 GetSingleValue result=40 Value=cccccccc 00:43:20 SkyScan query 00:43:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:43:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:21 Parameters OK 00:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:21 Set A/D data flow result=40 00:43:21 Set A/D channel type result=40 00:43:21 Set A/D encoding result=40 00:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:21 Set channel filter=0.000000e+000 result=40 00:43:21 Config A/D Result=40 00:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:21 Get A/D filter: -9.255963e+061 result=40 00:43:21 Get A/D value=-858993460 result=40 00:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:21 Parameters OK 00:43:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:21 Set A/D data flow result=40 00:43:21 Set A/D channel type result=40 00:43:21 Set A/D encoding result=40 00:43:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:21 Set channel filter=0.000000e+000 result=40 00:43:21 Config A/D Result=40 00:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:21 Get A/D filter: -9.255963e+061 result=40 00:43:21 Get A/D value=-858993460 result=40 00:43:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:43:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:43:21 Aux= 00:43:21 Message to Camera, serial 203800 queued 00:43:29 Received message from Master: op=Shutter serial=203810 00:43:29 Shutter LASER close 00:43:29 Received message from Master: op=PointingHead serial=203814 00:43:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:43:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:43:30 Point started: ret=0 00:43:30 point_skyscan result=0 00:43:30 Check angles 00:43:30 SkyScan query 00:43:31 SkyScan query done: ret=0 az=89.52<-5968 ze=156.75<-1550 Statuses=0009 0009 00:43:31 Msec=0 True Az=89.52 Ze=156.75 Az status=0009 Ze status=0009 00:43:31 Check angles 00:43:31 SkyScan query 00:43:32 SkyScan query done: ret=0 az=72.03<-4802 ze=135.81<-2946 Statuses=0009 0009 00:43:32 Msec=750 True Az=72.03 Ze=135.81 Az status=0009 Ze status=0009 00:43:32 Check angles 00:43:32 SkyScan query 00:43:33 SkyScan query done: ret=0 az=54.645<-3643 ze=114.69<-4354 Statuses=0009 0009 00:43:33 Msec=1500 True Az=54.645 Ze=114.69 Az status=0009 Ze status=0009 00:43:33 Check angles 00:43:33 SkyScan query 00:43:33 SkyScan query done: ret=0 az=40.98<-2732 ze=93.45<-5770 Statuses=0009 0009 00:43:33 Msec=2250 True Az=40.98 Ze=93.45 Az status=0009 Ze status=0009 00:43:34 Check angles 00:43:34 SkyScan query 00:43:34 SkyScan query done: ret=0 az=40.98<-2732 ze=72.09<-7194 Statuses=0008 0009 00:43:34 Msec=3000 True Az=40.98 Ze=72.09 Az status=0008 Ze status=0009 00:43:34 Check angles 00:43:34 SkyScan query 00:43:35 SkyScan query done: ret=0 az=40.98<-2732 ze=52.08<-8528 Statuses=0008 0009 00:43:35 Msec=3750 True Az=40.98 Ze=52.08 Az status=0008 Ze status=0009 00:43:35 Check angles 00:43:35 SkyScan query 00:43:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:43:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:43:36 Message to Master queued w/err=0: serial=203814 error=0 00:43:41 Received message from Master: op=Filter serial=203815 00:43:41 Color wheel filter change from 0 to 0 00:43:41 FLIGetFilterPos err=0 currentPosition=0 00:43:41 FLIGetStepsRemaining err=0 RemainingSteps=0 00:43:41 Filter is already there-color wheel unchanged 00:43:41 Received message from Master: op=Shutter serial=203816 00:43:41 Shutter LASER close 00:43:41 Received message from Camera: op=State serial=203818 00:43:41 GetSingleValue result=40 Value=cccccccc 00:43:41 SkyScan query 00:43:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:43:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:42 Parameters OK 00:43:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:42 Set A/D data flow result=40 00:43:42 Set A/D channel type result=40 00:43:42 Set A/D encoding result=40 00:43:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:42 Set channel filter=0.000000e+000 result=40 00:43:42 Config A/D Result=40 00:43:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:42 Get A/D filter: -9.255963e+061 result=40 00:43:42 Get A/D value=-858993460 result=40 00:43:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:42 Parameters OK 00:43:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:42 Set A/D data flow result=40 00:43:42 Set A/D channel type result=40 00:43:42 Set A/D encoding result=40 00:43:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:42 Set channel filter=0.000000e+000 result=40 00:43:42 Config A/D Result=40 00:43:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:42 Get A/D filter: -9.255963e+061 result=40 00:43:42 Get A/D value=-858993460 result=40 00:43:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:43:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:43:42 Aux= 00:43:42 Message to Camera, serial 203818 queued 00:44:17 Received message from Master: op=PointingHead serial=203830 00:44:17 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:44:17 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:44:18 Point started: ret=0 00:44:18 point_skyscan result=0 00:44:19 Check angles 00:44:19 SkyScan query 00:44:19 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 00:44:19 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 00:44:19 Check angles 00:44:19 SkyScan query 00:44:20 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 00:44:20 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 00:44:20 Check angles 00:44:20 SkyScan query 00:44:21 SkyScan query done: ret=0 az=98.895<-6593 ze=66.495<-7567 Statuses=0009 0008 00:44:21 Msec=1500 True Az=98.895 Ze=66.495 Az status=0009 Ze status=0008 00:44:21 Check angles 00:44:21 SkyScan query 00:44:21 SkyScan query done: ret=0 az=116.355<-7757 ze=66.495<-7567 Statuses=0009 0008 00:44:21 Msec=2250 True Az=116.355 Ze=66.495 Az status=0009 Ze status=0008 00:44:22 Check angles 00:44:22 SkyScan query 00:44:22 SkyScan query done: ret=0 az=133.815<-8921 ze=66.495<-7567 Statuses=0009 0008 00:44:22 Msec=3000 True Az=133.815 Ze=66.495 Az status=0009 Ze status=0008 00:44:22 Check angles 00:44:22 SkyScan query 00:44:23 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 00:44:23 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 00:44:23 Check angles 00:44:23 SkyScan query 00:44:24 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:44:24 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:44:24 Message to Master queued w/err=0: serial=203830 error=0 00:44:29 Received message from Master: op=Filter serial=203831 00:44:29 Color wheel filter change from 0 to 0 00:44:29 FLIGetFilterPos err=0 currentPosition=0 00:44:29 FLIGetStepsRemaining err=0 RemainingSteps=0 00:44:29 Filter is already there-color wheel unchanged 00:44:29 Received message from Master: op=Shutter serial=203832 00:44:29 Shutter LASER close 00:44:29 Received message from Camera: op=State serial=203834 00:44:29 GetSingleValue result=40 Value=cccccccc 00:44:29 SkyScan query 00:44:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:44:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:29 Parameters OK 00:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:29 Set A/D data flow result=40 00:44:29 Set A/D channel type result=40 00:44:29 Set A/D encoding result=40 00:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:29 Set channel filter=0.000000e+000 result=40 00:44:29 Config A/D Result=40 00:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:29 Get A/D filter: -9.255963e+061 result=40 00:44:29 Get A/D value=-858993460 result=40 00:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:29 Parameters OK 00:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:29 Set A/D data flow result=40 00:44:29 Set A/D channel type result=40 00:44:29 Set A/D encoding result=40 00:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:29 Set channel filter=0.000000e+000 result=40 00:44:29 Config A/D Result=40 00:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:29 Get A/D filter: -9.255963e+061 result=40 00:44:29 Get A/D value=-858993460 result=40 00:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:29 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:44:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:44:29 Aux= 00:44:29 Message to Camera, serial 203834 queued 00:45:06 Received message from Master: op=PointingHead serial=203847 00:45:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:45:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:45:07 Point started: ret=0 00:45:07 point_skyscan result=0 00:45:07 Check angles 00:45:07 SkyScan query 00:45:08 SkyScan query done: ret=0 az=134.955<-8997 ze=36.66<-9556 Statuses=0009 0009 00:45:08 Msec=0 True Az=134.955 Ze=36.66 Az status=0009 Ze status=0009 00:45:08 Check angles 00:45:08 SkyScan query 00:45:09 SkyScan query done: ret=0 az=117.075<-7805 ze=15.3<-10980 Statuses=0009 0009 00:45:09 Msec=750 True Az=117.075 Ze=15.3 Az status=0009 Ze status=0009 00:45:09 Check angles 00:45:09 SkyScan query 00:45:09 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.73<-12382 Statuses=0009 0009 00:45:09 Msec=1500 True Az=99.81 Ze=-5.73 Az status=0009 Ze status=0009 00:45:10 Check angles 00:45:10 SkyScan query 00:45:10 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.685<-13779 Statuses=0009 0009 00:45:10 Msec=2250 True Az=82.215 Ze=-26.685 Az status=0009 Ze status=0009 00:45:10 Check angles 00:45:10 SkyScan query 00:45:11 SkyScan query done: ret=0 az=64.305<-4287 ze=-38.595<-14573 Statuses=0009 0008 00:45:11 Msec=3000 True Az=64.305 Ze=-38.595 Az status=0009 Ze status=0008 00:45:11 Check angles 00:45:11 SkyScan query 00:45:12 SkyScan query done: ret=0 az=46.86<-3124 ze=-38.52<-14568 Statuses=0009 0008 00:45:12 Msec=3750 True Az=46.86 Ze=-38.52 Az status=0009 Ze status=0008 00:45:12 Check angles 00:45:12 SkyScan query 00:45:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:45:12 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:45:12 Message to Master queued w/err=0: serial=203847 error=0 00:45:17 Received message from Master: op=Filter serial=203848 00:45:17 Color wheel filter change from 0 to 0 00:45:17 FLIGetFilterPos err=0 currentPosition=0 00:45:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:17 Filter is already there-color wheel unchanged 00:45:18 Received message from Master: op=Shutter serial=203849 00:45:18 Shutter LASER close 00:45:18 Received message from Camera: op=State serial=203851 00:45:18 GetSingleValue result=40 Value=cccccccc 00:45:18 SkyScan query 00:45:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:45:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:18 Parameters OK 00:45:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:18 Set A/D data flow result=40 00:45:18 Set A/D channel type result=40 00:45:18 Set A/D encoding result=40 00:45:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:18 Set channel filter=0.000000e+000 result=40 00:45:18 Config A/D Result=40 00:45:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:18 Get A/D filter: -9.255963e+061 result=40 00:45:18 Get A/D value=-858993460 result=40 00:45:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:18 Parameters OK 00:45:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:18 Set A/D data flow result=40 00:45:18 Set A/D channel type result=40 00:45:18 Set A/D encoding result=40 00:45:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:18 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-17 00:45:18] 00:45:18 Config A/D Result=40 00:45:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:18 Get A/D filter: -9.255963e+061 result=40 00:45:18 Get A/D value=-858993460 result=40 00:45:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:18 Aux= 00:45:18 Message to Camera, serial 203851 queued 00:45:27 Received message from Master: op=Identify serial=203852 00:45:55 Received message from Master: op=PointingHead serial=203867 00:45:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:45:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:45:55 Point started: ret=0 00:45:55 point_skyscan result=0 00:45:56 Check angles 00:45:56 SkyScan query 00:45:57 SkyScan query done: ret=0 az=64.11<-4274 ze=-68.475<-16565 Statuses=0009 0009 00:45:57 Msec=0 True Az=64.11 Ze=-68.475 Az status=0009 Ze status=0009 00:45:57 Check angles 00:45:57 SkyScan query 00:45:58 SkyScan query done: ret=0 az=82.035<-5469 ze=-89.85<-17990 Statuses=0009 0009 00:45:58 Msec=750 True Az=82.035 Ze=-89.85 Az status=0009 Ze status=0009 00:45:58 Check angles 00:45:58 SkyScan query 00:45:58 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.82<-19388 Statuses=0009 0009 00:45:58 Msec=1500 True Az=99.51 Ze=-110.82 Az status=0009 Ze status=0009 00:45:58 Check angles 00:45:58 SkyScan query 00:45:59 SkyScan query done: ret=0 az=116.94<-7796 ze=-131.7<-20780 Statuses=0009 0009 00:45:59 Msec=2250 True Az=116.94 Ze=-131.7 Az status=0009 Ze status=0009 00:45:59 Check angles 00:45:59 SkyScan query 00:46:00 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 00:46:00 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 00:46:00 Check angles 00:46:00 SkyScan query 00:46:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:46:01 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:46:01 Message to Master queued w/err=0: serial=203867 error=0 00:46:06 Received message from Master: op=Filter serial=203868 00:46:06 Color wheel filter change from 0 to 0 00:46:06 FLIGetFilterPos err=0 currentPosition=0 00:46:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:46:06 Filter is already there-color wheel unchanged 00:46:06 Received message from Master: op=Shutter serial=203869 00:46:06 Shutter LASER close 00:46:06 Received message from Camera: op=State serial=203871 00:46:06 GetSingleValue result=40 Value=cccccccc 00:46:06 SkyScan query 00:46:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:46:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:06 Parameters OK 00:46:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:06 Set A/D data flow result=40 00:46:06 Set A/D channel type result=40 00:46:06 Set A/D encoding result=40 00:46:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:06 Set channel filter=0.000000e+000 result=40 00:46:06 Config A/D Result=40 00:46:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:06 Get A/D filter: -9.255963e+061 result=40 00:46:06 Get A/D value=-858993460 result=40 00:46:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:06 Parameters OK 00:46:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:06 Set A/D data flow result=40 00:46:06 Set A/D channel type result=40 00:46:06 Set A/D encoding result=40 00:46:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:06 Set channel filter=0.000000e+000 result=40 00:46:06 Config A/D Result=40 00:46:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:06 Get A/D filter: -9.255963e+061 result=40 00:46:06 Get A/D value=-858993460 result=40 00:46:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:46:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:46:06 Aux= 00:46:06 Message to Camera, serial 203871 queued 00:46:43 Received message from Master: op=PointingHead serial=203884 00:46:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:46:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:46:44 Point started: ret=0 00:46:44 point_skyscan result=0 00:46:44 Check angles 00:46:44 SkyScan query 00:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0009 0009 00:46:45 Msec=0 True Az=112.995 Ze=-171.105 Az status=0009 Ze status=0009 00:46:45 Check angles 00:46:45 SkyScan query 00:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:46:46 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:46:46 Message to Master queued w/err=0: serial=203884 error=0 00:46:51 Received message from Master: op=Filter serial=203885 00:46:51 Color wheel filter change from 0 to 0 00:46:51 FLIGetFilterPos err=0 currentPosition=0 00:46:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:46:51 Filter is already there-color wheel unchanged 00:46:51 Received message from Master: op=Shutter serial=203886 00:46:51 Shutter LASER open 00:46:51 Received message from Camera: op=State serial=203888 00:46:51 GetSingleValue result=40 Value=cccccccc 00:46:51 SkyScan query 00:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:46:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:52 Parameters OK 00:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:52 Set A/D data flow result=40 00:46:52 Set A/D channel type result=40 00:46:52 Set A/D encoding result=40 00:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:52 Set channel filter=0.000000e+000 result=40 00:46:52 Config A/D Result=40 00:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:52 Get A/D filter: -9.255963e+061 result=40 00:46:52 Get A/D value=-858993460 result=40 00:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:52 Parameters OK 00:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:52 Set A/D data flow result=40 00:46:52 Set A/D channel type result=40 00:46:52 Set A/D encoding result=40 00:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:52 Set channel filter=0.000000e+000 result=40 00:46:52 Config A/D Result=40 00:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:52 Get A/D filter: -9.255963e+061 result=40 00:46:52 Get A/D value=-858993460 result=40 00:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:46:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:46:52 Aux= 00:46:52 Message to Camera, serial 203888 queued 00:47:00 Received message from Master: op=Shutter serial=203898 00:47:00 Shutter LASER close 00:47:01 Received message from Master: op=PointingHead serial=203902 00:47:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:47:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:47:01 Point started: ret=0 00:47:01 point_skyscan result=0 00:47:02 Check angles 00:47:02 SkyScan query 00:47:02 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.205<-21547 Statuses=0009 0009 00:47:02 Msec=0 True Az=135.975 Ze=-143.205 Az status=0009 Ze status=0009 00:47:02 Check angles 00:47:02 SkyScan query 00:47:03 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.205<-20147 Statuses=0009 0009 00:47:03 Msec=750 True Az=153.48 Ze=-122.205 Az status=0009 Ze status=0009 00:47:03 Check angles 00:47:03 SkyScan query 00:47:04 SkyScan query done: ret=0 az=171<-11400 ze=-101.28<-18752 Statuses=0009 0009 00:47:04 Msec=1500 True Az=171 Ze=-101.28 Az status=0009 Ze status=0009 00:47:04 Check angles 00:47:04 SkyScan query 00:47:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.325<-17355 Statuses=0008 0009 00:47:05 Msec=2250 True Az=175.995 Ze=-80.325 Az status=0008 Ze status=0009 00:47:05 Check angles 00:47:05 SkyScan query 00:47:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.355<-15957 Statuses=0008 0009 00:47:05 Msec=3000 True Az=175.995 Ze=-59.355 Az status=0008 Ze status=0009 00:47:05 Check angles 00:47:05 SkyScan query 00:47:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:47:06 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:47:06 Message to Master queued w/err=0: serial=203902 error=0 00:47:11 Received message from Master: op=Filter serial=203903 00:47:11 Color wheel filter change from 0 to 0 00:47:11 FLIGetFilterPos err=0 currentPosition=0 00:47:11 FLIGetStepsRemaining err=0 RemainingSteps=0 00:47:11 Filter is already there-color wheel unchanged 00:47:11 Received message from Master: op=Shutter serial=203904 00:47:11 Shutter LASER close 00:47:11 Received message from Camera: op=State serial=203906 00:47:11 GetSingleValue result=40 Value=cccccccc 00:47:11 SkyScan query 00:47:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:47:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:12 Parameters OK 00:47:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:12 Set A/D data flow result=40 00:47:12 Set A/D channel type result=40 00:47:12 Set A/D encoding result=40 00:47:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:12 Set channel filter=0.000000e+000 result=40 00:47:12 Config A/D Result=40 00:47:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:12 Get A/D filter: -9.255963e+061 result=40 00:47:12 Get A/D value=-858993460 result=40 00:47:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:12 Parameters OK 00:47:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:12 Set A/D data flow result=40 00:47:12 Set A/D channel type result=40 00:47:12 Set A/D encoding result=40 00:47:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:12 Set channel filter=0.000000e+000 result=40 00:47:12 Config A/D Result=40 00:47:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:12 Get A/D filter: -9.255963e+061 result=40 00:47:12 Get A/D value=-858993460 result=40 00:47:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:47:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:47:12 Aux= 00:47:12 Message to Camera, serial 203906 queued 00:47:49 Received message from Master: op=PointingHead serial=203919 00:47:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:47:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:47:49 Point started: ret=0 00:47:49 point_skyscan result=0 00:47:50 Check angles 00:47:50 SkyScan query 00:47:50 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.9<-13460 Statuses=0009 0009 00:47:50 Msec=0 True Az=153.09 Ze=-21.9 Az status=0009 Ze status=0009 00:47:51 Check angles 00:47:51 SkyScan query 00:47:51 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.885<-12059 Statuses=0009 0009 00:47:51 Msec=750 True Az=135.69 Ze=-0.885 Az status=0009 Ze status=0009 00:47:51 Check angles 00:47:51 SkyScan query 00:47:52 SkyScan query done: ret=0 az=118.065<-7871 ze=20.025<-10665 Statuses=0009 0009 00:47:52 Msec=1500 True Az=118.065 Ze=20.025 Az status=0009 Ze status=0009 00:47:52 Check angles 00:47:52 SkyScan query 00:47:53 SkyScan query done: ret=0 az=100.725<-6715 ze=41.04<-9264 Statuses=0009 0009 00:47:53 Msec=2250 True Az=100.725 Ze=41.04 Az status=0009 Ze status=0009 00:47:53 Check angles 00:47:53 SkyScan query 00:47:53 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 00:47:53 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 00:47:54 Check angles 00:47:54 SkyScan query 00:47:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:47:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:47:54 Message to Master queued w/err=0: serial=203919 error=0 00:47:59 Received message from Master: op=Filter serial=203920 00:47:59 Color wheel filter change from 0 to 0 00:47:59 FLIGetFilterPos err=0 currentPosition=0 00:47:59 FLIGetStepsRemaining err=0 RemainingSteps=0 00:47:59 Filter is already there-color wheel unchanged 00:47:59 Received message from Master: op=Shutter serial=203921 00:47:59 Shutter LASER close 00:47:59 Received message from Camera: op=State serial=203923 00:47:59 GetSingleValue result=40 Value=cccccccc 00:47:59 SkyScan query 00:48:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:48:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:00 Parameters OK 00:48:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:00 Set A/D data flow result=40 00:48:00 Set A/D channel type result=40 00:48:00 Set A/D encoding result=40 00:48:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:00 Set channel filter=0.000000e+000 result=40 00:48:00 Config A/D Result=40 00:48:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:00 Get A/D filter: -9.255963e+061 result=40 00:48:00 Get A/D value=-858993460 result=40 00:48:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:00 Parameters OK 00:48:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:00 Set A/D data flow result=40 00:48:00 Set A/D channel type result=40 00:48:00 Set A/D encoding result=40 00:48:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:00 Set channel filter=0.000000e+000 result=40 00:48:00 Config A/D Result=40 00:48:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:00 Get A/D filter: -9.255963e+061 result=40 00:48:00 Get A/D value=-858993460 result=40 00:48:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:48:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:48:00 Aux= 00:48:00 Message to Camera, serial 203923 queued 00:48:37 Received message from Master: op=PointingHead serial=203936 00:48:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:48:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:48:37 Point started: ret=0 00:48:37 point_skyscan result=0 00:48:38 Check angles 00:48:38 SkyScan query 00:48:39 SkyScan query done: ret=0 az=109.35<-7290 ze=38.49<-9434 Statuses=0009 0008 00:48:39 Msec=0 True Az=109.35 Ze=38.49 Az status=0009 Ze status=0008 00:48:39 Check angles 00:48:39 SkyScan query 00:48:39 SkyScan query done: ret=0 az=127.125<-8475 ze=38.505<-9433 Statuses=0009 0008 00:48:39 Msec=750 True Az=127.125 Ze=38.505 Az status=0009 Ze status=0008 00:48:40 Check angles 00:48:40 SkyScan query 00:48:40 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 00:48:40 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 00:48:40 Check angles 00:48:40 SkyScan query 00:48:41 SkyScan query done: ret=0 az=162.06<-10804 ze=38.505<-9433 Statuses=0009 0008 00:48:41 Msec=2250 True Az=162.06 Ze=38.505 Az status=0009 Ze status=0008 00:48:41 Check angles 00:48:41 SkyScan query 00:48:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:48:42 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:48:42 Check angles 00:48:42 SkyScan query 00:48:42 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:48:42 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:48:42 Message to Master queued w/err=0: serial=203936 error=0 00:48:47 Received message from Master: op=Filter serial=203937 00:48:47 Color wheel filter change from 0 to 0 00:48:47 FLIGetFilterPos err=0 currentPosition=0 00:48:47 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:47 Filter is already there-color wheel unchanged 00:48:48 Received message from Master: op=Shutter serial=203938 00:48:48 Shutter LASER close 00:48:48 Received message from Camera: op=State serial=203940 00:48:48 GetSingleValue result=40 Value=cccccccc 00:48:48 SkyScan query 00:48:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:48:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:48 Parameters OK 00:48:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:48 Set A/D data flow result=40 00:48:48 Set A/D channel type result=40 00:48:48 Set A/D encoding result=40 00:48:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:48 Set channel filter=0.000000e+000 result=40 00:48:48 Config A/D Result=40 00:48:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:48 Get A/D filter: -9.255963e+061 result=40 00:48:48 Get A/D value=-858993460 result=40 00:48:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:48 Parameters OK 00:48:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:48 Set A/D data flow result=40 00:48:48 Set A/D channel type result=40 00:48:48 Set A/D encoding result=40 00:48:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:48 Set channel filter=0.000000e+000 result=40 00:48:48 Config A/D Result=40 00:48:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:48 Get A/D filter: -9.255963e+061 result=40 00:48:48 Get A/D value=-858993460 result=40 00:48:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:48:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:48:48 Aux= 00:48:48 Message to Camera, serial 203940 queued 00:49:25 Received message from Master: op=PointingHead serial=203953 00:49:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:49:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:49:25 Point started: ret=0 00:49:25 point_skyscan result=0 00:49:26 Check angles 00:49:26 SkyScan query 00:49:27 SkyScan query done: ret=0 az=152.955<-10197 ze=8.655<-11423 Statuses=0009 0009 00:49:27 Msec=0 True Az=152.955 Ze=8.655 Az status=0009 Ze status=0009 00:49:27 Check angles 00:49:27 SkyScan query 00:49:27 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.315<-12821 Statuses=0009 0009 00:49:27 Msec=750 True Az=135.435 Ze=-12.315 Az status=0009 Ze status=0009 00:49:28 Check angles 00:49:28 SkyScan query 00:49:28 SkyScan query done: ret=0 az=117.96<-7864 ze=-33.255<-14217 Statuses=0009 0009 00:49:28 Msec=1500 True Az=117.96 Ze=-33.255 Az status=0009 Ze status=0009 00:49:28 Check angles 00:49:28 SkyScan query 00:49:29 SkyScan query done: ret=0 az=100.59<-6706 ze=-51.54<-15436 Statuses=0009 0009 00:49:29 Msec=2250 True Az=100.59 Ze=-51.54 Az status=0009 Ze status=0009 00:49:29 Check angles 00:49:29 SkyScan query 00:49:30 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 00:49:30 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 00:49:30 Check angles 00:49:30 SkyScan query 00:49:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:49:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:49:30 Message to Master queued w/err=0: serial=203953 error=0 00:49:35 Received message from Master: op=Filter serial=203954 00:49:35 Color wheel filter change from 0 to 0 00:49:35 FLIGetFilterPos err=0 currentPosition=0 00:49:35 FLIGetStepsRemaining err=0 RemainingSteps=0 00:49:35 Filter is already there-color wheel unchanged 00:49:36 Received message from Master: op=Shutter serial=203955 00:49:36 Shutter LASER close 00:49:36 Received message from Camera: op=State serial=203957 00:49:36 GetSingleValue result=40 Value=cccccccc 00:49:36 SkyScan query 00:49:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:49:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:36 Parameters OK 00:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:36 Set A/D data flow result=40 00:49:36 Set A/D channel type result=40 00:49:36 Set A/D encoding result=40 00:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:36 Set channel filter=0.000000e+000 result=40 00:49:36 Config A/D Result=40 00:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:36 Get A/D filter: -9.255963e+061 result=40 00:49:36 Get A/D value=-858993460 result=40 00:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:36 Parameters OK 00:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:36 Set A/D data flow result=40 00:49:36 Set A/D channel type result=40 00:49:36 Set A/D encoding result=40 00:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:36 Set channel filter=0.000000e+000 result=40 00:49:36 Config A/D Result=40 00:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:36 Get A/D filter: -9.255963e+061 result=40 00:49:36 Get A/D value=-858993460 result=40 00:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:49:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:49:36 Aux= 00:49:36 Message to Camera, serial 203957 queued 00:50:13 Received message from Master: op=PointingHead serial=203970 00:50:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:50:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:50:13 Point started: ret=0 00:50:13 point_skyscan result=0 00:50:14 Check angles 00:50:14 SkyScan query 00:50:15 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.435<-17429 Statuses=0009 0009 00:50:15 Msec=0 True Az=109.14 Ze=-81.435 Az status=0009 Ze status=0009 00:50:15 Check angles 00:50:15 SkyScan query 00:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.39<-18826 Statuses=0008 0009 00:50:15 Msec=750 True Az=112.995 Ze=-102.39 Az status=0008 Ze status=0009 00:50:16 Check angles 00:50:16 SkyScan query 00:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 00:50:16 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 00:50:16 Check angles 00:50:16 SkyScan query 00:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 00:50:17 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 00:50:17 Check angles 00:50:17 SkyScan query 00:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 00:50:18 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 00:50:18 Check angles 00:50:18 SkyScan query 00:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:50:19 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:50:19 Message to Master queued w/err=0: serial=203970 error=0 00:50:24 Received message from Master: op=Filter serial=203971 00:50:24 Color wheel filter change from 0 to 0 00:50:24 FLIGetFilterPos err=0 currentPosition=0 00:50:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:50:24 Filter is already there-color wheel unchanged 00:50:24 Received message from Master: op=Shutter serial=203972 00:50:24 Shutter LASER open 00:50:24 Received message from Camera: op=State serial=203974 00:50:24 GetSingleValue result=40 Value=cccccccc 00:50:24 SkyScan query 00:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:50:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:24 Parameters OK 00:50:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:24 Set A/D data flow result=40 00:50:24 Set A/D channel type result=40 00:50:24 Set A/D encoding result=40 00:50:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:24 Set channel filter=0.000000e+000 result=40 00:50:24 Config A/D Result=40 00:50:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:24 Get A/D filter: -9.255963e+061 result=40 00:50:24 Get A/D value=-858993460 result=40 00:50:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:24 Parameters OK 00:50:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:24 Set A/D data flow result=40 00:50:24 Set A/D channel type result=40 00:50:24 Set A/D encoding result=40 00:50:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:24 Set channel filter=0.000000e+000 result=40 00:50:24 Config A/D Result=40 00:50:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:24 Get A/D filter: -9.255963e+061 result=40 00:50:24 Get A/D value=-858993460 result=40 00:50:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:50:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:50:24 Aux= 00:50:24 Message to Camera, serial 203974 queued 00:50:33 Received message from Master: op=Shutter serial=203984 00:50:33 Shutter LASER close 00:50:33 Received message from Master: op=PointingHead serial=203988 00:50:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:50:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:50:34 Point started: ret=0 00:50:34 point_skyscan result=0 00:50:34 Check angles 00:50:34 SkyScan query 00:50:35 SkyScan query done: ret=0 az=89.865<-5991 ze=157.14<-1524 Statuses=0009 0009 00:50:35 Msec=0 True Az=89.865 Ze=157.14 Az status=0009 Ze status=0009 00:50:35 Check angles 00:50:35 SkyScan query 00:50:36 SkyScan query done: ret=0 az=72.3<-4820 ze=136.185<-2921 Statuses=0009 0009 00:50:36 Msec=750 True Az=72.3 Ze=136.185 Az status=0009 Ze status=0009 00:50:36 Check angles 00:50:36 SkyScan query 00:50:36 SkyScan query done: ret=0 az=54.99<-3666 ze=115.245<-4317 Statuses=0009 0009 00:50:36 Msec=1500 True Az=54.99 Ze=115.245 Az status=0009 Ze status=0009 00:50:37 Check angles 00:50:37 SkyScan query 00:50:37 SkyScan query done: ret=0 az=41.025<-2735 ze=94.26<-5716 Statuses=0009 0009 00:50:37 Msec=2250 True Az=41.025 Ze=94.26 Az status=0009 Ze status=0009 00:50:37 Check angles 00:50:37 SkyScan query 00:50:38 SkyScan query done: ret=0 az=40.98<-2732 ze=73.275<-7115 Statuses=0008 0009 00:50:38 Msec=3000 True Az=40.98 Ze=73.275 Az status=0008 Ze status=0009 00:50:38 Check angles 00:50:38 SkyScan query 00:50:39 SkyScan query done: ret=0 az=40.98<-2732 ze=52.785<-8481 Statuses=0008 0009 00:50:39 Msec=3750 True Az=40.98 Ze=52.785 Az status=0008 Ze status=0009 00:50:39 Check angles 00:50:39 SkyScan query 00:50:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:50:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:50:39 Message to Master queued w/err=0: serial=203988 error=0 00:50:44 Received message from Master: op=Filter serial=203989 00:50:44 Color wheel filter change from 0 to 0 00:50:44 FLIGetFilterPos err=0 currentPosition=0 00:50:44 FLIGetStepsRemaining err=0 RemainingSteps=0 00:50:44 Filter is already there-color wheel unchanged 00:50:45 Received message from Master: op=Shutter serial=203990 00:50:45 Shutter LASER close 00:50:45 Received message from Camera: op=State serial=203992 00:50:45 GetSingleValue result=40 Value=cccccccc 00:50:45 SkyScan query 00:50:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:50:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:45 Parameters OK 00:50:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:45 Set A/D data flow result=40 00:50:45 Set A/D channel type result=40 00:50:45 Set A/D encoding result=40 00:50:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:45 Set channel filter=0.000000e+000 result=40 00:50:45 Config A/D Result=40 00:50:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:45 Get A/D filter: -9.255963e+061 result=40 00:50:45 Get A/D value=-858993460 result=40 00:50:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:45 Parameters OK 00:50:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:45 Set A/D data flow result=40 00:50:45 Set A/D channel type result=40 00:50:45 Set A/D encoding result=40 00:50:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:45 Set channel filter=0.000000e+000 result=40 00:50:45 Config A/D Result=40 00:50:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:45 Get A/D filter: -9.255963e+061 result=40 00:50:45 Get A/D value=-858993460 result=40 00:50:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:50:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:50:45 Aux= 00:50:45 Message to Camera, serial 203992 queued 00:51:22 Received message from Master: op=PointingHead serial=204005 00:51:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:51:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:51:23 Point started: ret=0 00:51:23 point_skyscan result=0 00:51:23 Check angles 00:51:23 SkyScan query 00:51:24 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 00:51:24 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 00:51:24 Check angles 00:51:24 SkyScan query 00:51:25 SkyScan query done: ret=0 az=81.39<-5426 ze=66.495<-7567 Statuses=0009 0008 00:51:25 Msec=750 True Az=81.39 Ze=66.495 Az status=0009 Ze status=0008 00:51:25 Check angles 00:51:25 SkyScan query 00:51:25 SkyScan query done: ret=0 az=98.82<-6588 ze=66.495<-7567 Statuses=0009 0008 00:51:25 Msec=1500 True Az=98.82 Ze=66.495 Az status=0009 Ze status=0008 00:51:26 Check angles 00:51:26 SkyScan query 00:51:26 SkyScan query done: ret=0 az=116.265<-7751 ze=66.495<-7567 Statuses=0009 0008 00:51:26 Msec=2250 True Az=116.265 Ze=66.495 Az status=0009 Ze status=0008 00:51:26 Check angles 00:51:26 SkyScan query 00:51:27 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 00:51:27 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 00:51:27 Check angles 00:51:27 SkyScan query 00:51:28 SkyScan query done: ret=0 az=151.2<-10080 ze=66.495<-7567 Statuses=0009 0008 00:51:28 Msec=3750 True Az=151.2 Ze=66.495 Az status=0009 Ze status=0008 00:51:28 Check angles 00:51:28 SkyScan query 00:51:28 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:51:28 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:51:28 Message to Master queued w/err=0: serial=204005 error=0 00:51:33 Received message from Master: op=Filter serial=204006 00:51:33 Color wheel filter change from 0 to 0 00:51:33 FLIGetFilterPos err=0 currentPosition=0 00:51:33 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:33 Filter is already there-color wheel unchanged 00:51:34 Received message from Master: op=Shutter serial=204007 00:51:34 Shutter LASER close 00:51:34 Received message from Camera: op=State serial=204009 00:51:34 GetSingleValue result=40 Value=cccccccc 00:51:34 SkyScan query 00:51:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:51:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:34 Parameters OK 00:51:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:34 Set A/D data flow result=40 00:51:34 Set A/D channel type result=40 00:51:34 Set A/D encoding result=40 00:51:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:34 Set channel filter=0.000000e+000 result=40 00:51:34 Config A/D Result=40 00:51:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:34 Get A/D filter: -9.255963e+061 result=40 00:51:34 Get A/D value=-858993460 result=40 00:51:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:34 Parameters OK 00:51:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:34 Set A/D data flow result=40 00:51:34 Set A/D channel type result=40 00:51:34 Set A/D encoding result=40 00:51:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:34 Set channel filter=0.000000e+000 result=40 00:51:34 Config A/D Result=40 00:51:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:34 Get A/D filter: -9.255963e+061 result=40 00:51:34 Get A/D value=-858993460 result=40 00:51:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:34 Aux= 00:51:34 Message to Camera, serial 204009 queued 00:52:11 Received message from Master: op=PointingHead serial=204022 00:52:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:52:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:52:11 Point started: ret=0 00:52:11 point_skyscan result=0 00:52:12 Check angles 00:52:12 SkyScan query 00:52:13 SkyScan query done: ret=0 az=134.79<-8986 ze=36.555<-9563 Statuses=0009 0009 00:52:13 Msec=0 True Az=134.79 Ze=36.555 Az status=0009 Ze status=0009 00:52:13 Check angles 00:52:13 SkyScan query 00:52:13 SkyScan query done: ret=0 az=117.255<-7817 ze=15.645<-10957 Statuses=0009 0009 00:52:13 Msec=750 True Az=117.255 Ze=15.645 Az status=0009 Ze status=0009 00:52:14 Check angles 00:52:14 SkyScan query 00:52:14 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.835<-12389 Statuses=0009 0009 00:52:14 Msec=1500 True Az=99.66 Ze=-5.835 Az status=0009 Ze status=0009 00:52:14 Check angles 00:52:14 SkyScan query 00:52:15 SkyScan query done: ret=0 az=82.11<-5474 ze=-26.775<-13785 Statuses=0009 0009 00:52:15 Msec=2250 True Az=82.11 Ze=-26.775 Az status=0009 Ze status=0009 00:52:15 Check angles 00:52:15 SkyScan query 00:52:16 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.595<-14573 Statuses=0009 0008 00:52:16 Msec=3000 True Az=64.5 Ze=-38.595 Az status=0009 Ze status=0008 00:52:16 Check angles 00:52:16 SkyScan query 00:52:16 SkyScan query done: ret=0 az=46.89<-3126 ze=-38.52<-14568 Statuses=0009 0008 00:52:16 Msec=3750 True Az=46.89 Ze=-38.52 Az status=0009 Ze status=0008 00:52:17 Check angles 00:52:17 SkyScan query 00:52:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:52:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:52:17 Message to Master queued w/err=0: serial=204022 error=0 00:52:22 Received message from Master: op=Filter serial=204023 00:52:22 Color wheel filter change from 0 to 0 00:52:22 FLIGetFilterPos err=0 currentPosition=0 00:52:22 FLIGetStepsRemaining err=0 RemainingSteps=0 00:52:22 Filter is already there-color wheel unchanged 00:52:22 Received message from Master: op=Shutter serial=204024 00:52:22 Shutter LASER close 00:52:22 Received message from Camera: op=State serial=204026 00:52:22 GetSingleValue result=40 Value=cccccccc 00:52:22 SkyScan query 00:52:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:52:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:23 Parameters OK 00:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:23 Set A/D data flow result=40 00:52:23 Set A/D channel type result=40 00:52:23 Set A/D encoding result=40 00:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:23 Set channel filter=0.000000e+000 result=40 00:52:23 Config A/D Result=40 00:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:23 Get A/D filter: -9.255963e+061 result=40 00:52:23 Get A/D value=-858993460 result=40 00:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:23 Parameters OK 00:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:23 Set A/D data flow result=40 00:52:23 Set A/D channel type result=40 00:52:23 Set A/D encoding result=40 00:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:23 Set channel filter=0.000000e+000 result=40 00:52:23 Config A/D Result=40 00:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:23 Get A/D filter: -9.255963e+061 result=40 00:52:23 Get A/D value=-858993460 result=40 00:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:52:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:52:23 Aux= 00:52:23 Message to Camera, serial 204026 queued 00:53:00 Received message from Master: op=PointingHead serial=204039 00:53:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:53:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:53:00 Point started: ret=0 00:53:00 point_skyscan result=0 00:53:01 Check angles 00:53:01 SkyScan query 00:53:02 SkyScan query done: ret=0 az=64.14<-4276 ze=-68.49<-16566 Statuses=0009 0009 00:53:02 Msec=0 True Az=64.14 Ze=-68.49 Az status=0009 Ze status=0009 00:53:02 Check angles 00:53:02 SkyScan query 00:53:02 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.865<-17991 Statuses=0009 0009 00:53:02 Msec=750 True Az=82.08 Ze=-89.865 Az status=0009 Ze status=0009 00:53:02 Check angles 00:53:02 SkyScan query 00:53:03 SkyScan query done: ret=0 az=99.555<-6637 ze=-110.85<-19390 Statuses=0009 0009 00:53:03 Msec=1500 True Az=99.555 Ze=-110.85 Az status=0009 Ze status=0009 00:53:03 Check angles 00:53:03 SkyScan query 00:53:04 SkyScan query done: ret=0 az=117.285<-7819 ze=-132.15<-20810 Statuses=0009 0009 00:53:04 Msec=2250 True Az=117.285 Ze=-132.15 Az status=0009 Ze status=0009 00:53:04 Check angles 00:53:04 SkyScan query 00:53:05 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 00:53:05 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 00:53:05 Check angles 00:53:05 SkyScan query 00:53:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 00:53:05 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 00:53:05 Message to Master queued w/err=0: serial=204039 error=0 00:53:10 Received message from Master: op=Filter serial=204040 00:53:10 Color wheel filter change from 0 to 0 00:53:10 FLIGetFilterPos err=0 currentPosition=0 00:53:10 FLIGetStepsRemaining err=0 RemainingSteps=0 00:53:10 Filter is already there-color wheel unchanged 00:53:11 Received message from Master: op=Shutter serial=204041 00:53:11 Shutter LASER close 00:53:11 Received message from Camera: op=State serial=204043 00:53:11 GetSingleValue result=40 Value=cccccccc 00:53:11 SkyScan query 00:53:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:53:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:11 Parameters OK 00:53:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:11 Set A/D data flow result=40 00:53:11 Set A/D channel type result=40 00:53:11 Set A/D encoding result=40 00:53:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:11 Set channel filter=0.000000e+000 result=40 00:53:11 Config A/D Result=40 00:53:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:11 Get A/D filter: -9.255963e+061 result=40 00:53:11 Get A/D value=-858993460 result=40 00:53:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:11 Parameters OK 00:53:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:11 Set A/D data flow result=40 00:53:11 Set A/D channel type result=40 00:53:11 Set A/D encoding result=40 00:53:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:11 Set channel filter=0.000000e+000 result=40 00:53:11 Config A/D Result=40 00:53:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:11 Get A/D filter: -9.255963e+061 result=40 00:53:11 Get A/D value=-858993460 result=40 00:53:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:53:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:53:11 Aux= 00:53:11 Message to Camera, serial 204043 queued 00:53:48 Received message from Master: op=PointingHead serial=204056 00:53:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:53:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:53:48 Point started: ret=0 00:53:48 point_skyscan result=0 00:53:49 Check angles 00:53:49 SkyScan query 00:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0009 0009 00:53:50 Msec=0 True Az=112.995 Ze=-171.3 Az status=0009 Ze status=0009 00:53:50 Check angles 00:53:50 SkyScan query 00:53:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:53:51 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:53:51 Message to Master queued w/err=0: serial=204056 error=0 00:53:56 Received message from Master: op=Filter serial=204057 00:53:56 Color wheel filter change from 0 to 0 00:53:56 FLIGetFilterPos err=0 currentPosition=0 00:53:56 FLIGetStepsRemaining err=0 RemainingSteps=0 00:53:56 Filter is already there-color wheel unchanged 00:53:56 Received message from Master: op=Shutter serial=204058 00:53:56 Shutter LASER open 00:53:56 Received message from Camera: op=State serial=204060 00:53:56 GetSingleValue result=40 Value=cccccccc 00:53:56 SkyScan query 00:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:53:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:56 Parameters OK 00:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:56 Set A/D data flow result=40 00:53:56 Set A/D channel type result=40 00:53:56 Set A/D encoding result=40 00:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:56 Set channel filter=0.000000e+000 result=40 00:53:56 Config A/D Result=40 00:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:56 Get A/D filter: -9.255963e+061 result=40 00:53:56 Get A/D value=-858993460 result=40 00:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:53:56 Parameters OK 00:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:53:56 Set A/D data flow result=40 00:53:56 Set A/D channel type result=40 00:53:56 Set A/D encoding result=40 00:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:53:56 Set channel filter=0.000000e+000 result=40 00:53:56 Config A/D Result=40 00:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:53:56 Get A/D filter: -9.255963e+061 result=40 00:53:56 Get A/D value=-858993460 result=40 00:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:53:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:53:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:53:56 Aux= 00:53:56 Message to Camera, serial 204060 queued 00:54:05 Received message from Master: op=Shutter serial=204070 00:54:05 Shutter LASER close 00:54:05 Received message from Master: op=PointingHead serial=204074 00:54:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:54:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:54:06 Point started: ret=0 00:54:06 point_skyscan result=0 00:54:07 Check angles 00:54:07 SkyScan query 00:54:07 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.34<-21556 Statuses=0009 0009 00:54:07 Msec=0 True Az=135.93 Ze=-143.34 Az status=0009 Ze status=0009 00:54:07 Check angles 00:54:07 SkyScan query 00:54:08 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.385<-20159 Statuses=0009 0009 00:54:08 Msec=750 True Az=153.51 Ze=-122.385 Az status=0009 Ze status=0009 00:54:08 Check angles 00:54:08 SkyScan query 00:54:09 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.46<-18764 Statuses=0009 0009 00:54:09 Msec=1500 True Az=170.895 Ze=-101.46 Az status=0009 Ze status=0009 00:54:09 Check angles 00:54:09 SkyScan query 00:54:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.49<-17366 Statuses=0008 0009 00:54:09 Msec=2250 True Az=175.995 Ze=-80.49 Az status=0008 Ze status=0009 00:54:10 Check angles 00:54:10 SkyScan query 00:54:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.49<-15966 Statuses=0008 0009 00:54:10 Msec=3000 True Az=175.995 Ze=-59.49 Az status=0008 Ze status=0009 00:54:10 Check angles 00:54:10 SkyScan query 00:54:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:54:11 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:54:11 Message to Master queued w/err=0: serial=204074 error=0 00:54:16 Received message from Master: op=Filter serial=204075 00:54:16 Color wheel filter change from 0 to 0 00:54:16 FLIGetFilterPos err=0 currentPosition=0 00:54:16 FLIGetStepsRemaining err=0 RemainingSteps=0 00:54:16 Filter is already there-color wheel unchanged 00:54:16 Received message from Master: op=Shutter serial=204076 00:54:16 Shutter LASER close 00:54:16 Received message from Camera: op=State serial=204078 00:54:16 GetSingleValue result=40 Value=cccccccc 00:54:16 SkyScan query 00:54:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:54:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:17 Parameters OK 00:54:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:17 Set A/D data flow result=40 00:54:17 Set A/D channel type result=40 00:54:17 Set A/D encoding result=40 00:54:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:17 Set channel filter=0.000000e+000 result=40 00:54:17 Config A/D Result=40 00:54:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:17 Get A/D filter: -9.255963e+061 result=40 00:54:17 Get A/D value=-858993460 result=40 00:54:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:54:17 Parameters OK 00:54:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:54:17 Set A/D data flow result=40 00:54:17 Set A/D channel type result=40 00:54:17 Set A/D encoding result=40 00:54:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:54:17 Set channel filter=0.000000e+000 result=40 00:54:17 Config A/D Result=40 00:54:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:54:17 Get A/D filter: -9.255963e+061 result=40 00:54:17 Get A/D value=-858993460 result=40 00:54:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:54:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:54:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:54:17 Aux= 00:54:17 Message to Camera, serial 204078 queued 00:54:54 Received message from Master: op=PointingHead serial=204091 00:54:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:54:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:54:54 Point started: ret=0 00:54:54 point_skyscan result=0 00:54:55 Check angles 00:54:55 SkyScan query 00:54:55 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.54<-13436 Statuses=0009 0009 00:54:55 Msec=0 True Az=152.79 Ze=-21.54 Az status=0009 Ze status=0009 00:54:55 Check angles 00:54:55 SkyScan query 00:54:56 SkyScan query done: ret=0 az=135.015<-9001 ze=-0.135<-12009 Statuses=0009 0009 00:54:56 Msec=750 True Az=135.015 Ze=-0.135 Az status=0009 Ze status=0009 00:54:56 Check angles 00:54:56 SkyScan query 00:54:57 SkyScan query done: ret=0 az=117.51<-7834 ze=20.82<-10612 Statuses=0009 0009 00:54:57 Msec=1500 True Az=117.51 Ze=20.82 Az status=0009 Ze status=0009 00:54:57 Check angles 00:54:57 SkyScan query 00:54:58 SkyScan query done: ret=0 az=100.14<-6676 ze=41.76<-9216 Statuses=0009 0009 00:54:58 Msec=2250 True Az=100.14 Ze=41.76 Az status=0009 Ze status=0009 00:54:58 Check angles 00:54:58 SkyScan query 00:54:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 00:54:58 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 00:54:59 Check angles 00:54:59 SkyScan query 00:54:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:54:59 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 00:54:59 Message to Master queued w/err=0: serial=204091 error=0 00:55:04 Received message from Master: op=Filter serial=204092 00:55:04 Color wheel filter change from 0 to 0 00:55:04 FLIGetFilterPos err=0 currentPosition=0 00:55:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:55:04 Filter is already there-color wheel unchanged 00:55:04 Received message from Master: op=Shutter serial=204093 00:55:04 Shutter LASER close 00:55:04 Received message from Camera: op=State serial=204095 00:55:04 GetSingleValue result=40 Value=cccccccc 00:55:04 SkyScan query 00:55:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:55:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:05 Parameters OK 00:55:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:05 Set A/D data flow result=40 00:55:05 Set A/D channel type result=40 00:55:05 Set A/D encoding result=40 00:55:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:05 Set channel filter=0.000000e+000 result=40 00:55:05 Config A/D Result=40 00:55:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:05 Get A/D filter: -9.255963e+061 result=40 00:55:05 Get A/D value=-858993460 result=40 00:55:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:05 Parameters OK 00:55:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:05 Set A/D data flow result=40 00:55:05 Set A/D channel type result=40 00:55:05 Set A/D encoding result=40 00:55:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:05 Set channel filter=0.000000e+000 result=40 00:55:05 Config A/D Result=40 00:55:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:05 Get A/D filter: -9.255963e+061 result=40 00:55:05 Get A/D value=-858993460 result=40 00:55:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:55:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:55:05 Aux= 00:55:05 Message to Camera, serial 204095 queued 00:55:42 Received message from Master: op=PointingHead serial=204108 00:55:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:55:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:55:42 Point started: ret=0 00:55:42 point_skyscan result=0 00:55:43 Check angles 00:55:43 SkyScan query 00:55:43 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 00:55:43 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 [UTC 2018-12-17 00:55:44] 00:55:44 Check angles 00:55:44 SkyScan query 00:55:44 SkyScan query done: ret=0 az=127.59<-8506 ze=38.505<-9433 Statuses=0009 0008 00:55:44 Msec=750 True Az=127.59 Ze=38.505 Az status=0009 Ze status=0008 00:55:44 Check angles 00:55:44 SkyScan query 00:55:45 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 00:55:45 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 00:55:45 Check angles 00:55:45 SkyScan query 00:55:46 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 00:55:46 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 00:55:46 Check angles 00:55:46 SkyScan query 00:55:46 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:55:46 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:55:47 Check angles 00:55:47 SkyScan query 00:55:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:55:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:55:47 Message to Master queued w/err=0: serial=204108 error=0 00:55:52 Received message from Master: op=Filter serial=204109 00:55:52 Color wheel filter change from 0 to 0 00:55:52 FLIGetFilterPos err=0 currentPosition=0 00:55:52 FLIGetStepsRemaining err=0 RemainingSteps=0 00:55:52 Filter is already there-color wheel unchanged [UTC 2018-12-17 00:55:52] 00:55:52 Received message from Master: op=Shutter serial=204110 00:55:52 Shutter LASER close 00:55:52 Received message from Camera: op=State serial=204112 00:55:52 GetSingleValue result=40 Value=cccccccc 00:55:52 SkyScan query 00:55:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:55:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:53 Parameters OK 00:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:53 Set A/D data flow result=40 00:55:53 Set A/D channel type result=40 00:55:53 Set A/D encoding result=40 00:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:53 Set channel filter=0.000000e+000 result=40 00:55:53 Config A/D Result=40 00:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:53 Get A/D filter: -9.255963e+061 result=40 00:55:53 Get A/D value=-858993460 result=40 00:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:55:53 Parameters OK 00:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:55:53 Set A/D data flow result=40 00:55:53 Set A/D channel type result=40 00:55:53 Set A/D encoding result=40 00:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:55:53 Set channel filter=0.000000e+000 result=40 00:55:53 Config A/D Result=40 00:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:55:53 Get A/D filter: -9.255963e+061 result=40 00:55:53 Get A/D value=-858993460 result=40 00:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:55:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:55:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:55:53 Aux= 00:55:53 Message to Camera, serial 204112 queued 00:56:30 Received message from Master: op=PointingHead serial=204125 00:56:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:56:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:56:30 Point started: ret=0 00:56:30 point_skyscan result=0 00:56:31 Check angles 00:56:31 SkyScan query 00:56:32 SkyScan query done: ret=0 az=152.895<-10193 ze=8.55<-11430 Statuses=0009 0009 00:56:32 Msec=0 True Az=152.895 Ze=8.55 Az status=0009 Ze status=0009 00:56:32 Check angles 00:56:32 SkyScan query 00:56:32 SkyScan query done: ret=0 az=135<-9000 ze=-12.81<-12854 Statuses=0009 0009 00:56:32 Msec=750 True Az=135 Ze=-12.81 Az status=0009 Ze status=0009 00:56:32 Check angles 00:56:32 SkyScan query 00:56:33 SkyScan query done: ret=0 az=117.495<-7833 ze=-33.855<-14257 Statuses=0009 0009 00:56:33 Msec=1500 True Az=117.495 Ze=-33.855 Az status=0009 Ze status=0009 00:56:33 Check angles 00:56:33 SkyScan query 00:56:34 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.57<-15438 Statuses=0009 0009 00:56:34 Msec=2250 True Az=100.125 Ze=-51.57 Az status=0009 Ze status=0009 00:56:34 Check angles 00:56:34 SkyScan query 00:56:35 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 00:56:35 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 00:56:35 Check angles 00:56:35 SkyScan query 00:56:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:56:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:56:35 Message to Master queued w/err=0: serial=204125 error=0 00:56:40 Received message from Master: op=Filter serial=204126 00:56:40 Color wheel filter change from 0 to 0 00:56:40 FLIGetFilterPos err=0 currentPosition=0 00:56:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:56:40 Filter is already there-color wheel unchanged 00:56:41 Received message from Master: op=Shutter serial=204127 00:56:41 Shutter LASER close 00:56:41 Received message from Camera: op=State serial=204129 00:56:41 GetSingleValue result=40 Value=cccccccc 00:56:41 SkyScan query 00:56:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:56:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:41 Parameters OK 00:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:41 Set A/D data flow result=40 00:56:41 Set A/D channel type result=40 00:56:41 Set A/D encoding result=40 00:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:41 Set channel filter=0.000000e+000 result=40 00:56:41 Config A/D Result=40 00:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:41 Get A/D filter: -9.255963e+061 result=40 00:56:41 Get A/D value=-858993460 result=40 00:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:56:41 Parameters OK 00:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:56:41 Set A/D data flow result=40 00:56:41 Set A/D channel type result=40 00:56:41 Set A/D encoding result=40 00:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:56:41 Set channel filter=0.000000e+000 result=40 00:56:41 Config A/D Result=40 00:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:56:41 Get A/D filter: -9.255963e+061 result=40 00:56:41 Get A/D value=-858993460 result=40 00:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:56:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:56:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:56:41 Aux= 00:56:41 Message to Camera, serial 204129 queued 00:57:18 Received message from Master: op=PointingHead serial=204142 00:57:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:57:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:57:18 Point started: ret=0 00:57:18 point_skyscan result=0 00:57:19 Check angles 00:57:19 SkyScan query 00:57:20 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.15<-17410 Statuses=0009 0009 00:57:20 Msec=0 True Az=108.87 Ze=-81.15 Az status=0009 Ze status=0009 00:57:20 Check angles 00:57:20 SkyScan query 00:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.135<-18809 Statuses=0008 0009 00:57:20 Msec=750 True Az=112.995 Ze=-102.135 Az status=0008 Ze status=0009 00:57:21 Check angles 00:57:21 SkyScan query 00:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 00:57:21 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 00:57:21 Check angles 00:57:21 SkyScan query 00:57:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.015<-21601 Statuses=0008 0009 00:57:22 Msec=2250 True Az=112.995 Ze=-144.015 Az status=0008 Ze status=0009 00:57:22 Check angles 00:57:22 SkyScan query 00:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 00:57:23 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 00:57:23 Check angles 00:57:23 SkyScan query 00:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 00:57:23 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 00:57:23 Message to Master queued w/err=0: serial=204142 error=0 00:57:28 Received message from Master: op=Filter serial=204143 00:57:28 Color wheel filter change from 0 to 0 00:57:28 FLIGetFilterPos err=0 currentPosition=0 00:57:28 FLIGetStepsRemaining err=0 RemainingSteps=0 00:57:28 Filter is already there-color wheel unchanged 00:57:29 Received message from Master: op=Shutter serial=204144 00:57:29 Shutter LASER open 00:57:29 Received message from Camera: op=State serial=204146 00:57:29 GetSingleValue result=40 Value=cccccccc 00:57:29 SkyScan query 00:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:57:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:29 Parameters OK 00:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:29 Set A/D data flow result=40 00:57:29 Set A/D channel type result=40 00:57:29 Set A/D encoding result=40 00:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:29 Set channel filter=0.000000e+000 result=40 00:57:29 Config A/D Result=40 00:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:29 Get A/D filter: -9.255963e+061 result=40 00:57:29 Get A/D value=-858993460 result=40 00:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:29 Parameters OK 00:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:29 Set A/D data flow result=40 00:57:29 Set A/D channel type result=40 00:57:29 Set A/D encoding result=40 00:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:29 Set channel filter=0.000000e+000 result=40 00:57:29 Config A/D Result=40 00:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:29 Get A/D filter: -9.255963e+061 result=40 00:57:29 Get A/D value=-858993460 result=40 00:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:57:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:57:29 Aux= 00:57:29 Message to Camera, serial 204146 queued 00:57:38 Received message from Master: op=Shutter serial=204156 00:57:38 Shutter LASER close 00:57:38 Received message from Master: op=PointingHead serial=204160 00:57:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:57:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:57:39 Point started: ret=0 00:57:39 point_skyscan result=0 00:57:39 Check angles 00:57:39 SkyScan query 00:57:40 SkyScan query done: ret=0 az=89.835<-5989 ze=157.215<-1519 Statuses=0009 0009 00:57:40 Msec=0 True Az=89.835 Ze=157.215 Az status=0009 Ze status=0009 00:57:40 Check angles 00:57:40 SkyScan query 00:57:41 SkyScan query done: ret=0 az=72.42<-4828 ze=136.245<-2917 Statuses=0009 0009 00:57:41 Msec=750 True Az=72.42 Ze=136.245 Az status=0009 Ze status=0009 00:57:41 Check angles 00:57:41 SkyScan query 00:57:41 SkyScan query done: ret=0 az=54.645<-3643 ze=114.84<-4344 Statuses=0009 0009 00:57:41 Msec=1500 True Az=54.645 Ze=114.84 Az status=0009 Ze status=0009 00:57:42 Check angles 00:57:42 SkyScan query 00:57:42 SkyScan query done: ret=0 az=40.995<-2733 ze=93.885<-5741 Statuses=0009 0009 00:57:42 Msec=2250 True Az=40.995 Ze=93.885 Az status=0009 Ze status=0009 00:57:42 Check angles 00:57:42 SkyScan query 00:57:43 SkyScan query done: ret=0 az=40.98<-2732 ze=72.9<-7140 Statuses=0008 0009 00:57:43 Msec=3000 True Az=40.98 Ze=72.9 Az status=0008 Ze status=0009 00:57:43 Check angles 00:57:43 SkyScan query 00:57:44 SkyScan query done: ret=0 az=40.98<-2732 ze=52.53<-8498 Statuses=0008 0009 00:57:44 Msec=3750 True Az=40.98 Ze=52.53 Az status=0008 Ze status=0009 00:57:44 Check angles 00:57:44 SkyScan query 00:57:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:57:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:57:44 Message to Master queued w/err=0: serial=204160 error=0 00:57:49 Received message from Master: op=Filter serial=204161 00:57:49 Color wheel filter change from 0 to 0 00:57:49 FLIGetFilterPos err=0 currentPosition=0 00:57:49 FLIGetStepsRemaining err=0 RemainingSteps=0 00:57:49 Filter is already there-color wheel unchanged 00:57:50 Received message from Master: op=Shutter serial=204162 00:57:50 Shutter LASER close 00:57:50 Received message from Camera: op=State serial=204164 00:57:50 GetSingleValue result=40 Value=cccccccc 00:57:50 SkyScan query 00:57:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:57:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:50 Parameters OK 00:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:50 Set A/D data flow result=40 00:57:50 Set A/D channel type result=40 00:57:50 Set A/D encoding result=40 00:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:50 Set channel filter=0.000000e+000 result=40 00:57:50 Config A/D Result=40 00:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:50 Get A/D filter: -9.255963e+061 result=40 00:57:50 Get A/D value=-858993460 result=40 00:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:57:50 Parameters OK 00:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:57:50 Set A/D data flow result=40 00:57:50 Set A/D channel type result=40 00:57:50 Set A/D encoding result=40 00:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:57:50 Set channel filter=0.000000e+000 result=40 00:57:50 Config A/D Result=40 00:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:57:50 Get A/D filter: -9.255963e+061 result=40 00:57:50 Get A/D value=-858993460 result=40 00:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:57:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:57:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:57:50 Aux= 00:57:50 Message to Camera, serial 204164 queued 00:58:26 Received message from Master: op=PointingHead serial=204176 00:58:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:58:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:58:27 Point started: ret=0 00:58:27 point_skyscan result=0 00:58:27 Check angles 00:58:27 SkyScan query 00:58:28 SkyScan query done: ret=0 az=64.365<-4291 ze=66.555<-7563 Statuses=0009 0008 00:58:28 Msec=0 True Az=64.365 Ze=66.555 Az status=0009 Ze status=0008 00:58:28 Check angles 00:58:28 SkyScan query 00:58:29 SkyScan query done: ret=0 az=81.9<-5460 ze=66.495<-7567 Statuses=0009 0008 00:58:29 Msec=750 True Az=81.9 Ze=66.495 Az status=0009 Ze status=0008 00:58:29 Check angles 00:58:29 SkyScan query 00:58:29 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 00:58:29 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 00:58:30 Check angles 00:58:30 SkyScan query 00:58:30 SkyScan query done: ret=0 az=117.255<-7817 ze=66.495<-7567 Statuses=0009 0008 00:58:30 Msec=2250 True Az=117.255 Ze=66.495 Az status=0009 Ze status=0008 00:58:30 Check angles 00:58:30 SkyScan query 00:58:31 SkyScan query done: ret=0 az=135.06<-9004 ze=66.495<-7567 Statuses=0009 0008 00:58:31 Msec=3000 True Az=135.06 Ze=66.495 Az status=0009 Ze status=0008 00:58:31 Check angles 00:58:31 SkyScan query 00:58:32 SkyScan query done: ret=0 az=152.43<-10162 ze=66.495<-7567 Statuses=0009 0008 00:58:32 Msec=3750 True Az=152.43 Ze=66.495 Az status=0009 Ze status=0008 00:58:32 Check angles 00:58:32 SkyScan query 00:58:32 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:58:32 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:58:32 Message to Master queued w/err=0: serial=204176 error=0 00:58:37 Received message from Master: op=Filter serial=204177 00:58:37 Color wheel filter change from 0 to 0 00:58:37 FLIGetFilterPos err=0 currentPosition=0 00:58:37 FLIGetStepsRemaining err=0 RemainingSteps=0 00:58:37 Filter is already there-color wheel unchanged 00:58:38 Received message from Master: op=Shutter serial=204178 00:58:38 Shutter LASER close 00:58:38 Received message from Camera: op=State serial=204180 00:58:38 GetSingleValue result=40 Value=cccccccc 00:58:38 SkyScan query 00:58:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:58:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:38 Parameters OK 00:58:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:38 Set A/D data flow result=40 00:58:38 Set A/D channel type result=40 00:58:38 Set A/D encoding result=40 00:58:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:38 Set channel filter=0.000000e+000 result=40 00:58:38 Config A/D Result=40 00:58:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:38 Get A/D filter: -9.255963e+061 result=40 00:58:38 Get A/D value=-858993460 result=40 00:58:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:58:38 Parameters OK 00:58:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:58:38 Set A/D data flow result=40 00:58:38 Set A/D channel type result=40 00:58:38 Set A/D encoding result=40 00:58:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:58:38 Set channel filter=0.000000e+000 result=40 00:58:38 Config A/D Result=40 00:58:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:58:38 Get A/D filter: -9.255963e+061 result=40 00:58:38 Get A/D value=-858993460 result=40 00:58:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:58:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:58:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:58:38 Aux= 00:58:38 Message to Camera, serial 204180 queued 00:59:15 Received message from Master: op=PointingHead serial=204193 00:59:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:59:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:59:15 Point started: ret=0 00:59:15 point_skyscan result=0 00:59:16 Check angles 00:59:16 SkyScan query 00:59:17 SkyScan query done: ret=0 az=134.745<-8983 ze=36.63<-9558 Statuses=0009 0009 00:59:17 Msec=0 True Az=134.745 Ze=36.63 Az status=0009 Ze status=0009 00:59:17 Check angles 00:59:17 SkyScan query 00:59:18 SkyScan query done: ret=0 az=117.24<-7816 ze=15.705<-10953 Statuses=0009 0009 00:59:18 Msec=750 True Az=117.24 Ze=15.705 Az status=0009 Ze status=0009 00:59:18 Check angles 00:59:18 SkyScan query 00:59:18 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.28<-12352 Statuses=0009 0009 00:59:18 Msec=1500 True Az=99.93 Ze=-5.28 Az status=0009 Ze status=0009 00:59:18 Check angles 00:59:18 SkyScan query 00:59:19 SkyScan query done: ret=0 az=82.395<-5493 ze=-26.22<-13748 Statuses=0009 0009 00:59:19 Msec=2250 True Az=82.395 Ze=-26.22 Az status=0009 Ze status=0009 00:59:19 Check angles 00:59:19 SkyScan query 00:59:20 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.595<-14573 Statuses=0009 0008 00:59:20 Msec=3000 True Az=64.815 Ze=-38.595 Az status=0009 Ze status=0008 00:59:20 Check angles 00:59:20 SkyScan query 00:59:21 SkyScan query done: ret=0 az=47.4<-3160 ze=-38.52<-14568 Statuses=0009 0008 00:59:21 Msec=3750 True Az=47.4 Ze=-38.52 Az status=0009 Ze status=0008 00:59:21 Check angles 00:59:21 SkyScan query 00:59:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:59:21 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:59:21 Message to Master queued w/err=0: serial=204193 error=0 00:59:26 Received message from Master: op=Filter serial=204194 00:59:26 Color wheel filter change from 0 to 0 00:59:26 FLIGetFilterPos err=0 currentPosition=0 00:59:26 FLIGetStepsRemaining err=0 RemainingSteps=0 00:59:26 Filter is already there-color wheel unchanged 00:59:26 Received message from Master: op=Shutter serial=204195 00:59:26 Shutter LASER close 00:59:27 Received message from Camera: op=State serial=204197 00:59:27 GetSingleValue result=40 Value=cccccccc 00:59:27 SkyScan query 00:59:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:59:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:27 Parameters OK 00:59:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:27 Set A/D data flow result=40 00:59:27 Set A/D channel type result=40 00:59:27 Set A/D encoding result=40 00:59:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:27 Set channel filter=0.000000e+000 result=40 00:59:27 Config A/D Result=40 00:59:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:27 Get A/D filter: -9.255963e+061 result=40 00:59:27 Get A/D value=-858993460 result=40 00:59:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:59:27 Parameters OK 00:59:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:59:27 Set A/D data flow result=40 00:59:27 Set A/D channel type result=40 00:59:27 Set A/D encoding result=40 00:59:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:59:27 Set channel filter=0.000000e+000 result=40 00:59:27 Config A/D Result=40 00:59:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:59:27 Get A/D filter: -9.255963e+061 result=40 00:59:27 Get A/D value=-858993460 result=40 00:59:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:59:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:59:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:59:27 Aux= 00:59:27 Message to Camera, serial 204197 queued 01:00:04 Received message from Master: op=PointingHead serial=204210 01:00:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:00:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:00:04 Point started: ret=0 01:00:04 point_skyscan result=0 01:00:05 Check angles 01:00:05 SkyScan query 01:00:06 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.295<-16553 Statuses=0009 0009 01:00:06 Msec=0 True Az=63.915 Ze=-68.295 Az status=0009 Ze status=0009 01:00:06 Check angles 01:00:06 SkyScan query 01:00:06 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.295<-17953 Statuses=0009 0009 01:00:06 Msec=750 True Az=81.345 Ze=-89.295 Az status=0009 Ze status=0009 01:00:07 Check angles 01:00:07 SkyScan query 01:00:07 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.19<-19346 Statuses=0009 0009 01:00:07 Msec=1500 True Az=98.925 Ze=-110.19 Az status=0009 Ze status=0009 01:00:07 Check angles 01:00:07 SkyScan query 01:00:08 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.16<-20744 Statuses=0009 0009 01:00:08 Msec=2250 True Az=116.46 Ze=-131.16 Az status=0009 Ze status=0009 01:00:08 Check angles 01:00:08 SkyScan query 01:00:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 01:00:09 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 01:00:09 Check angles 01:00:09 SkyScan query 01:00:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 01:00:09 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 01:00:09 Message to Master queued w/err=0: serial=204210 error=0 01:00:14 Received message from Master: op=Filter serial=204211 01:00:14 Color wheel filter change from 0 to 0 01:00:14 FLIGetFilterPos err=0 currentPosition=0 01:00:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:00:14 Filter is already there-color wheel unchanged 01:00:15 Received message from Master: op=Shutter serial=204212 01:00:15 Shutter LASER close 01:00:15 Received message from Camera: op=State serial=204214 01:00:15 GetSingleValue result=40 Value=cccccccc 01:00:15 SkyScan query 01:00:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:00:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:15 Parameters OK 01:00:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:15 Set A/D data flow result=40 01:00:15 Set A/D channel type result=40 01:00:15 Set A/D encoding result=40 01:00:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:15 Set channel filter=0.000000e+000 result=40 01:00:15 Config A/D Result=40 01:00:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:15 Get A/D filter: -9.255963e+061 result=40 01:00:15 Get A/D value=-858993460 result=40 01:00:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:00:15 Parameters OK 01:00:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:00:15 Set A/D data flow result=40 01:00:15 Set A/D channel type result=40 01:00:15 Set A/D encoding result=40 01:00:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:00:15 Set channel filter=0.000000e+000 result=40 01:00:15 Config A/D Result=40 01:00:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:00:15 Get A/D filter: -9.255963e+061 result=40 01:00:15 Get A/D value=-858993460 result=40 01:00:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:00:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:00:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:00:15 Aux= 01:00:15 Message to Camera, serial 204214 queued 01:00:52 Received message from Master: op=PointingHead serial=204227 01:00:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:00:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:00:52 Point started: ret=0 01:00:52 point_skyscan result=0 01:00:53 Check angles 01:00:53 SkyScan query 01:00:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 01:00:54 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 01:00:54 Check angles 01:00:54 SkyScan query 01:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:00:54 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:00:54 Message to Master queued w/err=0: serial=204227 error=0 01:00:59 Received message from Master: op=Filter serial=204228 01:00:59 Color wheel filter change from 0 to 0 01:00:59 FLIGetFilterPos err=0 currentPosition=0 01:00:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:00:59 Filter is already there-color wheel unchanged 01:01:00 Received message from Master: op=Shutter serial=204229 01:01:00 Shutter LASER open 01:01:00 Received message from Camera: op=State serial=204231 01:01:00 GetSingleValue result=40 Value=cccccccc 01:01:00 SkyScan query 01:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:01:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:00 Parameters OK 01:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:00 Set A/D data flow result=40 01:01:00 Set A/D channel type result=40 01:01:00 Set A/D encoding result=40 01:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:00 Set channel filter=0.000000e+000 result=40 01:01:00 Config A/D Result=40 01:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:00 Get A/D filter: -9.255963e+061 result=40 01:01:00 Get A/D value=-858993460 result=40 01:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:00 Parameters OK 01:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:00 Set A/D data flow result=40 01:01:00 Set A/D channel type result=40 01:01:00 Set A/D encoding result=40 01:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:00 Set channel filter=0.000000e+000 result=40 01:01:00 Config A/D Result=40 01:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:00 Get A/D filter: -9.255963e+061 result=40 01:01:00 Get A/D value=-858993460 result=40 01:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:01:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:01:00 Aux= 01:01:00 Message to Camera, serial 204231 queued 01:01:09 Received message from Master: op=Shutter serial=204241 01:01:09 Shutter LASER close 01:01:09 Received message from Master: op=PointingHead serial=204245 01:01:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:01:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:01:10 Point started: ret=0 01:01:10 point_skyscan result=0 01:01:10 Check angles 01:01:10 SkyScan query 01:01:11 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.205<-21547 Statuses=0009 0009 01:01:11 Msec=0 True Az=135.99 Ze=-143.205 Az status=0009 Ze status=0009 01:01:11 Check angles 01:01:11 SkyScan query 01:01:12 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.235<-20149 Statuses=0009 0009 01:01:12 Msec=750 True Az=153.495 Ze=-122.235 Az status=0009 Ze status=0009 01:01:12 Check angles 01:01:12 SkyScan query 01:01:13 SkyScan query done: ret=0 az=171.03<-11402 ze=-101.295<-18753 Statuses=0009 0009 01:01:13 Msec=1500 True Az=171.03 Ze=-101.295 Az status=0009 Ze status=0009 01:01:13 Check angles 01:01:13 SkyScan query 01:01:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.355<-17357 Statuses=0008 0009 01:01:13 Msec=2250 True Az=175.995 Ze=-80.355 Az status=0008 Ze status=0009 01:01:13 Check angles 01:01:13 SkyScan query 01:01:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.89<-15926 Statuses=0008 0009 01:01:14 Msec=3000 True Az=175.995 Ze=-58.89 Az status=0008 Ze status=0009 01:01:14 Check angles 01:01:14 SkyScan query 01:01:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:01:15 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:01:15 Message to Master queued w/err=0: serial=204245 error=0 01:01:20 Received message from Master: op=Filter serial=204246 01:01:20 Color wheel filter change from 0 to 0 01:01:20 FLIGetFilterPos err=0 currentPosition=0 01:01:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:01:20 Filter is already there-color wheel unchanged 01:01:20 Received message from Master: op=Shutter serial=204247 01:01:20 Shutter LASER close 01:01:20 Received message from Camera: op=State serial=204249 01:01:20 GetSingleValue result=40 Value=cccccccc 01:01:20 SkyScan query 01:01:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:01:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:21 Parameters OK 01:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:21 Set A/D data flow result=40 01:01:21 Set A/D channel type result=40 01:01:21 Set A/D encoding result=40 01:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:21 Set channel filter=0.000000e+000 result=40 01:01:21 Config A/D Result=40 01:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:21 Get A/D filter: -9.255963e+061 result=40 01:01:21 Get A/D value=-858993460 result=40 01:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:01:21 Parameters OK 01:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:01:21 Set A/D data flow result=40 01:01:21 Set A/D channel type result=40 01:01:21 Set A/D encoding result=40 01:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:01:21 Set channel filter=0.000000e+000 result=40 01:01:21 Config A/D Result=40 01:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:01:21 Get A/D filter: -9.255963e+061 result=40 01:01:21 Get A/D value=-858993460 result=40 01:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:01:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:01:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:01:21 Aux= 01:01:21 Message to Camera, serial 204249 queued 01:01:58 Received message from Master: op=PointingHead serial=204262 01:01:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:01:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:01:58 Point started: ret=0 01:01:58 point_skyscan result=0 01:01:59 Check angles 01:01:59 SkyScan query 01:01:59 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.645<-13443 Statuses=0009 0009 01:01:59 Msec=0 True Az=152.925 Ze=-21.645 Az status=0009 Ze status=0009 01:01:59 Check angles 01:01:59 SkyScan query 01:02:00 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.66<-12044 Statuses=0009 0009 01:02:00 Msec=750 True Az=135.435 Ze=-0.66 Az status=0009 Ze status=0009 01:02:00 Check angles 01:02:00 SkyScan query 01:02:01 SkyScan query done: ret=0 az=117.45<-7830 ze=20.745<-10617 Statuses=0009 0009 01:02:01 Msec=1500 True Az=117.45 Ze=20.745 Az status=0009 Ze status=0009 01:02:01 Check angles 01:02:01 SkyScan query 01:02:02 SkyScan query done: ret=0 az=100.215<-6681 ze=41.67<-9222 Statuses=0009 0009 01:02:02 Msec=2250 True Az=100.215 Ze=41.67 Az status=0009 Ze status=0009 01:02:02 Check angles 01:02:02 SkyScan query 01:02:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 01:02:02 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 01:02:02 Check angles 01:02:02 SkyScan query 01:02:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:02:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:02:03 Message to Master queued w/err=0: serial=204262 error=0 01:02:08 Received message from Master: op=Filter serial=204263 01:02:08 Color wheel filter change from 0 to 0 01:02:08 FLIGetFilterPos err=0 currentPosition=0 01:02:08 FLIGetStepsRemaining err=0 RemainingSteps=0 01:02:08 Filter is already there-color wheel unchanged 01:02:08 Received message from Master: op=Shutter serial=204264 01:02:08 Shutter LASER close 01:02:08 Received message from Camera: op=State serial=204266 01:02:08 GetSingleValue result=40 Value=cccccccc 01:02:08 SkyScan query 01:02:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:02:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:09 Parameters OK 01:02:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:09 Set A/D data flow result=40 01:02:09 Set A/D channel type result=40 01:02:09 Set A/D encoding result=40 01:02:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:09 Set channel filter=0.000000e+000 result=40 01:02:09 Config A/D Result=40 01:02:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:09 Get A/D filter: -9.255963e+061 result=40 01:02:09 Get A/D value=-858993460 result=40 01:02:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:09 Parameters OK 01:02:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:09 Set A/D data flow result=40 01:02:09 Set A/D channel type result=40 01:02:09 Set A/D encoding result=40 01:02:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:09 Set channel filter=0.000000e+000 result=40 01:02:09 Config A/D Result=40 01:02:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:09 Get A/D filter: -9.255963e+061 result=40 01:02:09 Get A/D value=-858993460 result=40 01:02:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:02:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:02:09 Aux= 01:02:09 Message to Camera, serial 204266 queued 01:02:46 Received message from Master: op=PointingHead serial=204279 01:02:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:02:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:02:46 Point started: ret=0 01:02:46 point_skyscan result=0 01:02:47 Check angles 01:02:47 SkyScan query 01:02:47 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 01:02:47 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 01:02:48 Check angles 01:02:48 SkyScan query 01:02:48 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 01:02:48 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 01:02:48 Check angles 01:02:48 SkyScan query 01:02:49 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 01:02:49 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 01:02:49 Check angles 01:02:49 SkyScan query 01:02:50 SkyScan query done: ret=0 az=161.895<-10793 ze=38.505<-9433 Statuses=0009 0008 01:02:50 Msec=2250 True Az=161.895 Ze=38.505 Az status=0009 Ze status=0008 01:02:50 Check angles 01:02:50 SkyScan query 01:02:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 01:02:50 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 01:02:51 Check angles 01:02:51 SkyScan query 01:02:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:02:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:02:51 Message to Master queued w/err=0: serial=204279 error=0 01:02:56 Received message from Master: op=Filter serial=204280 01:02:56 Color wheel filter change from 0 to 0 01:02:56 FLIGetFilterPos err=0 currentPosition=0 01:02:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:02:56 Filter is already there-color wheel unchanged 01:02:56 Received message from Master: op=Shutter serial=204281 01:02:56 Shutter LASER close 01:02:56 Received message from Camera: op=State serial=204283 01:02:56 GetSingleValue result=40 Value=cccccccc 01:02:56 SkyScan query 01:02:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:02:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:57 Parameters OK 01:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:57 Set A/D data flow result=40 01:02:57 Set A/D channel type result=40 01:02:57 Set A/D encoding result=40 01:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:57 Set channel filter=0.000000e+000 result=40 01:02:57 Config A/D Result=40 01:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:57 Get A/D filter: -9.255963e+061 result=40 01:02:57 Get A/D value=-858993460 result=40 01:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:02:57 Parameters OK 01:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:02:57 Set A/D data flow result=40 01:02:57 Set A/D channel type result=40 01:02:57 Set A/D encoding result=40 01:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:02:57 Set channel filter=0.000000e+000 result=40 01:02:57 Config A/D Result=40 01:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:02:57 Get A/D filter: -9.255963e+061 result=40 01:02:57 Get A/D value=-858993460 result=40 01:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:02:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:02:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:02:57 Aux= 01:02:57 Message to Camera, serial 204283 queued 01:03:34 Received message from Master: op=PointingHead serial=204296 01:03:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:03:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:03:34 Point started: ret=0 01:03:34 point_skyscan result=0 01:03:35 Check angles 01:03:35 SkyScan query 01:03:35 SkyScan query done: ret=0 az=153.195<-10213 ze=9.03<-11398 Statuses=0009 0009 01:03:35 Msec=0 True Az=153.195 Ze=9.03 Az status=0009 Ze status=0009 01:03:36 Check angles 01:03:36 SkyScan query 01:03:36 SkyScan query done: ret=0 az=135.81<-9054 ze=-12<-12800 Statuses=0009 0009 01:03:36 Msec=750 True Az=135.81 Ze=-12 Az status=0009 Ze status=0009 01:03:36 Check angles 01:03:36 SkyScan query 01:03:37 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.33<-14222 Statuses=0009 0009 01:03:37 Msec=1500 True Az=117.78 Ze=-33.33 Az status=0009 Ze status=0009 01:03:37 Check angles 01:03:37 SkyScan query 01:03:38 SkyScan query done: ret=0 az=100.56<-6704 ze=-51.555<-15437 Statuses=0009 0009 01:03:38 Msec=2250 True Az=100.56 Ze=-51.555 Az status=0009 Ze status=0009 01:03:38 Check angles 01:03:38 SkyScan query 01:03:39 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 01:03:39 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 01:03:39 Check angles 01:03:39 SkyScan query 01:03:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:03:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:03:39 Message to Master queued w/err=0: serial=204296 error=0 01:03:44 Received message from Master: op=Filter serial=204297 01:03:44 Color wheel filter change from 0 to 0 01:03:44 FLIGetFilterPos err=0 currentPosition=0 01:03:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:03:44 Filter is already there-color wheel unchanged 01:03:44 Received message from Master: op=Shutter serial=204298 01:03:44 Shutter LASER close 01:03:44 Received message from Camera: op=State serial=204300 01:03:44 GetSingleValue result=40 Value=cccccccc 01:03:44 SkyScan query 01:03:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:03:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:45 Parameters OK 01:03:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:45 Set A/D data flow result=40 01:03:45 Set A/D channel type result=40 01:03:45 Set A/D encoding result=40 01:03:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:45 Set channel filter=0.000000e+000 result=40 01:03:45 Config A/D Result=40 01:03:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:45 Get A/D filter: -9.255963e+061 result=40 01:03:45 Get A/D value=-858993460 result=40 01:03:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:03:45 Parameters OK 01:03:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:03:45 Set A/D data flow result=40 01:03:45 Set A/D channel type result=40 01:03:45 Set A/D encoding result=40 01:03:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:03:45 Set channel filter=0.000000e+000 result=40 01:03:45 Config A/D Result=40 01:03:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:03:45 Get A/D filter: -9.255963e+061 result=40 01:03:45 Get A/D value=-858993460 result=40 01:03:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:03:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:03:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:03:45 Aux= 01:03:45 Message to Camera, serial 204300 queued 01:04:22 Received message from Master: op=PointingHead serial=204313 01:04:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:04:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:04:22 Point started: ret=0 01:04:22 point_skyscan result=0 01:04:23 Check angles 01:04:23 SkyScan query 01:04:24 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.54<-17436 Statuses=0009 0009 01:04:24 Msec=0 True Az=109.185 Ze=-81.54 Az status=0009 Ze status=0009 01:04:24 Check angles 01:04:24 SkyScan query 01:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 01:04:24 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 01:04:24 Check angles 01:04:24 SkyScan query 01:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 01:04:25 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 01:04:25 Check angles 01:04:25 SkyScan query 01:04:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 01:04:26 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 01:04:26 Check angles 01:04:26 SkyScan query 01:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 01:04:27 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 01:04:27 Check angles 01:04:27 SkyScan query 01:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:04:27 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:04:27 Message to Master queued w/err=0: serial=204313 error=0 01:04:32 Received message from Master: op=Filter serial=204314 01:04:32 Color wheel filter change from 0 to 0 01:04:32 FLIGetFilterPos err=0 currentPosition=0 01:04:32 FLIGetStepsRemaining err=0 RemainingSteps=0 01:04:32 Filter is already there-color wheel unchanged 01:04:32 Received message from Master: op=Shutter serial=204315 01:04:32 Shutter LASER open 01:04:33 Received message from Camera: op=State serial=204317 01:04:33 GetSingleValue result=40 Value=cccccccc 01:04:33 SkyScan query 01:04:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:04:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:33 Parameters OK 01:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:33 Set A/D data flow result=40 01:04:33 Set A/D channel type result=40 01:04:33 Set A/D encoding result=40 01:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:33 Set channel filter=0.000000e+000 result=40 01:04:33 Config A/D Result=40 01:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:33 Get A/D filter: -9.255963e+061 result=40 01:04:33 Get A/D value=-858993460 result=40 01:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:33 Parameters OK 01:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:33 Set A/D data flow result=40 01:04:33 Set A/D channel type result=40 01:04:33 Set A/D encoding result=40 01:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:33 Set channel filter=0.000000e+000 result=40 01:04:33 Config A/D Result=40 01:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:33 Get A/D filter: -9.255963e+061 result=40 01:04:33 Get A/D value=-858993460 result=40 01:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:04:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:04:33 Aux= 01:04:33 Message to Camera, serial 204317 queued 01:04:42 Received message from Master: op=Shutter serial=204327 01:04:42 Shutter LASER close 01:04:42 Received message from Master: op=PointingHead serial=204331 01:04:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:04:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:04:42 Point started: ret=0 01:04:42 point_skyscan result=0 01:04:43 Check angles 01:04:43 SkyScan query 01:04:44 SkyScan query done: ret=0 az=89.835<-5989 ze=157.245<-1517 Statuses=0009 0009 01:04:44 Msec=0 True Az=89.835 Ze=157.245 Az status=0009 Ze status=0009 01:04:44 Check angles 01:04:44 SkyScan query 01:04:45 SkyScan query done: ret=0 az=71.94<-4796 ze=135.78<-2948 Statuses=0009 0009 01:04:45 Msec=750 True Az=71.94 Ze=135.78 Az status=0009 Ze status=0009 01:04:45 Check angles 01:04:45 SkyScan query 01:04:45 SkyScan query done: ret=0 az=54.06<-3604 ze=114.405<-4373 Statuses=0009 0009 01:04:45 Msec=1500 True Az=54.06 Ze=114.405 Az status=0009 Ze status=0009 01:04:46 Check angles 01:04:46 SkyScan query 01:04:46 SkyScan query done: ret=0 az=40.995<-2733 ze=93.525<-5765 Statuses=0009 0009 01:04:46 Msec=2250 True Az=40.995 Ze=93.525 Az status=0009 Ze status=0009 01:04:46 Check angles 01:04:46 SkyScan query 01:04:47 SkyScan query done: ret=0 az=40.98<-2732 ze=72.54<-7164 Statuses=0008 0009 01:04:47 Msec=3000 True Az=40.98 Ze=72.54 Az status=0008 Ze status=0009 01:04:47 Check angles 01:04:47 SkyScan query 01:04:48 SkyScan query done: ret=0 az=40.98<-2732 ze=52.305<-8513 Statuses=0008 0009 01:04:48 Msec=3750 True Az=40.98 Ze=52.305 Az status=0008 Ze status=0009 01:04:48 Check angles 01:04:48 SkyScan query 01:04:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:04:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:04:48 Message to Master queued w/err=0: serial=204331 error=0 01:04:53 Received message from Master: op=Filter serial=204332 01:04:53 Color wheel filter change from 0 to 0 01:04:53 FLIGetFilterPos err=0 currentPosition=0 01:04:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:04:53 Filter is already there-color wheel unchanged 01:04:54 Received message from Master: op=Shutter serial=204333 01:04:54 Shutter LASER close 01:04:54 Received message from Camera: op=State serial=204335 01:04:54 GetSingleValue result=40 Value=cccccccc 01:04:54 SkyScan query 01:04:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:04:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:54 Parameters OK 01:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:54 Set A/D data flow result=40 01:04:54 Set A/D channel type result=40 01:04:54 Set A/D encoding result=40 01:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:54 Set channel filter=0.000000e+000 result=40 01:04:54 Config A/D Result=40 01:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:54 Get A/D filter: -9.255963e+061 result=40 01:04:54 Get A/D value=-858993460 result=40 01:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:04:54 Parameters OK 01:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:04:54 Set A/D data flow result=40 01:04:54 Set A/D channel type result=40 01:04:54 Set A/D encoding result=40 01:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:04:54 Set channel filter=0.000000e+000 result=40 01:04:54 Config A/D Result=40 01:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:04:54 Get A/D filter: -9.255963e+061 result=40 01:04:54 Get A/D value=-858993460 result=40 01:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:04:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:04:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:04:54 Aux= 01:04:54 Message to Camera, serial 204335 queued 01:05:31 Received message from Master: op=PointingHead serial=204348 01:05:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:05:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:05:31 Point started: ret=0 01:05:31 point_skyscan result=0 01:05:32 Check angles 01:05:32 SkyScan query 01:05:33 SkyScan query done: ret=0 az=64.365<-4291 ze=66.555<-7563 Statuses=0009 0008 01:05:33 Msec=0 True Az=64.365 Ze=66.555 Az status=0009 Ze status=0008 01:05:33 Check angles 01:05:33 SkyScan query 01:05:34 SkyScan query done: ret=0 az=82.35<-5490 ze=66.495<-7567 Statuses=0009 0008 01:05:34 Msec=750 True Az=82.35 Ze=66.495 Az status=0009 Ze status=0008 01:05:34 Check angles 01:05:34 SkyScan query 01:05:34 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 01:05:34 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 01:05:34 Check angles 01:05:34 SkyScan query 01:05:35 SkyScan query done: ret=0 az=117.21<-7814 ze=66.495<-7567 Statuses=0009 0008 01:05:35 Msec=2250 True Az=117.21 Ze=66.495 Az status=0009 Ze status=0008 01:05:35 Check angles 01:05:35 SkyScan query 01:05:36 SkyScan query done: ret=0 az=134.715<-8981 ze=66.495<-7567 Statuses=0009 0008 01:05:36 Msec=3000 True Az=134.715 Ze=66.495 Az status=0009 Ze status=0008 01:05:36 Check angles 01:05:36 SkyScan query 01:05:37 SkyScan query done: ret=0 az=151.995<-10133 ze=66.495<-7567 Statuses=0009 0008 01:05:37 Msec=3750 True Az=151.995 Ze=66.495 Az status=0009 Ze status=0008 01:05:37 Check angles 01:05:37 SkyScan query 01:05:37 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:05:37 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:05:37 Message to Master queued w/err=0: serial=204348 error=0 [UTC 2018-12-17 01:05:42] 01:05:42 Received message from Master: op=Filter serial=204349 01:05:42 Color wheel filter change from 0 to 0 01:05:42 FLIGetFilterPos err=0 currentPosition=0 01:05:42 FLIGetStepsRemaining err=0 RemainingSteps=0 01:05:42 Filter is already there-color wheel unchanged 01:05:43 Received message from Master: op=Shutter serial=204350 01:05:43 Shutter LASER close 01:05:43 Received message from Camera: op=State serial=204352 01:05:43 GetSingleValue result=40 Value=cccccccc 01:05:43 SkyScan query 01:05:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:05:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:43 Parameters OK 01:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:43 Set A/D data flow result=40 01:05:43 Set A/D channel type result=40 01:05:43 Set A/D encoding result=40 01:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:43 Set channel filter=0.000000e+000 result=40 01:05:43 Config A/D Result=40 01:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:43 Get A/D filter: -9.255963e+061 result=40 01:05:43 Get A/D value=-858993460 result=40 01:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:05:43 Parameters OK 01:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:05:43 Set A/D data flow result=40 01:05:43 Set A/D channel type result=40 01:05:43 Set A/D encoding result=40 01:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:05:43 Set channel filter=0.000000e+000 result=40 01:05:43 Config A/D Result=40 01:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:05:43 Get A/D filter: -9.255963e+061 result=40 01:05:43 Get A/D value=-858993460 result=40 01:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:05:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:05:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:05:43 Aux= 01:05:43 Message to Camera, serial 204352 queued 01:06:20 Received message from Master: op=PointingHead serial=204365 01:06:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:06:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:06:20 Point started: ret=0 01:06:20 point_skyscan result=0 01:06:21 Check angles 01:06:21 SkyScan query 01:06:22 SkyScan query done: ret=0 az=135.15<-9010 ze=36.885<-9541 Statuses=0009 0009 01:06:22 Msec=0 True Az=135.15 Ze=36.885 Az status=0009 Ze status=0009 01:06:22 Check angles 01:06:22 SkyScan query 01:06:22 SkyScan query done: ret=0 az=117.675<-7845 ze=15.93<-10938 Statuses=0009 0009 01:06:22 Msec=750 True Az=117.675 Ze=15.93 Az status=0009 Ze status=0009 01:06:23 Check angles 01:06:23 SkyScan query 01:06:23 SkyScan query done: ret=0 az=100.335<-6689 ze=-4.995<-12333 Statuses=0009 0009 01:06:23 Msec=1500 True Az=100.335 Ze=-4.995 Az status=0009 Ze status=0009 01:06:23 Check angles 01:06:23 SkyScan query 01:06:24 SkyScan query done: ret=0 az=82.755<-5517 ze=-25.965<-13731 Statuses=0009 0009 01:06:24 Msec=2250 True Az=82.755 Ze=-25.965 Az status=0009 Ze status=0009 01:06:24 Check angles 01:06:24 SkyScan query 01:06:25 SkyScan query done: ret=0 az=65.355<-4357 ze=-38.595<-14573 Statuses=0009 0008 01:06:25 Msec=3000 True Az=65.355 Ze=-38.595 Az status=0009 Ze status=0008 01:06:25 Check angles 01:06:25 SkyScan query 01:06:25 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.52<-14568 Statuses=0009 0008 01:06:25 Msec=3750 True Az=47.505 Ze=-38.52 Az status=0009 Ze status=0008 01:06:26 Check angles 01:06:26 SkyScan query 01:06:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:06:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:06:26 Message to Master queued w/err=0: serial=204365 error=0 01:06:31 Received message from Master: op=Filter serial=204366 01:06:31 Color wheel filter change from 0 to 0 01:06:31 FLIGetFilterPos err=0 currentPosition=0 01:06:31 FLIGetStepsRemaining err=0 RemainingSteps=0 01:06:31 Filter is already there-color wheel unchanged 01:06:31 Received message from Master: op=Shutter serial=204367 01:06:31 Shutter LASER close 01:06:31 Received message from Camera: op=State serial=204369 01:06:31 GetSingleValue result=40 Value=cccccccc 01:06:31 SkyScan query 01:06:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:06:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:32 Parameters OK 01:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:32 Set A/D data flow result=40 01:06:32 Set A/D channel type result=40 01:06:32 Set A/D encoding result=40 01:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:32 Set channel filter=0.000000e+000 result=40 01:06:32 Config A/D Result=40 01:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:32 Get A/D filter: -9.255963e+061 result=40 01:06:32 Get A/D value=-858993460 result=40 01:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:06:32 Parameters OK 01:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:06:32 Set A/D data flow result=40 01:06:32 Set A/D channel type result=40 01:06:32 Set A/D encoding result=40 01:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:06:32 Set channel filter=0.000000e+000 result=40 01:06:32 Config A/D Result=40 01:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:06:32 Get A/D filter: -9.255963e+061 result=40 01:06:32 Get A/D value=-858993460 result=40 01:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:06:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:06:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:06:32 Aux= 01:06:32 Message to Camera, serial 204369 queued 01:07:09 Received message from Master: op=PointingHead serial=204382 01:07:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:07:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:07:09 Point started: ret=0 01:07:09 point_skyscan result=0 01:07:10 Check angles 01:07:10 SkyScan query 01:07:10 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.145<-16543 Statuses=0009 0009 01:07:10 Msec=0 True Az=63.84 Ze=-68.145 Az status=0009 Ze status=0009 01:07:11 Check angles 01:07:11 SkyScan query 01:07:11 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.145<-17943 Statuses=0009 0009 01:07:11 Msec=750 True Az=81.315 Ze=-89.145 Az status=0009 Ze status=0009 01:07:11 Check angles 01:07:11 SkyScan query 01:07:12 SkyScan query done: ret=0 az=98.79<-6586 ze=-110.055<-19337 Statuses=0009 0009 01:07:12 Msec=1500 True Az=98.79 Ze=-110.055 Az status=0009 Ze status=0009 01:07:12 Check angles 01:07:12 SkyScan query 01:07:13 SkyScan query done: ret=0 az=116.175<-7745 ze=-131.07<-20738 Statuses=0009 0009 01:07:13 Msec=2250 True Az=116.175 Ze=-131.07 Az status=0009 Ze status=0009 01:07:13 Check angles 01:07:13 SkyScan query 01:07:13 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 01:07:13 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 01:07:14 Check angles 01:07:14 SkyScan query 01:07:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 01:07:14 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 01:07:14 Message to Master queued w/err=0: serial=204382 error=0 01:07:19 Received message from Master: op=Filter serial=204383 01:07:19 Color wheel filter change from 0 to 0 01:07:19 FLIGetFilterPos err=0 currentPosition=0 01:07:19 FLIGetStepsRemaining err=0 RemainingSteps=0 01:07:19 Filter is already there-color wheel unchanged 01:07:19 Received message from Master: op=Shutter serial=204384 01:07:19 Shutter LASER close 01:07:19 Received message from Camera: op=State serial=204386 01:07:19 GetSingleValue result=40 Value=cccccccc 01:07:19 SkyScan query 01:07:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:07:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:20 Parameters OK 01:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:20 Set A/D data flow result=40 01:07:20 Set A/D channel type result=40 01:07:20 Set A/D encoding result=40 01:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:20 Set channel filter=0.000000e+000 result=40 01:07:20 Config A/D Result=40 01:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:20 Get A/D filter: -9.255963e+061 result=40 01:07:20 Get A/D value=-858993460 result=40 01:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:07:20 Parameters OK 01:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:07:20 Set A/D data flow result=40 01:07:20 Set A/D channel type result=40 01:07:20 Set A/D encoding result=40 01:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:07:20 Set channel filter=0.000000e+000 result=40 01:07:20 Config A/D Result=40 01:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:07:20 Get A/D filter: -9.255963e+061 result=40 01:07:20 Get A/D value=-858993460 result=40 01:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:07:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:07:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:07:20 Aux= 01:07:20 Message to Camera, serial 204386 queued 01:07:57 Received message from Master: op=PointingHead serial=204399 01:07:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:07:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:07:57 Point started: ret=0 01:07:57 point_skyscan result=0 01:07:58 Check angles 01:07:58 SkyScan query 01:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0009 0009 01:07:59 Msec=0 True Az=112.995 Ze=-171.18 Az status=0009 Ze status=0009 01:07:59 Check angles 01:07:59 SkyScan query 01:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:07:59 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:07:59 Message to Master queued w/err=0: serial=204399 error=0 01:08:04 Received message from Master: op=Filter serial=204400 01:08:04 Color wheel filter change from 0 to 0 01:08:04 FLIGetFilterPos err=0 currentPosition=0 01:08:04 FLIGetStepsRemaining err=0 RemainingSteps=0 01:08:04 Filter is already there-color wheel unchanged 01:08:05 Received message from Master: op=Shutter serial=204401 01:08:05 Shutter LASER open 01:08:05 Received message from Camera: op=State serial=204403 01:08:05 GetSingleValue result=40 Value=cccccccc 01:08:05 SkyScan query 01:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:08:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:05 Parameters OK 01:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:05 Set A/D data flow result=40 01:08:05 Set A/D channel type result=40 01:08:05 Set A/D encoding result=40 01:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:05 Set channel filter=0.000000e+000 result=40 01:08:05 Config A/D Result=40 01:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:05 Get A/D filter: -9.255963e+061 result=40 01:08:05 Get A/D value=-858993460 result=40 01:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:05 Parameters OK 01:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:05 Set A/D data flow result=40 01:08:05 Set A/D channel type result=40 01:08:05 Set A/D encoding result=40 01:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:05 Set channel filter=0.000000e+000 result=40 01:08:05 Config A/D Result=40 01:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:05 Get A/D filter: -9.255963e+061 result=40 01:08:05 Get A/D value=-858993460 result=40 01:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:08:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:08:05 Aux= 01:08:05 Message to Camera, serial 204403 queued 01:08:14 Received message from Master: op=Shutter serial=204413 01:08:14 Shutter LASER close 01:08:14 Received message from Master: op=PointingHead serial=204417 01:08:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:08:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:08:15 Point started: ret=0 01:08:15 point_skyscan result=0 01:08:15 Check angles 01:08:15 SkyScan query 01:08:16 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.83<-21522 Statuses=0009 0009 01:08:16 Msec=0 True Az=136.35 Ze=-142.83 Az status=0009 Ze status=0009 01:08:16 Check angles 01:08:16 SkyScan query 01:08:17 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.875<-20125 Statuses=0009 0009 01:08:17 Msec=750 True Az=153.795 Ze=-121.875 Az status=0009 Ze status=0009 01:08:17 Check angles 01:08:17 SkyScan query 01:08:18 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.86<-18724 Statuses=0009 0009 01:08:18 Msec=1500 True Az=171.42 Ze=-100.86 Az status=0009 Ze status=0009 01:08:18 Check angles 01:08:18 SkyScan query 01:08:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.98<-17332 Statuses=0008 0009 01:08:18 Msec=2250 True Az=175.995 Ze=-79.98 Az status=0008 Ze status=0009 01:08:18 Check angles 01:08:18 SkyScan query 01:08:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 01:08:19 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 01:08:19 Check angles 01:08:19 SkyScan query 01:08:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:08:20 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:08:20 Message to Master queued w/err=0: serial=204417 error=0 01:08:25 Received message from Master: op=Filter serial=204418 01:08:25 Color wheel filter change from 0 to 0 01:08:25 FLIGetFilterPos err=0 currentPosition=0 01:08:25 FLIGetStepsRemaining err=0 RemainingSteps=0 01:08:25 Filter is already there-color wheel unchanged 01:08:25 Received message from Master: op=Shutter serial=204419 01:08:25 Shutter LASER close 01:08:25 Received message from Camera: op=State serial=204421 01:08:25 GetSingleValue result=40 Value=cccccccc 01:08:25 SkyScan query 01:08:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:08:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:26 Parameters OK 01:08:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:26 Set A/D data flow result=40 01:08:26 Set A/D channel type result=40 01:08:26 Set A/D encoding result=40 01:08:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:26 Set channel filter=0.000000e+000 result=40 01:08:26 Config A/D Result=40 01:08:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:26 Get A/D filter: -9.255963e+061 result=40 01:08:26 Get A/D value=-858993460 result=40 01:08:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:08:26 Parameters OK 01:08:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:08:26 Set A/D data flow result=40 01:08:26 Set A/D channel type result=40 01:08:26 Set A/D encoding result=40 01:08:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:08:26 Set channel filter=0.000000e+000 result=40 01:08:26 Config A/D Result=40 01:08:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:08:26 Get A/D filter: -9.255963e+061 result=40 01:08:26 Get A/D value=-858993460 result=40 01:08:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:08:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:08:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:08:26 Aux= 01:08:26 Message to Camera, serial 204421 queued 01:09:03 Received message from Master: op=PointingHead serial=204434 01:09:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:09:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:09:03 Point started: ret=0 01:09:03 point_skyscan result=0 01:09:04 Check angles 01:09:04 SkyScan query 01:09:04 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.915<-13461 Statuses=0009 0009 01:09:04 Msec=0 True Az=153.105 Ze=-21.915 Az status=0009 Ze status=0009 01:09:04 Check angles 01:09:04 SkyScan query 01:09:05 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.945<-12063 Statuses=0009 0009 01:09:05 Msec=750 True Az=135.705 Ze=-0.945 Az status=0009 Ze status=0009 01:09:05 Check angles 01:09:05 SkyScan query 01:09:06 SkyScan query done: ret=0 az=118.14<-7876 ze=19.995<-10667 Statuses=0009 0009 01:09:06 Msec=1500 True Az=118.14 Ze=19.995 Az status=0009 Ze status=0009 01:09:06 Check angles 01:09:06 SkyScan query 01:09:06 SkyScan query done: ret=0 az=100.725<-6715 ze=40.98<-9268 Statuses=0009 0009 01:09:06 Msec=2250 True Az=100.725 Ze=40.98 Az status=0009 Ze status=0009 01:09:07 Check angles 01:09:07 SkyScan query 01:09:07 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 01:09:07 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 01:09:07 Check angles 01:09:07 SkyScan query 01:09:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:09:08 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 01:09:08 Message to Master queued w/err=0: serial=204434 error=0 01:09:13 Received message from Master: op=Filter serial=204435 01:09:13 Color wheel filter change from 0 to 0 01:09:13 FLIGetFilterPos err=0 currentPosition=0 01:09:13 FLIGetStepsRemaining err=0 RemainingSteps=0 01:09:13 Filter is already there-color wheel unchanged 01:09:13 Received message from Master: op=Shutter serial=204436 01:09:13 Shutter LASER close 01:09:13 Received message from Camera: op=State serial=204438 01:09:13 GetSingleValue result=40 Value=cccccccc 01:09:13 SkyScan query 01:09:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 01:09:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:14 Parameters OK 01:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:14 Set A/D data flow result=40 01:09:14 Set A/D channel type result=40 01:09:14 Set A/D encoding result=40 01:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:14 Set channel filter=0.000000e+000 result=40 01:09:14 Config A/D Result=40 01:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:14 Get A/D filter: -9.255963e+061 result=40 01:09:14 Get A/D value=-858993460 result=40 01:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:09:14 Parameters OK 01:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:09:14 Set A/D data flow result=40 01:09:14 Set A/D channel type result=40 01:09:14 Set A/D encoding result=40 01:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:09:14 Set channel filter=0.000000e+000 result=40 01:09:14 Config A/D Result=40 01:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:09:14 Get A/D filter: -9.255963e+061 result=40 01:09:14 Get A/D value=-858993460 result=40 01:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:09:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:09:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:09:14 Aux= 01:09:14 Message to Camera, serial 204438 queued 01:09:51 Received message from Master: op=PointingHead serial=204451 01:09:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:09:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:09:51 Point started: ret=0 01:09:51 point_skyscan result=0 01:09:52 Check angles 01:09:52 SkyScan query 01:09:52 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 01:09:52 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 01:09:52 Check angles 01:09:52 SkyScan query 01:09:53 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 01:09:53 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 01:09:53 Check angles 01:09:53 SkyScan query 01:09:54 SkyScan query done: ret=0 az=144.33<-9622 ze=38.505<-9433 Statuses=0009 0008 01:09:54 Msec=1500 True Az=144.33 Ze=38.505 Az status=0009 Ze status=0008 01:09:54 Check angles 01:09:54 SkyScan query 01:09:55 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 01:09:55 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 01:09:55 Check angles 01:09:55 SkyScan query 01:09:55 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:09:55 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:09:55 Check angles 01:09:55 SkyScan query 01:09:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:09:56 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:09:56 Message to Master queued w/err=0: serial=204451 error=0 01:10:01 Received message from Master: op=Filter serial=204452 01:10:01 Color wheel filter change from 0 to 0 01:10:01 FLIGetFilterPos err=0 currentPosition=0 01:10:01 FLIGetStepsRemaining err=0 RemainingSteps=0 01:10:01 Filter is already there-color wheel unchanged 01:10:01 Received message from Master: op=Shutter serial=204453 01:10:01 Shutter LASER close 01:10:01 Received message from Camera: op=State serial=204455 01:10:01 GetSingleValue result=40 Value=cccccccc 01:10:01 SkyScan query 01:10:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:10:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:02 Parameters OK 01:10:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:02 Set A/D data flow result=40 01:10:02 Set A/D channel type result=40 01:10:02 Set A/D encoding result=40 01:10:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:02 Set channel filter=0.000000e+000 result=40 01:10:02 Config A/D Result=40 01:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:02 Get A/D filter: -9.255963e+061 result=40 01:10:02 Get A/D value=-858993460 result=40 01:10:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:02 Parameters OK 01:10:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:02 Set A/D data flow result=40 01:10:02 Set A/D channel type result=40 01:10:02 Set A/D encoding result=40 01:10:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:02 Set channel filter=0.000000e+000 result=40 01:10:02 Config A/D Result=40 01:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:02 Get A/D filter: -9.255963e+061 result=40 01:10:02 Get A/D value=-858993460 result=40 01:10:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:10:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:10:02 Aux= 01:10:02 Message to Camera, serial 204455 queued 01:10:39 Received message from Master: op=PointingHead serial=204468 01:10:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:10:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:10:39 Point started: ret=0 01:10:39 point_skyscan result=0 01:10:40 Check angles 01:10:40 SkyScan query 01:10:40 SkyScan query done: ret=0 az=152.955<-10197 ze=8.715<-11419 Statuses=0009 0009 01:10:40 Msec=0 True Az=152.955 Ze=8.715 Az status=0009 Ze status=0009 01:10:41 Check angles 01:10:41 SkyScan query 01:10:41 SkyScan query done: ret=0 az=135.585<-9039 ze=-12.315<-12821 Statuses=0009 0009 01:10:41 Msec=750 True Az=135.585 Ze=-12.315 Az status=0009 Ze status=0009 01:10:41 Check angles 01:10:41 SkyScan query 01:10:42 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.18<-14212 Statuses=0009 0009 01:10:42 Msec=1500 True Az=118.005 Ze=-33.18 Az status=0009 Ze status=0009 01:10:42 Check angles 01:10:42 SkyScan query 01:10:43 SkyScan query done: ret=0 az=100.695<-6713 ze=-51.555<-15437 Statuses=0009 0009 01:10:43 Msec=2250 True Az=100.695 Ze=-51.555 Az status=0009 Ze status=0009 01:10:43 Check angles 01:10:43 SkyScan query 01:10:43 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 01:10:43 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 01:10:44 Check angles 01:10:44 SkyScan query 01:10:44 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 01:10:44 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 01:10:44 Message to Master queued w/err=0: serial=204468 error=0 01:10:49 Received message from Master: op=Filter serial=204469 01:10:49 Color wheel filter change from 0 to 0 01:10:49 FLIGetFilterPos err=0 currentPosition=0 01:10:49 FLIGetStepsRemaining err=0 RemainingSteps=0 01:10:49 Filter is already there-color wheel unchanged 01:10:49 Received message from Master: op=Shutter serial=204470 01:10:49 Shutter LASER close 01:10:49 Received message from Camera: op=State serial=204472 01:10:49 GetSingleValue result=40 Value=cccccccc 01:10:49 SkyScan query 01:10:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:10:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:50 Parameters OK 01:10:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:50 Set A/D data flow result=40 01:10:50 Set A/D channel type result=40 01:10:50 Set A/D encoding result=40 01:10:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:50 Set channel filter=0.000000e+000 result=40 01:10:50 Config A/D Result=40 01:10:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:50 Get A/D filter: -9.255963e+061 result=40 01:10:50 Get A/D value=-858993460 result=40 01:10:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:10:50 Parameters OK 01:10:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:10:50 Set A/D data flow result=40 01:10:50 Set A/D channel type result=40 01:10:50 Set A/D encoding result=40 01:10:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:10:50 Set channel filter=0.000000e+000 result=40 01:10:50 Config A/D Result=40 01:10:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:10:50 Get A/D filter: -9.255963e+061 result=40 01:10:50 Get A/D value=-858993460 result=40 01:10:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:10:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:10:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:10:50 Aux= 01:10:50 Message to Camera, serial 204472 queued 01:11:27 Received message from Master: op=PointingHead serial=204485 01:11:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:11:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:11:27 Point started: ret=0 01:11:27 point_skyscan result=0 01:11:28 Check angles 01:11:28 SkyScan query 01:11:28 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.495<-17433 Statuses=0009 0009 01:11:28 Msec=0 True Az=109.14 Ze=-81.495 Az status=0009 Ze status=0009 01:11:29 Check angles 01:11:29 SkyScan query 01:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.885<-18859 Statuses=0008 0009 01:11:29 Msec=750 True Az=112.995 Ze=-102.885 Az status=0008 Ze status=0009 01:11:29 Check angles 01:11:29 SkyScan query 01:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.84<-20256 Statuses=0008 0009 01:11:30 Msec=1500 True Az=112.995 Ze=-123.84 Az status=0008 Ze status=0009 01:11:30 Check angles 01:11:30 SkyScan query 01:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.185<-21679 Statuses=0008 0009 01:11:31 Msec=2250 True Az=112.995 Ze=-145.185 Az status=0008 Ze status=0009 01:11:31 Check angles 01:11:31 SkyScan query 01:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.635<-23109 Statuses=0008 0009 01:11:31 Msec=3000 True Az=112.995 Ze=-166.635 Az status=0008 Ze status=0009 01:11:32 Check angles 01:11:32 SkyScan query 01:11:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:11:32 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:11:32 Message to Master queued w/err=0: serial=204485 error=0 01:11:37 Received message from Master: op=Filter serial=204486 01:11:37 Color wheel filter change from 0 to 0 01:11:37 FLIGetFilterPos err=0 currentPosition=0 01:11:37 FLIGetStepsRemaining err=0 RemainingSteps=0 01:11:37 Filter is already there-color wheel unchanged 01:11:37 Received message from Master: op=Shutter serial=204487 01:11:37 Shutter LASER open 01:11:38 Received message from Camera: op=State serial=204489 01:11:38 GetSingleValue result=40 Value=cccccccc 01:11:38 SkyScan query 01:11:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:11:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:38 Parameters OK 01:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:38 Set A/D data flow result=40 01:11:38 Set A/D channel type result=40 01:11:38 Set A/D encoding result=40 01:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:38 Set channel filter=0.000000e+000 result=40 01:11:38 Config A/D Result=40 01:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:38 Get A/D filter: -9.255963e+061 result=40 01:11:38 Get A/D value=-858993460 result=40 01:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:38 Parameters OK 01:11:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:38 Set A/D data flow result=40 01:11:38 Set A/D channel type result=40 01:11:38 Set A/D encoding result=40 01:11:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:38 Set channel filter=0.000000e+000 result=40 01:11:38 Config A/D Result=40 01:11:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:38 Get A/D filter: -9.255963e+061 result=40 01:11:38 Get A/D value=-858993460 result=40 01:11:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:11:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:11:38 Aux= 01:11:38 Message to Camera, serial 204489 queued 01:11:47 Received message from Master: op=Shutter serial=204499 01:11:47 Shutter LASER close 01:11:47 Received message from Master: op=PointingHead serial=204503 01:11:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:11:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:11:47 Point started: ret=0 01:11:47 point_skyscan result=0 01:11:48 Check angles 01:11:48 SkyScan query 01:11:49 SkyScan query done: ret=0 az=89.835<-5989 ze=157.2<-1520 Statuses=0009 0009 01:11:49 Msec=0 True Az=89.835 Ze=157.2 Az status=0009 Ze status=0009 01:11:49 Check angles 01:11:49 SkyScan query 01:11:49 SkyScan query done: ret=0 az=72.3<-4820 ze=136.245<-2917 Statuses=0009 0009 01:11:49 Msec=750 True Az=72.3 Ze=136.245 Az status=0009 Ze status=0009 01:11:50 Check angles 01:11:50 SkyScan query 01:11:50 SkyScan query done: ret=0 az=54.885<-3659 ze=115.32<-4312 Statuses=0009 0009 01:11:50 Msec=1500 True Az=54.885 Ze=115.32 Az status=0009 Ze status=0009 01:11:50 Check angles 01:11:50 SkyScan query 01:11:51 SkyScan query done: ret=0 az=41.01<-2734 ze=94.32<-5712 Statuses=0009 0009 01:11:51 Msec=2250 True Az=41.01 Ze=94.32 Az status=0009 Ze status=0009 01:11:51 Check angles 01:11:51 SkyScan query 01:11:52 SkyScan query done: ret=0 az=40.98<-2732 ze=72.885<-7141 Statuses=0008 0009 01:11:52 Msec=3000 True Az=40.98 Ze=72.885 Az status=0008 Ze status=0009 01:11:52 Check angles 01:11:52 SkyScan query 01:11:52 SkyScan query done: ret=0 az=40.98<-2732 ze=52.515<-8499 Statuses=0008 0009 01:11:52 Msec=3750 True Az=40.98 Ze=52.515 Az status=0008 Ze status=0009 01:11:53 Check angles 01:11:53 SkyScan query 01:11:53 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 01:11:53 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 01:11:53 Message to Master queued w/err=0: serial=204503 error=0 01:11:58 Received message from Master: op=Filter serial=204504 01:11:58 Color wheel filter change from 0 to 0 01:11:58 FLIGetFilterPos err=0 currentPosition=0 01:11:58 FLIGetStepsRemaining err=0 RemainingSteps=0 01:11:58 Filter is already there-color wheel unchanged 01:11:58 Received message from Master: op=Shutter serial=204505 01:11:58 Shutter LASER close 01:11:59 Received message from Camera: op=State serial=204507 01:11:59 GetSingleValue result=40 Value=cccccccc 01:11:59 SkyScan query 01:11:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:11:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:59 Parameters OK 01:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:59 Set A/D data flow result=40 01:11:59 Set A/D channel type result=40 01:11:59 Set A/D encoding result=40 01:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:59 Set channel filter=0.000000e+000 result=40 01:11:59 Config A/D Result=40 01:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:59 Get A/D filter: -9.255963e+061 result=40 01:11:59 Get A/D value=-858993460 result=40 01:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:11:59 Parameters OK 01:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:11:59 Set A/D data flow result=40 01:11:59 Set A/D channel type result=40 01:11:59 Set A/D encoding result=40 01:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:11:59 Set channel filter=0.000000e+000 result=40 01:11:59 Config A/D Result=40 01:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:11:59 Get A/D filter: -9.255963e+061 result=40 01:11:59 Get A/D value=-858993460 result=40 01:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:11:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:11:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:11:59 Aux= 01:11:59 Message to Camera, serial 204507 queued 01:12:35 Received message from Master: op=PointingHead serial=204519 01:12:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:12:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:12:35 Point started: ret=0 01:12:35 point_skyscan result=0 01:12:36 Check angles 01:12:36 SkyScan query 01:12:37 SkyScan query done: ret=0 az=63.84<-4256 ze=66.54<-7564 Statuses=0009 0008 01:12:37 Msec=0 True Az=63.84 Ze=66.54 Az status=0009 Ze status=0008 01:12:37 Check angles 01:12:37 SkyScan query 01:12:37 SkyScan query done: ret=0 az=81.375<-5425 ze=66.51<-7566 Statuses=0009 0008 01:12:37 Msec=750 True Az=81.375 Ze=66.51 Az status=0009 Ze status=0008 01:12:38 Check angles 01:12:38 SkyScan query 01:12:38 SkyScan query done: ret=0 az=98.805<-6587 ze=66.495<-7567 Statuses=0009 0008 01:12:38 Msec=1500 True Az=98.805 Ze=66.495 Az status=0009 Ze status=0008 01:12:38 Check angles 01:12:38 SkyScan query 01:12:39 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 01:12:39 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 01:12:39 Check angles 01:12:39 SkyScan query 01:12:40 SkyScan query done: ret=0 az=134.49<-8966 ze=66.495<-7567 Statuses=0009 0008 01:12:40 Msec=3000 True Az=134.49 Ze=66.495 Az status=0009 Ze status=0008 01:12:40 Check angles 01:12:40 SkyScan query 01:12:40 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 01:12:40 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 01:12:41 Check angles 01:12:41 SkyScan query 01:12:41 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:12:41 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:12:41 Message to Master queued w/err=0: serial=204519 error=0 01:12:46 Received message from Master: op=Filter serial=204520 01:12:46 Color wheel filter change from 0 to 0 01:12:46 FLIGetFilterPos err=0 currentPosition=0 01:12:46 FLIGetStepsRemaining err=0 RemainingSteps=0 01:12:46 Filter is already there-color wheel unchanged 01:12:46 Received message from Master: op=Shutter serial=204521 01:12:46 Shutter LASER close 01:12:46 Received message from Camera: op=State serial=204523 01:12:46 GetSingleValue result=40 Value=cccccccc 01:12:46 SkyScan query 01:12:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:12:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:47 Parameters OK 01:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:47 Set A/D data flow result=40 01:12:47 Set A/D channel type result=40 01:12:47 Set A/D encoding result=40 01:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:47 Set channel filter=0.000000e+000 result=40 01:12:47 Config A/D Result=40 01:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:47 Get A/D filter: -9.255963e+061 result=40 01:12:47 Get A/D value=-858993460 result=40 01:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:12:47 Parameters OK 01:12:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:12:47 Set A/D data flow result=40 01:12:47 Set A/D channel type result=40 01:12:47 Set A/D encoding result=40 01:12:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:12:47 Set channel filter=0.000000e+000 result=40 01:12:47 Config A/D Result=40 01:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:12:47 Get A/D filter: -9.255963e+061 result=40 01:12:47 Get A/D value=-858993460 result=40 01:12:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:12:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:12:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:12:47 Aux= 01:12:47 Message to Camera, serial 204523 queued 01:13:24 Received message from Master: op=PointingHead serial=204536 01:13:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:13:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:13:24 Point started: ret=0 01:13:24 point_skyscan result=0 01:13:25 Check angles 01:13:25 SkyScan query 01:13:26 SkyScan query done: ret=0 az=135.24<-9016 ze=36.945<-9537 Statuses=0009 0009 01:13:26 Msec=0 True Az=135.24 Ze=36.945 Az status=0009 Ze status=0009 01:13:26 Check angles 01:13:26 SkyScan query 01:13:26 SkyScan query done: ret=0 az=117.285<-7819 ze=15.66<-10956 Statuses=0009 0009 01:13:26 Msec=750 True Az=117.285 Ze=15.66 Az status=0009 Ze status=0009 01:13:26 Check angles 01:13:26 SkyScan query 01:13:27 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.385<-12359 Statuses=0009 0009 01:13:27 Msec=1500 True Az=99.915 Ze=-5.385 Az status=0009 Ze status=0009 01:13:27 Check angles 01:13:27 SkyScan query 01:13:28 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.31<-13754 Statuses=0009 0009 01:13:28 Msec=2250 True Az=82.41 Ze=-26.31 Az status=0009 Ze status=0009 01:13:28 Check angles 01:13:28 SkyScan query 01:13:29 SkyScan query done: ret=0 az=64.965<-4331 ze=-38.595<-14573 Statuses=0009 0008 01:13:29 Msec=3000 True Az=64.965 Ze=-38.595 Az status=0009 Ze status=0008 01:13:29 Check angles 01:13:29 SkyScan query 01:13:29 SkyScan query done: ret=0 az=47.475<-3165 ze=-38.52<-14568 Statuses=0009 0008 01:13:29 Msec=3750 True Az=47.475 Ze=-38.52 Az status=0009 Ze status=0008 01:13:29 Check angles 01:13:29 SkyScan query 01:13:30 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 01:13:30 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 01:13:30 Message to Master queued w/err=0: serial=204536 error=0 01:13:35 Received message from Master: op=Filter serial=204537 01:13:35 Color wheel filter change from 0 to 0 01:13:35 FLIGetFilterPos err=0 currentPosition=0 01:13:35 FLIGetStepsRemaining err=0 RemainingSteps=0 01:13:35 Filter is already there-color wheel unchanged 01:13:35 Received message from Master: op=Shutter serial=204538 01:13:35 Shutter LASER close 01:13:35 Received message from Camera: op=State serial=204540 01:13:35 GetSingleValue result=40 Value=cccccccc 01:13:35 SkyScan query 01:13:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:13:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:36 Parameters OK 01:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:36 Set A/D data flow result=40 01:13:36 Set A/D channel type result=40 01:13:36 Set A/D encoding result=40 01:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:36 Set channel filter=0.000000e+000 result=40 01:13:36 Config A/D Result=40 01:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:36 Get A/D filter: -9.255963e+061 result=40 01:13:36 Get A/D value=-858993460 result=40 01:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:13:36 Parameters OK 01:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:13:36 Set A/D data flow result=40 01:13:36 Set A/D channel type result=40 01:13:36 Set A/D encoding result=40 01:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:13:36 Set channel filter=0.000000e+000 result=40 01:13:36 Config A/D Result=40 01:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:13:36 Get A/D filter: -9.255963e+061 result=40 01:13:36 Get A/D value=-858993460 result=40 01:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:13:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:13:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:13:36 Aux= 01:13:36 Message to Camera, serial 204540 queued 01:14:13 Received message from Master: op=PointingHead serial=204553 01:14:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:14:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:14:13 Point started: ret=0 01:14:13 point_skyscan result=0 01:14:14 Check angles 01:14:14 SkyScan query 01:14:14 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.07<-16538 Statuses=0009 0009 01:14:14 Msec=0 True Az=63.825 Ze=-68.07 Az status=0009 Ze status=0009 01:14:15 Check angles 01:14:15 SkyScan query 01:14:15 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.535<-17969 Statuses=0009 0009 01:14:15 Msec=750 True Az=81.615 Ze=-89.535 Az status=0009 Ze status=0009 01:14:15 Check angles 01:14:15 SkyScan query 01:14:16 SkyScan query done: ret=0 az=99.3<-6620 ze=-110.49<-19366 Statuses=0009 0009 01:14:16 Msec=1500 True Az=99.3 Ze=-110.49 Az status=0009 Ze status=0009 01:14:16 Check angles 01:14:16 SkyScan query 01:14:17 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.385<-20759 Statuses=0009 0009 01:14:17 Msec=2250 True Az=116.655 Ze=-131.385 Az status=0009 Ze status=0009 01:14:17 Check angles 01:14:17 SkyScan query 01:14:17 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 01:14:17 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 01:14:18 Check angles 01:14:18 SkyScan query 01:14:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 01:14:18 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 01:14:18 Message to Master queued w/err=0: serial=204553 error=0 01:14:23 Received message from Master: op=Filter serial=204554 01:14:23 Color wheel filter change from 0 to 0 01:14:23 FLIGetFilterPos err=0 currentPosition=0 01:14:23 FLIGetStepsRemaining err=0 RemainingSteps=0 01:14:23 Filter is already there-color wheel unchanged 01:14:23 Received message from Master: op=Shutter serial=204555 01:14:23 Shutter LASER close 01:14:23 Received message from Camera: op=State serial=204557 01:14:23 GetSingleValue result=40 Value=cccccccc 01:14:23 SkyScan query 01:14:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:14:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:24 Parameters OK 01:14:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:24 Set A/D data flow result=40 01:14:24 Set A/D channel type result=40 01:14:24 Set A/D encoding result=40 01:14:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:24 Set channel filter=0.000000e+000 result=40 01:14:24 Config A/D Result=40 01:14:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:24 Get A/D filter: -9.255963e+061 result=40 01:14:24 Get A/D value=-858993460 result=40 01:14:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:14:24 Parameters OK 01:14:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:14:24 Set A/D data flow result=40 01:14:24 Set A/D channel type result=40 01:14:24 Set A/D encoding result=40 01:14:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:14:24 Set channel filter=0.000000e+000 result=40 01:14:24 Config A/D Result=40 01:14:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:14:24 Get A/D filter: -9.255963e+061 result=40 01:14:24 Get A/D value=-858993460 result=40 01:14:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:14:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:14:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:14:24 Aux= 01:14:24 Message to Camera, serial 204557 queued 01:15:00 Received message from Master: op=PointingHead serial=204569 01:15:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:15:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:15:00 Point started: ret=0 01:15:00 point_skyscan result=0 01:15:01 Check angles 01:15:01 SkyScan query 01:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.36<-23424 Statuses=0009 0009 01:15:02 Msec=0 True Az=112.995 Ze=-171.36 Az status=0009 Ze status=0009 01:15:02 Check angles 01:15:02 SkyScan query 01:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 01:15:02 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 01:15:02 Message to Master queued w/err=0: serial=204569 error=0 01:15:07 Received message from Master: op=Filter serial=204570 01:15:07 Color wheel filter change from 0 to 0 01:15:07 FLIGetFilterPos err=0 currentPosition=0 01:15:07 FLIGetStepsRemaining err=0 RemainingSteps=0 01:15:07 Filter is already there-color wheel unchanged 01:15:07 Received message from Master: op=Shutter serial=204571 01:15:07 Shutter LASER open 01:15:08 Received message from Camera: op=State serial=204573 01:15:08 GetSingleValue result=40 Value=cccccccc 01:15:08 SkyScan query 01:15:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:15:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:08 Parameters OK 01:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:08 Set A/D data flow result=40 01:15:08 Set A/D channel type result=40 01:15:08 Set A/D encoding result=40 01:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:08 Set channel filter=0.000000e+000 result=40 01:15:08 Config A/D Result=40 01:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:08 Get A/D filter: -9.255963e+061 result=40 01:15:08 Get A/D value=-858993460 result=40 01:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:08 Parameters OK 01:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:08 Set A/D data flow result=40 01:15:08 Set A/D channel type result=40 01:15:08 Set A/D encoding result=40 01:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:08 Set channel filter=0.000000e+000 result=40 01:15:08 Config A/D Result=40 01:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:08 Get A/D filter: -9.255963e+061 result=40 01:15:08 Get A/D value=-858993460 result=40 01:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:15:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:15:08 Aux= 01:15:08 Message to Camera, serial 204573 queued 01:15:17 Received message from Master: op=Shutter serial=204583 01:15:17 Shutter LASER close 01:15:17 Received message from Master: op=PointingHead serial=204587 01:15:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:15:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:15:18 Point started: ret=0 01:15:18 point_skyscan result=0 01:15:18 Check angles 01:15:18 SkyScan query 01:15:19 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.875<-21525 Statuses=0009 0009 01:15:19 Msec=0 True Az=136.41 Ze=-142.875 Az status=0009 Ze status=0009 01:15:19 Check angles 01:15:19 SkyScan query 01:15:20 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.92<-20128 Statuses=0009 0009 01:15:20 Msec=750 True Az=153.96 Ze=-121.92 Az status=0009 Ze status=0009 01:15:20 Check angles 01:15:20 SkyScan query 01:15:20 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.845<-18723 Statuses=0009 0009 01:15:20 Msec=1500 True Az=171.435 Ze=-100.845 Az status=0009 Ze status=0009 01:15:21 Check angles 01:15:21 SkyScan query 01:15:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.01<-17334 Statuses=0008 0009 01:15:21 Msec=2250 True Az=175.995 Ze=-80.01 Az status=0008 Ze status=0009 01:15:21 Check angles 01:15:21 SkyScan query 01:15:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.995<-15933 Statuses=0008 0009 01:15:22 Msec=3000 True Az=175.995 Ze=-58.995 Az status=0008 Ze status=0009 01:15:22 Check angles 01:15:22 SkyScan query 01:15:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:15:23 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:15:23 Message to Master queued w/err=0: serial=204587 error=0 01:15:27 Received message from Master: op=Identify serial=204588 01:15:28 Received message from Master: op=Filter serial=204591 01:15:28 Color wheel filter change from 0 to 0 01:15:28 FLIGetFilterPos err=0 currentPosition=0 01:15:28 FLIGetStepsRemaining err=0 RemainingSteps=0 01:15:28 Filter is already there-color wheel unchanged 01:15:28 Received message from Master: op=Shutter serial=204592 01:15:28 Shutter LASER close 01:15:28 Received message from Camera: op=State serial=204594 01:15:28 GetSingleValue result=40 Value=cccccccc 01:15:28 SkyScan query 01:15:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:15:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:29 Parameters OK 01:15:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 [UTC 2018-12-17 01:15:29] 01:15:29 Set A/D data flow result=40 01:15:29 Set A/D channel type result=40 01:15:29 Set A/D encoding result=40 01:15:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:29 Set channel filter=0.000000e+000 result=40 01:15:29 Config A/D Result=40 01:15:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:29 Get A/D filter: -9.255963e+061 result=40 01:15:29 Get A/D value=-858993460 result=40 01:15:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:15:29 Parameters OK 01:15:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:15:29 Set A/D data flow result=40 01:15:29 Set A/D channel type result=40 01:15:29 Set A/D encoding result=40 01:15:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:15:29 Set channel filter=0.000000e+000 result=40 01:15:29 Config A/D Result=40 01:15:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:15:29 Get A/D filter: -9.255963e+061 result=40 01:15:29 Get A/D value=-858993460 result=40 01:15:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:15:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:15:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:15:29 Aux= 01:15:29 Message to Camera, serial 204594 queued [UTC 2018-12-17 01:15:52] 01:16:05 Received message from Master: op=PointingHead serial=204607 01:16:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:16:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:16:06 Point started: ret=0 01:16:06 point_skyscan result=0 01:16:07 Check angles 01:16:07 SkyScan query 01:16:07 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.39<-13426 Statuses=0009 0009 01:16:07 Msec=0 True Az=152.79 Ze=-21.39 Az status=0009 Ze status=0009 01:16:07 Check angles 01:16:07 SkyScan query 01:16:08 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.465<-12031 Statuses=0009 0009 01:16:08 Msec=750 True Az=135.24 Ze=-0.465 Az status=0009 Ze status=0009 01:16:08 Check angles 01:16:08 SkyScan query 01:16:09 SkyScan query done: ret=0 az=117.615<-7841 ze=20.535<-10631 Statuses=0009 0009 01:16:09 Msec=1500 True Az=117.615 Ze=20.535 Az status=0009 Ze status=0009 01:16:09 Check angles 01:16:09 SkyScan query 01:16:09 SkyScan query done: ret=0 az=100.425<-6695 ze=41.46<-9236 Statuses=0009 0009 01:16:09 Msec=2250 True Az=100.425 Ze=41.46 Az status=0009 Ze status=0009 01:16:10 Check angles 01:16:10 SkyScan query 01:16:10 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 01:16:10 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 01:16:10 Check angles 01:16:10 SkyScan query 01:16:11 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 01:16:11 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 01:16:11 Message to Master queued w/err=0: serial=204607 error=0 01:16:16 Received message from Master: op=Filter serial=204608 01:16:16 Color wheel filter change from 0 to 0 01:16:16 FLIGetFilterPos err=0 currentPosition=0 01:16:16 FLIGetStepsRemaining err=0 RemainingSteps=0 01:16:16 Filter is already there-color wheel unchanged 01:16:16 Received message from Master: op=Shutter serial=204609 01:16:16 Shutter LASER close 01:16:16 Received message from Camera: op=State serial=204611 01:16:16 GetSingleValue result=40 Value=cccccccc 01:16:16 SkyScan query 01:16:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:16:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:17 Parameters OK 01:16:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:17 Set A/D data flow result=40 01:16:17 Set A/D channel type result=40 01:16:17 Set A/D encoding result=40 01:16:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:17 Set channel filter=0.000000e+000 result=40 01:16:17 Config A/D Result=40 01:16:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:17 Get A/D filter: -9.255963e+061 result=40 01:16:17 Get A/D value=-858993460 result=40 01:16:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:16:17 Parameters OK 01:16:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:16:17 Set A/D data flow result=40 01:16:17 Set A/D channel type result=40 01:16:17 Set A/D encoding result=40 01:16:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:16:17 Set channel filter=0.000000e+000 result=40 01:16:17 Config A/D Result=40 01:16:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:16:17 Get A/D filter: -9.255963e+061 result=40 01:16:17 Get A/D value=-858993460 result=40 01:16:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:16:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:16:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:16:17 Aux= 01:16:17 Message to Camera, serial 204611 queued 01:16:53 Received message from Master: op=PointingHead serial=204623 01:16:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:16:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:16:53 Point started: ret=0 01:16:53 point_skyscan result=0 01:16:54 Check angles 01:16:54 SkyScan query 01:16:54 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 01:16:54 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 01:16:55 Check angles 01:16:55 SkyScan query 01:16:55 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 01:16:55 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 01:16:55 Check angles 01:16:55 SkyScan query 01:16:56 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 01:16:56 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 01:16:56 Check angles 01:16:56 SkyScan query 01:16:57 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 01:16:57 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 01:16:57 Check angles 01:16:57 SkyScan query 01:16:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 01:16:57 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 01:16:58 Check angles 01:16:58 SkyScan query 01:16:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:16:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:16:58 Message to Master queued w/err=0: serial=204623 error=0 01:17:03 Received message from Master: op=Filter serial=204624 01:17:03 Color wheel filter change from 0 to 0 01:17:03 FLIGetFilterPos err=0 currentPosition=0 01:17:03 FLIGetStepsRemaining err=0 RemainingSteps=0 01:17:03 Filter is already there-color wheel unchanged 01:17:03 Received message from Master: op=Shutter serial=204625 01:17:03 Shutter LASER close 01:17:03 Received message from Camera: op=State serial=204627 01:17:03 GetSingleValue result=40 Value=cccccccc 01:17:03 SkyScan query 01:17:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:17:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:04 Parameters OK 01:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:04 Set A/D data flow result=40 01:17:04 Set A/D channel type result=40 01:17:04 Set A/D encoding result=40 01:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:04 Set channel filter=0.000000e+000 result=40 01:17:04 Config A/D Result=40 01:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:04 Get A/D filter: -9.255963e+061 result=40 01:17:04 Get A/D value=-858993460 result=40 01:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:04 Parameters OK 01:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:04 Set A/D data flow result=40 01:17:04 Set A/D channel type result=40 01:17:04 Set A/D encoding result=40 01:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:04 Set channel filter=0.000000e+000 result=40 01:17:04 Config A/D Result=40 01:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:04 Get A/D filter: -9.255963e+061 result=40 01:17:04 Get A/D value=-858993460 result=40 01:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:17:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:17:04 Aux= 01:17:04 Message to Camera, serial 204627 queued 01:17:41 Received message from Master: op=PointingHead serial=204640 01:17:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:17:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:17:42 Point started: ret=0 01:17:42 point_skyscan result=0 01:17:42 Check angles 01:17:42 SkyScan query 01:17:43 SkyScan query done: ret=0 az=152.94<-10196 ze=8.805<-11413 Statuses=0009 0009 01:17:43 Msec=0 True Az=152.94 Ze=8.805 Az status=0009 Ze status=0009 01:17:43 Check angles 01:17:43 SkyScan query 01:17:44 SkyScan query done: ret=0 az=135.585<-9039 ze=-12.225<-12815 Statuses=0009 0009 01:17:44 Msec=750 True Az=135.585 Ze=-12.225 Az status=0009 Ze status=0009 01:17:44 Check angles 01:17:44 SkyScan query 01:17:44 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.6<-14240 Statuses=0009 0009 01:17:44 Msec=1500 True Az=117.6 Ze=-33.6 Az status=0009 Ze status=0009 01:17:45 Check angles 01:17:45 SkyScan query 01:17:45 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.57<-15438 Statuses=0009 0009 01:17:45 Msec=2250 True Az=100.32 Ze=-51.57 Az status=0009 Ze status=0009 01:17:45 Check angles 01:17:45 SkyScan query 01:17:46 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 01:17:46 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 01:17:46 Check angles 01:17:46 SkyScan query 01:17:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:17:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:17:47 Message to Master queued w/err=0: serial=204640 error=0 01:17:52 Received message from Master: op=Filter serial=204641 01:17:52 Color wheel filter change from 0 to 0 01:17:52 FLIGetFilterPos err=0 currentPosition=0 01:17:52 FLIGetStepsRemaining err=0 RemainingSteps=0 01:17:52 Filter is already there-color wheel unchanged 01:17:52 Received message from Master: op=Shutter serial=204642 01:17:52 Shutter LASER close 01:17:52 Received message from Camera: op=State serial=204644 01:17:52 GetSingleValue result=40 Value=cccccccc 01:17:52 SkyScan query 01:17:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:17:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:53 Parameters OK 01:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:53 Set A/D data flow result=40 01:17:53 Set A/D channel type result=40 01:17:53 Set A/D encoding result=40 01:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:53 Set channel filter=0.000000e+000 result=40 01:17:53 Config A/D Result=40 01:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:53 Get A/D filter: -9.255963e+061 result=40 01:17:53 Get A/D value=-858993460 result=40 01:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:17:53 Parameters OK 01:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:17:53 Set A/D data flow result=40 01:17:53 Set A/D channel type result=40 01:17:53 Set A/D encoding result=40 01:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:17:53 Set channel filter=0.000000e+000 result=40 01:17:53 Config A/D Result=40 01:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:17:53 Get A/D filter: -9.255963e+061 result=40 01:17:53 Get A/D value=-858993460 result=40 01:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:17:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:17:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:17:53 Aux= 01:17:53 Message to Camera, serial 204644 queued 01:18:29 Received message from Master: op=PointingHead serial=204657 01:18:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:18:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:18:30 Point started: ret=0 01:18:30 point_skyscan result=0 01:18:30 Check angles 01:18:30 SkyScan query 01:18:31 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.63<-17442 Statuses=0009 0009 01:18:31 Msec=0 True Az=109.35 Ze=-81.63 Az status=0009 Ze status=0009 01:18:31 Check angles 01:18:31 SkyScan query 01:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 01:18:32 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 01:18:32 Check angles 01:18:32 SkyScan query 01:18:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.975<-20265 Statuses=0008 0009 01:18:33 Msec=1500 True Az=112.995 Ze=-123.975 Az status=0008 Ze status=0009 01:18:33 Check angles 01:18:33 SkyScan query 01:18:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 01:18:33 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 01:18:33 Check angles 01:18:33 SkyScan query 01:18:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.81<-23054 Statuses=0008 0009 01:18:34 Msec=3000 True Az=112.995 Ze=-165.81 Az status=0008 Ze status=0009 01:18:34 Check angles 01:18:34 SkyScan query 01:18:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:18:35 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:18:35 Message to Master queued w/err=0: serial=204657 error=0 01:18:40 Received message from Master: op=Filter serial=204658 01:18:40 Color wheel filter change from 0 to 0 01:18:40 FLIGetFilterPos err=0 currentPosition=0 01:18:40 FLIGetStepsRemaining err=0 RemainingSteps=0 01:18:40 Filter is already there-color wheel unchanged 01:18:40 Received message from Master: op=Shutter serial=204659 01:18:40 Shutter LASER open 01:18:40 Received message from Camera: op=State serial=204661 01:18:40 GetSingleValue result=40 Value=cccccccc 01:18:40 SkyScan query 01:18:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:18:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:41 Parameters OK 01:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:41 Set A/D data flow result=40 01:18:41 Set A/D channel type result=40 01:18:41 Set A/D encoding result=40 01:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:41 Set channel filter=0.000000e+000 result=40 01:18:41 Config A/D Result=40 01:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:41 Get A/D filter: -9.255963e+061 result=40 01:18:41 Get A/D value=-858993460 result=40 01:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:18:41 Parameters OK 01:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:18:41 Set A/D data flow result=40 01:18:41 Set A/D channel type result=40 01:18:41 Set A/D encoding result=40 01:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:18:41 Set channel filter=0.000000e+000 result=40 01:18:41 Config A/D Result=40 01:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:18:41 Get A/D filter: -9.255963e+061 result=40 01:18:41 Get A/D value=-858993460 result=40 01:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:18:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:18:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:18:41 Aux= 01:18:41 Message to Camera, serial 204661 queued 01:18:49 Received message from Master: op=Shutter serial=204671 01:18:49 Shutter LASER close 01:18:50 Received message from Master: op=PointingHead serial=204675 01:18:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:18:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:18:50 Point started: ret=0 01:18:50 point_skyscan result=0 01:18:51 Check angles 01:18:51 SkyScan query 01:18:51 SkyScan query done: ret=0 az=89.835<-5989 ze=157.275<-1515 Statuses=0009 0009 01:18:51 Msec=0 True Az=89.835 Ze=157.275 Az status=0009 Ze status=0009 01:18:51 Check angles 01:18:51 SkyScan query 01:18:52 SkyScan query done: ret=0 az=72.45<-4830 ze=136.32<-2912 Statuses=0009 0009 01:18:52 Msec=750 True Az=72.45 Ze=136.32 Az status=0009 Ze status=0009 01:18:52 Check angles 01:18:52 SkyScan query 01:18:53 SkyScan query done: ret=0 az=54.99<-3666 ze=115.41<-4306 Statuses=0009 0009 01:18:53 Msec=1500 True Az=54.99 Ze=115.41 Az status=0009 Ze status=0009 01:18:53 Check angles 01:18:53 SkyScan query 01:18:54 SkyScan query done: ret=0 az=40.995<-2733 ze=94.38<-5708 Statuses=0009 0009 01:18:54 Msec=2250 True Az=40.995 Ze=94.38 Az status=0009 Ze status=0009 01:18:54 Check angles 01:18:54 SkyScan query 01:18:54 SkyScan query done: ret=0 az=40.98<-2732 ze=73.455<-7103 Statuses=0008 0009 01:18:54 Msec=3000 True Az=40.98 Ze=73.455 Az status=0008 Ze status=0009 01:18:54 Check angles 01:18:54 SkyScan query 01:18:55 SkyScan query done: ret=0 az=40.98<-2732 ze=52.86<-8476 Statuses=0008 0009 01:18:55 Msec=3750 True Az=40.98 Ze=52.86 Az status=0008 Ze status=0009 01:18:55 Check angles 01:18:55 SkyScan query 01:18:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:18:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:18:56 Message to Master queued w/err=0: serial=204675 error=0 01:19:01 Received message from Master: op=Filter serial=204676 01:19:01 Color wheel filter change from 0 to 0 01:19:01 FLIGetFilterPos err=0 currentPosition=0 01:19:01 FLIGetStepsRemaining err=0 RemainingSteps=0 01:19:01 Filter is already there-color wheel unchanged 01:19:01 Received message from Master: op=Shutter serial=204677 01:19:01 Shutter LASER close 01:19:01 Received message from Camera: op=State serial=204679 01:19:01 GetSingleValue result=40 Value=cccccccc 01:19:01 SkyScan query 01:19:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:19:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:02 Parameters OK 01:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:02 Set A/D data flow result=40 01:19:02 Set A/D channel type result=40 01:19:02 Set A/D encoding result=40 01:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:02 Set channel filter=0.000000e+000 result=40 01:19:02 Config A/D Result=40 01:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:02 Get A/D filter: -9.255963e+061 result=40 01:19:02 Get A/D value=-858993460 result=40 01:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:02 Parameters OK 01:19:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:02 Set A/D data flow result=40 01:19:02 Set A/D channel type result=40 01:19:02 Set A/D encoding result=40 01:19:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:02 Set channel filter=0.000000e+000 result=40 01:19:02 Config A/D Result=40 01:19:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:02 Get A/D filter: -9.255963e+061 result=40 01:19:02 Get A/D value=-858993460 result=40 01:19:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:19:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:19:02 Aux= 01:19:02 Message to Camera, serial 204679 queued 01:19:38 Received message from Master: op=PointingHead serial=204692 01:19:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:19:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:19:39 Point started: ret=0 01:19:39 point_skyscan result=0 01:19:40 Check angles 01:19:40 SkyScan query 01:19:40 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 01:19:40 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 01:19:40 Check angles 01:19:40 SkyScan query 01:19:41 SkyScan query done: ret=0 az=81.63<-5442 ze=66.495<-7567 Statuses=0009 0008 01:19:41 Msec=750 True Az=81.63 Ze=66.495 Az status=0009 Ze status=0008 01:19:41 Check angles 01:19:41 SkyScan query 01:19:42 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 01:19:42 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 01:19:42 Check angles 01:19:42 SkyScan query 01:19:42 SkyScan query done: ret=0 az=116.94<-7796 ze=66.495<-7567 Statuses=0009 0008 01:19:42 Msec=2250 True Az=116.94 Ze=66.495 Az status=0009 Ze status=0008 01:19:43 Check angles 01:19:43 SkyScan query 01:19:43 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 01:19:43 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 01:19:43 Check angles 01:19:43 SkyScan query 01:19:44 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 01:19:44 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 01:19:44 Check angles 01:19:44 SkyScan query 01:19:45 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:19:45 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:19:45 Message to Master queued w/err=0: serial=204692 error=0 01:19:50 Received message from Master: op=Filter serial=204693 01:19:50 Color wheel filter change from 0 to 0 01:19:50 FLIGetFilterPos err=0 currentPosition=0 01:19:50 FLIGetStepsRemaining err=0 RemainingSteps=0 01:19:50 Filter is already there-color wheel unchanged 01:19:50 Received message from Master: op=Shutter serial=204694 01:19:50 Shutter LASER close 01:19:50 Received message from Camera: op=State serial=204696 01:19:50 GetSingleValue result=40 Value=cccccccc 01:19:50 SkyScan query 01:19:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:19:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:51 Parameters OK 01:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:51 Set A/D data flow result=40 01:19:51 Set A/D channel type result=40 01:19:51 Set A/D encoding result=40 01:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:51 Set channel filter=0.000000e+000 result=40 01:19:51 Config A/D Result=40 01:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:51 Get A/D filter: -9.255963e+061 result=40 01:19:51 Get A/D value=-858993460 result=40 01:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:19:51 Parameters OK 01:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:19:51 Set A/D data flow result=40 01:19:51 Set A/D channel type result=40 01:19:51 Set A/D encoding result=40 01:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:19:51 Set channel filter=0.000000e+000 result=40 01:19:51 Config A/D Result=40 01:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:19:51 Get A/D filter: -9.255963e+061 result=40 01:19:51 Get A/D value=-858993460 result=40 01:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:19:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:19:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:19:51 Aux= 01:19:51 Message to Camera, serial 204696 queued 01:20:27 Received message from Master: op=PointingHead serial=204709 01:20:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:20:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:20:28 Point started: ret=0 01:20:28 point_skyscan result=0 01:20:28 Check angles 01:20:28 SkyScan query 01:20:29 SkyScan query done: ret=0 az=134.715<-8981 ze=36.375<-9575 Statuses=0009 0009 01:20:29 Msec=0 True Az=134.715 Ze=36.375 Az status=0009 Ze status=0009 01:20:29 Check angles 01:20:29 SkyScan query 01:20:30 SkyScan query done: ret=0 az=117.255<-7817 ze=15.45<-10970 Statuses=0009 0009 01:20:30 Msec=750 True Az=117.255 Ze=15.45 Az status=0009 Ze status=0009 01:20:30 Check angles 01:20:30 SkyScan query 01:20:31 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.55<-12370 Statuses=0009 0009 01:20:31 Msec=1500 True Az=99.93 Ze=-5.55 Az status=0009 Ze status=0009 01:20:31 Check angles 01:20:31 SkyScan query 01:20:31 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.52<-13768 Statuses=0009 0009 01:20:31 Msec=2250 True Az=82.335 Ze=-26.52 Az status=0009 Ze status=0009 01:20:31 Check angles 01:20:31 SkyScan query 01:20:32 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.595<-14573 Statuses=0009 0008 01:20:32 Msec=3000 True Az=64.755 Ze=-38.595 Az status=0009 Ze status=0008 01:20:32 Check angles 01:20:32 SkyScan query 01:20:33 SkyScan query done: ret=0 az=47.43<-3162 ze=-38.52<-14568 Statuses=0009 0008 01:20:33 Msec=3750 True Az=47.43 Ze=-38.52 Az status=0009 Ze status=0008 01:20:33 Check angles 01:20:33 SkyScan query 01:20:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:20:34 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:20:34 Message to Master queued w/err=0: serial=204709 error=0 01:20:39 Received message from Master: op=Filter serial=204710 01:20:39 Color wheel filter change from 0 to 0 01:20:39 FLIGetFilterPos err=0 currentPosition=0 01:20:39 FLIGetStepsRemaining err=0 RemainingSteps=0 01:20:39 Filter is already there-color wheel unchanged 01:20:39 Received message from Master: op=Shutter serial=204711 01:20:39 Shutter LASER close 01:20:39 Received message from Camera: op=State serial=204713 01:20:39 GetSingleValue result=40 Value=cccccccc 01:20:39 SkyScan query 01:20:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:20:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:39 Parameters OK 01:20:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:39 Set A/D data flow result=40 01:20:39 Set A/D channel type result=40 01:20:39 Set A/D encoding result=40 01:20:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:39 Set channel filter=0.000000e+000 result=40 01:20:39 Config A/D Result=40 01:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:39 Get A/D filter: -9.255963e+061 result=40 01:20:39 Get A/D value=-858993460 result=40 01:20:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:20:39 Parameters OK 01:20:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:20:39 Set A/D data flow result=40 01:20:39 Set A/D channel type result=40 01:20:39 Set A/D encoding result=40 01:20:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:20:39 Set channel filter=0.000000e+000 result=40 01:20:39 Config A/D Result=40 01:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:20:39 Get A/D filter: -9.255963e+061 result=40 01:20:39 Get A/D value=-858993460 result=40 01:20:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:20:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:20:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:20:39 Aux= 01:20:39 Message to Camera, serial 204713 queued 01:21:16 Received message from Master: op=PointingHead serial=204726 01:21:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:21:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:21:17 Point started: ret=0 01:21:17 point_skyscan result=0 01:21:17 Check angles 01:21:17 SkyScan query 01:21:18 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.55<-16570 Statuses=0009 0009 01:21:18 Msec=0 True Az=64.185 Ze=-68.55 Az status=0009 Ze status=0009 01:21:18 Check angles 01:21:18 SkyScan query 01:21:19 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.52<-17968 Statuses=0009 0009 01:21:19 Msec=750 True Az=81.6 Ze=-89.52 Az status=0009 Ze status=0009 01:21:19 Check angles 01:21:19 SkyScan query 01:21:19 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.46<-19364 Statuses=0009 0009 01:21:19 Msec=1500 True Az=99.15 Ze=-110.46 Az status=0009 Ze status=0009 01:21:20 Check angles 01:21:20 SkyScan query 01:21:20 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.4<-20760 Statuses=0009 0009 01:21:20 Msec=2250 True Az=116.625 Ze=-131.4 Az status=0009 Ze status=0009 01:21:20 Check angles 01:21:20 SkyScan query 01:21:21 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.57<-21438 Statuses=0009 0008 01:21:21 Msec=3000 True Az=131.025 Ze=-141.57 Az status=0009 Ze status=0008 01:21:21 Check angles 01:21:21 SkyScan query 01:21:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 01:21:22 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 01:21:22 Message to Master queued w/err=0: serial=204726 error=0 01:21:27 Received message from Master: op=Filter serial=204727 01:21:27 Color wheel filter change from 0 to 0 01:21:27 FLIGetFilterPos err=0 currentPosition=0 01:21:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:21:27 Filter is already there-color wheel unchanged 01:21:27 Received message from Master: op=Shutter serial=204728 01:21:27 Shutter LASER close 01:21:27 Received message from Camera: op=State serial=204730 01:21:27 GetSingleValue result=40 Value=cccccccc 01:21:27 SkyScan query 01:21:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:21:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:27 Parameters OK 01:21:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:27 Set A/D data flow result=40 01:21:27 Set A/D channel type result=40 01:21:27 Set A/D encoding result=40 01:21:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:27 Set channel filter=0.000000e+000 result=40 01:21:27 Config A/D Result=40 01:21:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:27 Get A/D filter: -9.255963e+061 result=40 01:21:27 Get A/D value=-858993460 result=40 01:21:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:21:27 Parameters OK 01:21:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:21:27 Set A/D data flow result=40 01:21:27 Set A/D channel type result=40 01:21:27 Set A/D encoding result=40 01:21:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:21:27 Set channel filter=0.000000e+000 result=40 01:21:27 Config A/D Result=40 01:21:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:21:27 Get A/D filter: -9.255963e+061 result=40 01:21:27 Get A/D value=-858993460 result=40 01:21:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:21:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:21:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:21:27 Aux= 01:21:27 Message to Camera, serial 204730 queued 01:22:04 Received message from Master: op=PointingHead serial=204743 01:22:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:22:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:22:05 Point started: ret=0 01:22:05 point_skyscan result=0 01:22:05 Check angles 01:22:05 SkyScan query 01:22:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0009 0009 01:22:06 Msec=0 True Az=112.995 Ze=-171.3 Az status=0009 Ze status=0009 01:22:06 Check angles 01:22:06 SkyScan query 01:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:22:07 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:22:07 Message to Master queued w/err=0: serial=204743 error=0 01:22:12 Received message from Master: op=Filter serial=204744 01:22:12 Color wheel filter change from 0 to 0 01:22:12 FLIGetFilterPos err=0 currentPosition=0 01:22:12 FLIGetStepsRemaining err=0 RemainingSteps=0 01:22:12 Filter is already there-color wheel unchanged 01:22:12 Received message from Master: op=Shutter serial=204745 01:22:12 Shutter LASER open 01:22:12 Received message from Camera: op=State serial=204747 01:22:12 GetSingleValue result=40 Value=cccccccc 01:22:12 SkyScan query 01:22:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:22:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:13 Parameters OK 01:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:13 Set A/D data flow result=40 01:22:13 Set A/D channel type result=40 01:22:13 Set A/D encoding result=40 01:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:13 Set channel filter=0.000000e+000 result=40 01:22:13 Config A/D Result=40 01:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:13 Get A/D filter: -9.255963e+061 result=40 01:22:13 Get A/D value=-858993460 result=40 01:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:13 Parameters OK 01:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:13 Set A/D data flow result=40 01:22:13 Set A/D channel type result=40 01:22:13 Set A/D encoding result=40 01:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:13 Set channel filter=0.000000e+000 result=40 01:22:13 Config A/D Result=40 01:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:13 Get A/D filter: -9.255963e+061 result=40 01:22:13 Get A/D value=-858993460 result=40 01:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:22:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:22:13 Aux= 01:22:13 Message to Camera, serial 204747 queued 01:22:21 Received message from Master: op=Shutter serial=204757 01:22:21 Shutter LASER close 01:22:22 Received message from Master: op=PointingHead serial=204761 01:22:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:22:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:22:22 Point started: ret=0 01:22:22 point_skyscan result=0 01:22:23 Check angles 01:22:23 SkyScan query 01:22:23 SkyScan query done: ret=0 az=136.08<-9072 ze=-143.34<-21556 Statuses=0009 0009 01:22:23 Msec=0 True Az=136.08 Ze=-143.34 Az status=0009 Ze status=0009 01:22:24 Check angles 01:22:24 SkyScan query 01:22:24 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.89<-20126 Statuses=0009 0009 01:22:24 Msec=750 True Az=153.9 Ze=-121.89 Az status=0009 Ze status=0009 01:22:24 Check angles 01:22:24 SkyScan query 01:22:25 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.89<-18726 Statuses=0009 0009 01:22:25 Msec=1500 True Az=171.495 Ze=-100.89 Az status=0009 Ze status=0009 01:22:25 Check angles 01:22:25 SkyScan query 01:22:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 01:22:26 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 01:22:26 Check angles 01:22:26 SkyScan query 01:22:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.995<-15933 Statuses=0008 0009 01:22:26 Msec=3000 True Az=175.995 Ze=-58.995 Az status=0008 Ze status=0009 01:22:27 Check angles 01:22:27 SkyScan query 01:22:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:22:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:22:27 Message to Master queued w/err=0: serial=204761 error=0 01:22:32 Received message from Master: op=Filter serial=204762 01:22:32 Color wheel filter change from 0 to 0 01:22:32 FLIGetFilterPos err=0 currentPosition=0 01:22:32 FLIGetStepsRemaining err=0 RemainingSteps=0 01:22:32 Filter is already there-color wheel unchanged 01:22:32 Received message from Master: op=Shutter serial=204763 01:22:32 Shutter LASER close 01:22:32 Received message from Camera: op=State serial=204765 01:22:32 GetSingleValue result=40 Value=cccccccc 01:22:32 SkyScan query 01:22:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:22:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:33 Parameters OK 01:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:33 Set A/D data flow result=40 01:22:33 Set A/D channel type result=40 01:22:33 Set A/D encoding result=40 01:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:33 Set channel filter=0.000000e+000 result=40 01:22:33 Config A/D Result=40 01:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:33 Get A/D filter: -9.255963e+061 result=40 01:22:33 Get A/D value=-858993460 result=40 01:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:22:33 Parameters OK 01:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:22:33 Set A/D data flow result=40 01:22:33 Set A/D channel type result=40 01:22:33 Set A/D encoding result=40 01:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:22:33 Set channel filter=0.000000e+000 result=40 01:22:33 Config A/D Result=40 01:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:22:33 Get A/D filter: -9.255963e+061 result=40 01:22:33 Get A/D value=-858993460 result=40 01:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:22:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:22:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:22:33 Aux= 01:22:33 Message to Camera, serial 204765 queued 01:23:10 Received message from Master: op=PointingHead serial=204778 01:23:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:23:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:23:10 Point started: ret=0 01:23:10 point_skyscan result=0 01:23:11 Check angles 01:23:11 SkyScan query 01:23:12 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.51<-13434 Statuses=0009 0009 01:23:12 Msec=0 True Az=152.775 Ze=-21.51 Az status=0009 Ze status=0009 01:23:12 Check angles 01:23:12 SkyScan query 01:23:12 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.555<-12037 Statuses=0009 0009 01:23:12 Msec=750 True Az=135.405 Ze=-0.555 Az status=0009 Ze status=0009 01:23:12 Check angles 01:23:12 SkyScan query 01:23:13 SkyScan query done: ret=0 az=117.78<-7852 ze=20.385<-10641 Statuses=0009 0009 01:23:13 Msec=1500 True Az=117.78 Ze=20.385 Az status=0009 Ze status=0009 01:23:13 Check angles 01:23:13 SkyScan query 01:23:14 SkyScan query done: ret=0 az=100.455<-6697 ze=41.37<-9242 Statuses=0009 0009 01:23:14 Msec=2250 True Az=100.455 Ze=41.37 Az status=0009 Ze status=0009 01:23:14 Check angles 01:23:14 SkyScan query 01:23:15 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 01:23:15 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 01:23:15 Check angles 01:23:15 SkyScan query 01:23:15 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 01:23:15 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 01:23:15 Message to Master queued w/err=0: serial=204778 error=0 01:23:20 Received message from Master: op=Filter serial=204779 01:23:20 Color wheel filter change from 0 to 0 01:23:20 FLIGetFilterPos err=0 currentPosition=0 01:23:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:23:20 Filter is already there-color wheel unchanged 01:23:20 Received message from Master: op=Shutter serial=204780 01:23:20 Shutter LASER close 01:23:21 Received message from Camera: op=State serial=204782 01:23:21 GetSingleValue result=40 Value=cccccccc 01:23:21 SkyScan query 01:23:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:23:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:21 Parameters OK 01:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:21 Set A/D data flow result=40 01:23:21 Set A/D channel type result=40 01:23:21 Set A/D encoding result=40 01:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:21 Set channel filter=0.000000e+000 result=40 01:23:21 Config A/D Result=40 01:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:21 Get A/D filter: -9.255963e+061 result=40 01:23:21 Get A/D value=-858993460 result=40 01:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:23:21 Parameters OK 01:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:23:21 Set A/D data flow result=40 01:23:21 Set A/D channel type result=40 01:23:21 Set A/D encoding result=40 01:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:23:21 Set channel filter=0.000000e+000 result=40 01:23:21 Config A/D Result=40 01:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:23:21 Get A/D filter: -9.255963e+061 result=40 01:23:21 Get A/D value=-858993460 result=40 01:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:23:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:23:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:23:21 Aux= 01:23:21 Message to Camera, serial 204782 queued 01:23:58 Received message from Master: op=PointingHead serial=204795 01:23:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:23:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:23:58 Point started: ret=0 01:23:58 point_skyscan result=0 01:23:59 Check angles 01:23:59 SkyScan query 01:24:00 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 01:24:00 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 01:24:00 Check angles 01:24:00 SkyScan query 01:24:00 SkyScan query done: ret=0 az=126.93<-8462 ze=38.505<-9433 Statuses=0009 0008 01:24:00 Msec=750 True Az=126.93 Ze=38.505 Az status=0009 Ze status=0008 01:24:01 Check angles 01:24:01 SkyScan query 01:24:01 SkyScan query done: ret=0 az=144.48<-9632 ze=38.505<-9433 Statuses=0009 0008 01:24:01 Msec=1500 True Az=144.48 Ze=38.505 Az status=0009 Ze status=0008 01:24:01 Check angles 01:24:01 SkyScan query 01:24:02 SkyScan query done: ret=0 az=161.805<-10787 ze=38.505<-9433 Statuses=0009 0008 01:24:02 Msec=2250 True Az=161.805 Ze=38.505 Az status=0009 Ze status=0008 01:24:02 Check angles 01:24:02 SkyScan query 01:24:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:24:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:24:03 Check angles 01:24:03 SkyScan query 01:24:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:24:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:24:03 Message to Master queued w/err=0: serial=204795 error=0 01:24:08 Received message from Master: op=Filter serial=204796 01:24:08 Color wheel filter change from 0 to 0 01:24:08 FLIGetFilterPos err=0 currentPosition=0 01:24:08 FLIGetStepsRemaining err=0 RemainingSteps=0 01:24:08 Filter is already there-color wheel unchanged 01:24:09 Received message from Master: op=Shutter serial=204797 01:24:09 Shutter LASER close 01:24:09 Received message from Camera: op=State serial=204799 01:24:09 GetSingleValue result=40 Value=cccccccc 01:24:09 SkyScan query 01:24:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:24:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:09 Parameters OK 01:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:09 Set A/D data flow result=40 01:24:09 Set A/D channel type result=40 01:24:09 Set A/D encoding result=40 01:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:09 Set channel filter=0.000000e+000 result=40 01:24:09 Config A/D Result=40 01:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:09 Get A/D filter: -9.255963e+061 result=40 01:24:09 Get A/D value=-858993460 result=40 01:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:09 Parameters OK 01:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:09 Set A/D data flow result=40 01:24:09 Set A/D channel type result=40 01:24:09 Set A/D encoding result=40 01:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:09 Set channel filter=0.000000e+000 result=40 01:24:09 Config A/D Result=40 01:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:09 Get A/D filter: -9.255963e+061 result=40 01:24:09 Get A/D value=-858993460 result=40 01:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:24:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:24:09 Aux= 01:24:09 Message to Camera, serial 204799 queued 01:24:46 Received message from Master: op=PointingHead serial=204812 01:24:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:24:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:24:46 Point started: ret=0 01:24:46 point_skyscan result=0 01:24:47 Check angles 01:24:47 SkyScan query 01:24:48 SkyScan query done: ret=0 az=153.27<-10218 ze=9.06<-11396 Statuses=0009 0009 01:24:48 Msec=0 True Az=153.27 Ze=9.06 Az status=0009 Ze status=0009 01:24:48 Check angles 01:24:48 SkyScan query 01:24:48 SkyScan query done: ret=0 az=135.9<-9060 ze=-12<-12800 Statuses=0009 0009 01:24:48 Msec=750 True Az=135.9 Ze=-12 Az status=0009 Ze status=0009 01:24:49 Check angles 01:24:49 SkyScan query 01:24:49 SkyScan query done: ret=0 az=118.275<-7885 ze=-32.85<-14190 Statuses=0009 0009 01:24:49 Msec=1500 True Az=118.275 Ze=-32.85 Az status=0009 Ze status=0009 01:24:49 Check angles 01:24:49 SkyScan query 01:24:50 SkyScan query done: ret=0 az=100.89<-6726 ze=-51.51<-15434 Statuses=0009 0009 01:24:50 Msec=2250 True Az=100.89 Ze=-51.51 Az status=0009 Ze status=0009 01:24:50 Check angles 01:24:50 SkyScan query 01:24:51 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 01:24:51 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 01:24:51 Check angles 01:24:51 SkyScan query 01:24:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:24:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:24:51 Message to Master queued w/err=0: serial=204812 error=0 01:24:56 Received message from Master: op=Filter serial=204813 01:24:56 Color wheel filter change from 0 to 0 01:24:56 FLIGetFilterPos err=0 currentPosition=0 01:24:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:24:56 Filter is already there-color wheel unchanged 01:24:57 Received message from Master: op=Shutter serial=204814 01:24:57 Shutter LASER close 01:24:57 Received message from Camera: op=State serial=204816 01:24:57 GetSingleValue result=40 Value=cccccccc 01:24:57 SkyScan query 01:24:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:24:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:57 Parameters OK 01:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:57 Set A/D data flow result=40 01:24:57 Set A/D channel type result=40 01:24:57 Set A/D encoding result=40 01:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:57 Set channel filter=0.000000e+000 result=40 01:24:57 Config A/D Result=40 01:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:57 Get A/D filter: -9.255963e+061 result=40 01:24:57 Get A/D value=-858993460 result=40 01:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:24:57 Parameters OK 01:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:24:57 Set A/D data flow result=40 01:24:57 Set A/D channel type result=40 01:24:57 Set A/D encoding result=40 01:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:24:57 Set channel filter=0.000000e+000 result=40 01:24:57 Config A/D Result=40 01:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:24:57 Get A/D filter: -9.255963e+061 result=40 01:24:57 Get A/D value=-858993460 result=40 01:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:24:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:24:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:24:57 Aux= 01:24:57 Message to Camera, serial 204816 queued 01:25:34 Received message from Master: op=PointingHead serial=204829 01:25:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:25:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:25:34 Point started: ret=0 01:25:34 point_skyscan result=0 01:25:35 Check angles 01:25:35 SkyScan query 01:25:36 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.705<-17447 Statuses=0009 0009 01:25:36 Msec=0 True Az=109.335 Ze=-81.705 Az status=0009 Ze status=0009 01:25:36 Check angles 01:25:36 SkyScan query 01:25:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 01:25:37 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 01:25:37 Check angles 01:25:37 SkyScan query 01:25:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 01:25:37 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 01:25:37 Check angles 01:25:37 SkyScan query 01:25:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 01:25:38 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 01:25:38 Check angles 01:25:38 SkyScan query 01:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.48<-23032 Statuses=0008 0009 01:25:39 Msec=3000 True Az=112.995 Ze=-165.48 Az status=0008 Ze status=0009 01:25:39 Check angles 01:25:39 SkyScan query 01:25:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:25:40 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:25:40 Message to Master queued w/err=0: serial=204829 error=0 01:25:45 Received message from Master: op=Filter serial=204830 01:25:45 Color wheel filter change from 0 to 0 01:25:45 FLIGetFilterPos err=0 currentPosition=0 01:25:45 FLIGetStepsRemaining err=0 RemainingSteps=0 01:25:45 Filter is already there-color wheel unchanged 01:25:45 Received message from Master: op=Shutter serial=204831 01:25:45 Shutter LASER open 01:25:45 Received message from Camera: op=State serial=204833 01:25:45 GetSingleValue result=40 Value=cccccccc 01:25:45 SkyScan query 01:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:25:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:45 Parameters OK 01:25:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:45 Set A/D data flow result=40 01:25:45 Set A/D channel type result=40 01:25:45 Set A/D encoding result=40 01:25:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:45 Set channel filter=0.000000e+000 result=40 01:25:45 Config A/D Result=40 01:25:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:45 Get A/D filter: -9.255963e+061 result=40 01:25:45 Get A/D value=-858993460 result=40 01:25:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:25:45 Parameters OK 01:25:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:25:45 Set A/D data flow result=40 01:25:45 Set A/D channel type result=40 01:25:45 Set A/D encoding result=40 01:25:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:25:45 Set channel filter=0.000000e+000 result=40 01:25:45 Config A/D Result=40 01:25:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:25:45 Get A/D filter: -9.255963e+061 result=40 01:25:45 Get A/D value=-858993460 result=40 01:25:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:25:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:25:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:25:45 Aux= 01:25:45 Message to Camera, serial 204833 queued 01:25:54 Received message from Master: op=Shutter serial=204843 01:25:54 Shutter LASER close 01:25:54 Received message from Master: op=PointingHead serial=204847 01:25:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:25:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-17 01:25:55] 01:25:55 Point started: ret=0 01:25:55 point_skyscan result=0 01:25:56 Check angles 01:25:56 SkyScan query 01:25:56 SkyScan query done: ret=0 az=88.47<-5898 ze=155.58<-1628 Statuses=0009 0009 01:25:56 Msec=0 True Az=88.47 Ze=155.58 Az status=0009 Ze status=0009 01:25:56 Check angles 01:25:56 SkyScan query 01:25:57 SkyScan query done: ret=0 az=70.725<-4715 ze=134.205<-3053 Statuses=0009 0009 01:25:57 Msec=750 True Az=70.725 Ze=134.205 Az status=0009 Ze status=0009 01:25:57 Check angles 01:25:57 SkyScan query 01:25:58 SkyScan query done: ret=0 az=53.1<-3540 ze=113.25<-4450 Statuses=0009 0009 01:25:58 Msec=1500 True Az=53.1 Ze=113.25 Az status=0009 Ze status=0009 01:25:58 Check angles 01:25:58 SkyScan query 01:25:58 SkyScan query done: ret=0 az=40.95<-2730 ze=92.25<-5850 Statuses=0009 0009 01:25:58 Msec=2250 True Az=40.95 Ze=92.25 Az status=0009 Ze status=0009 01:25:59 Check angles 01:25:59 SkyScan query 01:25:59 SkyScan query done: ret=0 az=40.98<-2732 ze=71.31<-7246 Statuses=0008 0009 01:25:59 Msec=3000 True Az=40.98 Ze=71.31 Az status=0008 Ze status=0009 01:25:59 Check angles 01:25:59 SkyScan query 01:26:00 SkyScan query done: ret=0 az=40.98<-2732 ze=51.825<-8545 Statuses=0008 0009 01:26:00 Msec=3750 True Az=40.98 Ze=51.825 Az status=0008 Ze status=0009 01:26:00 Check angles 01:26:00 SkyScan query 01:26:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:26:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:26:01 Message to Master queued w/err=0: serial=204847 error=0 01:26:06 Received message from Master: op=Filter serial=204848 01:26:06 Color wheel filter change from 0 to 0 01:26:06 FLIGetFilterPos err=0 currentPosition=0 01:26:06 FLIGetStepsRemaining err=0 RemainingSteps=0 01:26:06 Filter is already there-color wheel unchanged 01:26:06 Received message from Master: op=Shutter serial=204849 01:26:06 Shutter LASER close 01:26:06 Received message from Camera: op=State serial=204851 01:26:06 GetSingleValue result=40 Value=cccccccc 01:26:06 SkyScan query 01:26:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:26:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:07 Parameters OK 01:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:07 Set A/D data flow result=40 01:26:07 Set A/D channel type result=40 01:26:07 Set A/D encoding result=40 01:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:07 Set channel filter=0.000000e+000 result=40 01:26:07 Config A/D Result=40 01:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:07 Get A/D filter: -9.255963e+061 result=40 01:26:07 Get A/D value=-858993460 result=40 01:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:07 Parameters OK 01:26:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:07 Set A/D data flow result=40 01:26:07 Set A/D channel type result=40 01:26:07 Set A/D encoding result=40 01:26:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:07 Set channel filter=0.000000e+000 result=40 01:26:07 Config A/D Result=40 01:26:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:07 Get A/D filter: -9.255963e+061 result=40 01:26:07 Get A/D value=-858993460 result=40 01:26:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:26:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:26:07 Aux= 01:26:07 Message to Camera, serial 204851 queued 01:26:42 Received message from Master: op=PointingHead serial=204863 01:26:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 01:26:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 01:26:43 Point started: ret=0 01:26:43 point_skyscan result=0 01:26:44 Check angles 01:26:44 SkyScan query 01:26:44 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 01:26:44 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 01:26:44 Check angles 01:26:44 SkyScan query 01:26:45 SkyScan query done: ret=0 az=81.615<-5441 ze=66.51<-7566 Statuses=0009 0008 01:26:45 Msec=750 True Az=81.615 Ze=66.51 Az status=0009 Ze status=0008 01:26:45 Check angles 01:26:45 SkyScan query 01:26:46 SkyScan query done: ret=0 az=99.015<-6601 ze=66.495<-7567 Statuses=0009 0008 01:26:46 Msec=1500 True Az=99.015 Ze=66.495 Az status=0009 Ze status=0008 01:26:46 Check angles 01:26:46 SkyScan query 01:26:46 SkyScan query done: ret=0 az=116.85<-7790 ze=66.495<-7567 Statuses=0009 0008 01:26:46 Msec=2250 True Az=116.85 Ze=66.495 Az status=0009 Ze status=0008 01:26:47 Check angles 01:26:47 SkyScan query 01:26:47 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 01:26:47 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 01:26:47 Check angles 01:26:47 SkyScan query 01:26:48 SkyScan query done: ret=0 az=151.695<-10113 ze=66.495<-7567 Statuses=0009 0008 01:26:48 Msec=3750 True Az=151.695 Ze=66.495 Az status=0009 Ze status=0008 01:26:48 Check angles 01:26:48 SkyScan query 01:26:49 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 01:26:49 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 01:26:49 Message to Master queued w/err=0: serial=204863 error=0 01:26:54 Received message from Master: op=Filter serial=204864 01:26:54 Color wheel filter change from 0 to 0 01:26:54 FLIGetFilterPos err=0 currentPosition=0 01:26:54 FLIGetStepsRemaining err=0 RemainingSteps=0 01:26:54 Filter is already there-color wheel unchanged 01:26:54 Received message from Master: op=Shutter serial=204865 01:26:54 Shutter LASER close 01:26:54 Received message from Camera: op=State serial=204867 01:26:54 GetSingleValue result=40 Value=cccccccc 01:26:54 SkyScan query 01:26:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 01:26:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:54 Parameters OK 01:26:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:54 Set A/D data flow result=40 01:26:54 Set A/D channel type result=40 01:26:54 Set A/D encoding result=40 01:26:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:54 Set channel filter=0.000000e+000 result=40 01:26:54 Config A/D Result=40 01:26:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:54 Get A/D filter: -9.255963e+061 result=40 01:26:54 Get A/D value=-858993460 result=40 01:26:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:26:54 Parameters OK 01:26:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:26:54 Set A/D data flow result=40 01:26:54 Set A/D channel type result=40 01:26:54 Set A/D encoding result=40 01:26:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:26:54 Set channel filter=0.000000e+000 result=40 01:26:54 Config A/D Result=40 01:26:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:26:54 Get A/D filter: -9.255963e+061 result=40 01:26:54 Get A/D value=-858993460 result=40 01:26:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:26:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:26:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:26:54 Aux= 01:26:54 Message to Camera, serial 204867 queued 01:27:31 Received message from Master: op=PointingHead serial=204880 01:27:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:27:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:27:32 Point started: ret=0 01:27:32 point_skyscan result=0 01:27:32 Check angles 01:27:32 SkyScan query 01:27:33 SkyScan query done: ret=0 az=135.15<-9010 ze=36.855<-9543 Statuses=0009 0009 01:27:33 Msec=0 True Az=135.15 Ze=36.855 Az status=0009 Ze status=0009 01:27:33 Check angles 01:27:33 SkyScan query 01:27:34 SkyScan query done: ret=0 az=117.615<-7841 ze=15.9<-10940 Statuses=0009 0009 01:27:34 Msec=750 True Az=117.615 Ze=15.9 Az status=0009 Ze status=0009 01:27:34 Check angles 01:27:34 SkyScan query 01:27:34 SkyScan query done: ret=0 az=100.275<-6685 ze=-5.04<-12336 Statuses=0009 0009 01:27:34 Msec=1500 True Az=100.275 Ze=-5.04 Az status=0009 Ze status=0009 01:27:35 Check angles 01:27:35 SkyScan query 01:27:35 SkyScan query done: ret=0 az=82.725<-5515 ze=-26.01<-13734 Statuses=0009 0009 01:27:35 Msec=2250 True Az=82.725 Ze=-26.01 Az status=0009 Ze status=0009 01:27:35 Check angles 01:27:35 SkyScan query 01:27:36 SkyScan query done: ret=0 az=65.34<-4356 ze=-38.595<-14573 Statuses=0009 0008 01:27:36 Msec=3000 True Az=65.34 Ze=-38.595 Az status=0009 Ze status=0008 01:27:36 Check angles 01:27:36 SkyScan query 01:27:37 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.52<-14568 Statuses=0009 0008 01:27:37 Msec=3750 True Az=47.355 Ze=-38.52 Az status=0009 Ze status=0008 01:27:37 Check angles 01:27:37 SkyScan query 01:27:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:27:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 01:27:37 Message to Master queued w/err=0: serial=204880 error=0 01:27:42 Received message from Master: op=Filter serial=204881 01:27:42 Color wheel filter change from 0 to 0 01:27:42 FLIGetFilterPos err=0 currentPosition=0 01:27:42 FLIGetStepsRemaining err=0 RemainingSteps=0 01:27:42 Filter is already there-color wheel unchanged 01:27:43 Received message from Master: op=Shutter serial=204882 01:27:43 Shutter LASER close 01:27:43 Received message from Camera: op=State serial=204884 01:27:43 GetSingleValue result=40 Value=cccccccc 01:27:43 SkyScan query 01:27:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:27:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:43 Parameters OK 01:27:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:43 Set A/D data flow result=40 01:27:43 Set A/D channel type result=40 01:27:43 Set A/D encoding result=40 01:27:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:43 Set channel filter=0.000000e+000 result=40 01:27:43 Config A/D Result=40 01:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:43 Get A/D filter: -9.255963e+061 result=40 01:27:43 Get A/D value=-858993460 result=40 01:27:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:27:43 Parameters OK 01:27:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:27:43 Set A/D data flow result=40 01:27:43 Set A/D channel type result=40 01:27:43 Set A/D encoding result=40 01:27:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:27:43 Set channel filter=0.000000e+000 result=40 01:27:43 Config A/D Result=40 01:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:27:43 Get A/D filter: -9.255963e+061 result=40 01:27:43 Get A/D value=-858993460 result=40 01:27:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:27:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:27:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:27:43 Aux= 01:27:43 Message to Camera, serial 204884 queued 01:28:20 Received message from Master: op=PointingHead serial=204897 01:28:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:28:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:28:20 Point started: ret=0 01:28:20 point_skyscan result=0 01:28:21 Check angles 01:28:21 SkyScan query 01:28:22 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.085<-16539 Statuses=0009 0009 01:28:22 Msec=0 True Az=63.825 Ze=-68.085 Az status=0009 Ze status=0009 01:28:22 Check angles 01:28:22 SkyScan query 01:28:22 SkyScan query done: ret=0 az=81.18<-5412 ze=-89.07<-17938 Statuses=0009 0009 01:28:22 Msec=750 True Az=81.18 Ze=-89.07 Az status=0009 Ze status=0009 01:28:23 Check angles 01:28:23 SkyScan query 01:28:23 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.46<-19364 Statuses=0009 0009 01:28:23 Msec=1500 True Az=99.105 Ze=-110.46 Az status=0009 Ze status=0009 01:28:23 Check angles 01:28:23 SkyScan query 01:28:24 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.4<-20760 Statuses=0009 0009 01:28:24 Msec=2250 True Az=116.52 Ze=-131.4 Az status=0009 Ze status=0009 01:28:24 Check angles 01:28:24 SkyScan query 01:28:25 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 01:28:25 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 01:28:25 Check angles 01:28:25 SkyScan query 01:28:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 01:28:26 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 01:28:26 Message to Master queued w/err=0: serial=204897 error=0 01:28:31 Received message from Master: op=Filter serial=204898 01:28:31 Color wheel filter change from 0 to 0 01:28:31 FLIGetFilterPos err=0 currentPosition=0 01:28:31 FLIGetStepsRemaining err=0 RemainingSteps=0 01:28:31 Filter is already there-color wheel unchanged 01:28:31 Received message from Master: op=Shutter serial=204899 01:28:31 Shutter LASER close 01:28:31 Received message from Camera: op=State serial=204901 01:28:31 GetSingleValue result=40 Value=cccccccc 01:28:31 SkyScan query 01:28:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:28:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:31 Parameters OK 01:28:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:31 Set A/D data flow result=40 01:28:31 Set A/D channel type result=40 01:28:31 Set A/D encoding result=40 01:28:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:31 Set channel filter=0.000000e+000 result=40 01:28:31 Config A/D Result=40 01:28:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:31 Get A/D filter: -9.255963e+061 result=40 01:28:31 Get A/D value=-858993460 result=40 01:28:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:28:31 Parameters OK 01:28:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:28:31 Set A/D data flow result=40 01:28:31 Set A/D channel type result=40 01:28:31 Set A/D encoding result=40 01:28:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:28:31 Set channel filter=0.000000e+000 result=40 01:28:31 Config A/D Result=40 01:28:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:28:31 Get A/D filter: -9.255963e+061 result=40 01:28:31 Get A/D value=-858993460 result=40 01:28:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:28:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:28:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:28:31 Aux= 01:28:31 Message to Camera, serial 204901 queued 01:29:08 Received message from Master: op=PointingHead serial=204914 01:29:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:29:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:29:08 Point started: ret=0 01:29:08 point_skyscan result=0 01:29:09 Check angles 01:29:09 SkyScan query 01:29:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0009 0009 01:29:10 Msec=0 True Az=112.995 Ze=-171.435 Az status=0009 Ze status=0009 01:29:10 Check angles 01:29:10 SkyScan query 01:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:29:11 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:29:11 Message to Master queued w/err=0: serial=204914 error=0 01:29:16 Received message from Master: op=Filter serial=204915 01:29:16 Color wheel filter change from 0 to 0 01:29:16 FLIGetFilterPos err=0 currentPosition=0 01:29:16 FLIGetStepsRemaining err=0 RemainingSteps=0 01:29:16 Filter is already there-color wheel unchanged 01:29:16 Received message from Master: op=Shutter serial=204916 01:29:16 Shutter LASER open 01:29:16 Received message from Camera: op=State serial=204918 01:29:16 GetSingleValue result=40 Value=cccccccc 01:29:16 SkyScan query 01:29:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:29:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:17 Parameters OK 01:29:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:17 Set A/D data flow result=40 01:29:17 Set A/D channel type result=40 01:29:17 Set A/D encoding result=40 01:29:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:17 Set channel filter=0.000000e+000 result=40 01:29:17 Config A/D Result=40 01:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:17 Get A/D filter: -9.255963e+061 result=40 01:29:17 Get A/D value=-858993460 result=40 01:29:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:17 Parameters OK 01:29:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:17 Set A/D data flow result=40 01:29:17 Set A/D channel type result=40 01:29:17 Set A/D encoding result=40 01:29:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:17 Set channel filter=0.000000e+000 result=40 01:29:17 Config A/D Result=40 01:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:17 Get A/D filter: -9.255963e+061 result=40 01:29:17 Get A/D value=-858993460 result=40 01:29:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:29:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:29:17 Aux= 01:29:17 Message to Camera, serial 204918 queued 01:29:25 Received message from Master: op=Shutter serial=204928 01:29:25 Shutter LASER close 01:29:26 Received message from Master: op=PointingHead serial=204932 01:29:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:29:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:29:26 Point started: ret=0 01:29:26 point_skyscan result=0 01:29:27 Check angles 01:29:27 SkyScan query 01:29:27 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.595<-21573 Statuses=0009 0009 01:29:27 Msec=0 True Az=135.72 Ze=-143.595 Az status=0009 Ze status=0009 01:29:27 Check angles 01:29:27 SkyScan query 01:29:28 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.145<-20143 Statuses=0009 0009 01:29:28 Msec=750 True Az=153.57 Ze=-122.145 Az status=0009 Ze status=0009 01:29:28 Check angles 01:29:28 SkyScan query 01:29:29 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.235<-18749 Statuses=0009 0009 01:29:29 Msec=1500 True Az=171.105 Ze=-101.235 Az status=0009 Ze status=0009 01:29:29 Check angles 01:29:29 SkyScan query 01:29:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.295<-17353 Statuses=0008 0009 01:29:29 Msec=2250 True Az=175.995 Ze=-80.295 Az status=0008 Ze status=0009 01:29:30 Check angles 01:29:30 SkyScan query 01:29:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 01:29:30 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 01:29:30 Check angles 01:29:30 SkyScan query 01:29:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:29:31 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:29:31 Message to Master queued w/err=0: serial=204932 error=0 01:29:36 Received message from Master: op=Filter serial=204933 01:29:36 Color wheel filter change from 0 to 0 01:29:36 FLIGetFilterPos err=0 currentPosition=0 01:29:36 FLIGetStepsRemaining err=0 RemainingSteps=0 01:29:36 Filter is already there-color wheel unchanged 01:29:36 Received message from Master: op=Shutter serial=204934 01:29:36 Shutter LASER close 01:29:36 Received message from Camera: op=State serial=204936 01:29:36 GetSingleValue result=40 Value=cccccccc 01:29:36 SkyScan query 01:29:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:29:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:37 Parameters OK 01:29:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:37 Set A/D data flow result=40 01:29:37 Set A/D channel type result=40 01:29:37 Set A/D encoding result=40 01:29:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:37 Set channel filter=0.000000e+000 result=40 01:29:37 Config A/D Result=40 01:29:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:37 Get A/D filter: -9.255963e+061 result=40 01:29:37 Get A/D value=-858993460 result=40 01:29:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:29:37 Parameters OK 01:29:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:29:37 Set A/D data flow result=40 01:29:37 Set A/D channel type result=40 01:29:37 Set A/D encoding result=40 01:29:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:29:37 Set channel filter=0.000000e+000 result=40 01:29:37 Config A/D Result=40 01:29:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:29:37 Get A/D filter: -9.255963e+061 result=40 01:29:37 Get A/D value=-858993460 result=40 01:29:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:29:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:29:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:29:37 Aux= 01:29:37 Message to Camera, serial 204936 queued 01:30:14 Received message from Master: op=PointingHead serial=204949 01:30:14 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:30:14 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:30:14 Point started: ret=0 01:30:14 point_skyscan result=0 01:30:15 Check angles 01:30:15 SkyScan query 01:30:15 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.675<-13445 Statuses=0009 0009 01:30:15 Msec=0 True Az=152.775 Ze=-21.675 Az status=0009 Ze status=0009 01:30:16 Check angles 01:30:16 SkyScan query 01:30:16 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.705<-12047 Statuses=0009 0009 01:30:16 Msec=750 True Az=135.42 Ze=-0.705 Az status=0009 Ze status=0009 01:30:16 Check angles 01:30:16 SkyScan query 01:30:17 SkyScan query done: ret=0 az=117.795<-7853 ze=20.235<-10651 Statuses=0009 0009 01:30:17 Msec=1500 True Az=117.795 Ze=20.235 Az status=0009 Ze status=0009 01:30:17 Check angles 01:30:17 SkyScan query 01:30:18 SkyScan query done: ret=0 az=100.47<-6698 ze=41.235<-9251 Statuses=0009 0009 01:30:18 Msec=2250 True Az=100.47 Ze=41.235 Az status=0009 Ze status=0009 01:30:18 Check angles 01:30:18 SkyScan query 01:30:18 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 01:30:18 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 01:30:19 Check angles 01:30:19 SkyScan query 01:30:19 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 01:30:19 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 01:30:19 Message to Master queued w/err=0: serial=204949 error=0 01:30:24 Received message from Master: op=Filter serial=204950 01:30:24 Color wheel filter change from 0 to 0 01:30:24 FLIGetFilterPos err=0 currentPosition=0 01:30:24 FLIGetStepsRemaining err=0 RemainingSteps=0 01:30:24 Filter is already there-color wheel unchanged 01:30:24 Received message from Master: op=Shutter serial=204951 01:30:24 Shutter LASER close 01:30:24 Received message from Camera: op=State serial=204953 01:30:24 GetSingleValue result=40 Value=cccccccc 01:30:24 SkyScan query 01:30:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:30:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:25 Parameters OK 01:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:25 Set A/D data flow result=40 01:30:25 Set A/D channel type result=40 01:30:25 Set A/D encoding result=40 01:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:25 Set channel filter=0.000000e+000 result=40 01:30:25 Config A/D Result=40 01:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:25 Get A/D filter: -9.255963e+061 result=40 01:30:25 Get A/D value=-858993460 result=40 01:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:30:25 Parameters OK 01:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:30:25 Set A/D data flow result=40 01:30:25 Set A/D channel type result=40 01:30:25 Set A/D encoding result=40 01:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:30:25 Set channel filter=0.000000e+000 result=40 01:30:25 Config A/D Result=40 01:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:30:25 Get A/D filter: -9.255963e+061 result=40 01:30:25 Get A/D value=-858993460 result=40 01:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:30:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:30:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:30:25 Aux= 01:30:25 Message to Camera, serial 204953 queued 01:31:01 Received message from Master: op=PointingHead serial=204965 01:31:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:31:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:31:01 Point started: ret=0 01:31:01 point_skyscan result=0 01:31:02 Check angles 01:31:02 SkyScan query 01:31:03 SkyScan query done: ret=0 az=108.885<-7259 ze=38.475<-9435 Statuses=0009 0008 01:31:03 Msec=0 True Az=108.885 Ze=38.475 Az status=0009 Ze status=0008 01:31:03 Check angles 01:31:03 SkyScan query 01:31:03 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 01:31:03 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 01:31:04 Check angles 01:31:04 SkyScan query 01:31:04 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 01:31:04 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 01:31:04 Check angles 01:31:04 SkyScan query 01:31:05 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 01:31:05 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 01:31:05 Check angles 01:31:05 SkyScan query 01:31:06 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:31:06 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:31:06 Check angles 01:31:06 SkyScan query 01:31:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:31:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:31:06 Message to Master queued w/err=0: serial=204965 error=0 01:31:11 Received message from Master: op=Filter serial=204966 01:31:11 Color wheel filter change from 0 to 0 01:31:11 FLIGetFilterPos err=0 currentPosition=0 01:31:11 FLIGetStepsRemaining err=0 RemainingSteps=0 01:31:11 Filter is already there-color wheel unchanged 01:31:12 Received message from Master: op=Shutter serial=204967 01:31:12 Shutter LASER close 01:31:12 Received message from Camera: op=State serial=204969 01:31:12 GetSingleValue result=40 Value=cccccccc 01:31:12 SkyScan query 01:31:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:31:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:12 Parameters OK 01:31:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:12 Set A/D data flow result=40 01:31:12 Set A/D channel type result=40 01:31:12 Set A/D encoding result=40 01:31:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:12 Set channel filter=0.000000e+000 result=40 01:31:12 Config A/D Result=40 01:31:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:12 Get A/D filter: -9.255963e+061 result=40 01:31:12 Get A/D value=-858993460 result=40 01:31:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:31:12 Parameters OK 01:31:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:31:12 Set A/D data flow result=40 01:31:12 Set A/D channel type result=40 01:31:12 Set A/D encoding result=40 01:31:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:31:12 Set channel filter=0.000000e+000 result=40 01:31:12 Config A/D Result=40 01:31:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:31:12 Get A/D filter: -9.255963e+061 result=40 01:31:12 Get A/D value=-858993460 result=40 01:31:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:31:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:31:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:31:12 Aux= 01:31:12 Message to Camera, serial 204969 queued 01:31:49 Received message from Master: op=PointingHead serial=204982 01:31:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:31:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:31:49 Point started: ret=0 01:31:49 point_skyscan result=0 01:31:50 Check angles 01:31:50 SkyScan query 01:31:51 SkyScan query done: ret=0 az=153.21<-10214 ze=9<-11400 Statuses=0009 0009 01:31:51 Msec=0 True Az=153.21 Ze=9 Az status=0009 Ze status=0009 01:31:51 Check angles 01:31:51 SkyScan query 01:31:51 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.42<-12828 Statuses=0009 0009 01:31:51 Msec=750 True Az=135.42 Ze=-12.42 Az status=0009 Ze status=0009 01:31:52 Check angles 01:31:52 SkyScan query 01:31:52 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.9<-14260 Statuses=0009 0009 01:31:52 Msec=1500 True Az=117.54 Ze=-33.9 Az status=0009 Ze status=0009 01:31:52 Check angles 01:31:52 SkyScan query 01:31:53 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.57<-15438 Statuses=0009 0009 01:31:53 Msec=2250 True Az=100.14 Ze=-51.57 Az status=0009 Ze status=0009 01:31:53 Check angles 01:31:53 SkyScan query 01:31:54 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 01:31:54 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 01:31:54 Check angles 01:31:54 SkyScan query 01:31:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:31:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:31:54 Message to Master queued w/err=0: serial=204982 error=0 01:31:59 Received message from Master: op=Filter serial=204983 01:31:59 Color wheel filter change from 0 to 0 01:31:59 FLIGetFilterPos err=0 currentPosition=0 01:31:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:31:59 Filter is already there-color wheel unchanged 01:32:00 Received message from Master: op=Shutter serial=204984 01:32:00 Shutter LASER close 01:32:00 Received message from Camera: op=State serial=204986 01:32:00 GetSingleValue result=40 Value=cccccccc 01:32:00 SkyScan query 01:32:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:32:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:00 Parameters OK 01:32:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:00 Set A/D data flow result=40 01:32:00 Set A/D channel type result=40 01:32:00 Set A/D encoding result=40 01:32:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:00 Set channel filter=0.000000e+000 result=40 01:32:00 Config A/D Result=40 01:32:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:00 Get A/D filter: -9.255963e+061 result=40 01:32:00 Get A/D value=-858993460 result=40 01:32:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:00 Parameters OK 01:32:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:00 Set A/D data flow result=40 01:32:00 Set A/D channel type result=40 01:32:00 Set A/D encoding result=40 01:32:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:00 Set channel filter=0.000000e+000 result=40 01:32:00 Config A/D Result=40 01:32:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:00 Get A/D filter: -9.255963e+061 result=40 01:32:00 Get A/D value=-858993460 result=40 01:32:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:32:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:32:00 Aux= 01:32:00 Message to Camera, serial 204986 queued 01:32:37 Received message from Master: op=PointingHead serial=204999 01:32:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:32:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:32:37 Point started: ret=0 01:32:37 point_skyscan result=0 01:32:38 Check angles 01:32:38 SkyScan query 01:32:39 SkyScan query done: ret=0 az=108.855<-7257 ze=-80.985<-17399 Statuses=0009 0009 01:32:39 Msec=0 True Az=108.855 Ze=-80.985 Az status=0009 Ze status=0009 01:32:39 Check angles 01:32:39 SkyScan query 01:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 01:32:40 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 01:32:40 Check angles 01:32:40 SkyScan query 01:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.375<-20225 Statuses=0008 0009 01:32:40 Msec=1500 True Az=112.995 Ze=-123.375 Az status=0008 Ze status=0009 01:32:40 Check angles 01:32:40 SkyScan query 01:32:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.72<-21648 Statuses=0008 0009 01:32:41 Msec=2250 True Az=112.995 Ze=-144.72 Az status=0008 Ze status=0009 01:32:41 Check angles 01:32:41 SkyScan query 01:32:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 01:32:42 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 01:32:42 Check angles 01:32:42 SkyScan query 01:32:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:32:43 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:32:43 Message to Master queued w/err=0: serial=204999 error=0 01:32:48 Received message from Master: op=Filter serial=205000 01:32:48 Color wheel filter change from 0 to 0 01:32:48 FLIGetFilterPos err=0 currentPosition=0 01:32:48 FLIGetStepsRemaining err=0 RemainingSteps=0 01:32:48 Filter is already there-color wheel unchanged 01:32:48 Received message from Master: op=Shutter serial=205001 01:32:48 Shutter LASER open 01:32:48 Received message from Camera: op=State serial=205003 01:32:48 GetSingleValue result=40 Value=cccccccc 01:32:48 SkyScan query 01:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:32:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:48 Parameters OK 01:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:48 Set A/D data flow result=40 01:32:48 Set A/D channel type result=40 01:32:48 Set A/D encoding result=40 01:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:48 Set channel filter=0.000000e+000 result=40 01:32:48 Config A/D Result=40 01:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:48 Get A/D filter: -9.255963e+061 result=40 01:32:48 Get A/D value=-858993460 result=40 01:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:32:48 Parameters OK 01:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:32:48 Set A/D data flow result=40 01:32:48 Set A/D channel type result=40 01:32:48 Set A/D encoding result=40 01:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:32:48 Set channel filter=0.000000e+000 result=40 01:32:48 Config A/D Result=40 01:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:32:48 Get A/D filter: -9.255963e+061 result=40 01:32:48 Get A/D value=-858993460 result=40 01:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:32:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:32:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:32:48 Aux= 01:32:48 Message to Camera, serial 205003 queued 01:32:57 Received message from Master: op=Shutter serial=205013 01:32:57 Shutter LASER close 01:32:57 Received message from Master: op=PointingHead serial=205017 01:32:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:32:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:32:58 Point started: ret=0 01:32:58 point_skyscan result=0 01:32:59 Check angles 01:32:59 SkyScan query 01:32:59 SkyScan query done: ret=0 az=89.58<-5972 ze=156.99<-1534 Statuses=0009 0009 01:32:59 Msec=0 True Az=89.58 Ze=156.99 Az status=0009 Ze status=0009 01:32:59 Check angles 01:32:59 SkyScan query 01:33:00 SkyScan query done: ret=0 az=71.94<-4796 ze=136.065<-2929 Statuses=0009 0009 01:33:00 Msec=750 True Az=71.94 Ze=136.065 Az status=0009 Ze status=0009 01:33:00 Check angles 01:33:00 SkyScan query 01:33:01 SkyScan query done: ret=0 az=54.33<-3622 ze=114.615<-4359 Statuses=0009 0009 01:33:01 Msec=1500 True Az=54.33 Ze=114.615 Az status=0009 Ze status=0009 01:33:01 Check angles 01:33:01 SkyScan query 01:33:01 SkyScan query done: ret=0 az=40.995<-2733 ze=93.27<-5782 Statuses=0009 0009 01:33:01 Msec=2250 True Az=40.995 Ze=93.27 Az status=0009 Ze status=0009 01:33:02 Check angles 01:33:02 SkyScan query 01:33:02 SkyScan query done: ret=0 az=40.98<-2732 ze=71.895<-7207 Statuses=0008 0009 01:33:02 Msec=3000 True Az=40.98 Ze=71.895 Az status=0008 Ze status=0009 01:33:02 Check angles 01:33:02 SkyScan query 01:33:03 SkyScan query done: ret=0 az=40.98<-2732 ze=52.02<-8532 Statuses=0008 0009 01:33:03 Msec=3750 True Az=40.98 Ze=52.02 Az status=0008 Ze status=0009 01:33:03 Check angles 01:33:03 SkyScan query 01:33:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:33:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:33:04 Message to Master queued w/err=0: serial=205017 error=0 01:33:09 Received message from Master: op=Filter serial=205018 01:33:09 Color wheel filter change from 0 to 0 01:33:09 FLIGetFilterPos err=0 currentPosition=0 01:33:09 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:09 Filter is already there-color wheel unchanged 01:33:09 Received message from Master: op=Shutter serial=205019 01:33:09 Shutter LASER close 01:33:09 Received message from Camera: op=State serial=205021 01:33:09 GetSingleValue result=40 Value=cccccccc 01:33:09 SkyScan query 01:33:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:33:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:10 Parameters OK 01:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:10 Set A/D data flow result=40 01:33:10 Set A/D channel type result=40 01:33:10 Set A/D encoding result=40 01:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:10 Set channel filter=0.000000e+000 result=40 01:33:10 Config A/D Result=40 01:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:10 Get A/D filter: -9.255963e+061 result=40 01:33:10 Get A/D value=-858993460 result=40 01:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:10 Parameters OK 01:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:10 Set A/D data flow result=40 01:33:10 Set A/D channel type result=40 01:33:10 Set A/D encoding result=40 01:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:10 Set channel filter=0.000000e+000 result=40 01:33:10 Config A/D Result=40 01:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:10 Get A/D filter: -9.255963e+061 result=40 01:33:10 Get A/D value=-858993460 result=40 01:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:33:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:33:10 Aux= 01:33:10 Message to Camera, serial 205021 queued 01:33:47 Received message from Master: op=PointingHead serial=205034 01:33:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:33:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:33:47 Point started: ret=0 01:33:47 point_skyscan result=0 01:33:48 Check angles 01:33:48 SkyScan query 01:33:48 SkyScan query done: ret=0 az=40.995<-2733 ze=21.795<-10547 Statuses=0008 0009 01:33:48 Msec=0 True Az=40.995 Ze=21.795 Az status=0008 Ze status=0009 01:33:48 Check angles 01:33:48 SkyScan query 01:33:49 SkyScan query done: ret=0 az=41.01<-2734 ze=0.375<-11975 Statuses=0008 0009 01:33:49 Msec=750 True Az=41.01 Ze=0.375 Az status=0008 Ze status=0009 01:33:49 Check angles 01:33:49 SkyScan query 01:33:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.015<-13401 Statuses=0008 0009 01:33:50 Msec=1500 True Az=40.995 Ze=-21.015 Az status=0008 Ze status=0009 01:33:50 Check angles 01:33:50 SkyScan query 01:33:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 01:33:51 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 01:33:51 Check angles 01:33:51 SkyScan query 01:33:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 01:33:51 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 01:33:51 Message to Master queued w/err=0: serial=205034 error=0 01:33:56 Received message from Master: op=Filter serial=205035 01:33:56 Color wheel filter change from 0 to 0 01:33:56 FLIGetFilterPos err=0 currentPosition=0 01:33:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:33:56 Filter is already there-color wheel unchanged 01:33:56 Received message from Master: op=Shutter serial=205036 01:33:56 Shutter LASER close 01:33:57 Received message from Camera: op=State serial=205038 01:33:57 GetSingleValue result=40 Value=cccccccc 01:33:57 SkyScan query 01:33:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:33:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:57 Parameters OK 01:33:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:57 Set A/D data flow result=40 01:33:57 Set A/D channel type result=40 01:33:57 Set A/D encoding result=40 01:33:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:57 Set channel filter=0.000000e+000 result=40 01:33:57 Config A/D Result=40 01:33:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:57 Get A/D filter: -9.255963e+061 result=40 01:33:57 Get A/D value=-858993460 result=40 01:33:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:33:57 Parameters OK 01:33:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:33:57 Set A/D data flow result=40 01:33:57 Set A/D channel type result=40 01:33:57 Set A/D encoding result=40 01:33:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:33:57 Set channel filter=0.000000e+000 result=40 01:33:57 Config A/D Result=40 01:33:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:33:57 Get A/D filter: -9.255963e+061 result=40 01:33:57 Get A/D value=-858993460 result=40 01:33:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:33:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:33:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:33:57 Aux= 01:33:57 Message to Camera, serial 205038 queued 01:34:34 Received message from Master: op=PointingHead serial=205051 01:34:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:34:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:34:34 Point started: ret=0 01:34:34 point_skyscan result=0 01:34:35 Check angles 01:34:35 SkyScan query 01:34:36 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.4<-16560 Statuses=0009 0009 01:34:36 Msec=0 True Az=64.215 Ze=-68.4 Az status=0009 Ze status=0009 01:34:36 Check angles 01:34:36 SkyScan query 01:34:36 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.82<-17988 Statuses=0009 0009 01:34:36 Msec=750 True Az=81.795 Ze=-89.82 Az status=0009 Ze status=0009 01:34:37 Check angles 01:34:37 SkyScan query 01:34:37 SkyScan query done: ret=0 az=99.075<-6605 ze=-110.415<-19361 Statuses=0009 0009 01:34:37 Msec=1500 True Az=99.075 Ze=-110.415 Az status=0009 Ze status=0009 01:34:37 Check angles 01:34:37 SkyScan query 01:34:38 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.28<-20752 Statuses=0009 0009 01:34:38 Msec=2250 True Az=116.595 Ze=-131.28 Az status=0009 Ze status=0009 01:34:38 Check angles 01:34:38 SkyScan query 01:34:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 01:34:39 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 01:34:39 Check angles 01:34:39 SkyScan query 01:34:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 01:34:39 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 01:34:39 Message to Master queued w/err=0: serial=205051 error=0 01:34:44 Received message from Master: op=Filter serial=205052 01:34:44 Color wheel filter change from 0 to 0 01:34:44 FLIGetFilterPos err=0 currentPosition=0 01:34:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:34:44 Filter is already there-color wheel unchanged 01:34:45 Received message from Master: op=Shutter serial=205053 01:34:45 Shutter LASER close 01:34:45 Received message from Camera: op=State serial=205055 01:34:45 GetSingleValue result=40 Value=cccccccc 01:34:45 SkyScan query 01:34:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:34:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:45 Parameters OK 01:34:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:45 Set A/D data flow result=40 01:34:45 Set A/D channel type result=40 01:34:45 Set A/D encoding result=40 01:34:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:45 Set channel filter=0.000000e+000 result=40 01:34:45 Config A/D Result=40 01:34:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:45 Get A/D filter: -9.255963e+061 result=40 01:34:45 Get A/D value=-858993460 result=40 01:34:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:34:45 Parameters OK 01:34:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:34:45 Set A/D data flow result=40 01:34:45 Set A/D channel type result=40 01:34:45 Set A/D encoding result=40 01:34:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:34:45 Set channel filter=0.000000e+000 result=40 01:34:45 Config A/D Result=40 01:34:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:34:45 Get A/D filter: -9.255963e+061 result=40 01:34:45 Get A/D value=-858993460 result=40 01:34:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:34:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:34:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:34:45 Aux= 01:34:45 Message to Camera, serial 205055 queued 01:35:22 Received message from Master: op=PointingHead serial=205068 01:35:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:35:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:35:22 Point started: ret=0 01:35:22 point_skyscan result=0 01:35:23 Check angles 01:35:23 SkyScan query 01:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0009 0009 01:35:24 Msec=0 True Az=112.995 Ze=-171.345 Az status=0009 Ze status=0009 01:35:24 Check angles 01:35:24 SkyScan query 01:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:35:24 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:35:24 Message to Master queued w/err=0: serial=205068 error=0 01:35:29 Received message from Master: op=Filter serial=205069 01:35:29 Color wheel filter change from 0 to 0 01:35:29 FLIGetFilterPos err=0 currentPosition=0 01:35:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:29 Filter is already there-color wheel unchanged 01:35:30 Received message from Master: op=Shutter serial=205070 01:35:30 Shutter LASER open 01:35:30 Received message from Camera: op=State serial=205072 01:35:30 GetSingleValue result=40 Value=cccccccc 01:35:30 SkyScan query 01:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:35:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:30 Parameters OK 01:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:30 Set A/D data flow result=40 01:35:30 Set A/D channel type result=40 01:35:30 Set A/D encoding result=40 01:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:30 Set channel filter=0.000000e+000 result=40 01:35:30 Config A/D Result=40 01:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:30 Get A/D filter: -9.255963e+061 result=40 01:35:30 Get A/D value=-858993460 result=40 01:35:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:30 Parameters OK 01:35:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:30 Set A/D data flow result=40 01:35:30 Set A/D channel type result=40 01:35:30 Set A/D encoding result=40 01:35:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:30 Set channel filter=0.000000e+000 result=40 01:35:30 Config A/D Result=40 01:35:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:30 Get A/D filter: -9.255963e+061 result=40 01:35:30 Get A/D value=-858993460 result=40 01:35:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:30 Aux= 01:35:30 Message to Camera, serial 205072 queued 01:35:39 Received message from Master: op=Shutter serial=205082 01:35:39 Shutter LASER close 01:35:39 Received message from Master: op=PointingHead serial=205086 01:35:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:35:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:35:40 Point started: ret=0 01:35:40 point_skyscan result=0 01:35:41 Check angles 01:35:41 SkyScan query 01:35:41 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.295<-21553 Statuses=0009 0009 01:35:41 Msec=0 True Az=135.93 Ze=-143.295 Az status=0009 Ze status=0009 01:35:41 Check angles 01:35:41 SkyScan query 01:35:42 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.265<-20151 Statuses=0009 0009 01:35:42 Msec=750 True Az=153.495 Ze=-122.265 Az status=0009 Ze status=0009 01:35:42 Check angles 01:35:42 SkyScan query 01:35:43 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.4<-18760 Statuses=0009 0009 01:35:43 Msec=1500 True Az=170.955 Ze=-101.4 Az status=0009 Ze status=0009 01:35:43 Check angles 01:35:43 SkyScan query 01:35:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 01:35:43 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 01:35:44 Check angles [UTC 2018-12-17 01:35:44] 01:35:44 SkyScan query 01:35:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-57.255<-15817 Statuses=0008 0009 01:35:44 Msec=3000 True Az=175.995 Ze=-57.255 Az status=0008 Ze status=0009 01:35:44 Check angles 01:35:44 SkyScan query 01:35:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:35:45 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:35:45 Message to Master queued w/err=0: serial=205086 error=0 01:35:50 Received message from Master: op=Filter serial=205087 01:35:50 Color wheel filter change from 0 to 0 01:35:50 FLIGetFilterPos err=0 currentPosition=0 01:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 01:35:50 Filter is already there-color wheel unchanged 01:35:50 Received message from Master: op=Shutter serial=205088 01:35:50 Shutter LASER close 01:35:50 Received message from Camera: op=State serial=205090 01:35:50 GetSingleValue result=40 Value=cccccccc 01:35:50 SkyScan query 01:35:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:51 Parameters OK 01:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:51 Set A/D data flow result=40 01:35:51 Set A/D channel type result=40 01:35:51 Set A/D encoding result=40 01:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:51 Set channel filter=0.000000e+000 result=40 01:35:51 Config A/D Result=40 01:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:51 Get A/D filter: -9.255963e+061 result=40 01:35:51 Get A/D value=-858993460 result=40 01:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:35:51 Parameters OK 01:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:35:51 Set A/D data flow result=40 01:35:51 Set A/D channel type result=40 01:35:51 Set A/D encoding result=40 01:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:35:51 Set channel filter=0.000000e+000 result=40 01:35:51 Config A/D Result=40 01:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:35:51 Get A/D filter: -9.255963e+061 result=40 01:35:51 Get A/D value=-858993460 result=40 01:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:35:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:35:51 Aux= 01:35:51 Message to Camera, serial 205090 queued [UTC 2018-12-17 01:35:52] 01:36:28 Received message from Master: op=PointingHead serial=205103 01:36:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:36:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:36:28 Point started: ret=0 01:36:28 point_skyscan result=0 01:36:29 Check angles 01:36:29 SkyScan query 01:36:29 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.975<-13465 Statuses=0009 0009 01:36:29 Msec=0 True Az=152.985 Ze=-21.975 Az status=0009 Ze status=0009 01:36:29 Check angles 01:36:29 SkyScan query 01:36:30 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.525<-12035 Statuses=0009 0009 01:36:30 Msec=750 True Az=135.165 Ze=-0.525 Az status=0009 Ze status=0009 01:36:30 Check angles 01:36:30 SkyScan query 01:36:31 SkyScan query done: ret=0 az=117.585<-7839 ze=20.415<-10639 Statuses=0009 0009 01:36:31 Msec=1500 True Az=117.585 Ze=20.415 Az status=0009 Ze status=0009 01:36:31 Check angles 01:36:31 SkyScan query 01:36:32 SkyScan query done: ret=0 az=100.23<-6682 ze=41.385<-9241 Statuses=0009 0009 01:36:32 Msec=2250 True Az=100.23 Ze=41.385 Az status=0009 Ze status=0009 01:36:32 Check angles 01:36:32 SkyScan query 01:36:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 01:36:32 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 01:36:32 Check angles 01:36:32 SkyScan query 01:36:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:36:33 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 01:36:33 Message to Master queued w/err=0: serial=205103 error=0 01:36:38 Received message from Master: op=Filter serial=205104 01:36:38 Color wheel filter change from 0 to 0 01:36:38 FLIGetFilterPos err=0 currentPosition=0 01:36:38 FLIGetStepsRemaining err=0 RemainingSteps=0 01:36:38 Filter is already there-color wheel unchanged 01:36:38 Received message from Master: op=Shutter serial=205105 01:36:38 Shutter LASER close 01:36:38 Received message from Camera: op=State serial=205107 01:36:38 GetSingleValue result=40 Value=cccccccc 01:36:38 SkyScan query 01:36:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:36:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:39 Parameters OK 01:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:39 Set A/D data flow result=40 01:36:39 Set A/D channel type result=40 01:36:39 Set A/D encoding result=40 01:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:39 Set channel filter=0.000000e+000 result=40 01:36:39 Config A/D Result=40 01:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:39 Get A/D filter: -9.255963e+061 result=40 01:36:39 Get A/D value=-858993460 result=40 01:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:36:39 Parameters OK 01:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:36:39 Set A/D data flow result=40 01:36:39 Set A/D channel type result=40 01:36:39 Set A/D encoding result=40 01:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:36:39 Set channel filter=0.000000e+000 result=40 01:36:39 Config A/D Result=40 01:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:36:39 Get A/D filter: -9.255963e+061 result=40 01:36:39 Get A/D value=-858993460 result=40 01:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:36:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:36:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:36:39 Aux= 01:36:39 Message to Camera, serial 205107 queued 01:37:16 Received message from Master: op=PointingHead serial=205120 01:37:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:37:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:37:16 Point started: ret=0 01:37:16 point_skyscan result=0 01:37:17 Check angles 01:37:17 SkyScan query 01:37:17 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 01:37:17 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 01:37:18 Check angles 01:37:18 SkyScan query 01:37:18 SkyScan query done: ret=0 az=126.51<-8434 ze=38.505<-9433 Statuses=0009 0008 01:37:18 Msec=750 True Az=126.51 Ze=38.505 Az status=0009 Ze status=0008 01:37:18 Check angles 01:37:18 SkyScan query 01:37:19 SkyScan query done: ret=0 az=144<-9600 ze=38.505<-9433 Statuses=0009 0008 01:37:19 Msec=1500 True Az=144 Ze=38.505 Az status=0009 Ze status=0008 01:37:19 Check angles 01:37:19 SkyScan query 01:37:20 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 01:37:20 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 01:37:20 Check angles 01:37:20 SkyScan query 01:37:20 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:37:20 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:37:21 Check angles 01:37:21 SkyScan query 01:37:21 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:37:21 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:37:21 Message to Master queued w/err=0: serial=205120 error=0 01:37:26 Received message from Master: op=Filter serial=205121 01:37:26 Color wheel filter change from 0 to 0 01:37:26 FLIGetFilterPos err=0 currentPosition=0 01:37:26 FLIGetStepsRemaining err=0 RemainingSteps=0 01:37:26 Filter is already there-color wheel unchanged 01:37:26 Received message from Master: op=Shutter serial=205122 01:37:26 Shutter LASER close 01:37:26 Received message from Camera: op=State serial=205124 01:37:26 GetSingleValue result=40 Value=cccccccc 01:37:26 SkyScan query 01:37:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:37:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:27 Parameters OK 01:37:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:27 Set A/D data flow result=40 01:37:27 Set A/D channel type result=40 01:37:27 Set A/D encoding result=40 01:37:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:27 Set channel filter=0.000000e+000 result=40 01:37:27 Config A/D Result=40 01:37:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:27 Get A/D filter: -9.255963e+061 result=40 01:37:27 Get A/D value=-858993460 result=40 01:37:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:37:27 Parameters OK 01:37:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:37:27 Set A/D data flow result=40 01:37:27 Set A/D channel type result=40 01:37:27 Set A/D encoding result=40 01:37:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:37:27 Set channel filter=0.000000e+000 result=40 01:37:27 Config A/D Result=40 01:37:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:37:27 Get A/D filter: -9.255963e+061 result=40 01:37:27 Get A/D value=-858993460 result=40 01:37:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:37:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:37:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:37:27 Aux= 01:37:27 Message to Camera, serial 205124 queued 01:38:04 Received message from Master: op=PointingHead serial=205137 01:38:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:38:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:38:04 Point started: ret=0 01:38:04 point_skyscan result=0 01:38:05 Check angles 01:38:05 SkyScan query 01:38:05 SkyScan query done: ret=0 az=152.445<-10163 ze=8.115<-11459 Statuses=0009 0009 01:38:05 Msec=0 True Az=152.445 Ze=8.115 Az status=0009 Ze status=0009 01:38:06 Check angles 01:38:06 SkyScan query 01:38:06 SkyScan query done: ret=0 az=134.91<-8994 ze=-12.72<-12848 Statuses=0009 0009 01:38:06 Msec=750 True Az=134.91 Ze=-12.72 Az status=0009 Ze status=0009 01:38:06 Check angles 01:38:06 SkyScan query 01:38:07 SkyScan query done: ret=0 az=117.39<-7826 ze=-33.765<-14251 Statuses=0009 0009 01:38:07 Msec=1500 True Az=117.39 Ze=-33.765 Az status=0009 Ze status=0009 01:38:07 Check angles 01:38:07 SkyScan query 01:38:08 SkyScan query done: ret=0 az=100.005<-6667 ze=-51.57<-15438 Statuses=0009 0009 01:38:08 Msec=2250 True Az=100.005 Ze=-51.57 Az status=0009 Ze status=0009 01:38:08 Check angles 01:38:08 SkyScan query 01:38:08 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 01:38:08 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 01:38:09 Check angles 01:38:09 SkyScan query 01:38:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:38:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:38:09 Message to Master queued w/err=0: serial=205137 error=0 01:38:14 Received message from Master: op=Filter serial=205138 01:38:14 Color wheel filter change from 0 to 0 01:38:14 FLIGetFilterPos err=0 currentPosition=0 01:38:14 FLIGetStepsRemaining err=0 RemainingSteps=0 01:38:14 Filter is already there-color wheel unchanged 01:38:14 Received message from Master: op=Shutter serial=205139 01:38:14 Shutter LASER close 01:38:14 Received message from Camera: op=State serial=205141 01:38:14 GetSingleValue result=40 Value=cccccccc 01:38:14 SkyScan query 01:38:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:38:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:15 Parameters OK 01:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:15 Set A/D data flow result=40 01:38:15 Set A/D channel type result=40 01:38:15 Set A/D encoding result=40 01:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:15 Set channel filter=0.000000e+000 result=40 01:38:15 Config A/D Result=40 01:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:15 Get A/D filter: -9.255963e+061 result=40 01:38:15 Get A/D value=-858993460 result=40 01:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:38:15 Parameters OK 01:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:38:15 Set A/D data flow result=40 01:38:15 Set A/D channel type result=40 01:38:15 Set A/D encoding result=40 01:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:38:15 Set channel filter=0.000000e+000 result=40 01:38:15 Config A/D Result=40 01:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:38:15 Get A/D filter: -9.255963e+061 result=40 01:38:15 Get A/D value=-858993460 result=40 01:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:38:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:38:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:38:15 Aux= 01:38:15 Message to Camera, serial 205141 queued 01:38:52 Received message from Master: op=PointingHead serial=205154 01:38:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:38:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:38:52 Point started: ret=0 01:38:52 point_skyscan result=0 01:38:53 Check angles 01:38:53 SkyScan query 01:38:53 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.375<-17425 Statuses=0009 0009 01:38:53 Msec=0 True Az=109.125 Ze=-81.375 Az status=0009 Ze status=0009 01:38:54 Check angles 01:38:54 SkyScan query 01:38:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 01:38:54 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 01:38:54 Check angles 01:38:54 SkyScan query 01:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 01:38:55 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 01:38:55 Check angles 01:38:55 SkyScan query 01:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.255<-21617 Statuses=0008 0009 01:38:56 Msec=2250 True Az=112.995 Ze=-144.255 Az status=0008 Ze status=0009 01:38:56 Check angles 01:38:56 SkyScan query 01:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.195<-23013 Statuses=0008 0009 01:38:56 Msec=3000 True Az=112.995 Ze=-165.195 Az status=0008 Ze status=0009 01:38:57 Check angles 01:38:57 SkyScan query 01:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:38:57 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:38:57 Message to Master queued w/err=0: serial=205154 error=0 01:39:02 Received message from Master: op=Filter serial=205155 01:39:02 Color wheel filter change from 0 to 0 01:39:02 FLIGetFilterPos err=0 currentPosition=0 01:39:02 FLIGetStepsRemaining err=0 RemainingSteps=0 01:39:02 Filter is already there-color wheel unchanged 01:39:02 Received message from Master: op=Shutter serial=205156 01:39:02 Shutter LASER open 01:39:03 Received message from Camera: op=State serial=205158 01:39:03 GetSingleValue result=40 Value=cccccccc 01:39:03 SkyScan query 01:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:39:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:03 Parameters OK 01:39:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:03 Set A/D data flow result=40 01:39:03 Set A/D channel type result=40 01:39:03 Set A/D encoding result=40 01:39:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:03 Set channel filter=0.000000e+000 result=40 01:39:03 Config A/D Result=40 01:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:03 Get A/D filter: -9.255963e+061 result=40 01:39:03 Get A/D value=-858993460 result=40 01:39:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:03 Parameters OK 01:39:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:03 Set A/D data flow result=40 01:39:03 Set A/D channel type result=40 01:39:03 Set A/D encoding result=40 01:39:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:03 Set channel filter=0.000000e+000 result=40 01:39:03 Config A/D Result=40 01:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:03 Get A/D filter: -9.255963e+061 result=40 01:39:03 Get A/D value=-858993460 result=40 01:39:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:39:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:39:03 Aux= 01:39:03 Message to Camera, serial 205158 queued 01:39:12 Received message from Master: op=Shutter serial=205168 01:39:12 Shutter LASER close 01:39:12 Received message from Master: op=PointingHead serial=205172 01:39:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:39:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:39:12 Point started: ret=0 01:39:12 point_skyscan result=0 01:39:13 Check angles 01:39:13 SkyScan query 01:39:14 SkyScan query done: ret=0 az=89.775<-5985 ze=157.065<-1529 Statuses=0009 0009 01:39:14 Msec=0 True Az=89.775 Ze=157.065 Az status=0009 Ze status=0009 01:39:14 Check angles 01:39:14 SkyScan query 01:39:14 SkyScan query done: ret=0 az=71.895<-4793 ze=135.69<-2954 Statuses=0009 0009 01:39:14 Msec=750 True Az=71.895 Ze=135.69 Az status=0009 Ze status=0009 01:39:15 Check angles 01:39:15 SkyScan query 01:39:15 SkyScan query done: ret=0 az=54.585<-3639 ze=114.675<-4355 Statuses=0009 0009 01:39:15 Msec=1500 True Az=54.585 Ze=114.675 Az status=0009 Ze status=0009 01:39:15 Check angles 01:39:15 SkyScan query 01:39:16 SkyScan query done: ret=0 az=41.01<-2734 ze=93.78<-5748 Statuses=0009 0009 01:39:16 Msec=2250 True Az=41.01 Ze=93.78 Az status=0009 Ze status=0009 01:39:16 Check angles 01:39:16 SkyScan query 01:39:17 SkyScan query done: ret=0 az=40.98<-2732 ze=72.765<-7149 Statuses=0008 0009 01:39:17 Msec=3000 True Az=40.98 Ze=72.765 Az status=0008 Ze status=0009 01:39:17 Check angles 01:39:17 SkyScan query 01:39:17 SkyScan query done: ret=0 az=40.98<-2732 ze=52.47<-8502 Statuses=0008 0009 01:39:17 Msec=3750 True Az=40.98 Ze=52.47 Az status=0008 Ze status=0009 01:39:18 Check angles 01:39:18 SkyScan query 01:39:18 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 01:39:18 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 01:39:18 Message to Master queued w/err=0: serial=205172 error=0 01:39:23 Received message from Master: op=Filter serial=205173 01:39:23 Color wheel filter change from 0 to 0 01:39:23 FLIGetFilterPos err=0 currentPosition=0 01:39:23 FLIGetStepsRemaining err=0 RemainingSteps=0 01:39:23 Filter is already there-color wheel unchanged 01:39:23 Received message from Master: op=Shutter serial=205174 01:39:23 Shutter LASER close 01:39:24 Received message from Camera: op=State serial=205176 01:39:24 GetSingleValue result=40 Value=cccccccc 01:39:24 SkyScan query 01:39:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:39:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:24 Parameters OK 01:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:24 Set A/D data flow result=40 01:39:24 Set A/D channel type result=40 01:39:24 Set A/D encoding result=40 01:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:24 Set channel filter=0.000000e+000 result=40 01:39:24 Config A/D Result=40 01:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:24 Get A/D filter: -9.255963e+061 result=40 01:39:24 Get A/D value=-858993460 result=40 01:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:39:24 Parameters OK 01:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:39:24 Set A/D data flow result=40 01:39:24 Set A/D channel type result=40 01:39:24 Set A/D encoding result=40 01:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:39:24 Set channel filter=0.000000e+000 result=40 01:39:24 Config A/D Result=40 01:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:39:24 Get A/D filter: -9.255963e+061 result=40 01:39:24 Get A/D value=-858993460 result=40 01:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:39:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:39:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:39:24 Aux= 01:39:24 Message to Camera, serial 205176 queued 01:40:01 Received message from Master: op=PointingHead serial=205189 01:40:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:40:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:40:02 Point started: ret=0 01:40:02 point_skyscan result=0 01:40:02 Check angles 01:40:02 SkyScan query 01:40:03 SkyScan query done: ret=0 az=40.995<-2733 ze=21.465<-10569 Statuses=0008 0009 01:40:03 Msec=0 True Az=40.995 Ze=21.465 Az status=0008 Ze status=0009 01:40:03 Check angles 01:40:03 SkyScan query 01:40:04 SkyScan query done: ret=0 az=40.995<-2733 ze=0.465<-11969 Statuses=0008 0009 01:40:04 Msec=750 True Az=40.995 Ze=0.465 Az status=0008 Ze status=0009 01:40:04 Check angles 01:40:04 SkyScan query 01:40:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.49<-13366 Statuses=0008 0009 01:40:04 Msec=1500 True Az=40.995 Ze=-20.49 Az status=0008 Ze status=0009 01:40:05 Check angles 01:40:05 SkyScan query 01:40:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:40:05 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:40:05 Check angles 01:40:05 SkyScan query 01:40:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.52<-14568 Statuses=0008 0008 01:40:06 Msec=3000 True Az=40.995 Ze=-38.52 Az status=0008 Ze status=0008 01:40:06 Message to Master queued w/err=0: serial=205189 error=0 01:40:11 Received message from Master: op=Filter serial=205190 01:40:11 Color wheel filter change from 0 to 0 01:40:11 FLIGetFilterPos err=0 currentPosition=0 01:40:11 FLIGetStepsRemaining err=0 RemainingSteps=0 01:40:11 Filter is already there-color wheel unchanged 01:40:11 Received message from Master: op=Shutter serial=205191 01:40:11 Shutter LASER close 01:40:11 Received message from Camera: op=State serial=205193 01:40:11 GetSingleValue result=40 Value=cccccccc 01:40:11 SkyScan query 01:40:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:40:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:12 Parameters OK 01:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:12 Set A/D data flow result=40 01:40:12 Set A/D channel type result=40 01:40:12 Set A/D encoding result=40 01:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:12 Set channel filter=0.000000e+000 result=40 01:40:12 Config A/D Result=40 01:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:12 Get A/D filter: -9.255963e+061 result=40 01:40:12 Get A/D value=-858993460 result=40 01:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:40:12 Parameters OK 01:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:40:12 Set A/D data flow result=40 01:40:12 Set A/D channel type result=40 01:40:12 Set A/D encoding result=40 01:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:40:12 Set channel filter=0.000000e+000 result=40 01:40:12 Config A/D Result=40 01:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:40:12 Get A/D filter: -9.255963e+061 result=40 01:40:12 Get A/D value=-858993460 result=40 01:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:40:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:40:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:40:12 Aux= 01:40:12 Message to Camera, serial 205193 queued 01:40:48 Received message from Master: op=PointingHead serial=205206 01:40:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:40:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:40:49 Point started: ret=0 01:40:49 point_skyscan result=0 01:40:50 Check angles 01:40:50 SkyScan query 01:40:50 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.415<-16561 Statuses=0009 0009 01:40:50 Msec=0 True Az=64.215 Ze=-68.415 Az status=0009 Ze status=0009 01:40:50 Check angles 01:40:50 SkyScan query 01:40:51 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.415<-17961 Statuses=0009 0009 01:40:51 Msec=750 True Az=81.6 Ze=-89.415 Az status=0009 Ze status=0009 01:40:51 Check angles 01:40:51 SkyScan query 01:40:52 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.325<-19355 Statuses=0009 0009 01:40:52 Msec=1500 True Az=99.105 Ze=-110.325 Az status=0009 Ze status=0009 01:40:52 Check angles 01:40:52 SkyScan query 01:40:52 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.295<-20753 Statuses=0009 0009 01:40:52 Msec=2250 True Az=116.52 Ze=-131.295 Az status=0009 Ze status=0009 01:40:53 Check angles 01:40:53 SkyScan query 01:40:53 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 01:40:53 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 01:40:53 Check angles 01:40:53 SkyScan query 01:40:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 01:40:54 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 01:40:54 Message to Master queued w/err=0: serial=205206 error=0 01:40:59 Received message from Master: op=Filter serial=205207 01:40:59 Color wheel filter change from 0 to 0 01:40:59 FLIGetFilterPos err=0 currentPosition=0 01:40:59 FLIGetStepsRemaining err=0 RemainingSteps=0 01:40:59 Filter is already there-color wheel unchanged 01:40:59 Received message from Master: op=Shutter serial=205208 01:40:59 Shutter LASER close 01:40:59 Received message from Camera: op=State serial=205210 01:40:59 GetSingleValue result=40 Value=cccccccc 01:40:59 SkyScan query 01:41:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:41:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:00 Parameters OK 01:41:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:00 Set A/D data flow result=40 01:41:00 Set A/D channel type result=40 01:41:00 Set A/D encoding result=40 01:41:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:00 Set channel filter=0.000000e+000 result=40 01:41:00 Config A/D Result=40 01:41:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:00 Get A/D filter: -9.255963e+061 result=40 01:41:00 Get A/D value=-858993460 result=40 01:41:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:00 Parameters OK 01:41:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:00 Set A/D data flow result=40 01:41:00 Set A/D channel type result=40 01:41:00 Set A/D encoding result=40 01:41:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:00 Set channel filter=0.000000e+000 result=40 01:41:00 Config A/D Result=40 01:41:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:00 Get A/D filter: -9.255963e+061 result=40 01:41:00 Get A/D value=-858993460 result=40 01:41:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:41:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:41:00 Aux= 01:41:00 Message to Camera, serial 205210 queued 01:41:37 Received message from Master: op=PointingHead serial=205223 01:41:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:41:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:41:37 Point started: ret=0 01:41:37 point_skyscan result=0 01:41:38 Check angles 01:41:38 SkyScan query 01:41:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 01:41:38 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 01:41:38 Check angles 01:41:38 SkyScan query 01:41:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:41:39 Msec=750 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 01:41:39 Message to Master queued w/err=0: serial=205223 error=0 01:41:44 Received message from Master: op=Filter serial=205224 01:41:44 Color wheel filter change from 0 to 0 01:41:44 FLIGetFilterPos err=0 currentPosition=0 01:41:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:41:44 Filter is already there-color wheel unchanged 01:41:44 Received message from Master: op=Shutter serial=205225 01:41:44 Shutter LASER open 01:41:44 Received message from Camera: op=State serial=205227 01:41:44 GetSingleValue result=40 Value=cccccccc 01:41:44 SkyScan query 01:41:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 01:41:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:45 Parameters OK 01:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:45 Set A/D data flow result=40 01:41:45 Set A/D channel type result=40 01:41:45 Set A/D encoding result=40 01:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:45 Set channel filter=0.000000e+000 result=40 01:41:45 Config A/D Result=40 01:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:45 Get A/D filter: -9.255963e+061 result=40 01:41:45 Get A/D value=-858993460 result=40 01:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:41:45 Parameters OK 01:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:41:45 Set A/D data flow result=40 01:41:45 Set A/D channel type result=40 01:41:45 Set A/D encoding result=40 01:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:41:45 Set channel filter=0.000000e+000 result=40 01:41:45 Config A/D Result=40 01:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:41:45 Get A/D filter: -9.255963e+061 result=40 01:41:45 Get A/D value=-858993460 result=40 01:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:41:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:41:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:41:45 Aux= 01:41:45 Message to Camera, serial 205227 queued 01:41:53 Received message from Master: op=Shutter serial=205237 01:41:53 Shutter LASER close 01:41:54 Received message from Master: op=PointingHead serial=205241 01:41:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:41:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:41:54 Point started: ret=0 01:41:54 point_skyscan result=0 01:41:55 Check angles 01:41:55 SkyScan query 01:41:56 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.755<-21517 Statuses=0009 0009 01:41:56 Msec=0 True Az=136.425 Ze=-142.755 Az status=0009 Ze status=0009 01:41:56 Check angles 01:41:56 SkyScan query 01:41:56 SkyScan query done: ret=0 az=154.305<-10287 ze=-121.365<-20091 Statuses=0009 0009 01:41:56 Msec=750 True Az=154.305 Ze=-121.365 Az status=0009 Ze status=0009 01:41:57 Check angles 01:41:57 SkyScan query 01:41:57 SkyScan query done: ret=0 az=171.735<-11449 ze=-100.29<-18686 Statuses=0009 0009 01:41:57 Msec=1500 True Az=171.735 Ze=-100.29 Az status=0009 Ze status=0009 01:41:57 Check angles 01:41:57 SkyScan query 01:41:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.38<-17292 Statuses=0008 0009 01:41:58 Msec=2250 True Az=175.995 Ze=-79.38 Az status=0008 Ze status=0009 01:41:58 Check angles 01:41:58 SkyScan query 01:41:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.425<-15895 Statuses=0008 0009 01:41:59 Msec=3000 True Az=176.01 Ze=-58.425 Az status=0008 Ze status=0009 01:41:59 Check angles 01:41:59 SkyScan query 01:41:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:41:59 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:41:59 Message to Master queued w/err=0: serial=205241 error=0 01:42:04 Received message from Master: op=Filter serial=205242 01:42:04 Color wheel filter change from 0 to 0 01:42:04 FLIGetFilterPos err=0 currentPosition=0 01:42:04 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:04 Filter is already there-color wheel unchanged 01:42:05 Received message from Master: op=Shutter serial=205243 01:42:05 Shutter LASER close 01:42:05 Received message from Camera: op=State serial=205245 01:42:05 GetSingleValue result=40 Value=cccccccc 01:42:05 SkyScan query 01:42:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:42:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:05 Parameters OK 01:42:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:05 Set A/D data flow result=40 01:42:05 Set A/D channel type result=40 01:42:05 Set A/D encoding result=40 01:42:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:05 Set channel filter=0.000000e+000 result=40 01:42:05 Config A/D Result=40 01:42:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:05 Get A/D filter: -9.255963e+061 result=40 01:42:05 Get A/D value=-858993460 result=40 01:42:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:05 Parameters OK 01:42:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:05 Set A/D data flow result=40 01:42:05 Set A/D channel type result=40 01:42:05 Set A/D encoding result=40 01:42:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:05 Set channel filter=0.000000e+000 result=40 01:42:05 Config A/D Result=40 01:42:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:05 Get A/D filter: -9.255963e+061 result=40 01:42:05 Get A/D value=-858993460 result=40 01:42:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:05 Aux= 01:42:05 Message to Camera, serial 205245 queued 01:42:42 Received message from Master: op=PointingHead serial=205258 01:42:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:42:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:42:42 Point started: ret=0 01:42:42 point_skyscan result=0 01:42:43 Check angles 01:42:43 SkyScan query 01:42:44 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.825<-13455 Statuses=0009 0009 01:42:44 Msec=0 True Az=152.955 Ze=-21.825 Az status=0009 Ze status=0009 01:42:44 Check angles 01:42:44 SkyScan query 01:42:45 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.825<-12055 Statuses=0009 0009 01:42:45 Msec=750 True Az=135.615 Ze=-0.825 Az status=0009 Ze status=0009 01:42:45 Check angles 01:42:45 SkyScan query 01:42:45 SkyScan query done: ret=0 az=118.005<-7867 ze=20.085<-10661 Statuses=0009 0009 01:42:45 Msec=1500 True Az=118.005 Ze=20.085 Az status=0009 Ze status=0009 01:42:45 Check angles 01:42:45 SkyScan query 01:42:46 SkyScan query done: ret=0 az=100.215<-6681 ze=41.61<-9226 Statuses=0009 0009 01:42:46 Msec=2250 True Az=100.215 Ze=41.61 Az status=0009 Ze status=0009 01:42:46 Check angles 01:42:46 SkyScan query 01:42:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 01:42:47 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 01:42:47 Check angles 01:42:47 SkyScan query 01:42:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 01:42:48 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 01:42:48 Message to Master queued w/err=0: serial=205258 error=0 01:42:53 Received message from Master: op=Filter serial=205259 01:42:53 Color wheel filter change from 0 to 0 01:42:53 FLIGetFilterPos err=0 currentPosition=0 01:42:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:42:53 Filter is already there-color wheel unchanged 01:42:53 Received message from Master: op=Shutter serial=205260 01:42:53 Shutter LASER close 01:42:53 Received message from Camera: op=State serial=205262 01:42:53 GetSingleValue result=40 Value=cccccccc 01:42:53 SkyScan query 01:42:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:42:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:53 Parameters OK 01:42:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:53 Set A/D data flow result=40 01:42:53 Set A/D channel type result=40 01:42:53 Set A/D encoding result=40 01:42:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:53 Set channel filter=0.000000e+000 result=40 01:42:53 Config A/D Result=40 01:42:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:53 Get A/D filter: -9.255963e+061 result=40 01:42:53 Get A/D value=-858993460 result=40 01:42:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:42:53 Parameters OK 01:42:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:42:53 Set A/D data flow result=40 01:42:53 Set A/D channel type result=40 01:42:53 Set A/D encoding result=40 01:42:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:42:53 Set channel filter=0.000000e+000 result=40 01:42:53 Config A/D Result=40 01:42:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:42:53 Get A/D filter: -9.255963e+061 result=40 01:42:53 Get A/D value=-858993460 result=40 01:42:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:42:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:42:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:42:53 Aux= 01:42:53 Message to Camera, serial 205262 queued 01:43:30 Received message from Master: op=PointingHead serial=205275 01:43:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:43:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:43:31 Point started: ret=0 01:43:31 point_skyscan result=0 01:43:31 Check angles 01:43:31 SkyScan query 01:43:32 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 01:43:32 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 01:43:32 Check angles 01:43:32 SkyScan query 01:43:33 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 01:43:33 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 01:43:33 Check angles 01:43:33 SkyScan query 01:43:33 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 01:43:33 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 01:43:34 Check angles 01:43:34 SkyScan query 01:43:34 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 01:43:34 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 01:43:34 Check angles 01:43:34 SkyScan query 01:43:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 01:43:35 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 01:43:35 Check angles 01:43:35 SkyScan query 01:43:36 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:43:36 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:43:36 Message to Master queued w/err=0: serial=205275 error=0 01:43:41 Received message from Master: op=Filter serial=205276 01:43:41 Color wheel filter change from 0 to 0 01:43:41 FLIGetFilterPos err=0 currentPosition=0 01:43:41 FLIGetStepsRemaining err=0 RemainingSteps=0 01:43:41 Filter is already there-color wheel unchanged 01:43:41 Received message from Master: op=Shutter serial=205277 01:43:41 Shutter LASER close 01:43:41 Received message from Camera: op=State serial=205279 01:43:41 GetSingleValue result=40 Value=cccccccc 01:43:41 SkyScan query 01:43:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:43:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:41 Parameters OK 01:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:41 Set A/D data flow result=40 01:43:41 Set A/D channel type result=40 01:43:41 Set A/D encoding result=40 01:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:41 Set channel filter=0.000000e+000 result=40 01:43:41 Config A/D Result=40 01:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:41 Get A/D filter: -9.255963e+061 result=40 01:43:41 Get A/D value=-858993460 result=40 01:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:43:41 Parameters OK 01:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:43:41 Set A/D data flow result=40 01:43:41 Set A/D channel type result=40 01:43:41 Set A/D encoding result=40 01:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:43:41 Set channel filter=0.000000e+000 result=40 01:43:41 Config A/D Result=40 01:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:43:41 Get A/D filter: -9.255963e+061 result=40 01:43:41 Get A/D value=-858993460 result=40 01:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:43:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:43:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:43:41 Aux= 01:43:41 Message to Camera, serial 205279 queued 01:44:18 Received message from Master: op=PointingHead serial=205292 01:44:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:44:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:44:19 Point started: ret=0 01:44:19 point_skyscan result=0 01:44:19 Check angles 01:44:19 SkyScan query 01:44:20 SkyScan query done: ret=0 az=153.165<-10211 ze=8.85<-11410 Statuses=0009 0009 01:44:20 Msec=0 True Az=153.165 Ze=8.85 Az status=0009 Ze status=0009 01:44:20 Check angles 01:44:20 SkyScan query 01:44:21 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.555<-12837 Statuses=0009 0009 01:44:21 Msec=750 True Az=135.3 Ze=-12.555 Az status=0009 Ze status=0009 01:44:21 Check angles 01:44:21 SkyScan query 01:44:21 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.555<-14237 Statuses=0009 0009 01:44:21 Msec=1500 True Az=117.795 Ze=-33.555 Az status=0009 Ze status=0009 01:44:22 Check angles 01:44:22 SkyScan query 01:44:22 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.57<-15438 Statuses=0009 0009 01:44:22 Msec=2250 True Az=100.44 Ze=-51.57 Az status=0009 Ze status=0009 01:44:22 Check angles 01:44:22 SkyScan query 01:44:23 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 01:44:23 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 01:44:23 Check angles 01:44:23 SkyScan query 01:44:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:44:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:44:24 Message to Master queued w/err=0: serial=205292 error=0 01:44:29 Received message from Master: op=Filter serial=205293 01:44:29 Color wheel filter change from 0 to 0 01:44:29 FLIGetFilterPos err=0 currentPosition=0 01:44:29 FLIGetStepsRemaining err=0 RemainingSteps=0 01:44:29 Filter is already there-color wheel unchanged 01:44:29 Received message from Master: op=Shutter serial=205294 01:44:29 Shutter LASER close 01:44:29 Received message from Camera: op=State serial=205296 01:44:29 GetSingleValue result=40 Value=cccccccc 01:44:29 SkyScan query 01:44:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:44:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:29 Parameters OK 01:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:29 Set A/D data flow result=40 01:44:29 Set A/D channel type result=40 01:44:29 Set A/D encoding result=40 01:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:29 Set channel filter=0.000000e+000 result=40 01:44:29 Config A/D Result=40 01:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:29 Get A/D filter: -9.255963e+061 result=40 01:44:29 Get A/D value=-858993460 result=40 01:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:44:29 Parameters OK 01:44:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:44:29 Set A/D data flow result=40 01:44:29 Set A/D channel type result=40 01:44:29 Set A/D encoding result=40 01:44:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:44:29 Set channel filter=0.000000e+000 result=40 01:44:29 Config A/D Result=40 01:44:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:44:29 Get A/D filter: -9.255963e+061 result=40 01:44:29 Get A/D value=-858993460 result=40 01:44:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:44:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:44:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:44:29 Aux= 01:44:29 Message to Camera, serial 205296 queued 01:45:05 Received message from Master: op=PointingHead serial=205308 01:45:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:45:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:45:06 Point started: ret=0 01:45:06 point_skyscan result=0 01:45:06 Check angles 01:45:06 SkyScan query 01:45:07 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.345<-17423 Statuses=0009 0009 01:45:07 Msec=0 True Az=109.125 Ze=-81.345 Az status=0009 Ze status=0009 01:45:07 Check angles 01:45:07 SkyScan query 01:45:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 01:45:08 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 01:45:08 Check angles 01:45:08 SkyScan query 01:45:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 01:45:09 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 01:45:09 Check angles 01:45:09 SkyScan query 01:45:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 01:45:09 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 01:45:10 Check angles 01:45:10 SkyScan query 01:45:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.99<-23066 Statuses=0008 0009 01:45:10 Msec=3000 True Az=112.995 Ze=-165.99 Az status=0008 Ze status=0009 01:45:10 Check angles 01:45:10 SkyScan query 01:45:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:45:11 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:45:11 Message to Master queued w/err=0: serial=205308 error=0 01:45:16 Received message from Master: op=Filter serial=205309 01:45:16 Color wheel filter change from 0 to 0 01:45:16 FLIGetFilterPos err=0 currentPosition=0 01:45:16 FLIGetStepsRemaining err=0 RemainingSteps=0 01:45:16 Filter is already there-color wheel unchanged 01:45:16 Received message from Master: op=Shutter serial=205310 01:45:16 Shutter LASER open 01:45:16 Received message from Camera: op=State serial=205312 01:45:16 GetSingleValue result=40 Value=cccccccc 01:45:16 SkyScan query 01:45:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:45:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:17 Parameters OK 01:45:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:17 Set A/D data flow result=40 01:45:17 Set A/D channel type result=40 01:45:17 Set A/D encoding result=40 01:45:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:17 Set channel filter=0.000000e+000 result=40 01:45:17 Config A/D Result=40 01:45:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:17 Get A/D filter: -9.255963e+061 result=40 01:45:17 Get A/D value=-858993460 result=40 01:45:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:17 Parameters OK 01:45:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:17 Set A/D data flow result=40 01:45:17 Set A/D channel type result=40 01:45:17 Set A/D encoding result=40 01:45:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:17 Set channel filter=0.000000e+000 result=40 01:45:17 Config A/D Result=40 01:45:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:17 Get A/D filter: -9.255963e+061 result=40 01:45:17 Get A/D value=-858993460 result=40 01:45:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:45:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:45:17 Aux= 01:45:17 Message to Camera, serial 205312 queued 01:45:25 Received message from Master: op=Shutter serial=205322 01:45:25 Shutter LASER close 01:45:26 Received message from Master: op=PointingHead serial=205326 01:45:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:45:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:45:26 Point started: ret=0 01:45:26 point_skyscan result=0 01:45:27 Check angles 01:45:27 SkyScan query 01:45:27 SkyScan query done: ret=0 az=89.61<-5974 ze=157.02<-1532 Statuses=0009 0009 01:45:27 Msec=0 True Az=89.61 Ze=157.02 Az status=0009 Ze status=0009 01:45:27 Received message from Master: op=Identify serial=205327 01:45:28 Check angles 01:45:28 SkyScan query 01:45:28 SkyScan query done: ret=0 az=71.82<-4788 ze=135.555<-2963 Statuses=0009 0009 01:45:28 Msec=750 True Az=71.82 Ze=135.555 Az status=0009 Ze status=0009 01:45:28 Check angles 01:45:28 SkyScan query 01:45:29 SkyScan query done: ret=0 az=54.42<-3628 ze=114.6<-4360 Statuses=0009 0009 01:45:29 Msec=1500 True Az=54.42 Ze=114.6 Az status=0009 Ze status=0009 01:45:29 Check angles 01:45:29 SkyScan query 01:45:30 SkyScan query done: ret=0 az=41.01<-2734 ze=93.705<-5753 Statuses=0009 0009 01:45:30 Msec=2250 True Az=41.01 Ze=93.705 Az status=0009 Ze status=0009 01:45:30 Check angles 01:45:30 SkyScan query 01:45:30 SkyScan query done: ret=0 az=40.98<-2732 ze=72.3<-7180 Statuses=0008 0009 01:45:30 Msec=3000 True Az=40.98 Ze=72.3 Az status=0008 Ze status=0009 01:45:31 Check angles 01:45:31 SkyScan query 01:45:31 SkyScan query done: ret=0 az=40.98<-2732 ze=52.185<-8521 Statuses=0008 0009 01:45:31 Msec=3750 True Az=40.98 Ze=52.185 Az status=0008 Ze status=0009 01:45:31 Check angles 01:45:31 SkyScan query 01:45:32 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 01:45:32 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 01:45:32 Message to Master queued w/err=0: serial=205326 error=0 01:45:37 Received message from Master: op=Filter serial=205330 01:45:37 Color wheel filter change from 0 to 0 01:45:37 FLIGetFilterPos err=0 currentPosition=0 01:45:37 FLIGetStepsRemaining err=0 RemainingSteps=0 01:45:37 Filter is already there-color wheel unchanged 01:45:37 Received message from Master: op=Shutter serial=205331 01:45:37 Shutter LASER close 01:45:37 Received message from Camera: op=State serial=205333 01:45:37 GetSingleValue result=40 Value=cccccccc 01:45:37 SkyScan query 01:45:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:45:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:38 Parameters OK 01:45:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:38 Set A/D data flow result=40 01:45:38 Set A/D channel type result=40 01:45:38 Set A/D encoding result=40 01:45:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:38 Set channel filter=0.000000e+000 result=40 01:45:38 Config A/D Result=40 01:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:38 Get A/D filter: -9.255963e+061 result=40 01:45:38 Get A/D value=-858993460 result=40 01:45:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:45:38 Parameters OK 01:45:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:45:38 Set A/D data flow result=40 01:45:38 Set A/D channel type result=40 01:45:38 Set A/D encoding result=40 01:45:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:45:38 Set channel filter=0.000000e+000 result=40 01:45:38 Config A/D Result=40 01:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:45:38 Get A/D filter: -9.255963e+061 result=40 01:45:38 Get A/D value=-858993460 result=40 01:45:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:45:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:45:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:45:38 Aux= 01:45:38 Message to Camera, serial 205333 queued 01:46:15 Received message from Master: op=PointingHead serial=205346 01:46:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:46:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:46:15 Point started: ret=0 01:46:15 point_skyscan result=0 01:46:16 Check angles 01:46:16 SkyScan query 01:46:16 SkyScan query done: ret=0 az=40.995<-2733 ze=21.69<-10554 Statuses=0008 0009 01:46:16 Msec=0 True Az=40.995 Ze=21.69 Az status=0008 Ze status=0009 01:46:17 Check angles [UTC 2018-12-17 01:46:17] 01:46:17 SkyScan query 01:46:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-1.44<-12096 Statuses=0008 0009 01:46:17 Msec=750 True Az=40.995 Ze=-1.44 Az status=0008 Ze status=0009 01:46:17 Check angles 01:46:17 SkyScan query 01:46:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.655<-13377 Statuses=0008 0009 01:46:18 Msec=1500 True Az=40.995 Ze=-20.655 Az status=0008 Ze status=0009 01:46:18 Check angles 01:46:18 SkyScan query 01:46:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 01:46:19 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 01:46:19 Check angles 01:46:19 SkyScan query 01:46:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:46:19 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:46:19 Message to Master queued w/err=0: serial=205346 error=0 01:46:24 Received message from Master: op=Filter serial=205347 01:46:24 Color wheel filter change from 0 to 0 01:46:24 FLIGetFilterPos err=0 currentPosition=0 01:46:24 FLIGetStepsRemaining err=0 RemainingSteps=0 01:46:24 Filter is already there-color wheel unchanged 01:46:25 Received message from Master: op=Shutter serial=205348 01:46:25 Shutter LASER close 01:46:25 Received message from Camera: op=State serial=205350 01:46:25 GetSingleValue result=40 Value=cccccccc 01:46:25 SkyScan query 01:46:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:46:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:25 Parameters OK 01:46:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:25 Set A/D data flow result=40 01:46:25 Set A/D channel type result=40 01:46:25 Set A/D encoding result=40 01:46:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:25 Set channel filter=0.000000e+000 result=40 01:46:25 Config A/D Result=40 01:46:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:25 Get A/D filter: -9.255963e+061 result=40 01:46:25 Get A/D value=-858993460 result=40 01:46:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:46:25 Parameters OK 01:46:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:46:25 Set A/D data flow result=40 01:46:25 Set A/D channel type result=40 01:46:25 Set A/D encoding result=40 01:46:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:46:25 Set channel filter=0.000000e+000 result=40 01:46:25 Config A/D Result=40 01:46:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:46:25 Get A/D filter: -9.255963e+061 result=40 01:46:25 Get A/D value=-858993460 result=40 01:46:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:46:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:46:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:46:25 Aux= 01:46:25 Message to Camera, serial 205350 queued 01:47:02 Received message from Master: op=PointingHead serial=205363 01:47:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:47:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:47:02 Point started: ret=0 01:47:02 point_skyscan result=0 01:47:03 Check angles 01:47:03 SkyScan query 01:47:04 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.145<-16543 Statuses=0009 0009 01:47:04 Msec=0 True Az=63.9 Ze=-68.145 Az status=0009 Ze status=0009 01:47:04 Check angles 01:47:04 SkyScan query 01:47:05 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.145<-17943 Statuses=0009 0009 01:47:05 Msec=750 True Az=81.375 Ze=-89.145 Az status=0009 Ze status=0009 01:47:05 Check angles 01:47:05 SkyScan query 01:47:05 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.535<-19369 Statuses=0009 0009 01:47:05 Msec=1500 True Az=99.195 Ze=-110.535 Az status=0009 Ze status=0009 01:47:06 Check angles 01:47:06 SkyScan query 01:47:06 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.52<-20768 Statuses=0009 0009 01:47:06 Msec=2250 True Az=116.685 Ze=-131.52 Az status=0009 Ze status=0009 01:47:06 Check angles 01:47:06 SkyScan query 01:47:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.57<-21438 Statuses=0009 0008 01:47:07 Msec=3000 True Az=131.01 Ze=-141.57 Az status=0009 Ze status=0008 01:47:07 Check angles 01:47:07 SkyScan query 01:47:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 01:47:08 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 01:47:08 Message to Master queued w/err=0: serial=205363 error=0 01:47:13 Received message from Master: op=Filter serial=205364 01:47:13 Color wheel filter change from 0 to 0 01:47:13 FLIGetFilterPos err=0 currentPosition=0 01:47:13 FLIGetStepsRemaining err=0 RemainingSteps=0 01:47:13 Filter is already there-color wheel unchanged 01:47:13 Received message from Master: op=Shutter serial=205365 01:47:13 Shutter LASER close 01:47:13 Received message from Camera: op=State serial=205367 01:47:13 GetSingleValue result=40 Value=cccccccc 01:47:13 SkyScan query 01:47:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:47:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:13 Parameters OK 01:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:13 Set A/D data flow result=40 01:47:13 Set A/D channel type result=40 01:47:13 Set A/D encoding result=40 01:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:13 Set channel filter=0.000000e+000 result=40 01:47:13 Config A/D Result=40 01:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:13 Get A/D filter: -9.255963e+061 result=40 01:47:13 Get A/D value=-858993460 result=40 01:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:13 Parameters OK 01:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:13 Set A/D data flow result=40 01:47:13 Set A/D channel type result=40 01:47:13 Set A/D encoding result=40 01:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:13 Set channel filter=0.000000e+000 result=40 01:47:13 Config A/D Result=40 01:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:13 Get A/D filter: -9.255963e+061 result=40 01:47:13 Get A/D value=-858993460 result=40 01:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:47:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:47:13 Aux= 01:47:13 Message to Camera, serial 205367 queued 01:47:50 Received message from Master: op=PointingHead serial=205380 01:47:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:47:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:47:51 Point started: ret=0 01:47:51 point_skyscan result=0 01:47:51 Check angles 01:47:51 SkyScan query 01:47:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 01:47:52 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 01:47:52 Check angles 01:47:52 SkyScan query 01:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:47:53 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:47:53 Message to Master queued w/err=0: serial=205380 error=0 01:47:58 Received message from Master: op=Filter serial=205381 01:47:58 Color wheel filter change from 0 to 0 01:47:58 FLIGetFilterPos err=0 currentPosition=0 01:47:58 FLIGetStepsRemaining err=0 RemainingSteps=0 01:47:58 Filter is already there-color wheel unchanged 01:47:58 Received message from Master: op=Shutter serial=205382 01:47:58 Shutter LASER open 01:47:58 Received message from Camera: op=State serial=205384 01:47:58 GetSingleValue result=40 Value=cccccccc 01:47:58 SkyScan query 01:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:47:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:59 Parameters OK 01:47:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:59 Set A/D data flow result=40 01:47:59 Set A/D channel type result=40 01:47:59 Set A/D encoding result=40 01:47:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:59 Set channel filter=0.000000e+000 result=40 01:47:59 Config A/D Result=40 01:47:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:59 Get A/D filter: -9.255963e+061 result=40 01:47:59 Get A/D value=-858993460 result=40 01:47:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:47:59 Parameters OK 01:47:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:47:59 Set A/D data flow result=40 01:47:59 Set A/D channel type result=40 01:47:59 Set A/D encoding result=40 01:47:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:47:59 Set channel filter=0.000000e+000 result=40 01:47:59 Config A/D Result=40 01:47:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:47:59 Get A/D filter: -9.255963e+061 result=40 01:47:59 Get A/D value=-858993460 result=40 01:47:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:47:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:47:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:47:59 Aux= 01:47:59 Message to Camera, serial 205384 queued 01:48:07 Received message from Master: op=Shutter serial=205394 01:48:07 Shutter LASER close 01:48:08 Received message from Master: op=PointingHead serial=205398 01:48:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:48:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:48:08 Point started: ret=0 01:48:08 point_skyscan result=0 01:48:09 Check angles 01:48:09 SkyScan query 01:48:09 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.145<-21543 Statuses=0009 0009 01:48:09 Msec=0 True Az=136.14 Ze=-143.145 Az status=0009 Ze status=0009 01:48:09 Check angles 01:48:09 SkyScan query 01:48:10 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.145<-20143 Statuses=0009 0009 01:48:10 Msec=750 True Az=153.615 Ze=-122.145 Az status=0009 Ze status=0009 01:48:10 Check angles 01:48:10 SkyScan query 01:48:11 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.235<-18749 Statuses=0009 0009 01:48:11 Msec=1500 True Az=171.225 Ze=-101.235 Az status=0009 Ze status=0009 01:48:11 Check angles 01:48:11 SkyScan query 01:48:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.31<-17354 Statuses=0008 0009 01:48:12 Msec=2250 True Az=176.01 Ze=-80.31 Az status=0008 Ze status=0009 01:48:12 Check angles 01:48:12 SkyScan query 01:48:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.845<-15923 Statuses=0008 0009 01:48:12 Msec=3000 True Az=175.995 Ze=-58.845 Az status=0008 Ze status=0009 01:48:12 Check angles 01:48:12 SkyScan query 01:48:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:48:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:48:13 Message to Master queued w/err=0: serial=205398 error=0 01:48:18 Received message from Master: op=Filter serial=205399 01:48:18 Color wheel filter change from 0 to 0 01:48:18 FLIGetFilterPos err=0 currentPosition=0 01:48:18 FLIGetStepsRemaining err=0 RemainingSteps=0 01:48:18 Filter is already there-color wheel unchanged 01:48:18 Received message from Master: op=Shutter serial=205400 01:48:18 Shutter LASER close 01:48:18 Received message from Camera: op=State serial=205402 01:48:18 GetSingleValue result=40 Value=cccccccc 01:48:18 SkyScan query 01:48:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:48:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:19 Parameters OK 01:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:19 Set A/D data flow result=40 01:48:19 Set A/D channel type result=40 01:48:19 Set A/D encoding result=40 01:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:19 Set channel filter=0.000000e+000 result=40 01:48:19 Config A/D Result=40 01:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:19 Get A/D filter: -9.255963e+061 result=40 01:48:19 Get A/D value=-858993460 result=40 01:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:48:19 Parameters OK 01:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:48:19 Set A/D data flow result=40 01:48:19 Set A/D channel type result=40 01:48:19 Set A/D encoding result=40 01:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:48:19 Set channel filter=0.000000e+000 result=40 01:48:19 Config A/D Result=40 01:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:48:19 Get A/D filter: -9.255963e+061 result=40 01:48:19 Get A/D value=-858993460 result=40 01:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:48:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:48:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:48:19 Aux= 01:48:19 Message to Camera, serial 205402 queued 01:48:56 Received message from Master: op=PointingHead serial=205415 01:48:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:48:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:48:56 Point started: ret=0 01:48:56 point_skyscan result=0 01:48:57 Check angles 01:48:57 SkyScan query 01:48:58 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.405<-13427 Statuses=0009 0009 01:48:58 Msec=0 True Az=152.775 Ze=-21.405 Az status=0009 Ze status=0009 01:48:58 Check angles 01:48:58 SkyScan query 01:48:58 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.45<-12030 Statuses=0009 0009 01:48:58 Msec=750 True Az=135.24 Ze=-0.45 Az status=0009 Ze status=0009 01:48:59 Check angles 01:48:59 SkyScan query 01:48:59 SkyScan query done: ret=0 az=117.345<-7823 ze=21<-10600 Statuses=0009 0009 01:48:59 Msec=1500 True Az=117.345 Ze=21 Az status=0009 Ze status=0009 01:48:59 Check angles 01:48:59 SkyScan query 01:49:00 SkyScan query done: ret=0 az=100.005<-6667 ze=41.895<-9207 Statuses=0009 0009 01:49:00 Msec=2250 True Az=100.005 Ze=41.895 Az status=0009 Ze status=0009 01:49:00 Check angles 01:49:00 SkyScan query 01:49:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 01:49:01 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 01:49:01 Check angles 01:49:01 SkyScan query 01:49:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:49:01 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 01:49:01 Message to Master queued w/err=0: serial=205415 error=0 01:49:06 Received message from Master: op=Filter serial=205416 01:49:06 Color wheel filter change from 0 to 0 01:49:06 FLIGetFilterPos err=0 currentPosition=0 01:49:06 FLIGetStepsRemaining err=0 RemainingSteps=0 01:49:06 Filter is already there-color wheel unchanged 01:49:07 Received message from Master: op=Shutter serial=205417 01:49:07 Shutter LASER close 01:49:07 Received message from Camera: op=State serial=205419 01:49:07 GetSingleValue result=40 Value=cccccccc 01:49:07 SkyScan query 01:49:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:49:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:07 Parameters OK 01:49:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:07 Set A/D data flow result=40 01:49:07 Set A/D channel type result=40 01:49:07 Set A/D encoding result=40 01:49:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:07 Set channel filter=0.000000e+000 result=40 01:49:07 Config A/D Result=40 01:49:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:07 Get A/D filter: -9.255963e+061 result=40 01:49:07 Get A/D value=-858993460 result=40 01:49:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:07 Parameters OK 01:49:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:07 Set A/D data flow result=40 01:49:07 Set A/D channel type result=40 01:49:07 Set A/D encoding result=40 01:49:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:07 Set channel filter=0.000000e+000 result=40 01:49:07 Config A/D Result=40 01:49:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:07 Get A/D filter: -9.255963e+061 result=40 01:49:07 Get A/D value=-858993460 result=40 01:49:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:49:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:49:07 Aux= 01:49:07 Message to Camera, serial 205419 queued 01:49:44 Received message from Master: op=PointingHead serial=205432 01:49:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:49:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:49:44 Point started: ret=0 01:49:44 point_skyscan result=0 01:49:45 Check angles 01:49:45 SkyScan query 01:49:46 SkyScan query done: ret=0 az=109.08<-7272 ze=38.475<-9435 Statuses=0009 0008 01:49:46 Msec=0 True Az=109.08 Ze=38.475 Az status=0009 Ze status=0008 01:49:46 Check angles 01:49:46 SkyScan query 01:49:46 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 01:49:46 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 01:49:47 Check angles 01:49:47 SkyScan query 01:49:47 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 01:49:47 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 01:49:47 Check angles 01:49:47 SkyScan query 01:49:48 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 01:49:48 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 01:49:48 Check angles 01:49:48 SkyScan query 01:49:49 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:49:49 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:49:49 Check angles 01:49:49 SkyScan query 01:49:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:49:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:49:49 Message to Master queued w/err=0: serial=205432 error=0 01:49:54 Received message from Master: op=Filter serial=205433 01:49:54 Color wheel filter change from 0 to 0 01:49:54 FLIGetFilterPos err=0 currentPosition=0 01:49:54 FLIGetStepsRemaining err=0 RemainingSteps=0 01:49:54 Filter is already there-color wheel unchanged 01:49:55 Received message from Master: op=Shutter serial=205434 01:49:55 Shutter LASER close 01:49:55 Received message from Camera: op=State serial=205436 01:49:55 GetSingleValue result=40 Value=cccccccc 01:49:55 SkyScan query 01:49:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:49:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:55 Parameters OK 01:49:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:55 Set A/D data flow result=40 01:49:55 Set A/D channel type result=40 01:49:55 Set A/D encoding result=40 01:49:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:55 Set channel filter=0.000000e+000 result=40 01:49:55 Config A/D Result=40 01:49:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:55 Get A/D filter: -9.255963e+061 result=40 01:49:55 Get A/D value=-858993460 result=40 01:49:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:49:55 Parameters OK 01:49:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:49:55 Set A/D data flow result=40 01:49:55 Set A/D channel type result=40 01:49:55 Set A/D encoding result=40 01:49:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:49:55 Set channel filter=0.000000e+000 result=40 01:49:55 Config A/D Result=40 01:49:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:49:55 Get A/D filter: -9.255963e+061 result=40 01:49:55 Get A/D value=-858993460 result=40 01:49:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:49:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:49:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:49:55 Aux= 01:49:55 Message to Camera, serial 205436 queued 01:50:32 Received message from Master: op=PointingHead serial=205449 01:50:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:50:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:50:32 Point started: ret=0 01:50:32 point_skyscan result=0 01:50:33 Check angles 01:50:33 SkyScan query 01:50:34 SkyScan query done: ret=0 az=152.97<-10198 ze=8.685<-11421 Statuses=0009 0009 01:50:34 Msec=0 True Az=152.97 Ze=8.685 Az status=0009 Ze status=0009 01:50:34 Check angles 01:50:34 SkyScan query 01:50:35 SkyScan query done: ret=0 az=135.585<-9039 ze=-12.285<-12819 Statuses=0009 0009 01:50:35 Msec=750 True Az=135.585 Ze=-12.285 Az status=0009 Ze status=0009 01:50:35 Check angles 01:50:35 SkyScan query 01:50:35 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.24<-14216 Statuses=0009 0009 01:50:35 Msec=1500 True Az=118.005 Ze=-33.24 Az status=0009 Ze status=0009 01:50:35 Check angles 01:50:35 SkyScan query 01:50:36 SkyScan query done: ret=0 az=100.65<-6710 ze=-51.54<-15436 Statuses=0009 0009 01:50:36 Msec=2250 True Az=100.65 Ze=-51.54 Az status=0009 Ze status=0009 01:50:36 Check angles 01:50:36 SkyScan query 01:50:37 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 01:50:37 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 01:50:37 Check angles 01:50:37 SkyScan query 01:50:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:50:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 01:50:38 Message to Master queued w/err=0: serial=205449 error=0 01:50:43 Received message from Master: op=Filter serial=205450 01:50:43 Color wheel filter change from 0 to 0 01:50:43 FLIGetFilterPos err=0 currentPosition=0 01:50:43 FLIGetStepsRemaining err=0 RemainingSteps=0 01:50:43 Filter is already there-color wheel unchanged 01:50:43 Received message from Master: op=Shutter serial=205451 01:50:43 Shutter LASER close 01:50:43 Received message from Camera: op=State serial=205453 01:50:43 GetSingleValue result=40 Value=cccccccc 01:50:43 SkyScan query 01:50:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:50:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:43 Parameters OK 01:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:43 Set A/D data flow result=40 01:50:43 Set A/D channel type result=40 01:50:43 Set A/D encoding result=40 01:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:43 Set channel filter=0.000000e+000 result=40 01:50:43 Config A/D Result=40 01:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:43 Get A/D filter: -9.255963e+061 result=40 01:50:43 Get A/D value=-858993460 result=40 01:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:50:43 Parameters OK 01:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:50:43 Set A/D data flow result=40 01:50:43 Set A/D channel type result=40 01:50:43 Set A/D encoding result=40 01:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:50:43 Set channel filter=0.000000e+000 result=40 01:50:43 Config A/D Result=40 01:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:50:43 Get A/D filter: -9.255963e+061 result=40 01:50:43 Get A/D value=-858993460 result=40 01:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:50:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:50:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:50:43 Aux= 01:50:43 Message to Camera, serial 205453 queued 01:51:20 Received message from Master: op=PointingHead serial=205466 01:51:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:51:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:51:20 Point started: ret=0 01:51:20 point_skyscan result=0 01:51:21 Check angles 01:51:21 SkyScan query 01:51:22 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.3<-17420 Statuses=0009 0009 01:51:22 Msec=0 True Az=108.975 Ze=-81.3 Az status=0009 Ze status=0009 01:51:22 Check angles 01:51:22 SkyScan query 01:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 01:51:23 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 01:51:23 Check angles 01:51:23 SkyScan query 01:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 01:51:23 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 01:51:23 Check angles 01:51:23 SkyScan query 01:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.18<-21612 Statuses=0008 0009 01:51:24 Msec=2250 True Az=112.995 Ze=-144.18 Az status=0008 Ze status=0009 01:51:24 Check angles 01:51:24 SkyScan query 01:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 01:51:25 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 01:51:25 Check angles 01:51:25 SkyScan query 01:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:51:26 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:51:26 Message to Master queued w/err=0: serial=205466 error=0 01:51:31 Received message from Master: op=Filter serial=205467 01:51:31 Color wheel filter change from 0 to 0 01:51:31 FLIGetFilterPos err=0 currentPosition=0 01:51:31 FLIGetStepsRemaining err=0 RemainingSteps=0 01:51:31 Filter is already there-color wheel unchanged 01:51:31 Received message from Master: op=Shutter serial=205468 01:51:31 Shutter LASER open 01:51:31 Received message from Camera: op=State serial=205470 01:51:31 GetSingleValue result=40 Value=cccccccc 01:51:31 SkyScan query 01:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:51:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:32 Parameters OK 01:51:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:32 Set A/D data flow result=40 01:51:32 Set A/D channel type result=40 01:51:32 Set A/D encoding result=40 01:51:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:32 Set channel filter=0.000000e+000 result=40 01:51:32 Config A/D Result=40 01:51:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:32 Get A/D filter: -9.255963e+061 result=40 01:51:32 Get A/D value=-858993460 result=40 01:51:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:32 Parameters OK 01:51:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:32 Set A/D data flow result=40 01:51:32 Set A/D channel type result=40 01:51:32 Set A/D encoding result=40 01:51:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:32 Set channel filter=0.000000e+000 result=40 01:51:32 Config A/D Result=40 01:51:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:32 Get A/D filter: -9.255963e+061 result=40 01:51:32 Get A/D value=-858993460 result=40 01:51:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:51:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:51:32 Aux= 01:51:32 Message to Camera, serial 205470 queued 01:51:40 Received message from Master: op=Shutter serial=205480 01:51:40 Shutter LASER close 01:51:40 Received message from Master: op=PointingHead serial=205484 01:51:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:51:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:51:41 Point started: ret=0 01:51:41 point_skyscan result=0 01:51:41 Check angles 01:51:41 SkyScan query 01:51:42 SkyScan query done: ret=0 az=89.835<-5989 ze=157.245<-1517 Statuses=0009 0009 01:51:42 Msec=0 True Az=89.835 Ze=157.245 Az status=0009 Ze status=0009 01:51:42 Check angles 01:51:42 SkyScan query 01:51:43 SkyScan query done: ret=0 az=72<-4800 ze=135.87<-2942 Statuses=0009 0009 01:51:43 Msec=750 True Az=72 Ze=135.87 Az status=0009 Ze status=0009 01:51:43 Check angles 01:51:43 SkyScan query 01:51:44 SkyScan query done: ret=0 az=54.345<-3623 ze=114.39<-4374 Statuses=0009 0009 01:51:44 Msec=1500 True Az=54.345 Ze=114.39 Az status=0009 Ze status=0009 01:51:44 Check angles 01:51:44 SkyScan query 01:51:44 SkyScan query done: ret=0 az=40.995<-2733 ze=93.495<-5767 Statuses=0009 0009 01:51:44 Msec=2250 True Az=40.995 Ze=93.495 Az status=0009 Ze status=0009 01:51:44 Check angles 01:51:44 SkyScan query 01:51:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 01:51:45 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 01:51:45 Check angles 01:51:45 SkyScan query 01:51:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 01:51:46 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 01:51:46 Check angles 01:51:46 SkyScan query 01:51:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:51:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:51:47 Message to Master queued w/err=0: serial=205484 error=0 01:51:52 Received message from Master: op=Filter serial=205485 01:51:52 Color wheel filter change from 0 to 0 01:51:52 FLIGetFilterPos err=0 currentPosition=0 01:51:52 FLIGetStepsRemaining err=0 RemainingSteps=0 01:51:52 Filter is already there-color wheel unchanged 01:51:52 Received message from Master: op=Shutter serial=205486 01:51:52 Shutter LASER close 01:51:52 Received message from Camera: op=State serial=205488 01:51:52 GetSingleValue result=40 Value=cccccccc 01:51:52 SkyScan query 01:51:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:51:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:52 Parameters OK 01:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:52 Set A/D data flow result=40 01:51:52 Set A/D channel type result=40 01:51:52 Set A/D encoding result=40 01:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:52 Set channel filter=0.000000e+000 result=40 01:51:52 Config A/D Result=40 01:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:52 Get A/D filter: -9.255963e+061 result=40 01:51:52 Get A/D value=-858993460 result=40 01:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:51:52 Parameters OK 01:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:51:52 Set A/D data flow result=40 01:51:52 Set A/D channel type result=40 01:51:52 Set A/D encoding result=40 01:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:51:52 Set channel filter=0.000000e+000 result=40 01:51:52 Config A/D Result=40 01:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:51:52 Get A/D filter: -9.255963e+061 result=40 01:51:52 Get A/D value=-858993460 result=40 01:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:51:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:51:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:51:52 Aux= 01:51:52 Message to Camera, serial 205488 queued 01:52:29 Received message from Master: op=PointingHead serial=205501 01:52:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:52:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:52:30 Point started: ret=0 01:52:30 point_skyscan result=0 01:52:31 Check angles 01:52:31 SkyScan query 01:52:31 SkyScan query done: ret=0 az=40.995<-2733 ze=21.81<-10546 Statuses=0008 0009 01:52:31 Msec=0 True Az=40.995 Ze=21.81 Az status=0008 Ze status=0009 01:52:31 Check angles 01:52:31 SkyScan query 01:52:32 SkyScan query done: ret=0 az=41.01<-2734 ze=0.45<-11970 Statuses=0008 0009 01:52:32 Msec=750 True Az=41.01 Ze=0.45 Az status=0008 Ze status=0009 01:52:32 Check angles 01:52:32 SkyScan query 01:52:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.52<-13368 Statuses=0008 0009 01:52:33 Msec=1500 True Az=40.995 Ze=-20.52 Az status=0008 Ze status=0009 01:52:33 Check angles 01:52:33 SkyScan query 01:52:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 01:52:33 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 01:52:34 Check angles 01:52:34 SkyScan query 01:52:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:52:34 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:52:34 Message to Master queued w/err=0: serial=205501 error=0 01:52:39 Received message from Master: op=Filter serial=205502 01:52:39 Color wheel filter change from 0 to 0 01:52:39 FLIGetFilterPos err=0 currentPosition=0 01:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 01:52:39 Filter is already there-color wheel unchanged 01:52:39 Received message from Master: op=Shutter serial=205503 01:52:39 Shutter LASER close 01:52:39 Received message from Camera: op=State serial=205505 01:52:39 GetSingleValue result=40 Value=cccccccc 01:52:39 SkyScan query 01:52:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:52:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:40 Parameters OK 01:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:40 Set A/D data flow result=40 01:52:40 Set A/D channel type result=40 01:52:40 Set A/D encoding result=40 01:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:40 Set channel filter=0.000000e+000 result=40 01:52:40 Config A/D Result=40 01:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:40 Get A/D filter: -9.255963e+061 result=40 01:52:40 Get A/D value=-858993460 result=40 01:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:52:40 Parameters OK 01:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:52:40 Set A/D data flow result=40 01:52:40 Set A/D channel type result=40 01:52:40 Set A/D encoding result=40 01:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:52:40 Set channel filter=0.000000e+000 result=40 01:52:40 Config A/D Result=40 01:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:52:40 Get A/D filter: -9.255963e+061 result=40 01:52:40 Get A/D value=-858993460 result=40 01:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:52:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:52:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:52:40 Aux= 01:52:40 Message to Camera, serial 205505 queued 01:53:17 Received message from Master: op=PointingHead serial=205518 01:53:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:53:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:53:17 Point started: ret=0 01:53:17 point_skyscan result=0 01:53:18 Check angles 01:53:18 SkyScan query 01:53:18 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.76<-16584 Statuses=0009 0009 01:53:18 Msec=0 True Az=64.41 Ze=-68.76 Az status=0009 Ze status=0009 01:53:19 Check angles 01:53:19 SkyScan query 01:53:19 SkyScan query done: ret=0 az=82.05<-5470 ze=-89.73<-17982 Statuses=0009 0009 01:53:19 Msec=750 True Az=82.05 Ze=-89.73 Az status=0009 Ze status=0009 01:53:19 Check angles 01:53:19 SkyScan query 01:53:20 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.73<-19382 Statuses=0009 0009 01:53:20 Msec=1500 True Az=99.54 Ze=-110.73 Az status=0009 Ze status=0009 01:53:20 Check angles 01:53:20 SkyScan query 01:53:21 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.61<-20774 Statuses=0009 0009 01:53:21 Msec=2250 True Az=116.91 Ze=-131.61 Az status=0009 Ze status=0009 01:53:21 Check angles 01:53:21 SkyScan query 01:53:21 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.57<-21438 Statuses=0009 0008 01:53:21 Msec=3000 True Az=131.07 Ze=-141.57 Az status=0009 Ze status=0008 01:53:22 Check angles 01:53:22 SkyScan query 01:53:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 01:53:22 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 01:53:22 Message to Master queued w/err=0: serial=205518 error=0 01:53:27 Received message from Master: op=Filter serial=205519 01:53:27 Color wheel filter change from 0 to 0 01:53:27 FLIGetFilterPos err=0 currentPosition=0 01:53:27 FLIGetStepsRemaining err=0 RemainingSteps=0 01:53:27 Filter is already there-color wheel unchanged 01:53:27 Received message from Master: op=Shutter serial=205520 01:53:27 Shutter LASER close 01:53:27 Received message from Camera: op=State serial=205522 01:53:27 GetSingleValue result=40 Value=cccccccc 01:53:27 SkyScan query 01:53:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:53:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:28 Parameters OK 01:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:28 Set A/D data flow result=40 01:53:28 Set A/D channel type result=40 01:53:28 Set A/D encoding result=40 01:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:28 Set channel filter=0.000000e+000 result=40 01:53:28 Config A/D Result=40 01:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:28 Get A/D filter: -9.255963e+061 result=40 01:53:28 Get A/D value=-858993460 result=40 01:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:53:28 Parameters OK 01:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:53:28 Set A/D data flow result=40 01:53:28 Set A/D channel type result=40 01:53:28 Set A/D encoding result=40 01:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:53:28 Set channel filter=0.000000e+000 result=40 01:53:28 Config A/D Result=40 01:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:53:28 Get A/D filter: -9.255963e+061 result=40 01:53:28 Get A/D value=-858993460 result=40 01:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:53:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:53:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:53:28 Aux= 01:53:28 Message to Camera, serial 205522 queued 01:54:04 Received message from Master: op=PointingHead serial=205534 01:54:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:54:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:54:04 Point started: ret=0 01:54:04 point_skyscan result=0 01:54:05 Check angles 01:54:05 SkyScan query 01:54:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 01:54:06 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 01:54:06 Check angles 01:54:06 SkyScan query 01:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 01:54:06 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 01:54:06 Message to Master queued w/err=0: serial=205534 error=0 01:54:11 Received message from Master: op=Filter serial=205535 01:54:11 Color wheel filter change from 0 to 0 01:54:11 FLIGetFilterPos err=0 currentPosition=0 01:54:11 FLIGetStepsRemaining err=0 RemainingSteps=0 01:54:11 Filter is already there-color wheel unchanged 01:54:11 Received message from Master: op=Shutter serial=205536 01:54:11 Shutter LASER open 01:54:12 Received message from Camera: op=State serial=205538 01:54:12 GetSingleValue result=40 Value=cccccccc 01:54:12 SkyScan query 01:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:54:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:12 Parameters OK 01:54:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:12 Set A/D data flow result=40 01:54:12 Set A/D channel type result=40 01:54:12 Set A/D encoding result=40 01:54:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:12 Set channel filter=0.000000e+000 result=40 01:54:12 Config A/D Result=40 01:54:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:12 Get A/D filter: -9.255963e+061 result=40 01:54:12 Get A/D value=-858993460 result=40 01:54:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:12 Parameters OK 01:54:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:12 Set A/D data flow result=40 01:54:12 Set A/D channel type result=40 01:54:12 Set A/D encoding result=40 01:54:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:12 Set channel filter=0.000000e+000 result=40 01:54:12 Config A/D Result=40 01:54:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:12 Get A/D filter: -9.255963e+061 result=40 01:54:12 Get A/D value=-858993460 result=40 01:54:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:54:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:54:12 Aux= 01:54:12 Message to Camera, serial 205538 queued 01:54:21 Received message from Master: op=Shutter serial=205548 01:54:21 Shutter LASER close 01:54:21 Received message from Master: op=PointingHead serial=205552 01:54:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 01:54:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 01:54:22 Point started: ret=0 01:54:22 point_skyscan result=0 01:54:22 Check angles 01:54:22 SkyScan query 01:54:23 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.25<-21550 Statuses=0009 0009 01:54:23 Msec=0 True Az=136.005 Ze=-143.25 Az status=0009 Ze status=0009 01:54:23 Check angles 01:54:23 SkyScan query 01:54:24 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.235<-20149 Statuses=0009 0009 01:54:24 Msec=750 True Az=153.495 Ze=-122.235 Az status=0009 Ze status=0009 01:54:24 Check angles 01:54:24 SkyScan query 01:54:24 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.785<-18719 Statuses=0009 0009 01:54:24 Msec=1500 True Az=171.45 Ze=-100.785 Az status=0009 Ze status=0009 01:54:25 Check angles 01:54:25 SkyScan query 01:54:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.95<-17330 Statuses=0008 0009 01:54:25 Msec=2250 True Az=176.01 Ze=-79.95 Az status=0008 Ze status=0009 01:54:25 Check angles 01:54:25 SkyScan query 01:54:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 01:54:26 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 01:54:26 Check angles 01:54:26 SkyScan query 01:54:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 01:54:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 01:54:27 Message to Master queued w/err=0: serial=205552 error=0 01:54:32 Received message from Master: op=Filter serial=205553 01:54:32 Color wheel filter change from 0 to 0 01:54:32 FLIGetFilterPos err=0 currentPosition=0 01:54:32 FLIGetStepsRemaining err=0 RemainingSteps=0 01:54:32 Filter is already there-color wheel unchanged 01:54:32 Received message from Master: op=Shutter serial=205554 01:54:32 Shutter LASER close 01:54:32 Received message from Camera: op=State serial=205556 01:54:32 GetSingleValue result=40 Value=cccccccc 01:54:32 SkyScan query 01:54:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 01:54:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:33 Parameters OK 01:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:33 Set A/D data flow result=40 01:54:33 Set A/D channel type result=40 01:54:33 Set A/D encoding result=40 01:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:33 Set channel filter=0.000000e+000 result=40 01:54:33 Config A/D Result=40 01:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:33 Get A/D filter: -9.255963e+061 result=40 01:54:33 Get A/D value=-858993460 result=40 01:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:54:33 Parameters OK 01:54:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:54:33 Set A/D data flow result=40 01:54:33 Set A/D channel type result=40 01:54:33 Set A/D encoding result=40 01:54:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:54:33 Set channel filter=0.000000e+000 result=40 01:54:33 Config A/D Result=40 01:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:54:33 Get A/D filter: -9.255963e+061 result=40 01:54:33 Get A/D value=-858993460 result=40 01:54:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:54:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:54:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:54:33 Aux= 01:54:33 Message to Camera, serial 205556 queued 01:55:09 Received message from Master: op=PointingHead serial=205569 01:55:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 01:55:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 01:55:10 Point started: ret=0 01:55:10 point_skyscan result=0 01:55:11 Check angles 01:55:11 SkyScan query 01:55:11 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.84<-13456 Statuses=0009 0009 01:55:11 Msec=0 True Az=152.97 Ze=-21.84 Az status=0009 Ze status=0009 01:55:11 Check angles 01:55:11 SkyScan query 01:55:12 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.84<-12056 Statuses=0009 0009 01:55:12 Msec=750 True Az=135.615 Ze=-0.84 Az status=0009 Ze status=0009 01:55:12 Check angles 01:55:12 SkyScan query 01:55:13 SkyScan query done: ret=0 az=118.05<-7870 ze=20.085<-10661 Statuses=0009 0009 01:55:13 Msec=1500 True Az=118.05 Ze=20.085 Az status=0009 Ze status=0009 01:55:13 Check angles 01:55:13 SkyScan query 01:55:13 SkyScan query done: ret=0 az=100.695<-6713 ze=41.07<-9262 Statuses=0009 0009 01:55:13 Msec=2250 True Az=100.695 Ze=41.07 Az status=0009 Ze status=0009 01:55:14 Check angles 01:55:14 SkyScan query 01:55:14 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 01:55:14 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 01:55:14 Check angles 01:55:14 SkyScan query 01:55:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 01:55:15 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 01:55:15 Message to Master queued w/err=0: serial=205569 error=0 01:55:20 Received message from Master: op=Filter serial=205570 01:55:20 Color wheel filter change from 0 to 0 01:55:20 FLIGetFilterPos err=0 currentPosition=0 01:55:20 FLIGetStepsRemaining err=0 RemainingSteps=0 01:55:20 Filter is already there-color wheel unchanged 01:55:20 Received message from Master: op=Shutter serial=205571 01:55:20 Shutter LASER close 01:55:20 Received message from Camera: op=State serial=205573 01:55:20 GetSingleValue result=40 Value=cccccccc 01:55:20 SkyScan query 01:55:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 01:55:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:21 Parameters OK 01:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:21 Set A/D data flow result=40 01:55:21 Set A/D channel type result=40 01:55:21 Set A/D encoding result=40 01:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:21 Set channel filter=0.000000e+000 result=40 01:55:21 Config A/D Result=40 01:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:21 Get A/D filter: -9.255963e+061 result=40 01:55:21 Get A/D value=-858993460 result=40 01:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:55:21 Parameters OK 01:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:55:21 Set A/D data flow result=40 01:55:21 Set A/D channel type result=40 01:55:21 Set A/D encoding result=40 01:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:55:21 Set channel filter=0.000000e+000 result=40 01:55:21 Config A/D Result=40 01:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:55:21 Get A/D filter: -9.255963e+061 result=40 01:55:21 Get A/D value=-858993460 result=40 01:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:55:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:55:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:55:21 Aux= 01:55:21 Message to Camera, serial 205573 queued [UTC 2018-12-17 01:55:52] 01:55:57 Received message from Master: op=PointingHead serial=205586 01:55:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 01:55:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 01:55:58 Point started: ret=0 01:55:58 point_skyscan result=0 01:55:59 Check angles 01:55:59 SkyScan query 01:55:59 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 01:55:59 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 01:55:59 Check angles 01:55:59 SkyScan query 01:56:00 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 01:56:00 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 01:56:00 Check angles 01:56:00 SkyScan query 01:56:01 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 01:56:01 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 01:56:01 Check angles 01:56:01 SkyScan query 01:56:01 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 01:56:01 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 01:56:02 Check angles 01:56:02 SkyScan query 01:56:02 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 01:56:02 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 01:56:02 Check angles 01:56:02 SkyScan query 01:56:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 01:56:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 01:56:03 Message to Master queued w/err=0: serial=205586 error=0 01:56:08 Received message from Master: op=Filter serial=205587 01:56:08 Color wheel filter change from 0 to 0 01:56:08 FLIGetFilterPos err=0 currentPosition=0 01:56:08 FLIGetStepsRemaining err=0 RemainingSteps=0 01:56:08 Filter is already there-color wheel unchanged 01:56:08 Received message from Master: op=Shutter serial=205588 01:56:08 Shutter LASER close 01:56:08 Received message from Camera: op=State serial=205590 01:56:08 GetSingleValue result=40 Value=cccccccc 01:56:08 SkyScan query 01:56:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 01:56:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:09 Parameters OK 01:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:09 Set A/D data flow result=40 01:56:09 Set A/D channel type result=40 01:56:09 Set A/D encoding result=40 01:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:09 Set channel filter=0.000000e+000 result=40 01:56:09 Config A/D Result=40 01:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:09 Get A/D filter: -9.255963e+061 result=40 01:56:09 Get A/D value=-858993460 result=40 01:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:09 Parameters OK 01:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:09 Set A/D data flow result=40 01:56:09 Set A/D channel type result=40 01:56:09 Set A/D encoding result=40 01:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:09 Set channel filter=0.000000e+000 result=40 01:56:09 Config A/D Result=40 01:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:09 Get A/D filter: -9.255963e+061 result=40 01:56:09 Get A/D value=-858993460 result=40 01:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:56:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:56:09 Aux= 01:56:09 Message to Camera, serial 205590 queued 01:56:46 Received message from Master: op=PointingHead serial=205603 01:56:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 01:56:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 01:56:46 Point started: ret=0 01:56:46 point_skyscan result=0 01:56:47 Check angles 01:56:47 SkyScan query 01:56:47 SkyScan query done: ret=0 az=152.595<-10173 ze=8.1<-11460 Statuses=0009 0009 01:56:47 Msec=0 True Az=152.595 Ze=8.1 Az status=0009 Ze status=0009 01:56:47 Check angles 01:56:47 SkyScan query 01:56:48 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.765<-12851 Statuses=0009 0009 01:56:48 Msec=750 True Az=135.105 Ze=-12.765 Az status=0009 Ze status=0009 01:56:48 Check angles 01:56:48 SkyScan query 01:56:49 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.765<-14251 Statuses=0009 0009 01:56:49 Msec=1500 True Az=117.585 Ze=-33.765 Az status=0009 Ze status=0009 01:56:49 Check angles 01:56:49 SkyScan query 01:56:50 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.57<-15438 Statuses=0009 0009 01:56:50 Msec=2250 True Az=100.2 Ze=-51.57 Az status=0009 Ze status=0009 01:56:50 Check angles 01:56:50 SkyScan query 01:56:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 01:56:50 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 01:56:50 Check angles 01:56:50 SkyScan query 01:56:51 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 01:56:51 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 01:56:51 Message to Master queued w/err=0: serial=205603 error=0 01:56:56 Received message from Master: op=Filter serial=205604 01:56:56 Color wheel filter change from 0 to 0 01:56:56 FLIGetFilterPos err=0 currentPosition=0 01:56:56 FLIGetStepsRemaining err=0 RemainingSteps=0 01:56:56 Filter is already there-color wheel unchanged 01:56:56 Received message from Master: op=Shutter serial=205605 01:56:56 Shutter LASER close 01:56:56 Received message from Camera: op=State serial=205607 01:56:56 GetSingleValue result=40 Value=cccccccc 01:56:56 SkyScan query 01:56:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 01:56:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:57 Parameters OK 01:56:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:57 Set A/D data flow result=40 01:56:57 Set A/D channel type result=40 01:56:57 Set A/D encoding result=40 01:56:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:57 Set channel filter=0.000000e+000 result=40 01:56:57 Config A/D Result=40 01:56:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:57 Get A/D filter: -9.255963e+061 result=40 01:56:57 Get A/D value=-858993460 result=40 01:56:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:56:57 Parameters OK 01:56:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:56:57 Set A/D data flow result=40 01:56:57 Set A/D channel type result=40 01:56:57 Set A/D encoding result=40 01:56:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:56:57 Set channel filter=0.000000e+000 result=40 01:56:57 Config A/D Result=40 01:56:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:56:57 Get A/D filter: -9.255963e+061 result=40 01:56:57 Get A/D value=-858993460 result=40 01:56:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:56:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:56:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:56:57 Aux= 01:56:57 Message to Camera, serial 205607 queued 01:57:34 Received message from Master: op=PointingHead serial=205620 01:57:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 01:57:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 01:57:34 Point started: ret=0 01:57:34 point_skyscan result=0 01:57:35 Check angles 01:57:35 SkyScan query 01:57:35 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.195<-17413 Statuses=0009 0009 01:57:35 Msec=0 True Az=108.975 Ze=-81.195 Az status=0009 Ze status=0009 01:57:35 Check angles 01:57:35 SkyScan query 01:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 01:57:36 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 01:57:36 Check angles 01:57:36 SkyScan query 01:57:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.57<-20238 Statuses=0008 0009 01:57:37 Msec=1500 True Az=112.995 Ze=-123.57 Az status=0008 Ze status=0009 01:57:37 Check angles 01:57:37 SkyScan query 01:57:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.48<-21632 Statuses=0008 0009 01:57:38 Msec=2250 True Az=112.995 Ze=-144.48 Az status=0008 Ze status=0009 01:57:38 Check angles 01:57:38 SkyScan query 01:57:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 01:57:38 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 01:57:39 Check angles 01:57:39 SkyScan query 01:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 01:57:39 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 01:57:39 Message to Master queued w/err=0: serial=205620 error=0 01:57:44 Received message from Master: op=Filter serial=205621 01:57:44 Color wheel filter change from 0 to 0 01:57:44 FLIGetFilterPos err=0 currentPosition=0 01:57:44 FLIGetStepsRemaining err=0 RemainingSteps=0 01:57:44 Filter is already there-color wheel unchanged 01:57:44 Received message from Master: op=Shutter serial=205622 01:57:44 Shutter LASER open 01:57:44 Received message from Camera: op=State serial=205624 01:57:44 GetSingleValue result=40 Value=cccccccc 01:57:44 SkyScan query 01:57:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 01:57:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:45 Parameters OK 01:57:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:45 Set A/D data flow result=40 01:57:45 Set A/D channel type result=40 01:57:45 Set A/D encoding result=40 01:57:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:45 Set channel filter=0.000000e+000 result=40 01:57:45 Config A/D Result=40 01:57:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:45 Get A/D filter: -9.255963e+061 result=40 01:57:45 Get A/D value=-858993460 result=40 01:57:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:57:45 Parameters OK 01:57:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:57:45 Set A/D data flow result=40 01:57:45 Set A/D channel type result=40 01:57:45 Set A/D encoding result=40 01:57:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:57:45 Set channel filter=0.000000e+000 result=40 01:57:45 Config A/D Result=40 01:57:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:57:45 Get A/D filter: -9.255963e+061 result=40 01:57:45 Get A/D value=-858993460 result=40 01:57:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:57:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:57:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:57:45 Aux= 01:57:45 Message to Camera, serial 205624 queued 01:57:53 Received message from Master: op=Shutter serial=205634 01:57:53 Shutter LASER close 01:57:54 Received message from Master: op=PointingHead serial=205638 01:57:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 01:57:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 01:57:54 Point started: ret=0 01:57:54 point_skyscan result=0 01:57:55 Check angles 01:57:55 SkyScan query 01:57:56 SkyScan query done: ret=0 az=90<-6000 ze=157.32<-1512 Statuses=0009 0009 01:57:56 Msec=0 True Az=90 Ze=157.32 Az status=0009 Ze status=0009 01:57:56 Check angles 01:57:56 SkyScan query 01:57:56 SkyScan query done: ret=0 az=72.495<-4833 ze=136.32<-2912 Statuses=0009 0009 01:57:56 Msec=750 True Az=72.495 Ze=136.32 Az status=0009 Ze status=0009 01:57:56 Check angles 01:57:56 SkyScan query 01:57:57 SkyScan query done: ret=0 az=55.215<-3681 ze=115.44<-4304 Statuses=0009 0009 01:57:57 Msec=1500 True Az=55.215 Ze=115.44 Az status=0009 Ze status=0009 01:57:57 Check angles 01:57:57 SkyScan query 01:57:58 SkyScan query done: ret=0 az=40.995<-2733 ze=94.41<-5706 Statuses=0009 0009 01:57:58 Msec=2250 True Az=40.995 Ze=94.41 Az status=0009 Ze status=0009 01:57:58 Check angles 01:57:58 SkyScan query 01:57:59 SkyScan query done: ret=0 az=40.98<-2732 ze=72.99<-7134 Statuses=0008 0009 01:57:59 Msec=3000 True Az=40.98 Ze=72.99 Az status=0008 Ze status=0009 01:57:59 Check angles 01:57:59 SkyScan query 01:57:59 SkyScan query done: ret=0 az=40.98<-2732 ze=52.605<-8493 Statuses=0008 0009 01:57:59 Msec=3750 True Az=40.98 Ze=52.605 Az status=0008 Ze status=0009 01:57:59 Check angles 01:57:59 SkyScan query 01:58:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 01:58:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 01:58:00 Message to Master queued w/err=0: serial=205638 error=0 01:58:05 Received message from Master: op=Filter serial=205639 01:58:05 Color wheel filter change from 0 to 0 01:58:05 FLIGetFilterPos err=0 currentPosition=0 01:58:05 FLIGetStepsRemaining err=0 RemainingSteps=0 01:58:05 Filter is already there-color wheel unchanged 01:58:05 Received message from Master: op=Shutter serial=205640 01:58:05 Shutter LASER close 01:58:06 Received message from Camera: op=State serial=205642 01:58:06 GetSingleValue result=40 Value=cccccccc 01:58:06 SkyScan query 01:58:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 01:58:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:06 Parameters OK 01:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:06 Set A/D data flow result=40 01:58:06 Set A/D channel type result=40 01:58:06 Set A/D encoding result=40 01:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:06 Set channel filter=0.000000e+000 result=40 01:58:06 Config A/D Result=40 01:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:06 Get A/D filter: -9.255963e+061 result=40 01:58:06 Get A/D value=-858993460 result=40 01:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:06 Parameters OK 01:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:06 Set A/D data flow result=40 01:58:06 Set A/D channel type result=40 01:58:06 Set A/D encoding result=40 01:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:06 Set channel filter=0.000000e+000 result=40 01:58:06 Config A/D Result=40 01:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:06 Get A/D filter: -9.255963e+061 result=40 01:58:06 Get A/D value=-858993460 result=40 01:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:58:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:58:06 Aux= 01:58:06 Message to Camera, serial 205642 queued 01:58:43 Received message from Master: op=PointingHead serial=205655 01:58:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 01:58:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 01:58:43 Point started: ret=0 01:58:43 point_skyscan result=0 01:58:44 Check angles 01:58:44 SkyScan query 01:58:45 SkyScan query done: ret=0 az=40.995<-2733 ze=21.195<-10587 Statuses=0008 0009 01:58:45 Msec=0 True Az=40.995 Ze=21.195 Az status=0008 Ze status=0009 01:58:45 Check angles 01:58:45 SkyScan query 01:58:45 SkyScan query done: ret=0 az=41.01<-2734 ze=0.21<-11986 Statuses=0008 0009 01:58:45 Msec=750 True Az=41.01 Ze=0.21 Az status=0008 Ze status=0009 01:58:46 Check angles 01:58:46 SkyScan query 01:58:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.745<-13383 Statuses=0008 0009 01:58:46 Msec=1500 True Az=40.995 Ze=-20.745 Az status=0008 Ze status=0009 01:58:46 Check angles 01:58:46 SkyScan query 01:58:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 01:58:47 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 01:58:47 Check angles 01:58:47 SkyScan query 01:58:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 01:58:48 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 01:58:48 Message to Master queued w/err=0: serial=205655 error=0 01:58:53 Received message from Master: op=Filter serial=205656 01:58:53 Color wheel filter change from 0 to 0 01:58:53 FLIGetFilterPos err=0 currentPosition=0 01:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 01:58:53 Filter is already there-color wheel unchanged 01:58:53 Received message from Master: op=Shutter serial=205657 01:58:53 Shutter LASER close 01:58:53 Received message from Camera: op=State serial=205659 01:58:53 GetSingleValue result=40 Value=cccccccc 01:58:53 SkyScan query 01:58:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 01:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:54 Parameters OK 01:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:54 Set A/D data flow result=40 01:58:54 Set A/D channel type result=40 01:58:54 Set A/D encoding result=40 01:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:54 Set channel filter=0.000000e+000 result=40 01:58:54 Config A/D Result=40 01:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:54 Get A/D filter: -9.255963e+061 result=40 01:58:54 Get A/D value=-858993460 result=40 01:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:58:54 Parameters OK 01:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:58:54 Set A/D data flow result=40 01:58:54 Set A/D channel type result=40 01:58:54 Set A/D encoding result=40 01:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:58:54 Set channel filter=0.000000e+000 result=40 01:58:54 Config A/D Result=40 01:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:58:54 Get A/D filter: -9.255963e+061 result=40 01:58:54 Get A/D value=-858993460 result=40 01:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:58:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:58:54 Aux= 01:58:54 Message to Camera, serial 205659 queued 01:59:30 Received message from Master: op=PointingHead serial=205672 01:59:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 01:59:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 01:59:31 Point started: ret=0 01:59:31 point_skyscan result=0 01:59:31 Check angles 01:59:31 SkyScan query 01:59:32 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.475<-16565 Statuses=0009 0009 01:59:32 Msec=0 True Az=64.245 Ze=-68.475 Az status=0009 Ze status=0009 01:59:32 Check angles 01:59:32 SkyScan query 01:59:33 SkyScan query done: ret=0 az=81.675<-5445 ze=-89.505<-17967 Statuses=0009 0009 01:59:33 Msec=750 True Az=81.675 Ze=-89.505 Az status=0009 Ze status=0009 01:59:33 Check angles 01:59:33 SkyScan query 01:59:34 SkyScan query done: ret=0 az=99.24<-6616 ze=-110.43<-19362 Statuses=0009 0009 01:59:34 Msec=1500 True Az=99.24 Ze=-110.43 Az status=0009 Ze status=0009 01:59:34 Check angles 01:59:34 SkyScan query 01:59:34 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.355<-20757 Statuses=0009 0009 01:59:34 Msec=2250 True Az=116.52 Ze=-131.355 Az status=0009 Ze status=0009 01:59:34 Check angles 01:59:34 SkyScan query 01:59:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 01:59:35 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 01:59:35 Check angles 01:59:35 SkyScan query 01:59:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 01:59:36 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 01:59:36 Message to Master queued w/err=0: serial=205672 error=0 01:59:41 Received message from Master: op=Filter serial=205673 01:59:41 Color wheel filter change from 0 to 0 01:59:41 FLIGetFilterPos err=0 currentPosition=0 01:59:41 FLIGetStepsRemaining err=0 RemainingSteps=0 01:59:41 Filter is already there-color wheel unchanged 01:59:41 Received message from Master: op=Shutter serial=205674 01:59:41 Shutter LASER close 01:59:41 Received message from Camera: op=State serial=205676 01:59:41 GetSingleValue result=40 Value=cccccccc 01:59:41 SkyScan query 01:59:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 01:59:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:42 Parameters OK 01:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:42 Set A/D data flow result=40 01:59:42 Set A/D channel type result=40 01:59:42 Set A/D encoding result=40 01:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:42 Set channel filter=0.000000e+000 result=40 01:59:42 Config A/D Result=40 01:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:42 Get A/D filter: -9.255963e+061 result=40 01:59:42 Get A/D value=-858993460 result=40 01:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 01:59:42 Parameters OK 01:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 01:59:42 Set A/D data flow result=40 01:59:42 Set A/D channel type result=40 01:59:42 Set A/D encoding result=40 01:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 01:59:42 Set channel filter=0.000000e+000 result=40 01:59:42 Config A/D Result=40 01:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 01:59:42 Get A/D filter: -9.255963e+061 result=40 01:59:42 Get A/D value=-858993460 result=40 01:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 01:59:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 01:59:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 01:59:42 Aux= 01:59:42 Message to Camera, serial 205676 queued 02:00:18 Received message from Master: op=PointingHead serial=205689 02:00:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:00:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:00:19 Point started: ret=0 02:00:19 point_skyscan result=0 02:00:20 Check angles 02:00:20 SkyScan query 02:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.285<-23419 Statuses=0009 0009 02:00:20 Msec=0 True Az=112.995 Ze=-171.285 Az status=0009 Ze status=0009 02:00:20 Check angles 02:00:20 SkyScan query 02:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:00:21 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:00:21 Message to Master queued w/err=0: serial=205689 error=0 02:00:26 Received message from Master: op=Filter serial=205690 02:00:26 Color wheel filter change from 0 to 0 02:00:26 FLIGetFilterPos err=0 currentPosition=0 02:00:26 FLIGetStepsRemaining err=0 RemainingSteps=0 02:00:26 Filter is already there-color wheel unchanged 02:00:26 Received message from Master: op=Shutter serial=205691 02:00:26 Shutter LASER open 02:00:26 Received message from Camera: op=State serial=205693 02:00:26 GetSingleValue result=40 Value=cccccccc 02:00:26 SkyScan query 02:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:00:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:27 Parameters OK 02:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:27 Set A/D data flow result=40 02:00:27 Set A/D channel type result=40 02:00:27 Set A/D encoding result=40 02:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:27 Set channel filter=0.000000e+000 result=40 02:00:27 Config A/D Result=40 02:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:27 Get A/D filter: -9.255963e+061 result=40 02:00:27 Get A/D value=-858993460 result=40 02:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:27 Parameters OK 02:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:27 Set A/D data flow result=40 02:00:27 Set A/D channel type result=40 02:00:27 Set A/D encoding result=40 02:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:27 Set channel filter=0.000000e+000 result=40 02:00:27 Config A/D Result=40 02:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:27 Get A/D filter: -9.255963e+061 result=40 02:00:27 Get A/D value=-858993460 result=40 02:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:00:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:00:27 Aux= 02:00:27 Message to Camera, serial 205693 queued 02:00:35 Received message from Master: op=Shutter serial=205703 02:00:35 Shutter LASER close 02:00:36 Received message from Master: op=PointingHead serial=205707 02:00:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:00:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:00:36 Point started: ret=0 02:00:36 point_skyscan result=0 02:00:37 Check angles 02:00:37 SkyScan query 02:00:37 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.725<-21515 Statuses=0009 0009 02:00:37 Msec=0 True Az=136.395 Ze=-142.725 Az status=0009 Ze status=0009 02:00:38 Check angles 02:00:38 SkyScan query 02:00:38 SkyScan query done: ret=0 az=153.945<-10263 ze=-121.755<-20117 Statuses=0009 0009 02:00:38 Msec=750 True Az=153.945 Ze=-121.755 Az status=0009 Ze status=0009 02:00:38 Check angles 02:00:38 SkyScan query 02:00:39 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.71<-18714 Statuses=0009 0009 02:00:39 Msec=1500 True Az=171.405 Ze=-100.71 Az status=0009 Ze status=0009 02:00:39 Check angles 02:00:39 SkyScan query 02:00:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 02:00:40 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 02:00:40 Check angles 02:00:40 SkyScan query 02:00:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.86<-15924 Statuses=0008 0009 02:00:40 Msec=3000 True Az=175.995 Ze=-58.86 Az status=0008 Ze status=0009 02:00:41 Check angles 02:00:41 SkyScan query 02:00:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:00:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:00:41 Message to Master queued w/err=0: serial=205707 error=0 02:00:46 Received message from Master: op=Filter serial=205708 02:00:46 Color wheel filter change from 0 to 0 02:00:46 FLIGetFilterPos err=0 currentPosition=0 02:00:46 FLIGetStepsRemaining err=0 RemainingSteps=0 02:00:46 Filter is already there-color wheel unchanged 02:00:46 Received message from Master: op=Shutter serial=205709 02:00:46 Shutter LASER close 02:00:47 Received message from Camera: op=State serial=205711 02:00:47 GetSingleValue result=40 Value=cccccccc 02:00:47 SkyScan query 02:00:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:00:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:47 Parameters OK 02:00:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:47 Set A/D data flow result=40 02:00:47 Set A/D channel type result=40 02:00:47 Set A/D encoding result=40 02:00:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:47 Set channel filter=0.000000e+000 result=40 02:00:47 Config A/D Result=40 02:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:47 Get A/D filter: -9.255963e+061 result=40 02:00:47 Get A/D value=-858993460 result=40 02:00:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:00:47 Parameters OK 02:00:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:00:47 Set A/D data flow result=40 02:00:47 Set A/D channel type result=40 02:00:47 Set A/D encoding result=40 02:00:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:00:47 Set channel filter=0.000000e+000 result=40 02:00:47 Config A/D Result=40 02:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:00:47 Get A/D filter: -9.255963e+061 result=40 02:00:47 Get A/D value=-858993460 result=40 02:00:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:00:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:00:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:00:47 Aux= 02:00:47 Message to Camera, serial 205711 queued 02:01:24 Received message from Master: op=PointingHead serial=205724 02:01:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:01:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:01:24 Point started: ret=0 02:01:24 point_skyscan result=0 02:01:25 Check angles 02:01:25 SkyScan query 02:01:26 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.84<-13456 Statuses=0009 0009 02:01:26 Msec=0 True Az=152.955 Ze=-21.84 Az status=0009 Ze status=0009 02:01:26 Check angles 02:01:26 SkyScan query 02:01:26 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.855<-12057 Statuses=0009 0009 02:01:26 Msec=750 True Az=135.615 Ze=-0.855 Az status=0009 Ze status=0009 02:01:27 Check angles 02:01:27 SkyScan query 02:01:27 SkyScan query done: ret=0 az=117.705<-7847 ze=20.535<-10631 Statuses=0009 0009 02:01:27 Msec=1500 True Az=117.705 Ze=20.535 Az status=0009 Ze status=0009 02:01:27 Check angles 02:01:27 SkyScan query 02:01:28 SkyScan query done: ret=0 az=99.96<-6664 ze=41.955<-9203 Statuses=0009 0009 02:01:28 Msec=2250 True Az=99.96 Ze=41.955 Az status=0009 Ze status=0009 02:01:28 Check angles 02:01:28 SkyScan query 02:01:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 02:01:29 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 02:01:29 Check angles 02:01:29 SkyScan query 02:01:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:01:29 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:01:29 Message to Master queued w/err=0: serial=205724 error=0 02:01:34 Received message from Master: op=Filter serial=205725 02:01:34 Color wheel filter change from 0 to 0 02:01:34 FLIGetFilterPos err=0 currentPosition=0 02:01:34 FLIGetStepsRemaining err=0 RemainingSteps=0 02:01:34 Filter is already there-color wheel unchanged 02:01:35 Received message from Master: op=Shutter serial=205726 02:01:35 Shutter LASER close 02:01:35 Received message from Camera: op=State serial=205728 02:01:35 GetSingleValue result=40 Value=cccccccc 02:01:35 SkyScan query 02:01:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:01:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:35 Parameters OK 02:01:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:35 Set A/D data flow result=40 02:01:35 Set A/D channel type result=40 02:01:35 Set A/D encoding result=40 02:01:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:35 Set channel filter=0.000000e+000 result=40 02:01:35 Config A/D Result=40 02:01:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:35 Get A/D filter: -9.255963e+061 result=40 02:01:35 Get A/D value=-858993460 result=40 02:01:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:01:35 Parameters OK 02:01:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:01:35 Set A/D data flow result=40 02:01:35 Set A/D channel type result=40 02:01:35 Set A/D encoding result=40 02:01:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:01:35 Set channel filter=0.000000e+000 result=40 02:01:35 Config A/D Result=40 02:01:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:01:35 Get A/D filter: -9.255963e+061 result=40 02:01:35 Get A/D value=-858993460 result=40 02:01:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:01:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:01:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:01:35 Aux= 02:01:35 Message to Camera, serial 205728 queued 02:02:12 Received message from Master: op=PointingHead serial=205741 02:02:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:02:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:02:12 Point started: ret=0 02:02:12 point_skyscan result=0 02:02:13 Check angles 02:02:13 SkyScan query 02:02:14 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 02:02:14 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 02:02:14 Check angles 02:02:14 SkyScan query 02:02:15 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 02:02:15 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 02:02:15 Check angles 02:02:15 SkyScan query 02:02:15 SkyScan query done: ret=0 az=144.09<-9606 ze=38.505<-9433 Statuses=0009 0008 02:02:15 Msec=1500 True Az=144.09 Ze=38.505 Az status=0009 Ze status=0008 02:02:15 Check angles 02:02:15 SkyScan query 02:02:16 SkyScan query done: ret=0 az=161.805<-10787 ze=38.505<-9433 Statuses=0009 0008 02:02:16 Msec=2250 True Az=161.805 Ze=38.505 Az status=0009 Ze status=0008 02:02:16 Check angles 02:02:16 SkyScan query 02:02:17 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 02:02:17 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 02:02:17 Check angles 02:02:17 SkyScan query 02:02:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:02:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:02:18 Message to Master queued w/err=0: serial=205741 error=0 02:02:23 Received message from Master: op=Filter serial=205742 02:02:23 Color wheel filter change from 0 to 0 02:02:23 FLIGetFilterPos err=0 currentPosition=0 02:02:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:02:23 Filter is already there-color wheel unchanged 02:02:23 Received message from Master: op=Shutter serial=205743 02:02:23 Shutter LASER close 02:02:23 Received message from Camera: op=State serial=205745 02:02:23 GetSingleValue result=40 Value=cccccccc 02:02:23 SkyScan query 02:02:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:02:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:23 Parameters OK 02:02:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:23 Set A/D data flow result=40 02:02:23 Set A/D channel type result=40 02:02:23 Set A/D encoding result=40 02:02:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:23 Set channel filter=0.000000e+000 result=40 02:02:23 Config A/D Result=40 02:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:23 Get A/D filter: -9.255963e+061 result=40 02:02:23 Get A/D value=-858993460 result=40 02:02:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:02:23 Parameters OK 02:02:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:02:23 Set A/D data flow result=40 02:02:23 Set A/D channel type result=40 02:02:23 Set A/D encoding result=40 02:02:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:02:23 Set channel filter=0.000000e+000 result=40 02:02:23 Config A/D Result=40 02:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:02:23 Get A/D filter: -9.255963e+061 result=40 02:02:23 Get A/D value=-858993460 result=40 02:02:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:02:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:02:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:02:23 Aux= 02:02:23 Message to Camera, serial 205745 queued 02:02:59 Received message from Master: op=PointingHead serial=205757 02:02:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:02:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:03:00 Point started: ret=0 02:03:00 point_skyscan result=0 02:03:00 Check angles 02:03:00 SkyScan query 02:03:01 SkyScan query done: ret=0 az=152.67<-10178 ze=8.235<-11451 Statuses=0009 0009 02:03:01 Msec=0 True Az=152.67 Ze=8.235 Az status=0009 Ze status=0009 02:03:01 Check angles 02:03:01 SkyScan query 02:03:02 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.645<-12843 Statuses=0009 0009 02:03:02 Msec=750 True Az=135.21 Ze=-12.645 Az status=0009 Ze status=0009 02:03:02 Check angles 02:03:02 SkyScan query 02:03:02 SkyScan query done: ret=0 az=117.33<-7822 ze=-34.14<-14276 Statuses=0009 0009 02:03:02 Msec=1500 True Az=117.33 Ze=-34.14 Az status=0009 Ze status=0009 02:03:03 Check angles 02:03:03 SkyScan query 02:03:03 SkyScan query done: ret=0 az=99.99<-6666 ze=-51.585<-15439 Statuses=0009 0009 02:03:03 Msec=2250 True Az=99.99 Ze=-51.585 Az status=0009 Ze status=0009 02:03:03 Check angles 02:03:03 SkyScan query 02:03:04 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 02:03:04 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 02:03:04 Check angles 02:03:04 SkyScan query 02:03:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:03:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:03:05 Message to Master queued w/err=0: serial=205757 error=0 02:03:10 Received message from Master: op=Filter serial=205758 02:03:10 Color wheel filter change from 0 to 0 02:03:10 FLIGetFilterPos err=0 currentPosition=0 02:03:10 FLIGetStepsRemaining err=0 RemainingSteps=0 02:03:10 Filter is already there-color wheel unchanged 02:03:10 Received message from Master: op=Shutter serial=205759 02:03:10 Shutter LASER close 02:03:10 Received message from Camera: op=State serial=205761 02:03:10 GetSingleValue result=40 Value=cccccccc 02:03:10 SkyScan query 02:03:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:03:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:11 Parameters OK 02:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:11 Set A/D data flow result=40 02:03:11 Set A/D channel type result=40 02:03:11 Set A/D encoding result=40 02:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:11 Set channel filter=0.000000e+000 result=40 02:03:11 Config A/D Result=40 02:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:11 Get A/D filter: -9.255963e+061 result=40 02:03:11 Get A/D value=-858993460 result=40 02:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:11 Parameters OK 02:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:11 Set A/D data flow result=40 02:03:11 Set A/D channel type result=40 02:03:11 Set A/D encoding result=40 02:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:11 Set channel filter=0.000000e+000 result=40 02:03:11 Config A/D Result=40 02:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:11 Get A/D filter: -9.255963e+061 result=40 02:03:11 Get A/D value=-858993460 result=40 02:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:03:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:03:11 Aux= 02:03:11 Message to Camera, serial 205761 queued 02:03:47 Received message from Master: op=PointingHead serial=205774 02:03:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:03:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:03:48 Point started: ret=0 02:03:48 point_skyscan result=0 02:03:48 Check angles 02:03:48 SkyScan query 02:03:49 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.495<-17433 Statuses=0009 0009 02:03:49 Msec=0 True Az=109.14 Ze=-81.495 Az status=0009 Ze status=0009 02:03:49 Check angles 02:03:49 SkyScan query 02:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.885<-18859 Statuses=0008 0009 02:03:50 Msec=750 True Az=112.995 Ze=-102.885 Az status=0008 Ze status=0009 02:03:50 Check angles 02:03:50 SkyScan query 02:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 02:03:51 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 02:03:51 Check angles 02:03:51 SkyScan query 02:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 02:03:51 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 02:03:51 Check angles 02:03:51 SkyScan query 02:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 02:03:52 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 02:03:52 Check angles 02:03:52 SkyScan query 02:03:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:03:53 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:03:53 Message to Master queued w/err=0: serial=205774 error=0 02:03:58 Received message from Master: op=Filter serial=205775 02:03:58 Color wheel filter change from 0 to 0 02:03:58 FLIGetFilterPos err=0 currentPosition=0 02:03:58 FLIGetStepsRemaining err=0 RemainingSteps=0 02:03:58 Filter is already there-color wheel unchanged 02:03:58 Received message from Master: op=Shutter serial=205776 02:03:58 Shutter LASER open 02:03:58 Received message from Camera: op=State serial=205778 02:03:58 GetSingleValue result=40 Value=cccccccc 02:03:58 SkyScan query 02:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:03:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:59 Parameters OK 02:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:59 Set A/D data flow result=40 02:03:59 Set A/D channel type result=40 02:03:59 Set A/D encoding result=40 02:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:59 Set channel filter=0.000000e+000 result=40 02:03:59 Config A/D Result=40 02:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:59 Get A/D filter: -9.255963e+061 result=40 02:03:59 Get A/D value=-858993460 result=40 02:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:03:59 Parameters OK 02:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:03:59 Set A/D data flow result=40 02:03:59 Set A/D channel type result=40 02:03:59 Set A/D encoding result=40 02:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:03:59 Set channel filter=0.000000e+000 result=40 02:03:59 Config A/D Result=40 02:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:03:59 Get A/D filter: -9.255963e+061 result=40 02:03:59 Get A/D value=-858993460 result=40 02:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:03:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:03:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:03:59 Aux= 02:03:59 Message to Camera, serial 205778 queued 02:04:07 Received message from Master: op=Shutter serial=205788 02:04:07 Shutter LASER close 02:04:08 Received message from Master: op=PointingHead serial=205792 02:04:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:04:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:04:08 Point started: ret=0 02:04:08 point_skyscan result=0 02:04:09 Check angles 02:04:09 SkyScan query 02:04:09 SkyScan query done: ret=0 az=90.135<-6009 ze=157.5<-1500 Statuses=0009 0009 02:04:09 Msec=0 True Az=90.135 Ze=157.5 Az status=0009 Ze status=0009 02:04:09 Check angles 02:04:09 SkyScan query 02:04:10 SkyScan query done: ret=0 az=72.645<-4843 ze=136.515<-2899 Statuses=0009 0009 02:04:10 Msec=750 True Az=72.645 Ze=136.515 Az status=0009 Ze status=0009 02:04:10 Check angles 02:04:10 SkyScan query 02:04:11 SkyScan query done: ret=0 az=54.915<-3661 ze=115.185<-4321 Statuses=0009 0009 02:04:11 Msec=1500 True Az=54.915 Ze=115.185 Az status=0009 Ze status=0009 02:04:11 Check angles 02:04:11 SkyScan query 02:04:12 SkyScan query done: ret=0 az=40.995<-2733 ze=94.2<-5720 Statuses=0009 0009 02:04:12 Msec=2250 True Az=40.995 Ze=94.2 Az status=0009 Ze status=0009 02:04:12 Check angles 02:04:12 SkyScan query 02:04:12 SkyScan query done: ret=0 az=40.98<-2732 ze=73.215<-7119 Statuses=0008 0009 02:04:12 Msec=3000 True Az=40.98 Ze=73.215 Az status=0008 Ze status=0009 02:04:12 Check angles 02:04:12 SkyScan query 02:04:13 SkyScan query done: ret=0 az=40.98<-2732 ze=52.725<-8485 Statuses=0008 0009 02:04:13 Msec=3750 True Az=40.98 Ze=52.725 Az status=0008 Ze status=0009 02:04:13 Check angles 02:04:13 SkyScan query 02:04:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:04:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:04:14 Message to Master queued w/err=0: serial=205792 error=0 02:04:19 Received message from Master: op=Filter serial=205793 02:04:19 Color wheel filter change from 0 to 0 02:04:19 FLIGetFilterPos err=0 currentPosition=0 02:04:19 FLIGetStepsRemaining err=0 RemainingSteps=0 02:04:19 Filter is already there-color wheel unchanged 02:04:19 Received message from Master: op=Shutter serial=205794 02:04:19 Shutter LASER close 02:04:19 Received message from Camera: op=State serial=205796 02:04:19 GetSingleValue result=40 Value=cccccccc 02:04:19 SkyScan query 02:04:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:04:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:20 Parameters OK 02:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:20 Set A/D data flow result=40 02:04:20 Set A/D channel type result=40 02:04:20 Set A/D encoding result=40 02:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:20 Set channel filter=0.000000e+000 result=40 02:04:20 Config A/D Result=40 02:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:20 Get A/D filter: -9.255963e+061 result=40 02:04:20 Get A/D value=-858993460 result=40 02:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:04:20 Parameters OK 02:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:04:20 Set A/D data flow result=40 02:04:20 Set A/D channel type result=40 02:04:20 Set A/D encoding result=40 02:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:04:20 Set channel filter=0.000000e+000 result=40 02:04:20 Config A/D Result=40 02:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:04:20 Get A/D filter: -9.255963e+061 result=40 02:04:20 Get A/D value=-858993460 result=40 02:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:04:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:04:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:04:20 Aux= 02:04:20 Message to Camera, serial 205796 queued 02:04:57 Received message from Master: op=PointingHead serial=205809 02:04:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:04:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:04:57 Point started: ret=0 02:04:57 point_skyscan result=0 02:04:58 Check angles 02:04:58 SkyScan query 02:04:58 SkyScan query done: ret=0 az=40.995<-2733 ze=21.45<-10570 Statuses=0008 0009 02:04:58 Msec=0 True Az=40.995 Ze=21.45 Az status=0008 Ze status=0009 02:04:59 Check angles 02:04:59 SkyScan query 02:04:59 SkyScan query done: ret=0 az=41.01<-2734 ze=-0<-12000 Statuses=0008 0009 02:04:59 Msec=750 True Az=41.01 Ze=-0 Az status=0008 Ze status=0009 02:04:59 Check angles 02:04:59 SkyScan query 02:05:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.955<-13397 Statuses=0008 0009 02:05:00 Msec=1500 True Az=40.995 Ze=-20.955 Az status=0008 Ze status=0009 02:05:00 Check angles 02:05:00 SkyScan query 02:05:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 02:05:01 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 02:05:01 Check angles 02:05:01 SkyScan query 02:05:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:05:01 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:05:01 Message to Master queued w/err=0: serial=205809 error=0 02:05:06 Received message from Master: op=Filter serial=205810 02:05:06 Color wheel filter change from 0 to 0 02:05:06 FLIGetFilterPos err=0 currentPosition=0 02:05:06 FLIGetStepsRemaining err=0 RemainingSteps=0 02:05:06 Filter is already there-color wheel unchanged 02:05:07 Received message from Master: op=Shutter serial=205811 02:05:07 Shutter LASER close 02:05:07 Received message from Camera: op=State serial=205813 02:05:07 GetSingleValue result=40 Value=cccccccc 02:05:07 SkyScan query 02:05:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:05:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:07 Parameters OK 02:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:07 Set A/D data flow result=40 02:05:07 Set A/D channel type result=40 02:05:07 Set A/D encoding result=40 02:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:07 Set channel filter=0.000000e+000 result=40 02:05:07 Config A/D Result=40 02:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:07 Get A/D filter: -9.255963e+061 result=40 02:05:07 Get A/D value=-858993460 result=40 02:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:07 Parameters OK 02:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:07 Set A/D data flow result=40 02:05:07 Set A/D channel type result=40 02:05:07 Set A/D encoding result=40 02:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:07 Set channel filter=0.000000e+000 result=40 02:05:07 Config A/D Result=40 02:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:07 Get A/D filter: -9.255963e+061 result=40 02:05:07 Get A/D value=-858993460 result=40 02:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:05:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:05:07 Aux= 02:05:07 Message to Camera, serial 205813 queued 02:05:44 Received message from Master: op=PointingHead serial=205826 02:05:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:05:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:05:44 Point started: ret=0 02:05:44 point_skyscan result=0 02:05:45 Check angles 02:05:45 SkyScan query 02:05:46 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.745<-16583 Statuses=0009 0009 02:05:46 Msec=0 True Az=64.41 Ze=-68.745 Az status=0009 Ze status=0009 02:05:46 Check angles 02:05:46 SkyScan query 02:05:46 SkyScan query done: ret=0 az=81.93<-5462 ze=-89.7<-17980 Statuses=0009 0009 02:05:46 Msec=750 True Az=81.93 Ze=-89.7 Az status=0009 Ze status=0009 02:05:47 Check angles 02:05:47 SkyScan query [UTC 2018-12-17 02:05:47] 02:05:47 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.7<-19380 Statuses=0009 0009 02:05:47 Msec=1500 True Az=99.39 Ze=-110.7 Az status=0009 Ze status=0009 02:05:47 Check angles 02:05:47 SkyScan query 02:05:48 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.595<-20773 Statuses=0009 0009 02:05:48 Msec=2250 True Az=116.805 Ze=-131.595 Az status=0009 Ze status=0009 02:05:48 Check angles 02:05:48 SkyScan query 02:05:49 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 02:05:49 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 02:05:49 Check angles 02:05:49 SkyScan query 02:05:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:05:49 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:05:49 Message to Master queued w/err=0: serial=205826 error=0 02:05:54 Received message from Master: op=Filter serial=205827 02:05:54 Color wheel filter change from 0 to 0 02:05:54 FLIGetFilterPos err=0 currentPosition=0 02:05:54 FLIGetStepsRemaining err=0 RemainingSteps=0 02:05:54 Filter is already there-color wheel unchanged 02:05:55 Received message from Master: op=Shutter serial=205828 02:05:55 Shutter LASER close 02:05:55 Received message from Camera: op=State serial=205830 02:05:55 GetSingleValue result=40 Value=cccccccc 02:05:55 SkyScan query 02:05:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:05:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:55 Parameters OK 02:05:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:55 Set A/D data flow result=40 02:05:55 Set A/D channel type result=40 02:05:55 Set A/D encoding result=40 02:05:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:55 Set channel filter=0.000000e+000 result=40 02:05:55 Config A/D Result=40 02:05:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:55 Get A/D filter: -9.255963e+061 result=40 02:05:55 Get A/D value=-858993460 result=40 02:05:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:05:55 Parameters OK 02:05:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:05:55 Set A/D data flow result=40 02:05:55 Set A/D channel type result=40 02:05:55 Set A/D encoding result=40 02:05:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:05:55 Set channel filter=0.000000e+000 result=40 02:05:55 Config A/D Result=40 02:05:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:05:55 Get A/D filter: -9.255963e+061 result=40 02:05:55 Get A/D value=-858993460 result=40 02:05:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:05:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:05:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:05:55 Aux= 02:05:55 Message to Camera, serial 205830 queued 02:06:32 Received message from Master: op=PointingHead serial=205843 02:06:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:06:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:06:32 Point started: ret=0 02:06:32 point_skyscan result=0 02:06:33 Check angles 02:06:33 SkyScan query 02:06:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.88<-23392 Statuses=0009 0009 02:06:34 Msec=0 True Az=113.01 Ze=-170.88 Az status=0009 Ze status=0009 02:06:34 Check angles 02:06:34 SkyScan query 02:06:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:06:35 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:06:35 Message to Master queued w/err=0: serial=205843 error=0 02:06:40 Received message from Master: op=Filter serial=205844 02:06:40 Color wheel filter change from 0 to 0 02:06:40 FLIGetFilterPos err=0 currentPosition=0 02:06:40 FLIGetStepsRemaining err=0 RemainingSteps=0 02:06:40 Filter is already there-color wheel unchanged 02:06:40 Received message from Master: op=Shutter serial=205845 02:06:40 Shutter LASER open 02:06:40 Received message from Camera: op=State serial=205847 02:06:40 GetSingleValue result=40 Value=cccccccc 02:06:40 SkyScan query 02:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:06:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:40 Parameters OK 02:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:40 Set A/D data flow result=40 02:06:40 Set A/D channel type result=40 02:06:40 Set A/D encoding result=40 02:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:40 Set channel filter=0.000000e+000 result=40 02:06:40 Config A/D Result=40 02:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:40 Get A/D filter: -9.255963e+061 result=40 02:06:40 Get A/D value=-858993460 result=40 02:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:06:40 Parameters OK 02:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:06:40 Set A/D data flow result=40 02:06:40 Set A/D channel type result=40 02:06:40 Set A/D encoding result=40 02:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:06:40 Set channel filter=0.000000e+000 result=40 02:06:40 Config A/D Result=40 02:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:06:40 Get A/D filter: -9.255963e+061 result=40 02:06:40 Get A/D value=-858993460 result=40 02:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:06:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:06:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:06:40 Aux= 02:06:40 Message to Camera, serial 205847 queued 02:06:49 Received message from Master: op=Shutter serial=205857 02:06:49 Shutter LASER close 02:06:50 Received message from Master: op=PointingHead serial=205861 02:06:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:06:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:06:50 Point started: ret=0 02:06:50 point_skyscan result=0 02:06:51 Check angles 02:06:51 SkyScan query 02:06:51 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.19<-21546 Statuses=0009 0009 02:06:51 Msec=0 True Az=136.005 Ze=-143.19 Az status=0009 Ze status=0009 02:06:51 Check angles 02:06:51 SkyScan query 02:06:52 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.16<-20144 Statuses=0009 0009 02:06:52 Msec=750 True Az=153.51 Ze=-122.16 Az status=0009 Ze status=0009 02:06:52 Check angles 02:06:52 SkyScan query 02:06:53 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.695<-18713 Statuses=0009 0009 02:06:53 Msec=1500 True Az=171.465 Ze=-100.695 Az status=0009 Ze status=0009 02:06:53 Check angles 02:06:53 SkyScan query 02:06:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.35<-17290 Statuses=0008 0009 02:06:53 Msec=2250 True Az=175.995 Ze=-79.35 Az status=0008 Ze status=0009 02:06:54 Check angles 02:06:54 SkyScan query 02:06:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.41<-15894 Statuses=0008 0009 02:06:54 Msec=3000 True Az=176.01 Ze=-58.41 Az status=0008 Ze status=0009 02:06:54 Check angles 02:06:54 SkyScan query 02:06:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:06:55 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:06:55 Message to Master queued w/err=0: serial=205861 error=0 02:07:00 Received message from Master: op=Filter serial=205862 02:07:00 Color wheel filter change from 0 to 0 02:07:00 FLIGetFilterPos err=0 currentPosition=0 02:07:00 FLIGetStepsRemaining err=0 RemainingSteps=0 02:07:00 Filter is already there-color wheel unchanged 02:07:00 Received message from Master: op=Shutter serial=205863 02:07:00 Shutter LASER close 02:07:00 Received message from Camera: op=State serial=205865 02:07:00 GetSingleValue result=40 Value=cccccccc 02:07:00 SkyScan query 02:07:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:07:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:01 Parameters OK 02:07:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:01 Set A/D data flow result=40 02:07:01 Set A/D channel type result=40 02:07:01 Set A/D encoding result=40 02:07:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:01 Set channel filter=0.000000e+000 result=40 02:07:01 Config A/D Result=40 02:07:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:01 Get A/D filter: -9.255963e+061 result=40 02:07:01 Get A/D value=-858993460 result=40 02:07:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:01 Parameters OK 02:07:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:01 Set A/D data flow result=40 02:07:01 Set A/D channel type result=40 02:07:01 Set A/D encoding result=40 02:07:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:01 Set channel filter=0.000000e+000 result=40 02:07:01 Config A/D Result=40 02:07:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:01 Get A/D filter: -9.255963e+061 result=40 02:07:01 Get A/D value=-858993460 result=40 02:07:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:07:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:07:01 Aux= 02:07:01 Message to Camera, serial 205865 queued 02:07:38 Received message from Master: op=PointingHead serial=205878 02:07:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:07:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:07:38 Point started: ret=0 02:07:38 point_skyscan result=0 02:07:39 Check angles 02:07:39 SkyScan query 02:07:39 SkyScan query done: ret=0 az=152.55<-10170 ze=-21.225<-13415 Statuses=0009 0009 02:07:39 Msec=0 True Az=152.55 Ze=-21.225 Az status=0009 Ze status=0009 02:07:40 Check angles 02:07:40 SkyScan query 02:07:40 SkyScan query done: ret=0 az=134.64<-8976 ze=0.15<-11990 Statuses=0009 0009 02:07:40 Msec=750 True Az=134.64 Ze=0.15 Az status=0009 Ze status=0009 02:07:40 Check angles 02:07:40 SkyScan query 02:07:41 SkyScan query done: ret=0 az=117.12<-7808 ze=21.135<-10591 Statuses=0009 0009 02:07:41 Msec=1500 True Az=117.12 Ze=21.135 Az status=0009 Ze status=0009 02:07:41 Check angles 02:07:41 SkyScan query 02:07:42 SkyScan query done: ret=0 az=99.66<-6644 ze=42.045<-9197 Statuses=0009 0009 02:07:42 Msec=2250 True Az=99.66 Ze=42.045 Az status=0009 Ze status=0009 02:07:42 Check angles 02:07:42 SkyScan query 02:07:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 02:07:42 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 02:07:43 Check angles 02:07:43 SkyScan query 02:07:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:07:43 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 02:07:43 Message to Master queued w/err=0: serial=205878 error=0 02:07:48 Received message from Master: op=Filter serial=205879 02:07:48 Color wheel filter change from 0 to 0 02:07:48 FLIGetFilterPos err=0 currentPosition=0 02:07:48 FLIGetStepsRemaining err=0 RemainingSteps=0 02:07:48 Filter is already there-color wheel unchanged 02:07:48 Received message from Master: op=Shutter serial=205880 02:07:48 Shutter LASER close 02:07:48 Received message from Camera: op=State serial=205882 02:07:48 GetSingleValue result=40 Value=cccccccc 02:07:48 SkyScan query 02:07:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 02:07:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:49 Parameters OK 02:07:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:49 Set A/D data flow result=40 02:07:49 Set A/D channel type result=40 02:07:49 Set A/D encoding result=40 02:07:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:49 Set channel filter=0.000000e+000 result=40 02:07:49 Config A/D Result=40 02:07:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:49 Get A/D filter: -9.255963e+061 result=40 02:07:49 Get A/D value=-858993460 result=40 02:07:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:07:49 Parameters OK 02:07:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:07:49 Set A/D data flow result=40 02:07:49 Set A/D channel type result=40 02:07:49 Set A/D encoding result=40 02:07:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:07:49 Set channel filter=0.000000e+000 result=40 02:07:49 Config A/D Result=40 02:07:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:07:49 Get A/D filter: -9.255963e+061 result=40 02:07:49 Get A/D value=-858993460 result=40 02:07:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:07:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:07:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:07:49 Aux= 02:07:49 Message to Camera, serial 205882 queued 02:08:26 Received message from Master: op=PointingHead serial=205895 02:08:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:08:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:08:26 Point started: ret=0 02:08:26 point_skyscan result=0 02:08:27 Check angles 02:08:27 SkyScan query 02:08:27 SkyScan query done: ret=0 az=108.87<-7258 ze=38.475<-9435 Statuses=0009 0008 02:08:27 Msec=0 True Az=108.87 Ze=38.475 Az status=0009 Ze status=0008 02:08:28 Check angles 02:08:28 SkyScan query 02:08:28 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 02:08:28 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 02:08:28 Check angles 02:08:28 SkyScan query 02:08:29 SkyScan query done: ret=0 az=144.315<-9621 ze=38.505<-9433 Statuses=0009 0008 02:08:29 Msec=1500 True Az=144.315 Ze=38.505 Az status=0009 Ze status=0008 02:08:29 Check angles 02:08:29 SkyScan query 02:08:30 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 02:08:30 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 02:08:30 Check angles 02:08:30 SkyScan query 02:08:31 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 02:08:31 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 02:08:31 Check angles 02:08:31 SkyScan query 02:08:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:08:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:08:31 Message to Master queued w/err=0: serial=205895 error=0 02:08:36 Received message from Master: op=Filter serial=205896 02:08:36 Color wheel filter change from 0 to 0 02:08:36 FLIGetFilterPos err=0 currentPosition=0 02:08:36 FLIGetStepsRemaining err=0 RemainingSteps=0 02:08:36 Filter is already there-color wheel unchanged 02:08:36 Received message from Master: op=Shutter serial=205897 02:08:36 Shutter LASER close 02:08:36 Received message from Camera: op=State serial=205899 02:08:36 GetSingleValue result=40 Value=cccccccc 02:08:36 SkyScan query 02:08:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:08:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:37 Parameters OK 02:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:37 Set A/D data flow result=40 02:08:37 Set A/D channel type result=40 02:08:37 Set A/D encoding result=40 02:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:37 Set channel filter=0.000000e+000 result=40 02:08:37 Config A/D Result=40 02:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:37 Get A/D filter: -9.255963e+061 result=40 02:08:37 Get A/D value=-858993460 result=40 02:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:08:37 Parameters OK 02:08:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:08:37 Set A/D data flow result=40 02:08:37 Set A/D channel type result=40 02:08:37 Set A/D encoding result=40 02:08:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:08:37 Set channel filter=0.000000e+000 result=40 02:08:37 Config A/D Result=40 02:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:08:37 Get A/D filter: -9.255963e+061 result=40 02:08:37 Get A/D value=-858993460 result=40 02:08:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:08:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:08:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:08:37 Aux= 02:08:37 Message to Camera, serial 205899 queued 02:09:14 Received message from Master: op=PointingHead serial=205912 02:09:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:09:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:09:14 Point started: ret=0 02:09:14 point_skyscan result=0 02:09:15 Check angles 02:09:15 SkyScan query 02:09:16 SkyScan query done: ret=0 az=153.165<-10211 ze=8.955<-11403 Statuses=0009 0009 02:09:16 Msec=0 True Az=153.165 Ze=8.955 Az status=0009 Ze status=0009 02:09:16 Check angles 02:09:16 SkyScan query 02:09:16 SkyScan query done: ret=0 az=135.75<-9050 ze=-12.075<-12805 Statuses=0009 0009 02:09:16 Msec=750 True Az=135.75 Ze=-12.075 Az status=0009 Ze status=0009 02:09:16 Check angles 02:09:16 SkyScan query 02:09:17 SkyScan query done: ret=0 az=118.245<-7883 ze=-33<-14200 Statuses=0009 0009 02:09:17 Msec=1500 True Az=118.245 Ze=-33 Az status=0009 Ze status=0009 02:09:17 Check angles 02:09:17 SkyScan query 02:09:18 SkyScan query done: ret=0 az=100.875<-6725 ze=-51.525<-15435 Statuses=0009 0009 02:09:18 Msec=2250 True Az=100.875 Ze=-51.525 Az status=0009 Ze status=0009 02:09:18 Check angles 02:09:18 SkyScan query 02:09:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 02:09:19 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 02:09:19 Check angles 02:09:19 SkyScan query 02:09:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:09:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:09:19 Message to Master queued w/err=0: serial=205912 error=0 02:09:24 Received message from Master: op=Filter serial=205913 02:09:24 Color wheel filter change from 0 to 0 02:09:24 FLIGetFilterPos err=0 currentPosition=0 02:09:24 FLIGetStepsRemaining err=0 RemainingSteps=0 02:09:24 Filter is already there-color wheel unchanged 02:09:24 Received message from Master: op=Shutter serial=205914 02:09:24 Shutter LASER close 02:09:25 Received message from Camera: op=State serial=205916 02:09:25 GetSingleValue result=40 Value=cccccccc 02:09:25 SkyScan query 02:09:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:09:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:25 Parameters OK 02:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:25 Set A/D data flow result=40 02:09:25 Set A/D channel type result=40 02:09:25 Set A/D encoding result=40 02:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:25 Set channel filter=0.000000e+000 result=40 02:09:25 Config A/D Result=40 02:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:25 Get A/D filter: -9.255963e+061 result=40 02:09:25 Get A/D value=-858993460 result=40 02:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:09:25 Parameters OK 02:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:09:25 Set A/D data flow result=40 02:09:25 Set A/D channel type result=40 02:09:25 Set A/D encoding result=40 02:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:09:25 Set channel filter=0.000000e+000 result=40 02:09:25 Config A/D Result=40 02:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:09:25 Get A/D filter: -9.255963e+061 result=40 02:09:25 Get A/D value=-858993460 result=40 02:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:09:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:09:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:09:25 Aux= 02:09:25 Message to Camera, serial 205916 queued 02:10:02 Received message from Master: op=PointingHead serial=205929 02:10:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:10:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:10:02 Point started: ret=0 02:10:02 point_skyscan result=0 02:10:03 Check angles 02:10:03 SkyScan query 02:10:04 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.165<-17411 Statuses=0009 0009 02:10:04 Msec=0 True Az=108.855 Ze=-81.165 Az status=0009 Ze status=0009 02:10:04 Check angles 02:10:04 SkyScan query 02:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.15<-18810 Statuses=0008 0009 02:10:04 Msec=750 True Az=112.995 Ze=-102.15 Az status=0008 Ze status=0009 02:10:05 Check angles 02:10:05 SkyScan query 02:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.555<-20237 Statuses=0008 0009 02:10:05 Msec=1500 True Az=112.995 Ze=-123.555 Az status=0008 Ze status=0009 02:10:05 Check angles 02:10:05 SkyScan query 02:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.465<-21631 Statuses=0008 0009 02:10:06 Msec=2250 True Az=112.995 Ze=-144.465 Az status=0008 Ze status=0009 02:10:06 Check angles 02:10:06 SkyScan query 02:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.42<-23028 Statuses=0008 0009 02:10:07 Msec=3000 True Az=112.995 Ze=-165.42 Az status=0008 Ze status=0009 02:10:07 Check angles 02:10:07 SkyScan query 02:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:10:07 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:10:07 Message to Master queued w/err=0: serial=205929 error=0 02:10:12 Received message from Master: op=Filter serial=205930 02:10:12 Color wheel filter change from 0 to 0 02:10:12 FLIGetFilterPos err=0 currentPosition=0 02:10:12 FLIGetStepsRemaining err=0 RemainingSteps=0 02:10:12 Filter is already there-color wheel unchanged 02:10:13 Received message from Master: op=Shutter serial=205931 02:10:13 Shutter LASER open 02:10:13 Received message from Camera: op=State serial=205933 02:10:13 GetSingleValue result=40 Value=cccccccc 02:10:13 SkyScan query 02:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:10:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:13 Parameters OK 02:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:13 Set A/D data flow result=40 02:10:13 Set A/D channel type result=40 02:10:13 Set A/D encoding result=40 02:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:13 Set channel filter=0.000000e+000 result=40 02:10:13 Config A/D Result=40 02:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:13 Get A/D filter: -9.255963e+061 result=40 02:10:13 Get A/D value=-858993460 result=40 02:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:13 Parameters OK 02:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:13 Set A/D data flow result=40 02:10:13 Set A/D channel type result=40 02:10:13 Set A/D encoding result=40 02:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:13 Set channel filter=0.000000e+000 result=40 02:10:13 Config A/D Result=40 02:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:13 Get A/D filter: -9.255963e+061 result=40 02:10:13 Get A/D value=-858993460 result=40 02:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:10:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:10:13 Aux= 02:10:13 Message to Camera, serial 205933 queued 02:10:22 Received message from Master: op=Shutter serial=205943 02:10:22 Shutter LASER close 02:10:22 Received message from Master: op=PointingHead serial=205947 02:10:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:10:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:10:23 Point started: ret=0 02:10:23 point_skyscan result=0 02:10:23 Check angles 02:10:23 SkyScan query 02:10:24 SkyScan query done: ret=0 az=89.865<-5991 ze=157.245<-1517 Statuses=0009 0009 02:10:24 Msec=0 True Az=89.865 Ze=157.245 Az status=0009 Ze status=0009 02:10:24 Check angles 02:10:24 SkyScan query 02:10:25 SkyScan query done: ret=0 az=72.435<-4829 ze=136.29<-2914 Statuses=0009 0009 02:10:25 Msec=750 True Az=72.435 Ze=136.29 Az status=0009 Ze status=0009 02:10:25 Check angles 02:10:25 SkyScan query 02:10:25 SkyScan query done: ret=0 az=54.6<-3640 ze=114.885<-4341 Statuses=0009 0009 02:10:25 Msec=1500 True Az=54.6 Ze=114.885 Az status=0009 Ze status=0009 02:10:26 Check angles 02:10:26 SkyScan query 02:10:26 SkyScan query done: ret=0 az=41.01<-2734 ze=93.945<-5737 Statuses=0009 0009 02:10:26 Msec=2250 True Az=41.01 Ze=93.945 Az status=0009 Ze status=0009 02:10:26 Check angles 02:10:26 SkyScan query 02:10:27 SkyScan query done: ret=0 az=40.98<-2732 ze=72.93<-7138 Statuses=0008 0009 02:10:27 Msec=3000 True Az=40.98 Ze=72.93 Az status=0008 Ze status=0009 02:10:27 Check angles 02:10:27 SkyScan query 02:10:28 SkyScan query done: ret=0 az=40.98<-2732 ze=52.305<-8513 Statuses=0008 0009 02:10:28 Msec=3750 True Az=40.98 Ze=52.305 Az status=0008 Ze status=0009 02:10:28 Check angles 02:10:28 SkyScan query 02:10:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:10:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:10:28 Message to Master queued w/err=0: serial=205947 error=0 02:10:33 Received message from Master: op=Filter serial=205948 02:10:33 Color wheel filter change from 0 to 0 02:10:33 FLIGetFilterPos err=0 currentPosition=0 02:10:33 FLIGetStepsRemaining err=0 RemainingSteps=0 02:10:33 Filter is already there-color wheel unchanged 02:10:34 Received message from Master: op=Shutter serial=205949 02:10:34 Shutter LASER close 02:10:34 Received message from Camera: op=State serial=205951 02:10:34 GetSingleValue result=40 Value=cccccccc 02:10:34 SkyScan query 02:10:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:10:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:34 Parameters OK 02:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:34 Set A/D data flow result=40 02:10:34 Set A/D channel type result=40 02:10:34 Set A/D encoding result=40 02:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:34 Set channel filter=0.000000e+000 result=40 02:10:34 Config A/D Result=40 02:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:34 Get A/D filter: -9.255963e+061 result=40 02:10:34 Get A/D value=-858993460 result=40 02:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:10:34 Parameters OK 02:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:10:34 Set A/D data flow result=40 02:10:34 Set A/D channel type result=40 02:10:34 Set A/D encoding result=40 02:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:10:34 Set channel filter=0.000000e+000 result=40 02:10:34 Config A/D Result=40 02:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:10:34 Get A/D filter: -9.255963e+061 result=40 02:10:34 Get A/D value=-858993460 result=40 02:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:10:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:10:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:10:34 Aux= 02:10:34 Message to Camera, serial 205951 queued 02:11:11 Received message from Master: op=PointingHead serial=205964 02:11:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:11:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:11:12 Point started: ret=0 02:11:12 point_skyscan result=0 02:11:12 Check angles 02:11:12 SkyScan query 02:11:13 SkyScan query done: ret=0 az=40.995<-2733 ze=21.315<-10579 Statuses=0008 0009 02:11:13 Msec=0 True Az=40.995 Ze=21.315 Az status=0008 Ze status=0009 02:11:13 Check angles 02:11:13 SkyScan query 02:11:14 SkyScan query done: ret=0 az=41.01<-2734 ze=0.315<-11979 Statuses=0008 0009 02:11:14 Msec=750 True Az=41.01 Ze=0.315 Az status=0008 Ze status=0009 02:11:14 Check angles 02:11:14 SkyScan query 02:11:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.64<-13376 Statuses=0008 0009 02:11:14 Msec=1500 True Az=40.995 Ze=-20.64 Az status=0008 Ze status=0009 02:11:15 Check angles 02:11:15 SkyScan query 02:11:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 02:11:15 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 02:11:15 Check angles 02:11:15 SkyScan query 02:11:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:11:16 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:11:16 Message to Master queued w/err=0: serial=205964 error=0 02:11:21 Received message from Master: op=Filter serial=205965 02:11:21 Color wheel filter change from 0 to 0 02:11:21 FLIGetFilterPos err=0 currentPosition=0 02:11:21 FLIGetStepsRemaining err=0 RemainingSteps=0 02:11:21 Filter is already there-color wheel unchanged 02:11:21 Received message from Master: op=Shutter serial=205966 02:11:21 Shutter LASER close 02:11:21 Received message from Camera: op=State serial=205968 02:11:21 GetSingleValue result=40 Value=cccccccc 02:11:21 SkyScan query 02:11:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:11:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:22 Parameters OK 02:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:22 Set A/D data flow result=40 02:11:22 Set A/D channel type result=40 02:11:22 Set A/D encoding result=40 02:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:22 Set channel filter=0.000000e+000 result=40 02:11:22 Config A/D Result=40 02:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:22 Get A/D filter: -9.255963e+061 result=40 02:11:22 Get A/D value=-858993460 result=40 02:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:11:22 Parameters OK 02:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:11:22 Set A/D data flow result=40 02:11:22 Set A/D channel type result=40 02:11:22 Set A/D encoding result=40 02:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:11:22 Set channel filter=0.000000e+000 result=40 02:11:22 Config A/D Result=40 02:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:11:22 Get A/D filter: -9.255963e+061 result=40 02:11:22 Get A/D value=-858993460 result=40 02:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:11:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:11:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:11:22 Aux= 02:11:22 Message to Camera, serial 205968 queued 02:11:58 Received message from Master: op=PointingHead serial=205980 02:11:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:11:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:11:58 Point started: ret=0 02:11:58 point_skyscan result=0 02:11:59 Check angles 02:11:59 SkyScan query 02:11:59 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.4<-16560 Statuses=0009 0009 02:11:59 Msec=0 True Az=64.23 Ze=-68.4 Az status=0009 Ze status=0009 02:11:59 Check angles 02:11:59 SkyScan query 02:12:00 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.415<-17961 Statuses=0009 0009 02:12:00 Msec=750 True Az=81.645 Ze=-89.415 Az status=0009 Ze status=0009 02:12:00 Check angles 02:12:00 SkyScan query 02:12:01 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.34<-19356 Statuses=0009 0009 02:12:01 Msec=1500 True Az=99.12 Ze=-110.34 Az status=0009 Ze status=0009 02:12:01 Check angles 02:12:01 SkyScan query 02:12:02 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.28<-20752 Statuses=0009 0009 02:12:02 Msec=2250 True Az=116.52 Ze=-131.28 Az status=0009 Ze status=0009 02:12:02 Check angles 02:12:02 SkyScan query 02:12:02 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 02:12:02 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 02:12:02 Check angles 02:12:02 SkyScan query 02:12:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:12:03 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:12:03 Message to Master queued w/err=0: serial=205980 error=0 02:12:08 Received message from Master: op=Filter serial=205981 02:12:08 Color wheel filter change from 0 to 0 02:12:08 FLIGetFilterPos err=0 currentPosition=0 02:12:08 FLIGetStepsRemaining err=0 RemainingSteps=0 02:12:08 Filter is already there-color wheel unchanged 02:12:08 Received message from Master: op=Shutter serial=205982 02:12:08 Shutter LASER close 02:12:08 Received message from Camera: op=State serial=205984 02:12:08 GetSingleValue result=40 Value=cccccccc 02:12:08 SkyScan query 02:12:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:12:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:09 Parameters OK 02:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:09 Set A/D data flow result=40 02:12:09 Set A/D channel type result=40 02:12:09 Set A/D encoding result=40 02:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:09 Set channel filter=0.000000e+000 result=40 02:12:09 Config A/D Result=40 02:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:09 Get A/D filter: -9.255963e+061 result=40 02:12:09 Get A/D value=-858993460 result=40 02:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:09 Parameters OK 02:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:09 Set A/D data flow result=40 02:12:09 Set A/D channel type result=40 02:12:09 Set A/D encoding result=40 02:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:09 Set channel filter=0.000000e+000 result=40 02:12:09 Config A/D Result=40 02:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:09 Get A/D filter: -9.255963e+061 result=40 02:12:09 Get A/D value=-858993460 result=40 02:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:12:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:12:09 Aux= 02:12:09 Message to Camera, serial 205984 queued 02:12:46 Received message from Master: op=PointingHead serial=205997 02:12:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:12:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:12:46 Point started: ret=0 02:12:46 point_skyscan result=0 02:12:47 Check angles 02:12:47 SkyScan query 02:12:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0009 0009 02:12:47 Msec=0 True Az=112.995 Ze=-171.135 Az status=0009 Ze status=0009 02:12:48 Check angles 02:12:48 SkyScan query 02:12:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:12:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:12:48 Message to Master queued w/err=0: serial=205997 error=0 02:12:53 Received message from Master: op=Filter serial=205998 02:12:53 Color wheel filter change from 0 to 0 02:12:53 FLIGetFilterPos err=0 currentPosition=0 02:12:53 FLIGetStepsRemaining err=0 RemainingSteps=0 02:12:53 Filter is already there-color wheel unchanged 02:12:53 Received message from Master: op=Shutter serial=205999 02:12:53 Shutter LASER open 02:12:53 Received message from Camera: op=State serial=206001 02:12:53 GetSingleValue result=40 Value=cccccccc 02:12:53 SkyScan query 02:12:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 02:12:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:54 Parameters OK 02:12:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:54 Set A/D data flow result=40 02:12:54 Set A/D channel type result=40 02:12:54 Set A/D encoding result=40 02:12:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:54 Set channel filter=0.000000e+000 result=40 02:12:54 Config A/D Result=40 02:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:54 Get A/D filter: -9.255963e+061 result=40 02:12:54 Get A/D value=-858993460 result=40 02:12:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:12:54 Parameters OK 02:12:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:12:54 Set A/D data flow result=40 02:12:54 Set A/D channel type result=40 02:12:54 Set A/D encoding result=40 02:12:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:12:54 Set channel filter=0.000000e+000 result=40 02:12:54 Config A/D Result=40 02:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:12:54 Get A/D filter: -9.255963e+061 result=40 02:12:54 Get A/D value=-858993460 result=40 02:12:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:12:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:12:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:12:54 Aux= 02:12:54 Message to Camera, serial 206001 queued 02:13:02 Received message from Master: op=Shutter serial=206011 02:13:02 Shutter LASER close 02:13:03 Received message from Master: op=PointingHead serial=206015 02:13:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:13:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:13:03 Point started: ret=0 02:13:03 point_skyscan result=0 02:13:04 Check angles 02:13:04 SkyScan query 02:13:05 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.115<-21541 Statuses=0009 0009 02:13:05 Msec=0 True Az=136.17 Ze=-143.115 Az status=0009 Ze status=0009 02:13:05 Check angles 02:13:05 SkyScan query 02:13:06 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.115<-20141 Statuses=0009 0009 02:13:06 Msec=750 True Az=153.57 Ze=-122.115 Az status=0009 Ze status=0009 02:13:06 Check angles 02:13:06 SkyScan query 02:13:06 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.16<-18744 Statuses=0009 0009 02:13:06 Msec=1500 True Az=171.105 Ze=-101.16 Az status=0009 Ze status=0009 02:13:06 Check angles 02:13:06 SkyScan query 02:13:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.25<-17350 Statuses=0008 0009 02:13:07 Msec=2250 True Az=176.01 Ze=-80.25 Az status=0008 Ze status=0009 02:13:07 Check angles 02:13:07 SkyScan query 02:13:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.25<-15950 Statuses=0008 0009 02:13:08 Msec=3000 True Az=175.995 Ze=-59.25 Az status=0008 Ze status=0009 02:13:08 Check angles 02:13:08 SkyScan query 02:13:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:13:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:13:09 Message to Master queued w/err=0: serial=206015 error=0 02:13:14 Received message from Master: op=Filter serial=206016 02:13:14 Color wheel filter change from 0 to 0 02:13:14 FLIGetFilterPos err=0 currentPosition=0 02:13:14 FLIGetStepsRemaining err=0 RemainingSteps=0 02:13:14 Filter is already there-color wheel unchanged 02:13:14 Received message from Master: op=Shutter serial=206017 02:13:14 Shutter LASER close 02:13:14 Received message from Camera: op=State serial=206019 02:13:14 GetSingleValue result=40 Value=cccccccc 02:13:14 SkyScan query 02:13:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:13:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:14 Parameters OK 02:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:14 Set A/D data flow result=40 02:13:14 Set A/D channel type result=40 02:13:14 Set A/D encoding result=40 02:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:14 Set channel filter=0.000000e+000 result=40 02:13:14 Config A/D Result=40 02:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:14 Get A/D filter: -9.255963e+061 result=40 02:13:14 Get A/D value=-858993460 result=40 02:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:13:14 Parameters OK 02:13:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:13:14 Set A/D data flow result=40 02:13:14 Set A/D channel type result=40 02:13:14 Set A/D encoding result=40 02:13:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:13:14 Set channel filter=0.000000e+000 result=40 02:13:14 Config A/D Result=40 02:13:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:13:14 Get A/D filter: -9.255963e+061 result=40 02:13:14 Get A/D value=-858993460 result=40 02:13:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:13:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:13:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:13:14 Aux= 02:13:14 Message to Camera, serial 206019 queued 02:13:51 Received message from Master: op=PointingHead serial=206032 02:13:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:13:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:13:52 Point started: ret=0 02:13:52 point_skyscan result=0 02:13:52 Check angles 02:13:52 SkyScan query 02:13:53 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.225<-13415 Statuses=0009 0009 02:13:53 Msec=0 True Az=152.595 Ze=-21.225 Az status=0009 Ze status=0009 02:13:53 Check angles 02:13:53 SkyScan query 02:13:54 SkyScan query done: ret=0 az=135.075<-9005 ze=-0.285<-12019 Statuses=0009 0009 02:13:54 Msec=750 True Az=135.075 Ze=-0.285 Az status=0009 Ze status=0009 02:13:54 Check angles 02:13:54 SkyScan query 02:13:54 SkyScan query done: ret=0 az=117.585<-7839 ze=20.7<-10620 Statuses=0009 0009 02:13:54 Msec=1500 True Az=117.585 Ze=20.7 Az status=0009 Ze status=0009 02:13:55 Check angles 02:13:55 SkyScan query 02:13:55 SkyScan query done: ret=0 az=100.23<-6682 ze=41.625<-9225 Statuses=0009 0009 02:13:55 Msec=2250 True Az=100.23 Ze=41.625 Az status=0009 Ze status=0009 02:13:55 Check angles 02:13:55 SkyScan query 02:13:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 02:13:56 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 02:13:56 Check angles 02:13:56 SkyScan query 02:13:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:13:57 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 02:13:57 Message to Master queued w/err=0: serial=206032 error=0 02:14:02 Received message from Master: op=Filter serial=206033 02:14:02 Color wheel filter change from 0 to 0 02:14:02 FLIGetFilterPos err=0 currentPosition=0 02:14:02 FLIGetStepsRemaining err=0 RemainingSteps=0 02:14:02 Filter is already there-color wheel unchanged 02:14:02 Received message from Master: op=Shutter serial=206034 02:14:02 Shutter LASER close 02:14:02 Received message from Camera: op=State serial=206036 02:14:02 GetSingleValue result=40 Value=cccccccc 02:14:02 SkyScan query 02:14:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:02 Parameters OK 02:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:02 Set A/D data flow result=40 02:14:02 Set A/D channel type result=40 02:14:02 Set A/D encoding result=40 02:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:02 Set channel filter=0.000000e+000 result=40 02:14:02 Config A/D Result=40 02:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:02 Get A/D filter: -9.255963e+061 result=40 02:14:02 Get A/D value=-858993460 result=40 02:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:02 Parameters OK 02:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:02 Set A/D data flow result=40 02:14:02 Set A/D channel type result=40 02:14:02 Set A/D encoding result=40 02:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:02 Set channel filter=0.000000e+000 result=40 02:14:02 Config A/D Result=40 02:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:02 Get A/D filter: -9.255963e+061 result=40 02:14:02 Get A/D value=-858993460 result=40 02:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:14:02 Aux= 02:14:02 Message to Camera, serial 206036 queued 02:14:39 Received message from Master: op=PointingHead serial=206049 02:14:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:14:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:14:40 Point started: ret=0 02:14:40 point_skyscan result=0 02:14:40 Check angles 02:14:40 SkyScan query 02:14:41 SkyScan query done: ret=0 az=109.305<-7287 ze=38.475<-9435 Statuses=0009 0008 02:14:41 Msec=0 True Az=109.305 Ze=38.475 Az status=0009 Ze status=0008 02:14:41 Check angles 02:14:41 SkyScan query 02:14:42 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 02:14:42 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 02:14:42 Check angles 02:14:42 SkyScan query 02:14:42 SkyScan query done: ret=0 az=144.315<-9621 ze=38.505<-9433 Statuses=0009 0008 02:14:42 Msec=1500 True Az=144.315 Ze=38.505 Az status=0009 Ze status=0008 02:14:43 Check angles 02:14:43 SkyScan query 02:14:43 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 02:14:43 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 02:14:43 Check angles 02:14:43 SkyScan query 02:14:44 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 02:14:44 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 02:14:44 Check angles 02:14:44 SkyScan query 02:14:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:14:45 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:14:45 Message to Master queued w/err=0: serial=206049 error=0 02:14:50 Received message from Master: op=Filter serial=206050 02:14:50 Color wheel filter change from 0 to 0 02:14:50 FLIGetFilterPos err=0 currentPosition=0 02:14:50 FLIGetStepsRemaining err=0 RemainingSteps=0 02:14:50 Filter is already there-color wheel unchanged 02:14:50 Received message from Master: op=Shutter serial=206051 02:14:50 Shutter LASER close 02:14:50 Received message from Camera: op=State serial=206053 02:14:50 GetSingleValue result=40 Value=cccccccc 02:14:50 SkyScan query 02:14:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:14:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:51 Parameters OK 02:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:51 Set A/D data flow result=40 02:14:51 Set A/D channel type result=40 02:14:51 Set A/D encoding result=40 02:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:51 Set channel filter=0.000000e+000 result=40 02:14:51 Config A/D Result=40 02:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:51 Get A/D filter: -9.255963e+061 result=40 02:14:51 Get A/D value=-858993460 result=40 02:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:14:51 Parameters OK 02:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:14:51 Set A/D data flow result=40 02:14:51 Set A/D channel type result=40 02:14:51 Set A/D encoding result=40 02:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:14:51 Set channel filter=0.000000e+000 result=40 02:14:51 Config A/D Result=40 02:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:14:51 Get A/D filter: -9.255963e+061 result=40 02:14:51 Get A/D value=-858993460 result=40 02:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:14:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:14:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:14:51 Aux= 02:14:51 Message to Camera, serial 206053 queued 02:15:27 Received message from Master: op=Identify serial=206062 02:15:27 Received message from Master: op=PointingHead serial=206069 02:15:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:15:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:15:28 Point started: ret=0 02:15:28 point_skyscan result=0 02:15:28 Check angles 02:15:28 SkyScan query 02:15:29 SkyScan query done: ret=0 az=153.105<-10207 ze=8.895<-11407 Statuses=0009 0009 02:15:29 Msec=0 True Az=153.105 Ze=8.895 Az status=0009 Ze status=0009 02:15:29 Check angles 02:15:29 SkyScan query 02:15:30 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.135<-12809 Statuses=0009 0009 02:15:30 Msec=750 True Az=135.705 Ze=-12.135 Az status=0009 Ze status=0009 02:15:30 Check angles 02:15:30 SkyScan query 02:15:31 SkyScan query done: ret=0 az=118.185<-7879 ze=-33<-14200 Statuses=0009 0009 02:15:31 Msec=1500 True Az=118.185 Ze=-33 Az status=0009 Ze status=0009 02:15:31 Check angles 02:15:31 SkyScan query 02:15:31 SkyScan query done: ret=0 az=100.755<-6717 ze=-51.54<-15436 Statuses=0009 0009 02:15:31 Msec=2250 True Az=100.755 Ze=-51.54 Az status=0009 Ze status=0009 02:15:31 Check angles 02:15:31 SkyScan query 02:15:32 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 02:15:32 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 02:15:32 Check angles 02:15:32 SkyScan query 02:15:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:15:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:15:33 Message to Master queued w/err=0: serial=206069 error=0 02:15:38 Received message from Master: op=Filter serial=206070 02:15:38 Color wheel filter change from 0 to 0 02:15:38 FLIGetFilterPos err=0 currentPosition=0 02:15:38 FLIGetStepsRemaining err=0 RemainingSteps=0 02:15:38 Filter is already there-color wheel unchanged 02:15:38 Received message from Master: op=Shutter serial=206071 02:15:38 Shutter LASER close 02:15:38 Received message from Camera: op=State serial=206073 02:15:38 GetSingleValue result=40 Value=cccccccc 02:15:38 SkyScan query 02:15:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:39 Parameters OK 02:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:39 Set A/D data flow result=40 [UTC 2018-12-17 02:15:39] 02:15:39 Set A/D channel type result=40 02:15:39 Set A/D encoding result=40 02:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:39 Set channel filter=0.000000e+000 result=40 02:15:39 Config A/D Result=40 02:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:39 Get A/D filter: -9.255963e+061 result=40 02:15:39 Get A/D value=-858993460 result=40 02:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:15:39 Parameters OK 02:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:15:39 Set A/D data flow result=40 02:15:39 Set A/D channel type result=40 02:15:39 Set A/D encoding result=40 02:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:15:39 Set channel filter=0.000000e+000 result=40 02:15:39 Config A/D Result=40 02:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:15:39 Get A/D filter: -9.255963e+061 result=40 02:15:39 Get A/D value=-858993460 result=40 02:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:15:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:15:39 Aux= 02:15:39 Message to Camera, serial 206073 queued [UTC 2018-12-17 02:15:52] 02:16:15 Received message from Master: op=PointingHead serial=206086 02:16:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:16:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:16:16 Point started: ret=0 02:16:16 point_skyscan result=0 02:16:17 Check angles 02:16:17 SkyScan query 02:16:17 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.81<-17454 Statuses=0009 0009 02:16:17 Msec=0 True Az=109.365 Ze=-81.81 Az status=0009 Ze status=0009 02:16:17 Check angles 02:16:17 SkyScan query 02:16:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 02:16:18 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 02:16:18 Check angles 02:16:18 SkyScan query 02:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 02:16:19 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 02:16:19 Check angles 02:16:19 SkyScan query 02:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 02:16:19 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 02:16:20 Check angles 02:16:20 SkyScan query 02:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 02:16:20 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 02:16:20 Check angles 02:16:20 SkyScan query 02:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:16:21 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:16:21 Message to Master queued w/err=0: serial=206086 error=0 02:16:26 Received message from Master: op=Filter serial=206087 02:16:26 Color wheel filter change from 0 to 0 02:16:26 FLIGetFilterPos err=0 currentPosition=0 02:16:26 FLIGetStepsRemaining err=0 RemainingSteps=0 02:16:26 Filter is already there-color wheel unchanged 02:16:26 Received message from Master: op=Shutter serial=206088 02:16:26 Shutter LASER open 02:16:26 Received message from Camera: op=State serial=206090 02:16:26 GetSingleValue result=40 Value=cccccccc 02:16:26 SkyScan query 02:16:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:16:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:27 Parameters OK 02:16:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:27 Set A/D data flow result=40 02:16:27 Set A/D channel type result=40 02:16:27 Set A/D encoding result=40 02:16:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:27 Set channel filter=0.000000e+000 result=40 02:16:27 Config A/D Result=40 02:16:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:27 Get A/D filter: -9.255963e+061 result=40 02:16:27 Get A/D value=-858993460 result=40 02:16:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:27 Parameters OK 02:16:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:27 Set A/D data flow result=40 02:16:27 Set A/D channel type result=40 02:16:27 Set A/D encoding result=40 02:16:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:27 Set channel filter=0.000000e+000 result=40 02:16:27 Config A/D Result=40 02:16:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:27 Get A/D filter: -9.255963e+061 result=40 02:16:27 Get A/D value=-858993460 result=40 02:16:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:16:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:16:27 Aux= 02:16:27 Message to Camera, serial 206090 queued 02:16:35 Received message from Master: op=Shutter serial=206100 02:16:35 Shutter LASER close 02:16:36 Received message from Master: op=PointingHead serial=206104 02:16:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:16:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:16:36 Point started: ret=0 02:16:36 point_skyscan result=0 02:16:37 Check angles 02:16:37 SkyScan query 02:16:37 SkyScan query done: ret=0 az=89.85<-5990 ze=157.35<-1510 Statuses=0009 0009 02:16:37 Msec=0 True Az=89.85 Ze=157.35 Az status=0009 Ze status=0009 02:16:38 Check angles 02:16:38 SkyScan query 02:16:38 SkyScan query done: ret=0 az=72.435<-4829 ze=136.38<-2908 Statuses=0009 0009 02:16:38 Msec=750 True Az=72.435 Ze=136.38 Az status=0009 Ze status=0009 02:16:38 Check angles 02:16:38 SkyScan query 02:16:39 SkyScan query done: ret=0 az=55.14<-3676 ze=115.485<-4301 Statuses=0009 0009 02:16:39 Msec=1500 True Az=55.14 Ze=115.485 Az status=0009 Ze status=0009 02:16:39 Check angles 02:16:39 SkyScan query 02:16:40 SkyScan query done: ret=0 az=40.995<-2733 ze=94.5<-5700 Statuses=0009 0009 02:16:40 Msec=2250 True Az=40.995 Ze=94.5 Az status=0009 Ze status=0009 02:16:40 Check angles 02:16:40 SkyScan query 02:16:40 SkyScan query done: ret=0 az=40.98<-2732 ze=73.05<-7130 Statuses=0008 0009 02:16:40 Msec=3000 True Az=40.98 Ze=73.05 Az status=0008 Ze status=0009 02:16:41 Check angles 02:16:41 SkyScan query 02:16:41 SkyScan query done: ret=0 az=40.98<-2732 ze=52.65<-8490 Statuses=0008 0009 02:16:41 Msec=3750 True Az=40.98 Ze=52.65 Az status=0008 Ze status=0009 02:16:41 Check angles 02:16:41 SkyScan query 02:16:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:16:42 Msec=4500 True Az=40.995 Ze=51.495 Az status=0008 Ze status=0008 02:16:42 Message to Master queued w/err=0: serial=206104 error=0 02:16:47 Received message from Master: op=Filter serial=206105 02:16:47 Color wheel filter change from 0 to 0 02:16:47 FLIGetFilterPos err=0 currentPosition=0 02:16:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:16:47 Filter is already there-color wheel unchanged 02:16:47 Received message from Master: op=Shutter serial=206106 02:16:47 Shutter LASER close 02:16:47 Received message from Camera: op=State serial=206108 02:16:47 GetSingleValue result=40 Value=cccccccc 02:16:47 SkyScan query 02:16:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.51<-8566 Statuses=0008 0008 02:16:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:48 Parameters OK 02:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:48 Set A/D data flow result=40 02:16:48 Set A/D channel type result=40 02:16:48 Set A/D encoding result=40 02:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:48 Set channel filter=0.000000e+000 result=40 02:16:48 Config A/D Result=40 02:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:48 Get A/D filter: -9.255963e+061 result=40 02:16:48 Get A/D value=-858993460 result=40 02:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:16:48 Parameters OK 02:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:16:48 Set A/D data flow result=40 02:16:48 Set A/D channel type result=40 02:16:48 Set A/D encoding result=40 02:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:16:48 Set channel filter=0.000000e+000 result=40 02:16:48 Config A/D Result=40 02:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:16:48 Get A/D filter: -9.255963e+061 result=40 02:16:48 Get A/D value=-858993460 result=40 02:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:16:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.509998 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:16:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:16:48 Aux= 02:16:48 Message to Camera, serial 206108 queued 02:17:25 Received message from Master: op=PointingHead serial=206121 02:17:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:17:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:17:25 Point started: ret=0 02:17:25 point_skyscan result=0 02:17:26 Check angles 02:17:26 SkyScan query 02:17:27 SkyScan query done: ret=0 az=40.995<-2733 ze=21.465<-10569 Statuses=0008 0009 02:17:27 Msec=0 True Az=40.995 Ze=21.465 Az status=0008 Ze status=0009 02:17:27 Check angles 02:17:27 SkyScan query 02:17:27 SkyScan query done: ret=0 az=41.01<-2734 ze=0.465<-11969 Statuses=0008 0009 02:17:27 Msec=750 True Az=41.01 Ze=0.465 Az status=0008 Ze status=0009 02:17:27 Check angles 02:17:27 SkyScan query 02:17:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.49<-13366 Statuses=0008 0009 02:17:28 Msec=1500 True Az=40.995 Ze=-20.49 Az status=0008 Ze status=0009 02:17:28 Check angles 02:17:28 SkyScan query 02:17:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 02:17:29 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 02:17:29 Check angles 02:17:29 SkyScan query 02:17:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:17:30 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:17:30 Message to Master queued w/err=0: serial=206121 error=0 02:17:35 Received message from Master: op=Filter serial=206122 02:17:35 Color wheel filter change from 0 to 0 02:17:35 FLIGetFilterPos err=0 currentPosition=0 02:17:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:17:35 Filter is already there-color wheel unchanged 02:17:35 Received message from Master: op=Shutter serial=206123 02:17:35 Shutter LASER close 02:17:35 Received message from Camera: op=State serial=206125 02:17:35 GetSingleValue result=40 Value=cccccccc 02:17:35 SkyScan query 02:17:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:17:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:35 Parameters OK 02:17:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:35 Set A/D data flow result=40 02:17:35 Set A/D channel type result=40 02:17:35 Set A/D encoding result=40 02:17:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:35 Set channel filter=0.000000e+000 result=40 02:17:35 Config A/D Result=40 02:17:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:35 Get A/D filter: -9.255963e+061 result=40 02:17:35 Get A/D value=-858993460 result=40 02:17:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:17:35 Parameters OK 02:17:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:17:35 Set A/D data flow result=40 02:17:35 Set A/D channel type result=40 02:17:35 Set A/D encoding result=40 02:17:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:17:35 Set channel filter=0.000000e+000 result=40 02:17:35 Config A/D Result=40 02:17:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:17:35 Get A/D filter: -9.255963e+061 result=40 02:17:35 Get A/D value=-858993460 result=40 02:17:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:17:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:17:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:17:35 Aux= 02:17:35 Message to Camera, serial 206125 queued 02:18:11 Received message from Master: op=PointingHead serial=206137 02:18:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:18:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:18:12 Point started: ret=0 02:18:12 point_skyscan result=0 02:18:12 Check angles 02:18:12 SkyScan query 02:18:13 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.655<-16577 Statuses=0009 0009 02:18:13 Msec=0 True Az=64.29 Ze=-68.655 Az status=0009 Ze status=0009 02:18:13 Check angles 02:18:13 SkyScan query 02:18:14 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.64<-17976 Statuses=0009 0009 02:18:14 Msec=750 True Az=81.855 Ze=-89.64 Az status=0009 Ze status=0009 02:18:14 Check angles 02:18:14 SkyScan query 02:18:14 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.625<-19375 Statuses=0009 0009 02:18:14 Msec=1500 True Az=99.435 Ze=-110.625 Az status=0009 Ze status=0009 02:18:15 Check angles 02:18:15 SkyScan query 02:18:15 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.97<-20798 Statuses=0009 0009 02:18:15 Msec=2250 True Az=117.105 Ze=-131.97 Az status=0009 Ze status=0009 02:18:15 Check angles 02:18:15 SkyScan query 02:18:16 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 02:18:16 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 02:18:16 Check angles 02:18:16 SkyScan query 02:18:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 02:18:17 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 02:18:17 Message to Master queued w/err=0: serial=206137 error=0 02:18:22 Received message from Master: op=Filter serial=206138 02:18:22 Color wheel filter change from 0 to 0 02:18:22 FLIGetFilterPos err=0 currentPosition=0 02:18:22 FLIGetStepsRemaining err=0 RemainingSteps=0 02:18:22 Filter is already there-color wheel unchanged 02:18:22 Received message from Master: op=Shutter serial=206139 02:18:22 Shutter LASER close 02:18:22 Received message from Camera: op=State serial=206141 02:18:22 GetSingleValue result=40 Value=cccccccc 02:18:22 SkyScan query 02:18:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:18:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:22 Parameters OK 02:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:22 Set A/D data flow result=40 02:18:22 Set A/D channel type result=40 02:18:22 Set A/D encoding result=40 02:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:22 Set channel filter=0.000000e+000 result=40 02:18:22 Config A/D Result=40 02:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:22 Get A/D filter: -9.255963e+061 result=40 02:18:22 Get A/D value=-858993460 result=40 02:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:18:22 Parameters OK 02:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:18:22 Set A/D data flow result=40 02:18:22 Set A/D channel type result=40 02:18:22 Set A/D encoding result=40 02:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:18:22 Set channel filter=0.000000e+000 result=40 02:18:22 Config A/D Result=40 02:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:18:22 Get A/D filter: -9.255963e+061 result=40 02:18:22 Get A/D value=-858993460 result=40 02:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:18:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:18:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:18:22 Aux= 02:18:22 Message to Camera, serial 206141 queued 02:18:59 Received message from Master: op=PointingHead serial=206154 02:18:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:18:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:19:00 Point started: ret=0 02:19:00 point_skyscan result=0 02:19:00 Check angles 02:19:00 SkyScan query 02:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.255<-23417 Statuses=0009 0009 02:19:01 Msec=0 True Az=112.995 Ze=-171.255 Az status=0009 Ze status=0009 02:19:01 Check angles 02:19:01 SkyScan query 02:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:19:02 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:19:02 Message to Master queued w/err=0: serial=206154 error=0 02:19:07 Received message from Master: op=Filter serial=206155 02:19:07 Color wheel filter change from 0 to 0 02:19:07 FLIGetFilterPos err=0 currentPosition=0 02:19:07 FLIGetStepsRemaining err=0 RemainingSteps=0 02:19:07 Filter is already there-color wheel unchanged 02:19:07 Received message from Master: op=Shutter serial=206156 02:19:07 Shutter LASER open 02:19:07 Received message from Camera: op=State serial=206158 02:19:07 GetSingleValue result=40 Value=cccccccc 02:19:07 SkyScan query 02:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:19:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:08 Parameters OK 02:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:08 Set A/D data flow result=40 02:19:08 Set A/D channel type result=40 02:19:08 Set A/D encoding result=40 02:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:08 Set channel filter=0.000000e+000 result=40 02:19:08 Config A/D Result=40 02:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:08 Get A/D filter: -9.255963e+061 result=40 02:19:08 Get A/D value=-858993460 result=40 02:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:08 Parameters OK 02:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:08 Set A/D data flow result=40 02:19:08 Set A/D channel type result=40 02:19:08 Set A/D encoding result=40 02:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:08 Set channel filter=0.000000e+000 result=40 02:19:08 Config A/D Result=40 02:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:08 Get A/D filter: -9.255963e+061 result=40 02:19:08 Get A/D value=-858993460 result=40 02:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:19:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:19:08 Aux= 02:19:08 Message to Camera, serial 206158 queued 02:19:16 Received message from Master: op=Shutter serial=206168 02:19:16 Shutter LASER close 02:19:17 Received message from Master: op=PointingHead serial=206172 02:19:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:19:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:19:17 Point started: ret=0 02:19:17 point_skyscan result=0 02:19:18 Check angles 02:19:18 SkyScan query 02:19:18 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.19<-21546 Statuses=0009 0009 02:19:18 Msec=0 True Az=136.155 Ze=-143.19 Az status=0009 Ze status=0009 02:19:18 Check angles 02:19:18 SkyScan query 02:19:19 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.77<-20118 Statuses=0009 0009 02:19:19 Msec=750 True Az=154.02 Ze=-121.77 Az status=0009 Ze status=0009 02:19:19 Check angles 02:19:19 SkyScan query 02:19:20 SkyScan query done: ret=0 az=171.87<-11458 ze=-100.305<-18687 Statuses=0009 0009 02:19:20 Msec=1500 True Az=171.87 Ze=-100.305 Az status=0009 Ze status=0009 02:19:20 Check angles 02:19:20 SkyScan query 02:19:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.38<-17292 Statuses=0008 0009 02:19:21 Msec=2250 True Az=175.995 Ze=-79.38 Az status=0008 Ze status=0009 02:19:21 Check angles 02:19:21 SkyScan query 02:19:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.425<-15895 Statuses=0008 0009 02:19:21 Msec=3000 True Az=176.01 Ze=-58.425 Az status=0008 Ze status=0009 02:19:22 Check angles 02:19:22 SkyScan query 02:19:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 02:19:22 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 02:19:22 Message to Master queued w/err=0: serial=206172 error=0 02:19:27 Received message from Master: op=Filter serial=206173 02:19:27 Color wheel filter change from 0 to 0 02:19:27 FLIGetFilterPos err=0 currentPosition=0 02:19:27 FLIGetStepsRemaining err=0 RemainingSteps=0 02:19:27 Filter is already there-color wheel unchanged 02:19:27 Received message from Master: op=Shutter serial=206174 02:19:27 Shutter LASER close 02:19:27 Received message from Camera: op=State serial=206176 02:19:27 GetSingleValue result=40 Value=cccccccc 02:19:27 SkyScan query 02:19:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:19:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:28 Parameters OK 02:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:28 Set A/D data flow result=40 02:19:28 Set A/D channel type result=40 02:19:28 Set A/D encoding result=40 02:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:28 Set channel filter=0.000000e+000 result=40 02:19:28 Config A/D Result=40 02:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:28 Get A/D filter: -9.255963e+061 result=40 02:19:28 Get A/D value=-858993460 result=40 02:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:19:28 Parameters OK 02:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:19:28 Set A/D data flow result=40 02:19:28 Set A/D channel type result=40 02:19:28 Set A/D encoding result=40 02:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:19:28 Set channel filter=0.000000e+000 result=40 02:19:28 Config A/D Result=40 02:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:19:28 Get A/D filter: -9.255963e+061 result=40 02:19:28 Get A/D value=-858993460 result=40 02:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:19:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:19:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:19:28 Aux= 02:19:28 Message to Camera, serial 206176 queued 02:20:05 Received message from Master: op=PointingHead serial=206189 02:20:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:20:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:20:05 Point started: ret=0 02:20:05 point_skyscan result=0 02:20:06 Check angles 02:20:06 SkyScan query 02:20:07 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.705<-13447 Statuses=0009 0009 02:20:07 Msec=0 True Az=152.91 Ze=-21.705 Az status=0009 Ze status=0009 02:20:07 Check angles 02:20:07 SkyScan query 02:20:07 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.3<-12020 Statuses=0009 0009 02:20:07 Msec=750 True Az=135.105 Ze=-0.3 Az status=0009 Ze status=0009 02:20:07 Check angles 02:20:07 SkyScan query 02:20:08 SkyScan query done: ret=0 az=117.54<-7836 ze=20.67<-10622 Statuses=0009 0009 02:20:08 Msec=1500 True Az=117.54 Ze=20.67 Az status=0009 Ze status=0009 02:20:08 Check angles 02:20:08 SkyScan query 02:20:09 SkyScan query done: ret=0 az=99.78<-6652 ze=42.045<-9197 Statuses=0009 0009 02:20:09 Msec=2250 True Az=99.78 Ze=42.045 Az status=0009 Ze status=0009 02:20:09 Check angles 02:20:09 SkyScan query 02:20:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 02:20:10 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 02:20:10 Check angles 02:20:10 SkyScan query 02:20:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:20:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:20:10 Message to Master queued w/err=0: serial=206189 error=0 02:20:15 Received message from Master: op=Filter serial=206190 02:20:15 Color wheel filter change from 0 to 0 02:20:15 FLIGetFilterPos err=0 currentPosition=0 02:20:15 FLIGetStepsRemaining err=0 RemainingSteps=0 02:20:15 Filter is already there-color wheel unchanged 02:20:15 Received message from Master: op=Shutter serial=206191 02:20:15 Shutter LASER close 02:20:16 Received message from Camera: op=State serial=206193 02:20:16 GetSingleValue result=40 Value=cccccccc 02:20:16 SkyScan query 02:20:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:20:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:16 Parameters OK 02:20:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:16 Set A/D data flow result=40 02:20:16 Set A/D channel type result=40 02:20:16 Set A/D encoding result=40 02:20:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:16 Set channel filter=0.000000e+000 result=40 02:20:16 Config A/D Result=40 02:20:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:16 Get A/D filter: -9.255963e+061 result=40 02:20:16 Get A/D value=-858993460 result=40 02:20:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:20:16 Parameters OK 02:20:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:20:16 Set A/D data flow result=40 02:20:16 Set A/D channel type result=40 02:20:16 Set A/D encoding result=40 02:20:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:20:16 Set channel filter=0.000000e+000 result=40 02:20:16 Config A/D Result=40 02:20:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:20:16 Get A/D filter: -9.255963e+061 result=40 02:20:16 Get A/D value=-858993460 result=40 02:20:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:20:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:20:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:20:16 Aux= 02:20:16 Message to Camera, serial 206193 queued 02:20:52 Received message from Master: op=PointingHead serial=206205 02:20:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:20:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:20:52 Point started: ret=0 02:20:52 point_skyscan result=0 02:20:53 Check angles 02:20:53 SkyScan query 02:20:54 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 02:20:54 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 02:20:54 Check angles 02:20:54 SkyScan query 02:20:54 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 02:20:54 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 02:20:55 Check angles 02:20:55 SkyScan query 02:20:55 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 02:20:55 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 02:20:55 Check angles 02:20:55 SkyScan query 02:20:56 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 02:20:56 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 02:20:56 Check angles 02:20:56 SkyScan query 02:20:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 02:20:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 02:20:57 Check angles 02:20:57 SkyScan query 02:20:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:20:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:20:57 Message to Master queued w/err=0: serial=206205 error=0 02:21:02 Received message from Master: op=Filter serial=206206 02:21:02 Color wheel filter change from 0 to 0 02:21:02 FLIGetFilterPos err=0 currentPosition=0 02:21:02 FLIGetStepsRemaining err=0 RemainingSteps=0 02:21:02 Filter is already there-color wheel unchanged 02:21:03 Received message from Master: op=Shutter serial=206207 02:21:03 Shutter LASER close 02:21:03 Received message from Camera: op=State serial=206209 02:21:03 GetSingleValue result=40 Value=cccccccc 02:21:03 SkyScan query 02:21:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:21:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:03 Parameters OK 02:21:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:03 Set A/D data flow result=40 02:21:03 Set A/D channel type result=40 02:21:03 Set A/D encoding result=40 02:21:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:03 Set channel filter=0.000000e+000 result=40 02:21:03 Config A/D Result=40 02:21:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:03 Get A/D filter: -9.255963e+061 result=40 02:21:03 Get A/D value=-858993460 result=40 02:21:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:03 Parameters OK 02:21:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:03 Set A/D data flow result=40 02:21:03 Set A/D channel type result=40 02:21:03 Set A/D encoding result=40 02:21:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:03 Set channel filter=0.000000e+000 result=40 02:21:03 Config A/D Result=40 02:21:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:03 Get A/D filter: -9.255963e+061 result=40 02:21:03 Get A/D value=-858993460 result=40 02:21:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:21:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:21:03 Aux= 02:21:03 Message to Camera, serial 206209 queued 02:21:40 Received message from Master: op=PointingHead serial=206222 02:21:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:21:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:21:40 Point started: ret=0 02:21:40 point_skyscan result=0 02:21:41 Check angles 02:21:41 SkyScan query 02:21:42 SkyScan query done: ret=0 az=153.09<-10206 ze=8.82<-11412 Statuses=0009 0009 02:21:42 Msec=0 True Az=153.09 Ze=8.82 Az status=0009 Ze status=0009 02:21:42 Check angles 02:21:42 SkyScan query 02:21:43 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.24<-12816 Statuses=0009 0009 02:21:43 Msec=750 True Az=135.66 Ze=-12.24 Az status=0009 Ze status=0009 02:21:43 Check angles 02:21:43 SkyScan query 02:21:43 SkyScan query done: ret=0 az=118.14<-7876 ze=-33.075<-14205 Statuses=0009 0009 02:21:43 Msec=1500 True Az=118.14 Ze=-33.075 Az status=0009 Ze status=0009 02:21:43 Check angles 02:21:43 SkyScan query 02:21:44 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.57<-15438 Statuses=0009 0009 02:21:44 Msec=2250 True Az=100.41 Ze=-51.57 Az status=0009 Ze status=0009 02:21:44 Check angles 02:21:44 SkyScan query 02:21:45 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 02:21:45 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 02:21:45 Check angles 02:21:45 SkyScan query 02:21:46 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 02:21:46 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 02:21:46 Message to Master queued w/err=0: serial=206222 error=0 02:21:51 Received message from Master: op=Filter serial=206223 02:21:51 Color wheel filter change from 0 to 0 02:21:51 FLIGetFilterPos err=0 currentPosition=0 02:21:51 FLIGetStepsRemaining err=0 RemainingSteps=0 02:21:51 Filter is already there-color wheel unchanged 02:21:51 Received message from Master: op=Shutter serial=206224 02:21:51 Shutter LASER close 02:21:51 Received message from Camera: op=State serial=206226 02:21:51 GetSingleValue result=40 Value=cccccccc 02:21:51 SkyScan query 02:21:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:21:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:51 Parameters OK 02:21:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:51 Set A/D data flow result=40 02:21:51 Set A/D channel type result=40 02:21:51 Set A/D encoding result=40 02:21:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:51 Set channel filter=0.000000e+000 result=40 02:21:51 Config A/D Result=40 02:21:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:51 Get A/D filter: -9.255963e+061 result=40 02:21:51 Get A/D value=-858993460 result=40 02:21:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:21:51 Parameters OK 02:21:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:21:51 Set A/D data flow result=40 02:21:51 Set A/D channel type result=40 02:21:51 Set A/D encoding result=40 02:21:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:21:51 Set channel filter=0.000000e+000 result=40 02:21:51 Config A/D Result=40 02:21:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:21:51 Get A/D filter: -9.255963e+061 result=40 02:21:51 Get A/D value=-858993460 result=40 02:21:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:21:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:21:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:21:51 Aux= 02:21:51 Message to Camera, serial 206226 queued 02:22:28 Received message from Master: op=PointingHead serial=206239 02:22:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:22:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:22:29 Point started: ret=0 02:22:29 point_skyscan result=0 02:22:29 Check angles 02:22:29 SkyScan query 02:22:30 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.075<-17405 Statuses=0009 0009 02:22:30 Msec=0 True Az=108.84 Ze=-81.075 Az status=0009 Ze status=0009 02:22:30 Check angles 02:22:30 SkyScan query 02:22:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 02:22:31 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 02:22:31 Check angles 02:22:31 SkyScan query 02:22:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 02:22:31 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 02:22:32 Check angles 02:22:32 SkyScan query 02:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.465<-21631 Statuses=0008 0009 02:22:32 Msec=2250 True Az=112.995 Ze=-144.465 Az status=0008 Ze status=0009 02:22:32 Check angles 02:22:32 SkyScan query 02:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 02:22:33 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 02:22:33 Check angles 02:22:33 SkyScan query 02:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:22:34 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:22:34 Message to Master queued w/err=0: serial=206239 error=0 02:22:39 Received message from Master: op=Filter serial=206240 02:22:39 Color wheel filter change from 0 to 0 02:22:39 FLIGetFilterPos err=0 currentPosition=0 02:22:39 FLIGetStepsRemaining err=0 RemainingSteps=0 02:22:39 Filter is already there-color wheel unchanged 02:22:39 Received message from Master: op=Shutter serial=206241 02:22:39 Shutter LASER open 02:22:39 Received message from Camera: op=State serial=206243 02:22:39 GetSingleValue result=40 Value=cccccccc 02:22:39 SkyScan query 02:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:22:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:40 Parameters OK 02:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:40 Set A/D data flow result=40 02:22:40 Set A/D channel type result=40 02:22:40 Set A/D encoding result=40 02:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:40 Set channel filter=0.000000e+000 result=40 02:22:40 Config A/D Result=40 02:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:40 Get A/D filter: -9.255963e+061 result=40 02:22:40 Get A/D value=-858993460 result=40 02:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:22:40 Parameters OK 02:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:22:40 Set A/D data flow result=40 02:22:40 Set A/D channel type result=40 02:22:40 Set A/D encoding result=40 02:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:22:40 Set channel filter=0.000000e+000 result=40 02:22:40 Config A/D Result=40 02:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:22:40 Get A/D filter: -9.255963e+061 result=40 02:22:40 Get A/D value=-858993460 result=40 02:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:22:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:22:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:22:40 Aux= 02:22:40 Message to Camera, serial 206243 queued 02:22:48 Received message from Master: op=Shutter serial=206253 02:22:48 Shutter LASER close 02:22:48 Received message from Master: op=PointingHead serial=206257 02:22:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:22:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:22:49 Point started: ret=0 02:22:49 point_skyscan result=0 02:22:49 Check angles 02:22:49 SkyScan query 02:22:50 SkyScan query done: ret=0 az=89.865<-5991 ze=157.095<-1527 Statuses=0009 0009 02:22:50 Msec=0 True Az=89.865 Ze=157.095 Az status=0009 Ze status=0009 02:22:50 Check angles 02:22:50 SkyScan query 02:22:51 SkyScan query done: ret=0 az=72.03<-4802 ze=135.915<-2939 Statuses=0009 0009 02:22:51 Msec=750 True Az=72.03 Ze=135.915 Az status=0009 Ze status=0009 02:22:51 Check angles 02:22:51 SkyScan query 02:22:52 SkyScan query done: ret=0 az=54.435<-3629 ze=114.435<-4371 Statuses=0009 0009 02:22:52 Msec=1500 True Az=54.435 Ze=114.435 Az status=0009 Ze status=0009 02:22:52 Check angles 02:22:52 SkyScan query 02:22:52 SkyScan query done: ret=0 az=41.01<-2734 ze=93.54<-5764 Statuses=0009 0009 02:22:52 Msec=2250 True Az=41.01 Ze=93.54 Az status=0009 Ze status=0009 02:22:53 Check angles 02:22:53 SkyScan query 02:22:53 SkyScan query done: ret=0 az=40.98<-2732 ze=72.54<-7164 Statuses=0008 0009 02:22:53 Msec=3000 True Az=40.98 Ze=72.54 Az status=0008 Ze status=0009 02:22:53 Check angles 02:22:53 SkyScan query 02:22:54 SkyScan query done: ret=0 az=40.98<-2732 ze=52.32<-8512 Statuses=0008 0009 02:22:54 Msec=3750 True Az=40.98 Ze=52.32 Az status=0008 Ze status=0009 02:22:54 Check angles 02:22:54 SkyScan query 02:22:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:22:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:22:55 Message to Master queued w/err=0: serial=206257 error=0 02:23:00 Received message from Master: op=Filter serial=206258 02:23:00 Color wheel filter change from 0 to 0 02:23:00 FLIGetFilterPos err=0 currentPosition=0 02:23:00 FLIGetStepsRemaining err=0 RemainingSteps=0 02:23:00 Filter is already there-color wheel unchanged 02:23:00 Received message from Master: op=Shutter serial=206259 02:23:00 Shutter LASER close 02:23:00 Received message from Camera: op=State serial=206261 02:23:00 GetSingleValue result=40 Value=cccccccc 02:23:00 SkyScan query 02:23:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:23:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:01 Parameters OK 02:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:01 Set A/D data flow result=40 02:23:01 Set A/D channel type result=40 02:23:01 Set A/D encoding result=40 02:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:01 Set channel filter=0.000000e+000 result=40 02:23:01 Config A/D Result=40 02:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:01 Get A/D filter: -9.255963e+061 result=40 02:23:01 Get A/D value=-858993460 result=40 02:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:01 Parameters OK 02:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:01 Set A/D data flow result=40 02:23:01 Set A/D channel type result=40 02:23:01 Set A/D encoding result=40 02:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:01 Set channel filter=0.000000e+000 result=40 02:23:01 Config A/D Result=40 02:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:01 Get A/D filter: -9.255963e+061 result=40 02:23:01 Get A/D value=-858993460 result=40 02:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:23:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:23:01 Aux= 02:23:01 Message to Camera, serial 206261 queued 02:23:37 Received message from Master: op=PointingHead serial=206274 02:23:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:23:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:23:38 Point started: ret=0 02:23:38 point_skyscan result=0 02:23:39 Check angles 02:23:39 SkyScan query 02:23:39 SkyScan query done: ret=0 az=40.995<-2733 ze=21.585<-10561 Statuses=0008 0009 02:23:39 Msec=0 True Az=40.995 Ze=21.585 Az status=0008 Ze status=0009 02:23:39 Check angles 02:23:39 SkyScan query 02:23:40 SkyScan query done: ret=0 az=40.995<-2733 ze=0.6<-11960 Statuses=0008 0009 02:23:40 Msec=750 True Az=40.995 Ze=0.6 Az status=0008 Ze status=0009 02:23:40 Check angles 02:23:40 SkyScan query 02:23:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.82<-13388 Statuses=0008 0009 02:23:41 Msec=1500 True Az=40.995 Ze=-20.82 Az status=0008 Ze status=0009 02:23:41 Check angles 02:23:41 SkyScan query 02:23:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 02:23:41 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 02:23:42 Check angles 02:23:42 SkyScan query 02:23:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:23:42 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:23:42 Message to Master queued w/err=0: serial=206274 error=0 02:23:47 Received message from Master: op=Filter serial=206275 02:23:47 Color wheel filter change from 0 to 0 02:23:47 FLIGetFilterPos err=0 currentPosition=0 02:23:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:23:47 Filter is already there-color wheel unchanged 02:23:47 Received message from Master: op=Shutter serial=206276 02:23:47 Shutter LASER close 02:23:47 Received message from Camera: op=State serial=206278 02:23:47 GetSingleValue result=40 Value=cccccccc 02:23:47 SkyScan query 02:23:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:23:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:48 Parameters OK 02:23:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:48 Set A/D data flow result=40 02:23:48 Set A/D channel type result=40 02:23:48 Set A/D encoding result=40 02:23:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:48 Set channel filter=0.000000e+000 result=40 02:23:48 Config A/D Result=40 02:23:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:48 Get A/D filter: -9.255963e+061 result=40 02:23:48 Get A/D value=-858993460 result=40 02:23:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:23:48 Parameters OK 02:23:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:23:48 Set A/D data flow result=40 02:23:48 Set A/D channel type result=40 02:23:48 Set A/D encoding result=40 02:23:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:23:48 Set channel filter=0.000000e+000 result=40 02:23:48 Config A/D Result=40 02:23:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:23:48 Get A/D filter: -9.255963e+061 result=40 02:23:48 Get A/D value=-858993460 result=40 02:23:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:23:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:23:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:23:48 Aux= 02:23:48 Message to Camera, serial 206278 queued 02:24:25 Received message from Master: op=PointingHead serial=206291 02:24:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:24:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:24:25 Point started: ret=0 02:24:25 point_skyscan result=0 02:24:26 Check angles 02:24:26 SkyScan query 02:24:26 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.055<-16537 Statuses=0009 0009 02:24:26 Msec=0 True Az=63.78 Ze=-68.055 Az status=0009 Ze status=0009 02:24:27 Check angles 02:24:27 SkyScan query 02:24:27 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.475<-17965 Statuses=0009 0009 02:24:27 Msec=750 True Az=81.615 Ze=-89.475 Az status=0009 Ze status=0009 02:24:27 Check angles 02:24:27 SkyScan query 02:24:28 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.46<-19364 Statuses=0009 0009 02:24:28 Msec=1500 True Az=99.165 Ze=-110.46 Az status=0009 Ze status=0009 02:24:28 Check angles 02:24:28 SkyScan query 02:24:29 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.37<-20758 Statuses=0009 0009 02:24:29 Msec=2250 True Az=116.535 Ze=-131.37 Az status=0009 Ze status=0009 02:24:29 Check angles 02:24:29 SkyScan query 02:24:29 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 02:24:29 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 02:24:30 Check angles 02:24:30 SkyScan query 02:24:30 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:24:30 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:24:30 Message to Master queued w/err=0: serial=206291 error=0 02:24:35 Received message from Master: op=Filter serial=206292 02:24:35 Color wheel filter change from 0 to 0 02:24:35 FLIGetFilterPos err=0 currentPosition=0 02:24:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:24:35 Filter is already there-color wheel unchanged 02:24:35 Received message from Master: op=Shutter serial=206293 02:24:35 Shutter LASER close 02:24:35 Received message from Camera: op=State serial=206295 02:24:35 GetSingleValue result=40 Value=cccccccc 02:24:35 SkyScan query 02:24:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:24:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:36 Parameters OK 02:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:36 Set A/D data flow result=40 02:24:36 Set A/D channel type result=40 02:24:36 Set A/D encoding result=40 02:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:36 Set channel filter=0.000000e+000 result=40 02:24:36 Config A/D Result=40 02:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:36 Get A/D filter: -9.255963e+061 result=40 02:24:36 Get A/D value=-858993460 result=40 02:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:24:36 Parameters OK 02:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:24:36 Set A/D data flow result=40 02:24:36 Set A/D channel type result=40 02:24:36 Set A/D encoding result=40 02:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:24:36 Set channel filter=0.000000e+000 result=40 02:24:36 Config A/D Result=40 02:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:24:36 Get A/D filter: -9.255963e+061 result=40 02:24:36 Get A/D value=-858993460 result=40 02:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:24:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:24:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:24:36 Aux= 02:24:36 Message to Camera, serial 206295 queued 02:25:13 Received message from Master: op=PointingHead serial=206308 02:25:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:25:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:25:13 Point started: ret=0 02:25:13 point_skyscan result=0 02:25:14 Check angles 02:25:14 SkyScan query 02:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 02:25:15 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 02:25:15 Check angles 02:25:15 SkyScan query 02:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:25:15 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:25:15 Message to Master queued w/err=0: serial=206308 error=0 02:25:20 Received message from Master: op=Filter serial=206309 02:25:20 Color wheel filter change from 0 to 0 02:25:20 FLIGetFilterPos err=0 currentPosition=0 02:25:20 FLIGetStepsRemaining err=0 RemainingSteps=0 02:25:20 Filter is already there-color wheel unchanged 02:25:21 Received message from Master: op=Shutter serial=206310 02:25:21 Shutter LASER open 02:25:21 Received message from Camera: op=State serial=206312 02:25:21 GetSingleValue result=40 Value=cccccccc 02:25:21 SkyScan query 02:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:25:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:21 Parameters OK 02:25:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:21 Set A/D data flow result=40 02:25:21 Set A/D channel type result=40 02:25:21 Set A/D encoding result=40 02:25:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:21 Set channel filter=0.000000e+000 result=40 02:25:21 Config A/D Result=40 02:25:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:21 Get A/D filter: -9.255963e+061 result=40 02:25:21 Get A/D value=-858993460 result=40 02:25:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:21 Parameters OK 02:25:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:21 Set A/D data flow result=40 02:25:21 Set A/D channel type result=40 02:25:21 Set A/D encoding result=40 02:25:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:21 Set channel filter=0.000000e+000 result=40 02:25:21 Config A/D Result=40 02:25:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:21 Get A/D filter: -9.255963e+061 result=40 02:25:21 Get A/D value=-858993460 result=40 02:25:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:25:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:25:21 Aux= 02:25:21 Message to Camera, serial 206312 queued 02:25:30 Received message from Master: op=Shutter serial=206322 02:25:30 Shutter LASER close 02:25:30 Received message from Master: op=PointingHead serial=206326 02:25:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:25:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:25:31 Point started: ret=0 02:25:31 point_skyscan result=0 02:25:31 Check angles 02:25:31 SkyScan query 02:25:32 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.49<-21566 Statuses=0009 0009 02:25:32 Msec=0 True Az=135.75 Ze=-143.49 Az status=0009 Ze status=0009 02:25:32 Check angles 02:25:32 SkyScan query 02:25:33 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.445<-20163 Statuses=0009 0009 02:25:33 Msec=750 True Az=153.3 Ze=-122.445 Az status=0009 Ze status=0009 02:25:33 Check angles 02:25:33 SkyScan query 02:25:34 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.64<-18776 Statuses=0009 0009 02:25:34 Msec=1500 True Az=170.775 Ze=-101.64 Az status=0009 Ze status=0009 02:25:34 Check angles 02:25:34 SkyScan query 02:25:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.565<-17371 Statuses=0008 0009 02:25:34 Msec=2250 True Az=176.01 Ze=-80.565 Az status=0008 Ze status=0009 02:25:34 Check angles 02:25:34 SkyScan query 02:25:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.64<-15976 Statuses=0008 0009 02:25:35 Msec=3000 True Az=175.995 Ze=-59.64 Az status=0008 Ze status=0009 02:25:35 Check angles 02:25:35 SkyScan query 02:25:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:25:36 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 [UTC 2018-12-17 02:25:36] 02:25:36 Message to Master queued w/err=0: serial=206326 error=0 02:25:41 Received message from Master: op=Filter serial=206327 02:25:41 Color wheel filter change from 0 to 0 02:25:41 FLIGetFilterPos err=0 currentPosition=0 02:25:41 FLIGetStepsRemaining err=0 RemainingSteps=0 02:25:41 Filter is already there-color wheel unchanged 02:25:41 Received message from Master: op=Shutter serial=206328 02:25:41 Shutter LASER close 02:25:41 Received message from Camera: op=State serial=206330 02:25:41 GetSingleValue result=40 Value=cccccccc 02:25:41 SkyScan query 02:25:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:25:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:42 Parameters OK 02:25:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:42 Set A/D data flow result=40 02:25:42 Set A/D channel type result=40 02:25:42 Set A/D encoding result=40 02:25:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:42 Set channel filter=0.000000e+000 result=40 02:25:42 Config A/D Result=40 02:25:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:42 Get A/D filter: -9.255963e+061 result=40 02:25:42 Get A/D value=-858993460 result=40 02:25:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:25:42 Parameters OK 02:25:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:25:42 Set A/D data flow result=40 02:25:42 Set A/D channel type result=40 02:25:42 Set A/D encoding result=40 02:25:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:25:42 Set channel filter=0.000000e+000 result=40 02:25:42 Config A/D Result=40 02:25:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:25:42 Get A/D filter: -9.255963e+061 result=40 02:25:42 Get A/D value=-858993460 result=40 02:25:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:25:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:25:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:25:42 Aux= 02:25:42 Message to Camera, serial 206330 queued 02:26:19 Received message from Master: op=PointingHead serial=206343 02:26:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:26:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:26:19 Point started: ret=0 02:26:19 point_skyscan result=0 02:26:20 Check angles 02:26:20 SkyScan query 02:26:20 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.99<-13466 Statuses=0009 0009 02:26:20 Msec=0 True Az=153.18 Ze=-21.99 Az status=0009 Ze status=0009 02:26:20 Check angles 02:26:20 SkyScan query 02:26:21 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.54<-12036 Statuses=0009 0009 02:26:21 Msec=750 True Az=135.375 Ze=-0.54 Az status=0009 Ze status=0009 02:26:21 Check angles 02:26:21 SkyScan query 02:26:22 SkyScan query done: ret=0 az=117.795<-7853 ze=20.415<-10639 Statuses=0009 0009 02:26:22 Msec=1500 True Az=117.795 Ze=20.415 Az status=0009 Ze status=0009 02:26:22 Check angles 02:26:22 SkyScan query 02:26:22 SkyScan query done: ret=0 az=100.365<-6691 ze=41.385<-9241 Statuses=0009 0009 02:26:22 Msec=2250 True Az=100.365 Ze=41.385 Az status=0009 Ze status=0009 02:26:23 Check angles 02:26:23 SkyScan query 02:26:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 02:26:23 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 02:26:23 Check angles 02:26:23 SkyScan query 02:26:24 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 02:26:24 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 02:26:24 Message to Master queued w/err=0: serial=206343 error=0 02:26:29 Received message from Master: op=Filter serial=206344 02:26:29 Color wheel filter change from 0 to 0 02:26:29 FLIGetFilterPos err=0 currentPosition=0 02:26:29 FLIGetStepsRemaining err=0 RemainingSteps=0 02:26:29 Filter is already there-color wheel unchanged 02:26:29 Received message from Master: op=Shutter serial=206345 02:26:29 Shutter LASER close 02:26:29 Received message from Camera: op=State serial=206347 02:26:29 GetSingleValue result=40 Value=cccccccc 02:26:29 SkyScan query 02:26:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:26:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:30 Parameters OK 02:26:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:30 Set A/D data flow result=40 02:26:30 Set A/D channel type result=40 02:26:30 Set A/D encoding result=40 02:26:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:30 Set channel filter=0.000000e+000 result=40 02:26:30 Config A/D Result=40 02:26:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:30 Get A/D filter: -9.255963e+061 result=40 02:26:30 Get A/D value=-858993460 result=40 02:26:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:26:30 Parameters OK 02:26:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:26:30 Set A/D data flow result=40 02:26:30 Set A/D channel type result=40 02:26:30 Set A/D encoding result=40 02:26:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:26:30 Set channel filter=0.000000e+000 result=40 02:26:30 Config A/D Result=40 02:26:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:26:30 Get A/D filter: -9.255963e+061 result=40 02:26:30 Get A/D value=-858993460 result=40 02:26:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:26:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:26:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:26:30 Aux= 02:26:30 Message to Camera, serial 206347 queued 02:27:07 Received message from Master: op=PointingHead serial=206360 02:27:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:27:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:27:07 Point started: ret=0 02:27:07 point_skyscan result=0 02:27:08 Check angles 02:27:08 SkyScan query 02:27:08 SkyScan query done: ret=0 az=109.35<-7290 ze=38.49<-9434 Statuses=0009 0008 02:27:08 Msec=0 True Az=109.35 Ze=38.49 Az status=0009 Ze status=0008 02:27:08 Check angles 02:27:08 SkyScan query 02:27:09 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 02:27:09 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 02:27:09 Check angles 02:27:09 SkyScan query 02:27:10 SkyScan query done: ret=0 az=144.36<-9624 ze=38.505<-9433 Statuses=0009 0008 02:27:10 Msec=1500 True Az=144.36 Ze=38.505 Az status=0009 Ze status=0008 02:27:10 Check angles 02:27:10 SkyScan query 02:27:11 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 02:27:11 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 02:27:11 Check angles 02:27:11 SkyScan query 02:27:11 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 02:27:11 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 02:27:11 Check angles 02:27:11 SkyScan query 02:27:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:27:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:27:12 Message to Master queued w/err=0: serial=206360 error=0 02:27:17 Received message from Master: op=Filter serial=206361 02:27:17 Color wheel filter change from 0 to 0 02:27:17 FLIGetFilterPos err=0 currentPosition=0 02:27:17 FLIGetStepsRemaining err=0 RemainingSteps=0 02:27:17 Filter is already there-color wheel unchanged 02:27:17 Received message from Master: op=Shutter serial=206362 02:27:17 Shutter LASER close 02:27:17 Received message from Camera: op=State serial=206364 02:27:17 GetSingleValue result=40 Value=cccccccc 02:27:17 SkyScan query 02:27:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:27:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:18 Parameters OK 02:27:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:18 Set A/D data flow result=40 02:27:18 Set A/D channel type result=40 02:27:18 Set A/D encoding result=40 02:27:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:18 Set channel filter=0.000000e+000 result=40 02:27:18 Config A/D Result=40 02:27:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:18 Get A/D filter: -9.255963e+061 result=40 02:27:18 Get A/D value=-858993460 result=40 02:27:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:27:18 Parameters OK 02:27:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:27:18 Set A/D data flow result=40 02:27:18 Set A/D channel type result=40 02:27:18 Set A/D encoding result=40 02:27:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:27:18 Set channel filter=0.000000e+000 result=40 02:27:18 Config A/D Result=40 02:27:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:27:18 Get A/D filter: -9.255963e+061 result=40 02:27:18 Get A/D value=-858993460 result=40 02:27:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:27:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:27:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:27:18 Aux= 02:27:18 Message to Camera, serial 206364 queued 02:27:55 Received message from Master: op=PointingHead serial=206377 02:27:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:27:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:27:55 Point started: ret=0 02:27:55 point_skyscan result=0 02:27:56 Check angles 02:27:56 SkyScan query 02:27:56 SkyScan query done: ret=0 az=152.85<-10190 ze=8.73<-11418 Statuses=0009 0009 02:27:56 Msec=0 True Az=152.85 Ze=8.73 Az status=0009 Ze status=0009 02:27:57 Check angles 02:27:57 SkyScan query 02:27:57 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.315<-12821 Statuses=0009 0009 02:27:57 Msec=750 True Az=135.36 Ze=-12.315 Az status=0009 Ze status=0009 02:27:57 Check angles 02:27:57 SkyScan query 02:27:58 SkyScan query done: ret=0 az=117.9<-7860 ze=-33.165<-14211 Statuses=0009 0009 02:27:58 Msec=1500 True Az=117.9 Ze=-33.165 Az status=0009 Ze status=0009 02:27:58 Check angles 02:27:58 SkyScan query 02:27:59 SkyScan query done: ret=0 az=100.545<-6703 ze=-51.54<-15436 Statuses=0009 0009 02:27:59 Msec=2250 True Az=100.545 Ze=-51.54 Az status=0009 Ze status=0009 02:27:59 Check angles 02:27:59 SkyScan query 02:27:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 02:27:59 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 02:28:00 Check angles 02:28:00 SkyScan query 02:28:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:28:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:28:00 Message to Master queued w/err=0: serial=206377 error=0 02:28:05 Received message from Master: op=Filter serial=206378 02:28:05 Color wheel filter change from 0 to 0 02:28:05 FLIGetFilterPos err=0 currentPosition=0 02:28:05 FLIGetStepsRemaining err=0 RemainingSteps=0 02:28:05 Filter is already there-color wheel unchanged 02:28:05 Received message from Master: op=Shutter serial=206379 02:28:05 Shutter LASER close 02:28:05 Received message from Camera: op=State serial=206381 02:28:05 GetSingleValue result=40 Value=cccccccc 02:28:05 SkyScan query 02:28:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:28:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:06 Parameters OK 02:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:06 Set A/D data flow result=40 02:28:06 Set A/D channel type result=40 02:28:06 Set A/D encoding result=40 02:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:06 Set channel filter=0.000000e+000 result=40 02:28:06 Config A/D Result=40 02:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:06 Get A/D filter: -9.255963e+061 result=40 02:28:06 Get A/D value=-858993460 result=40 02:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:06 Parameters OK 02:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:06 Set A/D data flow result=40 02:28:06 Set A/D channel type result=40 02:28:06 Set A/D encoding result=40 02:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:06 Set channel filter=0.000000e+000 result=40 02:28:06 Config A/D Result=40 02:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:06 Get A/D filter: -9.255963e+061 result=40 02:28:06 Get A/D value=-858993460 result=40 02:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:28:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:28:06 Aux= 02:28:06 Message to Camera, serial 206381 queued 02:28:43 Received message from Master: op=PointingHead serial=206394 02:28:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:28:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:28:43 Point started: ret=0 02:28:43 point_skyscan result=0 02:28:44 Check angles 02:28:44 SkyScan query 02:28:44 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.105<-17407 Statuses=0009 0009 02:28:44 Msec=0 True Az=108.915 Ze=-81.105 Az status=0009 Ze status=0009 02:28:45 Check angles 02:28:45 SkyScan query 02:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 02:28:45 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 02:28:45 Check angles 02:28:45 SkyScan query 02:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.015<-20201 Statuses=0008 0009 02:28:46 Msec=1500 True Az=112.995 Ze=-123.015 Az status=0008 Ze status=0009 02:28:46 Check angles 02:28:46 SkyScan query 02:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 02:28:47 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 02:28:47 Check angles 02:28:47 SkyScan query 02:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 02:28:47 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 02:28:48 Check angles 02:28:48 SkyScan query 02:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:28:48 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:28:48 Message to Master queued w/err=0: serial=206394 error=0 02:28:53 Received message from Master: op=Filter serial=206395 02:28:53 Color wheel filter change from 0 to 0 02:28:53 FLIGetFilterPos err=0 currentPosition=0 02:28:53 FLIGetStepsRemaining err=0 RemainingSteps=0 02:28:53 Filter is already there-color wheel unchanged 02:28:53 Received message from Master: op=Shutter serial=206396 02:28:53 Shutter LASER open 02:28:54 Received message from Camera: op=State serial=206398 02:28:54 GetSingleValue result=40 Value=cccccccc 02:28:54 SkyScan query 02:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:28:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:54 Parameters OK 02:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:54 Set A/D data flow result=40 02:28:54 Set A/D channel type result=40 02:28:54 Set A/D encoding result=40 02:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:54 Set channel filter=0.000000e+000 result=40 02:28:54 Config A/D Result=40 02:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:54 Get A/D filter: -9.255963e+061 result=40 02:28:54 Get A/D value=-858993460 result=40 02:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:28:54 Parameters OK 02:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:28:54 Set A/D data flow result=40 02:28:54 Set A/D channel type result=40 02:28:54 Set A/D encoding result=40 02:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:28:54 Set channel filter=0.000000e+000 result=40 02:28:54 Config A/D Result=40 02:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:28:54 Get A/D filter: -9.255963e+061 result=40 02:28:54 Get A/D value=-858993460 result=40 02:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:28:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:28:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:28:54 Aux= 02:28:54 Message to Camera, serial 206398 queued 02:29:03 Received message from Master: op=Shutter serial=206408 02:29:03 Shutter LASER close 02:29:03 Received message from Master: op=PointingHead serial=206412 02:29:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:29:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:29:03 Point started: ret=0 02:29:03 point_skyscan result=0 02:29:04 Check angles 02:29:04 SkyScan query 02:29:05 SkyScan query done: ret=0 az=90.15<-6010 ze=157.47<-1502 Statuses=0009 0009 02:29:05 Msec=0 True Az=90.15 Ze=157.47 Az status=0009 Ze status=0009 02:29:05 Check angles 02:29:05 SkyScan query 02:29:05 SkyScan query done: ret=0 az=72.57<-4838 ze=136.5<-2900 Statuses=0009 0009 02:29:05 Msec=750 True Az=72.57 Ze=136.5 Az status=0009 Ze status=0009 02:29:06 Check angles 02:29:06 SkyScan query 02:29:06 SkyScan query done: ret=0 az=55.29<-3686 ze=115.605<-4293 Statuses=0009 0009 02:29:06 Msec=1500 True Az=55.29 Ze=115.605 Az status=0009 Ze status=0009 02:29:06 Check angles 02:29:06 SkyScan query 02:29:07 SkyScan query done: ret=0 az=40.98<-2732 ze=94.59<-5694 Statuses=0009 0009 02:29:07 Msec=2250 True Az=40.98 Ze=94.59 Az status=0009 Ze status=0009 02:29:07 Check angles 02:29:07 SkyScan query 02:29:08 SkyScan query done: ret=0 az=40.995<-2733 ze=73.665<-7089 Statuses=0008 0009 02:29:08 Msec=3000 True Az=40.995 Ze=73.665 Az status=0008 Ze status=0009 02:29:08 Check angles 02:29:08 SkyScan query 02:29:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.995<-8467 Statuses=0008 0009 02:29:08 Msec=3750 True Az=40.995 Ze=52.995 Az status=0008 Ze status=0009 02:29:09 Check angles 02:29:09 SkyScan query 02:29:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:29:09 Msec=4500 True Az=40.995 Ze=51.495 Az status=0008 Ze status=0008 02:29:09 Message to Master queued w/err=0: serial=206412 error=0 02:29:14 Received message from Master: op=Filter serial=206413 02:29:14 Color wheel filter change from 0 to 0 02:29:14 FLIGetFilterPos err=0 currentPosition=0 02:29:14 FLIGetStepsRemaining err=0 RemainingSteps=0 02:29:14 Filter is already there-color wheel unchanged 02:29:14 Received message from Master: op=Shutter serial=206414 02:29:14 Shutter LASER close 02:29:14 Received message from Camera: op=State serial=206416 02:29:14 GetSingleValue result=40 Value=cccccccc 02:29:14 SkyScan query 02:29:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.51<-8566 Statuses=0008 0008 02:29:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:15 Parameters OK 02:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:15 Set A/D data flow result=40 02:29:15 Set A/D channel type result=40 02:29:15 Set A/D encoding result=40 02:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:15 Set channel filter=0.000000e+000 result=40 02:29:15 Config A/D Result=40 02:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:15 Get A/D filter: -9.255963e+061 result=40 02:29:15 Get A/D value=-858993460 result=40 02:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:29:15 Parameters OK 02:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:29:15 Set A/D data flow result=40 02:29:15 Set A/D channel type result=40 02:29:15 Set A/D encoding result=40 02:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:29:15 Set channel filter=0.000000e+000 result=40 02:29:15 Config A/D Result=40 02:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:29:15 Get A/D filter: -9.255963e+061 result=40 02:29:15 Get A/D value=-858993460 result=40 02:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:29:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.509998 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:29:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:29:15 Aux= 02:29:15 Message to Camera, serial 206416 queued 02:29:52 Received message from Master: op=PointingHead serial=206429 02:29:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:29:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:29:52 Point started: ret=0 02:29:52 point_skyscan result=0 02:29:53 Check angles 02:29:53 SkyScan query 02:29:54 SkyScan query done: ret=0 az=40.995<-2733 ze=21.27<-10582 Statuses=0008 0009 02:29:54 Msec=0 True Az=40.995 Ze=21.27 Az status=0008 Ze status=0009 02:29:54 Check angles 02:29:54 SkyScan query 02:29:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.165<-12011 Statuses=0008 0009 02:29:55 Msec=750 True Az=40.995 Ze=-0.165 Az status=0008 Ze status=0009 02:29:55 Check angles 02:29:55 SkyScan query 02:29:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.135<-13409 Statuses=0008 0009 02:29:55 Msec=1500 True Az=40.995 Ze=-21.135 Az status=0008 Ze status=0009 02:29:55 Check angles 02:29:55 SkyScan query 02:29:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 02:29:56 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 02:29:56 Check angles 02:29:56 SkyScan query 02:29:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:29:57 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:29:57 Message to Master queued w/err=0: serial=206429 error=0 02:30:02 Received message from Master: op=Filter serial=206430 02:30:02 Color wheel filter change from 0 to 0 02:30:02 FLIGetFilterPos err=0 currentPosition=0 02:30:02 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:02 Filter is already there-color wheel unchanged 02:30:02 Received message from Master: op=Shutter serial=206431 02:30:02 Shutter LASER close 02:30:02 Received message from Camera: op=State serial=206433 02:30:02 GetSingleValue result=40 Value=cccccccc 02:30:02 SkyScan query 02:30:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:30:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:03 Parameters OK 02:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:03 Set A/D data flow result=40 02:30:03 Set A/D channel type result=40 02:30:03 Set A/D encoding result=40 02:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:03 Set channel filter=0.000000e+000 result=40 02:30:03 Config A/D Result=40 02:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:03 Get A/D filter: -9.255963e+061 result=40 02:30:03 Get A/D value=-858993460 result=40 02:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:03 Parameters OK 02:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:03 Set A/D data flow result=40 02:30:03 Set A/D channel type result=40 02:30:03 Set A/D encoding result=40 02:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:03 Set channel filter=0.000000e+000 result=40 02:30:03 Config A/D Result=40 02:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:03 Get A/D filter: -9.255963e+061 result=40 02:30:03 Get A/D value=-858993460 result=40 02:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:03 Aux= 02:30:03 Message to Camera, serial 206433 queued 02:30:39 Received message from Master: op=PointingHead serial=206446 02:30:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:30:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:30:40 Point started: ret=0 02:30:40 point_skyscan result=0 02:30:41 Check angles 02:30:41 SkyScan query 02:30:41 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.115<-16541 Statuses=0009 0009 02:30:41 Msec=0 True Az=63.84 Ze=-68.115 Az status=0009 Ze status=0009 02:30:41 Check angles 02:30:41 SkyScan query 02:30:42 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.52<-17968 Statuses=0009 0009 02:30:42 Msec=750 True Az=81.6 Ze=-89.52 Az status=0009 Ze status=0009 02:30:42 Check angles 02:30:42 SkyScan query 02:30:43 SkyScan query done: ret=0 az=99.105<-6607 ze=-110.49<-19366 Statuses=0009 0009 02:30:43 Msec=1500 True Az=99.105 Ze=-110.49 Az status=0009 Ze status=0009 02:30:43 Check angles 02:30:43 SkyScan query 02:30:43 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.415<-20761 Statuses=0009 0009 02:30:43 Msec=2250 True Az=116.64 Ze=-131.415 Az status=0009 Ze status=0009 02:30:44 Check angles 02:30:44 SkyScan query 02:30:44 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 02:30:44 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 02:30:44 Check angles 02:30:44 SkyScan query 02:30:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:30:45 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:30:45 Message to Master queued w/err=0: serial=206446 error=0 02:30:50 Received message from Master: op=Filter serial=206447 02:30:50 Color wheel filter change from 0 to 0 02:30:50 FLIGetFilterPos err=0 currentPosition=0 02:30:50 FLIGetStepsRemaining err=0 RemainingSteps=0 02:30:50 Filter is already there-color wheel unchanged 02:30:50 Received message from Master: op=Shutter serial=206448 02:30:50 Shutter LASER close 02:30:50 Received message from Camera: op=State serial=206450 02:30:50 GetSingleValue result=40 Value=cccccccc 02:30:50 SkyScan query 02:30:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:30:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:51 Parameters OK 02:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:51 Set A/D data flow result=40 02:30:51 Set A/D channel type result=40 02:30:51 Set A/D encoding result=40 02:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:51 Set channel filter=0.000000e+000 result=40 02:30:51 Config A/D Result=40 02:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:51 Get A/D filter: -9.255963e+061 result=40 02:30:51 Get A/D value=-858993460 result=40 02:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:30:51 Parameters OK 02:30:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:30:51 Set A/D data flow result=40 02:30:51 Set A/D channel type result=40 02:30:51 Set A/D encoding result=40 02:30:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:30:51 Set channel filter=0.000000e+000 result=40 02:30:51 Config A/D Result=40 02:30:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:30:51 Get A/D filter: -9.255963e+061 result=40 02:30:51 Get A/D value=-858993460 result=40 02:30:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:30:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:30:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:30:51 Aux= 02:30:51 Message to Camera, serial 206450 queued 02:31:27 Received message from Master: op=PointingHead serial=206463 02:31:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:31:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:31:28 Point started: ret=0 02:31:28 point_skyscan result=0 02:31:29 Check angles 02:31:29 SkyScan query 02:31:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.285<-23419 Statuses=0009 0009 02:31:29 Msec=0 True Az=112.995 Ze=-171.285 Az status=0009 Ze status=0009 02:31:29 Check angles 02:31:29 SkyScan query 02:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:31:30 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:31:30 Message to Master queued w/err=0: serial=206463 error=0 02:31:35 Received message from Master: op=Filter serial=206464 02:31:35 Color wheel filter change from 0 to 0 02:31:35 FLIGetFilterPos err=0 currentPosition=0 02:31:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:31:35 Filter is already there-color wheel unchanged 02:31:35 Received message from Master: op=Shutter serial=206465 02:31:35 Shutter LASER open 02:31:35 Received message from Camera: op=State serial=206467 02:31:35 GetSingleValue result=40 Value=cccccccc 02:31:35 SkyScan query 02:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:31:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:36 Parameters OK 02:31:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:36 Set A/D data flow result=40 02:31:36 Set A/D channel type result=40 02:31:36 Set A/D encoding result=40 02:31:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:36 Set channel filter=0.000000e+000 result=40 02:31:36 Config A/D Result=40 02:31:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:36 Get A/D filter: -9.255963e+061 result=40 02:31:36 Get A/D value=-858993460 result=40 02:31:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:36 Parameters OK 02:31:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:36 Set A/D data flow result=40 02:31:36 Set A/D channel type result=40 02:31:36 Set A/D encoding result=40 02:31:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:36 Set channel filter=0.000000e+000 result=40 02:31:36 Config A/D Result=40 02:31:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:36 Get A/D filter: -9.255963e+061 result=40 02:31:36 Get A/D value=-858993460 result=40 02:31:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:31:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:31:36 Aux= 02:31:36 Message to Camera, serial 206467 queued 02:31:44 Received message from Master: op=Shutter serial=206477 02:31:44 Shutter LASER close 02:31:45 Received message from Master: op=PointingHead serial=206481 02:31:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:31:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:31:45 Point started: ret=0 02:31:45 point_skyscan result=0 02:31:46 Check angles 02:31:46 SkyScan query 02:31:47 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.16<-21544 Statuses=0009 0009 02:31:47 Msec=0 True Az=136.02 Ze=-143.16 Az status=0009 Ze status=0009 02:31:47 Check angles 02:31:47 SkyScan query 02:31:47 SkyScan query done: ret=0 az=153.99<-10266 ze=-121.725<-20115 Statuses=0009 0009 02:31:47 Msec=750 True Az=153.99 Ze=-121.725 Az status=0009 Ze status=0009 02:31:47 Check angles 02:31:47 SkyScan query 02:31:48 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.71<-18714 Statuses=0009 0009 02:31:48 Msec=1500 True Az=171.465 Ze=-100.71 Az status=0009 Ze status=0009 02:31:48 Check angles 02:31:48 SkyScan query 02:31:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.35<-17290 Statuses=0008 0009 02:31:49 Msec=2250 True Az=175.995 Ze=-79.35 Az status=0008 Ze status=0009 02:31:49 Check angles 02:31:49 SkyScan query 02:31:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.395<-15893 Statuses=0008 0009 02:31:50 Msec=3000 True Az=176.01 Ze=-58.395 Az status=0008 Ze status=0009 02:31:50 Check angles 02:31:50 SkyScan query 02:31:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 02:31:50 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 02:31:50 Message to Master queued w/err=0: serial=206481 error=0 02:31:55 Received message from Master: op=Filter serial=206482 02:31:55 Color wheel filter change from 0 to 0 02:31:55 FLIGetFilterPos err=0 currentPosition=0 02:31:55 FLIGetStepsRemaining err=0 RemainingSteps=0 02:31:55 Filter is already there-color wheel unchanged 02:31:55 Received message from Master: op=Shutter serial=206483 02:31:55 Shutter LASER close 02:31:56 Received message from Camera: op=State serial=206485 02:31:56 GetSingleValue result=40 Value=cccccccc 02:31:56 SkyScan query 02:31:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:31:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:56 Parameters OK 02:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:56 Set A/D data flow result=40 02:31:56 Set A/D channel type result=40 02:31:56 Set A/D encoding result=40 02:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:56 Set channel filter=0.000000e+000 result=40 02:31:56 Config A/D Result=40 02:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:56 Get A/D filter: -9.255963e+061 result=40 02:31:56 Get A/D value=-858993460 result=40 02:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:31:56 Parameters OK 02:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:31:56 Set A/D data flow result=40 02:31:56 Set A/D channel type result=40 02:31:56 Set A/D encoding result=40 02:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:31:56 Set channel filter=0.000000e+000 result=40 02:31:56 Config A/D Result=40 02:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:31:56 Get A/D filter: -9.255963e+061 result=40 02:31:56 Get A/D value=-858993460 result=40 02:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:31:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:31:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:31:56 Aux= 02:31:56 Message to Camera, serial 206485 queued 02:32:33 Received message from Master: op=PointingHead serial=206498 02:32:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:32:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:32:33 Point started: ret=0 02:32:33 point_skyscan result=0 02:32:34 Check angles 02:32:34 SkyScan query 02:32:35 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.465<-13431 Statuses=0009 0009 02:32:35 Msec=0 True Az=152.775 Ze=-21.465 Az status=0009 Ze status=0009 02:32:35 Check angles 02:32:35 SkyScan query 02:32:35 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.525<-12035 Statuses=0009 0009 02:32:35 Msec=750 True Az=135.345 Ze=-0.525 Az status=0009 Ze status=0009 02:32:36 Check angles 02:32:36 SkyScan query 02:32:36 SkyScan query done: ret=0 az=117.39<-7826 ze=20.955<-10603 Statuses=0009 0009 02:32:36 Msec=1500 True Az=117.39 Ze=20.955 Az status=0009 Ze status=0009 02:32:36 Check angles 02:32:36 SkyScan query 02:32:37 SkyScan query done: ret=0 az=99.675<-6645 ze=42.27<-9182 Statuses=0009 0009 02:32:37 Msec=2250 True Az=99.675 Ze=42.27 Az status=0009 Ze status=0009 02:32:37 Check angles 02:32:37 SkyScan query 02:32:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 02:32:38 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 02:32:38 Check angles 02:32:38 SkyScan query 02:32:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:32:39 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 02:32:39 Message to Master queued w/err=0: serial=206498 error=0 02:32:44 Received message from Master: op=Filter serial=206499 02:32:44 Color wheel filter change from 0 to 0 02:32:44 FLIGetFilterPos err=0 currentPosition=0 02:32:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:32:44 Filter is already there-color wheel unchanged 02:32:44 Received message from Master: op=Shutter serial=206500 02:32:44 Shutter LASER close 02:32:44 Received message from Camera: op=State serial=206502 02:32:44 GetSingleValue result=40 Value=cccccccc 02:32:44 SkyScan query 02:32:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:32:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:44 Parameters OK 02:32:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:44 Set A/D data flow result=40 02:32:44 Set A/D channel type result=40 02:32:44 Set A/D encoding result=40 02:32:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:44 Set channel filter=0.000000e+000 result=40 02:32:44 Config A/D Result=40 02:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:44 Get A/D filter: -9.255963e+061 result=40 02:32:44 Get A/D value=-858993460 result=40 02:32:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:32:44 Parameters OK 02:32:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:32:44 Set A/D data flow result=40 02:32:44 Set A/D channel type result=40 02:32:44 Set A/D encoding result=40 02:32:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:32:44 Set channel filter=0.000000e+000 result=40 02:32:44 Config A/D Result=40 02:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:32:44 Get A/D filter: -9.255963e+061 result=40 02:32:44 Get A/D value=-858993460 result=40 02:32:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:32:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:32:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:32:44 Aux= 02:32:44 Message to Camera, serial 206502 queued 02:33:21 Received message from Master: op=PointingHead serial=206515 02:33:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:33:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:33:21 Point started: ret=0 02:33:21 point_skyscan result=0 02:33:22 Check angles 02:33:22 SkyScan query 02:33:23 SkyScan query done: ret=0 az=108.9<-7260 ze=38.475<-9435 Statuses=0009 0008 02:33:23 Msec=0 True Az=108.9 Ze=38.475 Az status=0009 Ze status=0008 02:33:23 Check angles 02:33:23 SkyScan query 02:33:24 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 02:33:24 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 02:33:24 Check angles 02:33:24 SkyScan query 02:33:24 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 02:33:24 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 02:33:24 Check angles 02:33:24 SkyScan query 02:33:25 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 02:33:25 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 02:33:25 Check angles 02:33:25 SkyScan query 02:33:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 02:33:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 02:33:26 Check angles 02:33:26 SkyScan query 02:33:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:33:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:33:27 Message to Master queued w/err=0: serial=206515 error=0 02:33:32 Received message from Master: op=Filter serial=206516 02:33:32 Color wheel filter change from 0 to 0 02:33:32 FLIGetFilterPos err=0 currentPosition=0 02:33:32 FLIGetStepsRemaining err=0 RemainingSteps=0 02:33:32 Filter is already there-color wheel unchanged 02:33:32 Received message from Master: op=Shutter serial=206517 02:33:32 Shutter LASER close 02:33:32 Received message from Camera: op=State serial=206519 02:33:32 GetSingleValue result=40 Value=cccccccc 02:33:32 SkyScan query 02:33:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:33:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:32 Parameters OK 02:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:32 Set A/D data flow result=40 02:33:32 Set A/D channel type result=40 02:33:32 Set A/D encoding result=40 02:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:32 Set channel filter=0.000000e+000 result=40 02:33:32 Config A/D Result=40 02:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:32 Get A/D filter: -9.255963e+061 result=40 02:33:32 Get A/D value=-858993460 result=40 02:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:33:32 Parameters OK 02:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:33:32 Set A/D data flow result=40 02:33:32 Set A/D channel type result=40 02:33:32 Set A/D encoding result=40 02:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:33:32 Set channel filter=0.000000e+000 result=40 02:33:32 Config A/D Result=40 02:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:33:32 Get A/D filter: -9.255963e+061 result=40 02:33:32 Get A/D value=-858993460 result=40 02:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:33:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:33:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:33:32 Aux= 02:33:32 Message to Camera, serial 206519 queued 02:34:08 Received message from Master: op=PointingHead serial=206531 02:34:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:34:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:34:09 Point started: ret=0 02:34:09 point_skyscan result=0 02:34:09 Check angles 02:34:09 SkyScan query 02:34:10 SkyScan query done: ret=0 az=153.21<-10214 ze=9.06<-11396 Statuses=0009 0009 02:34:10 Msec=0 True Az=153.21 Ze=9.06 Az status=0009 Ze status=0009 02:34:10 Check angles 02:34:10 SkyScan query 02:34:11 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.39<-12826 Statuses=0009 0009 02:34:11 Msec=750 True Az=135.39 Ze=-12.39 Az status=0009 Ze status=0009 02:34:11 Check angles 02:34:11 SkyScan query 02:34:11 SkyScan query done: ret=0 az=117.915<-7861 ze=-33.3<-14220 Statuses=0009 0009 02:34:11 Msec=1500 True Az=117.915 Ze=-33.3 Az status=0009 Ze status=0009 02:34:12 Check angles 02:34:12 SkyScan query 02:34:12 SkyScan query done: ret=0 az=100.53<-6702 ze=-51.555<-15437 Statuses=0009 0009 02:34:12 Msec=2250 True Az=100.53 Ze=-51.555 Az status=0009 Ze status=0009 02:34:12 Check angles 02:34:12 SkyScan query 02:34:13 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 02:34:13 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 02:34:13 Check angles 02:34:13 SkyScan query 02:34:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:34:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:34:14 Message to Master queued w/err=0: serial=206531 error=0 02:34:19 Received message from Master: op=Filter serial=206532 02:34:19 Color wheel filter change from 0 to 0 02:34:19 FLIGetFilterPos err=0 currentPosition=0 02:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 02:34:19 Filter is already there-color wheel unchanged 02:34:19 Received message from Master: op=Shutter serial=206533 02:34:19 Shutter LASER close 02:34:19 Received message from Camera: op=State serial=206535 02:34:19 GetSingleValue result=40 Value=cccccccc 02:34:19 SkyScan query 02:34:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:20 Parameters OK 02:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:20 Set A/D data flow result=40 02:34:20 Set A/D channel type result=40 02:34:20 Set A/D encoding result=40 02:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:20 Set channel filter=0.000000e+000 result=40 02:34:20 Config A/D Result=40 02:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:20 Get A/D filter: -9.255963e+061 result=40 02:34:20 Get A/D value=-858993460 result=40 02:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:34:20 Parameters OK 02:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:34:20 Set A/D data flow result=40 02:34:20 Set A/D channel type result=40 02:34:20 Set A/D encoding result=40 02:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:34:20 Set channel filter=0.000000e+000 result=40 02:34:20 Config A/D Result=40 02:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:34:20 Get A/D filter: -9.255963e+061 result=40 02:34:20 Get A/D value=-858993460 result=40 02:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:34:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:34:20 Aux= 02:34:20 Message to Camera, serial 206535 queued 02:34:56 Received message from Master: op=PointingHead serial=206548 02:34:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:34:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:34:57 Point started: ret=0 02:34:57 point_skyscan result=0 02:34:57 Check angles 02:34:57 SkyScan query 02:34:58 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.33<-17422 Statuses=0009 0009 02:34:58 Msec=0 True Az=109.125 Ze=-81.33 Az status=0009 Ze status=0009 02:34:58 Check angles 02:34:58 SkyScan query 02:34:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.3<-18820 Statuses=0008 0009 02:34:59 Msec=750 True Az=112.995 Ze=-102.3 Az status=0008 Ze status=0009 02:34:59 Check angles 02:34:59 SkyScan query 02:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 02:35:00 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 02:35:00 Check angles 02:35:00 SkyScan query 02:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 02:35:00 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 02:35:01 Check angles 02:35:01 SkyScan query 02:35:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 02:35:01 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 02:35:01 Check angles 02:35:01 SkyScan query 02:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:35:02 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:35:02 Message to Master queued w/err=0: serial=206548 error=0 02:35:07 Received message from Master: op=Filter serial=206549 02:35:07 Color wheel filter change from 0 to 0 02:35:07 FLIGetFilterPos err=0 currentPosition=0 02:35:07 FLIGetStepsRemaining err=0 RemainingSteps=0 02:35:07 Filter is already there-color wheel unchanged 02:35:07 Received message from Master: op=Shutter serial=206550 02:35:07 Shutter LASER open 02:35:07 Received message from Camera: op=State serial=206552 02:35:07 GetSingleValue result=40 Value=cccccccc 02:35:07 SkyScan query 02:35:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:35:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:08 Parameters OK 02:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:08 Set A/D data flow result=40 02:35:08 Set A/D channel type result=40 02:35:08 Set A/D encoding result=40 02:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:08 Set channel filter=0.000000e+000 result=40 02:35:08 Config A/D Result=40 02:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:08 Get A/D filter: -9.255963e+061 result=40 02:35:08 Get A/D value=-858993460 result=40 02:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:08 Parameters OK 02:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:08 Set A/D data flow result=40 02:35:08 Set A/D channel type result=40 02:35:08 Set A/D encoding result=40 02:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:08 Set channel filter=0.000000e+000 result=40 02:35:08 Config A/D Result=40 02:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:08 Get A/D filter: -9.255963e+061 result=40 02:35:08 Get A/D value=-858993460 result=40 02:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:35:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:35:08 Aux= 02:35:08 Message to Camera, serial 206552 queued 02:35:16 Received message from Master: op=Shutter serial=206562 02:35:16 Shutter LASER close 02:35:17 Received message from Master: op=PointingHead serial=206566 02:35:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:35:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:35:17 Point started: ret=0 02:35:17 point_skyscan result=0 02:35:18 Check angles 02:35:18 SkyScan query 02:35:18 SkyScan query done: ret=0 az=89.49<-5966 ze=156.795<-1547 Statuses=0009 0009 02:35:18 Msec=0 True Az=89.49 Ze=156.795 Az status=0009 Ze status=0009 02:35:19 Check angles 02:35:19 SkyScan query 02:35:19 SkyScan query done: ret=0 az=71.535<-4769 ze=135.3<-2980 Statuses=0009 0009 02:35:19 Msec=750 True Az=71.535 Ze=135.3 Az status=0009 Ze status=0009 02:35:19 Check angles 02:35:19 SkyScan query 02:35:20 SkyScan query done: ret=0 az=54.24<-3616 ze=114.375<-4375 Statuses=0009 0009 02:35:20 Msec=1500 True Az=54.24 Ze=114.375 Az status=0009 Ze status=0009 02:35:20 Check angles 02:35:20 SkyScan query 02:35:21 SkyScan query done: ret=0 az=40.995<-2733 ze=93.465<-5769 Statuses=0009 0009 02:35:21 Msec=2250 True Az=40.995 Ze=93.465 Az status=0009 Ze status=0009 02:35:21 Check angles 02:35:21 SkyScan query 02:35:21 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 02:35:21 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 02:35:22 Check angles 02:35:22 SkyScan query 02:35:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 02:35:22 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 02:35:22 Check angles 02:35:22 SkyScan query 02:35:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:35:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:35:23 Message to Master queued w/err=0: serial=206566 error=0 02:35:28 Received message from Master: op=Filter serial=206567 02:35:28 Color wheel filter change from 0 to 0 02:35:28 FLIGetFilterPos err=0 currentPosition=0 02:35:28 FLIGetStepsRemaining err=0 RemainingSteps=0 02:35:28 Filter is already there-color wheel unchanged 02:35:28 Received message from Master: op=Shutter serial=206568 02:35:28 Shutter LASER close 02:35:28 Received message from Camera: op=State serial=206570 02:35:28 GetSingleValue result=40 Value=cccccccc 02:35:28 SkyScan query [UTC 2018-12-17 02:35:29] 02:35:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:35:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:29 Parameters OK 02:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:29 Set A/D data flow result=40 02:35:29 Set A/D channel type result=40 02:35:29 Set A/D encoding result=40 02:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:29 Set channel filter=0.000000e+000 result=40 02:35:29 Config A/D Result=40 02:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:29 Get A/D filter: -9.255963e+061 result=40 02:35:29 Get A/D value=-858993460 result=40 02:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:35:29 Parameters OK 02:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:35:29 Set A/D data flow result=40 02:35:29 Set A/D channel type result=40 02:35:29 Set A/D encoding result=40 02:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:35:29 Set channel filter=0.000000e+000 result=40 02:35:29 Config A/D Result=40 02:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:35:29 Get A/D filter: -9.255963e+061 result=40 02:35:29 Get A/D value=-858993460 result=40 02:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:35:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:35:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:35:29 Aux= 02:35:29 Message to Camera, serial 206570 queued [UTC 2018-12-17 02:35:52] 02:36:06 Received message from Master: op=PointingHead serial=206583 02:36:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:36:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:36:06 Point started: ret=0 02:36:06 point_skyscan result=0 02:36:07 Check angles 02:36:07 SkyScan query 02:36:07 SkyScan query done: ret=0 az=40.995<-2733 ze=21.255<-10583 Statuses=0008 0009 02:36:07 Msec=0 True Az=40.995 Ze=21.255 Az status=0008 Ze status=0009 02:36:08 Check angles 02:36:08 SkyScan query 02:36:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.165<-12011 Statuses=0008 0009 02:36:08 Msec=750 True Az=40.995 Ze=-0.165 Az status=0008 Ze status=0009 02:36:08 Check angles 02:36:08 SkyScan query 02:36:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.15<-13410 Statuses=0008 0009 02:36:09 Msec=1500 True Az=40.995 Ze=-21.15 Az status=0008 Ze status=0009 02:36:09 Check angles 02:36:09 SkyScan query 02:36:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 02:36:10 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 02:36:10 Check angles 02:36:10 SkyScan query 02:36:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:36:10 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:36:10 Message to Master queued w/err=0: serial=206583 error=0 02:36:15 Received message from Master: op=Filter serial=206584 02:36:15 Color wheel filter change from 0 to 0 02:36:15 FLIGetFilterPos err=0 currentPosition=0 02:36:15 FLIGetStepsRemaining err=0 RemainingSteps=0 02:36:15 Filter is already there-color wheel unchanged 02:36:16 Received message from Master: op=Shutter serial=206585 02:36:16 Shutter LASER close 02:36:16 Received message from Camera: op=State serial=206587 02:36:16 GetSingleValue result=40 Value=cccccccc 02:36:16 SkyScan query 02:36:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:36:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:16 Parameters OK 02:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:16 Set A/D data flow result=40 02:36:16 Set A/D channel type result=40 02:36:16 Set A/D encoding result=40 02:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:16 Set channel filter=0.000000e+000 result=40 02:36:16 Config A/D Result=40 02:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:16 Get A/D filter: -9.255963e+061 result=40 02:36:16 Get A/D value=-858993460 result=40 02:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:36:16 Parameters OK 02:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:36:16 Set A/D data flow result=40 02:36:16 Set A/D channel type result=40 02:36:16 Set A/D encoding result=40 02:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:36:16 Set channel filter=0.000000e+000 result=40 02:36:16 Config A/D Result=40 02:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:36:16 Get A/D filter: -9.255963e+061 result=40 02:36:16 Get A/D value=-858993460 result=40 02:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:36:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:36:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:36:16 Aux= 02:36:16 Message to Camera, serial 206587 queued 02:36:53 Received message from Master: op=PointingHead serial=206600 02:36:53 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:36:53 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:36:53 Point started: ret=0 02:36:53 point_skyscan result=0 02:36:54 Check angles 02:36:54 SkyScan query 02:36:55 SkyScan query done: ret=0 az=64.32<-4288 ze=-68.64<-16576 Statuses=0009 0009 02:36:55 Msec=0 True Az=64.32 Ze=-68.64 Az status=0009 Ze status=0009 02:36:55 Check angles 02:36:55 SkyScan query 02:36:56 SkyScan query done: ret=0 az=81.75<-5450 ze=-89.625<-17975 Statuses=0009 0009 02:36:56 Msec=750 True Az=81.75 Ze=-89.625 Az status=0009 Ze status=0009 02:36:56 Check angles 02:36:56 SkyScan query 02:36:56 SkyScan query done: ret=0 az=99.6<-6640 ze=-111<-19400 Statuses=0009 0009 02:36:56 Msec=1500 True Az=99.6 Ze=-111 Az status=0009 Ze status=0009 02:36:56 Check angles 02:36:56 SkyScan query 02:36:57 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.895<-20793 Statuses=0009 0009 02:36:57 Msec=2250 True Az=117.045 Ze=-131.895 Az status=0009 Ze status=0009 02:36:57 Check angles 02:36:57 SkyScan query 02:36:58 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.57<-21438 Statuses=0009 0008 02:36:58 Msec=3000 True Az=131.085 Ze=-141.57 Az status=0009 Ze status=0008 02:36:58 Check angles 02:36:58 SkyScan query 02:36:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:36:59 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:36:59 Message to Master queued w/err=0: serial=206600 error=0 02:37:04 Received message from Master: op=Filter serial=206601 02:37:04 Color wheel filter change from 0 to 0 02:37:04 FLIGetFilterPos err=0 currentPosition=0 02:37:04 FLIGetStepsRemaining err=0 RemainingSteps=0 02:37:04 Filter is already there-color wheel unchanged 02:37:04 Received message from Master: op=Shutter serial=206602 02:37:04 Shutter LASER close 02:37:04 Received message from Camera: op=State serial=206604 02:37:04 GetSingleValue result=40 Value=cccccccc 02:37:04 SkyScan query 02:37:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:37:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:04 Parameters OK 02:37:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:04 Set A/D data flow result=40 02:37:04 Set A/D channel type result=40 02:37:04 Set A/D encoding result=40 02:37:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:04 Set channel filter=0.000000e+000 result=40 02:37:04 Config A/D Result=40 02:37:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:04 Get A/D filter: -9.255963e+061 result=40 02:37:04 Get A/D value=-858993460 result=40 02:37:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:04 Parameters OK 02:37:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:04 Set A/D data flow result=40 02:37:04 Set A/D channel type result=40 02:37:04 Set A/D encoding result=40 02:37:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:04 Set channel filter=0.000000e+000 result=40 02:37:04 Config A/D Result=40 02:37:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:04 Get A/D filter: -9.255963e+061 result=40 02:37:04 Get A/D value=-858993460 result=40 02:37:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:04 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:37:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:37:04 Aux= 02:37:04 Message to Camera, serial 206604 queued 02:37:41 Received message from Master: op=PointingHead serial=206617 02:37:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:37:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:37:42 Point started: ret=0 02:37:42 point_skyscan result=0 02:37:42 Check angles 02:37:42 SkyScan query 02:37:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 02:37:43 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 02:37:43 Check angles 02:37:43 SkyScan query 02:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:37:44 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:37:44 Message to Master queued w/err=0: serial=206617 error=0 02:37:49 Received message from Master: op=Filter serial=206618 02:37:49 Color wheel filter change from 0 to 0 02:37:49 FLIGetFilterPos err=0 currentPosition=0 02:37:49 FLIGetStepsRemaining err=0 RemainingSteps=0 02:37:49 Filter is already there-color wheel unchanged 02:37:49 Received message from Master: op=Shutter serial=206619 02:37:49 Shutter LASER open 02:37:49 Received message from Camera: op=State serial=206621 02:37:49 GetSingleValue result=40 Value=cccccccc 02:37:49 SkyScan query 02:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:37:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:50 Parameters OK 02:37:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:50 Set A/D data flow result=40 02:37:50 Set A/D channel type result=40 02:37:50 Set A/D encoding result=40 02:37:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:50 Set channel filter=0.000000e+000 result=40 02:37:50 Config A/D Result=40 02:37:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:50 Get A/D filter: -9.255963e+061 result=40 02:37:50 Get A/D value=-858993460 result=40 02:37:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:37:50 Parameters OK 02:37:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:37:50 Set A/D data flow result=40 02:37:50 Set A/D channel type result=40 02:37:50 Set A/D encoding result=40 02:37:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:37:50 Set channel filter=0.000000e+000 result=40 02:37:50 Config A/D Result=40 02:37:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:37:50 Get A/D filter: -9.255963e+061 result=40 02:37:50 Get A/D value=-858993460 result=40 02:37:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:37:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:37:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:37:50 Aux= 02:37:50 Message to Camera, serial 206621 queued 02:37:58 Received message from Master: op=Shutter serial=206631 02:37:58 Shutter LASER close 02:37:59 Received message from Master: op=PointingHead serial=206635 02:37:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:37:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:37:59 Point started: ret=0 02:37:59 point_skyscan result=0 02:38:00 Check angles 02:38:00 SkyScan query 02:38:00 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.175<-21545 Statuses=0009 0009 02:38:00 Msec=0 True Az=136.17 Ze=-143.175 Az status=0009 Ze status=0009 02:38:00 Check angles 02:38:00 SkyScan query 02:38:01 SkyScan query done: ret=0 az=153.975<-10265 ze=-121.74<-20116 Statuses=0009 0009 02:38:01 Msec=750 True Az=153.975 Ze=-121.74 Az status=0009 Ze status=0009 02:38:01 Check angles 02:38:01 SkyScan query 02:38:02 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.68<-18712 Statuses=0009 0009 02:38:02 Msec=1500 True Az=171.42 Ze=-100.68 Az status=0009 Ze status=0009 02:38:02 Check angles 02:38:02 SkyScan query 02:38:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 02:38:02 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 02:38:03 Check angles 02:38:03 SkyScan query 02:38:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.83<-15922 Statuses=0008 0009 02:38:03 Msec=3000 True Az=176.01 Ze=-58.83 Az status=0008 Ze status=0009 02:38:03 Check angles 02:38:03 SkyScan query 02:38:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:38:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:38:04 Message to Master queued w/err=0: serial=206635 error=0 02:38:09 Received message from Master: op=Filter serial=206636 02:38:09 Color wheel filter change from 0 to 0 02:38:09 FLIGetFilterPos err=0 currentPosition=0 02:38:09 FLIGetStepsRemaining err=0 RemainingSteps=0 02:38:09 Filter is already there-color wheel unchanged 02:38:09 Received message from Master: op=Shutter serial=206637 02:38:09 Shutter LASER close 02:38:09 Received message from Camera: op=State serial=206639 02:38:09 GetSingleValue result=40 Value=cccccccc 02:38:09 SkyScan query 02:38:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:38:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:10 Parameters OK 02:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:10 Set A/D data flow result=40 02:38:10 Set A/D channel type result=40 02:38:10 Set A/D encoding result=40 02:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:10 Set channel filter=0.000000e+000 result=40 02:38:10 Config A/D Result=40 02:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:10 Get A/D filter: -9.255963e+061 result=40 02:38:10 Get A/D value=-858993460 result=40 02:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:10 Parameters OK 02:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:10 Set A/D data flow result=40 02:38:10 Set A/D channel type result=40 02:38:10 Set A/D encoding result=40 02:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:10 Set channel filter=0.000000e+000 result=40 02:38:10 Config A/D Result=40 02:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:10 Get A/D filter: -9.255963e+061 result=40 02:38:10 Get A/D value=-858993460 result=40 02:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:38:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:38:10 Aux= 02:38:10 Message to Camera, serial 206639 queued 02:38:46 Received message from Master: op=PointingHead serial=206651 02:38:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:38:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:38:46 Point started: ret=0 02:38:46 point_skyscan result=0 02:38:47 Check angles 02:38:47 SkyScan query 02:38:47 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.615<-13441 Statuses=0009 0009 02:38:47 Msec=0 True Az=152.76 Ze=-21.615 Az status=0009 Ze status=0009 02:38:48 Check angles 02:38:48 SkyScan query 02:38:48 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.63<-12042 Statuses=0009 0009 02:38:48 Msec=750 True Az=135.39 Ze=-0.63 Az status=0009 Ze status=0009 02:38:48 Check angles 02:38:48 SkyScan query 02:38:49 SkyScan query done: ret=0 az=117.765<-7851 ze=20.31<-10646 Statuses=0009 0009 02:38:49 Msec=1500 True Az=117.765 Ze=20.31 Az status=0009 Ze status=0009 02:38:49 Check angles 02:38:49 SkyScan query 02:38:50 SkyScan query done: ret=0 az=100.425<-6695 ze=41.28<-9248 Statuses=0009 0009 02:38:50 Msec=2250 True Az=100.425 Ze=41.28 Az status=0009 Ze status=0009 02:38:50 Check angles 02:38:50 SkyScan query 02:38:50 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 02:38:50 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 02:38:51 Check angles 02:38:51 SkyScan query 02:38:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:38:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:38:51 Message to Master queued w/err=0: serial=206651 error=0 02:38:56 Received message from Master: op=Filter serial=206652 02:38:56 Color wheel filter change from 0 to 0 02:38:56 FLIGetFilterPos err=0 currentPosition=0 02:38:56 FLIGetStepsRemaining err=0 RemainingSteps=0 02:38:56 Filter is already there-color wheel unchanged 02:38:56 Received message from Master: op=Shutter serial=206653 02:38:56 Shutter LASER close 02:38:56 Received message from Camera: op=State serial=206655 02:38:56 GetSingleValue result=40 Value=cccccccc 02:38:56 SkyScan query 02:38:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:38:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:57 Parameters OK 02:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:57 Set A/D data flow result=40 02:38:57 Set A/D channel type result=40 02:38:57 Set A/D encoding result=40 02:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:57 Set channel filter=0.000000e+000 result=40 02:38:57 Config A/D Result=40 02:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:57 Get A/D filter: -9.255963e+061 result=40 02:38:57 Get A/D value=-858993460 result=40 02:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:38:57 Parameters OK 02:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:38:57 Set A/D data flow result=40 02:38:57 Set A/D channel type result=40 02:38:57 Set A/D encoding result=40 02:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:38:57 Set channel filter=0.000000e+000 result=40 02:38:57 Config A/D Result=40 02:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:38:57 Get A/D filter: -9.255963e+061 result=40 02:38:57 Get A/D value=-858993460 result=40 02:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:38:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:38:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:38:57 Aux= 02:38:57 Message to Camera, serial 206655 queued 02:39:34 Received message from Master: op=PointingHead serial=206668 02:39:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:39:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:39:34 Point started: ret=0 02:39:34 point_skyscan result=0 02:39:35 Check angles 02:39:35 SkyScan query 02:39:36 SkyScan query done: ret=0 az=108.96<-7264 ze=38.475<-9435 Statuses=0009 0008 02:39:36 Msec=0 True Az=108.96 Ze=38.475 Az status=0009 Ze status=0008 02:39:36 Check angles 02:39:36 SkyScan query 02:39:36 SkyScan query done: ret=0 az=126.45<-8430 ze=38.505<-9433 Statuses=0009 0008 02:39:36 Msec=750 True Az=126.45 Ze=38.505 Az status=0009 Ze status=0008 02:39:36 Check angles 02:39:36 SkyScan query 02:39:37 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 02:39:37 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 02:39:37 Check angles 02:39:37 SkyScan query 02:39:38 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 02:39:38 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 02:39:38 Check angles 02:39:38 SkyScan query 02:39:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 02:39:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 02:39:39 Check angles 02:39:39 SkyScan query 02:39:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:39:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:39:39 Message to Master queued w/err=0: serial=206668 error=0 02:39:44 Received message from Master: op=Filter serial=206669 02:39:44 Color wheel filter change from 0 to 0 02:39:44 FLIGetFilterPos err=0 currentPosition=0 02:39:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:39:44 Filter is already there-color wheel unchanged 02:39:44 Received message from Master: op=Shutter serial=206670 02:39:44 Shutter LASER close 02:39:45 Received message from Camera: op=State serial=206672 02:39:45 GetSingleValue result=40 Value=cccccccc 02:39:45 SkyScan query 02:39:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:39:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:45 Parameters OK 02:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:45 Set A/D data flow result=40 02:39:45 Set A/D channel type result=40 02:39:45 Set A/D encoding result=40 02:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:45 Set channel filter=0.000000e+000 result=40 02:39:45 Config A/D Result=40 02:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:45 Get A/D filter: -9.255963e+061 result=40 02:39:45 Get A/D value=-858993460 result=40 02:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:39:45 Parameters OK 02:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:39:45 Set A/D data flow result=40 02:39:45 Set A/D channel type result=40 02:39:45 Set A/D encoding result=40 02:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:39:45 Set channel filter=0.000000e+000 result=40 02:39:45 Config A/D Result=40 02:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:39:45 Get A/D filter: -9.255963e+061 result=40 02:39:45 Get A/D value=-858993460 result=40 02:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:39:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:39:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:39:45 Aux= 02:39:45 Message to Camera, serial 206672 queued 02:40:22 Received message from Master: op=PointingHead serial=206685 02:40:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:40:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:40:22 Point started: ret=0 02:40:22 point_skyscan result=0 02:40:23 Check angles 02:40:23 SkyScan query 02:40:24 SkyScan query done: ret=0 az=152.955<-10197 ze=8.76<-11416 Statuses=0009 0009 02:40:24 Msec=0 True Az=152.955 Ze=8.76 Az status=0009 Ze status=0009 02:40:24 Check angles 02:40:24 SkyScan query 02:40:24 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.225<-12815 Statuses=0009 0009 02:40:24 Msec=750 True Az=135.6 Ze=-12.225 Az status=0009 Ze status=0009 02:40:25 Check angles 02:40:25 SkyScan query 02:40:25 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.6<-14240 Statuses=0009 0009 02:40:25 Msec=1500 True Az=117.6 Ze=-33.6 Az status=0009 Ze status=0009 02:40:25 Check angles 02:40:25 SkyScan query 02:40:26 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.57<-15438 Statuses=0009 0009 02:40:26 Msec=2250 True Az=100.38 Ze=-51.57 Az status=0009 Ze status=0009 02:40:26 Check angles 02:40:26 SkyScan query 02:40:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 02:40:27 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 02:40:27 Check angles 02:40:27 SkyScan query 02:40:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:40:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 02:40:27 Message to Master queued w/err=0: serial=206685 error=0 02:40:32 Received message from Master: op=Filter serial=206686 02:40:32 Color wheel filter change from 0 to 0 02:40:32 FLIGetFilterPos err=0 currentPosition=0 02:40:32 FLIGetStepsRemaining err=0 RemainingSteps=0 02:40:32 Filter is already there-color wheel unchanged 02:40:33 Received message from Master: op=Shutter serial=206687 02:40:33 Shutter LASER close 02:40:33 Received message from Camera: op=State serial=206689 02:40:33 GetSingleValue result=40 Value=cccccccc 02:40:33 SkyScan query 02:40:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:40:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:33 Parameters OK 02:40:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:33 Set A/D data flow result=40 02:40:33 Set A/D channel type result=40 02:40:33 Set A/D encoding result=40 02:40:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:33 Set channel filter=0.000000e+000 result=40 02:40:33 Config A/D Result=40 02:40:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:33 Get A/D filter: -9.255963e+061 result=40 02:40:33 Get A/D value=-858993460 result=40 02:40:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:40:33 Parameters OK 02:40:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:40:33 Set A/D data flow result=40 02:40:33 Set A/D channel type result=40 02:40:33 Set A/D encoding result=40 02:40:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:40:33 Set channel filter=0.000000e+000 result=40 02:40:33 Config A/D Result=40 02:40:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:40:33 Get A/D filter: -9.255963e+061 result=40 02:40:33 Get A/D value=-858993460 result=40 02:40:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:40:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:40:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:40:33 Aux= 02:40:33 Message to Camera, serial 206689 queued 02:41:10 Received message from Master: op=PointingHead serial=206702 02:41:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:41:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:41:10 Point started: ret=0 02:41:10 point_skyscan result=0 02:41:11 Check angles 02:41:11 SkyScan query 02:41:12 SkyScan query done: ret=0 az=108.84<-7256 ze=-81<-17400 Statuses=0009 0009 02:41:12 Msec=0 True Az=108.84 Ze=-81 Az status=0009 Ze status=0009 02:41:12 Check angles 02:41:12 SkyScan query 02:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 02:41:12 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 02:41:13 Check angles 02:41:13 SkyScan query 02:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 02:41:13 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 02:41:13 Check angles 02:41:13 SkyScan query 02:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 02:41:14 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 02:41:14 Check angles 02:41:14 SkyScan query 02:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.11<-23074 Statuses=0008 0009 02:41:15 Msec=3000 True Az=112.995 Ze=-166.11 Az status=0008 Ze status=0009 02:41:15 Check angles 02:41:15 SkyScan query 02:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:41:15 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:41:15 Message to Master queued w/err=0: serial=206702 error=0 02:41:20 Received message from Master: op=Filter serial=206703 02:41:20 Color wheel filter change from 0 to 0 02:41:20 FLIGetFilterPos err=0 currentPosition=0 02:41:20 FLIGetStepsRemaining err=0 RemainingSteps=0 02:41:20 Filter is already there-color wheel unchanged 02:41:21 Received message from Master: op=Shutter serial=206704 02:41:21 Shutter LASER open 02:41:21 Received message from Camera: op=State serial=206706 02:41:21 GetSingleValue result=40 Value=cccccccc 02:41:21 SkyScan query 02:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:41:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:21 Parameters OK 02:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:21 Set A/D data flow result=40 02:41:21 Set A/D channel type result=40 02:41:21 Set A/D encoding result=40 02:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:21 Set channel filter=0.000000e+000 result=40 02:41:21 Config A/D Result=40 02:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:21 Get A/D filter: -9.255963e+061 result=40 02:41:21 Get A/D value=-858993460 result=40 02:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:21 Parameters OK 02:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:21 Set A/D data flow result=40 02:41:21 Set A/D channel type result=40 02:41:21 Set A/D encoding result=40 02:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:21 Set channel filter=0.000000e+000 result=40 02:41:21 Config A/D Result=40 02:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:21 Get A/D filter: -9.255963e+061 result=40 02:41:21 Get A/D value=-858993460 result=40 02:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:41:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:41:21 Aux= 02:41:21 Message to Camera, serial 206706 queued 02:41:30 Received message from Master: op=Shutter serial=206716 02:41:30 Shutter LASER close 02:41:30 Received message from Master: op=PointingHead serial=206720 02:41:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:41:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:41:31 Point started: ret=0 02:41:31 point_skyscan result=0 02:41:31 Check angles 02:41:31 SkyScan query 02:41:32 SkyScan query done: ret=0 az=90.06<-6004 ze=157.35<-1510 Statuses=0009 0009 02:41:32 Msec=0 True Az=90.06 Ze=157.35 Az status=0009 Ze status=0009 02:41:32 Check angles 02:41:32 SkyScan query 02:41:33 SkyScan query done: ret=0 az=72.54<-4836 ze=136.395<-2907 Statuses=0009 0009 02:41:33 Msec=750 True Az=72.54 Ze=136.395 Az status=0009 Ze status=0009 02:41:33 Check angles 02:41:33 SkyScan query 02:41:33 SkyScan query done: ret=0 az=54.84<-3656 ze=115.005<-4333 Statuses=0009 0009 02:41:33 Msec=1500 True Az=54.84 Ze=115.005 Az status=0009 Ze status=0009 02:41:34 Check angles 02:41:34 SkyScan query 02:41:34 SkyScan query done: ret=0 az=41.01<-2734 ze=94.035<-5731 Statuses=0009 0009 02:41:34 Msec=2250 True Az=41.01 Ze=94.035 Az status=0009 Ze status=0009 02:41:34 Check angles 02:41:34 SkyScan query 02:41:35 SkyScan query done: ret=0 az=40.98<-2732 ze=73.05<-7130 Statuses=0008 0009 02:41:35 Msec=3000 True Az=40.98 Ze=73.05 Az status=0008 Ze status=0009 02:41:35 Check angles 02:41:35 SkyScan query 02:41:36 SkyScan query done: ret=0 az=40.98<-2732 ze=52.38<-8508 Statuses=0008 0009 02:41:36 Msec=3750 True Az=40.98 Ze=52.38 Az status=0008 Ze status=0009 02:41:36 Check angles 02:41:36 SkyScan query 02:41:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:41:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:41:36 Message to Master queued w/err=0: serial=206720 error=0 02:41:41 Received message from Master: op=Filter serial=206721 02:41:41 Color wheel filter change from 0 to 0 02:41:41 FLIGetFilterPos err=0 currentPosition=0 02:41:41 FLIGetStepsRemaining err=0 RemainingSteps=0 02:41:41 Filter is already there-color wheel unchanged 02:41:42 Received message from Master: op=Shutter serial=206722 02:41:42 Shutter LASER close 02:41:42 Received message from Camera: op=State serial=206724 02:41:42 GetSingleValue result=40 Value=cccccccc 02:41:42 SkyScan query 02:41:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:41:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:42 Parameters OK 02:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:42 Set A/D data flow result=40 02:41:42 Set A/D channel type result=40 02:41:42 Set A/D encoding result=40 02:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:42 Set channel filter=0.000000e+000 result=40 02:41:42 Config A/D Result=40 02:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:42 Get A/D filter: -9.255963e+061 result=40 02:41:42 Get A/D value=-858993460 result=40 02:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:41:42 Parameters OK 02:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:41:42 Set A/D data flow result=40 02:41:42 Set A/D channel type result=40 02:41:42 Set A/D encoding result=40 02:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:41:42 Set channel filter=0.000000e+000 result=40 02:41:42 Config A/D Result=40 02:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:41:42 Get A/D filter: -9.255963e+061 result=40 02:41:42 Get A/D value=-858993460 result=40 02:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:41:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:41:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:41:42 Aux= 02:41:42 Message to Camera, serial 206724 queued 02:42:19 Received message from Master: op=PointingHead serial=206737 02:42:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:42:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:42:20 Point started: ret=0 02:42:20 point_skyscan result=0 02:42:20 Check angles 02:42:20 SkyScan query 02:42:21 SkyScan query done: ret=0 az=40.995<-2733 ze=21.465<-10569 Statuses=0008 0009 02:42:21 Msec=0 True Az=40.995 Ze=21.465 Az status=0008 Ze status=0009 02:42:21 Check angles 02:42:21 SkyScan query 02:42:22 SkyScan query done: ret=0 az=41.01<-2734 ze=0.48<-11968 Statuses=0008 0009 02:42:22 Msec=750 True Az=41.01 Ze=0.48 Az status=0008 Ze status=0009 02:42:22 Check angles 02:42:22 SkyScan query 02:42:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.49<-13366 Statuses=0008 0009 02:42:23 Msec=1500 True Az=40.995 Ze=-20.49 Az status=0008 Ze status=0009 02:42:23 Check angles 02:42:23 SkyScan query 02:42:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 02:42:23 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 02:42:23 Check angles 02:42:23 SkyScan query 02:42:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:42:24 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:42:24 Message to Master queued w/err=0: serial=206737 error=0 02:42:29 Received message from Master: op=Filter serial=206738 02:42:29 Color wheel filter change from 0 to 0 02:42:29 FLIGetFilterPos err=0 currentPosition=0 02:42:29 FLIGetStepsRemaining err=0 RemainingSteps=0 02:42:29 Filter is already there-color wheel unchanged 02:42:29 Received message from Master: op=Shutter serial=206739 02:42:29 Shutter LASER close 02:42:29 Received message from Camera: op=State serial=206741 02:42:29 GetSingleValue result=40 Value=cccccccc 02:42:29 SkyScan query 02:42:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:42:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:30 Parameters OK 02:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:30 Set A/D data flow result=40 02:42:30 Set A/D channel type result=40 02:42:30 Set A/D encoding result=40 02:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:30 Set channel filter=0.000000e+000 result=40 02:42:30 Config A/D Result=40 02:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:30 Get A/D filter: -9.255963e+061 result=40 02:42:30 Get A/D value=-858993460 result=40 02:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:42:30 Parameters OK 02:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:42:30 Set A/D data flow result=40 02:42:30 Set A/D channel type result=40 02:42:30 Set A/D encoding result=40 02:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:42:30 Set channel filter=0.000000e+000 result=40 02:42:30 Config A/D Result=40 02:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:42:30 Get A/D filter: -9.255963e+061 result=40 02:42:30 Get A/D value=-858993460 result=40 02:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:42:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:42:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:42:30 Aux= 02:42:30 Message to Camera, serial 206741 queued 02:43:07 Received message from Master: op=PointingHead serial=206754 02:43:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:43:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:43:07 Point started: ret=0 02:43:07 point_skyscan result=0 02:43:08 Check angles 02:43:08 SkyScan query 02:43:08 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.115<-16541 Statuses=0009 0009 02:43:08 Msec=0 True Az=63.975 Ze=-68.115 Az status=0009 Ze status=0009 02:43:08 Check angles 02:43:08 SkyScan query 02:43:09 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.1<-17940 Statuses=0009 0009 02:43:09 Msec=750 True Az=81.39 Ze=-89.1 Az status=0009 Ze status=0009 02:43:09 Check angles 02:43:09 SkyScan query 02:43:10 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.01<-19334 Statuses=0009 0009 02:43:10 Msec=1500 True Az=98.91 Ze=-110.01 Az status=0009 Ze status=0009 02:43:10 Check angles 02:43:10 SkyScan query 02:43:11 SkyScan query done: ret=0 az=116.295<-7753 ze=-130.995<-20733 Statuses=0009 0009 02:43:11 Msec=2250 True Az=116.295 Ze=-130.995 Az status=0009 Ze status=0009 02:43:11 Check angles 02:43:11 SkyScan query 02:43:11 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 02:43:11 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 02:43:11 Check angles 02:43:11 SkyScan query 02:43:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:43:12 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:43:12 Message to Master queued w/err=0: serial=206754 error=0 02:43:17 Received message from Master: op=Filter serial=206755 02:43:17 Color wheel filter change from 0 to 0 02:43:17 FLIGetFilterPos err=0 currentPosition=0 02:43:17 FLIGetStepsRemaining err=0 RemainingSteps=0 02:43:17 Filter is already there-color wheel unchanged 02:43:17 Received message from Master: op=Shutter serial=206756 02:43:17 Shutter LASER close 02:43:17 Received message from Camera: op=State serial=206758 02:43:17 GetSingleValue result=40 Value=cccccccc 02:43:17 SkyScan query 02:43:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:43:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:18 Parameters OK 02:43:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:18 Set A/D data flow result=40 02:43:18 Set A/D channel type result=40 02:43:18 Set A/D encoding result=40 02:43:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:18 Set channel filter=0.000000e+000 result=40 02:43:18 Config A/D Result=40 02:43:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:18 Get A/D filter: -9.255963e+061 result=40 02:43:18 Get A/D value=-858993460 result=40 02:43:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:43:18 Parameters OK 02:43:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:43:18 Set A/D data flow result=40 02:43:18 Set A/D channel type result=40 02:43:18 Set A/D encoding result=40 02:43:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:43:18 Set channel filter=0.000000e+000 result=40 02:43:18 Config A/D Result=40 02:43:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:43:18 Get A/D filter: -9.255963e+061 result=40 02:43:18 Get A/D value=-858993460 result=40 02:43:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:43:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:43:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:43:18 Aux= 02:43:18 Message to Camera, serial 206758 queued 02:43:55 Received message from Master: op=PointingHead serial=206771 02:43:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:43:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:43:55 Point started: ret=0 02:43:55 point_skyscan result=0 02:43:56 Check angles 02:43:56 SkyScan query 02:43:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0009 0009 02:43:56 Msec=0 True Az=112.995 Ze=-171.075 Az status=0009 Ze status=0009 02:43:57 Check angles 02:43:57 SkyScan query 02:43:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:43:57 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:43:57 Message to Master queued w/err=0: serial=206771 error=0 02:44:02 Received message from Master: op=Filter serial=206772 02:44:02 Color wheel filter change from 0 to 0 02:44:02 FLIGetFilterPos err=0 currentPosition=0 02:44:02 FLIGetStepsRemaining err=0 RemainingSteps=0 02:44:02 Filter is already there-color wheel unchanged 02:44:02 Received message from Master: op=Shutter serial=206773 02:44:02 Shutter LASER open 02:44:03 Received message from Camera: op=State serial=206775 02:44:03 GetSingleValue result=40 Value=cccccccc 02:44:03 SkyScan query 02:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 02:44:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:03 Parameters OK 02:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:03 Set A/D data flow result=40 02:44:03 Set A/D channel type result=40 02:44:03 Set A/D encoding result=40 02:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:03 Set channel filter=0.000000e+000 result=40 02:44:03 Config A/D Result=40 02:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:03 Get A/D filter: -9.255963e+061 result=40 02:44:03 Get A/D value=-858993460 result=40 02:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:03 Parameters OK 02:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:03 Set A/D data flow result=40 02:44:03 Set A/D channel type result=40 02:44:03 Set A/D encoding result=40 02:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:03 Set channel filter=0.000000e+000 result=40 02:44:03 Config A/D Result=40 02:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:03 Get A/D filter: -9.255963e+061 result=40 02:44:03 Get A/D value=-858993460 result=40 02:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:44:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:44:03 Aux= 02:44:03 Message to Camera, serial 206775 queued 02:44:12 Received message from Master: op=Shutter serial=206785 02:44:12 Shutter LASER close 02:44:12 Received message from Master: op=PointingHead serial=206789 02:44:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:44:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:44:12 Point started: ret=0 02:44:12 point_skyscan result=0 02:44:13 Check angles 02:44:13 SkyScan query 02:44:14 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.175<-21545 Statuses=0009 0009 02:44:14 Msec=0 True Az=136.17 Ze=-143.175 Az status=0009 Ze status=0009 02:44:14 Check angles 02:44:14 SkyScan query 02:44:15 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.115<-20141 Statuses=0009 0009 02:44:15 Msec=750 True Az=153.555 Ze=-122.115 Az status=0009 Ze status=0009 02:44:15 Check angles 02:44:15 SkyScan query 02:44:15 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.695<-18713 Statuses=0009 0009 02:44:15 Msec=1500 True Az=171.48 Ze=-100.695 Az status=0009 Ze status=0009 02:44:16 Check angles 02:44:16 SkyScan query 02:44:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 02:44:16 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 02:44:16 Check angles 02:44:16 SkyScan query 02:44:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.875<-15925 Statuses=0008 0009 02:44:17 Msec=3000 True Az=176.01 Ze=-58.875 Az status=0008 Ze status=0009 02:44:17 Check angles 02:44:17 SkyScan query 02:44:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 02:44:18 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 02:44:18 Message to Master queued w/err=0: serial=206789 error=0 02:44:23 Received message from Master: op=Filter serial=206790 02:44:23 Color wheel filter change from 0 to 0 02:44:23 FLIGetFilterPos err=0 currentPosition=0 02:44:23 FLIGetStepsRemaining err=0 RemainingSteps=0 02:44:23 Filter is already there-color wheel unchanged 02:44:23 Received message from Master: op=Shutter serial=206791 02:44:23 Shutter LASER close 02:44:23 Received message from Camera: op=State serial=206793 02:44:23 GetSingleValue result=40 Value=cccccccc 02:44:23 SkyScan query 02:44:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:44:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:24 Parameters OK 02:44:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:24 Set A/D data flow result=40 02:44:24 Set A/D channel type result=40 02:44:24 Set A/D encoding result=40 02:44:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:24 Set channel filter=0.000000e+000 result=40 02:44:24 Config A/D Result=40 02:44:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:24 Get A/D filter: -9.255963e+061 result=40 02:44:24 Get A/D value=-858993460 result=40 02:44:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:44:24 Parameters OK 02:44:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:44:24 Set A/D data flow result=40 02:44:24 Set A/D channel type result=40 02:44:24 Set A/D encoding result=40 02:44:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:44:24 Set channel filter=0.000000e+000 result=40 02:44:24 Config A/D Result=40 02:44:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:44:24 Get A/D filter: -9.255963e+061 result=40 02:44:24 Get A/D value=-858993460 result=40 02:44:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:44:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:44:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:44:24 Aux= 02:44:24 Message to Camera, serial 206793 queued 02:45:00 Received message from Master: op=PointingHead serial=206806 02:45:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:45:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:45:01 Point started: ret=0 02:45:01 point_skyscan result=0 02:45:01 Check angles 02:45:01 SkyScan query 02:45:02 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.855<-13457 Statuses=0009 0009 02:45:02 Msec=0 True Az=152.955 Ze=-21.855 Az status=0009 Ze status=0009 02:45:02 Check angles 02:45:02 SkyScan query 02:45:03 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.84<-12056 Statuses=0009 0009 02:45:03 Msec=750 True Az=135.615 Ze=-0.84 Az status=0009 Ze status=0009 02:45:03 Check angles 02:45:03 SkyScan query 02:45:04 SkyScan query done: ret=0 az=117.585<-7839 ze=20.535<-10631 Statuses=0009 0009 02:45:04 Msec=1500 True Az=117.585 Ze=20.535 Az status=0009 Ze status=0009 02:45:04 Check angles 02:45:04 SkyScan query 02:45:04 SkyScan query done: ret=0 az=100.32<-6688 ze=41.505<-9233 Statuses=0009 0009 02:45:04 Msec=2250 True Az=100.32 Ze=41.505 Az status=0009 Ze status=0009 02:45:04 Check angles 02:45:04 SkyScan query 02:45:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 02:45:05 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 02:45:05 Check angles 02:45:05 SkyScan query 02:45:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:45:06 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 02:45:06 Message to Master queued w/err=0: serial=206806 error=0 02:45:11 Received message from Master: op=Filter serial=206807 02:45:11 Color wheel filter change from 0 to 0 02:45:11 FLIGetFilterPos err=0 currentPosition=0 02:45:11 FLIGetStepsRemaining err=0 RemainingSteps=0 02:45:11 Filter is already there-color wheel unchanged 02:45:11 Received message from Master: op=Shutter serial=206808 02:45:11 Shutter LASER close 02:45:11 Received message from Camera: op=State serial=206810 02:45:11 GetSingleValue result=40 Value=cccccccc 02:45:11 SkyScan query 02:45:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:45:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:12 Parameters OK 02:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:12 Set A/D data flow result=40 02:45:12 Set A/D channel type result=40 02:45:12 Set A/D encoding result=40 02:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:12 Set channel filter=0.000000e+000 result=40 02:45:12 Config A/D Result=40 02:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:12 Get A/D filter: -9.255963e+061 result=40 02:45:12 Get A/D value=-858993460 result=40 02:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:45:12 Parameters OK 02:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:45:12 Set A/D data flow result=40 02:45:12 Set A/D channel type result=40 02:45:12 Set A/D encoding result=40 02:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:45:12 Set channel filter=0.000000e+000 result=40 02:45:12 Config A/D Result=40 02:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:45:12 Get A/D filter: -9.255963e+061 result=40 02:45:12 Get A/D value=-858993460 result=40 02:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:45:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:45:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:45:12 Aux= 02:45:12 Message to Camera, serial 206810 queued 02:45:27 Received message from Master: op=Identify serial=206811 02:45:48 Received message from Master: op=PointingHead serial=206826 02:45:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:45:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:45:49 Point started: ret=0 02:45:49 point_skyscan result=0 02:45:50 Check angles 02:45:50 SkyScan query 02:45:50 SkyScan query done: ret=0 az=109.305<-7287 ze=38.49<-9434 Statuses=0009 0008 02:45:50 Msec=0 True Az=109.305 Ze=38.49 Az status=0009 Ze status=0008 02:45:50 Check angles 02:45:50 SkyScan query 02:45:51 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 02:45:51 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 02:45:51 Check angles 02:45:51 SkyScan query 02:45:52 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 02:45:52 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 02:45:52 Check angles 02:45:52 SkyScan query 02:45:52 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 02:45:52 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 02:45:53 Check angles 02:45:53 SkyScan query 02:45:53 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 02:45:53 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 02:45:53 Check angles 02:45:53 SkyScan query 02:45:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:45:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:45:54 Message to Master queued w/err=0: serial=206826 error=0 02:45:59 Received message from Master: op=Filter serial=206827 02:45:59 Color wheel filter change from 0 to 0 02:45:59 FLIGetFilterPos err=0 currentPosition=0 02:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 [UTC 2018-12-17 02:45:59] 02:45:59 Filter is already there-color wheel unchanged 02:45:59 Received message from Master: op=Shutter serial=206828 02:45:59 Shutter LASER close 02:45:59 Received message from Camera: op=State serial=206830 02:45:59 GetSingleValue result=40 Value=cccccccc 02:45:59 SkyScan query 02:46:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:46:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:00 Parameters OK 02:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:00 Set A/D data flow result=40 02:46:00 Set A/D channel type result=40 02:46:00 Set A/D encoding result=40 02:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:00 Set channel filter=0.000000e+000 result=40 02:46:00 Config A/D Result=40 02:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:00 Get A/D filter: -9.255963e+061 result=40 02:46:00 Get A/D value=-858993460 result=40 02:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:00 Parameters OK 02:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:00 Set A/D data flow result=40 02:46:00 Set A/D channel type result=40 02:46:00 Set A/D encoding result=40 02:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:00 Set channel filter=0.000000e+000 result=40 02:46:00 Config A/D Result=40 02:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:00 Get A/D filter: -9.255963e+061 result=40 02:46:00 Get A/D value=-858993460 result=40 02:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:46:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:46:00 Aux= 02:46:00 Message to Camera, serial 206830 queued 02:46:37 Received message from Master: op=PointingHead serial=206843 02:46:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:46:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:46:37 Point started: ret=0 02:46:37 point_skyscan result=0 02:46:38 Check angles 02:46:38 SkyScan query 02:46:38 SkyScan query done: ret=0 az=152.73<-10182 ze=8.295<-11447 Statuses=0009 0009 02:46:38 Msec=0 True Az=152.73 Ze=8.295 Az status=0009 Ze status=0009 02:46:38 Check angles 02:46:38 SkyScan query 02:46:39 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.57<-12838 Statuses=0009 0009 02:46:39 Msec=750 True Az=135.24 Ze=-12.57 Az status=0009 Ze status=0009 02:46:39 Check angles 02:46:39 SkyScan query 02:46:40 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.57<-14238 Statuses=0009 0009 02:46:40 Msec=1500 True Az=117.63 Ze=-33.57 Az status=0009 Ze status=0009 02:46:40 Check angles 02:46:40 SkyScan query 02:46:41 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.57<-15438 Statuses=0009 0009 02:46:41 Msec=2250 True Az=100.38 Ze=-51.57 Az status=0009 Ze status=0009 02:46:41 Check angles 02:46:41 SkyScan query 02:46:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 02:46:41 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 02:46:41 Check angles 02:46:41 SkyScan query 02:46:42 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 02:46:42 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 02:46:42 Message to Master queued w/err=0: serial=206843 error=0 02:46:47 Received message from Master: op=Filter serial=206844 02:46:47 Color wheel filter change from 0 to 0 02:46:47 FLIGetFilterPos err=0 currentPosition=0 02:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 02:46:47 Filter is already there-color wheel unchanged 02:46:47 Received message from Master: op=Shutter serial=206845 02:46:47 Shutter LASER close 02:46:47 Received message from Camera: op=State serial=206847 02:46:47 GetSingleValue result=40 Value=cccccccc 02:46:47 SkyScan query 02:46:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:46:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:48 Parameters OK 02:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:48 Set A/D data flow result=40 02:46:48 Set A/D channel type result=40 02:46:48 Set A/D encoding result=40 02:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:48 Set channel filter=0.000000e+000 result=40 02:46:48 Config A/D Result=40 02:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:48 Get A/D filter: -9.255963e+061 result=40 02:46:48 Get A/D value=-858993460 result=40 02:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:46:48 Parameters OK 02:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:46:48 Set A/D data flow result=40 02:46:48 Set A/D channel type result=40 02:46:48 Set A/D encoding result=40 02:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:46:48 Set channel filter=0.000000e+000 result=40 02:46:48 Config A/D Result=40 02:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:46:48 Get A/D filter: -9.255963e+061 result=40 02:46:48 Get A/D value=-858993460 result=40 02:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:46:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:46:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:46:48 Aux= 02:46:48 Message to Camera, serial 206847 queued 02:47:25 Received message from Master: op=PointingHead serial=206860 02:47:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:47:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:47:25 Point started: ret=0 02:47:25 point_skyscan result=0 02:47:26 Check angles 02:47:26 SkyScan query 02:47:26 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.135<-17409 Statuses=0009 0009 02:47:26 Msec=0 True Az=108.915 Ze=-81.135 Az status=0009 Ze status=0009 02:47:27 Check angles 02:47:27 SkyScan query 02:47:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.12<-18808 Statuses=0008 0009 02:47:27 Msec=750 True Az=112.995 Ze=-102.12 Az status=0008 Ze status=0009 02:47:27 Check angles 02:47:27 SkyScan query 02:47:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.075<-20205 Statuses=0008 0009 02:47:28 Msec=1500 True Az=112.995 Ze=-123.075 Az status=0008 Ze status=0009 02:47:28 Check angles 02:47:28 SkyScan query 02:47:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.045<-21603 Statuses=0008 0009 02:47:29 Msec=2250 True Az=112.995 Ze=-144.045 Az status=0008 Ze status=0009 02:47:29 Check angles 02:47:29 SkyScan query 02:47:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165<-23000 Statuses=0008 0009 02:47:29 Msec=3000 True Az=112.995 Ze=-165 Az status=0008 Ze status=0009 02:47:30 Check angles 02:47:30 SkyScan query 02:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:47:30 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:47:30 Message to Master queued w/err=0: serial=206860 error=0 02:47:35 Received message from Master: op=Filter serial=206861 02:47:35 Color wheel filter change from 0 to 0 02:47:35 FLIGetFilterPos err=0 currentPosition=0 02:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:47:35 Filter is already there-color wheel unchanged 02:47:35 Received message from Master: op=Shutter serial=206862 02:47:35 Shutter LASER open 02:47:35 Received message from Camera: op=State serial=206864 02:47:35 GetSingleValue result=40 Value=cccccccc 02:47:35 SkyScan query 02:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:36 Parameters OK 02:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:36 Set A/D data flow result=40 02:47:36 Set A/D channel type result=40 02:47:36 Set A/D encoding result=40 02:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:36 Set channel filter=0.000000e+000 result=40 02:47:36 Config A/D Result=40 02:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:36 Get A/D filter: -9.255963e+061 result=40 02:47:36 Get A/D value=-858993460 result=40 02:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:36 Parameters OK 02:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:36 Set A/D data flow result=40 02:47:36 Set A/D channel type result=40 02:47:36 Set A/D encoding result=40 02:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:36 Set channel filter=0.000000e+000 result=40 02:47:36 Config A/D Result=40 02:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:36 Get A/D filter: -9.255963e+061 result=40 02:47:36 Get A/D value=-858993460 result=40 02:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:47:36 Aux= 02:47:36 Message to Camera, serial 206864 queued 02:47:45 Received message from Master: op=Shutter serial=206874 02:47:45 Shutter LASER close 02:47:45 Received message from Master: op=PointingHead serial=206878 02:47:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:47:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:47:45 Point started: ret=0 02:47:45 point_skyscan result=0 02:47:46 Check angles 02:47:46 SkyScan query 02:47:47 SkyScan query done: ret=0 az=89.76<-5984 ze=157.11<-1526 Statuses=0009 0009 02:47:47 Msec=0 True Az=89.76 Ze=157.11 Az status=0009 Ze status=0009 02:47:47 Check angles 02:47:47 SkyScan query 02:47:47 SkyScan query done: ret=0 az=72.225<-4815 ze=136.155<-2923 Statuses=0009 0009 02:47:47 Msec=750 True Az=72.225 Ze=136.155 Az status=0009 Ze status=0009 02:47:48 Check angles 02:47:48 SkyScan query 02:47:48 SkyScan query done: ret=0 az=54.915<-3661 ze=115.23<-4318 Statuses=0009 0009 02:47:48 Msec=1500 True Az=54.915 Ze=115.23 Az status=0009 Ze status=0009 02:47:48 Check angles 02:47:48 SkyScan query 02:47:49 SkyScan query done: ret=0 az=41.01<-2734 ze=94.23<-5718 Statuses=0009 0009 02:47:49 Msec=2250 True Az=41.01 Ze=94.23 Az status=0009 Ze status=0009 02:47:49 Check angles 02:47:49 SkyScan query 02:47:50 SkyScan query done: ret=0 az=40.98<-2732 ze=72.825<-7145 Statuses=0008 0009 02:47:50 Msec=3000 True Az=40.98 Ze=72.825 Az status=0008 Ze status=0009 02:47:50 Check angles 02:47:50 SkyScan query 02:47:50 SkyScan query done: ret=0 az=40.98<-2732 ze=52.485<-8501 Statuses=0008 0009 02:47:50 Msec=3750 True Az=40.98 Ze=52.485 Az status=0008 Ze status=0009 02:47:51 Check angles 02:47:51 SkyScan query 02:47:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:47:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:47:51 Message to Master queued w/err=0: serial=206878 error=0 02:47:56 Received message from Master: op=Filter serial=206879 02:47:56 Color wheel filter change from 0 to 0 02:47:56 FLIGetFilterPos err=0 currentPosition=0 02:47:56 FLIGetStepsRemaining err=0 RemainingSteps=0 02:47:56 Filter is already there-color wheel unchanged 02:47:56 Received message from Master: op=Shutter serial=206880 02:47:56 Shutter LASER close 02:47:57 Received message from Camera: op=State serial=206882 02:47:57 GetSingleValue result=40 Value=cccccccc 02:47:57 SkyScan query 02:47:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:47:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:57 Parameters OK 02:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:57 Set A/D data flow result=40 02:47:57 Set A/D channel type result=40 02:47:57 Set A/D encoding result=40 02:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:57 Set channel filter=0.000000e+000 result=40 02:47:57 Config A/D Result=40 02:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:57 Get A/D filter: -9.255963e+061 result=40 02:47:57 Get A/D value=-858993460 result=40 02:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:47:57 Parameters OK 02:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:47:57 Set A/D data flow result=40 02:47:57 Set A/D channel type result=40 02:47:57 Set A/D encoding result=40 02:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:47:57 Set channel filter=0.000000e+000 result=40 02:47:57 Config A/D Result=40 02:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:47:57 Get A/D filter: -9.255963e+061 result=40 02:47:57 Get A/D value=-858993460 result=40 02:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:47:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:47:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:47:57 Aux= 02:47:57 Message to Camera, serial 206882 queued 02:48:34 Received message from Master: op=PointingHead serial=206895 02:48:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:48:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:48:34 Point started: ret=0 02:48:34 point_skyscan result=0 02:48:35 Check angles 02:48:35 SkyScan query 02:48:36 SkyScan query done: ret=0 az=40.995<-2733 ze=21.795<-10547 Statuses=0008 0009 02:48:36 Msec=0 True Az=40.995 Ze=21.795 Az status=0008 Ze status=0009 02:48:36 Check angles 02:48:36 SkyScan query 02:48:37 SkyScan query done: ret=0 az=40.995<-2733 ze=0.825<-11945 Statuses=0008 0009 02:48:37 Msec=750 True Az=40.995 Ze=0.825 Az status=0008 Ze status=0009 02:48:37 Check angles 02:48:37 SkyScan query 02:48:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.1<-13340 Statuses=0008 0009 02:48:37 Msec=1500 True Az=40.995 Ze=-20.1 Az status=0008 Ze status=0009 02:48:37 Check angles 02:48:37 SkyScan query 02:48:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 02:48:38 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 02:48:38 Check angles 02:48:38 SkyScan query 02:48:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:48:39 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:48:39 Message to Master queued w/err=0: serial=206895 error=0 02:48:44 Received message from Master: op=Filter serial=206896 02:48:44 Color wheel filter change from 0 to 0 02:48:44 FLIGetFilterPos err=0 currentPosition=0 02:48:44 FLIGetStepsRemaining err=0 RemainingSteps=0 02:48:44 Filter is already there-color wheel unchanged 02:48:44 Received message from Master: op=Shutter serial=206897 02:48:44 Shutter LASER close 02:48:44 Received message from Camera: op=State serial=206899 02:48:44 GetSingleValue result=40 Value=cccccccc 02:48:44 SkyScan query 02:48:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:48:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:45 Parameters OK 02:48:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:45 Set A/D data flow result=40 02:48:45 Set A/D channel type result=40 02:48:45 Set A/D encoding result=40 02:48:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:45 Set channel filter=0.000000e+000 result=40 02:48:45 Config A/D Result=40 02:48:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:45 Get A/D filter: -9.255963e+061 result=40 02:48:45 Get A/D value=-858993460 result=40 02:48:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:48:45 Parameters OK 02:48:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:48:45 Set A/D data flow result=40 02:48:45 Set A/D channel type result=40 02:48:45 Set A/D encoding result=40 02:48:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:48:45 Set channel filter=0.000000e+000 result=40 02:48:45 Config A/D Result=40 02:48:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:48:45 Get A/D filter: -9.255963e+061 result=40 02:48:45 Get A/D value=-858993460 result=40 02:48:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:48:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:48:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:48:45 Aux= 02:48:45 Message to Camera, serial 206899 queued 02:49:21 Received message from Master: op=PointingHead serial=206912 02:49:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:49:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:49:22 Point started: ret=0 02:49:22 point_skyscan result=0 02:49:22 Check angles 02:49:22 SkyScan query 02:49:23 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.13<-16542 Statuses=0009 0009 02:49:23 Msec=0 True Az=63.825 Ze=-68.13 Az status=0009 Ze status=0009 02:49:23 Check angles 02:49:23 SkyScan query 02:49:24 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.55<-17970 Statuses=0009 0009 02:49:24 Msec=750 True Az=81.645 Ze=-89.55 Az status=0009 Ze status=0009 02:49:24 Check angles 02:49:24 SkyScan query 02:49:25 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.49<-19366 Statuses=0009 0009 02:49:25 Msec=1500 True Az=99.195 Ze=-110.49 Az status=0009 Ze status=0009 02:49:25 Check angles 02:49:25 SkyScan query 02:49:25 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.43<-20762 Statuses=0009 0009 02:49:25 Msec=2250 True Az=116.685 Ze=-131.43 Az status=0009 Ze status=0009 02:49:25 Check angles 02:49:25 SkyScan query 02:49:26 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.57<-21438 Statuses=0009 0008 02:49:26 Msec=3000 True Az=131.04 Ze=-141.57 Az status=0009 Ze status=0008 02:49:26 Check angles 02:49:26 SkyScan query 02:49:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:49:27 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:49:27 Message to Master queued w/err=0: serial=206912 error=0 02:49:32 Received message from Master: op=Filter serial=206913 02:49:32 Color wheel filter change from 0 to 0 02:49:32 FLIGetFilterPos err=0 currentPosition=0 02:49:32 FLIGetStepsRemaining err=0 RemainingSteps=0 02:49:32 Filter is already there-color wheel unchanged 02:49:32 Received message from Master: op=Shutter serial=206914 02:49:32 Shutter LASER close 02:49:32 Received message from Camera: op=State serial=206916 02:49:32 GetSingleValue result=40 Value=cccccccc 02:49:32 SkyScan query 02:49:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:49:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:33 Parameters OK 02:49:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:33 Set A/D data flow result=40 02:49:33 Set A/D channel type result=40 02:49:33 Set A/D encoding result=40 02:49:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:33 Set channel filter=0.000000e+000 result=40 02:49:33 Config A/D Result=40 02:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:33 Get A/D filter: -9.255963e+061 result=40 02:49:33 Get A/D value=-858993460 result=40 02:49:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:49:33 Parameters OK 02:49:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:49:33 Set A/D data flow result=40 02:49:33 Set A/D channel type result=40 02:49:33 Set A/D encoding result=40 02:49:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:49:33 Set channel filter=0.000000e+000 result=40 02:49:33 Config A/D Result=40 02:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:49:33 Get A/D filter: -9.255963e+061 result=40 02:49:33 Get A/D value=-858993460 result=40 02:49:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:49:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:49:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:49:33 Aux= 02:49:33 Message to Camera, serial 206916 queued 02:50:08 Received message from Master: op=PointingHead serial=206928 02:50:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:50:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:50:09 Point started: ret=0 02:50:09 point_skyscan result=0 02:50:10 Check angles 02:50:10 SkyScan query 02:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0009 0009 02:50:10 Msec=0 True Az=112.995 Ze=-171.315 Az status=0009 Ze status=0009 02:50:10 Check angles 02:50:10 SkyScan query 02:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 02:50:11 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 02:50:11 Message to Master queued w/err=0: serial=206928 error=0 02:50:16 Received message from Master: op=Filter serial=206929 02:50:16 Color wheel filter change from 0 to 0 02:50:16 FLIGetFilterPos err=0 currentPosition=0 02:50:16 FLIGetStepsRemaining err=0 RemainingSteps=0 02:50:16 Filter is already there-color wheel unchanged 02:50:16 Received message from Master: op=Shutter serial=206930 02:50:16 Shutter LASER open 02:50:16 Received message from Camera: op=State serial=206932 02:50:16 GetSingleValue result=40 Value=cccccccc 02:50:16 SkyScan query 02:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:50:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:17 Parameters OK 02:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:17 Set A/D data flow result=40 02:50:17 Set A/D channel type result=40 02:50:17 Set A/D encoding result=40 02:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:17 Set channel filter=0.000000e+000 result=40 02:50:17 Config A/D Result=40 02:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:17 Get A/D filter: -9.255963e+061 result=40 02:50:17 Get A/D value=-858993460 result=40 02:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:17 Parameters OK 02:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:17 Set A/D data flow result=40 02:50:17 Set A/D channel type result=40 02:50:17 Set A/D encoding result=40 02:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:17 Set channel filter=0.000000e+000 result=40 02:50:17 Config A/D Result=40 02:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:17 Get A/D filter: -9.255963e+061 result=40 02:50:17 Get A/D value=-858993460 result=40 02:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:50:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:50:17 Aux= 02:50:17 Message to Camera, serial 206932 queued 02:50:25 Received message from Master: op=Shutter serial=206942 02:50:25 Shutter LASER close 02:50:26 Received message from Master: op=PointingHead serial=206946 02:50:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:50:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:50:26 Point started: ret=0 02:50:26 point_skyscan result=0 02:50:27 Check angles 02:50:27 SkyScan query 02:50:28 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.115<-21541 Statuses=0009 0009 02:50:28 Msec=0 True Az=136.17 Ze=-143.115 Az status=0009 Ze status=0009 02:50:28 Check angles 02:50:28 SkyScan query 02:50:28 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.13<-20142 Statuses=0009 0009 02:50:28 Msec=750 True Az=153.525 Ze=-122.13 Az status=0009 Ze status=0009 02:50:28 Check angles 02:50:28 SkyScan query 02:50:29 SkyScan query done: ret=0 az=171.03<-11402 ze=-101.19<-18746 Statuses=0009 0009 02:50:29 Msec=1500 True Az=171.03 Ze=-101.19 Az status=0009 Ze status=0009 02:50:29 Check angles 02:50:29 SkyScan query 02:50:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.28<-17352 Statuses=0008 0009 02:50:30 Msec=2250 True Az=176.01 Ze=-80.28 Az status=0008 Ze status=0009 02:50:30 Check angles 02:50:30 SkyScan query 02:50:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.28<-15952 Statuses=0008 0009 02:50:31 Msec=3000 True Az=175.995 Ze=-59.28 Az status=0008 Ze status=0009 02:50:31 Check angles 02:50:31 SkyScan query 02:50:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:50:31 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:50:31 Message to Master queued w/err=0: serial=206946 error=0 02:50:36 Received message from Master: op=Filter serial=206947 02:50:36 Color wheel filter change from 0 to 0 02:50:36 FLIGetFilterPos err=0 currentPosition=0 02:50:36 FLIGetStepsRemaining err=0 RemainingSteps=0 02:50:36 Filter is already there-color wheel unchanged 02:50:36 Received message from Master: op=Shutter serial=206948 02:50:36 Shutter LASER close 02:50:37 Received message from Camera: op=State serial=206950 02:50:37 GetSingleValue result=40 Value=cccccccc 02:50:37 SkyScan query 02:50:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:50:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:37 Parameters OK 02:50:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:37 Set A/D data flow result=40 02:50:37 Set A/D channel type result=40 02:50:37 Set A/D encoding result=40 02:50:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:37 Set channel filter=0.000000e+000 result=40 02:50:37 Config A/D Result=40 02:50:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:37 Get A/D filter: -9.255963e+061 result=40 02:50:37 Get A/D value=-858993460 result=40 02:50:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:50:37 Parameters OK 02:50:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:50:37 Set A/D data flow result=40 02:50:37 Set A/D channel type result=40 02:50:37 Set A/D encoding result=40 02:50:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:50:37 Set channel filter=0.000000e+000 result=40 02:50:37 Config A/D Result=40 02:50:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:50:37 Get A/D filter: -9.255963e+061 result=40 02:50:37 Get A/D value=-858993460 result=40 02:50:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:50:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:50:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:50:37 Aux= 02:50:37 Message to Camera, serial 206950 queued 02:51:14 Received message from Master: op=PointingHead serial=206963 02:51:14 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:51:14 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:51:14 Point started: ret=0 02:51:14 point_skyscan result=0 02:51:15 Check angles 02:51:15 SkyScan query 02:51:16 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.63<-13442 Statuses=0009 0009 02:51:16 Msec=0 True Az=152.775 Ze=-21.63 Az status=0009 Ze status=0009 02:51:16 Check angles 02:51:16 SkyScan query 02:51:16 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.645<-12043 Statuses=0009 0009 02:51:16 Msec=750 True Az=135.405 Ze=-0.645 Az status=0009 Ze status=0009 02:51:17 Check angles 02:51:17 SkyScan query 02:51:17 SkyScan query done: ret=0 az=117.51<-7834 ze=20.775<-10615 Statuses=0009 0009 02:51:17 Msec=1500 True Az=117.51 Ze=20.775 Az status=0009 Ze status=0009 02:51:17 Check angles 02:51:17 SkyScan query 02:51:18 SkyScan query done: ret=0 az=100.2<-6680 ze=41.715<-9219 Statuses=0009 0009 02:51:18 Msec=2250 True Az=100.2 Ze=41.715 Az status=0009 Ze status=0009 02:51:18 Check angles 02:51:18 SkyScan query 02:51:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 02:51:19 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 02:51:19 Check angles 02:51:19 SkyScan query 02:51:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 02:51:19 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 02:51:19 Message to Master queued w/err=0: serial=206963 error=0 02:51:24 Received message from Master: op=Filter serial=206964 02:51:24 Color wheel filter change from 0 to 0 02:51:24 FLIGetFilterPos err=0 currentPosition=0 02:51:24 FLIGetStepsRemaining err=0 RemainingSteps=0 02:51:24 Filter is already there-color wheel unchanged 02:51:25 Received message from Master: op=Shutter serial=206965 02:51:25 Shutter LASER close 02:51:25 Received message from Camera: op=State serial=206967 02:51:25 GetSingleValue result=40 Value=cccccccc 02:51:25 SkyScan query 02:51:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:51:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:25 Parameters OK 02:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:25 Set A/D data flow result=40 02:51:25 Set A/D channel type result=40 02:51:25 Set A/D encoding result=40 02:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:25 Set channel filter=0.000000e+000 result=40 02:51:25 Config A/D Result=40 02:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:25 Get A/D filter: -9.255963e+061 result=40 02:51:25 Get A/D value=-858993460 result=40 02:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:51:25 Parameters OK 02:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:51:25 Set A/D data flow result=40 02:51:25 Set A/D channel type result=40 02:51:25 Set A/D encoding result=40 02:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:51:25 Set channel filter=0.000000e+000 result=40 02:51:25 Config A/D Result=40 02:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:51:25 Get A/D filter: -9.255963e+061 result=40 02:51:25 Get A/D value=-858993460 result=40 02:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:51:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:51:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:51:25 Aux= 02:51:25 Message to Camera, serial 206967 queued 02:52:02 Received message from Master: op=PointingHead serial=206980 02:52:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 02:52:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 02:52:03 Point started: ret=0 02:52:03 point_skyscan result=0 02:52:03 Check angles 02:52:03 SkyScan query 02:52:04 SkyScan query done: ret=0 az=108.9<-7260 ze=38.49<-9434 Statuses=0009 0008 02:52:04 Msec=0 True Az=108.9 Ze=38.49 Az status=0009 Ze status=0008 02:52:04 Check angles 02:52:04 SkyScan query 02:52:05 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 02:52:05 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 02:52:05 Check angles 02:52:05 SkyScan query 02:52:05 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 02:52:05 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 02:52:06 Check angles 02:52:06 SkyScan query 02:52:06 SkyScan query done: ret=0 az=162.06<-10804 ze=38.505<-9433 Statuses=0009 0008 02:52:06 Msec=2250 True Az=162.06 Ze=38.505 Az status=0009 Ze status=0008 02:52:06 Check angles 02:52:06 SkyScan query 02:52:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 02:52:07 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 02:52:07 Check angles 02:52:07 SkyScan query 02:52:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 02:52:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 02:52:08 Message to Master queued w/err=0: serial=206980 error=0 02:52:13 Received message from Master: op=Filter serial=206981 02:52:13 Color wheel filter change from 0 to 0 02:52:13 FLIGetFilterPos err=0 currentPosition=0 02:52:13 FLIGetStepsRemaining err=0 RemainingSteps=0 02:52:13 Filter is already there-color wheel unchanged 02:52:13 Received message from Master: op=Shutter serial=206982 02:52:13 Shutter LASER close 02:52:13 Received message from Camera: op=State serial=206984 02:52:13 GetSingleValue result=40 Value=cccccccc 02:52:13 SkyScan query 02:52:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 02:52:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:13 Parameters OK 02:52:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:13 Set A/D data flow result=40 02:52:13 Set A/D channel type result=40 02:52:13 Set A/D encoding result=40 02:52:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:13 Set channel filter=0.000000e+000 result=40 02:52:13 Config A/D Result=40 02:52:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:13 Get A/D filter: -9.255963e+061 result=40 02:52:13 Get A/D value=-858993460 result=40 02:52:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:52:13 Parameters OK 02:52:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:52:13 Set A/D data flow result=40 02:52:13 Set A/D channel type result=40 02:52:13 Set A/D encoding result=40 02:52:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:52:13 Set channel filter=0.000000e+000 result=40 02:52:13 Config A/D Result=40 02:52:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:52:13 Get A/D filter: -9.255963e+061 result=40 02:52:13 Get A/D value=-858993460 result=40 02:52:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:52:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:52:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:52:13 Aux= 02:52:13 Message to Camera, serial 206984 queued 02:52:50 Received message from Master: op=PointingHead serial=206997 02:52:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:52:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:52:51 Point started: ret=0 02:52:51 point_skyscan result=0 02:52:51 Check angles 02:52:51 SkyScan query 02:52:52 SkyScan query done: ret=0 az=152.685<-10179 ze=8.205<-11453 Statuses=0009 0009 02:52:52 Msec=0 True Az=152.685 Ze=8.205 Az status=0009 Ze status=0009 02:52:52 Check angles 02:52:52 SkyScan query 02:52:53 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.66<-12844 Statuses=0009 0009 02:52:53 Msec=750 True Az=135.18 Ze=-12.66 Az status=0009 Ze status=0009 02:52:53 Check angles 02:52:53 SkyScan query 02:52:53 SkyScan query done: ret=0 az=117.165<-7811 ze=-34.185<-14279 Statuses=0009 0009 02:52:53 Msec=1500 True Az=117.165 Ze=-34.185 Az status=0009 Ze status=0009 02:52:54 Check angles 02:52:54 SkyScan query 02:52:54 SkyScan query done: ret=0 az=99.885<-6659 ze=-51.57<-15438 Statuses=0009 0009 02:52:54 Msec=2250 True Az=99.885 Ze=-51.57 Az status=0009 Ze status=0009 02:52:54 Check angles 02:52:54 SkyScan query 02:52:55 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 02:52:55 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 02:52:55 Check angles 02:52:55 SkyScan query 02:52:56 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 02:52:56 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 02:52:56 Message to Master queued w/err=0: serial=206997 error=0 02:53:01 Received message from Master: op=Filter serial=206998 02:53:01 Color wheel filter change from 0 to 0 02:53:01 FLIGetFilterPos err=0 currentPosition=0 02:53:01 FLIGetStepsRemaining err=0 RemainingSteps=0 02:53:01 Filter is already there-color wheel unchanged 02:53:01 Received message from Master: op=Shutter serial=206999 02:53:01 Shutter LASER close 02:53:01 Received message from Camera: op=State serial=207001 02:53:01 GetSingleValue result=40 Value=cccccccc 02:53:01 SkyScan query 02:53:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:53:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:02 Parameters OK 02:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:02 Set A/D data flow result=40 02:53:02 Set A/D channel type result=40 02:53:02 Set A/D encoding result=40 02:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:02 Set channel filter=0.000000e+000 result=40 02:53:02 Config A/D Result=40 02:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:02 Get A/D filter: -9.255963e+061 result=40 02:53:02 Get A/D value=-858993460 result=40 02:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:02 Parameters OK 02:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:02 Set A/D data flow result=40 02:53:02 Set A/D channel type result=40 02:53:02 Set A/D encoding result=40 02:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:02 Set channel filter=0.000000e+000 result=40 02:53:02 Config A/D Result=40 02:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:02 Get A/D filter: -9.255963e+061 result=40 02:53:02 Get A/D value=-858993460 result=40 02:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:53:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:53:02 Aux= 02:53:02 Message to Camera, serial 207001 queued 02:53:38 Received message from Master: op=PointingHead serial=207014 02:53:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:53:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:53:39 Point started: ret=0 02:53:39 point_skyscan result=0 02:53:39 Check angles 02:53:39 SkyScan query 02:53:40 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.765<-17451 Statuses=0009 0009 02:53:40 Msec=0 True Az=109.395 Ze=-81.765 Az status=0009 Ze status=0009 02:53:40 Check angles 02:53:40 SkyScan query 02:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.705<-18847 Statuses=0008 0009 02:53:41 Msec=750 True Az=112.995 Ze=-102.705 Az status=0008 Ze status=0009 02:53:41 Check angles 02:53:41 SkyScan query 02:53:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 02:53:42 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 02:53:42 Check angles 02:53:42 SkyScan query 02:53:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 02:53:42 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 02:53:42 Check angles 02:53:42 SkyScan query 02:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.525<-23035 Statuses=0008 0009 02:53:43 Msec=3000 True Az=112.995 Ze=-165.525 Az status=0008 Ze status=0009 02:53:43 Check angles 02:53:43 SkyScan query 02:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 02:53:44 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 02:53:44 Message to Master queued w/err=0: serial=207014 error=0 02:53:49 Received message from Master: op=Filter serial=207015 02:53:49 Color wheel filter change from 0 to 0 02:53:49 FLIGetFilterPos err=0 currentPosition=0 02:53:49 FLIGetStepsRemaining err=0 RemainingSteps=0 02:53:49 Filter is already there-color wheel unchanged 02:53:49 Received message from Master: op=Shutter serial=207016 02:53:49 Shutter LASER open 02:53:49 Received message from Camera: op=State serial=207018 02:53:49 GetSingleValue result=40 Value=cccccccc 02:53:49 SkyScan query 02:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:53:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:50 Parameters OK 02:53:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:50 Set A/D data flow result=40 02:53:50 Set A/D channel type result=40 02:53:50 Set A/D encoding result=40 02:53:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:50 Set channel filter=0.000000e+000 result=40 02:53:50 Config A/D Result=40 02:53:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:50 Get A/D filter: -9.255963e+061 result=40 02:53:50 Get A/D value=-858993460 result=40 02:53:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:53:50 Parameters OK 02:53:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:53:50 Set A/D data flow result=40 02:53:50 Set A/D channel type result=40 02:53:50 Set A/D encoding result=40 02:53:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:53:50 Set channel filter=0.000000e+000 result=40 02:53:50 Config A/D Result=40 02:53:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:53:50 Get A/D filter: -9.255963e+061 result=40 02:53:50 Get A/D value=-858993460 result=40 02:53:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:53:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:53:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:53:50 Aux= 02:53:50 Message to Camera, serial 207018 queued 02:53:58 Received message from Master: op=Shutter serial=207028 02:53:58 Shutter LASER close 02:53:59 Received message from Master: op=PointingHead serial=207032 02:53:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:53:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:53:59 Point started: ret=0 02:53:59 point_skyscan result=0 02:54:00 Check angles 02:54:00 SkyScan query 02:54:00 SkyScan query done: ret=0 az=89.595<-5973 ze=157.005<-1533 Statuses=0009 0009 02:54:00 Msec=0 True Az=89.595 Ze=157.005 Az status=0009 Ze status=0009 02:54:00 Check angles 02:54:00 SkyScan query 02:54:01 SkyScan query done: ret=0 az=71.73<-4782 ze=135.45<-2970 Statuses=0009 0009 02:54:01 Msec=750 True Az=71.73 Ze=135.45 Az status=0009 Ze status=0009 02:54:01 Check angles 02:54:01 SkyScan query 02:54:02 SkyScan query done: ret=0 az=54.405<-3627 ze=114.585<-4361 Statuses=0009 0009 02:54:02 Msec=1500 True Az=54.405 Ze=114.585 Az status=0009 Ze status=0009 02:54:02 Check angles 02:54:02 SkyScan query 02:54:03 SkyScan query done: ret=0 az=41.01<-2734 ze=93.645<-5757 Statuses=0009 0009 02:54:03 Msec=2250 True Az=41.01 Ze=93.645 Az status=0009 Ze status=0009 02:54:03 Check angles 02:54:03 SkyScan query 02:54:03 SkyScan query done: ret=0 az=40.98<-2732 ze=72.3<-7180 Statuses=0008 0009 02:54:03 Msec=3000 True Az=40.98 Ze=72.3 Az status=0008 Ze status=0009 02:54:04 Check angles 02:54:04 SkyScan query 02:54:04 SkyScan query done: ret=0 az=40.98<-2732 ze=52.005<-8533 Statuses=0008 0009 02:54:04 Msec=3750 True Az=40.98 Ze=52.005 Az status=0008 Ze status=0009 02:54:04 Check angles 02:54:04 SkyScan query 02:54:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:54:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:54:05 Message to Master queued w/err=0: serial=207032 error=0 02:54:10 Received message from Master: op=Filter serial=207033 02:54:10 Color wheel filter change from 0 to 0 02:54:10 FLIGetFilterPos err=0 currentPosition=0 02:54:10 FLIGetStepsRemaining err=0 RemainingSteps=0 02:54:10 Filter is already there-color wheel unchanged 02:54:10 Received message from Master: op=Shutter serial=207034 02:54:10 Shutter LASER close 02:54:10 Received message from Camera: op=State serial=207036 02:54:10 GetSingleValue result=40 Value=cccccccc 02:54:10 SkyScan query 02:54:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:54:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:11 Parameters OK 02:54:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:11 Set A/D data flow result=40 02:54:11 Set A/D channel type result=40 02:54:11 Set A/D encoding result=40 02:54:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:11 Set channel filter=0.000000e+000 result=40 02:54:11 Config A/D Result=40 02:54:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:11 Get A/D filter: -9.255963e+061 result=40 02:54:11 Get A/D value=-858993460 result=40 02:54:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:11 Parameters OK 02:54:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:11 Set A/D data flow result=40 02:54:11 Set A/D channel type result=40 02:54:11 Set A/D encoding result=40 02:54:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:11 Set channel filter=0.000000e+000 result=40 02:54:11 Config A/D Result=40 02:54:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:11 Get A/D filter: -9.255963e+061 result=40 02:54:11 Get A/D value=-858993460 result=40 02:54:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:54:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:54:11 Aux= 02:54:11 Message to Camera, serial 207036 queued 02:54:48 Received message from Master: op=PointingHead serial=207049 02:54:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 02:54:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 02:54:48 Point started: ret=0 02:54:48 point_skyscan result=0 02:54:49 Check angles 02:54:49 SkyScan query 02:54:49 SkyScan query done: ret=0 az=40.995<-2733 ze=21.855<-10543 Statuses=0008 0009 02:54:49 Msec=0 True Az=40.995 Ze=21.855 Az status=0008 Ze status=0009 02:54:50 Check angles 02:54:50 SkyScan query 02:54:50 SkyScan query done: ret=0 az=40.995<-2733 ze=0.9<-11940 Statuses=0008 0009 02:54:50 Msec=750 True Az=40.995 Ze=0.9 Az status=0008 Ze status=0009 02:54:50 Check angles 02:54:50 SkyScan query 02:54:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.04<-13336 Statuses=0008 0009 02:54:51 Msec=1500 True Az=40.995 Ze=-20.04 Az status=0008 Ze status=0009 02:54:51 Check angles 02:54:51 SkyScan query 02:54:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 02:54:52 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 02:54:52 Check angles 02:54:52 SkyScan query 02:54:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 02:54:52 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 02:54:52 Message to Master queued w/err=0: serial=207049 error=0 02:54:57 Received message from Master: op=Filter serial=207050 02:54:57 Color wheel filter change from 0 to 0 02:54:57 FLIGetFilterPos err=0 currentPosition=0 02:54:57 FLIGetStepsRemaining err=0 RemainingSteps=0 02:54:57 Filter is already there-color wheel unchanged 02:54:58 Received message from Master: op=Shutter serial=207051 02:54:58 Shutter LASER close 02:54:58 Received message from Camera: op=State serial=207053 02:54:58 GetSingleValue result=40 Value=cccccccc 02:54:58 SkyScan query 02:54:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 02:54:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:58 Parameters OK 02:54:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:58 Set A/D data flow result=40 02:54:58 Set A/D channel type result=40 02:54:58 Set A/D encoding result=40 02:54:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:58 Set channel filter=0.000000e+000 result=40 02:54:58 Config A/D Result=40 02:54:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:58 Get A/D filter: -9.255963e+061 result=40 02:54:58 Get A/D value=-858993460 result=40 02:54:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:54:58 Parameters OK 02:54:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:54:58 Set A/D data flow result=40 02:54:58 Set A/D channel type result=40 02:54:58 Set A/D encoding result=40 02:54:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:54:58 Set channel filter=0.000000e+000 result=40 02:54:58 Config A/D Result=40 02:54:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:54:58 Get A/D filter: -9.255963e+061 result=40 02:54:58 Get A/D value=-858993460 result=40 02:54:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:54:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:54:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:54:58 Aux= 02:54:58 Message to Camera, serial 207053 queued 02:55:34 Received message from Master: op=PointingHead serial=207065 02:55:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 02:55:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 02:55:34 Point started: ret=0 02:55:34 point_skyscan result=0 02:55:35 Check angles 02:55:35 SkyScan query 02:55:36 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.13<-16542 Statuses=0009 0009 02:55:36 Msec=0 True Az=63.9 Ze=-68.13 Az status=0009 Ze status=0009 02:55:36 Check angles 02:55:36 SkyScan query 02:55:37 SkyScan query done: ret=0 az=81.27<-5418 ze=-89.1<-17940 Statuses=0009 0009 02:55:37 Msec=750 True Az=81.27 Ze=-89.1 Az status=0009 Ze status=0009 02:55:37 Check angles 02:55:37 SkyScan query 02:55:37 SkyScan query done: ret=0 az=98.805<-6587 ze=-110.025<-19335 Statuses=0009 0009 02:55:37 Msec=1500 True Az=98.805 Ze=-110.025 Az status=0009 Ze status=0009 02:55:37 Check angles 02:55:37 SkyScan query 02:55:38 SkyScan query done: ret=0 az=116.19<-7746 ze=-131.025<-20735 Statuses=0009 0009 02:55:38 Msec=2250 True Az=116.19 Ze=-131.025 Az status=0009 Ze status=0009 02:55:38 Check angles 02:55:38 SkyScan query 02:55:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 02:55:39 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 02:55:39 Check angles 02:55:39 SkyScan query 02:55:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 02:55:40 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 02:55:40 Message to Master queued w/err=0: serial=207065 error=0 02:55:45 Received message from Master: op=Filter serial=207066 02:55:45 Color wheel filter change from 0 to 0 02:55:45 FLIGetFilterPos err=0 currentPosition=0 02:55:45 FLIGetStepsRemaining err=0 RemainingSteps=0 02:55:45 Filter is already there-color wheel unchanged 02:55:45 Received message from Master: op=Shutter serial=207067 02:55:45 Shutter LASER close 02:55:45 Received message from Camera: op=State serial=207069 02:55:45 GetSingleValue result=40 Value=cccccccc 02:55:45 SkyScan query 02:55:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 02:55:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:45 Parameters OK 02:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:45 Set A/D data flow result=40 02:55:45 Set A/D channel type result=40 02:55:45 Set A/D encoding result=40 02:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:45 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-17 02:55:45] 02:55:45 Config A/D Result=40 02:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:45 Get A/D filter: -9.255963e+061 result=40 02:55:45 Get A/D value=-858993460 result=40 02:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:55:45 Parameters OK 02:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:55:45 Set A/D data flow result=40 02:55:45 Set A/D channel type result=40 02:55:45 Set A/D encoding result=40 02:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:55:45 Set channel filter=0.000000e+000 result=40 02:55:45 Config A/D Result=40 02:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:55:45 Get A/D filter: -9.255963e+061 result=40 02:55:45 Get A/D value=-858993460 result=40 02:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:55:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:55:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:55:45 Aux= 02:55:45 Message to Camera, serial 207069 queued [UTC 2018-12-17 02:55:52] 02:56:22 Received message from Master: op=PointingHead serial=207082 02:56:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:56:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:56:22 Point started: ret=0 02:56:22 point_skyscan result=0 02:56:23 Check angles 02:56:23 SkyScan query 02:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0009 0009 02:56:24 Msec=0 True Az=112.995 Ze=-171.105 Az status=0009 Ze status=0009 02:56:24 Check angles 02:56:24 SkyScan query 02:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:56:25 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:56:25 Message to Master queued w/err=0: serial=207082 error=0 02:56:30 Received message from Master: op=Filter serial=207083 02:56:30 Color wheel filter change from 0 to 0 02:56:30 FLIGetFilterPos err=0 currentPosition=0 02:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 02:56:30 Filter is already there-color wheel unchanged 02:56:30 Received message from Master: op=Shutter serial=207084 02:56:30 Shutter LASER open 02:56:30 Received message from Camera: op=State serial=207086 02:56:30 GetSingleValue result=40 Value=cccccccc 02:56:30 SkyScan query 02:56:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:56:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:30 Parameters OK 02:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:30 Set A/D data flow result=40 02:56:30 Set A/D channel type result=40 02:56:30 Set A/D encoding result=40 02:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:30 Set channel filter=0.000000e+000 result=40 02:56:30 Config A/D Result=40 02:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:30 Get A/D filter: -9.255963e+061 result=40 02:56:30 Get A/D value=-858993460 result=40 02:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:30 Parameters OK 02:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:30 Set A/D data flow result=40 02:56:30 Set A/D channel type result=40 02:56:30 Set A/D encoding result=40 02:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:30 Set channel filter=0.000000e+000 result=40 02:56:30 Config A/D Result=40 02:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:30 Get A/D filter: -9.255963e+061 result=40 02:56:30 Get A/D value=-858993460 result=40 02:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:56:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:56:30 Aux= 02:56:30 Message to Camera, serial 207086 queued 02:56:39 Received message from Master: op=Shutter serial=207096 02:56:39 Shutter LASER close 02:56:40 Received message from Master: op=PointingHead serial=207100 02:56:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 02:56:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 02:56:40 Point started: ret=0 02:56:40 point_skyscan result=0 02:56:41 Check angles 02:56:41 SkyScan query 02:56:41 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.34<-21556 Statuses=0009 0009 02:56:41 Msec=0 True Az=135.9 Ze=-143.34 Az status=0009 Ze status=0009 02:56:41 Check angles 02:56:41 SkyScan query 02:56:42 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.355<-20157 Statuses=0009 0009 02:56:42 Msec=750 True Az=153.51 Ze=-122.355 Az status=0009 Ze status=0009 02:56:42 Check angles 02:56:42 SkyScan query 02:56:43 SkyScan query done: ret=0 az=170.88<-11392 ze=-101.43<-18762 Statuses=0009 0009 02:56:43 Msec=1500 True Az=170.88 Ze=-101.43 Az status=0009 Ze status=0009 02:56:43 Check angles 02:56:43 SkyScan query 02:56:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.055<-17337 Statuses=0008 0009 02:56:43 Msec=2250 True Az=176.01 Ze=-80.055 Az status=0008 Ze status=0009 02:56:44 Check angles 02:56:44 SkyScan query 02:56:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 02:56:44 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 02:56:44 Check angles 02:56:44 SkyScan query 02:56:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 02:56:45 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 02:56:45 Message to Master queued w/err=0: serial=207100 error=0 02:56:50 Received message from Master: op=Filter serial=207101 02:56:50 Color wheel filter change from 0 to 0 02:56:50 FLIGetFilterPos err=0 currentPosition=0 02:56:50 FLIGetStepsRemaining err=0 RemainingSteps=0 02:56:50 Filter is already there-color wheel unchanged 02:56:50 Received message from Master: op=Shutter serial=207102 02:56:50 Shutter LASER close 02:56:50 Received message from Camera: op=State serial=207104 02:56:50 GetSingleValue result=40 Value=cccccccc 02:56:50 SkyScan query 02:56:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 02:56:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:51 Parameters OK 02:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:51 Set A/D data flow result=40 02:56:51 Set A/D channel type result=40 02:56:51 Set A/D encoding result=40 02:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:51 Set channel filter=0.000000e+000 result=40 02:56:51 Config A/D Result=40 02:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:51 Get A/D filter: -9.255963e+061 result=40 02:56:51 Get A/D value=-858993460 result=40 02:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:56:51 Parameters OK 02:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:56:51 Set A/D data flow result=40 02:56:51 Set A/D channel type result=40 02:56:51 Set A/D encoding result=40 02:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:56:51 Set channel filter=0.000000e+000 result=40 02:56:51 Config A/D Result=40 02:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:56:51 Get A/D filter: -9.255963e+061 result=40 02:56:51 Get A/D value=-858993460 result=40 02:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:56:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:56:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:56:51 Aux= 02:56:51 Message to Camera, serial 207104 queued 02:57:28 Received message from Master: op=PointingHead serial=207117 02:57:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 02:57:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 02:57:28 Point started: ret=0 02:57:28 point_skyscan result=0 02:57:29 Check angles 02:57:29 SkyScan query 02:57:29 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.93<-13462 Statuses=0009 0009 02:57:29 Msec=0 True Az=152.985 Ze=-21.93 Az status=0009 Ze status=0009 02:57:30 Check angles 02:57:30 SkyScan query 02:57:30 SkyScan query done: ret=0 az=135.48<-9032 ze=-0.96<-12064 Statuses=0009 0009 02:57:30 Msec=750 True Az=135.48 Ze=-0.96 Az status=0009 Ze status=0009 02:57:30 Check angles 02:57:30 SkyScan query 02:57:31 SkyScan query done: ret=0 az=117.96<-7864 ze=19.98<-10668 Statuses=0009 0009 02:57:31 Msec=1500 True Az=117.96 Ze=19.98 Az status=0009 Ze status=0009 02:57:31 Check angles 02:57:31 SkyScan query 02:57:32 SkyScan query done: ret=0 az=100.245<-6683 ze=41.4<-9240 Statuses=0009 0009 02:57:32 Msec=2250 True Az=100.245 Ze=41.4 Az status=0009 Ze status=0009 02:57:32 Check angles 02:57:32 SkyScan query 02:57:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.585<-8561 Statuses=0009 0008 02:57:32 Msec=3000 True Az=85.995 Ze=51.585 Az status=0009 Ze status=0008 02:57:33 Check angles 02:57:33 SkyScan query 02:57:33 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 02:57:33 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 02:57:33 Message to Master queued w/err=0: serial=207117 error=0 02:57:38 Received message from Master: op=Filter serial=207118 02:57:38 Color wheel filter change from 0 to 0 02:57:38 FLIGetFilterPos err=0 currentPosition=0 02:57:38 FLIGetStepsRemaining err=0 RemainingSteps=0 02:57:38 Filter is already there-color wheel unchanged 02:57:38 Received message from Master: op=Shutter serial=207119 02:57:38 Shutter LASER close 02:57:38 Received message from Camera: op=State serial=207121 02:57:38 GetSingleValue result=40 Value=cccccccc 02:57:38 SkyScan query 02:57:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 02:57:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:39 Parameters OK 02:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:39 Set A/D data flow result=40 02:57:39 Set A/D channel type result=40 02:57:39 Set A/D encoding result=40 02:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:39 Set channel filter=0.000000e+000 result=40 02:57:39 Config A/D Result=40 02:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:39 Get A/D filter: -9.255963e+061 result=40 02:57:39 Get A/D value=-858993460 result=40 02:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:57:39 Parameters OK 02:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:57:39 Set A/D data flow result=40 02:57:39 Set A/D channel type result=40 02:57:39 Set A/D encoding result=40 02:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:57:39 Set channel filter=0.000000e+000 result=40 02:57:39 Config A/D Result=40 02:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:57:39 Get A/D filter: -9.255963e+061 result=40 02:57:39 Get A/D value=-858993460 result=40 02:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:57:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:57:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:57:39 Aux= 02:57:39 Message to Camera, serial 207121 queued 02:58:16 Received message from Master: op=PointingHead serial=207134 02:58:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 02:58:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 02:58:16 Point started: ret=0 02:58:16 point_skyscan result=0 02:58:17 Check angles 02:58:17 SkyScan query 02:58:18 SkyScan query done: ret=0 az=85.995<-5733 ze=21.6<-10560 Statuses=0008 0009 02:58:18 Msec=0 True Az=85.995 Ze=21.6 Az status=0008 Ze status=0009 02:58:18 Check angles 02:58:18 SkyScan query 02:58:18 SkyScan query done: ret=0 az=85.995<-5733 ze=0.675<-11955 Statuses=0008 0009 02:58:18 Msec=750 True Az=85.995 Ze=0.675 Az status=0008 Ze status=0009 02:58:19 Check angles 02:58:19 SkyScan query 02:58:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.745<-13383 Statuses=0008 0009 02:58:19 Msec=1500 True Az=85.995 Ze=-20.745 Az status=0008 Ze status=0009 02:58:19 Check angles 02:58:19 SkyScan query 02:58:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.67<-14778 Statuses=0008 0009 02:58:20 Msec=2250 True Az=85.995 Ze=-41.67 Az status=0008 Ze status=0009 02:58:20 Check angles 02:58:20 SkyScan query 02:58:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 02:58:21 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 02:58:21 Message to Master queued w/err=0: serial=207134 error=0 02:58:26 Received message from Master: op=Filter serial=207135 02:58:26 Color wheel filter change from 0 to 0 02:58:26 FLIGetFilterPos err=0 currentPosition=0 02:58:26 FLIGetStepsRemaining err=0 RemainingSteps=0 02:58:26 Filter is already there-color wheel unchanged 02:58:26 Received message from Master: op=Shutter serial=207136 02:58:26 Shutter LASER close 02:58:26 Received message from Camera: op=State serial=207138 02:58:26 GetSingleValue result=40 Value=cccccccc 02:58:26 SkyScan query 02:58:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 02:58:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:26 Parameters OK 02:58:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:26 Set A/D data flow result=40 02:58:26 Set A/D channel type result=40 02:58:26 Set A/D encoding result=40 02:58:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:26 Set channel filter=0.000000e+000 result=40 02:58:26 Config A/D Result=40 02:58:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:26 Get A/D filter: -9.255963e+061 result=40 02:58:26 Get A/D value=-858993460 result=40 02:58:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:58:26 Parameters OK 02:58:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:58:26 Set A/D data flow result=40 02:58:26 Set A/D channel type result=40 02:58:26 Set A/D encoding result=40 02:58:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:58:26 Set channel filter=0.000000e+000 result=40 02:58:26 Config A/D Result=40 02:58:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:58:26 Get A/D filter: -9.255963e+061 result=40 02:58:26 Get A/D value=-858993460 result=40 02:58:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:58:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:58:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:58:26 Aux= 02:58:26 Message to Camera, serial 207138 queued 02:59:03 Received message from Master: op=PointingHead serial=207151 02:59:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 02:59:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 02:59:04 Point started: ret=0 02:59:04 point_skyscan result=0 02:59:04 Check angles 02:59:04 SkyScan query 02:59:05 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.63<-17442 Statuses=0009 0009 02:59:05 Msec=0 True Az=109.335 Ze=-81.63 Az status=0009 Ze status=0009 02:59:05 Check angles 02:59:05 SkyScan query 02:59:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.005<-18867 Statuses=0008 0009 02:59:06 Msec=750 True Az=112.995 Ze=-103.005 Az status=0008 Ze status=0009 02:59:06 Check angles 02:59:06 SkyScan query 02:59:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.96<-20264 Statuses=0008 0009 02:59:06 Msec=1500 True Az=112.995 Ze=-123.96 Az status=0008 Ze status=0009 02:59:07 Check angles 02:59:07 SkyScan query 02:59:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.885<-21659 Statuses=0008 0009 02:59:07 Msec=2250 True Az=112.995 Ze=-144.885 Az status=0008 Ze status=0009 02:59:07 Check angles 02:59:07 SkyScan query 02:59:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 02:59:08 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 02:59:08 Check angles 02:59:08 SkyScan query 02:59:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 02:59:09 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 02:59:09 Message to Master queued w/err=0: serial=207151 error=0 02:59:14 Received message from Master: op=Filter serial=207152 02:59:14 Color wheel filter change from 0 to 0 02:59:14 FLIGetFilterPos err=0 currentPosition=0 02:59:14 FLIGetStepsRemaining err=0 RemainingSteps=0 02:59:14 Filter is already there-color wheel unchanged 02:59:14 Received message from Master: op=Shutter serial=207153 02:59:14 Shutter LASER open 02:59:14 Received message from Camera: op=State serial=207155 02:59:14 GetSingleValue result=40 Value=cccccccc 02:59:14 SkyScan query 02:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 02:59:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:15 Parameters OK 02:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:15 Set A/D data flow result=40 02:59:15 Set A/D channel type result=40 02:59:15 Set A/D encoding result=40 02:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:15 Set channel filter=0.000000e+000 result=40 02:59:15 Config A/D Result=40 02:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:15 Get A/D filter: -9.255963e+061 result=40 02:59:15 Get A/D value=-858993460 result=40 02:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:15 Parameters OK 02:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:15 Set A/D data flow result=40 02:59:15 Set A/D channel type result=40 02:59:15 Set A/D encoding result=40 02:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:15 Set channel filter=0.000000e+000 result=40 02:59:15 Config A/D Result=40 02:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:15 Get A/D filter: -9.255963e+061 result=40 02:59:15 Get A/D value=-858993460 result=40 02:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:59:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:59:15 Aux= 02:59:15 Message to Camera, serial 207155 queued 02:59:23 Received message from Master: op=Shutter serial=207165 02:59:23 Shutter LASER close 02:59:23 Received message from Master: op=PointingHead serial=207169 02:59:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 02:59:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 02:59:24 Point started: ret=0 02:59:24 point_skyscan result=0 02:59:25 Check angles 02:59:25 SkyScan query 02:59:25 SkyScan query done: ret=0 az=89.82<-5988 ze=157.185<-1521 Statuses=0009 0009 02:59:25 Msec=0 True Az=89.82 Ze=157.185 Az status=0009 Ze status=0009 02:59:25 Check angles 02:59:25 SkyScan query 02:59:26 SkyScan query done: ret=0 az=72.27<-4818 ze=136.215<-2919 Statuses=0009 0009 02:59:26 Msec=750 True Az=72.27 Ze=136.215 Az status=0009 Ze status=0009 02:59:26 Check angles 02:59:26 SkyScan query 02:59:27 SkyScan query done: ret=0 az=54.945<-3663 ze=115.305<-4313 Statuses=0009 0009 02:59:27 Msec=1500 True Az=54.945 Ze=115.305 Az status=0009 Ze status=0009 02:59:27 Check angles 02:59:27 SkyScan query 02:59:27 SkyScan query done: ret=0 az=41.01<-2734 ze=94.29<-5714 Statuses=0009 0009 02:59:27 Msec=2250 True Az=41.01 Ze=94.29 Az status=0009 Ze status=0009 02:59:28 Check angles 02:59:28 SkyScan query 02:59:28 SkyScan query done: ret=0 az=40.98<-2732 ze=73.32<-7112 Statuses=0008 0009 02:59:28 Msec=3000 True Az=40.98 Ze=73.32 Az status=0008 Ze status=0009 02:59:28 Check angles 02:59:28 SkyScan query 02:59:29 SkyScan query done: ret=0 az=40.98<-2732 ze=52.8<-8480 Statuses=0008 0009 02:59:29 Msec=3750 True Az=40.98 Ze=52.8 Az status=0008 Ze status=0009 02:59:29 Check angles 02:59:29 SkyScan query 02:59:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 02:59:30 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 02:59:30 Message to Master queued w/err=0: serial=207169 error=0 02:59:35 Received message from Master: op=Filter serial=207170 02:59:35 Color wheel filter change from 0 to 0 02:59:35 FLIGetFilterPos err=0 currentPosition=0 02:59:35 FLIGetStepsRemaining err=0 RemainingSteps=0 02:59:35 Filter is already there-color wheel unchanged 02:59:35 Received message from Master: op=Shutter serial=207171 02:59:35 Shutter LASER close 02:59:35 Received message from Camera: op=State serial=207173 02:59:35 GetSingleValue result=40 Value=cccccccc 02:59:35 SkyScan query 02:59:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 02:59:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:36 Parameters OK 02:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:36 Set A/D data flow result=40 02:59:36 Set A/D channel type result=40 02:59:36 Set A/D encoding result=40 02:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:36 Set channel filter=0.000000e+000 result=40 02:59:36 Config A/D Result=40 02:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:36 Get A/D filter: -9.255963e+061 result=40 02:59:36 Get A/D value=-858993460 result=40 02:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 02:59:36 Parameters OK 02:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 02:59:36 Set A/D data flow result=40 02:59:36 Set A/D channel type result=40 02:59:36 Set A/D encoding result=40 02:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 02:59:36 Set channel filter=0.000000e+000 result=40 02:59:36 Config A/D Result=40 02:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 02:59:36 Get A/D filter: -9.255963e+061 result=40 02:59:36 Get A/D value=-858993460 result=40 02:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 02:59:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 02:59:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 02:59:36 Aux= 02:59:36 Message to Camera, serial 207173 queued 03:00:13 Received message from Master: op=PointingHead serial=207186 03:00:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:00:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:00:13 Point started: ret=0 03:00:13 point_skyscan result=0 03:00:14 Check angles 03:00:14 SkyScan query 03:00:14 SkyScan query done: ret=0 az=40.995<-2733 ze=21.405<-10573 Statuses=0008 0009 03:00:14 Msec=0 True Az=40.995 Ze=21.405 Az status=0008 Ze status=0009 03:00:14 Check angles 03:00:14 SkyScan query 03:00:15 SkyScan query done: ret=0 az=41.01<-2734 ze=0.405<-11973 Statuses=0008 0009 03:00:15 Msec=750 True Az=41.01 Ze=0.405 Az status=0008 Ze status=0009 03:00:15 Check angles 03:00:15 SkyScan query 03:00:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.55<-13370 Statuses=0008 0009 03:00:16 Msec=1500 True Az=40.995 Ze=-20.55 Az status=0008 Ze status=0009 03:00:16 Check angles 03:00:16 SkyScan query 03:00:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 03:00:16 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 03:00:17 Check angles 03:00:17 SkyScan query 03:00:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:00:17 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:00:17 Message to Master queued w/err=0: serial=207186 error=0 03:00:22 Received message from Master: op=Filter serial=207187 03:00:22 Color wheel filter change from 0 to 0 03:00:22 FLIGetFilterPos err=0 currentPosition=0 03:00:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:00:22 Filter is already there-color wheel unchanged 03:00:22 Received message from Master: op=Shutter serial=207188 03:00:22 Shutter LASER close 03:00:22 Received message from Camera: op=State serial=207190 03:00:22 GetSingleValue result=40 Value=cccccccc 03:00:22 SkyScan query 03:00:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:00:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:23 Parameters OK 03:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:23 Set A/D data flow result=40 03:00:23 Set A/D channel type result=40 03:00:23 Set A/D encoding result=40 03:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:23 Set channel filter=0.000000e+000 result=40 03:00:23 Config A/D Result=40 03:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:23 Get A/D filter: -9.255963e+061 result=40 03:00:23 Get A/D value=-858993460 result=40 03:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:00:23 Parameters OK 03:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:00:23 Set A/D data flow result=40 03:00:23 Set A/D channel type result=40 03:00:23 Set A/D encoding result=40 03:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:00:23 Set channel filter=0.000000e+000 result=40 03:00:23 Config A/D Result=40 03:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:00:23 Get A/D filter: -9.255963e+061 result=40 03:00:23 Get A/D value=-858993460 result=40 03:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:00:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:00:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:00:23 Aux= 03:00:23 Message to Camera, serial 207190 queued 03:01:00 Received message from Master: op=PointingHead serial=207203 03:01:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:01:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:01:00 Point started: ret=0 03:01:00 point_skyscan result=0 03:01:01 Check angles 03:01:01 SkyScan query 03:01:02 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.865<-16591 Statuses=0009 0009 03:01:02 Msec=0 True Az=64.44 Ze=-68.865 Az status=0009 Ze status=0009 03:01:02 Check angles 03:01:02 SkyScan query 03:01:02 SkyScan query done: ret=0 az=81.975<-5465 ze=-89.805<-17987 Statuses=0009 0009 03:01:02 Msec=750 True Az=81.975 Ze=-89.805 Az status=0009 Ze status=0009 03:01:03 Check angles 03:01:03 SkyScan query 03:01:03 SkyScan query done: ret=0 az=99.465<-6631 ze=-110.805<-19387 Statuses=0009 0009 03:01:03 Msec=1500 True Az=99.465 Ze=-110.805 Az status=0009 Ze status=0009 03:01:03 Check angles 03:01:03 SkyScan query 03:01:04 SkyScan query done: ret=0 az=117.24<-7816 ze=-132.135<-20809 Statuses=0009 0009 03:01:04 Msec=2250 True Az=117.24 Ze=-132.135 Az status=0009 Ze status=0009 03:01:04 Check angles 03:01:04 SkyScan query 03:01:05 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.555<-21437 Statuses=0009 0008 03:01:05 Msec=3000 True Az=131.085 Ze=-141.555 Az status=0009 Ze status=0008 03:01:05 Check angles 03:01:05 SkyScan query 03:01:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:01:05 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:01:05 Message to Master queued w/err=0: serial=207203 error=0 03:01:10 Received message from Master: op=Filter serial=207204 03:01:10 Color wheel filter change from 0 to 0 03:01:10 FLIGetFilterPos err=0 currentPosition=0 03:01:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:01:10 Filter is already there-color wheel unchanged 03:01:11 Received message from Master: op=Shutter serial=207205 03:01:11 Shutter LASER close 03:01:11 Received message from Camera: op=State serial=207207 03:01:11 GetSingleValue result=40 Value=cccccccc 03:01:11 SkyScan query 03:01:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:01:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:11 Parameters OK 03:01:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:11 Set A/D data flow result=40 03:01:11 Set A/D channel type result=40 03:01:11 Set A/D encoding result=40 03:01:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:11 Set channel filter=0.000000e+000 result=40 03:01:11 Config A/D Result=40 03:01:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:11 Get A/D filter: -9.255963e+061 result=40 03:01:11 Get A/D value=-858993460 result=40 03:01:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:11 Parameters OK 03:01:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:11 Set A/D data flow result=40 03:01:11 Set A/D channel type result=40 03:01:11 Set A/D encoding result=40 03:01:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:11 Set channel filter=0.000000e+000 result=40 03:01:11 Config A/D Result=40 03:01:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:11 Get A/D filter: -9.255963e+061 result=40 03:01:11 Get A/D value=-858993460 result=40 03:01:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:01:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:01:11 Aux= 03:01:11 Message to Camera, serial 207207 queued 03:01:48 Received message from Master: op=PointingHead serial=207220 03:01:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:01:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:01:48 Point started: ret=0 03:01:48 point_skyscan result=0 03:01:49 Check angles 03:01:49 SkyScan query 03:01:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 03:01:50 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 03:01:50 Check angles 03:01:50 SkyScan query 03:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:01:50 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:01:50 Message to Master queued w/err=0: serial=207220 error=0 03:01:55 Received message from Master: op=Filter serial=207221 03:01:55 Color wheel filter change from 0 to 0 03:01:55 FLIGetFilterPos err=0 currentPosition=0 03:01:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:01:55 Filter is already there-color wheel unchanged 03:01:56 Received message from Master: op=Shutter serial=207222 03:01:56 Shutter LASER open 03:01:56 Received message from Camera: op=State serial=207224 03:01:56 GetSingleValue result=40 Value=cccccccc 03:01:56 SkyScan query 03:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:56 Parameters OK 03:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:56 Set A/D data flow result=40 03:01:56 Set A/D channel type result=40 03:01:56 Set A/D encoding result=40 03:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:56 Set channel filter=0.000000e+000 result=40 03:01:56 Config A/D Result=40 03:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:56 Get A/D filter: -9.255963e+061 result=40 03:01:56 Get A/D value=-858993460 result=40 03:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:01:56 Parameters OK 03:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:01:56 Set A/D data flow result=40 03:01:56 Set A/D channel type result=40 03:01:56 Set A/D encoding result=40 03:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:01:56 Set channel filter=0.000000e+000 result=40 03:01:56 Config A/D Result=40 03:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:01:56 Get A/D filter: -9.255963e+061 result=40 03:01:56 Get A/D value=-858993460 result=40 03:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:01:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:01:56 Aux= 03:01:56 Message to Camera, serial 207224 queued 03:02:05 Received message from Master: op=Shutter serial=207234 03:02:05 Shutter LASER close 03:02:05 Received message from Master: op=PointingHead serial=207238 03:02:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:02:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:02:06 Point started: ret=0 03:02:06 point_skyscan result=0 03:02:06 Check angles 03:02:06 SkyScan query 03:02:07 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.145<-21543 Statuses=0009 0009 03:02:07 Msec=0 True Az=136.17 Ze=-143.145 Az status=0009 Ze status=0009 03:02:07 Check angles 03:02:07 SkyScan query 03:02:08 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.115<-20141 Statuses=0009 0009 03:02:08 Msec=750 True Az=153.645 Ze=-122.115 Az status=0009 Ze status=0009 03:02:08 Check angles 03:02:08 SkyScan query 03:02:09 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.665<-18711 Statuses=0009 0009 03:02:09 Msec=1500 True Az=171.465 Ze=-100.665 Az status=0009 Ze status=0009 03:02:09 Check angles 03:02:09 SkyScan query 03:02:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.815<-17321 Statuses=0008 0009 03:02:09 Msec=2250 True Az=176.01 Ze=-79.815 Az status=0008 Ze status=0009 03:02:09 Check angles 03:02:09 SkyScan query 03:02:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.83<-15922 Statuses=0008 0009 03:02:10 Msec=3000 True Az=176.01 Ze=-58.83 Az status=0008 Ze status=0009 03:02:10 Check angles 03:02:10 SkyScan query 03:02:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:02:11 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:02:11 Message to Master queued w/err=0: serial=207238 error=0 03:02:16 Received message from Master: op=Filter serial=207239 03:02:16 Color wheel filter change from 0 to 0 03:02:16 FLIGetFilterPos err=0 currentPosition=0 03:02:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:02:16 Filter is already there-color wheel unchanged 03:02:16 Received message from Master: op=Shutter serial=207240 03:02:16 Shutter LASER close 03:02:16 Received message from Camera: op=State serial=207242 03:02:16 GetSingleValue result=40 Value=cccccccc 03:02:16 SkyScan query 03:02:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:02:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:17 Parameters OK 03:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:17 Set A/D data flow result=40 03:02:17 Set A/D channel type result=40 03:02:17 Set A/D encoding result=40 03:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:17 Set channel filter=0.000000e+000 result=40 03:02:17 Config A/D Result=40 03:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:17 Get A/D filter: -9.255963e+061 result=40 03:02:17 Get A/D value=-858993460 result=40 03:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:02:17 Parameters OK 03:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:02:17 Set A/D data flow result=40 03:02:17 Set A/D channel type result=40 03:02:17 Set A/D encoding result=40 03:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:02:17 Set channel filter=0.000000e+000 result=40 03:02:17 Config A/D Result=40 03:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:02:17 Get A/D filter: -9.255963e+061 result=40 03:02:17 Get A/D value=-858993460 result=40 03:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:02:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:02:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:02:17 Aux= 03:02:17 Message to Camera, serial 207242 queued 03:02:54 Received message from Master: op=PointingHead serial=207255 03:02:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:02:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:02:54 Point started: ret=0 03:02:54 point_skyscan result=0 03:02:55 Check angles 03:02:55 SkyScan query 03:02:55 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.6<-13440 Statuses=0009 0009 03:02:55 Msec=0 True Az=152.925 Ze=-21.6 Az status=0009 Ze status=0009 03:02:55 Check angles 03:02:55 SkyScan query 03:02:56 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.615<-12041 Statuses=0009 0009 03:02:56 Msec=750 True Az=135.45 Ze=-0.615 Az status=0009 Ze status=0009 03:02:56 Check angles 03:02:56 SkyScan query 03:02:57 SkyScan query done: ret=0 az=117.78<-7852 ze=20.31<-10646 Statuses=0009 0009 03:02:57 Msec=1500 True Az=117.78 Ze=20.31 Az status=0009 Ze status=0009 03:02:57 Check angles 03:02:57 SkyScan query 03:02:57 SkyScan query done: ret=0 az=100.425<-6695 ze=41.295<-9247 Statuses=0009 0009 03:02:57 Msec=2250 True Az=100.425 Ze=41.295 Az status=0009 Ze status=0009 03:02:58 Check angles 03:02:58 SkyScan query 03:02:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 03:02:58 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 03:02:58 Check angles 03:02:58 SkyScan query 03:02:59 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 03:02:59 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 03:02:59 Message to Master queued w/err=0: serial=207255 error=0 03:03:04 Received message from Master: op=Filter serial=207256 03:03:04 Color wheel filter change from 0 to 0 03:03:04 FLIGetFilterPos err=0 currentPosition=0 03:03:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:03:04 Filter is already there-color wheel unchanged 03:03:04 Received message from Master: op=Shutter serial=207257 03:03:04 Shutter LASER close 03:03:04 Received message from Camera: op=State serial=207259 03:03:04 GetSingleValue result=40 Value=cccccccc 03:03:04 SkyScan query 03:03:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:03:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:05 Parameters OK 03:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:05 Set A/D data flow result=40 03:03:05 Set A/D channel type result=40 03:03:05 Set A/D encoding result=40 03:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:05 Set channel filter=0.000000e+000 result=40 03:03:05 Config A/D Result=40 03:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:05 Get A/D filter: -9.255963e+061 result=40 03:03:05 Get A/D value=-858993460 result=40 03:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:05 Parameters OK 03:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:05 Set A/D data flow result=40 03:03:05 Set A/D channel type result=40 03:03:05 Set A/D encoding result=40 03:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:05 Set channel filter=0.000000e+000 result=40 03:03:05 Config A/D Result=40 03:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:05 Get A/D filter: -9.255963e+061 result=40 03:03:05 Get A/D value=-858993460 result=40 03:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:03:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:03:05 Aux= 03:03:05 Message to Camera, serial 207259 queued 03:03:42 Received message from Master: op=PointingHead serial=207272 03:03:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:03:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:03:42 Point started: ret=0 03:03:42 point_skyscan result=0 03:03:43 Check angles 03:03:43 SkyScan query 03:03:43 SkyScan query done: ret=0 az=85.995<-5733 ze=21.36<-10576 Statuses=0008 0009 03:03:43 Msec=0 True Az=85.995 Ze=21.36 Az status=0008 Ze status=0009 03:03:44 Check angles 03:03:44 SkyScan query 03:03:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.03<-12002 Statuses=0008 0009 03:03:44 Msec=750 True Az=85.995 Ze=-0.03 Az status=0008 Ze status=0009 03:03:44 Check angles 03:03:44 SkyScan query 03:03:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.97<-13398 Statuses=0008 0009 03:03:45 Msec=1500 True Az=85.995 Ze=-20.97 Az status=0008 Ze status=0009 03:03:45 Check angles 03:03:45 SkyScan query 03:03:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.375<-14825 Statuses=0008 0009 03:03:46 Msec=2250 True Az=85.995 Ze=-42.375 Az status=0008 Ze status=0009 03:03:46 Check angles 03:03:46 SkyScan query 03:03:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:03:46 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:03:46 Message to Master queued w/err=0: serial=207272 error=0 03:03:51 Received message from Master: op=Filter serial=207273 03:03:51 Color wheel filter change from 0 to 0 03:03:51 FLIGetFilterPos err=0 currentPosition=0 03:03:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:03:51 Filter is already there-color wheel unchanged 03:03:52 Received message from Master: op=Shutter serial=207274 03:03:52 Shutter LASER close 03:03:52 Received message from Camera: op=State serial=207276 03:03:52 GetSingleValue result=40 Value=cccccccc 03:03:52 SkyScan query 03:03:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:03:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:52 Parameters OK 03:03:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:52 Set A/D data flow result=40 03:03:52 Set A/D channel type result=40 03:03:52 Set A/D encoding result=40 03:03:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:52 Set channel filter=0.000000e+000 result=40 03:03:52 Config A/D Result=40 03:03:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:52 Get A/D filter: -9.255963e+061 result=40 03:03:52 Get A/D value=-858993460 result=40 03:03:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:03:52 Parameters OK 03:03:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:03:52 Set A/D data flow result=40 03:03:52 Set A/D channel type result=40 03:03:52 Set A/D encoding result=40 03:03:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:03:52 Set channel filter=0.000000e+000 result=40 03:03:52 Config A/D Result=40 03:03:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:03:52 Get A/D filter: -9.255963e+061 result=40 03:03:52 Get A/D value=-858993460 result=40 03:03:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:03:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:03:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:03:52 Aux= 03:03:52 Message to Camera, serial 207276 queued 03:04:29 Received message from Master: op=PointingHead serial=207289 03:04:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:04:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:04:29 Point started: ret=0 03:04:29 point_skyscan result=0 03:04:30 Check angles 03:04:30 SkyScan query 03:04:31 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.405<-17427 Statuses=0009 0009 03:04:31 Msec=0 True Az=109.11 Ze=-81.405 Az status=0009 Ze status=0009 03:04:31 Check angles 03:04:31 SkyScan query 03:04:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.36<-18824 Statuses=0008 0009 03:04:32 Msec=750 True Az=112.995 Ze=-102.36 Az status=0008 Ze status=0009 03:04:32 Check angles 03:04:32 SkyScan query 03:04:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.3<-20220 Statuses=0008 0009 03:04:32 Msec=1500 True Az=112.995 Ze=-123.3 Az status=0008 Ze status=0009 03:04:32 Check angles 03:04:32 SkyScan query 03:04:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.255<-21617 Statuses=0008 0009 03:04:33 Msec=2250 True Az=112.995 Ze=-144.255 Az status=0008 Ze status=0009 03:04:33 Check angles 03:04:33 SkyScan query 03:04:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.21<-23014 Statuses=0008 0009 03:04:34 Msec=3000 True Az=112.995 Ze=-165.21 Az status=0008 Ze status=0009 03:04:34 Check angles 03:04:34 SkyScan query 03:04:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:04:35 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:04:35 Message to Master queued w/err=0: serial=207289 error=0 03:04:40 Received message from Master: op=Filter serial=207290 03:04:40 Color wheel filter change from 0 to 0 03:04:40 FLIGetFilterPos err=0 currentPosition=0 03:04:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:04:40 Filter is already there-color wheel unchanged 03:04:40 Received message from Master: op=Shutter serial=207291 03:04:40 Shutter LASER open 03:04:40 Received message from Camera: op=State serial=207293 03:04:40 GetSingleValue result=40 Value=cccccccc 03:04:40 SkyScan query 03:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:04:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:40 Parameters OK 03:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:40 Set A/D data flow result=40 03:04:40 Set A/D channel type result=40 03:04:40 Set A/D encoding result=40 03:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:40 Set channel filter=0.000000e+000 result=40 03:04:40 Config A/D Result=40 03:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:40 Get A/D filter: -9.255963e+061 result=40 03:04:40 Get A/D value=-858993460 result=40 03:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:04:40 Parameters OK 03:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:04:40 Set A/D data flow result=40 03:04:40 Set A/D channel type result=40 03:04:40 Set A/D encoding result=40 03:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:04:40 Set channel filter=0.000000e+000 result=40 03:04:40 Config A/D Result=40 03:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:04:40 Get A/D filter: -9.255963e+061 result=40 03:04:40 Get A/D value=-858993460 result=40 03:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:04:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:04:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:04:40 Aux= 03:04:40 Message to Camera, serial 207293 queued 03:04:49 Received message from Master: op=Shutter serial=207303 03:04:49 Shutter LASER close 03:04:49 Received message from Master: op=PointingHead serial=207307 03:04:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:04:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:04:50 Point started: ret=0 03:04:50 point_skyscan result=0 03:04:50 Check angles 03:04:50 SkyScan query 03:04:51 SkyScan query done: ret=0 az=89.835<-5989 ze=157.11<-1526 Statuses=0009 0009 03:04:51 Msec=0 True Az=89.835 Ze=157.11 Az status=0009 Ze status=0009 03:04:51 Check angles 03:04:51 SkyScan query 03:04:52 SkyScan query done: ret=0 az=72.255<-4817 ze=136.155<-2923 Statuses=0009 0009 03:04:52 Msec=750 True Az=72.255 Ze=136.155 Az status=0009 Ze status=0009 03:04:52 Check angles 03:04:52 SkyScan query 03:04:52 SkyScan query done: ret=0 az=54.6<-3640 ze=114.72<-4352 Statuses=0009 0009 03:04:52 Msec=1500 True Az=54.6 Ze=114.72 Az status=0009 Ze status=0009 03:04:53 Check angles 03:04:53 SkyScan query 03:04:53 SkyScan query done: ret=0 az=41.025<-2735 ze=93.825<-5745 Statuses=0009 0009 03:04:53 Msec=2250 True Az=41.025 Ze=93.825 Az status=0009 Ze status=0009 03:04:53 Check angles 03:04:53 SkyScan query 03:04:54 SkyScan query done: ret=0 az=40.98<-2732 ze=72.81<-7146 Statuses=0008 0009 03:04:54 Msec=3000 True Az=40.98 Ze=72.81 Az status=0008 Ze status=0009 03:04:54 Check angles 03:04:54 SkyScan query 03:04:55 SkyScan query done: ret=0 az=40.98<-2732 ze=52.23<-8518 Statuses=0008 0009 03:04:55 Msec=3750 True Az=40.98 Ze=52.23 Az status=0008 Ze status=0009 03:04:55 Check angles 03:04:55 SkyScan query 03:04:55 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 03:04:55 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 03:04:55 Message to Master queued w/err=0: serial=207307 error=0 03:05:00 Received message from Master: op=Filter serial=207308 03:05:00 Color wheel filter change from 0 to 0 03:05:00 FLIGetFilterPos err=0 currentPosition=0 03:05:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:05:00 Filter is already there-color wheel unchanged 03:05:01 Received message from Master: op=Shutter serial=207309 03:05:01 Shutter LASER close 03:05:01 Received message from Camera: op=State serial=207311 03:05:01 GetSingleValue result=40 Value=cccccccc 03:05:01 SkyScan query 03:05:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:05:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:02 Parameters OK 03:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:02 Set A/D data flow result=40 03:05:02 Set A/D channel type result=40 03:05:02 Set A/D encoding result=40 03:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:02 Set channel filter=0.000000e+000 result=40 03:05:02 Config A/D Result=40 03:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:02 Get A/D filter: -9.255963e+061 result=40 03:05:02 Get A/D value=-858993460 result=40 03:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:02 Parameters OK 03:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:02 Set A/D data flow result=40 03:05:02 Set A/D channel type result=40 03:05:02 Set A/D encoding result=40 03:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:02 Set channel filter=0.000000e+000 result=40 03:05:02 Config A/D Result=40 03:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:02 Get A/D filter: -9.255963e+061 result=40 03:05:02 Get A/D value=-858993460 result=40 03:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:05:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:05:02 Aux= 03:05:02 Message to Camera, serial 207311 queued 03:05:38 Received message from Master: op=PointingHead serial=207323 03:05:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:05:38 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:05:38 Point started: ret=0 03:05:38 point_skyscan result=0 03:05:39 Check angles 03:05:39 SkyScan query 03:05:39 SkyScan query done: ret=0 az=40.995<-2733 ze=21.885<-10541 Statuses=0008 0009 03:05:39 Msec=0 True Az=40.995 Ze=21.885 Az status=0008 Ze status=0009 03:05:39 Check angles 03:05:39 SkyScan query 03:05:40 SkyScan query done: ret=0 az=41.01<-2734 ze=0.465<-11969 Statuses=0008 0009 03:05:40 Msec=750 True Az=41.01 Ze=0.465 Az status=0008 Ze status=0009 03:05:40 Check angles 03:05:40 SkyScan query 03:05:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.475<-13365 Statuses=0008 0009 03:05:41 Msec=1500 True Az=40.995 Ze=-20.475 Az status=0008 Ze status=0009 03:05:41 Check angles 03:05:41 SkyScan query 03:05:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:05:41 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:05:42 Check angles 03:05:42 SkyScan query 03:05:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:05:42 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:05:42 Message to Master queued w/err=0: serial=207323 error=0 03:05:47 Received message from Master: op=Filter serial=207324 03:05:47 Color wheel filter change from 0 to 0 03:05:47 FLIGetFilterPos err=0 currentPosition=0 03:05:47 FLIGetStepsRemaining err=0 RemainingSteps=0 03:05:47 Filter is already there-color wheel unchanged 03:05:47 Received message from Master: op=Shutter serial=207325 03:05:47 Shutter LASER close [UTC 2018-12-17 03:05:47] 03:05:47 Received message from Camera: op=State serial=207327 03:05:48 GetSingleValue result=40 Value=cccccccc 03:05:48 SkyScan query 03:05:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:05:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:48 Parameters OK 03:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:48 Set A/D data flow result=40 03:05:48 Set A/D channel type result=40 03:05:48 Set A/D encoding result=40 03:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:48 Set channel filter=0.000000e+000 result=40 03:05:48 Config A/D Result=40 03:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:48 Get A/D filter: -9.255963e+061 result=40 03:05:48 Get A/D value=-858993460 result=40 03:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:05:48 Parameters OK 03:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:05:48 Set A/D data flow result=40 03:05:48 Set A/D channel type result=40 03:05:48 Set A/D encoding result=40 03:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:05:48 Set channel filter=0.000000e+000 result=40 03:05:48 Config A/D Result=40 03:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:05:48 Get A/D filter: -9.255963e+061 result=40 03:05:48 Get A/D value=-858993460 result=40 03:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:05:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:05:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:05:48 Aux= 03:05:48 Message to Camera, serial 207327 queued 03:06:25 Received message from Master: op=PointingHead serial=207340 03:06:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:06:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:06:25 Point started: ret=0 03:06:25 point_skyscan result=0 03:06:26 Check angles 03:06:26 SkyScan query 03:06:27 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.505<-16567 Statuses=0009 0009 03:06:27 Msec=0 True Az=64.245 Ze=-68.505 Az status=0009 Ze status=0009 03:06:27 Check angles 03:06:27 SkyScan query 03:06:27 SkyScan query done: ret=0 az=82.2<-5480 ze=-89.895<-17993 Statuses=0009 0009 03:06:27 Msec=750 True Az=82.2 Ze=-89.895 Az status=0009 Ze status=0009 03:06:27 Check angles 03:06:27 SkyScan query 03:06:28 SkyScan query done: ret=0 az=99.645<-6643 ze=-110.91<-19394 Statuses=0009 0009 03:06:28 Msec=1500 True Az=99.645 Ze=-110.91 Az status=0009 Ze status=0009 03:06:28 Check angles 03:06:28 SkyScan query 03:06:29 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.79<-20786 Statuses=0009 0009 03:06:29 Msec=2250 True Az=117.03 Ze=-131.79 Az status=0009 Ze status=0009 03:06:29 Check angles 03:06:29 SkyScan query 03:06:30 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 03:06:30 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 03:06:30 Check angles 03:06:30 SkyScan query 03:06:30 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:06:30 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:06:30 Message to Master queued w/err=0: serial=207340 error=0 03:06:35 Received message from Master: op=Filter serial=207341 03:06:35 Color wheel filter change from 0 to 0 03:06:35 FLIGetFilterPos err=0 currentPosition=0 03:06:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:06:35 Filter is already there-color wheel unchanged 03:06:35 Received message from Master: op=Shutter serial=207342 03:06:35 Shutter LASER close 03:06:36 Received message from Camera: op=State serial=207344 03:06:36 GetSingleValue result=40 Value=cccccccc 03:06:36 SkyScan query 03:06:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:06:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:36 Parameters OK 03:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:36 Set A/D data flow result=40 03:06:36 Set A/D channel type result=40 03:06:36 Set A/D encoding result=40 03:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:36 Set channel filter=0.000000e+000 result=40 03:06:36 Config A/D Result=40 03:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:36 Get A/D filter: -9.255963e+061 result=40 03:06:36 Get A/D value=-858993460 result=40 03:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:06:36 Parameters OK 03:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:06:36 Set A/D data flow result=40 03:06:36 Set A/D channel type result=40 03:06:36 Set A/D encoding result=40 03:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:06:36 Set channel filter=0.000000e+000 result=40 03:06:36 Config A/D Result=40 03:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:06:36 Get A/D filter: -9.255963e+061 result=40 03:06:36 Get A/D value=-858993460 result=40 03:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:06:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:06:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:06:36 Aux= 03:06:36 Message to Camera, serial 207344 queued 03:07:13 Received message from Master: op=PointingHead serial=207357 03:07:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:07:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:07:13 Point started: ret=0 03:07:13 point_skyscan result=0 03:07:14 Check angles 03:07:14 SkyScan query 03:07:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 03:07:15 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 03:07:15 Check angles 03:07:15 SkyScan query 03:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:07:15 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:07:15 Message to Master queued w/err=0: serial=207357 error=0 03:07:20 Received message from Master: op=Filter serial=207358 03:07:20 Color wheel filter change from 0 to 0 03:07:20 FLIGetFilterPos err=0 currentPosition=0 03:07:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:07:20 Filter is already there-color wheel unchanged 03:07:21 Received message from Master: op=Shutter serial=207359 03:07:21 Shutter LASER open 03:07:21 Received message from Camera: op=State serial=207361 03:07:21 GetSingleValue result=40 Value=cccccccc 03:07:21 SkyScan query 03:07:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:07:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:21 Parameters OK 03:07:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:21 Set A/D data flow result=40 03:07:21 Set A/D channel type result=40 03:07:21 Set A/D encoding result=40 03:07:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:21 Set channel filter=0.000000e+000 result=40 03:07:21 Config A/D Result=40 03:07:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:21 Get A/D filter: -9.255963e+061 result=40 03:07:21 Get A/D value=-858993460 result=40 03:07:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:21 Parameters OK 03:07:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:21 Set A/D data flow result=40 03:07:21 Set A/D channel type result=40 03:07:21 Set A/D encoding result=40 03:07:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:21 Set channel filter=0.000000e+000 result=40 03:07:21 Config A/D Result=40 03:07:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:21 Get A/D filter: -9.255963e+061 result=40 03:07:21 Get A/D value=-858993460 result=40 03:07:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:07:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:07:21 Aux= 03:07:21 Message to Camera, serial 207361 queued 03:07:30 Received message from Master: op=Shutter serial=207371 03:07:30 Shutter LASER close 03:07:30 Received message from Master: op=PointingHead serial=207375 03:07:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:07:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:07:31 Point started: ret=0 03:07:31 point_skyscan result=0 03:07:31 Check angles 03:07:31 SkyScan query 03:07:32 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.815<-21521 Statuses=0009 0009 03:07:32 Msec=0 True Az=136.35 Ze=-142.815 Az status=0009 Ze status=0009 03:07:32 Check angles 03:07:32 SkyScan query 03:07:33 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.845<-20123 Statuses=0009 0009 03:07:33 Msec=750 True Az=153.765 Ze=-121.845 Az status=0009 Ze status=0009 03:07:33 Check angles 03:07:33 SkyScan query 03:07:33 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.83<-18722 Statuses=0009 0009 03:07:33 Msec=1500 True Az=171.27 Ze=-100.83 Az status=0009 Ze status=0009 03:07:34 Check angles 03:07:34 SkyScan query 03:07:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.98<-17332 Statuses=0008 0009 03:07:34 Msec=2250 True Az=176.01 Ze=-79.98 Az status=0008 Ze status=0009 03:07:34 Check angles 03:07:34 SkyScan query 03:07:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.98<-15932 Statuses=0008 0009 03:07:35 Msec=3000 True Az=175.995 Ze=-58.98 Az status=0008 Ze status=0009 03:07:35 Check angles 03:07:35 SkyScan query 03:07:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:07:36 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:07:36 Message to Master queued w/err=0: serial=207375 error=0 03:07:41 Received message from Master: op=Filter serial=207376 03:07:41 Color wheel filter change from 0 to 0 03:07:41 FLIGetFilterPos err=0 currentPosition=0 03:07:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:07:41 Filter is already there-color wheel unchanged 03:07:41 Received message from Master: op=Shutter serial=207377 03:07:41 Shutter LASER close 03:07:41 Received message from Camera: op=State serial=207379 03:07:41 GetSingleValue result=40 Value=cccccccc 03:07:41 SkyScan query 03:07:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:07:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:42 Parameters OK 03:07:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:42 Set A/D data flow result=40 03:07:42 Set A/D channel type result=40 03:07:42 Set A/D encoding result=40 03:07:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:42 Set channel filter=0.000000e+000 result=40 03:07:42 Config A/D Result=40 03:07:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:42 Get A/D filter: -9.255963e+061 result=40 03:07:42 Get A/D value=-858993460 result=40 03:07:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:07:42 Parameters OK 03:07:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:07:42 Set A/D data flow result=40 03:07:42 Set A/D channel type result=40 03:07:42 Set A/D encoding result=40 03:07:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:07:42 Set channel filter=0.000000e+000 result=40 03:07:42 Config A/D Result=40 03:07:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:07:42 Get A/D filter: -9.255963e+061 result=40 03:07:42 Get A/D value=-858993460 result=40 03:07:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:07:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:07:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:07:42 Aux= 03:07:42 Message to Camera, serial 207379 queued 03:08:18 Received message from Master: op=PointingHead serial=207392 03:08:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:08:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:08:19 Point started: ret=0 03:08:19 point_skyscan result=0 03:08:20 Check angles 03:08:20 SkyScan query 03:08:20 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.78<-13452 Statuses=0009 0009 03:08:20 Msec=0 True Az=152.955 Ze=-21.78 Az status=0009 Ze status=0009 03:08:20 Check angles 03:08:20 SkyScan query 03:08:21 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.78<-12052 Statuses=0009 0009 03:08:21 Msec=750 True Az=135.615 Ze=-0.78 Az status=0009 Ze status=0009 03:08:21 Check angles 03:08:21 SkyScan query 03:08:22 SkyScan query done: ret=0 az=118.065<-7871 ze=20.145<-10657 Statuses=0009 0009 03:08:22 Msec=1500 True Az=118.065 Ze=20.145 Az status=0009 Ze status=0009 03:08:22 Check angles 03:08:22 SkyScan query 03:08:22 SkyScan query done: ret=0 az=100.665<-6711 ze=41.145<-9257 Statuses=0009 0009 03:08:22 Msec=2250 True Az=100.665 Ze=41.145 Az status=0009 Ze status=0009 03:08:23 Check angles 03:08:23 SkyScan query 03:08:23 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 03:08:23 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 03:08:23 Check angles 03:08:23 SkyScan query 03:08:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:08:24 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:08:24 Message to Master queued w/err=0: serial=207392 error=0 03:08:29 Received message from Master: op=Filter serial=207393 03:08:29 Color wheel filter change from 0 to 0 03:08:29 FLIGetFilterPos err=0 currentPosition=0 03:08:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:08:29 Filter is already there-color wheel unchanged 03:08:29 Received message from Master: op=Shutter serial=207394 03:08:29 Shutter LASER close 03:08:29 Received message from Camera: op=State serial=207396 03:08:29 GetSingleValue result=40 Value=cccccccc 03:08:29 SkyScan query 03:08:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:08:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:30 Parameters OK 03:08:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:30 Set A/D data flow result=40 03:08:30 Set A/D channel type result=40 03:08:30 Set A/D encoding result=40 03:08:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:30 Set channel filter=0.000000e+000 result=40 03:08:30 Config A/D Result=40 03:08:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:30 Get A/D filter: -9.255963e+061 result=40 03:08:30 Get A/D value=-858993460 result=40 03:08:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:08:30 Parameters OK 03:08:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:08:30 Set A/D data flow result=40 03:08:30 Set A/D channel type result=40 03:08:30 Set A/D encoding result=40 03:08:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:08:30 Set channel filter=0.000000e+000 result=40 03:08:30 Config A/D Result=40 03:08:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:08:30 Get A/D filter: -9.255963e+061 result=40 03:08:30 Get A/D value=-858993460 result=40 03:08:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:08:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:08:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:08:30 Aux= 03:08:30 Message to Camera, serial 207396 queued 03:09:07 Received message from Master: op=PointingHead serial=207409 03:09:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:09:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:09:07 Point started: ret=0 03:09:07 point_skyscan result=0 03:09:08 Check angles 03:09:08 SkyScan query 03:09:08 SkyScan query done: ret=0 az=85.995<-5733 ze=21.39<-10574 Statuses=0008 0009 03:09:08 Msec=0 True Az=85.995 Ze=21.39 Az status=0008 Ze status=0009 03:09:08 Check angles 03:09:08 SkyScan query 03:09:09 SkyScan query done: ret=0 az=85.995<-5733 ze=0.45<-11970 Statuses=0008 0009 03:09:09 Msec=750 True Az=85.995 Ze=0.45 Az status=0008 Ze status=0009 03:09:09 Check angles 03:09:09 SkyScan query 03:09:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.49<-13366 Statuses=0008 0009 03:09:10 Msec=1500 True Az=85.995 Ze=-20.49 Az status=0008 Ze status=0009 03:09:10 Check angles 03:09:10 SkyScan query 03:09:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.385<-14759 Statuses=0008 0009 03:09:11 Msec=2250 True Az=85.995 Ze=-41.385 Az status=0008 Ze status=0009 03:09:11 Check angles 03:09:11 SkyScan query 03:09:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:09:11 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:09:11 Message to Master queued w/err=0: serial=207409 error=0 03:09:16 Received message from Master: op=Filter serial=207410 03:09:16 Color wheel filter change from 0 to 0 03:09:16 FLIGetFilterPos err=0 currentPosition=0 03:09:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:09:16 Filter is already there-color wheel unchanged 03:09:16 Received message from Master: op=Shutter serial=207411 03:09:16 Shutter LASER close 03:09:17 Received message from Camera: op=State serial=207413 03:09:17 GetSingleValue result=40 Value=cccccccc 03:09:17 SkyScan query 03:09:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:09:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:17 Parameters OK 03:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:17 Set A/D data flow result=40 03:09:17 Set A/D channel type result=40 03:09:17 Set A/D encoding result=40 03:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:17 Set channel filter=0.000000e+000 result=40 03:09:17 Config A/D Result=40 03:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:17 Get A/D filter: -9.255963e+061 result=40 03:09:17 Get A/D value=-858993460 result=40 03:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:09:17 Parameters OK 03:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:09:17 Set A/D data flow result=40 03:09:17 Set A/D channel type result=40 03:09:17 Set A/D encoding result=40 03:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:09:17 Set channel filter=0.000000e+000 result=40 03:09:17 Config A/D Result=40 03:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:09:17 Get A/D filter: -9.255963e+061 result=40 03:09:17 Get A/D value=-858993460 result=40 03:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:09:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:09:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:09:17 Aux= 03:09:17 Message to Camera, serial 207413 queued 03:09:53 Received message from Master: op=PointingHead serial=207425 03:09:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:09:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:09:53 Point started: ret=0 03:09:53 point_skyscan result=0 03:09:54 Check angles 03:09:54 SkyScan query 03:09:55 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.405<-17427 Statuses=0009 0009 03:09:55 Msec=0 True Az=109.14 Ze=-81.405 Az status=0009 Ze status=0009 03:09:55 Check angles 03:09:55 SkyScan query 03:09:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.39<-18826 Statuses=0008 0009 03:09:55 Msec=750 True Az=112.995 Ze=-102.39 Az status=0008 Ze status=0009 03:09:56 Check angles 03:09:56 SkyScan query 03:09:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 03:09:56 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 03:09:56 Check angles 03:09:56 SkyScan query 03:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.27<-21618 Statuses=0008 0009 03:09:57 Msec=2250 True Az=112.995 Ze=-144.27 Az status=0008 Ze status=0009 03:09:57 Check angles 03:09:57 SkyScan query 03:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 03:09:58 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 03:09:58 Check angles 03:09:58 SkyScan query 03:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:09:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:09:58 Message to Master queued w/err=0: serial=207425 error=0 03:10:03 Received message from Master: op=Filter serial=207426 03:10:03 Color wheel filter change from 0 to 0 03:10:03 FLIGetFilterPos err=0 currentPosition=0 03:10:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:10:03 Filter is already there-color wheel unchanged 03:10:04 Received message from Master: op=Shutter serial=207427 03:10:04 Shutter LASER open 03:10:04 Received message from Camera: op=State serial=207429 03:10:04 GetSingleValue result=40 Value=cccccccc 03:10:04 SkyScan query 03:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:10:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:04 Parameters OK 03:10:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:04 Set A/D data flow result=40 03:10:04 Set A/D channel type result=40 03:10:04 Set A/D encoding result=40 03:10:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:04 Set channel filter=0.000000e+000 result=40 03:10:04 Config A/D Result=40 03:10:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:04 Get A/D filter: -9.255963e+061 result=40 03:10:04 Get A/D value=-858993460 result=40 03:10:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:04 Parameters OK 03:10:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:04 Set A/D data flow result=40 03:10:04 Set A/D channel type result=40 03:10:04 Set A/D encoding result=40 03:10:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:04 Set channel filter=0.000000e+000 result=40 03:10:04 Config A/D Result=40 03:10:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:04 Get A/D filter: -9.255963e+061 result=40 03:10:04 Get A/D value=-858993460 result=40 03:10:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:10:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:10:04 Aux= 03:10:04 Message to Camera, serial 207429 queued 03:10:13 Received message from Master: op=Shutter serial=207439 03:10:13 Shutter LASER close 03:10:13 Received message from Master: op=PointingHead serial=207443 03:10:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:10:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:10:14 Point started: ret=0 03:10:14 point_skyscan result=0 03:10:14 Check angles 03:10:14 SkyScan query 03:10:15 SkyScan query done: ret=0 az=90.06<-6004 ze=157.38<-1508 Statuses=0009 0009 03:10:15 Msec=0 True Az=90.06 Ze=157.38 Az status=0009 Ze status=0009 03:10:15 Check angles 03:10:15 SkyScan query 03:10:16 SkyScan query done: ret=0 az=72.555<-4837 ze=136.395<-2907 Statuses=0009 0009 03:10:16 Msec=750 True Az=72.555 Ze=136.395 Az status=0009 Ze status=0009 03:10:16 Check angles 03:10:16 SkyScan query 03:10:16 SkyScan query done: ret=0 az=55.23<-3682 ze=115.5<-4300 Statuses=0009 0009 03:10:16 Msec=1500 True Az=55.23 Ze=115.5 Az status=0009 Ze status=0009 03:10:17 Check angles 03:10:17 SkyScan query 03:10:17 SkyScan query done: ret=0 az=40.98<-2732 ze=94.485<-5701 Statuses=0009 0009 03:10:17 Msec=2250 True Az=40.98 Ze=94.485 Az status=0009 Ze status=0009 03:10:17 Check angles 03:10:17 SkyScan query 03:10:18 SkyScan query done: ret=0 az=40.98<-2732 ze=73.56<-7096 Statuses=0008 0009 03:10:18 Msec=3000 True Az=40.98 Ze=73.56 Az status=0008 Ze status=0009 03:10:18 Check angles 03:10:18 SkyScan query 03:10:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.89<-8474 Statuses=0008 0009 03:10:19 Msec=3750 True Az=40.995 Ze=52.89 Az status=0008 Ze status=0009 03:10:19 Check angles 03:10:19 SkyScan query 03:10:19 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 03:10:19 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 03:10:19 Message to Master queued w/err=0: serial=207443 error=0 03:10:24 Received message from Master: op=Filter serial=207444 03:10:24 Color wheel filter change from 0 to 0 03:10:24 FLIGetFilterPos err=0 currentPosition=0 03:10:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:10:24 Filter is already there-color wheel unchanged 03:10:25 Received message from Master: op=Shutter serial=207445 03:10:25 Shutter LASER close 03:10:25 Received message from Camera: op=State serial=207447 03:10:25 GetSingleValue result=40 Value=cccccccc 03:10:25 SkyScan query 03:10:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:10:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:25 Parameters OK 03:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:25 Set A/D data flow result=40 03:10:25 Set A/D channel type result=40 03:10:25 Set A/D encoding result=40 03:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:25 Set channel filter=0.000000e+000 result=40 03:10:25 Config A/D Result=40 03:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:25 Get A/D filter: -9.255963e+061 result=40 03:10:25 Get A/D value=-858993460 result=40 03:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:10:25 Parameters OK 03:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:10:25 Set A/D data flow result=40 03:10:25 Set A/D channel type result=40 03:10:25 Set A/D encoding result=40 03:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:10:25 Set channel filter=0.000000e+000 result=40 03:10:25 Config A/D Result=40 03:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:10:25 Get A/D filter: -9.255963e+061 result=40 03:10:25 Get A/D value=-858993460 result=40 03:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:10:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:10:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:10:25 Aux= 03:10:25 Message to Camera, serial 207447 queued 03:11:02 Received message from Master: op=PointingHead serial=207460 03:11:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:11:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:11:03 Point started: ret=0 03:11:03 point_skyscan result=0 03:11:03 Check angles 03:11:03 SkyScan query 03:11:04 SkyScan query done: ret=0 az=40.995<-2733 ze=21.495<-10567 Statuses=0008 0009 03:11:04 Msec=0 True Az=40.995 Ze=21.495 Az status=0008 Ze status=0009 03:11:04 Check angles 03:11:04 SkyScan query 03:11:05 SkyScan query done: ret=0 az=40.995<-2733 ze=0.51<-11966 Statuses=0008 0009 03:11:05 Msec=750 True Az=40.995 Ze=0.51 Az status=0008 Ze status=0009 03:11:05 Check angles 03:11:05 SkyScan query 03:11:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.445<-13363 Statuses=0008 0009 03:11:05 Msec=1500 True Az=40.995 Ze=-20.445 Az status=0008 Ze status=0009 03:11:06 Check angles 03:11:06 SkyScan query 03:11:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 03:11:06 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 03:11:06 Check angles 03:11:06 SkyScan query 03:11:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:11:07 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:11:07 Message to Master queued w/err=0: serial=207460 error=0 03:11:12 Received message from Master: op=Filter serial=207461 03:11:12 Color wheel filter change from 0 to 0 03:11:12 FLIGetFilterPos err=0 currentPosition=0 03:11:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:11:12 Filter is already there-color wheel unchanged 03:11:12 Received message from Master: op=Shutter serial=207462 03:11:12 Shutter LASER close 03:11:12 Received message from Camera: op=State serial=207464 03:11:12 GetSingleValue result=40 Value=cccccccc 03:11:12 SkyScan query 03:11:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:11:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:13 Parameters OK 03:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:13 Set A/D data flow result=40 03:11:13 Set A/D channel type result=40 03:11:13 Set A/D encoding result=40 03:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:13 Set channel filter=0.000000e+000 result=40 03:11:13 Config A/D Result=40 03:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:13 Get A/D filter: -9.255963e+061 result=40 03:11:13 Get A/D value=-858993460 result=40 03:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:11:13 Parameters OK 03:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:11:13 Set A/D data flow result=40 03:11:13 Set A/D channel type result=40 03:11:13 Set A/D encoding result=40 03:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:11:13 Set channel filter=0.000000e+000 result=40 03:11:13 Config A/D Result=40 03:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:11:13 Get A/D filter: -9.255963e+061 result=40 03:11:13 Get A/D value=-858993460 result=40 03:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:11:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:11:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:11:13 Aux= 03:11:13 Message to Camera, serial 207464 queued 03:11:50 Received message from Master: op=PointingHead serial=207477 03:11:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:11:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:11:50 Point started: ret=0 03:11:50 point_skyscan result=0 03:11:51 Check angles 03:11:51 SkyScan query 03:11:51 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.295<-16553 Statuses=0009 0009 03:11:51 Msec=0 True Az=63.945 Ze=-68.295 Az status=0009 Ze status=0009 03:11:51 Check angles 03:11:51 SkyScan query 03:11:52 SkyScan query done: ret=0 az=81.87<-5458 ze=-89.7<-17980 Statuses=0009 0009 03:11:52 Msec=750 True Az=81.87 Ze=-89.7 Az status=0009 Ze status=0009 03:11:52 Check angles 03:11:52 SkyScan query 03:11:53 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.7<-19380 Statuses=0009 0009 03:11:53 Msec=1500 True Az=99.36 Ze=-110.7 Az status=0009 Ze status=0009 03:11:53 Check angles 03:11:53 SkyScan query 03:11:54 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.595<-20773 Statuses=0009 0009 03:11:54 Msec=2250 True Az=116.73 Ze=-131.595 Az status=0009 Ze status=0009 03:11:54 Check angles 03:11:54 SkyScan query 03:11:54 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 03:11:54 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 03:11:54 Check angles 03:11:54 SkyScan query 03:11:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:11:55 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:11:55 Message to Master queued w/err=0: serial=207477 error=0 03:12:00 Received message from Master: op=Filter serial=207478 03:12:00 Color wheel filter change from 0 to 0 03:12:00 FLIGetFilterPos err=0 currentPosition=0 03:12:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:00 Filter is already there-color wheel unchanged 03:12:00 Received message from Master: op=Shutter serial=207479 03:12:00 Shutter LASER close 03:12:00 Received message from Camera: op=State serial=207481 03:12:00 GetSingleValue result=40 Value=cccccccc 03:12:00 SkyScan query 03:12:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:12:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:01 Parameters OK 03:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:01 Set A/D data flow result=40 03:12:01 Set A/D channel type result=40 03:12:01 Set A/D encoding result=40 03:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:01 Set channel filter=0.000000e+000 result=40 03:12:01 Config A/D Result=40 03:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:01 Get A/D filter: -9.255963e+061 result=40 03:12:01 Get A/D value=-858993460 result=40 03:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:01 Parameters OK 03:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:01 Set A/D data flow result=40 03:12:01 Set A/D channel type result=40 03:12:01 Set A/D encoding result=40 03:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:01 Set channel filter=0.000000e+000 result=40 03:12:01 Config A/D Result=40 03:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:01 Get A/D filter: -9.255963e+061 result=40 03:12:01 Get A/D value=-858993460 result=40 03:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:01 Aux= 03:12:01 Message to Camera, serial 207481 queued 03:12:38 Received message from Master: op=PointingHead serial=207494 03:12:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:12:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:12:38 Point started: ret=0 03:12:38 point_skyscan result=0 03:12:39 Check angles 03:12:39 SkyScan query 03:12:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 03:12:39 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 03:12:39 Check angles 03:12:39 SkyScan query 03:12:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:12:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:12:40 Message to Master queued w/err=0: serial=207494 error=0 03:12:45 Received message from Master: op=Filter serial=207495 03:12:45 Color wheel filter change from 0 to 0 03:12:45 FLIGetFilterPos err=0 currentPosition=0 03:12:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:45 Filter is already there-color wheel unchanged 03:12:45 Received message from Master: op=Shutter serial=207496 03:12:45 Shutter LASER open 03:12:45 Received message from Camera: op=State serial=207498 03:12:45 GetSingleValue result=40 Value=cccccccc 03:12:45 SkyScan query 03:12:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:12:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:46 Parameters OK 03:12:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:46 Set A/D data flow result=40 03:12:46 Set A/D channel type result=40 03:12:46 Set A/D encoding result=40 03:12:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:46 Set channel filter=0.000000e+000 result=40 03:12:46 Config A/D Result=40 03:12:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:46 Get A/D filter: -9.255963e+061 result=40 03:12:46 Get A/D value=-858993460 result=40 03:12:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:46 Parameters OK 03:12:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:46 Set A/D data flow result=40 03:12:46 Set A/D channel type result=40 03:12:46 Set A/D encoding result=40 03:12:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:46 Set channel filter=0.000000e+000 result=40 03:12:46 Config A/D Result=40 03:12:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:46 Get A/D filter: -9.255963e+061 result=40 03:12:46 Get A/D value=-858993460 result=40 03:12:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:46 Aux= 03:12:46 Message to Camera, serial 207498 queued 03:12:54 Received message from Master: op=Shutter serial=207508 03:12:54 Shutter LASER close 03:12:55 Received message from Master: op=PointingHead serial=207512 03:12:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:12:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:12:55 Point started: ret=0 03:12:55 point_skyscan result=0 03:12:56 Check angles 03:12:56 SkyScan query 03:12:57 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.505<-21567 Statuses=0009 0009 03:12:57 Msec=0 True Az=135.825 Ze=-143.505 Az status=0009 Ze status=0009 03:12:57 Check angles 03:12:57 SkyScan query 03:12:57 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.055<-20137 Statuses=0009 0009 03:12:57 Msec=750 True Az=153.645 Ze=-122.055 Az status=0009 Ze status=0009 03:12:58 Check angles 03:12:58 SkyScan query 03:12:58 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.115<-18741 Statuses=0009 0009 03:12:58 Msec=1500 True Az=171.24 Ze=-101.115 Az status=0009 Ze status=0009 03:12:58 Check angles 03:12:58 SkyScan query 03:12:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 03:12:59 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 03:12:59 Check angles 03:12:59 SkyScan query 03:13:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.205<-15947 Statuses=0008 0009 03:13:00 Msec=3000 True Az=175.995 Ze=-59.205 Az status=0008 Ze status=0009 03:13:00 Check angles 03:13:00 SkyScan query 03:13:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:13:00 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:13:00 Message to Master queued w/err=0: serial=207512 error=0 03:13:05 Received message from Master: op=Filter serial=207513 03:13:05 Color wheel filter change from 0 to 0 03:13:05 FLIGetFilterPos err=0 currentPosition=0 03:13:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:05 Filter is already there-color wheel unchanged 03:13:06 Received message from Master: op=Shutter serial=207514 03:13:06 Shutter LASER close 03:13:06 Received message from Camera: op=State serial=207516 03:13:06 GetSingleValue result=40 Value=cccccccc 03:13:06 SkyScan query 03:13:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:13:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:06 Parameters OK 03:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:06 Set A/D data flow result=40 03:13:06 Set A/D channel type result=40 03:13:06 Set A/D encoding result=40 03:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:06 Set channel filter=0.000000e+000 result=40 03:13:06 Config A/D Result=40 03:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:06 Get A/D filter: -9.255963e+061 result=40 03:13:06 Get A/D value=-858993460 result=40 03:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:06 Parameters OK 03:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:06 Set A/D data flow result=40 03:13:06 Set A/D channel type result=40 03:13:06 Set A/D encoding result=40 03:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:06 Set channel filter=0.000000e+000 result=40 03:13:06 Config A/D Result=40 03:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:06 Get A/D filter: -9.255963e+061 result=40 03:13:06 Get A/D value=-858993460 result=40 03:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:06 Aux= 03:13:06 Message to Camera, serial 207516 queued 03:13:43 Received message from Master: op=PointingHead serial=207529 03:13:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:13:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:13:44 Point started: ret=0 03:13:44 point_skyscan result=0 03:13:44 Check angles 03:13:44 SkyScan query 03:13:45 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.75<-13450 Statuses=0009 0009 03:13:45 Msec=0 True Az=152.985 Ze=-21.75 Az status=0009 Ze status=0009 03:13:45 Check angles 03:13:45 SkyScan query 03:13:46 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.75<-12050 Statuses=0009 0009 03:13:46 Msec=750 True Az=135.45 Ze=-0.75 Az status=0009 Ze status=0009 03:13:46 Check angles 03:13:46 SkyScan query 03:13:46 SkyScan query done: ret=0 az=117.96<-7864 ze=20.175<-10655 Statuses=0009 0009 03:13:46 Msec=1500 True Az=117.96 Ze=20.175 Az status=0009 Ze status=0009 03:13:47 Check angles 03:13:47 SkyScan query 03:13:47 SkyScan query done: ret=0 az=100.23<-6682 ze=41.58<-9228 Statuses=0009 0009 03:13:47 Msec=2250 True Az=100.23 Ze=41.58 Az status=0009 Ze status=0009 03:13:47 Check angles 03:13:47 SkyScan query 03:13:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 03:13:48 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 03:13:48 Check angles 03:13:48 SkyScan query 03:13:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:13:49 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 03:13:49 Message to Master queued w/err=0: serial=207529 error=0 03:13:54 Received message from Master: op=Filter serial=207530 03:13:54 Color wheel filter change from 0 to 0 03:13:54 FLIGetFilterPos err=0 currentPosition=0 03:13:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:54 Filter is already there-color wheel unchanged 03:13:54 Received message from Master: op=Shutter serial=207531 03:13:54 Shutter LASER close 03:13:54 Received message from Camera: op=State serial=207533 03:13:54 GetSingleValue result=40 Value=cccccccc 03:13:54 SkyScan query 03:13:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 03:13:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:55 Parameters OK 03:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:55 Set A/D data flow result=40 03:13:55 Set A/D channel type result=40 03:13:55 Set A/D encoding result=40 03:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:55 Set channel filter=0.000000e+000 result=40 03:13:55 Config A/D Result=40 03:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:55 Get A/D filter: -9.255963e+061 result=40 03:13:55 Get A/D value=-858993460 result=40 03:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:55 Parameters OK 03:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:55 Set A/D data flow result=40 03:13:55 Set A/D channel type result=40 03:13:55 Set A/D encoding result=40 03:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:55 Set channel filter=0.000000e+000 result=40 03:13:55 Config A/D Result=40 03:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:55 Get A/D filter: -9.255963e+061 result=40 03:13:55 Get A/D value=-858993460 result=40 03:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:55 Aux= 03:13:55 Message to Camera, serial 207533 queued 03:14:31 Received message from Master: op=PointingHead serial=207546 03:14:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:14:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:14:32 Point started: ret=0 03:14:32 point_skyscan result=0 03:14:33 Check angles 03:14:33 SkyScan query 03:14:33 SkyScan query done: ret=0 az=85.995<-5733 ze=21.9<-10540 Statuses=0008 0009 03:14:33 Msec=0 True Az=85.995 Ze=21.9 Az status=0008 Ze status=0009 03:14:33 Check angles 03:14:33 SkyScan query 03:14:34 SkyScan query done: ret=0 az=85.995<-5733 ze=0.945<-11937 Statuses=0008 0009 03:14:34 Msec=750 True Az=85.995 Ze=0.945 Az status=0008 Ze status=0009 03:14:34 Check angles 03:14:34 SkyScan query 03:14:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-19.98<-13332 Statuses=0008 0009 03:14:35 Msec=1500 True Az=85.995 Ze=-19.98 Az status=0008 Ze status=0009 03:14:35 Check angles 03:14:35 SkyScan query 03:14:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.95<-14730 Statuses=0008 0009 03:14:35 Msec=2250 True Az=85.995 Ze=-40.95 Az status=0008 Ze status=0009 03:14:36 Check angles 03:14:36 SkyScan query 03:14:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:14:36 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:14:36 Message to Master queued w/err=0: serial=207546 error=0 03:14:41 Received message from Master: op=Filter serial=207547 03:14:41 Color wheel filter change from 0 to 0 03:14:41 FLIGetFilterPos err=0 currentPosition=0 03:14:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:41 Filter is already there-color wheel unchanged 03:14:41 Received message from Master: op=Shutter serial=207548 03:14:41 Shutter LASER close 03:14:41 Received message from Camera: op=State serial=207550 03:14:41 GetSingleValue result=40 Value=cccccccc 03:14:41 SkyScan query 03:14:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:14:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:42 Parameters OK 03:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:42 Set A/D data flow result=40 03:14:42 Set A/D channel type result=40 03:14:42 Set A/D encoding result=40 03:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:42 Set channel filter=0.000000e+000 result=40 03:14:42 Config A/D Result=40 03:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:42 Get A/D filter: -9.255963e+061 result=40 03:14:42 Get A/D value=-858993460 result=40 03:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:42 Parameters OK 03:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:42 Set A/D data flow result=40 03:14:42 Set A/D channel type result=40 03:14:42 Set A/D encoding result=40 03:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:42 Set channel filter=0.000000e+000 result=40 03:14:42 Config A/D Result=40 03:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:42 Get A/D filter: -9.255963e+061 result=40 03:14:42 Get A/D value=-858993460 result=40 03:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:42 Aux= 03:14:42 Message to Camera, serial 207550 queued 03:15:19 Received message from Master: op=PointingHead serial=207563 03:15:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:15:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:15:19 Point started: ret=0 03:15:19 point_skyscan result=0 03:15:20 Check angles 03:15:20 SkyScan query 03:15:20 SkyScan query done: ret=0 az=109.47<-7298 ze=-81.69<-17446 Statuses=0009 0009 03:15:20 Msec=0 True Az=109.47 Ze=-81.69 Az status=0009 Ze status=0009 03:15:21 Check angles 03:15:21 SkyScan query 03:15:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 03:15:21 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 03:15:21 Check angles 03:15:21 SkyScan query 03:15:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 03:15:22 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 03:15:22 Check angles 03:15:22 SkyScan query 03:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 03:15:23 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 03:15:23 Check angles 03:15:23 SkyScan query 03:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 03:15:23 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 03:15:24 Check angles 03:15:24 SkyScan query 03:15:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:15:24 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:15:24 Message to Master queued w/err=0: serial=207563 error=0 03:15:27 Received message from Master: op=Identify serial=207564 03:15:29 Received message from Master: op=Filter serial=207567 03:15:29 Color wheel filter change from 0 to 0 03:15:29 FLIGetFilterPos err=0 currentPosition=0 03:15:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:29 Filter is already there-color wheel unchanged 03:15:29 Received message from Master: op=Shutter serial=207568 03:15:29 Shutter LASER open 03:15:30 Received message from Camera: op=State serial=207570 03:15:30 GetSingleValue result=40 Value=cccccccc 03:15:30 SkyScan query 03:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:15:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:30 Parameters OK 03:15:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:30 Set A/D data flow result=40 03:15:30 Set A/D channel type result=40 03:15:30 Set A/D encoding result=40 03:15:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:30 Set channel filter=0.000000e+000 result=40 03:15:30 Config A/D Result=40 03:15:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:30 Get A/D filter: -9.255963e+061 result=40 03:15:30 Get A/D value=-858993460 result=40 03:15:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:30 Parameters OK 03:15:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:30 Set A/D data flow result=40 03:15:30 Set A/D channel type result=40 03:15:30 Set A/D encoding result=40 03:15:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:30 Set channel filter=0.000000e+000 result=40 03:15:30 Config A/D Result=40 03:15:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:30 Get A/D filter: -9.255963e+061 result=40 03:15:30 Get A/D value=-858993460 result=40 03:15:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:30 Aux= 03:15:30 Message to Camera, serial 207570 queued 03:15:39 Received message from Master: op=Shutter serial=207580 03:15:39 Shutter LASER close 03:15:39 Received message from Master: op=PointingHead serial=207584 03:15:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) [UTC 2018-12-17 03:15:39] 03:15:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:15:39 Point started: ret=0 03:15:39 point_skyscan result=0 03:15:40 Check angles 03:15:40 SkyScan query 03:15:41 SkyScan query done: ret=0 az=90.15<-6010 ze=157.575<-1495 Statuses=0009 0009 03:15:41 Msec=0 True Az=90.15 Ze=157.575 Az status=0009 Ze status=0009 03:15:41 Check angles 03:15:41 SkyScan query 03:15:42 SkyScan query done: ret=0 az=72.24<-4816 ze=136.17<-2922 Statuses=0009 0009 03:15:42 Msec=750 True Az=72.24 Ze=136.17 Az status=0009 Ze status=0009 03:15:42 Check angles 03:15:42 SkyScan query 03:15:42 SkyScan query done: ret=0 az=54.915<-3661 ze=115.26<-4316 Statuses=0009 0009 03:15:42 Msec=1500 True Az=54.915 Ze=115.26 Az status=0009 Ze status=0009 03:15:42 Check angles 03:15:42 SkyScan query 03:15:43 SkyScan query done: ret=0 az=40.995<-2733 ze=94.245<-5717 Statuses=0009 0009 03:15:43 Msec=2250 True Az=40.995 Ze=94.245 Az status=0009 Ze status=0009 03:15:43 Check angles 03:15:43 SkyScan query 03:15:44 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 03:15:44 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 03:15:44 Check angles 03:15:44 SkyScan query 03:15:45 SkyScan query done: ret=0 az=40.98<-2732 ze=52.77<-8482 Statuses=0008 0009 03:15:45 Msec=3750 True Az=40.98 Ze=52.77 Az status=0008 Ze status=0009 03:15:45 Check angles 03:15:45 SkyScan query 03:15:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:15:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:15:45 Message to Master queued w/err=0: serial=207584 error=0 03:15:50 Received message from Master: op=Filter serial=207585 03:15:50 Color wheel filter change from 0 to 0 03:15:50 FLIGetFilterPos err=0 currentPosition=0 03:15:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:50 Filter is already there-color wheel unchanged 03:15:50 Received message from Master: op=Shutter serial=207586 03:15:50 Shutter LASER close 03:15:51 Received message from Camera: op=State serial=207588 03:15:51 GetSingleValue result=40 Value=cccccccc 03:15:51 SkyScan query 03:15:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:15:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:51 Parameters OK 03:15:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:51 Set A/D data flow result=40 03:15:51 Set A/D channel type result=40 03:15:51 Set A/D encoding result=40 03:15:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:51 Set channel filter=0.000000e+000 result=40 03:15:51 Config A/D Result=40 03:15:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:51 Get A/D filter: -9.255963e+061 result=40 03:15:51 Get A/D value=-858993460 result=40 03:15:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:51 Parameters OK 03:15:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:51 Set A/D data flow result=40 03:15:51 Set A/D channel type result=40 03:15:51 Set A/D encoding result=40 03:15:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:51 Set channel filter=0.000000e+000 result=40 03:15:51 Config A/D Result=40 03:15:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:51 Get A/D filter: -9.255963e+061 result=40 03:15:51 Get A/D value=-858993460 result=40 03:15:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:51 Aux= 03:15:51 Message to Camera, serial 207588 queued [UTC 2018-12-17 03:15:52] 03:16:28 Received message from Master: op=PointingHead serial=207601 03:16:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:16:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:16:28 Point started: ret=0 03:16:28 point_skyscan result=0 03:16:29 Check angles 03:16:29 SkyScan query 03:16:30 SkyScan query done: ret=0 az=40.995<-2733 ze=21.405<-10573 Statuses=0008 0009 03:16:30 Msec=0 True Az=40.995 Ze=21.405 Az status=0008 Ze status=0009 03:16:30 Check angles 03:16:30 SkyScan query 03:16:31 SkyScan query done: ret=0 az=41.01<-2734 ze=0.42<-11972 Statuses=0008 0009 03:16:31 Msec=750 True Az=41.01 Ze=0.42 Az status=0008 Ze status=0009 03:16:31 Check angles 03:16:31 SkyScan query 03:16:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.565<-13371 Statuses=0008 0009 03:16:31 Msec=1500 True Az=40.995 Ze=-20.565 Az status=0008 Ze status=0009 03:16:32 Check angles 03:16:32 SkyScan query 03:16:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 03:16:32 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 03:16:32 Check angles 03:16:32 SkyScan query 03:16:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:16:33 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:16:33 Message to Master queued w/err=0: serial=207601 error=0 03:16:38 Received message from Master: op=Filter serial=207602 03:16:38 Color wheel filter change from 0 to 0 03:16:38 FLIGetFilterPos err=0 currentPosition=0 03:16:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:16:38 Filter is already there-color wheel unchanged 03:16:38 Received message from Master: op=Shutter serial=207603 03:16:38 Shutter LASER close 03:16:38 Received message from Camera: op=State serial=207605 03:16:38 GetSingleValue result=40 Value=cccccccc 03:16:38 SkyScan query 03:16:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:16:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:39 Parameters OK 03:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:39 Set A/D data flow result=40 03:16:39 Set A/D channel type result=40 03:16:39 Set A/D encoding result=40 03:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:39 Set channel filter=0.000000e+000 result=40 03:16:39 Config A/D Result=40 03:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:39 Get A/D filter: -9.255963e+061 result=40 03:16:39 Get A/D value=-858993460 result=40 03:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:39 Parameters OK 03:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:39 Set A/D data flow result=40 03:16:39 Set A/D channel type result=40 03:16:39 Set A/D encoding result=40 03:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:39 Set channel filter=0.000000e+000 result=40 03:16:39 Config A/D Result=40 03:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:39 Get A/D filter: -9.255963e+061 result=40 03:16:39 Get A/D value=-858993460 result=40 03:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:16:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:16:39 Aux= 03:16:39 Message to Camera, serial 207605 queued 03:17:15 Received message from Master: op=PointingHead serial=207618 03:17:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:17:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:17:16 Point started: ret=0 03:17:16 point_skyscan result=0 03:17:17 Check angles 03:17:17 SkyScan query 03:17:17 SkyScan query done: ret=0 az=64.275<-4285 ze=-68.685<-16579 Statuses=0009 0009 03:17:17 Msec=0 True Az=64.275 Ze=-68.685 Az status=0009 Ze status=0009 03:17:17 Check angles 03:17:17 SkyScan query 03:17:18 SkyScan query done: ret=0 az=82.17<-5478 ze=-90.06<-18004 Statuses=0009 0009 03:17:18 Msec=750 True Az=82.17 Ze=-90.06 Az status=0009 Ze status=0009 03:17:18 Check angles 03:17:18 SkyScan query 03:17:19 SkyScan query done: ret=0 az=99.66<-6644 ze=-111.06<-19404 Statuses=0009 0009 03:17:19 Msec=1500 True Az=99.66 Ze=-111.06 Az status=0009 Ze status=0009 03:17:19 Check angles 03:17:19 SkyScan query 03:17:19 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.985<-20799 Statuses=0009 0009 03:17:19 Msec=2250 True Az=117.06 Ze=-131.985 Az status=0009 Ze status=0009 03:17:20 Check angles 03:17:20 SkyScan query 03:17:20 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.57<-21438 Statuses=0009 0008 03:17:20 Msec=3000 True Az=131.055 Ze=-141.57 Az status=0009 Ze status=0008 03:17:20 Check angles 03:17:20 SkyScan query 03:17:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:17:21 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:17:21 Message to Master queued w/err=0: serial=207618 error=0 03:17:26 Received message from Master: op=Filter serial=207619 03:17:26 Color wheel filter change from 0 to 0 03:17:26 FLIGetFilterPos err=0 currentPosition=0 03:17:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:26 Filter is already there-color wheel unchanged 03:17:26 Received message from Master: op=Shutter serial=207620 03:17:26 Shutter LASER close 03:17:26 Received message from Camera: op=State serial=207622 03:17:26 GetSingleValue result=40 Value=cccccccc 03:17:26 SkyScan query 03:17:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:17:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:27 Parameters OK 03:17:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:27 Set A/D data flow result=40 03:17:27 Set A/D channel type result=40 03:17:27 Set A/D encoding result=40 03:17:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:27 Set channel filter=0.000000e+000 result=40 03:17:27 Config A/D Result=40 03:17:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:27 Get A/D filter: -9.255963e+061 result=40 03:17:27 Get A/D value=-858993460 result=40 03:17:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:27 Parameters OK 03:17:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:27 Set A/D data flow result=40 03:17:27 Set A/D channel type result=40 03:17:27 Set A/D encoding result=40 03:17:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:27 Set channel filter=0.000000e+000 result=40 03:17:27 Config A/D Result=40 03:17:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:27 Get A/D filter: -9.255963e+061 result=40 03:17:27 Get A/D value=-858993460 result=40 03:17:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:27 Aux= 03:17:27 Message to Camera, serial 207622 queued 03:18:04 Received message from Master: op=PointingHead serial=207635 03:18:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:18:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:18:04 Point started: ret=0 03:18:04 point_skyscan result=0 03:18:05 Check angles 03:18:05 SkyScan query 03:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0009 0009 03:18:05 Msec=0 True Az=112.995 Ze=-171.465 Az status=0009 Ze status=0009 03:18:05 Check angles 03:18:05 SkyScan query 03:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:18:06 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:18:06 Message to Master queued w/err=0: serial=207635 error=0 03:18:11 Received message from Master: op=Filter serial=207636 03:18:11 Color wheel filter change from 0 to 0 03:18:11 FLIGetFilterPos err=0 currentPosition=0 03:18:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:11 Filter is already there-color wheel unchanged 03:18:11 Received message from Master: op=Shutter serial=207637 03:18:11 Shutter LASER open 03:18:11 Received message from Camera: op=State serial=207639 03:18:11 GetSingleValue result=40 Value=cccccccc 03:18:11 SkyScan query 03:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:18:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:12 Parameters OK 03:18:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:12 Set A/D data flow result=40 03:18:12 Set A/D channel type result=40 03:18:12 Set A/D encoding result=40 03:18:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:12 Set channel filter=0.000000e+000 result=40 03:18:12 Config A/D Result=40 03:18:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:12 Get A/D filter: -9.255963e+061 result=40 03:18:12 Get A/D value=-858993460 result=40 03:18:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:12 Parameters OK 03:18:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:12 Set A/D data flow result=40 03:18:12 Set A/D channel type result=40 03:18:12 Set A/D encoding result=40 03:18:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:12 Set channel filter=0.000000e+000 result=40 03:18:12 Config A/D Result=40 03:18:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:12 Get A/D filter: -9.255963e+061 result=40 03:18:12 Get A/D value=-858993460 result=40 03:18:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:12 Aux= 03:18:12 Message to Camera, serial 207639 queued 03:18:20 Received message from Master: op=Shutter serial=207649 03:18:20 Shutter LASER close 03:18:21 Received message from Master: op=PointingHead serial=207653 03:18:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:18:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:18:21 Point started: ret=0 03:18:21 point_skyscan result=0 03:18:22 Check angles 03:18:22 SkyScan query 03:18:23 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.145<-21543 Statuses=0009 0009 03:18:23 Msec=0 True Az=136.17 Ze=-143.145 Az status=0009 Ze status=0009 03:18:23 Check angles 03:18:23 SkyScan query 03:18:24 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.13<-20142 Statuses=0009 0009 03:18:24 Msec=750 True Az=153.57 Ze=-122.13 Az status=0009 Ze status=0009 03:18:24 Check angles 03:18:24 SkyScan query 03:18:24 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.22<-18748 Statuses=0009 0009 03:18:24 Msec=1500 True Az=171.105 Ze=-101.22 Az status=0009 Ze status=0009 03:18:24 Check angles 03:18:24 SkyScan query 03:18:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.31<-17354 Statuses=0008 0009 03:18:25 Msec=2250 True Az=176.01 Ze=-80.31 Az status=0008 Ze status=0009 03:18:25 Check angles 03:18:25 SkyScan query 03:18:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 03:18:26 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 03:18:26 Check angles 03:18:26 SkyScan query 03:18:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:18:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:18:27 Message to Master queued w/err=0: serial=207653 error=0 03:18:32 Received message from Master: op=Filter serial=207654 03:18:32 Color wheel filter change from 0 to 0 03:18:32 FLIGetFilterPos err=0 currentPosition=0 03:18:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:32 Filter is already there-color wheel unchanged 03:18:32 Received message from Master: op=Shutter serial=207655 03:18:32 Shutter LASER close 03:18:32 Received message from Camera: op=State serial=207657 03:18:32 GetSingleValue result=40 Value=cccccccc 03:18:32 SkyScan query 03:18:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:32 Parameters OK 03:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:32 Set A/D data flow result=40 03:18:32 Set A/D channel type result=40 03:18:32 Set A/D encoding result=40 03:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:32 Set channel filter=0.000000e+000 result=40 03:18:32 Config A/D Result=40 03:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:32 Get A/D filter: -9.255963e+061 result=40 03:18:32 Get A/D value=-858993460 result=40 03:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:32 Parameters OK 03:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:32 Set A/D data flow result=40 03:18:32 Set A/D channel type result=40 03:18:32 Set A/D encoding result=40 03:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:32 Set channel filter=0.000000e+000 result=40 03:18:32 Config A/D Result=40 03:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:32 Get A/D filter: -9.255963e+061 result=40 03:18:32 Get A/D value=-858993460 result=40 03:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:32 Aux= 03:18:32 Message to Camera, serial 207657 queued 03:19:09 Received message from Master: op=PointingHead serial=207670 03:19:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:19:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:19:10 Point started: ret=0 03:19:10 point_skyscan result=0 03:19:10 Check angles 03:19:10 SkyScan query 03:19:11 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.9<-13460 Statuses=0009 0009 03:19:11 Msec=0 True Az=153.105 Ze=-21.9 Az status=0009 Ze status=0009 03:19:11 Check angles 03:19:11 SkyScan query 03:19:12 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.465<-12031 Statuses=0009 0009 03:19:12 Msec=750 True Az=135.315 Ze=-0.465 Az status=0009 Ze status=0009 03:19:12 Check angles 03:19:12 SkyScan query 03:19:12 SkyScan query done: ret=0 az=117.75<-7850 ze=20.505<-10633 Statuses=0009 0009 03:19:12 Msec=1500 True Az=117.75 Ze=20.505 Az status=0009 Ze status=0009 03:19:13 Check angles 03:19:13 SkyScan query 03:19:13 SkyScan query done: ret=0 az=100.395<-6693 ze=41.46<-9236 Statuses=0009 0009 03:19:13 Msec=2250 True Az=100.395 Ze=41.46 Az status=0009 Ze status=0009 03:19:13 Check angles 03:19:13 SkyScan query 03:19:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 03:19:14 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 03:19:14 Check angles 03:19:14 SkyScan query 03:19:15 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 03:19:15 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 03:19:15 Message to Master queued w/err=0: serial=207670 error=0 03:19:20 Received message from Master: op=Filter serial=207671 03:19:20 Color wheel filter change from 0 to 0 03:19:20 FLIGetFilterPos err=0 currentPosition=0 03:19:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:20 Filter is already there-color wheel unchanged 03:19:20 Received message from Master: op=Shutter serial=207672 03:19:20 Shutter LASER close 03:19:20 Received message from Camera: op=State serial=207674 03:19:20 GetSingleValue result=40 Value=cccccccc 03:19:20 SkyScan query 03:19:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:19:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:21 Parameters OK 03:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:21 Set A/D data flow result=40 03:19:21 Set A/D channel type result=40 03:19:21 Set A/D encoding result=40 03:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:21 Set channel filter=0.000000e+000 result=40 03:19:21 Config A/D Result=40 03:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:21 Get A/D filter: -9.255963e+061 result=40 03:19:21 Get A/D value=-858993460 result=40 03:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:21 Parameters OK 03:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:21 Set A/D data flow result=40 03:19:21 Set A/D channel type result=40 03:19:21 Set A/D encoding result=40 03:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:21 Set channel filter=0.000000e+000 result=40 03:19:21 Config A/D Result=40 03:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:21 Get A/D filter: -9.255963e+061 result=40 03:19:21 Get A/D value=-858993460 result=40 03:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:21 Aux= 03:19:21 Message to Camera, serial 207674 queued 03:19:57 Received message from Master: op=PointingHead serial=207687 03:19:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:19:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:19:58 Point started: ret=0 03:19:58 point_skyscan result=0 03:19:59 Check angles 03:19:59 SkyScan query 03:19:59 SkyScan query done: ret=0 az=85.995<-5733 ze=21.66<-10556 Statuses=0008 0009 03:19:59 Msec=0 True Az=85.995 Ze=21.66 Az status=0008 Ze status=0009 03:19:59 Check angles 03:19:59 SkyScan query 03:20:00 SkyScan query done: ret=0 az=85.995<-5733 ze=0.735<-11951 Statuses=0008 0009 03:20:00 Msec=750 True Az=85.995 Ze=0.735 Az status=0008 Ze status=0009 03:20:00 Check angles 03:20:00 SkyScan query 03:20:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.685<-13379 Statuses=0008 0009 03:20:01 Msec=1500 True Az=85.995 Ze=-20.685 Az status=0008 Ze status=0009 03:20:01 Check angles 03:20:01 SkyScan query 03:20:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.595<-14773 Statuses=0008 0009 03:20:01 Msec=2250 True Az=85.995 Ze=-41.595 Az status=0008 Ze status=0009 03:20:02 Check angles 03:20:02 SkyScan query 03:20:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:20:02 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:20:02 Message to Master queued w/err=0: serial=207687 error=0 03:20:07 Received message from Master: op=Filter serial=207688 03:20:07 Color wheel filter change from 0 to 0 03:20:07 FLIGetFilterPos err=0 currentPosition=0 03:20:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:07 Filter is already there-color wheel unchanged 03:20:07 Received message from Master: op=Shutter serial=207689 03:20:07 Shutter LASER close 03:20:07 Received message from Camera: op=State serial=207691 03:20:07 GetSingleValue result=40 Value=cccccccc 03:20:07 SkyScan query 03:20:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:20:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:08 Parameters OK 03:20:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:08 Set A/D data flow result=40 03:20:08 Set A/D channel type result=40 03:20:08 Set A/D encoding result=40 03:20:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:08 Set channel filter=0.000000e+000 result=40 03:20:08 Config A/D Result=40 03:20:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:08 Get A/D filter: -9.255963e+061 result=40 03:20:08 Get A/D value=-858993460 result=40 03:20:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:08 Parameters OK 03:20:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:08 Set A/D data flow result=40 03:20:08 Set A/D channel type result=40 03:20:08 Set A/D encoding result=40 03:20:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:08 Set channel filter=0.000000e+000 result=40 03:20:08 Config A/D Result=40 03:20:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:08 Get A/D filter: -9.255963e+061 result=40 03:20:08 Get A/D value=-858993460 result=40 03:20:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:08 Aux= 03:20:08 Message to Camera, serial 207691 queued 03:20:45 Received message from Master: op=PointingHead serial=207704 03:20:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:20:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:20:45 Point started: ret=0 03:20:45 point_skyscan result=0 03:20:46 Check angles 03:20:46 SkyScan query 03:20:47 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.15<-17410 Statuses=0009 0009 03:20:47 Msec=0 True Az=108.915 Ze=-81.15 Az status=0009 Ze status=0009 03:20:47 Check angles 03:20:47 SkyScan query 03:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 03:20:47 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 03:20:47 Check angles 03:20:47 SkyScan query 03:20:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 03:20:48 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 03:20:48 Check angles 03:20:48 SkyScan query 03:20:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.87<-21658 Statuses=0008 0009 03:20:49 Msec=2250 True Az=112.995 Ze=-144.87 Az status=0008 Ze status=0009 03:20:49 Check angles 03:20:49 SkyScan query 03:20:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.795<-23053 Statuses=0008 0009 03:20:50 Msec=3000 True Az=112.995 Ze=-165.795 Az status=0008 Ze status=0009 03:20:50 Check angles 03:20:50 SkyScan query 03:20:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:20:50 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:20:50 Message to Master queued w/err=0: serial=207704 error=0 03:20:55 Received message from Master: op=Filter serial=207705 03:20:55 Color wheel filter change from 0 to 0 03:20:55 FLIGetFilterPos err=0 currentPosition=0 03:20:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:55 Filter is already there-color wheel unchanged 03:20:55 Received message from Master: op=Shutter serial=207706 03:20:55 Shutter LASER open 03:20:56 Received message from Camera: op=State serial=207708 03:20:56 GetSingleValue result=40 Value=cccccccc 03:20:56 SkyScan query 03:20:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:20:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:56 Parameters OK 03:20:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:56 Set A/D data flow result=40 03:20:56 Set A/D channel type result=40 03:20:56 Set A/D encoding result=40 03:20:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:56 Set channel filter=0.000000e+000 result=40 03:20:56 Config A/D Result=40 03:20:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:56 Get A/D filter: -9.255963e+061 result=40 03:20:56 Get A/D value=-858993460 result=40 03:20:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:56 Parameters OK 03:20:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:56 Set A/D data flow result=40 03:20:56 Set A/D channel type result=40 03:20:56 Set A/D encoding result=40 03:20:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:56 Set channel filter=0.000000e+000 result=40 03:20:56 Config A/D Result=40 03:20:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:56 Get A/D filter: -9.255963e+061 result=40 03:20:56 Get A/D value=-858993460 result=40 03:20:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:56 Aux= 03:20:56 Message to Camera, serial 207708 queued 03:21:05 Received message from Master: op=Shutter serial=207718 03:21:05 Shutter LASER close 03:21:05 Received message from Master: op=PointingHead serial=207722 03:21:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:21:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:21:05 Point started: ret=0 03:21:05 point_skyscan result=0 03:21:06 Check angles 03:21:06 SkyScan query 03:21:07 SkyScan query done: ret=0 az=90.06<-6004 ze=157.365<-1509 Statuses=0009 0009 03:21:07 Msec=0 True Az=90.06 Ze=157.365 Az status=0009 Ze status=0009 03:21:07 Check angles 03:21:07 SkyScan query 03:21:08 SkyScan query done: ret=0 az=72.555<-4837 ze=136.425<-2905 Statuses=0009 0009 03:21:08 Msec=750 True Az=72.555 Ze=136.425 Az status=0009 Ze status=0009 03:21:08 Check angles 03:21:08 SkyScan query 03:21:08 SkyScan query done: ret=0 az=55.215<-3681 ze=115.515<-4299 Statuses=0009 0009 03:21:08 Msec=1500 True Az=55.215 Ze=115.515 Az status=0009 Ze status=0009 03:21:08 Check angles 03:21:08 SkyScan query 03:21:09 SkyScan query done: ret=0 az=40.995<-2733 ze=94.5<-5700 Statuses=0009 0009 03:21:09 Msec=2250 True Az=40.995 Ze=94.5 Az status=0009 Ze status=0009 03:21:09 Check angles 03:21:09 SkyScan query 03:21:10 SkyScan query done: ret=0 az=40.98<-2732 ze=73.095<-7127 Statuses=0008 0009 03:21:10 Msec=3000 True Az=40.98 Ze=73.095 Az status=0008 Ze status=0009 03:21:10 Check angles 03:21:10 SkyScan query 03:21:11 SkyScan query done: ret=0 az=40.98<-2732 ze=52.65<-8490 Statuses=0008 0009 03:21:11 Msec=3750 True Az=40.98 Ze=52.65 Az status=0008 Ze status=0009 03:21:11 Check angles 03:21:11 SkyScan query 03:21:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:21:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:21:11 Message to Master queued w/err=0: serial=207722 error=0 03:21:16 Received message from Master: op=Filter serial=207723 03:21:16 Color wheel filter change from 0 to 0 03:21:16 FLIGetFilterPos err=0 currentPosition=0 03:21:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:16 Filter is already there-color wheel unchanged 03:21:16 Received message from Master: op=Shutter serial=207724 03:21:16 Shutter LASER close 03:21:17 Received message from Camera: op=State serial=207726 03:21:17 GetSingleValue result=40 Value=cccccccc 03:21:17 SkyScan query 03:21:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:21:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:17 Parameters OK 03:21:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:17 Set A/D data flow result=40 03:21:17 Set A/D channel type result=40 03:21:17 Set A/D encoding result=40 03:21:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:17 Set channel filter=0.000000e+000 result=40 03:21:17 Config A/D Result=40 03:21:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:17 Get A/D filter: -9.255963e+061 result=40 03:21:17 Get A/D value=-858993460 result=40 03:21:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:17 Parameters OK 03:21:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:17 Set A/D data flow result=40 03:21:17 Set A/D channel type result=40 03:21:17 Set A/D encoding result=40 03:21:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:17 Set channel filter=0.000000e+000 result=40 03:21:17 Config A/D Result=40 03:21:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:17 Get A/D filter: -9.255963e+061 result=40 03:21:17 Get A/D value=-858993460 result=40 03:21:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:17 Aux= 03:21:17 Message to Camera, serial 207726 queued 03:21:54 Received message from Master: op=PointingHead serial=207739 03:21:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:21:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:21:55 Point started: ret=0 03:21:55 point_skyscan result=0 03:21:55 Check angles 03:21:55 SkyScan query 03:21:56 SkyScan query done: ret=0 az=40.995<-2733 ze=21.75<-10550 Statuses=0008 0009 03:21:56 Msec=0 True Az=40.995 Ze=21.75 Az status=0008 Ze status=0009 03:21:56 Check angles 03:21:56 SkyScan query 03:21:57 SkyScan query done: ret=0 az=41.01<-2734 ze=0.3<-11980 Statuses=0008 0009 03:21:57 Msec=750 True Az=41.01 Ze=0.3 Az status=0008 Ze status=0009 03:21:57 Check angles 03:21:57 SkyScan query 03:21:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.655<-13377 Statuses=0008 0009 03:21:57 Msec=1500 True Az=40.995 Ze=-20.655 Az status=0008 Ze status=0009 03:21:58 Check angles 03:21:58 SkyScan query 03:21:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 03:21:58 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 03:21:58 Check angles 03:21:58 SkyScan query 03:21:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:21:59 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:21:59 Message to Master queued w/err=0: serial=207739 error=0 03:22:04 Received message from Master: op=Filter serial=207740 03:22:04 Color wheel filter change from 0 to 0 03:22:04 FLIGetFilterPos err=0 currentPosition=0 03:22:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:04 Filter is already there-color wheel unchanged 03:22:04 Received message from Master: op=Shutter serial=207741 03:22:04 Shutter LASER close 03:22:04 Received message from Camera: op=State serial=207743 03:22:04 GetSingleValue result=40 Value=cccccccc 03:22:04 SkyScan query 03:22:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:22:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:05 Parameters OK 03:22:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:05 Set A/D data flow result=40 03:22:05 Set A/D channel type result=40 03:22:05 Set A/D encoding result=40 03:22:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:05 Set channel filter=0.000000e+000 result=40 03:22:05 Config A/D Result=40 03:22:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:05 Get A/D filter: -9.255963e+061 result=40 03:22:05 Get A/D value=-858993460 result=40 03:22:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:05 Parameters OK 03:22:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:05 Set A/D data flow result=40 03:22:05 Set A/D channel type result=40 03:22:05 Set A/D encoding result=40 03:22:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:05 Set channel filter=0.000000e+000 result=40 03:22:05 Config A/D Result=40 03:22:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:05 Get A/D filter: -9.255963e+061 result=40 03:22:05 Get A/D value=-858993460 result=40 03:22:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:05 Aux= 03:22:05 Message to Camera, serial 207743 queued 03:22:41 Received message from Master: op=PointingHead serial=207755 03:22:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:22:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:22:41 Point started: ret=0 03:22:41 point_skyscan result=0 03:22:42 Check angles 03:22:42 SkyScan query 03:22:42 SkyScan query done: ret=0 az=64.35<-4290 ze=-68.685<-16579 Statuses=0009 0009 03:22:42 Msec=0 True Az=64.35 Ze=-68.685 Az status=0009 Ze status=0009 03:22:42 Check angles 03:22:42 SkyScan query 03:22:43 SkyScan query done: ret=0 az=81.87<-5458 ze=-89.655<-17977 Statuses=0009 0009 03:22:43 Msec=750 True Az=81.87 Ze=-89.655 Az status=0009 Ze status=0009 03:22:43 Check angles 03:22:43 SkyScan query 03:22:44 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.625<-19375 Statuses=0009 0009 03:22:44 Msec=1500 True Az=99.45 Ze=-110.625 Az status=0009 Ze status=0009 03:22:44 Check angles 03:22:44 SkyScan query 03:22:45 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.535<-20769 Statuses=0009 0009 03:22:45 Msec=2250 True Az=116.76 Ze=-131.535 Az status=0009 Ze status=0009 03:22:45 Check angles 03:22:45 SkyScan query 03:22:45 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 03:22:45 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 03:22:45 Check angles 03:22:45 SkyScan query 03:22:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:22:46 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:22:46 Message to Master queued w/err=0: serial=207755 error=0 03:22:51 Received message from Master: op=Filter serial=207756 03:22:51 Color wheel filter change from 0 to 0 03:22:51 FLIGetFilterPos err=0 currentPosition=0 03:22:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:51 Filter is already there-color wheel unchanged 03:22:51 Received message from Master: op=Shutter serial=207757 03:22:51 Shutter LASER close 03:22:51 Received message from Camera: op=State serial=207759 03:22:51 GetSingleValue result=40 Value=cccccccc 03:22:51 SkyScan query 03:22:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:22:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:52 Parameters OK 03:22:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:52 Set A/D data flow result=40 03:22:52 Set A/D channel type result=40 03:22:52 Set A/D encoding result=40 03:22:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:52 Set channel filter=0.000000e+000 result=40 03:22:52 Config A/D Result=40 03:22:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:52 Get A/D filter: -9.255963e+061 result=40 03:22:52 Get A/D value=-858993460 result=40 03:22:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:52 Parameters OK 03:22:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:52 Set A/D data flow result=40 03:22:52 Set A/D channel type result=40 03:22:52 Set A/D encoding result=40 03:22:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:52 Set channel filter=0.000000e+000 result=40 03:22:52 Config A/D Result=40 03:22:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:52 Get A/D filter: -9.255963e+061 result=40 03:22:52 Get A/D value=-858993460 result=40 03:22:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:52 Aux= 03:22:52 Message to Camera, serial 207759 queued 03:23:29 Received message from Master: op=PointingHead serial=207772 03:23:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:23:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:23:29 Point started: ret=0 03:23:29 point_skyscan result=0 03:23:30 Check angles 03:23:30 SkyScan query 03:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0009 0009 03:23:30 Msec=0 True Az=112.995 Ze=-170.985 Az status=0009 Ze status=0009 03:23:31 Check angles 03:23:31 SkyScan query 03:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:23:31 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:23:31 Message to Master queued w/err=0: serial=207772 error=0 03:23:36 Received message from Master: op=Filter serial=207773 03:23:36 Color wheel filter change from 0 to 0 03:23:36 FLIGetFilterPos err=0 currentPosition=0 03:23:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:36 Filter is already there-color wheel unchanged 03:23:36 Received message from Master: op=Shutter serial=207774 03:23:36 Shutter LASER open 03:23:36 Received message from Camera: op=State serial=207776 03:23:36 GetSingleValue result=40 Value=cccccccc 03:23:36 SkyScan query 03:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:23:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:37 Parameters OK 03:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:37 Set A/D data flow result=40 03:23:37 Set A/D channel type result=40 03:23:37 Set A/D encoding result=40 03:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:37 Set channel filter=0.000000e+000 result=40 03:23:37 Config A/D Result=40 03:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:37 Get A/D filter: -9.255963e+061 result=40 03:23:37 Get A/D value=-858993460 result=40 03:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:37 Parameters OK 03:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:37 Set A/D data flow result=40 03:23:37 Set A/D channel type result=40 03:23:37 Set A/D encoding result=40 03:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:37 Set channel filter=0.000000e+000 result=40 03:23:37 Config A/D Result=40 03:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:37 Get A/D filter: -9.255963e+061 result=40 03:23:37 Get A/D value=-858993460 result=40 03:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:37 Aux= 03:23:37 Message to Camera, serial 207776 queued 03:23:45 Received message from Master: op=Shutter serial=207786 03:23:45 Shutter LASER close 03:23:46 Received message from Master: op=PointingHead serial=207790 03:23:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:23:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:23:46 Point started: ret=0 03:23:46 point_skyscan result=0 03:23:47 Check angles 03:23:47 SkyScan query 03:23:48 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.89<-21526 Statuses=0009 0009 03:23:48 Msec=0 True Az=136.365 Ze=-142.89 Az status=0009 Ze status=0009 03:23:48 Check angles 03:23:48 SkyScan query 03:23:49 SkyScan query done: ret=0 az=154.17<-10278 ze=-121.515<-20101 Statuses=0009 0009 03:23:49 Msec=750 True Az=154.17 Ze=-121.515 Az status=0009 Ze status=0009 03:23:49 Check angles 03:23:49 SkyScan query 03:23:49 SkyScan query done: ret=0 az=171.6<-11440 ze=-100.44<-18696 Statuses=0009 0009 03:23:49 Msec=1500 True Az=171.6 Ze=-100.44 Az status=0009 Ze status=0009 03:23:49 Check angles 03:23:49 SkyScan query 03:23:50 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.53<-17302 Statuses=0008 0009 03:23:50 Msec=2250 True Az=176.01 Ze=-79.53 Az status=0008 Ze status=0009 03:23:50 Check angles 03:23:50 SkyScan query 03:23:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.575<-15905 Statuses=0008 0009 03:23:51 Msec=3000 True Az=176.01 Ze=-58.575 Az status=0008 Ze status=0009 03:23:51 Check angles 03:23:51 SkyScan query 03:23:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:23:52 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:23:52 Message to Master queued w/err=0: serial=207790 error=0 03:23:57 Received message from Master: op=Filter serial=207791 03:23:57 Color wheel filter change from 0 to 0 03:23:57 FLIGetFilterPos err=0 currentPosition=0 03:23:57 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:57 Filter is already there-color wheel unchanged 03:23:57 Received message from Master: op=Shutter serial=207792 03:23:57 Shutter LASER close 03:23:57 Received message from Camera: op=State serial=207794 03:23:57 GetSingleValue result=40 Value=cccccccc 03:23:57 SkyScan query 03:23:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:23:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:57 Parameters OK 03:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:57 Set A/D data flow result=40 03:23:57 Set A/D channel type result=40 03:23:57 Set A/D encoding result=40 03:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:57 Set channel filter=0.000000e+000 result=40 03:23:57 Config A/D Result=40 03:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:57 Get A/D filter: -9.255963e+061 result=40 03:23:57 Get A/D value=-858993460 result=40 03:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:57 Parameters OK 03:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:57 Set A/D data flow result=40 03:23:57 Set A/D channel type result=40 03:23:57 Set A/D encoding result=40 03:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:57 Set channel filter=0.000000e+000 result=40 03:23:57 Config A/D Result=40 03:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:57 Get A/D filter: -9.255963e+061 result=40 03:23:57 Get A/D value=-858993460 result=40 03:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:57 Aux= 03:23:57 Message to Camera, serial 207794 queued 03:24:34 Received message from Master: op=PointingHead serial=207807 03:24:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:24:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:24:35 Point started: ret=0 03:24:35 point_skyscan result=0 03:24:35 Check angles 03:24:35 SkyScan query 03:24:36 SkyScan query done: ret=0 az=152.895<-10193 ze=-21.615<-13441 Statuses=0009 0009 03:24:36 Msec=0 True Az=152.895 Ze=-21.615 Az status=0009 Ze status=0009 03:24:36 Check angles 03:24:36 SkyScan query 03:24:37 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.645<-12043 Statuses=0009 0009 03:24:37 Msec=750 True Az=135.42 Ze=-0.645 Az status=0009 Ze status=0009 03:24:37 Check angles 03:24:37 SkyScan query 03:24:37 SkyScan query done: ret=0 az=117.78<-7852 ze=20.31<-10646 Statuses=0009 0009 03:24:37 Msec=1500 True Az=117.78 Ze=20.31 Az status=0009 Ze status=0009 03:24:38 Check angles 03:24:38 SkyScan query 03:24:38 SkyScan query done: ret=0 az=100.44<-6696 ze=41.28<-9248 Statuses=0009 0009 03:24:38 Msec=2250 True Az=100.44 Ze=41.28 Az status=0009 Ze status=0009 03:24:38 Check angles 03:24:38 SkyScan query 03:24:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 03:24:39 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 03:24:39 Check angles 03:24:39 SkyScan query 03:24:40 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 03:24:40 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 03:24:40 Message to Master queued w/err=0: serial=207807 error=0 03:24:45 Received message from Master: op=Filter serial=207808 03:24:45 Color wheel filter change from 0 to 0 03:24:45 FLIGetFilterPos err=0 currentPosition=0 03:24:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:45 Filter is already there-color wheel unchanged 03:24:45 Received message from Master: op=Shutter serial=207809 03:24:45 Shutter LASER close 03:24:45 Received message from Camera: op=State serial=207811 03:24:45 GetSingleValue result=40 Value=cccccccc 03:24:45 SkyScan query 03:24:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:24:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:46 Parameters OK 03:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:46 Set A/D data flow result=40 03:24:46 Set A/D channel type result=40 03:24:46 Set A/D encoding result=40 03:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:46 Set channel filter=0.000000e+000 result=40 03:24:46 Config A/D Result=40 03:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:46 Get A/D filter: -9.255963e+061 result=40 03:24:46 Get A/D value=-858993460 result=40 03:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:46 Parameters OK 03:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:46 Set A/D data flow result=40 03:24:46 Set A/D channel type result=40 03:24:46 Set A/D encoding result=40 03:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:46 Set channel filter=0.000000e+000 result=40 03:24:46 Config A/D Result=40 03:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:46 Get A/D filter: -9.255963e+061 result=40 03:24:46 Get A/D value=-858993460 result=40 03:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:46 Aux= 03:24:46 Message to Camera, serial 207811 queued 03:25:22 Received message from Master: op=PointingHead serial=207824 03:25:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:25:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:25:23 Point started: ret=0 03:25:23 point_skyscan result=0 03:25:24 Check angles 03:25:24 SkyScan query 03:25:24 SkyScan query done: ret=0 az=85.995<-5733 ze=21.555<-10563 Statuses=0008 0009 03:25:24 Msec=0 True Az=85.995 Ze=21.555 Az status=0008 Ze status=0009 03:25:24 Check angles 03:25:24 SkyScan query 03:25:25 SkyScan query done: ret=0 az=85.995<-5733 ze=0.615<-11959 Statuses=0008 0009 03:25:25 Msec=750 True Az=85.995 Ze=0.615 Az status=0008 Ze status=0009 03:25:25 Check angles 03:25:25 SkyScan query 03:25:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.34<-13356 Statuses=0008 0009 03:25:26 Msec=1500 True Az=85.995 Ze=-20.34 Az status=0008 Ze status=0009 03:25:26 Check angles 03:25:26 SkyScan query 03:25:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.235<-14749 Statuses=0008 0009 03:25:26 Msec=2250 True Az=85.995 Ze=-41.235 Az status=0008 Ze status=0009 03:25:27 Check angles 03:25:27 SkyScan query 03:25:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:25:27 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:25:27 Message to Master queued w/err=0: serial=207824 error=0 03:25:32 Received message from Master: op=Filter serial=207825 03:25:32 Color wheel filter change from 0 to 0 03:25:32 FLIGetFilterPos err=0 currentPosition=0 03:25:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:32 Filter is already there-color wheel unchanged 03:25:32 Received message from Master: op=Shutter serial=207826 03:25:32 Shutter LASER close 03:25:32 Received message from Camera: op=State serial=207828 03:25:32 GetSingleValue result=40 Value=cccccccc 03:25:32 SkyScan query 03:25:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:25:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:33 Parameters OK 03:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:33 Set A/D data flow result=40 03:25:33 Set A/D channel type result=40 03:25:33 Set A/D encoding result=40 03:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:33 Set channel filter=0.000000e+000 result=40 03:25:33 Config A/D Result=40 03:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:33 Get A/D filter: -9.255963e+061 result=40 03:25:33 Get A/D value=-858993460 result=40 03:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:33 Parameters OK 03:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:33 Set A/D data flow result=40 03:25:33 Set A/D channel type result=40 03:25:33 Set A/D encoding result=40 03:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:33 Set channel filter=0.000000e+000 result=40 03:25:33 Config A/D Result=40 03:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:33 Get A/D filter: -9.255963e+061 result=40 03:25:33 Get A/D value=-858993460 result=40 03:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:33 Aux= 03:25:33 Message to Camera, serial 207828 queued 03:26:10 Received message from Master: op=PointingHead serial=207841 03:26:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:26:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:26:10 Point started: ret=0 03:26:10 point_skyscan result=0 03:26:11 Check angles 03:26:11 SkyScan query 03:26:11 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.555<-17437 Statuses=0009 0009 03:26:11 Msec=0 True Az=109.335 Ze=-81.555 Az status=0009 Ze status=0009 03:26:12 Check angles 03:26:12 SkyScan query 03:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 03:26:12 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 03:26:12 Check angles 03:26:12 SkyScan query 03:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 03:26:13 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 03:26:13 Check angles 03:26:13 SkyScan query 03:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 03:26:14 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 03:26:14 Check angles 03:26:14 SkyScan query 03:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 03:26:14 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 03:26:15 Check angles 03:26:15 SkyScan query 03:26:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:26:15 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:26:15 Message to Master queued w/err=0: serial=207841 error=0 03:26:20 Received message from Master: op=Filter serial=207842 03:26:20 Color wheel filter change from 0 to 0 03:26:20 FLIGetFilterPos err=0 currentPosition=0 03:26:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:20 Filter is already there-color wheel unchanged 03:26:20 Received message from Master: op=Shutter serial=207843 03:26:20 Shutter LASER open 03:26:21 Received message from Camera: op=State serial=207845 03:26:21 GetSingleValue result=40 Value=cccccccc 03:26:21 SkyScan query 03:26:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:26:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:21 Parameters OK [UTC 2018-12-17 03:26:21] 03:26:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:21 Set A/D data flow result=40 03:26:21 Set A/D channel type result=40 03:26:21 Set A/D encoding result=40 03:26:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:21 Set channel filter=0.000000e+000 result=40 03:26:21 Config A/D Result=40 03:26:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:21 Get A/D filter: -9.255963e+061 result=40 03:26:21 Get A/D value=-858993460 result=40 03:26:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:21 Parameters OK 03:26:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:21 Set A/D data flow result=40 03:26:21 Set A/D channel type result=40 03:26:21 Set A/D encoding result=40 03:26:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:21 Set channel filter=0.000000e+000 result=40 03:26:21 Config A/D Result=40 03:26:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:21 Get A/D filter: -9.255963e+061 result=40 03:26:21 Get A/D value=-858993460 result=40 03:26:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:21 Aux= 03:26:21 Message to Camera, serial 207845 queued 03:26:30 Received message from Master: op=Shutter serial=207855 03:26:30 Shutter LASER close 03:26:30 Received message from Master: op=PointingHead serial=207859 03:26:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:26:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:26:30 Point started: ret=0 03:26:30 point_skyscan result=0 03:26:31 Check angles 03:26:31 SkyScan query 03:26:32 SkyScan query done: ret=0 az=90<-6000 ze=157.335<-1511 Statuses=0009 0009 03:26:32 Msec=0 True Az=90 Ze=157.335 Az status=0009 Ze status=0009 03:26:32 Check angles 03:26:32 SkyScan query 03:26:32 SkyScan query done: ret=0 az=72.51<-4834 ze=136.365<-2909 Statuses=0009 0009 03:26:32 Msec=750 True Az=72.51 Ze=136.365 Az status=0009 Ze status=0009 03:26:33 Check angles 03:26:33 SkyScan query 03:26:33 SkyScan query done: ret=0 az=55.185<-3679 ze=115.47<-4302 Statuses=0009 0009 03:26:33 Msec=1500 True Az=55.185 Ze=115.47 Az status=0009 Ze status=0009 03:26:33 Check angles 03:26:33 SkyScan query 03:26:34 SkyScan query done: ret=0 az=41.025<-2735 ze=94.035<-5731 Statuses=0009 0009 03:26:34 Msec=2250 True Az=41.025 Ze=94.035 Az status=0009 Ze status=0009 03:26:34 Check angles 03:26:34 SkyScan query 03:26:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.02<-7132 Statuses=0008 0009 03:26:35 Msec=3000 True Az=40.995 Ze=73.02 Az status=0008 Ze status=0009 03:26:35 Check angles 03:26:35 SkyScan query 03:26:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 03:26:36 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 03:26:36 Check angles 03:26:36 SkyScan query 03:26:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:26:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:26:36 Message to Master queued w/err=0: serial=207859 error=0 03:26:41 Received message from Master: op=Filter serial=207860 03:26:41 Color wheel filter change from 0 to 0 03:26:41 FLIGetFilterPos err=0 currentPosition=0 03:26:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:41 Filter is already there-color wheel unchanged 03:26:41 Received message from Master: op=Shutter serial=207861 03:26:41 Shutter LASER close 03:26:42 Received message from Camera: op=State serial=207863 03:26:42 GetSingleValue result=40 Value=cccccccc 03:26:42 SkyScan query 03:26:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:26:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:42 Parameters OK 03:26:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:42 Set A/D data flow result=40 03:26:42 Set A/D channel type result=40 03:26:42 Set A/D encoding result=40 03:26:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:42 Set channel filter=0.000000e+000 result=40 03:26:42 Config A/D Result=40 03:26:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:42 Get A/D filter: -9.255963e+061 result=40 03:26:42 Get A/D value=-858993460 result=40 03:26:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:42 Parameters OK 03:26:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:42 Set A/D data flow result=40 03:26:42 Set A/D channel type result=40 03:26:42 Set A/D encoding result=40 03:26:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:42 Set channel filter=0.000000e+000 result=40 03:26:42 Config A/D Result=40 03:26:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:42 Get A/D filter: -9.255963e+061 result=40 03:26:42 Get A/D value=-858993460 result=40 03:26:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:42 Aux= 03:26:42 Message to Camera, serial 207863 queued 03:27:19 Received message from Master: op=PointingHead serial=207876 03:27:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:27:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:27:19 Point started: ret=0 03:27:19 point_skyscan result=0 03:27:20 Check angles 03:27:20 SkyScan query 03:27:21 SkyScan query done: ret=0 az=40.995<-2733 ze=21.18<-10588 Statuses=0008 0009 03:27:21 Msec=0 True Az=40.995 Ze=21.18 Az status=0008 Ze status=0009 03:27:21 Check angles 03:27:21 SkyScan query 03:27:22 SkyScan query done: ret=0 az=41.01<-2734 ze=0.195<-11987 Statuses=0008 0009 03:27:22 Msec=750 True Az=41.01 Ze=0.195 Az status=0008 Ze status=0009 03:27:22 Check angles 03:27:22 SkyScan query 03:27:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.21<-13414 Statuses=0008 0009 03:27:22 Msec=1500 True Az=40.995 Ze=-21.21 Az status=0008 Ze status=0009 03:27:22 Check angles 03:27:22 SkyScan query 03:27:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 03:27:23 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 03:27:23 Check angles 03:27:23 SkyScan query 03:27:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:27:24 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:27:24 Message to Master queued w/err=0: serial=207876 error=0 03:27:29 Received message from Master: op=Filter serial=207877 03:27:29 Color wheel filter change from 0 to 0 03:27:29 FLIGetFilterPos err=0 currentPosition=0 03:27:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:29 Filter is already there-color wheel unchanged 03:27:29 Received message from Master: op=Shutter serial=207878 03:27:29 Shutter LASER close 03:27:29 Received message from Camera: op=State serial=207880 03:27:29 GetSingleValue result=40 Value=cccccccc 03:27:29 SkyScan query 03:27:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:27:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:30 Parameters OK 03:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:30 Set A/D data flow result=40 03:27:30 Set A/D channel type result=40 03:27:30 Set A/D encoding result=40 03:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:30 Set channel filter=0.000000e+000 result=40 03:27:30 Config A/D Result=40 03:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:30 Get A/D filter: -9.255963e+061 result=40 03:27:30 Get A/D value=-858993460 result=40 03:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:30 Parameters OK 03:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:30 Set A/D data flow result=40 03:27:30 Set A/D channel type result=40 03:27:30 Set A/D encoding result=40 03:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:30 Set channel filter=0.000000e+000 result=40 03:27:30 Config A/D Result=40 03:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:30 Get A/D filter: -9.255963e+061 result=40 03:27:30 Get A/D value=-858993460 result=40 03:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:30 Aux= 03:27:30 Message to Camera, serial 207880 queued 03:28:06 Received message from Master: op=PointingHead serial=207893 03:28:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:28:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:28:07 Point started: ret=0 03:28:07 point_skyscan result=0 03:28:08 Check angles 03:28:08 SkyScan query 03:28:08 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.19<-16546 Statuses=0009 0009 03:28:08 Msec=0 True Az=63.87 Ze=-68.19 Az status=0009 Ze status=0009 03:28:08 Check angles 03:28:08 SkyScan query 03:28:09 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.1<-17940 Statuses=0009 0009 03:28:09 Msec=750 True Az=81.345 Ze=-89.1 Az status=0009 Ze status=0009 03:28:09 Check angles 03:28:09 SkyScan query 03:28:10 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.025<-19335 Statuses=0009 0009 03:28:10 Msec=1500 True Az=98.865 Ze=-110.025 Az status=0009 Ze status=0009 03:28:10 Check angles 03:28:10 SkyScan query 03:28:10 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.43<-20762 Statuses=0009 0009 03:28:10 Msec=2250 True Az=116.625 Ze=-131.43 Az status=0009 Ze status=0009 03:28:11 Check angles 03:28:11 SkyScan query 03:28:11 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 03:28:11 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 03:28:11 Check angles 03:28:11 SkyScan query 03:28:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:28:12 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:28:12 Message to Master queued w/err=0: serial=207893 error=0 03:28:17 Received message from Master: op=Filter serial=207894 03:28:17 Color wheel filter change from 0 to 0 03:28:17 FLIGetFilterPos err=0 currentPosition=0 03:28:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:17 Filter is already there-color wheel unchanged 03:28:17 Received message from Master: op=Shutter serial=207895 03:28:17 Shutter LASER close 03:28:17 Received message from Camera: op=State serial=207897 03:28:17 GetSingleValue result=40 Value=cccccccc 03:28:17 SkyScan query 03:28:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:28:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:18 Parameters OK 03:28:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:18 Set A/D data flow result=40 03:28:18 Set A/D channel type result=40 03:28:18 Set A/D encoding result=40 03:28:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:18 Set channel filter=0.000000e+000 result=40 03:28:18 Config A/D Result=40 03:28:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:18 Get A/D filter: -9.255963e+061 result=40 03:28:18 Get A/D value=-858993460 result=40 03:28:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:18 Parameters OK 03:28:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:18 Set A/D data flow result=40 03:28:18 Set A/D channel type result=40 03:28:18 Set A/D encoding result=40 03:28:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:18 Set channel filter=0.000000e+000 result=40 03:28:18 Config A/D Result=40 03:28:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:18 Get A/D filter: -9.255963e+061 result=40 03:28:18 Get A/D value=-858993460 result=40 03:28:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:18 Aux= 03:28:18 Message to Camera, serial 207897 queued 03:28:54 Received message from Master: op=PointingHead serial=207910 03:28:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:28:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:28:55 Point started: ret=0 03:28:55 point_skyscan result=0 03:28:56 Check angles 03:28:56 SkyScan query 03:28:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 03:28:56 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 03:28:56 Check angles 03:28:56 SkyScan query 03:28:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:28:57 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:28:57 Message to Master queued w/err=0: serial=207910 error=0 03:29:02 Received message from Master: op=Filter serial=207911 03:29:02 Color wheel filter change from 0 to 0 03:29:02 FLIGetFilterPos err=0 currentPosition=0 03:29:02 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:02 Filter is already there-color wheel unchanged 03:29:02 Received message from Master: op=Shutter serial=207912 03:29:02 Shutter LASER open 03:29:02 Received message from Camera: op=State serial=207914 03:29:02 GetSingleValue result=40 Value=cccccccc 03:29:02 SkyScan query 03:29:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:29:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:03 Parameters OK 03:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:03 Set A/D data flow result=40 03:29:03 Set A/D channel type result=40 03:29:03 Set A/D encoding result=40 03:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:03 Set channel filter=0.000000e+000 result=40 03:29:03 Config A/D Result=40 03:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:03 Get A/D filter: -9.255963e+061 result=40 03:29:03 Get A/D value=-858993460 result=40 03:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:03 Parameters OK 03:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:03 Set A/D data flow result=40 03:29:03 Set A/D channel type result=40 03:29:03 Set A/D encoding result=40 03:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:03 Set channel filter=0.000000e+000 result=40 03:29:03 Config A/D Result=40 03:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:03 Get A/D filter: -9.255963e+061 result=40 03:29:03 Get A/D value=-858993460 result=40 03:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:03 Aux= 03:29:03 Message to Camera, serial 207914 queued 03:29:11 Received message from Master: op=Shutter serial=207924 03:29:11 Shutter LASER close 03:29:12 Received message from Master: op=PointingHead serial=207928 03:29:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:29:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:29:12 Point started: ret=0 03:29:12 point_skyscan result=0 03:29:13 Check angles 03:29:13 SkyScan query 03:29:14 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.755<-21517 Statuses=0009 0009 03:29:14 Msec=0 True Az=136.41 Ze=-142.755 Az status=0009 Ze status=0009 03:29:14 Check angles 03:29:14 SkyScan query 03:29:14 SkyScan query done: ret=0 az=154.38<-10292 ze=-121.38<-20092 Statuses=0009 0009 03:29:14 Msec=750 True Az=154.38 Ze=-121.38 Az status=0009 Ze status=0009 03:29:15 Check angles 03:29:15 SkyScan query 03:29:15 SkyScan query done: ret=0 az=171.765<-11451 ze=-100.26<-18684 Statuses=0009 0009 03:29:15 Msec=1500 True Az=171.765 Ze=-100.26 Az status=0009 Ze status=0009 03:29:15 Check angles 03:29:15 SkyScan query 03:29:16 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.38<-17292 Statuses=0008 0009 03:29:16 Msec=2250 True Az=176.01 Ze=-79.38 Az status=0008 Ze status=0009 03:29:16 Check angles 03:29:16 SkyScan query 03:29:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.005<-15867 Statuses=0008 0009 03:29:17 Msec=3000 True Az=175.995 Ze=-58.005 Az status=0008 Ze status=0009 03:29:17 Check angles 03:29:17 SkyScan query 03:29:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:29:17 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:29:17 Message to Master queued w/err=0: serial=207928 error=0 03:29:22 Received message from Master: op=Filter serial=207929 03:29:22 Color wheel filter change from 0 to 0 03:29:22 FLIGetFilterPos err=0 currentPosition=0 03:29:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:22 Filter is already there-color wheel unchanged 03:29:23 Received message from Master: op=Shutter serial=207930 03:29:23 Shutter LASER close 03:29:23 Received message from Camera: op=State serial=207932 03:29:23 GetSingleValue result=40 Value=cccccccc 03:29:23 SkyScan query 03:29:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:29:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:23 Parameters OK 03:29:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:23 Set A/D data flow result=40 03:29:23 Set A/D channel type result=40 03:29:23 Set A/D encoding result=40 03:29:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:23 Set channel filter=0.000000e+000 result=40 03:29:23 Config A/D Result=40 03:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:23 Get A/D filter: -9.255963e+061 result=40 03:29:23 Get A/D value=-858993460 result=40 03:29:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:23 Parameters OK 03:29:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:23 Set A/D data flow result=40 03:29:23 Set A/D channel type result=40 03:29:23 Set A/D encoding result=40 03:29:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:23 Set channel filter=0.000000e+000 result=40 03:29:23 Config A/D Result=40 03:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:23 Get A/D filter: -9.255963e+061 result=40 03:29:23 Get A/D value=-858993460 result=40 03:29:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:23 Aux= 03:29:23 Message to Camera, serial 207932 queued 03:30:00 Received message from Master: op=PointingHead serial=207945 03:30:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:30:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:30:00 Point started: ret=0 03:30:00 point_skyscan result=0 03:30:01 Check angles 03:30:01 SkyScan query 03:30:02 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.93<-13462 Statuses=0009 0009 03:30:02 Msec=0 True Az=153.105 Ze=-21.93 Az status=0009 Ze status=0009 03:30:02 Check angles 03:30:02 SkyScan query 03:30:03 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.48<-12032 Statuses=0009 0009 03:30:03 Msec=750 True Az=135.315 Ze=-0.48 Az status=0009 Ze status=0009 03:30:03 Check angles 03:30:03 SkyScan query 03:30:03 SkyScan query done: ret=0 az=117.75<-7850 ze=20.46<-10636 Statuses=0009 0009 03:30:03 Msec=1500 True Az=117.75 Ze=20.46 Az status=0009 Ze status=0009 03:30:03 Check angles 03:30:03 SkyScan query 03:30:04 SkyScan query done: ret=0 az=100.395<-6693 ze=41.46<-9236 Statuses=0009 0009 03:30:04 Msec=2250 True Az=100.395 Ze=41.46 Az status=0009 Ze status=0009 03:30:04 Check angles 03:30:04 SkyScan query 03:30:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 03:30:05 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 03:30:05 Check angles 03:30:05 SkyScan query 03:30:06 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 03:30:06 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 03:30:06 Message to Master queued w/err=0: serial=207945 error=0 03:30:11 Received message from Master: op=Filter serial=207946 03:30:11 Color wheel filter change from 0 to 0 03:30:11 FLIGetFilterPos err=0 currentPosition=0 03:30:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:11 Filter is already there-color wheel unchanged 03:30:11 Received message from Master: op=Shutter serial=207947 03:30:11 Shutter LASER close 03:30:11 Received message from Camera: op=State serial=207949 03:30:11 GetSingleValue result=40 Value=cccccccc 03:30:11 SkyScan query 03:30:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:30:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:11 Parameters OK 03:30:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:11 Set A/D data flow result=40 03:30:11 Set A/D channel type result=40 03:30:11 Set A/D encoding result=40 03:30:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:11 Set channel filter=0.000000e+000 result=40 03:30:11 Config A/D Result=40 03:30:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:11 Get A/D filter: -9.255963e+061 result=40 03:30:11 Get A/D value=-858993460 result=40 03:30:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:11 Parameters OK 03:30:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:11 Set A/D data flow result=40 03:30:11 Set A/D channel type result=40 03:30:11 Set A/D encoding result=40 03:30:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:11 Set channel filter=0.000000e+000 result=40 03:30:11 Config A/D Result=40 03:30:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:11 Get A/D filter: -9.255963e+061 result=40 03:30:11 Get A/D value=-858993460 result=40 03:30:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:11 Aux= 03:30:11 Message to Camera, serial 207949 queued 03:30:48 Received message from Master: op=PointingHead serial=207962 03:30:48 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:30:48 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:30:49 Point started: ret=0 03:30:49 point_skyscan result=0 03:30:49 Check angles 03:30:49 SkyScan query 03:30:50 SkyScan query done: ret=0 az=85.995<-5733 ze=21.705<-10553 Statuses=0008 0009 03:30:50 Msec=0 True Az=85.995 Ze=21.705 Az status=0008 Ze status=0009 03:30:50 Check angles 03:30:50 SkyScan query 03:30:51 SkyScan query done: ret=0 az=85.995<-5733 ze=0.765<-11949 Statuses=0008 0009 03:30:51 Msec=750 True Az=85.995 Ze=0.765 Az status=0008 Ze status=0009 03:30:51 Check angles 03:30:51 SkyScan query 03:30:52 SkyScan query done: ret=0 az=85.98<-5732 ze=-20.655<-13377 Statuses=0008 0009 03:30:52 Msec=1500 True Az=85.98 Ze=-20.655 Az status=0008 Ze status=0009 03:30:52 Check angles 03:30:52 SkyScan query 03:30:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.565<-14771 Statuses=0008 0009 03:30:52 Msec=2250 True Az=85.995 Ze=-41.565 Az status=0008 Ze status=0009 03:30:53 Check angles 03:30:53 SkyScan query 03:30:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:30:53 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:30:53 Message to Master queued w/err=0: serial=207962 error=0 03:30:58 Received message from Master: op=Filter serial=207963 03:30:58 Color wheel filter change from 0 to 0 03:30:58 FLIGetFilterPos err=0 currentPosition=0 03:30:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:58 Filter is already there-color wheel unchanged 03:30:58 Received message from Master: op=Shutter serial=207964 03:30:58 Shutter LASER close 03:30:58 Received message from Camera: op=State serial=207966 03:30:58 GetSingleValue result=40 Value=cccccccc 03:30:58 SkyScan query 03:30:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:30:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:59 Parameters OK 03:30:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:59 Set A/D data flow result=40 03:30:59 Set A/D channel type result=40 03:30:59 Set A/D encoding result=40 03:30:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:59 Set channel filter=0.000000e+000 result=40 03:30:59 Config A/D Result=40 03:30:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:59 Get A/D filter: -9.255963e+061 result=40 03:30:59 Get A/D value=-858993460 result=40 03:30:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:59 Parameters OK 03:30:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:59 Set A/D data flow result=40 03:30:59 Set A/D channel type result=40 03:30:59 Set A/D encoding result=40 03:30:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:59 Set channel filter=0.000000e+000 result=40 03:30:59 Config A/D Result=40 03:30:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:59 Get A/D filter: -9.255963e+061 result=40 03:30:59 Get A/D value=-858993460 result=40 03:30:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:59 Aux= 03:30:59 Message to Camera, serial 207966 queued 03:31:36 Received message from Master: op=PointingHead serial=207979 03:31:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:31:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:31:36 Point started: ret=0 03:31:36 point_skyscan result=0 03:31:37 Check angles 03:31:37 SkyScan query 03:31:37 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.27<-17418 Statuses=0009 0009 03:31:37 Msec=0 True Az=109.11 Ze=-81.27 Az status=0009 Ze status=0009 03:31:38 Check angles 03:31:38 SkyScan query 03:31:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 03:31:38 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 03:31:38 Check angles 03:31:38 SkyScan query 03:31:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 03:31:39 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 03:31:39 Check angles 03:31:39 SkyScan query 03:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 03:31:40 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 03:31:40 Check angles 03:31:40 SkyScan query 03:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.395<-23093 Statuses=0008 0009 03:31:40 Msec=3000 True Az=112.995 Ze=-166.395 Az status=0008 Ze status=0009 03:31:41 Check angles 03:31:41 SkyScan query 03:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:31:41 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:31:41 Message to Master queued w/err=0: serial=207979 error=0 03:31:46 Received message from Master: op=Filter serial=207980 03:31:46 Color wheel filter change from 0 to 0 03:31:46 FLIGetFilterPos err=0 currentPosition=0 03:31:46 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:46 Filter is already there-color wheel unchanged 03:31:46 Received message from Master: op=Shutter serial=207981 03:31:46 Shutter LASER open 03:31:47 Received message from Camera: op=State serial=207983 03:31:47 GetSingleValue result=40 Value=cccccccc 03:31:47 SkyScan query 03:31:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:31:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:47 Parameters OK 03:31:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:47 Set A/D data flow result=40 03:31:47 Set A/D channel type result=40 03:31:47 Set A/D encoding result=40 03:31:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:47 Set channel filter=0.000000e+000 result=40 03:31:47 Config A/D Result=40 03:31:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:47 Get A/D filter: -9.255963e+061 result=40 03:31:47 Get A/D value=-858993460 result=40 03:31:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:47 Parameters OK 03:31:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:47 Set A/D data flow result=40 03:31:47 Set A/D channel type result=40 03:31:47 Set A/D encoding result=40 03:31:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:47 Set channel filter=0.000000e+000 result=40 03:31:47 Config A/D Result=40 03:31:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:47 Get A/D filter: -9.255963e+061 result=40 03:31:47 Get A/D value=-858993460 result=40 03:31:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:47 Aux= 03:31:47 Message to Camera, serial 207983 queued 03:31:56 Received message from Master: op=Shutter serial=207993 03:31:56 Shutter LASER close 03:31:56 Received message from Master: op=PointingHead serial=207997 03:31:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:31:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:31:56 Point started: ret=0 03:31:56 point_skyscan result=0 03:31:57 Check angles 03:31:57 SkyScan query 03:31:58 SkyScan query done: ret=0 az=89.625<-5975 ze=156.93<-1538 Statuses=0009 0009 03:31:58 Msec=0 True Az=89.625 Ze=156.93 Az status=0009 Ze status=0009 03:31:58 Check angles 03:31:58 SkyScan query 03:31:58 SkyScan query done: ret=0 az=72.03<-4802 ze=135.96<-2936 Statuses=0009 0009 03:31:58 Msec=750 True Az=72.03 Ze=135.96 Az status=0009 Ze status=0009 03:31:59 Check angles 03:31:59 SkyScan query 03:31:59 SkyScan query done: ret=0 az=54.72<-3648 ze=114.99<-4334 Statuses=0009 0009 03:31:59 Msec=1500 True Az=54.72 Ze=114.99 Az status=0009 Ze status=0009 03:31:59 Check angles 03:31:59 SkyScan query 03:32:00 SkyScan query done: ret=0 az=41.01<-2734 ze=94.035<-5731 Statuses=0009 0009 03:32:00 Msec=2250 True Az=41.01 Ze=94.035 Az status=0009 Ze status=0009 03:32:00 Check angles 03:32:00 SkyScan query 03:32:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 03:32:01 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 03:32:01 Check angles 03:32:01 SkyScan query 03:32:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.125<-8525 Statuses=0008 0009 03:32:01 Msec=3750 True Az=40.995 Ze=52.125 Az status=0008 Ze status=0009 03:32:02 Check angles 03:32:02 SkyScan query 03:32:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:32:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:32:02 Message to Master queued w/err=0: serial=207997 error=0 03:32:07 Received message from Master: op=Filter serial=207998 03:32:07 Color wheel filter change from 0 to 0 03:32:07 FLIGetFilterPos err=0 currentPosition=0 03:32:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:07 Filter is already there-color wheel unchanged 03:32:07 Received message from Master: op=Shutter serial=207999 03:32:07 Shutter LASER close 03:32:08 Received message from Camera: op=State serial=208001 03:32:08 GetSingleValue result=40 Value=cccccccc 03:32:08 SkyScan query 03:32:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:32:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:08 Parameters OK 03:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:08 Set A/D data flow result=40 03:32:08 Set A/D channel type result=40 03:32:08 Set A/D encoding result=40 03:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:08 Set channel filter=0.000000e+000 result=40 03:32:08 Config A/D Result=40 03:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:08 Get A/D filter: -9.255963e+061 result=40 03:32:08 Get A/D value=-858993460 result=40 03:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:08 Parameters OK 03:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:08 Set A/D data flow result=40 03:32:08 Set A/D channel type result=40 03:32:08 Set A/D encoding result=40 03:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:08 Set channel filter=0.000000e+000 result=40 03:32:08 Config A/D Result=40 03:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:08 Get A/D filter: -9.255963e+061 result=40 03:32:08 Get A/D value=-858993460 result=40 03:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:08 Aux= 03:32:08 Message to Camera, serial 208001 queued 03:32:45 Received message from Master: op=PointingHead serial=208014 03:32:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:32:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:32:45 Point started: ret=0 03:32:45 point_skyscan result=0 03:32:46 Check angles 03:32:46 SkyScan query 03:32:47 SkyScan query done: ret=0 az=40.995<-2733 ze=21.66<-10556 Statuses=0008 0009 03:32:47 Msec=0 True Az=40.995 Ze=21.66 Az status=0008 Ze status=0009 03:32:47 Check angles 03:32:47 SkyScan query 03:32:48 SkyScan query done: ret=0 az=41.01<-2734 ze=0.225<-11985 Statuses=0008 0009 03:32:48 Msec=750 True Az=41.01 Ze=0.225 Az status=0008 Ze status=0009 03:32:48 Check angles 03:32:48 SkyScan query 03:32:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.73<-13382 Statuses=0008 0009 03:32:48 Msec=1500 True Az=40.995 Ze=-20.73 Az status=0008 Ze status=0009 03:32:48 Check angles 03:32:48 SkyScan query 03:32:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 03:32:49 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 03:32:49 Check angles 03:32:49 SkyScan query 03:32:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:32:50 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:32:50 Message to Master queued w/err=0: serial=208014 error=0 03:32:55 Received message from Master: op=Filter serial=208015 03:32:55 Color wheel filter change from 0 to 0 03:32:55 FLIGetFilterPos err=0 currentPosition=0 03:32:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:55 Filter is already there-color wheel unchanged 03:32:55 Received message from Master: op=Shutter serial=208016 03:32:55 Shutter LASER close 03:32:55 Received message from Camera: op=State serial=208018 03:32:55 GetSingleValue result=40 Value=cccccccc 03:32:55 SkyScan query 03:32:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:32:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:56 Parameters OK 03:32:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:56 Set A/D data flow result=40 03:32:56 Set A/D channel type result=40 03:32:56 Set A/D encoding result=40 03:32:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:56 Set channel filter=0.000000e+000 result=40 03:32:56 Config A/D Result=40 03:32:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:56 Get A/D filter: -9.255963e+061 result=40 03:32:56 Get A/D value=-858993460 result=40 03:32:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:56 Parameters OK 03:32:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:56 Set A/D data flow result=40 03:32:56 Set A/D channel type result=40 03:32:56 Set A/D encoding result=40 03:32:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:56 Set channel filter=0.000000e+000 result=40 03:32:56 Config A/D Result=40 03:32:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:56 Get A/D filter: -9.255963e+061 result=40 03:32:56 Get A/D value=-858993460 result=40 03:32:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:56 Aux= 03:32:56 Message to Camera, serial 208018 queued 03:33:32 Received message from Master: op=PointingHead serial=208031 03:33:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:33:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:33:33 Point started: ret=0 03:33:33 point_skyscan result=0 03:33:34 Check angles 03:33:34 SkyScan query 03:33:34 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.565<-16571 Statuses=0009 0009 03:33:34 Msec=0 True Az=64.17 Ze=-68.565 Az status=0009 Ze status=0009 03:33:34 Check angles 03:33:34 SkyScan query 03:33:35 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.55<-17970 Statuses=0009 0009 03:33:35 Msec=750 True Az=81.645 Ze=-89.55 Az status=0009 Ze status=0009 03:33:35 Check angles 03:33:35 SkyScan query 03:33:36 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.52<-19368 Statuses=0009 0009 03:33:36 Msec=1500 True Az=99.21 Ze=-110.52 Az status=0009 Ze status=0009 03:33:36 Check angles 03:33:36 SkyScan query 03:33:36 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.865<-20791 Statuses=0009 0009 03:33:36 Msec=2250 True Az=117.075 Ze=-131.865 Az status=0009 Ze status=0009 03:33:37 Check angles 03:33:37 SkyScan query 03:33:37 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.555<-21437 Statuses=0009 0008 03:33:37 Msec=3000 True Az=131.085 Ze=-141.555 Az status=0009 Ze status=0008 03:33:37 Check angles 03:33:37 SkyScan query 03:33:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:33:38 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:33:38 Message to Master queued w/err=0: serial=208031 error=0 03:33:43 Received message from Master: op=Filter serial=208032 03:33:43 Color wheel filter change from 0 to 0 03:33:43 FLIGetFilterPos err=0 currentPosition=0 03:33:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:43 Filter is already there-color wheel unchanged 03:33:43 Received message from Master: op=Shutter serial=208033 03:33:43 Shutter LASER close 03:33:43 Received message from Camera: op=State serial=208035 03:33:43 GetSingleValue result=40 Value=cccccccc 03:33:43 SkyScan query 03:33:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:33:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:44 Parameters OK 03:33:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:44 Set A/D data flow result=40 03:33:44 Set A/D channel type result=40 03:33:44 Set A/D encoding result=40 03:33:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:44 Set channel filter=0.000000e+000 result=40 03:33:44 Config A/D Result=40 03:33:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:44 Get A/D filter: -9.255963e+061 result=40 03:33:44 Get A/D value=-858993460 result=40 03:33:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:44 Parameters OK 03:33:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:44 Set A/D data flow result=40 03:33:44 Set A/D channel type result=40 03:33:44 Set A/D encoding result=40 03:33:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:44 Set channel filter=0.000000e+000 result=40 03:33:44 Config A/D Result=40 03:33:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:44 Get A/D filter: -9.255963e+061 result=40 03:33:44 Get A/D value=-858993460 result=40 03:33:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:44 Aux= 03:33:44 Message to Camera, serial 208035 queued 03:34:21 Received message from Master: op=PointingHead serial=208048 03:34:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:34:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:34:21 Point started: ret=0 03:34:21 point_skyscan result=0 03:34:22 Check angles 03:34:22 SkyScan query 03:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0008 0009 03:34:22 Msec=0 True Az=112.995 Ze=-171.51 Az status=0008 Ze status=0009 03:34:22 Check angles 03:34:22 SkyScan query 03:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:34:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:34:23 Message to Master queued w/err=0: serial=208048 error=0 03:34:28 Received message from Master: op=Filter serial=208049 03:34:28 Color wheel filter change from 0 to 0 03:34:28 FLIGetFilterPos err=0 currentPosition=0 03:34:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:28 Filter is already there-color wheel unchanged 03:34:28 Received message from Master: op=Shutter serial=208050 03:34:28 Shutter LASER open 03:34:28 Received message from Camera: op=State serial=208052 03:34:28 GetSingleValue result=40 Value=cccccccc 03:34:28 SkyScan query 03:34:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:34:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:29 Parameters OK 03:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:29 Set A/D data flow result=40 03:34:29 Set A/D channel type result=40 03:34:29 Set A/D encoding result=40 03:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:29 Set channel filter=0.000000e+000 result=40 03:34:29 Config A/D Result=40 03:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:29 Get A/D filter: -9.255963e+061 result=40 03:34:29 Get A/D value=-858993460 result=40 03:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:29 Parameters OK 03:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:29 Set A/D data flow result=40 03:34:29 Set A/D channel type result=40 03:34:29 Set A/D encoding result=40 03:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:29 Set channel filter=0.000000e+000 result=40 03:34:29 Config A/D Result=40 03:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:29 Get A/D filter: -9.255963e+061 result=40 03:34:29 Get A/D value=-858993460 result=40 03:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:29 Aux= 03:34:29 Message to Camera, serial 208052 queued 03:34:37 Received message from Master: op=Shutter serial=208062 03:34:37 Shutter LASER close 03:34:38 Received message from Master: op=PointingHead serial=208066 03:34:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:34:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:34:38 Point started: ret=0 03:34:38 point_skyscan result=0 03:34:39 Check angles 03:34:39 SkyScan query 03:34:40 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.1<-21540 Statuses=0009 0009 03:34:40 Msec=0 True Az=136.17 Ze=-143.1 Az status=0009 Ze status=0009 03:34:40 Check angles 03:34:40 SkyScan query 03:34:40 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.13<-20142 Statuses=0009 0009 03:34:40 Msec=750 True Az=153.615 Ze=-122.13 Az status=0009 Ze status=0009 03:34:41 Check angles 03:34:41 SkyScan query 03:34:41 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.19<-18746 Statuses=0009 0009 03:34:41 Msec=1500 True Az=171.045 Ze=-101.19 Az status=0009 Ze status=0009 03:34:41 Check angles 03:34:41 SkyScan query 03:34:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.295<-17353 Statuses=0008 0009 03:34:42 Msec=2250 True Az=175.995 Ze=-80.295 Az status=0008 Ze status=0009 03:34:42 Check angles 03:34:42 SkyScan query 03:34:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.265<-15951 Statuses=0008 0009 03:34:43 Msec=3000 True Az=175.995 Ze=-59.265 Az status=0008 Ze status=0009 03:34:43 Check angles 03:34:43 SkyScan query 03:34:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:34:43 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:34:43 Message to Master queued w/err=0: serial=208066 error=0 03:34:48 Received message from Master: op=Filter serial=208067 03:34:48 Color wheel filter change from 0 to 0 03:34:48 FLIGetFilterPos err=0 currentPosition=0 03:34:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:48 Filter is already there-color wheel unchanged 03:34:49 Received message from Master: op=Shutter serial=208068 03:34:49 Shutter LASER close 03:34:49 Received message from Camera: op=State serial=208070 03:34:49 GetSingleValue result=40 Value=cccccccc 03:34:49 SkyScan query 03:34:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:34:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:49 Parameters OK 03:34:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:49 Set A/D data flow result=40 03:34:49 Set A/D channel type result=40 03:34:49 Set A/D encoding result=40 03:34:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:49 Set channel filter=0.000000e+000 result=40 03:34:49 Config A/D Result=40 03:34:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:49 Get A/D filter: -9.255963e+061 result=40 03:34:49 Get A/D value=-858993460 result=40 03:34:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:49 Parameters OK 03:34:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:49 Set A/D data flow result=40 03:34:49 Set A/D channel type result=40 03:34:49 Set A/D encoding result=40 03:34:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:49 Set channel filter=0.000000e+000 result=40 03:34:49 Config A/D Result=40 03:34:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:49 Get A/D filter: -9.255963e+061 result=40 03:34:49 Get A/D value=-858993460 result=40 03:34:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:49 Aux= 03:34:49 Message to Camera, serial 208070 queued 03:35:26 Received message from Master: op=PointingHead serial=208083 03:35:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:35:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:35:27 Point started: ret=0 03:35:27 point_skyscan result=0 03:35:27 Check angles 03:35:27 SkyScan query 03:35:28 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.33<-13422 Statuses=0009 0009 03:35:28 Msec=0 True Az=152.73 Ze=-21.33 Az status=0009 Ze status=0009 03:35:28 Check angles 03:35:28 SkyScan query 03:35:29 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.375<-12025 Statuses=0009 0009 03:35:29 Msec=750 True Az=135.21 Ze=-0.375 Az status=0009 Ze status=0009 03:35:29 Check angles 03:35:29 SkyScan query 03:35:29 SkyScan query done: ret=0 az=117.6<-7840 ze=20.61<-10626 Statuses=0009 0009 03:35:29 Msec=1500 True Az=117.6 Ze=20.61 Az status=0009 Ze status=0009 03:35:30 Check angles 03:35:30 SkyScan query 03:35:30 SkyScan query done: ret=0 az=100.365<-6691 ze=41.55<-9230 Statuses=0009 0009 03:35:30 Msec=2250 True Az=100.365 Ze=41.55 Az status=0009 Ze status=0009 03:35:30 Check angles 03:35:30 SkyScan query 03:35:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 03:35:31 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 03:35:31 Check angles 03:35:31 SkyScan query 03:35:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:35:32 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 03:35:32 Message to Master queued w/err=0: serial=208083 error=0 03:35:37 Received message from Master: op=Filter serial=208084 03:35:37 Color wheel filter change from 0 to 0 03:35:37 FLIGetFilterPos err=0 currentPosition=0 03:35:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:37 Filter is already there-color wheel unchanged 03:35:37 Received message from Master: op=Shutter serial=208085 03:35:37 Shutter LASER close 03:35:37 Received message from Camera: op=State serial=208087 03:35:37 GetSingleValue result=40 Value=cccccccc 03:35:37 SkyScan query 03:35:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:35:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:38 Parameters OK 03:35:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:38 Set A/D data flow result=40 03:35:38 Set A/D channel type result=40 03:35:38 Set A/D encoding result=40 03:35:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:38 Set channel filter=0.000000e+000 result=40 03:35:38 Config A/D Result=40 03:35:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:38 Get A/D filter: -9.255963e+061 result=40 03:35:38 Get A/D value=-858993460 result=40 03:35:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:38 Parameters OK 03:35:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:38 Set A/D data flow result=40 03:35:38 Set A/D channel type result=40 03:35:38 Set A/D encoding result=40 03:35:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:38 Set channel filter=0.000000e+000 result=40 03:35:38 Config A/D Result=40 03:35:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:38 Get A/D filter: -9.255963e+061 result=40 03:35:38 Get A/D value=-858993460 result=40 03:35:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:38 Aux= 03:35:38 Message to Camera, serial 208087 queued [UTC 2018-12-17 03:35:52] 03:36:15 Received message from Master: op=PointingHead serial=208100 03:36:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:36:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:36:15 Point started: ret=0 03:36:15 point_skyscan result=0 03:36:16 Check angles 03:36:16 SkyScan query 03:36:16 SkyScan query done: ret=0 az=85.995<-5733 ze=21.735<-10551 Statuses=0008 0009 03:36:16 Msec=0 True Az=85.995 Ze=21.735 Az status=0008 Ze status=0009 03:36:16 Check angles 03:36:16 SkyScan query 03:36:17 SkyScan query done: ret=0 az=85.995<-5733 ze=0.825<-11945 Statuses=0008 0009 03:36:17 Msec=750 True Az=85.995 Ze=0.825 Az status=0008 Ze status=0009 03:36:17 Check angles 03:36:17 SkyScan query 03:36:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.19<-13346 Statuses=0008 0009 03:36:18 Msec=1500 True Az=85.995 Ze=-20.19 Az status=0008 Ze status=0009 03:36:18 Check angles 03:36:18 SkyScan query 03:36:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.085<-14739 Statuses=0008 0009 03:36:18 Msec=2250 True Az=85.995 Ze=-41.085 Az status=0008 Ze status=0009 03:36:19 Check angles 03:36:19 SkyScan query 03:36:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:36:19 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:36:19 Message to Master queued w/err=0: serial=208100 error=0 03:36:24 Received message from Master: op=Filter serial=208101 03:36:24 Color wheel filter change from 0 to 0 03:36:24 FLIGetFilterPos err=0 currentPosition=0 03:36:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:24 Filter is already there-color wheel unchanged 03:36:24 Received message from Master: op=Shutter serial=208102 03:36:24 Shutter LASER close 03:36:24 Received message from Camera: op=State serial=208104 03:36:24 GetSingleValue result=40 Value=cccccccc 03:36:24 SkyScan query 03:36:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:36:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:25 Parameters OK 03:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:25 Set A/D data flow result=40 03:36:25 Set A/D channel type result=40 03:36:25 Set A/D encoding result=40 03:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:25 Set channel filter=0.000000e+000 result=40 03:36:25 Config A/D Result=40 03:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:25 Get A/D filter: -9.255963e+061 result=40 03:36:25 Get A/D value=-858993460 result=40 03:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:25 Parameters OK 03:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:25 Set A/D data flow result=40 03:36:25 Set A/D channel type result=40 03:36:25 Set A/D encoding result=40 03:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:25 Set channel filter=0.000000e+000 result=40 03:36:25 Config A/D Result=40 03:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:25 Get A/D filter: -9.255963e+061 result=40 03:36:25 Get A/D value=-858993460 result=40 03:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:25 Aux= 03:36:25 Message to Camera, serial 208104 queued 03:37:02 Received message from Master: op=PointingHead serial=208117 03:37:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:37:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:37:02 Point started: ret=0 03:37:02 point_skyscan result=0 03:37:03 Check angles 03:37:03 SkyScan query 03:37:03 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.42<-17428 Statuses=0009 0009 03:37:03 Msec=0 True Az=109.125 Ze=-81.42 Az status=0009 Ze status=0009 03:37:04 Check angles 03:37:04 SkyScan query 03:37:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 03:37:04 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 03:37:04 Check angles 03:37:04 SkyScan query 03:37:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 03:37:05 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 03:37:05 Check angles 03:37:05 SkyScan query 03:37:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.285<-21619 Statuses=0008 0009 03:37:06 Msec=2250 True Az=112.995 Ze=-144.285 Az status=0008 Ze status=0009 03:37:06 Check angles 03:37:06 SkyScan query 03:37:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 03:37:06 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 03:37:07 Check angles 03:37:07 SkyScan query 03:37:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:37:07 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:37:07 Message to Master queued w/err=0: serial=208117 error=0 03:37:12 Received message from Master: op=Filter serial=208118 03:37:12 Color wheel filter change from 0 to 0 03:37:12 FLIGetFilterPos err=0 currentPosition=0 03:37:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:12 Filter is already there-color wheel unchanged 03:37:12 Received message from Master: op=Shutter serial=208119 03:37:12 Shutter LASER open 03:37:13 Received message from Camera: op=State serial=208121 03:37:13 GetSingleValue result=40 Value=cccccccc 03:37:13 SkyScan query 03:37:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:37:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:13 Parameters OK 03:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:13 Set A/D data flow result=40 03:37:13 Set A/D channel type result=40 03:37:13 Set A/D encoding result=40 03:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:13 Set channel filter=0.000000e+000 result=40 03:37:13 Config A/D Result=40 03:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:13 Get A/D filter: -9.255963e+061 result=40 03:37:13 Get A/D value=-858993460 result=40 03:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:13 Parameters OK 03:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:13 Set A/D data flow result=40 03:37:13 Set A/D channel type result=40 03:37:13 Set A/D encoding result=40 03:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:13 Set channel filter=0.000000e+000 result=40 03:37:13 Config A/D Result=40 03:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:13 Get A/D filter: -9.255963e+061 result=40 03:37:13 Get A/D value=-858993460 result=40 03:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:13 Aux= 03:37:13 Message to Camera, serial 208121 queued 03:37:22 Received message from Master: op=Shutter serial=208131 03:37:22 Shutter LASER close 03:37:22 Received message from Master: op=PointingHead serial=208135 03:37:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:37:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:37:22 Point started: ret=0 03:37:22 point_skyscan result=0 03:37:23 Check angles 03:37:23 SkyScan query 03:37:24 SkyScan query done: ret=0 az=89.835<-5989 ze=157.245<-1517 Statuses=0009 0009 03:37:24 Msec=0 True Az=89.835 Ze=157.245 Az status=0009 Ze status=0009 03:37:24 Check angles 03:37:24 SkyScan query 03:37:24 SkyScan query done: ret=0 az=72.48<-4832 ze=136.29<-2914 Statuses=0009 0009 03:37:24 Msec=750 True Az=72.48 Ze=136.29 Az status=0009 Ze status=0009 03:37:25 Check angles 03:37:25 SkyScan query 03:37:25 SkyScan query done: ret=0 az=55.095<-3673 ze=115.365<-4309 Statuses=0009 0009 03:37:25 Msec=1500 True Az=55.095 Ze=115.365 Az status=0009 Ze status=0009 03:37:25 Check angles 03:37:25 SkyScan query 03:37:26 SkyScan query done: ret=0 az=40.95<-2730 ze=93.93<-5738 Statuses=0009 0009 03:37:26 Msec=2250 True Az=40.95 Ze=93.93 Az status=0009 Ze status=0009 03:37:26 Check angles 03:37:26 SkyScan query 03:37:27 SkyScan query done: ret=0 az=40.995<-2733 ze=72.93<-7138 Statuses=0008 0009 03:37:27 Msec=3000 True Az=40.995 Ze=72.93 Az status=0008 Ze status=0009 03:37:27 Check angles 03:37:27 SkyScan query 03:37:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 03:37:27 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 03:37:28 Check angles 03:37:28 SkyScan query 03:37:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:37:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:37:28 Message to Master queued w/err=0: serial=208135 error=0 03:37:33 Received message from Master: op=Filter serial=208136 03:37:33 Color wheel filter change from 0 to 0 03:37:33 FLIGetFilterPos err=0 currentPosition=0 03:37:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:33 Filter is already there-color wheel unchanged 03:37:33 Received message from Master: op=Shutter serial=208137 03:37:33 Shutter LASER close 03:37:34 Received message from Camera: op=State serial=208139 03:37:34 GetSingleValue result=40 Value=cccccccc 03:37:34 SkyScan query 03:37:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:37:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:34 Parameters OK 03:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:34 Set A/D data flow result=40 03:37:34 Set A/D channel type result=40 03:37:34 Set A/D encoding result=40 03:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:34 Set channel filter=0.000000e+000 result=40 03:37:34 Config A/D Result=40 03:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:34 Get A/D filter: -9.255963e+061 result=40 03:37:34 Get A/D value=-858993460 result=40 03:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:34 Parameters OK 03:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:34 Set A/D data flow result=40 03:37:34 Set A/D channel type result=40 03:37:34 Set A/D encoding result=40 03:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:34 Set channel filter=0.000000e+000 result=40 03:37:34 Config A/D Result=40 03:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:34 Get A/D filter: -9.255963e+061 result=40 03:37:34 Get A/D value=-858993460 result=40 03:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:34 Aux= 03:37:34 Message to Camera, serial 208139 queued 03:38:11 Received message from Master: op=PointingHead serial=208152 03:38:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:38:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:38:11 Point started: ret=0 03:38:11 point_skyscan result=0 03:38:12 Check angles 03:38:12 SkyScan query 03:38:13 SkyScan query done: ret=0 az=40.995<-2733 ze=21.315<-10579 Statuses=0008 0009 03:38:13 Msec=0 True Az=40.995 Ze=21.315 Az status=0008 Ze status=0009 03:38:13 Check angles 03:38:13 SkyScan query 03:38:14 SkyScan query done: ret=0 az=40.995<-2733 ze=0.315<-11979 Statuses=0008 0009 03:38:14 Msec=750 True Az=40.995 Ze=0.315 Az status=0008 Ze status=0009 03:38:14 Check angles 03:38:14 SkyScan query 03:38:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.64<-13376 Statuses=0008 0009 03:38:14 Msec=1500 True Az=40.995 Ze=-20.64 Az status=0008 Ze status=0009 03:38:15 Check angles 03:38:15 SkyScan query 03:38:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 03:38:15 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 03:38:15 Check angles 03:38:15 SkyScan query 03:38:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:38:16 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:38:16 Message to Master queued w/err=0: serial=208152 error=0 03:38:21 Received message from Master: op=Filter serial=208153 03:38:21 Color wheel filter change from 0 to 0 03:38:21 FLIGetFilterPos err=0 currentPosition=0 03:38:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:21 Filter is already there-color wheel unchanged 03:38:21 Received message from Master: op=Shutter serial=208154 03:38:21 Shutter LASER close 03:38:21 Received message from Camera: op=State serial=208156 03:38:21 GetSingleValue result=40 Value=cccccccc 03:38:21 SkyScan query 03:38:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:38:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:22 Parameters OK 03:38:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:22 Set A/D data flow result=40 03:38:22 Set A/D channel type result=40 03:38:22 Set A/D encoding result=40 03:38:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:22 Set channel filter=0.000000e+000 result=40 03:38:22 Config A/D Result=40 03:38:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:22 Get A/D filter: -9.255963e+061 result=40 03:38:22 Get A/D value=-858993460 result=40 03:38:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:22 Parameters OK 03:38:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:22 Set A/D data flow result=40 03:38:22 Set A/D channel type result=40 03:38:22 Set A/D encoding result=40 03:38:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:22 Set channel filter=0.000000e+000 result=40 03:38:22 Config A/D Result=40 03:38:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:22 Get A/D filter: -9.255963e+061 result=40 03:38:22 Get A/D value=-858993460 result=40 03:38:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:22 Aux= 03:38:22 Message to Camera, serial 208156 queued 03:38:58 Received message from Master: op=PointingHead serial=208169 03:38:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:38:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:38:59 Point started: ret=0 03:38:59 point_skyscan result=0 03:39:00 Check angles 03:39:00 SkyScan query 03:39:00 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.13<-16542 Statuses=0009 0009 03:39:00 Msec=0 True Az=63.84 Ze=-68.13 Az status=0009 Ze status=0009 03:39:00 Check angles 03:39:00 SkyScan query 03:39:01 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.115<-17941 Statuses=0009 0009 03:39:01 Msec=750 True Az=81.33 Ze=-89.115 Az status=0009 Ze status=0009 03:39:01 Check angles 03:39:01 SkyScan query 03:39:02 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.055<-19337 Statuses=0009 0009 03:39:02 Msec=1500 True Az=98.82 Ze=-110.055 Az status=0009 Ze status=0009 03:39:02 Check angles 03:39:02 SkyScan query 03:39:02 SkyScan query done: ret=0 az=116.235<-7749 ze=-131.04<-20736 Statuses=0009 0009 03:39:02 Msec=2250 True Az=116.235 Ze=-131.04 Az status=0009 Ze status=0009 03:39:03 Check angles 03:39:03 SkyScan query 03:39:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 03:39:03 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 03:39:03 Check angles 03:39:03 SkyScan query 03:39:04 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:39:04 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:39:04 Message to Master queued w/err=0: serial=208169 error=0 03:39:09 Received message from Master: op=Filter serial=208170 03:39:09 Color wheel filter change from 0 to 0 03:39:09 FLIGetFilterPos err=0 currentPosition=0 03:39:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:09 Filter is already there-color wheel unchanged 03:39:09 Received message from Master: op=Shutter serial=208171 03:39:09 Shutter LASER close 03:39:09 Received message from Camera: op=State serial=208173 03:39:09 GetSingleValue result=40 Value=cccccccc 03:39:09 SkyScan query 03:39:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:39:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:10 Parameters OK 03:39:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:10 Set A/D data flow result=40 03:39:10 Set A/D channel type result=40 03:39:10 Set A/D encoding result=40 03:39:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:10 Set channel filter=0.000000e+000 result=40 03:39:10 Config A/D Result=40 03:39:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:10 Get A/D filter: -9.255963e+061 result=40 03:39:10 Get A/D value=-858993460 result=40 03:39:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:10 Parameters OK 03:39:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:10 Set A/D data flow result=40 03:39:10 Set A/D channel type result=40 03:39:10 Set A/D encoding result=40 03:39:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:10 Set channel filter=0.000000e+000 result=40 03:39:10 Config A/D Result=40 03:39:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:10 Get A/D filter: -9.255963e+061 result=40 03:39:10 Get A/D value=-858993460 result=40 03:39:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:10 Aux= 03:39:10 Message to Camera, serial 208173 queued 03:39:47 Received message from Master: op=PointingHead serial=208186 03:39:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:39:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:39:47 Point started: ret=0 03:39:47 point_skyscan result=0 03:39:48 Check angles 03:39:48 SkyScan query 03:39:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 03:39:48 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 03:39:48 Check angles 03:39:48 SkyScan query 03:39:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:39:49 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:39:49 Message to Master queued w/err=0: serial=208186 error=0 03:39:54 Received message from Master: op=Filter serial=208187 03:39:54 Color wheel filter change from 0 to 0 03:39:54 FLIGetFilterPos err=0 currentPosition=0 03:39:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:54 Filter is already there-color wheel unchanged 03:39:54 Received message from Master: op=Shutter serial=208188 03:39:54 Shutter LASER open 03:39:54 Received message from Camera: op=State serial=208190 03:39:54 GetSingleValue result=40 Value=cccccccc 03:39:54 SkyScan query 03:39:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:39:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:55 Parameters OK 03:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:55 Set A/D data flow result=40 03:39:55 Set A/D channel type result=40 03:39:55 Set A/D encoding result=40 03:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:55 Set channel filter=0.000000e+000 result=40 03:39:55 Config A/D Result=40 03:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:55 Get A/D filter: -9.255963e+061 result=40 03:39:55 Get A/D value=-858993460 result=40 03:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:55 Parameters OK 03:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:55 Set A/D data flow result=40 03:39:55 Set A/D channel type result=40 03:39:55 Set A/D encoding result=40 03:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:55 Set channel filter=0.000000e+000 result=40 03:39:55 Config A/D Result=40 03:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:55 Get A/D filter: -9.255963e+061 result=40 03:39:55 Get A/D value=-858993460 result=40 03:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:55 Aux= 03:39:55 Message to Camera, serial 208190 queued 03:40:03 Received message from Master: op=Shutter serial=208200 03:40:03 Shutter LASER close 03:40:04 Received message from Master: op=PointingHead serial=208204 03:40:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:40:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:40:04 Point started: ret=0 03:40:04 point_skyscan result=0 03:40:05 Check angles 03:40:05 SkyScan query 03:40:06 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.34<-21556 Statuses=0009 0009 03:40:06 Msec=0 True Az=135.885 Ze=-143.34 Az status=0009 Ze status=0009 03:40:06 Check angles 03:40:06 SkyScan query 03:40:06 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.355<-20157 Statuses=0009 0009 03:40:06 Msec=750 True Az=153.495 Ze=-122.355 Az status=0009 Ze status=0009 03:40:07 Check angles 03:40:07 SkyScan query 03:40:07 SkyScan query done: ret=0 az=170.88<-11392 ze=-101.475<-18765 Statuses=0009 0009 03:40:07 Msec=1500 True Az=170.88 Ze=-101.475 Az status=0009 Ze status=0009 03:40:07 Check angles 03:40:07 SkyScan query 03:40:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.085<-17339 Statuses=0008 0009 03:40:08 Msec=2250 True Az=176.01 Ze=-80.085 Az status=0008 Ze status=0009 03:40:08 Check angles 03:40:08 SkyScan query 03:40:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.04<-15936 Statuses=0008 0009 03:40:09 Msec=3000 True Az=175.995 Ze=-59.04 Az status=0008 Ze status=0009 03:40:09 Check angles 03:40:09 SkyScan query 03:40:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:40:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:40:09 Message to Master queued w/err=0: serial=208204 error=0 03:40:14 Received message from Master: op=Filter serial=208205 03:40:14 Color wheel filter change from 0 to 0 03:40:14 FLIGetFilterPos err=0 currentPosition=0 03:40:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:14 Filter is already there-color wheel unchanged 03:40:15 Received message from Master: op=Shutter serial=208206 03:40:15 Shutter LASER close 03:40:15 Received message from Camera: op=State serial=208208 03:40:15 GetSingleValue result=40 Value=cccccccc 03:40:15 SkyScan query 03:40:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:40:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:15 Parameters OK 03:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:15 Set A/D data flow result=40 03:40:15 Set A/D channel type result=40 03:40:15 Set A/D encoding result=40 03:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:15 Set channel filter=0.000000e+000 result=40 03:40:15 Config A/D Result=40 03:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:15 Get A/D filter: -9.255963e+061 result=40 03:40:15 Get A/D value=-858993460 result=40 03:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:15 Parameters OK 03:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:15 Set A/D data flow result=40 03:40:15 Set A/D channel type result=40 03:40:15 Set A/D encoding result=40 03:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:15 Set channel filter=0.000000e+000 result=40 03:40:15 Config A/D Result=40 03:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:15 Get A/D filter: -9.255963e+061 result=40 03:40:15 Get A/D value=-858993460 result=40 03:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:15 Aux= 03:40:15 Message to Camera, serial 208208 queued 03:40:52 Received message from Master: op=PointingHead serial=208221 03:40:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:40:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:40:52 Point started: ret=0 03:40:52 point_skyscan result=0 03:40:53 Check angles 03:40:53 SkyScan query 03:40:54 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.975<-13465 Statuses=0009 0009 03:40:54 Msec=0 True Az=153.18 Ze=-21.975 Az status=0009 Ze status=0009 03:40:54 Check angles 03:40:54 SkyScan query 03:40:55 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.975<-12065 Statuses=0009 0009 03:40:55 Msec=750 True Az=135.75 Ze=-0.975 Az status=0009 Ze status=0009 03:40:55 Check angles 03:40:55 SkyScan query 03:40:55 SkyScan query done: ret=0 az=117.795<-7853 ze=20.4<-10640 Statuses=0009 0009 03:40:55 Msec=1500 True Az=117.795 Ze=20.4 Az status=0009 Ze status=0009 03:40:55 Check angles 03:40:55 SkyScan query 03:40:56 SkyScan query done: ret=0 az=100.065<-6671 ze=41.775<-9215 Statuses=0009 0009 03:40:56 Msec=2250 True Az=100.065 Ze=41.775 Az status=0009 Ze status=0009 03:40:56 Check angles 03:40:56 SkyScan query 03:40:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 03:40:57 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 03:40:57 Check angles 03:40:57 SkyScan query 03:40:58 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 03:40:58 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 03:40:58 Message to Master queued w/err=0: serial=208221 error=0 03:41:03 Received message from Master: op=Filter serial=208222 03:41:03 Color wheel filter change from 0 to 0 03:41:03 FLIGetFilterPos err=0 currentPosition=0 03:41:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:03 Filter is already there-color wheel unchanged 03:41:03 Received message from Master: op=Shutter serial=208223 03:41:03 Shutter LASER close 03:41:03 Received message from Camera: op=State serial=208225 03:41:03 GetSingleValue result=40 Value=cccccccc 03:41:03 SkyScan query 03:41:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:41:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:03 Parameters OK 03:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:03 Set A/D data flow result=40 03:41:03 Set A/D channel type result=40 03:41:03 Set A/D encoding result=40 03:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:03 Set channel filter=0.000000e+000 result=40 03:41:03 Config A/D Result=40 03:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:03 Get A/D filter: -9.255963e+061 result=40 03:41:03 Get A/D value=-858993460 result=40 03:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:03 Parameters OK 03:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:03 Set A/D data flow result=40 03:41:03 Set A/D channel type result=40 03:41:03 Set A/D encoding result=40 03:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:03 Set channel filter=0.000000e+000 result=40 03:41:03 Config A/D Result=40 03:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:03 Get A/D filter: -9.255963e+061 result=40 03:41:03 Get A/D value=-858993460 result=40 03:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:03 Aux= 03:41:03 Message to Camera, serial 208225 queued 03:41:40 Received message from Master: op=PointingHead serial=208238 03:41:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:41:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:41:41 Point started: ret=0 03:41:41 point_skyscan result=0 03:41:41 Check angles 03:41:41 SkyScan query 03:41:42 SkyScan query done: ret=0 az=85.995<-5733 ze=21.195<-10587 Statuses=0008 0009 03:41:42 Msec=0 True Az=85.995 Ze=21.195 Az status=0008 Ze status=0009 03:41:42 Check angles 03:41:42 SkyScan query 03:41:43 SkyScan query done: ret=0 az=86.01<-5734 ze=0.255<-11983 Statuses=0008 0009 03:41:43 Msec=750 True Az=86.01 Ze=0.255 Az status=0008 Ze status=0009 03:41:43 Check angles 03:41:43 SkyScan query 03:41:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.7<-13380 Statuses=0008 0009 03:41:43 Msec=1500 True Az=85.995 Ze=-20.7 Az status=0008 Ze status=0009 03:41:44 Check angles 03:41:44 SkyScan query 03:41:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.61<-14774 Statuses=0008 0009 03:41:44 Msec=2250 True Az=85.995 Ze=-41.61 Az status=0008 Ze status=0009 03:41:44 Check angles 03:41:44 SkyScan query 03:41:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:41:45 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:41:45 Message to Master queued w/err=0: serial=208238 error=0 03:41:50 Received message from Master: op=Filter serial=208239 03:41:50 Color wheel filter change from 0 to 0 03:41:50 FLIGetFilterPos err=0 currentPosition=0 03:41:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:50 Filter is already there-color wheel unchanged 03:41:50 Received message from Master: op=Shutter serial=208240 03:41:50 Shutter LASER close 03:41:50 Received message from Camera: op=State serial=208242 03:41:50 GetSingleValue result=40 Value=cccccccc 03:41:50 SkyScan query 03:41:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:41:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:51 Parameters OK 03:41:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:51 Set A/D data flow result=40 03:41:51 Set A/D channel type result=40 03:41:51 Set A/D encoding result=40 03:41:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:51 Set channel filter=0.000000e+000 result=40 03:41:51 Config A/D Result=40 03:41:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:51 Get A/D filter: -9.255963e+061 result=40 03:41:51 Get A/D value=-858993460 result=40 03:41:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:51 Parameters OK 03:41:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:51 Set A/D data flow result=40 03:41:51 Set A/D channel type result=40 03:41:51 Set A/D encoding result=40 03:41:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:51 Set channel filter=0.000000e+000 result=40 03:41:51 Config A/D Result=40 03:41:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:51 Get A/D filter: -9.255963e+061 result=40 03:41:51 Get A/D value=-858993460 result=40 03:41:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:51 Aux= 03:41:51 Message to Camera, serial 208242 queued 03:42:28 Received message from Master: op=PointingHead serial=208255 03:42:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:42:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:42:28 Point started: ret=0 03:42:28 point_skyscan result=0 03:42:29 Check angles 03:42:29 SkyScan query 03:42:29 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.51<-17434 Statuses=0009 0009 03:42:29 Msec=0 True Az=109.2 Ze=-81.51 Az status=0009 Ze status=0009 03:42:29 Check angles 03:42:29 SkyScan query 03:42:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 03:42:30 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 03:42:30 Check angles 03:42:30 SkyScan query 03:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 03:42:31 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 03:42:31 Check angles 03:42:31 SkyScan query 03:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 03:42:32 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 03:42:32 Check angles 03:42:32 SkyScan query 03:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.185<-23079 Statuses=0008 0009 03:42:32 Msec=3000 True Az=112.995 Ze=-166.185 Az status=0008 Ze status=0009 03:42:32 Check angles 03:42:32 SkyScan query 03:42:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:42:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:42:33 Message to Master queued w/err=0: serial=208255 error=0 03:42:38 Received message from Master: op=Filter serial=208256 03:42:38 Color wheel filter change from 0 to 0 03:42:38 FLIGetFilterPos err=0 currentPosition=0 03:42:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:38 Filter is already there-color wheel unchanged 03:42:38 Received message from Master: op=Shutter serial=208257 03:42:38 Shutter LASER open 03:42:38 Received message from Camera: op=State serial=208259 03:42:38 GetSingleValue result=40 Value=cccccccc 03:42:38 SkyScan query 03:42:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:42:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:39 Parameters OK 03:42:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:39 Set A/D data flow result=40 03:42:39 Set A/D channel type result=40 03:42:39 Set A/D encoding result=40 03:42:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:39 Set channel filter=0.000000e+000 result=40 03:42:39 Config A/D Result=40 03:42:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:39 Get A/D filter: -9.255963e+061 result=40 03:42:39 Get A/D value=-858993460 result=40 03:42:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:39 Parameters OK 03:42:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:39 Set A/D data flow result=40 03:42:39 Set A/D channel type result=40 03:42:39 Set A/D encoding result=40 03:42:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:39 Set channel filter=0.000000e+000 result=40 03:42:39 Config A/D Result=40 03:42:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:39 Get A/D filter: -9.255963e+061 result=40 03:42:39 Get A/D value=-858993460 result=40 03:42:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:39 Aux= 03:42:39 Message to Camera, serial 208259 queued 03:42:47 Received message from Master: op=Shutter serial=208269 03:42:47 Shutter LASER close 03:42:48 Received message from Master: op=PointingHead serial=208273 03:42:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:42:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:42:48 Point started: ret=0 03:42:48 point_skyscan result=0 03:42:49 Check angles 03:42:49 SkyScan query 03:42:50 SkyScan query done: ret=0 az=90.15<-6010 ze=157.485<-1501 Statuses=0009 0009 03:42:50 Msec=0 True Az=90.15 Ze=157.485 Az status=0009 Ze status=0009 03:42:50 Check angles 03:42:50 SkyScan query 03:42:50 SkyScan query done: ret=0 az=72.27<-4818 ze=136.095<-2927 Statuses=0009 0009 03:42:50 Msec=750 True Az=72.27 Ze=136.095 Az status=0009 Ze status=0009 03:42:50 Check angles 03:42:50 SkyScan query 03:42:51 SkyScan query done: ret=0 az=54.585<-3639 ze=114.645<-4357 Statuses=0009 0009 03:42:51 Msec=1500 True Az=54.585 Ze=114.645 Az status=0009 Ze status=0009 03:42:51 Check angles 03:42:51 SkyScan query 03:42:52 SkyScan query done: ret=0 az=41.01<-2734 ze=93.735<-5751 Statuses=0009 0009 03:42:52 Msec=2250 True Az=41.01 Ze=93.735 Az status=0009 Ze status=0009 03:42:52 Check angles 03:42:52 SkyScan query 03:42:53 SkyScan query done: ret=0 az=40.98<-2732 ze=72.33<-7178 Statuses=0008 0009 03:42:53 Msec=3000 True Az=40.98 Ze=72.33 Az status=0008 Ze status=0009 03:42:53 Check angles 03:42:53 SkyScan query 03:42:53 SkyScan query done: ret=0 az=40.98<-2732 ze=52.02<-8532 Statuses=0008 0009 03:42:53 Msec=3750 True Az=40.98 Ze=52.02 Az status=0008 Ze status=0009 03:42:54 Check angles 03:42:54 SkyScan query 03:42:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:42:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:42:54 Message to Master queued w/err=0: serial=208273 error=0 03:42:59 Received message from Master: op=Filter serial=208274 03:42:59 Color wheel filter change from 0 to 0 03:42:59 FLIGetFilterPos err=0 currentPosition=0 03:42:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:59 Filter is already there-color wheel unchanged 03:42:59 Received message from Master: op=Shutter serial=208275 03:42:59 Shutter LASER close 03:42:59 Received message from Camera: op=State serial=208277 03:42:59 GetSingleValue result=40 Value=cccccccc 03:42:59 SkyScan query 03:43:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:43:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:00 Parameters OK 03:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:00 Set A/D data flow result=40 03:43:00 Set A/D channel type result=40 03:43:00 Set A/D encoding result=40 03:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:00 Set channel filter=0.000000e+000 result=40 03:43:00 Config A/D Result=40 03:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:00 Get A/D filter: -9.255963e+061 result=40 03:43:00 Get A/D value=-858993460 result=40 03:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:00 Parameters OK 03:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:00 Set A/D data flow result=40 03:43:00 Set A/D channel type result=40 03:43:00 Set A/D encoding result=40 03:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:00 Set channel filter=0.000000e+000 result=40 03:43:00 Config A/D Result=40 03:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:00 Get A/D filter: -9.255963e+061 result=40 03:43:00 Get A/D value=-858993460 result=40 03:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:00 Aux= 03:43:00 Message to Camera, serial 208277 queued 03:43:37 Received message from Master: op=PointingHead serial=208290 03:43:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:43:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:43:37 Point started: ret=0 03:43:37 point_skyscan result=0 03:43:38 Check angles 03:43:38 SkyScan query 03:43:39 SkyScan query done: ret=0 az=40.995<-2733 ze=21.945<-10537 Statuses=0008 0009 03:43:39 Msec=0 True Az=40.995 Ze=21.945 Az status=0008 Ze status=0009 03:43:39 Check angles 03:43:39 SkyScan query 03:43:39 SkyScan query done: ret=0 az=40.98<-2732 ze=1.005<-11933 Statuses=0008 0009 03:43:39 Msec=750 True Az=40.98 Ze=1.005 Az status=0008 Ze status=0009 03:43:40 Check angles 03:43:40 SkyScan query 03:43:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-19.935<-13329 Statuses=0008 0009 03:43:40 Msec=1500 True Az=40.995 Ze=-19.935 Az status=0008 Ze status=0009 03:43:40 Check angles 03:43:40 SkyScan query 03:43:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 03:43:41 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 03:43:41 Check angles 03:43:41 SkyScan query 03:43:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:43:42 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:43:42 Message to Master queued w/err=0: serial=208290 error=0 03:43:47 Received message from Master: op=Filter serial=208291 03:43:47 Color wheel filter change from 0 to 0 03:43:47 FLIGetFilterPos err=0 currentPosition=0 03:43:47 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:47 Filter is already there-color wheel unchanged 03:43:47 Received message from Master: op=Shutter serial=208292 03:43:47 Shutter LASER close 03:43:47 Received message from Camera: op=State serial=208294 03:43:47 GetSingleValue result=40 Value=cccccccc 03:43:47 SkyScan query 03:43:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:43:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:48 Parameters OK 03:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:48 Set A/D data flow result=40 03:43:48 Set A/D channel type result=40 03:43:48 Set A/D encoding result=40 03:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:48 Set channel filter=0.000000e+000 result=40 03:43:48 Config A/D Result=40 03:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:48 Get A/D filter: -9.255963e+061 result=40 03:43:48 Get A/D value=-858993460 result=40 03:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:48 Parameters OK 03:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:48 Set A/D data flow result=40 03:43:48 Set A/D channel type result=40 03:43:48 Set A/D encoding result=40 03:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:48 Set channel filter=0.000000e+000 result=40 03:43:48 Config A/D Result=40 03:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:48 Get A/D filter: -9.255963e+061 result=40 03:43:48 Get A/D value=-858993460 result=40 03:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:48 Aux= 03:43:48 Message to Camera, serial 208294 queued 03:44:23 Received message from Master: op=PointingHead serial=208306 03:44:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:44:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:44:24 Point started: ret=0 03:44:24 point_skyscan result=0 03:44:24 Check angles 03:44:24 SkyScan query 03:44:25 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.505<-16567 Statuses=0009 0009 03:44:25 Msec=0 True Az=64.095 Ze=-68.505 Az status=0009 Ze status=0009 03:44:25 Check angles 03:44:25 SkyScan query 03:44:26 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.775<-17985 Statuses=0009 0009 03:44:26 Msec=750 True Az=81.855 Ze=-89.775 Az status=0009 Ze status=0009 03:44:26 Check angles 03:44:26 SkyScan query 03:44:27 SkyScan query done: ret=0 az=99.765<-6651 ze=-111.165<-19411 Statuses=0009 0009 03:44:27 Msec=1500 True Az=99.765 Ze=-111.165 Az status=0009 Ze status=0009 03:44:27 Check angles 03:44:27 SkyScan query 03:44:27 SkyScan query done: ret=0 az=117.36<-7824 ze=-132.51<-20834 Statuses=0009 0009 03:44:27 Msec=2250 True Az=117.36 Ze=-132.51 Az status=0009 Ze status=0009 03:44:28 Check angles 03:44:28 SkyScan query 03:44:28 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 03:44:28 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 03:44:28 Check angles 03:44:28 SkyScan query 03:44:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:44:29 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:44:29 Message to Master queued w/err=0: serial=208306 error=0 03:44:34 Received message from Master: op=Filter serial=208307 03:44:34 Color wheel filter change from 0 to 0 03:44:34 FLIGetFilterPos err=0 currentPosition=0 03:44:34 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:34 Filter is already there-color wheel unchanged 03:44:34 Received message from Master: op=Shutter serial=208308 03:44:34 Shutter LASER close 03:44:34 Received message from Camera: op=State serial=208310 03:44:34 GetSingleValue result=40 Value=cccccccc 03:44:34 SkyScan query 03:44:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:44:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:35 Parameters OK 03:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:35 Set A/D data flow result=40 03:44:35 Set A/D channel type result=40 03:44:35 Set A/D encoding result=40 03:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:35 Set channel filter=0.000000e+000 result=40 03:44:35 Config A/D Result=40 03:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:35 Get A/D filter: -9.255963e+061 result=40 03:44:35 Get A/D value=-858993460 result=40 03:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:35 Parameters OK 03:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:35 Set A/D data flow result=40 03:44:35 Set A/D channel type result=40 03:44:35 Set A/D encoding result=40 03:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:35 Set channel filter=0.000000e+000 result=40 03:44:35 Config A/D Result=40 03:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:35 Get A/D filter: -9.255963e+061 result=40 03:44:35 Get A/D value=-858993460 result=40 03:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:35 Aux= 03:44:35 Message to Camera, serial 208310 queued 03:45:11 Received message from Master: op=PointingHead serial=208323 03:45:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:45:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:45:12 Point started: ret=0 03:45:12 point_skyscan result=0 03:45:13 Check angles 03:45:13 SkyScan query 03:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0009 0009 03:45:13 Msec=0 True Az=112.995 Ze=-171.3 Az status=0009 Ze status=0009 03:45:13 Check angles 03:45:13 SkyScan query 03:45:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:45:14 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:45:14 Message to Master queued w/err=0: serial=208323 error=0 03:45:19 Received message from Master: op=Filter serial=208324 03:45:19 Color wheel filter change from 0 to 0 03:45:19 FLIGetFilterPos err=0 currentPosition=0 03:45:19 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:19 Filter is already there-color wheel unchanged 03:45:19 Received message from Master: op=Shutter serial=208325 03:45:19 Shutter LASER open 03:45:19 Received message from Camera: op=State serial=208327 03:45:19 GetSingleValue result=40 Value=cccccccc 03:45:19 SkyScan query 03:45:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:45:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:20 Parameters OK 03:45:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:20 Set A/D data flow result=40 03:45:20 Set A/D channel type result=40 03:45:20 Set A/D encoding result=40 03:45:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:20 Set channel filter=0.000000e+000 result=40 03:45:20 Config A/D Result=40 03:45:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:20 Get A/D filter: -9.255963e+061 result=40 03:45:20 Get A/D value=-858993460 result=40 03:45:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:20 Parameters OK 03:45:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:20 Set A/D data flow result=40 03:45:20 Set A/D channel type result=40 03:45:20 Set A/D encoding result=40 03:45:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:20 Set channel filter=0.000000e+000 result=40 03:45:20 Config A/D Result=40 03:45:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:20 Get A/D filter: -9.255963e+061 result=40 03:45:20 Get A/D value=-858993460 result=40 03:45:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:20 Aux= 03:45:20 Message to Camera, serial 208327 queued 03:45:27 Received message from Master: op=Identify serial=208335 03:45:28 Received message from Master: op=Shutter serial=208340 03:45:28 Shutter LASER close 03:45:29 Received message from Master: op=PointingHead serial=208344 03:45:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:45:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:45:29 Point started: ret=0 03:45:29 point_skyscan result=0 03:45:30 Check angles 03:45:30 SkyScan query 03:45:31 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.19<-21546 Statuses=0009 0009 03:45:31 Msec=0 True Az=136.005 Ze=-143.19 Az status=0009 Ze status=0009 03:45:31 Check angles 03:45:31 SkyScan query 03:45:31 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.19<-20146 Statuses=0009 0009 03:45:31 Msec=750 True Az=153.525 Ze=-122.19 Az status=0009 Ze status=0009 03:45:32 Check angles 03:45:32 SkyScan query 03:45:32 SkyScan query done: ret=0 az=171.465<-11431 ze=-100.755<-18717 Statuses=0009 0009 03:45:32 Msec=1500 True Az=171.465 Ze=-100.755 Az status=0009 Ze status=0009 03:45:32 Check angles 03:45:32 SkyScan query 03:45:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.41<-17294 Statuses=0008 0009 03:45:33 Msec=2250 True Az=175.995 Ze=-79.41 Az status=0008 Ze status=0009 03:45:33 Check angles 03:45:33 SkyScan query 03:45:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 03:45:34 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 03:45:34 Check angles 03:45:34 SkyScan query 03:45:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:45:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:45:34 Message to Master queued w/err=0: serial=208344 error=0 03:45:39 Received message from Master: op=Filter serial=208345 03:45:39 Color wheel filter change from 0 to 0 03:45:39 FLIGetFilterPos err=0 currentPosition=0 03:45:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:39 Filter is already there-color wheel unchanged 03:45:40 Received message from Master: op=Shutter serial=208346 [UTC 2018-12-17 03:45:40] 03:45:40 Shutter LASER close 03:45:40 Received message from Camera: op=State serial=208348 03:45:40 GetSingleValue result=40 Value=cccccccc 03:45:40 SkyScan query 03:45:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:45:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:40 Parameters OK 03:45:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:40 Set A/D data flow result=40 03:45:40 Set A/D channel type result=40 03:45:40 Set A/D encoding result=40 03:45:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:40 Set channel filter=0.000000e+000 result=40 03:45:40 Config A/D Result=40 03:45:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:40 Get A/D filter: -9.255963e+061 result=40 03:45:40 Get A/D value=-858993460 result=40 03:45:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:40 Parameters OK 03:45:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:40 Set A/D data flow result=40 03:45:40 Set A/D channel type result=40 03:45:40 Set A/D encoding result=40 03:45:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:40 Set channel filter=0.000000e+000 result=40 03:45:40 Config A/D Result=40 03:45:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:40 Get A/D filter: -9.255963e+061 result=40 03:45:40 Get A/D value=-858993460 result=40 03:45:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:40 Aux= 03:45:40 Message to Camera, serial 208348 queued 03:46:17 Received message from Master: op=PointingHead serial=208361 03:46:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:46:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:46:17 Point started: ret=0 03:46:17 point_skyscan result=0 03:46:18 Check angles 03:46:18 SkyScan query 03:46:19 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.035<-13469 Statuses=0009 0009 03:46:19 Msec=0 True Az=153.225 Ze=-22.035 Az status=0009 Ze status=0009 03:46:19 Check angles 03:46:19 SkyScan query 03:46:20 SkyScan query done: ret=0 az=135.825<-9055 ze=-1.035<-12069 Statuses=0009 0009 03:46:20 Msec=750 True Az=135.825 Ze=-1.035 Az status=0009 Ze status=0009 03:46:20 Check angles 03:46:20 SkyScan query 03:46:20 SkyScan query done: ret=0 az=118.215<-7881 ze=19.86<-10676 Statuses=0009 0009 03:46:20 Msec=1500 True Az=118.215 Ze=19.86 Az status=0009 Ze status=0009 03:46:20 Check angles 03:46:20 SkyScan query 03:46:21 SkyScan query done: ret=0 az=100.875<-6725 ze=40.875<-9275 Statuses=0009 0009 03:46:21 Msec=2250 True Az=100.875 Ze=40.875 Az status=0009 Ze status=0009 03:46:21 Check angles 03:46:21 SkyScan query 03:46:22 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 03:46:22 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 03:46:22 Check angles 03:46:22 SkyScan query 03:46:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 03:46:23 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 03:46:23 Message to Master queued w/err=0: serial=208361 error=0 03:46:28 Received message from Master: op=Filter serial=208362 03:46:28 Color wheel filter change from 0 to 0 03:46:28 FLIGetFilterPos err=0 currentPosition=0 03:46:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:28 Filter is already there-color wheel unchanged 03:46:28 Received message from Master: op=Shutter serial=208363 03:46:28 Shutter LASER close 03:46:28 Received message from Camera: op=State serial=208365 03:46:28 GetSingleValue result=40 Value=cccccccc 03:46:28 SkyScan query 03:46:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 03:46:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:28 Parameters OK 03:46:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:28 Set A/D data flow result=40 03:46:28 Set A/D channel type result=40 03:46:28 Set A/D encoding result=40 03:46:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:28 Set channel filter=0.000000e+000 result=40 03:46:28 Config A/D Result=40 03:46:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:28 Get A/D filter: -9.255963e+061 result=40 03:46:28 Get A/D value=-858993460 result=40 03:46:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:28 Parameters OK 03:46:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:28 Set A/D data flow result=40 03:46:28 Set A/D channel type result=40 03:46:28 Set A/D encoding result=40 03:46:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:28 Set channel filter=0.000000e+000 result=40 03:46:28 Config A/D Result=40 03:46:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:28 Get A/D filter: -9.255963e+061 result=40 03:46:28 Get A/D value=-858993460 result=40 03:46:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:28 Aux= 03:46:28 Message to Camera, serial 208365 queued 03:47:05 Received message from Master: op=PointingHead serial=208378 03:47:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:47:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:47:06 Point started: ret=0 03:47:06 point_skyscan result=0 03:47:06 Check angles 03:47:06 SkyScan query 03:47:07 SkyScan query done: ret=0 az=85.995<-5733 ze=21.24<-10584 Statuses=0008 0009 03:47:07 Msec=0 True Az=85.995 Ze=21.24 Az status=0008 Ze status=0009 03:47:07 Check angles 03:47:07 SkyScan query 03:47:08 SkyScan query done: ret=0 az=86.01<-5734 ze=0.315<-11979 Statuses=0008 0009 03:47:08 Msec=750 True Az=86.01 Ze=0.315 Az status=0008 Ze status=0009 03:47:08 Check angles 03:47:08 SkyScan query 03:47:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.64<-13376 Statuses=0008 0009 03:47:08 Msec=1500 True Az=85.995 Ze=-20.64 Az status=0008 Ze status=0009 03:47:09 Check angles 03:47:09 SkyScan query 03:47:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.55<-14770 Statuses=0008 0009 03:47:09 Msec=2250 True Az=85.995 Ze=-41.55 Az status=0008 Ze status=0009 03:47:09 Check angles 03:47:09 SkyScan query 03:47:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:47:10 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:47:10 Message to Master queued w/err=0: serial=208378 error=0 03:47:15 Received message from Master: op=Filter serial=208379 03:47:15 Color wheel filter change from 0 to 0 03:47:15 FLIGetFilterPos err=0 currentPosition=0 03:47:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:15 Filter is already there-color wheel unchanged 03:47:15 Received message from Master: op=Shutter serial=208380 03:47:15 Shutter LASER close 03:47:15 Received message from Camera: op=State serial=208382 03:47:15 GetSingleValue result=40 Value=cccccccc 03:47:15 SkyScan query 03:47:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:47:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:16 Parameters OK 03:47:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:16 Set A/D data flow result=40 03:47:16 Set A/D channel type result=40 03:47:16 Set A/D encoding result=40 03:47:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:16 Set channel filter=0.000000e+000 result=40 03:47:16 Config A/D Result=40 03:47:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:16 Get A/D filter: -9.255963e+061 result=40 03:47:16 Get A/D value=-858993460 result=40 03:47:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:16 Parameters OK 03:47:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:16 Set A/D data flow result=40 03:47:16 Set A/D channel type result=40 03:47:16 Set A/D encoding result=40 03:47:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:16 Set channel filter=0.000000e+000 result=40 03:47:16 Config A/D Result=40 03:47:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:16 Get A/D filter: -9.255963e+061 result=40 03:47:16 Get A/D value=-858993460 result=40 03:47:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:16 Aux= 03:47:16 Message to Camera, serial 208382 queued 03:47:53 Received message from Master: op=PointingHead serial=208395 03:47:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:47:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:47:53 Point started: ret=0 03:47:53 point_skyscan result=0 03:47:54 Check angles 03:47:54 SkyScan query 03:47:54 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.12<-17408 Statuses=0009 0009 03:47:54 Msec=0 True Az=108.915 Ze=-81.12 Az status=0009 Ze status=0009 03:47:54 Check angles 03:47:54 SkyScan query 03:47:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 03:47:55 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 03:47:55 Check angles 03:47:55 SkyScan query 03:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 03:47:56 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 03:47:56 Check angles 03:47:56 SkyScan query 03:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 03:47:56 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 03:47:57 Check angles 03:47:57 SkyScan query 03:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.39<-23026 Statuses=0008 0009 03:47:57 Msec=3000 True Az=112.995 Ze=-165.39 Az status=0008 Ze status=0009 03:47:57 Check angles 03:47:57 SkyScan query 03:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:47:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:47:58 Message to Master queued w/err=0: serial=208395 error=0 03:48:03 Received message from Master: op=Filter serial=208396 03:48:03 Color wheel filter change from 0 to 0 03:48:03 FLIGetFilterPos err=0 currentPosition=0 03:48:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:03 Filter is already there-color wheel unchanged 03:48:03 Received message from Master: op=Shutter serial=208397 03:48:03 Shutter LASER open 03:48:03 Received message from Camera: op=State serial=208399 03:48:03 GetSingleValue result=40 Value=cccccccc 03:48:03 SkyScan query 03:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:48:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:04 Parameters OK 03:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:04 Set A/D data flow result=40 03:48:04 Set A/D channel type result=40 03:48:04 Set A/D encoding result=40 03:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:04 Set channel filter=0.000000e+000 result=40 03:48:04 Config A/D Result=40 03:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:04 Get A/D filter: -9.255963e+061 result=40 03:48:04 Get A/D value=-858993460 result=40 03:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:04 Parameters OK 03:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:04 Set A/D data flow result=40 03:48:04 Set A/D channel type result=40 03:48:04 Set A/D encoding result=40 03:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:04 Set channel filter=0.000000e+000 result=40 03:48:04 Config A/D Result=40 03:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:04 Get A/D filter: -9.255963e+061 result=40 03:48:04 Get A/D value=-858993460 result=40 03:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:04 Aux= 03:48:04 Message to Camera, serial 208399 queued 03:48:12 Received message from Master: op=Shutter serial=208409 03:48:12 Shutter LASER close 03:48:13 Received message from Master: op=PointingHead serial=208413 03:48:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:48:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:48:13 Point started: ret=0 03:48:13 point_skyscan result=0 03:48:14 Check angles 03:48:14 SkyScan query 03:48:15 SkyScan query done: ret=0 az=89.835<-5989 ze=157.23<-1518 Statuses=0009 0009 03:48:15 Msec=0 True Az=89.835 Ze=157.23 Az status=0009 Ze status=0009 03:48:15 Check angles 03:48:15 SkyScan query 03:48:15 SkyScan query done: ret=0 az=72.48<-4832 ze=136.275<-2915 Statuses=0009 0009 03:48:15 Msec=750 True Az=72.48 Ze=136.275 Az status=0009 Ze status=0009 03:48:15 Check angles 03:48:15 SkyScan query 03:48:16 SkyScan query done: ret=0 az=54.825<-3655 ze=114.87<-4342 Statuses=0009 0009 03:48:16 Msec=1500 True Az=54.825 Ze=114.87 Az status=0009 Ze status=0009 03:48:16 Check angles 03:48:16 SkyScan query 03:48:17 SkyScan query done: ret=0 az=41.01<-2734 ze=93.93<-5738 Statuses=0009 0009 03:48:17 Msec=2250 True Az=41.01 Ze=93.93 Az status=0009 Ze status=0009 03:48:17 Check angles 03:48:17 SkyScan query 03:48:18 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 03:48:18 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 03:48:18 Check angles 03:48:18 SkyScan query 03:48:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 03:48:18 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 03:48:18 Check angles 03:48:18 SkyScan query 03:48:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:48:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:48:19 Message to Master queued w/err=0: serial=208413 error=0 03:48:24 Received message from Master: op=Filter serial=208414 03:48:24 Color wheel filter change from 0 to 0 03:48:24 FLIGetFilterPos err=0 currentPosition=0 03:48:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:24 Filter is already there-color wheel unchanged 03:48:24 Received message from Master: op=Shutter serial=208415 03:48:24 Shutter LASER close 03:48:24 Received message from Camera: op=State serial=208417 03:48:24 GetSingleValue result=40 Value=cccccccc 03:48:24 SkyScan query 03:48:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:48:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:25 Parameters OK 03:48:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:25 Set A/D data flow result=40 03:48:25 Set A/D channel type result=40 03:48:25 Set A/D encoding result=40 03:48:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:25 Set channel filter=0.000000e+000 result=40 03:48:25 Config A/D Result=40 03:48:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:25 Get A/D filter: -9.255963e+061 result=40 03:48:25 Get A/D value=-858993460 result=40 03:48:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:25 Parameters OK 03:48:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:25 Set A/D data flow result=40 03:48:25 Set A/D channel type result=40 03:48:25 Set A/D encoding result=40 03:48:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:25 Set channel filter=0.000000e+000 result=40 03:48:25 Config A/D Result=40 03:48:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:25 Get A/D filter: -9.255963e+061 result=40 03:48:25 Get A/D value=-858993460 result=40 03:48:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:25 Aux= 03:48:25 Message to Camera, serial 208417 queued 03:49:02 Received message from Master: op=PointingHead serial=208430 03:49:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:49:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:49:02 Point started: ret=0 03:49:02 point_skyscan result=0 03:49:03 Check angles 03:49:03 SkyScan query 03:49:04 SkyScan query done: ret=0 az=40.995<-2733 ze=21.735<-10551 Statuses=0008 0009 03:49:04 Msec=0 True Az=40.995 Ze=21.735 Az status=0008 Ze status=0009 03:49:04 Check angles 03:49:04 SkyScan query 03:49:04 SkyScan query done: ret=0 az=40.98<-2732 ze=0.78<-11948 Statuses=0008 0009 03:49:04 Msec=750 True Az=40.98 Ze=0.78 Az status=0008 Ze status=0009 03:49:05 Check angles 03:49:05 SkyScan query 03:49:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.22<-13348 Statuses=0008 0009 03:49:05 Msec=1500 True Az=40.995 Ze=-20.22 Az status=0008 Ze status=0009 03:49:05 Check angles 03:49:05 SkyScan query 03:49:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 03:49:06 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 03:49:06 Check angles 03:49:06 SkyScan query 03:49:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:49:07 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:49:07 Message to Master queued w/err=0: serial=208430 error=0 03:49:12 Received message from Master: op=Filter serial=208431 03:49:12 Color wheel filter change from 0 to 0 03:49:12 FLIGetFilterPos err=0 currentPosition=0 03:49:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:12 Filter is already there-color wheel unchanged 03:49:12 Received message from Master: op=Shutter serial=208432 03:49:12 Shutter LASER close 03:49:12 Received message from Camera: op=State serial=208434 03:49:12 GetSingleValue result=40 Value=cccccccc 03:49:12 SkyScan query 03:49:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:49:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:12 Parameters OK 03:49:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:12 Set A/D data flow result=40 03:49:12 Set A/D channel type result=40 03:49:12 Set A/D encoding result=40 03:49:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:12 Set channel filter=0.000000e+000 result=40 03:49:12 Config A/D Result=40 03:49:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:12 Get A/D filter: -9.255963e+061 result=40 03:49:12 Get A/D value=-858993460 result=40 03:49:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:12 Parameters OK 03:49:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:12 Set A/D data flow result=40 03:49:12 Set A/D channel type result=40 03:49:12 Set A/D encoding result=40 03:49:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:12 Set channel filter=0.000000e+000 result=40 03:49:12 Config A/D Result=40 03:49:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:12 Get A/D filter: -9.255963e+061 result=40 03:49:12 Get A/D value=-858993460 result=40 03:49:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:12 Aux= 03:49:12 Message to Camera, serial 208434 queued 03:49:49 Received message from Master: op=PointingHead serial=208447 03:49:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:49:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:49:50 Point started: ret=0 03:49:50 point_skyscan result=0 03:49:50 Check angles 03:49:50 SkyScan query 03:49:51 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.76<-16584 Statuses=0009 0009 03:49:51 Msec=0 True Az=64.395 Ze=-68.76 Az status=0009 Ze status=0009 03:49:51 Check angles 03:49:51 SkyScan query 03:49:52 SkyScan query done: ret=0 az=82.365<-5491 ze=-90.165<-18011 Statuses=0009 0009 03:49:52 Msec=750 True Az=82.365 Ze=-90.165 Az status=0009 Ze status=0009 03:49:52 Check angles 03:49:52 SkyScan query 03:49:52 SkyScan query done: ret=0 az=99.855<-6657 ze=-111.135<-19409 Statuses=0009 0009 03:49:52 Msec=1500 True Az=99.855 Ze=-111.135 Az status=0009 Ze status=0009 03:49:53 Check angles 03:49:53 SkyScan query 03:49:53 SkyScan query done: ret=0 az=117.21<-7814 ze=-132.045<-20803 Statuses=0009 0009 03:49:53 Msec=2250 True Az=117.21 Ze=-132.045 Az status=0009 Ze status=0009 03:49:53 Check angles 03:49:53 SkyScan query 03:49:54 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.57<-21438 Statuses=0009 0008 03:49:54 Msec=3000 True Az=131.055 Ze=-141.57 Az status=0009 Ze status=0008 03:49:54 Check angles 03:49:54 SkyScan query 03:49:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:49:55 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:49:55 Message to Master queued w/err=0: serial=208447 error=0 03:50:00 Received message from Master: op=Filter serial=208448 03:50:00 Color wheel filter change from 0 to 0 03:50:00 FLIGetFilterPos err=0 currentPosition=0 03:50:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:00 Filter is already there-color wheel unchanged 03:50:00 Received message from Master: op=Shutter serial=208449 03:50:00 Shutter LASER close 03:50:00 Received message from Camera: op=State serial=208451 03:50:00 GetSingleValue result=40 Value=cccccccc 03:50:00 SkyScan query 03:50:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:50:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:01 Parameters OK 03:50:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:01 Set A/D data flow result=40 03:50:01 Set A/D channel type result=40 03:50:01 Set A/D encoding result=40 03:50:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:01 Set channel filter=0.000000e+000 result=40 03:50:01 Config A/D Result=40 03:50:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:01 Get A/D filter: -9.255963e+061 result=40 03:50:01 Get A/D value=-858993460 result=40 03:50:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:01 Parameters OK 03:50:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:01 Set A/D data flow result=40 03:50:01 Set A/D channel type result=40 03:50:01 Set A/D encoding result=40 03:50:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:01 Set channel filter=0.000000e+000 result=40 03:50:01 Config A/D Result=40 03:50:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:01 Get A/D filter: -9.255963e+061 result=40 03:50:01 Get A/D value=-858993460 result=40 03:50:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:01 Aux= 03:50:01 Message to Camera, serial 208451 queued 03:50:37 Received message from Master: op=PointingHead serial=208464 03:50:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:50:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:50:38 Point started: ret=0 03:50:38 point_skyscan result=0 03:50:38 Check angles 03:50:38 SkyScan query 03:50:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 03:50:39 Msec=0 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 03:50:39 Check angles 03:50:39 SkyScan query 03:50:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:50:40 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:50:40 Message to Master queued w/err=0: serial=208464 error=0 03:50:45 Received message from Master: op=Filter serial=208465 03:50:45 Color wheel filter change from 0 to 0 03:50:45 FLIGetFilterPos err=0 currentPosition=0 03:50:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:45 Filter is already there-color wheel unchanged 03:50:45 Received message from Master: op=Shutter serial=208466 03:50:45 Shutter LASER open 03:50:45 Received message from Camera: op=State serial=208468 03:50:45 GetSingleValue result=40 Value=cccccccc 03:50:45 SkyScan query 03:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:50:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:46 Parameters OK 03:50:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:46 Set A/D data flow result=40 03:50:46 Set A/D channel type result=40 03:50:46 Set A/D encoding result=40 03:50:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:46 Set channel filter=0.000000e+000 result=40 03:50:46 Config A/D Result=40 03:50:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:46 Get A/D filter: -9.255963e+061 result=40 03:50:46 Get A/D value=-858993460 result=40 03:50:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:46 Parameters OK 03:50:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:46 Set A/D data flow result=40 03:50:46 Set A/D channel type result=40 03:50:46 Set A/D encoding result=40 03:50:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:46 Set channel filter=0.000000e+000 result=40 03:50:46 Config A/D Result=40 03:50:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:46 Get A/D filter: -9.255963e+061 result=40 03:50:46 Get A/D value=-858993460 result=40 03:50:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:46 Aux= 03:50:46 Message to Camera, serial 208468 queued 03:50:54 Received message from Master: op=Shutter serial=208478 03:50:54 Shutter LASER close 03:50:55 Received message from Master: op=PointingHead serial=208482 03:50:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:50:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:50:55 Point started: ret=0 03:50:55 point_skyscan result=0 03:50:56 Check angles 03:50:56 SkyScan query 03:50:56 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.445<-21563 Statuses=0009 0009 03:50:56 Msec=0 True Az=135.885 Ze=-143.445 Az status=0009 Ze status=0009 03:50:57 Check angles 03:50:57 SkyScan query 03:50:57 SkyScan query done: ret=0 az=153.78<-10252 ze=-122.01<-20134 Statuses=0009 0009 03:50:57 Msec=750 True Az=153.78 Ze=-122.01 Az status=0009 Ze status=0009 03:50:57 Check angles 03:50:57 SkyScan query 03:50:58 SkyScan query done: ret=0 az=171.615<-11441 ze=-100.545<-18703 Statuses=0009 0009 03:50:58 Msec=1500 True Az=171.615 Ze=-100.545 Az status=0009 Ze status=0009 03:50:58 Check angles 03:50:58 SkyScan query 03:50:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.695<-17313 Statuses=0008 0009 03:50:59 Msec=2250 True Az=176.01 Ze=-79.695 Az status=0008 Ze status=0009 03:50:59 Check angles 03:50:59 SkyScan query 03:50:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.71<-15914 Statuses=0008 0009 03:50:59 Msec=3000 True Az=176.01 Ze=-58.71 Az status=0008 Ze status=0009 03:51:00 Check angles 03:51:00 SkyScan query 03:51:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:51:00 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:51:00 Message to Master queued w/err=0: serial=208482 error=0 03:51:05 Received message from Master: op=Filter serial=208483 03:51:05 Color wheel filter change from 0 to 0 03:51:05 FLIGetFilterPos err=0 currentPosition=0 03:51:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:05 Filter is already there-color wheel unchanged 03:51:05 Received message from Master: op=Shutter serial=208484 03:51:05 Shutter LASER close 03:51:06 Received message from Camera: op=State serial=208486 03:51:06 GetSingleValue result=40 Value=cccccccc 03:51:06 SkyScan query 03:51:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:51:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:06 Parameters OK 03:51:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:06 Set A/D data flow result=40 03:51:06 Set A/D channel type result=40 03:51:06 Set A/D encoding result=40 03:51:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:06 Set channel filter=0.000000e+000 result=40 03:51:06 Config A/D Result=40 03:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:06 Get A/D filter: -9.255963e+061 result=40 03:51:06 Get A/D value=-858993460 result=40 03:51:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:06 Parameters OK 03:51:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:06 Set A/D data flow result=40 03:51:06 Set A/D channel type result=40 03:51:06 Set A/D encoding result=40 03:51:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:06 Set channel filter=0.000000e+000 result=40 03:51:06 Config A/D Result=40 03:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:06 Get A/D filter: -9.255963e+061 result=40 03:51:06 Get A/D value=-858993460 result=40 03:51:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:06 Aux= 03:51:06 Message to Camera, serial 208486 queued 03:51:42 Received message from Master: op=PointingHead serial=208498 03:51:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:51:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:51:42 Point started: ret=0 03:51:42 point_skyscan result=0 03:51:43 Check angles 03:51:43 SkyScan query 03:51:44 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.765<-13451 Statuses=0009 0009 03:51:44 Msec=0 True Az=152.955 Ze=-21.765 Az status=0009 Ze status=0009 03:51:44 Check angles 03:51:44 SkyScan query 03:51:44 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.795<-12053 Statuses=0009 0009 03:51:44 Msec=750 True Az=135.45 Ze=-0.795 Az status=0009 Ze status=0009 03:51:45 Check angles 03:51:45 SkyScan query 03:51:45 SkyScan query done: ret=0 az=118.035<-7869 ze=20.145<-10657 Statuses=0009 0009 03:51:45 Msec=1500 True Az=118.035 Ze=20.145 Az status=0009 Ze status=0009 03:51:45 Check angles 03:51:45 SkyScan query 03:51:46 SkyScan query done: ret=0 az=100.665<-6711 ze=41.13<-9258 Statuses=0009 0009 03:51:46 Msec=2250 True Az=100.665 Ze=41.13 Az status=0009 Ze status=0009 03:51:46 Check angles 03:51:46 SkyScan query 03:51:47 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 03:51:47 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 03:51:47 Check angles 03:51:47 SkyScan query 03:51:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:51:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:51:47 Message to Master queued w/err=0: serial=208498 error=0 03:51:52 Received message from Master: op=Filter serial=208499 03:51:52 Color wheel filter change from 0 to 0 03:51:52 FLIGetFilterPos err=0 currentPosition=0 03:51:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:52 Filter is already there-color wheel unchanged 03:51:53 Received message from Master: op=Shutter serial=208500 03:51:53 Shutter LASER close 03:51:53 Received message from Camera: op=State serial=208502 03:51:53 GetSingleValue result=40 Value=cccccccc 03:51:53 SkyScan query 03:51:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:51:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:53 Parameters OK 03:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:53 Set A/D data flow result=40 03:51:53 Set A/D channel type result=40 03:51:53 Set A/D encoding result=40 03:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:53 Set channel filter=0.000000e+000 result=40 03:51:53 Config A/D Result=40 03:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:53 Get A/D filter: -9.255963e+061 result=40 03:51:53 Get A/D value=-858993460 result=40 03:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:53 Parameters OK 03:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:53 Set A/D data flow result=40 03:51:53 Set A/D channel type result=40 03:51:53 Set A/D encoding result=40 03:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:53 Set channel filter=0.000000e+000 result=40 03:51:53 Config A/D Result=40 03:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:53 Get A/D filter: -9.255963e+061 result=40 03:51:53 Get A/D value=-858993460 result=40 03:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:53 Aux= 03:51:53 Message to Camera, serial 208502 queued 03:52:29 Received message from Master: op=PointingHead serial=208514 03:52:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:52:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:52:30 Point started: ret=0 03:52:30 point_skyscan result=0 03:52:30 Check angles 03:52:30 SkyScan query 03:52:31 SkyScan query done: ret=0 az=85.995<-5733 ze=21.12<-10592 Statuses=0008 0009 03:52:31 Msec=0 True Az=85.995 Ze=21.12 Az status=0008 Ze status=0009 03:52:31 Check angles 03:52:31 SkyScan query 03:52:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.255<-12017 Statuses=0008 0009 03:52:32 Msec=750 True Az=85.995 Ze=-0.255 Az status=0008 Ze status=0009 03:52:32 Check angles 03:52:32 SkyScan query 03:52:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.195<-13413 Statuses=0008 0009 03:52:32 Msec=1500 True Az=85.995 Ze=-21.195 Az status=0008 Ze status=0009 03:52:33 Check angles 03:52:33 SkyScan query 03:52:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.165<-14811 Statuses=0008 0009 03:52:33 Msec=2250 True Az=85.995 Ze=-42.165 Az status=0008 Ze status=0009 03:52:33 Check angles 03:52:33 SkyScan query 03:52:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 03:52:34 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 03:52:34 Message to Master queued w/err=0: serial=208514 error=0 03:52:39 Received message from Master: op=Filter serial=208515 03:52:39 Color wheel filter change from 0 to 0 03:52:39 FLIGetFilterPos err=0 currentPosition=0 03:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:39 Filter is already there-color wheel unchanged 03:52:39 Received message from Master: op=Shutter serial=208516 03:52:39 Shutter LASER close 03:52:39 Received message from Camera: op=State serial=208518 03:52:39 GetSingleValue result=40 Value=cccccccc 03:52:39 SkyScan query 03:52:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:52:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:40 Parameters OK 03:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:40 Set A/D data flow result=40 03:52:40 Set A/D channel type result=40 03:52:40 Set A/D encoding result=40 03:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:40 Set channel filter=0.000000e+000 result=40 03:52:40 Config A/D Result=40 03:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:40 Get A/D filter: -9.255963e+061 result=40 03:52:40 Get A/D value=-858993460 result=40 03:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:40 Parameters OK 03:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:40 Set A/D data flow result=40 03:52:40 Set A/D channel type result=40 03:52:40 Set A/D encoding result=40 03:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:40 Set channel filter=0.000000e+000 result=40 03:52:40 Config A/D Result=40 03:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:40 Get A/D filter: -9.255963e+061 result=40 03:52:40 Get A/D value=-858993460 result=40 03:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:40 Aux= 03:52:40 Message to Camera, serial 208518 queued 03:53:17 Received message from Master: op=PointingHead serial=208531 03:53:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:53:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:53:17 Point started: ret=0 03:53:17 point_skyscan result=0 03:53:18 Check angles 03:53:18 SkyScan query 03:53:18 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.21<-17414 Statuses=0009 0009 03:53:18 Msec=0 True Az=108.915 Ze=-81.21 Az status=0009 Ze status=0009 03:53:18 Check angles 03:53:18 SkyScan query 03:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 03:53:19 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 03:53:19 Check angles 03:53:19 SkyScan query 03:53:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 03:53:20 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 03:53:20 Check angles 03:53:20 SkyScan query 03:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 03:53:21 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 03:53:21 Check angles 03:53:21 SkyScan query 03:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 03:53:21 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 03:53:21 Check angles 03:53:21 SkyScan query 03:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 03:53:22 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 03:53:22 Message to Master queued w/err=0: serial=208531 error=0 03:53:27 Received message from Master: op=Filter serial=208532 03:53:27 Color wheel filter change from 0 to 0 03:53:27 FLIGetFilterPos err=0 currentPosition=0 03:53:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:27 Filter is already there-color wheel unchanged 03:53:27 Received message from Master: op=Shutter serial=208533 03:53:27 Shutter LASER open 03:53:27 Received message from Camera: op=State serial=208535 03:53:27 GetSingleValue result=40 Value=cccccccc 03:53:27 SkyScan query 03:53:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:53:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:28 Parameters OK 03:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:28 Set A/D data flow result=40 03:53:28 Set A/D channel type result=40 03:53:28 Set A/D encoding result=40 03:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:28 Set channel filter=0.000000e+000 result=40 03:53:28 Config A/D Result=40 03:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:28 Get A/D filter: -9.255963e+061 result=40 03:53:28 Get A/D value=-858993460 result=40 03:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:28 Parameters OK 03:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:28 Set A/D data flow result=40 03:53:28 Set A/D channel type result=40 03:53:28 Set A/D encoding result=40 03:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:28 Set channel filter=0.000000e+000 result=40 03:53:28 Config A/D Result=40 03:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:28 Get A/D filter: -9.255963e+061 result=40 03:53:28 Get A/D value=-858993460 result=40 03:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:28 Aux= 03:53:28 Message to Camera, serial 208535 queued 03:53:36 Received message from Master: op=Shutter serial=208545 03:53:36 Shutter LASER close 03:53:37 Received message from Master: op=PointingHead serial=208549 03:53:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:53:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:53:37 Point started: ret=0 03:53:37 point_skyscan result=0 03:53:38 Check angles 03:53:38 SkyScan query 03:53:38 SkyScan query done: ret=0 az=90.225<-6015 ze=157.515<-1499 Statuses=0009 0009 03:53:38 Msec=0 True Az=90.225 Ze=157.515 Az status=0009 Ze status=0009 03:53:39 Check angles 03:53:39 SkyScan query 03:53:39 SkyScan query done: ret=0 az=72.75<-4850 ze=136.53<-2898 Statuses=0009 0009 03:53:39 Msec=750 True Az=72.75 Ze=136.53 Az status=0009 Ze status=0009 03:53:39 Check angles 03:53:39 SkyScan query 03:53:40 SkyScan query done: ret=0 az=55.35<-3690 ze=115.635<-4291 Statuses=0009 0009 03:53:40 Msec=1500 True Az=55.35 Ze=115.635 Az status=0009 Ze status=0009 03:53:40 Check angles 03:53:40 SkyScan query 03:53:41 SkyScan query done: ret=0 az=41.01<-2734 ze=94.65<-5690 Statuses=0009 0009 03:53:41 Msec=2250 True Az=41.01 Ze=94.65 Az status=0009 Ze status=0009 03:53:41 Check angles 03:53:41 SkyScan query 03:53:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.725<-7085 Statuses=0008 0009 03:53:41 Msec=3000 True Az=40.995 Ze=73.725 Az status=0008 Ze status=0009 03:53:42 Check angles 03:53:42 SkyScan query 03:53:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 03:53:42 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 03:53:42 Check angles 03:53:42 SkyScan query 03:53:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:53:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:53:43 Message to Master queued w/err=0: serial=208549 error=0 03:53:48 Received message from Master: op=Filter serial=208550 03:53:48 Color wheel filter change from 0 to 0 03:53:48 FLIGetFilterPos err=0 currentPosition=0 03:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:48 Filter is already there-color wheel unchanged 03:53:48 Received message from Master: op=Shutter serial=208551 03:53:48 Shutter LASER close 03:53:48 Received message from Camera: op=State serial=208553 03:53:48 GetSingleValue result=40 Value=cccccccc 03:53:48 SkyScan query 03:53:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:53:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:49 Parameters OK 03:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:49 Set A/D data flow result=40 03:53:49 Set A/D channel type result=40 03:53:49 Set A/D encoding result=40 03:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:49 Set channel filter=0.000000e+000 result=40 03:53:49 Config A/D Result=40 03:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:49 Get A/D filter: -9.255963e+061 result=40 03:53:49 Get A/D value=-858993460 result=40 03:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:49 Parameters OK 03:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:49 Set A/D data flow result=40 03:53:49 Set A/D channel type result=40 03:53:49 Set A/D encoding result=40 03:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:49 Set channel filter=0.000000e+000 result=40 03:53:49 Config A/D Result=40 03:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:49 Get A/D filter: -9.255963e+061 result=40 03:53:49 Get A/D value=-858993460 result=40 03:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:49 Aux= 03:53:49 Message to Camera, serial 208553 queued 03:54:26 Received message from Master: op=PointingHead serial=208566 03:54:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:54:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:54:26 Point started: ret=0 03:54:26 point_skyscan result=0 03:54:27 Check angles 03:54:27 SkyScan query 03:54:28 SkyScan query done: ret=0 az=40.995<-2733 ze=21.735<-10551 Statuses=0008 0009 03:54:28 Msec=0 True Az=40.995 Ze=21.735 Az status=0008 Ze status=0009 03:54:28 Check angles 03:54:28 SkyScan query 03:54:28 SkyScan query done: ret=0 az=40.995<-2733 ze=0.75<-11950 Statuses=0008 0009 03:54:28 Msec=750 True Az=40.995 Ze=0.75 Az status=0008 Ze status=0009 03:54:28 Check angles 03:54:28 SkyScan query 03:54:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.67<-13378 Statuses=0008 0009 03:54:29 Msec=1500 True Az=40.995 Ze=-20.67 Az status=0008 Ze status=0009 03:54:29 Check angles 03:54:29 SkyScan query 03:54:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 03:54:30 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 03:54:30 Check angles 03:54:30 SkyScan query 03:54:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 03:54:31 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 03:54:31 Message to Master queued w/err=0: serial=208566 error=0 03:54:36 Received message from Master: op=Filter serial=208567 03:54:36 Color wheel filter change from 0 to 0 03:54:36 FLIGetFilterPos err=0 currentPosition=0 03:54:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:36 Filter is already there-color wheel unchanged 03:54:36 Received message from Master: op=Shutter serial=208568 03:54:36 Shutter LASER close 03:54:36 Received message from Camera: op=State serial=208570 03:54:36 GetSingleValue result=40 Value=cccccccc 03:54:36 SkyScan query 03:54:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:54:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:36 Parameters OK 03:54:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:36 Set A/D data flow result=40 03:54:36 Set A/D channel type result=40 03:54:36 Set A/D encoding result=40 03:54:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:36 Set channel filter=0.000000e+000 result=40 03:54:36 Config A/D Result=40 03:54:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:36 Get A/D filter: -9.255963e+061 result=40 03:54:36 Get A/D value=-858993460 result=40 03:54:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:36 Parameters OK 03:54:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:36 Set A/D data flow result=40 03:54:36 Set A/D channel type result=40 03:54:36 Set A/D encoding result=40 03:54:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:36 Set channel filter=0.000000e+000 result=40 03:54:36 Config A/D Result=40 03:54:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:36 Get A/D filter: -9.255963e+061 result=40 03:54:36 Get A/D value=-858993460 result=40 03:54:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:36 Aux= 03:54:36 Message to Camera, serial 208570 queued 03:55:13 Received message from Master: op=PointingHead serial=208583 03:55:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:55:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:55:14 Point started: ret=0 03:55:14 point_skyscan result=0 03:55:14 Check angles 03:55:14 SkyScan query 03:55:15 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.355<-16557 Statuses=0009 0009 03:55:15 Msec=0 True Az=64.005 Ze=-68.355 Az status=0009 Ze status=0009 03:55:15 Check angles 03:55:15 SkyScan query 03:55:16 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.34<-17956 Statuses=0009 0009 03:55:16 Msec=750 True Az=81.54 Ze=-89.34 Az status=0009 Ze status=0009 03:55:16 Check angles 03:55:16 SkyScan query 03:55:16 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.265<-19351 Statuses=0009 0009 03:55:16 Msec=1500 True Az=99.12 Ze=-110.265 Az status=0009 Ze status=0009 03:55:17 Check angles 03:55:17 SkyScan query 03:55:17 SkyScan query done: ret=0 az=116.835<-7789 ze=-131.655<-20777 Statuses=0009 0009 03:55:17 Msec=2250 True Az=116.835 Ze=-131.655 Az status=0009 Ze status=0009 03:55:17 Check angles 03:55:17 SkyScan query 03:55:18 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.57<-21438 Statuses=0009 0008 03:55:18 Msec=3000 True Az=131.07 Ze=-141.57 Az status=0009 Ze status=0008 03:55:18 Check angles 03:55:18 SkyScan query 03:55:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 03:55:19 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 03:55:19 Message to Master queued w/err=0: serial=208583 error=0 03:55:24 Received message from Master: op=Filter serial=208584 03:55:24 Color wheel filter change from 0 to 0 03:55:24 FLIGetFilterPos err=0 currentPosition=0 03:55:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:24 Filter is already there-color wheel unchanged 03:55:24 Received message from Master: op=Shutter serial=208585 03:55:24 Shutter LASER close 03:55:24 Received message from Camera: op=State serial=208587 03:55:24 GetSingleValue result=40 Value=cccccccc 03:55:24 SkyScan query 03:55:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:55:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:24 Parameters OK 03:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:24 Set A/D data flow result=40 03:55:24 Set A/D channel type result=40 03:55:24 Set A/D encoding result=40 03:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:24 Set channel filter=0.000000e+000 result=40 03:55:24 Config A/D Result=40 03:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:24 Get A/D filter: -9.255963e+061 result=40 03:55:24 Get A/D value=-858993460 result=40 03:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:24 Parameters OK 03:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:24 Set A/D data flow result=40 03:55:24 Set A/D channel type result=40 [UTC 2018-12-17 03:55:24] 03:55:24 Set A/D encoding result=40 03:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:24 Set channel filter=0.000000e+000 result=40 03:55:24 Config A/D Result=40 03:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:24 Get A/D filter: -9.255963e+061 result=40 03:55:24 Get A/D value=-858993460 result=40 03:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:24 Aux= 03:55:24 Message to Camera, serial 208587 queued [UTC 2018-12-17 03:55:52] 03:56:01 Received message from Master: op=PointingHead serial=208600 03:56:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:56:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:56:02 Point started: ret=0 03:56:02 point_skyscan result=0 03:56:02 Check angles 03:56:02 SkyScan query 03:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0009 0009 03:56:03 Msec=0 True Az=112.995 Ze=-171.165 Az status=0009 Ze status=0009 03:56:03 Check angles 03:56:03 SkyScan query 03:56:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:56:04 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:56:04 Message to Master queued w/err=0: serial=208600 error=0 03:56:09 Received message from Master: op=Filter serial=208601 03:56:09 Color wheel filter change from 0 to 0 03:56:09 FLIGetFilterPos err=0 currentPosition=0 03:56:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:09 Filter is already there-color wheel unchanged 03:56:09 Received message from Master: op=Shutter serial=208602 03:56:09 Shutter LASER open 03:56:09 Received message from Camera: op=State serial=208604 03:56:09 GetSingleValue result=40 Value=cccccccc 03:56:09 SkyScan query 03:56:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:56:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:10 Parameters OK 03:56:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:10 Set A/D data flow result=40 03:56:10 Set A/D channel type result=40 03:56:10 Set A/D encoding result=40 03:56:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:10 Set channel filter=0.000000e+000 result=40 03:56:10 Config A/D Result=40 03:56:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:10 Get A/D filter: -9.255963e+061 result=40 03:56:10 Get A/D value=-858993460 result=40 03:56:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:10 Parameters OK 03:56:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:10 Set A/D data flow result=40 03:56:10 Set A/D channel type result=40 03:56:10 Set A/D encoding result=40 03:56:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:10 Set channel filter=0.000000e+000 result=40 03:56:10 Config A/D Result=40 03:56:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:10 Get A/D filter: -9.255963e+061 result=40 03:56:10 Get A/D value=-858993460 result=40 03:56:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:10 Aux= 03:56:10 Message to Camera, serial 208604 queued 03:56:18 Received message from Master: op=Shutter serial=208614 03:56:18 Shutter LASER close 03:56:19 Received message from Master: op=PointingHead serial=208618 03:56:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:56:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:56:19 Point started: ret=0 03:56:19 point_skyscan result=0 03:56:20 Check angles 03:56:20 SkyScan query 03:56:20 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.83<-21522 Statuses=0009 0009 03:56:20 Msec=0 True Az=136.35 Ze=-142.83 Az status=0009 Ze status=0009 03:56:21 Check angles 03:56:21 SkyScan query 03:56:21 SkyScan query done: ret=0 az=153.945<-10263 ze=-121.845<-20123 Statuses=0009 0009 03:56:21 Msec=750 True Az=153.945 Ze=-121.845 Az status=0009 Ze status=0009 03:56:21 Check angles 03:56:21 SkyScan query 03:56:22 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.845<-18723 Statuses=0009 0009 03:56:22 Msec=1500 True Az=171.405 Ze=-100.845 Az status=0009 Ze status=0009 03:56:22 Check angles 03:56:22 SkyScan query 03:56:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.01<-17334 Statuses=0008 0009 03:56:23 Msec=2250 True Az=176.01 Ze=-80.01 Az status=0008 Ze status=0009 03:56:23 Check angles 03:56:23 SkyScan query 03:56:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.98<-15932 Statuses=0008 0009 03:56:23 Msec=3000 True Az=175.995 Ze=-58.98 Az status=0008 Ze status=0009 03:56:24 Check angles 03:56:24 SkyScan query 03:56:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 03:56:24 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 03:56:24 Message to Master queued w/err=0: serial=208618 error=0 03:56:29 Received message from Master: op=Filter serial=208619 03:56:29 Color wheel filter change from 0 to 0 03:56:29 FLIGetFilterPos err=0 currentPosition=0 03:56:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:29 Filter is already there-color wheel unchanged 03:56:29 Received message from Master: op=Shutter serial=208620 03:56:29 Shutter LASER close 03:56:30 Received message from Camera: op=State serial=208622 03:56:30 GetSingleValue result=40 Value=cccccccc 03:56:30 SkyScan query 03:56:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:56:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:30 Parameters OK 03:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:30 Set A/D data flow result=40 03:56:30 Set A/D channel type result=40 03:56:30 Set A/D encoding result=40 03:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:30 Set channel filter=0.000000e+000 result=40 03:56:30 Config A/D Result=40 03:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:30 Get A/D filter: -9.255963e+061 result=40 03:56:30 Get A/D value=-858993460 result=40 03:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:30 Parameters OK 03:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:30 Set A/D data flow result=40 03:56:30 Set A/D channel type result=40 03:56:30 Set A/D encoding result=40 03:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:30 Set channel filter=0.000000e+000 result=40 03:56:30 Config A/D Result=40 03:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:30 Get A/D filter: -9.255963e+061 result=40 03:56:30 Get A/D value=-858993460 result=40 03:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:30 Aux= 03:56:30 Message to Camera, serial 208622 queued 03:57:07 Received message from Master: op=PointingHead serial=208635 03:57:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:57:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:57:07 Point started: ret=0 03:57:07 point_skyscan result=0 03:57:08 Check angles 03:57:08 SkyScan query 03:57:09 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.765<-13451 Statuses=0009 0009 03:57:09 Msec=0 True Az=152.97 Ze=-21.765 Az status=0009 Ze status=0009 03:57:09 Check angles 03:57:09 SkyScan query 03:57:09 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.75<-12050 Statuses=0009 0009 03:57:09 Msec=750 True Az=135.45 Ze=-0.75 Az status=0009 Ze status=0009 03:57:10 Check angles 03:57:10 SkyScan query 03:57:10 SkyScan query done: ret=0 az=118.02<-7868 ze=20.145<-10657 Statuses=0009 0009 03:57:10 Msec=1500 True Az=118.02 Ze=20.145 Az status=0009 Ze status=0009 03:57:10 Check angles 03:57:10 SkyScan query 03:57:11 SkyScan query done: ret=0 az=100.68<-6712 ze=41.175<-9255 Statuses=0009 0009 03:57:11 Msec=2250 True Az=100.68 Ze=41.175 Az status=0009 Ze status=0009 03:57:11 Check angles 03:57:11 SkyScan query 03:57:12 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 03:57:12 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 03:57:12 Check angles 03:57:12 SkyScan query 03:57:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:57:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:57:12 Message to Master queued w/err=0: serial=208635 error=0 03:57:17 Received message from Master: op=Filter serial=208636 03:57:17 Color wheel filter change from 0 to 0 03:57:17 FLIGetFilterPos err=0 currentPosition=0 03:57:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:17 Filter is already there-color wheel unchanged 03:57:18 Received message from Master: op=Shutter serial=208637 03:57:18 Shutter LASER close 03:57:18 Received message from Camera: op=State serial=208639 03:57:18 GetSingleValue result=40 Value=cccccccc 03:57:18 SkyScan query 03:57:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:57:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:18 Parameters OK 03:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:18 Set A/D data flow result=40 03:57:18 Set A/D channel type result=40 03:57:18 Set A/D encoding result=40 03:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:18 Set channel filter=0.000000e+000 result=40 03:57:18 Config A/D Result=40 03:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:18 Get A/D filter: -9.255963e+061 result=40 03:57:18 Get A/D value=-858993460 result=40 03:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:18 Parameters OK 03:57:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:18 Set A/D data flow result=40 03:57:18 Set A/D channel type result=40 03:57:18 Set A/D encoding result=40 03:57:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:18 Set channel filter=0.000000e+000 result=40 03:57:18 Config A/D Result=40 03:57:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:18 Get A/D filter: -9.255963e+061 result=40 03:57:18 Get A/D value=-858993460 result=40 03:57:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:18 Aux= 03:57:18 Message to Camera, serial 208639 queued 03:57:55 Received message from Master: op=PointingHead serial=208652 03:57:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:57:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:57:55 Point started: ret=0 03:57:55 point_skyscan result=0 03:57:56 Check angles 03:57:56 SkyScan query 03:57:57 SkyScan query done: ret=0 az=85.995<-5733 ze=21.66<-10556 Statuses=0008 0009 03:57:57 Msec=0 True Az=85.995 Ze=21.66 Az status=0008 Ze status=0009 03:57:57 Check angles 03:57:57 SkyScan query 03:57:58 SkyScan query done: ret=0 az=85.995<-5733 ze=0.735<-11951 Statuses=0008 0009 03:57:58 Msec=750 True Az=85.995 Ze=0.735 Az status=0008 Ze status=0009 03:57:58 Check angles 03:57:58 SkyScan query 03:57:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.235<-13349 Statuses=0008 0009 03:57:58 Msec=1500 True Az=85.995 Ze=-20.235 Az status=0008 Ze status=0009 03:57:58 Check angles 03:57:58 SkyScan query 03:57:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.19<-14746 Statuses=0008 0009 03:57:59 Msec=2250 True Az=85.995 Ze=-41.19 Az status=0008 Ze status=0009 03:57:59 Check angles 03:57:59 SkyScan query 03:58:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 03:58:00 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 03:58:00 Message to Master queued w/err=0: serial=208652 error=0 03:58:05 Received message from Master: op=Filter serial=208653 03:58:05 Color wheel filter change from 0 to 0 03:58:05 FLIGetFilterPos err=0 currentPosition=0 03:58:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:05 Filter is already there-color wheel unchanged 03:58:05 Received message from Master: op=Shutter serial=208654 03:58:05 Shutter LASER close 03:58:05 Received message from Camera: op=State serial=208656 03:58:05 GetSingleValue result=40 Value=cccccccc 03:58:05 SkyScan query 03:58:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:58:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:06 Parameters OK 03:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:06 Set A/D data flow result=40 03:58:06 Set A/D channel type result=40 03:58:06 Set A/D encoding result=40 03:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:06 Set channel filter=0.000000e+000 result=40 03:58:06 Config A/D Result=40 03:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:06 Get A/D filter: -9.255963e+061 result=40 03:58:06 Get A/D value=-858993460 result=40 03:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:06 Parameters OK 03:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:06 Set A/D data flow result=40 03:58:06 Set A/D channel type result=40 03:58:06 Set A/D encoding result=40 03:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:06 Set channel filter=0.000000e+000 result=40 03:58:06 Config A/D Result=40 03:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:06 Get A/D filter: -9.255963e+061 result=40 03:58:06 Get A/D value=-858993460 result=40 03:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:06 Aux= 03:58:06 Message to Camera, serial 208656 queued 03:58:42 Received message from Master: op=PointingHead serial=208669 03:58:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:58:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:58:43 Point started: ret=0 03:58:43 point_skyscan result=0 03:58:44 Check angles 03:58:44 SkyScan query 03:58:44 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.54<-17436 Statuses=0009 0009 03:58:44 Msec=0 True Az=109.335 Ze=-81.54 Az status=0009 Ze status=0009 03:58:44 Check angles 03:58:44 SkyScan query 03:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 03:58:45 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 03:58:45 Check angles 03:58:45 SkyScan query 03:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 03:58:46 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 03:58:46 Check angles 03:58:46 SkyScan query 03:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 03:58:46 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 03:58:47 Check angles 03:58:47 SkyScan query 03:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 03:58:47 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 03:58:47 Check angles 03:58:47 SkyScan query 03:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:58:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:58:48 Message to Master queued w/err=0: serial=208669 error=0 03:58:53 Received message from Master: op=Filter serial=208670 03:58:53 Color wheel filter change from 0 to 0 03:58:53 FLIGetFilterPos err=0 currentPosition=0 03:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:53 Filter is already there-color wheel unchanged 03:58:53 Received message from Master: op=Shutter serial=208671 03:58:53 Shutter LASER open 03:58:53 Received message from Camera: op=State serial=208673 03:58:53 GetSingleValue result=40 Value=cccccccc 03:58:53 SkyScan query 03:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:54 Parameters OK 03:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:54 Set A/D data flow result=40 03:58:54 Set A/D channel type result=40 03:58:54 Set A/D encoding result=40 03:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:54 Set channel filter=0.000000e+000 result=40 03:58:54 Config A/D Result=40 03:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:54 Get A/D filter: -9.255963e+061 result=40 03:58:54 Get A/D value=-858993460 result=40 03:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:54 Parameters OK 03:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:54 Set A/D data flow result=40 03:58:54 Set A/D channel type result=40 03:58:54 Set A/D encoding result=40 03:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:54 Set channel filter=0.000000e+000 result=40 03:58:54 Config A/D Result=40 03:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:54 Get A/D filter: -9.255963e+061 result=40 03:58:54 Get A/D value=-858993460 result=40 03:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:54 Aux= 03:58:54 Message to Camera, serial 208673 queued 03:59:02 Received message from Master: op=Shutter serial=208683 03:59:02 Shutter LASER close 03:59:03 Received message from Master: op=PointingHead serial=208687 03:59:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:59:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:59:03 Point started: ret=0 03:59:03 point_skyscan result=0 03:59:04 Check angles 03:59:04 SkyScan query 03:59:04 SkyScan query done: ret=0 az=89.88<-5992 ze=157.11<-1526 Statuses=0009 0009 03:59:04 Msec=0 True Az=89.88 Ze=157.11 Az status=0009 Ze status=0009 03:59:05 Check angles 03:59:05 SkyScan query 03:59:05 SkyScan query done: ret=0 az=72.555<-4837 ze=136.53<-2898 Statuses=0009 0009 03:59:05 Msec=750 True Az=72.555 Ze=136.53 Az status=0009 Ze status=0009 03:59:05 Check angles 03:59:05 SkyScan query 03:59:06 SkyScan query done: ret=0 az=55.2<-3680 ze=115.665<-4289 Statuses=0009 0009 03:59:06 Msec=1500 True Az=55.2 Ze=115.665 Az status=0009 Ze status=0009 03:59:06 Check angles 03:59:06 SkyScan query 03:59:07 SkyScan query done: ret=0 az=40.98<-2732 ze=94.65<-5690 Statuses=0009 0009 03:59:07 Msec=2250 True Az=40.98 Ze=94.65 Az status=0009 Ze status=0009 03:59:07 Check angles 03:59:07 SkyScan query 03:59:07 SkyScan query done: ret=0 az=40.98<-2732 ze=73.74<-7084 Statuses=0008 0009 03:59:07 Msec=3000 True Az=40.98 Ze=73.74 Az status=0008 Ze status=0009 03:59:08 Check angles 03:59:08 SkyScan query 03:59:08 SkyScan query done: ret=0 az=40.98<-2732 ze=53.025<-8465 Statuses=0008 0009 03:59:08 Msec=3750 True Az=40.98 Ze=53.025 Az status=0008 Ze status=0009 03:59:08 Check angles 03:59:08 SkyScan query 03:59:09 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 03:59:09 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 03:59:09 Message to Master queued w/err=0: serial=208687 error=0 03:59:14 Received message from Master: op=Filter serial=208688 03:59:14 Color wheel filter change from 0 to 0 03:59:14 FLIGetFilterPos err=0 currentPosition=0 03:59:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:14 Filter is already there-color wheel unchanged 03:59:14 Received message from Master: op=Shutter serial=208689 03:59:14 Shutter LASER close 03:59:14 Received message from Camera: op=State serial=208691 03:59:14 GetSingleValue result=40 Value=cccccccc 03:59:14 SkyScan query 03:59:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:59:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:15 Parameters OK 03:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:15 Set A/D data flow result=40 03:59:15 Set A/D channel type result=40 03:59:15 Set A/D encoding result=40 03:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:15 Set channel filter=0.000000e+000 result=40 03:59:15 Config A/D Result=40 03:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:15 Get A/D filter: -9.255963e+061 result=40 03:59:15 Get A/D value=-858993460 result=40 03:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:15 Parameters OK 03:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:15 Set A/D data flow result=40 03:59:15 Set A/D channel type result=40 03:59:15 Set A/D encoding result=40 03:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:15 Set channel filter=0.000000e+000 result=40 03:59:15 Config A/D Result=40 03:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:15 Get A/D filter: -9.255963e+061 result=40 03:59:15 Get A/D value=-858993460 result=40 03:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:15 Aux= 03:59:15 Message to Camera, serial 208691 queued 03:59:52 Received message from Master: op=PointingHead serial=208704 03:59:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:59:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:59:52 Point started: ret=0 03:59:52 point_skyscan result=0 03:59:53 Check angles 03:59:53 SkyScan query 03:59:53 SkyScan query done: ret=0 az=40.995<-2733 ze=21.555<-10563 Statuses=0008 0009 03:59:53 Msec=0 True Az=40.995 Ze=21.555 Az status=0008 Ze status=0009 03:59:54 Check angles 03:59:54 SkyScan query 03:59:54 SkyScan query done: ret=0 az=40.995<-2733 ze=0.57<-11962 Statuses=0008 0009 03:59:54 Msec=750 True Az=40.995 Ze=0.57 Az status=0008 Ze status=0009 03:59:54 Check angles 03:59:54 SkyScan query 03:59:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.37<-13358 Statuses=0008 0009 03:59:55 Msec=1500 True Az=40.995 Ze=-20.37 Az status=0008 Ze status=0009 03:59:55 Check angles 03:59:55 SkyScan query 03:59:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 03:59:56 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 03:59:56 Check angles 03:59:56 SkyScan query 03:59:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 03:59:56 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 03:59:56 Message to Master queued w/err=0: serial=208704 error=0 04:00:01 Received message from Master: op=Filter serial=208705 04:00:01 Color wheel filter change from 0 to 0 04:00:01 FLIGetFilterPos err=0 currentPosition=0 04:00:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:01 Filter is already there-color wheel unchanged 04:00:02 Received message from Master: op=Shutter serial=208706 04:00:02 Shutter LASER close 04:00:02 Received message from Camera: op=State serial=208708 04:00:02 GetSingleValue result=40 Value=cccccccc 04:00:02 SkyScan query 04:00:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:00:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:02 Parameters OK 04:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:02 Set A/D data flow result=40 04:00:02 Set A/D channel type result=40 04:00:02 Set A/D encoding result=40 04:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:02 Set channel filter=0.000000e+000 result=40 04:00:02 Config A/D Result=40 04:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:02 Get A/D filter: -9.255963e+061 result=40 04:00:02 Get A/D value=-858993460 result=40 04:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:02 Parameters OK 04:00:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:02 Set A/D data flow result=40 04:00:02 Set A/D channel type result=40 04:00:02 Set A/D encoding result=40 04:00:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:02 Set channel filter=0.000000e+000 result=40 04:00:02 Config A/D Result=40 04:00:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:02 Get A/D filter: -9.255963e+061 result=40 04:00:02 Get A/D value=-858993460 result=40 04:00:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:02 Aux= 04:00:02 Message to Camera, serial 208708 queued 04:00:39 Received message from Master: op=PointingHead serial=208721 04:00:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:00:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:00:39 Point started: ret=0 04:00:39 point_skyscan result=0 04:00:40 Check angles 04:00:40 SkyScan query 04:00:41 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.52<-16568 Statuses=0009 0009 04:00:41 Msec=0 True Az=64.23 Ze=-68.52 Az status=0009 Ze status=0009 04:00:41 Check angles 04:00:41 SkyScan query 04:00:41 SkyScan query done: ret=0 az=82.17<-5478 ze=-89.925<-17995 Statuses=0009 0009 04:00:41 Msec=750 True Az=82.17 Ze=-89.925 Az status=0009 Ze status=0009 04:00:42 Check angles 04:00:42 SkyScan query 04:00:42 SkyScan query done: ret=0 az=99.885<-6659 ze=-111.33<-19422 Statuses=0009 0009 04:00:42 Msec=1500 True Az=99.885 Ze=-111.33 Az status=0009 Ze status=0009 04:00:42 Check angles 04:00:42 SkyScan query 04:00:43 SkyScan query done: ret=0 az=117.285<-7819 ze=-132.255<-20817 Statuses=0009 0009 04:00:43 Msec=2250 True Az=117.285 Ze=-132.255 Az status=0009 Ze status=0009 04:00:43 Check angles 04:00:43 SkyScan query 04:00:44 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.555<-21437 Statuses=0009 0008 04:00:44 Msec=3000 True Az=131.085 Ze=-141.555 Az status=0009 Ze status=0008 04:00:44 Check angles 04:00:44 SkyScan query 04:00:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:00:44 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:00:44 Message to Master queued w/err=0: serial=208721 error=0 04:00:49 Received message from Master: op=Filter serial=208722 04:00:49 Color wheel filter change from 0 to 0 04:00:49 FLIGetFilterPos err=0 currentPosition=0 04:00:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:49 Filter is already there-color wheel unchanged 04:00:50 Received message from Master: op=Shutter serial=208723 04:00:50 Shutter LASER close 04:00:50 Received message from Camera: op=State serial=208725 04:00:50 GetSingleValue result=40 Value=cccccccc 04:00:50 SkyScan query 04:00:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:00:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:50 Parameters OK 04:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:50 Set A/D data flow result=40 04:00:50 Set A/D channel type result=40 04:00:50 Set A/D encoding result=40 04:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:50 Set channel filter=0.000000e+000 result=40 04:00:50 Config A/D Result=40 04:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:50 Get A/D filter: -9.255963e+061 result=40 04:00:50 Get A/D value=-858993460 result=40 04:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:50 Parameters OK 04:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:50 Set A/D data flow result=40 04:00:50 Set A/D channel type result=40 04:00:50 Set A/D encoding result=40 04:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:50 Set channel filter=0.000000e+000 result=40 04:00:50 Config A/D Result=40 04:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:50 Get A/D filter: -9.255963e+061 result=40 04:00:50 Get A/D value=-858993460 result=40 04:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:50 Aux= 04:00:50 Message to Camera, serial 208725 queued 04:01:27 Received message from Master: op=PointingHead serial=208738 04:01:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:01:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:01:28 Point started: ret=0 04:01:28 point_skyscan result=0 04:01:28 Check angles 04:01:28 SkyScan query 04:01:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 04:01:29 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 04:01:29 Check angles 04:01:29 SkyScan query 04:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:01:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:01:30 Message to Master queued w/err=0: serial=208738 error=0 04:01:35 Received message from Master: op=Filter serial=208739 04:01:35 Color wheel filter change from 0 to 0 04:01:35 FLIGetFilterPos err=0 currentPosition=0 04:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:35 Filter is already there-color wheel unchanged 04:01:35 Received message from Master: op=Shutter serial=208740 04:01:35 Shutter LASER open 04:01:35 Received message from Camera: op=State serial=208742 04:01:35 GetSingleValue result=40 Value=cccccccc 04:01:35 SkyScan query 04:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:36 Parameters OK 04:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:36 Set A/D data flow result=40 04:01:36 Set A/D channel type result=40 04:01:36 Set A/D encoding result=40 04:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:36 Set channel filter=0.000000e+000 result=40 04:01:36 Config A/D Result=40 04:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:36 Get A/D filter: -9.255963e+061 result=40 04:01:36 Get A/D value=-858993460 result=40 04:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:36 Parameters OK 04:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:36 Set A/D data flow result=40 04:01:36 Set A/D channel type result=40 04:01:36 Set A/D encoding result=40 04:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:36 Set channel filter=0.000000e+000 result=40 04:01:36 Config A/D Result=40 04:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:36 Get A/D filter: -9.255963e+061 result=40 04:01:36 Get A/D value=-858993460 result=40 04:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:36 Aux= 04:01:36 Message to Camera, serial 208742 queued 04:01:44 Received message from Master: op=Shutter serial=208752 04:01:44 Shutter LASER close 04:01:45 Received message from Master: op=PointingHead serial=208756 04:01:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:01:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:01:45 Point started: ret=0 04:01:45 point_skyscan result=0 04:01:46 Check angles 04:01:46 SkyScan query 04:01:46 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.565<-21571 Statuses=0009 0009 04:01:46 Msec=0 True Az=135.72 Ze=-143.565 Az status=0009 Ze status=0009 04:01:46 Check angles 04:01:46 SkyScan query 04:01:47 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.115<-20141 Statuses=0009 0009 04:01:47 Msec=750 True Az=153.54 Ze=-122.115 Az status=0009 Ze status=0009 04:01:47 Check angles 04:01:47 SkyScan query 04:01:48 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.22<-18748 Statuses=0009 0009 04:01:48 Msec=1500 True Az=171.105 Ze=-101.22 Az status=0009 Ze status=0009 04:01:48 Check angles 04:01:48 SkyScan query 04:01:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.28<-17352 Statuses=0008 0009 04:01:49 Msec=2250 True Az=175.995 Ze=-80.28 Az status=0008 Ze status=0009 04:01:49 Check angles 04:01:49 SkyScan query 04:01:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 04:01:49 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 04:01:49 Check angles 04:01:49 SkyScan query 04:01:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:01:50 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:01:50 Message to Master queued w/err=0: serial=208756 error=0 04:01:55 Received message from Master: op=Filter serial=208757 04:01:55 Color wheel filter change from 0 to 0 04:01:55 FLIGetFilterPos err=0 currentPosition=0 04:01:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:55 Filter is already there-color wheel unchanged 04:01:55 Received message from Master: op=Shutter serial=208758 04:01:55 Shutter LASER close 04:01:55 Received message from Camera: op=State serial=208760 04:01:55 GetSingleValue result=40 Value=cccccccc 04:01:55 SkyScan query 04:01:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:56 Parameters OK 04:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:56 Set A/D data flow result=40 04:01:56 Set A/D channel type result=40 04:01:56 Set A/D encoding result=40 04:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:56 Set channel filter=0.000000e+000 result=40 04:01:56 Config A/D Result=40 04:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:56 Get A/D filter: -9.255963e+061 result=40 04:01:56 Get A/D value=-858993460 result=40 04:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:56 Parameters OK 04:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:56 Set A/D data flow result=40 04:01:56 Set A/D channel type result=40 04:01:56 Set A/D encoding result=40 04:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:56 Set channel filter=0.000000e+000 result=40 04:01:56 Config A/D Result=40 04:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:56 Get A/D filter: -9.255963e+061 result=40 04:01:56 Get A/D value=-858993460 result=40 04:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:56 Aux= 04:01:56 Message to Camera, serial 208760 queued 04:02:33 Received message from Master: op=PointingHead serial=208773 04:02:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:02:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:02:33 Point started: ret=0 04:02:33 point_skyscan result=0 04:02:34 Check angles 04:02:34 SkyScan query 04:02:34 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.915<-13461 Statuses=0009 0009 04:02:34 Msec=0 True Az=153.105 Ze=-21.915 Az status=0009 Ze status=0009 04:02:35 Check angles 04:02:35 SkyScan query 04:02:35 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.48<-12032 Statuses=0009 0009 04:02:35 Msec=750 True Az=135.315 Ze=-0.48 Az status=0009 Ze status=0009 04:02:35 Check angles 04:02:35 SkyScan query 04:02:36 SkyScan query done: ret=0 az=117.375<-7825 ze=20.97<-10602 Statuses=0009 0009 04:02:36 Msec=1500 True Az=117.375 Ze=20.97 Az status=0009 Ze status=0009 04:02:36 Check angles 04:02:36 SkyScan query 04:02:37 SkyScan query done: ret=0 az=100.08<-6672 ze=41.865<-9209 Statuses=0009 0009 04:02:37 Msec=2250 True Az=100.08 Ze=41.865 Az status=0009 Ze status=0009 04:02:37 Check angles 04:02:37 SkyScan query 04:02:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 04:02:37 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 04:02:38 Check angles 04:02:38 SkyScan query 04:02:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:02:38 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 04:02:38 Message to Master queued w/err=0: serial=208773 error=0 04:02:43 Received message from Master: op=Filter serial=208774 04:02:43 Color wheel filter change from 0 to 0 04:02:43 FLIGetFilterPos err=0 currentPosition=0 04:02:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:43 Filter is already there-color wheel unchanged 04:02:43 Received message from Master: op=Shutter serial=208775 04:02:43 Shutter LASER close 04:02:43 Received message from Camera: op=State serial=208777 04:02:43 GetSingleValue result=40 Value=cccccccc 04:02:43 SkyScan query 04:02:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:02:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:44 Parameters OK 04:02:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:44 Set A/D data flow result=40 04:02:44 Set A/D channel type result=40 04:02:44 Set A/D encoding result=40 04:02:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:44 Set channel filter=0.000000e+000 result=40 04:02:44 Config A/D Result=40 04:02:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:44 Get A/D filter: -9.255963e+061 result=40 04:02:44 Get A/D value=-858993460 result=40 04:02:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:44 Parameters OK 04:02:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:44 Set A/D data flow result=40 04:02:44 Set A/D channel type result=40 04:02:44 Set A/D encoding result=40 04:02:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:44 Set channel filter=0.000000e+000 result=40 04:02:44 Config A/D Result=40 04:02:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:44 Get A/D filter: -9.255963e+061 result=40 04:02:44 Get A/D value=-858993460 result=40 04:02:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:44 Aux= 04:02:44 Message to Camera, serial 208777 queued 04:03:21 Received message from Master: op=PointingHead serial=208790 04:03:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:03:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:03:21 Point started: ret=0 04:03:21 point_skyscan result=0 04:03:22 Check angles 04:03:22 SkyScan query 04:03:23 SkyScan query done: ret=0 az=85.995<-5733 ze=21.72<-10552 Statuses=0008 0009 04:03:23 Msec=0 True Az=85.995 Ze=21.72 Az status=0008 Ze status=0009 04:03:23 Check angles 04:03:23 SkyScan query 04:03:23 SkyScan query done: ret=0 az=86.01<-5734 ze=0.33<-11978 Statuses=0008 0009 04:03:23 Msec=750 True Az=86.01 Ze=0.33 Az status=0008 Ze status=0009 04:03:24 Check angles 04:03:24 SkyScan query 04:03:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.06<-13404 Statuses=0008 0009 04:03:24 Msec=1500 True Az=85.995 Ze=-21.06 Az status=0008 Ze status=0009 04:03:24 Check angles 04:03:24 SkyScan query 04:03:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-42<-14800 Statuses=0008 0009 04:03:25 Msec=2250 True Az=85.995 Ze=-42 Az status=0008 Ze status=0009 04:03:25 Check angles 04:03:25 SkyScan query 04:03:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:03:26 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:03:26 Message to Master queued w/err=0: serial=208790 error=0 04:03:31 Received message from Master: op=Filter serial=208791 04:03:31 Color wheel filter change from 0 to 0 04:03:31 FLIGetFilterPos err=0 currentPosition=0 04:03:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:31 Filter is already there-color wheel unchanged 04:03:31 Received message from Master: op=Shutter serial=208792 04:03:31 Shutter LASER close 04:03:31 Received message from Camera: op=State serial=208794 04:03:31 GetSingleValue result=40 Value=cccccccc 04:03:31 SkyScan query 04:03:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:03:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:31 Parameters OK 04:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:31 Set A/D data flow result=40 04:03:31 Set A/D channel type result=40 04:03:31 Set A/D encoding result=40 04:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:31 Set channel filter=0.000000e+000 result=40 04:03:31 Config A/D Result=40 04:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:31 Get A/D filter: -9.255963e+061 result=40 04:03:31 Get A/D value=-858993460 result=40 04:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:31 Parameters OK 04:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:31 Set A/D data flow result=40 04:03:31 Set A/D channel type result=40 04:03:31 Set A/D encoding result=40 04:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:31 Set channel filter=0.000000e+000 result=40 04:03:31 Config A/D Result=40 04:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:31 Get A/D filter: -9.255963e+061 result=40 04:03:31 Get A/D value=-858993460 result=40 04:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:31 Aux= 04:03:31 Message to Camera, serial 208794 queued 04:04:08 Received message from Master: op=PointingHead serial=208807 04:04:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:04:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:04:09 Point started: ret=0 04:04:09 point_skyscan result=0 04:04:09 Check angles 04:04:09 SkyScan query 04:04:10 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.39<-17426 Statuses=0009 0009 04:04:10 Msec=0 True Az=109.125 Ze=-81.39 Az status=0009 Ze status=0009 04:04:10 Check angles 04:04:10 SkyScan query 04:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 04:04:11 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 04:04:11 Check angles 04:04:11 SkyScan query 04:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 04:04:11 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 04:04:12 Check angles 04:04:12 SkyScan query 04:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.675<-21645 Statuses=0008 0009 04:04:12 Msec=2250 True Az=112.995 Ze=-144.675 Az status=0008 Ze status=0009 04:04:12 Check angles 04:04:12 SkyScan query 04:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 04:04:13 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 04:04:13 Check angles 04:04:13 SkyScan query 04:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:04:14 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:04:14 Message to Master queued w/err=0: serial=208807 error=0 04:04:19 Received message from Master: op=Filter serial=208808 04:04:19 Color wheel filter change from 0 to 0 04:04:19 FLIGetFilterPos err=0 currentPosition=0 04:04:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:19 Filter is already there-color wheel unchanged 04:04:19 Received message from Master: op=Shutter serial=208809 04:04:19 Shutter LASER open 04:04:19 Received message from Camera: op=State serial=208811 04:04:19 GetSingleValue result=40 Value=cccccccc 04:04:19 SkyScan query 04:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:04:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:20 Parameters OK 04:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:20 Set A/D data flow result=40 04:04:20 Set A/D channel type result=40 04:04:20 Set A/D encoding result=40 04:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:20 Set channel filter=0.000000e+000 result=40 04:04:20 Config A/D Result=40 04:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:20 Get A/D filter: -9.255963e+061 result=40 04:04:20 Get A/D value=-858993460 result=40 04:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:20 Parameters OK 04:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:20 Set A/D data flow result=40 04:04:20 Set A/D channel type result=40 04:04:20 Set A/D encoding result=40 04:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:20 Set channel filter=0.000000e+000 result=40 04:04:20 Config A/D Result=40 04:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:20 Get A/D filter: -9.255963e+061 result=40 04:04:20 Get A/D value=-858993460 result=40 04:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:20 Aux= 04:04:20 Message to Camera, serial 208811 queued 04:04:28 Received message from Master: op=Shutter serial=208821 04:04:28 Shutter LASER close 04:04:29 Received message from Master: op=PointingHead serial=208825 04:04:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:04:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:04:29 Point started: ret=0 04:04:29 point_skyscan result=0 04:04:30 Check angles 04:04:30 SkyScan query 04:04:30 SkyScan query done: ret=0 az=89.505<-5967 ze=156.765<-1549 Statuses=0009 0009 04:04:30 Msec=0 True Az=89.505 Ze=156.765 Az status=0009 Ze status=0009 04:04:30 Check angles 04:04:30 SkyScan query 04:04:31 SkyScan query done: ret=0 az=71.535<-4769 ze=135.33<-2978 Statuses=0009 0009 04:04:31 Msec=750 True Az=71.535 Ze=135.33 Az status=0009 Ze status=0009 04:04:31 Check angles 04:04:31 SkyScan query 04:04:32 SkyScan query done: ret=0 az=54.33<-3622 ze=114.315<-4379 Statuses=0009 0009 04:04:32 Msec=1500 True Az=54.33 Ze=114.315 Az status=0009 Ze status=0009 04:04:32 Check angles 04:04:32 SkyScan query 04:04:32 SkyScan query done: ret=0 az=40.98<-2732 ze=93.435<-5771 Statuses=0009 0009 04:04:32 Msec=2250 True Az=40.98 Ze=93.435 Az status=0009 Ze status=0009 04:04:33 Check angles 04:04:33 SkyScan query 04:04:33 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 04:04:33 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 04:04:33 Check angles 04:04:33 SkyScan query 04:04:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 04:04:34 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 04:04:34 Check angles 04:04:34 SkyScan query 04:04:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:04:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:04:35 Message to Master queued w/err=0: serial=208825 error=0 04:04:40 Received message from Master: op=Filter serial=208826 04:04:40 Color wheel filter change from 0 to 0 04:04:40 FLIGetFilterPos err=0 currentPosition=0 04:04:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:40 Filter is already there-color wheel unchanged 04:04:40 Received message from Master: op=Shutter serial=208827 04:04:40 Shutter LASER close 04:04:40 Received message from Camera: op=State serial=208829 04:04:40 GetSingleValue result=40 Value=cccccccc 04:04:40 SkyScan query 04:04:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:04:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:41 Parameters OK 04:04:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:41 Set A/D data flow result=40 04:04:41 Set A/D channel type result=40 04:04:41 Set A/D encoding result=40 04:04:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:41 Set channel filter=0.000000e+000 result=40 04:04:41 Config A/D Result=40 04:04:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:41 Get A/D filter: -9.255963e+061 result=40 04:04:41 Get A/D value=-858993460 result=40 04:04:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:41 Parameters OK 04:04:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:41 Set A/D data flow result=40 04:04:41 Set A/D channel type result=40 04:04:41 Set A/D encoding result=40 04:04:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:41 Set channel filter=0.000000e+000 result=40 04:04:41 Config A/D Result=40 04:04:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:41 Get A/D filter: -9.255963e+061 result=40 04:04:41 Get A/D value=-858993460 result=40 04:04:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:41 Aux= 04:04:41 Message to Camera, serial 208829 queued 04:05:17 Received message from Master: op=PointingHead serial=208841 04:05:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:05:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:05:17 Point started: ret=0 04:05:17 point_skyscan result=0 04:05:18 Check angles 04:05:18 SkyScan query 04:05:18 SkyScan query done: ret=0 az=40.995<-2733 ze=21.735<-10551 Statuses=0008 0009 04:05:18 Msec=0 True Az=40.995 Ze=21.735 Az status=0008 Ze status=0009 04:05:19 Check angles 04:05:19 SkyScan query 04:05:19 SkyScan query done: ret=0 az=41.01<-2734 ze=0.285<-11981 Statuses=0008 0009 04:05:19 Msec=750 True Az=41.01 Ze=0.285 Az status=0008 Ze status=0009 04:05:19 Check angles 04:05:19 SkyScan query 04:05:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.67<-13378 Statuses=0008 0009 04:05:20 Msec=1500 True Az=40.995 Ze=-20.67 Az status=0008 Ze status=0009 04:05:20 Check angles 04:05:20 SkyScan query 04:05:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 04:05:21 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 04:05:21 Check angles 04:05:21 SkyScan query 04:05:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 04:05:21 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 04:05:21 Message to Master queued w/err=0: serial=208841 error=0 04:05:26 Received message from Master: op=Filter serial=208842 04:05:26 Color wheel filter change from 0 to 0 04:05:26 FLIGetFilterPos err=0 currentPosition=0 04:05:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:26 Filter is already there-color wheel unchanged 04:05:27 Received message from Master: op=Shutter serial=208843 04:05:27 Shutter LASER close [UTC 2018-12-17 04:05:27] 04:05:27 Received message from Camera: op=State serial=208845 04:05:27 GetSingleValue result=40 Value=cccccccc 04:05:27 SkyScan query 04:05:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:05:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:27 Parameters OK 04:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:27 Set A/D data flow result=40 04:05:27 Set A/D channel type result=40 04:05:27 Set A/D encoding result=40 04:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:27 Set channel filter=0.000000e+000 result=40 04:05:27 Config A/D Result=40 04:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:27 Get A/D filter: -9.255963e+061 result=40 04:05:27 Get A/D value=-858993460 result=40 04:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:27 Parameters OK 04:05:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:27 Set A/D data flow result=40 04:05:27 Set A/D channel type result=40 04:05:27 Set A/D encoding result=40 04:05:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:27 Set channel filter=0.000000e+000 result=40 04:05:27 Config A/D Result=40 04:05:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:27 Get A/D filter: -9.255963e+061 result=40 04:05:27 Get A/D value=-858993460 result=40 04:05:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:27 Aux= 04:05:27 Message to Camera, serial 208845 queued 04:06:04 Received message from Master: op=PointingHead serial=208858 04:06:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:06:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:06:04 Point started: ret=0 04:06:04 point_skyscan result=0 04:06:05 Check angles 04:06:05 SkyScan query 04:06:06 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.865<-16591 Statuses=0009 0009 04:06:06 Msec=0 True Az=64.395 Ze=-68.865 Az status=0009 Ze status=0009 04:06:06 Check angles 04:06:06 SkyScan query 04:06:06 SkyScan query done: ret=0 az=82.335<-5489 ze=-90.24<-18016 Statuses=0009 0009 04:06:06 Msec=750 True Az=82.335 Ze=-90.24 Az status=0009 Ze status=0009 04:06:07 Check angles 04:06:07 SkyScan query 04:06:07 SkyScan query done: ret=0 az=100.29<-6686 ze=-111.6<-19440 Statuses=0009 0009 04:06:07 Msec=1500 True Az=100.29 Ze=-111.6 Az status=0009 Ze status=0009 04:06:07 Check angles 04:06:07 SkyScan query 04:06:08 SkyScan query done: ret=0 az=117.675<-7845 ze=-132.54<-20836 Statuses=0009 0009 04:06:08 Msec=2250 True Az=117.675 Ze=-132.54 Az status=0009 Ze status=0009 04:06:08 Check angles 04:06:08 SkyScan query 04:06:09 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 04:06:09 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 04:06:09 Check angles 04:06:09 SkyScan query 04:06:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:06:09 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:06:09 Message to Master queued w/err=0: serial=208858 error=0 04:06:14 Received message from Master: op=Filter serial=208859 04:06:14 Color wheel filter change from 0 to 0 04:06:14 FLIGetFilterPos err=0 currentPosition=0 04:06:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:14 Filter is already there-color wheel unchanged 04:06:15 Received message from Master: op=Shutter serial=208860 04:06:15 Shutter LASER close 04:06:15 Received message from Camera: op=State serial=208862 04:06:15 GetSingleValue result=40 Value=cccccccc 04:06:15 SkyScan query 04:06:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:06:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:15 Parameters OK 04:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:15 Set A/D data flow result=40 04:06:15 Set A/D channel type result=40 04:06:15 Set A/D encoding result=40 04:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:15 Set channel filter=0.000000e+000 result=40 04:06:15 Config A/D Result=40 04:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:15 Get A/D filter: -9.255963e+061 result=40 04:06:15 Get A/D value=-858993460 result=40 04:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:15 Parameters OK 04:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:15 Set A/D data flow result=40 04:06:15 Set A/D channel type result=40 04:06:15 Set A/D encoding result=40 04:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:15 Set channel filter=0.000000e+000 result=40 04:06:15 Config A/D Result=40 04:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:15 Get A/D filter: -9.255963e+061 result=40 04:06:15 Get A/D value=-858993460 result=40 04:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:15 Aux= 04:06:15 Message to Camera, serial 208862 queued 04:06:52 Received message from Master: op=PointingHead serial=208875 04:06:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:06:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:06:52 Point started: ret=0 04:06:52 point_skyscan result=0 04:06:53 Check angles 04:06:53 SkyScan query 04:06:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0009 0009 04:06:54 Msec=0 True Az=112.995 Ze=-171.525 Az status=0009 Ze status=0009 04:06:54 Check angles 04:06:54 SkyScan query 04:06:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:06:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:06:55 Message to Master queued w/err=0: serial=208875 error=0 04:07:00 Received message from Master: op=Filter serial=208876 04:07:00 Color wheel filter change from 0 to 0 04:07:00 FLIGetFilterPos err=0 currentPosition=0 04:07:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:00 Filter is already there-color wheel unchanged 04:07:00 Received message from Master: op=Shutter serial=208877 04:07:00 Shutter LASER open 04:07:00 Received message from Camera: op=State serial=208879 04:07:00 GetSingleValue result=40 Value=cccccccc 04:07:00 SkyScan query 04:07:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 04:07:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:00 Parameters OK 04:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:00 Set A/D data flow result=40 04:07:00 Set A/D channel type result=40 04:07:00 Set A/D encoding result=40 04:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:00 Set channel filter=0.000000e+000 result=40 04:07:00 Config A/D Result=40 04:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:00 Get A/D filter: -9.255963e+061 result=40 04:07:00 Get A/D value=-858993460 result=40 04:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:00 Parameters OK 04:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:00 Set A/D data flow result=40 04:07:00 Set A/D channel type result=40 04:07:00 Set A/D encoding result=40 04:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:00 Set channel filter=0.000000e+000 result=40 04:07:00 Config A/D Result=40 04:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:00 Get A/D filter: -9.255963e+061 result=40 04:07:00 Get A/D value=-858993460 result=40 04:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:00 Aux= 04:07:00 Message to Camera, serial 208879 queued 04:07:08 Received message from Master: op=Shutter serial=208888 04:07:08 Shutter LASER close 04:07:09 Received message from Master: op=PointingHead serial=208892 04:07:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:07:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:07:09 Point started: ret=0 04:07:09 point_skyscan result=0 04:07:10 Check angles 04:07:10 SkyScan query 04:07:10 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.55<-21570 Statuses=0009 0009 04:07:10 Msec=0 True Az=135.72 Ze=-143.55 Az status=0009 Ze status=0009 04:07:10 Check angles 04:07:10 SkyScan query 04:07:11 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.085<-20139 Statuses=0009 0009 04:07:11 Msec=750 True Az=153.585 Ze=-122.085 Az status=0009 Ze status=0009 04:07:11 Check angles 04:07:11 SkyScan query 04:07:12 SkyScan query done: ret=0 az=171.105<-11407 ze=-101.175<-18745 Statuses=0009 0009 04:07:12 Msec=1500 True Az=171.105 Ze=-101.175 Az status=0009 Ze status=0009 04:07:12 Check angles 04:07:12 SkyScan query 04:07:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.265<-17351 Statuses=0008 0009 04:07:12 Msec=2250 True Az=175.995 Ze=-80.265 Az status=0008 Ze status=0009 04:07:13 Check angles 04:07:13 SkyScan query 04:07:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.8<-15920 Statuses=0008 0009 04:07:13 Msec=3000 True Az=175.995 Ze=-58.8 Az status=0008 Ze status=0009 04:07:13 Check angles 04:07:13 SkyScan query 04:07:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:07:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:07:14 Message to Master queued w/err=0: serial=208892 error=0 04:07:19 Received message from Master: op=Filter serial=208893 04:07:19 Color wheel filter change from 0 to 0 04:07:19 FLIGetFilterPos err=0 currentPosition=0 04:07:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:19 Filter is already there-color wheel unchanged 04:07:19 Received message from Master: op=Shutter serial=208894 04:07:19 Shutter LASER close 04:07:19 Received message from Camera: op=State serial=208896 04:07:19 GetSingleValue result=40 Value=cccccccc 04:07:19 SkyScan query 04:07:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:07:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:20 Parameters OK 04:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:20 Set A/D data flow result=40 04:07:20 Set A/D channel type result=40 04:07:20 Set A/D encoding result=40 04:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:20 Set channel filter=0.000000e+000 result=40 04:07:20 Config A/D Result=40 04:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:20 Get A/D filter: -9.255963e+061 result=40 04:07:20 Get A/D value=-858993460 result=40 04:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:20 Parameters OK 04:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:20 Set A/D data flow result=40 04:07:20 Set A/D channel type result=40 04:07:20 Set A/D encoding result=40 04:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:20 Set channel filter=0.000000e+000 result=40 04:07:20 Config A/D Result=40 04:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:20 Get A/D filter: -9.255963e+061 result=40 04:07:20 Get A/D value=-858993460 result=40 04:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:20 Aux= 04:07:20 Message to Camera, serial 208896 queued 04:07:57 Received message from Master: op=PointingHead serial=208909 04:07:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:07:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:07:57 Point started: ret=0 04:07:57 point_skyscan result=0 04:07:58 Check angles 04:07:58 SkyScan query 04:07:58 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.615<-13441 Statuses=0009 0009 04:07:58 Msec=0 True Az=152.775 Ze=-21.615 Az status=0009 Ze status=0009 04:07:59 Check angles 04:07:59 SkyScan query 04:07:59 SkyScan query done: ret=0 az=134.985<-8999 ze=-0.195<-12013 Statuses=0009 0009 04:07:59 Msec=750 True Az=134.985 Ze=-0.195 Az status=0009 Ze status=0009 04:07:59 Check angles 04:07:59 SkyScan query 04:08:00 SkyScan query done: ret=0 az=117.51<-7834 ze=20.79<-10614 Statuses=0009 0009 04:08:00 Msec=1500 True Az=117.51 Ze=20.79 Az status=0009 Ze status=0009 04:08:00 Check angles 04:08:00 SkyScan query 04:08:01 SkyScan query done: ret=0 az=100.125<-6675 ze=41.7<-9220 Statuses=0009 0009 04:08:01 Msec=2250 True Az=100.125 Ze=41.7 Az status=0009 Ze status=0009 04:08:01 Check angles 04:08:01 SkyScan query 04:08:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 04:08:01 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 04:08:02 Check angles 04:08:02 SkyScan query 04:08:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:08:02 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 04:08:02 Message to Master queued w/err=0: serial=208909 error=0 04:08:07 Received message from Master: op=Filter serial=208910 04:08:07 Color wheel filter change from 0 to 0 04:08:07 FLIGetFilterPos err=0 currentPosition=0 04:08:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:07 Filter is already there-color wheel unchanged 04:08:07 Received message from Master: op=Shutter serial=208911 04:08:07 Shutter LASER close 04:08:07 Received message from Camera: op=State serial=208913 04:08:07 GetSingleValue result=40 Value=cccccccc 04:08:07 SkyScan query 04:08:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 04:08:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:08 Parameters OK 04:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:08 Set A/D data flow result=40 04:08:08 Set A/D channel type result=40 04:08:08 Set A/D encoding result=40 04:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:08 Set channel filter=0.000000e+000 result=40 04:08:08 Config A/D Result=40 04:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:08 Get A/D filter: -9.255963e+061 result=40 04:08:08 Get A/D value=-858993460 result=40 04:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:08 Parameters OK 04:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:08 Set A/D data flow result=40 04:08:08 Set A/D channel type result=40 04:08:08 Set A/D encoding result=40 04:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:08 Set channel filter=0.000000e+000 result=40 04:08:08 Config A/D Result=40 04:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:08 Get A/D filter: -9.255963e+061 result=40 04:08:08 Get A/D value=-858993460 result=40 04:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:08 Aux= 04:08:08 Message to Camera, serial 208913 queued 04:08:45 Received message from Master: op=PointingHead serial=208926 04:08:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:08:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:08:45 Point started: ret=0 04:08:45 point_skyscan result=0 04:08:46 Check angles 04:08:46 SkyScan query 04:08:47 SkyScan query done: ret=0 az=85.995<-5733 ze=21.645<-10557 Statuses=0008 0009 04:08:47 Msec=0 True Az=85.995 Ze=21.645 Az status=0008 Ze status=0009 04:08:47 Check angles 04:08:47 SkyScan query 04:08:47 SkyScan query done: ret=0 az=86.01<-5734 ze=0.255<-11983 Statuses=0008 0009 04:08:47 Msec=750 True Az=86.01 Ze=0.255 Az status=0008 Ze status=0009 04:08:48 Check angles 04:08:48 SkyScan query 04:08:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.685<-13379 Statuses=0008 0009 04:08:48 Msec=1500 True Az=85.995 Ze=-20.685 Az status=0008 Ze status=0009 04:08:48 Check angles 04:08:48 SkyScan query 04:08:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.61<-14774 Statuses=0008 0009 04:08:49 Msec=2250 True Az=85.995 Ze=-41.61 Az status=0008 Ze status=0009 04:08:49 Check angles 04:08:49 SkyScan query 04:08:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:08:50 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:08:50 Message to Master queued w/err=0: serial=208926 error=0 04:08:55 Received message from Master: op=Filter serial=208927 04:08:55 Color wheel filter change from 0 to 0 04:08:55 FLIGetFilterPos err=0 currentPosition=0 04:08:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:55 Filter is already there-color wheel unchanged 04:08:55 Received message from Master: op=Shutter serial=208928 04:08:55 Shutter LASER close 04:08:55 Received message from Camera: op=State serial=208930 04:08:55 GetSingleValue result=40 Value=cccccccc 04:08:55 SkyScan query 04:08:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:08:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:55 Parameters OK 04:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:55 Set A/D data flow result=40 04:08:55 Set A/D channel type result=40 04:08:55 Set A/D encoding result=40 04:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:55 Set channel filter=0.000000e+000 result=40 04:08:55 Config A/D Result=40 04:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:55 Get A/D filter: -9.255963e+061 result=40 04:08:55 Get A/D value=-858993460 result=40 04:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:55 Parameters OK 04:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:55 Set A/D data flow result=40 04:08:55 Set A/D channel type result=40 04:08:55 Set A/D encoding result=40 04:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:55 Set channel filter=0.000000e+000 result=40 04:08:55 Config A/D Result=40 04:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:55 Get A/D filter: -9.255963e+061 result=40 04:08:55 Get A/D value=-858993460 result=40 04:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:55 Aux= 04:08:55 Message to Camera, serial 208930 queued 04:09:32 Received message from Master: op=PointingHead serial=208943 04:09:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:09:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:09:33 Point started: ret=0 04:09:33 point_skyscan result=0 04:09:33 Check angles 04:09:33 SkyScan query 04:09:34 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.24<-17416 Statuses=0009 0009 04:09:34 Msec=0 True Az=108.915 Ze=-81.24 Az status=0009 Ze status=0009 04:09:34 Check angles 04:09:34 SkyScan query 04:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 04:09:35 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 04:09:35 Check angles 04:09:35 SkyScan query 04:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 04:09:36 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 04:09:36 Check angles 04:09:36 SkyScan query 04:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.12<-21608 Statuses=0008 0009 04:09:36 Msec=2250 True Az=112.995 Ze=-144.12 Az status=0008 Ze status=0009 04:09:36 Check angles 04:09:36 SkyScan query 04:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 04:09:37 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 04:09:37 Check angles 04:09:37 SkyScan query 04:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:09:38 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:09:38 Message to Master queued w/err=0: serial=208943 error=0 04:09:43 Received message from Master: op=Filter serial=208944 04:09:43 Color wheel filter change from 0 to 0 04:09:43 FLIGetFilterPos err=0 currentPosition=0 04:09:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:43 Filter is already there-color wheel unchanged 04:09:43 Received message from Master: op=Shutter serial=208945 04:09:43 Shutter LASER open 04:09:43 Received message from Camera: op=State serial=208947 04:09:43 GetSingleValue result=40 Value=cccccccc 04:09:43 SkyScan query 04:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:09:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:44 Parameters OK 04:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:44 Set A/D data flow result=40 04:09:44 Set A/D channel type result=40 04:09:44 Set A/D encoding result=40 04:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:44 Set channel filter=0.000000e+000 result=40 04:09:44 Config A/D Result=40 04:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:44 Get A/D filter: -9.255963e+061 result=40 04:09:44 Get A/D value=-858993460 result=40 04:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:44 Parameters OK 04:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:44 Set A/D data flow result=40 04:09:44 Set A/D channel type result=40 04:09:44 Set A/D encoding result=40 04:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:44 Set channel filter=0.000000e+000 result=40 04:09:44 Config A/D Result=40 04:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:44 Get A/D filter: -9.255963e+061 result=40 04:09:44 Get A/D value=-858993460 result=40 04:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:44 Aux= 04:09:44 Message to Camera, serial 208947 queued 04:09:52 Received message from Master: op=Shutter serial=208957 04:09:52 Shutter LASER close 04:09:53 Received message from Master: op=PointingHead serial=208961 04:09:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:09:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:09:53 Point started: ret=0 04:09:53 point_skyscan result=0 04:09:54 Check angles 04:09:54 SkyScan query 04:09:54 SkyScan query done: ret=0 az=89.82<-5988 ze=157.05<-1530 Statuses=0009 0009 04:09:54 Msec=0 True Az=89.82 Ze=157.05 Az status=0009 Ze status=0009 04:09:54 Check angles 04:09:54 SkyScan query 04:09:55 SkyScan query done: ret=0 az=71.94<-4796 ze=135.66<-2956 Statuses=0009 0009 04:09:55 Msec=750 True Az=71.94 Ze=135.66 Az status=0009 Ze status=0009 04:09:55 Check angles 04:09:55 SkyScan query 04:09:56 SkyScan query done: ret=0 az=54.57<-3638 ze=114.645<-4357 Statuses=0009 0009 04:09:56 Msec=1500 True Az=54.57 Ze=114.645 Az status=0009 Ze status=0009 04:09:56 Check angles 04:09:56 SkyScan query 04:09:56 SkyScan query done: ret=0 az=41.025<-2735 ze=93.75<-5750 Statuses=0009 0009 04:09:56 Msec=2250 True Az=41.025 Ze=93.75 Az status=0009 Ze status=0009 04:09:57 Check angles 04:09:57 SkyScan query 04:09:57 SkyScan query done: ret=0 az=40.98<-2732 ze=72.345<-7177 Statuses=0008 0009 04:09:57 Msec=3000 True Az=40.98 Ze=72.345 Az status=0008 Ze status=0009 04:09:57 Check angles 04:09:57 SkyScan query 04:09:58 SkyScan query done: ret=0 az=40.98<-2732 ze=52.2<-8520 Statuses=0008 0009 04:09:58 Msec=3750 True Az=40.98 Ze=52.2 Az status=0008 Ze status=0009 04:09:58 Check angles 04:09:58 SkyScan query 04:09:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:09:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:09:59 Message to Master queued w/err=0: serial=208961 error=0 04:10:04 Received message from Master: op=Filter serial=208962 04:10:04 Color wheel filter change from 0 to 0 04:10:04 FLIGetFilterPos err=0 currentPosition=0 04:10:04 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:04 Filter is already there-color wheel unchanged 04:10:04 Received message from Master: op=Shutter serial=208963 04:10:04 Shutter LASER close 04:10:04 Received message from Camera: op=State serial=208965 04:10:04 GetSingleValue result=40 Value=cccccccc 04:10:04 SkyScan query 04:10:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:10:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:05 Parameters OK 04:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:05 Set A/D data flow result=40 04:10:05 Set A/D channel type result=40 04:10:05 Set A/D encoding result=40 04:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:05 Set channel filter=0.000000e+000 result=40 04:10:05 Config A/D Result=40 04:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:05 Get A/D filter: -9.255963e+061 result=40 04:10:05 Get A/D value=-858993460 result=40 04:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:05 Parameters OK 04:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:05 Set A/D data flow result=40 04:10:05 Set A/D channel type result=40 04:10:05 Set A/D encoding result=40 04:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:05 Set channel filter=0.000000e+000 result=40 04:10:05 Config A/D Result=40 04:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:05 Get A/D filter: -9.255963e+061 result=40 04:10:05 Get A/D value=-858993460 result=40 04:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:05 Aux= 04:10:05 Message to Camera, serial 208965 queued 04:10:42 Received message from Master: op=PointingHead serial=208978 04:10:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:10:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:10:42 Point started: ret=0 04:10:42 point_skyscan result=0 04:10:43 Check angles 04:10:43 SkyScan query 04:10:43 SkyScan query done: ret=0 az=40.995<-2733 ze=21.6<-10560 Statuses=0008 0009 04:10:43 Msec=0 True Az=40.995 Ze=21.6 Az status=0008 Ze status=0009 04:10:44 Check angles 04:10:44 SkyScan query 04:10:44 SkyScan query done: ret=0 az=41.01<-2734 ze=0.165<-11989 Statuses=0008 0009 04:10:44 Msec=750 True Az=41.01 Ze=0.165 Az status=0008 Ze status=0009 04:10:44 Check angles 04:10:44 SkyScan query 04:10:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.805<-13387 Statuses=0008 0009 04:10:45 Msec=1500 True Az=40.995 Ze=-20.805 Az status=0008 Ze status=0009 04:10:45 Check angles 04:10:45 SkyScan query 04:10:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 04:10:46 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 04:10:46 Check angles 04:10:46 SkyScan query 04:10:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:10:46 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:10:46 Message to Master queued w/err=0: serial=208978 error=0 04:10:51 Received message from Master: op=Filter serial=208979 04:10:51 Color wheel filter change from 0 to 0 04:10:51 FLIGetFilterPos err=0 currentPosition=0 04:10:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:51 Filter is already there-color wheel unchanged 04:10:52 Received message from Master: op=Shutter serial=208980 04:10:52 Shutter LASER close 04:10:52 Received message from Camera: op=State serial=208982 04:10:52 GetSingleValue result=40 Value=cccccccc 04:10:52 SkyScan query 04:10:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:10:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:52 Parameters OK 04:10:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:52 Set A/D data flow result=40 04:10:52 Set A/D channel type result=40 04:10:52 Set A/D encoding result=40 04:10:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:52 Set channel filter=0.000000e+000 result=40 04:10:52 Config A/D Result=40 04:10:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:52 Get A/D filter: -9.255963e+061 result=40 04:10:52 Get A/D value=-858993460 result=40 04:10:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:52 Parameters OK 04:10:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:52 Set A/D data flow result=40 04:10:52 Set A/D channel type result=40 04:10:52 Set A/D encoding result=40 04:10:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:52 Set channel filter=0.000000e+000 result=40 04:10:52 Config A/D Result=40 04:10:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:52 Get A/D filter: -9.255963e+061 result=40 04:10:52 Get A/D value=-858993460 result=40 04:10:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:52 Aux= 04:10:52 Message to Camera, serial 208982 queued 04:11:29 Received message from Master: op=PointingHead serial=208995 04:11:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:11:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:11:29 Point started: ret=0 04:11:29 point_skyscan result=0 04:11:30 Check angles 04:11:30 SkyScan query 04:11:31 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.04<-16536 Statuses=0009 0009 04:11:31 Msec=0 True Az=63.81 Ze=-68.04 Az status=0009 Ze status=0009 04:11:31 Check angles 04:11:31 SkyScan query 04:11:31 SkyScan query done: ret=0 az=81.165<-5411 ze=-89.01<-17934 Statuses=0009 0009 04:11:31 Msec=750 True Az=81.165 Ze=-89.01 Az status=0009 Ze status=0009 04:11:32 Check angles 04:11:32 SkyScan query 04:11:32 SkyScan query done: ret=0 az=98.76<-6584 ze=-109.92<-19328 Statuses=0009 0009 04:11:32 Msec=1500 True Az=98.76 Ze=-109.92 Az status=0009 Ze status=0009 04:11:32 Check angles 04:11:32 SkyScan query 04:11:33 SkyScan query done: ret=0 az=116.58<-7772 ze=-131.325<-20755 Statuses=0009 0009 04:11:33 Msec=2250 True Az=116.58 Ze=-131.325 Az status=0009 Ze status=0009 04:11:33 Check angles 04:11:33 SkyScan query 04:11:34 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 04:11:34 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 04:11:34 Check angles 04:11:34 SkyScan query 04:11:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:11:34 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:11:34 Message to Master queued w/err=0: serial=208995 error=0 04:11:39 Received message from Master: op=Filter serial=208996 04:11:39 Color wheel filter change from 0 to 0 04:11:39 FLIGetFilterPos err=0 currentPosition=0 04:11:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:39 Filter is already there-color wheel unchanged 04:11:40 Received message from Master: op=Shutter serial=208997 04:11:40 Shutter LASER close 04:11:40 Received message from Camera: op=State serial=208999 04:11:40 GetSingleValue result=40 Value=cccccccc 04:11:40 SkyScan query 04:11:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:11:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:40 Parameters OK 04:11:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:40 Set A/D data flow result=40 04:11:40 Set A/D channel type result=40 04:11:40 Set A/D encoding result=40 04:11:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:40 Set channel filter=0.000000e+000 result=40 04:11:40 Config A/D Result=40 04:11:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:40 Get A/D filter: -9.255963e+061 result=40 04:11:40 Get A/D value=-858993460 result=40 04:11:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:40 Parameters OK 04:11:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:40 Set A/D data flow result=40 04:11:40 Set A/D channel type result=40 04:11:40 Set A/D encoding result=40 04:11:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:40 Set channel filter=0.000000e+000 result=40 04:11:40 Config A/D Result=40 04:11:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:40 Get A/D filter: -9.255963e+061 result=40 04:11:40 Get A/D value=-858993460 result=40 04:11:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:40 Aux= 04:11:40 Message to Camera, serial 208999 queued 04:12:17 Received message from Master: op=PointingHead serial=209012 04:12:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:12:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:12:17 Point started: ret=0 04:12:17 point_skyscan result=0 04:12:18 Check angles 04:12:18 SkyScan query 04:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0009 0009 04:12:19 Msec=0 True Az=112.995 Ze=-171.18 Az status=0009 Ze status=0009 04:12:19 Check angles 04:12:19 SkyScan query 04:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:12:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:12:20 Message to Master queued w/err=0: serial=209012 error=0 04:12:25 Received message from Master: op=Filter serial=209013 04:12:25 Color wheel filter change from 0 to 0 04:12:25 FLIGetFilterPos err=0 currentPosition=0 04:12:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:25 Filter is already there-color wheel unchanged 04:12:25 Received message from Master: op=Shutter serial=209014 04:12:25 Shutter LASER open 04:12:25 Received message from Camera: op=State serial=209016 04:12:25 GetSingleValue result=40 Value=cccccccc 04:12:25 SkyScan query 04:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:12:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:25 Parameters OK 04:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:25 Set A/D data flow result=40 04:12:25 Set A/D channel type result=40 04:12:25 Set A/D encoding result=40 04:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:25 Set channel filter=0.000000e+000 result=40 04:12:25 Config A/D Result=40 04:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:25 Get A/D filter: -9.255963e+061 result=40 04:12:25 Get A/D value=-858993460 result=40 04:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:25 Parameters OK 04:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:25 Set A/D data flow result=40 04:12:25 Set A/D channel type result=40 04:12:25 Set A/D encoding result=40 04:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:25 Set channel filter=0.000000e+000 result=40 04:12:25 Config A/D Result=40 04:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:25 Get A/D filter: -9.255963e+061 result=40 04:12:25 Get A/D value=-858993460 result=40 04:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:25 Aux= 04:12:25 Message to Camera, serial 209016 queued 04:12:34 Received message from Master: op=Shutter serial=209026 04:12:34 Shutter LASER close 04:12:34 Received message from Master: op=PointingHead serial=209030 04:12:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:12:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:12:35 Point started: ret=0 04:12:35 point_skyscan result=0 04:12:36 Check angles 04:12:36 SkyScan query 04:12:36 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.235<-21549 Statuses=0009 0009 04:12:36 Msec=0 True Az=136.005 Ze=-143.235 Az status=0009 Ze status=0009 04:12:36 Check angles 04:12:36 SkyScan query 04:12:37 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.22<-20148 Statuses=0009 0009 04:12:37 Msec=750 True Az=153.495 Ze=-122.22 Az status=0009 Ze status=0009 04:12:37 Check angles 04:12:37 SkyScan query 04:12:38 SkyScan query done: ret=0 az=171.03<-11402 ze=-101.325<-18755 Statuses=0009 0009 04:12:38 Msec=1500 True Az=171.03 Ze=-101.325 Az status=0009 Ze status=0009 04:12:38 Check angles 04:12:38 SkyScan query 04:12:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.935<-17329 Statuses=0008 0009 04:12:38 Msec=2250 True Az=176.01 Ze=-79.935 Az status=0008 Ze status=0009 04:12:39 Check angles 04:12:39 SkyScan query 04:12:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.935<-15929 Statuses=0008 0009 04:12:39 Msec=3000 True Az=175.995 Ze=-58.935 Az status=0008 Ze status=0009 04:12:39 Check angles 04:12:39 SkyScan query 04:12:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:12:40 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:12:40 Message to Master queued w/err=0: serial=209030 error=0 04:12:45 Received message from Master: op=Filter serial=209031 04:12:45 Color wheel filter change from 0 to 0 04:12:45 FLIGetFilterPos err=0 currentPosition=0 04:12:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:45 Filter is already there-color wheel unchanged 04:12:45 Received message from Master: op=Shutter serial=209032 04:12:45 Shutter LASER close 04:12:45 Received message from Camera: op=State serial=209034 04:12:45 GetSingleValue result=40 Value=cccccccc 04:12:45 SkyScan query 04:12:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:12:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:46 Parameters OK 04:12:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:46 Set A/D data flow result=40 04:12:46 Set A/D channel type result=40 04:12:46 Set A/D encoding result=40 04:12:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:46 Set channel filter=0.000000e+000 result=40 04:12:46 Config A/D Result=40 04:12:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:46 Get A/D filter: -9.255963e+061 result=40 04:12:46 Get A/D value=-858993460 result=40 04:12:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:46 Parameters OK 04:12:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:46 Set A/D data flow result=40 04:12:46 Set A/D channel type result=40 04:12:46 Set A/D encoding result=40 04:12:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:46 Set channel filter=0.000000e+000 result=40 04:12:46 Config A/D Result=40 04:12:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:46 Get A/D filter: -9.255963e+061 result=40 04:12:46 Get A/D value=-858993460 result=40 04:12:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:46 Aux= 04:12:46 Message to Camera, serial 209034 queued 04:13:23 Received message from Master: op=PointingHead serial=209047 04:13:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:13:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:13:23 Point started: ret=0 04:13:23 point_skyscan result=0 04:13:24 Check angles 04:13:24 SkyScan query 04:13:24 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.87<-13458 Statuses=0009 0009 04:13:24 Msec=0 True Az=153.09 Ze=-21.87 Az status=0009 Ze status=0009 04:13:24 Check angles 04:13:24 SkyScan query 04:13:25 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.87<-12058 Statuses=0009 0009 04:13:25 Msec=750 True Az=135.675 Ze=-0.87 Az status=0009 Ze status=0009 04:13:25 Check angles 04:13:25 SkyScan query 04:13:26 SkyScan query done: ret=0 az=118.08<-7872 ze=20.055<-10663 Statuses=0009 0009 04:13:26 Msec=1500 True Az=118.08 Ze=20.055 Az status=0009 Ze status=0009 04:13:26 Check angles 04:13:26 SkyScan query 04:13:27 SkyScan query done: ret=0 az=100.74<-6716 ze=41.04<-9264 Statuses=0009 0009 04:13:27 Msec=2250 True Az=100.74 Ze=41.04 Az status=0009 Ze status=0009 04:13:27 Check angles 04:13:27 SkyScan query 04:13:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 04:13:27 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 04:13:27 Check angles 04:13:27 SkyScan query 04:13:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:13:28 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 04:13:28 Message to Master queued w/err=0: serial=209047 error=0 04:13:33 Received message from Master: op=Filter serial=209048 04:13:33 Color wheel filter change from 0 to 0 04:13:33 FLIGetFilterPos err=0 currentPosition=0 04:13:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:33 Filter is already there-color wheel unchanged 04:13:33 Received message from Master: op=Shutter serial=209049 04:13:33 Shutter LASER close 04:13:33 Received message from Camera: op=State serial=209051 04:13:33 GetSingleValue result=40 Value=cccccccc 04:13:33 SkyScan query 04:13:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:13:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:34 Parameters OK 04:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:34 Set A/D data flow result=40 04:13:34 Set A/D channel type result=40 04:13:34 Set A/D encoding result=40 04:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:34 Set channel filter=0.000000e+000 result=40 04:13:34 Config A/D Result=40 04:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:34 Get A/D filter: -9.255963e+061 result=40 04:13:34 Get A/D value=-858993460 result=40 04:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:34 Parameters OK 04:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:34 Set A/D data flow result=40 04:13:34 Set A/D channel type result=40 04:13:34 Set A/D encoding result=40 04:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:34 Set channel filter=0.000000e+000 result=40 04:13:34 Config A/D Result=40 04:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:34 Get A/D filter: -9.255963e+061 result=40 04:13:34 Get A/D value=-858993460 result=40 04:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:34 Aux= 04:13:34 Message to Camera, serial 209051 queued 04:14:11 Received message from Master: op=PointingHead serial=209064 04:14:11 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:14:11 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:14:11 Point started: ret=0 04:14:11 point_skyscan result=0 04:14:12 Check angles 04:14:12 SkyScan query 04:14:13 SkyScan query done: ret=0 az=85.995<-5733 ze=21.57<-10562 Statuses=0008 0009 04:14:13 Msec=0 True Az=85.995 Ze=21.57 Az status=0008 Ze status=0009 04:14:13 Check angles 04:14:13 SkyScan query 04:14:13 SkyScan query done: ret=0 az=85.995<-5733 ze=0.645<-11957 Statuses=0008 0009 04:14:13 Msec=750 True Az=85.995 Ze=0.645 Az status=0008 Ze status=0009 04:14:14 Check angles 04:14:14 SkyScan query 04:14:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.325<-13355 Statuses=0008 0009 04:14:14 Msec=1500 True Az=85.995 Ze=-20.325 Az status=0008 Ze status=0009 04:14:14 Check angles 04:14:14 SkyScan query 04:14:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.22<-14748 Statuses=0008 0009 04:14:15 Msec=2250 True Az=85.995 Ze=-41.22 Az status=0008 Ze status=0009 04:14:15 Check angles 04:14:15 SkyScan query 04:14:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:14:16 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:14:16 Message to Master queued w/err=0: serial=209064 error=0 04:14:21 Received message from Master: op=Filter serial=209065 04:14:21 Color wheel filter change from 0 to 0 04:14:21 FLIGetFilterPos err=0 currentPosition=0 04:14:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:21 Filter is already there-color wheel unchanged 04:14:21 Received message from Master: op=Shutter serial=209066 04:14:21 Shutter LASER close 04:14:21 Received message from Camera: op=State serial=209068 04:14:21 GetSingleValue result=40 Value=cccccccc 04:14:21 SkyScan query 04:14:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:14:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:21 Parameters OK 04:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:21 Set A/D data flow result=40 04:14:21 Set A/D channel type result=40 04:14:21 Set A/D encoding result=40 04:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:21 Set channel filter=0.000000e+000 result=40 04:14:21 Config A/D Result=40 04:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:21 Get A/D filter: -9.255963e+061 result=40 04:14:21 Get A/D value=-858993460 result=40 04:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:21 Parameters OK 04:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:21 Set A/D data flow result=40 04:14:21 Set A/D channel type result=40 04:14:21 Set A/D encoding result=40 04:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:21 Set channel filter=0.000000e+000 result=40 04:14:21 Config A/D Result=40 04:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:21 Get A/D filter: -9.255963e+061 result=40 04:14:21 Get A/D value=-858993460 result=40 04:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:21 Aux= 04:14:21 Message to Camera, serial 209068 queued 04:14:58 Received message from Master: op=PointingHead serial=209081 04:14:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:14:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:14:59 Point started: ret=0 04:14:59 point_skyscan result=0 04:14:59 Check angles 04:14:59 SkyScan query 04:15:00 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.36<-17424 Statuses=0009 0009 04:15:00 Msec=0 True Az=109.125 Ze=-81.36 Az status=0009 Ze status=0009 04:15:00 Check angles 04:15:00 SkyScan query 04:15:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 04:15:01 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 04:15:01 Check angles 04:15:01 SkyScan query 04:15:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.3<-20220 Statuses=0008 0009 04:15:01 Msec=1500 True Az=112.995 Ze=-123.3 Az status=0008 Ze status=0009 04:15:02 Check angles 04:15:02 SkyScan query 04:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.24<-21616 Statuses=0008 0009 04:15:02 Msec=2250 True Az=112.995 Ze=-144.24 Az status=0008 Ze status=0009 04:15:02 Check angles 04:15:02 SkyScan query 04:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.585<-23039 Statuses=0008 0009 04:15:03 Msec=3000 True Az=112.995 Ze=-165.585 Az status=0008 Ze status=0009 04:15:03 Check angles 04:15:03 SkyScan query 04:15:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:15:04 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:15:04 Message to Master queued w/err=0: serial=209081 error=0 04:15:09 Received message from Master: op=Filter serial=209082 04:15:09 Color wheel filter change from 0 to 0 04:15:09 FLIGetFilterPos err=0 currentPosition=0 04:15:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:09 Filter is already there-color wheel unchanged 04:15:09 Received message from Master: op=Shutter serial=209083 04:15:09 Shutter LASER open 04:15:09 Received message from Camera: op=State serial=209085 04:15:09 GetSingleValue result=40 Value=cccccccc 04:15:09 SkyScan query 04:15:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:15:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:10 Parameters OK 04:15:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:10 Set A/D data flow result=40 04:15:10 Set A/D channel type result=40 04:15:10 Set A/D encoding result=40 04:15:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:10 Set channel filter=0.000000e+000 result=40 04:15:10 Config A/D Result=40 04:15:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:10 Get A/D filter: -9.255963e+061 result=40 04:15:10 Get A/D value=-858993460 result=40 04:15:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:10 Parameters OK 04:15:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:10 Set A/D data flow result=40 04:15:10 Set A/D channel type result=40 04:15:10 Set A/D encoding result=40 04:15:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:10 Set channel filter=0.000000e+000 result=40 04:15:10 Config A/D Result=40 04:15:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:10 Get A/D filter: -9.255963e+061 result=40 04:15:10 Get A/D value=-858993460 result=40 04:15:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:10 Aux= 04:15:10 Message to Camera, serial 209085 queued 04:15:18 Received message from Master: op=Shutter serial=209095 04:15:18 Shutter LASER close 04:15:18 Received message from Master: op=PointingHead serial=209099 04:15:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:15:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-17 04:15:19] 04:15:19 Point started: ret=0 04:15:19 point_skyscan result=0 04:15:20 Check angles 04:15:20 SkyScan query 04:15:20 SkyScan query done: ret=0 az=88.62<-5908 ze=155.67<-1622 Statuses=0009 0009 04:15:20 Msec=0 True Az=88.62 Ze=155.67 Az status=0009 Ze status=0009 04:15:20 Check angles 04:15:20 SkyScan query 04:15:21 SkyScan query done: ret=0 az=70.77<-4718 ze=134.28<-3048 Statuses=0009 0009 04:15:21 Msec=750 True Az=70.77 Ze=134.28 Az status=0009 Ze status=0009 04:15:21 Check angles 04:15:21 SkyScan query 04:15:22 SkyScan query done: ret=0 az=53.31<-3554 ze=113.34<-4444 Statuses=0009 0009 04:15:22 Msec=1500 True Az=53.31 Ze=113.34 Az status=0009 Ze status=0009 04:15:22 Check angles 04:15:22 SkyScan query 04:15:22 SkyScan query done: ret=0 az=40.98<-2732 ze=92.34<-5844 Statuses=0009 0009 04:15:22 Msec=2250 True Az=40.98 Ze=92.34 Az status=0009 Ze status=0009 04:15:23 Check angles 04:15:23 SkyScan query 04:15:23 SkyScan query done: ret=0 az=40.995<-2733 ze=70.95<-7270 Statuses=0008 0009 04:15:23 Msec=3000 True Az=40.995 Ze=70.95 Az status=0008 Ze status=0009 04:15:23 Check angles 04:15:23 SkyScan query 04:15:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.69<-8554 Statuses=0008 0009 04:15:24 Msec=3750 True Az=40.995 Ze=51.69 Az status=0008 Ze status=0009 04:15:24 Check angles 04:15:24 SkyScan query 04:15:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:15:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:15:25 Message to Master queued w/err=0: serial=209099 error=0 04:15:27 Received message from Master: op=Identify serial=209100 04:15:30 Received message from Master: op=Filter serial=209103 04:15:30 Color wheel filter change from 0 to 0 04:15:30 FLIGetFilterPos err=0 currentPosition=0 04:15:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:30 Filter is already there-color wheel unchanged 04:15:30 Received message from Master: op=Shutter serial=209104 04:15:30 Shutter LASER close 04:15:30 Received message from Camera: op=State serial=209106 04:15:30 GetSingleValue result=40 Value=cccccccc 04:15:30 SkyScan query 04:15:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:15:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:31 Parameters OK 04:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:31 Set A/D data flow result=40 04:15:31 Set A/D channel type result=40 04:15:31 Set A/D encoding result=40 04:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:31 Set channel filter=0.000000e+000 result=40 04:15:31 Config A/D Result=40 04:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:31 Get A/D filter: -9.255963e+061 result=40 04:15:31 Get A/D value=-858993460 result=40 04:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:31 Parameters OK 04:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:31 Set A/D data flow result=40 04:15:31 Set A/D channel type result=40 04:15:31 Set A/D encoding result=40 04:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:31 Set channel filter=0.000000e+000 result=40 04:15:31 Config A/D Result=40 04:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:31 Get A/D filter: -9.255963e+061 result=40 04:15:31 Get A/D value=-858993460 result=40 04:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:31 Aux= 04:15:31 Message to Camera, serial 209106 queued [UTC 2018-12-17 04:15:52] 04:16:08 Received message from Master: op=PointingHead serial=209119 04:16:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:16:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:16:08 Point started: ret=0 04:16:08 point_skyscan result=0 04:16:09 Check angles 04:16:09 SkyScan query 04:16:09 SkyScan query done: ret=0 az=40.995<-2733 ze=21.15<-10590 Statuses=0008 0009 04:16:09 Msec=0 True Az=40.995 Ze=21.15 Az status=0008 Ze status=0009 04:16:09 Check angles 04:16:09 SkyScan query 04:16:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.24<-12016 Statuses=0008 0009 04:16:10 Msec=750 True Az=40.995 Ze=-0.24 Az status=0008 Ze status=0009 04:16:10 Check angles 04:16:10 SkyScan query 04:16:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.21<-13414 Statuses=0008 0009 04:16:11 Msec=1500 True Az=40.995 Ze=-21.21 Az status=0008 Ze status=0009 04:16:11 Check angles 04:16:11 SkyScan query 04:16:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 04:16:12 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 04:16:12 Check angles 04:16:12 SkyScan query 04:16:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:16:12 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:16:12 Message to Master queued w/err=0: serial=209119 error=0 04:16:17 Received message from Master: op=Filter serial=209120 04:16:17 Color wheel filter change from 0 to 0 04:16:17 FLIGetFilterPos err=0 currentPosition=0 04:16:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:17 Filter is already there-color wheel unchanged 04:16:17 Received message from Master: op=Shutter serial=209121 04:16:17 Shutter LASER close 04:16:18 Received message from Camera: op=State serial=209123 04:16:18 GetSingleValue result=40 Value=cccccccc 04:16:18 SkyScan query 04:16:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:16:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:18 Parameters OK 04:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:18 Set A/D data flow result=40 04:16:18 Set A/D channel type result=40 04:16:18 Set A/D encoding result=40 04:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:18 Set channel filter=0.000000e+000 result=40 04:16:18 Config A/D Result=40 04:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:18 Get A/D filter: -9.255963e+061 result=40 04:16:18 Get A/D value=-858993460 result=40 04:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:18 Parameters OK 04:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:18 Set A/D data flow result=40 04:16:18 Set A/D channel type result=40 04:16:18 Set A/D encoding result=40 04:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:18 Set channel filter=0.000000e+000 result=40 04:16:18 Config A/D Result=40 04:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:18 Get A/D filter: -9.255963e+061 result=40 04:16:18 Get A/D value=-858993460 result=40 04:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:18 Aux= 04:16:18 Message to Camera, serial 209123 queued 04:16:55 Received message from Master: op=PointingHead serial=209136 04:16:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:16:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:16:55 Point started: ret=0 04:16:55 point_skyscan result=0 04:16:56 Check angles 04:16:56 SkyScan query 04:16:57 SkyScan query done: ret=0 az=63.72<-4248 ze=-67.995<-16533 Statuses=0009 0009 04:16:57 Msec=0 True Az=63.72 Ze=-67.995 Az status=0009 Ze status=0009 04:16:57 Check angles 04:16:57 SkyScan query 04:16:57 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.43<-17962 Statuses=0009 0009 04:16:57 Msec=750 True Az=81.57 Ze=-89.43 Az status=0009 Ze status=0009 04:16:58 Check angles 04:16:58 SkyScan query 04:16:58 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.385<-19359 Statuses=0009 0009 04:16:58 Msec=1500 True Az=99.12 Ze=-110.385 Az status=0009 Ze status=0009 04:16:58 Check angles 04:16:58 SkyScan query 04:16:59 SkyScan query done: ret=0 az=116.535<-7769 ze=-131.31<-20754 Statuses=0009 0009 04:16:59 Msec=2250 True Az=116.535 Ze=-131.31 Az status=0009 Ze status=0009 04:16:59 Check angles 04:16:59 SkyScan query 04:17:00 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 04:17:00 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 04:17:00 Check angles 04:17:00 SkyScan query 04:17:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:17:00 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:17:00 Message to Master queued w/err=0: serial=209136 error=0 04:17:05 Received message from Master: op=Filter serial=209137 04:17:05 Color wheel filter change from 0 to 0 04:17:05 FLIGetFilterPos err=0 currentPosition=0 04:17:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:05 Filter is already there-color wheel unchanged 04:17:06 Received message from Master: op=Shutter serial=209138 04:17:06 Shutter LASER close 04:17:06 Received message from Camera: op=State serial=209140 04:17:06 GetSingleValue result=40 Value=cccccccc 04:17:06 SkyScan query 04:17:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:17:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:06 Parameters OK 04:17:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:06 Set A/D data flow result=40 04:17:06 Set A/D channel type result=40 04:17:06 Set A/D encoding result=40 04:17:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:06 Set channel filter=0.000000e+000 result=40 04:17:06 Config A/D Result=40 04:17:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:06 Get A/D filter: -9.255963e+061 result=40 04:17:06 Get A/D value=-858993460 result=40 04:17:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:06 Parameters OK 04:17:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:06 Set A/D data flow result=40 04:17:06 Set A/D channel type result=40 04:17:06 Set A/D encoding result=40 04:17:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:06 Set channel filter=0.000000e+000 result=40 04:17:06 Config A/D Result=40 04:17:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:06 Get A/D filter: -9.255963e+061 result=40 04:17:06 Get A/D value=-858993460 result=40 04:17:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:06 Aux= 04:17:06 Message to Camera, serial 209140 queued 04:17:43 Received message from Master: op=PointingHead serial=209153 04:17:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:17:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:17:43 Point started: ret=0 04:17:43 point_skyscan result=0 04:17:44 Check angles 04:17:44 SkyScan query 04:17:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.24<-23416 Statuses=0009 0009 04:17:45 Msec=0 True Az=112.995 Ze=-171.24 Az status=0009 Ze status=0009 04:17:45 Check angles 04:17:45 SkyScan query 04:17:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:17:45 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:17:45 Message to Master queued w/err=0: serial=209153 error=0 04:17:50 Received message from Master: op=Filter serial=209154 04:17:50 Color wheel filter change from 0 to 0 04:17:50 FLIGetFilterPos err=0 currentPosition=0 04:17:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:50 Filter is already there-color wheel unchanged 04:17:51 Received message from Master: op=Shutter serial=209155 04:17:51 Shutter LASER open 04:17:51 Received message from Camera: op=State serial=209157 04:17:51 GetSingleValue result=40 Value=cccccccc 04:17:51 SkyScan query 04:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:17:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:51 Parameters OK 04:17:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:51 Set A/D data flow result=40 04:17:51 Set A/D channel type result=40 04:17:51 Set A/D encoding result=40 04:17:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:51 Set channel filter=0.000000e+000 result=40 04:17:51 Config A/D Result=40 04:17:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:51 Get A/D filter: -9.255963e+061 result=40 04:17:51 Get A/D value=-858993460 result=40 04:17:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:51 Parameters OK 04:17:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:51 Set A/D data flow result=40 04:17:51 Set A/D channel type result=40 04:17:51 Set A/D encoding result=40 04:17:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:51 Set channel filter=0.000000e+000 result=40 04:17:51 Config A/D Result=40 04:17:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:51 Get A/D filter: -9.255963e+061 result=40 04:17:51 Get A/D value=-858993460 result=40 04:17:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:51 Aux= 04:17:51 Message to Camera, serial 209157 queued 04:17:59 Received message from Master: op=Shutter serial=209166 04:17:59 Shutter LASER close 04:18:00 Received message from Master: op=PointingHead serial=209170 04:18:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:18:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:18:00 Point started: ret=0 04:18:00 point_skyscan result=0 04:18:01 Check angles 04:18:01 SkyScan query 04:18:01 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.49<-21566 Statuses=0009 0009 04:18:01 Msec=0 True Az=135.75 Ze=-143.49 Az status=0009 Ze status=0009 04:18:01 Check angles 04:18:01 SkyScan query 04:18:02 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.025<-20135 Statuses=0009 0009 04:18:02 Msec=750 True Az=153.63 Ze=-122.025 Az status=0009 Ze status=0009 04:18:02 Check angles 04:18:02 SkyScan query 04:18:03 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.575<-18705 Statuses=0009 0009 04:18:03 Msec=1500 True Az=171.48 Ze=-100.575 Az status=0009 Ze status=0009 04:18:03 Check angles 04:18:03 SkyScan query 04:18:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.23<-17282 Statuses=0008 0009 04:18:03 Msec=2250 True Az=175.995 Ze=-79.23 Az status=0008 Ze status=0009 04:18:04 Check angles 04:18:04 SkyScan query 04:18:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.275<-15885 Statuses=0008 0009 04:18:04 Msec=3000 True Az=176.01 Ze=-58.275 Az status=0008 Ze status=0009 04:18:04 Check angles 04:18:04 SkyScan query 04:18:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:18:05 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:18:05 Message to Master queued w/err=0: serial=209170 error=0 04:18:10 Received message from Master: op=Filter serial=209171 04:18:10 Color wheel filter change from 0 to 0 04:18:10 FLIGetFilterPos err=0 currentPosition=0 04:18:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:10 Filter is already there-color wheel unchanged 04:18:10 Received message from Master: op=Shutter serial=209172 04:18:10 Shutter LASER close 04:18:10 Received message from Camera: op=State serial=209174 04:18:10 GetSingleValue result=40 Value=cccccccc 04:18:10 SkyScan query 04:18:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:18:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:11 Parameters OK 04:18:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:11 Set A/D data flow result=40 04:18:11 Set A/D channel type result=40 04:18:11 Set A/D encoding result=40 04:18:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:11 Set channel filter=0.000000e+000 result=40 04:18:11 Config A/D Result=40 04:18:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:11 Get A/D filter: -9.255963e+061 result=40 04:18:11 Get A/D value=-858993460 result=40 04:18:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:11 Parameters OK 04:18:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:11 Set A/D data flow result=40 04:18:11 Set A/D channel type result=40 04:18:11 Set A/D encoding result=40 04:18:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:11 Set channel filter=0.000000e+000 result=40 04:18:11 Config A/D Result=40 04:18:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:11 Get A/D filter: -9.255963e+061 result=40 04:18:11 Get A/D value=-858993460 result=40 04:18:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:11 Aux= 04:18:11 Message to Camera, serial 209174 queued 04:18:48 Received message from Master: op=PointingHead serial=209187 04:18:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:18:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:18:48 Point started: ret=0 04:18:48 point_skyscan result=0 04:18:49 Check angles 04:18:49 SkyScan query 04:18:49 SkyScan query done: ret=0 az=153.135<-10209 ze=-22.065<-13471 Statuses=0009 0009 04:18:49 Msec=0 True Az=153.135 Ze=-22.065 Az status=0009 Ze status=0009 04:18:50 Check angles 04:18:50 SkyScan query 04:18:50 SkyScan query done: ret=0 az=135.735<-9049 ze=-1.065<-12071 Statuses=0009 0009 04:18:50 Msec=750 True Az=135.735 Ze=-1.065 Az status=0009 Ze status=0009 04:18:50 Check angles 04:18:50 SkyScan query 04:18:51 SkyScan query done: ret=0 az=118.2<-7880 ze=19.86<-10676 Statuses=0009 0009 04:18:51 Msec=1500 True Az=118.2 Ze=19.86 Az status=0009 Ze status=0009 04:18:51 Check angles 04:18:51 SkyScan query 04:18:52 SkyScan query done: ret=0 az=100.86<-6724 ze=40.86<-9276 Statuses=0009 0009 04:18:52 Msec=2250 True Az=100.86 Ze=40.86 Az status=0009 Ze status=0009 04:18:52 Check angles 04:18:52 SkyScan query 04:18:52 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 04:18:52 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 04:18:53 Check angles 04:18:53 SkyScan query 04:18:53 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 04:18:53 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 04:18:53 Message to Master queued w/err=0: serial=209187 error=0 04:18:58 Received message from Master: op=Filter serial=209188 04:18:58 Color wheel filter change from 0 to 0 04:18:58 FLIGetFilterPos err=0 currentPosition=0 04:18:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:58 Filter is already there-color wheel unchanged 04:18:58 Received message from Master: op=Shutter serial=209189 04:18:58 Shutter LASER close 04:18:58 Received message from Camera: op=State serial=209191 04:18:58 GetSingleValue result=40 Value=cccccccc 04:18:58 SkyScan query 04:18:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:18:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:59 Parameters OK 04:18:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:59 Set A/D data flow result=40 04:18:59 Set A/D channel type result=40 04:18:59 Set A/D encoding result=40 04:18:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:59 Set channel filter=0.000000e+000 result=40 04:18:59 Config A/D Result=40 04:18:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:59 Get A/D filter: -9.255963e+061 result=40 04:18:59 Get A/D value=-858993460 result=40 04:18:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:59 Parameters OK 04:18:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:59 Set A/D data flow result=40 04:18:59 Set A/D channel type result=40 04:18:59 Set A/D encoding result=40 04:18:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:59 Set channel filter=0.000000e+000 result=40 04:18:59 Config A/D Result=40 04:18:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:59 Get A/D filter: -9.255963e+061 result=40 04:18:59 Get A/D value=-858993460 result=40 04:18:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:59 Aux= 04:18:59 Message to Camera, serial 209191 queued 04:19:36 Received message from Master: op=PointingHead serial=209204 04:19:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:19:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:19:36 Point started: ret=0 04:19:36 point_skyscan result=0 04:19:37 Check angles 04:19:37 SkyScan query 04:19:38 SkyScan query done: ret=0 az=85.995<-5733 ze=21.39<-10574 Statuses=0008 0009 04:19:38 Msec=0 True Az=85.995 Ze=21.39 Az status=0008 Ze status=0009 04:19:38 Check angles 04:19:38 SkyScan query 04:19:38 SkyScan query done: ret=0 az=85.995<-5733 ze=0.465<-11969 Statuses=0008 0009 04:19:38 Msec=750 True Az=85.995 Ze=0.465 Az status=0008 Ze status=0009 04:19:38 Check angles 04:19:38 SkyScan query 04:19:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.52<-13368 Statuses=0008 0009 04:19:39 Msec=1500 True Az=85.995 Ze=-20.52 Az status=0008 Ze status=0009 04:19:39 Check angles 04:19:39 SkyScan query 04:19:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.43<-14762 Statuses=0008 0009 04:19:40 Msec=2250 True Az=85.995 Ze=-41.43 Az status=0008 Ze status=0009 04:19:40 Check angles 04:19:40 SkyScan query 04:19:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:19:41 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:19:41 Message to Master queued w/err=0: serial=209204 error=0 04:19:46 Received message from Master: op=Filter serial=209205 04:19:46 Color wheel filter change from 0 to 0 04:19:46 FLIGetFilterPos err=0 currentPosition=0 04:19:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:46 Filter is already there-color wheel unchanged 04:19:46 Received message from Master: op=Shutter serial=209206 04:19:46 Shutter LASER close 04:19:46 Received message from Camera: op=State serial=209208 04:19:46 GetSingleValue result=40 Value=cccccccc 04:19:46 SkyScan query 04:19:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:19:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:46 Parameters OK 04:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:46 Set A/D data flow result=40 04:19:46 Set A/D channel type result=40 04:19:46 Set A/D encoding result=40 04:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:46 Set channel filter=0.000000e+000 result=40 04:19:46 Config A/D Result=40 04:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:46 Get A/D filter: -9.255963e+061 result=40 04:19:46 Get A/D value=-858993460 result=40 04:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:46 Parameters OK 04:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:46 Set A/D data flow result=40 04:19:46 Set A/D channel type result=40 04:19:46 Set A/D encoding result=40 04:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:46 Set channel filter=0.000000e+000 result=40 04:19:46 Config A/D Result=40 04:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:46 Get A/D filter: -9.255963e+061 result=40 04:19:46 Get A/D value=-858993460 result=40 04:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:46 Aux= 04:19:46 Message to Camera, serial 209208 queued 04:20:23 Received message from Master: op=PointingHead serial=209221 04:20:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:20:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:20:24 Point started: ret=0 04:20:24 point_skyscan result=0 04:20:24 Check angles 04:20:24 SkyScan query 04:20:25 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.3<-17420 Statuses=0009 0009 04:20:25 Msec=0 True Az=108.99 Ze=-81.3 Az status=0009 Ze status=0009 04:20:25 Check angles 04:20:25 SkyScan query 04:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 04:20:26 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 04:20:26 Check angles 04:20:26 SkyScan query 04:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 04:20:26 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 04:20:27 Check angles 04:20:27 SkyScan query 04:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.615<-21641 Statuses=0008 0009 04:20:27 Msec=2250 True Az=112.995 Ze=-144.615 Az status=0008 Ze status=0009 04:20:27 Check angles 04:20:27 SkyScan query 04:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 04:20:28 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 04:20:28 Check angles 04:20:28 SkyScan query 04:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:20:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:20:29 Message to Master queued w/err=0: serial=209221 error=0 04:20:34 Received message from Master: op=Filter serial=209222 04:20:34 Color wheel filter change from 0 to 0 04:20:34 FLIGetFilterPos err=0 currentPosition=0 04:20:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:34 Filter is already there-color wheel unchanged 04:20:34 Received message from Master: op=Shutter serial=209223 04:20:34 Shutter LASER open 04:20:34 Received message from Camera: op=State serial=209225 04:20:34 GetSingleValue result=40 Value=cccccccc 04:20:34 SkyScan query 04:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:20:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:35 Parameters OK 04:20:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:35 Set A/D data flow result=40 04:20:35 Set A/D channel type result=40 04:20:35 Set A/D encoding result=40 04:20:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:35 Set channel filter=0.000000e+000 result=40 04:20:35 Config A/D Result=40 04:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:35 Get A/D filter: -9.255963e+061 result=40 04:20:35 Get A/D value=-858993460 result=40 04:20:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:35 Parameters OK 04:20:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:35 Set A/D data flow result=40 04:20:35 Set A/D channel type result=40 04:20:35 Set A/D encoding result=40 04:20:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:35 Set channel filter=0.000000e+000 result=40 04:20:35 Config A/D Result=40 04:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:35 Get A/D filter: -9.255963e+061 result=40 04:20:35 Get A/D value=-858993460 result=40 04:20:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:35 Aux= 04:20:35 Message to Camera, serial 209225 queued 04:20:43 Received message from Master: op=Shutter serial=209235 04:20:43 Shutter LASER close 04:20:43 Received message from Master: op=PointingHead serial=209239 04:20:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:20:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:20:44 Point started: ret=0 04:20:44 point_skyscan result=0 04:20:44 Check angles 04:20:44 SkyScan query 04:20:45 SkyScan query done: ret=0 az=90.15<-6010 ze=157.41<-1506 Statuses=0009 0009 04:20:45 Msec=0 True Az=90.15 Ze=157.41 Az status=0009 Ze status=0009 04:20:45 Check angles 04:20:45 SkyScan query 04:20:46 SkyScan query done: ret=0 az=72.27<-4818 ze=136.08<-2928 Statuses=0009 0009 04:20:46 Msec=750 True Az=72.27 Ze=136.08 Az status=0009 Ze status=0009 04:20:46 Check angles 04:20:46 SkyScan query 04:20:47 SkyScan query done: ret=0 az=54.63<-3642 ze=114.645<-4357 Statuses=0009 0009 04:20:47 Msec=1500 True Az=54.63 Ze=114.645 Az status=0009 Ze status=0009 04:20:47 Check angles 04:20:47 SkyScan query 04:20:47 SkyScan query done: ret=0 az=40.995<-2733 ze=93.705<-5753 Statuses=0009 0009 04:20:47 Msec=2250 True Az=40.995 Ze=93.705 Az status=0009 Ze status=0009 04:20:48 Check angles 04:20:48 SkyScan query 04:20:48 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 04:20:48 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 04:20:48 Check angles 04:20:48 SkyScan query 04:20:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 04:20:49 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 04:20:49 Check angles 04:20:49 SkyScan query 04:20:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:20:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:20:50 Message to Master queued w/err=0: serial=209239 error=0 04:20:55 Received message from Master: op=Filter serial=209240 04:20:55 Color wheel filter change from 0 to 0 04:20:55 FLIGetFilterPos err=0 currentPosition=0 04:20:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:55 Filter is already there-color wheel unchanged 04:20:55 Received message from Master: op=Shutter serial=209241 04:20:55 Shutter LASER close 04:20:55 Received message from Camera: op=State serial=209243 04:20:55 GetSingleValue result=40 Value=cccccccc 04:20:55 SkyScan query 04:20:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:20:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:56 Parameters OK 04:20:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:56 Set A/D data flow result=40 04:20:56 Set A/D channel type result=40 04:20:56 Set A/D encoding result=40 04:20:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:56 Set channel filter=0.000000e+000 result=40 04:20:56 Config A/D Result=40 04:20:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:56 Get A/D filter: -9.255963e+061 result=40 04:20:56 Get A/D value=-858993460 result=40 04:20:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:56 Parameters OK 04:20:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:56 Set A/D data flow result=40 04:20:56 Set A/D channel type result=40 04:20:56 Set A/D encoding result=40 04:20:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:56 Set channel filter=0.000000e+000 result=40 04:20:56 Config A/D Result=40 04:20:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:56 Get A/D filter: -9.255963e+061 result=40 04:20:56 Get A/D value=-858993460 result=40 04:20:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:56 Aux= 04:20:56 Message to Camera, serial 209243 queued 04:21:32 Received message from Master: op=PointingHead serial=209256 04:21:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:21:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:21:33 Point started: ret=0 04:21:33 point_skyscan result=0 04:21:34 Check angles 04:21:34 SkyScan query 04:21:34 SkyScan query done: ret=0 az=40.995<-2733 ze=21.54<-10564 Statuses=0008 0009 04:21:34 Msec=0 True Az=40.995 Ze=21.54 Az status=0008 Ze status=0009 04:21:34 Check angles 04:21:34 SkyScan query 04:21:35 SkyScan query done: ret=0 az=40.995<-2733 ze=0.54<-11964 Statuses=0008 0009 04:21:35 Msec=750 True Az=40.995 Ze=0.54 Az status=0008 Ze status=0009 04:21:35 Check angles 04:21:35 SkyScan query 04:21:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.4<-13360 Statuses=0008 0009 04:21:36 Msec=1500 True Az=40.995 Ze=-20.4 Az status=0008 Ze status=0009 04:21:36 Check angles 04:21:36 SkyScan query 04:21:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 04:21:36 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 04:21:37 Check angles 04:21:37 SkyScan query 04:21:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:21:37 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:21:37 Message to Master queued w/err=0: serial=209256 error=0 04:21:42 Received message from Master: op=Filter serial=209257 04:21:42 Color wheel filter change from 0 to 0 04:21:42 FLIGetFilterPos err=0 currentPosition=0 04:21:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:42 Filter is already there-color wheel unchanged 04:21:42 Received message from Master: op=Shutter serial=209258 04:21:42 Shutter LASER close 04:21:42 Received message from Camera: op=State serial=209260 04:21:42 GetSingleValue result=40 Value=cccccccc 04:21:42 SkyScan query 04:21:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:43 Parameters OK 04:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:43 Set A/D data flow result=40 04:21:43 Set A/D channel type result=40 04:21:43 Set A/D encoding result=40 04:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:43 Set channel filter=0.000000e+000 result=40 04:21:43 Config A/D Result=40 04:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:43 Get A/D filter: -9.255963e+061 result=40 04:21:43 Get A/D value=-858993460 result=40 04:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:43 Parameters OK 04:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:43 Set A/D data flow result=40 04:21:43 Set A/D channel type result=40 04:21:43 Set A/D encoding result=40 04:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:43 Set channel filter=0.000000e+000 result=40 04:21:43 Config A/D Result=40 04:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:43 Get A/D filter: -9.255963e+061 result=40 04:21:43 Get A/D value=-858993460 result=40 04:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:43 Aux= 04:21:43 Message to Camera, serial 209260 queued 04:22:20 Received message from Master: op=PointingHead serial=209273 04:22:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:22:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:22:20 Point started: ret=0 04:22:20 point_skyscan result=0 04:22:21 Check angles 04:22:21 SkyScan query 04:22:22 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.16<-16544 Statuses=0009 0009 04:22:22 Msec=0 True Az=63.84 Ze=-68.16 Az status=0009 Ze status=0009 04:22:22 Check angles 04:22:22 SkyScan query 04:22:22 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.145<-17943 Statuses=0009 0009 04:22:22 Msec=750 True Az=81.33 Ze=-89.145 Az status=0009 Ze status=0009 04:22:22 Check angles 04:22:22 SkyScan query 04:22:23 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.04<-19336 Statuses=0009 0009 04:22:23 Msec=1500 True Az=98.82 Ze=-110.04 Az status=0009 Ze status=0009 04:22:23 Check angles 04:22:23 SkyScan query 04:22:24 SkyScan query done: ret=0 az=116.205<-7747 ze=-131.025<-20735 Statuses=0009 0009 04:22:24 Msec=2250 True Az=116.205 Ze=-131.025 Az status=0009 Ze status=0009 04:22:24 Check angles 04:22:24 SkyScan query 04:22:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 04:22:25 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 04:22:25 Check angles 04:22:25 SkyScan query 04:22:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:22:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:22:25 Message to Master queued w/err=0: serial=209273 error=0 04:22:30 Received message from Master: op=Filter serial=209274 04:22:30 Color wheel filter change from 0 to 0 04:22:30 FLIGetFilterPos err=0 currentPosition=0 04:22:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:30 Filter is already there-color wheel unchanged 04:22:30 Received message from Master: op=Shutter serial=209275 04:22:30 Shutter LASER close 04:22:31 Received message from Camera: op=State serial=209277 04:22:31 GetSingleValue result=40 Value=cccccccc 04:22:31 SkyScan query 04:22:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:22:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:31 Parameters OK 04:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:31 Set A/D data flow result=40 04:22:31 Set A/D channel type result=40 04:22:31 Set A/D encoding result=40 04:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:31 Set channel filter=0.000000e+000 result=40 04:22:31 Config A/D Result=40 04:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:31 Get A/D filter: -9.255963e+061 result=40 04:22:31 Get A/D value=-858993460 result=40 04:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:31 Parameters OK 04:22:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:31 Set A/D data flow result=40 04:22:31 Set A/D channel type result=40 04:22:31 Set A/D encoding result=40 04:22:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:31 Set channel filter=0.000000e+000 result=40 04:22:31 Config A/D Result=40 04:22:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:31 Get A/D filter: -9.255963e+061 result=40 04:22:31 Get A/D value=-858993460 result=40 04:22:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:31 Aux= 04:22:31 Message to Camera, serial 209277 queued 04:23:07 Received message from Master: op=PointingHead serial=209289 04:23:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:23:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:23:07 Point started: ret=0 04:23:07 point_skyscan result=0 04:23:08 Check angles 04:23:08 SkyScan query 04:23:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 04:23:09 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 04:23:09 Check angles 04:23:09 SkyScan query 04:23:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:23:09 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:23:09 Message to Master queued w/err=0: serial=209289 error=0 04:23:14 Received message from Master: op=Filter serial=209290 04:23:14 Color wheel filter change from 0 to 0 04:23:14 FLIGetFilterPos err=0 currentPosition=0 04:23:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:14 Filter is already there-color wheel unchanged 04:23:15 Received message from Master: op=Shutter serial=209291 04:23:15 Shutter LASER open 04:23:15 Received message from Camera: op=State serial=209293 04:23:15 GetSingleValue result=40 Value=cccccccc 04:23:15 SkyScan query 04:23:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:23:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:15 Parameters OK 04:23:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:15 Set A/D data flow result=40 04:23:15 Set A/D channel type result=40 04:23:15 Set A/D encoding result=40 04:23:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:15 Set channel filter=0.000000e+000 result=40 04:23:15 Config A/D Result=40 04:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:15 Get A/D filter: -9.255963e+061 result=40 04:23:15 Get A/D value=-858993460 result=40 04:23:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:15 Parameters OK 04:23:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:15 Set A/D data flow result=40 04:23:15 Set A/D channel type result=40 04:23:15 Set A/D encoding result=40 04:23:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:15 Set channel filter=0.000000e+000 result=40 04:23:15 Config A/D Result=40 04:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:15 Get A/D filter: -9.255963e+061 result=40 04:23:15 Get A/D value=-858993460 result=40 04:23:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:15 Aux= 04:23:15 Message to Camera, serial 209293 queued 04:23:24 Received message from Master: op=Shutter serial=209303 04:23:24 Shutter LASER close 04:23:24 Received message from Master: op=PointingHead serial=209307 04:23:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:23:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:23:25 Point started: ret=0 04:23:25 point_skyscan result=0 04:23:25 Check angles 04:23:25 SkyScan query 04:23:26 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.58<-21572 Statuses=0009 0009 04:23:26 Msec=0 True Az=135.72 Ze=-143.58 Az status=0009 Ze status=0009 04:23:26 Check angles 04:23:26 SkyScan query 04:23:27 SkyScan query done: ret=0 az=153.315<-10221 ze=-122.58<-20172 Statuses=0009 0009 04:23:27 Msec=750 True Az=153.315 Ze=-122.58 Az status=0009 Ze status=0009 04:23:27 Check angles 04:23:27 SkyScan query 04:23:28 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.7<-18780 Statuses=0009 0009 04:23:28 Msec=1500 True Az=170.79 Ze=-101.7 Az status=0009 Ze status=0009 04:23:28 Check angles 04:23:28 SkyScan query 04:23:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.655<-17377 Statuses=0008 0009 04:23:28 Msec=2250 True Az=175.995 Ze=-80.655 Az status=0008 Ze status=0009 04:23:28 Check angles 04:23:28 SkyScan query 04:23:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.73<-15982 Statuses=0008 0009 04:23:29 Msec=3000 True Az=175.995 Ze=-59.73 Az status=0008 Ze status=0009 04:23:29 Check angles 04:23:29 SkyScan query 04:23:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:23:30 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:23:30 Message to Master queued w/err=0: serial=209307 error=0 04:23:35 Received message from Master: op=Filter serial=209308 04:23:35 Color wheel filter change from 0 to 0 04:23:35 FLIGetFilterPos err=0 currentPosition=0 04:23:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:35 Filter is already there-color wheel unchanged 04:23:35 Received message from Master: op=Shutter serial=209309 04:23:35 Shutter LASER close 04:23:35 Received message from Camera: op=State serial=209311 04:23:35 GetSingleValue result=40 Value=cccccccc 04:23:35 SkyScan query 04:23:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:23:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:36 Parameters OK 04:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:36 Set A/D data flow result=40 04:23:36 Set A/D channel type result=40 04:23:36 Set A/D encoding result=40 04:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:36 Set channel filter=0.000000e+000 result=40 04:23:36 Config A/D Result=40 04:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:36 Get A/D filter: -9.255963e+061 result=40 04:23:36 Get A/D value=-858993460 result=40 04:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:36 Parameters OK 04:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:36 Set A/D data flow result=40 04:23:36 Set A/D channel type result=40 04:23:36 Set A/D encoding result=40 04:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:36 Set channel filter=0.000000e+000 result=40 04:23:36 Config A/D Result=40 04:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:36 Get A/D filter: -9.255963e+061 result=40 04:23:36 Get A/D value=-858993460 result=40 04:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:36 Aux= 04:23:36 Message to Camera, serial 209311 queued 04:24:13 Received message from Master: op=PointingHead serial=209324 04:24:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:24:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:24:13 Point started: ret=0 04:24:13 point_skyscan result=0 04:24:14 Check angles 04:24:14 SkyScan query 04:24:14 SkyScan query done: ret=0 az=152.61<-10174 ze=-21.15<-13410 Statuses=0009 0009 04:24:14 Msec=0 True Az=152.61 Ze=-21.15 Az status=0009 Ze status=0009 04:24:14 Check angles 04:24:14 SkyScan query 04:24:15 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.225<-12015 Statuses=0009 0009 04:24:15 Msec=750 True Az=135.045 Ze=-0.225 Az status=0009 Ze status=0009 04:24:15 Check angles 04:24:15 SkyScan query 04:24:16 SkyScan query done: ret=0 az=117.585<-7839 ze=20.775<-10615 Statuses=0009 0009 04:24:16 Msec=1500 True Az=117.585 Ze=20.775 Az status=0009 Ze status=0009 04:24:16 Check angles 04:24:16 SkyScan query 04:24:16 SkyScan query done: ret=0 az=99.825<-6655 ze=42.135<-9191 Statuses=0009 0009 04:24:16 Msec=2250 True Az=99.825 Ze=42.135 Az status=0009 Ze status=0009 04:24:17 Check angles 04:24:17 SkyScan query 04:24:17 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 04:24:17 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 04:24:17 Check angles 04:24:17 SkyScan query 04:24:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:24:18 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 04:24:18 Message to Master queued w/err=0: serial=209324 error=0 04:24:23 Received message from Master: op=Filter serial=209325 04:24:23 Color wheel filter change from 0 to 0 04:24:23 FLIGetFilterPos err=0 currentPosition=0 04:24:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:23 Filter is already there-color wheel unchanged 04:24:23 Received message from Master: op=Shutter serial=209326 04:24:23 Shutter LASER close 04:24:23 Received message from Camera: op=State serial=209328 04:24:23 GetSingleValue result=40 Value=cccccccc 04:24:23 SkyScan query 04:24:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:24:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:24 Parameters OK 04:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:24 Set A/D data flow result=40 04:24:24 Set A/D channel type result=40 04:24:24 Set A/D encoding result=40 04:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:24 Set channel filter=0.000000e+000 result=40 04:24:24 Config A/D Result=40 04:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:24 Get A/D filter: -9.255963e+061 result=40 04:24:24 Get A/D value=-858993460 result=40 04:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:24 Parameters OK 04:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:24 Set A/D data flow result=40 04:24:24 Set A/D channel type result=40 04:24:24 Set A/D encoding result=40 04:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:24 Set channel filter=0.000000e+000 result=40 04:24:24 Config A/D Result=40 04:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:24 Get A/D filter: -9.255963e+061 result=40 04:24:24 Get A/D value=-858993460 result=40 04:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:24 Aux= 04:24:24 Message to Camera, serial 209328 queued 04:25:01 Received message from Master: op=PointingHead serial=209341 04:25:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:25:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:25:01 Point started: ret=0 04:25:01 point_skyscan result=0 04:25:02 Check angles 04:25:02 SkyScan query 04:25:02 SkyScan query done: ret=0 az=85.995<-5733 ze=21.75<-10550 Statuses=0008 0009 04:25:02 Msec=0 True Az=85.995 Ze=21.75 Az status=0008 Ze status=0009 04:25:03 Check angles 04:25:03 SkyScan query 04:25:03 SkyScan query done: ret=0 az=86.01<-5734 ze=0.345<-11977 Statuses=0008 0009 04:25:03 Msec=750 True Az=86.01 Ze=0.345 Az status=0008 Ze status=0009 04:25:03 Check angles 04:25:03 SkyScan query 04:25:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.61<-13374 Statuses=0008 0009 04:25:04 Msec=1500 True Az=85.995 Ze=-20.61 Az status=0008 Ze status=0009 04:25:04 Check angles 04:25:04 SkyScan query 04:25:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.52<-14768 Statuses=0008 0009 04:25:05 Msec=2250 True Az=85.995 Ze=-41.52 Az status=0008 Ze status=0009 04:25:05 Check angles 04:25:05 SkyScan query 04:25:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 04:25:05 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 04:25:05 Message to Master queued w/err=0: serial=209341 error=0 04:25:10 Received message from Master: op=Filter serial=209342 04:25:10 Color wheel filter change from 0 to 0 04:25:10 FLIGetFilterPos err=0 currentPosition=0 04:25:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:10 Filter is already there-color wheel unchanged 04:25:11 Received message from Master: op=Shutter serial=209343 04:25:11 Shutter LASER close 04:25:11 Received message from Camera: op=State serial=209345 04:25:11 GetSingleValue result=40 Value=cccccccc 04:25:11 SkyScan query 04:25:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:25:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:11 Parameters OK 04:25:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:11 Set A/D data flow result=40 04:25:11 Set A/D channel type result=40 04:25:11 Set A/D encoding result=40 04:25:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:11 Set channel filter=0.000000e+000 result=40 04:25:11 Config A/D Result=40 04:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:11 Get A/D filter: -9.255963e+061 result=40 04:25:11 Get A/D value=-858993460 result=40 04:25:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:11 Parameters OK 04:25:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:11 Set A/D data flow result=40 04:25:11 Set A/D channel type result=40 04:25:11 Set A/D encoding result=40 04:25:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:11 Set channel filter=0.000000e+000 result=40 04:25:11 Config A/D Result=40 04:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:11 Get A/D filter: -9.255963e+061 result=40 04:25:11 Get A/D value=-858993460 result=40 04:25:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:11 Aux= 04:25:11 Message to Camera, serial 209345 queued 04:25:48 Received message from Master: op=PointingHead serial=209358 04:25:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:25:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:25:48 Point started: ret=0 04:25:48 point_skyscan result=0 04:25:49 Check angles 04:25:49 SkyScan query 04:25:50 SkyScan query done: ret=0 az=108.78<-7252 ze=-80.985<-17399 Statuses=0009 0009 04:25:50 Msec=0 True Az=108.78 Ze=-80.985 Az status=0009 Ze status=0009 04:25:50 Check angles 04:25:50 SkyScan query 04:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.94<-18796 Statuses=0008 0009 04:25:51 Msec=750 True Az=112.995 Ze=-101.94 Az status=0008 Ze status=0009 04:25:51 Check angles 04:25:51 SkyScan query 04:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 04:25:51 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 04:25:51 Check angles 04:25:51 SkyScan query 04:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.88<-21592 Statuses=0008 0009 04:25:52 Msec=2250 True Az=112.995 Ze=-143.88 Az status=0008 Ze status=0009 04:25:52 Check angles 04:25:52 SkyScan query 04:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.85<-22990 Statuses=0008 0009 04:25:53 Msec=3000 True Az=112.995 Ze=-164.85 Az status=0008 Ze status=0009 04:25:53 Check angles 04:25:53 SkyScan query 04:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:25:54 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:25:54 Message to Master queued w/err=0: serial=209358 error=0 04:25:59 Received message from Master: op=Filter serial=209359 04:25:59 Color wheel filter change from 0 to 0 04:25:59 FLIGetFilterPos err=0 currentPosition=0 04:25:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:59 Filter is already there-color wheel unchanged 04:25:59 Received message from Master: op=Shutter serial=209360 04:25:59 Shutter LASER open 04:25:59 Received message from Camera: op=State serial=209362 04:25:59 GetSingleValue result=40 Value=cccccccc 04:25:59 SkyScan query 04:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:25:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:59 Parameters OK [UTC 2018-12-17 04:25:59] 04:25:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:00 Set A/D data flow result=40 04:26:00 Set A/D channel type result=40 04:26:00 Set A/D encoding result=40 04:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:00 Set channel filter=0.000000e+000 result=40 04:26:00 Config A/D Result=40 04:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:00 Get A/D filter: -9.255963e+061 result=40 04:26:00 Get A/D value=-858993460 result=40 04:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:00 Parameters OK 04:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:00 Set A/D data flow result=40 04:26:00 Set A/D channel type result=40 04:26:00 Set A/D encoding result=40 04:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:00 Set channel filter=0.000000e+000 result=40 04:26:00 Config A/D Result=40 04:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:00 Get A/D filter: -9.255963e+061 result=40 04:26:00 Get A/D value=-858993460 result=40 04:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:00 Aux= 04:26:00 Message to Camera, serial 209362 queued 04:26:08 Received message from Master: op=Shutter serial=209372 04:26:08 Shutter LASER close 04:26:08 Received message from Master: op=PointingHead serial=209376 04:26:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:26:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:26:09 Point started: ret=0 04:26:09 point_skyscan result=0 04:26:09 Check angles 04:26:09 SkyScan query 04:26:10 SkyScan query done: ret=0 az=89.835<-5989 ze=157.155<-1523 Statuses=0009 0009 04:26:10 Msec=0 True Az=89.835 Ze=157.155 Az status=0009 Ze status=0009 04:26:10 Check angles 04:26:10 SkyScan query 04:26:11 SkyScan query done: ret=0 az=72.39<-4826 ze=136.155<-2923 Statuses=0009 0009 04:26:11 Msec=750 True Az=72.39 Ze=136.155 Az status=0009 Ze status=0009 04:26:11 Check angles 04:26:11 SkyScan query 04:26:12 SkyScan query done: ret=0 az=54.93<-3662 ze=115.245<-4317 Statuses=0009 0009 04:26:12 Msec=1500 True Az=54.93 Ze=115.245 Az status=0009 Ze status=0009 04:26:12 Check angles 04:26:12 SkyScan query 04:26:12 SkyScan query done: ret=0 az=41.01<-2734 ze=93.84<-5744 Statuses=0009 0009 04:26:12 Msec=2250 True Az=41.01 Ze=93.84 Az status=0009 Ze status=0009 04:26:12 Check angles 04:26:12 SkyScan query 04:26:13 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 04:26:13 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 04:26:13 Check angles 04:26:13 SkyScan query 04:26:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 04:26:14 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 04:26:14 Check angles 04:26:14 SkyScan query 04:26:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:26:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:26:15 Message to Master queued w/err=0: serial=209376 error=0 04:26:20 Received message from Master: op=Filter serial=209377 04:26:20 Color wheel filter change from 0 to 0 04:26:20 FLIGetFilterPos err=0 currentPosition=0 04:26:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:20 Filter is already there-color wheel unchanged 04:26:20 Received message from Master: op=Shutter serial=209378 04:26:20 Shutter LASER close 04:26:20 Received message from Camera: op=State serial=209380 04:26:20 GetSingleValue result=40 Value=cccccccc 04:26:20 SkyScan query 04:26:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:26:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:21 Parameters OK 04:26:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:21 Set A/D data flow result=40 04:26:21 Set A/D channel type result=40 04:26:21 Set A/D encoding result=40 04:26:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:21 Set channel filter=0.000000e+000 result=40 04:26:21 Config A/D Result=40 04:26:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:21 Get A/D filter: -9.255963e+061 result=40 04:26:21 Get A/D value=-858993460 result=40 04:26:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:21 Parameters OK 04:26:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:21 Set A/D data flow result=40 04:26:21 Set A/D channel type result=40 04:26:21 Set A/D encoding result=40 04:26:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:21 Set channel filter=0.000000e+000 result=40 04:26:21 Config A/D Result=40 04:26:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:21 Get A/D filter: -9.255963e+061 result=40 04:26:21 Get A/D value=-858993460 result=40 04:26:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:21 Aux= 04:26:21 Message to Camera, serial 209380 queued 04:26:57 Received message from Master: op=PointingHead serial=209393 04:26:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:26:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:26:58 Point started: ret=0 04:26:58 point_skyscan result=0 04:26:59 Check angles 04:26:59 SkyScan query 04:26:59 SkyScan query done: ret=0 az=40.995<-2733 ze=21.9<-10540 Statuses=0008 0009 04:26:59 Msec=0 True Az=40.995 Ze=21.9 Az status=0008 Ze status=0009 04:26:59 Check angles 04:26:59 SkyScan query 04:27:00 SkyScan query done: ret=0 az=40.995<-2733 ze=0.945<-11937 Statuses=0008 0009 04:27:00 Msec=750 True Az=40.995 Ze=0.945 Az status=0008 Ze status=0009 04:27:00 Check angles 04:27:00 SkyScan query 04:27:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-19.965<-13331 Statuses=0008 0009 04:27:01 Msec=1500 True Az=40.995 Ze=-19.965 Az status=0008 Ze status=0009 04:27:01 Check angles 04:27:01 SkyScan query 04:27:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.52<-14568 Statuses=0008 0009 04:27:01 Msec=2250 True Az=40.995 Ze=-38.52 Az status=0008 Ze status=0009 04:27:02 Check angles 04:27:02 SkyScan query 04:27:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:27:02 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:27:02 Message to Master queued w/err=0: serial=209393 error=0 04:27:07 Received message from Master: op=Filter serial=209394 04:27:07 Color wheel filter change from 0 to 0 04:27:07 FLIGetFilterPos err=0 currentPosition=0 04:27:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:07 Filter is already there-color wheel unchanged 04:27:07 Received message from Master: op=Shutter serial=209395 04:27:07 Shutter LASER close 04:27:07 Received message from Camera: op=State serial=209397 04:27:07 GetSingleValue result=40 Value=cccccccc 04:27:07 SkyScan query 04:27:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:27:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:08 Parameters OK 04:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:08 Set A/D data flow result=40 04:27:08 Set A/D channel type result=40 04:27:08 Set A/D encoding result=40 04:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:08 Set channel filter=0.000000e+000 result=40 04:27:08 Config A/D Result=40 04:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:08 Get A/D filter: -9.255963e+061 result=40 04:27:08 Get A/D value=-858993460 result=40 04:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:08 Parameters OK 04:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:08 Set A/D data flow result=40 04:27:08 Set A/D channel type result=40 04:27:08 Set A/D encoding result=40 04:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:08 Set channel filter=0.000000e+000 result=40 04:27:08 Config A/D Result=40 04:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:08 Get A/D filter: -9.255963e+061 result=40 04:27:08 Get A/D value=-858993460 result=40 04:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:08 Aux= 04:27:08 Message to Camera, serial 209397 queued 04:27:45 Received message from Master: op=PointingHead serial=209410 04:27:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:27:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:27:45 Point started: ret=0 04:27:45 point_skyscan result=0 04:27:46 Check angles 04:27:46 SkyScan query 04:27:46 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.055<-16537 Statuses=0009 0009 04:27:46 Msec=0 True Az=63.84 Ze=-68.055 Az status=0009 Ze status=0009 04:27:47 Check angles 04:27:47 SkyScan query 04:27:47 SkyScan query done: ret=0 az=81.18<-5412 ze=-89.025<-17935 Statuses=0009 0009 04:27:47 Msec=750 True Az=81.18 Ze=-89.025 Az status=0009 Ze status=0009 04:27:47 Check angles 04:27:47 SkyScan query 04:27:48 SkyScan query done: ret=0 az=98.64<-6576 ze=-109.935<-19329 Statuses=0009 0009 04:27:48 Msec=1500 True Az=98.64 Ze=-109.935 Az status=0009 Ze status=0009 04:27:48 Check angles 04:27:48 SkyScan query 04:27:49 SkyScan query done: ret=0 az=116.085<-7739 ze=-130.92<-20728 Statuses=0009 0009 04:27:49 Msec=2250 True Az=116.085 Ze=-130.92 Az status=0009 Ze status=0009 04:27:49 Check angles 04:27:49 SkyScan query 04:27:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 04:27:49 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 04:27:50 Check angles 04:27:50 SkyScan query 04:27:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:27:50 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:27:50 Message to Master queued w/err=0: serial=209410 error=0 04:27:55 Received message from Master: op=Filter serial=209411 04:27:55 Color wheel filter change from 0 to 0 04:27:55 FLIGetFilterPos err=0 currentPosition=0 04:27:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:55 Filter is already there-color wheel unchanged 04:27:55 Received message from Master: op=Shutter serial=209412 04:27:55 Shutter LASER close 04:27:55 Received message from Camera: op=State serial=209414 04:27:55 GetSingleValue result=40 Value=cccccccc 04:27:55 SkyScan query 04:27:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:27:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:56 Parameters OK 04:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:56 Set A/D data flow result=40 04:27:56 Set A/D channel type result=40 04:27:56 Set A/D encoding result=40 04:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:56 Set channel filter=0.000000e+000 result=40 04:27:56 Config A/D Result=40 04:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:56 Get A/D filter: -9.255963e+061 result=40 04:27:56 Get A/D value=-858993460 result=40 04:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:56 Parameters OK 04:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:56 Set A/D data flow result=40 04:27:56 Set A/D channel type result=40 04:27:56 Set A/D encoding result=40 04:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:56 Set channel filter=0.000000e+000 result=40 04:27:56 Config A/D Result=40 04:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:56 Get A/D filter: -9.255963e+061 result=40 04:27:56 Get A/D value=-858993460 result=40 04:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:56 Aux= 04:27:56 Message to Camera, serial 209414 queued 04:28:33 Received message from Master: op=PointingHead serial=209427 04:28:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:28:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:28:33 Point started: ret=0 04:28:33 point_skyscan result=0 04:28:34 Check angles 04:28:34 SkyScan query 04:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 04:28:34 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 04:28:35 Check angles 04:28:35 SkyScan query 04:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:28:35 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:28:35 Message to Master queued w/err=0: serial=209427 error=0 04:28:40 Received message from Master: op=Filter serial=209428 04:28:40 Color wheel filter change from 0 to 0 04:28:40 FLIGetFilterPos err=0 currentPosition=0 04:28:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:40 Filter is already there-color wheel unchanged 04:28:40 Received message from Master: op=Shutter serial=209429 04:28:40 Shutter LASER open 04:28:41 Received message from Camera: op=State serial=209431 04:28:41 GetSingleValue result=40 Value=cccccccc 04:28:41 SkyScan query 04:28:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:28:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:41 Parameters OK 04:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:41 Set A/D data flow result=40 04:28:41 Set A/D channel type result=40 04:28:41 Set A/D encoding result=40 04:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:41 Set channel filter=0.000000e+000 result=40 04:28:41 Config A/D Result=40 04:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:41 Get A/D filter: -9.255963e+061 result=40 04:28:41 Get A/D value=-858993460 result=40 04:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:41 Parameters OK 04:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:41 Set A/D data flow result=40 04:28:41 Set A/D channel type result=40 04:28:41 Set A/D encoding result=40 04:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:41 Set channel filter=0.000000e+000 result=40 04:28:41 Config A/D Result=40 04:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:41 Get A/D filter: -9.255963e+061 result=40 04:28:41 Get A/D value=-858993460 result=40 04:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:41 Aux= 04:28:41 Message to Camera, serial 209431 queued 04:28:50 Received message from Master: op=Shutter serial=209441 04:28:50 Shutter LASER close 04:28:50 Received message from Master: op=PointingHead serial=209445 04:28:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:28:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:28:51 Point started: ret=0 04:28:51 point_skyscan result=0 04:28:51 Check angles 04:28:51 SkyScan query 04:28:52 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.475<-21565 Statuses=0009 0009 04:28:52 Msec=0 True Az=135.765 Ze=-143.475 Az status=0009 Ze status=0009 04:28:52 Check angles 04:28:52 SkyScan query 04:28:53 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.49<-20166 Statuses=0009 0009 04:28:53 Msec=750 True Az=153.3 Ze=-122.49 Az status=0009 Ze status=0009 04:28:53 Check angles 04:28:53 SkyScan query 04:28:53 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.085<-18739 Statuses=0009 0009 04:28:53 Msec=1500 True Az=170.955 Ze=-101.085 Az status=0009 Ze status=0009 04:28:54 Check angles 04:28:54 SkyScan query 04:28:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.55<-17370 Statuses=0008 0009 04:28:54 Msec=2250 True Az=175.995 Ze=-80.55 Az status=0008 Ze status=0009 04:28:54 Check angles 04:28:54 SkyScan query 04:28:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.625<-15975 Statuses=0008 0009 04:28:55 Msec=3000 True Az=175.995 Ze=-59.625 Az status=0008 Ze status=0009 04:28:55 Check angles 04:28:55 SkyScan query 04:28:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:28:56 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:28:56 Message to Master queued w/err=0: serial=209445 error=0 04:29:01 Received message from Master: op=Filter serial=209446 04:29:01 Color wheel filter change from 0 to 0 04:29:01 FLIGetFilterPos err=0 currentPosition=0 04:29:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:01 Filter is already there-color wheel unchanged 04:29:01 Received message from Master: op=Shutter serial=209447 04:29:01 Shutter LASER close 04:29:01 Received message from Camera: op=State serial=209449 04:29:01 GetSingleValue result=40 Value=cccccccc 04:29:01 SkyScan query 04:29:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:29:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:02 Parameters OK 04:29:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:02 Set A/D data flow result=40 04:29:02 Set A/D channel type result=40 04:29:02 Set A/D encoding result=40 04:29:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:02 Set channel filter=0.000000e+000 result=40 04:29:02 Config A/D Result=40 04:29:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:02 Get A/D filter: -9.255963e+061 result=40 04:29:02 Get A/D value=-858993460 result=40 04:29:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:02 Parameters OK 04:29:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:02 Set A/D data flow result=40 04:29:02 Set A/D channel type result=40 04:29:02 Set A/D encoding result=40 04:29:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:02 Set channel filter=0.000000e+000 result=40 04:29:02 Config A/D Result=40 04:29:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:02 Get A/D filter: -9.255963e+061 result=40 04:29:02 Get A/D value=-858993460 result=40 04:29:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:02 Aux= 04:29:02 Message to Camera, serial 209449 queued 04:29:38 Received message from Master: op=PointingHead serial=209462 04:29:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:29:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:29:39 Point started: ret=0 04:29:39 point_skyscan result=0 04:29:39 Check angles 04:29:39 SkyScan query 04:29:40 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.005<-13467 Statuses=0009 0009 04:29:40 Msec=0 True Az=153.195 Ze=-22.005 Az status=0009 Ze status=0009 04:29:40 Check angles 04:29:40 SkyScan query 04:29:41 SkyScan query done: ret=0 az=135.81<-9054 ze=-1.005<-12067 Statuses=0009 0009 04:29:41 Msec=750 True Az=135.81 Ze=-1.005 Az status=0009 Ze status=0009 04:29:41 Check angles 04:29:41 SkyScan query 04:29:42 SkyScan query done: ret=0 az=118.215<-7881 ze=19.92<-10672 Statuses=0009 0009 04:29:42 Msec=1500 True Az=118.215 Ze=19.92 Az status=0009 Ze status=0009 04:29:42 Check angles 04:29:42 SkyScan query 04:29:42 SkyScan query done: ret=0 az=100.875<-6725 ze=40.89<-9274 Statuses=0009 0009 04:29:42 Msec=2250 True Az=100.875 Ze=40.89 Az status=0009 Ze status=0009 04:29:42 Check angles 04:29:42 SkyScan query 04:29:43 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 04:29:43 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 04:29:43 Check angles 04:29:43 SkyScan query 04:29:44 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 04:29:44 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 04:29:44 Message to Master queued w/err=0: serial=209462 error=0 04:29:49 Received message from Master: op=Filter serial=209463 04:29:49 Color wheel filter change from 0 to 0 04:29:49 FLIGetFilterPos err=0 currentPosition=0 04:29:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:49 Filter is already there-color wheel unchanged 04:29:49 Received message from Master: op=Shutter serial=209464 04:29:49 Shutter LASER close 04:29:49 Received message from Camera: op=State serial=209466 04:29:49 GetSingleValue result=40 Value=cccccccc 04:29:49 SkyScan query 04:29:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:29:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:50 Parameters OK 04:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:50 Set A/D data flow result=40 04:29:50 Set A/D channel type result=40 04:29:50 Set A/D encoding result=40 04:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:50 Set channel filter=0.000000e+000 result=40 04:29:50 Config A/D Result=40 04:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:50 Get A/D filter: -9.255963e+061 result=40 04:29:50 Get A/D value=-858993460 result=40 04:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:50 Parameters OK 04:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:50 Set A/D data flow result=40 04:29:50 Set A/D channel type result=40 04:29:50 Set A/D encoding result=40 04:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:50 Set channel filter=0.000000e+000 result=40 04:29:50 Config A/D Result=40 04:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:50 Get A/D filter: -9.255963e+061 result=40 04:29:50 Get A/D value=-858993460 result=40 04:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:50 Aux= 04:29:50 Message to Camera, serial 209466 queued 04:30:27 Received message from Master: op=PointingHead serial=209479 04:30:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:30:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:30:27 Point started: ret=0 04:30:27 point_skyscan result=0 04:30:28 Check angles 04:30:28 SkyScan query 04:30:28 SkyScan query done: ret=0 az=85.995<-5733 ze=21.975<-10535 Statuses=0008 0009 04:30:28 Msec=0 True Az=85.995 Ze=21.975 Az status=0008 Ze status=0009 04:30:28 Check angles 04:30:28 SkyScan query 04:30:29 SkyScan query done: ret=0 az=85.995<-5733 ze=1.035<-11931 Statuses=0008 0009 04:30:29 Msec=750 True Az=85.995 Ze=1.035 Az status=0008 Ze status=0009 04:30:29 Check angles 04:30:29 SkyScan query 04:30:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-19.935<-13329 Statuses=0008 0009 04:30:30 Msec=1500 True Az=85.995 Ze=-19.935 Az status=0008 Ze status=0009 04:30:30 Check angles 04:30:30 SkyScan query 04:30:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.295<-14753 Statuses=0008 0009 04:30:30 Msec=2250 True Az=85.995 Ze=-41.295 Az status=0008 Ze status=0009 04:30:31 Check angles 04:30:31 SkyScan query 04:30:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:30:31 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:30:31 Message to Master queued w/err=0: serial=209479 error=0 04:30:36 Received message from Master: op=Filter serial=209480 04:30:36 Color wheel filter change from 0 to 0 04:30:36 FLIGetFilterPos err=0 currentPosition=0 04:30:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:36 Filter is already there-color wheel unchanged 04:30:36 Received message from Master: op=Shutter serial=209481 04:30:36 Shutter LASER close 04:30:36 Received message from Camera: op=State serial=209483 04:30:36 GetSingleValue result=40 Value=cccccccc 04:30:36 SkyScan query 04:30:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:30:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:37 Parameters OK 04:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:37 Set A/D data flow result=40 04:30:37 Set A/D channel type result=40 04:30:37 Set A/D encoding result=40 04:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:37 Set channel filter=0.000000e+000 result=40 04:30:37 Config A/D Result=40 04:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:37 Get A/D filter: -9.255963e+061 result=40 04:30:37 Get A/D value=-858993460 result=40 04:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:37 Parameters OK 04:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:37 Set A/D data flow result=40 04:30:37 Set A/D channel type result=40 04:30:37 Set A/D encoding result=40 04:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:37 Set channel filter=0.000000e+000 result=40 04:30:37 Config A/D Result=40 04:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:37 Get A/D filter: -9.255963e+061 result=40 04:30:37 Get A/D value=-858993460 result=40 04:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:37 Aux= 04:30:37 Message to Camera, serial 209483 queued 04:31:13 Received message from Master: op=PointingHead serial=209495 04:31:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:31:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:31:13 Point started: ret=0 04:31:13 point_skyscan result=0 04:31:14 Check angles 04:31:14 SkyScan query 04:31:15 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.795<-17453 Statuses=0009 0009 04:31:15 Msec=0 True Az=109.38 Ze=-81.795 Az status=0009 Ze status=0009 04:31:15 Check angles 04:31:15 SkyScan query 04:31:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 04:31:15 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 04:31:15 Check angles 04:31:15 SkyScan query 04:31:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 04:31:16 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 04:31:16 Check angles 04:31:16 SkyScan query 04:31:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 04:31:17 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 04:31:17 Check angles 04:31:17 SkyScan query 04:31:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 04:31:18 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 04:31:18 Check angles 04:31:18 SkyScan query 04:31:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:31:18 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:31:18 Message to Master queued w/err=0: serial=209495 error=0 04:31:23 Received message from Master: op=Filter serial=209496 04:31:23 Color wheel filter change from 0 to 0 04:31:23 FLIGetFilterPos err=0 currentPosition=0 04:31:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:23 Filter is already there-color wheel unchanged 04:31:23 Received message from Master: op=Shutter serial=209497 04:31:23 Shutter LASER open 04:31:24 Received message from Camera: op=State serial=209499 04:31:24 GetSingleValue result=40 Value=cccccccc 04:31:24 SkyScan query 04:31:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:31:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:24 Parameters OK 04:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:24 Set A/D data flow result=40 04:31:24 Set A/D channel type result=40 04:31:24 Set A/D encoding result=40 04:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:24 Set channel filter=0.000000e+000 result=40 04:31:24 Config A/D Result=40 04:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:24 Get A/D filter: -9.255963e+061 result=40 04:31:24 Get A/D value=-858993460 result=40 04:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:24 Parameters OK 04:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:24 Set A/D data flow result=40 04:31:24 Set A/D channel type result=40 04:31:24 Set A/D encoding result=40 04:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:24 Set channel filter=0.000000e+000 result=40 04:31:24 Config A/D Result=40 04:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:24 Get A/D filter: -9.255963e+061 result=40 04:31:24 Get A/D value=-858993460 result=40 04:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:24 Aux= 04:31:24 Message to Camera, serial 209499 queued 04:31:33 Received message from Master: op=Shutter serial=209509 04:31:33 Shutter LASER close 04:31:33 Received message from Master: op=PointingHead serial=209513 04:31:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:31:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:31:33 Point started: ret=0 04:31:33 point_skyscan result=0 04:31:34 Check angles 04:31:34 SkyScan query 04:31:35 SkyScan query done: ret=0 az=89.805<-5987 ze=157.02<-1532 Statuses=0009 0009 04:31:35 Msec=0 True Az=89.805 Ze=157.02 Az status=0009 Ze status=0009 04:31:35 Check angles 04:31:35 SkyScan query 04:31:36 SkyScan query done: ret=0 az=72.3<-4820 ze=136.065<-2929 Statuses=0009 0009 04:31:36 Msec=750 True Az=72.3 Ze=136.065 Az status=0009 Ze status=0009 04:31:36 Check angles 04:31:36 SkyScan query 04:31:36 SkyScan query done: ret=0 az=54.945<-3663 ze=115.14<-4324 Statuses=0009 0009 04:31:36 Msec=1500 True Az=54.945 Ze=115.14 Az status=0009 Ze status=0009 04:31:36 Check angles 04:31:36 SkyScan query 04:31:37 SkyScan query done: ret=0 az=41.025<-2735 ze=94.14<-5724 Statuses=0009 0009 04:31:37 Msec=2250 True Az=41.025 Ze=94.14 Az status=0009 Ze status=0009 04:31:37 Check angles 04:31:37 SkyScan query 04:31:38 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 04:31:38 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 04:31:38 Check angles 04:31:38 SkyScan query 04:31:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 04:31:39 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 04:31:39 Check angles 04:31:39 SkyScan query 04:31:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:31:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:31:39 Message to Master queued w/err=0: serial=209513 error=0 04:31:44 Received message from Master: op=Filter serial=209514 04:31:44 Color wheel filter change from 0 to 0 04:31:44 FLIGetFilterPos err=0 currentPosition=0 04:31:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:44 Filter is already there-color wheel unchanged 04:31:44 Received message from Master: op=Shutter serial=209515 04:31:44 Shutter LASER close 04:31:45 Received message from Camera: op=State serial=209517 04:31:45 GetSingleValue result=40 Value=cccccccc 04:31:45 SkyScan query 04:31:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:31:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:45 Parameters OK 04:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:45 Set A/D data flow result=40 04:31:45 Set A/D channel type result=40 04:31:45 Set A/D encoding result=40 04:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:45 Set channel filter=0.000000e+000 result=40 04:31:45 Config A/D Result=40 04:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:45 Get A/D filter: -9.255963e+061 result=40 04:31:45 Get A/D value=-858993460 result=40 04:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:45 Parameters OK 04:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:45 Set A/D data flow result=40 04:31:45 Set A/D channel type result=40 04:31:45 Set A/D encoding result=40 04:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:45 Set channel filter=0.000000e+000 result=40 04:31:45 Config A/D Result=40 04:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:45 Get A/D filter: -9.255963e+061 result=40 04:31:45 Get A/D value=-858993460 result=40 04:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:45 Aux= 04:31:45 Message to Camera, serial 209517 queued 04:32:22 Received message from Master: op=PointingHead serial=209530 04:32:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:32:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:32:23 Point started: ret=0 04:32:23 point_skyscan result=0 04:32:23 Check angles 04:32:23 SkyScan query 04:32:24 SkyScan query done: ret=0 az=40.995<-2733 ze=21.72<-10552 Statuses=0008 0009 04:32:24 Msec=0 True Az=40.995 Ze=21.72 Az status=0008 Ze status=0009 04:32:24 Check angles 04:32:24 SkyScan query 04:32:25 SkyScan query done: ret=0 az=40.995<-2733 ze=0.78<-11948 Statuses=0008 0009 04:32:25 Msec=750 True Az=40.995 Ze=0.78 Az status=0008 Ze status=0009 04:32:25 Check angles 04:32:25 SkyScan query 04:32:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.64<-13376 Statuses=0008 0009 04:32:25 Msec=1500 True Az=40.995 Ze=-20.64 Az status=0008 Ze status=0009 04:32:26 Check angles 04:32:26 SkyScan query 04:32:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 04:32:26 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 04:32:26 Check angles 04:32:26 SkyScan query 04:32:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:32:27 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:32:27 Message to Master queued w/err=0: serial=209530 error=0 04:32:32 Received message from Master: op=Filter serial=209531 04:32:32 Color wheel filter change from 0 to 0 04:32:32 FLIGetFilterPos err=0 currentPosition=0 04:32:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:32 Filter is already there-color wheel unchanged 04:32:32 Received message from Master: op=Shutter serial=209532 04:32:32 Shutter LASER close 04:32:32 Received message from Camera: op=State serial=209534 04:32:32 GetSingleValue result=40 Value=cccccccc 04:32:32 SkyScan query 04:32:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:32:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:33 Parameters OK 04:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:33 Set A/D data flow result=40 04:32:33 Set A/D channel type result=40 04:32:33 Set A/D encoding result=40 04:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:33 Set channel filter=0.000000e+000 result=40 04:32:33 Config A/D Result=40 04:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:33 Get A/D filter: -9.255963e+061 result=40 04:32:33 Get A/D value=-858993460 result=40 04:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:33 Parameters OK 04:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:33 Set A/D data flow result=40 04:32:33 Set A/D channel type result=40 04:32:33 Set A/D encoding result=40 04:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:33 Set channel filter=0.000000e+000 result=40 04:32:33 Config A/D Result=40 04:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:33 Get A/D filter: -9.255963e+061 result=40 04:32:33 Get A/D value=-858993460 result=40 04:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:33 Aux= 04:32:33 Message to Camera, serial 209534 queued 04:33:09 Received message from Master: op=PointingHead serial=209547 04:33:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:33:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:33:10 Point started: ret=0 04:33:10 point_skyscan result=0 04:33:11 Check angles 04:33:11 SkyScan query 04:33:11 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.355<-16557 Statuses=0009 0009 04:33:11 Msec=0 True Az=63.99 Ze=-68.355 Az status=0009 Ze status=0009 04:33:11 Check angles 04:33:11 SkyScan query 04:33:12 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.76<-17984 Statuses=0009 0009 04:33:12 Msec=750 True Az=81.84 Ze=-89.76 Az status=0009 Ze status=0009 04:33:12 Check angles 04:33:12 SkyScan query 04:33:13 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.775<-19385 Statuses=0009 0009 04:33:13 Msec=1500 True Az=99.36 Ze=-110.775 Az status=0009 Ze status=0009 04:33:13 Check angles 04:33:13 SkyScan query 04:33:13 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.685<-20779 Statuses=0009 0009 04:33:13 Msec=2250 True Az=116.775 Ze=-131.685 Az status=0009 Ze status=0009 04:33:14 Check angles 04:33:14 SkyScan query 04:33:14 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 04:33:14 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 04:33:14 Check angles 04:33:14 SkyScan query 04:33:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:33:15 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:33:15 Message to Master queued w/err=0: serial=209547 error=0 04:33:20 Received message from Master: op=Filter serial=209548 04:33:20 Color wheel filter change from 0 to 0 04:33:20 FLIGetFilterPos err=0 currentPosition=0 04:33:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:20 Filter is already there-color wheel unchanged 04:33:20 Received message from Master: op=Shutter serial=209549 04:33:20 Shutter LASER close 04:33:20 Received message from Camera: op=State serial=209551 04:33:20 GetSingleValue result=40 Value=cccccccc 04:33:20 SkyScan query 04:33:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:33:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:21 Parameters OK 04:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:21 Set A/D data flow result=40 04:33:21 Set A/D channel type result=40 04:33:21 Set A/D encoding result=40 04:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:21 Set channel filter=0.000000e+000 result=40 04:33:21 Config A/D Result=40 04:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:21 Get A/D filter: -9.255963e+061 result=40 04:33:21 Get A/D value=-858993460 result=40 04:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:21 Parameters OK 04:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:21 Set A/D data flow result=40 04:33:21 Set A/D channel type result=40 04:33:21 Set A/D encoding result=40 04:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:21 Set channel filter=0.000000e+000 result=40 04:33:21 Config A/D Result=40 04:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:21 Get A/D filter: -9.255963e+061 result=40 04:33:21 Get A/D value=-858993460 result=40 04:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:21 Aux= 04:33:21 Message to Camera, serial 209551 queued 04:33:58 Received message from Master: op=PointingHead serial=209564 04:33:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:33:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:33:58 Point started: ret=0 04:33:58 point_skyscan result=0 04:33:59 Check angles 04:33:59 SkyScan query 04:33:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 04:33:59 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 04:33:59 Check angles 04:33:59 SkyScan query 04:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:34:00 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:34:00 Message to Master queued w/err=0: serial=209564 error=0 04:34:05 Received message from Master: op=Filter serial=209565 04:34:05 Color wheel filter change from 0 to 0 04:34:05 FLIGetFilterPos err=0 currentPosition=0 04:34:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:05 Filter is already there-color wheel unchanged 04:34:05 Received message from Master: op=Shutter serial=209566 04:34:05 Shutter LASER open 04:34:05 Received message from Camera: op=State serial=209568 04:34:05 GetSingleValue result=40 Value=cccccccc 04:34:05 SkyScan query 04:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:34:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:06 Parameters OK 04:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:06 Set A/D data flow result=40 04:34:06 Set A/D channel type result=40 04:34:06 Set A/D encoding result=40 04:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:06 Set channel filter=0.000000e+000 result=40 04:34:06 Config A/D Result=40 04:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:06 Get A/D filter: -9.255963e+061 result=40 04:34:06 Get A/D value=-858993460 result=40 04:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:06 Parameters OK 04:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:06 Set A/D data flow result=40 04:34:06 Set A/D channel type result=40 04:34:06 Set A/D encoding result=40 04:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:06 Set channel filter=0.000000e+000 result=40 04:34:06 Config A/D Result=40 04:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:06 Get A/D filter: -9.255963e+061 result=40 04:34:06 Get A/D value=-858993460 result=40 04:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:06 Aux= 04:34:06 Message to Camera, serial 209568 queued 04:34:14 Received message from Master: op=Shutter serial=209578 04:34:14 Shutter LASER close 04:34:15 Received message from Master: op=PointingHead serial=209582 04:34:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:34:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:34:15 Point started: ret=0 04:34:15 point_skyscan result=0 04:34:16 Check angles 04:34:16 SkyScan query 04:34:17 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.86<-21524 Statuses=0009 0009 04:34:17 Msec=0 True Az=136.35 Ze=-142.86 Az status=0009 Ze status=0009 04:34:17 Check angles 04:34:17 SkyScan query 04:34:17 SkyScan query done: ret=0 az=154.005<-10267 ze=-121.5<-20100 Statuses=0009 0009 04:34:17 Msec=750 True Az=154.005 Ze=-121.5 Az status=0009 Ze status=0009 04:34:18 Check angles 04:34:18 SkyScan query 04:34:18 SkyScan query done: ret=0 az=171.66<-11444 ze=-100.425<-18695 Statuses=0009 0009 04:34:18 Msec=1500 True Az=171.66 Ze=-100.425 Az status=0009 Ze status=0009 04:34:18 Check angles 04:34:18 SkyScan query 04:34:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.02<-17268 Statuses=0008 0009 04:34:19 Msec=2250 True Az=175.995 Ze=-79.02 Az status=0008 Ze status=0009 04:34:19 Check angles 04:34:19 SkyScan query 04:34:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.095<-15873 Statuses=0008 0009 04:34:20 Msec=3000 True Az=175.995 Ze=-58.095 Az status=0008 Ze status=0009 04:34:20 Check angles 04:34:20 SkyScan query 04:34:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:34:20 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:34:20 Message to Master queued w/err=0: serial=209582 error=0 04:34:25 Received message from Master: op=Filter serial=209583 04:34:25 Color wheel filter change from 0 to 0 04:34:25 FLIGetFilterPos err=0 currentPosition=0 04:34:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:25 Filter is already there-color wheel unchanged 04:34:26 Received message from Master: op=Shutter serial=209584 04:34:26 Shutter LASER close 04:34:26 Received message from Camera: op=State serial=209586 04:34:26 GetSingleValue result=40 Value=cccccccc 04:34:26 SkyScan query 04:34:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:34:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:26 Parameters OK 04:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:26 Set A/D data flow result=40 04:34:26 Set A/D channel type result=40 04:34:26 Set A/D encoding result=40 04:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:26 Set channel filter=0.000000e+000 result=40 04:34:26 Config A/D Result=40 04:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:26 Get A/D filter: -9.255963e+061 result=40 04:34:26 Get A/D value=-858993460 result=40 04:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:26 Parameters OK 04:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:26 Set A/D data flow result=40 04:34:26 Set A/D channel type result=40 04:34:26 Set A/D encoding result=40 04:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:26 Set channel filter=0.000000e+000 result=40 04:34:26 Config A/D Result=40 04:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:26 Get A/D filter: -9.255963e+061 result=40 04:34:26 Get A/D value=-858993460 result=40 04:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:26 Aux= 04:34:26 Message to Camera, serial 209586 queued 04:35:03 Received message from Master: op=PointingHead serial=209599 04:35:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:35:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:35:04 Point started: ret=0 04:35:04 point_skyscan result=0 04:35:04 Check angles 04:35:04 SkyScan query 04:35:05 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.66<-13444 Statuses=0009 0009 04:35:05 Msec=0 True Az=152.94 Ze=-21.66 Az status=0009 Ze status=0009 04:35:05 Check angles 04:35:05 SkyScan query 04:35:06 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.66<-12044 Statuses=0009 0009 04:35:06 Msec=750 True Az=135.42 Ze=-0.66 Az status=0009 Ze status=0009 04:35:06 Check angles 04:35:06 SkyScan query 04:35:06 SkyScan query done: ret=0 az=117.78<-7852 ze=20.28<-10648 Statuses=0009 0009 04:35:06 Msec=1500 True Az=117.78 Ze=20.28 Az status=0009 Ze status=0009 04:35:07 Check angles 04:35:07 SkyScan query 04:35:07 SkyScan query done: ret=0 az=100.44<-6696 ze=41.265<-9249 Statuses=0009 0009 04:35:07 Msec=2250 True Az=100.44 Ze=41.265 Az status=0009 Ze status=0009 04:35:07 Check angles 04:35:07 SkyScan query 04:35:08 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 04:35:08 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 04:35:08 Check angles 04:35:08 SkyScan query 04:35:09 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 04:35:09 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 04:35:09 Message to Master queued w/err=0: serial=209599 error=0 04:35:14 Received message from Master: op=Filter serial=209600 04:35:14 Color wheel filter change from 0 to 0 04:35:14 FLIGetFilterPos err=0 currentPosition=0 04:35:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:14 Filter is already there-color wheel unchanged 04:35:14 Received message from Master: op=Shutter serial=209601 04:35:14 Shutter LASER close 04:35:14 Received message from Camera: op=State serial=209603 04:35:14 GetSingleValue result=40 Value=cccccccc 04:35:14 SkyScan query 04:35:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:35:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:14 Parameters OK 04:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:14 Set A/D data flow result=40 04:35:14 Set A/D channel type result=40 04:35:14 Set A/D encoding result=40 04:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:14 Set channel filter=0.000000e+000 result=40 04:35:14 Config A/D Result=40 04:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:14 Get A/D filter: -9.255963e+061 result=40 04:35:14 Get A/D value=-858993460 result=40 04:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:14 Parameters OK 04:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:14 Set A/D data flow result=40 04:35:14 Set A/D channel type result=40 04:35:14 Set A/D encoding result=40 04:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:14 Set channel filter=0.000000e+000 result=40 04:35:14 Config A/D Result=40 04:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:14 Get A/D filter: -9.255963e+061 result=40 04:35:14 Get A/D value=-858993460 result=40 04:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:14 Aux= 04:35:14 Message to Camera, serial 209603 queued 04:35:51 Received message from Master: op=PointingHead serial=209616 04:35:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:35:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:35:52 Point started: ret=0 04:35:52 point_skyscan result=0 [UTC 2018-12-17 04:35:52] 04:35:52 Check angles 04:35:52 SkyScan query 04:35:53 SkyScan query done: ret=0 az=85.995<-5733 ze=21.87<-10542 Statuses=0008 0009 04:35:53 Msec=0 True Az=85.995 Ze=21.87 Az status=0008 Ze status=0009 04:35:53 Check angles 04:35:53 SkyScan query 04:35:54 SkyScan query done: ret=0 az=85.995<-5733 ze=0.495<-11967 Statuses=0008 0009 04:35:54 Msec=750 True Az=85.995 Ze=0.495 Az status=0008 Ze status=0009 04:35:54 Check angles 04:35:54 SkyScan query 04:35:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.88<-13392 Statuses=0008 0009 04:35:55 Msec=1500 True Az=85.995 Ze=-20.88 Az status=0008 Ze status=0009 04:35:55 Check angles 04:35:55 SkyScan query 04:35:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.82<-14788 Statuses=0008 0009 04:35:55 Msec=2250 True Az=85.995 Ze=-41.82 Az status=0008 Ze status=0009 04:35:55 Check angles 04:35:55 SkyScan query 04:35:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:35:56 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:35:56 Message to Master queued w/err=0: serial=209616 error=0 04:36:01 Received message from Master: op=Filter serial=209617 04:36:01 Color wheel filter change from 0 to 0 04:36:01 FLIGetFilterPos err=0 currentPosition=0 04:36:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:01 Filter is already there-color wheel unchanged 04:36:01 Received message from Master: op=Shutter serial=209618 04:36:01 Shutter LASER close 04:36:01 Received message from Camera: op=State serial=209620 04:36:01 GetSingleValue result=40 Value=cccccccc 04:36:01 SkyScan query 04:36:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:36:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:02 Parameters OK 04:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:02 Set A/D data flow result=40 04:36:02 Set A/D channel type result=40 04:36:02 Set A/D encoding result=40 04:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:02 Set channel filter=0.000000e+000 result=40 04:36:02 Config A/D Result=40 04:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:02 Get A/D filter: -9.255963e+061 result=40 04:36:02 Get A/D value=-858993460 result=40 04:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:02 Parameters OK 04:36:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:02 Set A/D data flow result=40 04:36:02 Set A/D channel type result=40 04:36:02 Set A/D encoding result=40 04:36:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:02 Set channel filter=0.000000e+000 result=40 04:36:02 Config A/D Result=40 04:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:02 Get A/D filter: -9.255963e+061 result=40 04:36:02 Get A/D value=-858993460 result=40 04:36:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:02 Aux= 04:36:02 Message to Camera, serial 209620 queued 04:36:39 Received message from Master: op=PointingHead serial=209633 04:36:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:36:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:36:39 Point started: ret=0 04:36:39 point_skyscan result=0 04:36:40 Check angles 04:36:40 SkyScan query 04:36:40 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.54<-17436 Statuses=0009 0009 04:36:40 Msec=0 True Az=109.185 Ze=-81.54 Az status=0009 Ze status=0009 04:36:41 Check angles 04:36:41 SkyScan query 04:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 04:36:41 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 04:36:41 Check angles 04:36:41 SkyScan query 04:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 04:36:42 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 04:36:42 Check angles 04:36:42 SkyScan query 04:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 04:36:43 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 04:36:43 Check angles 04:36:43 SkyScan query 04:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 04:36:43 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 04:36:44 Check angles 04:36:44 SkyScan query 04:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:36:44 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:36:44 Message to Master queued w/err=0: serial=209633 error=0 04:36:49 Received message from Master: op=Filter serial=209634 04:36:49 Color wheel filter change from 0 to 0 04:36:49 FLIGetFilterPos err=0 currentPosition=0 04:36:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:49 Filter is already there-color wheel unchanged 04:36:49 Received message from Master: op=Shutter serial=209635 04:36:49 Shutter LASER open 04:36:49 Received message from Camera: op=State serial=209637 04:36:49 GetSingleValue result=40 Value=cccccccc 04:36:49 SkyScan query 04:36:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:36:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:50 Parameters OK 04:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:50 Set A/D data flow result=40 04:36:50 Set A/D channel type result=40 04:36:50 Set A/D encoding result=40 04:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:50 Set channel filter=0.000000e+000 result=40 04:36:50 Config A/D Result=40 04:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:50 Get A/D filter: -9.255963e+061 result=40 04:36:50 Get A/D value=-858993460 result=40 04:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:50 Parameters OK 04:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:50 Set A/D data flow result=40 04:36:50 Set A/D channel type result=40 04:36:50 Set A/D encoding result=40 04:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:50 Set channel filter=0.000000e+000 result=40 04:36:50 Config A/D Result=40 04:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:50 Get A/D filter: -9.255963e+061 result=40 04:36:50 Get A/D value=-858993460 result=40 04:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:50 Aux= 04:36:50 Message to Camera, serial 209637 queued 04:36:58 Received message from Master: op=Shutter serial=209647 04:36:58 Shutter LASER close 04:36:59 Received message from Master: op=PointingHead serial=209651 04:36:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:36:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:36:59 Point started: ret=0 04:36:59 point_skyscan result=0 04:37:00 Check angles 04:37:00 SkyScan query 04:37:01 SkyScan query done: ret=0 az=89.865<-5991 ze=157.245<-1517 Statuses=0009 0009 04:37:01 Msec=0 True Az=89.865 Ze=157.245 Az status=0009 Ze status=0009 04:37:01 Check angles 04:37:01 SkyScan query 04:37:01 SkyScan query done: ret=0 az=72.42<-4828 ze=136.29<-2914 Statuses=0009 0009 04:37:01 Msec=750 True Az=72.42 Ze=136.29 Az status=0009 Ze status=0009 04:37:01 Check angles 04:37:01 SkyScan query 04:37:02 SkyScan query done: ret=0 az=55.08<-3672 ze=115.38<-4308 Statuses=0009 0009 04:37:02 Msec=1500 True Az=55.08 Ze=115.38 Az status=0009 Ze status=0009 04:37:02 Check angles 04:37:02 SkyScan query 04:37:03 SkyScan query done: ret=0 az=40.95<-2730 ze=94.365<-5709 Statuses=0009 0009 04:37:03 Msec=2250 True Az=40.95 Ze=94.365 Az status=0009 Ze status=0009 04:37:03 Check angles 04:37:03 SkyScan query 04:37:04 SkyScan query done: ret=0 az=40.995<-2733 ze=73.41<-7106 Statuses=0008 0009 04:37:04 Msec=3000 True Az=40.995 Ze=73.41 Az status=0008 Ze status=0009 04:37:04 Check angles 04:37:04 SkyScan query 04:37:04 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 04:37:04 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 04:37:04 Check angles 04:37:04 SkyScan query 04:37:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:37:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:37:05 Message to Master queued w/err=0: serial=209651 error=0 04:37:10 Received message from Master: op=Filter serial=209652 04:37:10 Color wheel filter change from 0 to 0 04:37:10 FLIGetFilterPos err=0 currentPosition=0 04:37:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:10 Filter is already there-color wheel unchanged 04:37:10 Received message from Master: op=Shutter serial=209653 04:37:10 Shutter LASER close 04:37:10 Received message from Camera: op=State serial=209655 04:37:10 GetSingleValue result=40 Value=cccccccc 04:37:10 SkyScan query 04:37:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:37:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:11 Parameters OK 04:37:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:11 Set A/D data flow result=40 04:37:11 Set A/D channel type result=40 04:37:11 Set A/D encoding result=40 04:37:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:11 Set channel filter=0.000000e+000 result=40 04:37:11 Config A/D Result=40 04:37:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:11 Get A/D filter: -9.255963e+061 result=40 04:37:11 Get A/D value=-858993460 result=40 04:37:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:11 Parameters OK 04:37:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:11 Set A/D data flow result=40 04:37:11 Set A/D channel type result=40 04:37:11 Set A/D encoding result=40 04:37:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:11 Set channel filter=0.000000e+000 result=40 04:37:11 Config A/D Result=40 04:37:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:11 Get A/D filter: -9.255963e+061 result=40 04:37:11 Get A/D value=-858993460 result=40 04:37:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:11 Aux= 04:37:11 Message to Camera, serial 209655 queued 04:37:48 Received message from Master: op=PointingHead serial=209668 04:37:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:37:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:37:48 Point started: ret=0 04:37:48 point_skyscan result=0 04:37:49 Check angles 04:37:49 SkyScan query 04:37:50 SkyScan query done: ret=0 az=40.995<-2733 ze=21.525<-10565 Statuses=0008 0009 04:37:50 Msec=0 True Az=40.995 Ze=21.525 Az status=0008 Ze status=0009 04:37:50 Check angles 04:37:50 SkyScan query 04:37:50 SkyScan query done: ret=0 az=41.01<-2734 ze=0.06<-11996 Statuses=0008 0009 04:37:50 Msec=750 True Az=41.01 Ze=0.06 Az status=0008 Ze status=0009 04:37:51 Check angles 04:37:51 SkyScan query 04:37:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.91<-13394 Statuses=0008 0009 04:37:51 Msec=1500 True Az=40.995 Ze=-20.91 Az status=0008 Ze status=0009 04:37:51 Check angles 04:37:51 SkyScan query 04:37:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 04:37:52 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 04:37:52 Check angles 04:37:52 SkyScan query 04:37:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:37:53 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:37:53 Message to Master queued w/err=0: serial=209668 error=0 04:37:58 Received message from Master: op=Filter serial=209669 04:37:58 Color wheel filter change from 0 to 0 04:37:58 FLIGetFilterPos err=0 currentPosition=0 04:37:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:58 Filter is already there-color wheel unchanged 04:37:58 Received message from Master: op=Shutter serial=209670 04:37:58 Shutter LASER close 04:37:58 Received message from Camera: op=State serial=209672 04:37:58 GetSingleValue result=40 Value=cccccccc 04:37:58 SkyScan query 04:37:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:37:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:59 Parameters OK 04:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:59 Set A/D data flow result=40 04:37:59 Set A/D channel type result=40 04:37:59 Set A/D encoding result=40 04:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:59 Set channel filter=0.000000e+000 result=40 04:37:59 Config A/D Result=40 04:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:59 Get A/D filter: -9.255963e+061 result=40 04:37:59 Get A/D value=-858993460 result=40 04:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:59 Parameters OK 04:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:59 Set A/D data flow result=40 04:37:59 Set A/D channel type result=40 04:37:59 Set A/D encoding result=40 04:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:59 Set channel filter=0.000000e+000 result=40 04:37:59 Config A/D Result=40 04:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:59 Get A/D filter: -9.255963e+061 result=40 04:37:59 Get A/D value=-858993460 result=40 04:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:59 Aux= 04:37:59 Message to Camera, serial 209672 queued 04:38:35 Received message from Master: op=PointingHead serial=209685 04:38:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:38:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:38:36 Point started: ret=0 04:38:36 point_skyscan result=0 04:38:36 Check angles 04:38:36 SkyScan query 04:38:37 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.265<-16551 Statuses=0009 0009 04:38:37 Msec=0 True Az=63.96 Ze=-68.265 Az status=0009 Ze status=0009 04:38:37 Check angles 04:38:37 SkyScan query 04:38:38 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.28<-17952 Statuses=0009 0009 04:38:38 Msec=750 True Az=81.345 Ze=-89.28 Az status=0009 Ze status=0009 04:38:38 Check angles 04:38:38 SkyScan query 04:38:39 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.19<-19346 Statuses=0009 0009 04:38:39 Msec=1500 True Az=98.865 Ze=-110.19 Az status=0009 Ze status=0009 04:38:39 Check angles 04:38:39 SkyScan query 04:38:39 SkyScan query done: ret=0 az=116.31<-7754 ze=-131.175<-20745 Statuses=0009 0009 04:38:39 Msec=2250 True Az=116.31 Ze=-131.175 Az status=0009 Ze status=0009 04:38:39 Check angles 04:38:39 SkyScan query 04:38:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 04:38:40 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 04:38:40 Check angles 04:38:40 SkyScan query 04:38:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:38:41 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:38:41 Message to Master queued w/err=0: serial=209685 error=0 04:38:46 Received message from Master: op=Filter serial=209686 04:38:46 Color wheel filter change from 0 to 0 04:38:46 FLIGetFilterPos err=0 currentPosition=0 04:38:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:46 Filter is already there-color wheel unchanged 04:38:46 Received message from Master: op=Shutter serial=209687 04:38:46 Shutter LASER close 04:38:46 Received message from Camera: op=State serial=209689 04:38:46 GetSingleValue result=40 Value=cccccccc 04:38:46 SkyScan query 04:38:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:38:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:47 Parameters OK 04:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:47 Set A/D data flow result=40 04:38:47 Set A/D channel type result=40 04:38:47 Set A/D encoding result=40 04:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:47 Set channel filter=0.000000e+000 result=40 04:38:47 Config A/D Result=40 04:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:47 Get A/D filter: -9.255963e+061 result=40 04:38:47 Get A/D value=-858993460 result=40 04:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:47 Parameters OK 04:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:47 Set A/D data flow result=40 04:38:47 Set A/D channel type result=40 04:38:47 Set A/D encoding result=40 04:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:47 Set channel filter=0.000000e+000 result=40 04:38:47 Config A/D Result=40 04:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:47 Get A/D filter: -9.255963e+061 result=40 04:38:47 Get A/D value=-858993460 result=40 04:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:47 Aux= 04:38:47 Message to Camera, serial 209689 queued 04:39:23 Received message from Master: op=PointingHead serial=209702 04:39:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:39:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:39:24 Point started: ret=0 04:39:24 point_skyscan result=0 04:39:24 Check angles 04:39:24 SkyScan query 04:39:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0009 0009 04:39:25 Msec=0 True Az=112.995 Ze=-171.21 Az status=0009 Ze status=0009 04:39:25 Check angles 04:39:25 SkyScan query 04:39:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:39:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:39:26 Message to Master queued w/err=0: serial=209702 error=0 04:39:31 Received message from Master: op=Filter serial=209703 04:39:31 Color wheel filter change from 0 to 0 04:39:31 FLIGetFilterPos err=0 currentPosition=0 04:39:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:31 Filter is already there-color wheel unchanged 04:39:31 Received message from Master: op=Shutter serial=209704 04:39:31 Shutter LASER open 04:39:31 Received message from Camera: op=State serial=209706 04:39:31 GetSingleValue result=40 Value=cccccccc 04:39:31 SkyScan query 04:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:39:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:32 Parameters OK 04:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:32 Set A/D data flow result=40 04:39:32 Set A/D channel type result=40 04:39:32 Set A/D encoding result=40 04:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:32 Set channel filter=0.000000e+000 result=40 04:39:32 Config A/D Result=40 04:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:32 Get A/D filter: -9.255963e+061 result=40 04:39:32 Get A/D value=-858993460 result=40 04:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:32 Parameters OK 04:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:32 Set A/D data flow result=40 04:39:32 Set A/D channel type result=40 04:39:32 Set A/D encoding result=40 04:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:32 Set channel filter=0.000000e+000 result=40 04:39:32 Config A/D Result=40 04:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:32 Get A/D filter: -9.255963e+061 result=40 04:39:32 Get A/D value=-858993460 result=40 04:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:32 Aux= 04:39:32 Message to Camera, serial 209706 queued 04:39:40 Received message from Master: op=Shutter serial=209716 04:39:40 Shutter LASER close 04:39:41 Received message from Master: op=PointingHead serial=209720 04:39:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:39:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:39:41 Point started: ret=0 04:39:41 point_skyscan result=0 04:39:42 Check angles 04:39:42 SkyScan query 04:39:43 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.95<-21530 Statuses=0009 0009 04:39:43 Msec=0 True Az=136.215 Ze=-142.95 Az status=0009 Ze status=0009 04:39:43 Check angles 04:39:43 SkyScan query 04:39:43 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.995<-20133 Statuses=0009 0009 04:39:43 Msec=750 True Az=153.765 Ze=-121.995 Az status=0009 Ze status=0009 04:39:43 Check angles 04:39:43 SkyScan query 04:39:44 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.025<-18735 Statuses=0009 0009 04:39:44 Msec=1500 True Az=171.21 Ze=-101.025 Az status=0009 Ze status=0009 04:39:44 Check angles 04:39:44 SkyScan query 04:39:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.635<-17309 Statuses=0008 0009 04:39:45 Msec=2250 True Az=175.995 Ze=-79.635 Az status=0008 Ze status=0009 04:39:45 Check angles 04:39:45 SkyScan query 04:39:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 04:39:46 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 04:39:46 Check angles 04:39:46 SkyScan query 04:39:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:39:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:39:46 Message to Master queued w/err=0: serial=209720 error=0 04:39:51 Received message from Master: op=Filter serial=209721 04:39:51 Color wheel filter change from 0 to 0 04:39:51 FLIGetFilterPos err=0 currentPosition=0 04:39:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:51 Filter is already there-color wheel unchanged 04:39:51 Received message from Master: op=Shutter serial=209722 04:39:51 Shutter LASER close 04:39:52 Received message from Camera: op=State serial=209724 04:39:52 GetSingleValue result=40 Value=cccccccc 04:39:52 SkyScan query 04:39:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:39:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:52 Parameters OK 04:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:52 Set A/D data flow result=40 04:39:52 Set A/D channel type result=40 04:39:52 Set A/D encoding result=40 04:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:52 Set channel filter=0.000000e+000 result=40 04:39:52 Config A/D Result=40 04:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:52 Get A/D filter: -9.255963e+061 result=40 04:39:52 Get A/D value=-858993460 result=40 04:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:52 Parameters OK 04:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:52 Set A/D data flow result=40 04:39:52 Set A/D channel type result=40 04:39:52 Set A/D encoding result=40 04:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:52 Set channel filter=0.000000e+000 result=40 04:39:52 Config A/D Result=40 04:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:52 Get A/D filter: -9.255963e+061 result=40 04:39:52 Get A/D value=-858993460 result=40 04:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:52 Aux= 04:39:52 Message to Camera, serial 209724 queued 04:40:29 Received message from Master: op=PointingHead serial=209737 04:40:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:40:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:40:29 Point started: ret=0 04:40:29 point_skyscan result=0 04:40:30 Check angles 04:40:30 SkyScan query 04:40:31 SkyScan query done: ret=0 az=153.195<-10213 ze=-21.99<-13466 Statuses=0009 0009 04:40:31 Msec=0 True Az=153.195 Ze=-21.99 Az status=0009 Ze status=0009 04:40:31 Check angles 04:40:31 SkyScan query 04:40:31 SkyScan query done: ret=0 az=135.78<-9052 ze=-0.99<-12066 Statuses=0009 0009 04:40:31 Msec=750 True Az=135.78 Ze=-0.99 Az status=0009 Ze status=0009 04:40:32 Check angles 04:40:32 SkyScan query 04:40:32 SkyScan query done: ret=0 az=118.215<-7881 ze=19.92<-10672 Statuses=0009 0009 04:40:32 Msec=1500 True Az=118.215 Ze=19.92 Az status=0009 Ze status=0009 04:40:32 Check angles 04:40:32 SkyScan query 04:40:33 SkyScan query done: ret=0 az=100.845<-6723 ze=40.935<-9271 Statuses=0009 0009 04:40:33 Msec=2250 True Az=100.845 Ze=40.935 Az status=0009 Ze status=0009 04:40:33 Check angles 04:40:33 SkyScan query 04:40:34 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 04:40:34 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 04:40:34 Check angles 04:40:34 SkyScan query 04:40:34 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 04:40:34 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 04:40:34 Message to Master queued w/err=0: serial=209737 error=0 04:40:39 Received message from Master: op=Filter serial=209738 04:40:39 Color wheel filter change from 0 to 0 04:40:39 FLIGetFilterPos err=0 currentPosition=0 04:40:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:39 Filter is already there-color wheel unchanged 04:40:40 Received message from Master: op=Shutter serial=209739 04:40:40 Shutter LASER close 04:40:40 Received message from Camera: op=State serial=209741 04:40:40 GetSingleValue result=40 Value=cccccccc 04:40:40 SkyScan query 04:40:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:40:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:40 Parameters OK 04:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:40 Set A/D data flow result=40 04:40:40 Set A/D channel type result=40 04:40:40 Set A/D encoding result=40 04:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:40 Set channel filter=0.000000e+000 result=40 04:40:40 Config A/D Result=40 04:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:40 Get A/D filter: -9.255963e+061 result=40 04:40:40 Get A/D value=-858993460 result=40 04:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:40 Parameters OK 04:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:40 Set A/D data flow result=40 04:40:40 Set A/D channel type result=40 04:40:40 Set A/D encoding result=40 04:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:40 Set channel filter=0.000000e+000 result=40 04:40:40 Config A/D Result=40 04:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:40 Get A/D filter: -9.255963e+061 result=40 04:40:40 Get A/D value=-858993460 result=40 04:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:40 Aux= 04:40:40 Message to Camera, serial 209741 queued 04:41:17 Received message from Master: op=PointingHead serial=209754 04:41:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:41:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:41:18 Point started: ret=0 04:41:18 point_skyscan result=0 04:41:18 Check angles 04:41:18 SkyScan query 04:41:19 SkyScan query done: ret=0 az=85.995<-5733 ze=21.585<-10561 Statuses=0008 0009 04:41:19 Msec=0 True Az=85.995 Ze=21.585 Az status=0008 Ze status=0009 04:41:19 Check angles 04:41:19 SkyScan query 04:41:20 SkyScan query done: ret=0 az=86.01<-5734 ze=0.195<-11987 Statuses=0008 0009 04:41:20 Msec=750 True Az=86.01 Ze=0.195 Az status=0008 Ze status=0009 04:41:20 Check angles 04:41:20 SkyScan query 04:41:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.165<-13411 Statuses=0008 0009 04:41:20 Msec=1500 True Az=85.995 Ze=-21.165 Az status=0008 Ze status=0009 04:41:21 Check angles 04:41:21 SkyScan query 04:41:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.135<-14809 Statuses=0008 0009 04:41:21 Msec=2250 True Az=85.995 Ze=-42.135 Az status=0008 Ze status=0009 04:41:21 Check angles 04:41:21 SkyScan query 04:41:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:41:22 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:41:22 Message to Master queued w/err=0: serial=209754 error=0 04:41:27 Received message from Master: op=Filter serial=209755 04:41:27 Color wheel filter change from 0 to 0 04:41:27 FLIGetFilterPos err=0 currentPosition=0 04:41:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:27 Filter is already there-color wheel unchanged 04:41:27 Received message from Master: op=Shutter serial=209756 04:41:27 Shutter LASER close 04:41:27 Received message from Camera: op=State serial=209758 04:41:27 GetSingleValue result=40 Value=cccccccc 04:41:27 SkyScan query 04:41:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:41:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:28 Parameters OK 04:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:28 Set A/D data flow result=40 04:41:28 Set A/D channel type result=40 04:41:28 Set A/D encoding result=40 04:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:28 Set channel filter=0.000000e+000 result=40 04:41:28 Config A/D Result=40 04:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:28 Get A/D filter: -9.255963e+061 result=40 04:41:28 Get A/D value=-858993460 result=40 04:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:28 Parameters OK 04:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:28 Set A/D data flow result=40 04:41:28 Set A/D channel type result=40 04:41:28 Set A/D encoding result=40 04:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:28 Set channel filter=0.000000e+000 result=40 04:41:28 Config A/D Result=40 04:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:28 Get A/D filter: -9.255963e+061 result=40 04:41:28 Get A/D value=-858993460 result=40 04:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:28 Aux= 04:41:28 Message to Camera, serial 209758 queued 04:42:05 Received message from Master: op=PointingHead serial=209771 04:42:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:42:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:42:05 Point started: ret=0 04:42:05 point_skyscan result=0 04:42:06 Check angles 04:42:06 SkyScan query 04:42:06 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.48<-17432 Statuses=0009 0009 04:42:06 Msec=0 True Az=109.185 Ze=-81.48 Az status=0009 Ze status=0009 04:42:06 Check angles 04:42:06 SkyScan query 04:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.84<-18856 Statuses=0008 0009 04:42:07 Msec=750 True Az=112.995 Ze=-102.84 Az status=0008 Ze status=0009 04:42:07 Check angles 04:42:07 SkyScan query 04:42:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.81<-20254 Statuses=0008 0009 04:42:08 Msec=1500 True Az=112.995 Ze=-123.81 Az status=0008 Ze status=0009 04:42:08 Check angles 04:42:08 SkyScan query 04:42:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 04:42:09 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 04:42:09 Check angles 04:42:09 SkyScan query 04:42:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.69<-23046 Statuses=0008 0009 04:42:09 Msec=3000 True Az=112.995 Ze=-165.69 Az status=0008 Ze status=0009 04:42:09 Check angles 04:42:09 SkyScan query 04:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:42:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:42:10 Message to Master queued w/err=0: serial=209771 error=0 04:42:15 Received message from Master: op=Filter serial=209772 04:42:15 Color wheel filter change from 0 to 0 04:42:15 FLIGetFilterPos err=0 currentPosition=0 04:42:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:15 Filter is already there-color wheel unchanged 04:42:15 Received message from Master: op=Shutter serial=209773 04:42:15 Shutter LASER open 04:42:15 Received message from Camera: op=State serial=209775 04:42:15 GetSingleValue result=40 Value=cccccccc 04:42:15 SkyScan query 04:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:42:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:16 Parameters OK 04:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:16 Set A/D data flow result=40 04:42:16 Set A/D channel type result=40 04:42:16 Set A/D encoding result=40 04:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:16 Set channel filter=0.000000e+000 result=40 04:42:16 Config A/D Result=40 04:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:16 Get A/D filter: -9.255963e+061 result=40 04:42:16 Get A/D value=-858993460 result=40 04:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:16 Parameters OK 04:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:16 Set A/D data flow result=40 04:42:16 Set A/D channel type result=40 04:42:16 Set A/D encoding result=40 04:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:16 Set channel filter=0.000000e+000 result=40 04:42:16 Config A/D Result=40 04:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:16 Get A/D filter: -9.255963e+061 result=40 04:42:16 Get A/D value=-858993460 result=40 04:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:16 Aux= 04:42:16 Message to Camera, serial 209775 queued 04:42:24 Received message from Master: op=Shutter serial=209785 04:42:24 Shutter LASER close 04:42:25 Received message from Master: op=PointingHead serial=209789 04:42:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:42:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:42:25 Point started: ret=0 04:42:25 point_skyscan result=0 04:42:26 Check angles 04:42:26 SkyScan query 04:42:26 SkyScan query done: ret=0 az=89.835<-5989 ze=157.275<-1515 Statuses=0009 0009 04:42:26 Msec=0 True Az=89.835 Ze=157.275 Az status=0009 Ze status=0009 04:42:27 Check angles 04:42:27 SkyScan query 04:42:27 SkyScan query done: ret=0 az=72.03<-4802 ze=135.885<-2941 Statuses=0009 0009 04:42:27 Msec=750 True Az=72.03 Ze=135.885 Az status=0009 Ze status=0009 04:42:27 Check angles 04:42:27 SkyScan query 04:42:28 SkyScan query done: ret=0 az=54.825<-3655 ze=114.915<-4339 Statuses=0009 0009 04:42:28 Msec=1500 True Az=54.825 Ze=114.915 Az status=0009 Ze status=0009 04:42:28 Check angles 04:42:28 SkyScan query 04:42:29 SkyScan query done: ret=0 az=41.025<-2735 ze=93.96<-5736 Statuses=0009 0009 04:42:29 Msec=2250 True Az=41.025 Ze=93.96 Az status=0009 Ze status=0009 04:42:29 Check angles 04:42:29 SkyScan query 04:42:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 04:42:30 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 04:42:30 Check angles 04:42:30 SkyScan query 04:42:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 04:42:30 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 04:42:30 Check angles 04:42:30 SkyScan query 04:42:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:42:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:42:31 Message to Master queued w/err=0: serial=209789 error=0 04:42:36 Received message from Master: op=Filter serial=209790 04:42:36 Color wheel filter change from 0 to 0 04:42:36 FLIGetFilterPos err=0 currentPosition=0 04:42:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:36 Filter is already there-color wheel unchanged 04:42:36 Received message from Master: op=Shutter serial=209791 04:42:36 Shutter LASER close 04:42:36 Received message from Camera: op=State serial=209793 04:42:36 GetSingleValue result=40 Value=cccccccc 04:42:36 SkyScan query 04:42:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:42:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:37 Parameters OK 04:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:37 Set A/D data flow result=40 04:42:37 Set A/D channel type result=40 04:42:37 Set A/D encoding result=40 04:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:37 Set channel filter=0.000000e+000 result=40 04:42:37 Config A/D Result=40 04:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:37 Get A/D filter: -9.255963e+061 result=40 04:42:37 Get A/D value=-858993460 result=40 04:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:37 Parameters OK 04:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:37 Set A/D data flow result=40 04:42:37 Set A/D channel type result=40 04:42:37 Set A/D encoding result=40 04:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:37 Set channel filter=0.000000e+000 result=40 04:42:37 Config A/D Result=40 04:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:37 Get A/D filter: -9.255963e+061 result=40 04:42:37 Get A/D value=-858993460 result=40 04:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:37 Aux= 04:42:37 Message to Camera, serial 209793 queued 04:43:14 Received message from Master: op=PointingHead serial=209806 04:43:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:43:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:43:14 Point started: ret=0 04:43:14 point_skyscan result=0 04:43:15 Check angles 04:43:15 SkyScan query 04:43:16 SkyScan query done: ret=0 az=40.98<-2732 ze=21.84<-10544 Statuses=0008 0009 04:43:16 Msec=0 True Az=40.98 Ze=21.84 Az status=0008 Ze status=0009 04:43:16 Check angles 04:43:16 SkyScan query 04:43:16 SkyScan query done: ret=0 az=40.98<-2732 ze=0.885<-11941 Statuses=0008 0009 04:43:16 Msec=750 True Az=40.98 Ze=0.885 Az status=0008 Ze status=0009 04:43:16 Check angles 04:43:16 SkyScan query 04:43:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.055<-13337 Statuses=0008 0009 04:43:17 Msec=1500 True Az=40.995 Ze=-20.055 Az status=0008 Ze status=0009 04:43:17 Check angles 04:43:17 SkyScan query 04:43:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 04:43:18 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 04:43:18 Check angles 04:43:18 SkyScan query 04:43:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:43:19 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:43:19 Message to Master queued w/err=0: serial=209806 error=0 04:43:24 Received message from Master: op=Filter serial=209807 04:43:24 Color wheel filter change from 0 to 0 04:43:24 FLIGetFilterPos err=0 currentPosition=0 04:43:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:24 Filter is already there-color wheel unchanged 04:43:24 Received message from Master: op=Shutter serial=209808 04:43:24 Shutter LASER close 04:43:24 Received message from Camera: op=State serial=209810 04:43:24 GetSingleValue result=40 Value=cccccccc 04:43:24 SkyScan query 04:43:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:43:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:24 Parameters OK 04:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:24 Set A/D data flow result=40 04:43:24 Set A/D channel type result=40 04:43:24 Set A/D encoding result=40 04:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:24 Set channel filter=0.000000e+000 result=40 04:43:24 Config A/D Result=40 04:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:24 Get A/D filter: -9.255963e+061 result=40 04:43:24 Get A/D value=-858993460 result=40 04:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:24 Parameters OK 04:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:24 Set A/D data flow result=40 04:43:24 Set A/D channel type result=40 04:43:24 Set A/D encoding result=40 04:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:24 Set channel filter=0.000000e+000 result=40 04:43:24 Config A/D Result=40 04:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:24 Get A/D filter: -9.255963e+061 result=40 04:43:24 Get A/D value=-858993460 result=40 04:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:24 Aux= 04:43:24 Message to Camera, serial 209810 queued 04:44:01 Received message from Master: op=PointingHead serial=209823 04:44:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:44:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:44:02 Point started: ret=0 04:44:02 point_skyscan result=0 04:44:02 Check angles 04:44:02 SkyScan query 04:44:03 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.805<-16587 Statuses=0009 0009 04:44:03 Msec=0 True Az=64.395 Ze=-68.805 Az status=0009 Ze status=0009 04:44:03 Check angles 04:44:03 SkyScan query 04:44:04 SkyScan query done: ret=0 az=82.365<-5491 ze=-90.165<-18011 Statuses=0009 0009 04:44:04 Msec=750 True Az=82.365 Ze=-90.165 Az status=0009 Ze status=0009 04:44:04 Check angles 04:44:04 SkyScan query 04:44:04 SkyScan query done: ret=0 az=99.795<-6653 ze=-111.15<-19410 Statuses=0009 0009 04:44:04 Msec=1500 True Az=99.795 Ze=-111.15 Az status=0009 Ze status=0009 04:44:05 Check angles 04:44:05 SkyScan query 04:44:05 SkyScan query done: ret=0 az=117.21<-7814 ze=-132.075<-20805 Statuses=0009 0009 04:44:05 Msec=2250 True Az=117.21 Ze=-132.075 Az status=0009 Ze status=0009 04:44:05 Check angles 04:44:05 SkyScan query 04:44:06 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 04:44:06 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 04:44:06 Check angles 04:44:06 SkyScan query 04:44:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:44:07 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:44:07 Message to Master queued w/err=0: serial=209823 error=0 04:44:12 Received message from Master: op=Filter serial=209824 04:44:12 Color wheel filter change from 0 to 0 04:44:12 FLIGetFilterPos err=0 currentPosition=0 04:44:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:12 Filter is already there-color wheel unchanged 04:44:12 Received message from Master: op=Shutter serial=209825 04:44:12 Shutter LASER close 04:44:12 Received message from Camera: op=State serial=209827 04:44:12 GetSingleValue result=40 Value=cccccccc 04:44:12 SkyScan query 04:44:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:44:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:13 Parameters OK 04:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:13 Set A/D data flow result=40 04:44:13 Set A/D channel type result=40 04:44:13 Set A/D encoding result=40 04:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:13 Set channel filter=0.000000e+000 result=40 04:44:13 Config A/D Result=40 04:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:13 Get A/D filter: -9.255963e+061 result=40 04:44:13 Get A/D value=-858993460 result=40 04:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:13 Parameters OK 04:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:13 Set A/D data flow result=40 04:44:13 Set A/D channel type result=40 04:44:13 Set A/D encoding result=40 04:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:13 Set channel filter=0.000000e+000 result=40 04:44:13 Config A/D Result=40 04:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:13 Get A/D filter: -9.255963e+061 result=40 04:44:13 Get A/D value=-858993460 result=40 04:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:13 Aux= 04:44:13 Message to Camera, serial 209827 queued 04:44:49 Received message from Master: op=PointingHead serial=209840 04:44:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:44:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:44:50 Point started: ret=0 04:44:50 point_skyscan result=0 04:44:50 Check angles 04:44:50 SkyScan query 04:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0008 0009 04:44:51 Msec=0 True Az=112.995 Ze=-171.51 Az status=0008 Ze status=0009 04:44:51 Check angles 04:44:51 SkyScan query 04:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:44:52 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:44:52 Message to Master queued w/err=0: serial=209840 error=0 04:44:57 Received message from Master: op=Filter serial=209841 04:44:57 Color wheel filter change from 0 to 0 04:44:57 FLIGetFilterPos err=0 currentPosition=0 04:44:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:57 Filter is already there-color wheel unchanged 04:44:57 Received message from Master: op=Shutter serial=209842 04:44:57 Shutter LASER open 04:44:57 Received message from Camera: op=State serial=209844 04:44:57 GetSingleValue result=40 Value=cccccccc 04:44:57 SkyScan query 04:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:44:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:58 Parameters OK 04:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:58 Set A/D data flow result=40 04:44:58 Set A/D channel type result=40 04:44:58 Set A/D encoding result=40 04:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:58 Set channel filter=0.000000e+000 result=40 04:44:58 Config A/D Result=40 04:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:58 Get A/D filter: -9.255963e+061 result=40 04:44:58 Get A/D value=-858993460 result=40 04:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:58 Parameters OK 04:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:58 Set A/D data flow result=40 04:44:58 Set A/D channel type result=40 04:44:58 Set A/D encoding result=40 04:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:58 Set channel filter=0.000000e+000 result=40 04:44:58 Config A/D Result=40 04:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:58 Get A/D filter: -9.255963e+061 result=40 04:44:58 Get A/D value=-858993460 result=40 04:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:58 Aux= 04:44:58 Message to Camera, serial 209844 queued 04:45:06 Received message from Master: op=Shutter serial=209854 04:45:06 Shutter LASER close 04:45:07 Received message from Master: op=PointingHead serial=209858 04:45:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:45:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:45:07 Point started: ret=0 04:45:07 point_skyscan result=0 04:45:08 Check angles 04:45:08 SkyScan query 04:45:08 SkyScan query done: ret=0 az=135.87<-9058 ze=-143.43<-21562 Statuses=0009 0009 04:45:08 Msec=0 True Az=135.87 Ze=-143.43 Az status=0009 Ze status=0009 04:45:09 Check angles 04:45:09 SkyScan query 04:45:09 SkyScan query done: ret=0 az=153.285<-10219 ze=-122.445<-20163 Statuses=0009 0009 04:45:09 Msec=750 True Az=153.285 Ze=-122.445 Az status=0009 Ze status=0009 04:45:09 Check angles 04:45:09 SkyScan query 04:45:10 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.565<-18771 Statuses=0009 0009 04:45:10 Msec=1500 True Az=170.835 Ze=-101.565 Az status=0009 Ze status=0009 04:45:10 Check angles 04:45:10 SkyScan query 04:45:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.535<-17369 Statuses=0008 0009 04:45:11 Msec=2250 True Az=175.995 Ze=-80.535 Az status=0008 Ze status=0009 04:45:11 Check angles 04:45:11 SkyScan query 04:45:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.58<-15972 Statuses=0008 0009 04:45:11 Msec=3000 True Az=175.995 Ze=-59.58 Az status=0008 Ze status=0009 04:45:12 Check angles 04:45:12 SkyScan query 04:45:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:45:12 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:45:12 Message to Master queued w/err=0: serial=209858 error=0 04:45:17 Received message from Master: op=Filter serial=209859 04:45:17 Color wheel filter change from 0 to 0 04:45:17 FLIGetFilterPos err=0 currentPosition=0 04:45:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:17 Filter is already there-color wheel unchanged 04:45:17 Received message from Master: op=Shutter serial=209860 04:45:17 Shutter LASER close 04:45:17 Received message from Camera: op=State serial=209862 04:45:17 GetSingleValue result=40 Value=cccccccc 04:45:17 SkyScan query 04:45:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:45:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2018-12-17 04:45:18] 04:45:18 Parameters OK 04:45:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:18 Set A/D data flow result=40 04:45:18 Set A/D channel type result=40 04:45:18 Set A/D encoding result=40 04:45:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:18 Set channel filter=0.000000e+000 result=40 04:45:18 Config A/D Result=40 04:45:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:18 Get A/D filter: -9.255963e+061 result=40 04:45:18 Get A/D value=-858993460 result=40 04:45:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:18 Parameters OK 04:45:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:18 Set A/D data flow result=40 04:45:18 Set A/D channel type result=40 04:45:18 Set A/D encoding result=40 04:45:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:18 Set channel filter=0.000000e+000 result=40 04:45:18 Config A/D Result=40 04:45:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:18 Get A/D filter: -9.255963e+061 result=40 04:45:18 Get A/D value=-858993460 result=40 04:45:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:18 Aux= 04:45:18 Message to Camera, serial 209862 queued 04:45:27 Received message from Master: op=Identify serial=209863 04:45:55 Received message from Master: op=PointingHead serial=209878 04:45:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:45:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:45:55 Point started: ret=0 04:45:55 point_skyscan result=0 04:45:56 Check angles 04:45:56 SkyScan query 04:45:57 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.765<-13451 Statuses=0009 0009 04:45:57 Msec=0 True Az=152.94 Ze=-21.765 Az status=0009 Ze status=0009 04:45:57 Check angles 04:45:57 SkyScan query 04:45:57 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.765<-12051 Statuses=0009 0009 04:45:57 Msec=750 True Az=135.39 Ze=-0.765 Az status=0009 Ze status=0009 04:45:57 Check angles 04:45:57 SkyScan query 04:45:58 SkyScan query done: ret=0 az=117.915<-7861 ze=20.16<-10656 Statuses=0009 0009 04:45:58 Msec=1500 True Az=117.915 Ze=20.16 Az status=0009 Ze status=0009 04:45:58 Check angles 04:45:58 SkyScan query 04:45:59 SkyScan query done: ret=0 az=100.56<-6704 ze=41.16<-9256 Statuses=0009 0009 04:45:59 Msec=2250 True Az=100.56 Ze=41.16 Az status=0009 Ze status=0009 04:45:59 Check angles 04:45:59 SkyScan query 04:46:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.585<-8561 Statuses=0009 0008 04:46:00 Msec=3000 True Az=85.995 Ze=51.585 Az status=0009 Ze status=0008 04:46:00 Check angles 04:46:00 SkyScan query 04:46:00 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 04:46:00 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 04:46:00 Message to Master queued w/err=0: serial=209878 error=0 04:46:05 Received message from Master: op=Filter serial=209879 04:46:05 Color wheel filter change from 0 to 0 04:46:05 FLIGetFilterPos err=0 currentPosition=0 04:46:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:05 Filter is already there-color wheel unchanged 04:46:05 Received message from Master: op=Shutter serial=209880 04:46:05 Shutter LASER close 04:46:06 Received message from Camera: op=State serial=209882 04:46:06 GetSingleValue result=40 Value=cccccccc 04:46:06 SkyScan query 04:46:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:46:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:06 Parameters OK 04:46:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:06 Set A/D data flow result=40 04:46:06 Set A/D channel type result=40 04:46:06 Set A/D encoding result=40 04:46:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:06 Set channel filter=0.000000e+000 result=40 04:46:06 Config A/D Result=40 04:46:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:06 Get A/D filter: -9.255963e+061 result=40 04:46:06 Get A/D value=-858993460 result=40 04:46:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:06 Parameters OK 04:46:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:06 Set A/D data flow result=40 04:46:06 Set A/D channel type result=40 04:46:06 Set A/D encoding result=40 04:46:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:06 Set channel filter=0.000000e+000 result=40 04:46:06 Config A/D Result=40 04:46:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:06 Get A/D filter: -9.255963e+061 result=40 04:46:06 Get A/D value=-858993460 result=40 04:46:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:06 Aux= 04:46:06 Message to Camera, serial 209882 queued 04:46:43 Received message from Master: op=PointingHead serial=209895 04:46:43 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:46:43 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:46:43 Point started: ret=0 04:46:43 point_skyscan result=0 04:46:44 Check angles 04:46:44 SkyScan query 04:46:45 SkyScan query done: ret=0 az=85.995<-5733 ze=21.27<-10582 Statuses=0008 0009 04:46:45 Msec=0 True Az=85.995 Ze=21.27 Az status=0008 Ze status=0009 04:46:45 Check angles 04:46:45 SkyScan query 04:46:45 SkyScan query done: ret=0 az=85.995<-5733 ze=0.33<-11978 Statuses=0008 0009 04:46:45 Msec=750 True Az=85.995 Ze=0.33 Az status=0008 Ze status=0009 04:46:46 Check angles 04:46:46 SkyScan query 04:46:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.625<-13375 Statuses=0008 0009 04:46:46 Msec=1500 True Az=85.995 Ze=-20.625 Az status=0008 Ze status=0009 04:46:46 Check angles 04:46:46 SkyScan query 04:46:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.97<-14798 Statuses=0008 0009 04:46:47 Msec=2250 True Az=85.995 Ze=-41.97 Az status=0008 Ze status=0009 04:46:47 Check angles 04:46:47 SkyScan query 04:46:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:46:48 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:46:48 Message to Master queued w/err=0: serial=209895 error=0 04:46:53 Received message from Master: op=Filter serial=209896 04:46:53 Color wheel filter change from 0 to 0 04:46:53 FLIGetFilterPos err=0 currentPosition=0 04:46:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:53 Filter is already there-color wheel unchanged 04:46:53 Received message from Master: op=Shutter serial=209897 04:46:53 Shutter LASER close 04:46:53 Received message from Camera: op=State serial=209899 04:46:53 GetSingleValue result=40 Value=cccccccc 04:46:53 SkyScan query 04:46:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:46:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:54 Parameters OK 04:46:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:54 Set A/D data flow result=40 04:46:54 Set A/D channel type result=40 04:46:54 Set A/D encoding result=40 04:46:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:54 Set channel filter=0.000000e+000 result=40 04:46:54 Config A/D Result=40 04:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:54 Get A/D filter: -9.255963e+061 result=40 04:46:54 Get A/D value=-858993460 result=40 04:46:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:54 Parameters OK 04:46:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:54 Set A/D data flow result=40 04:46:54 Set A/D channel type result=40 04:46:54 Set A/D encoding result=40 04:46:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:54 Set channel filter=0.000000e+000 result=40 04:46:54 Config A/D Result=40 04:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:54 Get A/D filter: -9.255963e+061 result=40 04:46:54 Get A/D value=-858993460 result=40 04:46:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:54 Aux= 04:46:54 Message to Camera, serial 209899 queued 04:47:30 Received message from Master: op=PointingHead serial=209912 04:47:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:47:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:47:31 Point started: ret=0 04:47:31 point_skyscan result=0 04:47:31 Check angles 04:47:31 SkyScan query 04:47:32 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.21<-17414 Statuses=0009 0009 04:47:32 Msec=0 True Az=108.915 Ze=-81.21 Az status=0009 Ze status=0009 04:47:32 Check angles 04:47:32 SkyScan query 04:47:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 04:47:33 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 04:47:33 Check angles 04:47:33 SkyScan query 04:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.12<-20208 Statuses=0008 0009 04:47:34 Msec=1500 True Az=112.995 Ze=-123.12 Az status=0008 Ze status=0009 04:47:34 Check angles 04:47:34 SkyScan query 04:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.075<-21605 Statuses=0008 0009 04:47:34 Msec=2250 True Az=112.995 Ze=-144.075 Az status=0008 Ze status=0009 04:47:34 Check angles 04:47:34 SkyScan query 04:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.045<-23003 Statuses=0008 0009 04:47:35 Msec=3000 True Az=112.995 Ze=-165.045 Az status=0008 Ze status=0009 04:47:35 Check angles 04:47:35 SkyScan query 04:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:47:36 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:47:36 Message to Master queued w/err=0: serial=209912 error=0 04:47:41 Received message from Master: op=Filter serial=209913 04:47:41 Color wheel filter change from 0 to 0 04:47:41 FLIGetFilterPos err=0 currentPosition=0 04:47:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:41 Filter is already there-color wheel unchanged 04:47:41 Received message from Master: op=Shutter serial=209914 04:47:41 Shutter LASER open 04:47:41 Received message from Camera: op=State serial=209916 04:47:41 GetSingleValue result=40 Value=cccccccc 04:47:41 SkyScan query 04:47:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:47:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:42 Parameters OK 04:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:42 Set A/D data flow result=40 04:47:42 Set A/D channel type result=40 04:47:42 Set A/D encoding result=40 04:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:42 Set channel filter=0.000000e+000 result=40 04:47:42 Config A/D Result=40 04:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:42 Get A/D filter: -9.255963e+061 result=40 04:47:42 Get A/D value=-858993460 result=40 04:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:42 Parameters OK 04:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:42 Set A/D data flow result=40 04:47:42 Set A/D channel type result=40 04:47:42 Set A/D encoding result=40 04:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:42 Set channel filter=0.000000e+000 result=40 04:47:42 Config A/D Result=40 04:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:42 Get A/D filter: -9.255963e+061 result=40 04:47:42 Get A/D value=-858993460 result=40 04:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:42 Aux= 04:47:42 Message to Camera, serial 209916 queued 04:47:49 Received message from Master: op=Shutter serial=209925 04:47:49 Shutter LASER close 04:47:50 Received message from Master: op=PointingHead serial=209929 04:47:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:47:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:47:50 Point started: ret=0 04:47:50 point_skyscan result=0 04:47:51 Check angles 04:47:51 SkyScan query 04:47:51 SkyScan query done: ret=0 az=89.43<-5962 ze=156.855<-1543 Statuses=0009 0009 04:47:51 Msec=0 True Az=89.43 Ze=156.855 Az status=0009 Ze status=0009 04:47:52 Check angles 04:47:52 SkyScan query 04:47:52 SkyScan query done: ret=0 az=71.94<-4796 ze=135.915<-2939 Statuses=0009 0009 04:47:52 Msec=750 True Az=71.94 Ze=135.915 Az status=0009 Ze status=0009 04:47:52 Check angles 04:47:52 SkyScan query 04:47:53 SkyScan query done: ret=0 az=54.195<-3613 ze=114.465<-4369 Statuses=0009 0009 04:47:53 Msec=1500 True Az=54.195 Ze=114.465 Az status=0009 Ze status=0009 04:47:53 Check angles 04:47:53 SkyScan query 04:47:54 SkyScan query done: ret=0 az=41.01<-2734 ze=93.555<-5763 Statuses=0009 0009 04:47:54 Msec=2250 True Az=41.01 Ze=93.555 Az status=0009 Ze status=0009 04:47:54 Check angles 04:47:54 SkyScan query 04:47:54 SkyScan query done: ret=0 az=40.98<-2732 ze=72.555<-7163 Statuses=0008 0009 04:47:54 Msec=3000 True Az=40.98 Ze=72.555 Az status=0008 Ze status=0009 04:47:55 Check angles 04:47:55 SkyScan query 04:47:55 SkyScan query done: ret=0 az=40.98<-2732 ze=52.32<-8512 Statuses=0008 0009 04:47:55 Msec=3750 True Az=40.98 Ze=52.32 Az status=0008 Ze status=0009 04:47:55 Check angles 04:47:55 SkyScan query 04:47:56 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 04:47:56 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 04:47:56 Message to Master queued w/err=0: serial=209929 error=0 04:48:01 Received message from Master: op=Filter serial=209930 04:48:01 Color wheel filter change from 0 to 0 04:48:01 FLIGetFilterPos err=0 currentPosition=0 04:48:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:01 Filter is already there-color wheel unchanged 04:48:01 Received message from Master: op=Shutter serial=209931 04:48:01 Shutter LASER close 04:48:01 Received message from Camera: op=State serial=209933 04:48:01 GetSingleValue result=40 Value=cccccccc 04:48:01 SkyScan query 04:48:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:48:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:02 Parameters OK 04:48:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:02 Set A/D data flow result=40 04:48:02 Set A/D channel type result=40 04:48:02 Set A/D encoding result=40 04:48:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:02 Set channel filter=0.000000e+000 result=40 04:48:02 Config A/D Result=40 04:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:02 Get A/D filter: -9.255963e+061 result=40 04:48:02 Get A/D value=-858993460 result=40 04:48:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:02 Parameters OK 04:48:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:02 Set A/D data flow result=40 04:48:02 Set A/D channel type result=40 04:48:02 Set A/D encoding result=40 04:48:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:02 Set channel filter=0.000000e+000 result=40 04:48:02 Config A/D Result=40 04:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:02 Get A/D filter: -9.255963e+061 result=40 04:48:02 Get A/D value=-858993460 result=40 04:48:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:02 Aux= 04:48:02 Message to Camera, serial 209933 queued 04:48:39 Received message from Master: op=PointingHead serial=209946 04:48:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:48:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:48:39 Point started: ret=0 04:48:39 point_skyscan result=0 04:48:40 Check angles 04:48:40 SkyScan query 04:48:40 SkyScan query done: ret=0 az=40.995<-2733 ze=21.33<-10578 Statuses=0008 0009 04:48:40 Msec=0 True Az=40.995 Ze=21.33 Az status=0008 Ze status=0009 04:48:41 Check angles 04:48:41 SkyScan query 04:48:41 SkyScan query done: ret=0 az=41.01<-2734 ze=0.33<-11978 Statuses=0008 0009 04:48:41 Msec=750 True Az=41.01 Ze=0.33 Az status=0008 Ze status=0009 04:48:41 Check angles 04:48:41 SkyScan query 04:48:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.61<-13374 Statuses=0008 0009 04:48:42 Msec=1500 True Az=40.995 Ze=-20.61 Az status=0008 Ze status=0009 04:48:42 Check angles 04:48:42 SkyScan query 04:48:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 04:48:43 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 04:48:43 Check angles 04:48:43 SkyScan query 04:48:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:48:43 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:48:43 Message to Master queued w/err=0: serial=209946 error=0 04:48:48 Received message from Master: op=Filter serial=209947 04:48:48 Color wheel filter change from 0 to 0 04:48:48 FLIGetFilterPos err=0 currentPosition=0 04:48:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:48 Filter is already there-color wheel unchanged 04:48:49 Received message from Master: op=Shutter serial=209948 04:48:49 Shutter LASER close 04:48:49 Received message from Camera: op=State serial=209950 04:48:49 GetSingleValue result=40 Value=cccccccc 04:48:49 SkyScan query 04:48:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:48:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:49 Parameters OK 04:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:49 Set A/D data flow result=40 04:48:49 Set A/D channel type result=40 04:48:49 Set A/D encoding result=40 04:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:49 Set channel filter=0.000000e+000 result=40 04:48:49 Config A/D Result=40 04:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:49 Get A/D filter: -9.255963e+061 result=40 04:48:49 Get A/D value=-858993460 result=40 04:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:49 Parameters OK 04:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:49 Set A/D data flow result=40 04:48:49 Set A/D channel type result=40 04:48:49 Set A/D encoding result=40 04:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:49 Set channel filter=0.000000e+000 result=40 04:48:49 Config A/D Result=40 04:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:49 Get A/D filter: -9.255963e+061 result=40 04:48:49 Get A/D value=-858993460 result=40 04:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:49 Aux= 04:48:49 Message to Camera, serial 209950 queued 04:49:26 Received message from Master: op=PointingHead serial=209963 04:49:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:49:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:49:26 Point started: ret=0 04:49:26 point_skyscan result=0 04:49:27 Check angles 04:49:27 SkyScan query 04:49:28 SkyScan query done: ret=0 az=64.305<-4287 ze=-68.64<-16576 Statuses=0009 0009 04:49:28 Msec=0 True Az=64.305 Ze=-68.64 Az status=0009 Ze status=0009 04:49:28 Check angles 04:49:28 SkyScan query 04:49:29 SkyScan query done: ret=0 az=81.75<-5450 ze=-89.61<-17974 Statuses=0009 0009 04:49:29 Msec=750 True Az=81.75 Ze=-89.61 Az status=0009 Ze status=0009 04:49:29 Check angles 04:49:29 SkyScan query 04:49:29 SkyScan query done: ret=0 az=99.3<-6620 ze=-110.595<-19373 Statuses=0009 0009 04:49:29 Msec=1500 True Az=99.3 Ze=-110.595 Az status=0009 Ze status=0009 04:49:29 Check angles 04:49:29 SkyScan query 04:49:30 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.505<-20767 Statuses=0009 0009 04:49:30 Msec=2250 True Az=116.805 Ze=-131.505 Az status=0009 Ze status=0009 04:49:30 Check angles 04:49:30 SkyScan query 04:49:31 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 04:49:31 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 04:49:31 Check angles 04:49:31 SkyScan query 04:49:32 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:49:32 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:49:32 Message to Master queued w/err=0: serial=209963 error=0 04:49:37 Received message from Master: op=Filter serial=209964 04:49:37 Color wheel filter change from 0 to 0 04:49:37 FLIGetFilterPos err=0 currentPosition=0 04:49:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:37 Filter is already there-color wheel unchanged 04:49:37 Received message from Master: op=Shutter serial=209965 04:49:37 Shutter LASER close 04:49:37 Received message from Camera: op=State serial=209967 04:49:37 GetSingleValue result=40 Value=cccccccc 04:49:37 SkyScan query 04:49:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:49:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:37 Parameters OK 04:49:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:37 Set A/D data flow result=40 04:49:37 Set A/D channel type result=40 04:49:37 Set A/D encoding result=40 04:49:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:37 Set channel filter=0.000000e+000 result=40 04:49:37 Config A/D Result=40 04:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:37 Get A/D filter: -9.255963e+061 result=40 04:49:37 Get A/D value=-858993460 result=40 04:49:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:37 Parameters OK 04:49:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:37 Set A/D data flow result=40 04:49:37 Set A/D channel type result=40 04:49:37 Set A/D encoding result=40 04:49:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:37 Set channel filter=0.000000e+000 result=40 04:49:37 Config A/D Result=40 04:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:37 Get A/D filter: -9.255963e+061 result=40 04:49:37 Get A/D value=-858993460 result=40 04:49:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:37 Aux= 04:49:37 Message to Camera, serial 209967 queued 04:50:14 Received message from Master: op=PointingHead serial=209980 04:50:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:50:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:50:14 Point started: ret=0 04:50:14 point_skyscan result=0 04:50:15 Check angles 04:50:15 SkyScan query 04:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.33<-23422 Statuses=0009 0009 04:50:16 Msec=0 True Az=112.995 Ze=-171.33 Az status=0009 Ze status=0009 04:50:16 Check angles 04:50:16 SkyScan query 04:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:50:17 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:50:17 Message to Master queued w/err=0: serial=209980 error=0 04:50:22 Received message from Master: op=Filter serial=209981 04:50:22 Color wheel filter change from 0 to 0 04:50:22 FLIGetFilterPos err=0 currentPosition=0 04:50:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:22 Filter is already there-color wheel unchanged 04:50:22 Received message from Master: op=Shutter serial=209982 04:50:22 Shutter LASER open 04:50:22 Received message from Camera: op=State serial=209984 04:50:22 GetSingleValue result=40 Value=cccccccc 04:50:22 SkyScan query 04:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:50:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:22 Parameters OK 04:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:22 Set A/D data flow result=40 04:50:22 Set A/D channel type result=40 04:50:22 Set A/D encoding result=40 04:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:22 Set channel filter=0.000000e+000 result=40 04:50:22 Config A/D Result=40 04:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:22 Get A/D filter: -9.255963e+061 result=40 04:50:22 Get A/D value=-858993460 result=40 04:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:22 Parameters OK 04:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:22 Set A/D data flow result=40 04:50:22 Set A/D channel type result=40 04:50:22 Set A/D encoding result=40 04:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:22 Set channel filter=0.000000e+000 result=40 04:50:22 Config A/D Result=40 04:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:22 Get A/D filter: -9.255963e+061 result=40 04:50:22 Get A/D value=-858993460 result=40 04:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:22 Aux= 04:50:22 Message to Camera, serial 209984 queued 04:50:31 Received message from Master: op=Shutter serial=209994 04:50:31 Shutter LASER close 04:50:32 Received message from Master: op=PointingHead serial=209998 04:50:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:50:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:50:32 Point started: ret=0 04:50:32 point_skyscan result=0 04:50:33 Check angles 04:50:33 SkyScan query 04:50:33 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.1<-21540 Statuses=0009 0009 04:50:33 Msec=0 True Az=136.155 Ze=-143.1 Az status=0009 Ze status=0009 04:50:33 Check angles 04:50:33 SkyScan query 04:50:34 SkyScan query done: ret=0 az=153.945<-10263 ze=-121.725<-20115 Statuses=0009 0009 04:50:34 Msec=750 True Az=153.945 Ze=-121.725 Az status=0009 Ze status=0009 04:50:34 Check angles 04:50:34 SkyScan query 04:50:35 SkyScan query done: ret=0 az=171.84<-11456 ze=-100.245<-18683 Statuses=0009 0009 04:50:35 Msec=1500 True Az=171.84 Ze=-100.245 Az status=0009 Ze status=0009 04:50:35 Check angles 04:50:35 SkyScan query 04:50:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.335<-17289 Statuses=0008 0009 04:50:35 Msec=2250 True Az=175.995 Ze=-79.335 Az status=0008 Ze status=0009 04:50:36 Check angles 04:50:36 SkyScan query 04:50:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.38<-15892 Statuses=0008 0009 04:50:36 Msec=3000 True Az=176.01 Ze=-58.38 Az status=0008 Ze status=0009 04:50:36 Check angles 04:50:36 SkyScan query 04:50:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:50:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:50:37 Message to Master queued w/err=0: serial=209998 error=0 04:50:42 Received message from Master: op=Filter serial=209999 04:50:42 Color wheel filter change from 0 to 0 04:50:42 FLIGetFilterPos err=0 currentPosition=0 04:50:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:42 Filter is already there-color wheel unchanged 04:50:42 Received message from Master: op=Shutter serial=210000 04:50:42 Shutter LASER close 04:50:42 Received message from Camera: op=State serial=210002 04:50:42 GetSingleValue result=40 Value=cccccccc 04:50:42 SkyScan query 04:50:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:50:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:43 Parameters OK 04:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:43 Set A/D data flow result=40 04:50:43 Set A/D channel type result=40 04:50:43 Set A/D encoding result=40 04:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:43 Set channel filter=0.000000e+000 result=40 04:50:43 Config A/D Result=40 04:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:43 Get A/D filter: -9.255963e+061 result=40 04:50:43 Get A/D value=-858993460 result=40 04:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:43 Parameters OK 04:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:43 Set A/D data flow result=40 04:50:43 Set A/D channel type result=40 04:50:43 Set A/D encoding result=40 04:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:43 Set channel filter=0.000000e+000 result=40 04:50:43 Config A/D Result=40 04:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:43 Get A/D filter: -9.255963e+061 result=40 04:50:43 Get A/D value=-858993460 result=40 04:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:43 Aux= 04:50:43 Message to Camera, serial 210002 queued 04:51:20 Received message from Master: op=PointingHead serial=210015 04:51:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:51:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:51:20 Point started: ret=0 04:51:20 point_skyscan result=0 04:51:21 Check angles 04:51:21 SkyScan query 04:51:21 SkyScan query done: ret=0 az=152.64<-10176 ze=-21.27<-13418 Statuses=0009 0009 04:51:21 Msec=0 True Az=152.64 Ze=-21.27 Az status=0009 Ze status=0009 04:51:22 Check angles 04:51:22 SkyScan query 04:51:22 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.375<-12025 Statuses=0009 0009 04:51:22 Msec=750 True Az=135.09 Ze=-0.375 Az status=0009 Ze status=0009 04:51:22 Check angles 04:51:22 SkyScan query 04:51:23 SkyScan query done: ret=0 az=117.555<-7837 ze=20.61<-10626 Statuses=0009 0009 04:51:23 Msec=1500 True Az=117.555 Ze=20.61 Az status=0009 Ze status=0009 04:51:23 Check angles 04:51:23 SkyScan query 04:51:24 SkyScan query done: ret=0 az=100.29<-6686 ze=41.55<-9230 Statuses=0009 0009 04:51:24 Msec=2250 True Az=100.29 Ze=41.55 Az status=0009 Ze status=0009 04:51:24 Check angles 04:51:24 SkyScan query 04:51:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 04:51:24 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 04:51:25 Check angles 04:51:25 SkyScan query 04:51:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:51:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:51:25 Message to Master queued w/err=0: serial=210015 error=0 04:51:30 Received message from Master: op=Filter serial=210016 04:51:30 Color wheel filter change from 0 to 0 04:51:30 FLIGetFilterPos err=0 currentPosition=0 04:51:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:30 Filter is already there-color wheel unchanged 04:51:30 Received message from Master: op=Shutter serial=210017 04:51:30 Shutter LASER close 04:51:30 Received message from Camera: op=State serial=210019 04:51:30 GetSingleValue result=40 Value=cccccccc 04:51:30 SkyScan query 04:51:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:51:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:31 Parameters OK 04:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:31 Set A/D data flow result=40 04:51:31 Set A/D channel type result=40 04:51:31 Set A/D encoding result=40 04:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:31 Set channel filter=0.000000e+000 result=40 04:51:31 Config A/D Result=40 04:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:31 Get A/D filter: -9.255963e+061 result=40 04:51:31 Get A/D value=-858993460 result=40 04:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:31 Parameters OK 04:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:31 Set A/D data flow result=40 04:51:31 Set A/D channel type result=40 04:51:31 Set A/D encoding result=40 04:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:31 Set channel filter=0.000000e+000 result=40 04:51:31 Config A/D Result=40 04:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:31 Get A/D filter: -9.255963e+061 result=40 04:51:31 Get A/D value=-858993460 result=40 04:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:31 Aux= 04:51:31 Message to Camera, serial 210019 queued 04:52:08 Received message from Master: op=PointingHead serial=210032 04:52:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:52:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:52:08 Point started: ret=0 04:52:08 point_skyscan result=0 04:52:09 Check angles 04:52:09 SkyScan query 04:52:10 SkyScan query done: ret=0 az=85.995<-5733 ze=21.765<-10549 Statuses=0008 0009 04:52:10 Msec=0 True Az=85.995 Ze=21.765 Az status=0008 Ze status=0009 04:52:10 Check angles 04:52:10 SkyScan query 04:52:10 SkyScan query done: ret=0 az=85.995<-5733 ze=0.405<-11973 Statuses=0008 0009 04:52:10 Msec=750 True Az=85.995 Ze=0.405 Az status=0008 Ze status=0009 04:52:11 Check angles 04:52:11 SkyScan query 04:52:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.55<-13370 Statuses=0008 0009 04:52:11 Msec=1500 True Az=85.995 Ze=-20.55 Az status=0008 Ze status=0009 04:52:11 Check angles 04:52:11 SkyScan query 04:52:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.475<-14765 Statuses=0008 0009 04:52:12 Msec=2250 True Az=85.995 Ze=-41.475 Az status=0008 Ze status=0009 04:52:12 Check angles 04:52:12 SkyScan query 04:52:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:52:13 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:52:13 Message to Master queued w/err=0: serial=210032 error=0 04:52:18 Received message from Master: op=Filter serial=210033 04:52:18 Color wheel filter change from 0 to 0 04:52:18 FLIGetFilterPos err=0 currentPosition=0 04:52:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:18 Filter is already there-color wheel unchanged 04:52:18 Received message from Master: op=Shutter serial=210034 04:52:18 Shutter LASER close 04:52:18 Received message from Camera: op=State serial=210036 04:52:18 GetSingleValue result=40 Value=cccccccc 04:52:18 SkyScan query 04:52:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:52:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:18 Parameters OK 04:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:18 Set A/D data flow result=40 04:52:18 Set A/D channel type result=40 04:52:18 Set A/D encoding result=40 04:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:18 Set channel filter=0.000000e+000 result=40 04:52:18 Config A/D Result=40 04:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:18 Get A/D filter: -9.255963e+061 result=40 04:52:18 Get A/D value=-858993460 result=40 04:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:18 Parameters OK 04:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:18 Set A/D data flow result=40 04:52:18 Set A/D channel type result=40 04:52:18 Set A/D encoding result=40 04:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:18 Set channel filter=0.000000e+000 result=40 04:52:18 Config A/D Result=40 04:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:18 Get A/D filter: -9.255963e+061 result=40 04:52:18 Get A/D value=-858993460 result=40 04:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:18 Aux= 04:52:18 Message to Camera, serial 210036 queued 04:52:55 Received message from Master: op=PointingHead serial=210049 04:52:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:52:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:52:56 Point started: ret=0 04:52:56 point_skyscan result=0 04:52:56 Check angles 04:52:56 SkyScan query 04:52:57 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.03<-17402 Statuses=0009 0009 04:52:57 Msec=0 True Az=108.78 Ze=-81.03 Az status=0009 Ze status=0009 04:52:57 Check angles 04:52:57 SkyScan query 04:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 04:52:58 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 04:52:58 Check angles 04:52:58 SkyScan query 04:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 04:52:58 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 04:52:59 Check angles 04:52:59 SkyScan query 04:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 04:52:59 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 04:52:59 Check angles 04:52:59 SkyScan query 04:53:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 04:53:00 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 04:53:00 Check angles 04:53:00 SkyScan query 04:53:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:53:01 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:53:01 Message to Master queued w/err=0: serial=210049 error=0 04:53:06 Received message from Master: op=Filter serial=210050 04:53:06 Color wheel filter change from 0 to 0 04:53:06 FLIGetFilterPos err=0 currentPosition=0 04:53:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:06 Filter is already there-color wheel unchanged 04:53:06 Received message from Master: op=Shutter serial=210051 04:53:06 Shutter LASER open 04:53:06 Received message from Camera: op=State serial=210053 04:53:06 GetSingleValue result=40 Value=cccccccc 04:53:06 SkyScan query 04:53:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:53:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:07 Parameters OK 04:53:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:07 Set A/D data flow result=40 04:53:07 Set A/D channel type result=40 04:53:07 Set A/D encoding result=40 04:53:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:07 Set channel filter=0.000000e+000 result=40 04:53:07 Config A/D Result=40 04:53:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:07 Get A/D filter: -9.255963e+061 result=40 04:53:07 Get A/D value=-858993460 result=40 04:53:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:07 Parameters OK 04:53:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:07 Set A/D data flow result=40 04:53:07 Set A/D channel type result=40 04:53:07 Set A/D encoding result=40 04:53:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:07 Set channel filter=0.000000e+000 result=40 04:53:07 Config A/D Result=40 04:53:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:07 Get A/D filter: -9.255963e+061 result=40 04:53:07 Get A/D value=-858993460 result=40 04:53:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:07 Aux= 04:53:07 Message to Camera, serial 210053 queued 04:53:15 Received message from Master: op=Shutter serial=210063 04:53:15 Shutter LASER close 04:53:16 Received message from Master: op=PointingHead serial=210067 04:53:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:53:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:53:16 Point started: ret=0 04:53:16 point_skyscan result=0 04:53:17 Check angles 04:53:17 SkyScan query 04:53:17 SkyScan query done: ret=0 az=89.535<-5969 ze=156.87<-1542 Statuses=0009 0009 04:53:17 Msec=0 True Az=89.535 Ze=156.87 Az status=0009 Ze status=0009 04:53:17 Check angles 04:53:17 SkyScan query 04:53:18 SkyScan query done: ret=0 az=72.03<-4802 ze=135.93<-2938 Statuses=0009 0009 04:53:18 Msec=750 True Az=72.03 Ze=135.93 Az status=0009 Ze status=0009 04:53:18 Check angles 04:53:18 SkyScan query 04:53:19 SkyScan query done: ret=0 az=54.21<-3614 ze=114.465<-4369 Statuses=0009 0009 04:53:19 Msec=1500 True Az=54.21 Ze=114.465 Az status=0009 Ze status=0009 04:53:19 Check angles 04:53:19 SkyScan query 04:53:20 SkyScan query done: ret=0 az=41.01<-2734 ze=93.57<-5762 Statuses=0009 0009 04:53:20 Msec=2250 True Az=41.01 Ze=93.57 Az status=0009 Ze status=0009 04:53:20 Check angles 04:53:20 SkyScan query 04:53:20 SkyScan query done: ret=0 az=40.98<-2732 ze=72.57<-7162 Statuses=0008 0009 04:53:20 Msec=3000 True Az=40.98 Ze=72.57 Az status=0008 Ze status=0009 04:53:20 Check angles 04:53:20 SkyScan query 04:53:21 SkyScan query done: ret=0 az=40.98<-2732 ze=52.335<-8511 Statuses=0008 0009 04:53:21 Msec=3750 True Az=40.98 Ze=52.335 Az status=0008 Ze status=0009 04:53:21 Check angles 04:53:21 SkyScan query 04:53:22 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 04:53:22 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 04:53:22 Message to Master queued w/err=0: serial=210067 error=0 04:53:27 Received message from Master: op=Filter serial=210068 04:53:27 Color wheel filter change from 0 to 0 04:53:27 FLIGetFilterPos err=0 currentPosition=0 04:53:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:27 Filter is already there-color wheel unchanged 04:53:27 Received message from Master: op=Shutter serial=210069 04:53:27 Shutter LASER close 04:53:27 Received message from Camera: op=State serial=210071 04:53:27 GetSingleValue result=40 Value=cccccccc 04:53:27 SkyScan query 04:53:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:53:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:28 Parameters OK 04:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:28 Set A/D data flow result=40 04:53:28 Set A/D channel type result=40 04:53:28 Set A/D encoding result=40 04:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:28 Set channel filter=0.000000e+000 result=40 04:53:28 Config A/D Result=40 04:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:28 Get A/D filter: -9.255963e+061 result=40 04:53:28 Get A/D value=-858993460 result=40 04:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:28 Parameters OK 04:53:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:28 Set A/D data flow result=40 04:53:28 Set A/D channel type result=40 04:53:28 Set A/D encoding result=40 04:53:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:28 Set channel filter=0.000000e+000 result=40 04:53:28 Config A/D Result=40 04:53:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:28 Get A/D filter: -9.255963e+061 result=40 04:53:28 Get A/D value=-858993460 result=40 04:53:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:28 Aux= 04:53:28 Message to Camera, serial 210071 queued 04:54:05 Received message from Master: op=PointingHead serial=210084 04:54:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:54:05 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:54:05 Point started: ret=0 04:54:05 point_skyscan result=0 04:54:06 Check angles 04:54:06 SkyScan query 04:54:06 SkyScan query done: ret=0 az=40.995<-2733 ze=21.855<-10543 Statuses=0008 0009 04:54:06 Msec=0 True Az=40.995 Ze=21.855 Az status=0008 Ze status=0009 04:54:06 Check angles 04:54:06 SkyScan query 04:54:07 SkyScan query done: ret=0 az=40.995<-2733 ze=0.9<-11940 Statuses=0008 0009 04:54:07 Msec=750 True Az=40.995 Ze=0.9 Az status=0008 Ze status=0009 04:54:07 Check angles 04:54:07 SkyScan query 04:54:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.52<-13368 Statuses=0008 0009 04:54:08 Msec=1500 True Az=40.995 Ze=-20.52 Az status=0008 Ze status=0009 04:54:08 Check angles 04:54:08 SkyScan query 04:54:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 04:54:09 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 04:54:09 Check angles 04:54:09 SkyScan query 04:54:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:54:09 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:54:09 Message to Master queued w/err=0: serial=210084 error=0 04:54:14 Received message from Master: op=Filter serial=210085 04:54:14 Color wheel filter change from 0 to 0 04:54:14 FLIGetFilterPos err=0 currentPosition=0 04:54:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:14 Filter is already there-color wheel unchanged 04:54:15 Received message from Master: op=Shutter serial=210086 04:54:15 Shutter LASER close 04:54:15 Received message from Camera: op=State serial=210088 04:54:15 GetSingleValue result=40 Value=cccccccc 04:54:15 SkyScan query 04:54:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:54:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:15 Parameters OK 04:54:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:15 Set A/D data flow result=40 04:54:15 Set A/D channel type result=40 04:54:15 Set A/D encoding result=40 04:54:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:15 Set channel filter=0.000000e+000 result=40 04:54:15 Config A/D Result=40 04:54:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:15 Get A/D filter: -9.255963e+061 result=40 04:54:15 Get A/D value=-858993460 result=40 04:54:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:15 Parameters OK 04:54:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:15 Set A/D data flow result=40 04:54:15 Set A/D channel type result=40 04:54:15 Set A/D encoding result=40 04:54:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:15 Set channel filter=0.000000e+000 result=40 04:54:15 Config A/D Result=40 04:54:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:15 Get A/D filter: -9.255963e+061 result=40 04:54:15 Get A/D value=-858993460 result=40 04:54:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:15 Aux= 04:54:15 Message to Camera, serial 210088 queued 04:54:52 Received message from Master: op=PointingHead serial=210101 04:54:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:54:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:54:52 Point started: ret=0 04:54:52 point_skyscan result=0 04:54:53 Check angles 04:54:53 SkyScan query 04:54:54 SkyScan query done: ret=0 az=64.41<-4294 ze=-68.64<-16576 Statuses=0009 0009 04:54:54 Msec=0 True Az=64.41 Ze=-68.64 Az status=0009 Ze status=0009 04:54:54 Check angles 04:54:54 SkyScan query 04:54:54 SkyScan query done: ret=0 az=82.275<-5485 ze=-90.045<-18003 Statuses=0009 0009 04:54:54 Msec=750 True Az=82.275 Ze=-90.045 Az status=0009 Ze status=0009 04:54:55 Check angles 04:54:55 SkyScan query 04:54:55 SkyScan query done: ret=0 az=99.72<-6648 ze=-111.03<-19402 Statuses=0009 0009 04:54:55 Msec=1500 True Az=99.72 Ze=-111.03 Az status=0009 Ze status=0009 04:54:55 Check angles 04:54:55 SkyScan query 04:54:56 SkyScan query done: ret=0 az=117.21<-7814 ze=-131.925<-20795 Statuses=0009 0009 04:54:56 Msec=2250 True Az=117.21 Ze=-131.925 Az status=0009 Ze status=0009 04:54:56 Check angles 04:54:56 SkyScan query 04:54:57 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.57<-21438 Statuses=0009 0008 04:54:57 Msec=3000 True Az=131.07 Ze=-141.57 Az status=0009 Ze status=0008 04:54:57 Check angles 04:54:57 SkyScan query 04:54:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:54:57 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:54:57 Message to Master queued w/err=0: serial=210101 error=0 04:55:02 Received message from Master: op=Filter serial=210102 04:55:02 Color wheel filter change from 0 to 0 04:55:02 FLIGetFilterPos err=0 currentPosition=0 04:55:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:02 Filter is already there-color wheel unchanged 04:55:03 Received message from Master: op=Shutter serial=210103 04:55:03 Shutter LASER close 04:55:03 Received message from Camera: op=State serial=210105 04:55:03 GetSingleValue result=40 Value=cccccccc 04:55:03 SkyScan query 04:55:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:55:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:03 Parameters OK 04:55:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:03 Set A/D data flow result=40 04:55:03 Set A/D channel type result=40 04:55:03 Set A/D encoding result=40 04:55:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:03 Set channel filter=0.000000e+000 result=40 04:55:03 Config A/D Result=40 04:55:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:03 Get A/D filter: -9.255963e+061 result=40 04:55:03 Get A/D value=-858993460 result=40 04:55:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:03 Parameters OK 04:55:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:03 Set A/D data flow result=40 04:55:03 Set A/D channel type result=40 04:55:03 Set A/D encoding result=40 04:55:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:03 Set channel filter=0.000000e+000 result=40 04:55:03 Config A/D Result=40 04:55:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-17 04:55:03] 04:55:03 Get A/D filter: -9.255963e+061 result=40 04:55:03 Get A/D value=-858993460 result=40 04:55:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:03 Aux= 04:55:03 Message to Camera, serial 210105 queued 04:55:40 Received message from Master: op=PointingHead serial=210118 04:55:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:55:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:55:40 Point started: ret=0 04:55:40 point_skyscan result=0 04:55:41 Check angles 04:55:41 SkyScan query 04:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0009 0009 04:55:42 Msec=0 True Az=112.995 Ze=-171.06 Az status=0009 Ze status=0009 04:55:42 Check angles 04:55:42 SkyScan query 04:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:55:42 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:55:42 Message to Master queued w/err=0: serial=210118 error=0 04:55:47 Received message from Master: op=Filter serial=210119 04:55:47 Color wheel filter change from 0 to 0 04:55:47 FLIGetFilterPos err=0 currentPosition=0 04:55:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:47 Filter is already there-color wheel unchanged 04:55:48 Received message from Master: op=Shutter serial=210120 04:55:48 Shutter LASER open 04:55:48 Received message from Camera: op=State serial=210122 04:55:48 GetSingleValue result=40 Value=cccccccc 04:55:48 SkyScan query 04:55:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:55:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:48 Parameters OK 04:55:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:48 Set A/D data flow result=40 04:55:48 Set A/D channel type result=40 04:55:48 Set A/D encoding result=40 04:55:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:48 Set channel filter=0.000000e+000 result=40 04:55:48 Config A/D Result=40 04:55:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:48 Get A/D filter: -9.255963e+061 result=40 04:55:48 Get A/D value=-858993460 result=40 04:55:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:48 Parameters OK 04:55:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:48 Set A/D data flow result=40 04:55:48 Set A/D channel type result=40 04:55:48 Set A/D encoding result=40 04:55:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:48 Set channel filter=0.000000e+000 result=40 04:55:48 Config A/D Result=40 04:55:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:48 Get A/D filter: -9.255963e+061 result=40 04:55:48 Get A/D value=-858993460 result=40 04:55:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:48 Aux= 04:55:48 Message to Camera, serial 210122 queued [UTC 2018-12-17 04:55:52] 04:55:57 Received message from Master: op=Shutter serial=210132 04:55:57 Shutter LASER close 04:55:58 Received message from Master: op=PointingHead serial=210136 04:55:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:55:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:55:58 Point started: ret=0 04:55:58 point_skyscan result=0 04:55:59 Check angles 04:55:59 SkyScan query 04:55:59 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.115<-21541 Statuses=0009 0009 04:55:59 Msec=0 True Az=136.14 Ze=-143.115 Az status=0009 Ze status=0009 04:55:59 Check angles 04:55:59 SkyScan query 04:56:00 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.74<-20116 Statuses=0009 0009 04:56:00 Msec=750 True Az=153.96 Ze=-121.74 Az status=0009 Ze status=0009 04:56:00 Check angles 04:56:00 SkyScan query 04:56:01 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.68<-18712 Statuses=0009 0009 04:56:01 Msec=1500 True Az=171.45 Ze=-100.68 Az status=0009 Ze status=0009 04:56:01 Check angles 04:56:01 SkyScan query 04:56:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.875<-17325 Statuses=0008 0009 04:56:01 Msec=2250 True Az=176.01 Ze=-79.875 Az status=0008 Ze status=0009 04:56:02 Check angles 04:56:02 SkyScan query 04:56:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.38<-15892 Statuses=0008 0009 04:56:02 Msec=3000 True Az=176.01 Ze=-58.38 Az status=0008 Ze status=0009 04:56:02 Check angles 04:56:02 SkyScan query 04:56:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:56:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:56:03 Message to Master queued w/err=0: serial=210136 error=0 04:56:08 Received message from Master: op=Filter serial=210137 04:56:08 Color wheel filter change from 0 to 0 04:56:08 FLIGetFilterPos err=0 currentPosition=0 04:56:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:08 Filter is already there-color wheel unchanged 04:56:08 Received message from Master: op=Shutter serial=210138 04:56:08 Shutter LASER close 04:56:08 Received message from Camera: op=State serial=210140 04:56:08 GetSingleValue result=40 Value=cccccccc 04:56:08 SkyScan query 04:56:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:56:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:09 Parameters OK 04:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:09 Set A/D data flow result=40 04:56:09 Set A/D channel type result=40 04:56:09 Set A/D encoding result=40 04:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:09 Set channel filter=0.000000e+000 result=40 04:56:09 Config A/D Result=40 04:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:09 Get A/D filter: -9.255963e+061 result=40 04:56:09 Get A/D value=-858993460 result=40 04:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:09 Parameters OK 04:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:09 Set A/D data flow result=40 04:56:09 Set A/D channel type result=40 04:56:09 Set A/D encoding result=40 04:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:09 Set channel filter=0.000000e+000 result=40 04:56:09 Config A/D Result=40 04:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:09 Get A/D filter: -9.255963e+061 result=40 04:56:09 Get A/D value=-858993460 result=40 04:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:09 Aux= 04:56:09 Message to Camera, serial 210140 queued 04:56:46 Received message from Master: op=PointingHead serial=210153 04:56:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:56:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:56:46 Point started: ret=0 04:56:46 point_skyscan result=0 04:56:47 Check angles 04:56:47 SkyScan query 04:56:47 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.975<-13465 Statuses=0009 0009 04:56:47 Msec=0 True Az=152.94 Ze=-21.975 Az status=0009 Ze status=0009 04:56:48 Check angles 04:56:48 SkyScan query 04:56:48 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.54<-12036 Statuses=0009 0009 04:56:48 Msec=750 True Az=135.15 Ze=-0.54 Az status=0009 Ze status=0009 04:56:48 Check angles 04:56:48 SkyScan query 04:56:49 SkyScan query done: ret=0 az=117.57<-7838 ze=20.4<-10640 Statuses=0009 0009 04:56:49 Msec=1500 True Az=117.57 Ze=20.4 Az status=0009 Ze status=0009 04:56:49 Check angles 04:56:49 SkyScan query 04:56:50 SkyScan query done: ret=0 az=100.23<-6682 ze=41.385<-9241 Statuses=0009 0009 04:56:50 Msec=2250 True Az=100.23 Ze=41.385 Az status=0009 Ze status=0009 04:56:50 Check angles 04:56:50 SkyScan query 04:56:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 04:56:50 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 04:56:51 Check angles 04:56:51 SkyScan query 04:56:51 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 04:56:51 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 04:56:51 Message to Master queued w/err=0: serial=210153 error=0 04:56:56 Received message from Master: op=Filter serial=210154 04:56:56 Color wheel filter change from 0 to 0 04:56:56 FLIGetFilterPos err=0 currentPosition=0 04:56:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:56 Filter is already there-color wheel unchanged 04:56:56 Received message from Master: op=Shutter serial=210155 04:56:56 Shutter LASER close 04:56:56 Received message from Camera: op=State serial=210157 04:56:56 GetSingleValue result=40 Value=cccccccc 04:56:56 SkyScan query 04:56:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:56:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:57 Parameters OK 04:56:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:57 Set A/D data flow result=40 04:56:57 Set A/D channel type result=40 04:56:57 Set A/D encoding result=40 04:56:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:57 Set channel filter=0.000000e+000 result=40 04:56:57 Config A/D Result=40 04:56:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:57 Get A/D filter: -9.255963e+061 result=40 04:56:57 Get A/D value=-858993460 result=40 04:56:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:57 Parameters OK 04:56:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:57 Set A/D data flow result=40 04:56:57 Set A/D channel type result=40 04:56:57 Set A/D encoding result=40 04:56:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:57 Set channel filter=0.000000e+000 result=40 04:56:57 Config A/D Result=40 04:56:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:57 Get A/D filter: -9.255963e+061 result=40 04:56:57 Get A/D value=-858993460 result=40 04:56:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:57 Aux= 04:56:57 Message to Camera, serial 210157 queued 04:57:34 Received message from Master: op=PointingHead serial=210170 04:57:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:57:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:57:34 Point started: ret=0 04:57:34 point_skyscan result=0 04:57:35 Check angles 04:57:35 SkyScan query 04:57:36 SkyScan query done: ret=0 az=85.995<-5733 ze=21.51<-10566 Statuses=0008 0009 04:57:36 Msec=0 True Az=85.995 Ze=21.51 Az status=0008 Ze status=0009 04:57:36 Check angles 04:57:36 SkyScan query 04:57:36 SkyScan query done: ret=0 az=85.995<-5733 ze=0.555<-11963 Statuses=0008 0009 04:57:36 Msec=750 True Az=85.995 Ze=0.555 Az status=0008 Ze status=0009 04:57:37 Check angles 04:57:37 SkyScan query 04:57:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.49<-13366 Statuses=0008 0009 04:57:37 Msec=1500 True Az=85.995 Ze=-20.49 Az status=0008 Ze status=0009 04:57:37 Check angles 04:57:37 SkyScan query 04:57:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.325<-14755 Statuses=0008 0009 04:57:38 Msec=2250 True Az=85.995 Ze=-41.325 Az status=0008 Ze status=0009 04:57:38 Check angles 04:57:38 SkyScan query 04:57:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 04:57:39 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 04:57:39 Message to Master queued w/err=0: serial=210170 error=0 04:57:44 Received message from Master: op=Filter serial=210171 04:57:44 Color wheel filter change from 0 to 0 04:57:44 FLIGetFilterPos err=0 currentPosition=0 04:57:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:44 Filter is already there-color wheel unchanged 04:57:44 Received message from Master: op=Shutter serial=210172 04:57:44 Shutter LASER close 04:57:44 Received message from Camera: op=State serial=210174 04:57:44 GetSingleValue result=40 Value=cccccccc 04:57:44 SkyScan query 04:57:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:57:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:44 Parameters OK 04:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:44 Set A/D data flow result=40 04:57:44 Set A/D channel type result=40 04:57:44 Set A/D encoding result=40 04:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:44 Set channel filter=0.000000e+000 result=40 04:57:44 Config A/D Result=40 04:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:44 Get A/D filter: -9.255963e+061 result=40 04:57:44 Get A/D value=-858993460 result=40 04:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:44 Parameters OK 04:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:44 Set A/D data flow result=40 04:57:44 Set A/D channel type result=40 04:57:44 Set A/D encoding result=40 04:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:44 Set channel filter=0.000000e+000 result=40 04:57:44 Config A/D Result=40 04:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:44 Get A/D filter: -9.255963e+061 result=40 04:57:44 Get A/D value=-858993460 result=40 04:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:44 Aux= 04:57:44 Message to Camera, serial 210174 queued 04:58:21 Received message from Master: op=PointingHead serial=210187 04:58:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:58:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:58:22 Point started: ret=0 04:58:22 point_skyscan result=0 04:58:22 Check angles 04:58:22 SkyScan query 04:58:23 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.345<-17423 Statuses=0009 0009 04:58:23 Msec=0 True Az=109.11 Ze=-81.345 Az status=0009 Ze status=0009 04:58:23 Check angles 04:58:23 SkyScan query 04:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 04:58:24 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 04:58:24 Check angles 04:58:24 SkyScan query 04:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.155<-20277 Statuses=0008 0009 04:58:24 Msec=1500 True Az=112.995 Ze=-124.155 Az status=0008 Ze status=0009 04:58:25 Check angles 04:58:25 SkyScan query 04:58:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 04:58:25 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 04:58:25 Check angles 04:58:25 SkyScan query 04:58:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 04:58:26 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 04:58:26 Check angles 04:58:26 SkyScan query 04:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 04:58:27 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 04:58:27 Message to Master queued w/err=0: serial=210187 error=0 04:58:32 Received message from Master: op=Filter serial=210188 04:58:32 Color wheel filter change from 0 to 0 04:58:32 FLIGetFilterPos err=0 currentPosition=0 04:58:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:32 Filter is already there-color wheel unchanged 04:58:32 Received message from Master: op=Shutter serial=210189 04:58:32 Shutter LASER open 04:58:32 Received message from Camera: op=State serial=210191 04:58:32 GetSingleValue result=40 Value=cccccccc 04:58:32 SkyScan query 04:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:58:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:33 Parameters OK 04:58:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:33 Set A/D data flow result=40 04:58:33 Set A/D channel type result=40 04:58:33 Set A/D encoding result=40 04:58:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:33 Set channel filter=0.000000e+000 result=40 04:58:33 Config A/D Result=40 04:58:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:33 Get A/D filter: -9.255963e+061 result=40 04:58:33 Get A/D value=-858993460 result=40 04:58:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:33 Parameters OK 04:58:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:33 Set A/D data flow result=40 04:58:33 Set A/D channel type result=40 04:58:33 Set A/D encoding result=40 04:58:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:33 Set channel filter=0.000000e+000 result=40 04:58:33 Config A/D Result=40 04:58:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:33 Get A/D filter: -9.255963e+061 result=40 04:58:33 Get A/D value=-858993460 result=40 04:58:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:33 Aux= 04:58:33 Message to Camera, serial 210191 queued 04:58:41 Received message from Master: op=Shutter serial=210201 04:58:41 Shutter LASER close 04:58:41 Received message from Master: op=PointingHead serial=210205 04:58:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:58:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:58:42 Point started: ret=0 04:58:42 point_skyscan result=0 04:58:43 Check angles 04:58:43 SkyScan query 04:58:43 SkyScan query done: ret=0 az=89.64<-5976 ze=157.02<-1532 Statuses=0009 0009 04:58:43 Msec=0 True Az=89.64 Ze=157.02 Az status=0009 Ze status=0009 04:58:43 Check angles 04:58:43 SkyScan query 04:58:44 SkyScan query done: ret=0 az=71.835<-4789 ze=135.615<-2959 Statuses=0009 0009 04:58:44 Msec=750 True Az=71.835 Ze=135.615 Az status=0009 Ze status=0009 04:58:44 Check angles 04:58:44 SkyScan query 04:58:45 SkyScan query done: ret=0 az=54.54<-3636 ze=114.615<-4359 Statuses=0009 0009 04:58:45 Msec=1500 True Az=54.54 Ze=114.615 Az status=0009 Ze status=0009 04:58:45 Check angles 04:58:45 SkyScan query 04:58:45 SkyScan query done: ret=0 az=41.01<-2734 ze=93.72<-5752 Statuses=0009 0009 04:58:45 Msec=2250 True Az=41.01 Ze=93.72 Az status=0009 Ze status=0009 04:58:46 Check angles 04:58:46 SkyScan query 04:58:46 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 04:58:46 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 04:58:46 Check angles 04:58:46 SkyScan query 04:58:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 04:58:47 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 04:58:47 Check angles 04:58:47 SkyScan query 04:58:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:58:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:58:48 Message to Master queued w/err=0: serial=210205 error=0 04:58:53 Received message from Master: op=Filter serial=210206 04:58:53 Color wheel filter change from 0 to 0 04:58:53 FLIGetFilterPos err=0 currentPosition=0 04:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:53 Filter is already there-color wheel unchanged 04:58:53 Received message from Master: op=Shutter serial=210207 04:58:53 Shutter LASER close 04:58:53 Received message from Camera: op=State serial=210209 04:58:53 GetSingleValue result=40 Value=cccccccc 04:58:53 SkyScan query 04:58:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:54 Parameters OK 04:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:54 Set A/D data flow result=40 04:58:54 Set A/D channel type result=40 04:58:54 Set A/D encoding result=40 04:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:54 Set channel filter=0.000000e+000 result=40 04:58:54 Config A/D Result=40 04:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:54 Get A/D filter: -9.255963e+061 result=40 04:58:54 Get A/D value=-858993460 result=40 04:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:54 Parameters OK 04:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:54 Set A/D data flow result=40 04:58:54 Set A/D channel type result=40 04:58:54 Set A/D encoding result=40 04:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:54 Set channel filter=0.000000e+000 result=40 04:58:54 Config A/D Result=40 04:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:54 Get A/D filter: -9.255963e+061 result=40 04:58:54 Get A/D value=-858993460 result=40 04:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:54 Aux= 04:58:54 Message to Camera, serial 210209 queued 04:59:31 Received message from Master: op=PointingHead serial=210222 04:59:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:59:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:59:31 Point started: ret=0 04:59:31 point_skyscan result=0 04:59:32 Check angles 04:59:32 SkyScan query 04:59:32 SkyScan query done: ret=0 az=40.995<-2733 ze=21.54<-10564 Statuses=0008 0009 04:59:32 Msec=0 True Az=40.995 Ze=21.54 Az status=0008 Ze status=0009 04:59:32 Check angles 04:59:32 SkyScan query 04:59:33 SkyScan query done: ret=0 az=40.995<-2733 ze=0.57<-11962 Statuses=0008 0009 04:59:33 Msec=750 True Az=40.995 Ze=0.57 Az status=0008 Ze status=0009 04:59:33 Check angles 04:59:33 SkyScan query 04:59:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.835<-13389 Statuses=0008 0009 04:59:34 Msec=1500 True Az=40.995 Ze=-20.835 Az status=0008 Ze status=0009 04:59:34 Check angles 04:59:34 SkyScan query 04:59:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.595<-14573 Statuses=0008 0009 04:59:34 Msec=2250 True Az=40.995 Ze=-38.595 Az status=0008 Ze status=0009 04:59:35 Check angles 04:59:35 SkyScan query 04:59:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 04:59:35 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 04:59:35 Message to Master queued w/err=0: serial=210222 error=0 04:59:40 Received message from Master: op=Filter serial=210223 04:59:40 Color wheel filter change from 0 to 0 04:59:40 FLIGetFilterPos err=0 currentPosition=0 04:59:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:40 Filter is already there-color wheel unchanged 04:59:40 Received message from Master: op=Shutter serial=210224 04:59:40 Shutter LASER close 04:59:40 Received message from Camera: op=State serial=210226 04:59:40 GetSingleValue result=40 Value=cccccccc 04:59:40 SkyScan query 04:59:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:59:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:41 Parameters OK 04:59:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:41 Set A/D data flow result=40 04:59:41 Set A/D channel type result=40 04:59:41 Set A/D encoding result=40 04:59:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:41 Set channel filter=0.000000e+000 result=40 04:59:41 Config A/D Result=40 04:59:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:41 Get A/D filter: -9.255963e+061 result=40 04:59:41 Get A/D value=-858993460 result=40 04:59:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:41 Parameters OK 04:59:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:41 Set A/D data flow result=40 04:59:41 Set A/D channel type result=40 04:59:41 Set A/D encoding result=40 04:59:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:41 Set channel filter=0.000000e+000 result=40 04:59:41 Config A/D Result=40 04:59:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:41 Get A/D filter: -9.255963e+061 result=40 04:59:41 Get A/D value=-858993460 result=40 04:59:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:41 Aux= 04:59:41 Message to Camera, serial 210226 queued 05:00:18 Received message from Master: op=PointingHead serial=210239 05:00:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:00:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:00:18 Point started: ret=0 05:00:18 point_skyscan result=0 05:00:19 Check angles 05:00:19 SkyScan query 05:00:20 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.1<-16540 Statuses=0009 0009 05:00:20 Msec=0 True Az=63.825 Ze=-68.1 Az status=0009 Ze status=0009 05:00:20 Check angles 05:00:20 SkyScan query 05:00:20 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.565<-17971 Statuses=0009 0009 05:00:20 Msec=750 True Az=81.66 Ze=-89.565 Az status=0009 Ze status=0009 05:00:20 Check angles 05:00:20 SkyScan query 05:00:21 SkyScan query done: ret=0 az=99.63<-6642 ze=-110.925<-19395 Statuses=0009 0009 05:00:21 Msec=1500 True Az=99.63 Ze=-110.925 Az status=0009 Ze status=0009 05:00:21 Check angles 05:00:21 SkyScan query 05:00:22 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.835<-20789 Statuses=0009 0009 05:00:22 Msec=2250 True Az=117.03 Ze=-131.835 Az status=0009 Ze status=0009 05:00:22 Check angles 05:00:22 SkyScan query 05:00:23 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 05:00:23 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 05:00:23 Check angles 05:00:23 SkyScan query 05:00:23 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 05:00:23 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 05:00:23 Message to Master queued w/err=0: serial=210239 error=0 05:00:28 Received message from Master: op=Filter serial=210240 05:00:28 Color wheel filter change from 0 to 0 05:00:28 FLIGetFilterPos err=0 currentPosition=0 05:00:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:28 Filter is already there-color wheel unchanged 05:00:28 Received message from Master: op=Shutter serial=210241 05:00:28 Shutter LASER close 05:00:29 Received message from Camera: op=State serial=210243 05:00:29 GetSingleValue result=40 Value=cccccccc 05:00:29 SkyScan query 05:00:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:00:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:29 Parameters OK 05:00:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:29 Set A/D data flow result=40 05:00:29 Set A/D channel type result=40 05:00:29 Set A/D encoding result=40 05:00:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:29 Set channel filter=0.000000e+000 result=40 05:00:29 Config A/D Result=40 05:00:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:29 Get A/D filter: -9.255963e+061 result=40 05:00:29 Get A/D value=-858993460 result=40 05:00:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:29 Parameters OK 05:00:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:29 Set A/D data flow result=40 05:00:29 Set A/D channel type result=40 05:00:29 Set A/D encoding result=40 05:00:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:29 Set channel filter=0.000000e+000 result=40 05:00:29 Config A/D Result=40 05:00:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:29 Get A/D filter: -9.255963e+061 result=40 05:00:29 Get A/D value=-858993460 result=40 05:00:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:29 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:29 Aux= 05:00:29 Message to Camera, serial 210243 queued 05:01:05 Received message from Master: op=PointingHead serial=210255 05:01:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:01:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:01:05 Point started: ret=0 05:01:05 point_skyscan result=0 05:01:06 Check angles 05:01:06 SkyScan query 05:01:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.15<-23410 Statuses=0009 0009 05:01:07 Msec=0 True Az=113.01 Ze=-171.15 Az status=0009 Ze status=0009 05:01:07 Check angles 05:01:07 SkyScan query 05:01:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:01:07 Msec=750 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 05:01:07 Message to Master queued w/err=0: serial=210255 error=0 05:01:12 Received message from Master: op=Filter serial=210256 05:01:12 Color wheel filter change from 0 to 0 05:01:12 FLIGetFilterPos err=0 currentPosition=0 05:01:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:12 Filter is already there-color wheel unchanged 05:01:13 Received message from Master: op=Shutter serial=210257 05:01:13 Shutter LASER open 05:01:13 Received message from Camera: op=State serial=210259 05:01:13 GetSingleValue result=40 Value=cccccccc 05:01:13 SkyScan query 05:01:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.98<-23532 Statuses=0008 0008 05:01:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:13 Parameters OK 05:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:13 Set A/D data flow result=40 05:01:13 Set A/D channel type result=40 05:01:13 Set A/D encoding result=40 05:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:13 Set channel filter=0.000000e+000 result=40 05:01:13 Config A/D Result=40 05:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:13 Get A/D filter: -9.255963e+061 result=40 05:01:13 Get A/D value=-858993460 result=40 05:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:13 Parameters OK 05:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:13 Set A/D data flow result=40 05:01:13 Set A/D channel type result=40 05:01:13 Set A/D encoding result=40 05:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:13 Set channel filter=0.000000e+000 result=40 05:01:13 Config A/D Result=40 05:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:13 Get A/D filter: -9.255963e+061 result=40 05:01:13 Get A/D value=-858993460 result=40 05:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.979996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:13 Aux= 05:01:13 Message to Camera, serial 210259 queued 05:01:22 Received message from Master: op=Shutter serial=210269 05:01:22 Shutter LASER close 05:01:22 Received message from Master: op=PointingHead serial=210273 05:01:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:01:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:01:23 Point started: ret=0 05:01:23 point_skyscan result=0 05:01:24 Check angles 05:01:24 SkyScan query 05:01:24 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.04<-21536 Statuses=0009 0009 05:01:24 Msec=0 True Az=136.17 Ze=-143.04 Az status=0009 Ze status=0009 05:01:24 Check angles 05:01:24 SkyScan query 05:01:25 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.025<-20135 Statuses=0009 0009 05:01:25 Msec=750 True Az=153.63 Ze=-122.025 Az status=0009 Ze status=0009 05:01:25 Check angles 05:01:25 SkyScan query 05:01:26 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.13<-18742 Statuses=0009 0009 05:01:26 Msec=1500 True Az=171.075 Ze=-101.13 Az status=0009 Ze status=0009 05:01:26 Check angles 05:01:26 SkyScan query 05:01:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.74<-17316 Statuses=0008 0009 05:01:26 Msec=2250 True Az=176.01 Ze=-79.74 Az status=0008 Ze status=0009 05:01:27 Check angles 05:01:27 SkyScan query 05:01:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.74<-15916 Statuses=0008 0009 05:01:27 Msec=3000 True Az=176.01 Ze=-58.74 Az status=0008 Ze status=0009 05:01:27 Check angles 05:01:27 SkyScan query 05:01:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:01:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:01:28 Message to Master queued w/err=0: serial=210273 error=0 05:01:33 Received message from Master: op=Filter serial=210274 05:01:33 Color wheel filter change from 0 to 0 05:01:33 FLIGetFilterPos err=0 currentPosition=0 05:01:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:33 Filter is already there-color wheel unchanged 05:01:33 Received message from Master: op=Shutter serial=210275 05:01:33 Shutter LASER close 05:01:33 Received message from Camera: op=State serial=210277 05:01:33 GetSingleValue result=40 Value=cccccccc 05:01:33 SkyScan query 05:01:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:01:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:34 Parameters OK 05:01:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:34 Set A/D data flow result=40 05:01:34 Set A/D channel type result=40 05:01:34 Set A/D encoding result=40 05:01:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:34 Set channel filter=0.000000e+000 result=40 05:01:34 Config A/D Result=40 05:01:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:34 Get A/D filter: -9.255963e+061 result=40 05:01:34 Get A/D value=-858993460 result=40 05:01:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:34 Parameters OK 05:01:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:34 Set A/D data flow result=40 05:01:34 Set A/D channel type result=40 05:01:34 Set A/D encoding result=40 05:01:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:34 Set channel filter=0.000000e+000 result=40 05:01:34 Config A/D Result=40 05:01:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:34 Get A/D filter: -9.255963e+061 result=40 05:01:34 Get A/D value=-858993460 result=40 05:01:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:34 Aux= 05:01:34 Message to Camera, serial 210277 queued 05:02:11 Received message from Master: op=PointingHead serial=210290 05:02:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:02:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:02:11 Point started: ret=0 05:02:11 point_skyscan result=0 05:02:12 Check angles 05:02:12 SkyScan query 05:02:12 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.9<-13460 Statuses=0009 0009 05:02:12 Msec=0 True Az=152.985 Ze=-21.9 Az status=0009 Ze status=0009 05:02:13 Check angles 05:02:13 SkyScan query 05:02:13 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.825<-12055 Statuses=0009 0009 05:02:13 Msec=750 True Az=135.435 Ze=-0.825 Az status=0009 Ze status=0009 05:02:13 Check angles 05:02:13 SkyScan query 05:02:14 SkyScan query done: ret=0 az=118.02<-7868 ze=20.055<-10663 Statuses=0009 0009 05:02:14 Msec=1500 True Az=118.02 Ze=20.055 Az status=0009 Ze status=0009 05:02:14 Check angles 05:02:14 SkyScan query 05:02:15 SkyScan query done: ret=0 az=100.62<-6708 ze=41.04<-9264 Statuses=0009 0009 05:02:15 Msec=2250 True Az=100.62 Ze=41.04 Az status=0009 Ze status=0009 05:02:15 Check angles 05:02:15 SkyScan query 05:02:15 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 05:02:15 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 05:02:16 Check angles 05:02:16 SkyScan query 05:02:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:02:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:02:16 Message to Master queued w/err=0: serial=210290 error=0 05:02:21 Received message from Master: op=Filter serial=210291 05:02:21 Color wheel filter change from 0 to 0 05:02:21 FLIGetFilterPos err=0 currentPosition=0 05:02:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:21 Filter is already there-color wheel unchanged 05:02:21 Received message from Master: op=Shutter serial=210292 05:02:21 Shutter LASER close 05:02:21 Received message from Camera: op=State serial=210294 05:02:21 GetSingleValue result=40 Value=cccccccc 05:02:21 SkyScan query 05:02:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:02:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:22 Parameters OK 05:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:22 Set A/D data flow result=40 05:02:22 Set A/D channel type result=40 05:02:22 Set A/D encoding result=40 05:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:22 Set channel filter=0.000000e+000 result=40 05:02:22 Config A/D Result=40 05:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:22 Get A/D filter: -9.255963e+061 result=40 05:02:22 Get A/D value=-858993460 result=40 05:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:22 Parameters OK 05:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:22 Set A/D data flow result=40 05:02:22 Set A/D channel type result=40 05:02:22 Set A/D encoding result=40 05:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:22 Set channel filter=0.000000e+000 result=40 05:02:22 Config A/D Result=40 05:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:22 Get A/D filter: -9.255963e+061 result=40 05:02:22 Get A/D value=-858993460 result=40 05:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:22 Aux= 05:02:22 Message to Camera, serial 210294 queued 05:02:59 Received message from Master: op=PointingHead serial=210307 05:02:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:02:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:02:59 Point started: ret=0 05:02:59 point_skyscan result=0 05:03:00 Check angles 05:03:00 SkyScan query 05:03:01 SkyScan query done: ret=0 az=85.995<-5733 ze=21.915<-10539 Statuses=0008 0009 05:03:01 Msec=0 True Az=85.995 Ze=21.915 Az status=0008 Ze status=0009 05:03:01 Check angles 05:03:01 SkyScan query 05:03:01 SkyScan query done: ret=0 az=85.995<-5733 ze=0.54<-11964 Statuses=0008 0009 05:03:01 Msec=750 True Az=85.995 Ze=0.54 Az status=0008 Ze status=0009 05:03:01 Check angles 05:03:01 SkyScan query 05:03:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.865<-13391 Statuses=0008 0009 05:03:02 Msec=1500 True Az=85.995 Ze=-20.865 Az status=0008 Ze status=0009 05:03:02 Check angles 05:03:02 SkyScan query 05:03:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.775<-14785 Statuses=0008 0009 05:03:03 Msec=2250 True Az=85.995 Ze=-41.775 Az status=0008 Ze status=0009 05:03:03 Check angles 05:03:03 SkyScan query 05:03:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:03:04 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:03:04 Message to Master queued w/err=0: serial=210307 error=0 05:03:09 Received message from Master: op=Filter serial=210308 05:03:09 Color wheel filter change from 0 to 0 05:03:09 FLIGetFilterPos err=0 currentPosition=0 05:03:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:09 Filter is already there-color wheel unchanged 05:03:09 Received message from Master: op=Shutter serial=210309 05:03:09 Shutter LASER close 05:03:09 Received message from Camera: op=State serial=210311 05:03:09 GetSingleValue result=40 Value=cccccccc 05:03:09 SkyScan query 05:03:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:03:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:09 Parameters OK 05:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:09 Set A/D data flow result=40 05:03:09 Set A/D channel type result=40 05:03:09 Set A/D encoding result=40 05:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:09 Set channel filter=0.000000e+000 result=40 05:03:09 Config A/D Result=40 05:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:09 Get A/D filter: -9.255963e+061 result=40 05:03:09 Get A/D value=-858993460 result=40 05:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:09 Parameters OK 05:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:09 Set A/D data flow result=40 05:03:09 Set A/D channel type result=40 05:03:09 Set A/D encoding result=40 05:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:09 Set channel filter=0.000000e+000 result=40 05:03:09 Config A/D Result=40 05:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:09 Get A/D filter: -9.255963e+061 result=40 05:03:09 Get A/D value=-858993460 result=40 05:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:09 Aux= 05:03:09 Message to Camera, serial 210311 queued 05:03:46 Received message from Master: op=PointingHead serial=210324 05:03:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:03:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:03:47 Point started: ret=0 05:03:47 point_skyscan result=0 05:03:47 Check angles 05:03:47 SkyScan query 05:03:48 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.705<-17447 Statuses=0009 0009 05:03:48 Msec=0 True Az=109.35 Ze=-81.705 Az status=0009 Ze status=0009 05:03:48 Check angles 05:03:48 SkyScan query 05:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 05:03:49 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 05:03:49 Check angles 05:03:49 SkyScan query 05:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 05:03:49 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 05:03:50 Check angles 05:03:50 SkyScan query 05:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 05:03:50 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 05:03:50 Check angles 05:03:50 SkyScan query 05:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 05:03:51 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 05:03:51 Check angles 05:03:51 SkyScan query 05:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:03:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:03:52 Message to Master queued w/err=0: serial=210324 error=0 05:03:57 Received message from Master: op=Filter serial=210325 05:03:57 Color wheel filter change from 0 to 0 05:03:57 FLIGetFilterPos err=0 currentPosition=0 05:03:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:57 Filter is already there-color wheel unchanged 05:03:57 Received message from Master: op=Shutter serial=210326 05:03:57 Shutter LASER open 05:03:57 Received message from Camera: op=State serial=210328 05:03:57 GetSingleValue result=40 Value=cccccccc 05:03:57 SkyScan query 05:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:03:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:58 Parameters OK 05:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:58 Set A/D data flow result=40 05:03:58 Set A/D channel type result=40 05:03:58 Set A/D encoding result=40 05:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:58 Set channel filter=0.000000e+000 result=40 05:03:58 Config A/D Result=40 05:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:58 Get A/D filter: -9.255963e+061 result=40 05:03:58 Get A/D value=-858993460 result=40 05:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:58 Parameters OK 05:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:58 Set A/D data flow result=40 05:03:58 Set A/D channel type result=40 05:03:58 Set A/D encoding result=40 05:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:58 Set channel filter=0.000000e+000 result=40 05:03:58 Config A/D Result=40 05:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:58 Get A/D filter: -9.255963e+061 result=40 05:03:58 Get A/D value=-858993460 result=40 05:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:58 Aux= 05:03:58 Message to Camera, serial 210328 queued 05:04:06 Received message from Master: op=Shutter serial=210338 05:04:06 Shutter LASER close 05:04:06 Received message from Master: op=PointingHead serial=210342 05:04:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:04:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:04:07 Point started: ret=0 05:04:07 point_skyscan result=0 05:04:07 Check angles 05:04:07 SkyScan query 05:04:08 SkyScan query done: ret=0 az=90.135<-6009 ze=157.425<-1505 Statuses=0009 0009 05:04:08 Msec=0 True Az=90.135 Ze=157.425 Az status=0009 Ze status=0009 05:04:08 Check angles 05:04:08 SkyScan query 05:04:09 SkyScan query done: ret=0 az=72.675<-4845 ze=136.455<-2903 Statuses=0009 0009 05:04:09 Msec=750 True Az=72.675 Ze=136.455 Az status=0009 Ze status=0009 05:04:09 Check angles 05:04:09 SkyScan query 05:04:10 SkyScan query done: ret=0 az=54.915<-3661 ze=115.11<-4326 Statuses=0009 0009 05:04:10 Msec=1500 True Az=54.915 Ze=115.11 Az status=0009 Ze status=0009 05:04:10 Check angles 05:04:10 SkyScan query 05:04:10 SkyScan query done: ret=0 az=41.01<-2734 ze=93.69<-5754 Statuses=0009 0009 05:04:10 Msec=2250 True Az=41.01 Ze=93.69 Az status=0009 Ze status=0009 05:04:11 Check angles 05:04:11 SkyScan query 05:04:11 SkyScan query done: ret=0 az=40.995<-2733 ze=72.705<-7153 Statuses=0008 0009 05:04:11 Msec=3000 True Az=40.995 Ze=72.705 Az status=0008 Ze status=0009 05:04:11 Check angles 05:04:11 SkyScan query 05:04:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 05:04:12 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 05:04:12 Check angles 05:04:12 SkyScan query 05:04:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:04:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:04:13 Message to Master queued w/err=0: serial=210342 error=0 05:04:18 Received message from Master: op=Filter serial=210343 05:04:18 Color wheel filter change from 0 to 0 05:04:18 FLIGetFilterPos err=0 currentPosition=0 05:04:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:18 Filter is already there-color wheel unchanged 05:04:18 Received message from Master: op=Shutter serial=210344 05:04:18 Shutter LASER close 05:04:18 Received message from Camera: op=State serial=210346 05:04:18 GetSingleValue result=40 Value=cccccccc 05:04:18 SkyScan query 05:04:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:04:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:19 Parameters OK 05:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:19 Set A/D data flow result=40 05:04:19 Set A/D channel type result=40 05:04:19 Set A/D encoding result=40 05:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:19 Set channel filter=0.000000e+000 result=40 05:04:19 Config A/D Result=40 05:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:19 Get A/D filter: -9.255963e+061 result=40 05:04:19 Get A/D value=-858993460 result=40 05:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:19 Parameters OK 05:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:19 Set A/D data flow result=40 05:04:19 Set A/D channel type result=40 05:04:19 Set A/D encoding result=40 05:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:19 Set channel filter=0.000000e+000 result=40 05:04:19 Config A/D Result=40 05:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:19 Get A/D filter: -9.255963e+061 result=40 05:04:19 Get A/D value=-858993460 result=40 05:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:19 Aux= 05:04:19 Message to Camera, serial 210346 queued 05:04:56 Received message from Master: op=PointingHead serial=210359 05:04:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:04:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:04:56 Point started: ret=0 05:04:56 point_skyscan result=0 05:04:57 Check angles 05:04:57 SkyScan query 05:04:57 SkyScan query done: ret=0 az=40.98<-2732 ze=21.795<-10547 Statuses=0008 0009 05:04:57 Msec=0 True Az=40.98 Ze=21.795 Az status=0008 Ze status=0009 05:04:57 Check angles 05:04:57 SkyScan query 05:04:58 SkyScan query done: ret=0 az=40.98<-2732 ze=0.84<-11944 Statuses=0008 0009 05:04:58 Msec=750 True Az=40.98 Ze=0.84 Az status=0008 Ze status=0009 05:04:58 Check angles 05:04:58 SkyScan query 05:04:59 SkyScan query done: ret=0 az=40.98<-2732 ze=-20.1<-13340 Statuses=0008 0009 05:04:59 Msec=1500 True Az=40.98 Ze=-20.1 Az status=0008 Ze status=0009 05:04:59 Check angles 05:04:59 SkyScan query 05:05:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 05:05:00 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 05:05:00 Check angles 05:05:00 SkyScan query 05:05:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:05:00 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:05:00 Message to Master queued w/err=0: serial=210359 error=0 05:05:05 Received message from Master: op=Filter serial=210360 05:05:05 Color wheel filter change from 0 to 0 05:05:05 FLIGetFilterPos err=0 currentPosition=0 05:05:05 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:05 Filter is already there-color wheel unchanged 05:05:05 Received message from Master: op=Shutter serial=210361 05:05:05 Shutter LASER close 05:05:05 Received message from Camera: op=State serial=210363 05:05:05 GetSingleValue result=40 Value=cccccccc 05:05:05 SkyScan query 05:05:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:05:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:06 Parameters OK 05:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:06 Set A/D data flow result=40 05:05:06 Set A/D channel type result=40 05:05:06 Set A/D encoding result=40 05:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:06 Set channel filter=0.000000e+000 result=40 05:05:06 Config A/D Result=40 05:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:06 Get A/D filter: -9.255963e+061 result=40 05:05:06 Get A/D value=-858993460 result=40 05:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:06 Parameters OK 05:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:06 Set A/D data flow result=40 05:05:06 Set A/D channel type result=40 05:05:06 Set A/D encoding result=40 05:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:06 Set channel filter=0.000000e+000 result=40 05:05:06 Config A/D Result=40 05:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:06 Get A/D filter: -9.255963e+061 result=40 05:05:06 Get A/D value=-858993460 result=40 05:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:06 Aux= 05:05:06 Message to Camera, serial 210363 queued 05:05:43 Received message from Master: op=PointingHead serial=210376 05:05:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:05:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:05:43 Point started: ret=0 05:05:43 point_skyscan result=0 05:05:44 Check angles 05:05:44 SkyScan query 05:05:45 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.715<-16581 Statuses=0009 0009 05:05:45 Msec=0 True Az=64.425 Ze=-68.715 Az status=0009 Ze status=0009 05:05:45 Check angles 05:05:45 SkyScan query 05:05:45 SkyScan query done: ret=0 az=82.02<-5468 ze=-89.685<-17979 Statuses=0009 0009 05:05:45 Msec=750 True Az=82.02 Ze=-89.685 Az status=0009 Ze status=0009 05:05:46 Check angles 05:05:46 SkyScan query 05:05:46 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.67<-19378 Statuses=0009 0009 05:05:46 Msec=1500 True Az=99.435 Ze=-110.67 Az status=0009 Ze status=0009 05:05:46 Check angles 05:05:46 SkyScan query 05:05:47 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.58<-20772 Statuses=0009 0009 05:05:47 Msec=2250 True Az=116.775 Ze=-131.58 Az status=0009 Ze status=0009 [UTC 2018-12-17 05:05:47] 05:05:47 Check angles 05:05:47 SkyScan query 05:05:48 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 05:05:48 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 05:05:48 Check angles 05:05:48 SkyScan query 05:05:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:05:48 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:05:48 Message to Master queued w/err=0: serial=210376 error=0 05:05:53 Received message from Master: op=Filter serial=210377 05:05:53 Color wheel filter change from 0 to 0 05:05:53 FLIGetFilterPos err=0 currentPosition=0 05:05:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:53 Filter is already there-color wheel unchanged 05:05:54 Received message from Master: op=Shutter serial=210378 05:05:54 Shutter LASER close 05:05:54 Received message from Camera: op=State serial=210380 05:05:54 GetSingleValue result=40 Value=cccccccc 05:05:54 SkyScan query 05:05:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:05:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:54 Parameters OK 05:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:54 Set A/D data flow result=40 05:05:54 Set A/D channel type result=40 05:05:54 Set A/D encoding result=40 05:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:54 Set channel filter=0.000000e+000 result=40 05:05:54 Config A/D Result=40 05:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:54 Get A/D filter: -9.255963e+061 result=40 05:05:54 Get A/D value=-858993460 result=40 05:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:54 Parameters OK 05:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:54 Set A/D data flow result=40 05:05:54 Set A/D channel type result=40 05:05:54 Set A/D encoding result=40 05:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:54 Set channel filter=0.000000e+000 result=40 05:05:54 Config A/D Result=40 05:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:54 Get A/D filter: -9.255963e+061 result=40 05:05:54 Get A/D value=-858993460 result=40 05:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:54 Aux= 05:05:54 Message to Camera, serial 210380 queued 05:06:31 Received message from Master: op=PointingHead serial=210393 05:06:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:06:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:06:31 Point started: ret=0 05:06:31 point_skyscan result=0 05:06:32 Check angles 05:06:32 SkyScan query 05:06:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 05:06:33 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 05:06:33 Check angles 05:06:33 SkyScan query 05:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:06:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:06:33 Message to Master queued w/err=0: serial=210393 error=0 05:06:38 Received message from Master: op=Filter serial=210394 05:06:38 Color wheel filter change from 0 to 0 05:06:38 FLIGetFilterPos err=0 currentPosition=0 05:06:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:38 Filter is already there-color wheel unchanged 05:06:39 Received message from Master: op=Shutter serial=210395 05:06:39 Shutter LASER open 05:06:39 Received message from Camera: op=State serial=210397 05:06:39 GetSingleValue result=40 Value=cccccccc 05:06:39 SkyScan query 05:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:06:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:39 Parameters OK 05:06:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:39 Set A/D data flow result=40 05:06:39 Set A/D channel type result=40 05:06:39 Set A/D encoding result=40 05:06:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:39 Set channel filter=0.000000e+000 result=40 05:06:39 Config A/D Result=40 05:06:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:39 Get A/D filter: -9.255963e+061 result=40 05:06:39 Get A/D value=-858993460 result=40 05:06:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:39 Parameters OK 05:06:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:39 Set A/D data flow result=40 05:06:39 Set A/D channel type result=40 05:06:39 Set A/D encoding result=40 05:06:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:39 Set channel filter=0.000000e+000 result=40 05:06:39 Config A/D Result=40 05:06:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:39 Get A/D filter: -9.255963e+061 result=40 05:06:39 Get A/D value=-858993460 result=40 05:06:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:39 Aux= 05:06:39 Message to Camera, serial 210397 queued 05:06:48 Received message from Master: op=Shutter serial=210407 05:06:48 Shutter LASER close 05:06:48 Received message from Master: op=PointingHead serial=210411 05:06:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:06:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:06:49 Point started: ret=0 05:06:49 point_skyscan result=0 05:06:49 Check angles 05:06:49 SkyScan query 05:06:50 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.235<-21549 Statuses=0009 0009 05:06:50 Msec=0 True Az=135.99 Ze=-143.235 Az status=0009 Ze status=0009 05:06:50 Check angles 05:06:50 SkyScan query 05:06:51 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.22<-20148 Statuses=0009 0009 05:06:51 Msec=750 True Az=153.495 Ze=-122.22 Az status=0009 Ze status=0009 05:06:51 Check angles 05:06:51 SkyScan query 05:06:52 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.355<-18757 Statuses=0009 0009 05:06:52 Msec=1500 True Az=170.955 Ze=-101.355 Az status=0009 Ze status=0009 05:06:52 Check angles 05:06:52 SkyScan query 05:06:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.355<-17357 Statuses=0008 0009 05:06:52 Msec=2250 True Az=175.995 Ze=-80.355 Az status=0008 Ze status=0009 05:06:52 Check angles 05:06:52 SkyScan query 05:06:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.37<-15958 Statuses=0008 0009 05:06:53 Msec=3000 True Az=175.995 Ze=-59.37 Az status=0008 Ze status=0009 05:06:53 Check angles 05:06:53 SkyScan query 05:06:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:06:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:06:54 Message to Master queued w/err=0: serial=210411 error=0 05:06:59 Received message from Master: op=Filter serial=210412 05:06:59 Color wheel filter change from 0 to 0 05:06:59 FLIGetFilterPos err=0 currentPosition=0 05:06:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:59 Filter is already there-color wheel unchanged 05:06:59 Received message from Master: op=Shutter serial=210413 05:06:59 Shutter LASER close 05:06:59 Received message from Camera: op=State serial=210415 05:06:59 GetSingleValue result=40 Value=cccccccc 05:06:59 SkyScan query 05:07:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:07:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:00 Parameters OK 05:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:00 Set A/D data flow result=40 05:07:00 Set A/D channel type result=40 05:07:00 Set A/D encoding result=40 05:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:00 Set channel filter=0.000000e+000 result=40 05:07:00 Config A/D Result=40 05:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:00 Get A/D filter: -9.255963e+061 result=40 05:07:00 Get A/D value=-858993460 result=40 05:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:00 Parameters OK 05:07:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:00 Set A/D data flow result=40 05:07:00 Set A/D channel type result=40 05:07:00 Set A/D encoding result=40 05:07:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:00 Set channel filter=0.000000e+000 result=40 05:07:00 Config A/D Result=40 05:07:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:00 Get A/D filter: -9.255963e+061 result=40 05:07:00 Get A/D value=-858993460 result=40 05:07:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:00 Aux= 05:07:00 Message to Camera, serial 210415 queued 05:07:37 Received message from Master: op=PointingHead serial=210428 05:07:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:07:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:07:37 Point started: ret=0 05:07:37 point_skyscan result=0 05:07:38 Check angles 05:07:38 SkyScan query 05:07:38 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.81<-13454 Statuses=0009 0009 05:07:38 Msec=0 True Az=152.925 Ze=-21.81 Az status=0009 Ze status=0009 05:07:38 Check angles 05:07:38 SkyScan query 05:07:39 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.39<-12026 Statuses=0009 0009 05:07:39 Msec=750 True Az=135.255 Ze=-0.39 Az status=0009 Ze status=0009 05:07:39 Check angles 05:07:39 SkyScan query 05:07:40 SkyScan query done: ret=0 az=117.33<-7822 ze=21.045<-10597 Statuses=0009 0009 05:07:40 Msec=1500 True Az=117.33 Ze=21.045 Az status=0009 Ze status=0009 05:07:40 Check angles 05:07:40 SkyScan query 05:07:40 SkyScan query done: ret=0 az=99.99<-6666 ze=41.94<-9204 Statuses=0009 0009 05:07:40 Msec=2250 True Az=99.99 Ze=41.94 Az status=0009 Ze status=0009 05:07:41 Check angles 05:07:41 SkyScan query 05:07:41 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 05:07:41 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 05:07:41 Check angles 05:07:41 SkyScan query 05:07:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:07:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:07:42 Message to Master queued w/err=0: serial=210428 error=0 05:07:47 Received message from Master: op=Filter serial=210429 05:07:47 Color wheel filter change from 0 to 0 05:07:47 FLIGetFilterPos err=0 currentPosition=0 05:07:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:47 Filter is already there-color wheel unchanged 05:07:47 Received message from Master: op=Shutter serial=210430 05:07:47 Shutter LASER close 05:07:47 Received message from Camera: op=State serial=210432 05:07:47 GetSingleValue result=40 Value=cccccccc 05:07:47 SkyScan query 05:07:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:07:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:48 Parameters OK 05:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:48 Set A/D data flow result=40 05:07:48 Set A/D channel type result=40 05:07:48 Set A/D encoding result=40 05:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:48 Set channel filter=0.000000e+000 result=40 05:07:48 Config A/D Result=40 05:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:48 Get A/D filter: -9.255963e+061 result=40 05:07:48 Get A/D value=-858993460 result=40 05:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:48 Parameters OK 05:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:48 Set A/D data flow result=40 05:07:48 Set A/D channel type result=40 05:07:48 Set A/D encoding result=40 05:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:48 Set channel filter=0.000000e+000 result=40 05:07:48 Config A/D Result=40 05:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:48 Get A/D filter: -9.255963e+061 result=40 05:07:48 Get A/D value=-858993460 result=40 05:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:48 Aux= 05:07:48 Message to Camera, serial 210432 queued 05:08:25 Received message from Master: op=PointingHead serial=210445 05:08:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:08:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:08:25 Point started: ret=0 05:08:25 point_skyscan result=0 05:08:26 Check angles 05:08:26 SkyScan query 05:08:26 SkyScan query done: ret=0 az=85.995<-5733 ze=21.87<-10542 Statuses=0008 0009 05:08:26 Msec=0 True Az=85.995 Ze=21.87 Az status=0008 Ze status=0009 05:08:27 Check angles 05:08:27 SkyScan query 05:08:27 SkyScan query done: ret=0 az=85.995<-5733 ze=0.945<-11937 Statuses=0008 0009 05:08:27 Msec=750 True Az=85.995 Ze=0.945 Az status=0008 Ze status=0009 05:08:27 Check angles 05:08:27 SkyScan query 05:08:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.025<-13335 Statuses=0008 0009 05:08:28 Msec=1500 True Az=85.995 Ze=-20.025 Az status=0008 Ze status=0009 05:08:28 Check angles 05:08:28 SkyScan query 05:08:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.965<-14731 Statuses=0008 0009 05:08:29 Msec=2250 True Az=85.995 Ze=-40.965 Az status=0008 Ze status=0009 05:08:29 Check angles 05:08:29 SkyScan query 05:08:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:08:29 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:08:29 Message to Master queued w/err=0: serial=210445 error=0 05:08:34 Received message from Master: op=Filter serial=210446 05:08:34 Color wheel filter change from 0 to 0 05:08:34 FLIGetFilterPos err=0 currentPosition=0 05:08:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:34 Filter is already there-color wheel unchanged 05:08:35 Received message from Master: op=Shutter serial=210447 05:08:35 Shutter LASER close 05:08:35 Received message from Camera: op=State serial=210449 05:08:35 GetSingleValue result=40 Value=cccccccc 05:08:35 SkyScan query 05:08:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:08:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:35 Parameters OK 05:08:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:35 Set A/D data flow result=40 05:08:35 Set A/D channel type result=40 05:08:35 Set A/D encoding result=40 05:08:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:35 Set channel filter=0.000000e+000 result=40 05:08:35 Config A/D Result=40 05:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:35 Get A/D filter: -9.255963e+061 result=40 05:08:35 Get A/D value=-858993460 result=40 05:08:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:35 Parameters OK 05:08:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:35 Set A/D data flow result=40 05:08:35 Set A/D channel type result=40 05:08:35 Set A/D encoding result=40 05:08:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:35 Set channel filter=0.000000e+000 result=40 05:08:35 Config A/D Result=40 05:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:35 Get A/D filter: -9.255963e+061 result=40 05:08:35 Get A/D value=-858993460 result=40 05:08:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:35 Aux= 05:08:35 Message to Camera, serial 210449 queued 05:09:11 Received message from Master: op=PointingHead serial=210461 05:09:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:09:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:09:11 Point started: ret=0 05:09:11 point_skyscan result=0 05:09:12 Check angles 05:09:12 SkyScan query 05:09:13 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.345<-17423 Statuses=0009 0009 05:09:13 Msec=0 True Az=109.11 Ze=-81.345 Az status=0009 Ze status=0009 05:09:13 Check angles 05:09:13 SkyScan query 05:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 05:09:14 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 05:09:14 Check angles 05:09:14 SkyScan query 05:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 05:09:14 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 05:09:14 Check angles 05:09:14 SkyScan query 05:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.21<-21614 Statuses=0008 0009 05:09:15 Msec=2250 True Az=112.995 Ze=-144.21 Az status=0008 Ze status=0009 05:09:15 Check angles 05:09:15 SkyScan query 05:09:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.165<-23011 Statuses=0008 0009 05:09:16 Msec=3000 True Az=112.995 Ze=-165.165 Az status=0008 Ze status=0009 05:09:16 Check angles 05:09:16 SkyScan query 05:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:09:17 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:09:17 Message to Master queued w/err=0: serial=210461 error=0 05:09:22 Received message from Master: op=Filter serial=210462 05:09:22 Color wheel filter change from 0 to 0 05:09:22 FLIGetFilterPos err=0 currentPosition=0 05:09:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:22 Filter is already there-color wheel unchanged 05:09:22 Received message from Master: op=Shutter serial=210463 05:09:22 Shutter LASER open 05:09:22 Received message from Camera: op=State serial=210465 05:09:22 GetSingleValue result=40 Value=cccccccc 05:09:22 SkyScan query 05:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:09:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:23 Parameters OK 05:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:23 Set A/D data flow result=40 05:09:23 Set A/D channel type result=40 05:09:23 Set A/D encoding result=40 05:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:23 Set channel filter=0.000000e+000 result=40 05:09:23 Config A/D Result=40 05:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:23 Get A/D filter: -9.255963e+061 result=40 05:09:23 Get A/D value=-858993460 result=40 05:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:23 Parameters OK 05:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:23 Set A/D data flow result=40 05:09:23 Set A/D channel type result=40 05:09:23 Set A/D encoding result=40 05:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:23 Set channel filter=0.000000e+000 result=40 05:09:23 Config A/D Result=40 05:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:23 Get A/D filter: -9.255963e+061 result=40 05:09:23 Get A/D value=-858993460 result=40 05:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:23 Aux= 05:09:23 Message to Camera, serial 210465 queued 05:09:31 Received message from Master: op=Shutter serial=210475 05:09:31 Shutter LASER close 05:09:31 Received message from Master: op=PointingHead serial=210479 05:09:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:09:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:09:32 Point started: ret=0 05:09:32 point_skyscan result=0 05:09:33 Check angles 05:09:33 SkyScan query 05:09:33 SkyScan query done: ret=0 az=89.61<-5974 ze=156.84<-1544 Statuses=0009 0009 05:09:33 Msec=0 True Az=89.61 Ze=156.84 Az status=0009 Ze status=0009 05:09:33 Check angles 05:09:33 SkyScan query 05:09:34 SkyScan query done: ret=0 az=72.045<-4803 ze=135.945<-2937 Statuses=0009 0009 05:09:34 Msec=750 True Az=72.045 Ze=135.945 Az status=0009 Ze status=0009 05:09:34 Check angles 05:09:34 SkyScan query 05:09:35 SkyScan query done: ret=0 az=54.78<-3652 ze=114.99<-4334 Statuses=0009 0009 05:09:35 Msec=1500 True Az=54.78 Ze=114.99 Az status=0009 Ze status=0009 05:09:35 Check angles 05:09:35 SkyScan query 05:09:35 SkyScan query done: ret=0 az=41.025<-2735 ze=94.05<-5730 Statuses=0009 0009 05:09:35 Msec=2250 True Az=41.025 Ze=94.05 Az status=0009 Ze status=0009 05:09:36 Check angles 05:09:36 SkyScan query 05:09:36 SkyScan query done: ret=0 az=40.98<-2732 ze=73.02<-7132 Statuses=0008 0009 05:09:36 Msec=3000 True Az=40.98 Ze=73.02 Az status=0008 Ze status=0009 05:09:36 Check angles 05:09:36 SkyScan query 05:09:37 SkyScan query done: ret=0 az=40.98<-2732 ze=52.635<-8491 Statuses=0008 0009 05:09:37 Msec=3750 True Az=40.98 Ze=52.635 Az status=0008 Ze status=0009 05:09:37 Check angles 05:09:37 SkyScan query 05:09:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:09:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:09:38 Message to Master queued w/err=0: serial=210479 error=0 05:09:43 Received message from Master: op=Filter serial=210480 05:09:43 Color wheel filter change from 0 to 0 05:09:43 FLIGetFilterPos err=0 currentPosition=0 05:09:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:43 Filter is already there-color wheel unchanged 05:09:43 Received message from Master: op=Shutter serial=210481 05:09:43 Shutter LASER close 05:09:43 Received message from Camera: op=State serial=210483 05:09:43 GetSingleValue result=40 Value=cccccccc 05:09:43 SkyScan query 05:09:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:09:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:44 Parameters OK 05:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:44 Set A/D data flow result=40 05:09:44 Set A/D channel type result=40 05:09:44 Set A/D encoding result=40 05:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:44 Set channel filter=0.000000e+000 result=40 05:09:44 Config A/D Result=40 05:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:44 Get A/D filter: -9.255963e+061 result=40 05:09:44 Get A/D value=-858993460 result=40 05:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:44 Parameters OK 05:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:44 Set A/D data flow result=40 05:09:44 Set A/D channel type result=40 05:09:44 Set A/D encoding result=40 05:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:44 Set channel filter=0.000000e+000 result=40 05:09:44 Config A/D Result=40 05:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:44 Get A/D filter: -9.255963e+061 result=40 05:09:44 Get A/D value=-858993460 result=40 05:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:44 Aux= 05:09:44 Message to Camera, serial 210483 queued 05:10:20 Received message from Master: op=PointingHead serial=210496 05:10:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:10:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:10:21 Point started: ret=0 05:10:21 point_skyscan result=0 05:10:22 Check angles 05:10:22 SkyScan query 05:10:22 SkyScan query done: ret=0 az=40.995<-2733 ze=21.72<-10552 Statuses=0008 0009 05:10:22 Msec=0 True Az=40.995 Ze=21.72 Az status=0008 Ze status=0009 05:10:22 Check angles 05:10:22 SkyScan query 05:10:23 SkyScan query done: ret=0 az=40.995<-2733 ze=0.765<-11949 Statuses=0008 0009 05:10:23 Msec=750 True Az=40.995 Ze=0.765 Az status=0008 Ze status=0009 05:10:23 Check angles 05:10:23 SkyScan query 05:10:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.19<-13346 Statuses=0008 0009 05:10:24 Msec=1500 True Az=40.995 Ze=-20.19 Az status=0008 Ze status=0009 05:10:24 Check angles 05:10:24 SkyScan query 05:10:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 05:10:24 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 05:10:25 Check angles 05:10:25 SkyScan query 05:10:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 05:10:25 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 05:10:25 Message to Master queued w/err=0: serial=210496 error=0 05:10:30 Received message from Master: op=Filter serial=210497 05:10:30 Color wheel filter change from 0 to 0 05:10:30 FLIGetFilterPos err=0 currentPosition=0 05:10:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:30 Filter is already there-color wheel unchanged 05:10:30 Received message from Master: op=Shutter serial=210498 05:10:30 Shutter LASER close 05:10:30 Received message from Camera: op=State serial=210500 05:10:30 GetSingleValue result=40 Value=cccccccc 05:10:30 SkyScan query 05:10:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:10:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:31 Parameters OK 05:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:31 Set A/D data flow result=40 05:10:31 Set A/D channel type result=40 05:10:31 Set A/D encoding result=40 05:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:31 Set channel filter=0.000000e+000 result=40 05:10:31 Config A/D Result=40 05:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:31 Get A/D filter: -9.255963e+061 result=40 05:10:31 Get A/D value=-858993460 result=40 05:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:31 Parameters OK 05:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:31 Set A/D data flow result=40 05:10:31 Set A/D channel type result=40 05:10:31 Set A/D encoding result=40 05:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:31 Set channel filter=0.000000e+000 result=40 05:10:31 Config A/D Result=40 05:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:31 Get A/D filter: -9.255963e+061 result=40 05:10:31 Get A/D value=-858993460 result=40 05:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:31 Aux= 05:10:31 Message to Camera, serial 210500 queued 05:11:08 Received message from Master: op=PointingHead serial=210513 05:11:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:11:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:11:08 Point started: ret=0 05:11:08 point_skyscan result=0 05:11:09 Check angles 05:11:09 SkyScan query 05:11:09 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.13<-16542 Statuses=0009 0009 05:11:09 Msec=0 True Az=63.975 Ze=-68.13 Az status=0009 Ze status=0009 05:11:10 Check angles 05:11:10 SkyScan query 05:11:10 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.115<-17941 Statuses=0009 0009 05:11:10 Msec=750 True Az=81.345 Ze=-89.115 Az status=0009 Ze status=0009 05:11:10 Check angles 05:11:10 SkyScan query 05:11:11 SkyScan query done: ret=0 az=98.925<-6595 ze=-109.995<-19333 Statuses=0009 0009 05:11:11 Msec=1500 True Az=98.925 Ze=-109.995 Az status=0009 Ze status=0009 05:11:11 Check angles 05:11:11 SkyScan query 05:11:12 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.43<-20762 Statuses=0009 0009 05:11:12 Msec=2250 True Az=116.775 Ze=-131.43 Az status=0009 Ze status=0009 05:11:12 Check angles 05:11:12 SkyScan query 05:11:12 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 05:11:12 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 05:11:13 Check angles 05:11:13 SkyScan query 05:11:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 05:11:13 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 05:11:13 Message to Master queued w/err=0: serial=210513 error=0 05:11:18 Received message from Master: op=Filter serial=210514 05:11:18 Color wheel filter change from 0 to 0 05:11:18 FLIGetFilterPos err=0 currentPosition=0 05:11:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:18 Filter is already there-color wheel unchanged 05:11:18 Received message from Master: op=Shutter serial=210515 05:11:18 Shutter LASER close 05:11:18 Received message from Camera: op=State serial=210517 05:11:18 GetSingleValue result=40 Value=cccccccc 05:11:18 SkyScan query 05:11:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:11:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:19 Parameters OK 05:11:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:19 Set A/D data flow result=40 05:11:19 Set A/D channel type result=40 05:11:19 Set A/D encoding result=40 05:11:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:19 Set channel filter=0.000000e+000 result=40 05:11:19 Config A/D Result=40 05:11:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:19 Get A/D filter: -9.255963e+061 result=40 05:11:19 Get A/D value=-858993460 result=40 05:11:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:19 Parameters OK 05:11:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:19 Set A/D data flow result=40 05:11:19 Set A/D channel type result=40 05:11:19 Set A/D encoding result=40 05:11:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:19 Set channel filter=0.000000e+000 result=40 05:11:19 Config A/D Result=40 05:11:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:19 Get A/D filter: -9.255963e+061 result=40 05:11:19 Get A/D value=-858993460 result=40 05:11:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:19 Aux= 05:11:19 Message to Camera, serial 210517 queued 05:11:56 Received message from Master: op=PointingHead serial=210530 05:11:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:11:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:11:56 Point started: ret=0 05:11:56 point_skyscan result=0 05:11:57 Check angles 05:11:57 SkyScan query 05:11:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 05:11:57 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 05:11:58 Check angles 05:11:58 SkyScan query 05:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:11:58 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:11:58 Message to Master queued w/err=0: serial=210530 error=0 05:12:03 Received message from Master: op=Filter serial=210531 05:12:03 Color wheel filter change from 0 to 0 05:12:03 FLIGetFilterPos err=0 currentPosition=0 05:12:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:03 Filter is already there-color wheel unchanged 05:12:03 Received message from Master: op=Shutter serial=210532 05:12:03 Shutter LASER open 05:12:04 Received message from Camera: op=State serial=210534 05:12:04 GetSingleValue result=40 Value=cccccccc 05:12:04 SkyScan query 05:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:04 Parameters OK 05:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:04 Set A/D data flow result=40 05:12:04 Set A/D channel type result=40 05:12:04 Set A/D encoding result=40 05:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:04 Set channel filter=0.000000e+000 result=40 05:12:04 Config A/D Result=40 05:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:04 Get A/D filter: -9.255963e+061 result=40 05:12:04 Get A/D value=-858993460 result=40 05:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:04 Parameters OK 05:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:04 Set A/D data flow result=40 05:12:04 Set A/D channel type result=40 05:12:04 Set A/D encoding result=40 05:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:04 Set channel filter=0.000000e+000 result=40 05:12:04 Config A/D Result=40 05:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:04 Get A/D filter: -9.255963e+061 result=40 05:12:04 Get A/D value=-858993460 result=40 05:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:04 Aux= 05:12:04 Message to Camera, serial 210534 queued 05:12:13 Received message from Master: op=Shutter serial=210544 05:12:13 Shutter LASER close 05:12:13 Received message from Master: op=PointingHead serial=210548 05:12:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:12:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:12:14 Point started: ret=0 05:12:14 point_skyscan result=0 05:12:14 Check angles 05:12:14 SkyScan query 05:12:15 SkyScan query done: ret=0 az=135.795<-9053 ze=-143.46<-21564 Statuses=0009 0009 05:12:15 Msec=0 True Az=135.795 Ze=-143.46 Az status=0009 Ze status=0009 05:12:15 Check angles 05:12:15 SkyScan query 05:12:16 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.46<-20164 Statuses=0009 0009 05:12:16 Msec=750 True Az=153.33 Ze=-122.46 Az status=0009 Ze status=0009 05:12:16 Check angles 05:12:16 SkyScan query 05:12:16 SkyScan query done: ret=0 az=170.82<-11388 ze=-101.58<-18772 Statuses=0009 0009 05:12:16 Msec=1500 True Az=170.82 Ze=-101.58 Az status=0009 Ze status=0009 05:12:17 Check angles 05:12:17 SkyScan query 05:12:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.55<-17370 Statuses=0008 0009 05:12:17 Msec=2250 True Az=175.995 Ze=-80.55 Az status=0008 Ze status=0009 05:12:17 Check angles 05:12:17 SkyScan query 05:12:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.19<-15946 Statuses=0008 0009 05:12:18 Msec=3000 True Az=175.995 Ze=-59.19 Az status=0008 Ze status=0009 05:12:18 Check angles 05:12:18 SkyScan query 05:12:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:12:19 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:12:19 Message to Master queued w/err=0: serial=210548 error=0 05:12:24 Received message from Master: op=Filter serial=210549 05:12:24 Color wheel filter change from 0 to 0 05:12:24 FLIGetFilterPos err=0 currentPosition=0 05:12:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:24 Filter is already there-color wheel unchanged 05:12:24 Received message from Master: op=Shutter serial=210550 05:12:24 Shutter LASER close 05:12:24 Received message from Camera: op=State serial=210552 05:12:24 GetSingleValue result=40 Value=cccccccc 05:12:24 SkyScan query 05:12:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:12:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:25 Parameters OK 05:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:25 Set A/D data flow result=40 05:12:25 Set A/D channel type result=40 05:12:25 Set A/D encoding result=40 05:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:25 Set channel filter=0.000000e+000 result=40 05:12:25 Config A/D Result=40 05:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:25 Get A/D filter: -9.255963e+061 result=40 05:12:25 Get A/D value=-858993460 result=40 05:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:25 Parameters OK 05:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:25 Set A/D data flow result=40 05:12:25 Set A/D channel type result=40 05:12:25 Set A/D encoding result=40 05:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:25 Set channel filter=0.000000e+000 result=40 05:12:25 Config A/D Result=40 05:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:25 Get A/D filter: -9.255963e+061 result=40 05:12:25 Get A/D value=-858993460 result=40 05:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:25 Aux= 05:12:25 Message to Camera, serial 210552 queued 05:13:01 Received message from Master: op=PointingHead serial=210565 05:13:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:13:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:13:02 Point started: ret=0 05:13:02 point_skyscan result=0 05:13:02 Check angles 05:13:02 SkyScan query 05:13:03 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.065<-13471 Statuses=0009 0009 05:13:03 Msec=0 True Az=153.195 Ze=-22.065 Az status=0009 Ze status=0009 05:13:03 Check angles 05:13:03 SkyScan query 05:13:04 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.63<-12042 Statuses=0009 0009 05:13:04 Msec=750 True Az=135.39 Ze=-0.63 Az status=0009 Ze status=0009 05:13:04 Check angles 05:13:04 SkyScan query 05:13:05 SkyScan query done: ret=0 az=117.765<-7851 ze=20.265<-10649 Statuses=0009 0009 05:13:05 Msec=1500 True Az=117.765 Ze=20.265 Az status=0009 Ze status=0009 05:13:05 Check angles 05:13:05 SkyScan query 05:13:05 SkyScan query done: ret=0 az=100.395<-6693 ze=41.28<-9248 Statuses=0009 0009 05:13:05 Msec=2250 True Az=100.395 Ze=41.28 Az status=0009 Ze status=0009 05:13:05 Check angles 05:13:05 SkyScan query 05:13:06 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 05:13:06 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 05:13:06 Check angles 05:13:06 SkyScan query 05:13:07 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 05:13:07 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 05:13:07 Message to Master queued w/err=0: serial=210565 error=0 05:13:12 Received message from Master: op=Filter serial=210566 05:13:12 Color wheel filter change from 0 to 0 05:13:12 FLIGetFilterPos err=0 currentPosition=0 05:13:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:12 Filter is already there-color wheel unchanged 05:13:12 Received message from Master: op=Shutter serial=210567 05:13:12 Shutter LASER close 05:13:12 Received message from Camera: op=State serial=210569 05:13:12 GetSingleValue result=40 Value=cccccccc 05:13:12 SkyScan query 05:13:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:13:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:13 Parameters OK 05:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:13 Set A/D data flow result=40 05:13:13 Set A/D channel type result=40 05:13:13 Set A/D encoding result=40 05:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:13 Set channel filter=0.000000e+000 result=40 05:13:13 Config A/D Result=40 05:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:13 Get A/D filter: -9.255963e+061 result=40 05:13:13 Get A/D value=-858993460 result=40 05:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:13 Parameters OK 05:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:13 Set A/D data flow result=40 05:13:13 Set A/D channel type result=40 05:13:13 Set A/D encoding result=40 05:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:13 Set channel filter=0.000000e+000 result=40 05:13:13 Config A/D Result=40 05:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:13 Get A/D filter: -9.255963e+061 result=40 05:13:13 Get A/D value=-858993460 result=40 05:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:13 Aux= 05:13:13 Message to Camera, serial 210569 queued 05:13:49 Received message from Master: op=PointingHead serial=210581 05:13:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:13:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:13:49 Point started: ret=0 05:13:49 point_skyscan result=0 05:13:50 Check angles 05:13:50 SkyScan query 05:13:50 SkyScan query done: ret=0 az=85.995<-5733 ze=21.21<-10586 Statuses=0008 0009 05:13:50 Msec=0 True Az=85.995 Ze=21.21 Az status=0008 Ze status=0009 05:13:51 Check angles 05:13:51 SkyScan query 05:13:51 SkyScan query done: ret=0 az=86.01<-5734 ze=0.075<-11995 Statuses=0008 0009 05:13:51 Msec=750 True Az=86.01 Ze=0.075 Az status=0008 Ze status=0009 05:13:51 Check angles 05:13:51 SkyScan query 05:13:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.09<-13406 Statuses=0008 0009 05:13:52 Msec=1500 True Az=85.995 Ze=-21.09 Az status=0008 Ze status=0009 05:13:52 Check angles 05:13:52 SkyScan query 05:13:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.075<-14805 Statuses=0008 0009 05:13:53 Msec=2250 True Az=85.995 Ze=-42.075 Az status=0008 Ze status=0009 05:13:53 Check angles 05:13:53 SkyScan query 05:13:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:13:53 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:13:53 Message to Master queued w/err=0: serial=210581 error=0 05:13:58 Received message from Master: op=Filter serial=210582 05:13:58 Color wheel filter change from 0 to 0 05:13:58 FLIGetFilterPos err=0 currentPosition=0 05:13:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:58 Filter is already there-color wheel unchanged 05:13:59 Received message from Master: op=Shutter serial=210583 05:13:59 Shutter LASER close 05:13:59 Received message from Camera: op=State serial=210585 05:13:59 GetSingleValue result=40 Value=cccccccc 05:13:59 SkyScan query 05:13:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:13:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:59 Parameters OK 05:13:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:59 Set A/D data flow result=40 05:13:59 Set A/D channel type result=40 05:13:59 Set A/D encoding result=40 05:13:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:59 Set channel filter=0.000000e+000 result=40 05:13:59 Config A/D Result=40 05:13:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:59 Get A/D filter: -9.255963e+061 result=40 05:13:59 Get A/D value=-858993460 result=40 05:13:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:59 Parameters OK 05:13:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:59 Set A/D data flow result=40 05:13:59 Set A/D channel type result=40 05:13:59 Set A/D encoding result=40 05:13:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:59 Set channel filter=0.000000e+000 result=40 05:13:59 Config A/D Result=40 05:13:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:59 Get A/D filter: -9.255963e+061 result=40 05:13:59 Get A/D value=-858993460 result=40 05:13:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:59 Aux= 05:13:59 Message to Camera, serial 210585 queued 05:14:36 Received message from Master: op=PointingHead serial=210598 05:14:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:14:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:14:36 Point started: ret=0 05:14:36 point_skyscan result=0 05:14:37 Check angles 05:14:37 SkyScan query 05:14:38 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.63<-17442 Statuses=0009 0009 05:14:38 Msec=0 True Az=109.335 Ze=-81.63 Az status=0009 Ze status=0009 05:14:38 Check angles 05:14:38 SkyScan query 05:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 05:14:38 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 05:14:39 Check angles 05:14:39 SkyScan query 05:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.54<-20236 Statuses=0008 0009 05:14:39 Msec=1500 True Az=112.995 Ze=-123.54 Az status=0008 Ze status=0009 05:14:39 Check angles 05:14:39 SkyScan query 05:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.465<-21631 Statuses=0008 0009 05:14:40 Msec=2250 True Az=112.995 Ze=-144.465 Az status=0008 Ze status=0009 05:14:40 Check angles 05:14:40 SkyScan query 05:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 05:14:41 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 05:14:41 Check angles 05:14:41 SkyScan query 05:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:14:41 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:14:41 Message to Master queued w/err=0: serial=210598 error=0 05:14:46 Received message from Master: op=Filter serial=210599 05:14:46 Color wheel filter change from 0 to 0 05:14:46 FLIGetFilterPos err=0 currentPosition=0 05:14:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:46 Filter is already there-color wheel unchanged 05:14:47 Received message from Master: op=Shutter serial=210600 05:14:47 Shutter LASER open 05:14:47 Received message from Camera: op=State serial=210602 05:14:47 GetSingleValue result=40 Value=cccccccc 05:14:47 SkyScan query 05:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:14:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:47 Parameters OK 05:14:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:47 Set A/D data flow result=40 05:14:47 Set A/D channel type result=40 05:14:47 Set A/D encoding result=40 05:14:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:47 Set channel filter=0.000000e+000 result=40 05:14:47 Config A/D Result=40 05:14:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:47 Get A/D filter: -9.255963e+061 result=40 05:14:47 Get A/D value=-858993460 result=40 05:14:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:47 Parameters OK 05:14:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:47 Set A/D data flow result=40 05:14:47 Set A/D channel type result=40 05:14:47 Set A/D encoding result=40 05:14:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:47 Set channel filter=0.000000e+000 result=40 05:14:47 Config A/D Result=40 05:14:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:47 Get A/D filter: -9.255963e+061 result=40 05:14:47 Get A/D value=-858993460 result=40 05:14:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:47 Aux= 05:14:47 Message to Camera, serial 210602 queued 05:14:56 Received message from Master: op=Shutter serial=210612 05:14:56 Shutter LASER close 05:14:56 Received message from Master: op=PointingHead serial=210616 05:14:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:14:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:14:57 Point started: ret=0 05:14:57 point_skyscan result=0 05:14:57 Check angles 05:14:57 SkyScan query 05:14:58 SkyScan query done: ret=0 az=89.58<-5972 ze=156.84<-1544 Statuses=0009 0009 05:14:58 Msec=0 True Az=89.58 Ze=156.84 Az status=0009 Ze status=0009 05:14:58 Check angles 05:14:58 SkyScan query 05:14:59 SkyScan query done: ret=0 az=72.045<-4803 ze=135.885<-2941 Statuses=0009 0009 05:14:59 Msec=750 True Az=72.045 Ze=135.885 Az status=0009 Ze status=0009 05:14:59 Check angles 05:14:59 SkyScan query 05:14:59 SkyScan query done: ret=0 az=54.735<-3649 ze=114.93<-4338 Statuses=0009 0009 05:14:59 Msec=1500 True Az=54.735 Ze=114.93 Az status=0009 Ze status=0009 05:15:00 Check angles 05:15:00 SkyScan query 05:15:00 SkyScan query done: ret=0 az=40.995<-2733 ze=93.975<-5735 Statuses=0009 0009 05:15:00 Msec=2250 True Az=40.995 Ze=93.975 Az status=0009 Ze status=0009 05:15:00 Check angles 05:15:00 SkyScan query 05:15:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 05:15:01 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 05:15:01 Check angles 05:15:01 SkyScan query 05:15:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 05:15:02 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 05:15:02 Check angles 05:15:02 SkyScan query 05:15:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:15:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:15:02 Message to Master queued w/err=0: serial=210616 error=0 05:15:07 Received message from Master: op=Filter serial=210617 05:15:07 Color wheel filter change from 0 to 0 05:15:07 FLIGetFilterPos err=0 currentPosition=0 05:15:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:07 Filter is already there-color wheel unchanged 05:15:08 Received message from Master: op=Shutter serial=210618 05:15:08 Shutter LASER close 05:15:08 Received message from Camera: op=State serial=210620 05:15:08 GetSingleValue result=40 Value=cccccccc 05:15:08 SkyScan query 05:15:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:15:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:08 Parameters OK 05:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:08 Set A/D data flow result=40 05:15:08 Set A/D channel type result=40 05:15:08 Set A/D encoding result=40 05:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:08 Set channel filter=0.000000e+000 result=40 05:15:08 Config A/D Result=40 05:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:08 Get A/D filter: -9.255963e+061 result=40 05:15:08 Get A/D value=-858993460 result=40 05:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-17 05:15:08] 05:15:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:08 Parameters OK 05:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:08 Set A/D data flow result=40 05:15:08 Set A/D channel type result=40 05:15:08 Set A/D encoding result=40 05:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:08 Set channel filter=0.000000e+000 result=40 05:15:08 Config A/D Result=40 05:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:08 Get A/D filter: -9.255963e+061 result=40 05:15:08 Get A/D value=-858993460 result=40 05:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:08 Aux= 05:15:08 Message to Camera, serial 210620 queued 05:15:27 Received message from Master: op=Identify serial=210621 05:15:45 Received message from Master: op=PointingHead serial=210636 05:15:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:15:45 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:15:46 Point started: ret=0 05:15:46 point_skyscan result=0 05:15:46 Check angles 05:15:46 SkyScan query 05:15:47 SkyScan query done: ret=0 az=40.995<-2733 ze=21.84<-10544 Statuses=0008 0009 05:15:47 Msec=0 True Az=40.995 Ze=21.84 Az status=0008 Ze status=0009 05:15:47 Check angles 05:15:47 SkyScan query 05:15:48 SkyScan query done: ret=0 az=40.995<-2733 ze=0.885<-11941 Statuses=0008 0009 05:15:48 Msec=750 True Az=40.995 Ze=0.885 Az status=0008 Ze status=0009 05:15:48 Check angles 05:15:48 SkyScan query 05:15:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.505<-13367 Statuses=0008 0009 05:15:48 Msec=1500 True Az=40.995 Ze=-20.505 Az status=0008 Ze status=0009 05:15:49 Check angles 05:15:49 SkyScan query 05:15:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 05:15:49 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 05:15:49 Check angles 05:15:49 SkyScan query 05:15:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:15:50 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:15:50 Message to Master queued w/err=0: serial=210636 error=0 [UTC 2018-12-17 05:15:52] 05:15:55 Received message from Master: op=Filter serial=210637 05:15:55 Color wheel filter change from 0 to 0 05:15:55 FLIGetFilterPos err=0 currentPosition=0 05:15:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:55 Filter is already there-color wheel unchanged 05:15:55 Received message from Master: op=Shutter serial=210638 05:15:55 Shutter LASER close 05:15:55 Received message from Camera: op=State serial=210640 05:15:55 GetSingleValue result=40 Value=cccccccc 05:15:55 SkyScan query 05:15:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:15:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:56 Parameters OK 05:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:56 Set A/D data flow result=40 05:15:56 Set A/D channel type result=40 05:15:56 Set A/D encoding result=40 05:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:56 Set channel filter=0.000000e+000 result=40 05:15:56 Config A/D Result=40 05:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:56 Get A/D filter: -9.255963e+061 result=40 05:15:56 Get A/D value=-858993460 result=40 05:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:56 Parameters OK 05:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:56 Set A/D data flow result=40 05:15:56 Set A/D channel type result=40 05:15:56 Set A/D encoding result=40 05:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:56 Set channel filter=0.000000e+000 result=40 05:15:56 Config A/D Result=40 05:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:56 Get A/D filter: -9.255963e+061 result=40 05:15:56 Get A/D value=-858993460 result=40 05:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:56 Aux= 05:15:56 Message to Camera, serial 210640 queued 05:16:33 Received message from Master: op=PointingHead serial=210653 05:16:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:16:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:16:33 Point started: ret=0 05:16:33 point_skyscan result=0 05:16:34 Check angles 05:16:34 SkyScan query 05:16:34 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.385<-16559 Statuses=0009 0009 05:16:34 Msec=0 True Az=64.17 Ze=-68.385 Az status=0009 Ze status=0009 05:16:34 Check angles 05:16:34 SkyScan query 05:16:35 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.805<-17987 Statuses=0009 0009 05:16:35 Msec=750 True Az=82.08 Ze=-89.805 Az status=0009 Ze status=0009 05:16:35 Check angles 05:16:35 SkyScan query 05:16:36 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.775<-19385 Statuses=0009 0009 05:16:36 Msec=1500 True Az=99.585 Ze=-110.775 Az status=0009 Ze status=0009 05:16:36 Check angles 05:16:36 SkyScan query 05:16:37 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.7<-20780 Statuses=0009 0009 05:16:37 Msec=2250 True Az=117.03 Ze=-131.7 Az status=0009 Ze status=0009 05:16:37 Check angles 05:16:37 SkyScan query 05:16:37 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 05:16:37 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 05:16:37 Check angles 05:16:37 SkyScan query 05:16:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 05:16:38 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 05:16:38 Message to Master queued w/err=0: serial=210653 error=0 05:16:43 Received message from Master: op=Filter serial=210654 05:16:43 Color wheel filter change from 0 to 0 05:16:43 FLIGetFilterPos err=0 currentPosition=0 05:16:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:43 Filter is already there-color wheel unchanged 05:16:43 Received message from Master: op=Shutter serial=210655 05:16:43 Shutter LASER close 05:16:43 Received message from Camera: op=State serial=210657 05:16:43 GetSingleValue result=40 Value=cccccccc 05:16:43 SkyScan query 05:16:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:16:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:44 Parameters OK 05:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:44 Set A/D data flow result=40 05:16:44 Set A/D channel type result=40 05:16:44 Set A/D encoding result=40 05:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:44 Set channel filter=0.000000e+000 result=40 05:16:44 Config A/D Result=40 05:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:44 Get A/D filter: -9.255963e+061 result=40 05:16:44 Get A/D value=-858993460 result=40 05:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:44 Parameters OK 05:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:44 Set A/D data flow result=40 05:16:44 Set A/D channel type result=40 05:16:44 Set A/D encoding result=40 05:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:44 Set channel filter=0.000000e+000 result=40 05:16:44 Config A/D Result=40 05:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:44 Get A/D filter: -9.255963e+061 result=40 05:16:44 Get A/D value=-858993460 result=40 05:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:44 Aux= 05:16:44 Message to Camera, serial 210657 queued 05:17:21 Received message from Master: op=PointingHead serial=210670 05:17:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:17:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:17:21 Point started: ret=0 05:17:21 point_skyscan result=0 05:17:22 Check angles 05:17:22 SkyScan query 05:17:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0009 0009 05:17:22 Msec=0 True Az=112.995 Ze=-171.135 Az status=0009 Ze status=0009 05:17:23 Check angles 05:17:23 SkyScan query 05:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:17:23 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:17:23 Message to Master queued w/err=0: serial=210670 error=0 05:17:28 Received message from Master: op=Filter serial=210671 05:17:28 Color wheel filter change from 0 to 0 05:17:28 FLIGetFilterPos err=0 currentPosition=0 05:17:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:28 Filter is already there-color wheel unchanged 05:17:28 Received message from Master: op=Shutter serial=210672 05:17:28 Shutter LASER open 05:17:28 Received message from Camera: op=State serial=210674 05:17:28 GetSingleValue result=40 Value=cccccccc 05:17:28 SkyScan query 05:17:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:17:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:29 Parameters OK 05:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:29 Set A/D data flow result=40 05:17:29 Set A/D channel type result=40 05:17:29 Set A/D encoding result=40 05:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:29 Set channel filter=0.000000e+000 result=40 05:17:29 Config A/D Result=40 05:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:29 Get A/D filter: -9.255963e+061 result=40 05:17:29 Get A/D value=-858993460 result=40 05:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:29 Parameters OK 05:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:29 Set A/D data flow result=40 05:17:29 Set A/D channel type result=40 05:17:29 Set A/D encoding result=40 05:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:29 Set channel filter=0.000000e+000 result=40 05:17:29 Config A/D Result=40 05:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:29 Get A/D filter: -9.255963e+061 result=40 05:17:29 Get A/D value=-858993460 result=40 05:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:29 Aux= 05:17:29 Message to Camera, serial 210674 queued 05:17:37 Received message from Master: op=Shutter serial=210684 05:17:37 Shutter LASER close 05:17:38 Received message from Master: op=PointingHead serial=210688 05:17:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:17:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:17:38 Point started: ret=0 05:17:38 point_skyscan result=0 05:17:39 Check angles 05:17:39 SkyScan query 05:17:40 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.935<-21529 Statuses=0009 0009 05:17:40 Msec=0 True Az=136.365 Ze=-142.935 Az status=0009 Ze status=0009 05:17:40 Check angles 05:17:40 SkyScan query 05:17:41 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.935<-20129 Statuses=0009 0009 05:17:41 Msec=750 True Az=153.72 Ze=-121.935 Az status=0009 Ze status=0009 05:17:41 Check angles 05:17:41 SkyScan query 05:17:41 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.995<-18733 Statuses=0009 0009 05:17:41 Msec=1500 True Az=171.225 Ze=-100.995 Az status=0009 Ze status=0009 05:17:42 Check angles 05:17:42 SkyScan query 05:17:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.41<-17294 Statuses=0008 0009 05:17:42 Msec=2250 True Az=176.01 Ze=-79.41 Az status=0008 Ze status=0009 05:17:42 Check angles 05:17:42 SkyScan query 05:17:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.17<-15878 Statuses=0008 0009 05:17:43 Msec=3000 True Az=176.01 Ze=-58.17 Az status=0008 Ze status=0009 05:17:43 Check angles 05:17:43 SkyScan query 05:17:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:17:44 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:17:44 Message to Master queued w/err=0: serial=210688 error=0 05:17:49 Received message from Master: op=Filter serial=210689 05:17:49 Color wheel filter change from 0 to 0 05:17:49 FLIGetFilterPos err=0 currentPosition=0 05:17:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:49 Filter is already there-color wheel unchanged 05:17:49 Received message from Master: op=Shutter serial=210690 05:17:49 Shutter LASER close 05:17:49 Received message from Camera: op=State serial=210692 05:17:49 GetSingleValue result=40 Value=cccccccc 05:17:49 SkyScan query 05:17:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:17:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:50 Parameters OK 05:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:50 Set A/D data flow result=40 05:17:50 Set A/D channel type result=40 05:17:50 Set A/D encoding result=40 05:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:50 Set channel filter=0.000000e+000 result=40 05:17:50 Config A/D Result=40 05:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:50 Get A/D filter: -9.255963e+061 result=40 05:17:50 Get A/D value=-858993460 result=40 05:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:50 Parameters OK 05:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:50 Set A/D data flow result=40 05:17:50 Set A/D channel type result=40 05:17:50 Set A/D encoding result=40 05:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:50 Set channel filter=0.000000e+000 result=40 05:17:50 Config A/D Result=40 05:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:50 Get A/D filter: -9.255963e+061 result=40 05:17:50 Get A/D value=-858993460 result=40 05:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:50 Aux= 05:17:50 Message to Camera, serial 210692 queued 05:18:26 Received message from Master: op=PointingHead serial=210705 05:18:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:18:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:18:27 Point started: ret=0 05:18:27 point_skyscan result=0 05:18:27 Check angles 05:18:27 SkyScan query 05:18:28 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.975<-13465 Statuses=0009 0009 05:18:28 Msec=0 True Az=153.18 Ze=-21.975 Az status=0009 Ze status=0009 05:18:28 Check angles 05:18:28 SkyScan query 05:18:29 SkyScan query done: ret=0 az=135.78<-9052 ze=-0.975<-12065 Statuses=0009 0009 05:18:29 Msec=750 True Az=135.78 Ze=-0.975 Az status=0009 Ze status=0009 05:18:29 Check angles 05:18:29 SkyScan query 05:18:30 SkyScan query done: ret=0 az=118.215<-7881 ze=19.95<-10670 Statuses=0009 0009 05:18:30 Msec=1500 True Az=118.215 Ze=19.95 Az status=0009 Ze status=0009 05:18:30 Check angles 05:18:30 SkyScan query 05:18:30 SkyScan query done: ret=0 az=100.86<-6724 ze=40.95<-9270 Statuses=0009 0009 05:18:30 Msec=2250 True Az=100.86 Ze=40.95 Az status=0009 Ze status=0009 05:18:30 Check angles 05:18:30 SkyScan query 05:18:31 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 05:18:31 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 05:18:31 Check angles 05:18:31 SkyScan query 05:18:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:18:32 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:18:32 Message to Master queued w/err=0: serial=210705 error=0 05:18:37 Received message from Master: op=Filter serial=210706 05:18:37 Color wheel filter change from 0 to 0 05:18:37 FLIGetFilterPos err=0 currentPosition=0 05:18:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:37 Filter is already there-color wheel unchanged 05:18:37 Received message from Master: op=Shutter serial=210707 05:18:37 Shutter LASER close 05:18:37 Received message from Camera: op=State serial=210709 05:18:37 GetSingleValue result=40 Value=cccccccc 05:18:37 SkyScan query 05:18:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:18:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:38 Parameters OK 05:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:38 Set A/D data flow result=40 05:18:38 Set A/D channel type result=40 05:18:38 Set A/D encoding result=40 05:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:38 Set channel filter=0.000000e+000 result=40 05:18:38 Config A/D Result=40 05:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:38 Get A/D filter: -9.255963e+061 result=40 05:18:38 Get A/D value=-858993460 result=40 05:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:38 Parameters OK 05:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:38 Set A/D data flow result=40 05:18:38 Set A/D channel type result=40 05:18:38 Set A/D encoding result=40 05:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:38 Set channel filter=0.000000e+000 result=40 05:18:38 Config A/D Result=40 05:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:38 Get A/D filter: -9.255963e+061 result=40 05:18:38 Get A/D value=-858993460 result=40 05:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:38 Aux= 05:18:38 Message to Camera, serial 210709 queued 05:19:14 Received message from Master: op=PointingHead serial=210722 05:19:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:19:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:19:15 Point started: ret=0 05:19:15 point_skyscan result=0 05:19:16 Check angles 05:19:16 SkyScan query 05:19:16 SkyScan query done: ret=0 az=85.995<-5733 ze=21.975<-10535 Statuses=0008 0009 05:19:16 Msec=0 True Az=85.995 Ze=21.975 Az status=0008 Ze status=0009 05:19:16 Check angles 05:19:16 SkyScan query 05:19:17 SkyScan query done: ret=0 az=85.995<-5733 ze=0.555<-11963 Statuses=0008 0009 05:19:17 Msec=750 True Az=85.995 Ze=0.555 Az status=0008 Ze status=0009 05:19:17 Check angles 05:19:17 SkyScan query 05:19:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.415<-13361 Statuses=0008 0009 05:19:18 Msec=1500 True Az=85.995 Ze=-20.415 Az status=0008 Ze status=0009 05:19:18 Check angles 05:19:18 SkyScan query 05:19:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.34<-14756 Statuses=0008 0009 05:19:18 Msec=2250 True Az=85.995 Ze=-41.34 Az status=0008 Ze status=0009 05:19:19 Check angles 05:19:19 SkyScan query 05:19:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:19:19 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:19:19 Message to Master queued w/err=0: serial=210722 error=0 05:19:24 Received message from Master: op=Filter serial=210723 05:19:24 Color wheel filter change from 0 to 0 05:19:24 FLIGetFilterPos err=0 currentPosition=0 05:19:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:24 Filter is already there-color wheel unchanged 05:19:24 Received message from Master: op=Shutter serial=210724 05:19:24 Shutter LASER close 05:19:24 Received message from Camera: op=State serial=210726 05:19:24 GetSingleValue result=40 Value=cccccccc 05:19:24 SkyScan query 05:19:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:19:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:25 Parameters OK 05:19:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:25 Set A/D data flow result=40 05:19:25 Set A/D channel type result=40 05:19:25 Set A/D encoding result=40 05:19:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:25 Set channel filter=0.000000e+000 result=40 05:19:25 Config A/D Result=40 05:19:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:25 Get A/D filter: -9.255963e+061 result=40 05:19:25 Get A/D value=-858993460 result=40 05:19:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:25 Parameters OK 05:19:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:25 Set A/D data flow result=40 05:19:25 Set A/D channel type result=40 05:19:25 Set A/D encoding result=40 05:19:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:25 Set channel filter=0.000000e+000 result=40 05:19:25 Config A/D Result=40 05:19:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:25 Get A/D filter: -9.255963e+061 result=40 05:19:25 Get A/D value=-858993460 result=40 05:19:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:25 Aux= 05:19:25 Message to Camera, serial 210726 queued 05:20:02 Received message from Master: op=PointingHead serial=210739 05:20:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:20:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:20:02 Point started: ret=0 05:20:02 point_skyscan result=0 05:20:03 Check angles 05:20:03 SkyScan query 05:20:03 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.645<-17443 Statuses=0009 0009 05:20:03 Msec=0 True Az=109.335 Ze=-81.645 Az status=0009 Ze status=0009 05:20:04 Check angles 05:20:04 SkyScan query 05:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.585<-18839 Statuses=0008 0009 05:20:04 Msec=750 True Az=112.995 Ze=-102.585 Az status=0008 Ze status=0009 05:20:04 Check angles 05:20:04 SkyScan query 05:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.57<-20238 Statuses=0008 0009 05:20:05 Msec=1500 True Az=112.995 Ze=-123.57 Az status=0008 Ze status=0009 05:20:05 Check angles 05:20:05 SkyScan query 05:20:06 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.48<-21632 Statuses=0008 0009 05:20:06 Msec=2250 True Az=112.98 Ze=-144.48 Az status=0008 Ze status=0009 05:20:06 Check angles 05:20:06 SkyScan query 05:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.42<-23028 Statuses=0008 0009 05:20:06 Msec=3000 True Az=112.995 Ze=-165.42 Az status=0008 Ze status=0009 05:20:07 Check angles 05:20:07 SkyScan query 05:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:20:07 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:20:07 Message to Master queued w/err=0: serial=210739 error=0 05:20:12 Received message from Master: op=Filter serial=210740 05:20:12 Color wheel filter change from 0 to 0 05:20:12 FLIGetFilterPos err=0 currentPosition=0 05:20:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:12 Filter is already there-color wheel unchanged 05:20:12 Received message from Master: op=Shutter serial=210741 05:20:12 Shutter LASER open 05:20:13 Received message from Camera: op=State serial=210743 05:20:13 GetSingleValue result=40 Value=cccccccc 05:20:13 SkyScan query 05:20:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:20:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:13 Parameters OK 05:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:13 Set A/D data flow result=40 05:20:13 Set A/D channel type result=40 05:20:13 Set A/D encoding result=40 05:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:13 Set channel filter=0.000000e+000 result=40 05:20:13 Config A/D Result=40 05:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:13 Get A/D filter: -9.255963e+061 result=40 05:20:13 Get A/D value=-858993460 result=40 05:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:13 Parameters OK 05:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:13 Set A/D data flow result=40 05:20:13 Set A/D channel type result=40 05:20:13 Set A/D encoding result=40 05:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:13 Set channel filter=0.000000e+000 result=40 05:20:13 Config A/D Result=40 05:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:13 Get A/D filter: -9.255963e+061 result=40 05:20:13 Get A/D value=-858993460 result=40 05:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:13 Aux= 05:20:13 Message to Camera, serial 210743 queued 05:20:22 Received message from Master: op=Shutter serial=210753 05:20:22 Shutter LASER close 05:20:22 Received message from Master: op=PointingHead serial=210757 05:20:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:20:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:20:22 Point started: ret=0 05:20:22 point_skyscan result=0 05:20:23 Check angles 05:20:23 SkyScan query 05:20:24 SkyScan query done: ret=0 az=90.03<-6002 ze=157.35<-1510 Statuses=0009 0009 05:20:24 Msec=0 True Az=90.03 Ze=157.35 Az status=0009 Ze status=0009 05:20:24 Check angles 05:20:24 SkyScan query 05:20:24 SkyScan query done: ret=0 az=72.54<-4836 ze=136.395<-2907 Statuses=0009 0009 05:20:24 Msec=750 True Az=72.54 Ze=136.395 Az status=0009 Ze status=0009 05:20:25 Check angles 05:20:25 SkyScan query 05:20:25 SkyScan query done: ret=0 az=54.825<-3655 ze=115.035<-4331 Statuses=0009 0009 05:20:25 Msec=1500 True Az=54.825 Ze=115.035 Az status=0009 Ze status=0009 05:20:25 Check angles 05:20:25 SkyScan query 05:20:26 SkyScan query done: ret=0 az=41.01<-2734 ze=93.585<-5761 Statuses=0009 0009 05:20:26 Msec=2250 True Az=41.01 Ze=93.585 Az status=0009 Ze status=0009 05:20:26 Check angles 05:20:26 SkyScan query 05:20:27 SkyScan query done: ret=0 az=40.98<-2732 ze=72.63<-7158 Statuses=0008 0009 05:20:27 Msec=3000 True Az=40.98 Ze=72.63 Az status=0008 Ze status=0009 05:20:27 Check angles 05:20:27 SkyScan query 05:20:27 SkyScan query done: ret=0 az=40.98<-2732 ze=52.14<-8524 Statuses=0008 0009 05:20:27 Msec=3750 True Az=40.98 Ze=52.14 Az status=0008 Ze status=0009 05:20:28 Check angles 05:20:28 SkyScan query 05:20:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:20:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:20:28 Message to Master queued w/err=0: serial=210757 error=0 05:20:33 Received message from Master: op=Filter serial=210758 05:20:33 Color wheel filter change from 0 to 0 05:20:33 FLIGetFilterPos err=0 currentPosition=0 05:20:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:33 Filter is already there-color wheel unchanged 05:20:33 Received message from Master: op=Shutter serial=210759 05:20:33 Shutter LASER close 05:20:34 Received message from Camera: op=State serial=210761 05:20:34 GetSingleValue result=40 Value=cccccccc 05:20:34 SkyScan query 05:20:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:20:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:34 Parameters OK 05:20:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:34 Set A/D data flow result=40 05:20:34 Set A/D channel type result=40 05:20:34 Set A/D encoding result=40 05:20:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:34 Set channel filter=0.000000e+000 result=40 05:20:34 Config A/D Result=40 05:20:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:34 Get A/D filter: -9.255963e+061 result=40 05:20:34 Get A/D value=-858993460 result=40 05:20:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:34 Parameters OK 05:20:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:34 Set A/D data flow result=40 05:20:34 Set A/D channel type result=40 05:20:34 Set A/D encoding result=40 05:20:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:34 Set channel filter=0.000000e+000 result=40 05:20:34 Config A/D Result=40 05:20:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:34 Get A/D filter: -9.255963e+061 result=40 05:20:34 Get A/D value=-858993460 result=40 05:20:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:34 Aux= 05:20:34 Message to Camera, serial 210761 queued 05:21:11 Received message from Master: op=PointingHead serial=210774 05:21:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:21:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:21:11 Point started: ret=0 05:21:11 point_skyscan result=0 05:21:12 Check angles 05:21:12 SkyScan query 05:21:13 SkyScan query done: ret=0 az=40.995<-2733 ze=21.855<-10543 Statuses=0008 0009 05:21:13 Msec=0 True Az=40.995 Ze=21.855 Az status=0008 Ze status=0009 05:21:13 Check angles 05:21:13 SkyScan query 05:21:14 SkyScan query done: ret=0 az=41.01<-2734 ze=0.42<-11972 Statuses=0008 0009 05:21:14 Msec=750 True Az=41.01 Ze=0.42 Az status=0008 Ze status=0009 05:21:14 Check angles 05:21:14 SkyScan query 05:21:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.52<-13368 Statuses=0008 0009 05:21:14 Msec=1500 True Az=40.995 Ze=-20.52 Az status=0008 Ze status=0009 05:21:14 Check angles 05:21:14 SkyScan query 05:21:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 05:21:15 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 05:21:15 Check angles 05:21:15 SkyScan query 05:21:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:21:16 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:21:16 Message to Master queued w/err=0: serial=210774 error=0 05:21:21 Received message from Master: op=Filter serial=210775 05:21:21 Color wheel filter change from 0 to 0 05:21:21 FLIGetFilterPos err=0 currentPosition=0 05:21:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:21 Filter is already there-color wheel unchanged 05:21:21 Received message from Master: op=Shutter serial=210776 05:21:21 Shutter LASER close 05:21:21 Received message from Camera: op=State serial=210778 05:21:21 GetSingleValue result=40 Value=cccccccc 05:21:21 SkyScan query 05:21:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:21:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:22 Parameters OK 05:21:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:22 Set A/D data flow result=40 05:21:22 Set A/D channel type result=40 05:21:22 Set A/D encoding result=40 05:21:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:22 Set channel filter=0.000000e+000 result=40 05:21:22 Config A/D Result=40 05:21:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:22 Get A/D filter: -9.255963e+061 result=40 05:21:22 Get A/D value=-858993460 result=40 05:21:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:22 Parameters OK 05:21:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:22 Set A/D data flow result=40 05:21:22 Set A/D channel type result=40 05:21:22 Set A/D encoding result=40 05:21:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:22 Set channel filter=0.000000e+000 result=40 05:21:22 Config A/D Result=40 05:21:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:22 Get A/D filter: -9.255963e+061 result=40 05:21:22 Get A/D value=-858993460 result=40 05:21:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:22 Aux= 05:21:22 Message to Camera, serial 210778 queued 05:21:59 Received message from Master: op=PointingHead serial=210791 05:21:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:21:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:21:59 Point started: ret=0 05:21:59 point_skyscan result=0 05:22:00 Check angles 05:22:00 SkyScan query 05:22:00 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.79<-16586 Statuses=0009 0009 05:22:00 Msec=0 True Az=64.425 Ze=-68.79 Az status=0009 Ze status=0009 05:22:00 Check angles 05:22:00 SkyScan query 05:22:01 SkyScan query done: ret=0 az=81.975<-5465 ze=-89.745<-17983 Statuses=0009 0009 05:22:01 Msec=750 True Az=81.975 Ze=-89.745 Az status=0009 Ze status=0009 05:22:01 Check angles 05:22:01 SkyScan query 05:22:02 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.73<-19382 Statuses=0009 0009 05:22:02 Msec=1500 True Az=99.45 Ze=-110.73 Az status=0009 Ze status=0009 05:22:02 Check angles 05:22:02 SkyScan query 05:22:02 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.625<-20775 Statuses=0009 0009 05:22:02 Msec=2250 True Az=116.85 Ze=-131.625 Az status=0009 Ze status=0009 05:22:03 Check angles 05:22:03 SkyScan query 05:22:03 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 05:22:03 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 05:22:03 Check angles 05:22:03 SkyScan query 05:22:04 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:22:04 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:22:04 Message to Master queued w/err=0: serial=210791 error=0 05:22:09 Received message from Master: op=Filter serial=210792 05:22:09 Color wheel filter change from 0 to 0 05:22:09 FLIGetFilterPos err=0 currentPosition=0 05:22:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:09 Filter is already there-color wheel unchanged 05:22:09 Received message from Master: op=Shutter serial=210793 05:22:09 Shutter LASER close 05:22:09 Received message from Camera: op=State serial=210795 05:22:09 GetSingleValue result=40 Value=cccccccc 05:22:09 SkyScan query 05:22:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:22:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:10 Parameters OK 05:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:10 Set A/D data flow result=40 05:22:10 Set A/D channel type result=40 05:22:10 Set A/D encoding result=40 05:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:10 Set channel filter=0.000000e+000 result=40 05:22:10 Config A/D Result=40 05:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:10 Get A/D filter: -9.255963e+061 result=40 05:22:10 Get A/D value=-858993460 result=40 05:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:10 Parameters OK 05:22:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:10 Set A/D data flow result=40 05:22:10 Set A/D channel type result=40 05:22:10 Set A/D encoding result=40 05:22:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:10 Set channel filter=0.000000e+000 result=40 05:22:10 Config A/D Result=40 05:22:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:10 Get A/D filter: -9.255963e+061 result=40 05:22:10 Get A/D value=-858993460 result=40 05:22:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:10 Aux= 05:22:10 Message to Camera, serial 210795 queued 05:22:47 Received message from Master: op=PointingHead serial=210808 05:22:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:22:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:22:47 Point started: ret=0 05:22:47 point_skyscan result=0 05:22:48 Check angles 05:22:48 SkyScan query 05:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0009 0009 05:22:48 Msec=0 True Az=112.995 Ze=-171.495 Az status=0009 Ze status=0009 05:22:48 Check angles 05:22:48 SkyScan query 05:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:22:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:22:49 Message to Master queued w/err=0: serial=210808 error=0 05:22:54 Received message from Master: op=Filter serial=210809 05:22:54 Color wheel filter change from 0 to 0 05:22:54 FLIGetFilterPos err=0 currentPosition=0 05:22:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:54 Filter is already there-color wheel unchanged 05:22:54 Received message from Master: op=Shutter serial=210810 05:22:54 Shutter LASER open 05:22:54 Received message from Camera: op=State serial=210812 05:22:54 GetSingleValue result=40 Value=cccccccc 05:22:54 SkyScan query 05:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:22:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:55 Parameters OK 05:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:55 Set A/D data flow result=40 05:22:55 Set A/D channel type result=40 05:22:55 Set A/D encoding result=40 05:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:55 Set channel filter=0.000000e+000 result=40 05:22:55 Config A/D Result=40 05:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:55 Get A/D filter: -9.255963e+061 result=40 05:22:55 Get A/D value=-858993460 result=40 05:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:55 Parameters OK 05:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:55 Set A/D data flow result=40 05:22:55 Set A/D channel type result=40 05:22:55 Set A/D encoding result=40 05:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:55 Set channel filter=0.000000e+000 result=40 05:22:55 Config A/D Result=40 05:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:55 Get A/D filter: -9.255963e+061 result=40 05:22:55 Get A/D value=-858993460 result=40 05:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:55 Aux= 05:22:55 Message to Camera, serial 210812 queued 05:23:03 Received message from Master: op=Shutter serial=210822 05:23:03 Shutter LASER close 05:23:04 Received message from Master: op=PointingHead serial=210826 05:23:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:23:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:23:04 Point started: ret=0 05:23:04 point_skyscan result=0 05:23:05 Check angles 05:23:05 SkyScan query 05:23:06 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.115<-21541 Statuses=0009 0009 05:23:06 Msec=0 True Az=136.14 Ze=-143.115 Az status=0009 Ze status=0009 05:23:06 Check angles 05:23:06 SkyScan query 05:23:06 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.1<-20140 Statuses=0009 0009 05:23:06 Msec=750 True Az=153.525 Ze=-122.1 Az status=0009 Ze status=0009 05:23:07 Check angles 05:23:07 SkyScan query 05:23:07 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.19<-18746 Statuses=0009 0009 05:23:07 Msec=1500 True Az=171.06 Ze=-101.19 Az status=0009 Ze status=0009 05:23:07 Check angles 05:23:07 SkyScan query 05:23:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 05:23:08 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 05:23:08 Check angles 05:23:08 SkyScan query 05:23:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.815<-15921 Statuses=0008 0009 05:23:09 Msec=3000 True Az=175.995 Ze=-58.815 Az status=0008 Ze status=0009 05:23:09 Check angles 05:23:09 SkyScan query 05:23:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:23:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:23:09 Message to Master queued w/err=0: serial=210826 error=0 05:23:14 Received message from Master: op=Filter serial=210827 05:23:14 Color wheel filter change from 0 to 0 05:23:14 FLIGetFilterPos err=0 currentPosition=0 05:23:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:14 Filter is already there-color wheel unchanged 05:23:15 Received message from Master: op=Shutter serial=210828 05:23:15 Shutter LASER close 05:23:15 Received message from Camera: op=State serial=210830 05:23:15 GetSingleValue result=40 Value=cccccccc 05:23:15 SkyScan query 05:23:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:23:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:15 Parameters OK 05:23:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:15 Set A/D data flow result=40 05:23:15 Set A/D channel type result=40 05:23:15 Set A/D encoding result=40 05:23:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:15 Set channel filter=0.000000e+000 result=40 05:23:15 Config A/D Result=40 05:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:15 Get A/D filter: -9.255963e+061 result=40 05:23:15 Get A/D value=-858993460 result=40 05:23:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:15 Parameters OK 05:23:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:15 Set A/D data flow result=40 05:23:15 Set A/D channel type result=40 05:23:15 Set A/D encoding result=40 05:23:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:15 Set channel filter=0.000000e+000 result=40 05:23:15 Config A/D Result=40 05:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:15 Get A/D filter: -9.255963e+061 result=40 05:23:15 Get A/D value=-858993460 result=40 05:23:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:15 Aux= 05:23:15 Message to Camera, serial 210830 queued 05:23:52 Received message from Master: op=PointingHead serial=210843 05:23:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:23:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:23:53 Point started: ret=0 05:23:53 point_skyscan result=0 05:23:53 Check angles 05:23:53 SkyScan query 05:23:54 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.02<-13468 Statuses=0009 0009 05:23:54 Msec=0 True Az=153.195 Ze=-22.02 Az status=0009 Ze status=0009 05:23:54 Check angles 05:23:54 SkyScan query 05:23:55 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.005<-12067 Statuses=0009 0009 05:23:55 Msec=750 True Az=135.78 Ze=-1.005 Az status=0009 Ze status=0009 05:23:55 Check angles 05:23:55 SkyScan query 05:23:55 SkyScan query done: ret=0 az=118.11<-7874 ze=19.905<-10673 Statuses=0009 0009 05:23:55 Msec=1500 True Az=118.11 Ze=19.905 Az status=0009 Ze status=0009 05:23:56 Check angles 05:23:56 SkyScan query 05:23:56 SkyScan query done: ret=0 az=100.785<-6719 ze=40.965<-9269 Statuses=0009 0009 05:23:56 Msec=2250 True Az=100.785 Ze=40.965 Az status=0009 Ze status=0009 05:23:56 Check angles 05:23:56 SkyScan query 05:23:57 SkyScan query done: ret=0 az=85.98<-5732 ze=51.57<-8562 Statuses=0009 0008 05:23:57 Msec=3000 True Az=85.98 Ze=51.57 Az status=0009 Ze status=0008 05:23:57 Check angles 05:23:57 SkyScan query 05:23:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:23:58 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:23:58 Message to Master queued w/err=0: serial=210843 error=0 05:24:03 Received message from Master: op=Filter serial=210844 05:24:03 Color wheel filter change from 0 to 0 05:24:03 FLIGetFilterPos err=0 currentPosition=0 05:24:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:03 Filter is already there-color wheel unchanged 05:24:03 Received message from Master: op=Shutter serial=210845 05:24:03 Shutter LASER close 05:24:03 Received message from Camera: op=State serial=210847 05:24:03 GetSingleValue result=40 Value=cccccccc 05:24:03 SkyScan query 05:24:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:24:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:03 Parameters OK 05:24:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:03 Set A/D data flow result=40 05:24:03 Set A/D channel type result=40 05:24:03 Set A/D encoding result=40 05:24:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:03 Set channel filter=0.000000e+000 result=40 05:24:03 Config A/D Result=40 05:24:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:03 Get A/D filter: -9.255963e+061 result=40 05:24:03 Get A/D value=-858993460 result=40 05:24:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:03 Parameters OK 05:24:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:03 Set A/D data flow result=40 05:24:03 Set A/D channel type result=40 05:24:03 Set A/D encoding result=40 05:24:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:03 Set channel filter=0.000000e+000 result=40 05:24:03 Config A/D Result=40 05:24:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:03 Get A/D filter: -9.255963e+061 result=40 05:24:03 Get A/D value=-858993460 result=40 05:24:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:03 Aux= 05:24:03 Message to Camera, serial 210847 queued 05:24:39 Received message from Master: op=PointingHead serial=210859 05:24:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:24:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:24:40 Point started: ret=0 05:24:40 point_skyscan result=0 05:24:41 Check angles 05:24:41 SkyScan query 05:24:41 SkyScan query done: ret=0 az=85.995<-5733 ze=21.84<-10544 Statuses=0008 0009 05:24:41 Msec=0 True Az=85.995 Ze=21.84 Az status=0008 Ze status=0009 05:24:41 Check angles 05:24:41 SkyScan query 05:24:42 SkyScan query done: ret=0 az=85.995<-5733 ze=0.9<-11940 Statuses=0008 0009 05:24:42 Msec=750 True Az=85.995 Ze=0.9 Az status=0008 Ze status=0009 05:24:42 Check angles 05:24:42 SkyScan query 05:24:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.49<-13366 Statuses=0008 0009 05:24:43 Msec=1500 True Az=85.995 Ze=-20.49 Az status=0008 Ze status=0009 05:24:43 Check angles 05:24:43 SkyScan query 05:24:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.4<-14760 Statuses=0008 0009 05:24:43 Msec=2250 True Az=85.995 Ze=-41.4 Az status=0008 Ze status=0009 05:24:44 Check angles 05:24:44 SkyScan query 05:24:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:24:44 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:24:44 Message to Master queued w/err=0: serial=210859 error=0 05:24:49 Received message from Master: op=Filter serial=210860 05:24:49 Color wheel filter change from 0 to 0 05:24:49 FLIGetFilterPos err=0 currentPosition=0 05:24:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:49 Filter is already there-color wheel unchanged 05:24:49 Received message from Master: op=Shutter serial=210861 05:24:49 Shutter LASER close 05:24:49 Received message from Camera: op=State serial=210863 05:24:49 GetSingleValue result=40 Value=cccccccc 05:24:49 SkyScan query 05:24:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:24:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:50 Parameters OK 05:24:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:50 Set A/D data flow result=40 05:24:50 Set A/D channel type result=40 05:24:50 Set A/D encoding result=40 05:24:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:50 Set channel filter=0.000000e+000 result=40 05:24:50 Config A/D Result=40 05:24:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:50 Get A/D filter: -9.255963e+061 result=40 05:24:50 Get A/D value=-858993460 result=40 05:24:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:50 Parameters OK 05:24:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:50 Set A/D data flow result=40 05:24:50 Set A/D channel type result=40 05:24:50 Set A/D encoding result=40 05:24:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:50 Set channel filter=0.000000e+000 result=40 05:24:50 Config A/D Result=40 05:24:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:50 Get A/D filter: -9.255963e+061 result=40 05:24:50 Get A/D value=-858993460 result=40 05:24:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:50 Aux= 05:24:50 Message to Camera, serial 210863 queued 05:25:27 Received message from Master: op=PointingHead serial=210876 05:25:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:25:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:25:27 Point started: ret=0 05:25:27 point_skyscan result=0 05:25:28 Check angles 05:25:28 SkyScan query 05:25:28 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.36<-17424 Statuses=0009 0009 05:25:28 Msec=0 True Az=109.185 Ze=-81.36 Az status=0009 Ze status=0009 05:25:29 Check angles 05:25:29 SkyScan query 05:25:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 05:25:29 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 05:25:29 Check angles 05:25:29 SkyScan query 05:25:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 05:25:30 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 05:25:30 Check angles 05:25:30 SkyScan query 05:25:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 05:25:31 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 05:25:31 Check angles 05:25:31 SkyScan query 05:25:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 05:25:31 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 05:25:32 Check angles 05:25:32 SkyScan query 05:25:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:25:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:25:32 Message to Master queued w/err=0: serial=210876 error=0 05:25:37 Received message from Master: op=Filter serial=210877 05:25:37 Color wheel filter change from 0 to 0 05:25:37 FLIGetFilterPos err=0 currentPosition=0 05:25:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:37 Filter is already there-color wheel unchanged 05:25:37 Received message from Master: op=Shutter serial=210878 05:25:37 Shutter LASER open 05:25:38 Received message from Camera: op=State serial=210880 05:25:38 GetSingleValue result=40 Value=cccccccc 05:25:38 SkyScan query 05:25:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:25:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:38 Parameters OK 05:25:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:38 Set A/D data flow result=40 05:25:38 Set A/D channel type result=40 05:25:38 Set A/D encoding result=40 05:25:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:38 Set channel filter=0.000000e+000 result=40 05:25:38 Config A/D Result=40 05:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:38 Get A/D filter: -9.255963e+061 result=40 05:25:38 Get A/D value=-858993460 result=40 05:25:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:38 Parameters OK 05:25:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:38 Set A/D data flow result=40 05:25:38 Set A/D channel type result=40 05:25:38 Set A/D encoding result=40 05:25:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:38 Set channel filter=0.000000e+000 result=40 05:25:38 Config A/D Result=40 05:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:38 Get A/D filter: -9.255963e+061 result=40 05:25:38 Get A/D value=-858993460 result=40 05:25:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 [UTC 2018-12-17 05:25:38] 05:25:38 Aux= 05:25:38 Message to Camera, serial 210880 queued 05:25:47 Received message from Master: op=Shutter serial=210890 05:25:47 Shutter LASER close 05:25:47 Received message from Master: op=PointingHead serial=210894 05:25:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:25:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:25:47 Point started: ret=0 05:25:47 point_skyscan result=0 05:25:48 Check angles 05:25:48 SkyScan query 05:25:49 SkyScan query done: ret=0 az=90.06<-6004 ze=157.44<-1504 Statuses=0009 0009 05:25:49 Msec=0 True Az=90.06 Ze=157.44 Az status=0009 Ze status=0009 05:25:49 Check angles 05:25:49 SkyScan query 05:25:49 SkyScan query done: ret=0 az=72.585<-4839 ze=136.455<-2903 Statuses=0009 0009 05:25:49 Msec=750 True Az=72.585 Ze=136.455 Az status=0009 Ze status=0009 05:25:50 Check angles 05:25:50 SkyScan query 05:25:50 SkyScan query done: ret=0 az=55.23<-3682 ze=115.56<-4296 Statuses=0009 0009 05:25:50 Msec=1500 True Az=55.23 Ze=115.56 Az status=0009 Ze status=0009 05:25:50 Check angles 05:25:50 SkyScan query 05:25:51 SkyScan query done: ret=0 az=41.01<-2734 ze=94.14<-5724 Statuses=0009 0009 05:25:51 Msec=2250 True Az=41.01 Ze=94.14 Az status=0009 Ze status=0009 05:25:51 Check angles 05:25:51 SkyScan query 05:25:52 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 05:25:52 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 05:25:52 Check angles 05:25:52 SkyScan query 05:25:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 05:25:52 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 05:25:53 Check angles 05:25:53 SkyScan query 05:25:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:25:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:25:53 Message to Master queued w/err=0: serial=210894 error=0 05:25:58 Received message from Master: op=Filter serial=210895 05:25:58 Color wheel filter change from 0 to 0 05:25:58 FLIGetFilterPos err=0 currentPosition=0 05:25:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:58 Filter is already there-color wheel unchanged 05:25:58 Received message from Master: op=Shutter serial=210896 05:25:58 Shutter LASER close 05:25:59 Received message from Camera: op=State serial=210898 05:25:59 GetSingleValue result=40 Value=cccccccc 05:25:59 SkyScan query 05:25:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:25:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:59 Parameters OK 05:25:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:59 Set A/D data flow result=40 05:25:59 Set A/D channel type result=40 05:25:59 Set A/D encoding result=40 05:25:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:59 Set channel filter=0.000000e+000 result=40 05:25:59 Config A/D Result=40 05:25:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:59 Get A/D filter: -9.255963e+061 result=40 05:25:59 Get A/D value=-858993460 result=40 05:25:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:59 Parameters OK 05:25:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:59 Set A/D data flow result=40 05:25:59 Set A/D channel type result=40 05:25:59 Set A/D encoding result=40 05:25:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:59 Set channel filter=0.000000e+000 result=40 05:25:59 Config A/D Result=40 05:25:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:59 Get A/D filter: -9.255963e+061 result=40 05:25:59 Get A/D value=-858993460 result=40 05:25:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:59 Aux= 05:25:59 Message to Camera, serial 210898 queued 05:26:35 Received message from Master: op=PointingHead serial=210910 05:26:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:26:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:26:36 Point started: ret=0 05:26:36 point_skyscan result=0 05:26:36 Check angles 05:26:36 SkyScan query 05:26:37 SkyScan query done: ret=0 az=40.995<-2733 ze=21.165<-10589 Statuses=0008 0009 05:26:37 Msec=0 True Az=40.995 Ze=21.165 Az status=0008 Ze status=0009 05:26:37 Check angles 05:26:37 SkyScan query 05:26:38 SkyScan query done: ret=0 az=40.995<-2733 ze=0.165<-11989 Statuses=0008 0009 05:26:38 Msec=750 True Az=40.995 Ze=0.165 Az status=0008 Ze status=0009 05:26:38 Check angles 05:26:38 SkyScan query 05:26:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.79<-13386 Statuses=0008 0009 05:26:38 Msec=1500 True Az=40.995 Ze=-20.79 Az status=0008 Ze status=0009 05:26:39 Check angles 05:26:39 SkyScan query 05:26:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 05:26:39 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 05:26:39 Check angles 05:26:39 SkyScan query 05:26:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 05:26:40 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 05:26:40 Message to Master queued w/err=0: serial=210910 error=0 05:26:45 Received message from Master: op=Filter serial=210911 05:26:45 Color wheel filter change from 0 to 0 05:26:45 FLIGetFilterPos err=0 currentPosition=0 05:26:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:45 Filter is already there-color wheel unchanged 05:26:45 Received message from Master: op=Shutter serial=210912 05:26:45 Shutter LASER close 05:26:45 Received message from Camera: op=State serial=210914 05:26:45 GetSingleValue result=40 Value=cccccccc 05:26:45 SkyScan query 05:26:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:26:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:46 Parameters OK 05:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:46 Set A/D data flow result=40 05:26:46 Set A/D channel type result=40 05:26:46 Set A/D encoding result=40 05:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:46 Set channel filter=0.000000e+000 result=40 05:26:46 Config A/D Result=40 05:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:46 Get A/D filter: -9.255963e+061 result=40 05:26:46 Get A/D value=-858993460 result=40 05:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:46 Parameters OK 05:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:46 Set A/D data flow result=40 05:26:46 Set A/D channel type result=40 05:26:46 Set A/D encoding result=40 05:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:46 Set channel filter=0.000000e+000 result=40 05:26:46 Config A/D Result=40 05:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:46 Get A/D filter: -9.255963e+061 result=40 05:26:46 Get A/D value=-858993460 result=40 05:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:46 Aux= 05:26:46 Message to Camera, serial 210914 queued 05:27:22 Received message from Master: op=PointingHead serial=210927 05:27:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:27:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:27:23 Point started: ret=0 05:27:23 point_skyscan result=0 05:27:24 Check angles 05:27:24 SkyScan query 05:27:24 SkyScan query done: ret=0 az=63.9<-4260 ze=-68.19<-16546 Statuses=0009 0009 05:27:24 Msec=0 True Az=63.9 Ze=-68.19 Az status=0009 Ze status=0009 05:27:24 Check angles 05:27:24 SkyScan query 05:27:25 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.19<-17946 Statuses=0009 0009 05:27:25 Msec=750 True Az=81.36 Ze=-89.19 Az status=0009 Ze status=0009 05:27:25 Check angles 05:27:25 SkyScan query 05:27:26 SkyScan query done: ret=0 az=98.88<-6592 ze=-110.1<-19340 Statuses=0009 0009 05:27:26 Msec=1500 True Az=98.88 Ze=-110.1 Az status=0009 Ze status=0009 05:27:26 Check angles 05:27:26 SkyScan query 05:27:26 SkyScan query done: ret=0 az=116.31<-7754 ze=-131.085<-20739 Statuses=0009 0009 05:27:26 Msec=2250 True Az=116.31 Ze=-131.085 Az status=0009 Ze status=0009 05:27:27 Check angles 05:27:27 SkyScan query 05:27:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 05:27:27 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 05:27:27 Check angles 05:27:27 SkyScan query 05:27:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 05:27:28 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 05:27:28 Message to Master queued w/err=0: serial=210927 error=0 05:27:33 Received message from Master: op=Filter serial=210928 05:27:33 Color wheel filter change from 0 to 0 05:27:33 FLIGetFilterPos err=0 currentPosition=0 05:27:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:33 Filter is already there-color wheel unchanged 05:27:33 Received message from Master: op=Shutter serial=210929 05:27:33 Shutter LASER close 05:27:33 Received message from Camera: op=State serial=210931 05:27:33 GetSingleValue result=40 Value=cccccccc 05:27:33 SkyScan query 05:27:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:27:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:34 Parameters OK 05:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:34 Set A/D data flow result=40 05:27:34 Set A/D channel type result=40 05:27:34 Set A/D encoding result=40 05:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:34 Set channel filter=0.000000e+000 result=40 05:27:34 Config A/D Result=40 05:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:34 Get A/D filter: -9.255963e+061 result=40 05:27:34 Get A/D value=-858993460 result=40 05:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:34 Parameters OK 05:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:34 Set A/D data flow result=40 05:27:34 Set A/D channel type result=40 05:27:34 Set A/D encoding result=40 05:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:34 Set channel filter=0.000000e+000 result=40 05:27:34 Config A/D Result=40 05:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:34 Get A/D filter: -9.255963e+061 result=40 05:27:34 Get A/D value=-858993460 result=40 05:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:34 Aux= 05:27:34 Message to Camera, serial 210931 queued 05:28:10 Received message from Master: op=PointingHead serial=210944 05:28:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:28:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:28:11 Point started: ret=0 05:28:11 point_skyscan result=0 05:28:12 Check angles 05:28:12 SkyScan query 05:28:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 05:28:12 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 05:28:12 Check angles 05:28:12 SkyScan query 05:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:28:13 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:28:13 Message to Master queued w/err=0: serial=210944 error=0 05:28:18 Received message from Master: op=Filter serial=210945 05:28:18 Color wheel filter change from 0 to 0 05:28:18 FLIGetFilterPos err=0 currentPosition=0 05:28:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:18 Filter is already there-color wheel unchanged 05:28:18 Received message from Master: op=Shutter serial=210946 05:28:18 Shutter LASER open 05:28:18 Received message from Camera: op=State serial=210948 05:28:18 GetSingleValue result=40 Value=cccccccc 05:28:18 SkyScan query 05:28:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:28:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:19 Parameters OK 05:28:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:19 Set A/D data flow result=40 05:28:19 Set A/D channel type result=40 05:28:19 Set A/D encoding result=40 05:28:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:19 Set channel filter=0.000000e+000 result=40 05:28:19 Config A/D Result=40 05:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:19 Get A/D filter: -9.255963e+061 result=40 05:28:19 Get A/D value=-858993460 result=40 05:28:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:19 Parameters OK 05:28:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:19 Set A/D data flow result=40 05:28:19 Set A/D channel type result=40 05:28:19 Set A/D encoding result=40 05:28:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:19 Set channel filter=0.000000e+000 result=40 05:28:19 Config A/D Result=40 05:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:19 Get A/D filter: -9.255963e+061 result=40 05:28:19 Get A/D value=-858993460 result=40 05:28:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:19 Aux= 05:28:19 Message to Camera, serial 210948 queued 05:28:27 Received message from Master: op=Shutter serial=210958 05:28:27 Shutter LASER close 05:28:28 Received message from Master: op=PointingHead serial=210962 05:28:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:28:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:28:28 Point started: ret=0 05:28:28 point_skyscan result=0 05:28:29 Check angles 05:28:29 SkyScan query 05:28:30 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.8<-21520 Statuses=0009 0009 05:28:30 Msec=0 True Az=136.35 Ze=-142.8 Az status=0009 Ze status=0009 05:28:30 Check angles 05:28:30 SkyScan query 05:28:30 SkyScan query done: ret=0 az=153.945<-10263 ze=-121.815<-20121 Statuses=0009 0009 05:28:30 Msec=750 True Az=153.945 Ze=-121.815 Az status=0009 Ze status=0009 05:28:30 Check angles 05:28:30 SkyScan query 05:28:31 SkyScan query done: ret=0 az=171.705<-11447 ze=-100.215<-18681 Statuses=0009 0009 05:28:31 Msec=1500 True Az=171.705 Ze=-100.215 Az status=0009 Ze status=0009 05:28:31 Check angles 05:28:31 SkyScan query 05:28:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.455<-17297 Statuses=0008 0009 05:28:32 Msec=2250 True Az=176.01 Ze=-79.455 Az status=0008 Ze status=0009 05:28:32 Check angles 05:28:32 SkyScan query 05:28:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.485<-15899 Statuses=0008 0009 05:28:33 Msec=3000 True Az=176.01 Ze=-58.485 Az status=0008 Ze status=0009 05:28:33 Check angles 05:28:33 SkyScan query 05:28:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:28:33 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:28:33 Message to Master queued w/err=0: serial=210962 error=0 05:28:38 Received message from Master: op=Filter serial=210963 05:28:38 Color wheel filter change from 0 to 0 05:28:38 FLIGetFilterPos err=0 currentPosition=0 05:28:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:38 Filter is already there-color wheel unchanged 05:28:38 Received message from Master: op=Shutter serial=210964 05:28:39 Shutter LASER close 05:28:39 Received message from Camera: op=State serial=210966 05:28:39 GetSingleValue result=40 Value=cccccccc 05:28:39 SkyScan query 05:28:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:28:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:39 Parameters OK 05:28:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:39 Set A/D data flow result=40 05:28:39 Set A/D channel type result=40 05:28:39 Set A/D encoding result=40 05:28:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:39 Set channel filter=0.000000e+000 result=40 05:28:39 Config A/D Result=40 05:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:39 Get A/D filter: -9.255963e+061 result=40 05:28:39 Get A/D value=-858993460 result=40 05:28:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:39 Parameters OK 05:28:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:39 Set A/D data flow result=40 05:28:39 Set A/D channel type result=40 05:28:39 Set A/D encoding result=40 05:28:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:39 Set channel filter=0.000000e+000 result=40 05:28:39 Config A/D Result=40 05:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:39 Get A/D filter: -9.255963e+061 result=40 05:28:39 Get A/D value=-858993460 result=40 05:28:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:39 Aux= 05:28:39 Message to Camera, serial 210966 queued 05:29:16 Received message from Master: op=PointingHead serial=210979 05:29:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:29:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:29:16 Point started: ret=0 05:29:16 point_skyscan result=0 05:29:17 Check angles 05:29:17 SkyScan query 05:29:18 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.75<-13450 Statuses=0009 0009 05:29:18 Msec=0 True Az=152.955 Ze=-21.75 Az status=0009 Ze status=0009 05:29:18 Check angles 05:29:18 SkyScan query 05:29:19 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.765<-12051 Statuses=0009 0009 05:29:19 Msec=750 True Az=135.435 Ze=-0.765 Az status=0009 Ze status=0009 05:29:19 Check angles 05:29:19 SkyScan query 05:29:19 SkyScan query done: ret=0 az=118.035<-7869 ze=20.16<-10656 Statuses=0009 0009 05:29:19 Msec=1500 True Az=118.035 Ze=20.16 Az status=0009 Ze status=0009 05:29:19 Check angles 05:29:19 SkyScan query 05:29:20 SkyScan query done: ret=0 az=100.695<-6713 ze=41.16<-9256 Statuses=0009 0009 05:29:20 Msec=2250 True Az=100.695 Ze=41.16 Az status=0009 Ze status=0009 05:29:20 Check angles 05:29:20 SkyScan query 05:29:21 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 05:29:21 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 05:29:21 Check angles 05:29:21 SkyScan query 05:29:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:29:22 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:29:22 Message to Master queued w/err=0: serial=210979 error=0 05:29:27 Received message from Master: op=Filter serial=210980 05:29:27 Color wheel filter change from 0 to 0 05:29:27 FLIGetFilterPos err=0 currentPosition=0 05:29:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:27 Filter is already there-color wheel unchanged 05:29:27 Received message from Master: op=Shutter serial=210981 05:29:27 Shutter LASER close 05:29:27 Received message from Camera: op=State serial=210983 05:29:27 GetSingleValue result=40 Value=cccccccc 05:29:27 SkyScan query 05:29:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:29:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:27 Parameters OK 05:29:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:27 Set A/D data flow result=40 05:29:27 Set A/D channel type result=40 05:29:27 Set A/D encoding result=40 05:29:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:27 Set channel filter=0.000000e+000 result=40 05:29:27 Config A/D Result=40 05:29:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:27 Get A/D filter: -9.255963e+061 result=40 05:29:27 Get A/D value=-858993460 result=40 05:29:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:27 Parameters OK 05:29:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:27 Set A/D data flow result=40 05:29:27 Set A/D channel type result=40 05:29:27 Set A/D encoding result=40 05:29:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:27 Set channel filter=0.000000e+000 result=40 05:29:27 Config A/D Result=40 05:29:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:27 Get A/D filter: -9.255963e+061 result=40 05:29:27 Get A/D value=-858993460 result=40 05:29:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:27 Aux= 05:29:27 Message to Camera, serial 210983 queued 05:30:04 Received message from Master: op=PointingHead serial=210996 05:30:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:30:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:30:05 Point started: ret=0 05:30:05 point_skyscan result=0 05:30:05 Check angles 05:30:05 SkyScan query 05:30:06 SkyScan query done: ret=0 az=85.995<-5733 ze=21.615<-10559 Statuses=0008 0009 05:30:06 Msec=0 True Az=85.995 Ze=21.615 Az status=0008 Ze status=0009 05:30:06 Check angles 05:30:06 SkyScan query 05:30:07 SkyScan query done: ret=0 az=85.995<-5733 ze=0.225<-11985 Statuses=0008 0009 05:30:07 Msec=750 True Az=85.995 Ze=0.225 Az status=0008 Ze status=0009 05:30:07 Check angles 05:30:07 SkyScan query 05:30:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.715<-13381 Statuses=0008 0009 05:30:07 Msec=1500 True Az=85.995 Ze=-20.715 Az status=0008 Ze status=0009 05:30:08 Check angles 05:30:08 SkyScan query 05:30:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.135<-14809 Statuses=0008 0009 05:30:08 Msec=2250 True Az=85.995 Ze=-42.135 Az status=0008 Ze status=0009 05:30:08 Check angles 05:30:08 SkyScan query 05:30:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:30:09 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:30:09 Message to Master queued w/err=0: serial=210996 error=0 05:30:14 Received message from Master: op=Filter serial=210997 05:30:14 Color wheel filter change from 0 to 0 05:30:14 FLIGetFilterPos err=0 currentPosition=0 05:30:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:14 Filter is already there-color wheel unchanged 05:30:14 Received message from Master: op=Shutter serial=210998 05:30:14 Shutter LASER close 05:30:14 Received message from Camera: op=State serial=211000 05:30:14 GetSingleValue result=40 Value=cccccccc 05:30:14 SkyScan query 05:30:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:30:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:15 Parameters OK 05:30:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:15 Set A/D data flow result=40 05:30:15 Set A/D channel type result=40 05:30:15 Set A/D encoding result=40 05:30:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:15 Set channel filter=0.000000e+000 result=40 05:30:15 Config A/D Result=40 05:30:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:15 Get A/D filter: -9.255963e+061 result=40 05:30:15 Get A/D value=-858993460 result=40 05:30:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:15 Parameters OK 05:30:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:15 Set A/D data flow result=40 05:30:15 Set A/D channel type result=40 05:30:15 Set A/D encoding result=40 05:30:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:15 Set channel filter=0.000000e+000 result=40 05:30:15 Config A/D Result=40 05:30:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:15 Get A/D filter: -9.255963e+061 result=40 05:30:15 Get A/D value=-858993460 result=40 05:30:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:15 Aux= 05:30:15 Message to Camera, serial 211000 queued 05:30:52 Received message from Master: op=PointingHead serial=211013 05:30:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:30:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:30:52 Point started: ret=0 05:30:52 point_skyscan result=0 05:30:53 Check angles 05:30:53 SkyScan query 05:30:53 SkyScan query done: ret=0 az=109.5<-7300 ze=-81.735<-17449 Statuses=0009 0009 05:30:53 Msec=0 True Az=109.5 Ze=-81.735 Az status=0009 Ze status=0009 05:30:54 Check angles 05:30:54 SkyScan query 05:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.095<-18873 Statuses=0008 0009 05:30:54 Msec=750 True Az=112.995 Ze=-103.095 Az status=0008 Ze status=0009 05:30:54 Check angles 05:30:54 SkyScan query 05:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 05:30:55 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 05:30:55 Check angles 05:30:55 SkyScan query 05:30:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 05:30:56 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 05:30:56 Check angles 05:30:56 SkyScan query 05:30:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 05:30:56 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 05:30:57 Check angles 05:30:57 SkyScan query 05:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:30:57 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:30:57 Message to Master queued w/err=0: serial=211013 error=0 05:31:02 Received message from Master: op=Filter serial=211014 05:31:02 Color wheel filter change from 0 to 0 05:31:02 FLIGetFilterPos err=0 currentPosition=0 05:31:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:02 Filter is already there-color wheel unchanged 05:31:02 Received message from Master: op=Shutter serial=211015 05:31:02 Shutter LASER open 05:31:02 Received message from Camera: op=State serial=211017 05:31:02 GetSingleValue result=40 Value=cccccccc 05:31:02 SkyScan query 05:31:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:31:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:03 Parameters OK 05:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:03 Set A/D data flow result=40 05:31:03 Set A/D channel type result=40 05:31:03 Set A/D encoding result=40 05:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:03 Set channel filter=0.000000e+000 result=40 05:31:03 Config A/D Result=40 05:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:03 Get A/D filter: -9.255963e+061 result=40 05:31:03 Get A/D value=-858993460 result=40 05:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:03 Parameters OK 05:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:03 Set A/D data flow result=40 05:31:03 Set A/D channel type result=40 05:31:03 Set A/D encoding result=40 05:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:03 Set channel filter=0.000000e+000 result=40 05:31:03 Config A/D Result=40 05:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:03 Get A/D filter: -9.255963e+061 result=40 05:31:03 Get A/D value=-858993460 result=40 05:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:03 Aux= 05:31:03 Message to Camera, serial 211017 queued 05:31:11 Received message from Master: op=Shutter serial=211027 05:31:12 Shutter LASER close 05:31:12 Received message from Master: op=PointingHead serial=211031 05:31:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:31:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:31:12 Point started: ret=0 05:31:12 point_skyscan result=0 05:31:13 Check angles 05:31:13 SkyScan query 05:31:14 SkyScan query done: ret=0 az=89.85<-5990 ze=157.26<-1516 Statuses=0009 0009 05:31:14 Msec=0 True Az=89.85 Ze=157.26 Az status=0009 Ze status=0009 05:31:14 Check angles 05:31:14 SkyScan query 05:31:14 SkyScan query done: ret=0 az=72.03<-4802 ze=135.885<-2941 Statuses=0009 0009 05:31:14 Msec=750 True Az=72.03 Ze=135.885 Az status=0009 Ze status=0009 05:31:15 Check angles 05:31:15 SkyScan query 05:31:15 SkyScan query done: ret=0 az=54.795<-3653 ze=114.84<-4344 Statuses=0009 0009 05:31:15 Msec=1500 True Az=54.795 Ze=114.84 Az status=0009 Ze status=0009 05:31:15 Check angles 05:31:15 SkyScan query 05:31:16 SkyScan query done: ret=0 az=41.025<-2735 ze=93.96<-5736 Statuses=0009 0009 05:31:16 Msec=2250 True Az=41.025 Ze=93.96 Az status=0009 Ze status=0009 05:31:16 Check angles 05:31:16 SkyScan query 05:31:17 SkyScan query done: ret=0 az=40.98<-2732 ze=72.975<-7135 Statuses=0008 0009 05:31:17 Msec=3000 True Az=40.98 Ze=72.975 Az status=0008 Ze status=0009 05:31:17 Check angles 05:31:17 SkyScan query 05:31:17 SkyScan query done: ret=0 az=40.98<-2732 ze=52.59<-8494 Statuses=0008 0009 05:31:17 Msec=3750 True Az=40.98 Ze=52.59 Az status=0008 Ze status=0009 05:31:18 Check angles 05:31:18 SkyScan query 05:31:18 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 05:31:18 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 05:31:18 Message to Master queued w/err=0: serial=211031 error=0 05:31:23 Received message from Master: op=Filter serial=211032 05:31:23 Color wheel filter change from 0 to 0 05:31:23 FLIGetFilterPos err=0 currentPosition=0 05:31:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:23 Filter is already there-color wheel unchanged 05:31:23 Received message from Master: op=Shutter serial=211033 05:31:23 Shutter LASER close 05:31:23 Received message from Camera: op=State serial=211035 05:31:23 GetSingleValue result=40 Value=cccccccc 05:31:23 SkyScan query 05:31:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:31:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:24 Parameters OK 05:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:24 Set A/D data flow result=40 05:31:24 Set A/D channel type result=40 05:31:24 Set A/D encoding result=40 05:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:24 Set channel filter=0.000000e+000 result=40 05:31:24 Config A/D Result=40 05:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:24 Get A/D filter: -9.255963e+061 result=40 05:31:24 Get A/D value=-858993460 result=40 05:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:24 Parameters OK 05:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:24 Set A/D data flow result=40 05:31:24 Set A/D channel type result=40 05:31:24 Set A/D encoding result=40 05:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:24 Set channel filter=0.000000e+000 result=40 05:31:24 Config A/D Result=40 05:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:24 Get A/D filter: -9.255963e+061 result=40 05:31:24 Get A/D value=-858993460 result=40 05:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:24 Aux= 05:31:24 Message to Camera, serial 211035 queued 05:32:01 Received message from Master: op=PointingHead serial=211048 05:32:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:32:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:32:01 Point started: ret=0 05:32:01 point_skyscan result=0 05:32:02 Check angles 05:32:02 SkyScan query 05:32:03 SkyScan query done: ret=0 az=64.365<-4291 ze=81.81<-6546 Statuses=0009 0009 05:32:03 Msec=0 True Az=64.365 Ze=81.81 Az status=0009 Ze status=0009 05:32:03 Check angles 05:32:03 SkyScan query 05:32:04 SkyScan query done: ret=0 az=82.17<-5478 ze=103.185<-5121 Statuses=0009 0009 05:32:04 Msec=750 True Az=82.17 Ze=103.185 Az status=0009 Ze status=0009 05:32:04 Check angles 05:32:04 SkyScan query 05:32:04 SkyScan query done: ret=0 az=99.705<-6647 ze=124.125<-3725 Statuses=0009 0009 05:32:04 Msec=1500 True Az=99.705 Ze=124.125 Az status=0009 Ze status=0009 05:32:04 Check angles 05:32:04 SkyScan query 05:32:05 SkyScan query done: ret=0 az=117.255<-7817 ze=145.08<-2328 Statuses=0009 0009 05:32:05 Msec=2250 True Az=117.255 Ze=145.08 Az status=0009 Ze status=0009 05:32:05 Check angles 05:32:05 SkyScan query 05:32:06 SkyScan query done: ret=0 az=131.07<-8738 ze=166.035<-931 Statuses=0009 0009 05:32:06 Msec=3000 True Az=131.07 Ze=166.035 Az status=0009 Ze status=0009 05:32:06 Check angles 05:32:06 SkyScan query 05:32:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-172.59<-23506 Statuses=0008 0009 05:32:07 Msec=3750 True Az=131.01 Ze=-172.59 Az status=0008 Ze status=0009 05:32:07 Check angles 05:32:07 SkyScan query 05:32:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.65<-22110 Statuses=0008 0009 05:32:07 Msec=4500 True Az=130.995 Ze=-151.65 Az status=0008 Ze status=0009 05:32:08 Check angles 05:32:08 SkyScan query 05:32:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 05:32:08 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 05:32:08 Message to Master queued w/err=0: serial=211048 error=0 05:32:13 Received message from Master: op=Filter serial=211049 05:32:13 Color wheel filter change from 0 to 0 05:32:13 FLIGetFilterPos err=0 currentPosition=0 05:32:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:13 Filter is already there-color wheel unchanged 05:32:13 Received message from Master: op=Shutter serial=211050 05:32:13 Shutter LASER close 05:32:13 Received message from Camera: op=State serial=211052 05:32:13 GetSingleValue result=40 Value=cccccccc 05:32:13 SkyScan query 05:32:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:32:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:14 Parameters OK 05:32:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:14 Set A/D data flow result=40 05:32:14 Set A/D channel type result=40 05:32:14 Set A/D encoding result=40 05:32:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:14 Set channel filter=0.000000e+000 result=40 05:32:14 Config A/D Result=40 05:32:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:14 Get A/D filter: -9.255963e+061 result=40 05:32:14 Get A/D value=-858993460 result=40 05:32:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:14 Parameters OK 05:32:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:14 Set A/D data flow result=40 05:32:14 Set A/D channel type result=40 05:32:14 Set A/D encoding result=40 05:32:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:14 Set channel filter=0.000000e+000 result=40 05:32:14 Config A/D Result=40 05:32:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:14 Get A/D filter: -9.255963e+061 result=40 05:32:14 Get A/D value=-858993460 result=40 05:32:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:14 Aux= 05:32:14 Message to Camera, serial 211052 queued 05:32:51 Received message from Master: op=PointingHead serial=211065 05:32:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:32:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:32:51 Point started: ret=0 05:32:51 point_skyscan result=0 05:32:52 Check angles 05:32:52 SkyScan query 05:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0009 0009 05:32:52 Msec=0 True Az=112.995 Ze=-171.09 Az status=0009 Ze status=0009 05:32:53 Check angles 05:32:53 SkyScan query 05:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:32:53 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:32:53 Message to Master queued w/err=0: serial=211065 error=0 05:32:58 Received message from Master: op=Filter serial=211066 05:32:58 Color wheel filter change from 0 to 0 05:32:58 FLIGetFilterPos err=0 currentPosition=0 05:32:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:58 Filter is already there-color wheel unchanged 05:32:58 Received message from Master: op=Shutter serial=211067 05:32:58 Shutter LASER open 05:32:59 Received message from Camera: op=State serial=211069 05:32:59 GetSingleValue result=40 Value=cccccccc 05:32:59 SkyScan query 05:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:32:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:59 Parameters OK 05:32:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:59 Set A/D data flow result=40 05:32:59 Set A/D channel type result=40 05:32:59 Set A/D encoding result=40 05:32:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:59 Set channel filter=0.000000e+000 result=40 05:32:59 Config A/D Result=40 05:32:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:59 Get A/D filter: -9.255963e+061 result=40 05:32:59 Get A/D value=-858993460 result=40 05:32:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:59 Parameters OK 05:32:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:59 Set A/D data flow result=40 05:32:59 Set A/D channel type result=40 05:32:59 Set A/D encoding result=40 05:32:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:59 Set channel filter=0.000000e+000 result=40 05:32:59 Config A/D Result=40 05:32:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:59 Get A/D filter: -9.255963e+061 result=40 05:32:59 Get A/D value=-858993460 result=40 05:32:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:59 Aux= 05:32:59 Message to Camera, serial 211069 queued 05:33:08 Received message from Master: op=Shutter serial=211079 05:33:08 Shutter LASER close 05:33:08 Received message from Master: op=PointingHead serial=211083 05:33:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:33:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:33:08 Point started: ret=0 05:33:08 point_skyscan result=0 05:33:09 Check angles 05:33:09 SkyScan query 05:33:10 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.055<-21537 Statuses=0009 0009 05:33:10 Msec=0 True Az=136.155 Ze=-143.055 Az status=0009 Ze status=0009 05:33:10 Check angles 05:33:10 SkyScan query 05:33:11 SkyScan query done: ret=0 az=153.69<-10246 ze=-122.085<-20139 Statuses=0009 0009 05:33:11 Msec=750 True Az=153.69 Ze=-122.085 Az status=0009 Ze status=0009 05:33:11 Check angles 05:33:11 SkyScan query 05:33:11 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.19<-18746 Statuses=0009 0009 05:33:11 Msec=1500 True Az=171.195 Ze=-101.19 Az status=0009 Ze status=0009 05:33:11 Check angles 05:33:11 SkyScan query 05:33:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.235<-17349 Statuses=0008 0009 05:33:12 Msec=2250 True Az=176.01 Ze=-80.235 Az status=0008 Ze status=0009 05:33:12 Check angles 05:33:12 SkyScan query 05:33:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.25<-15950 Statuses=0008 0009 05:33:13 Msec=3000 True Az=175.995 Ze=-59.25 Az status=0008 Ze status=0009 05:33:13 Check angles 05:33:13 SkyScan query 05:33:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:33:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:33:14 Message to Master queued w/err=0: serial=211083 error=0 05:33:19 Received message from Master: op=Filter serial=211084 05:33:19 Color wheel filter change from 0 to 0 05:33:19 FLIGetFilterPos err=0 currentPosition=0 05:33:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:19 Filter is already there-color wheel unchanged 05:33:19 Received message from Master: op=Shutter serial=211085 05:33:19 Shutter LASER close 05:33:19 Received message from Camera: op=State serial=211087 05:33:19 GetSingleValue result=40 Value=cccccccc 05:33:19 SkyScan query 05:33:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:33:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:19 Parameters OK 05:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:19 Set A/D data flow result=40 05:33:19 Set A/D channel type result=40 05:33:19 Set A/D encoding result=40 05:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:19 Set channel filter=0.000000e+000 result=40 05:33:19 Config A/D Result=40 05:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:19 Get A/D filter: -9.255963e+061 result=40 05:33:19 Get A/D value=-858993460 result=40 05:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:19 Parameters OK 05:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:19 Set A/D data flow result=40 05:33:19 Set A/D channel type result=40 05:33:19 Set A/D encoding result=40 05:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:19 Set channel filter=0.000000e+000 result=40 05:33:19 Config A/D Result=40 05:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:19 Get A/D filter: -9.255963e+061 result=40 05:33:19 Get A/D value=-858993460 result=40 05:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:19 Aux= 05:33:19 Message to Camera, serial 211087 queued 05:33:56 Received message from Master: op=PointingHead serial=211100 05:33:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:33:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:33:57 Point started: ret=0 05:33:57 point_skyscan result=0 05:33:57 Check angles 05:33:57 SkyScan query 05:33:58 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.87<-13458 Statuses=0009 0009 05:33:58 Msec=0 True Az=153.075 Ze=-21.87 Az status=0009 Ze status=0009 05:33:58 Check angles 05:33:58 SkyScan query 05:33:59 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.855<-12057 Statuses=0009 0009 05:33:59 Msec=750 True Az=135.72 Ze=-0.855 Az status=0009 Ze status=0009 05:33:59 Check angles 05:33:59 SkyScan query 05:33:59 SkyScan query done: ret=0 az=118.14<-7876 ze=20.055<-10663 Statuses=0009 0009 05:33:59 Msec=1500 True Az=118.14 Ze=20.055 Az status=0009 Ze status=0009 05:34:00 Check angles 05:34:00 SkyScan query 05:34:00 SkyScan query done: ret=0 az=100.725<-6715 ze=41.055<-9263 Statuses=0009 0009 05:34:00 Msec=2250 True Az=100.725 Ze=41.055 Az status=0009 Ze status=0009 05:34:00 Check angles 05:34:00 SkyScan query 05:34:01 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 05:34:01 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 05:34:01 Check angles 05:34:01 SkyScan query 05:34:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:34:02 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:34:02 Message to Master queued w/err=0: serial=211100 error=0 05:34:07 Received message from Master: op=Filter serial=211101 05:34:07 Color wheel filter change from 0 to 0 05:34:07 FLIGetFilterPos err=0 currentPosition=0 05:34:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:07 Filter is already there-color wheel unchanged 05:34:07 Received message from Master: op=Shutter serial=211102 05:34:07 Shutter LASER close 05:34:07 Received message from Camera: op=State serial=211104 05:34:07 GetSingleValue result=40 Value=cccccccc 05:34:07 SkyScan query 05:34:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:34:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:08 Parameters OK 05:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:08 Set A/D data flow result=40 05:34:08 Set A/D channel type result=40 05:34:08 Set A/D encoding result=40 05:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:08 Set channel filter=0.000000e+000 result=40 05:34:08 Config A/D Result=40 05:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:08 Get A/D filter: -9.255963e+061 result=40 05:34:08 Get A/D value=-858993460 result=40 05:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:08 Parameters OK 05:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:08 Set A/D data flow result=40 05:34:08 Set A/D channel type result=40 05:34:08 Set A/D encoding result=40 05:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:08 Set channel filter=0.000000e+000 result=40 05:34:08 Config A/D Result=40 05:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:08 Get A/D filter: -9.255963e+061 result=40 05:34:08 Get A/D value=-858993460 result=40 05:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:08 Aux= 05:34:08 Message to Camera, serial 211104 queued 05:34:45 Received message from Master: op=PointingHead serial=211117 05:34:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:34:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:34:45 Point started: ret=0 05:34:45 point_skyscan result=0 05:34:46 Check angles 05:34:46 SkyScan query 05:34:46 SkyScan query done: ret=0 az=85.995<-5733 ze=21.9<-10540 Statuses=0008 0009 05:34:46 Msec=0 True Az=85.995 Ze=21.9 Az status=0008 Ze status=0009 05:34:46 Check angles 05:34:46 SkyScan query 05:34:47 SkyScan query done: ret=0 az=85.995<-5733 ze=0.525<-11965 Statuses=0008 0009 05:34:47 Msec=750 True Az=85.995 Ze=0.525 Az status=0008 Ze status=0009 05:34:47 Check angles 05:34:47 SkyScan query 05:34:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.445<-13363 Statuses=0008 0009 05:34:48 Msec=1500 True Az=85.995 Ze=-20.445 Az status=0008 Ze status=0009 05:34:48 Check angles 05:34:48 SkyScan query 05:34:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.37<-14758 Statuses=0008 0009 05:34:49 Msec=2250 True Az=85.995 Ze=-41.37 Az status=0008 Ze status=0009 05:34:49 Check angles 05:34:49 SkyScan query 05:34:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:34:49 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:34:49 Message to Master queued w/err=0: serial=211117 error=0 05:34:54 Received message from Master: op=Filter serial=211118 05:34:54 Color wheel filter change from 0 to 0 05:34:54 FLIGetFilterPos err=0 currentPosition=0 05:34:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:54 Filter is already there-color wheel unchanged 05:34:54 Received message from Master: op=Shutter serial=211119 05:34:54 Shutter LASER close 05:34:54 Received message from Camera: op=State serial=211121 05:34:54 GetSingleValue result=40 Value=cccccccc 05:34:54 SkyScan query 05:34:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:34:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:55 Parameters OK 05:34:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:55 Set A/D data flow result=40 05:34:55 Set A/D channel type result=40 05:34:55 Set A/D encoding result=40 05:34:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:55 Set channel filter=0.000000e+000 result=40 05:34:55 Config A/D Result=40 05:34:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:55 Get A/D filter: -9.255963e+061 result=40 05:34:55 Get A/D value=-858993460 result=40 05:34:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:55 Parameters OK 05:34:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:55 Set A/D data flow result=40 05:34:55 Set A/D channel type result=40 05:34:55 Set A/D encoding result=40 05:34:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:55 Set channel filter=0.000000e+000 result=40 05:34:55 Config A/D Result=40 05:34:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:55 Get A/D filter: -9.255963e+061 result=40 05:34:55 Get A/D value=-858993460 result=40 05:34:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:55 Aux= 05:34:55 Message to Camera, serial 211121 queued 05:35:32 Received message from Master: op=PointingHead serial=211134 05:35:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:35:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:35:32 Point started: ret=0 05:35:32 point_skyscan result=0 05:35:33 Check angles 05:35:33 SkyScan query 05:35:34 SkyScan query done: ret=0 az=109.455<-7297 ze=-81.75<-17450 Statuses=0009 0009 05:35:34 Msec=0 True Az=109.455 Ze=-81.75 Az status=0009 Ze status=0009 05:35:34 Check angles 05:35:34 SkyScan query 05:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 05:35:34 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 05:35:34 Check angles 05:35:34 SkyScan query 05:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 05:35:35 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 05:35:35 Check angles 05:35:35 SkyScan query 05:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 05:35:36 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 05:35:36 Check angles 05:35:36 SkyScan query [UTC 2018-12-17 05:35:37] 05:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 05:35:37 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 05:35:37 Check angles 05:35:37 SkyScan query 05:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:35:37 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:35:37 Message to Master queued w/err=0: serial=211134 error=0 05:35:42 Received message from Master: op=Filter serial=211135 05:35:42 Color wheel filter change from 0 to 0 05:35:42 FLIGetFilterPos err=0 currentPosition=0 05:35:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:42 Filter is already there-color wheel unchanged 05:35:43 Received message from Master: op=Shutter serial=211136 05:35:43 Shutter LASER open 05:35:43 Received message from Camera: op=State serial=211138 05:35:43 GetSingleValue result=40 Value=cccccccc 05:35:43 SkyScan query 05:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:35:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:43 Parameters OK 05:35:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:43 Set A/D data flow result=40 05:35:43 Set A/D channel type result=40 05:35:43 Set A/D encoding result=40 05:35:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:43 Set channel filter=0.000000e+000 result=40 05:35:43 Config A/D Result=40 05:35:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:43 Get A/D filter: -9.255963e+061 result=40 05:35:43 Get A/D value=-858993460 result=40 05:35:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:43 Parameters OK 05:35:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:43 Set A/D data flow result=40 05:35:43 Set A/D channel type result=40 05:35:43 Set A/D encoding result=40 05:35:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:43 Set channel filter=0.000000e+000 result=40 05:35:43 Config A/D Result=40 05:35:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:43 Get A/D filter: -9.255963e+061 result=40 05:35:43 Get A/D value=-858993460 result=40 05:35:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:43 Aux= 05:35:43 Message to Camera, serial 211138 queued 05:35:52 Received message from Master: op=Shutter serial=211148 05:35:52 Shutter LASER close 05:35:52 Received message from Master: op=PointingHead serial=211152 05:35:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:35:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:35:52 Point started: ret=0 05:35:52 point_skyscan result=0 [UTC 2018-12-17 05:35:52] 05:35:53 Check angles 05:35:53 SkyScan query 05:35:54 SkyScan query done: ret=0 az=89.58<-5972 ze=156.795<-1547 Statuses=0009 0009 05:35:54 Msec=0 True Az=89.58 Ze=156.795 Az status=0009 Ze status=0009 05:35:54 Check angles 05:35:54 SkyScan query 05:35:55 SkyScan query done: ret=0 az=72.06<-4804 ze=135.825<-2945 Statuses=0009 0009 05:35:55 Msec=750 True Az=72.06 Ze=135.825 Az status=0009 Ze status=0009 05:35:55 Check angles 05:35:55 SkyScan query 05:35:55 SkyScan query done: ret=0 az=54.705<-3647 ze=114.87<-4342 Statuses=0009 0009 05:35:55 Msec=1500 True Az=54.705 Ze=114.87 Az status=0009 Ze status=0009 05:35:55 Check angles 05:35:55 SkyScan query 05:35:56 SkyScan query done: ret=0 az=41.025<-2735 ze=93.915<-5739 Statuses=0009 0009 05:35:56 Msec=2250 True Az=41.025 Ze=93.915 Az status=0009 Ze status=0009 05:35:56 Check angles 05:35:56 SkyScan query 05:35:57 SkyScan query done: ret=0 az=40.98<-2732 ze=72.915<-7139 Statuses=0008 0009 05:35:57 Msec=3000 True Az=40.98 Ze=72.915 Az status=0008 Ze status=0009 05:35:57 Check angles 05:35:57 SkyScan query 05:35:58 SkyScan query done: ret=0 az=40.98<-2732 ze=52.56<-8496 Statuses=0008 0009 05:35:58 Msec=3750 True Az=40.98 Ze=52.56 Az status=0008 Ze status=0009 05:35:58 Check angles 05:35:58 SkyScan query 05:35:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:35:58 Msec=4500 True Az=40.995 Ze=51.495 Az status=0008 Ze status=0008 05:35:58 Message to Master queued w/err=0: serial=211152 error=0 05:36:03 Received message from Master: op=Filter serial=211153 05:36:03 Color wheel filter change from 0 to 0 05:36:03 FLIGetFilterPos err=0 currentPosition=0 05:36:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:03 Filter is already there-color wheel unchanged 05:36:03 Received message from Master: op=Shutter serial=211154 05:36:03 Shutter LASER close 05:36:04 Received message from Camera: op=State serial=211156 05:36:04 GetSingleValue result=40 Value=cccccccc 05:36:04 SkyScan query 05:36:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.51<-8566 Statuses=0008 0008 05:36:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:04 Parameters OK 05:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:04 Set A/D data flow result=40 05:36:04 Set A/D channel type result=40 05:36:04 Set A/D encoding result=40 05:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:04 Set channel filter=0.000000e+000 result=40 05:36:04 Config A/D Result=40 05:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:04 Get A/D filter: -9.255963e+061 result=40 05:36:04 Get A/D value=-858993460 result=40 05:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:04 Parameters OK 05:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:04 Set A/D data flow result=40 05:36:04 Set A/D channel type result=40 05:36:04 Set A/D encoding result=40 05:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:04 Set channel filter=0.000000e+000 result=40 05:36:04 Config A/D Result=40 05:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:04 Get A/D filter: -9.255963e+061 result=40 05:36:04 Get A/D value=-858993460 result=40 05:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.509998 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:04 Aux= 05:36:04 Message to Camera, serial 211156 queued 05:36:41 Received message from Master: op=PointingHead serial=211169 05:36:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:36:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:36:42 Point started: ret=0 05:36:42 point_skyscan result=0 05:36:42 Check angles 05:36:42 SkyScan query 05:36:43 SkyScan query done: ret=0 az=63.945<-4263 ze=81.315<-6579 Statuses=0009 0009 05:36:43 Msec=0 True Az=63.945 Ze=81.315 Az status=0009 Ze status=0009 05:36:43 Check angles 05:36:43 SkyScan query 05:36:44 SkyScan query done: ret=0 az=81.345<-5423 ze=102.24<-5184 Statuses=0009 0009 05:36:44 Msec=750 True Az=81.345 Ze=102.24 Az status=0009 Ze status=0009 05:36:44 Check angles 05:36:44 SkyScan query 05:36:44 SkyScan query done: ret=0 az=99.21<-6614 ze=123.63<-3758 Statuses=0009 0009 05:36:44 Msec=1500 True Az=99.21 Ze=123.63 Az status=0009 Ze status=0009 05:36:45 Check angles 05:36:45 SkyScan query 05:36:45 SkyScan query done: ret=0 az=116.79<-7786 ze=144.57<-2362 Statuses=0009 0009 05:36:45 Msec=2250 True Az=116.79 Ze=144.57 Az status=0009 Ze status=0009 05:36:45 Check angles 05:36:45 SkyScan query 05:36:46 SkyScan query done: ret=0 az=131.07<-8738 ze=165.96<-936 Statuses=0009 0009 05:36:46 Msec=3000 True Az=131.07 Ze=165.96 Az status=0009 Ze status=0009 05:36:46 Check angles 05:36:46 SkyScan query 05:36:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.04<-23536 Statuses=0008 0009 05:36:47 Msec=3750 True Az=131.01 Ze=-173.04 Az status=0008 Ze status=0009 05:36:47 Check angles 05:36:47 SkyScan query 05:36:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.1<-22140 Statuses=0008 0009 05:36:47 Msec=4500 True Az=130.995 Ze=-152.1 Az status=0008 Ze status=0009 05:36:48 Check angles 05:36:48 SkyScan query 05:36:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 05:36:48 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 05:36:48 Message to Master queued w/err=0: serial=211169 error=0 05:36:53 Received message from Master: op=Filter serial=211170 05:36:53 Color wheel filter change from 0 to 0 05:36:53 FLIGetFilterPos err=0 currentPosition=0 05:36:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:53 Filter is already there-color wheel unchanged 05:36:53 Received message from Master: op=Shutter serial=211171 05:36:53 Shutter LASER close 05:36:53 Received message from Camera: op=State serial=211173 05:36:53 GetSingleValue result=40 Value=cccccccc 05:36:53 SkyScan query 05:36:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:36:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:54 Parameters OK 05:36:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:54 Set A/D data flow result=40 05:36:54 Set A/D channel type result=40 05:36:54 Set A/D encoding result=40 05:36:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:54 Set channel filter=0.000000e+000 result=40 05:36:54 Config A/D Result=40 05:36:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:54 Get A/D filter: -9.255963e+061 result=40 05:36:54 Get A/D value=-858993460 result=40 05:36:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:54 Parameters OK 05:36:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:54 Set A/D data flow result=40 05:36:54 Set A/D channel type result=40 05:36:54 Set A/D encoding result=40 05:36:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:54 Set channel filter=0.000000e+000 result=40 05:36:54 Config A/D Result=40 05:36:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:54 Get A/D filter: -9.255963e+061 result=40 05:36:54 Get A/D value=-858993460 result=40 05:36:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:54 Aux= 05:36:54 Message to Camera, serial 211173 queued 05:37:31 Received message from Master: op=PointingHead serial=211186 05:37:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:37:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:37:31 Point started: ret=0 05:37:31 point_skyscan result=0 05:37:32 Check angles 05:37:32 SkyScan query 05:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 05:37:33 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 05:37:33 Check angles 05:37:33 SkyScan query 05:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:37:33 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:37:33 Message to Master queued w/err=0: serial=211186 error=0 05:37:38 Received message from Master: op=Filter serial=211187 05:37:38 Color wheel filter change from 0 to 0 05:37:38 FLIGetFilterPos err=0 currentPosition=0 05:37:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:38 Filter is already there-color wheel unchanged 05:37:38 Received message from Master: op=Shutter serial=211188 05:37:38 Shutter LASER open 05:37:39 Received message from Camera: op=State serial=211190 05:37:39 GetSingleValue result=40 Value=cccccccc 05:37:39 SkyScan query 05:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:37:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:39 Parameters OK 05:37:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:39 Set A/D data flow result=40 05:37:39 Set A/D channel type result=40 05:37:39 Set A/D encoding result=40 05:37:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:39 Set channel filter=0.000000e+000 result=40 05:37:39 Config A/D Result=40 05:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:39 Get A/D filter: -9.255963e+061 result=40 05:37:39 Get A/D value=-858993460 result=40 05:37:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:39 Parameters OK 05:37:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:39 Set A/D data flow result=40 05:37:39 Set A/D channel type result=40 05:37:39 Set A/D encoding result=40 05:37:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:39 Set channel filter=0.000000e+000 result=40 05:37:39 Config A/D Result=40 05:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:39 Get A/D filter: -9.255963e+061 result=40 05:37:39 Get A/D value=-858993460 result=40 05:37:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:39 Aux= 05:37:39 Message to Camera, serial 211190 queued 05:37:48 Received message from Master: op=Shutter serial=211200 05:37:48 Shutter LASER close 05:37:48 Received message from Master: op=PointingHead serial=211204 05:37:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:37:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:37:49 Point started: ret=0 05:37:49 point_skyscan result=0 05:37:49 Check angles 05:37:49 SkyScan query 05:37:50 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.815<-21521 Statuses=0009 0009 05:37:50 Msec=0 True Az=136.35 Ze=-142.815 Az status=0009 Ze status=0009 05:37:50 Check angles 05:37:50 SkyScan query 05:37:51 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.845<-20123 Statuses=0009 0009 05:37:51 Msec=750 True Az=153.81 Ze=-121.845 Az status=0009 Ze status=0009 05:37:51 Check angles 05:37:51 SkyScan query 05:37:51 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.875<-18725 Statuses=0009 0009 05:37:51 Msec=1500 True Az=171.42 Ze=-100.875 Az status=0009 Ze status=0009 05:37:52 Check angles 05:37:52 SkyScan query 05:37:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.485<-17299 Statuses=0008 0009 05:37:52 Msec=2250 True Az=176.01 Ze=-79.485 Az status=0008 Ze status=0009 05:37:52 Check angles 05:37:52 SkyScan query 05:37:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.515<-15901 Statuses=0008 0009 05:37:53 Msec=3000 True Az=176.01 Ze=-58.515 Az status=0008 Ze status=0009 05:37:53 Check angles 05:37:53 SkyScan query 05:37:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:37:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:37:54 Message to Master queued w/err=0: serial=211204 error=0 05:37:59 Received message from Master: op=Filter serial=211205 05:37:59 Color wheel filter change from 0 to 0 05:37:59 FLIGetFilterPos err=0 currentPosition=0 05:37:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:59 Filter is already there-color wheel unchanged 05:37:59 Received message from Master: op=Shutter serial=211206 05:37:59 Shutter LASER close 05:37:59 Received message from Camera: op=State serial=211208 05:37:59 GetSingleValue result=40 Value=cccccccc 05:37:59 SkyScan query 05:38:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:38:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:00 Parameters OK 05:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:00 Set A/D data flow result=40 05:38:00 Set A/D channel type result=40 05:38:00 Set A/D encoding result=40 05:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:00 Set channel filter=0.000000e+000 result=40 05:38:00 Config A/D Result=40 05:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:00 Get A/D filter: -9.255963e+061 result=40 05:38:00 Get A/D value=-858993460 result=40 05:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:00 Parameters OK 05:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:00 Set A/D data flow result=40 05:38:00 Set A/D channel type result=40 05:38:00 Set A/D encoding result=40 05:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:00 Set channel filter=0.000000e+000 result=40 05:38:00 Config A/D Result=40 05:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:00 Get A/D filter: -9.255963e+061 result=40 05:38:00 Get A/D value=-858993460 result=40 05:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:00 Aux= 05:38:00 Message to Camera, serial 211208 queued 05:38:37 Received message from Master: op=PointingHead serial=211221 05:38:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:38:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:38:37 Point started: ret=0 05:38:37 point_skyscan result=0 05:38:38 Check angles 05:38:38 SkyScan query 05:38:38 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.855<-13457 Statuses=0009 0009 05:38:38 Msec=0 True Az=153.09 Ze=-21.855 Az status=0009 Ze status=0009 05:38:38 Check angles 05:38:38 SkyScan query 05:38:39 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.84<-12056 Statuses=0009 0009 05:38:39 Msec=750 True Az=135.675 Ze=-0.84 Az status=0009 Ze status=0009 05:38:39 Check angles 05:38:39 SkyScan query 05:38:40 SkyScan query done: ret=0 az=118.095<-7873 ze=20.055<-10663 Statuses=0009 0009 05:38:40 Msec=1500 True Az=118.095 Ze=20.055 Az status=0009 Ze status=0009 05:38:40 Check angles 05:38:40 SkyScan query 05:38:41 SkyScan query done: ret=0 az=100.755<-6717 ze=41.055<-9263 Statuses=0009 0009 05:38:41 Msec=2250 True Az=100.755 Ze=41.055 Az status=0009 Ze status=0009 05:38:41 Check angles 05:38:41 SkyScan query 05:38:41 SkyScan query done: ret=0 az=85.98<-5732 ze=51.6<-8560 Statuses=0009 0008 05:38:41 Msec=3000 True Az=85.98 Ze=51.6 Az status=0009 Ze status=0008 05:38:41 Check angles 05:38:41 SkyScan query 05:38:42 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 05:38:42 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 05:38:42 Message to Master queued w/err=0: serial=211221 error=0 05:38:47 Received message from Master: op=Filter serial=211222 05:38:47 Color wheel filter change from 0 to 0 05:38:47 FLIGetFilterPos err=0 currentPosition=0 05:38:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:47 Filter is already there-color wheel unchanged 05:38:47 Received message from Master: op=Shutter serial=211223 05:38:47 Shutter LASER close 05:38:47 Received message from Camera: op=State serial=211225 05:38:47 GetSingleValue result=40 Value=cccccccc 05:38:47 SkyScan query 05:38:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:38:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:48 Parameters OK 05:38:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:48 Set A/D data flow result=40 05:38:48 Set A/D channel type result=40 05:38:48 Set A/D encoding result=40 05:38:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:48 Set channel filter=0.000000e+000 result=40 05:38:48 Config A/D Result=40 05:38:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:48 Get A/D filter: -9.255963e+061 result=40 05:38:48 Get A/D value=-858993460 result=40 05:38:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:48 Parameters OK 05:38:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:48 Set A/D data flow result=40 05:38:48 Set A/D channel type result=40 05:38:48 Set A/D encoding result=40 05:38:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:48 Set channel filter=0.000000e+000 result=40 05:38:48 Config A/D Result=40 05:38:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:48 Get A/D filter: -9.255963e+061 result=40 05:38:48 Get A/D value=-858993460 result=40 05:38:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:48 Aux= 05:38:48 Message to Camera, serial 211225 queued 05:39:25 Received message from Master: op=PointingHead serial=211238 05:39:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:39:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:39:25 Point started: ret=0 05:39:25 point_skyscan result=0 05:39:26 Check angles 05:39:26 SkyScan query 05:39:26 SkyScan query done: ret=0 az=85.995<-5733 ze=21.225<-10585 Statuses=0008 0009 05:39:26 Msec=0 True Az=85.995 Ze=21.225 Az status=0008 Ze status=0009 05:39:27 Check angles 05:39:27 SkyScan query 05:39:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.18<-12012 Statuses=0008 0009 05:39:27 Msec=750 True Az=85.995 Ze=-0.18 Az status=0008 Ze status=0009 05:39:27 Check angles 05:39:27 SkyScan query 05:39:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.09<-13406 Statuses=0008 0009 05:39:28 Msec=1500 True Az=85.995 Ze=-21.09 Az status=0008 Ze status=0009 05:39:28 Check angles 05:39:28 SkyScan query 05:39:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.09<-14806 Statuses=0008 0009 05:39:29 Msec=2250 True Az=85.995 Ze=-42.09 Az status=0008 Ze status=0009 05:39:29 Check angles 05:39:29 SkyScan query 05:39:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:39:29 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:39:29 Message to Master queued w/err=0: serial=211238 error=0 05:39:34 Received message from Master: op=Filter serial=211239 05:39:34 Color wheel filter change from 0 to 0 05:39:34 FLIGetFilterPos err=0 currentPosition=0 05:39:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:34 Filter is already there-color wheel unchanged 05:39:35 Received message from Master: op=Shutter serial=211240 05:39:35 Shutter LASER close 05:39:35 Received message from Camera: op=State serial=211242 05:39:35 GetSingleValue result=40 Value=cccccccc 05:39:35 SkyScan query 05:39:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:39:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:35 Parameters OK 05:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:35 Set A/D data flow result=40 05:39:35 Set A/D channel type result=40 05:39:35 Set A/D encoding result=40 05:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:35 Set channel filter=0.000000e+000 result=40 05:39:35 Config A/D Result=40 05:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:35 Get A/D filter: -9.255963e+061 result=40 05:39:35 Get A/D value=-858993460 result=40 05:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:35 Parameters OK 05:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:35 Set A/D data flow result=40 05:39:35 Set A/D channel type result=40 05:39:35 Set A/D encoding result=40 05:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:35 Set channel filter=0.000000e+000 result=40 05:39:35 Config A/D Result=40 05:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:35 Get A/D filter: -9.255963e+061 result=40 05:39:35 Get A/D value=-858993460 result=40 05:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:35 Aux= 05:39:35 Message to Camera, serial 211242 queued 05:40:12 Received message from Master: op=PointingHead serial=211255 05:40:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:40:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:40:12 Point started: ret=0 05:40:12 point_skyscan result=0 05:40:13 Check angles 05:40:13 SkyScan query 05:40:14 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.075<-17405 Statuses=0009 0009 05:40:14 Msec=0 True Az=108.795 Ze=-81.075 Az status=0009 Ze status=0009 05:40:14 Check angles 05:40:14 SkyScan query 05:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 05:40:15 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 05:40:15 Check angles 05:40:15 SkyScan query 05:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 05:40:15 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 05:40:16 Check angles 05:40:16 SkyScan query 05:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.855<-21657 Statuses=0008 0009 05:40:16 Msec=2250 True Az=112.995 Ze=-144.855 Az status=0008 Ze status=0009 05:40:16 Check angles 05:40:16 SkyScan query 05:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 05:40:17 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 05:40:17 Check angles 05:40:17 SkyScan query 05:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:40:18 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:40:18 Message to Master queued w/err=0: serial=211255 error=0 05:40:23 Received message from Master: op=Filter serial=211256 05:40:23 Color wheel filter change from 0 to 0 05:40:23 FLIGetFilterPos err=0 currentPosition=0 05:40:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:23 Filter is already there-color wheel unchanged 05:40:23 Received message from Master: op=Shutter serial=211257 05:40:23 Shutter LASER open 05:40:23 Received message from Camera: op=State serial=211259 05:40:23 GetSingleValue result=40 Value=cccccccc 05:40:23 SkyScan query 05:40:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:40:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:24 Parameters OK 05:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:24 Set A/D data flow result=40 05:40:24 Set A/D channel type result=40 05:40:24 Set A/D encoding result=40 05:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:24 Set channel filter=0.000000e+000 result=40 05:40:24 Config A/D Result=40 05:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:24 Get A/D filter: -9.255963e+061 result=40 05:40:24 Get A/D value=-858993460 result=40 05:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:24 Parameters OK 05:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:24 Set A/D data flow result=40 05:40:24 Set A/D channel type result=40 05:40:24 Set A/D encoding result=40 05:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:24 Set channel filter=0.000000e+000 result=40 05:40:24 Config A/D Result=40 05:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:24 Get A/D filter: -9.255963e+061 result=40 05:40:24 Get A/D value=-858993460 result=40 05:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:24 Aux= 05:40:24 Message to Camera, serial 211259 queued 05:40:32 Received message from Master: op=Shutter serial=211269 05:40:32 Shutter LASER close 05:40:32 Received message from Master: op=PointingHead serial=211273 05:40:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:40:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:40:33 Point started: ret=0 05:40:33 point_skyscan result=0 05:40:33 Check angles 05:40:33 SkyScan query 05:40:34 SkyScan query done: ret=0 az=89.835<-5989 ze=157.14<-1524 Statuses=0009 0009 05:40:34 Msec=0 True Az=89.835 Ze=157.14 Az status=0009 Ze status=0009 05:40:34 Check angles 05:40:34 SkyScan query 05:40:35 SkyScan query done: ret=0 az=71.97<-4798 ze=135.75<-2950 Statuses=0009 0009 05:40:35 Msec=750 True Az=71.97 Ze=135.75 Az status=0009 Ze status=0009 05:40:35 Check angles 05:40:35 SkyScan query 05:40:36 SkyScan query done: ret=0 az=54.63<-3642 ze=114.78<-4348 Statuses=0009 0009 05:40:36 Msec=1500 True Az=54.63 Ze=114.78 Az status=0009 Ze status=0009 05:40:36 Check angles 05:40:36 SkyScan query 05:40:36 SkyScan query done: ret=0 az=41.025<-2735 ze=93.84<-5744 Statuses=0009 0009 05:40:36 Msec=2250 True Az=41.025 Ze=93.84 Az status=0009 Ze status=0009 05:40:37 Check angles 05:40:37 SkyScan query 05:40:37 SkyScan query done: ret=0 az=40.98<-2732 ze=72.42<-7172 Statuses=0008 0009 05:40:37 Msec=3000 True Az=40.98 Ze=72.42 Az status=0008 Ze status=0009 05:40:37 Check angles 05:40:37 SkyScan query 05:40:38 SkyScan query done: ret=0 az=40.98<-2732 ze=52.05<-8530 Statuses=0008 0009 05:40:38 Msec=3750 True Az=40.98 Ze=52.05 Az status=0008 Ze status=0009 05:40:38 Check angles 05:40:38 SkyScan query 05:40:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:40:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:40:39 Message to Master queued w/err=0: serial=211273 error=0 05:40:44 Received message from Master: op=Filter serial=211274 05:40:44 Color wheel filter change from 0 to 0 05:40:44 FLIGetFilterPos err=0 currentPosition=0 05:40:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:44 Filter is already there-color wheel unchanged 05:40:44 Received message from Master: op=Shutter serial=211275 05:40:44 Shutter LASER close 05:40:44 Received message from Camera: op=State serial=211277 05:40:44 GetSingleValue result=40 Value=cccccccc 05:40:44 SkyScan query 05:40:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:40:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:45 Parameters OK 05:40:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:45 Set A/D data flow result=40 05:40:45 Set A/D channel type result=40 05:40:45 Set A/D encoding result=40 05:40:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:45 Set channel filter=0.000000e+000 result=40 05:40:45 Config A/D Result=40 05:40:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:45 Get A/D filter: -9.255963e+061 result=40 05:40:45 Get A/D value=-858993460 result=40 05:40:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:45 Parameters OK 05:40:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:45 Set A/D data flow result=40 05:40:45 Set A/D channel type result=40 05:40:45 Set A/D encoding result=40 05:40:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:45 Set channel filter=0.000000e+000 result=40 05:40:45 Config A/D Result=40 05:40:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:45 Get A/D filter: -9.255963e+061 result=40 05:40:45 Get A/D value=-858993460 result=40 05:40:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:45 Aux= 05:40:45 Message to Camera, serial 211277 queued 05:41:22 Received message from Master: op=PointingHead serial=211290 05:41:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:41:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:41:22 Point started: ret=0 05:41:22 point_skyscan result=0 05:41:23 Check angles 05:41:23 SkyScan query 05:41:23 SkyScan query done: ret=0 az=64.38<-4292 ze=81.795<-6547 Statuses=0009 0009 05:41:23 Msec=0 True Az=64.38 Ze=81.795 Az status=0009 Ze status=0009 05:41:23 Check angles 05:41:23 SkyScan query 05:41:24 SkyScan query done: ret=0 az=81.795<-5453 ze=102.735<-5151 Statuses=0009 0009 05:41:24 Msec=750 True Az=81.795 Ze=102.735 Az status=0009 Ze status=0009 05:41:24 Check angles 05:41:24 SkyScan query 05:41:25 SkyScan query done: ret=0 az=99.375<-6625 ze=123.675<-3755 Statuses=0009 0009 05:41:25 Msec=1500 True Az=99.375 Ze=123.675 Az status=0009 Ze status=0009 05:41:25 Check angles 05:41:25 SkyScan query 05:41:26 SkyScan query done: ret=0 az=116.82<-7788 ze=144.63<-2358 Statuses=0009 0009 05:41:26 Msec=2250 True Az=116.82 Ze=144.63 Az status=0009 Ze status=0009 05:41:26 Check angles 05:41:26 SkyScan query 05:41:26 SkyScan query done: ret=0 az=131.055<-8737 ze=165.555<-963 Statuses=0009 0009 05:41:26 Msec=3000 True Az=131.055 Ze=165.555 Az status=0009 Ze status=0009 05:41:26 Check angles 05:41:26 SkyScan query 05:41:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.46<-23564 Statuses=0008 0009 05:41:27 Msec=3750 True Az=131.01 Ze=-173.46 Az status=0008 Ze status=0009 05:41:27 Check angles 05:41:27 SkyScan query 05:41:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.505<-22167 Statuses=0008 0009 05:41:28 Msec=4500 True Az=130.995 Ze=-152.505 Az status=0008 Ze status=0009 05:41:28 Check angles 05:41:28 SkyScan query 05:41:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 05:41:29 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 05:41:29 Message to Master queued w/err=0: serial=211290 error=0 05:41:34 Received message from Master: op=Filter serial=211291 05:41:34 Color wheel filter change from 0 to 0 05:41:34 FLIGetFilterPos err=0 currentPosition=0 05:41:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:34 Filter is already there-color wheel unchanged 05:41:34 Received message from Master: op=Shutter serial=211292 05:41:34 Shutter LASER close 05:41:34 Received message from Camera: op=State serial=211294 05:41:34 GetSingleValue result=40 Value=cccccccc 05:41:34 SkyScan query 05:41:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:41:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:34 Parameters OK 05:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:34 Set A/D data flow result=40 05:41:34 Set A/D channel type result=40 05:41:34 Set A/D encoding result=40 05:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:34 Set channel filter=0.000000e+000 result=40 05:41:34 Config A/D Result=40 05:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:34 Get A/D filter: -9.255963e+061 result=40 05:41:34 Get A/D value=-858993460 result=40 05:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:34 Parameters OK 05:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:34 Set A/D data flow result=40 05:41:34 Set A/D channel type result=40 05:41:34 Set A/D encoding result=40 05:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:34 Set channel filter=0.000000e+000 result=40 05:41:34 Config A/D Result=40 05:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:34 Get A/D filter: -9.255963e+061 result=40 05:41:34 Get A/D value=-858993460 result=40 05:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:34 Aux= 05:41:34 Message to Camera, serial 211294 queued 05:42:11 Received message from Master: op=PointingHead serial=211307 05:42:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:42:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:42:11 Point started: ret=0 05:42:11 point_skyscan result=0 05:42:12 Check angles 05:42:12 SkyScan query 05:42:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 05:42:13 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 05:42:13 Check angles 05:42:13 SkyScan query 05:42:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:42:14 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:42:14 Message to Master queued w/err=0: serial=211307 error=0 05:42:19 Received message from Master: op=Filter serial=211308 05:42:19 Color wheel filter change from 0 to 0 05:42:19 FLIGetFilterPos err=0 currentPosition=0 05:42:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:19 Filter is already there-color wheel unchanged 05:42:19 Received message from Master: op=Shutter serial=211309 05:42:19 Shutter LASER open 05:42:19 Received message from Camera: op=State serial=211311 05:42:19 GetSingleValue result=40 Value=cccccccc 05:42:19 SkyScan query 05:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:42:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:20 Parameters OK 05:42:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:20 Set A/D data flow result=40 05:42:20 Set A/D channel type result=40 05:42:20 Set A/D encoding result=40 05:42:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:20 Set channel filter=0.000000e+000 result=40 05:42:20 Config A/D Result=40 05:42:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:20 Get A/D filter: -9.255963e+061 result=40 05:42:20 Get A/D value=-858993460 result=40 05:42:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:20 Parameters OK 05:42:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:20 Set A/D data flow result=40 05:42:20 Set A/D channel type result=40 05:42:20 Set A/D encoding result=40 05:42:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:20 Set channel filter=0.000000e+000 result=40 05:42:20 Config A/D Result=40 05:42:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:20 Get A/D filter: -9.255963e+061 result=40 05:42:20 Get A/D value=-858993460 result=40 05:42:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:20 Aux= 05:42:20 Message to Camera, serial 211311 queued 05:42:28 Received message from Master: op=Shutter serial=211321 05:42:28 Shutter LASER close 05:42:29 Received message from Master: op=PointingHead serial=211325 05:42:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:42:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:42:29 Point started: ret=0 05:42:29 point_skyscan result=0 05:42:30 Check angles 05:42:30 SkyScan query 05:42:30 SkyScan query done: ret=0 az=135.87<-9058 ze=-143.28<-21552 Statuses=0009 0009 05:42:30 Msec=0 True Az=135.87 Ze=-143.28 Az status=0009 Ze status=0009 05:42:30 Check angles 05:42:30 SkyScan query 05:42:31 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.325<-20155 Statuses=0009 0009 05:42:31 Msec=750 True Az=153.48 Ze=-122.325 Az status=0009 Ze status=0009 05:42:31 Check angles 05:42:31 SkyScan query 05:42:32 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.445<-18763 Statuses=0009 0009 05:42:32 Msec=1500 True Az=170.955 Ze=-101.445 Az status=0009 Ze status=0009 05:42:32 Check angles 05:42:32 SkyScan query 05:42:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.445<-17363 Statuses=0008 0009 05:42:33 Msec=2250 True Az=175.995 Ze=-80.445 Az status=0008 Ze status=0009 05:42:33 Check angles 05:42:33 SkyScan query 05:42:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.475<-15965 Statuses=0008 0009 05:42:33 Msec=3000 True Az=175.995 Ze=-59.475 Az status=0008 Ze status=0009 05:42:33 Check angles 05:42:33 SkyScan query 05:42:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:42:34 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:42:34 Message to Master queued w/err=0: serial=211325 error=0 05:42:39 Received message from Master: op=Filter serial=211326 05:42:39 Color wheel filter change from 0 to 0 05:42:39 FLIGetFilterPos err=0 currentPosition=0 05:42:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:39 Filter is already there-color wheel unchanged 05:42:39 Received message from Master: op=Shutter serial=211327 05:42:39 Shutter LASER close 05:42:39 Received message from Camera: op=State serial=211329 05:42:39 GetSingleValue result=40 Value=cccccccc 05:42:39 SkyScan query 05:42:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:42:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:40 Parameters OK 05:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:40 Set A/D data flow result=40 05:42:40 Set A/D channel type result=40 05:42:40 Set A/D encoding result=40 05:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:40 Set channel filter=0.000000e+000 result=40 05:42:40 Config A/D Result=40 05:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:40 Get A/D filter: -9.255963e+061 result=40 05:42:40 Get A/D value=-858993460 result=40 05:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:40 Parameters OK 05:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:40 Set A/D data flow result=40 05:42:40 Set A/D channel type result=40 05:42:40 Set A/D encoding result=40 05:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:40 Set channel filter=0.000000e+000 result=40 05:42:40 Config A/D Result=40 05:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:40 Get A/D filter: -9.255963e+061 result=40 05:42:40 Get A/D value=-858993460 result=40 05:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:40 Aux= 05:42:40 Message to Camera, serial 211329 queued 05:43:17 Received message from Master: op=PointingHead serial=211342 05:43:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:43:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:43:17 Point started: ret=0 05:43:17 point_skyscan result=0 05:43:18 Check angles 05:43:18 SkyScan query 05:43:18 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.435<-13429 Statuses=0009 0009 05:43:18 Msec=0 True Az=152.655 Ze=-21.435 Az status=0009 Ze status=0009 05:43:19 Check angles 05:43:19 SkyScan query 05:43:19 SkyScan query done: ret=0 az=134.775<-8985 ze=-0.045<-12003 Statuses=0009 0009 05:43:19 Msec=750 True Az=134.775 Ze=-0.045 Az status=0009 Ze status=0009 05:43:19 Check angles 05:43:19 SkyScan query 05:43:20 SkyScan query done: ret=0 az=117.345<-7823 ze=20.94<-10604 Statuses=0009 0009 05:43:20 Msec=1500 True Az=117.345 Ze=20.94 Az status=0009 Ze status=0009 05:43:20 Check angles 05:43:20 SkyScan query 05:43:21 SkyScan query done: ret=0 az=99.885<-6659 ze=41.835<-9211 Statuses=0009 0009 05:43:21 Msec=2250 True Az=99.885 Ze=41.835 Az status=0009 Ze status=0009 05:43:21 Check angles 05:43:21 SkyScan query 05:43:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 05:43:21 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 05:43:22 Check angles 05:43:22 SkyScan query 05:43:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 05:43:22 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 05:43:22 Message to Master queued w/err=0: serial=211342 error=0 05:43:27 Received message from Master: op=Filter serial=211343 05:43:27 Color wheel filter change from 0 to 0 05:43:27 FLIGetFilterPos err=0 currentPosition=0 05:43:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:27 Filter is already there-color wheel unchanged 05:43:27 Received message from Master: op=Shutter serial=211344 05:43:27 Shutter LASER close 05:43:27 Received message from Camera: op=State serial=211346 05:43:27 GetSingleValue result=40 Value=cccccccc 05:43:27 SkyScan query 05:43:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 05:43:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:28 Parameters OK 05:43:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:28 Set A/D data flow result=40 05:43:28 Set A/D channel type result=40 05:43:28 Set A/D encoding result=40 05:43:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:28 Set channel filter=0.000000e+000 result=40 05:43:28 Config A/D Result=40 05:43:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:28 Get A/D filter: -9.255963e+061 result=40 05:43:28 Get A/D value=-858993460 result=40 05:43:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:28 Parameters OK 05:43:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:28 Set A/D data flow result=40 05:43:28 Set A/D channel type result=40 05:43:28 Set A/D encoding result=40 05:43:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:28 Set channel filter=0.000000e+000 result=40 05:43:28 Config A/D Result=40 05:43:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:28 Get A/D filter: -9.255963e+061 result=40 05:43:28 Get A/D value=-858993460 result=40 05:43:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:28 Aux= 05:43:28 Message to Camera, serial 211346 queued 05:44:05 Received message from Master: op=PointingHead serial=211359 05:44:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:44:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:44:05 Point started: ret=0 05:44:05 point_skyscan result=0 05:44:06 Check angles 05:44:06 SkyScan query 05:44:07 SkyScan query done: ret=0 az=85.995<-5733 ze=21.87<-10542 Statuses=0008 0009 05:44:07 Msec=0 True Az=85.995 Ze=21.87 Az status=0008 Ze status=0009 05:44:07 Check angles 05:44:07 SkyScan query 05:44:07 SkyScan query done: ret=0 az=85.995<-5733 ze=0.96<-11936 Statuses=0008 0009 05:44:07 Msec=750 True Az=85.995 Ze=0.96 Az status=0008 Ze status=0009 05:44:08 Check angles 05:44:08 SkyScan query 05:44:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.025<-13335 Statuses=0008 0009 05:44:08 Msec=1500 True Az=85.995 Ze=-20.025 Az status=0008 Ze status=0009 05:44:08 Check angles 05:44:08 SkyScan query 05:44:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-40.95<-14730 Statuses=0008 0009 05:44:09 Msec=2250 True Az=85.995 Ze=-40.95 Az status=0008 Ze status=0009 05:44:09 Check angles 05:44:09 SkyScan query 05:44:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:44:10 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:44:10 Message to Master queued w/err=0: serial=211359 error=0 05:44:15 Received message from Master: op=Filter serial=211360 05:44:15 Color wheel filter change from 0 to 0 05:44:15 FLIGetFilterPos err=0 currentPosition=0 05:44:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:15 Filter is already there-color wheel unchanged 05:44:15 Received message from Master: op=Shutter serial=211361 05:44:15 Shutter LASER close 05:44:15 Received message from Camera: op=State serial=211363 05:44:15 GetSingleValue result=40 Value=cccccccc 05:44:15 SkyScan query 05:44:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:44:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:15 Parameters OK 05:44:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:15 Set A/D data flow result=40 05:44:15 Set A/D channel type result=40 05:44:15 Set A/D encoding result=40 05:44:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:15 Set channel filter=0.000000e+000 result=40 05:44:15 Config A/D Result=40 05:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:15 Get A/D filter: -9.255963e+061 result=40 05:44:15 Get A/D value=-858993460 result=40 05:44:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:15 Parameters OK 05:44:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:15 Set A/D data flow result=40 05:44:15 Set A/D channel type result=40 05:44:15 Set A/D encoding result=40 05:44:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:15 Set channel filter=0.000000e+000 result=40 05:44:15 Config A/D Result=40 05:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:15 Get A/D filter: -9.255963e+061 result=40 05:44:15 Get A/D value=-858993460 result=40 05:44:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:15 Aux= 05:44:15 Message to Camera, serial 211363 queued 05:44:52 Received message from Master: op=PointingHead serial=211376 05:44:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:44:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:44:53 Point started: ret=0 05:44:53 point_skyscan result=0 05:44:53 Check angles 05:44:53 SkyScan query 05:44:54 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.525<-17435 Statuses=0009 0009 05:44:54 Msec=0 True Az=109.2 Ze=-81.525 Az status=0009 Ze status=0009 05:44:54 Check angles 05:44:54 SkyScan query 05:44:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 05:44:55 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 05:44:55 Check angles 05:44:55 SkyScan query 05:44:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 05:44:55 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 05:44:56 Check angles 05:44:56 SkyScan query 05:44:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 05:44:56 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 05:44:56 Check angles 05:44:56 SkyScan query 05:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 05:44:57 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 05:44:57 Check angles 05:44:57 SkyScan query 05:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:44:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:44:58 Message to Master queued w/err=0: serial=211376 error=0 05:45:03 Received message from Master: op=Filter serial=211377 05:45:03 Color wheel filter change from 0 to 0 05:45:03 FLIGetFilterPos err=0 currentPosition=0 05:45:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:03 Filter is already there-color wheel unchanged 05:45:03 Received message from Master: op=Shutter serial=211378 05:45:03 Shutter LASER open 05:45:03 Received message from Camera: op=State serial=211380 05:45:03 GetSingleValue result=40 Value=cccccccc 05:45:03 SkyScan query 05:45:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:45:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:04 Parameters OK 05:45:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:04 Set A/D data flow result=40 05:45:04 Set A/D channel type result=40 05:45:04 Set A/D encoding result=40 05:45:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:04 Set channel filter=0.000000e+000 result=40 05:45:04 Config A/D Result=40 05:45:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:04 Get A/D filter: -9.255963e+061 result=40 05:45:04 Get A/D value=-858993460 result=40 05:45:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:04 Parameters OK 05:45:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:04 Set A/D data flow result=40 05:45:04 Set A/D channel type result=40 05:45:04 Set A/D encoding result=40 05:45:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:04 Set channel filter=0.000000e+000 result=40 05:45:04 Config A/D Result=40 05:45:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:04 Get A/D filter: -9.255963e+061 result=40 05:45:04 Get A/D value=-858993460 result=40 05:45:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:04 Aux= 05:45:04 Message to Camera, serial 211380 queued 05:45:12 Received message from Master: op=Shutter serial=211390 05:45:12 Shutter LASER close 05:45:12 Received message from Master: op=PointingHead serial=211394 05:45:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:45:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:45:13 Point started: ret=0 05:45:13 point_skyscan result=0 05:45:14 Check angles 05:45:14 SkyScan query 05:45:14 SkyScan query done: ret=0 az=90.15<-6010 ze=157.485<-1501 Statuses=0009 0009 05:45:14 Msec=0 True Az=90.15 Ze=157.485 Az status=0009 Ze status=0009 05:45:14 Check angles 05:45:14 SkyScan query 05:45:15 SkyScan query done: ret=0 az=72.675<-4845 ze=136.515<-2899 Statuses=0009 0009 05:45:15 Msec=750 True Az=72.675 Ze=136.515 Az status=0009 Ze status=0009 05:45:15 Check angles 05:45:15 SkyScan query 05:45:16 SkyScan query done: ret=0 az=54.945<-3663 ze=115.17<-4322 Statuses=0009 0009 05:45:16 Msec=1500 True Az=54.945 Ze=115.17 Az status=0009 Ze status=0009 05:45:16 Check angles [UTC 2018-12-17 05:45:16] 05:45:16 SkyScan query 05:45:16 SkyScan query done: ret=0 az=40.98<-2732 ze=92.445<-5837 Statuses=0009 0009 05:45:16 Msec=2250 True Az=40.98 Ze=92.445 Az status=0009 Ze status=0009 05:45:17 Check angles 05:45:17 SkyScan query 05:45:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.215<-7119 Statuses=0008 0009 05:45:17 Msec=3000 True Az=40.995 Ze=73.215 Az status=0008 Ze status=0009 05:45:17 Check angles 05:45:17 SkyScan query 05:45:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 05:45:18 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 05:45:18 Check angles 05:45:18 SkyScan query 05:45:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:45:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:45:19 Message to Master queued w/err=0: serial=211394 error=0 05:45:24 Received message from Master: op=Filter serial=211395 05:45:24 Color wheel filter change from 0 to 0 05:45:24 FLIGetFilterPos err=0 currentPosition=0 05:45:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:24 Filter is already there-color wheel unchanged 05:45:24 Received message from Master: op=Shutter serial=211396 05:45:24 Shutter LASER close 05:45:24 Received message from Camera: op=State serial=211398 05:45:24 GetSingleValue result=40 Value=cccccccc 05:45:24 SkyScan query 05:45:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:45:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:25 Parameters OK 05:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:25 Set A/D data flow result=40 05:45:25 Set A/D channel type result=40 05:45:25 Set A/D encoding result=40 05:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:25 Set channel filter=0.000000e+000 result=40 05:45:25 Config A/D Result=40 05:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:25 Get A/D filter: -9.255963e+061 result=40 05:45:25 Get A/D value=-858993460 result=40 05:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:25 Parameters OK 05:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:25 Set A/D data flow result=40 05:45:25 Set A/D channel type result=40 05:45:25 Set A/D encoding result=40 05:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:25 Set channel filter=0.000000e+000 result=40 05:45:25 Config A/D Result=40 05:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:25 Get A/D filter: -9.255963e+061 result=40 05:45:25 Get A/D value=-858993460 result=40 05:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:25 Aux= 05:45:25 Message to Camera, serial 211398 queued 05:45:27 Received message from Master: op=Identify serial=211399 05:46:02 Received message from Master: op=PointingHead serial=211414 05:46:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:46:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:46:02 Point started: ret=0 05:46:02 point_skyscan result=0 05:46:03 Check angles 05:46:03 SkyScan query 05:46:03 SkyScan query done: ret=0 az=64.11<-4274 ze=81.375<-6575 Statuses=0009 0009 05:46:03 Msec=0 True Az=64.11 Ze=81.375 Az status=0009 Ze status=0009 05:46:04 Check angles 05:46:04 SkyScan query 05:46:04 SkyScan query done: ret=0 az=81.795<-5453 ze=102.735<-5151 Statuses=0009 0009 05:46:04 Msec=750 True Az=81.795 Ze=102.735 Az status=0009 Ze status=0009 05:46:04 Check angles 05:46:04 SkyScan query 05:46:05 SkyScan query done: ret=0 az=99.285<-6619 ze=123.675<-3755 Statuses=0009 0009 05:46:05 Msec=1500 True Az=99.285 Ze=123.675 Az status=0009 Ze status=0009 05:46:05 Check angles 05:46:05 SkyScan query 05:46:06 SkyScan query done: ret=0 az=116.79<-7786 ze=144.615<-2359 Statuses=0009 0009 05:46:06 Msec=2250 True Az=116.79 Ze=144.615 Az status=0009 Ze status=0009 05:46:06 Check angles 05:46:06 SkyScan query 05:46:06 SkyScan query done: ret=0 az=131.085<-8739 ze=165.57<-962 Statuses=0009 0009 05:46:06 Msec=3000 True Az=131.085 Ze=165.57 Az status=0009 Ze status=0009 05:46:07 Check angles 05:46:07 SkyScan query 05:46:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.01<-23534 Statuses=0008 0009 05:46:07 Msec=3750 True Az=131.01 Ze=-173.01 Az status=0008 Ze status=0009 05:46:07 Check angles 05:46:07 SkyScan query 05:46:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.07<-22138 Statuses=0008 0009 05:46:08 Msec=4500 True Az=130.995 Ze=-152.07 Az status=0008 Ze status=0009 05:46:08 Check angles 05:46:08 SkyScan query 05:46:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 05:46:09 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 05:46:09 Message to Master queued w/err=0: serial=211414 error=0 05:46:14 Received message from Master: op=Filter serial=211415 05:46:14 Color wheel filter change from 0 to 0 05:46:14 FLIGetFilterPos err=0 currentPosition=0 05:46:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:14 Filter is already there-color wheel unchanged 05:46:14 Received message from Master: op=Shutter serial=211416 05:46:14 Shutter LASER close 05:46:14 Received message from Camera: op=State serial=211418 05:46:14 GetSingleValue result=40 Value=cccccccc 05:46:14 SkyScan query 05:46:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:46:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:14 Parameters OK 05:46:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:14 Set A/D data flow result=40 05:46:14 Set A/D channel type result=40 05:46:14 Set A/D encoding result=40 05:46:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:14 Set channel filter=0.000000e+000 result=40 05:46:14 Config A/D Result=40 05:46:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:14 Get A/D filter: -9.255963e+061 result=40 05:46:14 Get A/D value=-858993460 result=40 05:46:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:14 Parameters OK 05:46:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:14 Set A/D data flow result=40 05:46:14 Set A/D channel type result=40 05:46:14 Set A/D encoding result=40 05:46:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:14 Set channel filter=0.000000e+000 result=40 05:46:14 Config A/D Result=40 05:46:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:14 Get A/D filter: -9.255963e+061 result=40 05:46:14 Get A/D value=-858993460 result=40 05:46:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:14 Aux= 05:46:14 Message to Camera, serial 211418 queued 05:46:51 Received message from Master: op=PointingHead serial=211431 05:46:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:46:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:46:52 Point started: ret=0 05:46:52 point_skyscan result=0 05:46:52 Check angles 05:46:52 SkyScan query 05:46:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 05:46:53 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 05:46:53 Check angles 05:46:53 SkyScan query 05:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:46:54 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:46:54 Message to Master queued w/err=0: serial=211431 error=0 05:46:59 Received message from Master: op=Filter serial=211432 05:46:59 Color wheel filter change from 0 to 0 05:46:59 FLIGetFilterPos err=0 currentPosition=0 05:46:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:59 Filter is already there-color wheel unchanged 05:46:59 Received message from Master: op=Shutter serial=211433 05:46:59 Shutter LASER open 05:46:59 Received message from Camera: op=State serial=211435 05:46:59 GetSingleValue result=40 Value=cccccccc 05:46:59 SkyScan query 05:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:47:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:00 Parameters OK 05:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:00 Set A/D data flow result=40 05:47:00 Set A/D channel type result=40 05:47:00 Set A/D encoding result=40 05:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:00 Set channel filter=0.000000e+000 result=40 05:47:00 Config A/D Result=40 05:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:00 Get A/D filter: -9.255963e+061 result=40 05:47:00 Get A/D value=-858993460 result=40 05:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:00 Parameters OK 05:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:00 Set A/D data flow result=40 05:47:00 Set A/D channel type result=40 05:47:00 Set A/D encoding result=40 05:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:00 Set channel filter=0.000000e+000 result=40 05:47:00 Config A/D Result=40 05:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:00 Get A/D filter: -9.255963e+061 result=40 05:47:00 Get A/D value=-858993460 result=40 05:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:00 Aux= 05:47:00 Message to Camera, serial 211435 queued 05:47:08 Received message from Master: op=Shutter serial=211445 05:47:08 Shutter LASER close 05:47:09 Received message from Master: op=PointingHead serial=211449 05:47:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:47:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:47:09 Point started: ret=0 05:47:09 point_skyscan result=0 05:47:10 Check angles 05:47:10 SkyScan query 05:47:10 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.205<-21547 Statuses=0009 0009 05:47:10 Msec=0 True Az=136.14 Ze=-143.205 Az status=0009 Ze status=0009 05:47:11 Check angles 05:47:11 SkyScan query 05:47:11 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.25<-20150 Statuses=0009 0009 05:47:11 Msec=750 True Az=153.525 Ze=-122.25 Az status=0009 Ze status=0009 05:47:11 Check angles 05:47:11 SkyScan query 05:47:12 SkyScan query done: ret=0 az=171.03<-11402 ze=-101.385<-18759 Statuses=0009 0009 05:47:12 Msec=1500 True Az=171.03 Ze=-101.385 Az status=0009 Ze status=0009 05:47:12 Check angles 05:47:12 SkyScan query 05:47:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.37<-17358 Statuses=0008 0009 05:47:13 Msec=2250 True Az=175.995 Ze=-80.37 Az status=0008 Ze status=0009 05:47:13 Check angles 05:47:13 SkyScan query 05:47:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.415<-15961 Statuses=0008 0009 05:47:13 Msec=3000 True Az=175.995 Ze=-59.415 Az status=0008 Ze status=0009 05:47:14 Check angles 05:47:14 SkyScan query 05:47:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:47:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:47:14 Message to Master queued w/err=0: serial=211449 error=0 05:47:19 Received message from Master: op=Filter serial=211450 05:47:19 Color wheel filter change from 0 to 0 05:47:19 FLIGetFilterPos err=0 currentPosition=0 05:47:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:19 Filter is already there-color wheel unchanged 05:47:19 Received message from Master: op=Shutter serial=211451 05:47:19 Shutter LASER close 05:47:19 Received message from Camera: op=State serial=211453 05:47:19 GetSingleValue result=40 Value=cccccccc 05:47:19 SkyScan query 05:47:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:47:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:20 Parameters OK 05:47:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:20 Set A/D data flow result=40 05:47:20 Set A/D channel type result=40 05:47:20 Set A/D encoding result=40 05:47:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:20 Set channel filter=0.000000e+000 result=40 05:47:20 Config A/D Result=40 05:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:20 Get A/D filter: -9.255963e+061 result=40 05:47:20 Get A/D value=-858993460 result=40 05:47:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:20 Parameters OK 05:47:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:20 Set A/D data flow result=40 05:47:20 Set A/D channel type result=40 05:47:20 Set A/D encoding result=40 05:47:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:20 Set channel filter=0.000000e+000 result=40 05:47:20 Config A/D Result=40 05:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:20 Get A/D filter: -9.255963e+061 result=40 05:47:20 Get A/D value=-858993460 result=40 05:47:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:20 Aux= 05:47:20 Message to Camera, serial 211453 queued 05:47:57 Received message from Master: op=PointingHead serial=211466 05:47:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:47:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:47:57 Point started: ret=0 05:47:57 point_skyscan result=0 05:47:58 Check angles 05:47:58 SkyScan query 05:47:59 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.24<-13416 Statuses=0009 0009 05:47:59 Msec=0 True Az=152.67 Ze=-21.24 Az status=0009 Ze status=0009 05:47:59 Check angles 05:47:59 SkyScan query 05:47:59 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.285<-12019 Statuses=0009 0009 05:47:59 Msec=750 True Az=135.105 Ze=-0.285 Az status=0009 Ze status=0009 05:47:59 Check angles 05:47:59 SkyScan query 05:48:00 SkyScan query done: ret=0 az=117.585<-7839 ze=20.655<-10623 Statuses=0009 0009 05:48:00 Msec=1500 True Az=117.585 Ze=20.655 Az status=0009 Ze status=0009 05:48:00 Check angles 05:48:00 SkyScan query 05:48:01 SkyScan query done: ret=0 az=100.35<-6690 ze=41.61<-9226 Statuses=0009 0009 05:48:01 Msec=2250 True Az=100.35 Ze=41.61 Az status=0009 Ze status=0009 05:48:01 Check angles 05:48:01 SkyScan query 05:48:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.6<-8560 Statuses=0009 0008 05:48:02 Msec=3000 True Az=85.995 Ze=51.6 Az status=0009 Ze status=0008 05:48:02 Check angles 05:48:02 SkyScan query 05:48:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:48:02 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:48:02 Message to Master queued w/err=0: serial=211466 error=0 05:48:07 Received message from Master: op=Filter serial=211467 05:48:07 Color wheel filter change from 0 to 0 05:48:07 FLIGetFilterPos err=0 currentPosition=0 05:48:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:07 Filter is already there-color wheel unchanged 05:48:07 Received message from Master: op=Shutter serial=211468 05:48:07 Shutter LASER close 05:48:08 Received message from Camera: op=State serial=211470 05:48:08 GetSingleValue result=40 Value=cccccccc 05:48:08 SkyScan query 05:48:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:48:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:08 Parameters OK 05:48:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:08 Set A/D data flow result=40 05:48:08 Set A/D channel type result=40 05:48:08 Set A/D encoding result=40 05:48:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:08 Set channel filter=0.000000e+000 result=40 05:48:08 Config A/D Result=40 05:48:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:08 Get A/D filter: -9.255963e+061 result=40 05:48:08 Get A/D value=-858993460 result=40 05:48:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:08 Parameters OK 05:48:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:08 Set A/D data flow result=40 05:48:08 Set A/D channel type result=40 05:48:08 Set A/D encoding result=40 05:48:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:08 Set channel filter=0.000000e+000 result=40 05:48:08 Config A/D Result=40 05:48:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:08 Get A/D filter: -9.255963e+061 result=40 05:48:08 Get A/D value=-858993460 result=40 05:48:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:08 Aux= 05:48:08 Message to Camera, serial 211470 queued 05:48:45 Received message from Master: op=PointingHead serial=211483 05:48:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:48:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:48:45 Point started: ret=0 05:48:45 point_skyscan result=0 05:48:46 Check angles 05:48:46 SkyScan query 05:48:47 SkyScan query done: ret=0 az=85.995<-5733 ze=21.645<-10557 Statuses=0008 0009 05:48:47 Msec=0 True Az=85.995 Ze=21.645 Az status=0008 Ze status=0009 05:48:47 Check angles 05:48:47 SkyScan query 05:48:47 SkyScan query done: ret=0 az=85.995<-5733 ze=0.735<-11951 Statuses=0008 0009 05:48:47 Msec=750 True Az=85.995 Ze=0.735 Az status=0008 Ze status=0009 05:48:48 Check angles 05:48:48 SkyScan query 05:48:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.25<-13350 Statuses=0008 0009 05:48:48 Msec=1500 True Az=85.995 Ze=-20.25 Az status=0008 Ze status=0009 05:48:48 Check angles 05:48:48 SkyScan query 05:48:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.145<-14743 Statuses=0008 0009 05:48:49 Msec=2250 True Az=85.995 Ze=-41.145 Az status=0008 Ze status=0009 05:48:49 Check angles 05:48:49 SkyScan query 05:48:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:48:50 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:48:50 Message to Master queued w/err=0: serial=211483 error=0 05:48:55 Received message from Master: op=Filter serial=211484 05:48:55 Color wheel filter change from 0 to 0 05:48:55 FLIGetFilterPos err=0 currentPosition=0 05:48:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:55 Filter is already there-color wheel unchanged 05:48:55 Received message from Master: op=Shutter serial=211485 05:48:55 Shutter LASER close 05:48:55 Received message from Camera: op=State serial=211487 05:48:55 GetSingleValue result=40 Value=cccccccc 05:48:55 SkyScan query 05:48:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:48:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:56 Parameters OK 05:48:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:56 Set A/D data flow result=40 05:48:56 Set A/D channel type result=40 05:48:56 Set A/D encoding result=40 05:48:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:56 Set channel filter=0.000000e+000 result=40 05:48:56 Config A/D Result=40 05:48:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:56 Get A/D filter: -9.255963e+061 result=40 05:48:56 Get A/D value=-858993460 result=40 05:48:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:56 Parameters OK 05:48:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:56 Set A/D data flow result=40 05:48:56 Set A/D channel type result=40 05:48:56 Set A/D encoding result=40 05:48:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:56 Set channel filter=0.000000e+000 result=40 05:48:56 Config A/D Result=40 05:48:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:56 Get A/D filter: -9.255963e+061 result=40 05:48:56 Get A/D value=-858993460 result=40 05:48:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:56 Aux= 05:48:56 Message to Camera, serial 211487 queued 05:49:32 Received message from Master: op=PointingHead serial=211500 05:49:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:49:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:49:33 Point started: ret=0 05:49:33 point_skyscan result=0 05:49:33 Check angles 05:49:33 SkyScan query 05:49:34 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.405<-17427 Statuses=0009 0009 05:49:34 Msec=0 True Az=109.14 Ze=-81.405 Az status=0009 Ze status=0009 05:49:34 Check angles 05:49:34 SkyScan query 05:49:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 05:49:35 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 05:49:35 Check angles 05:49:35 SkyScan query 05:49:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 05:49:36 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 05:49:36 Check angles 05:49:36 SkyScan query 05:49:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 05:49:36 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 05:49:36 Check angles 05:49:36 SkyScan query 05:49:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.63<-23042 Statuses=0008 0009 05:49:37 Msec=3000 True Az=112.995 Ze=-165.63 Az status=0008 Ze status=0009 05:49:37 Check angles 05:49:37 SkyScan query 05:49:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:49:38 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:49:38 Message to Master queued w/err=0: serial=211500 error=0 05:49:43 Received message from Master: op=Filter serial=211501 05:49:43 Color wheel filter change from 0 to 0 05:49:43 FLIGetFilterPos err=0 currentPosition=0 05:49:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:43 Filter is already there-color wheel unchanged 05:49:43 Received message from Master: op=Shutter serial=211502 05:49:43 Shutter LASER open 05:49:43 Received message from Camera: op=State serial=211504 05:49:43 GetSingleValue result=40 Value=cccccccc 05:49:43 SkyScan query 05:49:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:49:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:44 Parameters OK 05:49:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:44 Set A/D data flow result=40 05:49:44 Set A/D channel type result=40 05:49:44 Set A/D encoding result=40 05:49:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:44 Set channel filter=0.000000e+000 result=40 05:49:44 Config A/D Result=40 05:49:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:44 Get A/D filter: -9.255963e+061 result=40 05:49:44 Get A/D value=-858993460 result=40 05:49:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:44 Parameters OK 05:49:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:44 Set A/D data flow result=40 05:49:44 Set A/D channel type result=40 05:49:44 Set A/D encoding result=40 05:49:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:44 Set channel filter=0.000000e+000 result=40 05:49:44 Config A/D Result=40 05:49:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:44 Get A/D filter: -9.255963e+061 result=40 05:49:44 Get A/D value=-858993460 result=40 05:49:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:44 Aux= 05:49:44 Message to Camera, serial 211504 queued 05:49:52 Received message from Master: op=Shutter serial=211514 05:49:52 Shutter LASER close 05:49:53 Received message from Master: op=PointingHead serial=211518 05:49:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:49:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:49:53 Point started: ret=0 05:49:53 point_skyscan result=0 05:49:54 Check angles 05:49:54 SkyScan query 05:49:54 SkyScan query done: ret=0 az=90.15<-6010 ze=157.515<-1499 Statuses=0009 0009 05:49:54 Msec=0 True Az=90.15 Ze=157.515 Az status=0009 Ze status=0009 05:49:54 Check angles 05:49:54 SkyScan query 05:49:55 SkyScan query done: ret=0 az=72.66<-4844 ze=136.56<-2896 Statuses=0009 0009 05:49:55 Msec=750 True Az=72.66 Ze=136.56 Az status=0009 Ze status=0009 05:49:55 Check angles 05:49:55 SkyScan query 05:49:56 SkyScan query done: ret=0 az=55.305<-3687 ze=115.635<-4291 Statuses=0009 0009 05:49:56 Msec=1500 True Az=55.305 Ze=115.635 Az status=0009 Ze status=0009 05:49:56 Check angles 05:49:56 SkyScan query 05:49:57 SkyScan query done: ret=0 az=41.01<-2734 ze=94.215<-5719 Statuses=0009 0009 05:49:57 Msec=2250 True Az=41.01 Ze=94.215 Az status=0009 Ze status=0009 05:49:57 Check angles 05:49:57 SkyScan query 05:49:57 SkyScan query done: ret=0 az=40.98<-2732 ze=72.78<-7148 Statuses=0008 0009 05:49:57 Msec=3000 True Az=40.98 Ze=72.78 Az status=0008 Ze status=0009 05:49:57 Check angles 05:49:57 SkyScan query 05:49:58 SkyScan query done: ret=0 az=40.98<-2732 ze=52.47<-8502 Statuses=0008 0009 05:49:58 Msec=3750 True Az=40.98 Ze=52.47 Az status=0008 Ze status=0009 05:49:58 Check angles 05:49:58 SkyScan query 05:49:59 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 05:49:59 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 05:49:59 Message to Master queued w/err=0: serial=211518 error=0 05:50:04 Received message from Master: op=Filter serial=211519 05:50:04 Color wheel filter change from 0 to 0 05:50:04 FLIGetFilterPos err=0 currentPosition=0 05:50:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:04 Filter is already there-color wheel unchanged 05:50:04 Received message from Master: op=Shutter serial=211520 05:50:04 Shutter LASER close 05:50:04 Received message from Camera: op=State serial=211522 05:50:04 GetSingleValue result=40 Value=cccccccc 05:50:04 SkyScan query 05:50:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:50:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:05 Parameters OK 05:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:05 Set A/D data flow result=40 05:50:05 Set A/D channel type result=40 05:50:05 Set A/D encoding result=40 05:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:05 Set channel filter=0.000000e+000 result=40 05:50:05 Config A/D Result=40 05:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:05 Get A/D filter: -9.255963e+061 result=40 05:50:05 Get A/D value=-858993460 result=40 05:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:05 Parameters OK 05:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:05 Set A/D data flow result=40 05:50:05 Set A/D channel type result=40 05:50:05 Set A/D encoding result=40 05:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:05 Set channel filter=0.000000e+000 result=40 05:50:05 Config A/D Result=40 05:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:05 Get A/D filter: -9.255963e+061 result=40 05:50:05 Get A/D value=-858993460 result=40 05:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:05 Aux= 05:50:05 Message to Camera, serial 211522 queued 05:50:42 Received message from Master: op=PointingHead serial=211535 05:50:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:50:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:50:42 Point started: ret=0 05:50:42 point_skyscan result=0 05:50:43 Check angles 05:50:43 SkyScan query 05:50:44 SkyScan query done: ret=0 az=64.38<-4292 ze=81.84<-6544 Statuses=0009 0009 05:50:44 Msec=0 True Az=64.38 Ze=81.84 Az status=0009 Ze status=0009 05:50:44 Check angles 05:50:44 SkyScan query 05:50:44 SkyScan query done: ret=0 az=82.44<-5496 ze=103.2<-5120 Statuses=0009 0009 05:50:44 Msec=750 True Az=82.44 Ze=103.2 Az status=0009 Ze status=0009 05:50:45 Check angles 05:50:45 SkyScan query 05:50:45 SkyScan query done: ret=0 az=99.75<-6650 ze=124.155<-3723 Statuses=0009 0009 05:50:45 Msec=1500 True Az=99.75 Ze=124.155 Az status=0009 Ze status=0009 05:50:45 Check angles 05:50:45 SkyScan query 05:50:46 SkyScan query done: ret=0 az=117.195<-7813 ze=145.11<-2326 Statuses=0009 0009 05:50:46 Msec=2250 True Az=117.195 Ze=145.11 Az status=0009 Ze status=0009 05:50:46 Check angles 05:50:46 SkyScan query 05:50:47 SkyScan query done: ret=0 az=131.07<-8738 ze=166.515<-899 Statuses=0009 0009 05:50:47 Msec=3000 True Az=131.07 Ze=166.515 Az status=0009 Ze status=0009 05:50:47 Check angles 05:50:47 SkyScan query 05:50:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-172.575<-23505 Statuses=0008 0009 05:50:47 Msec=3750 True Az=131.01 Ze=-172.575 Az status=0008 Ze status=0009 05:50:48 Check angles 05:50:48 SkyScan query 05:50:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.635<-22109 Statuses=0008 0009 05:50:48 Msec=4500 True Az=130.995 Ze=-151.635 Az status=0008 Ze status=0009 05:50:48 Check angles 05:50:48 SkyScan query 05:50:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.45<-21430 Statuses=0008 0008 05:50:49 Msec=5250 True Az=130.995 Ze=-141.45 Az status=0008 Ze status=0008 05:50:49 Message to Master queued w/err=0: serial=211535 error=0 05:50:54 Received message from Master: op=Filter serial=211536 05:50:54 Color wheel filter change from 0 to 0 05:50:54 FLIGetFilterPos err=0 currentPosition=0 05:50:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:54 Filter is already there-color wheel unchanged 05:50:54 Received message from Master: op=Shutter serial=211537 05:50:54 Shutter LASER close 05:50:54 Received message from Camera: op=State serial=211539 05:50:54 GetSingleValue result=40 Value=cccccccc 05:50:54 SkyScan query 05:50:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:50:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:55 Parameters OK 05:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:55 Set A/D data flow result=40 05:50:55 Set A/D channel type result=40 05:50:55 Set A/D encoding result=40 05:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:55 Set channel filter=0.000000e+000 result=40 05:50:55 Config A/D Result=40 05:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:55 Get A/D filter: -9.255963e+061 result=40 05:50:55 Get A/D value=-858993460 result=40 05:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:55 Parameters OK 05:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:55 Set A/D data flow result=40 05:50:55 Set A/D channel type result=40 05:50:55 Set A/D encoding result=40 05:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:55 Set channel filter=0.000000e+000 result=40 05:50:55 Config A/D Result=40 05:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:55 Get A/D filter: -9.255963e+061 result=40 05:50:55 Get A/D value=-858993460 result=40 05:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:55 Aux= 05:50:55 Message to Camera, serial 211539 queued 05:51:32 Received message from Master: op=PointingHead serial=211552 05:51:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:51:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:51:32 Point started: ret=0 05:51:32 point_skyscan result=0 05:51:33 Check angles 05:51:33 SkyScan query 05:51:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 05:51:33 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 05:51:33 Check angles 05:51:33 SkyScan query 05:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:51:34 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:51:34 Message to Master queued w/err=0: serial=211552 error=0 05:51:39 Received message from Master: op=Filter serial=211553 05:51:39 Color wheel filter change from 0 to 0 05:51:39 FLIGetFilterPos err=0 currentPosition=0 05:51:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:39 Filter is already there-color wheel unchanged 05:51:39 Received message from Master: op=Shutter serial=211554 05:51:39 Shutter LASER open 05:51:39 Received message from Camera: op=State serial=211556 05:51:39 GetSingleValue result=40 Value=cccccccc 05:51:39 SkyScan query 05:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:51:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:40 Parameters OK 05:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:40 Set A/D data flow result=40 05:51:40 Set A/D channel type result=40 05:51:40 Set A/D encoding result=40 05:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:40 Set channel filter=0.000000e+000 result=40 05:51:40 Config A/D Result=40 05:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:40 Get A/D filter: -9.255963e+061 result=40 05:51:40 Get A/D value=-858993460 result=40 05:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:40 Parameters OK 05:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:40 Set A/D data flow result=40 05:51:40 Set A/D channel type result=40 05:51:40 Set A/D encoding result=40 05:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:40 Set channel filter=0.000000e+000 result=40 05:51:40 Config A/D Result=40 05:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:40 Get A/D filter: -9.255963e+061 result=40 05:51:40 Get A/D value=-858993460 result=40 05:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:40 Aux= 05:51:40 Message to Camera, serial 211556 queued 05:51:48 Received message from Master: op=Shutter serial=211566 05:51:48 Shutter LASER close 05:51:49 Received message from Master: op=PointingHead serial=211570 05:51:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:51:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:51:49 Point started: ret=0 05:51:49 point_skyscan result=0 05:51:50 Check angles 05:51:50 SkyScan query 05:51:51 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.265<-21551 Statuses=0009 0009 05:51:51 Msec=0 True Az=135.885 Ze=-143.265 Az status=0009 Ze status=0009 05:51:51 Check angles 05:51:51 SkyScan query 05:51:51 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.86<-20124 Statuses=0009 0009 05:51:51 Msec=750 True Az=153.765 Ze=-121.86 Az status=0009 Ze status=0009 05:51:51 Check angles 05:51:51 SkyScan query 05:51:52 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.905<-18727 Statuses=0009 0009 05:51:52 Msec=1500 True Az=171.27 Ze=-100.905 Az status=0009 Ze status=0009 05:51:52 Check angles 05:51:52 SkyScan query 05:51:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 05:51:53 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 05:51:53 Check angles 05:51:53 SkyScan query 05:51:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.53<-15902 Statuses=0008 0009 05:51:54 Msec=3000 True Az=176.01 Ze=-58.53 Az status=0008 Ze status=0009 05:51:54 Check angles 05:51:54 SkyScan query 05:51:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:51:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:51:54 Message to Master queued w/err=0: serial=211570 error=0 05:51:59 Received message from Master: op=Filter serial=211571 05:51:59 Color wheel filter change from 0 to 0 05:51:59 FLIGetFilterPos err=0 currentPosition=0 05:51:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:59 Filter is already there-color wheel unchanged 05:51:59 Received message from Master: op=Shutter serial=211572 05:51:59 Shutter LASER close 05:52:00 Received message from Camera: op=State serial=211574 05:52:00 GetSingleValue result=40 Value=cccccccc 05:52:00 SkyScan query 05:52:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:52:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:00 Parameters OK 05:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:00 Set A/D data flow result=40 05:52:00 Set A/D channel type result=40 05:52:00 Set A/D encoding result=40 05:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:00 Set channel filter=0.000000e+000 result=40 05:52:00 Config A/D Result=40 05:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:00 Get A/D filter: -9.255963e+061 result=40 05:52:00 Get A/D value=-858993460 result=40 05:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:00 Parameters OK 05:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:00 Set A/D data flow result=40 05:52:00 Set A/D channel type result=40 05:52:00 Set A/D encoding result=40 05:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:00 Set channel filter=0.000000e+000 result=40 05:52:00 Config A/D Result=40 05:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:00 Get A/D filter: -9.255963e+061 result=40 05:52:00 Get A/D value=-858993460 result=40 05:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:00 Aux= 05:52:00 Message to Camera, serial 211574 queued 05:52:37 Received message from Master: op=PointingHead serial=211587 05:52:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:52:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:52:37 Point started: ret=0 05:52:37 point_skyscan result=0 05:52:38 Check angles 05:52:38 SkyScan query 05:52:39 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.735<-13449 Statuses=0009 0009 05:52:39 Msec=0 True Az=152.94 Ze=-21.735 Az status=0009 Ze status=0009 05:52:39 Check angles 05:52:39 SkyScan query 05:52:40 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.27<-12018 Statuses=0009 0009 05:52:40 Msec=750 True Az=135.105 Ze=-0.27 Az status=0009 Ze status=0009 05:52:40 Check angles 05:52:40 SkyScan query 05:52:40 SkyScan query done: ret=0 az=117.57<-7838 ze=20.67<-10622 Statuses=0009 0009 05:52:40 Msec=1500 True Az=117.57 Ze=20.67 Az status=0009 Ze status=0009 05:52:40 Check angles 05:52:40 SkyScan query 05:52:41 SkyScan query done: ret=0 az=100.245<-6683 ze=41.625<-9225 Statuses=0009 0009 05:52:41 Msec=2250 True Az=100.245 Ze=41.625 Az status=0009 Ze status=0009 05:52:41 Check angles 05:52:41 SkyScan query 05:52:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.6<-8560 Statuses=0009 0008 05:52:42 Msec=3000 True Az=85.995 Ze=51.6 Az status=0009 Ze status=0008 05:52:42 Check angles 05:52:42 SkyScan query 05:52:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:52:43 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:52:43 Message to Master queued w/err=0: serial=211587 error=0 05:52:48 Received message from Master: op=Filter serial=211588 05:52:48 Color wheel filter change from 0 to 0 05:52:48 FLIGetFilterPos err=0 currentPosition=0 05:52:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:48 Filter is already there-color wheel unchanged 05:52:48 Received message from Master: op=Shutter serial=211589 05:52:48 Shutter LASER close 05:52:48 Received message from Camera: op=State serial=211591 05:52:48 GetSingleValue result=40 Value=cccccccc 05:52:48 SkyScan query 05:52:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:52:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:48 Parameters OK 05:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:48 Set A/D data flow result=40 05:52:48 Set A/D channel type result=40 05:52:48 Set A/D encoding result=40 05:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:48 Set channel filter=0.000000e+000 result=40 05:52:48 Config A/D Result=40 05:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:48 Get A/D filter: -9.255963e+061 result=40 05:52:48 Get A/D value=-858993460 result=40 05:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:48 Parameters OK 05:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:48 Set A/D data flow result=40 05:52:48 Set A/D channel type result=40 05:52:48 Set A/D encoding result=40 05:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:48 Set channel filter=0.000000e+000 result=40 05:52:48 Config A/D Result=40 05:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:48 Get A/D filter: -9.255963e+061 result=40 05:52:48 Get A/D value=-858993460 result=40 05:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:48 Aux= 05:52:48 Message to Camera, serial 211591 queued 05:53:25 Received message from Master: op=PointingHead serial=211604 05:53:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:53:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:53:26 Point started: ret=0 05:53:26 point_skyscan result=0 05:53:26 Check angles 05:53:26 SkyScan query 05:53:27 SkyScan query done: ret=0 az=85.995<-5733 ze=21.225<-10585 Statuses=0008 0009 05:53:27 Msec=0 True Az=85.995 Ze=21.225 Az status=0008 Ze status=0009 05:53:27 Check angles 05:53:27 SkyScan query 05:53:28 SkyScan query done: ret=0 az=85.995<-5733 ze=0.255<-11983 Statuses=0008 0009 05:53:28 Msec=750 True Az=85.995 Ze=0.255 Az status=0008 Ze status=0009 05:53:28 Check angles 05:53:28 SkyScan query 05:53:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.715<-13381 Statuses=0008 0009 05:53:28 Msec=1500 True Az=85.995 Ze=-20.715 Az status=0008 Ze status=0009 05:53:29 Check angles 05:53:29 SkyScan query 05:53:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.09<-14806 Statuses=0008 0009 05:53:29 Msec=2250 True Az=85.995 Ze=-42.09 Az status=0008 Ze status=0009 05:53:29 Check angles 05:53:29 SkyScan query 05:53:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.57<-15438 Statuses=0008 0008 05:53:30 Msec=3000 True Az=85.995 Ze=-51.57 Az status=0008 Ze status=0008 05:53:30 Message to Master queued w/err=0: serial=211604 error=0 05:53:35 Received message from Master: op=Filter serial=211605 05:53:35 Color wheel filter change from 0 to 0 05:53:35 FLIGetFilterPos err=0 currentPosition=0 05:53:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:35 Filter is already there-color wheel unchanged 05:53:35 Received message from Master: op=Shutter serial=211606 05:53:35 Shutter LASER close 05:53:35 Received message from Camera: op=State serial=211608 05:53:35 GetSingleValue result=40 Value=cccccccc 05:53:35 SkyScan query 05:53:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:53:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:36 Parameters OK 05:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:36 Set A/D data flow result=40 05:53:36 Set A/D channel type result=40 05:53:36 Set A/D encoding result=40 05:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:36 Set channel filter=0.000000e+000 result=40 05:53:36 Config A/D Result=40 05:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:36 Get A/D filter: -9.255963e+061 result=40 05:53:36 Get A/D value=-858993460 result=40 05:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:36 Parameters OK 05:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:36 Set A/D data flow result=40 05:53:36 Set A/D channel type result=40 05:53:36 Set A/D encoding result=40 05:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:36 Set channel filter=0.000000e+000 result=40 05:53:36 Config A/D Result=40 05:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:36 Get A/D filter: -9.255963e+061 result=40 05:53:36 Get A/D value=-858993460 result=40 05:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:36 Aux= 05:53:36 Message to Camera, serial 211608 queued 05:54:13 Received message from Master: op=PointingHead serial=211621 05:54:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:54:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:54:13 Point started: ret=0 05:54:13 point_skyscan result=0 05:54:14 Check angles 05:54:14 SkyScan query 05:54:14 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.195<-17413 Statuses=0009 0009 05:54:14 Msec=0 True Az=108.93 Ze=-81.195 Az status=0009 Ze status=0009 05:54:14 Check angles 05:54:14 SkyScan query 05:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.15<-18810 Statuses=0008 0009 05:54:15 Msec=750 True Az=112.995 Ze=-102.15 Az status=0008 Ze status=0009 05:54:15 Check angles 05:54:15 SkyScan query 05:54:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.105<-20207 Statuses=0008 0009 05:54:16 Msec=1500 True Az=112.995 Ze=-123.105 Az status=0008 Ze status=0009 05:54:16 Check angles 05:54:16 SkyScan query 05:54:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.06<-21604 Statuses=0008 0009 05:54:16 Msec=2250 True Az=112.995 Ze=-144.06 Az status=0008 Ze status=0009 05:54:17 Check angles 05:54:17 SkyScan query 05:54:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.03<-23002 Statuses=0008 0009 05:54:17 Msec=3000 True Az=112.995 Ze=-165.03 Az status=0008 Ze status=0009 05:54:17 Check angles 05:54:17 SkyScan query 05:54:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:54:18 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:54:18 Message to Master queued w/err=0: serial=211621 error=0 05:54:23 Received message from Master: op=Filter serial=211622 05:54:23 Color wheel filter change from 0 to 0 05:54:23 FLIGetFilterPos err=0 currentPosition=0 05:54:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:23 Filter is already there-color wheel unchanged 05:54:23 Received message from Master: op=Shutter serial=211623 05:54:23 Shutter LASER open 05:54:23 Received message from Camera: op=State serial=211625 05:54:23 GetSingleValue result=40 Value=cccccccc 05:54:23 SkyScan query 05:54:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:54:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:24 Parameters OK 05:54:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:24 Set A/D data flow result=40 05:54:24 Set A/D channel type result=40 05:54:24 Set A/D encoding result=40 05:54:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:24 Set channel filter=0.000000e+000 result=40 05:54:24 Config A/D Result=40 05:54:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:24 Get A/D filter: -9.255963e+061 result=40 05:54:24 Get A/D value=-858993460 result=40 05:54:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:24 Parameters OK 05:54:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:24 Set A/D data flow result=40 05:54:24 Set A/D channel type result=40 05:54:24 Set A/D encoding result=40 05:54:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:24 Set channel filter=0.000000e+000 result=40 05:54:24 Config A/D Result=40 05:54:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:24 Get A/D filter: -9.255963e+061 result=40 05:54:24 Get A/D value=-858993460 result=40 05:54:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:24 Aux= 05:54:24 Message to Camera, serial 211625 queued 05:54:32 Received message from Master: op=Shutter serial=211635 05:54:32 Shutter LASER close 05:54:33 Received message from Master: op=PointingHead serial=211639 05:54:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:54:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:54:33 Point started: ret=0 05:54:33 point_skyscan result=0 05:54:34 Check angles 05:54:34 SkyScan query 05:54:34 SkyScan query done: ret=0 az=89.97<-5998 ze=157.305<-1513 Statuses=0009 0009 05:54:34 Msec=0 True Az=89.97 Ze=157.305 Az status=0009 Ze status=0009 05:54:35 Check angles 05:54:35 SkyScan query 05:54:35 SkyScan query done: ret=0 az=72.015<-4801 ze=135.9<-2940 Statuses=0009 0009 05:54:35 Msec=750 True Az=72.015 Ze=135.9 Az status=0009 Ze status=0009 05:54:35 Check angles 05:54:35 SkyScan query 05:54:36 SkyScan query done: ret=0 az=54.84<-3656 ze=114.96<-4336 Statuses=0009 0009 05:54:36 Msec=1500 True Az=54.84 Ze=114.96 Az status=0009 Ze status=0009 05:54:36 Check angles 05:54:36 SkyScan query 05:54:37 SkyScan query done: ret=0 az=41.01<-2734 ze=93.99<-5734 Statuses=0009 0009 05:54:37 Msec=2250 True Az=41.01 Ze=93.99 Az status=0009 Ze status=0009 05:54:37 Check angles 05:54:37 SkyScan query 05:54:38 SkyScan query done: ret=0 az=40.98<-2732 ze=73.005<-7133 Statuses=0008 0009 05:54:38 Msec=3000 True Az=40.98 Ze=73.005 Az status=0008 Ze status=0009 05:54:38 Check angles 05:54:38 SkyScan query 05:54:38 SkyScan query done: ret=0 az=40.98<-2732 ze=52.605<-8493 Statuses=0008 0009 05:54:38 Msec=3750 True Az=40.98 Ze=52.605 Az status=0008 Ze status=0009 05:54:38 Check angles [UTC 2018-12-17 05:54:38] 05:54:38 SkyScan query 05:54:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:54:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:54:39 Message to Master queued w/err=0: serial=211639 error=0 05:54:44 Received message from Master: op=Filter serial=211640 05:54:44 Color wheel filter change from 0 to 0 05:54:44 FLIGetFilterPos err=0 currentPosition=0 05:54:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:44 Filter is already there-color wheel unchanged 05:54:44 Received message from Master: op=Shutter serial=211641 05:54:44 Shutter LASER close 05:54:45 Received message from Camera: op=State serial=211643 05:54:45 GetSingleValue result=40 Value=cccccccc 05:54:45 SkyScan query 05:54:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:54:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:45 Parameters OK 05:54:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:45 Set A/D data flow result=40 05:54:45 Set A/D channel type result=40 05:54:45 Set A/D encoding result=40 05:54:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:45 Set channel filter=0.000000e+000 result=40 05:54:45 Config A/D Result=40 05:54:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:45 Get A/D filter: -9.255963e+061 result=40 05:54:45 Get A/D value=-858993460 result=40 05:54:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:45 Parameters OK 05:54:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:45 Set A/D data flow result=40 05:54:45 Set A/D channel type result=40 05:54:45 Set A/D encoding result=40 05:54:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:45 Set channel filter=0.000000e+000 result=40 05:54:45 Config A/D Result=40 05:54:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:45 Get A/D filter: -9.255963e+061 result=40 05:54:45 Get A/D value=-858993460 result=40 05:54:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:45 Aux= 05:54:45 Message to Camera, serial 211643 queued 05:55:22 Received message from Master: op=PointingHead serial=211656 05:55:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:55:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:55:23 Point started: ret=0 05:55:23 point_skyscan result=0 05:55:23 Check angles 05:55:23 SkyScan query 05:55:24 SkyScan query done: ret=0 az=64.38<-4292 ze=81.855<-6543 Statuses=0009 0009 05:55:24 Msec=0 True Az=64.38 Ze=81.855 Az status=0009 Ze status=0009 05:55:24 Check angles 05:55:24 SkyScan query 05:55:25 SkyScan query done: ret=0 az=81.9<-5460 ze=102.78<-5148 Statuses=0009 0009 05:55:25 Msec=750 True Az=81.9 Ze=102.78 Az status=0009 Ze status=0009 05:55:25 Check angles 05:55:25 SkyScan query 05:55:25 SkyScan query done: ret=0 az=99.525<-6635 ze=123.72<-3752 Statuses=0009 0009 05:55:25 Msec=1500 True Az=99.525 Ze=123.72 Az status=0009 Ze status=0009 05:55:26 Check angles 05:55:26 SkyScan query 05:55:26 SkyScan query done: ret=0 az=116.805<-7787 ze=144.66<-2356 Statuses=0009 0009 05:55:26 Msec=2250 True Az=116.805 Ze=144.66 Az status=0009 Ze status=0009 05:55:26 Check angles 05:55:26 SkyScan query 05:55:27 SkyScan query done: ret=0 az=131.055<-8737 ze=165.615<-959 Statuses=0009 0009 05:55:27 Msec=3000 True Az=131.055 Ze=165.615 Az status=0009 Ze status=0009 05:55:27 Check angles 05:55:27 SkyScan query 05:55:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.43<-23562 Statuses=0008 0009 05:55:28 Msec=3750 True Az=131.01 Ze=-173.43 Az status=0008 Ze status=0009 05:55:28 Check angles 05:55:28 SkyScan query 05:55:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.46<-22164 Statuses=0008 0009 05:55:28 Msec=4500 True Az=130.995 Ze=-152.46 Az status=0008 Ze status=0009 05:55:29 Check angles 05:55:29 SkyScan query 05:55:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 05:55:29 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 05:55:29 Message to Master queued w/err=0: serial=211656 error=0 05:55:34 Received message from Master: op=Filter serial=211657 05:55:34 Color wheel filter change from 0 to 0 05:55:34 FLIGetFilterPos err=0 currentPosition=0 05:55:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:34 Filter is already there-color wheel unchanged 05:55:34 Received message from Master: op=Shutter serial=211658 05:55:34 Shutter LASER close 05:55:34 Received message from Camera: op=State serial=211660 05:55:34 GetSingleValue result=40 Value=cccccccc 05:55:34 SkyScan query 05:55:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:55:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:35 Parameters OK 05:55:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:35 Set A/D data flow result=40 05:55:35 Set A/D channel type result=40 05:55:35 Set A/D encoding result=40 05:55:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:35 Set channel filter=0.000000e+000 result=40 05:55:35 Config A/D Result=40 05:55:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:35 Get A/D filter: -9.255963e+061 result=40 05:55:35 Get A/D value=-858993460 result=40 05:55:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:35 Parameters OK 05:55:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:35 Set A/D data flow result=40 05:55:35 Set A/D channel type result=40 05:55:35 Set A/D encoding result=40 05:55:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:35 Set channel filter=0.000000e+000 result=40 05:55:35 Config A/D Result=40 05:55:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:35 Get A/D filter: -9.255963e+061 result=40 05:55:35 Get A/D value=-858993460 result=40 05:55:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:35 Aux= 05:55:35 Message to Camera, serial 211660 queued [UTC 2018-12-17 05:55:52] 05:56:12 Received message from Master: op=PointingHead serial=211673 05:56:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:56:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:56:12 Point started: ret=0 05:56:12 point_skyscan result=0 05:56:13 Check angles 05:56:13 SkyScan query 05:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 05:56:13 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 05:56:14 Check angles 05:56:14 SkyScan query 05:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:56:14 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:56:14 Message to Master queued w/err=0: serial=211673 error=0 05:56:19 Received message from Master: op=Filter serial=211674 05:56:19 Color wheel filter change from 0 to 0 05:56:19 FLIGetFilterPos err=0 currentPosition=0 05:56:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:19 Filter is already there-color wheel unchanged 05:56:19 Received message from Master: op=Shutter serial=211675 05:56:19 Shutter LASER open 05:56:20 Received message from Camera: op=State serial=211677 05:56:20 GetSingleValue result=40 Value=cccccccc 05:56:20 SkyScan query 05:56:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:56:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:20 Parameters OK 05:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:20 Set A/D data flow result=40 05:56:20 Set A/D channel type result=40 05:56:20 Set A/D encoding result=40 05:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:20 Set channel filter=0.000000e+000 result=40 05:56:20 Config A/D Result=40 05:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:20 Get A/D filter: -9.255963e+061 result=40 05:56:20 Get A/D value=-858993460 result=40 05:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:20 Parameters OK 05:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:20 Set A/D data flow result=40 05:56:20 Set A/D channel type result=40 05:56:20 Set A/D encoding result=40 05:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:20 Set channel filter=0.000000e+000 result=40 05:56:20 Config A/D Result=40 05:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:20 Get A/D filter: -9.255963e+061 result=40 05:56:20 Get A/D value=-858993460 result=40 05:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:20 Aux= 05:56:20 Message to Camera, serial 211677 queued 05:56:29 Received message from Master: op=Shutter serial=211687 05:56:29 Shutter LASER close 05:56:29 Received message from Master: op=PointingHead serial=211691 05:56:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:56:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:56:29 Point started: ret=0 05:56:29 point_skyscan result=0 05:56:30 Check angles 05:56:30 SkyScan query 05:56:31 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.265<-21551 Statuses=0009 0009 05:56:31 Msec=0 True Az=135.885 Ze=-143.265 Az status=0009 Ze status=0009 05:56:31 Check angles 05:56:31 SkyScan query 05:56:32 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.31<-20154 Statuses=0009 0009 05:56:32 Msec=750 True Az=153.495 Ze=-122.31 Az status=0009 Ze status=0009 05:56:32 Check angles 05:56:32 SkyScan query 05:56:32 SkyScan query done: ret=0 az=170.91<-11394 ze=-101.43<-18762 Statuses=0009 0009 05:56:32 Msec=1500 True Az=170.91 Ze=-101.43 Az status=0009 Ze status=0009 05:56:32 Check angles 05:56:32 SkyScan query 05:56:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.43<-17362 Statuses=0008 0009 05:56:33 Msec=2250 True Az=175.995 Ze=-80.43 Az status=0008 Ze status=0009 05:56:33 Check angles 05:56:33 SkyScan query 05:56:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.475<-15965 Statuses=0008 0009 05:56:34 Msec=3000 True Az=175.995 Ze=-59.475 Az status=0008 Ze status=0009 05:56:34 Check angles 05:56:34 SkyScan query 05:56:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:56:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:56:35 Message to Master queued w/err=0: serial=211691 error=0 05:56:40 Received message from Master: op=Filter serial=211692 05:56:40 Color wheel filter change from 0 to 0 05:56:40 FLIGetFilterPos err=0 currentPosition=0 05:56:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:40 Filter is already there-color wheel unchanged 05:56:40 Received message from Master: op=Shutter serial=211693 05:56:40 Shutter LASER close 05:56:40 Received message from Camera: op=State serial=211695 05:56:40 GetSingleValue result=40 Value=cccccccc 05:56:40 SkyScan query 05:56:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:56:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:40 Parameters OK 05:56:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:40 Set A/D data flow result=40 05:56:40 Set A/D channel type result=40 05:56:40 Set A/D encoding result=40 05:56:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:40 Set channel filter=0.000000e+000 result=40 05:56:40 Config A/D Result=40 05:56:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:40 Get A/D filter: -9.255963e+061 result=40 05:56:40 Get A/D value=-858993460 result=40 05:56:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:40 Parameters OK 05:56:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:40 Set A/D data flow result=40 05:56:40 Set A/D channel type result=40 05:56:40 Set A/D encoding result=40 05:56:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:40 Set channel filter=0.000000e+000 result=40 05:56:40 Config A/D Result=40 05:56:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:40 Get A/D filter: -9.255963e+061 result=40 05:56:40 Get A/D value=-858993460 result=40 05:56:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:40 Aux= 05:56:40 Message to Camera, serial 211695 queued 05:57:17 Received message from Master: op=PointingHead serial=211708 05:57:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:57:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:57:18 Point started: ret=0 05:57:18 point_skyscan result=0 05:57:18 Check angles 05:57:18 SkyScan query 05:57:19 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.66<-13444 Statuses=0009 0009 05:57:19 Msec=0 True Az=152.91 Ze=-21.66 Az status=0009 Ze status=0009 05:57:19 Check angles 05:57:19 SkyScan query 05:57:20 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.21<-12014 Statuses=0009 0009 05:57:20 Msec=750 True Az=135.105 Ze=-0.21 Az status=0009 Ze status=0009 05:57:20 Check angles 05:57:20 SkyScan query 05:57:20 SkyScan query done: ret=0 az=117.585<-7839 ze=20.73<-10618 Statuses=0009 0009 05:57:20 Msec=1500 True Az=117.585 Ze=20.73 Az status=0009 Ze status=0009 05:57:21 Check angles 05:57:21 SkyScan query 05:57:21 SkyScan query done: ret=0 az=100.185<-6679 ze=41.685<-9221 Statuses=0009 0009 05:57:21 Msec=2250 True Az=100.185 Ze=41.685 Az status=0009 Ze status=0009 05:57:21 Check angles 05:57:21 SkyScan query 05:57:22 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 05:57:22 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 05:57:22 Check angles 05:57:22 SkyScan query 05:57:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 05:57:23 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 05:57:23 Message to Master queued w/err=0: serial=211708 error=0 05:57:28 Received message from Master: op=Filter serial=211709 05:57:28 Color wheel filter change from 0 to 0 05:57:28 FLIGetFilterPos err=0 currentPosition=0 05:57:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:28 Filter is already there-color wheel unchanged 05:57:28 Received message from Master: op=Shutter serial=211710 05:57:28 Shutter LASER close 05:57:28 Received message from Camera: op=State serial=211712 05:57:28 GetSingleValue result=40 Value=cccccccc 05:57:28 SkyScan query 05:57:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 05:57:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:29 Parameters OK 05:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:29 Set A/D data flow result=40 05:57:29 Set A/D channel type result=40 05:57:29 Set A/D encoding result=40 05:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:29 Set channel filter=0.000000e+000 result=40 05:57:29 Config A/D Result=40 05:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:29 Get A/D filter: -9.255963e+061 result=40 05:57:29 Get A/D value=-858993460 result=40 05:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:29 Parameters OK 05:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:29 Set A/D data flow result=40 05:57:29 Set A/D channel type result=40 05:57:29 Set A/D encoding result=40 05:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:29 Set channel filter=0.000000e+000 result=40 05:57:29 Config A/D Result=40 05:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:29 Get A/D filter: -9.255963e+061 result=40 05:57:29 Get A/D value=-858993460 result=40 05:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:29 Aux= 05:57:29 Message to Camera, serial 211712 queued 05:58:06 Received message from Master: op=PointingHead serial=211725 05:58:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:58:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:58:06 Point started: ret=0 05:58:06 point_skyscan result=0 05:58:07 Check angles 05:58:07 SkyScan query 05:58:07 SkyScan query done: ret=0 az=85.995<-5733 ze=21.225<-10585 Statuses=0008 0009 05:58:07 Msec=0 True Az=85.995 Ze=21.225 Az status=0008 Ze status=0009 05:58:07 Check angles 05:58:07 SkyScan query 05:58:08 SkyScan query done: ret=0 az=86.01<-5734 ze=0.27<-11982 Statuses=0008 0009 05:58:08 Msec=750 True Az=86.01 Ze=0.27 Az status=0008 Ze status=0009 05:58:08 Check angles 05:58:08 SkyScan query 05:58:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.67<-13378 Statuses=0008 0009 05:58:09 Msec=1500 True Az=85.995 Ze=-20.67 Az status=0008 Ze status=0009 05:58:09 Check angles 05:58:09 SkyScan query 05:58:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.61<-14774 Statuses=0008 0009 05:58:09 Msec=2250 True Az=85.995 Ze=-41.61 Az status=0008 Ze status=0009 05:58:10 Check angles 05:58:10 SkyScan query 05:58:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 05:58:10 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 05:58:10 Message to Master queued w/err=0: serial=211725 error=0 05:58:15 Received message from Master: op=Filter serial=211726 05:58:15 Color wheel filter change from 0 to 0 05:58:15 FLIGetFilterPos err=0 currentPosition=0 05:58:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:15 Filter is already there-color wheel unchanged 05:58:15 Received message from Master: op=Shutter serial=211727 05:58:15 Shutter LASER close 05:58:15 Received message from Camera: op=State serial=211729 05:58:15 GetSingleValue result=40 Value=cccccccc 05:58:15 SkyScan query 05:58:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:58:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:16 Parameters OK 05:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:16 Set A/D data flow result=40 05:58:16 Set A/D channel type result=40 05:58:16 Set A/D encoding result=40 05:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:16 Set channel filter=0.000000e+000 result=40 05:58:16 Config A/D Result=40 05:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:16 Get A/D filter: -9.255963e+061 result=40 05:58:16 Get A/D value=-858993460 result=40 05:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:16 Parameters OK 05:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:16 Set A/D data flow result=40 05:58:16 Set A/D channel type result=40 05:58:16 Set A/D encoding result=40 05:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:16 Set channel filter=0.000000e+000 result=40 05:58:16 Config A/D Result=40 05:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:16 Get A/D filter: -9.255963e+061 result=40 05:58:16 Get A/D value=-858993460 result=40 05:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:16 Aux= 05:58:16 Message to Camera, serial 211729 queued 05:58:53 Received message from Master: op=PointingHead serial=211742 05:58:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:58:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:58:53 Point started: ret=0 05:58:53 point_skyscan result=0 05:58:54 Check angles 05:58:54 SkyScan query 05:58:55 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.18<-17412 Statuses=0009 0009 05:58:55 Msec=0 True Az=108.93 Ze=-81.18 Az status=0009 Ze status=0009 05:58:55 Check angles 05:58:55 SkyScan query 05:58:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.15<-18810 Statuses=0008 0009 05:58:55 Msec=750 True Az=112.995 Ze=-102.15 Az status=0008 Ze status=0009 05:58:55 Check angles 05:58:55 SkyScan query 05:58:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.105<-20207 Statuses=0008 0009 05:58:56 Msec=1500 True Az=112.995 Ze=-123.105 Az status=0008 Ze status=0009 05:58:56 Check angles 05:58:56 SkyScan query 05:58:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.045<-21603 Statuses=0008 0009 05:58:57 Msec=2250 True Az=112.995 Ze=-144.045 Az status=0008 Ze status=0009 05:58:57 Check angles 05:58:57 SkyScan query 05:58:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.015<-23001 Statuses=0008 0009 05:58:58 Msec=3000 True Az=112.995 Ze=-165.015 Az status=0008 Ze status=0009 05:58:58 Check angles 05:58:58 SkyScan query 05:58:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 05:58:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 05:58:58 Message to Master queued w/err=0: serial=211742 error=0 05:59:03 Received message from Master: op=Filter serial=211743 05:59:03 Color wheel filter change from 0 to 0 05:59:03 FLIGetFilterPos err=0 currentPosition=0 05:59:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:03 Filter is already there-color wheel unchanged 05:59:04 Received message from Master: op=Shutter serial=211744 05:59:04 Shutter LASER open 05:59:04 Received message from Camera: op=State serial=211746 05:59:04 GetSingleValue result=40 Value=cccccccc 05:59:04 SkyScan query 05:59:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:59:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:04 Parameters OK 05:59:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:04 Set A/D data flow result=40 05:59:04 Set A/D channel type result=40 05:59:04 Set A/D encoding result=40 05:59:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:04 Set channel filter=0.000000e+000 result=40 05:59:04 Config A/D Result=40 05:59:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:04 Get A/D filter: -9.255963e+061 result=40 05:59:04 Get A/D value=-858993460 result=40 05:59:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:04 Parameters OK 05:59:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:04 Set A/D data flow result=40 05:59:04 Set A/D channel type result=40 05:59:04 Set A/D encoding result=40 05:59:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:04 Set channel filter=0.000000e+000 result=40 05:59:04 Config A/D Result=40 05:59:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:04 Get A/D filter: -9.255963e+061 result=40 05:59:04 Get A/D value=-858993460 result=40 05:59:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:04 Aux= 05:59:04 Message to Camera, serial 211746 queued 05:59:13 Received message from Master: op=Shutter serial=211756 05:59:13 Shutter LASER close 05:59:13 Received message from Master: op=PointingHead serial=211760 05:59:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:59:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:59:13 Point started: ret=0 05:59:13 point_skyscan result=0 05:59:14 Check angles 05:59:14 SkyScan query 05:59:15 SkyScan query done: ret=0 az=89.505<-5967 ze=156.72<-1552 Statuses=0009 0009 05:59:15 Msec=0 True Az=89.505 Ze=156.72 Az status=0009 Ze status=0009 05:59:15 Check angles 05:59:15 SkyScan query 05:59:16 SkyScan query done: ret=0 az=71.985<-4799 ze=135.75<-2950 Statuses=0009 0009 05:59:16 Msec=750 True Az=71.985 Ze=135.75 Az status=0009 Ze status=0009 05:59:16 Check angles 05:59:16 SkyScan query 05:59:16 SkyScan query done: ret=0 az=54.735<-3649 ze=114.78<-4348 Statuses=0009 0009 05:59:16 Msec=1500 True Az=54.735 Ze=114.78 Az status=0009 Ze status=0009 05:59:17 Check angles 05:59:17 SkyScan query 05:59:17 SkyScan query done: ret=0 az=40.98<-2732 ze=93.39<-5774 Statuses=0009 0009 05:59:17 Msec=2250 True Az=40.98 Ze=93.39 Az status=0009 Ze status=0009 05:59:17 Check angles 05:59:17 SkyScan query 05:59:18 SkyScan query done: ret=0 az=40.995<-2733 ze=72<-7200 Statuses=0008 0009 05:59:18 Msec=3000 True Az=40.995 Ze=72 Az status=0008 Ze status=0009 05:59:18 Check angles 05:59:18 SkyScan query 05:59:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.05<-8530 Statuses=0008 0009 05:59:19 Msec=3750 True Az=40.995 Ze=52.05 Az status=0008 Ze status=0009 05:59:19 Check angles 05:59:19 SkyScan query 05:59:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:59:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:59:19 Message to Master queued w/err=0: serial=211760 error=0 05:59:24 Received message from Master: op=Filter serial=211761 05:59:24 Color wheel filter change from 0 to 0 05:59:24 FLIGetFilterPos err=0 currentPosition=0 05:59:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:24 Filter is already there-color wheel unchanged 05:59:25 Received message from Master: op=Shutter serial=211762 05:59:25 Shutter LASER close 05:59:25 Received message from Camera: op=State serial=211764 05:59:25 GetSingleValue result=40 Value=cccccccc 05:59:25 SkyScan query 05:59:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:59:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:25 Parameters OK 05:59:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:25 Set A/D data flow result=40 05:59:25 Set A/D channel type result=40 05:59:25 Set A/D encoding result=40 05:59:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:25 Set channel filter=0.000000e+000 result=40 05:59:25 Config A/D Result=40 05:59:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:25 Get A/D filter: -9.255963e+061 result=40 05:59:25 Get A/D value=-858993460 result=40 05:59:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:25 Parameters OK 05:59:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:25 Set A/D data flow result=40 05:59:25 Set A/D channel type result=40 05:59:25 Set A/D encoding result=40 05:59:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:25 Set channel filter=0.000000e+000 result=40 05:59:25 Config A/D Result=40 05:59:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:25 Get A/D filter: -9.255963e+061 result=40 05:59:25 Get A/D value=-858993460 result=40 05:59:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:25 Aux= 05:59:25 Message to Camera, serial 211764 queued 06:00:02 Received message from Master: op=PointingHead serial=211777 06:00:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:00:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:00:03 Point started: ret=0 06:00:03 point_skyscan result=0 06:00:03 Check angles 06:00:03 SkyScan query 06:00:04 SkyScan query done: ret=0 az=63.825<-4255 ze=81.255<-6583 Statuses=0009 0009 06:00:04 Msec=0 True Az=63.825 Ze=81.255 Az status=0009 Ze status=0009 06:00:04 Check angles 06:00:04 SkyScan query 06:00:05 SkyScan query done: ret=0 az=81.78<-5452 ze=102.63<-5158 Statuses=0009 0009 06:00:05 Msec=750 True Az=81.78 Ze=102.63 Az status=0009 Ze status=0009 06:00:05 Check angles 06:00:05 SkyScan query 06:00:06 SkyScan query done: ret=0 az=99.165<-6611 ze=123.57<-3762 Statuses=0009 0009 06:00:06 Msec=1500 True Az=99.165 Ze=123.57 Az status=0009 Ze status=0009 06:00:06 Check angles 06:00:06 SkyScan query 06:00:06 SkyScan query done: ret=0 az=116.67<-7778 ze=144.51<-2366 Statuses=0009 0009 06:00:06 Msec=2250 True Az=116.67 Ze=144.51 Az status=0009 Ze status=0009 06:00:06 Check angles 06:00:06 SkyScan query 06:00:07 SkyScan query done: ret=0 az=131.055<-8737 ze=165.465<-969 Statuses=0009 0009 06:00:07 Msec=3000 True Az=131.055 Ze=165.465 Az status=0009 Ze status=0009 06:00:07 Check angles 06:00:07 SkyScan query 06:00:08 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.58<-23572 Statuses=0008 0009 06:00:08 Msec=3750 True Az=131.01 Ze=-173.58 Az status=0008 Ze status=0009 06:00:08 Check angles 06:00:08 SkyScan query 06:00:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.61<-22174 Statuses=0008 0009 06:00:09 Msec=4500 True Az=130.995 Ze=-152.61 Az status=0008 Ze status=0009 06:00:09 Check angles 06:00:09 SkyScan query 06:00:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:00:09 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:00:09 Message to Master queued w/err=0: serial=211777 error=0 06:00:14 Received message from Master: op=Filter serial=211778 06:00:14 Color wheel filter change from 0 to 0 06:00:14 FLIGetFilterPos err=0 currentPosition=0 06:00:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:14 Filter is already there-color wheel unchanged 06:00:14 Received message from Master: op=Shutter serial=211779 06:00:14 Shutter LASER close 06:00:15 Received message from Camera: op=State serial=211781 06:00:15 GetSingleValue result=40 Value=cccccccc 06:00:15 SkyScan query 06:00:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:00:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:15 Parameters OK 06:00:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:15 Set A/D data flow result=40 06:00:15 Set A/D channel type result=40 06:00:15 Set A/D encoding result=40 06:00:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:15 Set channel filter=0.000000e+000 result=40 06:00:15 Config A/D Result=40 06:00:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:15 Get A/D filter: -9.255963e+061 result=40 06:00:15 Get A/D value=-858993460 result=40 06:00:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:15 Parameters OK 06:00:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:15 Set A/D data flow result=40 06:00:15 Set A/D channel type result=40 06:00:15 Set A/D encoding result=40 06:00:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:15 Set channel filter=0.000000e+000 result=40 06:00:15 Config A/D Result=40 06:00:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:15 Get A/D filter: -9.255963e+061 result=40 06:00:15 Get A/D value=-858993460 result=40 06:00:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:15 Aux= 06:00:15 Message to Camera, serial 211781 queued 06:00:52 Received message from Master: op=PointingHead serial=211794 06:00:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:00:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:00:52 Point started: ret=0 06:00:52 point_skyscan result=0 06:00:53 Check angles 06:00:53 SkyScan query 06:00:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 06:00:54 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 06:00:54 Check angles 06:00:54 SkyScan query 06:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:00:54 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:00:54 Message to Master queued w/err=0: serial=211794 error=0 06:00:59 Received message from Master: op=Filter serial=211795 06:00:59 Color wheel filter change from 0 to 0 06:00:59 FLIGetFilterPos err=0 currentPosition=0 06:00:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:59 Filter is already there-color wheel unchanged 06:01:00 Received message from Master: op=Shutter serial=211796 06:01:00 Shutter LASER open 06:01:00 Received message from Camera: op=State serial=211798 06:01:00 GetSingleValue result=40 Value=cccccccc 06:01:00 SkyScan query 06:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:01:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:00 Parameters OK 06:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:00 Set A/D data flow result=40 06:01:00 Set A/D channel type result=40 06:01:00 Set A/D encoding result=40 06:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:00 Set channel filter=0.000000e+000 result=40 06:01:00 Config A/D Result=40 06:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:00 Get A/D filter: -9.255963e+061 result=40 06:01:00 Get A/D value=-858993460 result=40 06:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:00 Parameters OK 06:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:00 Set A/D data flow result=40 06:01:00 Set A/D channel type result=40 06:01:00 Set A/D encoding result=40 06:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:00 Set channel filter=0.000000e+000 result=40 06:01:00 Config A/D Result=40 06:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:00 Get A/D filter: -9.255963e+061 result=40 06:01:00 Get A/D value=-858993460 result=40 06:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:00 Aux= 06:01:00 Message to Camera, serial 211798 queued 06:01:09 Received message from Master: op=Shutter serial=211808 06:01:09 Shutter LASER close 06:01:09 Received message from Master: op=PointingHead serial=211812 06:01:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:01:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:01:10 Point started: ret=0 06:01:10 point_skyscan result=0 06:01:10 Check angles 06:01:10 SkyScan query 06:01:11 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.115<-21541 Statuses=0009 0009 06:01:11 Msec=0 True Az=136.02 Ze=-143.115 Az status=0009 Ze status=0009 06:01:11 Check angles 06:01:11 SkyScan query 06:01:12 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.175<-20145 Statuses=0009 0009 06:01:12 Msec=750 True Az=153.57 Ze=-122.175 Az status=0009 Ze status=0009 06:01:12 Check angles 06:01:12 SkyScan query 06:01:12 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.28<-18752 Statuses=0009 0009 06:01:12 Msec=1500 True Az=171.075 Ze=-101.28 Az status=0009 Ze status=0009 06:01:13 Check angles 06:01:13 SkyScan query 06:01:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.295<-17353 Statuses=0008 0009 06:01:13 Msec=2250 True Az=175.995 Ze=-80.295 Az status=0008 Ze status=0009 06:01:13 Check angles 06:01:13 SkyScan query 06:01:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.34<-15956 Statuses=0008 0009 06:01:14 Msec=3000 True Az=175.995 Ze=-59.34 Az status=0008 Ze status=0009 06:01:14 Check angles 06:01:14 SkyScan query 06:01:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:01:15 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:01:15 Message to Master queued w/err=0: serial=211812 error=0 06:01:20 Received message from Master: op=Filter serial=211813 06:01:20 Color wheel filter change from 0 to 0 06:01:20 FLIGetFilterPos err=0 currentPosition=0 06:01:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:20 Filter is already there-color wheel unchanged 06:01:20 Received message from Master: op=Shutter serial=211814 06:01:20 Shutter LASER close 06:01:20 Received message from Camera: op=State serial=211816 06:01:20 GetSingleValue result=40 Value=cccccccc 06:01:20 SkyScan query 06:01:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:01:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:21 Parameters OK 06:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:21 Set A/D data flow result=40 06:01:21 Set A/D channel type result=40 06:01:21 Set A/D encoding result=40 06:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:21 Set channel filter=0.000000e+000 result=40 06:01:21 Config A/D Result=40 06:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:21 Get A/D filter: -9.255963e+061 result=40 06:01:21 Get A/D value=-858993460 result=40 06:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:21 Parameters OK 06:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:21 Set A/D data flow result=40 06:01:21 Set A/D channel type result=40 06:01:21 Set A/D encoding result=40 06:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:21 Set channel filter=0.000000e+000 result=40 06:01:21 Config A/D Result=40 06:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:21 Get A/D filter: -9.255963e+061 result=40 06:01:21 Get A/D value=-858993460 result=40 06:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:21 Aux= 06:01:21 Message to Camera, serial 211816 queued 06:01:57 Received message from Master: op=PointingHead serial=211829 06:01:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:01:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:01:58 Point started: ret=0 06:01:58 point_skyscan result=0 06:01:59 Check angles 06:01:59 SkyScan query 06:01:59 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.57<-13438 Statuses=0009 0009 06:01:59 Msec=0 True Az=152.775 Ze=-21.57 Az status=0009 Ze status=0009 06:01:59 Check angles 06:01:59 SkyScan query 06:02:00 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.555<-12037 Statuses=0009 0009 06:02:00 Msec=750 True Az=135.375 Ze=-0.555 Az status=0009 Ze status=0009 06:02:00 Check angles 06:02:00 SkyScan query 06:02:01 SkyScan query done: ret=0 az=117.495<-7833 ze=20.82<-10612 Statuses=0009 0009 06:02:01 Msec=1500 True Az=117.495 Ze=20.82 Az status=0009 Ze status=0009 06:02:01 Check angles 06:02:01 SkyScan query 06:02:01 SkyScan query done: ret=0 az=100.125<-6675 ze=41.76<-9216 Statuses=0009 0009 06:02:01 Msec=2250 True Az=100.125 Ze=41.76 Az status=0009 Ze status=0009 06:02:02 Check angles 06:02:02 SkyScan query 06:02:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.585<-8561 Statuses=0009 0008 06:02:02 Msec=3000 True Az=85.995 Ze=51.585 Az status=0009 Ze status=0008 06:02:02 Check angles 06:02:02 SkyScan query 06:02:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:02:03 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:02:03 Message to Master queued w/err=0: serial=211829 error=0 06:02:08 Received message from Master: op=Filter serial=211830 06:02:08 Color wheel filter change from 0 to 0 06:02:08 FLIGetFilterPos err=0 currentPosition=0 06:02:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:08 Filter is already there-color wheel unchanged 06:02:08 Received message from Master: op=Shutter serial=211831 06:02:08 Shutter LASER close 06:02:08 Received message from Camera: op=State serial=211833 06:02:08 GetSingleValue result=40 Value=cccccccc 06:02:08 SkyScan query 06:02:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:02:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:09 Parameters OK 06:02:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:09 Set A/D data flow result=40 06:02:09 Set A/D channel type result=40 06:02:09 Set A/D encoding result=40 06:02:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:09 Set channel filter=0.000000e+000 result=40 06:02:09 Config A/D Result=40 06:02:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:09 Get A/D filter: -9.255963e+061 result=40 06:02:09 Get A/D value=-858993460 result=40 06:02:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:09 Parameters OK 06:02:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:09 Set A/D data flow result=40 06:02:09 Set A/D channel type result=40 06:02:09 Set A/D encoding result=40 06:02:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:09 Set channel filter=0.000000e+000 result=40 06:02:09 Config A/D Result=40 06:02:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:09 Get A/D filter: -9.255963e+061 result=40 06:02:09 Get A/D value=-858993460 result=40 06:02:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:09 Aux= 06:02:09 Message to Camera, serial 211833 queued 06:02:46 Received message from Master: op=PointingHead serial=211846 06:02:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:02:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:02:46 Point started: ret=0 06:02:46 point_skyscan result=0 06:02:47 Check angles 06:02:47 SkyScan query 06:02:47 SkyScan query done: ret=0 az=85.995<-5733 ze=21.69<-10554 Statuses=0008 0009 06:02:47 Msec=0 True Az=85.995 Ze=21.69 Az status=0008 Ze status=0009 06:02:48 Check angles 06:02:48 SkyScan query 06:02:48 SkyScan query done: ret=0 az=85.995<-5733 ze=0.75<-11950 Statuses=0008 0009 06:02:48 Msec=750 True Az=85.995 Ze=0.75 Az status=0008 Ze status=0009 06:02:48 Check angles 06:02:48 SkyScan query 06:02:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.22<-13348 Statuses=0008 0009 06:02:49 Msec=1500 True Az=85.995 Ze=-20.22 Az status=0008 Ze status=0009 06:02:49 Check angles 06:02:49 SkyScan query 06:02:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.115<-14741 Statuses=0008 0009 06:02:50 Msec=2250 True Az=85.995 Ze=-41.115 Az status=0008 Ze status=0009 06:02:50 Check angles 06:02:50 SkyScan query 06:02:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:02:50 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:02:50 Message to Master queued w/err=0: serial=211846 error=0 06:02:55 Received message from Master: op=Filter serial=211847 06:02:55 Color wheel filter change from 0 to 0 06:02:55 FLIGetFilterPos err=0 currentPosition=0 06:02:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:55 Filter is already there-color wheel unchanged 06:02:56 Received message from Master: op=Shutter serial=211848 06:02:56 Shutter LASER close 06:02:56 Received message from Camera: op=State serial=211850 06:02:56 GetSingleValue result=40 Value=cccccccc 06:02:56 SkyScan query 06:02:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:02:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:56 Parameters OK 06:02:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:56 Set A/D data flow result=40 06:02:56 Set A/D channel type result=40 06:02:56 Set A/D encoding result=40 06:02:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:56 Set channel filter=0.000000e+000 result=40 06:02:56 Config A/D Result=40 06:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:56 Get A/D filter: -9.255963e+061 result=40 06:02:56 Get A/D value=-858993460 result=40 06:02:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:56 Parameters OK 06:02:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:56 Set A/D data flow result=40 06:02:56 Set A/D channel type result=40 06:02:56 Set A/D encoding result=40 06:02:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:56 Set channel filter=0.000000e+000 result=40 06:02:56 Config A/D Result=40 06:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:56 Get A/D filter: -9.255963e+061 result=40 06:02:56 Get A/D value=-858993460 result=40 06:02:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:56 Aux= 06:02:56 Message to Camera, serial 211850 queued 06:03:33 Received message from Master: op=PointingHead serial=211863 06:03:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:03:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:03:33 Point started: ret=0 06:03:33 point_skyscan result=0 06:03:34 Check angles 06:03:34 SkyScan query 06:03:35 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.075<-17405 Statuses=0009 0009 06:03:35 Msec=0 True Az=108.84 Ze=-81.075 Az status=0009 Ze status=0009 06:03:35 Check angles 06:03:35 SkyScan query 06:03:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 06:03:36 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 06:03:36 Check angles 06:03:36 SkyScan query 06:03:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.985<-20199 Statuses=0008 0009 06:03:36 Msec=1500 True Az=112.995 Ze=-122.985 Az status=0008 Ze status=0009 06:03:36 Check angles 06:03:36 SkyScan query 06:03:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.94<-21596 Statuses=0008 0009 06:03:37 Msec=2250 True Az=112.995 Ze=-143.94 Az status=0008 Ze status=0009 06:03:37 Check angles 06:03:37 SkyScan query 06:03:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.925<-22995 Statuses=0008 0009 06:03:38 Msec=3000 True Az=112.995 Ze=-164.925 Az status=0008 Ze status=0009 06:03:38 Check angles 06:03:38 SkyScan query 06:03:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 06:03:39 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 06:03:39 Message to Master queued w/err=0: serial=211863 error=0 06:03:44 Received message from Master: op=Filter serial=211864 06:03:44 Color wheel filter change from 0 to 0 06:03:44 FLIGetFilterPos err=0 currentPosition=0 06:03:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:44 Filter is already there-color wheel unchanged 06:03:44 Received message from Master: op=Shutter serial=211865 06:03:44 Shutter LASER open 06:03:44 Received message from Camera: op=State serial=211867 06:03:44 GetSingleValue result=40 Value=cccccccc 06:03:44 SkyScan query 06:03:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:03:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:44 Parameters OK 06:03:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:44 Set A/D data flow result=40 06:03:44 Set A/D channel type result=40 06:03:44 Set A/D encoding result=40 06:03:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:44 Set channel filter=0.000000e+000 result=40 06:03:44 Config A/D Result=40 06:03:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:44 Get A/D filter: -9.255963e+061 result=40 06:03:44 Get A/D value=-858993460 result=40 06:03:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:44 Parameters OK 06:03:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:44 Set A/D data flow result=40 06:03:44 Set A/D channel type result=40 06:03:44 Set A/D encoding result=40 06:03:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:44 Set channel filter=0.000000e+000 result=40 06:03:44 Config A/D Result=40 06:03:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:44 Get A/D filter: -9.255963e+061 result=40 06:03:44 Get A/D value=-858993460 result=40 06:03:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:44 Aux= 06:03:44 Message to Camera, serial 211867 queued 06:03:53 Received message from Master: op=Shutter serial=211877 06:03:53 Shutter LASER close 06:03:53 Received message from Master: op=PointingHead serial=211881 06:03:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:03:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:03:54 Point started: ret=0 06:03:54 point_skyscan result=0 06:03:54 Check angles 06:03:54 SkyScan query 06:03:55 SkyScan query done: ret=0 az=89.565<-5971 ze=156.84<-1544 Statuses=0009 0009 06:03:55 Msec=0 True Az=89.565 Ze=156.84 Az status=0009 Ze status=0009 06:03:55 Check angles 06:03:55 SkyScan query 06:03:56 SkyScan query done: ret=0 az=72.045<-4803 ze=135.885<-2941 Statuses=0009 0009 06:03:56 Msec=750 True Az=72.045 Ze=135.885 Az status=0009 Ze status=0009 06:03:56 Check angles 06:03:56 SkyScan query 06:03:56 SkyScan query done: ret=0 az=54.75<-3650 ze=114.93<-4338 Statuses=0009 0009 06:03:56 Msec=1500 True Az=54.75 Ze=114.93 Az status=0009 Ze status=0009 06:03:57 Check angles 06:03:57 SkyScan query 06:03:57 SkyScan query done: ret=0 az=40.92<-2728 ze=93.96<-5736 Statuses=0009 0009 06:03:57 Msec=2250 True Az=40.92 Ze=93.96 Az status=0009 Ze status=0009 06:03:57 Check angles 06:03:57 SkyScan query 06:03:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.99<-7134 Statuses=0008 0009 06:03:58 Msec=3000 True Az=40.995 Ze=72.99 Az status=0008 Ze status=0009 06:03:58 Check angles 06:03:58 SkyScan query 06:03:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 06:03:59 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 06:03:59 Check angles 06:03:59 SkyScan query 06:03:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:03:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:03:59 Message to Master queued w/err=0: serial=211881 error=0 06:04:04 Received message from Master: op=Filter serial=211882 06:04:04 Color wheel filter change from 0 to 0 06:04:04 FLIGetFilterPos err=0 currentPosition=0 06:04:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:04 Filter is already there-color wheel unchanged 06:04:05 Received message from Master: op=Shutter serial=211883 06:04:05 Shutter LASER close 06:04:05 Received message from Camera: op=State serial=211885 06:04:05 GetSingleValue result=40 Value=cccccccc 06:04:05 SkyScan query 06:04:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:04:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:05 Parameters OK 06:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:05 Set A/D data flow result=40 06:04:05 Set A/D channel type result=40 06:04:05 Set A/D encoding result=40 06:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:05 Set channel filter=0.000000e+000 result=40 06:04:05 Config A/D Result=40 06:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:05 Get A/D filter: -9.255963e+061 result=40 06:04:05 Get A/D value=-858993460 result=40 06:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:05 Parameters OK 06:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:05 Set A/D data flow result=40 06:04:05 Set A/D channel type result=40 06:04:05 Set A/D encoding result=40 06:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:05 Set channel filter=0.000000e+000 result=40 06:04:05 Config A/D Result=40 06:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:05 Get A/D filter: -9.255963e+061 result=40 06:04:05 Get A/D value=-858993460 result=40 06:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:05 Aux= 06:04:05 Message to Camera, serial 211885 queued 06:04:42 Received message from Master: op=PointingHead serial=211898 06:04:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:04:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:04:43 Point started: ret=0 06:04:43 point_skyscan result=0 06:04:44 Check angles 06:04:44 SkyScan query 06:04:44 SkyScan query done: ret=0 az=64.155<-4277 ze=81.585<-6561 Statuses=0009 0009 06:04:44 Msec=0 True Az=64.155 Ze=81.585 Az status=0009 Ze status=0009 06:04:44 Check angles 06:04:44 SkyScan query 06:04:45 SkyScan query done: ret=0 az=81.585<-5439 ze=102.51<-5166 Statuses=0009 0009 06:04:45 Msec=750 True Az=81.585 Ze=102.51 Az status=0009 Ze status=0009 06:04:45 Check angles 06:04:45 SkyScan query 06:04:46 SkyScan query done: ret=0 az=99.105<-6607 ze=123.45<-3770 Statuses=0009 0009 06:04:46 Msec=1500 True Az=99.105 Ze=123.45 Az status=0009 Ze status=0009 06:04:46 Check angles 06:04:46 SkyScan query 06:04:46 SkyScan query done: ret=0 az=116.58<-7772 ze=144.405<-2373 Statuses=0009 0009 06:04:46 Msec=2250 True Az=116.58 Ze=144.405 Az status=0009 Ze status=0009 06:04:47 Check angles 06:04:47 SkyScan query 06:04:47 SkyScan query done: ret=0 az=131.07<-8738 ze=165.81<-946 Statuses=0009 0009 06:04:47 Msec=3000 True Az=131.07 Ze=165.81 Az status=0009 Ze status=0009 06:04:47 Check angles 06:04:47 SkyScan query 06:04:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.235<-23549 Statuses=0008 0009 06:04:48 Msec=3750 True Az=131.01 Ze=-173.235 Az status=0008 Ze status=0009 06:04:48 Check angles 06:04:48 SkyScan query 06:04:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.28<-22152 Statuses=0008 0009 06:04:49 Msec=4500 True Az=130.995 Ze=-152.28 Az status=0008 Ze status=0009 06:04:49 Check angles 06:04:49 SkyScan query 06:04:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:04:49 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:04:49 Message to Master queued w/err=0: serial=211898 error=0 06:04:54 Received message from Master: op=Filter serial=211899 06:04:54 Color wheel filter change from 0 to 0 06:04:54 FLIGetFilterPos err=0 currentPosition=0 06:04:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:54 Filter is already there-color wheel unchanged 06:04:55 Received message from Master: op=Shutter serial=211900 06:04:55 Shutter LASER close 06:04:55 Received message from Camera: op=State serial=211902 06:04:55 GetSingleValue result=40 Value=cccccccc 06:04:55 SkyScan query 06:04:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:04:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:55 Parameters OK 06:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:55 Set A/D data flow result=40 06:04:55 Set A/D channel type result=40 06:04:55 Set A/D encoding result=40 06:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:55 Set channel filter=0.000000e+000 result=40 06:04:55 Config A/D Result=40 06:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:55 Get A/D filter: -9.255963e+061 result=40 06:04:55 Get A/D value=-858993460 result=40 06:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:55 Parameters OK 06:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:55 Set A/D data flow result=40 06:04:55 Set A/D channel type result=40 06:04:55 Set A/D encoding result=40 06:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:55 Set channel filter=0.000000e+000 result=40 06:04:55 Config A/D Result=40 06:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:55 Get A/D filter: -9.255963e+061 result=40 06:04:55 Get A/D value=-858993460 result=40 06:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:55 Aux= 06:04:55 Message to Camera, serial 211902 queued 06:05:32 Received message from Master: op=PointingHead serial=211915 06:05:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:05:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:05:32 Point started: ret=0 06:05:32 point_skyscan result=0 06:05:33 Check angles 06:05:33 SkyScan query 06:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0009 0009 06:05:34 Msec=0 True Az=112.995 Ze=-171.165 Az status=0009 Ze status=0009 06:05:34 Check angles 06:05:34 SkyScan query 06:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:05:34 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 [UTC 2018-12-17 06:05:34] 06:05:34 Message to Master queued w/err=0: serial=211915 error=0 06:05:39 Received message from Master: op=Filter serial=211916 06:05:39 Color wheel filter change from 0 to 0 06:05:39 FLIGetFilterPos err=0 currentPosition=0 06:05:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:39 Filter is already there-color wheel unchanged 06:05:40 Received message from Master: op=Shutter serial=211917 06:05:40 Shutter LASER open 06:05:40 Received message from Camera: op=State serial=211919 06:05:40 GetSingleValue result=40 Value=cccccccc 06:05:40 SkyScan query 06:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:05:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:40 Parameters OK 06:05:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:40 Set A/D data flow result=40 06:05:40 Set A/D channel type result=40 06:05:40 Set A/D encoding result=40 06:05:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:40 Set channel filter=0.000000e+000 result=40 06:05:40 Config A/D Result=40 06:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:40 Get A/D filter: -9.255963e+061 result=40 06:05:40 Get A/D value=-858993460 result=40 06:05:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:40 Parameters OK 06:05:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:40 Set A/D data flow result=40 06:05:40 Set A/D channel type result=40 06:05:40 Set A/D encoding result=40 06:05:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:40 Set channel filter=0.000000e+000 result=40 06:05:40 Config A/D Result=40 06:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:40 Get A/D filter: -9.255963e+061 result=40 06:05:40 Get A/D value=-858993460 result=40 06:05:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:40 Aux= 06:05:40 Message to Camera, serial 211919 queued 06:05:49 Received message from Master: op=Shutter serial=211929 06:05:49 Shutter LASER close 06:05:49 Received message from Master: op=PointingHead serial=211933 06:05:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:05:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:05:50 Point started: ret=0 06:05:50 point_skyscan result=0 06:05:50 Check angles 06:05:50 SkyScan query 06:05:51 SkyScan query done: ret=0 az=136.425<-9095 ze=-142.725<-21515 Statuses=0009 0009 06:05:51 Msec=0 True Az=136.425 Ze=-142.725 Az status=0009 Ze status=0009 06:05:51 Check angles 06:05:51 SkyScan query 06:05:52 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.74<-20116 Statuses=0009 0009 06:05:52 Msec=750 True Az=153.96 Ze=-121.74 Az status=0009 Ze status=0009 06:05:52 Check angles 06:05:52 SkyScan query 06:05:53 SkyScan query done: ret=0 az=171.87<-11458 ze=-100.275<-18685 Statuses=0009 0009 06:05:53 Msec=1500 True Az=171.87 Ze=-100.275 Az status=0009 Ze status=0009 06:05:53 Check angles 06:05:53 SkyScan query 06:05:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-78.99<-17266 Statuses=0008 0009 06:05:53 Msec=2250 True Az=175.995 Ze=-78.99 Az status=0008 Ze status=0009 06:05:54 Check angles 06:05:54 SkyScan query 06:05:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-57.645<-15843 Statuses=0008 0009 06:05:54 Msec=3000 True Az=175.995 Ze=-57.645 Az status=0008 Ze status=0009 06:05:54 Check angles 06:05:54 SkyScan query 06:05:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 06:05:55 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 06:05:55 Message to Master queued w/err=0: serial=211933 error=0 06:06:00 Received message from Master: op=Filter serial=211934 06:06:00 Color wheel filter change from 0 to 0 06:06:00 FLIGetFilterPos err=0 currentPosition=0 06:06:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:00 Filter is already there-color wheel unchanged 06:06:00 Received message from Master: op=Shutter serial=211935 06:06:00 Shutter LASER close 06:06:00 Received message from Camera: op=State serial=211937 06:06:00 GetSingleValue result=40 Value=cccccccc 06:06:00 SkyScan query 06:06:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:06:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:01 Parameters OK 06:06:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:01 Set A/D data flow result=40 06:06:01 Set A/D channel type result=40 06:06:01 Set A/D encoding result=40 06:06:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:01 Set channel filter=0.000000e+000 result=40 06:06:01 Config A/D Result=40 06:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:01 Get A/D filter: -9.255963e+061 result=40 06:06:01 Get A/D value=-858993460 result=40 06:06:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:01 Parameters OK 06:06:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:01 Set A/D data flow result=40 06:06:01 Set A/D channel type result=40 06:06:01 Set A/D encoding result=40 06:06:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:01 Set channel filter=0.000000e+000 result=40 06:06:01 Config A/D Result=40 06:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:01 Get A/D filter: -9.255963e+061 result=40 06:06:01 Get A/D value=-858993460 result=40 06:06:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:01 Aux= 06:06:01 Message to Camera, serial 211937 queued 06:06:38 Received message from Master: op=PointingHead serial=211950 06:06:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:06:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:06:38 Point started: ret=0 06:06:38 point_skyscan result=0 06:06:39 Check angles 06:06:39 SkyScan query 06:06:39 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.555<-13437 Statuses=0009 0009 06:06:39 Msec=0 True Az=152.775 Ze=-21.555 Az status=0009 Ze status=0009 06:06:39 Check angles 06:06:39 SkyScan query 06:06:40 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.525<-12035 Statuses=0009 0009 06:06:40 Msec=750 True Az=135.3 Ze=-0.525 Az status=0009 Ze status=0009 06:06:40 Check angles 06:06:40 SkyScan query 06:06:41 SkyScan query done: ret=0 az=117.75<-7850 ze=20.355<-10643 Statuses=0009 0009 06:06:41 Msec=1500 True Az=117.75 Ze=20.355 Az status=0009 Ze status=0009 06:06:41 Check angles 06:06:41 SkyScan query 06:06:42 SkyScan query done: ret=0 az=100.02<-6668 ze=41.775<-9215 Statuses=0009 0009 06:06:42 Msec=2250 True Az=100.02 Ze=41.775 Az status=0009 Ze status=0009 06:06:42 Check angles 06:06:42 SkyScan query 06:06:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.585<-8561 Statuses=0009 0008 06:06:42 Msec=3000 True Az=85.995 Ze=51.585 Az status=0009 Ze status=0008 06:06:42 Check angles 06:06:42 SkyScan query 06:06:43 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 06:06:43 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 06:06:43 Message to Master queued w/err=0: serial=211950 error=0 06:06:48 Received message from Master: op=Filter serial=211951 06:06:48 Color wheel filter change from 0 to 0 06:06:48 FLIGetFilterPos err=0 currentPosition=0 06:06:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:48 Filter is already there-color wheel unchanged 06:06:48 Received message from Master: op=Shutter serial=211952 06:06:48 Shutter LASER close 06:06:48 Received message from Camera: op=State serial=211954 06:06:48 GetSingleValue result=40 Value=cccccccc 06:06:48 SkyScan query 06:06:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:06:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:49 Parameters OK 06:06:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:49 Set A/D data flow result=40 06:06:49 Set A/D channel type result=40 06:06:49 Set A/D encoding result=40 06:06:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:49 Set channel filter=0.000000e+000 result=40 06:06:49 Config A/D Result=40 06:06:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:49 Get A/D filter: -9.255963e+061 result=40 06:06:49 Get A/D value=-858993460 result=40 06:06:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:49 Parameters OK 06:06:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:49 Set A/D data flow result=40 06:06:49 Set A/D channel type result=40 06:06:49 Set A/D encoding result=40 06:06:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:49 Set channel filter=0.000000e+000 result=40 06:06:49 Config A/D Result=40 06:06:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:49 Get A/D filter: -9.255963e+061 result=40 06:06:49 Get A/D value=-858993460 result=40 06:06:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:49 Aux= 06:06:49 Message to Camera, serial 211954 queued 06:07:26 Received message from Master: op=PointingHead serial=211967 06:07:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:07:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:07:26 Point started: ret=0 06:07:26 point_skyscan result=0 06:07:27 Check angles 06:07:27 SkyScan query 06:07:28 SkyScan query done: ret=0 az=85.995<-5733 ze=21.57<-10562 Statuses=0008 0009 06:07:28 Msec=0 True Az=85.995 Ze=21.57 Az status=0008 Ze status=0009 06:07:28 Check angles 06:07:28 SkyScan query 06:07:28 SkyScan query done: ret=0 az=85.995<-5733 ze=0.675<-11955 Statuses=0008 0009 06:07:28 Msec=750 True Az=85.995 Ze=0.675 Az status=0008 Ze status=0009 06:07:29 Check angles 06:07:29 SkyScan query 06:07:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.76<-13384 Statuses=0008 0009 06:07:29 Msec=1500 True Az=85.995 Ze=-20.76 Az status=0008 Ze status=0009 06:07:29 Check angles 06:07:29 SkyScan query 06:07:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.7<-14780 Statuses=0008 0009 06:07:30 Msec=2250 True Az=85.995 Ze=-41.7 Az status=0008 Ze status=0009 06:07:30 Check angles 06:07:30 SkyScan query 06:07:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:07:31 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:07:31 Message to Master queued w/err=0: serial=211967 error=0 06:07:36 Received message from Master: op=Filter serial=211968 06:07:36 Color wheel filter change from 0 to 0 06:07:36 FLIGetFilterPos err=0 currentPosition=0 06:07:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:36 Filter is already there-color wheel unchanged 06:07:36 Received message from Master: op=Shutter serial=211969 06:07:36 Shutter LASER close 06:07:36 Received message from Camera: op=State serial=211971 06:07:36 GetSingleValue result=40 Value=cccccccc 06:07:36 SkyScan query 06:07:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:07:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:36 Parameters OK 06:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:36 Set A/D data flow result=40 06:07:36 Set A/D channel type result=40 06:07:36 Set A/D encoding result=40 06:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:36 Set channel filter=0.000000e+000 result=40 06:07:36 Config A/D Result=40 06:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:36 Get A/D filter: -9.255963e+061 result=40 06:07:36 Get A/D value=-858993460 result=40 06:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:36 Parameters OK 06:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:36 Set A/D data flow result=40 06:07:36 Set A/D channel type result=40 06:07:36 Set A/D encoding result=40 06:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:36 Set channel filter=0.000000e+000 result=40 06:07:36 Config A/D Result=40 06:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:36 Get A/D filter: -9.255963e+061 result=40 06:07:36 Get A/D value=-858993460 result=40 06:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:36 Aux= 06:07:36 Message to Camera, serial 211971 queued 06:08:13 Received message from Master: op=PointingHead serial=211984 06:08:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:08:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:08:14 Point started: ret=0 06:08:14 point_skyscan result=0 06:08:14 Check angles 06:08:14 SkyScan query 06:08:15 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.27<-17418 Statuses=0009 0009 06:08:15 Msec=0 True Az=108.945 Ze=-81.27 Az status=0009 Ze status=0009 06:08:15 Check angles 06:08:15 SkyScan query 06:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 06:08:16 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 06:08:16 Check angles 06:08:16 SkyScan query 06:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 06:08:16 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 06:08:17 Check angles 06:08:17 SkyScan query 06:08:17 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.525<-21635 Statuses=0008 0009 06:08:17 Msec=2250 True Az=112.98 Ze=-144.525 Az status=0008 Ze status=0009 06:08:17 Check angles 06:08:17 SkyScan query 06:08:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.9<-23060 Statuses=0008 0009 06:08:18 Msec=3000 True Az=112.995 Ze=-165.9 Az status=0008 Ze status=0009 06:08:18 Check angles 06:08:18 SkyScan query 06:08:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:08:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:08:19 Message to Master queued w/err=0: serial=211984 error=0 06:08:24 Received message from Master: op=Filter serial=211985 06:08:24 Color wheel filter change from 0 to 0 06:08:24 FLIGetFilterPos err=0 currentPosition=0 06:08:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:24 Filter is already there-color wheel unchanged 06:08:24 Received message from Master: op=Shutter serial=211986 06:08:24 Shutter LASER open 06:08:24 Received message from Camera: op=State serial=211988 06:08:24 GetSingleValue result=40 Value=cccccccc 06:08:24 SkyScan query 06:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:08:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:25 Parameters OK 06:08:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:25 Set A/D data flow result=40 06:08:25 Set A/D channel type result=40 06:08:25 Set A/D encoding result=40 06:08:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:25 Set channel filter=0.000000e+000 result=40 06:08:25 Config A/D Result=40 06:08:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:25 Get A/D filter: -9.255963e+061 result=40 06:08:25 Get A/D value=-858993460 result=40 06:08:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:25 Parameters OK 06:08:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:25 Set A/D data flow result=40 06:08:25 Set A/D channel type result=40 06:08:25 Set A/D encoding result=40 06:08:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:25 Set channel filter=0.000000e+000 result=40 06:08:25 Config A/D Result=40 06:08:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:25 Get A/D filter: -9.255963e+061 result=40 06:08:25 Get A/D value=-858993460 result=40 06:08:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:25 Aux= 06:08:25 Message to Camera, serial 211988 queued 06:08:33 Received message from Master: op=Shutter serial=211998 06:08:33 Shutter LASER close 06:08:33 Received message from Master: op=PointingHead serial=212002 06:08:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:08:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:08:34 Point started: ret=0 06:08:34 point_skyscan result=0 06:08:35 Check angles 06:08:35 SkyScan query 06:08:35 SkyScan query done: ret=0 az=90.12<-6008 ze=157.44<-1504 Statuses=0009 0009 06:08:35 Msec=0 True Az=90.12 Ze=157.44 Az status=0009 Ze status=0009 06:08:35 Check angles 06:08:35 SkyScan query 06:08:36 SkyScan query done: ret=0 az=72.255<-4817 ze=136.065<-2929 Statuses=0009 0009 06:08:36 Msec=750 True Az=72.255 Ze=136.065 Az status=0009 Ze status=0009 06:08:36 Check angles 06:08:36 SkyScan query 06:08:37 SkyScan query done: ret=0 az=54.6<-3640 ze=114.63<-4358 Statuses=0009 0009 06:08:37 Msec=1500 True Az=54.6 Ze=114.63 Az status=0009 Ze status=0009 06:08:37 Check angles 06:08:37 SkyScan query 06:08:37 SkyScan query done: ret=0 az=40.935<-2729 ze=93.69<-5754 Statuses=0009 0009 06:08:37 Msec=2250 True Az=40.935 Ze=93.69 Az status=0009 Ze status=0009 06:08:38 Check angles 06:08:38 SkyScan query 06:08:38 SkyScan query done: ret=0 az=40.995<-2733 ze=72.3<-7180 Statuses=0008 0009 06:08:38 Msec=3000 True Az=40.995 Ze=72.3 Az status=0008 Ze status=0009 06:08:38 Check angles 06:08:38 SkyScan query 06:08:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.005<-8533 Statuses=0008 0009 06:08:39 Msec=3750 True Az=40.995 Ze=52.005 Az status=0008 Ze status=0009 06:08:39 Check angles 06:08:39 SkyScan query 06:08:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:08:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:08:40 Message to Master queued w/err=0: serial=212002 error=0 06:08:45 Received message from Master: op=Filter serial=212003 06:08:45 Color wheel filter change from 0 to 0 06:08:45 FLIGetFilterPos err=0 currentPosition=0 06:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:45 Filter is already there-color wheel unchanged 06:08:45 Received message from Master: op=Shutter serial=212004 06:08:45 Shutter LASER close 06:08:45 Received message from Camera: op=State serial=212006 06:08:45 GetSingleValue result=40 Value=cccccccc 06:08:45 SkyScan query 06:08:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:08:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:46 Parameters OK 06:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:46 Set A/D data flow result=40 06:08:46 Set A/D channel type result=40 06:08:46 Set A/D encoding result=40 06:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:46 Set channel filter=0.000000e+000 result=40 06:08:46 Config A/D Result=40 06:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:46 Get A/D filter: -9.255963e+061 result=40 06:08:46 Get A/D value=-858993460 result=40 06:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:46 Parameters OK 06:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:46 Set A/D data flow result=40 06:08:46 Set A/D channel type result=40 06:08:46 Set A/D encoding result=40 06:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:46 Set channel filter=0.000000e+000 result=40 06:08:46 Config A/D Result=40 06:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:46 Get A/D filter: -9.255963e+061 result=40 06:08:46 Get A/D value=-858993460 result=40 06:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:46 Aux= 06:08:46 Message to Camera, serial 212006 queued 06:09:23 Received message from Master: op=PointingHead serial=212019 06:09:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:09:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:09:23 Point started: ret=0 06:09:23 point_skyscan result=0 06:09:24 Check angles 06:09:24 SkyScan query 06:09:24 SkyScan query done: ret=0 az=64.44<-4296 ze=81.795<-6547 Statuses=0009 0009 06:09:24 Msec=0 True Az=64.44 Ze=81.795 Az status=0009 Ze status=0009 06:09:25 Check angles 06:09:25 SkyScan query 06:09:25 SkyScan query done: ret=0 az=81.945<-5463 ze=102.705<-5153 Statuses=0009 0009 06:09:25 Msec=750 True Az=81.945 Ze=102.705 Az status=0009 Ze status=0009 06:09:25 Check angles 06:09:25 SkyScan query 06:09:26 SkyScan query done: ret=0 az=99.45<-6630 ze=123.66<-3756 Statuses=0009 0009 06:09:26 Msec=1500 True Az=99.45 Ze=123.66 Az status=0009 Ze status=0009 06:09:26 Check angles 06:09:26 SkyScan query 06:09:27 SkyScan query done: ret=0 az=116.94<-7796 ze=144.6<-2360 Statuses=0009 0009 06:09:27 Msec=2250 True Az=116.94 Ze=144.6 Az status=0009 Ze status=0009 06:09:27 Check angles 06:09:27 SkyScan query 06:09:27 SkyScan query done: ret=0 az=131.07<-8738 ze=165.555<-963 Statuses=0009 0009 06:09:27 Msec=3000 True Az=131.07 Ze=165.555 Az status=0009 Ze status=0009 06:09:28 Check angles 06:09:28 SkyScan query 06:09:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.01<-23534 Statuses=0008 0009 06:09:28 Msec=3750 True Az=131.01 Ze=-173.01 Az status=0008 Ze status=0009 06:09:28 Check angles 06:09:28 SkyScan query 06:09:29 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.68<-22112 Statuses=0008 0009 06:09:29 Msec=4500 True Az=130.995 Ze=-151.68 Az status=0008 Ze status=0009 06:09:29 Check angles 06:09:29 SkyScan query 06:09:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.45<-21430 Statuses=0008 0008 06:09:30 Msec=5250 True Az=130.995 Ze=-141.45 Az status=0008 Ze status=0008 06:09:30 Message to Master queued w/err=0: serial=212019 error=0 06:09:35 Received message from Master: op=Filter serial=212020 06:09:35 Color wheel filter change from 0 to 0 06:09:35 FLIGetFilterPos err=0 currentPosition=0 06:09:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:35 Filter is already there-color wheel unchanged 06:09:35 Received message from Master: op=Shutter serial=212021 06:09:35 Shutter LASER close 06:09:35 Received message from Camera: op=State serial=212023 06:09:35 GetSingleValue result=40 Value=cccccccc 06:09:35 SkyScan query 06:09:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:09:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:36 Parameters OK 06:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:36 Set A/D data flow result=40 06:09:36 Set A/D channel type result=40 06:09:36 Set A/D encoding result=40 06:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:36 Set channel filter=0.000000e+000 result=40 06:09:36 Config A/D Result=40 06:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:36 Get A/D filter: -9.255963e+061 result=40 06:09:36 Get A/D value=-858993460 result=40 06:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:36 Parameters OK 06:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:36 Set A/D data flow result=40 06:09:36 Set A/D channel type result=40 06:09:36 Set A/D encoding result=40 06:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:36 Set channel filter=0.000000e+000 result=40 06:09:36 Config A/D Result=40 06:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:36 Get A/D filter: -9.255963e+061 result=40 06:09:36 Get A/D value=-858993460 result=40 06:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:36 Aux= 06:09:36 Message to Camera, serial 212023 queued 06:10:11 Received message from Master: op=PointingHead serial=212035 06:10:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:10:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:10:12 Point started: ret=0 06:10:12 point_skyscan result=0 06:10:13 Check angles 06:10:13 SkyScan query 06:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.405<-23427 Statuses=0009 0009 06:10:13 Msec=0 True Az=112.995 Ze=-171.405 Az status=0009 Ze status=0009 06:10:13 Check angles 06:10:13 SkyScan query 06:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:10:14 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:10:14 Message to Master queued w/err=0: serial=212035 error=0 06:10:19 Received message from Master: op=Filter serial=212036 06:10:19 Color wheel filter change from 0 to 0 06:10:19 FLIGetFilterPos err=0 currentPosition=0 06:10:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:19 Filter is already there-color wheel unchanged 06:10:19 Received message from Master: op=Shutter serial=212037 06:10:19 Shutter LASER open 06:10:19 Received message from Camera: op=State serial=212039 06:10:19 GetSingleValue result=40 Value=cccccccc 06:10:19 SkyScan query 06:10:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:10:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:20 Parameters OK 06:10:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:20 Set A/D data flow result=40 06:10:20 Set A/D channel type result=40 06:10:20 Set A/D encoding result=40 06:10:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:20 Set channel filter=0.000000e+000 result=40 06:10:20 Config A/D Result=40 06:10:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:20 Get A/D filter: -9.255963e+061 result=40 06:10:20 Get A/D value=-858993460 result=40 06:10:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:20 Parameters OK 06:10:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:20 Set A/D data flow result=40 06:10:20 Set A/D channel type result=40 06:10:20 Set A/D encoding result=40 06:10:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:20 Set channel filter=0.000000e+000 result=40 06:10:20 Config A/D Result=40 06:10:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:20 Get A/D filter: -9.255963e+061 result=40 06:10:20 Get A/D value=-858993460 result=40 06:10:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:20 Aux= 06:10:20 Message to Camera, serial 212039 queued 06:10:28 Received message from Master: op=Shutter serial=212049 06:10:28 Shutter LASER close 06:10:29 Received message from Master: op=PointingHead serial=212053 06:10:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:10:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:10:29 Point started: ret=0 06:10:29 point_skyscan result=0 06:10:30 Check angles 06:10:30 SkyScan query 06:10:30 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.905<-21527 Statuses=0009 0009 06:10:30 Msec=0 True Az=136.215 Ze=-142.905 Az status=0009 Ze status=0009 06:10:31 Check angles 06:10:31 SkyScan query 06:10:31 SkyScan query done: ret=0 az=154.17<-10278 ze=-121.545<-20103 Statuses=0009 0009 06:10:31 Msec=750 True Az=154.17 Ze=-121.545 Az status=0009 Ze status=0009 06:10:31 Check angles 06:10:31 SkyScan query 06:10:32 SkyScan query done: ret=0 az=171.6<-11440 ze=-100.5<-18700 Statuses=0009 0009 06:10:32 Msec=1500 True Az=171.6 Ze=-100.5 Az status=0009 Ze status=0009 06:10:32 Check angles 06:10:32 SkyScan query 06:10:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 06:10:33 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 06:10:33 Check angles 06:10:33 SkyScan query 06:10:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.17<-15878 Statuses=0008 0009 06:10:33 Msec=3000 True Az=176.01 Ze=-58.17 Az status=0008 Ze status=0009 06:10:34 Check angles 06:10:34 SkyScan query 06:10:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:10:34 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:10:34 Message to Master queued w/err=0: serial=212053 error=0 06:10:39 Received message from Master: op=Filter serial=212054 06:10:39 Color wheel filter change from 0 to 0 06:10:39 FLIGetFilterPos err=0 currentPosition=0 06:10:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:39 Filter is already there-color wheel unchanged 06:10:39 Received message from Master: op=Shutter serial=212055 06:10:39 Shutter LASER close 06:10:40 Received message from Camera: op=State serial=212057 06:10:40 GetSingleValue result=40 Value=cccccccc 06:10:40 SkyScan query 06:10:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:10:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:40 Parameters OK 06:10:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:40 Set A/D data flow result=40 06:10:40 Set A/D channel type result=40 06:10:40 Set A/D encoding result=40 06:10:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:40 Set channel filter=0.000000e+000 result=40 06:10:40 Config A/D Result=40 06:10:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:40 Get A/D filter: -9.255963e+061 result=40 06:10:40 Get A/D value=-858993460 result=40 06:10:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:40 Parameters OK 06:10:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:40 Set A/D data flow result=40 06:10:40 Set A/D channel type result=40 06:10:40 Set A/D encoding result=40 06:10:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:40 Set channel filter=0.000000e+000 result=40 06:10:40 Config A/D Result=40 06:10:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:40 Get A/D filter: -9.255963e+061 result=40 06:10:40 Get A/D value=-858993460 result=40 06:10:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:40 Aux= 06:10:40 Message to Camera, serial 212057 queued 06:11:17 Received message from Master: op=PointingHead serial=212070 06:11:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:11:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:11:17 Point started: ret=0 06:11:17 point_skyscan result=0 06:11:18 Check angles 06:11:18 SkyScan query 06:11:19 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.705<-13447 Statuses=0009 0009 06:11:19 Msec=0 True Az=152.91 Ze=-21.705 Az status=0009 Ze status=0009 06:11:19 Check angles 06:11:19 SkyScan query 06:11:20 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.675<-12045 Statuses=0009 0009 06:11:20 Msec=750 True Az=135.45 Ze=-0.675 Az status=0009 Ze status=0009 06:11:20 Check angles 06:11:20 SkyScan query 06:11:20 SkyScan query done: ret=0 az=117.96<-7864 ze=20.205<-10653 Statuses=0009 0009 06:11:20 Msec=1500 True Az=117.96 Ze=20.205 Az status=0009 Ze status=0009 06:11:20 Check angles 06:11:20 SkyScan query 06:11:21 SkyScan query done: ret=0 az=100.47<-6698 ze=41.235<-9251 Statuses=0009 0009 06:11:21 Msec=2250 True Az=100.47 Ze=41.235 Az status=0009 Ze status=0009 06:11:21 Check angles 06:11:21 SkyScan query 06:11:22 SkyScan query done: ret=0 az=85.98<-5732 ze=51.6<-8560 Statuses=0009 0008 06:11:22 Msec=3000 True Az=85.98 Ze=51.6 Az status=0009 Ze status=0008 06:11:22 Check angles 06:11:22 SkyScan query 06:11:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:11:23 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:11:23 Message to Master queued w/err=0: serial=212070 error=0 06:11:28 Received message from Master: op=Filter serial=212071 06:11:28 Color wheel filter change from 0 to 0 06:11:28 FLIGetFilterPos err=0 currentPosition=0 06:11:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:28 Filter is already there-color wheel unchanged 06:11:28 Received message from Master: op=Shutter serial=212072 06:11:28 Shutter LASER close 06:11:28 Received message from Camera: op=State serial=212074 06:11:28 GetSingleValue result=40 Value=cccccccc 06:11:28 SkyScan query 06:11:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:11:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:28 Parameters OK 06:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:28 Set A/D data flow result=40 06:11:28 Set A/D channel type result=40 06:11:28 Set A/D encoding result=40 06:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:28 Set channel filter=0.000000e+000 result=40 06:11:28 Config A/D Result=40 06:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:28 Get A/D filter: -9.255963e+061 result=40 06:11:28 Get A/D value=-858993460 result=40 06:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:28 Parameters OK 06:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:28 Set A/D data flow result=40 06:11:28 Set A/D channel type result=40 06:11:28 Set A/D encoding result=40 06:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:28 Set channel filter=0.000000e+000 result=40 06:11:28 Config A/D Result=40 06:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:28 Get A/D filter: -9.255963e+061 result=40 06:11:28 Get A/D value=-858993460 result=40 06:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:28 Aux= 06:11:28 Message to Camera, serial 212074 queued 06:12:05 Received message from Master: op=PointingHead serial=212087 06:12:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:12:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:12:06 Point started: ret=0 06:12:06 point_skyscan result=0 06:12:06 Check angles 06:12:06 SkyScan query 06:12:07 SkyScan query done: ret=0 az=85.995<-5733 ze=21.885<-10541 Statuses=0008 0009 06:12:07 Msec=0 True Az=85.995 Ze=21.885 Az status=0008 Ze status=0009 06:12:07 Check angles 06:12:07 SkyScan query 06:12:08 SkyScan query done: ret=0 az=85.995<-5733 ze=0.975<-11935 Statuses=0008 0009 06:12:08 Msec=750 True Az=85.995 Ze=0.975 Az status=0008 Ze status=0009 06:12:08 Check angles 06:12:08 SkyScan query 06:12:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.01<-13334 Statuses=0008 0009 06:12:08 Msec=1500 True Az=85.995 Ze=-20.01 Az status=0008 Ze status=0009 06:12:09 Check angles 06:12:09 SkyScan query 06:12:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.385<-14759 Statuses=0008 0009 06:12:09 Msec=2250 True Az=85.995 Ze=-41.385 Az status=0008 Ze status=0009 06:12:09 Check angles 06:12:09 SkyScan query 06:12:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:12:10 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:12:10 Message to Master queued w/err=0: serial=212087 error=0 06:12:15 Received message from Master: op=Filter serial=212088 06:12:15 Color wheel filter change from 0 to 0 06:12:15 FLIGetFilterPos err=0 currentPosition=0 06:12:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:15 Filter is already there-color wheel unchanged 06:12:15 Received message from Master: op=Shutter serial=212089 06:12:15 Shutter LASER close 06:12:15 Received message from Camera: op=State serial=212091 06:12:15 GetSingleValue result=40 Value=cccccccc 06:12:15 SkyScan query 06:12:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:12:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:16 Parameters OK 06:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:16 Set A/D data flow result=40 06:12:16 Set A/D channel type result=40 06:12:16 Set A/D encoding result=40 06:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:16 Set channel filter=0.000000e+000 result=40 06:12:16 Config A/D Result=40 06:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:16 Get A/D filter: -9.255963e+061 result=40 06:12:16 Get A/D value=-858993460 result=40 06:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:16 Parameters OK 06:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:16 Set A/D data flow result=40 06:12:16 Set A/D channel type result=40 06:12:16 Set A/D encoding result=40 06:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:16 Set channel filter=0.000000e+000 result=40 06:12:16 Config A/D Result=40 06:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:16 Get A/D filter: -9.255963e+061 result=40 06:12:16 Get A/D value=-858993460 result=40 06:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:16 Aux= 06:12:16 Message to Camera, serial 212091 queued 06:12:53 Received message from Master: op=PointingHead serial=212104 06:12:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:12:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:12:53 Point started: ret=0 06:12:53 point_skyscan result=0 06:12:54 Check angles 06:12:54 SkyScan query 06:12:54 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.315<-17421 Statuses=0009 0009 06:12:54 Msec=0 True Az=109.005 Ze=-81.315 Az status=0009 Ze status=0009 06:12:54 Check angles 06:12:54 SkyScan query 06:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 06:12:55 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 06:12:55 Check angles 06:12:55 SkyScan query 06:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 06:12:56 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 06:12:56 Check angles 06:12:56 SkyScan query 06:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 06:12:57 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 06:12:57 Check angles 06:12:57 SkyScan query 06:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 06:12:57 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 06:12:57 Check angles 06:12:57 SkyScan query 06:12:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 06:12:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 06:12:58 Message to Master queued w/err=0: serial=212104 error=0 06:13:03 Received message from Master: op=Filter serial=212105 06:13:03 Color wheel filter change from 0 to 0 06:13:03 FLIGetFilterPos err=0 currentPosition=0 06:13:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:03 Filter is already there-color wheel unchanged 06:13:03 Received message from Master: op=Shutter serial=212106 06:13:03 Shutter LASER open 06:13:03 Received message from Camera: op=State serial=212108 06:13:03 GetSingleValue result=40 Value=cccccccc 06:13:03 SkyScan query 06:13:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:13:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:04 Parameters OK 06:13:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:04 Set A/D data flow result=40 06:13:04 Set A/D channel type result=40 06:13:04 Set A/D encoding result=40 06:13:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:04 Set channel filter=0.000000e+000 result=40 06:13:04 Config A/D Result=40 06:13:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:04 Get A/D filter: -9.255963e+061 result=40 06:13:04 Get A/D value=-858993460 result=40 06:13:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:04 Parameters OK 06:13:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:04 Set A/D data flow result=40 06:13:04 Set A/D channel type result=40 06:13:04 Set A/D encoding result=40 06:13:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:04 Set channel filter=0.000000e+000 result=40 06:13:04 Config A/D Result=40 06:13:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:04 Get A/D filter: -9.255963e+061 result=40 06:13:04 Get A/D value=-858993460 result=40 06:13:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:04 Aux= 06:13:04 Message to Camera, serial 212108 queued 06:13:12 Received message from Master: op=Shutter serial=212118 06:13:12 Shutter LASER close 06:13:13 Received message from Master: op=PointingHead serial=212122 06:13:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:13:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:13:13 Point started: ret=0 06:13:13 point_skyscan result=0 06:13:14 Check angles 06:13:14 SkyScan query 06:13:14 SkyScan query done: ret=0 az=89.64<-5976 ze=156.96<-1536 Statuses=0009 0009 06:13:14 Msec=0 True Az=89.64 Ze=156.96 Az status=0009 Ze status=0009 06:13:15 Check angles 06:13:15 SkyScan query 06:13:15 SkyScan query done: ret=0 az=72.21<-4814 ze=136.005<-2933 Statuses=0009 0009 06:13:15 Msec=750 True Az=72.21 Ze=136.005 Az status=0009 Ze status=0009 06:13:15 Check angles 06:13:15 SkyScan query 06:13:16 SkyScan query done: ret=0 az=54.585<-3639 ze=114.57<-4362 Statuses=0009 0009 06:13:16 Msec=1500 True Az=54.585 Ze=114.57 Az status=0009 Ze status=0009 06:13:16 Check angles 06:13:16 SkyScan query 06:13:17 SkyScan query done: ret=0 az=40.965<-2731 ze=93.645<-5757 Statuses=0009 0009 06:13:17 Msec=2250 True Az=40.965 Ze=93.645 Az status=0009 Ze status=0009 06:13:17 Check angles 06:13:17 SkyScan query 06:13:17 SkyScan query done: ret=0 az=40.995<-2733 ze=72.66<-7156 Statuses=0008 0009 06:13:17 Msec=3000 True Az=40.995 Ze=72.66 Az status=0008 Ze status=0009 06:13:18 Check angles 06:13:18 SkyScan query 06:13:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 06:13:18 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 06:13:18 Check angles 06:13:18 SkyScan query 06:13:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:13:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:13:19 Message to Master queued w/err=0: serial=212122 error=0 06:13:24 Received message from Master: op=Filter serial=212123 06:13:24 Color wheel filter change from 0 to 0 06:13:24 FLIGetFilterPos err=0 currentPosition=0 06:13:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:24 Filter is already there-color wheel unchanged 06:13:24 Received message from Master: op=Shutter serial=212124 06:13:24 Shutter LASER close 06:13:24 Received message from Camera: op=State serial=212126 06:13:24 GetSingleValue result=40 Value=cccccccc 06:13:24 SkyScan query 06:13:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:13:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:25 Parameters OK 06:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:25 Set A/D data flow result=40 06:13:25 Set A/D channel type result=40 06:13:25 Set A/D encoding result=40 06:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:25 Set channel filter=0.000000e+000 result=40 06:13:25 Config A/D Result=40 06:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:25 Get A/D filter: -9.255963e+061 result=40 06:13:25 Get A/D value=-858993460 result=40 06:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:25 Parameters OK 06:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:25 Set A/D data flow result=40 06:13:25 Set A/D channel type result=40 06:13:25 Set A/D encoding result=40 06:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:25 Set channel filter=0.000000e+000 result=40 06:13:25 Config A/D Result=40 06:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:25 Get A/D filter: -9.255963e+061 result=40 06:13:25 Get A/D value=-858993460 result=40 06:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:25 Aux= 06:13:25 Message to Camera, serial 212126 queued 06:14:02 Received message from Master: op=PointingHead serial=212139 06:14:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:14:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:14:02 Point started: ret=0 06:14:02 point_skyscan result=0 06:14:03 Check angles 06:14:03 SkyScan query 06:14:04 SkyScan query done: ret=0 az=63.705<-4247 ze=81.03<-6598 Statuses=0009 0009 06:14:04 Msec=0 True Az=63.705 Ze=81.03 Az status=0009 Ze status=0009 06:14:04 Check angles 06:14:04 SkyScan query 06:14:04 SkyScan query done: ret=0 az=81.51<-5434 ze=102.42<-5172 Statuses=0009 0009 06:14:04 Msec=750 True Az=81.51 Ze=102.42 Az status=0009 Ze status=0009 06:14:05 Check angles 06:14:05 SkyScan query 06:14:05 SkyScan query done: ret=0 az=98.925<-6595 ze=123.36<-3776 Statuses=0009 0009 06:14:05 Msec=1500 True Az=98.925 Ze=123.36 Az status=0009 Ze status=0009 06:14:05 Check angles 06:14:05 SkyScan query 06:14:06 SkyScan query done: ret=0 az=116.535<-7769 ze=144.315<-2379 Statuses=0009 0009 06:14:06 Msec=2250 True Az=116.535 Ze=144.315 Az status=0009 Ze status=0009 06:14:06 Check angles 06:14:06 SkyScan query 06:14:07 SkyScan query done: ret=0 az=131.025<-8735 ze=165.255<-983 Statuses=0009 0009 06:14:07 Msec=3000 True Az=131.025 Ze=165.255 Az status=0009 Ze status=0009 06:14:07 Check angles 06:14:07 SkyScan query 06:14:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.805<-23587 Statuses=0008 0009 06:14:07 Msec=3750 True Az=131.01 Ze=-173.805 Az status=0008 Ze status=0009 06:14:08 Check angles 06:14:08 SkyScan query 06:14:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.385<-22159 Statuses=0008 0009 06:14:08 Msec=4500 True Az=130.995 Ze=-152.385 Az status=0008 Ze status=0009 06:14:08 Check angles 06:14:08 SkyScan query 06:14:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:14:09 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:14:09 Message to Master queued w/err=0: serial=212139 error=0 06:14:14 Received message from Master: op=Filter serial=212140 06:14:14 Color wheel filter change from 0 to 0 06:14:14 FLIGetFilterPos err=0 currentPosition=0 06:14:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:14 Filter is already there-color wheel unchanged 06:14:14 Received message from Master: op=Shutter serial=212141 06:14:14 Shutter LASER close 06:14:14 Received message from Camera: op=State serial=212143 06:14:14 GetSingleValue result=40 Value=cccccccc 06:14:14 SkyScan query 06:14:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:14:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:15 Parameters OK 06:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:15 Set A/D data flow result=40 06:14:15 Set A/D channel type result=40 06:14:15 Set A/D encoding result=40 06:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:15 Set channel filter=0.000000e+000 result=40 06:14:15 Config A/D Result=40 06:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:15 Get A/D filter: -9.255963e+061 result=40 06:14:15 Get A/D value=-858993460 result=40 06:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:15 Parameters OK 06:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:15 Set A/D data flow result=40 06:14:15 Set A/D channel type result=40 06:14:15 Set A/D encoding result=40 06:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:15 Set channel filter=0.000000e+000 result=40 06:14:15 Config A/D Result=40 06:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:15 Get A/D filter: -9.255963e+061 result=40 06:14:15 Get A/D value=-858993460 result=40 06:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:15 Aux= 06:14:15 Message to Camera, serial 212143 queued 06:14:52 Received message from Master: op=PointingHead serial=212156 06:14:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:14:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:14:52 Point started: ret=0 06:14:52 point_skyscan result=0 06:14:53 Check angles 06:14:53 SkyScan query 06:14:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.27<-23418 Statuses=0009 0009 06:14:53 Msec=0 True Az=112.995 Ze=-171.27 Az status=0009 Ze status=0009 06:14:53 Check angles 06:14:53 SkyScan query 06:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:14:54 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:14:54 Message to Master queued w/err=0: serial=212156 error=0 06:14:59 Received message from Master: op=Filter serial=212157 06:14:59 Color wheel filter change from 0 to 0 06:14:59 FLIGetFilterPos err=0 currentPosition=0 06:14:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:59 Filter is already there-color wheel unchanged 06:14:59 Received message from Master: op=Shutter serial=212158 06:14:59 Shutter LASER open 06:14:59 Received message from Camera: op=State serial=212160 06:14:59 GetSingleValue result=40 Value=cccccccc 06:14:59 SkyScan query 06:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:15:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2018-12-17 06:15:00] 06:15:00 Parameters OK 06:15:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:00 Set A/D data flow result=40 06:15:00 Set A/D channel type result=40 06:15:00 Set A/D encoding result=40 06:15:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:00 Set channel filter=0.000000e+000 result=40 06:15:00 Config A/D Result=40 06:15:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:00 Get A/D filter: -9.255963e+061 result=40 06:15:00 Get A/D value=-858993460 result=40 06:15:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:00 Parameters OK 06:15:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:00 Set A/D data flow result=40 06:15:00 Set A/D channel type result=40 06:15:00 Set A/D encoding result=40 06:15:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:00 Set channel filter=0.000000e+000 result=40 06:15:00 Config A/D Result=40 06:15:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:00 Get A/D filter: -9.255963e+061 result=40 06:15:00 Get A/D value=-858993460 result=40 06:15:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:00 Aux= 06:15:00 Message to Camera, serial 212160 queued 06:15:07 Received message from Master: op=Shutter serial=212169 06:15:08 Shutter LASER close 06:15:08 Received message from Master: op=PointingHead serial=212173 06:15:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:15:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:15:08 Point started: ret=0 06:15:08 point_skyscan result=0 06:15:09 Check angles 06:15:09 SkyScan query 06:15:10 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.265<-21551 Statuses=0009 0009 06:15:10 Msec=0 True Az=135.885 Ze=-143.265 Az status=0009 Ze status=0009 06:15:10 Check angles 06:15:10 SkyScan query 06:15:11 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.31<-20154 Statuses=0009 0009 06:15:11 Msec=750 True Az=153.435 Ze=-122.31 Az status=0009 Ze status=0009 06:15:11 Check angles 06:15:11 SkyScan query 06:15:11 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.46<-18764 Statuses=0009 0009 06:15:11 Msec=1500 True Az=170.85 Ze=-101.46 Az status=0009 Ze status=0009 06:15:11 Check angles 06:15:11 SkyScan query 06:15:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.43<-17362 Statuses=0008 0009 06:15:12 Msec=2250 True Az=175.995 Ze=-80.43 Az status=0008 Ze status=0009 06:15:12 Check angles 06:15:12 SkyScan query 06:15:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.49<-15966 Statuses=0008 0009 06:15:13 Msec=3000 True Az=175.995 Ze=-59.49 Az status=0008 Ze status=0009 06:15:13 Check angles 06:15:13 SkyScan query 06:15:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:15:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:15:14 Message to Master queued w/err=0: serial=212173 error=0 06:15:19 Received message from Master: op=Filter serial=212174 06:15:19 Color wheel filter change from 0 to 0 06:15:19 FLIGetFilterPos err=0 currentPosition=0 06:15:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:19 Filter is already there-color wheel unchanged 06:15:19 Received message from Master: op=Shutter serial=212175 06:15:19 Shutter LASER close 06:15:19 Received message from Camera: op=State serial=212177 06:15:19 GetSingleValue result=40 Value=cccccccc 06:15:19 SkyScan query 06:15:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:15:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:19 Parameters OK 06:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:19 Set A/D data flow result=40 06:15:19 Set A/D channel type result=40 06:15:19 Set A/D encoding result=40 06:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:19 Set channel filter=0.000000e+000 result=40 06:15:19 Config A/D Result=40 06:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:19 Get A/D filter: -9.255963e+061 result=40 06:15:19 Get A/D value=-858993460 result=40 06:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:19 Parameters OK 06:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:19 Set A/D data flow result=40 06:15:19 Set A/D channel type result=40 06:15:19 Set A/D encoding result=40 06:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:19 Set channel filter=0.000000e+000 result=40 06:15:19 Config A/D Result=40 06:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:19 Get A/D filter: -9.255963e+061 result=40 06:15:19 Get A/D value=-858993460 result=40 06:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:19 Aux= 06:15:19 Message to Camera, serial 212177 queued 06:15:27 Received message from Master: op=Identify serial=212178 [UTC 2018-12-17 06:15:52] 06:15:56 Received message from Master: op=PointingHead serial=212193 06:15:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:15:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:15:57 Point started: ret=0 06:15:57 point_skyscan result=0 06:15:57 Check angles 06:15:57 SkyScan query 06:15:58 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 06:15:58 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 06:15:58 Check angles 06:15:58 SkyScan query 06:15:59 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.27<-12018 Statuses=0009 0009 06:15:59 Msec=750 True Az=135.12 Ze=-0.27 Az status=0009 Ze status=0009 06:15:59 Check angles 06:15:59 SkyScan query 06:15:59 SkyScan query done: ret=0 az=117.585<-7839 ze=20.67<-10622 Statuses=0009 0009 06:15:59 Msec=1500 True Az=117.585 Ze=20.67 Az status=0009 Ze status=0009 06:16:00 Check angles 06:16:00 SkyScan query 06:16:00 SkyScan query done: ret=0 az=100.245<-6683 ze=41.625<-9225 Statuses=0009 0009 06:16:00 Msec=2250 True Az=100.245 Ze=41.625 Az status=0009 Ze status=0009 06:16:00 Check angles 06:16:00 SkyScan query 06:16:01 SkyScan query done: ret=0 az=86.01<-5734 ze=51.6<-8560 Statuses=0009 0008 06:16:01 Msec=3000 True Az=86.01 Ze=51.6 Az status=0009 Ze status=0008 06:16:01 Check angles 06:16:01 SkyScan query 06:16:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:16:02 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:16:02 Message to Master queued w/err=0: serial=212193 error=0 06:16:07 Received message from Master: op=Filter serial=212194 06:16:07 Color wheel filter change from 0 to 0 06:16:07 FLIGetFilterPos err=0 currentPosition=0 06:16:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:07 Filter is already there-color wheel unchanged 06:16:07 Received message from Master: op=Shutter serial=212195 06:16:07 Shutter LASER close 06:16:07 Received message from Camera: op=State serial=212197 06:16:07 GetSingleValue result=40 Value=cccccccc 06:16:07 SkyScan query 06:16:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:16:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:08 Parameters OK 06:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:08 Set A/D data flow result=40 06:16:08 Set A/D channel type result=40 06:16:08 Set A/D encoding result=40 06:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:08 Set channel filter=0.000000e+000 result=40 06:16:08 Config A/D Result=40 06:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:08 Get A/D filter: -9.255963e+061 result=40 06:16:08 Get A/D value=-858993460 result=40 06:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:08 Parameters OK 06:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:08 Set A/D data flow result=40 06:16:08 Set A/D channel type result=40 06:16:08 Set A/D encoding result=40 06:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:08 Set channel filter=0.000000e+000 result=40 06:16:08 Config A/D Result=40 06:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:08 Get A/D filter: -9.255963e+061 result=40 06:16:08 Get A/D value=-858993460 result=40 06:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:08 Aux= 06:16:08 Message to Camera, serial 212197 queued 06:16:44 Received message from Master: op=PointingHead serial=212210 06:16:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:16:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:16:45 Point started: ret=0 06:16:45 point_skyscan result=0 06:16:46 Check angles 06:16:46 SkyScan query 06:16:46 SkyScan query done: ret=0 az=85.995<-5733 ze=21.675<-10555 Statuses=0008 0009 06:16:46 Msec=0 True Az=85.995 Ze=21.675 Az status=0008 Ze status=0009 06:16:46 Check angles 06:16:46 SkyScan query 06:16:47 SkyScan query done: ret=0 az=86.01<-5734 ze=0.3<-11980 Statuses=0008 0009 06:16:47 Msec=750 True Az=86.01 Ze=0.3 Az status=0008 Ze status=0009 06:16:47 Check angles 06:16:47 SkyScan query 06:16:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.67<-13378 Statuses=0008 0009 06:16:48 Msec=1500 True Az=85.995 Ze=-20.67 Az status=0008 Ze status=0009 06:16:48 Check angles 06:16:48 SkyScan query 06:16:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.595<-14773 Statuses=0008 0009 06:16:48 Msec=2250 True Az=85.995 Ze=-41.595 Az status=0008 Ze status=0009 06:16:49 Check angles 06:16:49 SkyScan query 06:16:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:16:49 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:16:49 Message to Master queued w/err=0: serial=212210 error=0 06:16:54 Received message from Master: op=Filter serial=212211 06:16:54 Color wheel filter change from 0 to 0 06:16:54 FLIGetFilterPos err=0 currentPosition=0 06:16:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:54 Filter is already there-color wheel unchanged 06:16:54 Received message from Master: op=Shutter serial=212212 06:16:54 Shutter LASER close 06:16:54 Received message from Camera: op=State serial=212214 06:16:54 GetSingleValue result=40 Value=cccccccc 06:16:54 SkyScan query 06:16:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:16:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:55 Parameters OK 06:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:55 Set A/D data flow result=40 06:16:55 Set A/D channel type result=40 06:16:55 Set A/D encoding result=40 06:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:55 Set channel filter=0.000000e+000 result=40 06:16:55 Config A/D Result=40 06:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:55 Get A/D filter: -9.255963e+061 result=40 06:16:55 Get A/D value=-858993460 result=40 06:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:55 Parameters OK 06:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:55 Set A/D data flow result=40 06:16:55 Set A/D channel type result=40 06:16:55 Set A/D encoding result=40 06:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:55 Set channel filter=0.000000e+000 result=40 06:16:55 Config A/D Result=40 06:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:55 Get A/D filter: -9.255963e+061 result=40 06:16:55 Get A/D value=-858993460 result=40 06:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:55 Aux= 06:16:55 Message to Camera, serial 212214 queued 06:17:32 Received message from Master: op=PointingHead serial=212227 06:17:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:17:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:17:32 Point started: ret=0 06:17:32 point_skyscan result=0 06:17:33 Check angles 06:17:33 SkyScan query 06:17:33 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.315<-17421 Statuses=0009 0009 06:17:33 Msec=0 True Az=109.035 Ze=-81.315 Az status=0009 Ze status=0009 06:17:34 Check angles 06:17:34 SkyScan query 06:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 06:17:34 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 06:17:34 Check angles 06:17:34 SkyScan query 06:17:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 06:17:35 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 06:17:35 Check angles 06:17:35 SkyScan query 06:17:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 06:17:36 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 06:17:36 Check angles 06:17:36 SkyScan query 06:17:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 06:17:37 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 06:17:37 Check angles 06:17:37 SkyScan query 06:17:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:17:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:17:37 Message to Master queued w/err=0: serial=212227 error=0 06:17:42 Received message from Master: op=Filter serial=212228 06:17:42 Color wheel filter change from 0 to 0 06:17:42 FLIGetFilterPos err=0 currentPosition=0 06:17:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:42 Filter is already there-color wheel unchanged 06:17:42 Received message from Master: op=Shutter serial=212229 06:17:42 Shutter LASER open 06:17:43 Received message from Camera: op=State serial=212231 06:17:43 GetSingleValue result=40 Value=cccccccc 06:17:43 SkyScan query 06:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:17:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:43 Parameters OK 06:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:43 Set A/D data flow result=40 06:17:43 Set A/D channel type result=40 06:17:43 Set A/D encoding result=40 06:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:43 Set channel filter=0.000000e+000 result=40 06:17:43 Config A/D Result=40 06:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:43 Get A/D filter: -9.255963e+061 result=40 06:17:43 Get A/D value=-858993460 result=40 06:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:43 Parameters OK 06:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:43 Set A/D data flow result=40 06:17:43 Set A/D channel type result=40 06:17:43 Set A/D encoding result=40 06:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:43 Set channel filter=0.000000e+000 result=40 06:17:43 Config A/D Result=40 06:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:43 Get A/D filter: -9.255963e+061 result=40 06:17:43 Get A/D value=-858993460 result=40 06:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:43 Aux= 06:17:43 Message to Camera, serial 212231 queued 06:17:52 Received message from Master: op=Shutter serial=212241 06:17:52 Shutter LASER close 06:17:52 Received message from Master: op=PointingHead serial=212245 06:17:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:17:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:17:52 Point started: ret=0 06:17:52 point_skyscan result=0 06:17:53 Check angles 06:17:53 SkyScan query 06:17:54 SkyScan query done: ret=0 az=90.045<-6003 ze=157.41<-1506 Statuses=0009 0009 06:17:54 Msec=0 True Az=90.045 Ze=157.41 Az status=0009 Ze status=0009 06:17:54 Check angles 06:17:54 SkyScan query 06:17:54 SkyScan query done: ret=0 az=72.6<-4840 ze=136.455<-2903 Statuses=0009 0009 06:17:54 Msec=750 True Az=72.6 Ze=136.455 Az status=0009 Ze status=0009 06:17:55 Check angles 06:17:55 SkyScan query 06:17:55 SkyScan query done: ret=0 az=54.855<-3657 ze=115.095<-4327 Statuses=0009 0009 06:17:55 Msec=1500 True Az=54.855 Ze=115.095 Az status=0009 Ze status=0009 06:17:55 Check angles 06:17:55 SkyScan query 06:17:56 SkyScan query done: ret=0 az=40.92<-2728 ze=94.14<-5724 Statuses=0009 0009 06:17:56 Msec=2250 True Az=40.92 Ze=94.14 Az status=0009 Ze status=0009 06:17:56 Check angles 06:17:56 SkyScan query 06:17:57 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 06:17:57 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 06:17:57 Check angles 06:17:57 SkyScan query 06:17:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 06:17:58 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 06:17:58 Check angles 06:17:58 SkyScan query 06:17:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:17:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:17:58 Message to Master queued w/err=0: serial=212245 error=0 06:18:03 Received message from Master: op=Filter serial=212246 06:18:03 Color wheel filter change from 0 to 0 06:18:03 FLIGetFilterPos err=0 currentPosition=0 06:18:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:03 Filter is already there-color wheel unchanged 06:18:03 Received message from Master: op=Shutter serial=212247 06:18:03 Shutter LASER close 06:18:04 Received message from Camera: op=State serial=212249 06:18:04 GetSingleValue result=40 Value=cccccccc 06:18:04 SkyScan query 06:18:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:18:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:04 Parameters OK 06:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:04 Set A/D data flow result=40 06:18:04 Set A/D channel type result=40 06:18:04 Set A/D encoding result=40 06:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:04 Set channel filter=0.000000e+000 result=40 06:18:04 Config A/D Result=40 06:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:04 Get A/D filter: -9.255963e+061 result=40 06:18:04 Get A/D value=-858993460 result=40 06:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:04 Parameters OK 06:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:04 Set A/D data flow result=40 06:18:04 Set A/D channel type result=40 06:18:04 Set A/D encoding result=40 06:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:04 Set channel filter=0.000000e+000 result=40 06:18:04 Config A/D Result=40 06:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:04 Get A/D filter: -9.255963e+061 result=40 06:18:04 Get A/D value=-858993460 result=40 06:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:04 Aux= 06:18:04 Message to Camera, serial 212249 queued 06:18:41 Received message from Master: op=PointingHead serial=212262 06:18:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:18:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:18:42 Point started: ret=0 06:18:42 point_skyscan result=0 06:18:42 Check angles 06:18:42 SkyScan query 06:18:43 SkyScan query done: ret=0 az=64.365<-4291 ze=81.75<-6550 Statuses=0009 0009 06:18:43 Msec=0 True Az=64.365 Ze=81.75 Az status=0009 Ze status=0009 06:18:43 Check angles 06:18:43 SkyScan query 06:18:44 SkyScan query done: ret=0 az=81.855<-5457 ze=102.675<-5155 Statuses=0009 0009 06:18:44 Msec=750 True Az=81.855 Ze=102.675 Az status=0009 Ze status=0009 06:18:44 Check angles 06:18:44 SkyScan query 06:18:44 SkyScan query done: ret=0 az=99.405<-6627 ze=123.615<-3759 Statuses=0009 0009 06:18:44 Msec=1500 True Az=99.405 Ze=123.615 Az status=0009 Ze status=0009 06:18:45 Check angles 06:18:45 SkyScan query 06:18:45 SkyScan query done: ret=0 az=117.3<-7820 ze=145.02<-2332 Statuses=0009 0009 06:18:45 Msec=2250 True Az=117.3 Ze=145.02 Az status=0009 Ze status=0009 06:18:45 Check angles 06:18:45 SkyScan query 06:18:46 SkyScan query done: ret=0 az=131.07<-8738 ze=166.44<-904 Statuses=0009 0009 06:18:46 Msec=3000 True Az=131.07 Ze=166.44 Az status=0009 Ze status=0009 06:18:46 Check angles 06:18:46 SkyScan query 06:18:47 SkyScan query done: ret=0 az=131.01<-8734 ze=-172.635<-23509 Statuses=0008 0009 06:18:47 Msec=3750 True Az=131.01 Ze=-172.635 Az status=0008 Ze status=0009 06:18:47 Check angles 06:18:47 SkyScan query 06:18:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.26<-22084 Statuses=0008 0009 06:18:47 Msec=4500 True Az=130.995 Ze=-151.26 Az status=0008 Ze status=0009 06:18:48 Check angles 06:18:48 SkyScan query 06:18:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.45<-21430 Statuses=0008 0008 06:18:48 Msec=5250 True Az=130.995 Ze=-141.45 Az status=0008 Ze status=0008 06:18:48 Message to Master queued w/err=0: serial=212262 error=0 06:18:53 Received message from Master: op=Filter serial=212263 06:18:53 Color wheel filter change from 0 to 0 06:18:53 FLIGetFilterPos err=0 currentPosition=0 06:18:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:53 Filter is already there-color wheel unchanged 06:18:53 Received message from Master: op=Shutter serial=212264 06:18:53 Shutter LASER close 06:18:53 Received message from Camera: op=State serial=212266 06:18:53 GetSingleValue result=40 Value=cccccccc 06:18:53 SkyScan query 06:18:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:18:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:54 Parameters OK 06:18:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:54 Set A/D data flow result=40 06:18:54 Set A/D channel type result=40 06:18:54 Set A/D encoding result=40 06:18:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:54 Set channel filter=0.000000e+000 result=40 06:18:54 Config A/D Result=40 06:18:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:54 Get A/D filter: -9.255963e+061 result=40 06:18:54 Get A/D value=-858993460 result=40 06:18:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:54 Parameters OK 06:18:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:54 Set A/D data flow result=40 06:18:54 Set A/D channel type result=40 06:18:54 Set A/D encoding result=40 06:18:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:54 Set channel filter=0.000000e+000 result=40 06:18:54 Config A/D Result=40 06:18:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:54 Get A/D filter: -9.255963e+061 result=40 06:18:54 Get A/D value=-858993460 result=40 06:18:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:54 Aux= 06:18:54 Message to Camera, serial 212266 queued 06:19:30 Received message from Master: op=PointingHead serial=212278 06:19:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:19:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:19:30 Point started: ret=0 06:19:30 point_skyscan result=0 06:19:31 Check angles 06:19:31 SkyScan query 06:19:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 06:19:32 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 06:19:32 Check angles 06:19:32 SkyScan query 06:19:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:19:32 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:19:32 Message to Master queued w/err=0: serial=212278 error=0 06:19:37 Received message from Master: op=Filter serial=212279 06:19:37 Color wheel filter change from 0 to 0 06:19:37 FLIGetFilterPos err=0 currentPosition=0 06:19:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:37 Filter is already there-color wheel unchanged 06:19:38 Received message from Master: op=Shutter serial=212280 06:19:38 Shutter LASER open 06:19:38 Received message from Camera: op=State serial=212282 06:19:38 GetSingleValue result=40 Value=cccccccc 06:19:38 SkyScan query 06:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:19:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:38 Parameters OK 06:19:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:38 Set A/D data flow result=40 06:19:38 Set A/D channel type result=40 06:19:38 Set A/D encoding result=40 06:19:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:38 Set channel filter=0.000000e+000 result=40 06:19:38 Config A/D Result=40 06:19:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:38 Get A/D filter: -9.255963e+061 result=40 06:19:38 Get A/D value=-858993460 result=40 06:19:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:38 Parameters OK 06:19:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:38 Set A/D data flow result=40 06:19:38 Set A/D channel type result=40 06:19:38 Set A/D encoding result=40 06:19:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:38 Set channel filter=0.000000e+000 result=40 06:19:38 Config A/D Result=40 06:19:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:38 Get A/D filter: -9.255963e+061 result=40 06:19:38 Get A/D value=-858993460 result=40 06:19:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:38 Aux= 06:19:38 Message to Camera, serial 212282 queued 06:19:47 Received message from Master: op=Shutter serial=212292 06:19:47 Shutter LASER close 06:19:47 Received message from Master: op=PointingHead serial=212296 06:19:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:19:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:19:48 Point started: ret=0 06:19:48 point_skyscan result=0 06:19:48 Check angles 06:19:48 SkyScan query 06:19:49 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.86<-21524 Statuses=0009 0009 06:19:49 Msec=0 True Az=136.38 Ze=-142.86 Az status=0009 Ze status=0009 06:19:49 Check angles 06:19:49 SkyScan query 06:19:50 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.89<-20126 Statuses=0009 0009 06:19:50 Msec=750 True Az=153.795 Ze=-121.89 Az status=0009 Ze status=0009 06:19:50 Check angles 06:19:50 SkyScan query 06:19:51 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.95<-18730 Statuses=0009 0009 06:19:51 Msec=1500 True Az=171.24 Ze=-100.95 Az status=0009 Ze status=0009 06:19:51 Check angles 06:19:51 SkyScan query 06:19:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.04<-17336 Statuses=0008 0009 06:19:51 Msec=2250 True Az=176.01 Ze=-80.04 Az status=0008 Ze status=0009 06:19:51 Check angles 06:19:51 SkyScan query 06:19:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.055<-15937 Statuses=0008 0009 06:19:52 Msec=3000 True Az=175.995 Ze=-59.055 Az status=0008 Ze status=0009 06:19:52 Check angles 06:19:52 SkyScan query 06:19:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:19:53 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:19:53 Message to Master queued w/err=0: serial=212296 error=0 06:19:58 Received message from Master: op=Filter serial=212297 06:19:58 Color wheel filter change from 0 to 0 06:19:58 FLIGetFilterPos err=0 currentPosition=0 06:19:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:58 Filter is already there-color wheel unchanged 06:19:58 Received message from Master: op=Shutter serial=212298 06:19:58 Shutter LASER close 06:19:58 Received message from Camera: op=State serial=212300 06:19:58 GetSingleValue result=40 Value=cccccccc 06:19:58 SkyScan query 06:19:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:19:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:59 Parameters OK 06:19:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:59 Set A/D data flow result=40 06:19:59 Set A/D channel type result=40 06:19:59 Set A/D encoding result=40 06:19:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:59 Set channel filter=0.000000e+000 result=40 06:19:59 Config A/D Result=40 06:19:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:59 Get A/D filter: -9.255963e+061 result=40 06:19:59 Get A/D value=-858993460 result=40 06:19:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:59 Parameters OK 06:19:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:59 Set A/D data flow result=40 06:19:59 Set A/D channel type result=40 06:19:59 Set A/D encoding result=40 06:19:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:59 Set channel filter=0.000000e+000 result=40 06:19:59 Config A/D Result=40 06:19:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:59 Get A/D filter: -9.255963e+061 result=40 06:19:59 Get A/D value=-858993460 result=40 06:19:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:59 Aux= 06:19:59 Message to Camera, serial 212300 queued 06:20:35 Received message from Master: op=PointingHead serial=212313 06:20:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:20:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:20:36 Point started: ret=0 06:20:36 point_skyscan result=0 06:20:37 Check angles 06:20:37 SkyScan query 06:20:37 SkyScan query done: ret=0 az=152.895<-10193 ze=-21.645<-13443 Statuses=0009 0009 06:20:37 Msec=0 True Az=152.895 Ze=-21.645 Az status=0009 Ze status=0009 06:20:37 Check angles 06:20:37 SkyScan query 06:20:38 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.615<-12041 Statuses=0009 0009 06:20:38 Msec=750 True Az=135.42 Ze=-0.615 Az status=0009 Ze status=0009 06:20:38 Check angles 06:20:38 SkyScan query 06:20:39 SkyScan query done: ret=0 az=117.78<-7852 ze=20.265<-10649 Statuses=0009 0009 06:20:39 Msec=1500 True Az=117.78 Ze=20.265 Az status=0009 Ze status=0009 06:20:39 Check angles 06:20:39 SkyScan query 06:20:39 SkyScan query done: ret=0 az=100.575<-6705 ze=41.295<-9247 Statuses=0009 0009 06:20:39 Msec=2250 True Az=100.575 Ze=41.295 Az status=0009 Ze status=0009 06:20:40 Check angles 06:20:40 SkyScan query 06:20:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.6<-8560 Statuses=0009 0008 06:20:40 Msec=3000 True Az=85.995 Ze=51.6 Az status=0009 Ze status=0008 06:20:40 Check angles 06:20:40 SkyScan query 06:20:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:20:41 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:20:41 Message to Master queued w/err=0: serial=212313 error=0 06:20:46 Received message from Master: op=Filter serial=212314 06:20:46 Color wheel filter change from 0 to 0 06:20:46 FLIGetFilterPos err=0 currentPosition=0 06:20:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:46 Filter is already there-color wheel unchanged 06:20:46 Received message from Master: op=Shutter serial=212315 06:20:46 Shutter LASER close 06:20:46 Received message from Camera: op=State serial=212317 06:20:46 GetSingleValue result=40 Value=cccccccc 06:20:46 SkyScan query 06:20:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:20:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:47 Parameters OK 06:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:47 Set A/D data flow result=40 06:20:47 Set A/D channel type result=40 06:20:47 Set A/D encoding result=40 06:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:47 Set channel filter=0.000000e+000 result=40 06:20:47 Config A/D Result=40 06:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:47 Get A/D filter: -9.255963e+061 result=40 06:20:47 Get A/D value=-858993460 result=40 06:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:47 Parameters OK 06:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:47 Set A/D data flow result=40 06:20:47 Set A/D channel type result=40 06:20:47 Set A/D encoding result=40 06:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:47 Set channel filter=0.000000e+000 result=40 06:20:47 Config A/D Result=40 06:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:47 Get A/D filter: -9.255963e+061 result=40 06:20:47 Get A/D value=-858993460 result=40 06:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:47 Aux= 06:20:47 Message to Camera, serial 212317 queued 06:21:24 Received message from Master: op=PointingHead serial=212330 06:21:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:21:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:21:24 Point started: ret=0 06:21:24 point_skyscan result=0 06:21:25 Check angles 06:21:25 SkyScan query 06:21:25 SkyScan query done: ret=0 az=85.995<-5733 ze=21.69<-10554 Statuses=0008 0009 06:21:25 Msec=0 True Az=85.995 Ze=21.69 Az status=0008 Ze status=0009 06:21:26 Check angles 06:21:26 SkyScan query 06:21:26 SkyScan query done: ret=0 az=85.995<-5733 ze=0.795<-11947 Statuses=0008 0009 06:21:26 Msec=750 True Az=85.995 Ze=0.795 Az status=0008 Ze status=0009 06:21:26 Check angles 06:21:26 SkyScan query 06:21:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.205<-13347 Statuses=0008 0009 06:21:27 Msec=1500 True Az=85.995 Ze=-20.205 Az status=0008 Ze status=0009 06:21:27 Check angles 06:21:27 SkyScan query 06:21:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.58<-14772 Statuses=0008 0009 06:21:28 Msec=2250 True Az=85.995 Ze=-41.58 Az status=0008 Ze status=0009 06:21:28 Check angles 06:21:28 SkyScan query 06:21:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:21:28 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:21:28 Message to Master queued w/err=0: serial=212330 error=0 06:21:33 Received message from Master: op=Filter serial=212331 06:21:33 Color wheel filter change from 0 to 0 06:21:33 FLIGetFilterPos err=0 currentPosition=0 06:21:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:33 Filter is already there-color wheel unchanged 06:21:34 Received message from Master: op=Shutter serial=212332 06:21:34 Shutter LASER close 06:21:34 Received message from Camera: op=State serial=212334 06:21:34 GetSingleValue result=40 Value=cccccccc 06:21:34 SkyScan query 06:21:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:21:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:34 Parameters OK 06:21:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:34 Set A/D data flow result=40 06:21:34 Set A/D channel type result=40 06:21:34 Set A/D encoding result=40 06:21:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:34 Set channel filter=0.000000e+000 result=40 06:21:34 Config A/D Result=40 06:21:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:34 Get A/D filter: -9.255963e+061 result=40 06:21:34 Get A/D value=-858993460 result=40 06:21:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:34 Parameters OK 06:21:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:34 Set A/D data flow result=40 06:21:34 Set A/D channel type result=40 06:21:34 Set A/D encoding result=40 06:21:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:34 Set channel filter=0.000000e+000 result=40 06:21:34 Config A/D Result=40 06:21:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:34 Get A/D filter: -9.255963e+061 result=40 06:21:34 Get A/D value=-858993460 result=40 06:21:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:34 Aux= 06:21:34 Message to Camera, serial 212334 queued 06:22:11 Received message from Master: op=PointingHead serial=212347 06:22:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:22:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:22:11 Point started: ret=0 06:22:11 point_skyscan result=0 06:22:12 Check angles 06:22:12 SkyScan query 06:22:13 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.54<-17436 Statuses=0009 0009 06:22:13 Msec=0 True Az=109.2 Ze=-81.54 Az status=0009 Ze status=0009 06:22:13 Check angles 06:22:13 SkyScan query 06:22:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.9<-18860 Statuses=0008 0009 06:22:13 Msec=750 True Az=112.995 Ze=-102.9 Az status=0008 Ze status=0009 06:22:14 Check angles 06:22:14 SkyScan query 06:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 06:22:14 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 06:22:14 Check angles 06:22:14 SkyScan query 06:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 06:22:15 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 06:22:15 Check angles 06:22:15 SkyScan query 06:22:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 06:22:16 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 06:22:16 Check angles 06:22:16 SkyScan query 06:22:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:22:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:22:16 Message to Master queued w/err=0: serial=212347 error=0 06:22:21 Received message from Master: op=Filter serial=212348 06:22:21 Color wheel filter change from 0 to 0 06:22:21 FLIGetFilterPos err=0 currentPosition=0 06:22:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:21 Filter is already there-color wheel unchanged 06:22:22 Received message from Master: op=Shutter serial=212349 06:22:22 Shutter LASER open 06:22:22 Received message from Camera: op=State serial=212351 06:22:22 GetSingleValue result=40 Value=cccccccc 06:22:22 SkyScan query 06:22:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:22:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:22 Parameters OK 06:22:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:22 Set A/D data flow result=40 06:22:22 Set A/D channel type result=40 06:22:22 Set A/D encoding result=40 06:22:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:22 Set channel filter=0.000000e+000 result=40 06:22:22 Config A/D Result=40 06:22:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:22 Get A/D filter: -9.255963e+061 result=40 06:22:22 Get A/D value=-858993460 result=40 06:22:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:22 Parameters OK 06:22:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:22 Set A/D data flow result=40 06:22:22 Set A/D channel type result=40 06:22:22 Set A/D encoding result=40 06:22:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:22 Set channel filter=0.000000e+000 result=40 06:22:22 Config A/D Result=40 06:22:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:22 Get A/D filter: -9.255963e+061 result=40 06:22:22 Get A/D value=-858993460 result=40 06:22:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:22 Aux= 06:22:22 Message to Camera, serial 212351 queued 06:22:31 Received message from Master: op=Shutter serial=212361 06:22:31 Shutter LASER close 06:22:31 Received message from Master: op=PointingHead serial=212365 06:22:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:22:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:22:32 Point started: ret=0 06:22:32 point_skyscan result=0 06:22:32 Check angles 06:22:32 SkyScan query 06:22:33 SkyScan query done: ret=0 az=89.52<-5968 ze=156.735<-1551 Statuses=0009 0009 06:22:33 Msec=0 True Az=89.52 Ze=156.735 Az status=0009 Ze status=0009 06:22:33 Check angles 06:22:33 SkyScan query 06:22:34 SkyScan query done: ret=0 az=72.015<-4801 ze=135.765<-2949 Statuses=0009 0009 06:22:34 Msec=750 True Az=72.015 Ze=135.765 Az status=0009 Ze status=0009 06:22:34 Check angles 06:22:34 SkyScan query 06:22:34 SkyScan query done: ret=0 az=54.735<-3649 ze=114.81<-4346 Statuses=0009 0009 06:22:34 Msec=1500 True Az=54.735 Ze=114.81 Az status=0009 Ze status=0009 06:22:35 Check angles 06:22:35 SkyScan query 06:22:35 SkyScan query done: ret=0 az=40.995<-2733 ze=93.42<-5772 Statuses=0009 0009 06:22:35 Msec=2250 True Az=40.995 Ze=93.42 Az status=0009 Ze status=0009 06:22:35 Check angles 06:22:35 SkyScan query 06:22:36 SkyScan query done: ret=0 az=40.995<-2733 ze=72.03<-7198 Statuses=0008 0009 06:22:36 Msec=3000 True Az=40.995 Ze=72.03 Az status=0008 Ze status=0009 06:22:36 Check angles 06:22:36 SkyScan query 06:22:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 06:22:37 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 06:22:37 Check angles 06:22:37 SkyScan query 06:22:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:22:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:22:37 Message to Master queued w/err=0: serial=212365 error=0 06:22:42 Received message from Master: op=Filter serial=212366 06:22:42 Color wheel filter change from 0 to 0 06:22:42 FLIGetFilterPos err=0 currentPosition=0 06:22:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:42 Filter is already there-color wheel unchanged 06:22:43 Received message from Master: op=Shutter serial=212367 06:22:43 Shutter LASER close 06:22:43 Received message from Camera: op=State serial=212369 06:22:43 GetSingleValue result=40 Value=cccccccc 06:22:43 SkyScan query 06:22:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:43 Parameters OK 06:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:43 Set A/D data flow result=40 06:22:43 Set A/D channel type result=40 06:22:43 Set A/D encoding result=40 06:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:43 Set channel filter=0.000000e+000 result=40 06:22:43 Config A/D Result=40 06:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:43 Get A/D filter: -9.255963e+061 result=40 06:22:43 Get A/D value=-858993460 result=40 06:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:43 Parameters OK 06:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:43 Set A/D data flow result=40 06:22:43 Set A/D channel type result=40 06:22:43 Set A/D encoding result=40 06:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:43 Set channel filter=0.000000e+000 result=40 06:22:43 Config A/D Result=40 06:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:43 Get A/D filter: -9.255963e+061 result=40 06:22:43 Get A/D value=-858993460 result=40 06:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:43 Aux= 06:22:43 Message to Camera, serial 212369 queued 06:23:21 Received message from Master: op=PointingHead serial=212382 06:23:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:23:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:23:21 Point started: ret=0 06:23:21 point_skyscan result=0 06:23:22 Check angles 06:23:22 SkyScan query 06:23:22 SkyScan query done: ret=0 az=64.2<-4280 ze=81.69<-6554 Statuses=0009 0009 06:23:22 Msec=0 True Az=64.2 Ze=81.69 Az status=0009 Ze status=0009 06:23:22 Check angles 06:23:22 SkyScan query 06:23:23 SkyScan query done: ret=0 az=81.69<-5446 ze=102.615<-5159 Statuses=0009 0009 06:23:23 Msec=750 True Az=81.69 Ze=102.615 Az status=0009 Ze status=0009 06:23:23 Check angles 06:23:23 SkyScan query 06:23:24 SkyScan query done: ret=0 az=99.315<-6621 ze=123.555<-3763 Statuses=0009 0009 06:23:24 Msec=1500 True Az=99.315 Ze=123.555 Az status=0009 Ze status=0009 06:23:24 Check angles 06:23:24 SkyScan query 06:23:25 SkyScan query done: ret=0 az=116.805<-7787 ze=144.51<-2366 Statuses=0009 0009 06:23:25 Msec=2250 True Az=116.805 Ze=144.51 Az status=0009 Ze status=0009 06:23:25 Check angles 06:23:25 SkyScan query 06:23:25 SkyScan query done: ret=0 az=131.07<-8738 ze=165.465<-969 Statuses=0009 0009 06:23:25 Msec=3000 True Az=131.07 Ze=165.465 Az status=0009 Ze status=0009 06:23:25 Check angles 06:23:25 SkyScan query 06:23:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.595<-23573 Statuses=0008 0009 06:23:26 Msec=3750 True Az=131.01 Ze=-173.595 Az status=0008 Ze status=0009 06:23:26 Check angles 06:23:26 SkyScan query 06:23:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.61<-22174 Statuses=0008 0009 06:23:27 Msec=4500 True Az=130.995 Ze=-152.61 Az status=0008 Ze status=0009 06:23:27 Check angles 06:23:27 SkyScan query 06:23:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:23:28 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:23:28 Message to Master queued w/err=0: serial=212382 error=0 06:23:33 Received message from Master: op=Filter serial=212383 06:23:33 Color wheel filter change from 0 to 0 06:23:33 FLIGetFilterPos err=0 currentPosition=0 06:23:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:33 Filter is already there-color wheel unchanged 06:23:33 Received message from Master: op=Shutter serial=212384 06:23:33 Shutter LASER close 06:23:33 Received message from Camera: op=State serial=212386 06:23:33 GetSingleValue result=40 Value=cccccccc 06:23:33 SkyScan query 06:23:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:23:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:33 Parameters OK 06:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:33 Set A/D data flow result=40 06:23:33 Set A/D channel type result=40 06:23:33 Set A/D encoding result=40 06:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:33 Set channel filter=0.000000e+000 result=40 06:23:33 Config A/D Result=40 06:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:33 Get A/D filter: -9.255963e+061 result=40 06:23:33 Get A/D value=-858993460 result=40 06:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:33 Parameters OK 06:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:33 Set A/D data flow result=40 06:23:33 Set A/D channel type result=40 06:23:33 Set A/D encoding result=40 06:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:33 Set channel filter=0.000000e+000 result=40 06:23:33 Config A/D Result=40 06:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:33 Get A/D filter: -9.255963e+061 result=40 06:23:33 Get A/D value=-858993460 result=40 06:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:33 Aux= 06:23:33 Message to Camera, serial 212386 queued 06:24:10 Received message from Master: op=PointingHead serial=212399 06:24:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:24:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:24:10 Point started: ret=0 06:24:10 point_skyscan result=0 06:24:11 Check angles 06:24:11 SkyScan query 06:24:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 06:24:12 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 06:24:12 Check angles 06:24:12 SkyScan query 06:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:24:13 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:24:13 Message to Master queued w/err=0: serial=212399 error=0 06:24:18 Received message from Master: op=Filter serial=212400 06:24:18 Color wheel filter change from 0 to 0 06:24:18 FLIGetFilterPos err=0 currentPosition=0 06:24:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:18 Filter is already there-color wheel unchanged 06:24:18 Received message from Master: op=Shutter serial=212401 06:24:18 Shutter LASER open 06:24:18 Received message from Camera: op=State serial=212403 06:24:18 GetSingleValue result=40 Value=cccccccc 06:24:18 SkyScan query 06:24:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:24:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:18 Parameters OK 06:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:18 Set A/D data flow result=40 06:24:18 Set A/D channel type result=40 06:24:18 Set A/D encoding result=40 06:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:18 Set channel filter=0.000000e+000 result=40 06:24:18 Config A/D Result=40 06:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:18 Get A/D filter: -9.255963e+061 result=40 06:24:18 Get A/D value=-858993460 result=40 06:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:18 Parameters OK 06:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:18 Set A/D data flow result=40 06:24:18 Set A/D channel type result=40 06:24:18 Set A/D encoding result=40 06:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:18 Set channel filter=0.000000e+000 result=40 06:24:18 Config A/D Result=40 06:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:18 Get A/D filter: -9.255963e+061 result=40 06:24:18 Get A/D value=-858993460 result=40 06:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:18 Aux= 06:24:18 Message to Camera, serial 212403 queued 06:24:27 Received message from Master: op=Shutter serial=212413 06:24:27 Shutter LASER close 06:24:27 Received message from Master: op=PointingHead serial=212417 06:24:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:24:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:24:28 Point started: ret=0 06:24:28 point_skyscan result=0 06:24:29 Check angles 06:24:29 SkyScan query 06:24:29 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.1<-21540 Statuses=0009 0009 06:24:29 Msec=0 True Az=136.155 Ze=-143.1 Az status=0009 Ze status=0009 06:24:29 Check angles 06:24:29 SkyScan query 06:24:30 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.115<-20141 Statuses=0009 0009 06:24:30 Msec=750 True Az=153.645 Ze=-122.115 Az status=0009 Ze status=0009 06:24:30 Check angles 06:24:30 SkyScan query 06:24:31 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.22<-18748 Statuses=0009 0009 06:24:31 Msec=1500 True Az=171.075 Ze=-101.22 Az status=0009 Ze status=0009 06:24:31 Check angles 06:24:31 SkyScan query 06:24:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.25<-17350 Statuses=0008 0009 06:24:31 Msec=2250 True Az=176.01 Ze=-80.25 Az status=0008 Ze status=0009 06:24:32 Check angles 06:24:32 SkyScan query 06:24:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.28<-15952 Statuses=0008 0009 06:24:32 Msec=3000 True Az=175.995 Ze=-59.28 Az status=0008 Ze status=0009 06:24:32 Check angles 06:24:32 SkyScan query 06:24:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 06:24:33 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 06:24:33 Message to Master queued w/err=0: serial=212417 error=0 06:24:38 Received message from Master: op=Filter serial=212418 06:24:38 Color wheel filter change from 0 to 0 06:24:38 FLIGetFilterPos err=0 currentPosition=0 06:24:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:38 Filter is already there-color wheel unchanged 06:24:38 Received message from Master: op=Shutter serial=212419 06:24:38 Shutter LASER close 06:24:38 Received message from Camera: op=State serial=212421 06:24:38 GetSingleValue result=40 Value=cccccccc 06:24:38 SkyScan query 06:24:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:24:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:39 Parameters OK 06:24:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:39 Set A/D data flow result=40 06:24:39 Set A/D channel type result=40 06:24:39 Set A/D encoding result=40 06:24:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:39 Set channel filter=0.000000e+000 result=40 06:24:39 Config A/D Result=40 06:24:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:39 Get A/D filter: -9.255963e+061 result=40 06:24:39 Get A/D value=-858993460 result=40 06:24:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:39 Parameters OK 06:24:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:39 Set A/D data flow result=40 06:24:39 Set A/D channel type result=40 06:24:39 Set A/D encoding result=40 06:24:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:39 Set channel filter=0.000000e+000 result=40 06:24:39 Config A/D Result=40 06:24:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:39 Get A/D filter: -9.255963e+061 result=40 06:24:39 Get A/D value=-858993460 result=40 06:24:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:39 Aux= 06:24:39 Message to Camera, serial 212421 queued 06:25:15 Received message from Master: op=PointingHead serial=212433 06:25:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:25:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:25:15 Point started: ret=0 06:25:15 point_skyscan result=0 06:25:16 Check angles 06:25:16 SkyScan query 06:25:16 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.54<-13436 Statuses=0009 0009 06:25:16 Msec=0 True Az=152.775 Ze=-21.54 Az status=0009 Ze status=0009 06:25:17 Check angles 06:25:17 SkyScan query 06:25:17 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.525<-12035 Statuses=0009 0009 06:25:17 Msec=750 True Az=135.375 Ze=-0.525 Az status=0009 Ze status=0009 [UTC 2018-12-17 06:25:17] 06:25:17 Check angles 06:25:17 SkyScan query 06:25:18 SkyScan query done: ret=0 az=116.43<-7762 ze=22.065<-10529 Statuses=0009 0009 06:25:18 Msec=1500 True Az=116.43 Ze=22.065 Az status=0009 Ze status=0009 06:25:18 Check angles 06:25:18 SkyScan query 06:25:19 SkyScan query done: ret=0 az=100.47<-6698 ze=41.385<-9241 Statuses=0009 0009 06:25:19 Msec=2250 True Az=100.47 Ze=41.385 Az status=0009 Ze status=0009 06:25:19 Check angles 06:25:19 SkyScan query 06:25:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.6<-8560 Statuses=0009 0008 06:25:19 Msec=3000 True Az=85.995 Ze=51.6 Az status=0009 Ze status=0008 06:25:20 Check angles 06:25:20 SkyScan query 06:25:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:25:20 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:25:20 Message to Master queued w/err=0: serial=212433 error=0 06:25:25 Received message from Master: op=Filter serial=212434 06:25:25 Color wheel filter change from 0 to 0 06:25:25 FLIGetFilterPos err=0 currentPosition=0 06:25:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:25 Filter is already there-color wheel unchanged 06:25:25 Received message from Master: op=Shutter serial=212435 06:25:25 Shutter LASER close 06:25:25 Received message from Camera: op=State serial=212437 06:25:25 GetSingleValue result=40 Value=cccccccc 06:25:25 SkyScan query 06:25:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:25:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:26 Parameters OK 06:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:26 Set A/D data flow result=40 06:25:26 Set A/D channel type result=40 06:25:26 Set A/D encoding result=40 06:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:26 Set channel filter=0.000000e+000 result=40 06:25:26 Config A/D Result=40 06:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:26 Get A/D filter: -9.255963e+061 result=40 06:25:26 Get A/D value=-858993460 result=40 06:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:26 Parameters OK 06:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:26 Set A/D data flow result=40 06:25:26 Set A/D channel type result=40 06:25:26 Set A/D encoding result=40 06:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:26 Set channel filter=0.000000e+000 result=40 06:25:26 Config A/D Result=40 06:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:26 Get A/D filter: -9.255963e+061 result=40 06:25:26 Get A/D value=-858993460 result=40 06:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:26 Aux= 06:25:26 Message to Camera, serial 212437 queued 06:26:03 Received message from Master: op=PointingHead serial=212450 06:26:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:26:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:26:03 Point started: ret=0 06:26:03 point_skyscan result=0 06:26:04 Check angles 06:26:04 SkyScan query 06:26:05 SkyScan query done: ret=0 az=85.995<-5733 ze=21.165<-10589 Statuses=0008 0009 06:26:05 Msec=0 True Az=85.995 Ze=21.165 Az status=0008 Ze status=0009 06:26:05 Check angles 06:26:05 SkyScan query 06:26:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-0.24<-12016 Statuses=0008 0009 06:26:05 Msec=750 True Az=85.995 Ze=-0.24 Az status=0008 Ze status=0009 06:26:06 Check angles 06:26:06 SkyScan query 06:26:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-21.15<-13410 Statuses=0008 0009 06:26:06 Msec=1500 True Az=85.995 Ze=-21.15 Az status=0008 Ze status=0009 06:26:06 Check angles 06:26:06 SkyScan query 06:26:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.165<-14811 Statuses=0008 0009 06:26:07 Msec=2250 True Az=85.995 Ze=-42.165 Az status=0008 Ze status=0009 06:26:07 Check angles 06:26:07 SkyScan query 06:26:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:26:08 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:26:08 Message to Master queued w/err=0: serial=212450 error=0 06:26:13 Received message from Master: op=Filter serial=212451 06:26:13 Color wheel filter change from 0 to 0 06:26:13 FLIGetFilterPos err=0 currentPosition=0 06:26:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:13 Filter is already there-color wheel unchanged 06:26:13 Received message from Master: op=Shutter serial=212452 06:26:13 Shutter LASER close 06:26:13 Received message from Camera: op=State serial=212454 06:26:13 GetSingleValue result=40 Value=cccccccc 06:26:13 SkyScan query 06:26:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:26:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:13 Parameters OK 06:26:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:13 Set A/D data flow result=40 06:26:13 Set A/D channel type result=40 06:26:13 Set A/D encoding result=40 06:26:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:13 Set channel filter=0.000000e+000 result=40 06:26:13 Config A/D Result=40 06:26:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:13 Get A/D filter: -9.255963e+061 result=40 06:26:13 Get A/D value=-858993460 result=40 06:26:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:13 Parameters OK 06:26:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:13 Set A/D data flow result=40 06:26:13 Set A/D channel type result=40 06:26:13 Set A/D encoding result=40 06:26:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:13 Set channel filter=0.000000e+000 result=40 06:26:13 Config A/D Result=40 06:26:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:13 Get A/D filter: -9.255963e+061 result=40 06:26:13 Get A/D value=-858993460 result=40 06:26:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:13 Aux= 06:26:13 Message to Camera, serial 212454 queued 06:26:50 Received message from Master: op=PointingHead serial=212467 06:26:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:26:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:26:51 Point started: ret=0 06:26:51 point_skyscan result=0 06:26:51 Check angles 06:26:51 SkyScan query 06:26:52 SkyScan query done: ret=0 az=108.75<-7250 ze=-81.03<-17402 Statuses=0009 0009 06:26:52 Msec=0 True Az=108.75 Ze=-81.03 Az status=0009 Ze status=0009 06:26:52 Check angles 06:26:52 SkyScan query 06:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 06:26:53 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 06:26:53 Check angles 06:26:53 SkyScan query 06:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.84<-20256 Statuses=0008 0009 06:26:53 Msec=1500 True Az=112.995 Ze=-123.84 Az status=0008 Ze status=0009 06:26:54 Check angles 06:26:54 SkyScan query 06:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 06:26:54 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 06:26:54 Check angles 06:26:54 SkyScan query 06:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 06:26:55 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 06:26:55 Check angles 06:26:55 SkyScan query 06:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:26:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:26:56 Message to Master queued w/err=0: serial=212467 error=0 06:27:01 Received message from Master: op=Filter serial=212468 06:27:01 Color wheel filter change from 0 to 0 06:27:01 FLIGetFilterPos err=0 currentPosition=0 06:27:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:01 Filter is already there-color wheel unchanged 06:27:01 Received message from Master: op=Shutter serial=212469 06:27:01 Shutter LASER open 06:27:01 Received message from Camera: op=State serial=212471 06:27:01 GetSingleValue result=40 Value=cccccccc 06:27:01 SkyScan query 06:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:27:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:02 Parameters OK 06:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:02 Set A/D data flow result=40 06:27:02 Set A/D channel type result=40 06:27:02 Set A/D encoding result=40 06:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:02 Set channel filter=0.000000e+000 result=40 06:27:02 Config A/D Result=40 06:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:02 Get A/D filter: -9.255963e+061 result=40 06:27:02 Get A/D value=-858993460 result=40 06:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:02 Parameters OK 06:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:02 Set A/D data flow result=40 06:27:02 Set A/D channel type result=40 06:27:02 Set A/D encoding result=40 06:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:02 Set channel filter=0.000000e+000 result=40 06:27:02 Config A/D Result=40 06:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:02 Get A/D filter: -9.255963e+061 result=40 06:27:02 Get A/D value=-858993460 result=40 06:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:02 Aux= 06:27:02 Message to Camera, serial 212471 queued 06:27:10 Received message from Master: op=Shutter serial=212481 06:27:10 Shutter LASER close 06:27:11 Received message from Master: op=PointingHead serial=212485 06:27:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:27:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:27:11 Point started: ret=0 06:27:11 point_skyscan result=0 06:27:12 Check angles 06:27:12 SkyScan query 06:27:12 SkyScan query done: ret=0 az=89.88<-5992 ze=157.29<-1514 Statuses=0009 0009 06:27:12 Msec=0 True Az=89.88 Ze=157.29 Az status=0009 Ze status=0009 06:27:12 Check angles 06:27:12 SkyScan query 06:27:13 SkyScan query done: ret=0 az=72.3<-4820 ze=136.335<-2911 Statuses=0009 0009 06:27:13 Msec=750 True Az=72.3 Ze=136.335 Az status=0009 Ze status=0009 06:27:13 Check angles 06:27:13 SkyScan query 06:27:14 SkyScan query done: ret=0 az=54.99<-3666 ze=115.41<-4306 Statuses=0009 0009 06:27:14 Msec=1500 True Az=54.99 Ze=115.41 Az status=0009 Ze status=0009 06:27:14 Check angles 06:27:14 SkyScan query 06:27:15 SkyScan query done: ret=0 az=40.89<-2726 ze=94.425<-5705 Statuses=0009 0009 06:27:15 Msec=2250 True Az=40.89 Ze=94.425 Az status=0009 Ze status=0009 06:27:15 Check angles 06:27:15 SkyScan query 06:27:15 SkyScan query done: ret=0 az=40.98<-2732 ze=73.485<-7101 Statuses=0008 0009 06:27:15 Msec=3000 True Az=40.98 Ze=73.485 Az status=0008 Ze status=0009 06:27:15 Check angles 06:27:15 SkyScan query 06:27:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.875<-8475 Statuses=0008 0009 06:27:16 Msec=3750 True Az=40.995 Ze=52.875 Az status=0008 Ze status=0009 06:27:16 Check angles 06:27:16 SkyScan query 06:27:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:27:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:27:17 Message to Master queued w/err=0: serial=212485 error=0 06:27:22 Received message from Master: op=Filter serial=212486 06:27:22 Color wheel filter change from 0 to 0 06:27:22 FLIGetFilterPos err=0 currentPosition=0 06:27:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:22 Filter is already there-color wheel unchanged 06:27:22 Received message from Master: op=Shutter serial=212487 06:27:22 Shutter LASER close 06:27:22 Received message from Camera: op=State serial=212489 06:27:22 GetSingleValue result=40 Value=cccccccc 06:27:22 SkyScan query 06:27:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:27:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:23 Parameters OK 06:27:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:23 Set A/D data flow result=40 06:27:23 Set A/D channel type result=40 06:27:23 Set A/D encoding result=40 06:27:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:23 Set channel filter=0.000000e+000 result=40 06:27:23 Config A/D Result=40 06:27:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:23 Get A/D filter: -9.255963e+061 result=40 06:27:23 Get A/D value=-858993460 result=40 06:27:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:23 Parameters OK 06:27:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:23 Set A/D data flow result=40 06:27:23 Set A/D channel type result=40 06:27:23 Set A/D encoding result=40 06:27:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:23 Set channel filter=0.000000e+000 result=40 06:27:23 Config A/D Result=40 06:27:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:23 Get A/D filter: -9.255963e+061 result=40 06:27:23 Get A/D value=-858993460 result=40 06:27:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:23 Aux= 06:27:23 Message to Camera, serial 212489 queued 06:28:00 Received message from Master: op=PointingHead serial=212502 06:28:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:28:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:28:00 Point started: ret=0 06:28:00 point_skyscan result=0 06:28:01 Check angles 06:28:01 SkyScan query 06:28:01 SkyScan query done: ret=0 az=63.735<-4249 ze=81.075<-6595 Statuses=0009 0009 06:28:01 Msec=0 True Az=63.735 Ze=81.075 Az status=0009 Ze status=0009 06:28:02 Check angles 06:28:02 SkyScan query 06:28:02 SkyScan query done: ret=0 az=81.15<-5410 ze=102.03<-5198 Statuses=0009 0009 06:28:02 Msec=750 True Az=81.15 Ze=102.03 Az status=0009 Ze status=0009 06:28:02 Check angles 06:28:02 SkyScan query 06:28:03 SkyScan query done: ret=0 az=98.97<-6598 ze=123.405<-3773 Statuses=0009 0009 06:28:03 Msec=1500 True Az=98.97 Ze=123.405 Az status=0009 Ze status=0009 06:28:03 Check angles 06:28:03 SkyScan query 06:28:04 SkyScan query done: ret=0 az=116.46<-7764 ze=144.36<-2376 Statuses=0009 0009 06:28:04 Msec=2250 True Az=116.46 Ze=144.36 Az status=0009 Ze status=0009 06:28:04 Check angles 06:28:04 SkyScan query 06:28:04 SkyScan query done: ret=0 az=131.025<-8735 ze=165.3<-980 Statuses=0009 0009 06:28:04 Msec=3000 True Az=131.025 Ze=165.3 Az status=0009 Ze status=0009 06:28:05 Check angles 06:28:05 SkyScan query 06:28:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.28<-23552 Statuses=0008 0009 06:28:05 Msec=3750 True Az=131.01 Ze=-173.28 Az status=0008 Ze status=0009 06:28:05 Check angles 06:28:05 SkyScan query 06:28:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-151.905<-22127 Statuses=0008 0009 06:28:06 Msec=4500 True Az=130.995 Ze=-151.905 Az status=0008 Ze status=0009 06:28:06 Check angles 06:28:06 SkyScan query 06:28:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0008 06:28:07 Msec=5250 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0008 06:28:07 Message to Master queued w/err=0: serial=212502 error=0 06:28:12 Received message from Master: op=Filter serial=212503 06:28:12 Color wheel filter change from 0 to 0 06:28:12 FLIGetFilterPos err=0 currentPosition=0 06:28:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:12 Filter is already there-color wheel unchanged 06:28:12 Received message from Master: op=Shutter serial=212504 06:28:12 Shutter LASER close 06:28:12 Received message from Camera: op=State serial=212506 06:28:12 GetSingleValue result=40 Value=cccccccc 06:28:12 SkyScan query 06:28:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 06:28:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:13 Parameters OK 06:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:13 Set A/D data flow result=40 06:28:13 Set A/D channel type result=40 06:28:13 Set A/D encoding result=40 06:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:13 Set channel filter=0.000000e+000 result=40 06:28:13 Config A/D Result=40 06:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:13 Get A/D filter: -9.255963e+061 result=40 06:28:13 Get A/D value=-858993460 result=40 06:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:13 Parameters OK 06:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:13 Set A/D data flow result=40 06:28:13 Set A/D channel type result=40 06:28:13 Set A/D encoding result=40 06:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:13 Set channel filter=0.000000e+000 result=40 06:28:13 Config A/D Result=40 06:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:13 Get A/D filter: -9.255963e+061 result=40 06:28:13 Get A/D value=-858993460 result=40 06:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.479996 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:13 Aux= 06:28:13 Message to Camera, serial 212506 queued 06:28:49 Received message from Master: op=PointingHead serial=212519 06:28:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:28:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:28:50 Point started: ret=0 06:28:50 point_skyscan result=0 06:28:50 Check angles 06:28:50 SkyScan query 06:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 06:28:51 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 06:28:51 Check angles 06:28:51 SkyScan query 06:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:28:52 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:28:52 Message to Master queued w/err=0: serial=212519 error=0 06:28:57 Received message from Master: op=Filter serial=212520 06:28:57 Color wheel filter change from 0 to 0 06:28:57 FLIGetFilterPos err=0 currentPosition=0 06:28:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:57 Filter is already there-color wheel unchanged 06:28:57 Received message from Master: op=Shutter serial=212521 06:28:57 Shutter LASER open 06:28:57 Received message from Camera: op=State serial=212523 06:28:57 GetSingleValue result=40 Value=cccccccc 06:28:57 SkyScan query 06:28:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:28:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:58 Parameters OK 06:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:58 Set A/D data flow result=40 06:28:58 Set A/D channel type result=40 06:28:58 Set A/D encoding result=40 06:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:58 Set channel filter=0.000000e+000 result=40 06:28:58 Config A/D Result=40 06:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:58 Get A/D filter: -9.255963e+061 result=40 06:28:58 Get A/D value=-858993460 result=40 06:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:58 Parameters OK 06:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:58 Set A/D data flow result=40 06:28:58 Set A/D channel type result=40 06:28:58 Set A/D encoding result=40 06:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:58 Set channel filter=0.000000e+000 result=40 06:28:58 Config A/D Result=40 06:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:58 Get A/D filter: -9.255963e+061 result=40 06:28:58 Get A/D value=-858993460 result=40 06:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:58 Aux= 06:28:58 Message to Camera, serial 212523 queued 06:29:06 Received message from Master: op=Shutter serial=212533 06:29:06 Shutter LASER close 06:29:07 Received message from Master: op=PointingHead serial=212537 06:29:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:29:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:29:07 Point started: ret=0 06:29:07 point_skyscan result=0 06:29:08 Check angles 06:29:08 SkyScan query 06:29:08 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.935<-21529 Statuses=0009 0009 06:29:08 Msec=0 True Az=136.38 Ze=-142.935 Az status=0009 Ze status=0009 06:29:09 Check angles 06:29:09 SkyScan query 06:29:09 SkyScan query done: ret=0 az=154.215<-10281 ze=-121.575<-20105 Statuses=0009 0009 06:29:09 Msec=750 True Az=154.215 Ze=-121.575 Az status=0009 Ze status=0009 06:29:09 Check angles 06:29:09 SkyScan query 06:29:10 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.53<-18702 Statuses=0009 0009 06:29:10 Msec=1500 True Az=171.63 Ze=-100.53 Az status=0009 Ze status=0009 06:29:10 Check angles 06:29:10 SkyScan query 06:29:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.65<-17310 Statuses=0008 0009 06:29:11 Msec=2250 True Az=176.01 Ze=-79.65 Az status=0008 Ze status=0009 06:29:11 Check angles 06:29:11 SkyScan query 06:29:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 06:29:11 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 06:29:12 Check angles 06:29:12 SkyScan query 06:29:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:29:12 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:29:12 Message to Master queued w/err=0: serial=212537 error=0 06:29:17 Received message from Master: op=Filter serial=212538 06:29:17 Color wheel filter change from 0 to 0 06:29:17 FLIGetFilterPos err=0 currentPosition=0 06:29:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:17 Filter is already there-color wheel unchanged 06:29:17 Received message from Master: op=Shutter serial=212539 06:29:17 Shutter LASER close 06:29:18 Received message from Camera: op=State serial=212541 06:29:18 GetSingleValue result=40 Value=cccccccc 06:29:18 SkyScan query 06:29:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:29:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:18 Parameters OK 06:29:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:18 Set A/D data flow result=40 06:29:18 Set A/D channel type result=40 06:29:18 Set A/D encoding result=40 06:29:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:18 Set channel filter=0.000000e+000 result=40 06:29:18 Config A/D Result=40 06:29:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:18 Get A/D filter: -9.255963e+061 result=40 06:29:18 Get A/D value=-858993460 result=40 06:29:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:18 Parameters OK 06:29:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:18 Set A/D data flow result=40 06:29:18 Set A/D channel type result=40 06:29:18 Set A/D encoding result=40 06:29:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:18 Set channel filter=0.000000e+000 result=40 06:29:18 Config A/D Result=40 06:29:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:18 Get A/D filter: -9.255963e+061 result=40 06:29:18 Get A/D value=-858993460 result=40 06:29:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:18 Aux= 06:29:18 Message to Camera, serial 212541 queued 06:29:55 Received message from Master: op=PointingHead serial=212554 06:29:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:29:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:29:55 Point started: ret=0 06:29:55 point_skyscan result=0 06:29:56 Check angles 06:29:56 SkyScan query 06:29:57 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.99<-13466 Statuses=0009 0009 06:29:57 Msec=0 True Az=153.165 Ze=-21.99 Az status=0009 Ze status=0009 06:29:57 Check angles 06:29:57 SkyScan query 06:29:57 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.525<-12035 Statuses=0009 0009 06:29:57 Msec=750 True Az=135.375 Ze=-0.525 Az status=0009 Ze status=0009 06:29:58 Check angles 06:29:58 SkyScan query 06:29:58 SkyScan query done: ret=0 az=117.795<-7853 ze=20.355<-10643 Statuses=0009 0009 06:29:58 Msec=1500 True Az=117.795 Ze=20.355 Az status=0009 Ze status=0009 06:29:58 Check angles 06:29:58 SkyScan query 06:29:59 SkyScan query done: ret=0 az=100.455<-6697 ze=41.37<-9242 Statuses=0009 0009 06:29:59 Msec=2250 True Az=100.455 Ze=41.37 Az status=0009 Ze status=0009 06:29:59 Check angles 06:29:59 SkyScan query 06:30:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.6<-8560 Statuses=0009 0008 06:30:00 Msec=3000 True Az=85.995 Ze=51.6 Az status=0009 Ze status=0008 06:30:00 Check angles 06:30:00 SkyScan query 06:30:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:30:00 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:30:00 Message to Master queued w/err=0: serial=212554 error=0 06:30:05 Received message from Master: op=Filter serial=212555 06:30:05 Color wheel filter change from 0 to 0 06:30:05 FLIGetFilterPos err=0 currentPosition=0 06:30:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:05 Filter is already there-color wheel unchanged 06:30:06 Received message from Master: op=Shutter serial=212556 06:30:06 Shutter LASER close 06:30:06 Received message from Camera: op=State serial=212558 06:30:06 GetSingleValue result=40 Value=cccccccc 06:30:06 SkyScan query 06:30:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:30:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:06 Parameters OK 06:30:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:06 Set A/D data flow result=40 06:30:06 Set A/D channel type result=40 06:30:06 Set A/D encoding result=40 06:30:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:06 Set channel filter=0.000000e+000 result=40 06:30:06 Config A/D Result=40 06:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:06 Get A/D filter: -9.255963e+061 result=40 06:30:06 Get A/D value=-858993460 result=40 06:30:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:06 Parameters OK 06:30:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:06 Set A/D data flow result=40 06:30:06 Set A/D channel type result=40 06:30:06 Set A/D encoding result=40 06:30:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:06 Set channel filter=0.000000e+000 result=40 06:30:06 Config A/D Result=40 06:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:06 Get A/D filter: -9.255963e+061 result=40 06:30:06 Get A/D value=-858993460 result=40 06:30:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:06 Aux= 06:30:06 Message to Camera, serial 212558 queued 06:30:43 Received message from Master: op=PointingHead serial=212571 06:30:43 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:30:43 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:30:43 Point started: ret=0 06:30:43 point_skyscan result=0 06:30:44 Check angles 06:30:44 SkyScan query 06:30:45 SkyScan query done: ret=0 az=85.995<-5733 ze=21.315<-10579 Statuses=0008 0009 06:30:45 Msec=0 True Az=85.995 Ze=21.315 Az status=0008 Ze status=0009 06:30:45 Check angles 06:30:45 SkyScan query 06:30:46 SkyScan query done: ret=0 az=86.01<-5734 ze=0.39<-11974 Statuses=0008 0009 06:30:46 Msec=750 True Az=86.01 Ze=0.39 Az status=0008 Ze status=0009 06:30:46 Check angles 06:30:46 SkyScan query 06:30:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.595<-13373 Statuses=0008 0009 06:30:46 Msec=1500 True Az=85.995 Ze=-20.595 Az status=0008 Ze status=0009 06:30:47 Check angles 06:30:47 SkyScan query 06:30:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-42<-14800 Statuses=0008 0009 06:30:47 Msec=2250 True Az=85.995 Ze=-42 Az status=0008 Ze status=0009 06:30:47 Check angles 06:30:47 SkyScan query 06:30:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:30:48 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:30:48 Message to Master queued w/err=0: serial=212571 error=0 06:30:53 Received message from Master: op=Filter serial=212572 06:30:53 Color wheel filter change from 0 to 0 06:30:53 FLIGetFilterPos err=0 currentPosition=0 06:30:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:53 Filter is already there-color wheel unchanged 06:30:53 Received message from Master: op=Shutter serial=212573 06:30:53 Shutter LASER close 06:30:53 Received message from Camera: op=State serial=212575 06:30:53 GetSingleValue result=40 Value=cccccccc 06:30:53 SkyScan query 06:30:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:30:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:54 Parameters OK 06:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:54 Set A/D data flow result=40 06:30:54 Set A/D channel type result=40 06:30:54 Set A/D encoding result=40 06:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:54 Set channel filter=0.000000e+000 result=40 06:30:54 Config A/D Result=40 06:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:54 Get A/D filter: -9.255963e+061 result=40 06:30:54 Get A/D value=-858993460 result=40 06:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:54 Parameters OK 06:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:54 Set A/D data flow result=40 06:30:54 Set A/D channel type result=40 06:30:54 Set A/D encoding result=40 06:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:54 Set channel filter=0.000000e+000 result=40 06:30:54 Config A/D Result=40 06:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:54 Get A/D filter: -9.255963e+061 result=40 06:30:54 Get A/D value=-858993460 result=40 06:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:54 Aux= 06:30:54 Message to Camera, serial 212575 queued 06:31:31 Received message from Master: op=PointingHead serial=212588 06:31:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:31:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:31:31 Point started: ret=0 06:31:31 point_skyscan result=0 06:31:32 Check angles 06:31:32 SkyScan query 06:31:32 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.585<-17439 Statuses=0009 0009 06:31:32 Msec=0 True Az=109.215 Ze=-81.585 Az status=0009 Ze status=0009 06:31:32 Check angles 06:31:32 SkyScan query 06:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 06:31:33 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 06:31:33 Check angles 06:31:33 SkyScan query 06:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 06:31:34 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 06:31:34 Check angles 06:31:34 SkyScan query 06:31:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.855<-21657 Statuses=0008 0009 06:31:35 Msec=2250 True Az=112.995 Ze=-144.855 Az status=0008 Ze status=0009 06:31:35 Check angles 06:31:35 SkyScan query 06:31:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.81<-23054 Statuses=0008 0009 06:31:35 Msec=3000 True Az=112.995 Ze=-165.81 Az status=0008 Ze status=0009 06:31:35 Check angles 06:31:35 SkyScan query 06:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:31:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:31:36 Message to Master queued w/err=0: serial=212588 error=0 06:31:41 Received message from Master: op=Filter serial=212589 06:31:41 Color wheel filter change from 0 to 0 06:31:41 FLIGetFilterPos err=0 currentPosition=0 06:31:41 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:41 Filter is already there-color wheel unchanged 06:31:41 Received message from Master: op=Shutter serial=212590 06:31:41 Shutter LASER open 06:31:41 Received message from Camera: op=State serial=212592 06:31:41 GetSingleValue result=40 Value=cccccccc 06:31:41 SkyScan query 06:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:31:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:42 Parameters OK 06:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:42 Set A/D data flow result=40 06:31:42 Set A/D channel type result=40 06:31:42 Set A/D encoding result=40 06:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:42 Set channel filter=0.000000e+000 result=40 06:31:42 Config A/D Result=40 06:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:42 Get A/D filter: -9.255963e+061 result=40 06:31:42 Get A/D value=-858993460 result=40 06:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:42 Parameters OK 06:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:42 Set A/D data flow result=40 06:31:42 Set A/D channel type result=40 06:31:42 Set A/D encoding result=40 06:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:42 Set channel filter=0.000000e+000 result=40 06:31:42 Config A/D Result=40 06:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:42 Get A/D filter: -9.255963e+061 result=40 06:31:42 Get A/D value=-858993460 result=40 06:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:42 Aux= 06:31:42 Message to Camera, serial 212592 queued 06:31:50 Received message from Master: op=Shutter serial=212602 06:31:50 Shutter LASER close 06:31:51 Received message from Master: op=PointingHead serial=212606 06:31:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:31:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:31:51 Point started: ret=0 06:31:51 point_skyscan result=0 06:31:52 Check angles 06:31:52 SkyScan query 06:31:52 SkyScan query done: ret=0 az=90.165<-6011 ze=157.485<-1501 Statuses=0009 0009 06:31:52 Msec=0 True Az=90.165 Ze=157.485 Az status=0009 Ze status=0009 06:31:53 Check angles 06:31:53 SkyScan query 06:31:53 SkyScan query done: ret=0 az=72.69<-4846 ze=136.545<-2897 Statuses=0009 0009 06:31:53 Msec=750 True Az=72.69 Ze=136.545 Az status=0009 Ze status=0009 06:31:53 Check angles 06:31:53 SkyScan query 06:31:54 SkyScan query done: ret=0 az=55.185<-3679 ze=115.635<-4291 Statuses=0009 0009 06:31:54 Msec=1500 True Az=55.185 Ze=115.635 Az status=0009 Ze status=0009 06:31:54 Check angles 06:31:54 SkyScan query 06:31:55 SkyScan query done: ret=0 az=40.935<-2729 ze=94.65<-5690 Statuses=0009 0009 06:31:55 Msec=2250 True Az=40.935 Ze=94.65 Az status=0009 Ze status=0009 06:31:55 Check angles 06:31:55 SkyScan query 06:31:55 SkyScan query done: ret=0 az=40.995<-2733 ze=73.71<-7086 Statuses=0008 0009 06:31:55 Msec=3000 True Az=40.995 Ze=73.71 Az status=0008 Ze status=0009 06:31:56 Check angles 06:31:56 SkyScan query 06:31:56 SkyScan query done: ret=0 az=40.995<-2733 ze=53.025<-8465 Statuses=0008 0009 06:31:56 Msec=3750 True Az=40.995 Ze=53.025 Az status=0008 Ze status=0009 06:31:56 Check angles 06:31:56 SkyScan query 06:31:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:31:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:31:57 Message to Master queued w/err=0: serial=212606 error=0 06:32:02 Received message from Master: op=Filter serial=212607 06:32:02 Color wheel filter change from 0 to 0 06:32:02 FLIGetFilterPos err=0 currentPosition=0 06:32:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:02 Filter is already there-color wheel unchanged 06:32:02 Received message from Master: op=Shutter serial=212608 06:32:02 Shutter LASER close 06:32:02 Received message from Camera: op=State serial=212610 06:32:02 GetSingleValue result=40 Value=cccccccc 06:32:02 SkyScan query 06:32:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:32:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:03 Parameters OK 06:32:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:03 Set A/D data flow result=40 06:32:03 Set A/D channel type result=40 06:32:03 Set A/D encoding result=40 06:32:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:03 Set channel filter=0.000000e+000 result=40 06:32:03 Config A/D Result=40 06:32:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:03 Get A/D filter: -9.255963e+061 result=40 06:32:03 Get A/D value=-858993460 result=40 06:32:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:03 Parameters OK 06:32:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:03 Set A/D data flow result=40 06:32:03 Set A/D channel type result=40 06:32:03 Set A/D encoding result=40 06:32:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:03 Set channel filter=0.000000e+000 result=40 06:32:03 Config A/D Result=40 06:32:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:03 Get A/D filter: -9.255963e+061 result=40 06:32:03 Get A/D value=-858993460 result=40 06:32:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:03 Aux= 06:32:03 Message to Camera, serial 212610 queued 06:32:40 Received message from Master: op=PointingHead serial=212623 06:32:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:32:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:32:40 Point started: ret=0 06:32:40 point_skyscan result=0 06:32:41 Check angles 06:32:41 SkyScan query 06:32:42 SkyScan query done: ret=0 az=64.35<-4290 ze=81.765<-6549 Statuses=0009 0009 06:32:42 Msec=0 True Az=64.35 Ze=81.765 Az status=0009 Ze status=0009 06:32:42 Check angles 06:32:42 SkyScan query 06:32:42 SkyScan query done: ret=0 az=81.84<-5456 ze=102.675<-5155 Statuses=0009 0009 06:32:42 Msec=750 True Az=81.84 Ze=102.675 Az status=0009 Ze status=0009 06:32:43 Check angles 06:32:43 SkyScan query 06:32:43 SkyScan query done: ret=0 az=99.345<-6623 ze=123.63<-3758 Statuses=0009 0009 06:32:43 Msec=1500 True Az=99.345 Ze=123.63 Az status=0009 Ze status=0009 06:32:43 Check angles 06:32:43 SkyScan query 06:32:44 SkyScan query done: ret=0 az=116.775<-7785 ze=144.57<-2362 Statuses=0009 0009 06:32:44 Msec=2250 True Az=116.775 Ze=144.57 Az status=0009 Ze status=0009 06:32:44 Check angles 06:32:44 SkyScan query 06:32:45 SkyScan query done: ret=0 az=131.055<-8737 ze=165.525<-965 Statuses=0009 0009 06:32:45 Msec=3000 True Az=131.055 Ze=165.525 Az status=0009 Ze status=0009 06:32:45 Check angles 06:32:45 SkyScan query 06:32:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-173.52<-23568 Statuses=0008 0009 06:32:45 Msec=3750 True Az=131.01 Ze=-173.52 Az status=0008 Ze status=0009 06:32:46 Check angles 06:32:46 SkyScan query 06:32:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-152.535<-22169 Statuses=0008 0009 06:32:46 Msec=4500 True Az=130.995 Ze=-152.535 Az status=0008 Ze status=0009 06:32:46 Check angles 06:32:46 SkyScan query 06:32:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.435<-21429 Statuses=0008 0008 06:32:47 Msec=5250 True Az=130.995 Ze=-141.435 Az status=0008 Ze status=0008 06:32:47 Message to Master queued w/err=0: serial=212623 error=0 06:32:52 Received message from Master: op=Filter serial=212624 06:32:52 Color wheel filter change from 0 to 0 06:32:52 FLIGetFilterPos err=0 currentPosition=0 06:32:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:52 Filter is already there-color wheel unchanged 06:32:52 Received message from Master: op=Shutter serial=212625 06:32:52 Shutter LASER close 06:32:52 Received message from Camera: op=State serial=212627 06:32:52 GetSingleValue result=40 Value=cccccccc 06:32:52 SkyScan query 06:32:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:32:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:53 Parameters OK 06:32:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:53 Set A/D data flow result=40 06:32:53 Set A/D channel type result=40 06:32:53 Set A/D encoding result=40 06:32:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:53 Set channel filter=0.000000e+000 result=40 06:32:53 Config A/D Result=40 06:32:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:53 Get A/D filter: -9.255963e+061 result=40 06:32:53 Get A/D value=-858993460 result=40 06:32:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:53 Parameters OK 06:32:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:53 Set A/D data flow result=40 06:32:53 Set A/D channel type result=40 06:32:53 Set A/D encoding result=40 06:32:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:53 Set channel filter=0.000000e+000 result=40 06:32:53 Config A/D Result=40 06:32:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:53 Get A/D filter: -9.255963e+061 result=40 06:32:53 Get A/D value=-858993460 result=40 06:32:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:53 Aux= 06:32:53 Message to Camera, serial 212627 queued 06:33:30 Received message from Master: op=PointingHead serial=212640 06:33:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:33:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:33:30 Point started: ret=0 06:33:30 point_skyscan result=0 06:33:31 Check angles 06:33:31 SkyScan query 06:33:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 06:33:31 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 06:33:31 Check angles 06:33:31 SkyScan query 06:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:33:32 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:33:32 Message to Master queued w/err=0: serial=212640 error=0 06:33:37 Received message from Master: op=Filter serial=212641 06:33:37 Color wheel filter change from 0 to 0 06:33:37 FLIGetFilterPos err=0 currentPosition=0 06:33:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:37 Filter is already there-color wheel unchanged 06:33:37 Received message from Master: op=Shutter serial=212642 06:33:37 Shutter LASER open 06:33:37 Received message from Camera: op=State serial=212644 06:33:37 GetSingleValue result=40 Value=cccccccc 06:33:37 SkyScan query 06:33:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:33:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:38 Parameters OK 06:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:38 Set A/D data flow result=40 06:33:38 Set A/D channel type result=40 06:33:38 Set A/D encoding result=40 06:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:38 Set channel filter=0.000000e+000 result=40 06:33:38 Config A/D Result=40 06:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:38 Get A/D filter: -9.255963e+061 result=40 06:33:38 Get A/D value=-858993460 result=40 06:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:38 Parameters OK 06:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:38 Set A/D data flow result=40 06:33:38 Set A/D channel type result=40 06:33:38 Set A/D encoding result=40 06:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:38 Set channel filter=0.000000e+000 result=40 06:33:38 Config A/D Result=40 06:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:38 Get A/D filter: -9.255963e+061 result=40 06:33:38 Get A/D value=-858993460 result=40 06:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:38 Aux= 06:33:38 Message to Camera, serial 212644 queued 06:33:46 Received message from Master: op=Shutter serial=212654 06:33:46 Shutter LASER close 06:33:47 Received message from Master: op=PointingHead serial=212658 06:33:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:33:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:33:47 Point started: ret=0 06:33:47 point_skyscan result=0 06:33:48 Check angles 06:33:48 SkyScan query 06:33:49 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.445<-21563 Statuses=0009 0009 06:33:49 Msec=0 True Az=135.81 Ze=-143.445 Az status=0009 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:49 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.505<-20167 Statuses=0009 0009 06:33:49 Msec=750 True Az=153.3 Ze=-122.505 Az status=0009 Ze status=0009 06:33:50 Check angles 06:33:50 SkyScan query 06:33:50 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.055<-18737 Statuses=0009 0009 06:33:50 Msec=1500 True Az=171.195 Ze=-101.055 Az status=0009 Ze status=0009 06:33:50 Check angles 06:33:50 SkyScan query 06:33:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 06:33:51 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 06:33:51 Check angles 06:33:51 SkyScan query 06:33:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.71<-15914 Statuses=0008 0009 06:33:52 Msec=3000 True Az=176.01 Ze=-58.71 Az status=0008 Ze status=0009 06:33:52 Check angles 06:33:52 SkyScan query 06:33:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:33:52 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:33:52 Message to Master queued w/err=0: serial=212658 error=0 06:33:57 Received message from Master: op=Filter serial=212659 06:33:57 Color wheel filter change from 0 to 0 06:33:57 FLIGetFilterPos err=0 currentPosition=0 06:33:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:57 Filter is already there-color wheel unchanged 06:33:58 Received message from Master: op=Shutter serial=212660 06:33:58 Shutter LASER close 06:33:58 Received message from Camera: op=State serial=212662 06:33:58 GetSingleValue result=40 Value=cccccccc 06:33:58 SkyScan query 06:33:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:33:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:58 Parameters OK 06:33:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:58 Set A/D data flow result=40 06:33:58 Set A/D channel type result=40 06:33:58 Set A/D encoding result=40 06:33:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:58 Set channel filter=0.000000e+000 result=40 06:33:58 Config A/D Result=40 06:33:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:58 Get A/D filter: -9.255963e+061 result=40 06:33:58 Get A/D value=-858993460 result=40 06:33:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:58 Parameters OK 06:33:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:58 Set A/D data flow result=40 06:33:58 Set A/D channel type result=40 06:33:58 Set A/D encoding result=40 06:33:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:58 Set channel filter=0.000000e+000 result=40 06:33:58 Config A/D Result=40 06:33:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:58 Get A/D filter: -9.255963e+061 result=40 06:33:58 Get A/D value=-858993460 result=40 06:33:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:58 Aux= 06:33:58 Message to Camera, serial 212662 queued 06:34:35 Received message from Master: op=PointingHead serial=212675 06:34:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:34:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:34:35 Point started: ret=0 06:34:35 point_skyscan result=0 06:34:36 Check angles 06:34:36 SkyScan query 06:34:37 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.035<-13469 Statuses=0009 0009 06:34:37 Msec=0 True Az=153.195 Ze=-22.035 Az status=0009 Ze status=0009 06:34:37 Check angles 06:34:37 SkyScan query 06:34:38 SkyScan query done: ret=0 az=135.885<-9059 ze=-1.08<-12072 Statuses=0009 0009 06:34:38 Msec=750 True Az=135.885 Ze=-1.08 Az status=0009 Ze status=0009 06:34:38 Check angles 06:34:38 SkyScan query 06:34:38 SkyScan query done: ret=0 az=118.275<-7885 ze=19.845<-10677 Statuses=0009 0009 06:34:38 Msec=1500 True Az=118.275 Ze=19.845 Az status=0009 Ze status=0009 06:34:38 Check angles 06:34:38 SkyScan query 06:34:39 SkyScan query done: ret=0 az=100.89<-6726 ze=40.845<-9277 Statuses=0009 0009 06:34:39 Msec=2250 True Az=100.89 Ze=40.845 Az status=0009 Ze status=0009 06:34:39 Check angles 06:34:39 SkyScan query 06:34:40 SkyScan query done: ret=0 az=85.98<-5732 ze=51.6<-8560 Statuses=0009 0008 06:34:40 Msec=3000 True Az=85.98 Ze=51.6 Az status=0009 Ze status=0008 06:34:40 Check angles [UTC 2018-12-17 06:34:40] 06:34:40 SkyScan query 06:34:41 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 06:34:41 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 06:34:41 Message to Master queued w/err=0: serial=212675 error=0 06:34:46 Received message from Master: op=Filter serial=212676 06:34:46 Color wheel filter change from 0 to 0 06:34:46 FLIGetFilterPos err=0 currentPosition=0 06:34:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:46 Filter is already there-color wheel unchanged 06:34:46 Received message from Master: op=Shutter serial=212677 06:34:46 Shutter LASER close 06:34:46 Received message from Camera: op=State serial=212679 06:34:46 GetSingleValue result=40 Value=cccccccc 06:34:46 SkyScan query 06:34:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:34:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:46 Parameters OK 06:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:46 Set A/D data flow result=40 06:34:46 Set A/D channel type result=40 06:34:46 Set A/D encoding result=40 06:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:46 Set channel filter=0.000000e+000 result=40 06:34:46 Config A/D Result=40 06:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:46 Get A/D filter: -9.255963e+061 result=40 06:34:46 Get A/D value=-858993460 result=40 06:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:46 Parameters OK 06:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:46 Set A/D data flow result=40 06:34:46 Set A/D channel type result=40 06:34:46 Set A/D encoding result=40 06:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:46 Set channel filter=0.000000e+000 result=40 06:34:46 Config A/D Result=40 06:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:46 Get A/D filter: -9.255963e+061 result=40 06:34:46 Get A/D value=-858993460 result=40 06:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:46 Aux= 06:34:46 Message to Camera, serial 212679 queued 06:35:23 Received message from Master: op=PointingHead serial=212692 06:35:23 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:35:23 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:35:24 Point started: ret=0 06:35:24 point_skyscan result=0 06:35:25 Check angles 06:35:25 SkyScan query 06:35:25 SkyScan query done: ret=0 az=85.995<-5733 ze=21.795<-10547 Statuses=0008 0009 06:35:25 Msec=0 True Az=85.995 Ze=21.795 Az status=0008 Ze status=0009 06:35:25 Check angles 06:35:25 SkyScan query 06:35:26 SkyScan query done: ret=0 az=85.995<-5733 ze=0.885<-11941 Statuses=0008 0009 06:35:26 Msec=750 True Az=85.995 Ze=0.885 Az status=0008 Ze status=0009 06:35:26 Check angles 06:35:26 SkyScan query 06:35:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.1<-13340 Statuses=0008 0009 06:35:27 Msec=1500 True Az=85.995 Ze=-20.1 Az status=0008 Ze status=0009 06:35:27 Check angles 06:35:27 SkyScan query 06:35:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.01<-14734 Statuses=0008 0009 06:35:27 Msec=2250 True Az=85.995 Ze=-41.01 Az status=0008 Ze status=0009 06:35:28 Check angles 06:35:28 SkyScan query 06:35:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:35:28 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:35:28 Message to Master queued w/err=0: serial=212692 error=0 06:35:33 Received message from Master: op=Filter serial=212693 06:35:33 Color wheel filter change from 0 to 0 06:35:33 FLIGetFilterPos err=0 currentPosition=0 06:35:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:33 Filter is already there-color wheel unchanged 06:35:33 Received message from Master: op=Shutter serial=212694 06:35:33 Shutter LASER close 06:35:33 Received message from Camera: op=State serial=212696 06:35:33 GetSingleValue result=40 Value=cccccccc 06:35:33 SkyScan query 06:35:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:35:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:34 Parameters OK 06:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:34 Set A/D data flow result=40 06:35:34 Set A/D channel type result=40 06:35:34 Set A/D encoding result=40 06:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:34 Set channel filter=0.000000e+000 result=40 06:35:34 Config A/D Result=40 06:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:34 Get A/D filter: -9.255963e+061 result=40 06:35:34 Get A/D value=-858993460 result=40 06:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:34 Parameters OK 06:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:34 Set A/D data flow result=40 06:35:34 Set A/D channel type result=40 06:35:34 Set A/D encoding result=40 06:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:34 Set channel filter=0.000000e+000 result=40 06:35:34 Config A/D Result=40 06:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:34 Get A/D filter: -9.255963e+061 result=40 06:35:34 Get A/D value=-858993460 result=40 06:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:34 Aux= 06:35:34 Message to Camera, serial 212696 queued [UTC 2018-12-17 06:35:52] 06:36:11 Received message from Master: op=PointingHead serial=212709 06:36:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:36:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:36:11 Point started: ret=0 06:36:11 point_skyscan result=0 06:36:12 Check angles 06:36:12 SkyScan query 06:36:12 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.27<-17418 Statuses=0009 0009 06:36:12 Msec=0 True Az=109.14 Ze=-81.27 Az status=0009 Ze status=0009 06:36:13 Check angles 06:36:13 SkyScan query 06:36:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 06:36:13 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 06:36:13 Check angles 06:36:13 SkyScan query 06:36:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 06:36:14 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 06:36:14 Check angles 06:36:14 SkyScan query 06:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 06:36:15 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 06:36:15 Check angles 06:36:15 SkyScan query 06:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 06:36:15 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 06:36:16 Check angles 06:36:16 SkyScan query 06:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:36:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:36:16 Message to Master queued w/err=0: serial=212709 error=0 06:36:21 Received message from Master: op=Filter serial=212710 06:36:21 Color wheel filter change from 0 to 0 06:36:21 FLIGetFilterPos err=0 currentPosition=0 06:36:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:21 Filter is already there-color wheel unchanged 06:36:21 Received message from Master: op=Shutter serial=212711 06:36:21 Shutter LASER open 06:36:22 Received message from Camera: op=State serial=212713 06:36:22 GetSingleValue result=40 Value=cccccccc 06:36:22 SkyScan query 06:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:36:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:22 Parameters OK 06:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:22 Set A/D data flow result=40 06:36:22 Set A/D channel type result=40 06:36:22 Set A/D encoding result=40 06:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:22 Set channel filter=0.000000e+000 result=40 06:36:22 Config A/D Result=40 06:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:22 Get A/D filter: -9.255963e+061 result=40 06:36:22 Get A/D value=-858993460 result=40 06:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:22 Parameters OK 06:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:22 Set A/D data flow result=40 06:36:22 Set A/D channel type result=40 06:36:22 Set A/D encoding result=40 06:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:22 Set channel filter=0.000000e+000 result=40 06:36:22 Config A/D Result=40 06:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:22 Get A/D filter: -9.255963e+061 result=40 06:36:22 Get A/D value=-858993460 result=40 06:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:22 Aux= 06:36:22 Message to Camera, serial 212713 queued 06:36:31 Received message from Master: op=Shutter serial=212723 06:36:31 Shutter LASER close 06:36:31 Received message from Master: op=PointingHead serial=212727 06:36:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:36:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:36:31 Point started: ret=0 06:36:31 point_skyscan result=0 06:36:32 Check angles 06:36:32 SkyScan query 06:36:33 SkyScan query done: ret=0 az=89.655<-5977 ze=157.005<-1533 Statuses=0009 0009 06:36:33 Msec=0 True Az=89.655 Ze=157.005 Az status=0009 Ze status=0009 06:36:33 Check angles 06:36:33 SkyScan query 06:36:33 SkyScan query done: ret=0 az=72.225<-4815 ze=136.05<-2930 Statuses=0009 0009 06:36:33 Msec=750 True Az=72.225 Ze=136.05 Az status=0009 Ze status=0009 06:36:34 Check angles 06:36:34 SkyScan query 06:36:34 SkyScan query done: ret=0 az=54.9<-3660 ze=115.125<-4325 Statuses=0009 0009 06:36:34 Msec=1500 True Az=54.9 Ze=115.125 Az status=0009 Ze status=0009 06:36:34 Check angles 06:36:34 SkyScan query 06:36:35 SkyScan query done: ret=0 az=40.95<-2730 ze=94.125<-5725 Statuses=0009 0009 06:36:35 Msec=2250 True Az=40.95 Ze=94.125 Az status=0009 Ze status=0009 06:36:35 Check angles 06:36:35 SkyScan query 06:36:36 SkyScan query done: ret=0 az=40.995<-2733 ze=72.705<-7153 Statuses=0008 0009 06:36:36 Msec=3000 True Az=40.995 Ze=72.705 Az status=0008 Ze status=0009 06:36:36 Check angles 06:36:36 SkyScan query 06:36:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 06:36:36 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 06:36:37 Check angles 06:36:37 SkyScan query 06:36:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:36:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:36:37 Message to Master queued w/err=0: serial=212727 error=0 06:36:42 Received message from Master: op=Filter serial=212728 06:36:42 Color wheel filter change from 0 to 0 06:36:42 FLIGetFilterPos err=0 currentPosition=0 06:36:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:42 Filter is already there-color wheel unchanged 06:36:42 Received message from Master: op=Shutter serial=212729 06:36:42 Shutter LASER close 06:36:43 Received message from Camera: op=State serial=212731 06:36:43 GetSingleValue result=40 Value=cccccccc 06:36:43 SkyScan query 06:36:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:36:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:43 Parameters OK 06:36:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:43 Set A/D data flow result=40 06:36:43 Set A/D channel type result=40 06:36:43 Set A/D encoding result=40 06:36:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:43 Set channel filter=0.000000e+000 result=40 06:36:43 Config A/D Result=40 06:36:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:43 Get A/D filter: -9.255963e+061 result=40 06:36:43 Get A/D value=-858993460 result=40 06:36:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:43 Parameters OK 06:36:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:43 Set A/D data flow result=40 06:36:43 Set A/D channel type result=40 06:36:43 Set A/D encoding result=40 06:36:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:43 Set channel filter=0.000000e+000 result=40 06:36:43 Config A/D Result=40 06:36:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:43 Get A/D filter: -9.255963e+061 result=40 06:36:43 Get A/D value=-858993460 result=40 06:36:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:43 Aux= 06:36:43 Message to Camera, serial 212731 queued 06:37:20 Received message from Master: op=PointingHead serial=212744 06:37:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:37:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:37:20 Point started: ret=0 06:37:20 point_skyscan result=0 06:37:21 Check angles 06:37:21 SkyScan query 06:37:22 SkyScan query done: ret=0 az=64.38<-4292 ze=66.525<-7565 Statuses=0009 0008 06:37:22 Msec=0 True Az=64.38 Ze=66.525 Az status=0009 Ze status=0008 06:37:22 Check angles 06:37:22 SkyScan query 06:37:22 SkyScan query done: ret=0 az=81.9<-5460 ze=66.525<-7565 Statuses=0009 0008 06:37:22 Msec=750 True Az=81.9 Ze=66.525 Az status=0009 Ze status=0008 06:37:23 Check angles 06:37:23 SkyScan query 06:37:23 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 06:37:23 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 06:37:23 Check angles 06:37:23 SkyScan query 06:37:24 SkyScan query done: ret=0 az=117.27<-7818 ze=66.495<-7567 Statuses=0009 0008 06:37:24 Msec=2250 True Az=117.27 Ze=66.495 Az status=0009 Ze status=0008 06:37:24 Check angles 06:37:24 SkyScan query 06:37:25 SkyScan query done: ret=0 az=134.835<-8989 ze=66.495<-7567 Statuses=0009 0008 06:37:25 Msec=3000 True Az=134.835 Ze=66.495 Az status=0009 Ze status=0008 06:37:25 Check angles 06:37:25 SkyScan query 06:37:25 SkyScan query done: ret=0 az=152.4<-10160 ze=66.495<-7567 Statuses=0009 0008 06:37:25 Msec=3750 True Az=152.4 Ze=66.495 Az status=0009 Ze status=0008 06:37:26 Check angles 06:37:26 SkyScan query 06:37:26 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:37:26 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:37:26 Message to Master queued w/err=0: serial=212744 error=0 06:37:31 Received message from Master: op=Filter serial=212745 06:37:31 Color wheel filter change from 0 to 0 06:37:31 FLIGetFilterPos err=0 currentPosition=0 06:37:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:31 Filter is already there-color wheel unchanged 06:37:31 Received message from Master: op=Shutter serial=212746 06:37:31 Shutter LASER close 06:37:31 Received message from Camera: op=State serial=212748 06:37:31 GetSingleValue result=40 Value=cccccccc 06:37:31 SkyScan query 06:37:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:37:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:32 Parameters OK 06:37:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:32 Set A/D data flow result=40 06:37:32 Set A/D channel type result=40 06:37:32 Set A/D encoding result=40 06:37:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:32 Set channel filter=0.000000e+000 result=40 06:37:32 Config A/D Result=40 06:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:32 Get A/D filter: -9.255963e+061 result=40 06:37:32 Get A/D value=-858993460 result=40 06:37:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:32 Parameters OK 06:37:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:32 Set A/D data flow result=40 06:37:32 Set A/D channel type result=40 06:37:32 Set A/D encoding result=40 06:37:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:32 Set channel filter=0.000000e+000 result=40 06:37:32 Config A/D Result=40 06:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:32 Get A/D filter: -9.255963e+061 result=40 06:37:32 Get A/D value=-858993460 result=40 06:37:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:32 Aux= 06:37:32 Message to Camera, serial 212748 queued 06:38:09 Received message from Master: op=PointingHead serial=212761 06:38:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:38:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:38:09 Point started: ret=0 06:38:09 point_skyscan result=0 06:38:10 Check angles 06:38:10 SkyScan query 06:38:11 SkyScan query done: ret=0 az=134.835<-8989 ze=96.435<-5571 Statuses=0009 0009 06:38:11 Msec=0 True Az=134.835 Ze=96.435 Az status=0009 Ze status=0009 06:38:11 Check angles 06:38:11 SkyScan query 06:38:11 SkyScan query done: ret=0 az=130.995<-8733 ze=117.795<-4147 Statuses=0008 0009 06:38:11 Msec=750 True Az=130.995 Ze=117.795 Az status=0008 Ze status=0009 06:38:12 Check angles 06:38:12 SkyScan query 06:38:12 SkyScan query done: ret=0 az=130.995<-8733 ze=138.75<-2750 Statuses=0008 0009 06:38:12 Msec=1500 True Az=130.995 Ze=138.75 Az status=0008 Ze status=0009 06:38:12 Check angles 06:38:12 SkyScan query 06:38:13 SkyScan query done: ret=0 az=130.995<-8733 ze=159.735<-1351 Statuses=0008 0009 06:38:13 Msec=2250 True Az=130.995 Ze=159.735 Az status=0008 Ze status=0009 06:38:13 Check angles 06:38:13 SkyScan query 06:38:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.325<-23955 Statuses=0008 0009 06:38:14 Msec=3000 True Az=130.995 Ze=-179.325 Az status=0008 Ze status=0009 06:38:14 Check angles 06:38:14 SkyScan query 06:38:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.37<-22558 Statuses=0008 0009 06:38:14 Msec=3750 True Az=130.995 Ze=-158.37 Az status=0008 Ze status=0009 06:38:15 Check angles 06:38:15 SkyScan query 06:38:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 06:38:15 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 06:38:15 Check angles 06:38:15 SkyScan query 06:38:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 06:38:16 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 06:38:16 Message to Master queued w/err=0: serial=212761 error=0 06:38:21 Received message from Master: op=Filter serial=212762 06:38:21 Color wheel filter change from 0 to 0 06:38:21 FLIGetFilterPos err=0 currentPosition=0 06:38:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:21 Filter is already there-color wheel unchanged 06:38:21 Received message from Master: op=Shutter serial=212763 06:38:21 Shutter LASER close 06:38:21 Received message from Camera: op=State serial=212765 06:38:21 GetSingleValue result=40 Value=cccccccc 06:38:21 SkyScan query 06:38:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:38:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:22 Parameters OK 06:38:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:22 Set A/D data flow result=40 06:38:22 Set A/D channel type result=40 06:38:22 Set A/D encoding result=40 06:38:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:22 Set channel filter=0.000000e+000 result=40 06:38:22 Config A/D Result=40 06:38:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:22 Get A/D filter: -9.255963e+061 result=40 06:38:22 Get A/D value=-858993460 result=40 06:38:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:22 Parameters OK 06:38:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:22 Set A/D data flow result=40 06:38:22 Set A/D channel type result=40 06:38:22 Set A/D encoding result=40 06:38:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:22 Set channel filter=0.000000e+000 result=40 06:38:22 Config A/D Result=40 06:38:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:22 Get A/D filter: -9.255963e+061 result=40 06:38:22 Get A/D value=-858993460 result=40 06:38:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:22 Aux= 06:38:22 Message to Camera, serial 212765 queued 06:38:58 Received message from Master: op=PointingHead serial=212778 06:38:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:38:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:38:59 Point started: ret=0 06:38:59 point_skyscan result=0 06:39:00 Check angles 06:39:00 SkyScan query 06:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0009 0009 06:39:00 Msec=0 True Az=112.995 Ze=-171.3 Az status=0009 Ze status=0009 06:39:00 Check angles 06:39:00 SkyScan query 06:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:39:01 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:39:01 Message to Master queued w/err=0: serial=212778 error=0 06:39:06 Received message from Master: op=Filter serial=212779 06:39:06 Color wheel filter change from 0 to 0 06:39:06 FLIGetFilterPos err=0 currentPosition=0 06:39:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:06 Filter is already there-color wheel unchanged 06:39:06 Received message from Master: op=Shutter serial=212780 06:39:06 Shutter LASER open 06:39:06 Received message from Camera: op=State serial=212782 06:39:06 GetSingleValue result=40 Value=cccccccc 06:39:06 SkyScan query 06:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:39:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:07 Parameters OK 06:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:07 Set A/D data flow result=40 06:39:07 Set A/D channel type result=40 06:39:07 Set A/D encoding result=40 06:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:07 Set channel filter=0.000000e+000 result=40 06:39:07 Config A/D Result=40 06:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:07 Get A/D filter: -9.255963e+061 result=40 06:39:07 Get A/D value=-858993460 result=40 06:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:07 Parameters OK 06:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:07 Set A/D data flow result=40 06:39:07 Set A/D channel type result=40 06:39:07 Set A/D encoding result=40 06:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:07 Set channel filter=0.000000e+000 result=40 06:39:07 Config A/D Result=40 06:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:07 Get A/D filter: -9.255963e+061 result=40 06:39:07 Get A/D value=-858993460 result=40 06:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:07 Aux= 06:39:07 Message to Camera, serial 212782 queued 06:39:15 Received message from Master: op=Shutter serial=212792 06:39:15 Shutter LASER close 06:39:16 Received message from Master: op=PointingHead serial=212796 06:39:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:39:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:39:16 Point started: ret=0 06:39:16 point_skyscan result=0 06:39:17 Check angles 06:39:17 SkyScan query 06:39:18 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.25<-21550 Statuses=0009 0009 06:39:18 Msec=0 True Az=135.93 Ze=-143.25 Az status=0009 Ze status=0009 06:39:18 Check angles 06:39:18 SkyScan query 06:39:18 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.845<-20123 Statuses=0009 0009 06:39:18 Msec=750 True Az=153.78 Ze=-121.845 Az status=0009 Ze status=0009 06:39:19 Check angles 06:39:19 SkyScan query 06:39:19 SkyScan query done: ret=0 az=171.645<-11443 ze=-100.395<-18693 Statuses=0009 0009 06:39:19 Msec=1500 True Az=171.645 Ze=-100.395 Az status=0009 Ze status=0009 06:39:19 Check angles 06:39:19 SkyScan query 06:39:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.485<-17299 Statuses=0008 0009 06:39:20 Msec=2250 True Az=176.01 Ze=-79.485 Az status=0008 Ze status=0009 06:39:20 Check angles 06:39:20 SkyScan query 06:39:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.095<-15873 Statuses=0008 0009 06:39:21 Msec=3000 True Az=176.01 Ze=-58.095 Az status=0008 Ze status=0009 06:39:21 Check angles 06:39:21 SkyScan query 06:39:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 06:39:21 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 06:39:21 Message to Master queued w/err=0: serial=212796 error=0 06:39:26 Received message from Master: op=Filter serial=212797 06:39:26 Color wheel filter change from 0 to 0 06:39:26 FLIGetFilterPos err=0 currentPosition=0 06:39:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:26 Filter is already there-color wheel unchanged 06:39:27 Received message from Master: op=Shutter serial=212798 06:39:27 Shutter LASER close 06:39:27 Received message from Camera: op=State serial=212800 06:39:27 GetSingleValue result=40 Value=cccccccc 06:39:27 SkyScan query 06:39:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:39:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:27 Parameters OK 06:39:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:27 Set A/D data flow result=40 06:39:27 Set A/D channel type result=40 06:39:27 Set A/D encoding result=40 06:39:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:27 Set channel filter=0.000000e+000 result=40 06:39:27 Config A/D Result=40 06:39:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:27 Get A/D filter: -9.255963e+061 result=40 06:39:27 Get A/D value=-858993460 result=40 06:39:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:27 Parameters OK 06:39:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:27 Set A/D data flow result=40 06:39:27 Set A/D channel type result=40 06:39:27 Set A/D encoding result=40 06:39:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:27 Set channel filter=0.000000e+000 result=40 06:39:27 Config A/D Result=40 06:39:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:27 Get A/D filter: -9.255963e+061 result=40 06:39:27 Get A/D value=-858993460 result=40 06:39:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:27 Aux= 06:39:27 Message to Camera, serial 212800 queued 06:40:04 Received message from Master: op=PointingHead serial=212813 06:40:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:40:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:40:05 Point started: ret=0 06:40:05 point_skyscan result=0 06:40:05 Check angles 06:40:05 SkyScan query 06:40:06 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.57<-13438 Statuses=0009 0009 06:40:06 Msec=0 True Az=152.73 Ze=-21.57 Az status=0009 Ze status=0009 06:40:06 Check angles 06:40:06 SkyScan query 06:40:07 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.54<-12036 Statuses=0009 0009 06:40:07 Msec=750 True Az=135.36 Ze=-0.54 Az status=0009 Ze status=0009 06:40:07 Check angles 06:40:07 SkyScan query 06:40:07 SkyScan query done: ret=0 az=117.765<-7851 ze=20.34<-10644 Statuses=0009 0009 06:40:07 Msec=1500 True Az=117.765 Ze=20.34 Az status=0009 Ze status=0009 06:40:08 Check angles 06:40:08 SkyScan query 06:40:08 SkyScan query done: ret=0 az=100.485<-6699 ze=41.37<-9242 Statuses=0009 0009 06:40:08 Msec=2250 True Az=100.485 Ze=41.37 Az status=0009 Ze status=0009 06:40:08 Check angles 06:40:08 SkyScan query 06:40:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.585<-8561 Statuses=0009 0008 06:40:09 Msec=3000 True Az=85.995 Ze=51.585 Az status=0009 Ze status=0008 06:40:09 Check angles 06:40:09 SkyScan query 06:40:10 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 06:40:10 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 06:40:10 Message to Master queued w/err=0: serial=212813 error=0 06:40:15 Received message from Master: op=Filter serial=212814 06:40:15 Color wheel filter change from 0 to 0 06:40:15 FLIGetFilterPos err=0 currentPosition=0 06:40:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:15 Filter is already there-color wheel unchanged 06:40:15 Received message from Master: op=Shutter serial=212815 06:40:15 Shutter LASER close 06:40:15 Received message from Camera: op=State serial=212817 06:40:15 GetSingleValue result=40 Value=cccccccc 06:40:15 SkyScan query 06:40:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 06:40:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:15 Parameters OK 06:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:15 Set A/D data flow result=40 06:40:15 Set A/D channel type result=40 06:40:15 Set A/D encoding result=40 06:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:15 Set channel filter=0.000000e+000 result=40 06:40:15 Config A/D Result=40 06:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:15 Get A/D filter: -9.255963e+061 result=40 06:40:15 Get A/D value=-858993460 result=40 06:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:15 Parameters OK 06:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:15 Set A/D data flow result=40 06:40:15 Set A/D channel type result=40 06:40:15 Set A/D encoding result=40 06:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:15 Set channel filter=0.000000e+000 result=40 06:40:15 Config A/D Result=40 06:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:15 Get A/D filter: -9.255963e+061 result=40 06:40:15 Get A/D value=-858993460 result=40 06:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:15 Aux= 06:40:15 Message to Camera, serial 212817 queued 06:40:52 Received message from Master: op=PointingHead serial=212830 06:40:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:40:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:40:53 Point started: ret=0 06:40:53 point_skyscan result=0 06:40:54 Check angles 06:40:54 SkyScan query 06:40:54 SkyScan query done: ret=0 az=85.995<-5733 ze=21.42<-10572 Statuses=0008 0009 06:40:54 Msec=0 True Az=85.995 Ze=21.42 Az status=0008 Ze status=0009 06:40:54 Check angles 06:40:54 SkyScan query 06:40:55 SkyScan query done: ret=0 az=85.995<-5733 ze=0.51<-11966 Statuses=0008 0009 06:40:55 Msec=750 True Az=85.995 Ze=0.51 Az status=0008 Ze status=0009 06:40:55 Check angles 06:40:55 SkyScan query 06:40:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.49<-13366 Statuses=0008 0009 06:40:56 Msec=1500 True Az=85.995 Ze=-20.49 Az status=0008 Ze status=0009 06:40:56 Check angles 06:40:56 SkyScan query 06:40:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.4<-14760 Statuses=0008 0009 06:40:56 Msec=2250 True Az=85.995 Ze=-41.4 Az status=0008 Ze status=0009 06:40:57 Check angles 06:40:57 SkyScan query 06:40:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:40:57 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:40:57 Message to Master queued w/err=0: serial=212830 error=0 06:41:02 Received message from Master: op=Filter serial=212831 06:41:02 Color wheel filter change from 0 to 0 06:41:02 FLIGetFilterPos err=0 currentPosition=0 06:41:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:02 Filter is already there-color wheel unchanged 06:41:02 Received message from Master: op=Shutter serial=212832 06:41:02 Shutter LASER close 06:41:02 Received message from Camera: op=State serial=212834 06:41:02 GetSingleValue result=40 Value=cccccccc 06:41:02 SkyScan query 06:41:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:41:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:03 Parameters OK 06:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:03 Set A/D data flow result=40 06:41:03 Set A/D channel type result=40 06:41:03 Set A/D encoding result=40 06:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:03 Set channel filter=0.000000e+000 result=40 06:41:03 Config A/D Result=40 06:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:03 Get A/D filter: -9.255963e+061 result=40 06:41:03 Get A/D value=-858993460 result=40 06:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:03 Parameters OK 06:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:03 Set A/D data flow result=40 06:41:03 Set A/D channel type result=40 06:41:03 Set A/D encoding result=40 06:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:03 Set channel filter=0.000000e+000 result=40 06:41:03 Config A/D Result=40 06:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:03 Get A/D filter: -9.255963e+061 result=40 06:41:03 Get A/D value=-858993460 result=40 06:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:03 Aux= 06:41:03 Message to Camera, serial 212834 queued 06:41:40 Received message from Master: op=PointingHead serial=212847 06:41:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:41:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:41:40 Point started: ret=0 06:41:40 point_skyscan result=0 06:41:41 Check angles 06:41:41 SkyScan query 06:41:41 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.585<-17439 Statuses=0009 0009 06:41:41 Msec=0 True Az=109.215 Ze=-81.585 Az status=0009 Ze status=0009 06:41:42 Check angles 06:41:42 SkyScan query 06:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 06:41:42 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 06:41:42 Check angles 06:41:42 SkyScan query 06:41:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 06:41:43 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 06:41:43 Check angles 06:41:43 SkyScan query 06:41:44 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.375<-21625 Statuses=0008 0009 06:41:44 Msec=2250 True Az=112.98 Ze=-144.375 Az status=0008 Ze status=0009 06:41:44 Check angles 06:41:44 SkyScan query 06:41:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.39<-23026 Statuses=0008 0009 06:41:44 Msec=3000 True Az=112.995 Ze=-165.39 Az status=0008 Ze status=0009 06:41:45 Check angles 06:41:45 SkyScan query 06:41:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:41:45 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:41:45 Message to Master queued w/err=0: serial=212847 error=0 06:41:50 Received message from Master: op=Filter serial=212848 06:41:50 Color wheel filter change from 0 to 0 06:41:50 FLIGetFilterPos err=0 currentPosition=0 06:41:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:50 Filter is already there-color wheel unchanged 06:41:50 Received message from Master: op=Shutter serial=212849 06:41:50 Shutter LASER open 06:41:51 Received message from Camera: op=State serial=212851 06:41:51 GetSingleValue result=40 Value=cccccccc 06:41:51 SkyScan query 06:41:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:41:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:51 Parameters OK 06:41:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:51 Set A/D data flow result=40 06:41:51 Set A/D channel type result=40 06:41:51 Set A/D encoding result=40 06:41:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:51 Set channel filter=0.000000e+000 result=40 06:41:51 Config A/D Result=40 06:41:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:51 Get A/D filter: -9.255963e+061 result=40 06:41:51 Get A/D value=-858993460 result=40 06:41:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:51 Parameters OK 06:41:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:51 Set A/D data flow result=40 06:41:51 Set A/D channel type result=40 06:41:51 Set A/D encoding result=40 06:41:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:51 Set channel filter=0.000000e+000 result=40 06:41:51 Config A/D Result=40 06:41:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:51 Get A/D filter: -9.255963e+061 result=40 06:41:51 Get A/D value=-858993460 result=40 06:41:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:51 Aux= 06:41:51 Message to Camera, serial 212851 queued 06:42:00 Received message from Master: op=Shutter serial=212861 06:42:00 Shutter LASER close 06:42:00 Received message from Master: op=PointingHead serial=212865 06:42:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:42:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:42:00 Point started: ret=0 06:42:00 point_skyscan result=0 06:42:01 Check angles 06:42:01 SkyScan query 06:42:02 SkyScan query done: ret=0 az=89.655<-5977 ze=156.915<-1539 Statuses=0009 0009 06:42:02 Msec=0 True Az=89.655 Ze=156.915 Az status=0009 Ze status=0009 06:42:02 Check angles 06:42:02 SkyScan query 06:42:02 SkyScan query done: ret=0 az=72.075<-4805 ze=135.945<-2937 Statuses=0009 0009 06:42:02 Msec=750 True Az=72.075 Ze=135.945 Az status=0009 Ze status=0009 06:42:03 Check angles 06:42:03 SkyScan query 06:42:03 SkyScan query done: ret=0 az=54.87<-3658 ze=115.005<-4333 Statuses=0009 0009 06:42:03 Msec=1500 True Az=54.87 Ze=115.005 Az status=0009 Ze status=0009 06:42:03 Check angles 06:42:03 SkyScan query 06:42:04 SkyScan query done: ret=0 az=40.965<-2731 ze=93.615<-5759 Statuses=0009 0009 06:42:04 Msec=2250 True Az=40.965 Ze=93.615 Az status=0009 Ze status=0009 06:42:04 Check angles 06:42:04 SkyScan query 06:42:05 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 06:42:05 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 06:42:05 Check angles 06:42:05 SkyScan query 06:42:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.14<-8524 Statuses=0008 0009 06:42:05 Msec=3750 True Az=40.995 Ze=52.14 Az status=0008 Ze status=0009 06:42:06 Check angles 06:42:06 SkyScan query 06:42:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:42:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:42:06 Message to Master queued w/err=0: serial=212865 error=0 06:42:11 Received message from Master: op=Filter serial=212866 06:42:11 Color wheel filter change from 0 to 0 06:42:11 FLIGetFilterPos err=0 currentPosition=0 06:42:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:11 Filter is already there-color wheel unchanged 06:42:11 Received message from Master: op=Shutter serial=212867 06:42:11 Shutter LASER close 06:42:12 Received message from Camera: op=State serial=212869 06:42:12 GetSingleValue result=40 Value=cccccccc 06:42:12 SkyScan query 06:42:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:42:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:12 Parameters OK 06:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:12 Set A/D data flow result=40 06:42:12 Set A/D channel type result=40 06:42:12 Set A/D encoding result=40 06:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:12 Set channel filter=0.000000e+000 result=40 06:42:12 Config A/D Result=40 06:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:12 Get A/D filter: -9.255963e+061 result=40 06:42:12 Get A/D value=-858993460 result=40 06:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:12 Parameters OK 06:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:12 Set A/D data flow result=40 06:42:12 Set A/D channel type result=40 06:42:12 Set A/D encoding result=40 06:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:12 Set channel filter=0.000000e+000 result=40 06:42:12 Config A/D Result=40 06:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:12 Get A/D filter: -9.255963e+061 result=40 06:42:12 Get A/D value=-858993460 result=40 06:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:12 Aux= 06:42:12 Message to Camera, serial 212869 queued 06:42:49 Received message from Master: op=PointingHead serial=212882 06:42:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:42:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:42:49 Point started: ret=0 06:42:49 point_skyscan result=0 06:42:50 Check angles 06:42:50 SkyScan query 06:42:51 SkyScan query done: ret=0 az=63.96<-4264 ze=66.525<-7565 Statuses=0009 0008 06:42:51 Msec=0 True Az=63.96 Ze=66.525 Az status=0009 Ze status=0008 06:42:51 Check angles 06:42:51 SkyScan query 06:42:51 SkyScan query done: ret=0 az=81.855<-5457 ze=66.51<-7566 Statuses=0009 0008 06:42:51 Msec=750 True Az=81.855 Ze=66.51 Az status=0009 Ze status=0008 06:42:52 Check angles 06:42:52 SkyScan query 06:42:52 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 06:42:52 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 06:42:52 Check angles 06:42:52 SkyScan query 06:42:53 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 06:42:53 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 06:42:53 Check angles 06:42:53 SkyScan query 06:42:54 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 06:42:54 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 06:42:54 Check angles 06:42:54 SkyScan query 06:42:54 SkyScan query done: ret=0 az=151.575<-10105 ze=66.495<-7567 Statuses=0009 0008 06:42:54 Msec=3750 True Az=151.575 Ze=66.495 Az status=0009 Ze status=0008 06:42:55 Check angles 06:42:55 SkyScan query 06:42:55 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:42:55 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:42:55 Message to Master queued w/err=0: serial=212882 error=0 06:43:00 Received message from Master: op=Filter serial=212883 06:43:00 Color wheel filter change from 0 to 0 06:43:00 FLIGetFilterPos err=0 currentPosition=0 06:43:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:00 Filter is already there-color wheel unchanged 06:43:00 Received message from Master: op=Shutter serial=212884 06:43:00 Shutter LASER close 06:43:00 Received message from Camera: op=State serial=212886 06:43:00 GetSingleValue result=40 Value=cccccccc 06:43:00 SkyScan query 06:43:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:43:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:01 Parameters OK 06:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:01 Set A/D data flow result=40 06:43:01 Set A/D channel type result=40 06:43:01 Set A/D encoding result=40 06:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:01 Set channel filter=0.000000e+000 result=40 06:43:01 Config A/D Result=40 06:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:01 Get A/D filter: -9.255963e+061 result=40 06:43:01 Get A/D value=-858993460 result=40 06:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:01 Parameters OK 06:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:01 Set A/D data flow result=40 06:43:01 Set A/D channel type result=40 06:43:01 Set A/D encoding result=40 06:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:01 Set channel filter=0.000000e+000 result=40 06:43:01 Config A/D Result=40 06:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:01 Get A/D filter: -9.255963e+061 result=40 06:43:01 Get A/D value=-858993460 result=40 06:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:01 Aux= 06:43:01 Message to Camera, serial 212886 queued 06:43:38 Received message from Master: op=PointingHead serial=212899 06:43:38 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:43:38 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:43:38 Point started: ret=0 06:43:38 point_skyscan result=0 06:43:39 Check angles 06:43:39 SkyScan query 06:43:40 SkyScan query done: ret=0 az=134.85<-8990 ze=96.465<-5569 Statuses=0009 0009 06:43:40 Msec=0 True Az=134.85 Ze=96.465 Az status=0009 Ze status=0009 06:43:40 Check angles 06:43:40 SkyScan query 06:43:40 SkyScan query done: ret=0 az=130.995<-8733 ze=117.42<-4172 Statuses=0008 0009 06:43:40 Msec=750 True Az=130.995 Ze=117.42 Az status=0008 Ze status=0009 06:43:40 Check angles 06:43:40 SkyScan query 06:43:41 SkyScan query done: ret=0 az=130.995<-8733 ze=138.345<-2777 Statuses=0008 0009 06:43:41 Msec=1500 True Az=130.995 Ze=138.345 Az status=0008 Ze status=0009 06:43:41 Check angles 06:43:41 SkyScan query 06:43:42 SkyScan query done: ret=0 az=130.995<-8733 ze=159.33<-1378 Statuses=0008 0009 06:43:42 Msec=2250 True Az=130.995 Ze=159.33 Az status=0008 Ze status=0009 06:43:42 Check angles 06:43:42 SkyScan query 06:43:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.745<-23983 Statuses=0008 0009 06:43:43 Msec=3000 True Az=130.995 Ze=-179.745 Az status=0008 Ze status=0009 06:43:43 Check angles 06:43:43 SkyScan query 06:43:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.79<-22586 Statuses=0008 0009 06:43:43 Msec=3750 True Az=130.995 Ze=-158.79 Az status=0008 Ze status=0009 06:43:43 Check angles 06:43:43 SkyScan query 06:43:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 06:43:44 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 06:43:44 Check angles 06:43:44 SkyScan query 06:43:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 06:43:45 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 06:43:45 Message to Master queued w/err=0: serial=212899 error=0 06:43:50 Received message from Master: op=Filter serial=212900 06:43:50 Color wheel filter change from 0 to 0 06:43:50 FLIGetFilterPos err=0 currentPosition=0 06:43:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:50 Filter is already there-color wheel unchanged 06:43:50 Received message from Master: op=Shutter serial=212901 06:43:50 Shutter LASER close 06:43:50 Received message from Camera: op=State serial=212903 06:43:50 GetSingleValue result=40 Value=cccccccc 06:43:50 SkyScan query 06:43:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:43:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:51 Parameters OK 06:43:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:51 Set A/D data flow result=40 06:43:51 Set A/D channel type result=40 06:43:51 Set A/D encoding result=40 06:43:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:51 Set channel filter=0.000000e+000 result=40 06:43:51 Config A/D Result=40 06:43:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:51 Get A/D filter: -9.255963e+061 result=40 06:43:51 Get A/D value=-858993460 result=40 06:43:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:51 Parameters OK 06:43:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:51 Set A/D data flow result=40 06:43:51 Set A/D channel type result=40 06:43:51 Set A/D encoding result=40 06:43:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:51 Set channel filter=0.000000e+000 result=40 06:43:51 Config A/D Result=40 06:43:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:51 Get A/D filter: -9.255963e+061 result=40 06:43:51 Get A/D value=-858993460 result=40 06:43:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:51 Aux= 06:43:51 Message to Camera, serial 212903 queued 06:44:26 Received message from Master: op=PointingHead serial=212915 06:44:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:44:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:44:27 Point started: ret=0 06:44:27 point_skyscan result=0 06:44:28 Check angles 06:44:28 SkyScan query 06:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0009 0009 06:44:28 Msec=0 True Az=112.995 Ze=-171.48 Az status=0009 Ze status=0009 06:44:28 Check angles 06:44:28 SkyScan query 06:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:44:29 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:44:29 Message to Master queued w/err=0: serial=212915 error=0 06:44:34 Received message from Master: op=Filter serial=212916 06:44:34 Color wheel filter change from 0 to 0 06:44:34 FLIGetFilterPos err=0 currentPosition=0 06:44:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:34 Filter is already there-color wheel unchanged 06:44:34 Received message from Master: op=Shutter serial=212917 06:44:34 Shutter LASER open 06:44:34 Received message from Camera: op=State serial=212919 06:44:34 GetSingleValue result=40 Value=cccccccc 06:44:34 SkyScan query 06:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:44:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:35 Parameters OK 06:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:35 Set A/D data flow result=40 06:44:35 Set A/D channel type result=40 06:44:35 Set A/D encoding result=40 06:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:35 Set channel filter=0.000000e+000 result=40 06:44:35 Config A/D Result=40 06:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:35 Get A/D filter: -9.255963e+061 result=40 06:44:35 Get A/D value=-858993460 result=40 06:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:35 Parameters OK 06:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:35 Set A/D data flow result=40 06:44:35 Set A/D channel type result=40 06:44:35 Set A/D encoding result=40 06:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:35 Set channel filter=0.000000e+000 result=40 06:44:35 Config A/D Result=40 06:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:35 Get A/D filter: -9.255963e+061 result=40 06:44:35 Get A/D value=-858993460 result=40 06:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:35 Aux= 06:44:35 Message to Camera, serial 212919 queued 06:44:43 Received message from Master: op=Shutter serial=212929 06:44:43 Shutter LASER close 06:44:44 Received message from Master: op=PointingHead serial=212933 06:44:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:44:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:44:44 Point started: ret=0 06:44:44 point_skyscan result=0 06:44:45 Check angles 06:44:45 SkyScan query 06:44:46 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.25<-21550 Statuses=0009 0009 06:44:46 Msec=0 True Az=135.96 Ze=-143.25 Az status=0009 Ze status=0009 06:44:46 Check angles 06:44:46 SkyScan query 06:44:46 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.295<-20153 Statuses=0009 0009 06:44:46 Msec=750 True Az=153.54 Ze=-122.295 Az status=0009 Ze status=0009 06:44:47 Check angles 06:44:47 SkyScan query 06:44:47 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.43<-18762 Statuses=0009 0009 06:44:47 Msec=1500 True Az=170.97 Ze=-101.43 Az status=0009 Ze status=0009 06:44:47 Check angles 06:44:47 SkyScan query 06:44:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.415<-17361 Statuses=0008 0009 06:44:48 Msec=2250 True Az=175.995 Ze=-80.415 Az status=0008 Ze status=0009 06:44:48 Check angles 06:44:48 SkyScan query 06:44:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.475<-15965 Statuses=0008 0009 06:44:49 Msec=3000 True Az=175.995 Ze=-59.475 Az status=0008 Ze status=0009 06:44:49 Check angles 06:44:49 SkyScan query 06:44:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:44:49 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:44:49 Message to Master queued w/err=0: serial=212933 error=0 06:44:54 Received message from Master: op=Filter serial=212934 06:44:54 Color wheel filter change from 0 to 0 06:44:54 FLIGetFilterPos err=0 currentPosition=0 06:44:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:54 Filter is already there-color wheel unchanged 06:44:55 Received message from Master: op=Shutter serial=212935 06:44:55 Shutter LASER close 06:44:55 Received message from Camera: op=State serial=212937 06:44:55 GetSingleValue result=40 Value=cccccccc 06:44:55 SkyScan query 06:44:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.495<-15433 Statuses=0008 0008 06:44:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:55 Parameters OK 06:44:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:55 Set A/D data flow result=40 06:44:55 Set A/D channel type result=40 06:44:55 Set A/D encoding result=40 06:44:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:55 Set channel filter=0.000000e+000 result=40 06:44:55 Config A/D Result=40 06:44:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:55 Get A/D filter: -9.255963e+061 result=40 06:44:55 Get A/D value=-858993460 result=40 06:44:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:55 Parameters OK 06:44:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:55 Set A/D data flow result=40 06:44:55 Set A/D channel type result=40 06:44:55 Set A/D encoding result=40 06:44:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:55 Set channel filter=0.000000e+000 result=40 06:44:55 Config A/D Result=40 06:44:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:55 Get A/D filter: -9.255963e+061 result=40 06:44:55 Get A/D value=-858993460 result=40 06:44:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:55 PH type=1 Digital in=000000 Instrument Az=176.009995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:55 Aux= 06:44:55 Message to Camera, serial 212937 queued 06:45:27 Received message from Master: op=Identify serial=212942 [UTC 2018-12-17 06:45:32] 06:45:32 Received message from Master: op=PointingHead serial=212953 06:45:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:45:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:45:33 Point started: ret=0 06:45:33 point_skyscan result=0 06:45:33 Check angles 06:45:33 SkyScan query 06:45:34 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.435<-13429 Statuses=0009 0009 06:45:34 Msec=0 True Az=152.745 Ze=-21.435 Az status=0009 Ze status=0009 06:45:34 Check angles 06:45:34 SkyScan query 06:45:35 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.405<-12027 Statuses=0009 0009 06:45:35 Msec=750 True Az=135.15 Ze=-0.405 Az status=0009 Ze status=0009 06:45:35 Check angles 06:45:35 SkyScan query 06:45:35 SkyScan query done: ret=0 az=117.72<-7848 ze=20.475<-10635 Statuses=0009 0009 06:45:35 Msec=1500 True Az=117.72 Ze=20.475 Az status=0009 Ze status=0009 06:45:36 Check angles 06:45:36 SkyScan query 06:45:36 SkyScan query done: ret=0 az=100.395<-6693 ze=41.49<-9234 Statuses=0009 0009 06:45:36 Msec=2250 True Az=100.395 Ze=41.49 Az status=0009 Ze status=0009 06:45:36 Check angles 06:45:36 SkyScan query 06:45:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.6<-8560 Statuses=0009 0008 06:45:37 Msec=3000 True Az=85.995 Ze=51.6 Az status=0009 Ze status=0008 06:45:37 Check angles 06:45:37 SkyScan query 06:45:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:45:38 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:45:38 Message to Master queued w/err=0: serial=212953 error=0 06:45:43 Received message from Master: op=Filter serial=212954 06:45:43 Color wheel filter change from 0 to 0 06:45:43 FLIGetFilterPos err=0 currentPosition=0 06:45:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:43 Filter is already there-color wheel unchanged 06:45:43 Received message from Master: op=Shutter serial=212955 06:45:43 Shutter LASER close 06:45:43 Received message from Camera: op=State serial=212957 06:45:43 GetSingleValue result=40 Value=cccccccc 06:45:43 SkyScan query 06:45:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:45:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:43 Parameters OK 06:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:43 Set A/D data flow result=40 06:45:43 Set A/D channel type result=40 06:45:43 Set A/D encoding result=40 06:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:43 Set channel filter=0.000000e+000 result=40 06:45:43 Config A/D Result=40 06:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:43 Get A/D filter: -9.255963e+061 result=40 06:45:43 Get A/D value=-858993460 result=40 06:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:43 Parameters OK 06:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:43 Set A/D data flow result=40 06:45:43 Set A/D channel type result=40 06:45:43 Set A/D encoding result=40 06:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:43 Set channel filter=0.000000e+000 result=40 06:45:43 Config A/D Result=40 06:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:43 Get A/D filter: -9.255963e+061 result=40 06:45:43 Get A/D value=-858993460 result=40 06:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:43 Aux= 06:45:43 Message to Camera, serial 212957 queued 06:46:20 Received message from Master: op=PointingHead serial=212970 06:46:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:46:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:46:21 Point started: ret=0 06:46:21 point_skyscan result=0 06:46:21 Check angles 06:46:21 SkyScan query 06:46:22 SkyScan query done: ret=0 az=85.995<-5733 ze=21.63<-10558 Statuses=0008 0009 06:46:22 Msec=0 True Az=85.995 Ze=21.63 Az status=0008 Ze status=0009 06:46:22 Check angles 06:46:22 SkyScan query 06:46:23 SkyScan query done: ret=0 az=85.995<-5733 ze=0.735<-11951 Statuses=0008 0009 06:46:23 Msec=750 True Az=85.995 Ze=0.735 Az status=0008 Ze status=0009 06:46:23 Check angles 06:46:23 SkyScan query 06:46:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.73<-13382 Statuses=0008 0009 06:46:24 Msec=1500 True Az=85.995 Ze=-20.73 Az status=0008 Ze status=0009 06:46:24 Check angles 06:46:24 SkyScan query 06:46:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.655<-14777 Statuses=0008 0009 06:46:24 Msec=2250 True Az=85.995 Ze=-41.655 Az status=0008 Ze status=0009 06:46:24 Check angles 06:46:24 SkyScan query 06:46:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:46:25 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:46:25 Message to Master queued w/err=0: serial=212970 error=0 06:46:30 Received message from Master: op=Filter serial=212971 06:46:30 Color wheel filter change from 0 to 0 06:46:30 FLIGetFilterPos err=0 currentPosition=0 06:46:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:30 Filter is already there-color wheel unchanged 06:46:30 Received message from Master: op=Shutter serial=212972 06:46:30 Shutter LASER close 06:46:30 Received message from Camera: op=State serial=212974 06:46:30 GetSingleValue result=40 Value=cccccccc 06:46:30 SkyScan query 06:46:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:46:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:31 Parameters OK 06:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:31 Set A/D data flow result=40 06:46:31 Set A/D channel type result=40 06:46:31 Set A/D encoding result=40 06:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:31 Set channel filter=0.000000e+000 result=40 06:46:31 Config A/D Result=40 06:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:31 Get A/D filter: -9.255963e+061 result=40 06:46:31 Get A/D value=-858993460 result=40 06:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:31 Parameters OK 06:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:31 Set A/D data flow result=40 06:46:31 Set A/D channel type result=40 06:46:31 Set A/D encoding result=40 06:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:31 Set channel filter=0.000000e+000 result=40 06:46:31 Config A/D Result=40 06:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:31 Get A/D filter: -9.255963e+061 result=40 06:46:31 Get A/D value=-858993460 result=40 06:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:31 Aux= 06:46:31 Message to Camera, serial 212974 queued 06:47:08 Received message from Master: op=PointingHead serial=212987 06:47:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:47:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:47:08 Point started: ret=0 06:47:08 point_skyscan result=0 06:47:09 Check angles 06:47:09 SkyScan query 06:47:09 SkyScan query done: ret=0 az=109.065<-7271 ze=-81.255<-17417 Statuses=0009 0009 06:47:09 Msec=0 True Az=109.065 Ze=-81.255 Az status=0009 Ze status=0009 06:47:10 Check angles 06:47:10 SkyScan query 06:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 06:47:10 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 06:47:10 Check angles 06:47:10 SkyScan query 06:47:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 06:47:11 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 06:47:11 Check angles 06:47:11 SkyScan query 06:47:12 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.51<-21634 Statuses=0008 0009 06:47:12 Msec=2250 True Az=112.98 Ze=-144.51 Az status=0008 Ze status=0009 06:47:12 Check angles 06:47:12 SkyScan query 06:47:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 06:47:12 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 06:47:13 Check angles 06:47:13 SkyScan query 06:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:47:13 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:47:13 Message to Master queued w/err=0: serial=212987 error=0 06:47:18 Received message from Master: op=Filter serial=212988 06:47:18 Color wheel filter change from 0 to 0 06:47:18 FLIGetFilterPos err=0 currentPosition=0 06:47:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:18 Filter is already there-color wheel unchanged 06:47:18 Received message from Master: op=Shutter serial=212989 06:47:18 Shutter LASER open 06:47:18 Received message from Camera: op=State serial=212991 06:47:18 GetSingleValue result=40 Value=cccccccc 06:47:18 SkyScan query 06:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:47:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:19 Parameters OK 06:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:19 Set A/D data flow result=40 06:47:19 Set A/D channel type result=40 06:47:19 Set A/D encoding result=40 06:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:19 Set channel filter=0.000000e+000 result=40 06:47:19 Config A/D Result=40 06:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:19 Get A/D filter: -9.255963e+061 result=40 06:47:19 Get A/D value=-858993460 result=40 06:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:19 Parameters OK 06:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:19 Set A/D data flow result=40 06:47:19 Set A/D channel type result=40 06:47:19 Set A/D encoding result=40 06:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:19 Set channel filter=0.000000e+000 result=40 06:47:19 Config A/D Result=40 06:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:19 Get A/D filter: -9.255963e+061 result=40 06:47:19 Get A/D value=-858993460 result=40 06:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:19 Aux= 06:47:19 Message to Camera, serial 212991 queued 06:47:27 Received message from Master: op=Shutter serial=213001 06:47:28 Shutter LASER close 06:47:28 Received message from Master: op=PointingHead serial=213005 06:47:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:47:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:47:28 Point started: ret=0 06:47:28 point_skyscan result=0 06:47:29 Check angles 06:47:29 SkyScan query 06:47:30 SkyScan query done: ret=0 az=89.655<-5977 ze=156.96<-1536 Statuses=0009 0009 06:47:30 Msec=0 True Az=89.655 Ze=156.96 Az status=0009 Ze status=0009 06:47:30 Check angles 06:47:30 SkyScan query 06:47:30 SkyScan query done: ret=0 az=72.06<-4804 ze=136.005<-2933 Statuses=0009 0009 06:47:30 Msec=750 True Az=72.06 Ze=136.005 Az status=0009 Ze status=0009 06:47:31 Check angles 06:47:31 SkyScan query 06:47:31 SkyScan query done: ret=0 az=54.78<-3652 ze=115.065<-4329 Statuses=0009 0009 06:47:31 Msec=1500 True Az=54.78 Ze=115.065 Az status=0009 Ze status=0009 06:47:31 Check angles 06:47:31 SkyScan query 06:47:32 SkyScan query done: ret=0 az=40.965<-2731 ze=94.08<-5728 Statuses=0009 0009 06:47:32 Msec=2250 True Az=40.965 Ze=94.08 Az status=0009 Ze status=0009 06:47:32 Check angles 06:47:32 SkyScan query 06:47:33 SkyScan query done: ret=0 az=40.995<-2733 ze=73.11<-7126 Statuses=0008 0009 06:47:33 Msec=3000 True Az=40.995 Ze=73.11 Az status=0008 Ze status=0009 06:47:33 Check angles 06:47:33 SkyScan query 06:47:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 06:47:33 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 06:47:34 Check angles 06:47:34 SkyScan query 06:47:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:47:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:47:34 Message to Master queued w/err=0: serial=213005 error=0 06:47:39 Received message from Master: op=Filter serial=213006 06:47:39 Color wheel filter change from 0 to 0 06:47:39 FLIGetFilterPos err=0 currentPosition=0 06:47:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:39 Filter is already there-color wheel unchanged 06:47:39 Received message from Master: op=Shutter serial=213007 06:47:39 Shutter LASER close 06:47:39 Received message from Camera: op=State serial=213009 06:47:39 GetSingleValue result=40 Value=cccccccc 06:47:39 SkyScan query 06:47:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:47:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:40 Parameters OK 06:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:40 Set A/D data flow result=40 06:47:40 Set A/D channel type result=40 06:47:40 Set A/D encoding result=40 06:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:40 Set channel filter=0.000000e+000 result=40 06:47:40 Config A/D Result=40 06:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:40 Get A/D filter: -9.255963e+061 result=40 06:47:40 Get A/D value=-858993460 result=40 06:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:40 Parameters OK 06:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:40 Set A/D data flow result=40 06:47:40 Set A/D channel type result=40 06:47:40 Set A/D encoding result=40 06:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:40 Set channel filter=0.000000e+000 result=40 06:47:40 Config A/D Result=40 06:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:40 Get A/D filter: -9.255963e+061 result=40 06:47:40 Get A/D value=-858993460 result=40 06:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:40 Aux= 06:47:40 Message to Camera, serial 213009 queued 06:48:17 Received message from Master: op=PointingHead serial=213022 06:48:17 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:48:17 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:48:17 Point started: ret=0 06:48:17 point_skyscan result=0 06:48:18 Check angles 06:48:18 SkyScan query 06:48:19 SkyScan query done: ret=0 az=63.84<-4256 ze=66.525<-7565 Statuses=0009 0008 06:48:19 Msec=0 True Az=63.84 Ze=66.525 Az status=0009 Ze status=0008 06:48:19 Check angles 06:48:19 SkyScan query 06:48:19 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 06:48:19 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 06:48:20 Check angles 06:48:20 SkyScan query 06:48:20 SkyScan query done: ret=0 az=98.775<-6585 ze=66.51<-7566 Statuses=0009 0008 06:48:20 Msec=1500 True Az=98.775 Ze=66.51 Az status=0009 Ze status=0008 06:48:20 Check angles 06:48:20 SkyScan query 06:48:21 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 06:48:21 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 06:48:21 Check angles 06:48:21 SkyScan query 06:48:22 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 06:48:22 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 06:48:22 Check angles 06:48:22 SkyScan query 06:48:22 SkyScan query done: ret=0 az=151.74<-10116 ze=66.495<-7567 Statuses=0009 0008 06:48:22 Msec=3750 True Az=151.74 Ze=66.495 Az status=0009 Ze status=0008 06:48:23 Check angles 06:48:23 SkyScan query 06:48:23 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:48:23 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:48:23 Message to Master queued w/err=0: serial=213022 error=0 06:48:28 Received message from Master: op=Filter serial=213023 06:48:28 Color wheel filter change from 0 to 0 06:48:28 FLIGetFilterPos err=0 currentPosition=0 06:48:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:28 Filter is already there-color wheel unchanged 06:48:28 Received message from Master: op=Shutter serial=213024 06:48:28 Shutter LASER close 06:48:28 Received message from Camera: op=State serial=213026 06:48:28 GetSingleValue result=40 Value=cccccccc 06:48:28 SkyScan query 06:48:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:48:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:29 Parameters OK 06:48:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:29 Set A/D data flow result=40 06:48:29 Set A/D channel type result=40 06:48:29 Set A/D encoding result=40 06:48:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:29 Set channel filter=0.000000e+000 result=40 06:48:29 Config A/D Result=40 06:48:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:29 Get A/D filter: -9.255963e+061 result=40 06:48:29 Get A/D value=-858993460 result=40 06:48:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:29 Parameters OK 06:48:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:29 Set A/D data flow result=40 06:48:29 Set A/D channel type result=40 06:48:29 Set A/D encoding result=40 06:48:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:29 Set channel filter=0.000000e+000 result=40 06:48:29 Config A/D Result=40 06:48:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:29 Get A/D filter: -9.255963e+061 result=40 06:48:29 Get A/D value=-858993460 result=40 06:48:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:29 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:29 Aux= 06:48:29 Message to Camera, serial 213026 queued 06:49:06 Received message from Master: op=PointingHead serial=213039 06:49:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:49:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:49:06 Point started: ret=0 06:49:06 point_skyscan result=0 06:49:07 Check angles 06:49:07 SkyScan query 06:49:08 SkyScan query done: ret=0 az=134.835<-8989 ze=96.465<-5569 Statuses=0009 0009 06:49:08 Msec=0 True Az=134.835 Ze=96.465 Az status=0009 Ze status=0009 06:49:08 Check angles 06:49:08 SkyScan query 06:49:08 SkyScan query done: ret=0 az=130.995<-8733 ze=117.435<-4171 Statuses=0008 0009 06:49:08 Msec=750 True Az=130.995 Ze=117.435 Az status=0008 Ze status=0009 06:49:09 Check angles 06:49:09 SkyScan query 06:49:09 SkyScan query done: ret=0 az=130.995<-8733 ze=138.345<-2777 Statuses=0008 0009 06:49:09 Msec=1500 True Az=130.995 Ze=138.345 Az status=0008 Ze status=0009 06:49:09 Check angles 06:49:09 SkyScan query 06:49:10 SkyScan query done: ret=0 az=130.995<-8733 ze=159.33<-1378 Statuses=0008 0009 06:49:10 Msec=2250 True Az=130.995 Ze=159.33 Az status=0008 Ze status=0009 06:49:10 Check angles 06:49:10 SkyScan query 06:49:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.76<-23984 Statuses=0008 0009 06:49:11 Msec=3000 True Az=130.995 Ze=-179.76 Az status=0008 Ze status=0009 06:49:11 Check angles 06:49:11 SkyScan query 06:49:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.79<-22586 Statuses=0008 0009 06:49:11 Msec=3750 True Az=130.995 Ze=-158.79 Az status=0008 Ze status=0009 06:49:12 Check angles 06:49:12 SkyScan query 06:49:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 06:49:12 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 06:49:12 Check angles 06:49:12 SkyScan query 06:49:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 06:49:13 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 06:49:13 Message to Master queued w/err=0: serial=213039 error=0 06:49:18 Received message from Master: op=Filter serial=213040 06:49:18 Color wheel filter change from 0 to 0 06:49:18 FLIGetFilterPos err=0 currentPosition=0 06:49:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:18 Filter is already there-color wheel unchanged 06:49:18 Received message from Master: op=Shutter serial=213041 06:49:18 Shutter LASER close 06:49:18 Received message from Camera: op=State serial=213043 06:49:18 GetSingleValue result=40 Value=cccccccc 06:49:18 SkyScan query 06:49:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:49:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:19 Parameters OK 06:49:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:19 Set A/D data flow result=40 06:49:19 Set A/D channel type result=40 06:49:19 Set A/D encoding result=40 06:49:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:19 Set channel filter=0.000000e+000 result=40 06:49:19 Config A/D Result=40 06:49:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:19 Get A/D filter: -9.255963e+061 result=40 06:49:19 Get A/D value=-858993460 result=40 06:49:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:19 Parameters OK 06:49:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:19 Set A/D data flow result=40 06:49:19 Set A/D channel type result=40 06:49:19 Set A/D encoding result=40 06:49:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:19 Set channel filter=0.000000e+000 result=40 06:49:19 Config A/D Result=40 06:49:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:19 Get A/D filter: -9.255963e+061 result=40 06:49:19 Get A/D value=-858993460 result=40 06:49:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:19 Aux= 06:49:19 Message to Camera, serial 213043 queued 06:49:55 Received message from Master: op=PointingHead serial=213056 06:49:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:49:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:49:56 Point started: ret=0 06:49:56 point_skyscan result=0 06:49:57 Check angles 06:49:57 SkyScan query 06:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.24<-23416 Statuses=0009 0009 06:49:57 Msec=0 True Az=112.995 Ze=-171.24 Az status=0009 Ze status=0009 06:49:57 Check angles 06:49:57 SkyScan query 06:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:49:58 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:49:58 Message to Master queued w/err=0: serial=213056 error=0 06:50:03 Received message from Master: op=Filter serial=213057 06:50:03 Color wheel filter change from 0 to 0 06:50:03 FLIGetFilterPos err=0 currentPosition=0 06:50:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:03 Filter is already there-color wheel unchanged 06:50:03 Received message from Master: op=Shutter serial=213058 06:50:03 Shutter LASER open 06:50:03 Received message from Camera: op=State serial=213060 06:50:03 GetSingleValue result=40 Value=cccccccc 06:50:03 SkyScan query 06:50:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:50:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:04 Parameters OK 06:50:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:04 Set A/D data flow result=40 06:50:04 Set A/D channel type result=40 06:50:04 Set A/D encoding result=40 06:50:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:04 Set channel filter=0.000000e+000 result=40 06:50:04 Config A/D Result=40 06:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:04 Get A/D filter: -9.255963e+061 result=40 06:50:04 Get A/D value=-858993460 result=40 06:50:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:04 Parameters OK 06:50:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:04 Set A/D data flow result=40 06:50:04 Set A/D channel type result=40 06:50:04 Set A/D encoding result=40 06:50:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:04 Set channel filter=0.000000e+000 result=40 06:50:04 Config A/D Result=40 06:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:04 Get A/D filter: -9.255963e+061 result=40 06:50:04 Get A/D value=-858993460 result=40 06:50:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:04 Aux= 06:50:04 Message to Camera, serial 213060 queued 06:50:12 Received message from Master: op=Shutter serial=213070 06:50:12 Shutter LASER close 06:50:13 Received message from Master: op=PointingHead serial=213074 06:50:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:50:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:50:13 Point started: ret=0 06:50:13 point_skyscan result=0 06:50:14 Check angles 06:50:14 SkyScan query 06:50:15 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.965<-21531 Statuses=0009 0009 06:50:15 Msec=0 True Az=136.23 Ze=-142.965 Az status=0009 Ze status=0009 06:50:15 Check angles 06:50:15 SkyScan query 06:50:15 SkyScan query done: ret=0 az=154.245<-10283 ze=-121.575<-20105 Statuses=0009 0009 06:50:15 Msec=750 True Az=154.245 Ze=-121.575 Az status=0009 Ze status=0009 06:50:16 Check angles 06:50:16 SkyScan query 06:50:16 SkyScan query done: ret=0 az=171.6<-11440 ze=-100.455<-18697 Statuses=0009 0009 06:50:16 Msec=1500 True Az=171.6 Ze=-100.455 Az status=0009 Ze status=0009 06:50:16 Check angles 06:50:16 SkyScan query 06:50:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.635<-17309 Statuses=0008 0009 06:50:17 Msec=2250 True Az=176.01 Ze=-79.635 Az status=0008 Ze status=0009 06:50:17 Check angles 06:50:17 SkyScan query 06:50:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 06:50:18 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 06:50:18 Check angles 06:50:18 SkyScan query 06:50:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:50:18 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:50:18 Message to Master queued w/err=0: serial=213074 error=0 06:50:23 Received message from Master: op=Filter serial=213075 06:50:23 Color wheel filter change from 0 to 0 06:50:23 FLIGetFilterPos err=0 currentPosition=0 06:50:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:23 Filter is already there-color wheel unchanged 06:50:24 Received message from Master: op=Shutter serial=213076 06:50:24 Shutter LASER close 06:50:24 Received message from Camera: op=State serial=213078 06:50:24 GetSingleValue result=40 Value=cccccccc 06:50:24 SkyScan query 06:50:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:50:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:24 Parameters OK 06:50:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:24 Set A/D data flow result=40 06:50:24 Set A/D channel type result=40 06:50:24 Set A/D encoding result=40 06:50:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:24 Set channel filter=0.000000e+000 result=40 06:50:24 Config A/D Result=40 06:50:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:24 Get A/D filter: -9.255963e+061 result=40 06:50:24 Get A/D value=-858993460 result=40 06:50:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:24 Parameters OK 06:50:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:24 Set A/D data flow result=40 06:50:24 Set A/D channel type result=40 06:50:24 Set A/D encoding result=40 06:50:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:24 Set channel filter=0.000000e+000 result=40 06:50:24 Config A/D Result=40 06:50:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:24 Get A/D filter: -9.255963e+061 result=40 06:50:24 Get A/D value=-858993460 result=40 06:50:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:24 Aux= 06:50:24 Message to Camera, serial 213078 queued 06:51:01 Received message from Master: op=PointingHead serial=213091 06:51:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:51:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:51:01 Point started: ret=0 06:51:01 point_skyscan result=0 06:51:02 Check angles 06:51:02 SkyScan query 06:51:03 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.99<-13466 Statuses=0009 0009 06:51:03 Msec=0 True Az=153.165 Ze=-21.99 Az status=0009 Ze status=0009 06:51:03 Check angles 06:51:03 SkyScan query 06:51:04 SkyScan query done: ret=0 az=135.735<-9049 ze=-1.005<-12067 Statuses=0009 0009 06:51:04 Msec=750 True Az=135.735 Ze=-1.005 Az status=0009 Ze status=0009 06:51:04 Check angles 06:51:04 SkyScan query 06:51:04 SkyScan query done: ret=0 az=118.17<-7878 ze=19.905<-10673 Statuses=0009 0009 06:51:04 Msec=1500 True Az=118.17 Ze=19.905 Az status=0009 Ze status=0009 06:51:04 Check angles 06:51:04 SkyScan query 06:51:05 SkyScan query done: ret=0 az=100.815<-6721 ze=40.935<-9271 Statuses=0009 0009 06:51:05 Msec=2250 True Az=100.815 Ze=40.935 Az status=0009 Ze status=0009 06:51:05 Check angles 06:51:05 SkyScan query 06:51:06 SkyScan query done: ret=0 az=85.965<-5731 ze=51.6<-8560 Statuses=0009 0008 06:51:06 Msec=3000 True Az=85.965 Ze=51.6 Az status=0009 Ze status=0008 06:51:06 Check angles 06:51:06 SkyScan query 06:51:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:51:07 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 06:51:07 Message to Master queued w/err=0: serial=213091 error=0 06:51:12 Received message from Master: op=Filter serial=213092 06:51:12 Color wheel filter change from 0 to 0 06:51:12 FLIGetFilterPos err=0 currentPosition=0 06:51:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:12 Filter is already there-color wheel unchanged 06:51:12 Received message from Master: op=Shutter serial=213093 06:51:12 Shutter LASER close 06:51:12 Received message from Camera: op=State serial=213095 06:51:12 GetSingleValue result=40 Value=cccccccc 06:51:12 SkyScan query 06:51:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:51:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:12 Parameters OK 06:51:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:12 Set A/D data flow result=40 06:51:12 Set A/D channel type result=40 06:51:12 Set A/D encoding result=40 06:51:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:12 Set channel filter=0.000000e+000 result=40 06:51:12 Config A/D Result=40 06:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:12 Get A/D filter: -9.255963e+061 result=40 06:51:12 Get A/D value=-858993460 result=40 06:51:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:12 Parameters OK 06:51:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:12 Set A/D data flow result=40 06:51:12 Set A/D channel type result=40 06:51:12 Set A/D encoding result=40 06:51:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:12 Set channel filter=0.000000e+000 result=40 06:51:12 Config A/D Result=40 06:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:12 Get A/D filter: -9.255963e+061 result=40 06:51:12 Get A/D value=-858993460 result=40 06:51:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:12 Aux= 06:51:12 Message to Camera, serial 213095 queued 06:51:49 Received message from Master: op=PointingHead serial=213108 06:51:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:51:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:51:50 Point started: ret=0 06:51:50 point_skyscan result=0 06:51:50 Check angles 06:51:50 SkyScan query 06:51:51 SkyScan query done: ret=0 az=85.995<-5733 ze=21.87<-10542 Statuses=0008 0009 06:51:51 Msec=0 True Az=85.995 Ze=21.87 Az status=0008 Ze status=0009 06:51:51 Check angles 06:51:51 SkyScan query 06:51:52 SkyScan query done: ret=0 az=85.995<-5733 ze=0.51<-11966 Statuses=0008 0009 06:51:52 Msec=750 True Az=85.995 Ze=0.51 Az status=0008 Ze status=0009 06:51:52 Check angles 06:51:52 SkyScan query 06:51:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.505<-13367 Statuses=0008 0009 06:51:52 Msec=1500 True Az=85.995 Ze=-20.505 Az status=0008 Ze status=0009 06:51:53 Check angles 06:51:53 SkyScan query 06:51:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.415<-14761 Statuses=0008 0009 06:51:53 Msec=2250 True Az=85.995 Ze=-41.415 Az status=0008 Ze status=0009 06:51:53 Check angles 06:51:53 SkyScan query 06:51:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:51:54 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:51:54 Message to Master queued w/err=0: serial=213108 error=0 06:51:59 Received message from Master: op=Filter serial=213109 06:51:59 Color wheel filter change from 0 to 0 06:51:59 FLIGetFilterPos err=0 currentPosition=0 06:51:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:59 Filter is already there-color wheel unchanged 06:51:59 Received message from Master: op=Shutter serial=213110 06:51:59 Shutter LASER close 06:51:59 Received message from Camera: op=State serial=213112 06:51:59 GetSingleValue result=40 Value=cccccccc 06:51:59 SkyScan query 06:52:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:52:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:00 Parameters OK 06:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:00 Set A/D data flow result=40 06:52:00 Set A/D channel type result=40 06:52:00 Set A/D encoding result=40 06:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:00 Set channel filter=0.000000e+000 result=40 06:52:00 Config A/D Result=40 06:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:00 Get A/D filter: -9.255963e+061 result=40 06:52:00 Get A/D value=-858993460 result=40 06:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:00 Parameters OK 06:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:00 Set A/D data flow result=40 06:52:00 Set A/D channel type result=40 06:52:00 Set A/D encoding result=40 06:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:00 Set channel filter=0.000000e+000 result=40 06:52:00 Config A/D Result=40 06:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:00 Get A/D filter: -9.255963e+061 result=40 06:52:00 Get A/D value=-858993460 result=40 06:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:00 Aux= 06:52:00 Message to Camera, serial 213112 queued 06:52:37 Received message from Master: op=PointingHead serial=213125 06:52:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:52:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:52:37 Point started: ret=0 06:52:37 point_skyscan result=0 06:52:38 Check angles 06:52:38 SkyScan query 06:52:38 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.33<-17422 Statuses=0009 0009 06:52:38 Msec=0 True Az=109.125 Ze=-81.33 Az status=0009 Ze status=0009 06:52:39 Check angles 06:52:39 SkyScan query 06:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 06:52:39 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 06:52:39 Check angles 06:52:39 SkyScan query 06:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 06:52:40 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 06:52:40 Check angles 06:52:40 SkyScan query 06:52:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.165<-21611 Statuses=0008 0009 06:52:41 Msec=2250 True Az=112.995 Ze=-144.165 Az status=0008 Ze status=0009 06:52:41 Check angles 06:52:41 SkyScan query 06:52:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.135<-23009 Statuses=0008 0009 06:52:41 Msec=3000 True Az=112.995 Ze=-165.135 Az status=0008 Ze status=0009 06:52:42 Check angles 06:52:42 SkyScan query 06:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:52:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:52:42 Message to Master queued w/err=0: serial=213125 error=0 06:52:47 Received message from Master: op=Filter serial=213126 06:52:47 Color wheel filter change from 0 to 0 06:52:47 FLIGetFilterPos err=0 currentPosition=0 06:52:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:47 Filter is already there-color wheel unchanged 06:52:47 Received message from Master: op=Shutter serial=213127 06:52:47 Shutter LASER open 06:52:47 Received message from Camera: op=State serial=213129 06:52:47 GetSingleValue result=40 Value=cccccccc 06:52:47 SkyScan query 06:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:52:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:48 Parameters OK 06:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:48 Set A/D data flow result=40 06:52:48 Set A/D channel type result=40 06:52:48 Set A/D encoding result=40 06:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:48 Set channel filter=0.000000e+000 result=40 06:52:48 Config A/D Result=40 06:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:48 Get A/D filter: -9.255963e+061 result=40 06:52:48 Get A/D value=-858993460 result=40 06:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:48 Parameters OK 06:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:48 Set A/D data flow result=40 06:52:48 Set A/D channel type result=40 06:52:48 Set A/D encoding result=40 06:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:48 Set channel filter=0.000000e+000 result=40 06:52:48 Config A/D Result=40 06:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:48 Get A/D filter: -9.255963e+061 result=40 06:52:48 Get A/D value=-858993460 result=40 06:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:48 Aux= 06:52:48 Message to Camera, serial 213129 queued 06:52:56 Received message from Master: op=Shutter serial=213139 06:52:56 Shutter LASER close 06:52:57 Received message from Master: op=PointingHead serial=213143 06:52:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:52:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:52:57 Point started: ret=0 06:52:57 point_skyscan result=0 06:52:58 Check angles 06:52:58 SkyScan query 06:52:59 SkyScan query done: ret=0 az=89.88<-5992 ze=157.26<-1516 Statuses=0009 0009 06:52:59 Msec=0 True Az=89.88 Ze=157.26 Az status=0009 Ze status=0009 06:52:59 Check angles 06:52:59 SkyScan query 06:52:59 SkyScan query done: ret=0 az=72.075<-4805 ze=135.87<-2942 Statuses=0009 0009 06:52:59 Msec=750 True Az=72.075 Ze=135.87 Az status=0009 Ze status=0009 06:53:00 Check angles 06:53:00 SkyScan query 06:53:00 SkyScan query done: ret=0 az=54.345<-3623 ze=114.36<-4376 Statuses=0009 0009 06:53:00 Msec=1500 True Az=54.345 Ze=114.36 Az status=0009 Ze status=0009 06:53:00 Check angles 06:53:00 SkyScan query 06:53:01 SkyScan query done: ret=0 az=40.98<-2732 ze=93.51<-5766 Statuses=0009 0009 06:53:01 Msec=2250 True Az=40.98 Ze=93.51 Az status=0009 Ze status=0009 06:53:01 Check angles 06:53:01 SkyScan query 06:53:02 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 06:53:02 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 06:53:02 Check angles 06:53:02 SkyScan query 06:53:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 06:53:02 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 06:53:03 Check angles 06:53:03 SkyScan query 06:53:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:53:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:53:03 Message to Master queued w/err=0: serial=213143 error=0 06:53:08 Received message from Master: op=Filter serial=213144 06:53:08 Color wheel filter change from 0 to 0 06:53:08 FLIGetFilterPos err=0 currentPosition=0 06:53:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:08 Filter is already there-color wheel unchanged 06:53:08 Received message from Master: op=Shutter serial=213145 06:53:08 Shutter LASER close 06:53:08 Received message from Camera: op=State serial=213147 06:53:08 GetSingleValue result=40 Value=cccccccc 06:53:08 SkyScan query 06:53:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:53:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:09 Parameters OK 06:53:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:09 Set A/D data flow result=40 06:53:09 Set A/D channel type result=40 06:53:09 Set A/D encoding result=40 06:53:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:09 Set channel filter=0.000000e+000 result=40 06:53:09 Config A/D Result=40 06:53:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:09 Get A/D filter: -9.255963e+061 result=40 06:53:09 Get A/D value=-858993460 result=40 06:53:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:09 Parameters OK 06:53:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:09 Set A/D data flow result=40 06:53:09 Set A/D channel type result=40 06:53:09 Set A/D encoding result=40 06:53:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:09 Set channel filter=0.000000e+000 result=40 06:53:09 Config A/D Result=40 06:53:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:09 Get A/D filter: -9.255963e+061 result=40 06:53:09 Get A/D value=-858993460 result=40 06:53:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:09 Aux= 06:53:09 Message to Camera, serial 213147 queued 06:53:46 Received message from Master: op=PointingHead serial=213160 06:53:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:53:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:53:46 Point started: ret=0 06:53:46 point_skyscan result=0 06:53:47 Check angles 06:53:47 SkyScan query 06:53:48 SkyScan query done: ret=0 az=63.9<-4260 ze=66.525<-7565 Statuses=0009 0008 06:53:48 Msec=0 True Az=63.9 Ze=66.525 Az status=0009 Ze status=0008 06:53:48 Check angles 06:53:48 SkyScan query 06:53:48 SkyScan query done: ret=0 az=81.33<-5422 ze=66.51<-7566 Statuses=0009 0008 06:53:48 Msec=750 True Az=81.33 Ze=66.51 Az status=0009 Ze status=0008 06:53:48 Check angles 06:53:48 SkyScan query 06:53:49 SkyScan query done: ret=0 az=98.895<-6593 ze=66.51<-7566 Statuses=0009 0008 06:53:49 Msec=1500 True Az=98.895 Ze=66.51 Az status=0009 Ze status=0008 06:53:49 Check angles 06:53:49 SkyScan query 06:53:50 SkyScan query done: ret=0 az=116.355<-7757 ze=66.495<-7567 Statuses=0009 0008 06:53:50 Msec=2250 True Az=116.355 Ze=66.495 Az status=0009 Ze status=0008 06:53:50 Check angles 06:53:50 SkyScan query 06:53:51 SkyScan query done: ret=0 az=133.785<-8919 ze=66.495<-7567 Statuses=0009 0008 06:53:51 Msec=3000 True Az=133.785 Ze=66.495 Az status=0009 Ze status=0008 06:53:51 Check angles 06:53:51 SkyScan query 06:53:51 SkyScan query done: ret=0 az=151.2<-10080 ze=66.495<-7567 Statuses=0009 0008 06:53:51 Msec=3750 True Az=151.2 Ze=66.495 Az status=0009 Ze status=0008 06:53:51 Check angles 06:53:51 SkyScan query 06:53:52 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:53:52 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:53:52 Message to Master queued w/err=0: serial=213160 error=0 06:53:57 Received message from Master: op=Filter serial=213161 06:53:57 Color wheel filter change from 0 to 0 06:53:57 FLIGetFilterPos err=0 currentPosition=0 06:53:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:57 Filter is already there-color wheel unchanged 06:53:57 Received message from Master: op=Shutter serial=213162 06:53:57 Shutter LASER close 06:53:57 Received message from Camera: op=State serial=213164 06:53:57 GetSingleValue result=40 Value=cccccccc 06:53:57 SkyScan query 06:53:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:53:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:58 Parameters OK 06:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:58 Set A/D data flow result=40 06:53:58 Set A/D channel type result=40 06:53:58 Set A/D encoding result=40 06:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:58 Set channel filter=0.000000e+000 result=40 06:53:58 Config A/D Result=40 06:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:58 Get A/D filter: -9.255963e+061 result=40 06:53:58 Get A/D value=-858993460 result=40 06:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:58 Parameters OK 06:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:58 Set A/D data flow result=40 06:53:58 Set A/D channel type result=40 06:53:58 Set A/D encoding result=40 06:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:58 Set channel filter=0.000000e+000 result=40 06:53:58 Config A/D Result=40 06:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:58 Get A/D filter: -9.255963e+061 result=40 06:53:58 Get A/D value=-858993460 result=40 06:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:58 Aux= 06:53:58 Message to Camera, serial 213164 queued 06:54:35 Received message from Master: op=PointingHead serial=213177 06:54:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:54:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:54:35 Point started: ret=0 06:54:35 point_skyscan result=0 06:54:36 Check angles 06:54:36 SkyScan query 06:54:36 SkyScan query done: ret=0 az=134.61<-8974 ze=96.675<-5555 Statuses=0009 0009 06:54:36 Msec=0 True Az=134.61 Ze=96.675 Az status=0009 Ze status=0009 06:54:37 Check angles 06:54:37 SkyScan query 06:54:37 SkyScan query done: ret=0 az=130.995<-8733 ze=117.615<-4159 Statuses=0008 0009 06:54:37 Msec=750 True Az=130.995 Ze=117.615 Az status=0008 Ze status=0009 06:54:37 Check angles 06:54:37 SkyScan query 06:54:38 SkyScan query done: ret=0 az=130.995<-8733 ze=139.02<-2732 Statuses=0008 0009 06:54:38 Msec=1500 True Az=130.995 Ze=139.02 Az status=0008 Ze status=0009 06:54:38 Check angles 06:54:38 SkyScan query 06:54:39 SkyScan query done: ret=0 az=130.995<-8733 ze=159.975<-1335 Statuses=0008 0009 06:54:39 Msec=2250 True Az=130.995 Ze=159.975 Az status=0008 Ze status=0009 06:54:39 Check angles 06:54:39 SkyScan query 06:54:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.07<-23938 Statuses=0008 0009 06:54:39 Msec=3000 True Az=130.995 Ze=-179.07 Az status=0008 Ze status=0009 06:54:40 Check angles 06:54:40 SkyScan query 06:54:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.71<-22514 Statuses=0008 0009 06:54:40 Msec=3750 True Az=130.995 Ze=-157.71 Az status=0008 Ze status=0009 06:54:40 Check angles 06:54:40 SkyScan query 06:54:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 06:54:41 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 06:54:41 Check angles 06:54:41 SkyScan query 06:54:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 06:54:42 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 06:54:42 Message to Master queued w/err=0: serial=213177 error=0 06:54:47 Received message from Master: op=Filter serial=213178 06:54:47 Color wheel filter change from 0 to 0 06:54:47 FLIGetFilterPos err=0 currentPosition=0 06:54:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:47 Filter is already there-color wheel unchanged 06:54:47 Received message from Master: op=Shutter serial=213179 06:54:47 Shutter LASER close 06:54:47 Received message from Camera: op=State serial=213181 06:54:47 GetSingleValue result=40 Value=cccccccc 06:54:47 SkyScan query 06:54:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:54:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:48 Parameters OK 06:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:48 Set A/D data flow result=40 06:54:48 Set A/D channel type result=40 06:54:48 Set A/D encoding result=40 06:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:48 Set channel filter=0.000000e+000 result=40 06:54:48 Config A/D Result=40 06:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:48 Get A/D filter: -9.255963e+061 result=40 06:54:48 Get A/D value=-858993460 result=40 06:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:48 Parameters OK 06:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:48 Set A/D data flow result=40 06:54:48 Set A/D channel type result=40 06:54:48 Set A/D encoding result=40 06:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:48 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-17 06:54:48] 06:54:48 Config A/D Result=40 06:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:48 Get A/D filter: -9.255963e+061 result=40 06:54:48 Get A/D value=-858993460 result=40 06:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:48 Aux= 06:54:48 Message to Camera, serial 213181 queued 06:55:24 Received message from Master: op=PointingHead serial=213194 06:55:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:55:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:55:25 Point started: ret=0 06:55:25 point_skyscan result=0 06:55:25 Check angles 06:55:25 SkyScan query 06:55:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 06:55:26 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 06:55:26 Check angles 06:55:26 SkyScan query 06:55:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:55:27 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:55:27 Message to Master queued w/err=0: serial=213194 error=0 06:55:32 Received message from Master: op=Filter serial=213195 06:55:32 Color wheel filter change from 0 to 0 06:55:32 FLIGetFilterPos err=0 currentPosition=0 06:55:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:32 Filter is already there-color wheel unchanged 06:55:32 Received message from Master: op=Shutter serial=213196 06:55:32 Shutter LASER open 06:55:32 Received message from Camera: op=State serial=213198 06:55:32 GetSingleValue result=40 Value=cccccccc 06:55:32 SkyScan query 06:55:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:55:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:33 Parameters OK 06:55:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:33 Set A/D data flow result=40 06:55:33 Set A/D channel type result=40 06:55:33 Set A/D encoding result=40 06:55:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:33 Set channel filter=0.000000e+000 result=40 06:55:33 Config A/D Result=40 06:55:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:33 Get A/D filter: -9.255963e+061 result=40 06:55:33 Get A/D value=-858993460 result=40 06:55:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:33 Parameters OK 06:55:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:33 Set A/D data flow result=40 06:55:33 Set A/D channel type result=40 06:55:33 Set A/D encoding result=40 06:55:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:33 Set channel filter=0.000000e+000 result=40 06:55:33 Config A/D Result=40 06:55:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:33 Get A/D filter: -9.255963e+061 result=40 06:55:33 Get A/D value=-858993460 result=40 06:55:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:33 Aux= 06:55:33 Message to Camera, serial 213198 queued 06:55:41 Received message from Master: op=Shutter serial=213208 06:55:41 Shutter LASER close 06:55:42 Received message from Master: op=PointingHead serial=213212 06:55:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:55:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:55:42 Point started: ret=0 06:55:42 point_skyscan result=0 06:55:43 Check angles 06:55:43 SkyScan query 06:55:43 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.8<-21520 Statuses=0009 0009 06:55:43 Msec=0 True Az=136.395 Ze=-142.8 Az status=0009 Ze status=0009 06:55:44 Check angles 06:55:44 SkyScan query 06:55:44 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.815<-20121 Statuses=0009 0009 06:55:44 Msec=750 True Az=153.795 Ze=-121.815 Az status=0009 Ze status=0009 06:55:44 Check angles 06:55:44 SkyScan query 06:55:45 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.86<-18724 Statuses=0009 0009 06:55:45 Msec=1500 True Az=171.3 Ze=-100.86 Az status=0009 Ze status=0009 06:55:45 Check angles 06:55:45 SkyScan query 06:55:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.95<-17330 Statuses=0008 0009 06:55:46 Msec=2250 True Az=176.01 Ze=-79.95 Az status=0008 Ze status=0009 06:55:46 Check angles 06:55:46 SkyScan query 06:55:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 06:55:46 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 06:55:47 Check angles 06:55:47 SkyScan query 06:55:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 06:55:47 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 06:55:47 Message to Master queued w/err=0: serial=213212 error=0 06:55:52 Received message from Master: op=Filter serial=213213 06:55:52 Color wheel filter change from 0 to 0 06:55:52 FLIGetFilterPos err=0 currentPosition=0 06:55:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:52 Filter is already there-color wheel unchanged [UTC 2018-12-17 06:55:52] 06:55:52 Received message from Master: op=Shutter serial=213214 06:55:52 Shutter LASER close 06:55:53 Received message from Camera: op=State serial=213216 06:55:53 GetSingleValue result=40 Value=cccccccc 06:55:53 SkyScan query 06:55:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:55:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:53 Parameters OK 06:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:53 Set A/D data flow result=40 06:55:53 Set A/D channel type result=40 06:55:53 Set A/D encoding result=40 06:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:53 Set channel filter=0.000000e+000 result=40 06:55:53 Config A/D Result=40 06:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:53 Get A/D filter: -9.255963e+061 result=40 06:55:53 Get A/D value=-858993460 result=40 06:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:53 Parameters OK 06:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:53 Set A/D data flow result=40 06:55:53 Set A/D channel type result=40 06:55:53 Set A/D encoding result=40 06:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:53 Set channel filter=0.000000e+000 result=40 06:55:53 Config A/D Result=40 06:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:53 Get A/D filter: -9.255963e+061 result=40 06:55:53 Get A/D value=-858993460 result=40 06:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:53 Aux= 06:55:53 Message to Camera, serial 213216 queued 06:56:30 Received message from Master: op=PointingHead serial=213229 06:56:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:56:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:56:30 Point started: ret=0 06:56:30 point_skyscan result=0 06:56:31 Check angles 06:56:31 SkyScan query 06:56:32 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.195<-13413 Statuses=0009 0009 06:56:32 Msec=0 True Az=152.565 Ze=-21.195 Az status=0009 Ze status=0009 06:56:32 Check angles 06:56:32 SkyScan query 06:56:32 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.21<-12014 Statuses=0009 0009 06:56:32 Msec=750 True Az=135.03 Ze=-0.21 Az status=0009 Ze status=0009 06:56:33 Check angles 06:56:33 SkyScan query 06:56:33 SkyScan query done: ret=0 az=117.12<-7808 ze=21.18<-10588 Statuses=0009 0009 06:56:33 Msec=1500 True Az=117.12 Ze=21.18 Az status=0009 Ze status=0009 06:56:33 Check angles 06:56:33 SkyScan query 06:56:34 SkyScan query done: ret=0 az=99.39<-6626 ze=42.465<-9169 Statuses=0009 0009 06:56:34 Msec=2250 True Az=99.39 Ze=42.465 Az status=0009 Ze status=0009 06:56:34 Check angles 06:56:34 SkyScan query 06:56:35 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 06:56:35 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 06:56:35 Check angles 06:56:35 SkyScan query 06:56:35 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 06:56:35 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 06:56:35 Message to Master queued w/err=0: serial=213229 error=0 06:56:40 Received message from Master: op=Filter serial=213230 06:56:40 Color wheel filter change from 0 to 0 06:56:40 FLIGetFilterPos err=0 currentPosition=0 06:56:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:40 Filter is already there-color wheel unchanged 06:56:41 Received message from Master: op=Shutter serial=213231 06:56:41 Shutter LASER close 06:56:41 Received message from Camera: op=State serial=213233 06:56:41 GetSingleValue result=40 Value=cccccccc 06:56:41 SkyScan query 06:56:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:56:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:41 Parameters OK 06:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:41 Set A/D data flow result=40 06:56:41 Set A/D channel type result=40 06:56:41 Set A/D encoding result=40 06:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:41 Set channel filter=0.000000e+000 result=40 06:56:41 Config A/D Result=40 06:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:41 Get A/D filter: -9.255963e+061 result=40 06:56:41 Get A/D value=-858993460 result=40 06:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:41 Parameters OK 06:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:41 Set A/D data flow result=40 06:56:41 Set A/D channel type result=40 06:56:41 Set A/D encoding result=40 06:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:41 Set channel filter=0.000000e+000 result=40 06:56:41 Config A/D Result=40 06:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:41 Get A/D filter: -9.255963e+061 result=40 06:56:41 Get A/D value=-858993460 result=40 06:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:41 Aux= 06:56:41 Message to Camera, serial 213233 queued 06:57:17 Received message from Master: op=PointingHead serial=213245 06:57:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:57:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:57:18 Point started: ret=0 06:57:18 point_skyscan result=0 06:57:18 Check angles 06:57:18 SkyScan query 06:57:19 SkyScan query done: ret=0 az=85.995<-5733 ze=21.54<-10564 Statuses=0008 0009 06:57:19 Msec=0 True Az=85.995 Ze=21.54 Az status=0008 Ze status=0009 06:57:19 Check angles 06:57:19 SkyScan query 06:57:20 SkyScan query done: ret=0 az=85.995<-5733 ze=0.63<-11958 Statuses=0008 0009 06:57:20 Msec=750 True Az=85.995 Ze=0.63 Az status=0008 Ze status=0009 06:57:20 Check angles 06:57:20 SkyScan query 06:57:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.37<-13358 Statuses=0008 0009 06:57:21 Msec=1500 True Az=85.995 Ze=-20.37 Az status=0008 Ze status=0009 06:57:21 Check angles 06:57:21 SkyScan query 06:57:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.265<-14751 Statuses=0008 0009 06:57:21 Msec=2250 True Az=85.995 Ze=-41.265 Az status=0008 Ze status=0009 06:57:21 Check angles 06:57:21 SkyScan query 06:57:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 06:57:22 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 06:57:22 Message to Master queued w/err=0: serial=213245 error=0 06:57:27 Received message from Master: op=Filter serial=213246 06:57:27 Color wheel filter change from 0 to 0 06:57:27 FLIGetFilterPos err=0 currentPosition=0 06:57:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:27 Filter is already there-color wheel unchanged 06:57:27 Received message from Master: op=Shutter serial=213247 06:57:27 Shutter LASER close 06:57:27 Received message from Camera: op=State serial=213249 06:57:27 GetSingleValue result=40 Value=cccccccc 06:57:27 SkyScan query 06:57:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:57:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:28 Parameters OK 06:57:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:28 Set A/D data flow result=40 06:57:28 Set A/D channel type result=40 06:57:28 Set A/D encoding result=40 06:57:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:28 Set channel filter=0.000000e+000 result=40 06:57:28 Config A/D Result=40 06:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:28 Get A/D filter: -9.255963e+061 result=40 06:57:28 Get A/D value=-858993460 result=40 06:57:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:28 Parameters OK 06:57:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:28 Set A/D data flow result=40 06:57:28 Set A/D channel type result=40 06:57:28 Set A/D encoding result=40 06:57:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:28 Set channel filter=0.000000e+000 result=40 06:57:28 Config A/D Result=40 06:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:28 Get A/D filter: -9.255963e+061 result=40 06:57:28 Get A/D value=-858993460 result=40 06:57:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:28 Aux= 06:57:28 Message to Camera, serial 213249 queued 06:58:05 Received message from Master: op=PointingHead serial=213262 06:58:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:58:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:58:05 Point started: ret=0 06:58:05 point_skyscan result=0 06:58:06 Check angles 06:58:06 SkyScan query 06:58:06 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.285<-17419 Statuses=0009 0009 06:58:06 Msec=0 True Az=109.02 Ze=-81.285 Az status=0009 Ze status=0009 06:58:07 Check angles 06:58:07 SkyScan query 06:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 06:58:07 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 06:58:07 Check angles 06:58:07 SkyScan query 06:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 06:58:08 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 06:58:08 Check angles 06:58:08 SkyScan query 06:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 06:58:09 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 06:58:09 Check angles 06:58:09 SkyScan query 06:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 06:58:09 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 06:58:10 Check angles 06:58:10 SkyScan query 06:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:58:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:58:10 Message to Master queued w/err=0: serial=213262 error=0 06:58:15 Received message from Master: op=Filter serial=213263 06:58:15 Color wheel filter change from 0 to 0 06:58:15 FLIGetFilterPos err=0 currentPosition=0 06:58:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:15 Filter is already there-color wheel unchanged 06:58:15 Received message from Master: op=Shutter serial=213264 06:58:15 Shutter LASER open 06:58:15 Received message from Camera: op=State serial=213266 06:58:15 GetSingleValue result=40 Value=cccccccc 06:58:15 SkyScan query 06:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:58:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:16 Parameters OK 06:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:16 Set A/D data flow result=40 06:58:16 Set A/D channel type result=40 06:58:16 Set A/D encoding result=40 06:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:16 Set channel filter=0.000000e+000 result=40 06:58:16 Config A/D Result=40 06:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:16 Get A/D filter: -9.255963e+061 result=40 06:58:16 Get A/D value=-858993460 result=40 06:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:16 Parameters OK 06:58:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:16 Set A/D data flow result=40 06:58:16 Set A/D channel type result=40 06:58:16 Set A/D encoding result=40 06:58:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:16 Set channel filter=0.000000e+000 result=40 06:58:16 Config A/D Result=40 06:58:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:16 Get A/D filter: -9.255963e+061 result=40 06:58:16 Get A/D value=-858993460 result=40 06:58:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:16 Aux= 06:58:16 Message to Camera, serial 213266 queued 06:58:24 Received message from Master: op=Shutter serial=213276 06:58:24 Shutter LASER close 06:58:25 Received message from Master: op=PointingHead serial=213280 06:58:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:58:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:58:25 Point started: ret=0 06:58:25 point_skyscan result=0 06:58:26 Check angles 06:58:26 SkyScan query 06:58:27 SkyScan query done: ret=0 az=90.18<-6012 ze=157.5<-1500 Statuses=0009 0009 06:58:27 Msec=0 True Az=90.18 Ze=157.5 Az status=0009 Ze status=0009 06:58:27 Check angles 06:58:27 SkyScan query 06:58:27 SkyScan query done: ret=0 az=72.285<-4819 ze=136.125<-2925 Statuses=0009 0009 06:58:27 Msec=750 True Az=72.285 Ze=136.125 Az status=0009 Ze status=0009 06:58:27 Check angles 06:58:27 SkyScan query 06:58:28 SkyScan query done: ret=0 az=54.99<-3666 ze=115.14<-4324 Statuses=0009 0009 06:58:28 Msec=1500 True Az=54.99 Ze=115.14 Az status=0009 Ze status=0009 06:58:28 Check angles 06:58:28 SkyScan query 06:58:29 SkyScan query done: ret=0 az=40.95<-2730 ze=94.2<-5720 Statuses=0009 0009 06:58:29 Msec=2250 True Az=40.95 Ze=94.2 Az status=0009 Ze status=0009 06:58:29 Check angles 06:58:29 SkyScan query 06:58:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 06:58:30 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 06:58:30 Check angles 06:58:30 SkyScan query 06:58:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.215<-8519 Statuses=0008 0009 06:58:30 Msec=3750 True Az=40.995 Ze=52.215 Az status=0008 Ze status=0009 06:58:31 Check angles 06:58:31 SkyScan query 06:58:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:58:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:58:31 Message to Master queued w/err=0: serial=213280 error=0 06:58:36 Received message from Master: op=Filter serial=213281 06:58:36 Color wheel filter change from 0 to 0 06:58:36 FLIGetFilterPos err=0 currentPosition=0 06:58:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:36 Filter is already there-color wheel unchanged 06:58:36 Received message from Master: op=Shutter serial=213282 06:58:36 Shutter LASER close 06:58:36 Received message from Camera: op=State serial=213284 06:58:36 GetSingleValue result=40 Value=cccccccc 06:58:36 SkyScan query 06:58:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:58:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:37 Parameters OK 06:58:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:37 Set A/D data flow result=40 06:58:37 Set A/D channel type result=40 06:58:37 Set A/D encoding result=40 06:58:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:37 Set channel filter=0.000000e+000 result=40 06:58:37 Config A/D Result=40 06:58:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:37 Get A/D filter: -9.255963e+061 result=40 06:58:37 Get A/D value=-858993460 result=40 06:58:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:37 Parameters OK 06:58:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:37 Set A/D data flow result=40 06:58:37 Set A/D channel type result=40 06:58:37 Set A/D encoding result=40 06:58:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:37 Set channel filter=0.000000e+000 result=40 06:58:37 Config A/D Result=40 06:58:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:37 Get A/D filter: -9.255963e+061 result=40 06:58:37 Get A/D value=-858993460 result=40 06:58:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:37 Aux= 06:58:37 Message to Camera, serial 213284 queued 06:59:14 Received message from Master: op=PointingHead serial=213297 06:59:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:59:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:59:14 Point started: ret=0 06:59:14 point_skyscan result=0 06:59:15 Check angles 06:59:15 SkyScan query 06:59:16 SkyScan query done: ret=0 az=64.02<-4268 ze=66.51<-7566 Statuses=0009 0008 06:59:16 Msec=0 True Az=64.02 Ze=66.51 Az status=0009 Ze status=0008 06:59:16 Check angles 06:59:16 SkyScan query 06:59:16 SkyScan query done: ret=0 az=81.39<-5426 ze=66.51<-7566 Statuses=0009 0008 06:59:16 Msec=750 True Az=81.39 Ze=66.51 Az status=0009 Ze status=0008 06:59:16 Check angles 06:59:16 SkyScan query 06:59:17 SkyScan query done: ret=0 az=98.94<-6596 ze=66.51<-7566 Statuses=0009 0008 06:59:17 Msec=1500 True Az=98.94 Ze=66.51 Az status=0009 Ze status=0008 06:59:17 Check angles 06:59:17 SkyScan query 06:59:18 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 06:59:18 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 06:59:18 Check angles 06:59:18 SkyScan query 06:59:19 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 06:59:19 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 06:59:19 Check angles 06:59:19 SkyScan query 06:59:19 SkyScan query done: ret=0 az=151.95<-10130 ze=66.495<-7567 Statuses=0009 0008 06:59:19 Msec=3750 True Az=151.95 Ze=66.495 Az status=0009 Ze status=0008 06:59:19 Check angles 06:59:19 SkyScan query 06:59:20 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:59:20 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:59:20 Message to Master queued w/err=0: serial=213297 error=0 06:59:25 Received message from Master: op=Filter serial=213298 06:59:25 Color wheel filter change from 0 to 0 06:59:25 FLIGetFilterPos err=0 currentPosition=0 06:59:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:25 Filter is already there-color wheel unchanged 06:59:25 Received message from Master: op=Shutter serial=213299 06:59:25 Shutter LASER close 06:59:25 Received message from Camera: op=State serial=213301 06:59:25 GetSingleValue result=40 Value=cccccccc 06:59:25 SkyScan query 06:59:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:59:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:26 Parameters OK 06:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:26 Set A/D data flow result=40 06:59:26 Set A/D channel type result=40 06:59:26 Set A/D encoding result=40 06:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:26 Set channel filter=0.000000e+000 result=40 06:59:26 Config A/D Result=40 06:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:26 Get A/D filter: -9.255963e+061 result=40 06:59:26 Get A/D value=-858993460 result=40 06:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:26 Parameters OK 06:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:26 Set A/D data flow result=40 06:59:26 Set A/D channel type result=40 06:59:26 Set A/D encoding result=40 06:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:26 Set channel filter=0.000000e+000 result=40 06:59:26 Config A/D Result=40 06:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:26 Get A/D filter: -9.255963e+061 result=40 06:59:26 Get A/D value=-858993460 result=40 06:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:26 Aux= 06:59:26 Message to Camera, serial 213301 queued 07:00:03 Received message from Master: op=PointingHead serial=213314 07:00:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:00:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:00:03 Point started: ret=0 07:00:03 point_skyscan result=0 07:00:04 Check angles 07:00:04 SkyScan query 07:00:04 SkyScan query done: ret=0 az=135.195<-9013 ze=96.09<-5594 Statuses=0009 0009 07:00:04 Msec=0 True Az=135.195 Ze=96.09 Az status=0009 Ze status=0009 07:00:05 Check angles 07:00:05 SkyScan query 07:00:05 SkyScan query done: ret=0 az=130.995<-8733 ze=117.03<-4198 Statuses=0008 0009 07:00:05 Msec=750 True Az=130.995 Ze=117.03 Az status=0008 Ze status=0009 07:00:05 Check angles 07:00:05 SkyScan query 07:00:06 SkyScan query done: ret=0 az=130.995<-8733 ze=137.94<-2804 Statuses=0008 0009 07:00:06 Msec=1500 True Az=130.995 Ze=137.94 Az status=0008 Ze status=0009 07:00:06 Check angles 07:00:06 SkyScan query 07:00:07 SkyScan query done: ret=0 az=130.995<-8733 ze=158.91<-1406 Statuses=0008 0009 07:00:07 Msec=2250 True Az=130.995 Ze=158.91 Az status=0008 Ze status=0009 07:00:07 Check angles 07:00:07 SkyScan query 07:00:07 SkyScan query done: ret=0 az=130.995<-8733 ze=179.835<-11 Statuses=0008 0009 07:00:07 Msec=3000 True Az=130.995 Ze=179.835 Az status=0008 Ze status=0009 07:00:08 Check angles 07:00:08 SkyScan query 07:00:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-159.165<-22611 Statuses=0008 0009 07:00:08 Msec=3750 True Az=130.995 Ze=-159.165 Az status=0008 Ze status=0009 07:00:08 Check angles 07:00:08 SkyScan query 07:00:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 07:00:09 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 07:00:09 Check angles 07:00:09 SkyScan query 07:00:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:00:10 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:00:10 Message to Master queued w/err=0: serial=213314 error=0 07:00:15 Received message from Master: op=Filter serial=213315 07:00:15 Color wheel filter change from 0 to 0 07:00:15 FLIGetFilterPos err=0 currentPosition=0 07:00:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:15 Filter is already there-color wheel unchanged 07:00:15 Received message from Master: op=Shutter serial=213316 07:00:15 Shutter LASER close 07:00:15 Received message from Camera: op=State serial=213318 07:00:15 GetSingleValue result=40 Value=cccccccc 07:00:15 SkyScan query 07:00:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:00:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:16 Parameters OK 07:00:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:16 Set A/D data flow result=40 07:00:16 Set A/D channel type result=40 07:00:16 Set A/D encoding result=40 07:00:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:16 Set channel filter=0.000000e+000 result=40 07:00:16 Config A/D Result=40 07:00:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:16 Get A/D filter: -9.255963e+061 result=40 07:00:16 Get A/D value=-858993460 result=40 07:00:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:16 Parameters OK 07:00:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:16 Set A/D data flow result=40 07:00:16 Set A/D channel type result=40 07:00:16 Set A/D encoding result=40 07:00:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:16 Set channel filter=0.000000e+000 result=40 07:00:16 Config A/D Result=40 07:00:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:16 Get A/D filter: -9.255963e+061 result=40 07:00:16 Get A/D value=-858993460 result=40 07:00:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:16 Aux= 07:00:16 Message to Camera, serial 213318 queued 07:00:52 Received message from Master: op=PointingHead serial=213331 07:00:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:00:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:00:53 Point started: ret=0 07:00:53 point_skyscan result=0 07:00:53 Check angles 07:00:53 SkyScan query 07:00:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 07:00:54 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 07:00:54 Check angles 07:00:54 SkyScan query 07:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:00:55 Msec=750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:00:55 Message to Master queued w/err=0: serial=213331 error=0 07:01:00 Received message from Master: op=Filter serial=213332 07:01:00 Color wheel filter change from 0 to 0 07:01:00 FLIGetFilterPos err=0 currentPosition=0 07:01:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:00 Filter is already there-color wheel unchanged 07:01:00 Received message from Master: op=Shutter serial=213333 07:01:00 Shutter LASER open 07:01:00 Received message from Camera: op=State serial=213335 07:01:00 GetSingleValue result=40 Value=cccccccc 07:01:00 SkyScan query 07:01:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:01:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:01 Parameters OK 07:01:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:01 Set A/D data flow result=40 07:01:01 Set A/D channel type result=40 07:01:01 Set A/D encoding result=40 07:01:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:01 Set channel filter=0.000000e+000 result=40 07:01:01 Config A/D Result=40 07:01:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:01 Get A/D filter: -9.255963e+061 result=40 07:01:01 Get A/D value=-858993460 result=40 07:01:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:01 Parameters OK 07:01:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:01 Set A/D data flow result=40 07:01:01 Set A/D channel type result=40 07:01:01 Set A/D encoding result=40 07:01:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:01 Set channel filter=0.000000e+000 result=40 07:01:01 Config A/D Result=40 07:01:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:01 Get A/D filter: -9.255963e+061 result=40 07:01:01 Get A/D value=-858993460 result=40 07:01:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:01 Aux= 07:01:01 Message to Camera, serial 213335 queued 07:01:09 Received message from Master: op=Shutter serial=213345 07:01:09 Shutter LASER close 07:01:10 Received message from Master: op=PointingHead serial=213349 07:01:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:01:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:01:10 Point started: ret=0 07:01:10 point_skyscan result=0 07:01:11 Check angles 07:01:11 SkyScan query 07:01:11 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.905<-21527 Statuses=0009 0009 07:01:11 Msec=0 True Az=136.38 Ze=-142.905 Az status=0009 Ze status=0009 07:01:12 Check angles 07:01:12 SkyScan query 07:01:12 SkyScan query done: ret=0 az=154.17<-10278 ze=-121.53<-20102 Statuses=0009 0009 07:01:12 Msec=750 True Az=154.17 Ze=-121.53 Az status=0009 Ze status=0009 07:01:12 Check angles 07:01:12 SkyScan query 07:01:13 SkyScan query done: ret=0 az=171.645<-11443 ze=-100.44<-18696 Statuses=0009 0009 07:01:13 Msec=1500 True Az=171.645 Ze=-100.44 Az status=0009 Ze status=0009 07:01:13 Check angles 07:01:13 SkyScan query 07:01:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.11<-17274 Statuses=0008 0009 07:01:14 Msec=2250 True Az=176.01 Ze=-79.11 Az status=0008 Ze status=0009 07:01:14 Check angles 07:01:14 SkyScan query 07:01:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-57.795<-15853 Statuses=0008 0009 07:01:15 Msec=3000 True Az=175.995 Ze=-57.795 Az status=0008 Ze status=0009 07:01:15 Check angles 07:01:15 SkyScan query 07:01:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 07:01:15 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 07:01:15 Message to Master queued w/err=0: serial=213349 error=0 07:01:20 Received message from Master: op=Filter serial=213350 07:01:20 Color wheel filter change from 0 to 0 07:01:20 FLIGetFilterPos err=0 currentPosition=0 07:01:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:20 Filter is already there-color wheel unchanged 07:01:20 Received message from Master: op=Shutter serial=213351 07:01:20 Shutter LASER close 07:01:21 Received message from Camera: op=State serial=213353 07:01:21 GetSingleValue result=40 Value=cccccccc 07:01:21 SkyScan query 07:01:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.495<-15433 Statuses=0008 0008 07:01:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:21 Parameters OK 07:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:21 Set A/D data flow result=40 07:01:21 Set A/D channel type result=40 07:01:21 Set A/D encoding result=40 07:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:21 Set channel filter=0.000000e+000 result=40 07:01:21 Config A/D Result=40 07:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:21 Get A/D filter: -9.255963e+061 result=40 07:01:21 Get A/D value=-858993460 result=40 07:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:21 Parameters OK 07:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:21 Set A/D data flow result=40 07:01:21 Set A/D channel type result=40 07:01:21 Set A/D encoding result=40 07:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:21 Set channel filter=0.000000e+000 result=40 07:01:21 Config A/D Result=40 07:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:21 Get A/D filter: -9.255963e+061 result=40 07:01:21 Get A/D value=-858993460 result=40 07:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:21 PH type=1 Digital in=000000 Instrument Az=176.009995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:21 Aux= 07:01:21 Message to Camera, serial 213353 queued 07:01:58 Received message from Master: op=PointingHead serial=213366 07:01:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:01:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:01:58 Point started: ret=0 07:01:58 point_skyscan result=0 07:01:59 Check angles 07:01:59 SkyScan query 07:02:00 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.825<-13455 Statuses=0009 0009 07:02:00 Msec=0 True Az=152.97 Ze=-21.825 Az status=0009 Ze status=0009 07:02:00 Check angles 07:02:00 SkyScan query 07:02:00 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.345<-12023 Statuses=0009 0009 07:02:00 Msec=750 True Az=135.3 Ze=-0.345 Az status=0009 Ze status=0009 07:02:01 Check angles 07:02:01 SkyScan query 07:02:01 SkyScan query done: ret=0 az=117.75<-7850 ze=20.55<-10630 Statuses=0009 0009 07:02:01 Msec=1500 True Az=117.75 Ze=20.55 Az status=0009 Ze status=0009 07:02:01 Check angles 07:02:01 SkyScan query 07:02:02 SkyScan query done: ret=0 az=100.35<-6690 ze=41.55<-9230 Statuses=0009 0009 07:02:02 Msec=2250 True Az=100.35 Ze=41.55 Az status=0009 Ze status=0009 07:02:02 Check angles 07:02:02 SkyScan query 07:02:03 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 07:02:03 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 07:02:03 Check angles 07:02:03 SkyScan query 07:02:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:02:03 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:02:03 Message to Master queued w/err=0: serial=213366 error=0 07:02:08 Received message from Master: op=Filter serial=213367 07:02:08 Color wheel filter change from 0 to 0 07:02:08 FLIGetFilterPos err=0 currentPosition=0 07:02:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:08 Filter is already there-color wheel unchanged 07:02:09 Received message from Master: op=Shutter serial=213368 07:02:09 Shutter LASER close 07:02:09 Received message from Camera: op=State serial=213370 07:02:09 GetSingleValue result=40 Value=cccccccc 07:02:09 SkyScan query 07:02:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:02:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:09 Parameters OK 07:02:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:09 Set A/D data flow result=40 07:02:09 Set A/D channel type result=40 07:02:09 Set A/D encoding result=40 07:02:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:09 Set channel filter=0.000000e+000 result=40 07:02:09 Config A/D Result=40 07:02:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:09 Get A/D filter: -9.255963e+061 result=40 07:02:09 Get A/D value=-858993460 result=40 07:02:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:09 Parameters OK 07:02:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:09 Set A/D data flow result=40 07:02:09 Set A/D channel type result=40 07:02:09 Set A/D encoding result=40 07:02:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:09 Set channel filter=0.000000e+000 result=40 07:02:09 Config A/D Result=40 07:02:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:09 Get A/D filter: -9.255963e+061 result=40 07:02:09 Get A/D value=-858993460 result=40 07:02:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:09 Aux= 07:02:09 Message to Camera, serial 213370 queued 07:02:46 Received message from Master: op=PointingHead serial=213383 07:02:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:02:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:02:47 Point started: ret=0 07:02:47 point_skyscan result=0 07:02:47 Check angles 07:02:47 SkyScan query 07:02:48 SkyScan query done: ret=0 az=85.995<-5733 ze=21.225<-10585 Statuses=0008 0009 07:02:48 Msec=0 True Az=85.995 Ze=21.225 Az status=0008 Ze status=0009 07:02:48 Check angles 07:02:48 SkyScan query 07:02:49 SkyScan query done: ret=0 az=85.995<-5733 ze=0.255<-11983 Statuses=0008 0009 07:02:49 Msec=750 True Az=85.995 Ze=0.255 Az status=0008 Ze status=0009 07:02:49 Check angles 07:02:49 SkyScan query 07:02:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.7<-13380 Statuses=0008 0009 07:02:49 Msec=1500 True Az=85.995 Ze=-20.7 Az status=0008 Ze status=0009 07:02:50 Check angles 07:02:50 SkyScan query 07:02:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-42.105<-14807 Statuses=0008 0009 07:02:50 Msec=2250 True Az=85.995 Ze=-42.105 Az status=0008 Ze status=0009 07:02:50 Check angles 07:02:50 SkyScan query 07:02:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:02:51 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:02:51 Message to Master queued w/err=0: serial=213383 error=0 07:02:56 Received message from Master: op=Filter serial=213384 07:02:56 Color wheel filter change from 0 to 0 07:02:56 FLIGetFilterPos err=0 currentPosition=0 07:02:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:56 Filter is already there-color wheel unchanged 07:02:56 Received message from Master: op=Shutter serial=213385 07:02:56 Shutter LASER close 07:02:56 Received message from Camera: op=State serial=213387 07:02:56 GetSingleValue result=40 Value=cccccccc 07:02:56 SkyScan query 07:02:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:02:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:57 Parameters OK 07:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:57 Set A/D data flow result=40 07:02:57 Set A/D channel type result=40 07:02:57 Set A/D encoding result=40 07:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:57 Set channel filter=0.000000e+000 result=40 07:02:57 Config A/D Result=40 07:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:57 Get A/D filter: -9.255963e+061 result=40 07:02:57 Get A/D value=-858993460 result=40 07:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:57 Parameters OK 07:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:57 Set A/D data flow result=40 07:02:57 Set A/D channel type result=40 07:02:57 Set A/D encoding result=40 07:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:57 Set channel filter=0.000000e+000 result=40 07:02:57 Config A/D Result=40 07:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:57 Get A/D filter: -9.255963e+061 result=40 07:02:57 Get A/D value=-858993460 result=40 07:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:57 Aux= 07:02:57 Message to Camera, serial 213387 queued 07:03:34 Received message from Master: op=PointingHead serial=213400 07:03:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:03:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:03:34 Point started: ret=0 07:03:34 point_skyscan result=0 07:03:35 Check angles 07:03:35 SkyScan query 07:03:35 SkyScan query done: ret=0 az=109.455<-7297 ze=-81.84<-17456 Statuses=0009 0009 07:03:35 Msec=0 True Az=109.455 Ze=-81.84 Az status=0009 Ze status=0009 07:03:35 Check angles 07:03:35 SkyScan query 07:03:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.215<-18881 Statuses=0008 0009 07:03:36 Msec=750 True Az=112.995 Ze=-103.215 Az status=0008 Ze status=0009 07:03:36 Check angles 07:03:36 SkyScan query 07:03:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.155<-20277 Statuses=0008 0009 07:03:37 Msec=1500 True Az=112.995 Ze=-124.155 Az status=0008 Ze status=0009 07:03:37 Check angles 07:03:37 SkyScan query 07:03:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.62<-21708 Statuses=0008 0009 07:03:38 Msec=2250 True Az=112.995 Ze=-145.62 Az status=0008 Ze status=0009 07:03:38 Check angles 07:03:38 SkyScan query 07:03:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.98<-23132 Statuses=0008 0009 07:03:38 Msec=3000 True Az=112.995 Ze=-166.98 Az status=0008 Ze status=0009 07:03:39 Check angles 07:03:39 SkyScan query 07:03:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:03:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:03:39 Message to Master queued w/err=0: serial=213400 error=0 07:03:44 Received message from Master: op=Filter serial=213401 07:03:44 Color wheel filter change from 0 to 0 07:03:44 FLIGetFilterPos err=0 currentPosition=0 07:03:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:44 Filter is already there-color wheel unchanged 07:03:44 Received message from Master: op=Shutter serial=213402 07:03:44 Shutter LASER open 07:03:44 Received message from Camera: op=State serial=213404 07:03:44 GetSingleValue result=40 Value=cccccccc 07:03:44 SkyScan query 07:03:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:03:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:45 Parameters OK 07:03:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:45 Set A/D data flow result=40 07:03:45 Set A/D channel type result=40 07:03:45 Set A/D encoding result=40 07:03:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:45 Set channel filter=0.000000e+000 result=40 07:03:45 Config A/D Result=40 07:03:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:45 Get A/D filter: -9.255963e+061 result=40 07:03:45 Get A/D value=-858993460 result=40 07:03:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:45 Parameters OK 07:03:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:45 Set A/D data flow result=40 07:03:45 Set A/D channel type result=40 07:03:45 Set A/D encoding result=40 07:03:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:45 Set channel filter=0.000000e+000 result=40 07:03:45 Config A/D Result=40 07:03:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:45 Get A/D filter: -9.255963e+061 result=40 07:03:45 Get A/D value=-858993460 result=40 07:03:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:45 Aux= 07:03:45 Message to Camera, serial 213404 queued 07:03:53 Received message from Master: op=Shutter serial=213414 07:03:53 Shutter LASER close 07:03:54 Received message from Master: op=PointingHead serial=213418 07:03:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:03:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:03:54 Point started: ret=0 07:03:54 point_skyscan result=0 07:03:55 Check angles 07:03:55 SkyScan query 07:03:56 SkyScan query done: ret=0 az=90.18<-6012 ze=157.5<-1500 Statuses=0009 0009 07:03:56 Msec=0 True Az=90.18 Ze=157.5 Az status=0009 Ze status=0009 07:03:56 Check angles 07:03:56 SkyScan query 07:03:56 SkyScan query done: ret=0 az=72.72<-4848 ze=136.56<-2896 Statuses=0009 0009 07:03:56 Msec=750 True Az=72.72 Ze=136.56 Az status=0009 Ze status=0009 07:03:56 Check angles 07:03:56 SkyScan query 07:03:57 SkyScan query done: ret=0 az=55.32<-3688 ze=115.635<-4291 Statuses=0009 0009 07:03:57 Msec=1500 True Az=55.32 Ze=115.635 Az status=0009 Ze status=0009 07:03:57 Check angles 07:03:57 SkyScan query 07:03:58 SkyScan query done: ret=0 az=40.95<-2730 ze=94.65<-5690 Statuses=0009 0009 07:03:58 Msec=2250 True Az=40.95 Ze=94.65 Az status=0009 Ze status=0009 07:03:58 Check angles 07:03:58 SkyScan query 07:03:59 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 07:03:59 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 07:03:59 Check angles 07:03:59 SkyScan query 07:03:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 07:03:59 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 07:03:59 Check angles 07:03:59 SkyScan query 07:04:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:04:00 Msec=4500 True Az=40.995 Ze=51.495 Az status=0008 Ze status=0008 07:04:00 Message to Master queued w/err=0: serial=213418 error=0 07:04:05 Received message from Master: op=Filter serial=213419 07:04:05 Color wheel filter change from 0 to 0 07:04:05 FLIGetFilterPos err=0 currentPosition=0 07:04:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:05 Filter is already there-color wheel unchanged 07:04:05 Received message from Master: op=Shutter serial=213420 07:04:05 Shutter LASER close 07:04:05 Received message from Camera: op=State serial=213422 07:04:05 GetSingleValue result=40 Value=cccccccc 07:04:05 SkyScan query 07:04:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.51<-8566 Statuses=0008 0008 07:04:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:06 Parameters OK 07:04:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:06 Set A/D data flow result=40 07:04:06 Set A/D channel type result=40 07:04:06 Set A/D encoding result=40 07:04:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:06 Set channel filter=0.000000e+000 result=40 07:04:06 Config A/D Result=40 07:04:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:06 Get A/D filter: -9.255963e+061 result=40 07:04:06 Get A/D value=-858993460 result=40 07:04:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:06 Parameters OK 07:04:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:06 Set A/D data flow result=40 07:04:06 Set A/D channel type result=40 07:04:06 Set A/D encoding result=40 07:04:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:06 Set channel filter=0.000000e+000 result=40 07:04:06 Config A/D Result=40 07:04:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:06 Get A/D filter: -9.255963e+061 result=40 07:04:06 Get A/D value=-858993460 result=40 07:04:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.509998 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:06 Aux= 07:04:06 Message to Camera, serial 213422 queued 07:04:43 Received message from Master: op=PointingHead serial=213435 07:04:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:04:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:04:43 Point started: ret=0 07:04:43 point_skyscan result=0 07:04:44 Check angles 07:04:44 SkyScan query 07:04:44 SkyScan query done: ret=0 az=63.78<-4252 ze=66.51<-7566 Statuses=0009 0008 07:04:44 Msec=0 True Az=63.78 Ze=66.51 Az status=0009 Ze status=0008 07:04:45 Check angles 07:04:45 SkyScan query 07:04:45 SkyScan query done: ret=0 az=81.225<-5415 ze=66.51<-7566 Statuses=0009 0008 07:04:45 Msec=750 True Az=81.225 Ze=66.51 Az status=0009 Ze status=0008 07:04:45 Check angles 07:04:45 SkyScan query 07:04:46 SkyScan query done: ret=0 az=98.61<-6574 ze=66.51<-7566 Statuses=0009 0008 07:04:46 Msec=1500 True Az=98.61 Ze=66.51 Az status=0009 Ze status=0008 07:04:46 Check angles 07:04:46 SkyScan query 07:04:47 SkyScan query done: ret=0 az=116.1<-7740 ze=66.495<-7567 Statuses=0009 0008 07:04:47 Msec=2250 True Az=116.1 Ze=66.495 Az status=0009 Ze status=0008 07:04:47 Check angles 07:04:47 SkyScan query 07:04:47 SkyScan query done: ret=0 az=133.605<-8907 ze=66.495<-7567 Statuses=0009 0008 07:04:47 Msec=3000 True Az=133.605 Ze=66.495 Az status=0009 Ze status=0008 07:04:48 Check angles 07:04:48 SkyScan query 07:04:48 SkyScan query done: ret=0 az=151.065<-10071 ze=66.495<-7567 Statuses=0009 0008 07:04:48 Msec=3750 True Az=151.065 Ze=66.495 Az status=0009 Ze status=0008 07:04:48 Check angles 07:04:48 SkyScan query 07:04:49 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:04:49 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:04:49 Message to Master queued w/err=0: serial=213435 error=0 07:04:54 Received message from Master: op=Filter serial=213436 07:04:54 Color wheel filter change from 0 to 0 07:04:54 FLIGetFilterPos err=0 currentPosition=0 07:04:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:54 Filter is already there-color wheel unchanged 07:04:54 Received message from Master: op=Shutter serial=213437 07:04:54 Shutter LASER close 07:04:54 Received message from Camera: op=State serial=213439 07:04:54 GetSingleValue result=40 Value=cccccccc 07:04:54 SkyScan query 07:04:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:04:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:55 Parameters OK 07:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:55 Set A/D data flow result=40 07:04:55 Set A/D channel type result=40 07:04:55 Set A/D encoding result=40 07:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:55 Set channel filter=0.000000e+000 result=40 07:04:55 Config A/D Result=40 07:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:55 Get A/D filter: -9.255963e+061 result=40 07:04:55 Get A/D value=-858993460 result=40 07:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:55 Parameters OK 07:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:55 Set A/D data flow result=40 07:04:55 Set A/D channel type result=40 07:04:55 Set A/D encoding result=40 07:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:55 Set channel filter=0.000000e+000 result=40 07:04:55 Config A/D Result=40 07:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:55 Get A/D filter: -9.255963e+061 result=40 07:04:55 Get A/D value=-858993460 result=40 07:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:55 Aux= 07:04:55 Message to Camera, serial 213439 queued 07:05:32 Received message from Master: op=PointingHead serial=213452 07:05:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:05:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:05:32 Point started: ret=0 07:05:32 point_skyscan result=0 07:05:33 Check angles 07:05:33 SkyScan query 07:05:34 SkyScan query done: ret=0 az=134.97<-8998 ze=96.345<-5577 Statuses=0009 0009 07:05:34 Msec=0 True Az=134.97 Ze=96.345 Az status=0009 Ze status=0009 07:05:34 Check angles 07:05:34 SkyScan query 07:05:34 SkyScan query done: ret=0 az=130.995<-8733 ze=117.3<-4180 Statuses=0008 0009 07:05:34 Msec=750 True Az=130.995 Ze=117.3 Az status=0008 Ze status=0009 07:05:34 Check angles 07:05:34 SkyScan query 07:05:35 SkyScan query done: ret=0 az=130.995<-8733 ze=138.21<-2786 Statuses=0008 0009 07:05:35 Msec=1500 True Az=130.995 Ze=138.21 Az status=0008 Ze status=0009 07:05:35 Check angles 07:05:35 SkyScan query 07:05:36 SkyScan query done: ret=0 az=130.995<-8733 ze=159.18<-1388 Statuses=0008 0009 07:05:36 Msec=2250 True Az=130.995 Ze=159.18 Az status=0008 Ze status=0009 07:05:36 Check angles 07:05:36 SkyScan query 07:05:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.895<-23993 Statuses=0008 0009 07:05:37 Msec=3000 True Az=130.995 Ze=-179.895 Az status=0008 Ze status=0009 07:05:37 Check angles 07:05:37 SkyScan query 07:05:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.91<-22594 Statuses=0008 0009 07:05:37 Msec=3750 True Az=130.995 Ze=-158.91 Az status=0008 Ze status=0009 07:05:37 Check angles 07:05:37 SkyScan query 07:05:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 07:05:38 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 07:05:38 Check angles [UTC 2018-12-17 07:05:38] 07:05:38 SkyScan query 07:05:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:05:39 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:05:39 Message to Master queued w/err=0: serial=213452 error=0 07:05:44 Received message from Master: op=Filter serial=213453 07:05:44 Color wheel filter change from 0 to 0 07:05:44 FLIGetFilterPos err=0 currentPosition=0 07:05:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:44 Filter is already there-color wheel unchanged 07:05:44 Received message from Master: op=Shutter serial=213454 07:05:44 Shutter LASER close 07:05:44 Received message from Camera: op=State serial=213456 07:05:44 GetSingleValue result=40 Value=cccccccc 07:05:44 SkyScan query 07:05:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:05:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:45 Parameters OK 07:05:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:45 Set A/D data flow result=40 07:05:45 Set A/D channel type result=40 07:05:45 Set A/D encoding result=40 07:05:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:45 Set channel filter=0.000000e+000 result=40 07:05:45 Config A/D Result=40 07:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:45 Get A/D filter: -9.255963e+061 result=40 07:05:45 Get A/D value=-858993460 result=40 07:05:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:45 Parameters OK 07:05:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:45 Set A/D data flow result=40 07:05:45 Set A/D channel type result=40 07:05:45 Set A/D encoding result=40 07:05:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:45 Set channel filter=0.000000e+000 result=40 07:05:45 Config A/D Result=40 07:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:45 Get A/D filter: -9.255963e+061 result=40 07:05:45 Get A/D value=-858993460 result=40 07:05:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:45 Aux= 07:05:45 Message to Camera, serial 213456 queued 07:06:21 Received message from Master: op=PointingHead serial=213469 07:06:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:06:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:06:22 Point started: ret=0 07:06:22 point_skyscan result=0 07:06:23 Check angles 07:06:23 SkyScan query 07:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0009 0009 07:06:23 Msec=0 True Az=112.995 Ze=-171.3 Az status=0009 Ze status=0009 07:06:23 Check angles 07:06:23 SkyScan query 07:06:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:06:24 Msec=750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:06:24 Message to Master queued w/err=0: serial=213469 error=0 07:06:29 Received message from Master: op=Filter serial=213470 07:06:29 Color wheel filter change from 0 to 0 07:06:29 FLIGetFilterPos err=0 currentPosition=0 07:06:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:29 Filter is already there-color wheel unchanged 07:06:29 Received message from Master: op=Shutter serial=213471 07:06:29 Shutter LASER open 07:06:29 Received message from Camera: op=State serial=213473 07:06:29 GetSingleValue result=40 Value=cccccccc 07:06:29 SkyScan query 07:06:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:06:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:30 Parameters OK 07:06:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:30 Set A/D data flow result=40 07:06:30 Set A/D channel type result=40 07:06:30 Set A/D encoding result=40 07:06:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:30 Set channel filter=0.000000e+000 result=40 07:06:30 Config A/D Result=40 07:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:30 Get A/D filter: -9.255963e+061 result=40 07:06:30 Get A/D value=-858993460 result=40 07:06:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:30 Parameters OK 07:06:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:30 Set A/D data flow result=40 07:06:30 Set A/D channel type result=40 07:06:30 Set A/D encoding result=40 07:06:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:30 Set channel filter=0.000000e+000 result=40 07:06:30 Config A/D Result=40 07:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:30 Get A/D filter: -9.255963e+061 result=40 07:06:30 Get A/D value=-858993460 result=40 07:06:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:30 Aux= 07:06:30 Message to Camera, serial 213473 queued 07:06:38 Received message from Master: op=Shutter serial=213483 07:06:38 Shutter LASER close 07:06:39 Received message from Master: op=PointingHead serial=213487 07:06:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:06:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:06:39 Point started: ret=0 07:06:39 point_skyscan result=0 07:06:40 Check angles 07:06:40 SkyScan query 07:06:41 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.235<-21549 Statuses=0009 0009 07:06:41 Msec=0 True Az=135.96 Ze=-143.235 Az status=0009 Ze status=0009 07:06:41 Check angles 07:06:41 SkyScan query 07:06:41 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.83<-20122 Statuses=0009 0009 07:06:41 Msec=750 True Az=153.795 Ze=-121.83 Az status=0009 Ze status=0009 07:06:41 Check angles 07:06:41 SkyScan query 07:06:42 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.875<-18725 Statuses=0009 0009 07:06:42 Msec=1500 True Az=171.3 Ze=-100.875 Az status=0009 Ze status=0009 07:06:42 Check angles 07:06:42 SkyScan query 07:06:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.965<-17331 Statuses=0008 0009 07:06:43 Msec=2250 True Az=176.01 Ze=-79.965 Az status=0008 Ze status=0009 07:06:43 Check angles 07:06:43 SkyScan query 07:06:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.98<-15932 Statuses=0008 0009 07:06:44 Msec=3000 True Az=175.995 Ze=-58.98 Az status=0008 Ze status=0009 07:06:44 Check angles 07:06:44 SkyScan query 07:06:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:06:44 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:06:44 Message to Master queued w/err=0: serial=213487 error=0 07:06:49 Received message from Master: op=Filter serial=213488 07:06:49 Color wheel filter change from 0 to 0 07:06:49 FLIGetFilterPos err=0 currentPosition=0 07:06:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:49 Filter is already there-color wheel unchanged 07:06:49 Received message from Master: op=Shutter serial=213489 07:06:49 Shutter LASER close 07:06:50 Received message from Camera: op=State serial=213491 07:06:50 GetSingleValue result=40 Value=cccccccc 07:06:50 SkyScan query 07:06:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:06:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:50 Parameters OK 07:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:50 Set A/D data flow result=40 07:06:50 Set A/D channel type result=40 07:06:50 Set A/D encoding result=40 07:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:50 Set channel filter=0.000000e+000 result=40 07:06:50 Config A/D Result=40 07:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:50 Get A/D filter: -9.255963e+061 result=40 07:06:50 Get A/D value=-858993460 result=40 07:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:50 Parameters OK 07:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:50 Set A/D data flow result=40 07:06:50 Set A/D channel type result=40 07:06:50 Set A/D encoding result=40 07:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:50 Set channel filter=0.000000e+000 result=40 07:06:50 Config A/D Result=40 07:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:50 Get A/D filter: -9.255963e+061 result=40 07:06:50 Get A/D value=-858993460 result=40 07:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:50 Aux= 07:06:50 Message to Camera, serial 213491 queued 07:07:27 Received message from Master: op=PointingHead serial=213504 07:07:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:07:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:07:27 Point started: ret=0 07:07:27 point_skyscan result=0 07:07:28 Check angles 07:07:28 SkyScan query 07:07:29 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.005<-13467 Statuses=0009 0009 07:07:29 Msec=0 True Az=153.21 Ze=-22.005 Az status=0009 Ze status=0009 07:07:29 Check angles 07:07:29 SkyScan query 07:07:29 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.005<-12067 Statuses=0009 0009 07:07:29 Msec=750 True Az=135.795 Ze=-1.005 Az status=0009 Ze status=0009 07:07:30 Check angles 07:07:30 SkyScan query 07:07:30 SkyScan query done: ret=0 az=117.78<-7852 ze=20.34<-10644 Statuses=0009 0009 07:07:30 Msec=1500 True Az=117.78 Ze=20.34 Az status=0009 Ze status=0009 07:07:30 Check angles 07:07:30 SkyScan query 07:07:31 SkyScan query done: ret=0 az=100.425<-6695 ze=41.37<-9242 Statuses=0009 0009 07:07:31 Msec=2250 True Az=100.425 Ze=41.37 Az status=0009 Ze status=0009 07:07:31 Check angles 07:07:31 SkyScan query 07:07:32 SkyScan query done: ret=0 az=85.98<-5732 ze=51.6<-8560 Statuses=0009 0008 07:07:32 Msec=3000 True Az=85.98 Ze=51.6 Az status=0009 Ze status=0008 07:07:32 Check angles 07:07:32 SkyScan query 07:07:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:07:33 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:07:33 Message to Master queued w/err=0: serial=213504 error=0 07:07:38 Received message from Master: op=Filter serial=213505 07:07:38 Color wheel filter change from 0 to 0 07:07:38 FLIGetFilterPos err=0 currentPosition=0 07:07:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:38 Filter is already there-color wheel unchanged 07:07:38 Received message from Master: op=Shutter serial=213506 07:07:38 Shutter LASER close 07:07:38 Received message from Camera: op=State serial=213508 07:07:38 GetSingleValue result=40 Value=cccccccc 07:07:38 SkyScan query 07:07:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:07:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:38 Parameters OK 07:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:38 Set A/D data flow result=40 07:07:38 Set A/D channel type result=40 07:07:38 Set A/D encoding result=40 07:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:38 Set channel filter=0.000000e+000 result=40 07:07:38 Config A/D Result=40 07:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:38 Get A/D filter: -9.255963e+061 result=40 07:07:38 Get A/D value=-858993460 result=40 07:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:38 Parameters OK 07:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:38 Set A/D data flow result=40 07:07:38 Set A/D channel type result=40 07:07:38 Set A/D encoding result=40 07:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:38 Set channel filter=0.000000e+000 result=40 07:07:38 Config A/D Result=40 07:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:38 Get A/D filter: -9.255963e+061 result=40 07:07:38 Get A/D value=-858993460 result=40 07:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:38 Aux= 07:07:38 Message to Camera, serial 213508 queued 07:08:15 Received message from Master: op=PointingHead serial=213521 07:08:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:08:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:08:16 Point started: ret=0 07:08:16 point_skyscan result=0 07:08:16 Check angles 07:08:16 SkyScan query 07:08:17 SkyScan query done: ret=0 az=85.995<-5733 ze=21.63<-10558 Statuses=0008 0009 07:08:17 Msec=0 True Az=85.995 Ze=21.63 Az status=0008 Ze status=0009 07:08:17 Check angles 07:08:17 SkyScan query 07:08:18 SkyScan query done: ret=0 az=85.995<-5733 ze=0.72<-11952 Statuses=0008 0009 07:08:18 Msec=750 True Az=85.995 Ze=0.72 Az status=0008 Ze status=0009 07:08:18 Check angles 07:08:18 SkyScan query 07:08:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.28<-13352 Statuses=0008 0009 07:08:18 Msec=1500 True Az=85.995 Ze=-20.28 Az status=0008 Ze status=0009 07:08:19 Check angles 07:08:19 SkyScan query 07:08:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.19<-14746 Statuses=0008 0009 07:08:19 Msec=2250 True Az=85.995 Ze=-41.19 Az status=0008 Ze status=0009 07:08:19 Check angles 07:08:19 SkyScan query 07:08:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:08:20 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:08:20 Message to Master queued w/err=0: serial=213521 error=0 07:08:25 Received message from Master: op=Filter serial=213522 07:08:25 Color wheel filter change from 0 to 0 07:08:25 FLIGetFilterPos err=0 currentPosition=0 07:08:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:25 Filter is already there-color wheel unchanged 07:08:25 Received message from Master: op=Shutter serial=213523 07:08:25 Shutter LASER close 07:08:25 Received message from Camera: op=State serial=213525 07:08:25 GetSingleValue result=40 Value=cccccccc 07:08:25 SkyScan query 07:08:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:08:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:26 Parameters OK 07:08:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:26 Set A/D data flow result=40 07:08:26 Set A/D channel type result=40 07:08:26 Set A/D encoding result=40 07:08:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:26 Set channel filter=0.000000e+000 result=40 07:08:26 Config A/D Result=40 07:08:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:26 Get A/D filter: -9.255963e+061 result=40 07:08:26 Get A/D value=-858993460 result=40 07:08:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:26 Parameters OK 07:08:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:26 Set A/D data flow result=40 07:08:26 Set A/D channel type result=40 07:08:26 Set A/D encoding result=40 07:08:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:26 Set channel filter=0.000000e+000 result=40 07:08:26 Config A/D Result=40 07:08:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:26 Get A/D filter: -9.255963e+061 result=40 07:08:26 Get A/D value=-858993460 result=40 07:08:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:26 Aux= 07:08:26 Message to Camera, serial 213525 queued 07:09:03 Received message from Master: op=PointingHead serial=213538 07:09:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:09:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:09:03 Point started: ret=0 07:09:03 point_skyscan result=0 07:09:04 Check angles 07:09:04 SkyScan query 07:09:04 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.33<-17422 Statuses=0009 0009 07:09:04 Msec=0 True Az=108.945 Ze=-81.33 Az status=0009 Ze status=0009 07:09:04 Check angles 07:09:04 SkyScan query 07:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 07:09:05 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 07:09:05 Check angles 07:09:05 SkyScan query 07:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 07:09:06 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 07:09:06 Check angles 07:09:06 SkyScan query 07:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.15<-21610 Statuses=0008 0009 07:09:06 Msec=2250 True Az=112.995 Ze=-144.15 Az status=0008 Ze status=0009 07:09:07 Check angles 07:09:07 SkyScan query 07:09:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 07:09:07 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 07:09:07 Check angles 07:09:07 SkyScan query 07:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:09:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:09:08 Message to Master queued w/err=0: serial=213538 error=0 07:09:13 Received message from Master: op=Filter serial=213539 07:09:13 Color wheel filter change from 0 to 0 07:09:13 FLIGetFilterPos err=0 currentPosition=0 07:09:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:13 Filter is already there-color wheel unchanged 07:09:13 Received message from Master: op=Shutter serial=213540 07:09:13 Shutter LASER open 07:09:13 Received message from Camera: op=State serial=213542 07:09:13 GetSingleValue result=40 Value=cccccccc 07:09:13 SkyScan query 07:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:09:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:14 Parameters OK 07:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:14 Set A/D data flow result=40 07:09:14 Set A/D channel type result=40 07:09:14 Set A/D encoding result=40 07:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:14 Set channel filter=0.000000e+000 result=40 07:09:14 Config A/D Result=40 07:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:14 Get A/D filter: -9.255963e+061 result=40 07:09:14 Get A/D value=-858993460 result=40 07:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:14 Parameters OK 07:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:14 Set A/D data flow result=40 07:09:14 Set A/D channel type result=40 07:09:14 Set A/D encoding result=40 07:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:14 Set channel filter=0.000000e+000 result=40 07:09:14 Config A/D Result=40 07:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:14 Get A/D filter: -9.255963e+061 result=40 07:09:14 Get A/D value=-858993460 result=40 07:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:14 Aux= 07:09:14 Message to Camera, serial 213542 queued 07:09:22 Received message from Master: op=Shutter serial=213552 07:09:22 Shutter LASER close 07:09:23 Received message from Master: op=PointingHead serial=213556 07:09:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:09:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:09:23 Point started: ret=0 07:09:23 point_skyscan result=0 07:09:24 Check angles 07:09:24 SkyScan query 07:09:24 SkyScan query done: ret=0 az=89.82<-5988 ze=157.02<-1532 Statuses=0009 0009 07:09:24 Msec=0 True Az=89.82 Ze=157.02 Az status=0009 Ze status=0009 07:09:25 Check angles 07:09:25 SkyScan query 07:09:25 SkyScan query done: ret=0 az=72.285<-4819 ze=136.065<-2929 Statuses=0009 0009 07:09:25 Msec=750 True Az=72.285 Ze=136.065 Az status=0009 Ze status=0009 07:09:25 Check angles 07:09:25 SkyScan query 07:09:26 SkyScan query done: ret=0 az=54.96<-3664 ze=115.14<-4324 Statuses=0009 0009 07:09:26 Msec=1500 True Az=54.96 Ze=115.14 Az status=0009 Ze status=0009 07:09:26 Check angles 07:09:26 SkyScan query 07:09:27 SkyScan query done: ret=0 az=40.95<-2730 ze=94.17<-5722 Statuses=0009 0009 07:09:27 Msec=2250 True Az=40.95 Ze=94.17 Az status=0009 Ze status=0009 07:09:27 Check angles 07:09:27 SkyScan query 07:09:27 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 07:09:27 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 07:09:28 Check angles 07:09:28 SkyScan query 07:09:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 07:09:28 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 07:09:28 Check angles 07:09:28 SkyScan query 07:09:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:09:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:09:29 Message to Master queued w/err=0: serial=213556 error=0 07:09:34 Received message from Master: op=Filter serial=213557 07:09:34 Color wheel filter change from 0 to 0 07:09:34 FLIGetFilterPos err=0 currentPosition=0 07:09:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:34 Filter is already there-color wheel unchanged 07:09:34 Received message from Master: op=Shutter serial=213558 07:09:34 Shutter LASER close 07:09:34 Received message from Camera: op=State serial=213560 07:09:34 GetSingleValue result=40 Value=cccccccc 07:09:34 SkyScan query 07:09:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:09:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:35 Parameters OK 07:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:35 Set A/D data flow result=40 07:09:35 Set A/D channel type result=40 07:09:35 Set A/D encoding result=40 07:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:35 Set channel filter=0.000000e+000 result=40 07:09:35 Config A/D Result=40 07:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:35 Get A/D filter: -9.255963e+061 result=40 07:09:35 Get A/D value=-858993460 result=40 07:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:35 Parameters OK 07:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:35 Set A/D data flow result=40 07:09:35 Set A/D channel type result=40 07:09:35 Set A/D encoding result=40 07:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:35 Set channel filter=0.000000e+000 result=40 07:09:35 Config A/D Result=40 07:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:35 Get A/D filter: -9.255963e+061 result=40 07:09:35 Get A/D value=-858993460 result=40 07:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:35 Aux= 07:09:35 Message to Camera, serial 213560 queued 07:10:11 Received message from Master: op=PointingHead serial=213572 07:10:11 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:10:11 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:10:11 Point started: ret=0 07:10:11 point_skyscan result=0 07:10:12 Check angles 07:10:12 SkyScan query 07:10:12 SkyScan query done: ret=0 az=63.81<-4254 ze=66.525<-7565 Statuses=0009 0008 07:10:12 Msec=0 True Az=63.81 Ze=66.525 Az status=0009 Ze status=0008 07:10:13 Check angles 07:10:13 SkyScan query 07:10:13 SkyScan query done: ret=0 az=81.105<-5407 ze=66.51<-7566 Statuses=0009 0008 07:10:13 Msec=750 True Az=81.105 Ze=66.51 Az status=0009 Ze status=0008 07:10:13 Check angles 07:10:13 SkyScan query 07:10:14 SkyScan query done: ret=0 az=98.655<-6577 ze=66.51<-7566 Statuses=0009 0008 07:10:14 Msec=1500 True Az=98.655 Ze=66.51 Az status=0009 Ze status=0008 07:10:14 Check angles 07:10:14 SkyScan query 07:10:15 SkyScan query done: ret=0 az=116.565<-7771 ze=66.51<-7566 Statuses=0009 0008 07:10:15 Msec=2250 True Az=116.565 Ze=66.51 Az status=0009 Ze status=0008 07:10:15 Check angles 07:10:15 SkyScan query 07:10:15 SkyScan query done: ret=0 az=134.055<-8937 ze=66.51<-7566 Statuses=0009 0008 07:10:15 Msec=3000 True Az=134.055 Ze=66.51 Az status=0009 Ze status=0008 07:10:16 Check angles 07:10:16 SkyScan query 07:10:16 SkyScan query done: ret=0 az=151.35<-10090 ze=66.51<-7566 Statuses=0009 0008 07:10:16 Msec=3750 True Az=151.35 Ze=66.51 Az status=0009 Ze status=0008 07:10:16 Check angles 07:10:16 SkyScan query 07:10:17 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 07:10:17 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 07:10:17 Message to Master queued w/err=0: serial=213572 error=0 07:10:22 Received message from Master: op=Filter serial=213573 07:10:22 Color wheel filter change from 0 to 0 07:10:22 FLIGetFilterPos err=0 currentPosition=0 07:10:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:22 Filter is already there-color wheel unchanged 07:10:22 Received message from Master: op=Shutter serial=213574 07:10:22 Shutter LASER close 07:10:22 Received message from Camera: op=State serial=213576 07:10:22 GetSingleValue result=40 Value=cccccccc 07:10:22 SkyScan query 07:10:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 07:10:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:23 Parameters OK 07:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:23 Set A/D data flow result=40 07:10:23 Set A/D channel type result=40 07:10:23 Set A/D encoding result=40 07:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:23 Set channel filter=0.000000e+000 result=40 07:10:23 Config A/D Result=40 07:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:23 Get A/D filter: -9.255963e+061 result=40 07:10:23 Get A/D value=-858993460 result=40 07:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:23 Parameters OK 07:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:23 Set A/D data flow result=40 07:10:23 Set A/D channel type result=40 07:10:23 Set A/D encoding result=40 07:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:23 Set channel filter=0.000000e+000 result=40 07:10:23 Config A/D Result=40 07:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:23 Get A/D filter: -9.255963e+061 result=40 07:10:23 Get A/D value=-858993460 result=40 07:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:23 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:23 Aux= 07:10:23 Message to Camera, serial 213576 queued 07:11:00 Received message from Master: op=PointingHead serial=213589 07:11:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:11:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:11:00 Point started: ret=0 07:11:00 point_skyscan result=0 07:11:01 Check angles 07:11:01 SkyScan query 07:11:01 SkyScan query done: ret=0 az=134.61<-8974 ze=96.63<-5558 Statuses=0009 0009 07:11:01 Msec=0 True Az=134.61 Ze=96.63 Az status=0009 Ze status=0009 07:11:02 Check angles 07:11:02 SkyScan query 07:11:02 SkyScan query done: ret=0 az=130.995<-8733 ze=117.99<-4134 Statuses=0008 0009 07:11:02 Msec=750 True Az=130.995 Ze=117.99 Az status=0008 Ze status=0009 07:11:02 Check angles 07:11:02 SkyScan query 07:11:03 SkyScan query done: ret=0 az=130.995<-8733 ze=138.96<-2736 Statuses=0008 0009 07:11:03 Msec=1500 True Az=130.995 Ze=138.96 Az status=0008 Ze status=0009 07:11:03 Check angles 07:11:03 SkyScan query 07:11:04 SkyScan query done: ret=0 az=130.995<-8733 ze=159.915<-1339 Statuses=0008 0009 07:11:04 Msec=2250 True Az=130.995 Ze=159.915 Az status=0008 Ze status=0009 07:11:04 Check angles 07:11:04 SkyScan query 07:11:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.115<-23941 Statuses=0008 0009 07:11:04 Msec=3000 True Az=130.995 Ze=-179.115 Az status=0008 Ze status=0009 07:11:05 Check angles 07:11:05 SkyScan query 07:11:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.16<-22544 Statuses=0008 0009 07:11:05 Msec=3750 True Az=130.995 Ze=-158.16 Az status=0008 Ze status=0009 07:11:05 Check angles 07:11:05 SkyScan query 07:11:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 07:11:06 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 07:11:06 Check angles 07:11:06 SkyScan query 07:11:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:11:07 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:11:07 Message to Master queued w/err=0: serial=213589 error=0 07:11:12 Received message from Master: op=Filter serial=213590 07:11:12 Color wheel filter change from 0 to 0 07:11:12 FLIGetFilterPos err=0 currentPosition=0 07:11:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:12 Filter is already there-color wheel unchanged 07:11:12 Received message from Master: op=Shutter serial=213591 07:11:12 Shutter LASER close 07:11:12 Received message from Camera: op=State serial=213593 07:11:12 GetSingleValue result=40 Value=cccccccc 07:11:12 SkyScan query 07:11:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:11:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:13 Parameters OK 07:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:13 Set A/D data flow result=40 07:11:13 Set A/D channel type result=40 07:11:13 Set A/D encoding result=40 07:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:13 Set channel filter=0.000000e+000 result=40 07:11:13 Config A/D Result=40 07:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:13 Get A/D filter: -9.255963e+061 result=40 07:11:13 Get A/D value=-858993460 result=40 07:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:13 Parameters OK 07:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:13 Set A/D data flow result=40 07:11:13 Set A/D channel type result=40 07:11:13 Set A/D encoding result=40 07:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:13 Set channel filter=0.000000e+000 result=40 07:11:13 Config A/D Result=40 07:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:13 Get A/D filter: -9.255963e+061 result=40 07:11:13 Get A/D value=-858993460 result=40 07:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:13 Aux= 07:11:13 Message to Camera, serial 213593 queued 07:11:48 Received message from Master: op=PointingHead serial=213605 07:11:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:11:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:11:49 Point started: ret=0 07:11:49 point_skyscan result=0 07:11:50 Check angles 07:11:50 SkyScan query 07:11:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 07:11:50 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 07:11:50 Check angles 07:11:50 SkyScan query 07:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:11:51 Msec=750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:11:51 Message to Master queued w/err=0: serial=213605 error=0 07:11:56 Received message from Master: op=Filter serial=213606 07:11:56 Color wheel filter change from 0 to 0 07:11:56 FLIGetFilterPos err=0 currentPosition=0 07:11:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:56 Filter is already there-color wheel unchanged 07:11:56 Received message from Master: op=Shutter serial=213607 07:11:56 Shutter LASER open 07:11:56 Received message from Camera: op=State serial=213609 07:11:56 GetSingleValue result=40 Value=cccccccc 07:11:56 SkyScan query 07:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:11:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:57 Parameters OK 07:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:57 Set A/D data flow result=40 07:11:57 Set A/D channel type result=40 07:11:57 Set A/D encoding result=40 07:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:57 Set channel filter=0.000000e+000 result=40 07:11:57 Config A/D Result=40 07:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:57 Get A/D filter: -9.255963e+061 result=40 07:11:57 Get A/D value=-858993460 result=40 07:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:57 Parameters OK 07:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:57 Set A/D data flow result=40 07:11:57 Set A/D channel type result=40 07:11:57 Set A/D encoding result=40 07:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:57 Set channel filter=0.000000e+000 result=40 07:11:57 Config A/D Result=40 07:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:57 Get A/D filter: -9.255963e+061 result=40 07:11:57 Get A/D value=-858993460 result=40 07:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:57 Aux= 07:11:57 Message to Camera, serial 213609 queued 07:12:05 Received message from Master: op=Shutter serial=213619 07:12:05 Shutter LASER close 07:12:06 Received message from Master: op=PointingHead serial=213623 07:12:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:12:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:12:06 Point started: ret=0 07:12:06 point_skyscan result=0 07:12:07 Check angles 07:12:07 SkyScan query 07:12:07 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.175<-21545 Statuses=0009 0009 07:12:07 Msec=0 True Az=136.005 Ze=-143.175 Az status=0009 Ze status=0009 07:12:08 Check angles 07:12:08 SkyScan query 07:12:08 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.205<-20147 Statuses=0009 0009 07:12:08 Msec=750 True Az=153.51 Ze=-122.205 Az status=0009 Ze status=0009 07:12:08 Check angles 07:12:08 SkyScan query 07:12:09 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.34<-18756 Statuses=0009 0009 07:12:09 Msec=1500 True Az=170.985 Ze=-101.34 Az status=0009 Ze status=0009 07:12:09 Check angles 07:12:09 SkyScan query 07:12:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.89<-17326 Statuses=0008 0009 07:12:10 Msec=2250 True Az=176.01 Ze=-79.89 Az status=0008 Ze status=0009 07:12:10 Check angles 07:12:10 SkyScan query 07:12:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.905<-15927 Statuses=0008 0009 07:12:10 Msec=3000 True Az=175.995 Ze=-58.905 Az status=0008 Ze status=0009 07:12:11 Check angles 07:12:11 SkyScan query 07:12:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 07:12:11 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 07:12:11 Message to Master queued w/err=0: serial=213623 error=0 07:12:16 Received message from Master: op=Filter serial=213624 07:12:16 Color wheel filter change from 0 to 0 07:12:16 FLIGetFilterPos err=0 currentPosition=0 07:12:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:16 Filter is already there-color wheel unchanged 07:12:16 Received message from Master: op=Shutter serial=213625 07:12:16 Shutter LASER close 07:12:17 Received message from Camera: op=State serial=213627 07:12:17 GetSingleValue result=40 Value=cccccccc 07:12:17 SkyScan query 07:12:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:12:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:17 Parameters OK 07:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:17 Set A/D data flow result=40 07:12:17 Set A/D channel type result=40 07:12:17 Set A/D encoding result=40 07:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:17 Set channel filter=0.000000e+000 result=40 07:12:17 Config A/D Result=40 07:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:17 Get A/D filter: -9.255963e+061 result=40 07:12:17 Get A/D value=-858993460 result=40 07:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:17 Parameters OK 07:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:17 Set A/D data flow result=40 07:12:17 Set A/D channel type result=40 07:12:17 Set A/D encoding result=40 07:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:17 Set channel filter=0.000000e+000 result=40 07:12:17 Config A/D Result=40 07:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:17 Get A/D filter: -9.255963e+061 result=40 07:12:17 Get A/D value=-858993460 result=40 07:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:17 Aux= 07:12:17 Message to Camera, serial 213627 queued 07:12:54 Received message from Master: op=PointingHead serial=213640 07:12:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:12:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:12:54 Point started: ret=0 07:12:54 point_skyscan result=0 07:12:55 Check angles 07:12:55 SkyScan query 07:12:56 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.855<-13457 Statuses=0009 0009 07:12:56 Msec=0 True Az=152.955 Ze=-21.855 Az status=0009 Ze status=0009 07:12:56 Check angles 07:12:56 SkyScan query 07:12:56 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.795<-12053 Statuses=0009 0009 07:12:56 Msec=750 True Az=135.585 Ze=-0.795 Az status=0009 Ze status=0009 07:12:57 Check angles 07:12:57 SkyScan query 07:12:57 SkyScan query done: ret=0 az=117.735<-7849 ze=20.535<-10631 Statuses=0009 0009 07:12:57 Msec=1500 True Az=117.735 Ze=20.535 Az status=0009 Ze status=0009 07:12:57 Check angles 07:12:57 SkyScan query 07:12:58 SkyScan query done: ret=0 az=99.99<-6666 ze=41.955<-9203 Statuses=0009 0009 07:12:58 Msec=2250 True Az=99.99 Ze=41.955 Az status=0009 Ze status=0009 07:12:58 Check angles 07:12:58 SkyScan query 07:12:59 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 07:12:59 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 07:12:59 Check angles 07:12:59 SkyScan query 07:12:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:12:59 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:12:59 Message to Master queued w/err=0: serial=213640 error=0 07:13:04 Received message from Master: op=Filter serial=213641 07:13:04 Color wheel filter change from 0 to 0 07:13:04 FLIGetFilterPos err=0 currentPosition=0 07:13:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:04 Filter is already there-color wheel unchanged 07:13:05 Received message from Master: op=Shutter serial=213642 07:13:05 Shutter LASER close 07:13:05 Received message from Camera: op=State serial=213644 07:13:05 GetSingleValue result=40 Value=cccccccc 07:13:05 SkyScan query 07:13:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:13:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:05 Parameters OK 07:13:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:05 Set A/D data flow result=40 07:13:05 Set A/D channel type result=40 07:13:05 Set A/D encoding result=40 07:13:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:05 Set channel filter=0.000000e+000 result=40 07:13:05 Config A/D Result=40 07:13:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:05 Get A/D filter: -9.255963e+061 result=40 07:13:05 Get A/D value=-858993460 result=40 07:13:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:05 Parameters OK 07:13:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:05 Set A/D data flow result=40 07:13:05 Set A/D channel type result=40 07:13:05 Set A/D encoding result=40 07:13:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:05 Set channel filter=0.000000e+000 result=40 07:13:05 Config A/D Result=40 07:13:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:05 Get A/D filter: -9.255963e+061 result=40 07:13:05 Get A/D value=-858993460 result=40 07:13:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:05 Aux= 07:13:05 Message to Camera, serial 213644 queued 07:13:42 Received message from Master: op=PointingHead serial=213657 07:13:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:13:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:13:43 Point started: ret=0 07:13:43 point_skyscan result=0 07:13:43 Check angles 07:13:43 SkyScan query 07:13:44 SkyScan query done: ret=0 az=85.995<-5733 ze=21.66<-10556 Statuses=0008 0009 07:13:44 Msec=0 True Az=85.995 Ze=21.66 Az status=0008 Ze status=0009 07:13:44 Check angles 07:13:44 SkyScan query 07:13:45 SkyScan query done: ret=0 az=85.995<-5733 ze=0.765<-11949 Statuses=0008 0009 07:13:45 Msec=750 True Az=85.995 Ze=0.765 Az status=0008 Ze status=0009 07:13:45 Check angles 07:13:45 SkyScan query 07:13:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.25<-13350 Statuses=0008 0009 07:13:45 Msec=1500 True Az=85.995 Ze=-20.25 Az status=0008 Ze status=0009 07:13:46 Check angles 07:13:46 SkyScan query 07:13:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.145<-14743 Statuses=0008 0009 07:13:46 Msec=2250 True Az=85.995 Ze=-41.145 Az status=0008 Ze status=0009 07:13:46 Check angles 07:13:46 SkyScan query 07:13:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:13:47 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:13:47 Message to Master queued w/err=0: serial=213657 error=0 07:13:52 Received message from Master: op=Filter serial=213658 07:13:52 Color wheel filter change from 0 to 0 07:13:52 FLIGetFilterPos err=0 currentPosition=0 07:13:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:52 Filter is already there-color wheel unchanged 07:13:52 Received message from Master: op=Shutter serial=213659 07:13:52 Shutter LASER close 07:13:52 Received message from Camera: op=State serial=213661 07:13:52 GetSingleValue result=40 Value=cccccccc 07:13:52 SkyScan query 07:13:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:13:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:53 Parameters OK 07:13:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:53 Set A/D data flow result=40 07:13:53 Set A/D channel type result=40 07:13:53 Set A/D encoding result=40 07:13:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:53 Set channel filter=0.000000e+000 result=40 07:13:53 Config A/D Result=40 07:13:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:53 Get A/D filter: -9.255963e+061 result=40 07:13:53 Get A/D value=-858993460 result=40 07:13:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:53 Parameters OK 07:13:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:53 Set A/D data flow result=40 07:13:53 Set A/D channel type result=40 07:13:53 Set A/D encoding result=40 07:13:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:53 Set channel filter=0.000000e+000 result=40 07:13:53 Config A/D Result=40 07:13:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:53 Get A/D filter: -9.255963e+061 result=40 07:13:53 Get A/D value=-858993460 result=40 07:13:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:53 Aux= 07:13:53 Message to Camera, serial 213661 queued 07:14:29 Received message from Master: op=PointingHead serial=213673 07:14:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:14:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:14:29 Point started: ret=0 07:14:29 point_skyscan result=0 07:14:30 Check angles 07:14:30 SkyScan query 07:14:30 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.24<-17416 Statuses=0009 0009 07:14:30 Msec=0 True Az=109.005 Ze=-81.24 Az status=0009 Ze status=0009 07:14:30 Check angles 07:14:30 SkyScan query 07:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 07:14:31 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 07:14:31 Check angles 07:14:31 SkyScan query 07:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 07:14:32 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 07:14:32 Check angles 07:14:32 SkyScan query 07:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.075<-21605 Statuses=0008 0009 07:14:33 Msec=2250 True Az=112.995 Ze=-144.075 Az status=0008 Ze status=0009 07:14:33 Check angles 07:14:33 SkyScan query 07:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.06<-23004 Statuses=0008 0009 07:14:33 Msec=3000 True Az=112.995 Ze=-165.06 Az status=0008 Ze status=0009 07:14:33 Check angles 07:14:33 SkyScan query 07:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:14:34 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:14:34 Message to Master queued w/err=0: serial=213673 error=0 07:14:39 Received message from Master: op=Filter serial=213674 07:14:39 Color wheel filter change from 0 to 0 07:14:39 FLIGetFilterPos err=0 currentPosition=0 07:14:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:39 Filter is already there-color wheel unchanged 07:14:39 Received message from Master: op=Shutter serial=213675 07:14:39 Shutter LASER open 07:14:39 Received message from Camera: op=State serial=213677 07:14:39 GetSingleValue result=40 Value=cccccccc 07:14:39 SkyScan query 07:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:14:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:40 Parameters OK 07:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:40 Set A/D data flow result=40 07:14:40 Set A/D channel type result=40 07:14:40 Set A/D encoding result=40 07:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:40 Set channel filter=0.000000e+000 result=40 07:14:40 Config A/D Result=40 07:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:40 Get A/D filter: -9.255963e+061 result=40 07:14:40 Get A/D value=-858993460 result=40 07:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:40 Parameters OK 07:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:40 Set A/D data flow result=40 07:14:40 Set A/D channel type result=40 07:14:40 Set A/D encoding result=40 07:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:40 Set channel filter=0.000000e+000 result=40 07:14:40 Config A/D Result=40 07:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:40 Get A/D filter: -9.255963e+061 result=40 07:14:40 Get A/D value=-858993460 result=40 07:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:40 Aux= 07:14:40 Message to Camera, serial 213677 queued 07:14:48 Received message from Master: op=Shutter serial=213687 07:14:48 Shutter LASER close 07:14:49 Received message from Master: op=PointingHead serial=213691 07:14:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:14:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:14:49 Point started: ret=0 07:14:49 point_skyscan result=0 07:14:50 Check angles 07:14:50 SkyScan query 07:14:50 SkyScan query done: ret=0 az=89.82<-5988 ze=157.125<-1525 Statuses=0009 0009 07:14:50 Msec=0 True Az=89.82 Ze=157.125 Az status=0009 Ze status=0009 07:14:51 Check angles 07:14:51 SkyScan query 07:14:51 SkyScan query done: ret=0 az=71.94<-4796 ze=135.72<-2952 Statuses=0009 0009 07:14:51 Msec=750 True Az=71.94 Ze=135.72 Az status=0009 Ze status=0009 07:14:51 Check angles 07:14:51 SkyScan query 07:14:52 SkyScan query done: ret=0 az=54.72<-3648 ze=114.75<-4350 Statuses=0009 0009 07:14:52 Msec=1500 True Az=54.72 Ze=114.75 Az status=0009 Ze status=0009 07:14:52 Check angles 07:14:52 SkyScan query 07:14:53 SkyScan query done: ret=0 az=40.98<-2732 ze=93.81<-5746 Statuses=0009 0009 07:14:53 Msec=2250 True Az=40.98 Ze=93.81 Az status=0009 Ze status=0009 07:14:53 Check angles 07:14:53 SkyScan query 07:14:53 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 07:14:53 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 07:14:54 Check angles 07:14:54 SkyScan query 07:14:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 07:14:54 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 07:14:54 Check angles 07:14:54 SkyScan query 07:14:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:14:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:14:55 Message to Master queued w/err=0: serial=213691 error=0 07:15:00 Received message from Master: op=Filter serial=213692 07:15:00 Color wheel filter change from 0 to 0 07:15:00 FLIGetFilterPos err=0 currentPosition=0 07:15:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:00 Filter is already there-color wheel unchanged 07:15:00 Received message from Master: op=Shutter serial=213693 07:15:00 Shutter LASER close 07:15:00 Received message from Camera: op=State serial=213695 07:15:00 GetSingleValue result=40 Value=cccccccc 07:15:00 SkyScan query 07:15:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:15:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:01 Parameters OK [UTC 2018-12-17 07:15:01] 07:15:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:01 Set A/D data flow result=40 07:15:01 Set A/D channel type result=40 07:15:01 Set A/D encoding result=40 07:15:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:01 Set channel filter=0.000000e+000 result=40 07:15:01 Config A/D Result=40 07:15:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:01 Get A/D filter: -9.255963e+061 result=40 07:15:01 Get A/D value=-858993460 result=40 07:15:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:01 Parameters OK 07:15:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:01 Set A/D data flow result=40 07:15:01 Set A/D channel type result=40 07:15:01 Set A/D encoding result=40 07:15:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:01 Set channel filter=0.000000e+000 result=40 07:15:01 Config A/D Result=40 07:15:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:01 Get A/D filter: -9.255963e+061 result=40 07:15:01 Get A/D value=-858993460 result=40 07:15:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:01 Aux= 07:15:01 Message to Camera, serial 213695 queued 07:15:27 Received message from Master: op=Identify serial=213696 07:15:38 Received message from Master: op=PointingHead serial=213711 07:15:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:15:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:15:38 Point started: ret=0 07:15:38 point_skyscan result=0 07:15:39 Check angles 07:15:39 SkyScan query 07:15:39 SkyScan query done: ret=0 az=63.78<-4252 ze=66.51<-7566 Statuses=0009 0008 07:15:39 Msec=0 True Az=63.78 Ze=66.51 Az status=0009 Ze status=0008 07:15:40 Check angles 07:15:40 SkyScan query 07:15:40 SkyScan query done: ret=0 az=81.195<-5413 ze=66.51<-7566 Statuses=0009 0008 07:15:40 Msec=750 True Az=81.195 Ze=66.51 Az status=0009 Ze status=0008 07:15:40 Check angles 07:15:40 SkyScan query 07:15:41 SkyScan query done: ret=0 az=98.655<-6577 ze=66.51<-7566 Statuses=0009 0008 07:15:41 Msec=1500 True Az=98.655 Ze=66.51 Az status=0009 Ze status=0008 07:15:41 Check angles 07:15:41 SkyScan query 07:15:42 SkyScan query done: ret=0 az=116.13<-7742 ze=66.495<-7567 Statuses=0009 0008 07:15:42 Msec=2250 True Az=116.13 Ze=66.495 Az status=0009 Ze status=0008 07:15:42 Check angles 07:15:42 SkyScan query 07:15:42 SkyScan query done: ret=0 az=133.515<-8901 ze=66.495<-7567 Statuses=0009 0008 07:15:42 Msec=3000 True Az=133.515 Ze=66.495 Az status=0009 Ze status=0008 07:15:43 Check angles 07:15:43 SkyScan query 07:15:43 SkyScan query done: ret=0 az=151.02<-10068 ze=66.495<-7567 Statuses=0009 0008 07:15:43 Msec=3750 True Az=151.02 Ze=66.495 Az status=0009 Ze status=0008 07:15:43 Check angles 07:15:43 SkyScan query 07:15:44 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:15:44 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:15:44 Message to Master queued w/err=0: serial=213711 error=0 07:15:49 Received message from Master: op=Filter serial=213712 07:15:49 Color wheel filter change from 0 to 0 07:15:49 FLIGetFilterPos err=0 currentPosition=0 07:15:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:49 Filter is already there-color wheel unchanged 07:15:49 Received message from Master: op=Shutter serial=213713 07:15:49 Shutter LASER close 07:15:49 Received message from Camera: op=State serial=213715 07:15:49 GetSingleValue result=40 Value=cccccccc 07:15:49 SkyScan query 07:15:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:15:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:50 Parameters OK 07:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:50 Set A/D data flow result=40 07:15:50 Set A/D channel type result=40 07:15:50 Set A/D encoding result=40 07:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:50 Set channel filter=0.000000e+000 result=40 07:15:50 Config A/D Result=40 07:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:50 Get A/D filter: -9.255963e+061 result=40 07:15:50 Get A/D value=-858993460 result=40 07:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:50 Parameters OK 07:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:50 Set A/D data flow result=40 07:15:50 Set A/D channel type result=40 07:15:50 Set A/D encoding result=40 07:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:50 Set channel filter=0.000000e+000 result=40 07:15:50 Config A/D Result=40 07:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:50 Get A/D filter: -9.255963e+061 result=40 07:15:50 Get A/D value=-858993460 result=40 07:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:50 Aux= 07:15:50 Message to Camera, serial 213715 queued [UTC 2018-12-17 07:15:52] 07:16:27 Received message from Master: op=PointingHead serial=213728 07:16:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:16:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:16:27 Point started: ret=0 07:16:27 point_skyscan result=0 07:16:28 Check angles 07:16:28 SkyScan query 07:16:28 SkyScan query done: ret=0 az=134.835<-8989 ze=96.375<-5575 Statuses=0009 0009 07:16:28 Msec=0 True Az=134.835 Ze=96.375 Az status=0009 Ze status=0009 07:16:28 Check angles 07:16:28 SkyScan query 07:16:29 SkyScan query done: ret=0 az=130.995<-8733 ze=117.33<-4178 Statuses=0008 0009 07:16:29 Msec=750 True Az=130.995 Ze=117.33 Az status=0008 Ze status=0009 07:16:29 Check angles 07:16:29 SkyScan query 07:16:30 SkyScan query done: ret=0 az=130.995<-8733 ze=138.24<-2784 Statuses=0008 0009 07:16:30 Msec=1500 True Az=130.995 Ze=138.24 Az status=0008 Ze status=0009 07:16:30 Check angles 07:16:30 SkyScan query 07:16:31 SkyScan query done: ret=0 az=130.995<-8733 ze=159.225<-1385 Statuses=0008 0009 07:16:31 Msec=2250 True Az=130.995 Ze=159.225 Az status=0008 Ze status=0009 07:16:31 Check angles 07:16:31 SkyScan query 07:16:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.85<-23990 Statuses=0008 0009 07:16:31 Msec=3000 True Az=130.995 Ze=-179.85 Az status=0008 Ze status=0009 07:16:31 Check angles 07:16:31 SkyScan query 07:16:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.88<-22592 Statuses=0008 0009 07:16:32 Msec=3750 True Az=130.995 Ze=-158.88 Az status=0008 Ze status=0009 07:16:32 Check angles 07:16:32 SkyScan query 07:16:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 07:16:33 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 07:16:33 Check angles 07:16:33 SkyScan query 07:16:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:16:34 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:16:34 Message to Master queued w/err=0: serial=213728 error=0 07:16:39 Received message from Master: op=Filter serial=213729 07:16:39 Color wheel filter change from 0 to 0 07:16:39 FLIGetFilterPos err=0 currentPosition=0 07:16:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:39 Filter is already there-color wheel unchanged 07:16:39 Received message from Master: op=Shutter serial=213730 07:16:39 Shutter LASER close 07:16:39 Received message from Camera: op=State serial=213732 07:16:39 GetSingleValue result=40 Value=cccccccc 07:16:39 SkyScan query 07:16:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:16:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:39 Parameters OK 07:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:39 Set A/D data flow result=40 07:16:39 Set A/D channel type result=40 07:16:39 Set A/D encoding result=40 07:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:39 Set channel filter=0.000000e+000 result=40 07:16:39 Config A/D Result=40 07:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:39 Get A/D filter: -9.255963e+061 result=40 07:16:39 Get A/D value=-858993460 result=40 07:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:39 Parameters OK 07:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:39 Set A/D data flow result=40 07:16:39 Set A/D channel type result=40 07:16:39 Set A/D encoding result=40 07:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:39 Set channel filter=0.000000e+000 result=40 07:16:39 Config A/D Result=40 07:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:39 Get A/D filter: -9.255963e+061 result=40 07:16:39 Get A/D value=-858993460 result=40 07:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:39 Aux= 07:16:39 Message to Camera, serial 213732 queued 07:17:16 Received message from Master: op=PointingHead serial=213745 07:17:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:17:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:17:17 Point started: ret=0 07:17:17 point_skyscan result=0 07:17:17 Check angles 07:17:17 SkyScan query 07:17:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0009 0009 07:17:18 Msec=0 True Az=112.995 Ze=-171.165 Az status=0009 Ze status=0009 07:17:18 Check angles 07:17:18 SkyScan query 07:17:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:17:19 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:17:19 Message to Master queued w/err=0: serial=213745 error=0 07:17:24 Received message from Master: op=Filter serial=213746 07:17:24 Color wheel filter change from 0 to 0 07:17:24 FLIGetFilterPos err=0 currentPosition=0 07:17:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:24 Filter is already there-color wheel unchanged 07:17:24 Received message from Master: op=Shutter serial=213747 07:17:24 Shutter LASER open 07:17:24 Received message from Camera: op=State serial=213749 07:17:24 GetSingleValue result=40 Value=cccccccc 07:17:24 SkyScan query 07:17:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:17:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:25 Parameters OK 07:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:25 Set A/D data flow result=40 07:17:25 Set A/D channel type result=40 07:17:25 Set A/D encoding result=40 07:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:25 Set channel filter=0.000000e+000 result=40 07:17:25 Config A/D Result=40 07:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:25 Get A/D filter: -9.255963e+061 result=40 07:17:25 Get A/D value=-858993460 result=40 07:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:25 Parameters OK 07:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:25 Set A/D data flow result=40 07:17:25 Set A/D channel type result=40 07:17:25 Set A/D encoding result=40 07:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:25 Set channel filter=0.000000e+000 result=40 07:17:25 Config A/D Result=40 07:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:25 Get A/D filter: -9.255963e+061 result=40 07:17:25 Get A/D value=-858993460 result=40 07:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:25 Aux= 07:17:25 Message to Camera, serial 213749 queued 07:17:33 Received message from Master: op=Shutter serial=213759 07:17:33 Shutter LASER close 07:17:34 Received message from Master: op=PointingHead serial=213763 07:17:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:17:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:17:34 Point started: ret=0 07:17:34 point_skyscan result=0 07:17:35 Check angles 07:17:35 SkyScan query 07:17:35 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.19<-21546 Statuses=0009 0009 07:17:35 Msec=0 True Az=136.02 Ze=-143.19 Az status=0009 Ze status=0009 07:17:35 Check angles 07:17:35 SkyScan query 07:17:36 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.235<-20149 Statuses=0009 0009 07:17:36 Msec=750 True Az=153.525 Ze=-122.235 Az status=0009 Ze status=0009 07:17:36 Check angles 07:17:36 SkyScan query 07:17:37 SkyScan query done: ret=0 az=170.94<-11396 ze=-101.37<-18758 Statuses=0009 0009 07:17:37 Msec=1500 True Az=170.94 Ze=-101.37 Az status=0009 Ze status=0009 07:17:37 Check angles 07:17:37 SkyScan query 07:17:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.355<-17357 Statuses=0008 0009 07:17:37 Msec=2250 True Az=175.995 Ze=-80.355 Az status=0008 Ze status=0009 07:17:38 Check angles 07:17:38 SkyScan query 07:17:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.4<-15960 Statuses=0008 0009 07:17:38 Msec=3000 True Az=175.995 Ze=-59.4 Az status=0008 Ze status=0009 07:17:38 Check angles 07:17:38 SkyScan query 07:17:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:17:39 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:17:39 Message to Master queued w/err=0: serial=213763 error=0 07:17:44 Received message from Master: op=Filter serial=213764 07:17:44 Color wheel filter change from 0 to 0 07:17:44 FLIGetFilterPos err=0 currentPosition=0 07:17:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:44 Filter is already there-color wheel unchanged 07:17:44 Received message from Master: op=Shutter serial=213765 07:17:44 Shutter LASER close 07:17:44 Received message from Camera: op=State serial=213767 07:17:44 GetSingleValue result=40 Value=cccccccc 07:17:44 SkyScan query 07:17:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:17:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:45 Parameters OK 07:17:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:45 Set A/D data flow result=40 07:17:45 Set A/D channel type result=40 07:17:45 Set A/D encoding result=40 07:17:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:45 Set channel filter=0.000000e+000 result=40 07:17:45 Config A/D Result=40 07:17:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:45 Get A/D filter: -9.255963e+061 result=40 07:17:45 Get A/D value=-858993460 result=40 07:17:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:45 Parameters OK 07:17:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:45 Set A/D data flow result=40 07:17:45 Set A/D channel type result=40 07:17:45 Set A/D encoding result=40 07:17:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:45 Set channel filter=0.000000e+000 result=40 07:17:45 Config A/D Result=40 07:17:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:45 Get A/D filter: -9.255963e+061 result=40 07:17:45 Get A/D value=-858993460 result=40 07:17:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:45 Aux= 07:17:45 Message to Camera, serial 213767 queued 07:18:22 Received message from Master: op=PointingHead serial=213780 07:18:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:18:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:18:22 Point started: ret=0 07:18:22 point_skyscan result=0 07:18:23 Check angles 07:18:23 SkyScan query 07:18:23 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.9<-13460 Statuses=0009 0009 07:18:23 Msec=0 True Az=153.09 Ze=-21.9 Az status=0009 Ze status=0009 07:18:24 Check angles 07:18:24 SkyScan query 07:18:24 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.855<-12057 Statuses=0009 0009 07:18:24 Msec=750 True Az=135.69 Ze=-0.855 Az status=0009 Ze status=0009 07:18:24 Check angles 07:18:24 SkyScan query 07:18:25 SkyScan query done: ret=0 az=118.095<-7873 ze=20.025<-10665 Statuses=0009 0009 07:18:25 Msec=1500 True Az=118.095 Ze=20.025 Az status=0009 Ze status=0009 07:18:25 Check angles 07:18:25 SkyScan query 07:18:26 SkyScan query done: ret=0 az=100.755<-6717 ze=41.04<-9264 Statuses=0009 0009 07:18:26 Msec=2250 True Az=100.755 Ze=41.04 Az status=0009 Ze status=0009 07:18:26 Check angles 07:18:26 SkyScan query 07:18:26 SkyScan query done: ret=0 az=85.98<-5732 ze=51.585<-8561 Statuses=0009 0008 07:18:26 Msec=3000 True Az=85.98 Ze=51.585 Az status=0009 Ze status=0008 07:18:27 Check angles 07:18:27 SkyScan query 07:18:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:18:27 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:18:27 Message to Master queued w/err=0: serial=213780 error=0 07:18:32 Received message from Master: op=Filter serial=213781 07:18:32 Color wheel filter change from 0 to 0 07:18:32 FLIGetFilterPos err=0 currentPosition=0 07:18:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:32 Filter is already there-color wheel unchanged 07:18:32 Received message from Master: op=Shutter serial=213782 07:18:32 Shutter LASER close 07:18:32 Received message from Camera: op=State serial=213784 07:18:32 GetSingleValue result=40 Value=cccccccc 07:18:32 SkyScan query 07:18:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 07:18:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:33 Parameters OK 07:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:33 Set A/D data flow result=40 07:18:33 Set A/D channel type result=40 07:18:33 Set A/D encoding result=40 07:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:33 Set channel filter=0.000000e+000 result=40 07:18:33 Config A/D Result=40 07:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:33 Get A/D filter: -9.255963e+061 result=40 07:18:33 Get A/D value=-858993460 result=40 07:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:33 Parameters OK 07:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:33 Set A/D data flow result=40 07:18:33 Set A/D channel type result=40 07:18:33 Set A/D encoding result=40 07:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:33 Set channel filter=0.000000e+000 result=40 07:18:33 Config A/D Result=40 07:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:33 Get A/D filter: -9.255963e+061 result=40 07:18:33 Get A/D value=-858993460 result=40 07:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:33 Aux= 07:18:33 Message to Camera, serial 213784 queued 07:19:10 Received message from Master: op=PointingHead serial=213797 07:19:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:19:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:19:10 Point started: ret=0 07:19:10 point_skyscan result=0 07:19:11 Check angles 07:19:11 SkyScan query 07:19:12 SkyScan query done: ret=0 az=85.995<-5733 ze=21.33<-10578 Statuses=0008 0009 07:19:12 Msec=0 True Az=85.995 Ze=21.33 Az status=0008 Ze status=0009 07:19:12 Check angles 07:19:12 SkyScan query 07:19:12 SkyScan query done: ret=0 az=85.995<-5733 ze=0.39<-11974 Statuses=0008 0009 07:19:12 Msec=750 True Az=85.995 Ze=0.39 Az status=0008 Ze status=0009 07:19:13 Check angles 07:19:13 SkyScan query 07:19:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-20.985<-13399 Statuses=0008 0009 07:19:13 Msec=1500 True Az=85.995 Ze=-20.985 Az status=0008 Ze status=0009 07:19:13 Check angles 07:19:13 SkyScan query 07:19:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-41.985<-14799 Statuses=0008 0009 07:19:14 Msec=2250 True Az=85.995 Ze=-41.985 Az status=0008 Ze status=0009 07:19:14 Check angles 07:19:14 SkyScan query 07:19:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.555<-15437 Statuses=0008 0008 07:19:15 Msec=3000 True Az=85.995 Ze=-51.555 Az status=0008 Ze status=0008 07:19:15 Message to Master queued w/err=0: serial=213797 error=0 07:19:20 Received message from Master: op=Filter serial=213798 07:19:20 Color wheel filter change from 0 to 0 07:19:20 FLIGetFilterPos err=0 currentPosition=0 07:19:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:20 Filter is already there-color wheel unchanged 07:19:20 Received message from Master: op=Shutter serial=213799 07:19:20 Shutter LASER close 07:19:20 Received message from Camera: op=State serial=213801 07:19:20 GetSingleValue result=40 Value=cccccccc 07:19:20 SkyScan query 07:19:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:19:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:20 Parameters OK 07:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:20 Set A/D data flow result=40 07:19:20 Set A/D channel type result=40 07:19:20 Set A/D encoding result=40 07:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:20 Set channel filter=0.000000e+000 result=40 07:19:20 Config A/D Result=40 07:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:20 Get A/D filter: -9.255963e+061 result=40 07:19:20 Get A/D value=-858993460 result=40 07:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:20 Parameters OK 07:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:20 Set A/D data flow result=40 07:19:20 Set A/D channel type result=40 07:19:20 Set A/D encoding result=40 07:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:20 Set channel filter=0.000000e+000 result=40 07:19:20 Config A/D Result=40 07:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:20 Get A/D filter: -9.255963e+061 result=40 07:19:20 Get A/D value=-858993460 result=40 07:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:20 Aux= 07:19:20 Message to Camera, serial 213801 queued 07:19:57 Received message from Master: op=PointingHead serial=213814 07:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:19:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:19:58 Point started: ret=0 07:19:58 point_skyscan result=0 07:19:58 Check angles 07:19:58 SkyScan query 07:19:59 SkyScan query done: ret=0 az=108.885<-7259 ze=-81.15<-17410 Statuses=0009 0009 07:19:59 Msec=0 True Az=108.885 Ze=-81.15 Az status=0009 Ze status=0009 07:19:59 Check angles 07:19:59 SkyScan query 07:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.105<-18807 Statuses=0008 0009 07:20:00 Msec=750 True Az=112.995 Ze=-102.105 Az status=0008 Ze status=0009 07:20:00 Check angles 07:20:00 SkyScan query 07:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 07:20:00 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 07:20:01 Check angles 07:20:01 SkyScan query 07:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 07:20:01 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 07:20:01 Check angles 07:20:01 SkyScan query 07:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 07:20:02 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 07:20:02 Check angles 07:20:02 SkyScan query 07:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:20:03 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:20:03 Message to Master queued w/err=0: serial=213814 error=0 07:20:08 Received message from Master: op=Filter serial=213815 07:20:08 Color wheel filter change from 0 to 0 07:20:08 FLIGetFilterPos err=0 currentPosition=0 07:20:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:08 Filter is already there-color wheel unchanged 07:20:08 Received message from Master: op=Shutter serial=213816 07:20:08 Shutter LASER open 07:20:08 Received message from Camera: op=State serial=213818 07:20:08 GetSingleValue result=40 Value=cccccccc 07:20:08 SkyScan query 07:20:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:20:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:09 Parameters OK 07:20:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:09 Set A/D data flow result=40 07:20:09 Set A/D channel type result=40 07:20:09 Set A/D encoding result=40 07:20:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:09 Set channel filter=0.000000e+000 result=40 07:20:09 Config A/D Result=40 07:20:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:09 Get A/D filter: -9.255963e+061 result=40 07:20:09 Get A/D value=-858993460 result=40 07:20:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:09 Parameters OK 07:20:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:09 Set A/D data flow result=40 07:20:09 Set A/D channel type result=40 07:20:09 Set A/D encoding result=40 07:20:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:09 Set channel filter=0.000000e+000 result=40 07:20:09 Config A/D Result=40 07:20:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:09 Get A/D filter: -9.255963e+061 result=40 07:20:09 Get A/D value=-858993460 result=40 07:20:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:09 Aux= 07:20:09 Message to Camera, serial 213818 queued 07:20:17 Received message from Master: op=Shutter serial=213828 07:20:17 Shutter LASER close 07:20:18 Received message from Master: op=PointingHead serial=213832 07:20:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:20:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:20:18 Point started: ret=0 07:20:18 point_skyscan result=0 07:20:19 Check angles 07:20:19 SkyScan query 07:20:19 SkyScan query done: ret=0 az=89.88<-5992 ze=157.14<-1524 Statuses=0009 0009 07:20:19 Msec=0 True Az=89.88 Ze=157.14 Az status=0009 Ze status=0009 07:20:19 Check angles 07:20:19 SkyScan query 07:20:20 SkyScan query done: ret=0 az=72.3<-4820 ze=136.2<-2920 Statuses=0009 0009 07:20:20 Msec=750 True Az=72.3 Ze=136.2 Az status=0009 Ze status=0009 07:20:20 Check angles 07:20:20 SkyScan query 07:20:21 SkyScan query done: ret=0 az=54.72<-3648 ze=114.765<-4349 Statuses=0009 0009 07:20:21 Msec=1500 True Az=54.72 Ze=114.765 Az status=0009 Ze status=0009 07:20:21 Check angles 07:20:21 SkyScan query 07:20:21 SkyScan query done: ret=0 az=40.995<-2733 ze=93.39<-5774 Statuses=0009 0009 07:20:21 Msec=2250 True Az=40.995 Ze=93.39 Az status=0009 Ze status=0009 07:20:22 Check angles 07:20:22 SkyScan query 07:20:22 SkyScan query done: ret=0 az=40.995<-2733 ze=72.015<-7199 Statuses=0008 0009 07:20:22 Msec=3000 True Az=40.995 Ze=72.015 Az status=0008 Ze status=0009 07:20:22 Check angles 07:20:22 SkyScan query 07:20:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 07:20:23 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 07:20:23 Check angles 07:20:23 SkyScan query 07:20:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:20:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:20:24 Message to Master queued w/err=0: serial=213832 error=0 07:20:29 Received message from Master: op=Filter serial=213833 07:20:29 Color wheel filter change from 0 to 0 07:20:29 FLIGetFilterPos err=0 currentPosition=0 07:20:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:29 Filter is already there-color wheel unchanged 07:20:29 Received message from Master: op=Shutter serial=213834 07:20:29 Shutter LASER close 07:20:29 Received message from Camera: op=State serial=213836 07:20:29 GetSingleValue result=40 Value=cccccccc 07:20:29 SkyScan query 07:20:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:20:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:30 Parameters OK 07:20:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:30 Set A/D data flow result=40 07:20:30 Set A/D channel type result=40 07:20:30 Set A/D encoding result=40 07:20:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:30 Set channel filter=0.000000e+000 result=40 07:20:30 Config A/D Result=40 07:20:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:30 Get A/D filter: -9.255963e+061 result=40 07:20:30 Get A/D value=-858993460 result=40 07:20:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:30 Parameters OK 07:20:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:30 Set A/D data flow result=40 07:20:30 Set A/D channel type result=40 07:20:30 Set A/D encoding result=40 07:20:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:30 Set channel filter=0.000000e+000 result=40 07:20:30 Config A/D Result=40 07:20:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:30 Get A/D filter: -9.255963e+061 result=40 07:20:30 Get A/D value=-858993460 result=40 07:20:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:30 Aux= 07:20:30 Message to Camera, serial 213836 queued 07:21:06 Received message from Master: op=PointingHead serial=213849 07:21:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:21:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:21:07 Point started: ret=0 07:21:07 point_skyscan result=0 07:21:08 Check angles 07:21:08 SkyScan query 07:21:08 SkyScan query done: ret=0 az=63.855<-4257 ze=66.51<-7566 Statuses=0009 0008 07:21:08 Msec=0 True Az=63.855 Ze=66.51 Az status=0009 Ze status=0008 07:21:08 Check angles 07:21:08 SkyScan query 07:21:09 SkyScan query done: ret=0 az=81.36<-5424 ze=66.51<-7566 Statuses=0009 0008 07:21:09 Msec=750 True Az=81.36 Ze=66.51 Az status=0009 Ze status=0008 07:21:09 Check angles 07:21:09 SkyScan query 07:21:10 SkyScan query done: ret=0 az=98.835<-6589 ze=66.51<-7566 Statuses=0009 0008 07:21:10 Msec=1500 True Az=98.835 Ze=66.51 Az status=0009 Ze status=0008 07:21:10 Check angles 07:21:10 SkyScan query 07:21:10 SkyScan query done: ret=0 az=116.265<-7751 ze=66.495<-7567 Statuses=0009 0008 07:21:10 Msec=2250 True Az=116.265 Ze=66.495 Az status=0009 Ze status=0008 07:21:11 Check angles 07:21:11 SkyScan query 07:21:11 SkyScan query done: ret=0 az=133.785<-8919 ze=66.495<-7567 Statuses=0009 0008 07:21:11 Msec=3000 True Az=133.785 Ze=66.495 Az status=0009 Ze status=0008 07:21:11 Check angles 07:21:11 SkyScan query 07:21:12 SkyScan query done: ret=0 az=151.23<-10082 ze=66.495<-7567 Statuses=0009 0008 07:21:12 Msec=3750 True Az=151.23 Ze=66.495 Az status=0009 Ze status=0008 07:21:12 Check angles 07:21:12 SkyScan query 07:21:13 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:21:13 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:21:13 Message to Master queued w/err=0: serial=213849 error=0 07:21:18 Received message from Master: op=Filter serial=213850 07:21:18 Color wheel filter change from 0 to 0 07:21:18 FLIGetFilterPos err=0 currentPosition=0 07:21:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:18 Filter is already there-color wheel unchanged 07:21:18 Received message from Master: op=Shutter serial=213851 07:21:18 Shutter LASER close 07:21:18 Received message from Camera: op=State serial=213853 07:21:18 GetSingleValue result=40 Value=cccccccc 07:21:18 SkyScan query 07:21:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:21:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:18 Parameters OK 07:21:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:18 Set A/D data flow result=40 07:21:18 Set A/D channel type result=40 07:21:18 Set A/D encoding result=40 07:21:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:18 Set channel filter=0.000000e+000 result=40 07:21:18 Config A/D Result=40 07:21:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:18 Get A/D filter: -9.255963e+061 result=40 07:21:18 Get A/D value=-858993460 result=40 07:21:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:18 Parameters OK 07:21:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:18 Set A/D data flow result=40 07:21:18 Set A/D channel type result=40 07:21:18 Set A/D encoding result=40 07:21:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:18 Set channel filter=0.000000e+000 result=40 07:21:18 Config A/D Result=40 07:21:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:18 Get A/D filter: -9.255963e+061 result=40 07:21:18 Get A/D value=-858993460 result=40 07:21:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:18 Aux= 07:21:18 Message to Camera, serial 213853 queued 07:21:55 Received message from Master: op=PointingHead serial=213866 07:21:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:21:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:21:56 Point started: ret=0 07:21:56 point_skyscan result=0 07:21:57 Check angles 07:21:57 SkyScan query 07:21:57 SkyScan query done: ret=0 az=134.625<-8975 ze=96.66<-5556 Statuses=0009 0009 07:21:57 Msec=0 True Az=134.625 Ze=96.66 Az status=0009 Ze status=0009 07:21:57 Check angles 07:21:57 SkyScan query 07:21:58 SkyScan query done: ret=0 az=130.995<-8733 ze=117.555<-4163 Statuses=0008 0009 07:21:58 Msec=750 True Az=130.995 Ze=117.555 Az status=0008 Ze status=0009 07:21:58 Check angles 07:21:58 SkyScan query 07:21:59 SkyScan query done: ret=0 az=130.995<-8733 ze=138.48<-2768 Statuses=0008 0009 07:21:59 Msec=1500 True Az=130.995 Ze=138.48 Az status=0008 Ze status=0009 07:21:59 Check angles 07:21:59 SkyScan query 07:21:59 SkyScan query done: ret=0 az=130.995<-8733 ze=159.45<-1370 Statuses=0008 0009 07:21:59 Msec=2250 True Az=130.995 Ze=159.45 Az status=0008 Ze status=0009 07:22:00 Check angles 07:22:00 SkyScan query 07:22:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.595<-23973 Statuses=0008 0009 07:22:00 Msec=3000 True Az=130.995 Ze=-179.595 Az status=0008 Ze status=0009 07:22:00 Check angles 07:22:00 SkyScan query 07:22:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.64<-22576 Statuses=0008 0009 07:22:01 Msec=3750 True Az=130.995 Ze=-158.64 Az status=0008 Ze status=0009 07:22:01 Check angles 07:22:01 SkyScan query 07:22:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 07:22:02 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 07:22:02 Check angles 07:22:02 SkyScan query 07:22:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:22:02 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:22:02 Message to Master queued w/err=0: serial=213866 error=0 07:22:07 Received message from Master: op=Filter serial=213867 07:22:07 Color wheel filter change from 0 to 0 07:22:07 FLIGetFilterPos err=0 currentPosition=0 07:22:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:07 Filter is already there-color wheel unchanged 07:22:08 Received message from Master: op=Shutter serial=213868 07:22:08 Shutter LASER close 07:22:08 Received message from Camera: op=State serial=213870 07:22:08 GetSingleValue result=40 Value=cccccccc 07:22:08 SkyScan query 07:22:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:22:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:08 Parameters OK 07:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:08 Set A/D data flow result=40 07:22:08 Set A/D channel type result=40 07:22:08 Set A/D encoding result=40 07:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:08 Set channel filter=0.000000e+000 result=40 07:22:08 Config A/D Result=40 07:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:08 Get A/D filter: -9.255963e+061 result=40 07:22:08 Get A/D value=-858993460 result=40 07:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:08 Parameters OK 07:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:08 Set A/D data flow result=40 07:22:08 Set A/D channel type result=40 07:22:08 Set A/D encoding result=40 07:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:08 Set channel filter=0.000000e+000 result=40 07:22:08 Config A/D Result=40 07:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:08 Get A/D filter: -9.255963e+061 result=40 07:22:08 Get A/D value=-858993460 result=40 07:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:08 Aux= 07:22:08 Message to Camera, serial 213870 queued 07:22:45 Received message from Master: op=PointingHead serial=213883 07:22:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:22:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:22:45 Point started: ret=0 07:22:45 point_skyscan result=0 07:22:46 Check angles 07:22:46 SkyScan query 07:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 07:22:47 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 07:22:47 Check angles 07:22:47 SkyScan query 07:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:22:47 Msec=750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:22:47 Message to Master queued w/err=0: serial=213883 error=0 07:22:52 Received message from Master: op=Filter serial=213884 07:22:52 Color wheel filter change from 0 to 0 07:22:52 FLIGetFilterPos err=0 currentPosition=0 07:22:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:52 Filter is already there-color wheel unchanged 07:22:53 Received message from Master: op=Shutter serial=213885 07:22:53 Shutter LASER open 07:22:53 Received message from Camera: op=State serial=213887 07:22:53 GetSingleValue result=40 Value=cccccccc 07:22:53 SkyScan query 07:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:22:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:53 Parameters OK 07:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:53 Set A/D data flow result=40 07:22:53 Set A/D channel type result=40 07:22:53 Set A/D encoding result=40 07:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:53 Set channel filter=0.000000e+000 result=40 07:22:53 Config A/D Result=40 07:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:53 Get A/D filter: -9.255963e+061 result=40 07:22:53 Get A/D value=-858993460 result=40 07:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:53 Parameters OK 07:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:53 Set A/D data flow result=40 07:22:53 Set A/D channel type result=40 07:22:53 Set A/D encoding result=40 07:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:53 Set channel filter=0.000000e+000 result=40 07:22:53 Config A/D Result=40 07:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:53 Get A/D filter: -9.255963e+061 result=40 07:22:53 Get A/D value=-858993460 result=40 07:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:53 Aux= 07:22:53 Message to Camera, serial 213887 queued 07:23:01 Received message from Master: op=Shutter serial=213896 07:23:01 Shutter LASER close 07:23:01 Received message from Master: op=PointingHead serial=213900 07:23:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:23:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:23:02 Point started: ret=0 07:23:02 point_skyscan result=0 07:23:03 Check angles 07:23:03 SkyScan query 07:23:03 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.4<-21560 Statuses=0009 0009 07:23:03 Msec=0 True Az=135.825 Ze=-143.4 Az status=0009 Ze status=0009 07:23:03 Check angles 07:23:03 SkyScan query 07:23:04 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.445<-20163 Statuses=0009 0009 07:23:04 Msec=750 True Az=153.33 Ze=-122.445 Az status=0009 Ze status=0009 07:23:04 Check angles 07:23:04 SkyScan query 07:23:05 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.55<-18770 Statuses=0009 0009 07:23:05 Msec=1500 True Az=170.805 Ze=-101.55 Az status=0009 Ze status=0009 07:23:05 Check angles 07:23:05 SkyScan query 07:23:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.535<-17369 Statuses=0008 0009 07:23:05 Msec=2250 True Az=175.995 Ze=-80.535 Az status=0008 Ze status=0009 07:23:06 Check angles 07:23:06 SkyScan query 07:23:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.595<-15973 Statuses=0008 0009 07:23:06 Msec=3000 True Az=175.995 Ze=-59.595 Az status=0008 Ze status=0009 07:23:06 Check angles 07:23:06 SkyScan query 07:23:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:23:07 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:23:07 Message to Master queued w/err=0: serial=213900 error=0 07:23:12 Received message from Master: op=Filter serial=213901 07:23:12 Color wheel filter change from 0 to 0 07:23:12 FLIGetFilterPos err=0 currentPosition=0 07:23:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:12 Filter is already there-color wheel unchanged 07:23:12 Received message from Master: op=Shutter serial=213902 07:23:12 Shutter LASER close 07:23:12 Received message from Camera: op=State serial=213904 07:23:12 GetSingleValue result=40 Value=cccccccc 07:23:12 SkyScan query 07:23:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:23:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:13 Parameters OK 07:23:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:13 Set A/D data flow result=40 07:23:13 Set A/D channel type result=40 07:23:13 Set A/D encoding result=40 07:23:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:13 Set channel filter=0.000000e+000 result=40 07:23:13 Config A/D Result=40 07:23:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:13 Get A/D filter: -9.255963e+061 result=40 07:23:13 Get A/D value=-858993460 result=40 07:23:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:13 Parameters OK 07:23:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:13 Set A/D data flow result=40 07:23:13 Set A/D channel type result=40 07:23:13 Set A/D encoding result=40 07:23:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:13 Set channel filter=0.000000e+000 result=40 07:23:13 Config A/D Result=40 07:23:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:13 Get A/D filter: -9.255963e+061 result=40 07:23:13 Get A/D value=-858993460 result=40 07:23:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:13 Aux= 07:23:13 Message to Camera, serial 213904 queued 07:23:50 Received message from Master: op=PointingHead serial=213917 07:23:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:23:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:23:50 Point started: ret=0 07:23:50 point_skyscan result=0 07:23:51 Check angles 07:23:51 SkyScan query 07:23:51 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.3<-13420 Statuses=0009 0009 07:23:51 Msec=0 True Az=152.595 Ze=-21.3 Az status=0009 Ze status=0009 07:23:51 Check angles 07:23:51 SkyScan query 07:23:52 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.3<-12020 Statuses=0009 0009 07:23:52 Msec=750 True Az=135.045 Ze=-0.3 Az status=0009 Ze status=0009 07:23:52 Check angles 07:23:52 SkyScan query 07:23:53 SkyScan query done: ret=0 az=117.555<-7837 ze=20.61<-10626 Statuses=0009 0009 07:23:53 Msec=1500 True Az=117.555 Ze=20.61 Az status=0009 Ze status=0009 07:23:53 Check angles 07:23:53 SkyScan query 07:23:54 SkyScan query done: ret=0 az=100.2<-6680 ze=41.61<-9226 Statuses=0009 0009 07:23:54 Msec=2250 True Az=100.2 Ze=41.61 Az status=0009 Ze status=0009 07:23:54 Check angles 07:23:54 SkyScan query 07:23:54 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 07:23:54 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 07:23:54 Check angles 07:23:54 SkyScan query 07:23:55 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 07:23:55 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 07:23:55 Message to Master queued w/err=0: serial=213917 error=0 07:24:00 Received message from Master: op=Filter serial=213918 07:24:00 Color wheel filter change from 0 to 0 07:24:00 FLIGetFilterPos err=0 currentPosition=0 07:24:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:00 Filter is already there-color wheel unchanged 07:24:00 Received message from Master: op=Shutter serial=213919 07:24:00 Shutter LASER close 07:24:00 Received message from Camera: op=State serial=213921 07:24:00 GetSingleValue result=40 Value=cccccccc 07:24:00 SkyScan query 07:24:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:24:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:01 Parameters OK 07:24:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:01 Set A/D data flow result=40 07:24:01 Set A/D channel type result=40 07:24:01 Set A/D encoding result=40 07:24:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:01 Set channel filter=0.000000e+000 result=40 07:24:01 Config A/D Result=40 07:24:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:01 Get A/D filter: -9.255963e+061 result=40 07:24:01 Get A/D value=-858993460 result=40 07:24:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:01 Parameters OK 07:24:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:01 Set A/D data flow result=40 07:24:01 Set A/D channel type result=40 07:24:01 Set A/D encoding result=40 07:24:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:01 Set channel filter=0.000000e+000 result=40 07:24:01 Config A/D Result=40 07:24:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:01 Get A/D filter: -9.255963e+061 result=40 07:24:01 Get A/D value=-858993460 result=40 07:24:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:01 Aux= 07:24:01 Message to Camera, serial 213921 queued 07:24:38 Received message from Master: op=PointingHead serial=213934 07:24:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:24:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:24:38 Point started: ret=0 07:24:38 point_skyscan result=0 07:24:39 Check angles 07:24:39 SkyScan query 07:24:39 SkyScan query done: ret=0 az=109.29<-7286 ze=38.49<-9434 Statuses=0009 0008 07:24:39 Msec=0 True Az=109.29 Ze=38.49 Az status=0009 Ze status=0008 07:24:40 Check angles 07:24:40 SkyScan query 07:24:40 SkyScan query done: ret=0 az=126.615<-8441 ze=38.49<-9434 Statuses=0009 0008 07:24:40 Msec=750 True Az=126.615 Ze=38.49 Az status=0009 Ze status=0008 07:24:40 Check angles 07:24:40 SkyScan query 07:24:41 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 07:24:41 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 07:24:41 Check angles 07:24:41 SkyScan query 07:24:42 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 07:24:42 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 07:24:42 Check angles 07:24:42 SkyScan query 07:24:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:24:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:24:43 Check angles 07:24:43 SkyScan query 07:24:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:24:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:24:43 Message to Master queued w/err=0: serial=213934 error=0 07:24:48 Received message from Master: op=Filter serial=213935 07:24:48 Color wheel filter change from 0 to 0 07:24:48 FLIGetFilterPos err=0 currentPosition=0 07:24:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:48 Filter is already there-color wheel unchanged 07:24:48 Received message from Master: op=Shutter serial=213936 07:24:48 Shutter LASER close 07:24:48 Received message from Camera: op=State serial=213938 07:24:48 GetSingleValue result=40 Value=cccccccc 07:24:48 SkyScan query 07:24:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:24:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:49 Parameters OK 07:24:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:49 Set A/D data flow result=40 07:24:49 Set A/D channel type result=40 07:24:49 Set A/D encoding result=40 07:24:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:49 Set channel filter=0.000000e+000 result=40 07:24:49 Config A/D Result=40 07:24:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:49 Get A/D filter: -9.255963e+061 result=40 07:24:49 Get A/D value=-858993460 result=40 07:24:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:49 Parameters OK 07:24:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:49 Set A/D data flow result=40 07:24:49 Set A/D channel type result=40 07:24:49 Set A/D encoding result=40 07:24:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:49 Set channel filter=0.000000e+000 result=40 07:24:49 Config A/D Result=40 07:24:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:49 Get A/D filter: -9.255963e+061 result=40 07:24:49 Get A/D value=-858993460 result=40 07:24:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:49 Aux= 07:24:49 Message to Camera, serial 213938 queued 07:25:26 Received message from Master: op=PointingHead serial=213951 07:25:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:25:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:25:26 Point started: ret=0 07:25:26 point_skyscan result=0 07:25:27 Check angles 07:25:27 SkyScan query 07:25:27 SkyScan query done: ret=0 az=153.225<-10215 ze=8.94<-11404 Statuses=0009 0009 07:25:27 Msec=0 True Az=153.225 Ze=8.94 Az status=0009 Ze status=0009 07:25:28 Check angles 07:25:28 SkyScan query 07:25:28 SkyScan query done: ret=0 az=135.75<-9050 ze=-12.045<-12803 Statuses=0009 0009 07:25:28 Msec=750 True Az=135.75 Ze=-12.045 Az status=0009 Ze status=0009 07:25:28 Check angles 07:25:28 SkyScan query 07:25:29 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.955<-14197 Statuses=0009 0009 07:25:29 Msec=1500 True Az=118.26 Ze=-32.955 Az status=0009 Ze status=0009 07:25:29 Check angles 07:25:29 SkyScan query 07:25:30 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.51<-15434 Statuses=0009 0009 07:25:30 Msec=2250 True Az=100.845 Ze=-51.51 Az status=0009 Ze status=0009 07:25:30 Check angles 07:25:30 SkyScan query 07:25:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 07:25:30 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 07:25:31 Check angles 07:25:31 SkyScan query 07:25:31 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 07:25:31 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 07:25:31 Message to Master queued w/err=0: serial=213951 error=0 07:25:36 Received message from Master: op=Filter serial=213952 07:25:36 Color wheel filter change from 0 to 0 07:25:36 FLIGetFilterPos err=0 currentPosition=0 07:25:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:36 Filter is already there-color wheel unchanged 07:25:36 Received message from Master: op=Shutter serial=213953 07:25:36 Shutter LASER close 07:25:36 Received message from Camera: op=State serial=213955 07:25:36 GetSingleValue result=40 Value=cccccccc 07:25:36 SkyScan query 07:25:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:25:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:37 Parameters OK 07:25:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:37 Set A/D data flow result=40 07:25:37 Set A/D channel type result=40 07:25:37 Set A/D encoding result=40 07:25:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:37 Set channel filter=0.000000e+000 result=40 07:25:37 Config A/D Result=40 07:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:37 Get A/D filter: -9.255963e+061 result=40 07:25:37 Get A/D value=-858993460 result=40 07:25:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:37 Parameters OK 07:25:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:37 Set A/D data flow result=40 07:25:37 Set A/D channel type result=40 07:25:37 Set A/D encoding result=40 07:25:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:37 Set channel filter=0.000000e+000 result=40 07:25:37 Config A/D Result=40 07:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:37 Get A/D filter: -9.255963e+061 result=40 07:25:37 Get A/D value=-858993460 result=40 07:25:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:37 Aux= 07:25:37 Message to Camera, serial 213955 queued 07:26:14 Received message from Master: op=PointingHead serial=213968 07:26:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:26:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:26:14 Point started: ret=0 07:26:14 point_skyscan result=0 07:26:15 Check angles 07:26:15 SkyScan query 07:26:16 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.105<-17407 Statuses=0009 0009 07:26:16 Msec=0 True Az=108.87 Ze=-81.105 Az status=0009 Ze status=0009 07:26:16 Check angles 07:26:16 SkyScan query [UTC 2018-12-17 07:26:16] 07:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 07:26:16 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 07:26:16 Check angles 07:26:16 SkyScan query 07:26:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.03<-20202 Statuses=0008 0009 07:26:17 Msec=1500 True Az=112.995 Ze=-123.03 Az status=0008 Ze status=0009 07:26:17 Check angles 07:26:17 SkyScan query 07:26:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 07:26:18 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 07:26:18 Check angles 07:26:18 SkyScan query 07:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.94<-22996 Statuses=0008 0009 07:26:19 Msec=3000 True Az=112.995 Ze=-164.94 Az status=0008 Ze status=0009 07:26:19 Check angles 07:26:19 SkyScan query 07:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:26:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:26:19 Message to Master queued w/err=0: serial=213968 error=0 07:26:24 Received message from Master: op=Filter serial=213969 07:26:24 Color wheel filter change from 0 to 0 07:26:24 FLIGetFilterPos err=0 currentPosition=0 07:26:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:24 Filter is already there-color wheel unchanged 07:26:24 Received message from Master: op=Shutter serial=213970 07:26:24 Shutter LASER open 07:26:25 Received message from Camera: op=State serial=213972 07:26:25 GetSingleValue result=40 Value=cccccccc 07:26:25 SkyScan query 07:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:26:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:25 Parameters OK 07:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:25 Set A/D data flow result=40 07:26:25 Set A/D channel type result=40 07:26:25 Set A/D encoding result=40 07:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:25 Set channel filter=0.000000e+000 result=40 07:26:25 Config A/D Result=40 07:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:25 Get A/D filter: -9.255963e+061 result=40 07:26:25 Get A/D value=-858993460 result=40 07:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:25 Parameters OK 07:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:25 Set A/D data flow result=40 07:26:25 Set A/D channel type result=40 07:26:25 Set A/D encoding result=40 07:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:25 Set channel filter=0.000000e+000 result=40 07:26:25 Config A/D Result=40 07:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:25 Get A/D filter: -9.255963e+061 result=40 07:26:25 Get A/D value=-858993460 result=40 07:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:25 Aux= 07:26:25 Message to Camera, serial 213972 queued 07:26:34 Received message from Master: op=Shutter serial=213982 07:26:34 Shutter LASER close 07:26:34 Received message from Master: op=PointingHead serial=213986 07:26:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:26:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:26:34 Point started: ret=0 07:26:34 point_skyscan result=0 07:26:35 Check angles 07:26:35 SkyScan query 07:26:36 SkyScan query done: ret=0 az=89.88<-5992 ze=157.215<-1519 Statuses=0009 0009 07:26:36 Msec=0 True Az=89.88 Ze=157.215 Az status=0009 Ze status=0009 07:26:36 Check angles 07:26:36 SkyScan query 07:26:36 SkyScan query done: ret=0 az=72.45<-4830 ze=136.275<-2915 Statuses=0009 0009 07:26:36 Msec=750 True Az=72.45 Ze=136.275 Az status=0009 Ze status=0009 07:26:37 Check angles 07:26:37 SkyScan query 07:26:37 SkyScan query done: ret=0 az=54.75<-3650 ze=114.87<-4342 Statuses=0009 0009 07:26:37 Msec=1500 True Az=54.75 Ze=114.87 Az status=0009 Ze status=0009 07:26:37 Check angles 07:26:37 SkyScan query 07:26:38 SkyScan query done: ret=0 az=40.905<-2727 ze=93.93<-5738 Statuses=0009 0009 07:26:38 Msec=2250 True Az=40.905 Ze=93.93 Az status=0009 Ze status=0009 07:26:38 Check angles 07:26:38 SkyScan query 07:26:39 SkyScan query done: ret=0 az=40.995<-2733 ze=72.93<-7138 Statuses=0008 0009 07:26:39 Msec=3000 True Az=40.995 Ze=72.93 Az status=0008 Ze status=0009 07:26:39 Check angles 07:26:39 SkyScan query 07:26:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 07:26:39 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 07:26:40 Check angles 07:26:40 SkyScan query 07:26:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:26:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:26:40 Message to Master queued w/err=0: serial=213986 error=0 07:26:45 Received message from Master: op=Filter serial=213987 07:26:45 Color wheel filter change from 0 to 0 07:26:45 FLIGetFilterPos err=0 currentPosition=0 07:26:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:45 Filter is already there-color wheel unchanged 07:26:45 Received message from Master: op=Shutter serial=213988 07:26:45 Shutter LASER close 07:26:46 Received message from Camera: op=State serial=213990 07:26:46 GetSingleValue result=40 Value=cccccccc 07:26:46 SkyScan query 07:26:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:26:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:46 Parameters OK 07:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:46 Set A/D data flow result=40 07:26:46 Set A/D channel type result=40 07:26:46 Set A/D encoding result=40 07:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:46 Set channel filter=0.000000e+000 result=40 07:26:46 Config A/D Result=40 07:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:46 Get A/D filter: -9.255963e+061 result=40 07:26:46 Get A/D value=-858993460 result=40 07:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:46 Parameters OK 07:26:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:46 Set A/D data flow result=40 07:26:46 Set A/D channel type result=40 07:26:46 Set A/D encoding result=40 07:26:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:46 Set channel filter=0.000000e+000 result=40 07:26:46 Config A/D Result=40 07:26:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:46 Get A/D filter: -9.255963e+061 result=40 07:26:46 Get A/D value=-858993460 result=40 07:26:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:46 Aux= 07:26:46 Message to Camera, serial 213990 queued 07:27:22 Received message from Master: op=PointingHead serial=214002 07:27:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:27:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:27:22 Point started: ret=0 07:27:22 point_skyscan result=0 07:27:23 Check angles 07:27:23 SkyScan query 07:27:24 SkyScan query done: ret=0 az=63.915<-4261 ze=66.51<-7566 Statuses=0009 0008 07:27:24 Msec=0 True Az=63.915 Ze=66.51 Az status=0009 Ze status=0008 07:27:24 Check angles 07:27:24 SkyScan query 07:27:25 SkyScan query done: ret=0 az=81.84<-5456 ze=66.51<-7566 Statuses=0009 0008 07:27:25 Msec=750 True Az=81.84 Ze=66.51 Az status=0009 Ze status=0008 07:27:25 Check angles 07:27:25 SkyScan query 07:27:25 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 07:27:25 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 07:27:26 Check angles 07:27:26 SkyScan query 07:27:26 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 07:27:26 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 07:27:26 Check angles 07:27:26 SkyScan query 07:27:27 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 07:27:27 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 07:27:27 Check angles 07:27:27 SkyScan query 07:27:28 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 07:27:28 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 07:27:28 Check angles 07:27:28 SkyScan query 07:27:28 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:27:28 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:27:28 Message to Master queued w/err=0: serial=214002 error=0 07:27:33 Received message from Master: op=Filter serial=214003 07:27:33 Color wheel filter change from 0 to 0 07:27:33 FLIGetFilterPos err=0 currentPosition=0 07:27:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:33 Filter is already there-color wheel unchanged 07:27:34 Received message from Master: op=Shutter serial=214004 07:27:34 Shutter LASER close 07:27:34 Received message from Camera: op=State serial=214006 07:27:34 GetSingleValue result=40 Value=cccccccc 07:27:34 SkyScan query 07:27:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:27:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:34 Parameters OK 07:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:34 Set A/D data flow result=40 07:27:34 Set A/D channel type result=40 07:27:34 Set A/D encoding result=40 07:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:34 Set channel filter=0.000000e+000 result=40 07:27:34 Config A/D Result=40 07:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:34 Get A/D filter: -9.255963e+061 result=40 07:27:34 Get A/D value=-858993460 result=40 07:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:34 Parameters OK 07:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:34 Set A/D data flow result=40 07:27:34 Set A/D channel type result=40 07:27:34 Set A/D encoding result=40 07:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:34 Set channel filter=0.000000e+000 result=40 07:27:34 Config A/D Result=40 07:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:34 Get A/D filter: -9.255963e+061 result=40 07:27:34 Get A/D value=-858993460 result=40 07:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:34 Aux= 07:27:34 Message to Camera, serial 214006 queued 07:28:11 Received message from Master: op=PointingHead serial=214019 07:28:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:28:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:28:11 Point started: ret=0 07:28:11 point_skyscan result=0 07:28:12 Check angles 07:28:12 SkyScan query 07:28:13 SkyScan query done: ret=0 az=134.61<-8974 ze=96.615<-5559 Statuses=0009 0009 07:28:13 Msec=0 True Az=134.61 Ze=96.615 Az status=0009 Ze status=0009 07:28:13 Check angles 07:28:13 SkyScan query 07:28:14 SkyScan query done: ret=0 az=130.995<-8733 ze=117.975<-4135 Statuses=0008 0009 07:28:14 Msec=750 True Az=130.995 Ze=117.975 Az status=0008 Ze status=0009 07:28:14 Check angles 07:28:14 SkyScan query 07:28:14 SkyScan query done: ret=0 az=130.995<-8733 ze=138.96<-2736 Statuses=0008 0009 07:28:14 Msec=1500 True Az=130.995 Ze=138.96 Az status=0008 Ze status=0009 07:28:14 Check angles 07:28:14 SkyScan query 07:28:15 SkyScan query done: ret=0 az=130.995<-8733 ze=159.9<-1340 Statuses=0008 0009 07:28:15 Msec=2250 True Az=130.995 Ze=159.9 Az status=0008 Ze status=0009 07:28:15 Check angles 07:28:15 SkyScan query 07:28:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.13<-23942 Statuses=0008 0009 07:28:16 Msec=3000 True Az=130.995 Ze=-179.13 Az status=0008 Ze status=0009 07:28:16 Check angles 07:28:16 SkyScan query 07:28:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.19<-22546 Statuses=0008 0009 07:28:17 Msec=3750 True Az=130.995 Ze=-158.19 Az status=0008 Ze status=0009 07:28:17 Check angles 07:28:17 SkyScan query 07:28:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 07:28:17 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 07:28:17 Check angles 07:28:17 SkyScan query 07:28:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:28:18 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:28:18 Message to Master queued w/err=0: serial=214019 error=0 07:28:23 Received message from Master: op=Filter serial=214020 07:28:23 Color wheel filter change from 0 to 0 07:28:23 FLIGetFilterPos err=0 currentPosition=0 07:28:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:23 Filter is already there-color wheel unchanged 07:28:23 Received message from Master: op=Shutter serial=214021 07:28:23 Shutter LASER close 07:28:23 Received message from Camera: op=State serial=214023 07:28:23 GetSingleValue result=40 Value=cccccccc 07:28:23 SkyScan query 07:28:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:28:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:24 Parameters OK 07:28:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:24 Set A/D data flow result=40 07:28:24 Set A/D channel type result=40 07:28:24 Set A/D encoding result=40 07:28:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:24 Set channel filter=0.000000e+000 result=40 07:28:24 Config A/D Result=40 07:28:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:24 Get A/D filter: -9.255963e+061 result=40 07:28:24 Get A/D value=-858993460 result=40 07:28:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:24 Parameters OK 07:28:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:24 Set A/D data flow result=40 07:28:24 Set A/D channel type result=40 07:28:24 Set A/D encoding result=40 07:28:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:24 Set channel filter=0.000000e+000 result=40 07:28:24 Config A/D Result=40 07:28:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:24 Get A/D filter: -9.255963e+061 result=40 07:28:24 Get A/D value=-858993460 result=40 07:28:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:24 Aux= 07:28:24 Message to Camera, serial 214023 queued 07:29:01 Received message from Master: op=PointingHead serial=214036 07:29:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:29:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:29:01 Point started: ret=0 07:29:01 point_skyscan result=0 07:29:02 Check angles 07:29:02 SkyScan query 07:29:02 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 07:29:02 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 07:29:03 Check angles 07:29:03 SkyScan query 07:29:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 07:29:03 Msec=750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 07:29:03 Message to Master queued w/err=0: serial=214036 error=0 07:29:08 Received message from Master: op=Filter serial=214037 07:29:08 Color wheel filter change from 0 to 0 07:29:08 FLIGetFilterPos err=0 currentPosition=0 07:29:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:08 Filter is already there-color wheel unchanged 07:29:08 Received message from Master: op=Shutter serial=214038 07:29:08 Shutter LASER open 07:29:08 Received message from Camera: op=State serial=214040 07:29:08 GetSingleValue result=40 Value=cccccccc 07:29:08 SkyScan query 07:29:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:29:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:09 Parameters OK 07:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:09 Set A/D data flow result=40 07:29:09 Set A/D channel type result=40 07:29:09 Set A/D encoding result=40 07:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:09 Set channel filter=0.000000e+000 result=40 07:29:09 Config A/D Result=40 07:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:09 Get A/D filter: -9.255963e+061 result=40 07:29:09 Get A/D value=-858993460 result=40 07:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:09 Parameters OK 07:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:09 Set A/D data flow result=40 07:29:09 Set A/D channel type result=40 07:29:09 Set A/D encoding result=40 07:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:09 Set channel filter=0.000000e+000 result=40 07:29:09 Config A/D Result=40 07:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:09 Get A/D filter: -9.255963e+061 result=40 07:29:09 Get A/D value=-858993460 result=40 07:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-173.009995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:09 Aux= 07:29:09 Message to Camera, serial 214040 queued 07:29:17 Received message from Master: op=Shutter serial=214050 07:29:17 Shutter LASER close 07:29:18 Received message from Master: op=PointingHead serial=214054 07:29:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:29:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:29:18 Point started: ret=0 07:29:18 point_skyscan result=0 07:29:19 Check angles 07:29:19 SkyScan query 07:29:20 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.995<-21533 Statuses=0009 0009 07:29:20 Msec=0 True Az=136.155 Ze=-142.995 Az status=0009 Ze status=0009 07:29:20 Check angles 07:29:20 SkyScan query 07:29:20 SkyScan query done: ret=0 az=153.75<-10250 ze=-122.01<-20134 Statuses=0009 0009 07:29:20 Msec=750 True Az=153.75 Ze=-122.01 Az status=0009 Ze status=0009 07:29:21 Check angles 07:29:21 SkyScan query 07:29:21 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.13<-18742 Statuses=0009 0009 07:29:21 Msec=1500 True Az=171.18 Ze=-101.13 Az status=0009 Ze status=0009 07:29:21 Check angles 07:29:21 SkyScan query 07:29:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.175<-17345 Statuses=0008 0009 07:29:22 Msec=2250 True Az=175.995 Ze=-80.175 Az status=0008 Ze status=0009 07:29:22 Check angles 07:29:22 SkyScan query 07:29:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.19<-15946 Statuses=0008 0009 07:29:23 Msec=3000 True Az=175.995 Ze=-59.19 Az status=0008 Ze status=0009 07:29:23 Check angles 07:29:23 SkyScan query 07:29:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:29:23 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:29:23 Message to Master queued w/err=0: serial=214054 error=0 07:29:28 Received message from Master: op=Filter serial=214055 07:29:28 Color wheel filter change from 0 to 0 07:29:28 FLIGetFilterPos err=0 currentPosition=0 07:29:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:28 Filter is already there-color wheel unchanged 07:29:29 Received message from Master: op=Shutter serial=214056 07:29:29 Shutter LASER close 07:29:29 Received message from Camera: op=State serial=214058 07:29:29 GetSingleValue result=40 Value=cccccccc 07:29:29 SkyScan query 07:29:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:29:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:29 Parameters OK 07:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:29 Set A/D data flow result=40 07:29:29 Set A/D channel type result=40 07:29:29 Set A/D encoding result=40 07:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:29 Set channel filter=0.000000e+000 result=40 07:29:29 Config A/D Result=40 07:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:29 Get A/D filter: -9.255963e+061 result=40 07:29:29 Get A/D value=-858993460 result=40 07:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:29 Parameters OK 07:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:29 Set A/D data flow result=40 07:29:29 Set A/D channel type result=40 07:29:29 Set A/D encoding result=40 07:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:29 Set channel filter=0.000000e+000 result=40 07:29:29 Config A/D Result=40 07:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:29 Get A/D filter: -9.255963e+061 result=40 07:29:29 Get A/D value=-858993460 result=40 07:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:29 Aux= 07:29:29 Message to Camera, serial 214058 queued 07:30:06 Received message from Master: op=PointingHead serial=214071 07:30:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:30:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:30:07 Point started: ret=0 07:30:07 point_skyscan result=0 07:30:07 Check angles 07:30:07 SkyScan query 07:30:08 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.48<-13432 Statuses=0009 0009 07:30:08 Msec=0 True Az=152.76 Ze=-21.48 Az status=0009 Ze status=0009 07:30:08 Check angles 07:30:08 SkyScan query 07:30:09 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.465<-12031 Statuses=0009 0009 07:30:09 Msec=750 True Az=135.3 Ze=-0.465 Az status=0009 Ze status=0009 07:30:09 Check angles 07:30:09 SkyScan query 07:30:09 SkyScan query done: ret=0 az=117.435<-7829 ze=20.94<-10604 Statuses=0009 0009 07:30:09 Msec=1500 True Az=117.435 Ze=20.94 Az status=0009 Ze status=0009 07:30:10 Check angles 07:30:10 SkyScan query 07:30:10 SkyScan query done: ret=0 az=100.08<-6672 ze=41.85<-9210 Statuses=0009 0009 07:30:10 Msec=2250 True Az=100.08 Ze=41.85 Az status=0009 Ze status=0009 07:30:10 Check angles 07:30:10 SkyScan query 07:30:11 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 07:30:11 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 07:30:11 Check angles 07:30:11 SkyScan query 07:30:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:30:12 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:30:12 Message to Master queued w/err=0: serial=214071 error=0 07:30:17 Received message from Master: op=Filter serial=214072 07:30:17 Color wheel filter change from 0 to 0 07:30:17 FLIGetFilterPos err=0 currentPosition=0 07:30:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:17 Filter is already there-color wheel unchanged 07:30:17 Received message from Master: op=Shutter serial=214073 07:30:17 Shutter LASER close 07:30:17 Received message from Camera: op=State serial=214075 07:30:17 GetSingleValue result=40 Value=cccccccc 07:30:17 SkyScan query 07:30:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:30:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:17 Parameters OK 07:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:17 Set A/D data flow result=40 07:30:17 Set A/D channel type result=40 07:30:17 Set A/D encoding result=40 07:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:17 Set channel filter=0.000000e+000 result=40 07:30:17 Config A/D Result=40 07:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:17 Get A/D filter: -9.255963e+061 result=40 07:30:17 Get A/D value=-858993460 result=40 07:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:17 Parameters OK 07:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:17 Set A/D data flow result=40 07:30:17 Set A/D channel type result=40 07:30:17 Set A/D encoding result=40 07:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:17 Set channel filter=0.000000e+000 result=40 07:30:17 Config A/D Result=40 07:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:17 Get A/D filter: -9.255963e+061 result=40 07:30:17 Get A/D value=-858993460 result=40 07:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:17 Aux= 07:30:17 Message to Camera, serial 214075 queued 07:30:54 Received message from Master: op=PointingHead serial=214088 07:30:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:30:54 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:30:55 Point started: ret=0 07:30:55 point_skyscan result=0 07:30:55 Check angles 07:30:55 SkyScan query 07:30:56 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 07:30:56 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 07:30:56 Check angles 07:30:56 SkyScan query 07:30:57 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 07:30:57 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 07:30:57 Check angles 07:30:57 SkyScan query 07:30:57 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 07:30:57 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 07:30:58 Check angles 07:30:58 SkyScan query 07:30:58 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 07:30:58 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 07:30:58 Check angles 07:30:58 SkyScan query 07:30:59 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:30:59 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:30:59 Check angles 07:30:59 SkyScan query 07:31:00 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:31:00 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:31:00 Message to Master queued w/err=0: serial=214088 error=0 07:31:05 Received message from Master: op=Filter serial=214089 07:31:05 Color wheel filter change from 0 to 0 07:31:05 FLIGetFilterPos err=0 currentPosition=0 07:31:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:05 Filter is already there-color wheel unchanged 07:31:05 Received message from Master: op=Shutter serial=214090 07:31:05 Shutter LASER close 07:31:05 Received message from Camera: op=State serial=214092 07:31:05 GetSingleValue result=40 Value=cccccccc 07:31:05 SkyScan query 07:31:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:31:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:06 Parameters OK 07:31:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:06 Set A/D data flow result=40 07:31:06 Set A/D channel type result=40 07:31:06 Set A/D encoding result=40 07:31:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:06 Set channel filter=0.000000e+000 result=40 07:31:06 Config A/D Result=40 07:31:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:06 Get A/D filter: -9.255963e+061 result=40 07:31:06 Get A/D value=-858993460 result=40 07:31:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:06 Parameters OK 07:31:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:06 Set A/D data flow result=40 07:31:06 Set A/D channel type result=40 07:31:06 Set A/D encoding result=40 07:31:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:06 Set channel filter=0.000000e+000 result=40 07:31:06 Config A/D Result=40 07:31:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:06 Get A/D filter: -9.255963e+061 result=40 07:31:06 Get A/D value=-858993460 result=40 07:31:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:06 Aux= 07:31:06 Message to Camera, serial 214092 queued 07:31:42 Received message from Master: op=PointingHead serial=214105 07:31:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:31:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:31:43 Point started: ret=0 07:31:43 point_skyscan result=0 07:31:43 Check angles 07:31:43 SkyScan query 07:31:44 SkyScan query done: ret=0 az=152.73<-10182 ze=8.28<-11448 Statuses=0009 0009 07:31:44 Msec=0 True Az=152.73 Ze=8.28 Az status=0009 Ze status=0009 07:31:44 Check angles 07:31:44 SkyScan query 07:31:45 SkyScan query done: ret=0 az=134.88<-8992 ze=-13.065<-12871 Statuses=0009 0009 07:31:45 Msec=750 True Az=134.88 Ze=-13.065 Az status=0009 Ze status=0009 07:31:45 Check angles 07:31:45 SkyScan query 07:31:46 SkyScan query done: ret=0 az=117.36<-7824 ze=-34.05<-14270 Statuses=0009 0009 07:31:46 Msec=1500 True Az=117.36 Ze=-34.05 Az status=0009 Ze status=0009 07:31:46 Check angles 07:31:46 SkyScan query 07:31:46 SkyScan query done: ret=0 az=99.57<-6638 ze=-51.555<-15437 Statuses=0009 0009 07:31:46 Msec=2250 True Az=99.57 Ze=-51.555 Az status=0009 Ze status=0009 07:31:47 Check angles 07:31:47 SkyScan query 07:31:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 07:31:47 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 07:31:47 Check angles 07:31:47 SkyScan query 07:31:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:31:48 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:31:48 Message to Master queued w/err=0: serial=214105 error=0 07:31:53 Received message from Master: op=Filter serial=214106 07:31:53 Color wheel filter change from 0 to 0 07:31:53 FLIGetFilterPos err=0 currentPosition=0 07:31:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:53 Filter is already there-color wheel unchanged 07:31:53 Received message from Master: op=Shutter serial=214107 07:31:53 Shutter LASER close 07:31:53 Received message from Camera: op=State serial=214109 07:31:53 GetSingleValue result=40 Value=cccccccc 07:31:53 SkyScan query 07:31:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:31:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:54 Parameters OK 07:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:54 Set A/D data flow result=40 07:31:54 Set A/D channel type result=40 07:31:54 Set A/D encoding result=40 07:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:54 Set channel filter=0.000000e+000 result=40 07:31:54 Config A/D Result=40 07:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:54 Get A/D filter: -9.255963e+061 result=40 07:31:54 Get A/D value=-858993460 result=40 07:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:54 Parameters OK 07:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:54 Set A/D data flow result=40 07:31:54 Set A/D channel type result=40 07:31:54 Set A/D encoding result=40 07:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:54 Set channel filter=0.000000e+000 result=40 07:31:54 Config A/D Result=40 07:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:54 Get A/D filter: -9.255963e+061 result=40 07:31:54 Get A/D value=-858993460 result=40 07:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:54 Aux= 07:31:54 Message to Camera, serial 214109 queued 07:32:30 Received message from Master: op=PointingHead serial=214121 07:32:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:32:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:32:30 Point started: ret=0 07:32:30 point_skyscan result=0 07:32:31 Check angles 07:32:31 SkyScan query 07:32:31 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.3<-17420 Statuses=0009 0009 07:32:31 Msec=0 True Az=109.11 Ze=-81.3 Az status=0009 Ze status=0009 07:32:31 Check angles 07:32:31 SkyScan query 07:32:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 07:32:32 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 07:32:32 Check angles 07:32:32 SkyScan query 07:32:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 07:32:33 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 07:32:33 Check angles 07:32:33 SkyScan query 07:32:34 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.57<-21638 Statuses=0008 0009 07:32:34 Msec=2250 True Az=112.98 Ze=-144.57 Az status=0008 Ze status=0009 07:32:34 Check angles 07:32:34 SkyScan query 07:32:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 07:32:34 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 07:32:34 Check angles 07:32:34 SkyScan query 07:32:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:32:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:32:35 Message to Master queued w/err=0: serial=214121 error=0 07:32:40 Received message from Master: op=Filter serial=214122 07:32:40 Color wheel filter change from 0 to 0 07:32:40 FLIGetFilterPos err=0 currentPosition=0 07:32:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:40 Filter is already there-color wheel unchanged 07:32:40 Received message from Master: op=Shutter serial=214123 07:32:40 Shutter LASER open 07:32:40 Received message from Camera: op=State serial=214125 07:32:40 GetSingleValue result=40 Value=cccccccc 07:32:40 SkyScan query 07:32:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:32:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:41 Parameters OK 07:32:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:41 Set A/D data flow result=40 07:32:41 Set A/D channel type result=40 07:32:41 Set A/D encoding result=40 07:32:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:41 Set channel filter=0.000000e+000 result=40 07:32:41 Config A/D Result=40 07:32:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:41 Get A/D filter: -9.255963e+061 result=40 07:32:41 Get A/D value=-858993460 result=40 07:32:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:41 Parameters OK 07:32:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:41 Set A/D data flow result=40 07:32:41 Set A/D channel type result=40 07:32:41 Set A/D encoding result=40 07:32:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:41 Set channel filter=0.000000e+000 result=40 07:32:41 Config A/D Result=40 07:32:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:41 Get A/D filter: -9.255963e+061 result=40 07:32:41 Get A/D value=-858993460 result=40 07:32:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:41 Aux= 07:32:41 Message to Camera, serial 214125 queued 07:32:49 Received message from Master: op=Shutter serial=214135 07:32:49 Shutter LASER close 07:32:50 Received message from Master: op=PointingHead serial=214139 07:32:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:32:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:32:50 Point started: ret=0 07:32:50 point_skyscan result=0 07:32:51 Check angles 07:32:51 SkyScan query 07:32:51 SkyScan query done: ret=0 az=89.82<-5988 ze=157.11<-1526 Statuses=0009 0009 07:32:51 Msec=0 True Az=89.82 Ze=157.11 Az status=0009 Ze status=0009 07:32:52 Check angles 07:32:52 SkyScan query 07:32:52 SkyScan query done: ret=0 az=72.3<-4820 ze=136.17<-2922 Statuses=0009 0009 07:32:52 Msec=750 True Az=72.3 Ze=136.17 Az status=0009 Ze status=0009 07:32:52 Check angles 07:32:52 SkyScan query 07:32:53 SkyScan query done: ret=0 az=54.975<-3665 ze=115.23<-4318 Statuses=0009 0009 07:32:53 Msec=1500 True Az=54.975 Ze=115.23 Az status=0009 Ze status=0009 07:32:53 Check angles 07:32:53 SkyScan query 07:32:54 SkyScan query done: ret=0 az=40.875<-2725 ze=94.275<-5715 Statuses=0009 0009 07:32:54 Msec=2250 True Az=40.875 Ze=94.275 Az status=0009 Ze status=0009 07:32:54 Check angles 07:32:54 SkyScan query 07:32:54 SkyScan query done: ret=0 az=40.98<-2732 ze=73.29<-7114 Statuses=0008 0009 07:32:54 Msec=3000 True Az=40.98 Ze=73.29 Az status=0008 Ze status=0009 07:32:55 Check angles 07:32:55 SkyScan query 07:32:55 SkyScan query done: ret=0 az=40.98<-2732 ze=52.77<-8482 Statuses=0008 0009 07:32:55 Msec=3750 True Az=40.98 Ze=52.77 Az status=0008 Ze status=0009 07:32:55 Check angles 07:32:55 SkyScan query 07:32:56 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 07:32:56 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 07:32:56 Message to Master queued w/err=0: serial=214139 error=0 07:33:01 Received message from Master: op=Filter serial=214140 07:33:01 Color wheel filter change from 0 to 0 07:33:01 FLIGetFilterPos err=0 currentPosition=0 07:33:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:01 Filter is already there-color wheel unchanged 07:33:01 Received message from Master: op=Shutter serial=214141 07:33:01 Shutter LASER close 07:33:01 Received message from Camera: op=State serial=214143 07:33:01 GetSingleValue result=40 Value=cccccccc 07:33:01 SkyScan query 07:33:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:33:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:02 Parameters OK 07:33:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:02 Set A/D data flow result=40 07:33:02 Set A/D channel type result=40 07:33:02 Set A/D encoding result=40 07:33:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:02 Set channel filter=0.000000e+000 result=40 07:33:02 Config A/D Result=40 07:33:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:02 Get A/D filter: -9.255963e+061 result=40 07:33:02 Get A/D value=-858993460 result=40 07:33:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:02 Parameters OK 07:33:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:02 Set A/D data flow result=40 07:33:02 Set A/D channel type result=40 07:33:02 Set A/D encoding result=40 07:33:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:02 Set channel filter=0.000000e+000 result=40 07:33:02 Config A/D Result=40 07:33:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:02 Get A/D filter: -9.255963e+061 result=40 07:33:02 Get A/D value=-858993460 result=40 07:33:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:02 Aux= 07:33:02 Message to Camera, serial 214143 queued 07:33:39 Received message from Master: op=PointingHead serial=214156 07:33:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:33:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:33:39 Point started: ret=0 07:33:39 point_skyscan result=0 07:33:40 Check angles 07:33:40 SkyScan query 07:33:40 SkyScan query done: ret=0 az=64.185<-4279 ze=66.51<-7566 Statuses=0009 0008 07:33:40 Msec=0 True Az=64.185 Ze=66.51 Az status=0009 Ze status=0008 07:33:41 Check angles 07:33:41 SkyScan query 07:33:41 SkyScan query done: ret=0 az=81.66<-5444 ze=66.51<-7566 Statuses=0009 0008 07:33:41 Msec=750 True Az=81.66 Ze=66.51 Az status=0009 Ze status=0008 07:33:41 Check angles 07:33:41 SkyScan query 07:33:42 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 07:33:42 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 07:33:42 Check angles 07:33:42 SkyScan query 07:33:43 SkyScan query done: ret=0 az=117.075<-7805 ze=66.495<-7567 Statuses=0009 0008 07:33:43 Msec=2250 True Az=117.075 Ze=66.495 Az status=0009 Ze status=0008 07:33:43 Check angles 07:33:43 SkyScan query 07:33:43 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 07:33:43 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 07:33:44 Check angles 07:33:44 SkyScan query 07:33:44 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 07:33:44 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 07:33:44 Check angles 07:33:44 SkyScan query 07:33:45 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:33:45 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:33:45 Message to Master queued w/err=0: serial=214156 error=0 07:33:50 Received message from Master: op=Filter serial=214157 07:33:50 Color wheel filter change from 0 to 0 07:33:50 FLIGetFilterPos err=0 currentPosition=0 07:33:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:50 Filter is already there-color wheel unchanged 07:33:50 Received message from Master: op=Shutter serial=214158 07:33:50 Shutter LASER close 07:33:50 Received message from Camera: op=State serial=214160 07:33:50 GetSingleValue result=40 Value=cccccccc 07:33:50 SkyScan query 07:33:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:33:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:51 Parameters OK 07:33:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:51 Set A/D data flow result=40 07:33:51 Set A/D channel type result=40 07:33:51 Set A/D encoding result=40 07:33:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:51 Set channel filter=0.000000e+000 result=40 07:33:51 Config A/D Result=40 07:33:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:51 Get A/D filter: -9.255963e+061 result=40 07:33:51 Get A/D value=-858993460 result=40 07:33:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:51 Parameters OK 07:33:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:51 Set A/D data flow result=40 07:33:51 Set A/D channel type result=40 07:33:51 Set A/D encoding result=40 07:33:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:51 Set channel filter=0.000000e+000 result=40 07:33:51 Config A/D Result=40 07:33:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:51 Get A/D filter: -9.255963e+061 result=40 07:33:51 Get A/D value=-858993460 result=40 07:33:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:51 Aux= 07:33:51 Message to Camera, serial 214160 queued 07:34:28 Received message from Master: op=PointingHead serial=214173 07:34:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:34:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:34:28 Point started: ret=0 07:34:28 point_skyscan result=0 07:34:29 Check angles 07:34:29 SkyScan query 07:34:29 SkyScan query done: ret=0 az=135.27<-9018 ze=96.03<-5598 Statuses=0009 0009 07:34:29 Msec=0 True Az=135.27 Ze=96.03 Az status=0009 Ze status=0009 07:34:29 Check angles 07:34:29 SkyScan query 07:34:30 SkyScan query done: ret=0 az=130.995<-8733 ze=117.09<-4194 Statuses=0008 0009 07:34:30 Msec=750 True Az=130.995 Ze=117.09 Az status=0008 Ze status=0009 07:34:30 Check angles 07:34:30 SkyScan query 07:34:31 SkyScan query done: ret=0 az=130.98<-8732 ze=138.315<-2779 Statuses=0008 0009 07:34:31 Msec=1500 True Az=130.98 Ze=138.315 Az status=0008 Ze status=0009 07:34:31 Check angles 07:34:31 SkyScan query 07:34:32 SkyScan query done: ret=0 az=130.995<-8733 ze=159.735<-1351 Statuses=0008 0009 07:34:32 Msec=2250 True Az=130.995 Ze=159.735 Az status=0008 Ze status=0009 07:34:32 Check angles 07:34:32 SkyScan query 07:34:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.31<-23954 Statuses=0008 0009 07:34:32 Msec=3000 True Az=130.995 Ze=-179.31 Az status=0008 Ze status=0009 07:34:33 Check angles 07:34:33 SkyScan query 07:34:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.92<-22528 Statuses=0008 0009 07:34:33 Msec=3750 True Az=130.995 Ze=-157.92 Az status=0008 Ze status=0009 07:34:33 Check angles 07:34:33 SkyScan query 07:34:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 07:34:34 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 07:34:34 Check angles 07:34:34 SkyScan query 07:34:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:34:35 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:34:35 Message to Master queued w/err=0: serial=214173 error=0 07:34:40 Received message from Master: op=Filter serial=214174 07:34:40 Color wheel filter change from 0 to 0 07:34:40 FLIGetFilterPos err=0 currentPosition=0 07:34:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:40 Filter is already there-color wheel unchanged 07:34:40 Received message from Master: op=Shutter serial=214175 07:34:40 Shutter LASER close 07:34:40 Received message from Camera: op=State serial=214177 07:34:40 GetSingleValue result=40 Value=cccccccc 07:34:40 SkyScan query 07:34:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:34:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:40 Parameters OK 07:34:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:40 Set A/D data flow result=40 07:34:40 Set A/D channel type result=40 07:34:40 Set A/D encoding result=40 07:34:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:40 Set channel filter=0.000000e+000 result=40 07:34:40 Config A/D Result=40 07:34:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:40 Get A/D filter: -9.255963e+061 result=40 07:34:40 Get A/D value=-858993460 result=40 07:34:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:40 Parameters OK 07:34:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:40 Set A/D data flow result=40 07:34:40 Set A/D channel type result=40 07:34:40 Set A/D encoding result=40 07:34:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:40 Set channel filter=0.000000e+000 result=40 07:34:40 Config A/D Result=40 07:34:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:40 Get A/D filter: -9.255963e+061 result=40 07:34:40 Get A/D value=-858993460 result=40 07:34:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:40 Aux= 07:34:40 Message to Camera, serial 214177 queued 07:35:17 Received message from Master: op=PointingHead serial=214190 07:35:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:35:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:35:18 Point started: ret=0 07:35:18 point_skyscan result=0 07:35:18 Check angles 07:35:18 SkyScan query 07:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 07:35:19 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 07:35:19 Check angles 07:35:19 SkyScan query 07:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:35:20 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:35:20 Message to Master queued w/err=0: serial=214190 error=0 07:35:25 Received message from Master: op=Filter serial=214191 07:35:25 Color wheel filter change from 0 to 0 07:35:25 FLIGetFilterPos err=0 currentPosition=0 07:35:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:25 Filter is already there-color wheel unchanged 07:35:25 Received message from Master: op=Shutter serial=214192 07:35:25 Shutter LASER open 07:35:25 Received message from Camera: op=State serial=214194 07:35:25 GetSingleValue result=40 Value=cccccccc 07:35:25 SkyScan query 07:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:35:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:26 Parameters OK 07:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:26 Set A/D data flow result=40 07:35:26 Set A/D channel type result=40 07:35:26 Set A/D encoding result=40 07:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:26 Set channel filter=0.000000e+000 result=40 07:35:26 Config A/D Result=40 07:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:26 Get A/D filter: -9.255963e+061 result=40 07:35:26 Get A/D value=-858993460 result=40 07:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:26 Parameters OK 07:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:26 Set A/D data flow result=40 07:35:26 Set A/D channel type result=40 07:35:26 Set A/D encoding result=40 07:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:26 Set channel filter=0.000000e+000 result=40 07:35:26 Config A/D Result=40 07:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:26 Get A/D filter: -9.255963e+061 result=40 07:35:26 Get A/D value=-858993460 result=40 07:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:26 Aux= 07:35:26 Message to Camera, serial 214194 queued 07:35:34 Received message from Master: op=Shutter serial=214204 07:35:34 Shutter LASER close 07:35:35 Received message from Master: op=PointingHead serial=214208 07:35:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:35:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:35:35 Point started: ret=0 07:35:35 point_skyscan result=0 07:35:36 Check angles 07:35:36 SkyScan query 07:35:36 SkyScan query done: ret=0 az=136.365<-9091 ze=-143.04<-21536 Statuses=0009 0009 [UTC 2018-12-17 07:35:36] 07:35:36 Msec=0 True Az=136.365 Ze=-143.04 Az status=0009 Ze status=0009 07:35:37 Check angles 07:35:37 SkyScan query 07:35:37 SkyScan query done: ret=0 az=153.765<-10251 ze=-122.055<-20137 Statuses=0009 0009 07:35:37 Msec=750 True Az=153.765 Ze=-122.055 Az status=0009 Ze status=0009 07:35:37 Check angles 07:35:37 SkyScan query 07:35:38 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.175<-18745 Statuses=0009 0009 07:35:38 Msec=1500 True Az=171.195 Ze=-101.175 Az status=0009 Ze status=0009 07:35:38 Check angles 07:35:38 SkyScan query 07:35:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.22<-17348 Statuses=0008 0009 07:35:39 Msec=2250 True Az=175.995 Ze=-80.22 Az status=0008 Ze status=0009 07:35:39 Check angles 07:35:39 SkyScan query 07:35:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.25<-15950 Statuses=0008 0009 07:35:39 Msec=3000 True Az=175.995 Ze=-59.25 Az status=0008 Ze status=0009 07:35:40 Check angles 07:35:40 SkyScan query 07:35:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:35:40 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:35:40 Message to Master queued w/err=0: serial=214208 error=0 07:35:45 Received message from Master: op=Filter serial=214209 07:35:45 Color wheel filter change from 0 to 0 07:35:45 FLIGetFilterPos err=0 currentPosition=0 07:35:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:45 Filter is already there-color wheel unchanged 07:35:45 Received message from Master: op=Shutter serial=214210 07:35:45 Shutter LASER close 07:35:45 Received message from Camera: op=State serial=214212 07:35:45 GetSingleValue result=40 Value=cccccccc 07:35:45 SkyScan query 07:35:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:35:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:46 Parameters OK 07:35:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:46 Set A/D data flow result=40 07:35:46 Set A/D channel type result=40 07:35:46 Set A/D encoding result=40 07:35:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:46 Set channel filter=0.000000e+000 result=40 07:35:46 Config A/D Result=40 07:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:46 Get A/D filter: -9.255963e+061 result=40 07:35:46 Get A/D value=-858993460 result=40 07:35:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:46 Parameters OK 07:35:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:46 Set A/D data flow result=40 07:35:46 Set A/D channel type result=40 07:35:46 Set A/D encoding result=40 07:35:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:46 Set channel filter=0.000000e+000 result=40 07:35:46 Config A/D Result=40 07:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:46 Get A/D filter: -9.255963e+061 result=40 07:35:46 Get A/D value=-858993460 result=40 07:35:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:46 Aux= 07:35:46 Message to Camera, serial 214212 queued [UTC 2018-12-17 07:35:52] 07:36:23 Received message from Master: op=PointingHead serial=214225 07:36:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:36:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:36:23 Point started: ret=0 07:36:23 point_skyscan result=0 07:36:24 Check angles 07:36:24 SkyScan query 07:36:25 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.255<-13417 Statuses=0009 0009 07:36:25 Msec=0 True Az=152.655 Ze=-21.255 Az status=0009 Ze status=0009 07:36:25 Check angles 07:36:25 SkyScan query 07:36:25 SkyScan query done: ret=0 az=134.625<-8975 ze=0.12<-11992 Statuses=0009 0009 07:36:25 Msec=750 True Az=134.625 Ze=0.12 Az status=0009 Ze status=0009 07:36:26 Check angles 07:36:26 SkyScan query 07:36:26 SkyScan query done: ret=0 az=117.27<-7818 ze=21.15<-10590 Statuses=0009 0009 07:36:26 Msec=1500 True Az=117.27 Ze=21.15 Az status=0009 Ze status=0009 07:36:26 Check angles 07:36:26 SkyScan query 07:36:27 SkyScan query done: ret=0 az=99.885<-6659 ze=42.045<-9197 Statuses=0009 0009 07:36:27 Msec=2250 True Az=99.885 Ze=42.045 Az status=0009 Ze status=0009 07:36:27 Check angles 07:36:27 SkyScan query 07:36:28 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 07:36:28 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 07:36:28 Check angles 07:36:28 SkyScan query 07:36:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:36:28 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:36:28 Message to Master queued w/err=0: serial=214225 error=0 07:36:33 Received message from Master: op=Filter serial=214226 07:36:33 Color wheel filter change from 0 to 0 07:36:33 FLIGetFilterPos err=0 currentPosition=0 07:36:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:33 Filter is already there-color wheel unchanged 07:36:34 Received message from Master: op=Shutter serial=214227 07:36:34 Shutter LASER close 07:36:34 Received message from Camera: op=State serial=214229 07:36:34 GetSingleValue result=40 Value=cccccccc 07:36:34 SkyScan query 07:36:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:36:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:34 Parameters OK 07:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:34 Set A/D data flow result=40 07:36:34 Set A/D channel type result=40 07:36:34 Set A/D encoding result=40 07:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:34 Set channel filter=0.000000e+000 result=40 07:36:34 Config A/D Result=40 07:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:34 Get A/D filter: -9.255963e+061 result=40 07:36:34 Get A/D value=-858993460 result=40 07:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:34 Parameters OK 07:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:34 Set A/D data flow result=40 07:36:34 Set A/D channel type result=40 07:36:34 Set A/D encoding result=40 07:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:34 Set channel filter=0.000000e+000 result=40 07:36:34 Config A/D Result=40 07:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:34 Get A/D filter: -9.255963e+061 result=40 07:36:34 Get A/D value=-858993460 result=40 07:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:34 Aux= 07:36:34 Message to Camera, serial 214229 queued 07:37:11 Received message from Master: op=PointingHead serial=214242 07:37:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:37:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:37:11 Point started: ret=0 07:37:11 point_skyscan result=0 07:37:12 Check angles 07:37:12 SkyScan query 07:37:13 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 07:37:13 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 07:37:13 Check angles 07:37:13 SkyScan query 07:37:14 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 07:37:14 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 07:37:14 Check angles 07:37:14 SkyScan query 07:37:14 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 07:37:14 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 07:37:14 Check angles 07:37:14 SkyScan query 07:37:15 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 07:37:15 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 07:37:15 Check angles 07:37:15 SkyScan query 07:37:16 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:37:16 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:37:16 Check angles 07:37:16 SkyScan query 07:37:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:37:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:37:17 Message to Master queued w/err=0: serial=214242 error=0 07:37:22 Received message from Master: op=Filter serial=214243 07:37:22 Color wheel filter change from 0 to 0 07:37:22 FLIGetFilterPos err=0 currentPosition=0 07:37:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:22 Filter is already there-color wheel unchanged 07:37:22 Received message from Master: op=Shutter serial=214244 07:37:22 Shutter LASER close 07:37:22 Received message from Camera: op=State serial=214246 07:37:22 GetSingleValue result=40 Value=cccccccc 07:37:22 SkyScan query 07:37:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:37:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:22 Parameters OK 07:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:22 Set A/D data flow result=40 07:37:22 Set A/D channel type result=40 07:37:22 Set A/D encoding result=40 07:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:22 Set channel filter=0.000000e+000 result=40 07:37:22 Config A/D Result=40 07:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:22 Get A/D filter: -9.255963e+061 result=40 07:37:22 Get A/D value=-858993460 result=40 07:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:22 Parameters OK 07:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:22 Set A/D data flow result=40 07:37:22 Set A/D channel type result=40 07:37:22 Set A/D encoding result=40 07:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:22 Set channel filter=0.000000e+000 result=40 07:37:22 Config A/D Result=40 07:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:22 Get A/D filter: -9.255963e+061 result=40 07:37:22 Get A/D value=-858993460 result=40 07:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:22 Aux= 07:37:22 Message to Camera, serial 214246 queued 07:37:59 Received message from Master: op=PointingHead serial=214259 07:37:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:37:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:37:59 Point started: ret=0 07:37:59 point_skyscan result=0 07:38:00 Check angles 07:38:00 SkyScan query 07:38:01 SkyScan query done: ret=0 az=153.225<-10215 ze=8.94<-11404 Statuses=0009 0009 07:38:01 Msec=0 True Az=153.225 Ze=8.94 Az status=0009 Ze status=0009 07:38:01 Check angles 07:38:01 SkyScan query 07:38:02 SkyScan query done: ret=0 az=135.81<-9054 ze=-12.045<-12803 Statuses=0009 0009 07:38:02 Msec=750 True Az=135.81 Ze=-12.045 Az status=0009 Ze status=0009 07:38:02 Check angles 07:38:02 SkyScan query 07:38:02 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.97<-14198 Statuses=0009 0009 07:38:02 Msec=1500 True Az=118.26 Ze=-32.97 Az status=0009 Ze status=0009 07:38:02 Check angles 07:38:02 SkyScan query 07:38:03 SkyScan query done: ret=0 az=100.89<-6726 ze=-51.51<-15434 Statuses=0009 0009 07:38:03 Msec=2250 True Az=100.89 Ze=-51.51 Az status=0009 Ze status=0009 07:38:03 Check angles 07:38:03 SkyScan query 07:38:04 SkyScan query done: ret=0 az=85.965<-5731 ze=-51.54<-15436 Statuses=0009 0008 07:38:04 Msec=3000 True Az=85.965 Ze=-51.54 Az status=0009 Ze status=0008 07:38:04 Check angles 07:38:04 SkyScan query 07:38:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:38:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:38:05 Message to Master queued w/err=0: serial=214259 error=0 07:38:10 Received message from Master: op=Filter serial=214260 07:38:10 Color wheel filter change from 0 to 0 07:38:10 FLIGetFilterPos err=0 currentPosition=0 07:38:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:10 Filter is already there-color wheel unchanged 07:38:10 Received message from Master: op=Shutter serial=214261 07:38:10 Shutter LASER close 07:38:10 Received message from Camera: op=State serial=214263 07:38:10 GetSingleValue result=40 Value=cccccccc 07:38:10 SkyScan query 07:38:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:38:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:10 Parameters OK 07:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:10 Set A/D data flow result=40 07:38:10 Set A/D channel type result=40 07:38:10 Set A/D encoding result=40 07:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:10 Set channel filter=0.000000e+000 result=40 07:38:10 Config A/D Result=40 07:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:10 Get A/D filter: -9.255963e+061 result=40 07:38:10 Get A/D value=-858993460 result=40 07:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:10 Parameters OK 07:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:10 Set A/D data flow result=40 07:38:10 Set A/D channel type result=40 07:38:10 Set A/D encoding result=40 07:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:10 Set channel filter=0.000000e+000 result=40 07:38:10 Config A/D Result=40 07:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:10 Get A/D filter: -9.255963e+061 result=40 07:38:10 Get A/D value=-858993460 result=40 07:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:10 Aux= 07:38:10 Message to Camera, serial 214263 queued 07:38:47 Received message from Master: op=PointingHead serial=214276 07:38:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:38:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:38:48 Point started: ret=0 07:38:48 point_skyscan result=0 07:38:48 Check angles 07:38:48 SkyScan query 07:38:49 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.255<-17417 Statuses=0009 0009 07:38:49 Msec=0 True Az=109.005 Ze=-81.255 Az status=0009 Ze status=0009 07:38:49 Check angles 07:38:49 SkyScan query 07:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 07:38:50 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 07:38:50 Check angles 07:38:50 SkyScan query 07:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.615<-20241 Statuses=0008 0009 07:38:50 Msec=1500 True Az=112.995 Ze=-123.615 Az status=0008 Ze status=0009 07:38:51 Check angles 07:38:51 SkyScan query 07:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 07:38:51 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 07:38:51 Check angles 07:38:51 SkyScan query 07:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 07:38:52 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 07:38:52 Check angles 07:38:52 SkyScan query 07:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:38:53 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:38:53 Message to Master queued w/err=0: serial=214276 error=0 07:38:58 Received message from Master: op=Filter serial=214277 07:38:58 Color wheel filter change from 0 to 0 07:38:58 FLIGetFilterPos err=0 currentPosition=0 07:38:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:58 Filter is already there-color wheel unchanged 07:38:58 Received message from Master: op=Shutter serial=214278 07:38:58 Shutter LASER open 07:38:58 Received message from Camera: op=State serial=214280 07:38:58 GetSingleValue result=40 Value=cccccccc 07:38:58 SkyScan query 07:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:38:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:59 Parameters OK 07:38:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:59 Set A/D data flow result=40 07:38:59 Set A/D channel type result=40 07:38:59 Set A/D encoding result=40 07:38:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:59 Set channel filter=0.000000e+000 result=40 07:38:59 Config A/D Result=40 07:38:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:59 Get A/D filter: -9.255963e+061 result=40 07:38:59 Get A/D value=-858993460 result=40 07:38:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:59 Parameters OK 07:38:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:59 Set A/D data flow result=40 07:38:59 Set A/D channel type result=40 07:38:59 Set A/D encoding result=40 07:38:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:59 Set channel filter=0.000000e+000 result=40 07:38:59 Config A/D Result=40 07:38:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:59 Get A/D filter: -9.255963e+061 result=40 07:38:59 Get A/D value=-858993460 result=40 07:38:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:59 Aux= 07:38:59 Message to Camera, serial 214280 queued 07:39:07 Received message from Master: op=Shutter serial=214290 07:39:07 Shutter LASER close 07:39:07 Received message from Master: op=PointingHead serial=214294 07:39:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:39:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:39:08 Point started: ret=0 07:39:08 point_skyscan result=0 07:39:09 Check angles 07:39:09 SkyScan query 07:39:09 SkyScan query done: ret=0 az=89.82<-5988 ze=157.035<-1531 Statuses=0009 0009 07:39:09 Msec=0 True Az=89.82 Ze=157.035 Az status=0009 Ze status=0009 07:39:09 Check angles 07:39:09 SkyScan query 07:39:10 SkyScan query done: ret=0 az=72.315<-4821 ze=136.17<-2922 Statuses=0009 0009 07:39:10 Msec=750 True Az=72.315 Ze=136.17 Az status=0009 Ze status=0009 07:39:10 Check angles 07:39:10 SkyScan query 07:39:11 SkyScan query done: ret=0 az=54.69<-3646 ze=114.765<-4349 Statuses=0009 0009 07:39:11 Msec=1500 True Az=54.69 Ze=114.765 Az status=0009 Ze status=0009 07:39:11 Check angles 07:39:11 SkyScan query 07:39:11 SkyScan query done: ret=0 az=40.95<-2730 ze=93.84<-5744 Statuses=0009 0009 07:39:11 Msec=2250 True Az=40.95 Ze=93.84 Az status=0009 Ze status=0009 07:39:12 Check angles 07:39:12 SkyScan query 07:39:12 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 07:39:12 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 07:39:12 Check angles 07:39:12 SkyScan query 07:39:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 07:39:13 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 07:39:13 Check angles 07:39:13 SkyScan query 07:39:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:39:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:39:14 Message to Master queued w/err=0: serial=214294 error=0 07:39:19 Received message from Master: op=Filter serial=214295 07:39:19 Color wheel filter change from 0 to 0 07:39:19 FLIGetFilterPos err=0 currentPosition=0 07:39:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:19 Filter is already there-color wheel unchanged 07:39:19 Received message from Master: op=Shutter serial=214296 07:39:19 Shutter LASER close 07:39:19 Received message from Camera: op=State serial=214298 07:39:19 GetSingleValue result=40 Value=cccccccc 07:39:19 SkyScan query 07:39:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:39:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:20 Parameters OK 07:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:20 Set A/D data flow result=40 07:39:20 Set A/D channel type result=40 07:39:20 Set A/D encoding result=40 07:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:20 Set channel filter=0.000000e+000 result=40 07:39:20 Config A/D Result=40 07:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:20 Get A/D filter: -9.255963e+061 result=40 07:39:20 Get A/D value=-858993460 result=40 07:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:20 Parameters OK 07:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:20 Set A/D data flow result=40 07:39:20 Set A/D channel type result=40 07:39:20 Set A/D encoding result=40 07:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:20 Set channel filter=0.000000e+000 result=40 07:39:20 Config A/D Result=40 07:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:20 Get A/D filter: -9.255963e+061 result=40 07:39:20 Get A/D value=-858993460 result=40 07:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:20 Aux= 07:39:20 Message to Camera, serial 214298 queued 07:39:56 Received message from Master: op=PointingHead serial=214311 07:39:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:39:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:39:57 Point started: ret=0 07:39:57 point_skyscan result=0 07:39:57 Check angles 07:39:57 SkyScan query 07:39:58 SkyScan query done: ret=0 az=64.035<-4269 ze=66.51<-7566 Statuses=0009 0008 07:39:58 Msec=0 True Az=64.035 Ze=66.51 Az status=0009 Ze status=0008 07:39:58 Check angles 07:39:58 SkyScan query 07:39:59 SkyScan query done: ret=0 az=81.405<-5427 ze=66.51<-7566 Statuses=0009 0008 07:39:59 Msec=750 True Az=81.405 Ze=66.51 Az status=0009 Ze status=0008 07:39:59 Check angles 07:39:59 SkyScan query 07:40:00 SkyScan query done: ret=0 az=98.97<-6598 ze=66.495<-7567 Statuses=0009 0008 07:40:00 Msec=1500 True Az=98.97 Ze=66.495 Az status=0009 Ze status=0008 07:40:00 Check angles 07:40:00 SkyScan query 07:40:00 SkyScan query done: ret=0 az=116.43<-7762 ze=66.495<-7567 Statuses=0009 0008 07:40:00 Msec=2250 True Az=116.43 Ze=66.495 Az status=0009 Ze status=0008 07:40:00 Check angles 07:40:00 SkyScan query 07:40:01 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 07:40:01 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 07:40:01 Check angles 07:40:01 SkyScan query 07:40:02 SkyScan query done: ret=0 az=151.29<-10086 ze=66.495<-7567 Statuses=0009 0008 07:40:02 Msec=3750 True Az=151.29 Ze=66.495 Az status=0009 Ze status=0008 07:40:02 Check angles 07:40:02 SkyScan query 07:40:03 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:40:03 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:40:03 Message to Master queued w/err=0: serial=214311 error=0 07:40:08 Received message from Master: op=Filter serial=214312 07:40:08 Color wheel filter change from 0 to 0 07:40:08 FLIGetFilterPos err=0 currentPosition=0 07:40:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:08 Filter is already there-color wheel unchanged 07:40:08 Received message from Master: op=Shutter serial=214313 07:40:08 Shutter LASER close 07:40:08 Received message from Camera: op=State serial=214315 07:40:08 GetSingleValue result=40 Value=cccccccc 07:40:08 SkyScan query 07:40:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:40:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:08 Parameters OK 07:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:08 Set A/D data flow result=40 07:40:08 Set A/D channel type result=40 07:40:08 Set A/D encoding result=40 07:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:08 Set channel filter=0.000000e+000 result=40 07:40:08 Config A/D Result=40 07:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:08 Get A/D filter: -9.255963e+061 result=40 07:40:08 Get A/D value=-858993460 result=40 07:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:08 Parameters OK 07:40:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:08 Set A/D data flow result=40 07:40:08 Set A/D channel type result=40 07:40:08 Set A/D encoding result=40 07:40:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:08 Set channel filter=0.000000e+000 result=40 07:40:08 Config A/D Result=40 07:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:08 Get A/D filter: -9.255963e+061 result=40 07:40:08 Get A/D value=-858993460 result=40 07:40:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:08 Aux= 07:40:08 Message to Camera, serial 214315 queued 07:40:45 Received message from Master: op=PointingHead serial=214328 07:40:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:40:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:40:46 Point started: ret=0 07:40:46 point_skyscan result=0 07:40:46 Check angles 07:40:46 SkyScan query 07:40:47 SkyScan query done: ret=0 az=135.195<-9013 ze=96.12<-5592 Statuses=0009 0009 07:40:47 Msec=0 True Az=135.195 Ze=96.12 Az status=0009 Ze status=0009 07:40:47 Check angles 07:40:47 SkyScan query 07:40:48 SkyScan query done: ret=0 az=130.995<-8733 ze=117.09<-4194 Statuses=0008 0009 07:40:48 Msec=750 True Az=130.995 Ze=117.09 Az status=0008 Ze status=0009 07:40:48 Check angles 07:40:48 SkyScan query 07:40:48 SkyScan query done: ret=0 az=130.995<-8733 ze=138.42<-2772 Statuses=0008 0009 07:40:48 Msec=1500 True Az=130.995 Ze=138.42 Az status=0008 Ze status=0009 07:40:49 Check angles 07:40:49 SkyScan query 07:40:49 SkyScan query done: ret=0 az=130.995<-8733 ze=159.84<-1344 Statuses=0008 0009 07:40:49 Msec=2250 True Az=130.995 Ze=159.84 Az status=0008 Ze status=0009 07:40:49 Check angles 07:40:49 SkyScan query 07:40:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.205<-23947 Statuses=0008 0009 07:40:50 Msec=3000 True Az=130.995 Ze=-179.205 Az status=0008 Ze status=0009 07:40:50 Check angles 07:40:50 SkyScan query 07:40:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.815<-22521 Statuses=0008 0009 07:40:51 Msec=3750 True Az=130.995 Ze=-157.815 Az status=0008 Ze status=0009 07:40:51 Check angles 07:40:51 SkyScan query 07:40:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 07:40:51 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 07:40:52 Check angles 07:40:52 SkyScan query 07:40:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:40:52 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:40:52 Message to Master queued w/err=0: serial=214328 error=0 07:40:57 Received message from Master: op=Filter serial=214329 07:40:57 Color wheel filter change from 0 to 0 07:40:57 FLIGetFilterPos err=0 currentPosition=0 07:40:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:57 Filter is already there-color wheel unchanged 07:40:57 Received message from Master: op=Shutter serial=214330 07:40:57 Shutter LASER close 07:40:57 Received message from Camera: op=State serial=214332 07:40:57 GetSingleValue result=40 Value=cccccccc 07:40:57 SkyScan query 07:40:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:40:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:58 Parameters OK 07:40:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:58 Set A/D data flow result=40 07:40:58 Set A/D channel type result=40 07:40:58 Set A/D encoding result=40 07:40:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:58 Set channel filter=0.000000e+000 result=40 07:40:58 Config A/D Result=40 07:40:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:58 Get A/D filter: -9.255963e+061 result=40 07:40:58 Get A/D value=-858993460 result=40 07:40:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:58 Parameters OK 07:40:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:58 Set A/D data flow result=40 07:40:58 Set A/D channel type result=40 07:40:58 Set A/D encoding result=40 07:40:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:58 Set channel filter=0.000000e+000 result=40 07:40:58 Config A/D Result=40 07:40:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:58 Get A/D filter: -9.255963e+061 result=40 07:40:58 Get A/D value=-858993460 result=40 07:40:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:58 Aux= 07:40:58 Message to Camera, serial 214332 queued 07:41:34 Received message from Master: op=PointingHead serial=214344 07:41:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:41:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:41:34 Point started: ret=0 07:41:34 point_skyscan result=0 07:41:35 Check angles 07:41:35 SkyScan query 07:41:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0009 0009 07:41:36 Msec=0 True Az=112.995 Ze=-171.12 Az status=0009 Ze status=0009 07:41:36 Check angles 07:41:36 SkyScan query 07:41:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:41:36 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:41:36 Message to Master queued w/err=0: serial=214344 error=0 07:41:41 Received message from Master: op=Filter serial=214345 07:41:41 Color wheel filter change from 0 to 0 07:41:41 FLIGetFilterPos err=0 currentPosition=0 07:41:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:41 Filter is already there-color wheel unchanged 07:41:42 Received message from Master: op=Shutter serial=214346 07:41:42 Shutter LASER open 07:41:42 Received message from Camera: op=State serial=214348 07:41:42 GetSingleValue result=40 Value=cccccccc 07:41:42 SkyScan query 07:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:41:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:42 Parameters OK 07:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:42 Set A/D data flow result=40 07:41:42 Set A/D channel type result=40 07:41:42 Set A/D encoding result=40 07:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:42 Set channel filter=0.000000e+000 result=40 07:41:42 Config A/D Result=40 07:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:42 Get A/D filter: -9.255963e+061 result=40 07:41:42 Get A/D value=-858993460 result=40 07:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:42 Parameters OK 07:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:42 Set A/D data flow result=40 07:41:42 Set A/D channel type result=40 07:41:42 Set A/D encoding result=40 07:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:42 Set channel filter=0.000000e+000 result=40 07:41:42 Config A/D Result=40 07:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:42 Get A/D filter: -9.255963e+061 result=40 07:41:42 Get A/D value=-858993460 result=40 07:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:42 Aux= 07:41:42 Message to Camera, serial 214348 queued 07:41:51 Received message from Master: op=Shutter serial=214358 07:41:51 Shutter LASER close 07:41:51 Received message from Master: op=PointingHead serial=214362 07:41:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:41:51 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:41:52 Point started: ret=0 07:41:52 point_skyscan result=0 07:41:52 Check angles 07:41:52 SkyScan query 07:41:53 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.07<-21538 Statuses=0009 0009 07:41:53 Msec=0 True Az=136.155 Ze=-143.07 Az status=0009 Ze status=0009 07:41:53 Check angles 07:41:53 SkyScan query 07:41:54 SkyScan query done: ret=0 az=153.705<-10247 ze=-122.1<-20140 Statuses=0009 0009 07:41:54 Msec=750 True Az=153.705 Ze=-122.1 Az status=0009 Ze status=0009 07:41:54 Check angles 07:41:54 SkyScan query 07:41:54 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.235<-18749 Statuses=0009 0009 07:41:54 Msec=1500 True Az=171.195 Ze=-101.235 Az status=0009 Ze status=0009 07:41:55 Check angles 07:41:55 SkyScan query 07:41:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.77<-17318 Statuses=0008 0009 07:41:55 Msec=2250 True Az=176.01 Ze=-79.77 Az status=0008 Ze status=0009 07:41:55 Check angles 07:41:55 SkyScan query 07:41:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.305<-15887 Statuses=0008 0009 07:41:56 Msec=3000 True Az=176.01 Ze=-58.305 Az status=0008 Ze status=0009 07:41:56 Check angles 07:41:56 SkyScan query 07:41:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 07:41:57 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 07:41:57 Message to Master queued w/err=0: serial=214362 error=0 07:42:02 Received message from Master: op=Filter serial=214363 07:42:02 Color wheel filter change from 0 to 0 07:42:02 FLIGetFilterPos err=0 currentPosition=0 07:42:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:02 Filter is already there-color wheel unchanged 07:42:02 Received message from Master: op=Shutter serial=214364 07:42:02 Shutter LASER close 07:42:02 Received message from Camera: op=State serial=214366 07:42:02 GetSingleValue result=40 Value=cccccccc 07:42:02 SkyScan query 07:42:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:42:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:03 Parameters OK 07:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:03 Set A/D data flow result=40 07:42:03 Set A/D channel type result=40 07:42:03 Set A/D encoding result=40 07:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:03 Set channel filter=0.000000e+000 result=40 07:42:03 Config A/D Result=40 07:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:03 Get A/D filter: -9.255963e+061 result=40 07:42:03 Get A/D value=-858993460 result=40 07:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:03 Parameters OK 07:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:03 Set A/D data flow result=40 07:42:03 Set A/D channel type result=40 07:42:03 Set A/D encoding result=40 07:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:03 Set channel filter=0.000000e+000 result=40 07:42:03 Config A/D Result=40 07:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:03 Get A/D filter: -9.255963e+061 result=40 07:42:03 Get A/D value=-858993460 result=40 07:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:03 Aux= 07:42:03 Message to Camera, serial 214366 queued 07:42:39 Received message from Master: op=PointingHead serial=214379 07:42:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:42:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:42:40 Point started: ret=0 07:42:40 point_skyscan result=0 07:42:41 Check angles 07:42:41 SkyScan query 07:42:41 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.945<-13463 Statuses=0009 0009 07:42:41 Msec=0 True Az=153.165 Ze=-21.945 Az status=0009 Ze status=0009 07:42:41 Check angles 07:42:41 SkyScan query 07:42:42 SkyScan query done: ret=0 az=135.765<-9051 ze=-0.915<-12061 Statuses=0009 0009 07:42:42 Msec=750 True Az=135.765 Ze=-0.915 Az status=0009 Ze status=0009 07:42:42 Check angles 07:42:42 SkyScan query 07:42:43 SkyScan query done: ret=0 az=118.17<-7878 ze=19.98<-10668 Statuses=0009 0009 07:42:43 Msec=1500 True Az=118.17 Ze=19.98 Az status=0009 Ze status=0009 07:42:43 Check angles 07:42:43 SkyScan query 07:42:43 SkyScan query done: ret=0 az=100.755<-6717 ze=40.995<-9267 Statuses=0009 0009 07:42:43 Msec=2250 True Az=100.755 Ze=40.995 Az status=0009 Ze status=0009 07:42:44 Check angles 07:42:44 SkyScan query 07:42:44 SkyScan query done: ret=0 az=85.965<-5731 ze=51.585<-8561 Statuses=0009 0008 07:42:44 Msec=3000 True Az=85.965 Ze=51.585 Az status=0009 Ze status=0008 07:42:44 Check angles 07:42:44 SkyScan query 07:42:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:42:45 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:42:45 Message to Master queued w/err=0: serial=214379 error=0 07:42:50 Received message from Master: op=Filter serial=214380 07:42:50 Color wheel filter change from 0 to 0 07:42:50 FLIGetFilterPos err=0 currentPosition=0 07:42:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:50 Filter is already there-color wheel unchanged 07:42:50 Received message from Master: op=Shutter serial=214381 07:42:50 Shutter LASER close 07:42:50 Received message from Camera: op=State serial=214383 07:42:50 GetSingleValue result=40 Value=cccccccc 07:42:50 SkyScan query 07:42:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 07:42:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:51 Parameters OK 07:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:51 Set A/D data flow result=40 07:42:51 Set A/D channel type result=40 07:42:51 Set A/D encoding result=40 07:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:51 Set channel filter=0.000000e+000 result=40 07:42:51 Config A/D Result=40 07:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:51 Get A/D filter: -9.255963e+061 result=40 07:42:51 Get A/D value=-858993460 result=40 07:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:51 Parameters OK 07:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:51 Set A/D data flow result=40 07:42:51 Set A/D channel type result=40 07:42:51 Set A/D encoding result=40 07:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:51 Set channel filter=0.000000e+000 result=40 07:42:51 Config A/D Result=40 07:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:51 Get A/D filter: -9.255963e+061 result=40 07:42:51 Get A/D value=-858993460 result=40 07:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:51 Aux= 07:42:51 Message to Camera, serial 214383 queued 07:43:27 Received message from Master: op=PointingHead serial=214395 07:43:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:43:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:43:27 Point started: ret=0 07:43:27 point_skyscan result=0 07:43:28 Check angles 07:43:28 SkyScan query 07:43:28 SkyScan query done: ret=0 az=108.78<-7252 ze=38.475<-9435 Statuses=0009 0008 07:43:28 Msec=0 True Az=108.78 Ze=38.475 Az status=0009 Ze status=0008 07:43:28 Check angles 07:43:28 SkyScan query 07:43:29 SkyScan query done: ret=0 az=126.3<-8420 ze=38.505<-9433 Statuses=0009 0008 07:43:29 Msec=750 True Az=126.3 Ze=38.505 Az status=0009 Ze status=0008 07:43:29 Check angles 07:43:29 SkyScan query 07:43:30 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 07:43:30 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 07:43:30 Check angles 07:43:30 SkyScan query 07:43:30 SkyScan query done: ret=0 az=161.46<-10764 ze=38.505<-9433 Statuses=0009 0008 07:43:30 Msec=2250 True Az=161.46 Ze=38.505 Az status=0009 Ze status=0008 07:43:31 Check angles 07:43:31 SkyScan query 07:43:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:43:31 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:43:31 Check angles 07:43:31 SkyScan query 07:43:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:43:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:43:32 Message to Master queued w/err=0: serial=214395 error=0 07:43:37 Received message from Master: op=Filter serial=214396 07:43:37 Color wheel filter change from 0 to 0 07:43:37 FLIGetFilterPos err=0 currentPosition=0 07:43:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:37 Filter is already there-color wheel unchanged 07:43:37 Received message from Master: op=Shutter serial=214397 07:43:37 Shutter LASER close 07:43:37 Received message from Camera: op=State serial=214399 07:43:37 GetSingleValue result=40 Value=cccccccc 07:43:37 SkyScan query 07:43:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:43:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:38 Parameters OK 07:43:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:38 Set A/D data flow result=40 07:43:38 Set A/D channel type result=40 07:43:38 Set A/D encoding result=40 07:43:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:38 Set channel filter=0.000000e+000 result=40 07:43:38 Config A/D Result=40 07:43:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:38 Get A/D filter: -9.255963e+061 result=40 07:43:38 Get A/D value=-858993460 result=40 07:43:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:38 Parameters OK 07:43:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:38 Set A/D data flow result=40 07:43:38 Set A/D channel type result=40 07:43:38 Set A/D encoding result=40 07:43:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:38 Set channel filter=0.000000e+000 result=40 07:43:38 Config A/D Result=40 07:43:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:38 Get A/D filter: -9.255963e+061 result=40 07:43:38 Get A/D value=-858993460 result=40 07:43:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:38 Aux= 07:43:38 Message to Camera, serial 214399 queued 07:44:15 Received message from Master: op=PointingHead serial=214412 07:44:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:44:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:44:15 Point started: ret=0 07:44:15 point_skyscan result=0 07:44:16 Check angles 07:44:16 SkyScan query 07:44:16 SkyScan query done: ret=0 az=152.955<-10197 ze=8.82<-11412 Statuses=0009 0009 07:44:16 Msec=0 True Az=152.955 Ze=8.82 Az status=0009 Ze status=0009 07:44:17 Check angles 07:44:17 SkyScan query 07:44:17 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.6<-12840 Statuses=0009 0009 07:44:17 Msec=750 True Az=135.12 Ze=-12.6 Az status=0009 Ze status=0009 07:44:17 Check angles 07:44:17 SkyScan query 07:44:18 SkyScan query done: ret=0 az=117.135<-7809 ze=-33.99<-14266 Statuses=0009 0009 07:44:18 Msec=1500 True Az=117.135 Ze=-33.99 Az status=0009 Ze status=0009 07:44:18 Check angles 07:44:18 SkyScan query 07:44:19 SkyScan query done: ret=0 az=99.84<-6656 ze=-51.57<-15438 Statuses=0009 0009 07:44:19 Msec=2250 True Az=99.84 Ze=-51.57 Az status=0009 Ze status=0009 07:44:19 Check angles 07:44:19 SkyScan query 07:44:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 07:44:19 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 07:44:20 Check angles 07:44:20 SkyScan query 07:44:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:44:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:44:20 Message to Master queued w/err=0: serial=214412 error=0 07:44:25 Received message from Master: op=Filter serial=214413 07:44:25 Color wheel filter change from 0 to 0 07:44:25 FLIGetFilterPos err=0 currentPosition=0 07:44:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:25 Filter is already there-color wheel unchanged 07:44:25 Received message from Master: op=Shutter serial=214414 07:44:25 Shutter LASER close 07:44:25 Received message from Camera: op=State serial=214416 07:44:25 GetSingleValue result=40 Value=cccccccc 07:44:25 SkyScan query 07:44:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:44:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:26 Parameters OK 07:44:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:26 Set A/D data flow result=40 07:44:26 Set A/D channel type result=40 07:44:26 Set A/D encoding result=40 07:44:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:26 Set channel filter=0.000000e+000 result=40 07:44:26 Config A/D Result=40 07:44:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:26 Get A/D filter: -9.255963e+061 result=40 07:44:26 Get A/D value=-858993460 result=40 07:44:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:26 Parameters OK 07:44:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:26 Set A/D data flow result=40 07:44:26 Set A/D channel type result=40 07:44:26 Set A/D encoding result=40 07:44:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:26 Set channel filter=0.000000e+000 result=40 07:44:26 Config A/D Result=40 07:44:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:26 Get A/D filter: -9.255963e+061 result=40 07:44:26 Get A/D value=-858993460 result=40 07:44:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:26 Aux= 07:44:26 Message to Camera, serial 214416 queued 07:45:03 Received message from Master: op=PointingHead serial=214429 07:45:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:45:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:45:03 Point started: ret=0 07:45:03 point_skyscan result=0 07:45:04 Check angles 07:45:04 SkyScan query 07:45:04 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.225<-17415 Statuses=0009 0009 07:45:04 Msec=0 True Az=108.915 Ze=-81.225 Az status=0009 Ze status=0009 07:45:05 Check angles 07:45:05 SkyScan query 07:45:05 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.615<-18841 Statuses=0008 0009 07:45:05 Msec=750 True Az=112.98 Ze=-102.615 Az status=0008 Ze status=0009 07:45:05 Check angles 07:45:05 SkyScan query 07:45:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.005<-20267 Statuses=0008 0009 07:45:06 Msec=1500 True Az=112.995 Ze=-124.005 Az status=0008 Ze status=0009 07:45:06 Check angles 07:45:06 SkyScan query 07:45:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 07:45:07 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 07:45:07 Check angles 07:45:07 SkyScan query 07:45:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.335<-23089 Statuses=0008 0009 07:45:07 Msec=3000 True Az=112.995 Ze=-166.335 Az status=0008 Ze status=0009 07:45:08 Check angles 07:45:08 SkyScan query 07:45:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:45:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:45:08 Message to Master queued w/err=0: serial=214429 error=0 07:45:13 Received message from Master: op=Filter serial=214430 07:45:13 Color wheel filter change from 0 to 0 07:45:13 FLIGetFilterPos err=0 currentPosition=0 07:45:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:13 Filter is already there-color wheel unchanged 07:45:13 Received message from Master: op=Shutter serial=214431 07:45:13 Shutter LASER open 07:45:14 Received message from Camera: op=State serial=214433 07:45:14 GetSingleValue result=40 Value=cccccccc 07:45:14 SkyScan query 07:45:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:45:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:14 Parameters OK 07:45:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:14 Set A/D data flow result=40 07:45:14 Set A/D channel type result=40 07:45:14 Set A/D encoding result=40 07:45:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:14 Set channel filter=0.000000e+000 result=40 07:45:14 Config A/D Result=40 07:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:14 Get A/D filter: -9.255963e+061 result=40 07:45:14 Get A/D value=-858993460 result=40 07:45:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:14 Parameters OK 07:45:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:14 Set A/D data flow result=40 07:45:14 Set A/D channel type result=40 07:45:14 Set A/D encoding result=40 07:45:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:14 Set channel filter=0.000000e+000 result=40 07:45:14 Config A/D Result=40 07:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:14 Get A/D filter: -9.255963e+061 result=40 07:45:14 Get A/D value=-858993460 result=40 07:45:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:14 Aux= 07:45:14 Message to Camera, serial 214433 queued 07:45:23 Received message from Master: op=Shutter serial=214443 07:45:23 Shutter LASER close 07:45:23 Received message from Master: op=PointingHead serial=214447 07:45:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:45:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:45:23 Point started: ret=0 07:45:23 point_skyscan result=0 07:45:24 Check angles 07:45:24 SkyScan query 07:45:25 SkyScan query done: ret=0 az=90.045<-6003 ze=157.365<-1509 Statuses=0009 0009 07:45:25 Msec=0 True Az=90.045 Ze=157.365 Az status=0009 Ze status=0009 07:45:25 Check angles 07:45:25 SkyScan query 07:45:26 SkyScan query done: ret=0 az=72.6<-4840 ze=136.41<-2906 Statuses=0009 0009 07:45:26 Msec=750 True Az=72.6 Ze=136.41 Az status=0009 Ze status=0009 07:45:26 Check angles 07:45:26 SkyScan query 07:45:26 SkyScan query done: ret=0 az=55.2<-3680 ze=115.485<-4301 Statuses=0009 0009 07:45:26 Msec=1500 True Az=55.2 Ze=115.485 Az status=0009 Ze status=0009 07:45:27 Check angles 07:45:27 SkyScan query 07:45:27 SkyScan query done: ret=0 az=40.965<-2731 ze=94.005<-5733 Statuses=0009 0009 07:45:27 Msec=2250 True Az=40.965 Ze=94.005 Az status=0009 Ze status=0009 07:45:27 Received message from Master: op=Identify serial=214448 07:45:27 Check angles 07:45:27 SkyScan query 07:45:28 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 07:45:28 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 07:45:28 Check angles 07:45:28 SkyScan query 07:45:29 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 07:45:29 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 07:45:29 Check angles 07:45:29 SkyScan query 07:45:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:45:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:45:29 Message to Master queued w/err=0: serial=214447 error=0 07:45:34 Received message from Master: op=Filter serial=214451 07:45:34 Color wheel filter change from 0 to 0 07:45:34 FLIGetFilterPos err=0 currentPosition=0 07:45:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:34 Filter is already there-color wheel unchanged 07:45:35 Received message from Master: op=Shutter serial=214452 07:45:35 Shutter LASER close 07:45:35 Received message from Camera: op=State serial=214454 07:45:35 GetSingleValue result=40 Value=cccccccc 07:45:35 SkyScan query 07:45:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:45:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:35 Parameters OK 07:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:35 Set A/D data flow result=40 07:45:35 Set A/D channel type result=40 07:45:35 Set A/D encoding result=40 07:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:35 Set channel filter=0.000000e+000 result=40 07:45:35 Config A/D Result=40 07:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:35 Get A/D filter: -9.255963e+061 result=40 07:45:35 Get A/D value=-858993460 result=40 07:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:35 Parameters OK 07:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:35 Set A/D data flow result=40 07:45:35 Set A/D channel type result=40 07:45:35 Set A/D encoding result=40 07:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:35 Set channel filter=0.000000e+000 result=40 07:45:35 Config A/D Result=40 07:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:35 Get A/D filter: -9.255963e+061 result=40 [UTC 2018-12-17 07:45:35] 07:45:35 Get A/D value=-858993460 result=40 07:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:35 Aux= 07:45:35 Message to Camera, serial 214454 queued 07:46:12 Received message from Master: op=PointingHead serial=214467 07:46:12 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:46:12 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:46:12 Point started: ret=0 07:46:12 point_skyscan result=0 07:46:13 Check angles 07:46:13 SkyScan query 07:46:14 SkyScan query done: ret=0 az=63.84<-4256 ze=66.51<-7566 Statuses=0009 0008 07:46:14 Msec=0 True Az=63.84 Ze=66.51 Az status=0009 Ze status=0008 07:46:14 Check angles 07:46:14 SkyScan query 07:46:15 SkyScan query done: ret=0 az=81.345<-5423 ze=66.51<-7566 Statuses=0009 0008 07:46:15 Msec=750 True Az=81.345 Ze=66.51 Az status=0009 Ze status=0008 07:46:15 Check angles 07:46:15 SkyScan query 07:46:15 SkyScan query done: ret=0 az=98.835<-6589 ze=66.495<-7567 Statuses=0009 0008 07:46:15 Msec=1500 True Az=98.835 Ze=66.495 Az status=0009 Ze status=0008 07:46:15 Check angles 07:46:15 SkyScan query 07:46:16 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 07:46:16 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 07:46:16 Check angles 07:46:16 SkyScan query 07:46:17 SkyScan query done: ret=0 az=134.115<-8941 ze=66.495<-7567 Statuses=0009 0008 07:46:17 Msec=3000 True Az=134.115 Ze=66.495 Az status=0009 Ze status=0008 07:46:17 Check angles 07:46:17 SkyScan query 07:46:18 SkyScan query done: ret=0 az=151.47<-10098 ze=66.495<-7567 Statuses=0009 0008 07:46:18 Msec=3750 True Az=151.47 Ze=66.495 Az status=0009 Ze status=0008 07:46:18 Check angles 07:46:18 SkyScan query 07:46:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:46:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:46:18 Message to Master queued w/err=0: serial=214467 error=0 07:46:23 Received message from Master: op=Filter serial=214468 07:46:23 Color wheel filter change from 0 to 0 07:46:23 FLIGetFilterPos err=0 currentPosition=0 07:46:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:23 Filter is already there-color wheel unchanged 07:46:23 Received message from Master: op=Shutter serial=214469 07:46:23 Shutter LASER close 07:46:24 Received message from Camera: op=State serial=214471 07:46:24 GetSingleValue result=40 Value=cccccccc 07:46:24 SkyScan query 07:46:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:46:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:24 Parameters OK 07:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:24 Set A/D data flow result=40 07:46:24 Set A/D channel type result=40 07:46:24 Set A/D encoding result=40 07:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:24 Set channel filter=0.000000e+000 result=40 07:46:24 Config A/D Result=40 07:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:24 Get A/D filter: -9.255963e+061 result=40 07:46:24 Get A/D value=-858993460 result=40 07:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:24 Parameters OK 07:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:24 Set A/D data flow result=40 07:46:24 Set A/D channel type result=40 07:46:24 Set A/D encoding result=40 07:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:24 Set channel filter=0.000000e+000 result=40 07:46:24 Config A/D Result=40 07:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:24 Get A/D filter: -9.255963e+061 result=40 07:46:24 Get A/D value=-858993460 result=40 07:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:24 Aux= 07:46:24 Message to Camera, serial 214471 queued 07:47:01 Received message from Master: op=PointingHead serial=214484 07:47:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:47:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:47:01 Point started: ret=0 07:47:01 point_skyscan result=0 07:47:02 Check angles 07:47:02 SkyScan query 07:47:03 SkyScan query done: ret=0 az=135.12<-9008 ze=96.165<-5589 Statuses=0009 0009 07:47:03 Msec=0 True Az=135.12 Ze=96.165 Az status=0009 Ze status=0009 07:47:03 Check angles 07:47:03 SkyScan query 07:47:03 SkyScan query done: ret=0 az=130.995<-8733 ze=117.12<-4192 Statuses=0008 0009 07:47:03 Msec=750 True Az=130.995 Ze=117.12 Az status=0008 Ze status=0009 07:47:04 Check angles 07:47:04 SkyScan query 07:47:04 SkyScan query done: ret=0 az=130.995<-8733 ze=138.015<-2799 Statuses=0008 0009 07:47:04 Msec=1500 True Az=130.995 Ze=138.015 Az status=0008 Ze status=0009 07:47:04 Check angles 07:47:04 SkyScan query 07:47:05 SkyScan query done: ret=0 az=130.995<-8733 ze=159<-1400 Statuses=0008 0009 07:47:05 Msec=2250 True Az=130.995 Ze=159 Az status=0008 Ze status=0009 07:47:05 Check angles 07:47:05 SkyScan query 07:47:06 SkyScan query done: ret=0 az=130.995<-8733 ze=179.91<-6 Statuses=0008 0009 07:47:06 Msec=3000 True Az=130.995 Ze=179.91 Az status=0008 Ze status=0009 07:47:06 Check angles 07:47:06 SkyScan query 07:47:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-159.09<-22606 Statuses=0008 0009 07:47:06 Msec=3750 True Az=130.995 Ze=-159.09 Az status=0008 Ze status=0009 07:47:07 Check angles 07:47:07 SkyScan query 07:47:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 07:47:07 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 07:47:07 Check angles 07:47:07 SkyScan query 07:47:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:47:08 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:47:08 Message to Master queued w/err=0: serial=214484 error=0 07:47:13 Received message from Master: op=Filter serial=214485 07:47:13 Color wheel filter change from 0 to 0 07:47:13 FLIGetFilterPos err=0 currentPosition=0 07:47:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:13 Filter is already there-color wheel unchanged 07:47:13 Received message from Master: op=Shutter serial=214486 07:47:13 Shutter LASER close 07:47:13 Received message from Camera: op=State serial=214488 07:47:13 GetSingleValue result=40 Value=cccccccc 07:47:13 SkyScan query 07:47:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:47:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:14 Parameters OK 07:47:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:14 Set A/D data flow result=40 07:47:14 Set A/D channel type result=40 07:47:14 Set A/D encoding result=40 07:47:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:14 Set channel filter=0.000000e+000 result=40 07:47:14 Config A/D Result=40 07:47:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:14 Get A/D filter: -9.255963e+061 result=40 07:47:14 Get A/D value=-858993460 result=40 07:47:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:14 Parameters OK 07:47:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:14 Set A/D data flow result=40 07:47:14 Set A/D channel type result=40 07:47:14 Set A/D encoding result=40 07:47:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:14 Set channel filter=0.000000e+000 result=40 07:47:14 Config A/D Result=40 07:47:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:14 Get A/D filter: -9.255963e+061 result=40 07:47:14 Get A/D value=-858993460 result=40 07:47:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:14 Aux= 07:47:14 Message to Camera, serial 214488 queued 07:47:51 Received message from Master: op=PointingHead serial=214501 07:47:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:47:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:47:51 Point started: ret=0 07:47:51 point_skyscan result=0 07:47:52 Check angles 07:47:52 SkyScan query 07:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 07:47:52 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 07:47:52 Check angles 07:47:52 SkyScan query 07:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:47:53 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:47:53 Message to Master queued w/err=0: serial=214501 error=0 07:47:58 Received message from Master: op=Filter serial=214502 07:47:58 Color wheel filter change from 0 to 0 07:47:58 FLIGetFilterPos err=0 currentPosition=0 07:47:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:58 Filter is already there-color wheel unchanged 07:47:58 Received message from Master: op=Shutter serial=214503 07:47:58 Shutter LASER open 07:47:58 Received message from Camera: op=State serial=214505 07:47:58 GetSingleValue result=40 Value=cccccccc 07:47:58 SkyScan query 07:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:47:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:59 Parameters OK 07:47:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:59 Set A/D data flow result=40 07:47:59 Set A/D channel type result=40 07:47:59 Set A/D encoding result=40 07:47:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:59 Set channel filter=0.000000e+000 result=40 07:47:59 Config A/D Result=40 07:47:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:59 Get A/D filter: -9.255963e+061 result=40 07:47:59 Get A/D value=-858993460 result=40 07:47:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:59 Parameters OK 07:47:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:59 Set A/D data flow result=40 07:47:59 Set A/D channel type result=40 07:47:59 Set A/D encoding result=40 07:47:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:59 Set channel filter=0.000000e+000 result=40 07:47:59 Config A/D Result=40 07:47:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:59 Get A/D filter: -9.255963e+061 result=40 07:47:59 Get A/D value=-858993460 result=40 07:47:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:59 Aux= 07:47:59 Message to Camera, serial 214505 queued 07:48:07 Received message from Master: op=Shutter serial=214515 07:48:07 Shutter LASER close 07:48:08 Received message from Master: op=PointingHead serial=214519 07:48:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:48:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:48:08 Point started: ret=0 07:48:08 point_skyscan result=0 07:48:09 Check angles 07:48:09 SkyScan query 07:48:10 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.98<-21532 Statuses=0009 0009 07:48:10 Msec=0 True Az=136.215 Ze=-142.98 Az status=0009 Ze status=0009 07:48:10 Check angles 07:48:10 SkyScan query 07:48:10 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.995<-20133 Statuses=0009 0009 07:48:10 Msec=750 True Az=153.72 Ze=-121.995 Az status=0009 Ze status=0009 07:48:11 Check angles 07:48:11 SkyScan query 07:48:11 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.545<-18703 Statuses=0009 0009 07:48:11 Msec=1500 True Az=171.555 Ze=-100.545 Az status=0009 Ze status=0009 07:48:11 Check angles 07:48:11 SkyScan query 07:48:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 07:48:12 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 07:48:12 Check angles 07:48:12 SkyScan query 07:48:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 07:48:13 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 07:48:13 Check angles 07:48:13 SkyScan query 07:48:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 07:48:13 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 07:48:13 Message to Master queued w/err=0: serial=214519 error=0 07:48:18 Received message from Master: op=Filter serial=214520 07:48:18 Color wheel filter change from 0 to 0 07:48:18 FLIGetFilterPos err=0 currentPosition=0 07:48:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:18 Filter is already there-color wheel unchanged 07:48:19 Received message from Master: op=Shutter serial=214521 07:48:19 Shutter LASER close 07:48:19 Received message from Camera: op=State serial=214523 07:48:19 GetSingleValue result=40 Value=cccccccc 07:48:19 SkyScan query 07:48:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:48:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:19 Parameters OK 07:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:19 Set A/D data flow result=40 07:48:19 Set A/D channel type result=40 07:48:19 Set A/D encoding result=40 07:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:19 Set channel filter=0.000000e+000 result=40 07:48:19 Config A/D Result=40 07:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:19 Get A/D filter: -9.255963e+061 result=40 07:48:19 Get A/D value=-858993460 result=40 07:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:19 Parameters OK 07:48:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:19 Set A/D data flow result=40 07:48:19 Set A/D channel type result=40 07:48:19 Set A/D encoding result=40 07:48:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:19 Set channel filter=0.000000e+000 result=40 07:48:19 Config A/D Result=40 07:48:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:19 Get A/D filter: -9.255963e+061 result=40 07:48:19 Get A/D value=-858993460 result=40 07:48:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:19 Aux= 07:48:19 Message to Camera, serial 214523 queued 07:48:56 Received message from Master: op=PointingHead serial=214536 07:48:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:48:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:48:57 Point started: ret=0 07:48:57 point_skyscan result=0 07:48:57 Check angles 07:48:57 SkyScan query 07:48:58 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.02<-13468 Statuses=0009 0009 07:48:58 Msec=0 True Az=153.225 Ze=-22.02 Az status=0009 Ze status=0009 07:48:58 Check angles 07:48:58 SkyScan query 07:48:59 SkyScan query done: ret=0 az=135.81<-9054 ze=-1.02<-12068 Statuses=0009 0009 07:48:59 Msec=750 True Az=135.81 Ze=-1.02 Az status=0009 Ze status=0009 07:48:59 Check angles 07:48:59 SkyScan query 07:48:59 SkyScan query done: ret=0 az=118.245<-7883 ze=19.89<-10674 Statuses=0009 0009 07:48:59 Msec=1500 True Az=118.245 Ze=19.89 Az status=0009 Ze status=0009 07:49:00 Check angles 07:49:00 SkyScan query 07:49:00 SkyScan query done: ret=0 az=100.875<-6725 ze=40.905<-9273 Statuses=0009 0009 07:49:00 Msec=2250 True Az=100.875 Ze=40.905 Az status=0009 Ze status=0009 07:49:00 Check angles 07:49:00 SkyScan query 07:49:01 SkyScan query done: ret=0 az=85.965<-5731 ze=51.6<-8560 Statuses=0009 0008 07:49:01 Msec=3000 True Az=85.965 Ze=51.6 Az status=0009 Ze status=0008 07:49:01 Check angles 07:49:01 SkyScan query 07:49:02 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 07:49:02 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 07:49:02 Message to Master queued w/err=0: serial=214536 error=0 07:49:07 Received message from Master: op=Filter serial=214537 07:49:07 Color wheel filter change from 0 to 0 07:49:07 FLIGetFilterPos err=0 currentPosition=0 07:49:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:07 Filter is already there-color wheel unchanged 07:49:07 Received message from Master: op=Shutter serial=214538 07:49:07 Shutter LASER close 07:49:07 Received message from Camera: op=State serial=214540 07:49:07 GetSingleValue result=40 Value=cccccccc 07:49:07 SkyScan query 07:49:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:49:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:07 Parameters OK 07:49:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:07 Set A/D data flow result=40 07:49:07 Set A/D channel type result=40 07:49:07 Set A/D encoding result=40 07:49:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:07 Set channel filter=0.000000e+000 result=40 07:49:07 Config A/D Result=40 07:49:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:07 Get A/D filter: -9.255963e+061 result=40 07:49:07 Get A/D value=-858993460 result=40 07:49:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:07 Parameters OK 07:49:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:07 Set A/D data flow result=40 07:49:07 Set A/D channel type result=40 07:49:07 Set A/D encoding result=40 07:49:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:07 Set channel filter=0.000000e+000 result=40 07:49:07 Config A/D Result=40 07:49:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:07 Get A/D filter: -9.255963e+061 result=40 07:49:07 Get A/D value=-858993460 result=40 07:49:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:07 Aux= 07:49:07 Message to Camera, serial 214540 queued 07:49:44 Received message from Master: op=PointingHead serial=214553 07:49:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:49:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:49:45 Point started: ret=0 07:49:45 point_skyscan result=0 07:49:45 Check angles 07:49:45 SkyScan query 07:49:46 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 07:49:46 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 07:49:46 Check angles 07:49:46 SkyScan query 07:49:47 SkyScan query done: ret=0 az=126.48<-8432 ze=38.505<-9433 Statuses=0009 0008 07:49:47 Msec=750 True Az=126.48 Ze=38.505 Az status=0009 Ze status=0008 07:49:47 Check angles 07:49:47 SkyScan query 07:49:47 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 07:49:47 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 07:49:48 Check angles 07:49:48 SkyScan query 07:49:48 SkyScan query done: ret=0 az=161.64<-10776 ze=38.505<-9433 Statuses=0009 0008 07:49:48 Msec=2250 True Az=161.64 Ze=38.505 Az status=0009 Ze status=0008 07:49:48 Check angles 07:49:48 SkyScan query 07:49:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:49:49 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:49:49 Check angles 07:49:49 SkyScan query 07:49:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:49:50 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:49:50 Message to Master queued w/err=0: serial=214553 error=0 07:49:55 Received message from Master: op=Filter serial=214554 07:49:55 Color wheel filter change from 0 to 0 07:49:55 FLIGetFilterPos err=0 currentPosition=0 07:49:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:55 Filter is already there-color wheel unchanged 07:49:55 Received message from Master: op=Shutter serial=214555 07:49:55 Shutter LASER close 07:49:55 Received message from Camera: op=State serial=214557 07:49:55 GetSingleValue result=40 Value=cccccccc 07:49:55 SkyScan query 07:49:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:49:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:56 Parameters OK 07:49:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:56 Set A/D data flow result=40 07:49:56 Set A/D channel type result=40 07:49:56 Set A/D encoding result=40 07:49:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:56 Set channel filter=0.000000e+000 result=40 07:49:56 Config A/D Result=40 07:49:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:56 Get A/D filter: -9.255963e+061 result=40 07:49:56 Get A/D value=-858993460 result=40 07:49:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:56 Parameters OK 07:49:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:56 Set A/D data flow result=40 07:49:56 Set A/D channel type result=40 07:49:56 Set A/D encoding result=40 07:49:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:56 Set channel filter=0.000000e+000 result=40 07:49:56 Config A/D Result=40 07:49:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:56 Get A/D filter: -9.255963e+061 result=40 07:49:56 Get A/D value=-858993460 result=40 07:49:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:56 Aux= 07:49:56 Message to Camera, serial 214557 queued 07:50:31 Received message from Master: op=PointingHead serial=214569 07:50:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:50:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:50:32 Point started: ret=0 07:50:32 point_skyscan result=0 07:50:33 Check angles 07:50:33 SkyScan query 07:50:33 SkyScan query done: ret=0 az=153.165<-10211 ze=8.955<-11403 Statuses=0009 0009 07:50:33 Msec=0 True Az=153.165 Ze=8.955 Az status=0009 Ze status=0009 07:50:33 Check angles 07:50:33 SkyScan query 07:50:34 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.045<-12803 Statuses=0009 0009 07:50:34 Msec=750 True Az=135.735 Ze=-12.045 Az status=0009 Ze status=0009 07:50:34 Check angles 07:50:34 SkyScan query 07:50:35 SkyScan query done: ret=0 az=118.185<-7879 ze=-32.955<-14197 Statuses=0009 0009 07:50:35 Msec=1500 True Az=118.185 Ze=-32.955 Az status=0009 Ze status=0009 07:50:35 Check angles 07:50:35 SkyScan query 07:50:35 SkyScan query done: ret=0 az=100.785<-6719 ze=-51.51<-15434 Statuses=0009 0009 07:50:35 Msec=2250 True Az=100.785 Ze=-51.51 Az status=0009 Ze status=0009 07:50:36 Check angles 07:50:36 SkyScan query 07:50:36 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 07:50:36 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 07:50:36 Check angles 07:50:36 SkyScan query 07:50:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:50:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:50:37 Message to Master queued w/err=0: serial=214569 error=0 07:50:42 Received message from Master: op=Filter serial=214570 07:50:42 Color wheel filter change from 0 to 0 07:50:42 FLIGetFilterPos err=0 currentPosition=0 07:50:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:42 Filter is already there-color wheel unchanged 07:50:42 Received message from Master: op=Shutter serial=214571 07:50:42 Shutter LASER close 07:50:42 Received message from Camera: op=State serial=214573 07:50:42 GetSingleValue result=40 Value=cccccccc 07:50:42 SkyScan query 07:50:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:50:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:43 Parameters OK 07:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:43 Set A/D data flow result=40 07:50:43 Set A/D channel type result=40 07:50:43 Set A/D encoding result=40 07:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:43 Set channel filter=0.000000e+000 result=40 07:50:43 Config A/D Result=40 07:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:43 Get A/D filter: -9.255963e+061 result=40 07:50:43 Get A/D value=-858993460 result=40 07:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:43 Parameters OK 07:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:43 Set A/D data flow result=40 07:50:43 Set A/D channel type result=40 07:50:43 Set A/D encoding result=40 07:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:43 Set channel filter=0.000000e+000 result=40 07:50:43 Config A/D Result=40 07:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:43 Get A/D filter: -9.255963e+061 result=40 07:50:43 Get A/D value=-858993460 result=40 07:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:43 Aux= 07:50:43 Message to Camera, serial 214573 queued 07:51:20 Received message from Master: op=PointingHead serial=214586 07:51:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:51:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:51:20 Point started: ret=0 07:51:20 point_skyscan result=0 07:51:21 Check angles 07:51:21 SkyScan query 07:51:21 SkyScan query done: ret=0 az=108.78<-7252 ze=-81<-17400 Statuses=0009 0009 07:51:21 Msec=0 True Az=108.78 Ze=-81 Az status=0009 Ze status=0009 07:51:21 Check angles 07:51:21 SkyScan query 07:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 07:51:22 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 07:51:22 Check angles 07:51:22 SkyScan query 07:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 07:51:23 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 07:51:23 Check angles 07:51:23 SkyScan query 07:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.895<-21593 Statuses=0008 0009 07:51:23 Msec=2250 True Az=112.995 Ze=-143.895 Az status=0008 Ze status=0009 07:51:24 Check angles 07:51:24 SkyScan query 07:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 07:51:24 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 07:51:24 Check angles 07:51:24 SkyScan query 07:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:51:25 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:51:25 Message to Master queued w/err=0: serial=214586 error=0 07:51:30 Received message from Master: op=Filter serial=214587 07:51:30 Color wheel filter change from 0 to 0 07:51:30 FLIGetFilterPos err=0 currentPosition=0 07:51:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:30 Filter is already there-color wheel unchanged 07:51:30 Received message from Master: op=Shutter serial=214588 07:51:30 Shutter LASER open 07:51:30 Received message from Camera: op=State serial=214590 07:51:30 GetSingleValue result=40 Value=cccccccc 07:51:30 SkyScan query 07:51:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:51:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:31 Parameters OK 07:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:31 Set A/D data flow result=40 07:51:31 Set A/D channel type result=40 07:51:31 Set A/D encoding result=40 07:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:31 Set channel filter=0.000000e+000 result=40 07:51:31 Config A/D Result=40 07:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:31 Get A/D filter: -9.255963e+061 result=40 07:51:31 Get A/D value=-858993460 result=40 07:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:31 Parameters OK 07:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:31 Set A/D data flow result=40 07:51:31 Set A/D channel type result=40 07:51:31 Set A/D encoding result=40 07:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:31 Set channel filter=0.000000e+000 result=40 07:51:31 Config A/D Result=40 07:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:31 Get A/D filter: -9.255963e+061 result=40 07:51:31 Get A/D value=-858993460 result=40 07:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:31 Aux= 07:51:31 Message to Camera, serial 214590 queued 07:51:39 Received message from Master: op=Shutter serial=214600 07:51:39 Shutter LASER close 07:51:40 Received message from Master: op=PointingHead serial=214604 07:51:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:51:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:51:40 Point started: ret=0 07:51:40 point_skyscan result=0 07:51:41 Check angles 07:51:41 SkyScan query 07:51:41 SkyScan query done: ret=0 az=89.88<-5992 ze=157.335<-1511 Statuses=0009 0009 07:51:41 Msec=0 True Az=89.88 Ze=157.335 Az status=0009 Ze status=0009 07:51:42 Check angles 07:51:42 SkyScan query 07:51:42 SkyScan query done: ret=0 az=72<-4800 ze=135.96<-2936 Statuses=0009 0009 07:51:42 Msec=750 True Az=72 Ze=135.96 Az status=0009 Ze status=0009 07:51:42 Check angles 07:51:42 SkyScan query 07:51:43 SkyScan query done: ret=0 az=54.3<-3620 ze=114.51<-4366 Statuses=0009 0009 07:51:43 Msec=1500 True Az=54.3 Ze=114.51 Az status=0009 Ze status=0009 07:51:43 Check angles 07:51:43 SkyScan query 07:51:44 SkyScan query done: ret=0 az=40.935<-2729 ze=93.6<-5760 Statuses=0009 0009 07:51:44 Msec=2250 True Az=40.935 Ze=93.6 Az status=0009 Ze status=0009 07:51:44 Check angles 07:51:44 SkyScan query 07:51:44 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 07:51:44 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 07:51:45 Check angles 07:51:45 SkyScan query 07:51:45 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 07:51:45 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 07:51:45 Check angles 07:51:45 SkyScan query 07:51:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:51:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:51:46 Message to Master queued w/err=0: serial=214604 error=0 07:51:51 Received message from Master: op=Filter serial=214605 07:51:51 Color wheel filter change from 0 to 0 07:51:51 FLIGetFilterPos err=0 currentPosition=0 07:51:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:51 Filter is already there-color wheel unchanged 07:51:51 Received message from Master: op=Shutter serial=214606 07:51:51 Shutter LASER close 07:51:51 Received message from Camera: op=State serial=214608 07:51:51 GetSingleValue result=40 Value=cccccccc 07:51:51 SkyScan query 07:51:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:51:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:52 Parameters OK 07:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:52 Set A/D data flow result=40 07:51:52 Set A/D channel type result=40 07:51:52 Set A/D encoding result=40 07:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:52 Set channel filter=0.000000e+000 result=40 07:51:52 Config A/D Result=40 07:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:52 Get A/D filter: -9.255963e+061 result=40 07:51:52 Get A/D value=-858993460 result=40 07:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:52 Parameters OK 07:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:52 Set A/D data flow result=40 07:51:52 Set A/D channel type result=40 07:51:52 Set A/D encoding result=40 07:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:52 Set channel filter=0.000000e+000 result=40 07:51:52 Config A/D Result=40 07:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:52 Get A/D filter: -9.255963e+061 result=40 07:51:52 Get A/D value=-858993460 result=40 07:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:52 Aux= 07:51:52 Message to Camera, serial 214608 queued 07:52:29 Received message from Master: op=PointingHead serial=214621 07:52:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:52:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:52:29 Point started: ret=0 07:52:29 point_skyscan result=0 07:52:30 Check angles 07:52:30 SkyScan query 07:52:30 SkyScan query done: ret=0 az=64.215<-4281 ze=66.51<-7566 Statuses=0009 0008 07:52:30 Msec=0 True Az=64.215 Ze=66.51 Az status=0009 Ze status=0008 07:52:31 Check angles 07:52:31 SkyScan query 07:52:31 SkyScan query done: ret=0 az=81.63<-5442 ze=66.51<-7566 Statuses=0009 0008 07:52:31 Msec=750 True Az=81.63 Ze=66.51 Az status=0009 Ze status=0008 07:52:31 Check angles 07:52:31 SkyScan query 07:52:32 SkyScan query done: ret=0 az=99.135<-6609 ze=66.51<-7566 Statuses=0009 0008 07:52:32 Msec=1500 True Az=99.135 Ze=66.51 Az status=0009 Ze status=0008 07:52:32 Check angles 07:52:32 SkyScan query 07:52:33 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 07:52:33 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 07:52:33 Check angles 07:52:33 SkyScan query 07:52:33 SkyScan query done: ret=0 az=134.565<-8971 ze=66.495<-7567 Statuses=0009 0008 07:52:33 Msec=3000 True Az=134.565 Ze=66.495 Az status=0009 Ze status=0008 07:52:34 Check angles 07:52:34 SkyScan query 07:52:34 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 07:52:34 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 07:52:34 Check angles 07:52:34 SkyScan query 07:52:35 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:52:35 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:52:35 Message to Master queued w/err=0: serial=214621 error=0 07:52:40 Received message from Master: op=Filter serial=214622 07:52:40 Color wheel filter change from 0 to 0 07:52:40 FLIGetFilterPos err=0 currentPosition=0 07:52:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:40 Filter is already there-color wheel unchanged 07:52:40 Received message from Master: op=Shutter serial=214623 07:52:40 Shutter LASER close 07:52:40 Received message from Camera: op=State serial=214625 07:52:40 GetSingleValue result=40 Value=cccccccc 07:52:40 SkyScan query 07:52:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:52:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:41 Parameters OK 07:52:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:41 Set A/D data flow result=40 07:52:41 Set A/D channel type result=40 07:52:41 Set A/D encoding result=40 07:52:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:41 Set channel filter=0.000000e+000 result=40 07:52:41 Config A/D Result=40 07:52:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:41 Get A/D filter: -9.255963e+061 result=40 07:52:41 Get A/D value=-858993460 result=40 07:52:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:41 Parameters OK 07:52:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:41 Set A/D data flow result=40 07:52:41 Set A/D channel type result=40 07:52:41 Set A/D encoding result=40 07:52:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:41 Set channel filter=0.000000e+000 result=40 07:52:41 Config A/D Result=40 07:52:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:41 Get A/D filter: -9.255963e+061 result=40 07:52:41 Get A/D value=-858993460 result=40 07:52:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:41 Aux= 07:52:41 Message to Camera, serial 214625 queued 07:53:18 Received message from Master: op=PointingHead serial=214638 07:53:18 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:53:18 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:53:18 Point started: ret=0 07:53:18 point_skyscan result=0 07:53:19 Check angles 07:53:19 SkyScan query 07:53:19 SkyScan query done: ret=0 az=135.12<-9008 ze=96.06<-5596 Statuses=0009 0009 07:53:19 Msec=0 True Az=135.12 Ze=96.06 Az status=0009 Ze status=0009 07:53:19 Check angles 07:53:19 SkyScan query 07:53:20 SkyScan query done: ret=0 az=130.995<-8733 ze=117.45<-4170 Statuses=0008 0009 07:53:20 Msec=750 True Az=130.995 Ze=117.45 Az status=0008 Ze status=0009 07:53:20 Check angles 07:53:20 SkyScan query 07:53:21 SkyScan query done: ret=0 az=130.995<-8733 ze=138.345<-2777 Statuses=0008 0009 07:53:21 Msec=1500 True Az=130.995 Ze=138.345 Az status=0008 Ze status=0009 07:53:21 Check angles 07:53:21 SkyScan query 07:53:22 SkyScan query done: ret=0 az=130.995<-8733 ze=159.345<-1377 Statuses=0008 0009 07:53:22 Msec=2250 True Az=130.995 Ze=159.345 Az status=0008 Ze status=0009 07:53:22 Check angles 07:53:22 SkyScan query 07:53:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.28<-23952 Statuses=0008 0009 07:53:22 Msec=3000 True Az=130.995 Ze=-179.28 Az status=0008 Ze status=0009 07:53:22 Check angles 07:53:22 SkyScan query 07:53:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.31<-22554 Statuses=0008 0009 07:53:23 Msec=3750 True Az=130.995 Ze=-158.31 Az status=0008 Ze status=0009 07:53:23 Check angles 07:53:23 SkyScan query 07:53:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 07:53:24 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 07:53:24 Check angles 07:53:24 SkyScan query 07:53:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:53:25 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:53:25 Message to Master queued w/err=0: serial=214638 error=0 07:53:30 Received message from Master: op=Filter serial=214639 07:53:30 Color wheel filter change from 0 to 0 07:53:30 FLIGetFilterPos err=0 currentPosition=0 07:53:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:30 Filter is already there-color wheel unchanged 07:53:30 Received message from Master: op=Shutter serial=214640 07:53:30 Shutter LASER close 07:53:30 Received message from Camera: op=State serial=214642 07:53:30 GetSingleValue result=40 Value=cccccccc 07:53:30 SkyScan query 07:53:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:53:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:30 Parameters OK 07:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:30 Set A/D data flow result=40 07:53:30 Set A/D channel type result=40 07:53:30 Set A/D encoding result=40 07:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:30 Set channel filter=0.000000e+000 result=40 07:53:30 Config A/D Result=40 07:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:30 Get A/D filter: -9.255963e+061 result=40 07:53:30 Get A/D value=-858993460 result=40 07:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:30 Parameters OK 07:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:30 Set A/D data flow result=40 07:53:30 Set A/D channel type result=40 07:53:30 Set A/D encoding result=40 07:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:30 Set channel filter=0.000000e+000 result=40 07:53:30 Config A/D Result=40 07:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:30 Get A/D filter: -9.255963e+061 result=40 07:53:30 Get A/D value=-858993460 result=40 07:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:30 Aux= 07:53:30 Message to Camera, serial 214642 queued 07:54:07 Received message from Master: op=PointingHead serial=214655 07:54:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:54:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:54:08 Point started: ret=0 07:54:08 point_skyscan result=0 07:54:08 Check angles 07:54:08 SkyScan query 07:54:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 07:54:09 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 07:54:09 Check angles 07:54:09 SkyScan query 07:54:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:54:10 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:54:10 Message to Master queued w/err=0: serial=214655 error=0 07:54:15 Received message from Master: op=Filter serial=214656 07:54:15 Color wheel filter change from 0 to 0 07:54:15 FLIGetFilterPos err=0 currentPosition=0 07:54:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:15 Filter is already there-color wheel unchanged 07:54:15 Received message from Master: op=Shutter serial=214657 07:54:15 Shutter LASER open 07:54:15 Received message from Camera: op=State serial=214659 07:54:15 GetSingleValue result=40 Value=cccccccc 07:54:15 SkyScan query 07:54:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:54:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:16 Parameters OK 07:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:16 Set A/D data flow result=40 07:54:16 Set A/D channel type result=40 07:54:16 Set A/D encoding result=40 07:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:16 Set channel filter=0.000000e+000 result=40 07:54:16 Config A/D Result=40 07:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:16 Get A/D filter: -9.255963e+061 result=40 07:54:16 Get A/D value=-858993460 result=40 07:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:16 Parameters OK 07:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:16 Set A/D data flow result=40 07:54:16 Set A/D channel type result=40 07:54:16 Set A/D encoding result=40 07:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:16 Set channel filter=0.000000e+000 result=40 07:54:16 Config A/D Result=40 07:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:16 Get A/D filter: -9.255963e+061 result=40 07:54:16 Get A/D value=-858993460 result=40 07:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:16 Aux= 07:54:16 Message to Camera, serial 214659 queued 07:54:24 Received message from Master: op=Shutter serial=214669 07:54:24 Shutter LASER close 07:54:25 Received message from Master: op=PointingHead serial=214673 07:54:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:54:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:54:25 Point started: ret=0 07:54:25 point_skyscan result=0 07:54:26 Check angles 07:54:26 SkyScan query 07:54:26 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.475<-21565 Statuses=0009 0009 07:54:26 Msec=0 True Az=135.75 Ze=-143.475 Az status=0009 Ze status=0009 07:54:27 Check angles 07:54:27 SkyScan query 07:54:27 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.01<-20134 Statuses=0009 0009 07:54:27 Msec=750 True Az=153.57 Ze=-122.01 Az status=0009 Ze status=0009 07:54:27 Check angles 07:54:27 SkyScan query 07:54:28 SkyScan query done: ret=0 az=171.54<-11436 ze=-100.62<-18708 Statuses=0009 0009 07:54:28 Msec=1500 True Az=171.54 Ze=-100.62 Az status=0009 Ze status=0009 07:54:28 Check angles 07:54:28 SkyScan query 07:54:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 07:54:29 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 07:54:29 Check angles 07:54:29 SkyScan query 07:54:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.755<-15917 Statuses=0008 0009 07:54:29 Msec=3000 True Az=176.01 Ze=-58.755 Az status=0008 Ze status=0009 07:54:30 Check angles 07:54:30 SkyScan query 07:54:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 07:54:30 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 07:54:30 Message to Master queued w/err=0: serial=214673 error=0 07:54:35 Received message from Master: op=Filter serial=214674 07:54:35 Color wheel filter change from 0 to 0 07:54:35 FLIGetFilterPos err=0 currentPosition=0 07:54:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:35 Filter is already there-color wheel unchanged 07:54:35 Received message from Master: op=Shutter serial=214675 07:54:35 Shutter LASER close 07:54:35 Received message from Camera: op=State serial=214677 07:54:35 GetSingleValue result=40 Value=cccccccc 07:54:35 SkyScan query 07:54:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:54:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:36 Parameters OK 07:54:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:36 Set A/D data flow result=40 07:54:36 Set A/D channel type result=40 07:54:36 Set A/D encoding result=40 07:54:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:36 Set channel filter=0.000000e+000 result=40 07:54:36 Config A/D Result=40 07:54:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:36 Get A/D filter: -9.255963e+061 result=40 07:54:36 Get A/D value=-858993460 result=40 07:54:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:36 Parameters OK 07:54:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:36 Set A/D data flow result=40 07:54:36 Set A/D channel type result=40 07:54:36 Set A/D encoding result=40 07:54:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:36 Set channel filter=0.000000e+000 result=40 07:54:36 Config A/D Result=40 07:54:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:36 Get A/D filter: -9.255963e+061 result=40 07:54:36 Get A/D value=-858993460 result=40 07:54:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:36 Aux= 07:54:36 Message to Camera, serial 214677 queued 07:55:13 Received message from Master: op=PointingHead serial=214690 07:55:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:55:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:55:13 Point started: ret=0 07:55:13 point_skyscan result=0 07:55:14 Check angles 07:55:14 SkyScan query 07:55:15 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.78<-13452 Statuses=0009 0009 07:55:15 Msec=0 True Az=152.925 Ze=-21.78 Az status=0009 Ze status=0009 07:55:15 Check angles 07:55:15 SkyScan query 07:55:15 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.75<-12050 Statuses=0009 0009 07:55:15 Msec=750 True Az=135.45 Ze=-0.75 Az status=0009 Ze status=0009 07:55:15 Check angles 07:55:15 SkyScan query 07:55:16 SkyScan query done: ret=0 az=117.585<-7839 ze=20.7<-10620 Statuses=0009 0009 07:55:16 Msec=1500 True Az=117.585 Ze=20.7 Az status=0009 Ze status=0009 07:55:16 Check angles 07:55:16 SkyScan query 07:55:17 SkyScan query done: ret=0 az=100.245<-6683 ze=41.58<-9228 Statuses=0009 0009 07:55:17 Msec=2250 True Az=100.245 Ze=41.58 Az status=0009 Ze status=0009 07:55:17 Check angles 07:55:17 SkyScan query 07:55:18 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 07:55:18 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 07:55:18 Check angles 07:55:18 SkyScan query 07:55:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:55:18 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 07:55:18 Message to Master queued w/err=0: serial=214690 error=0 07:55:23 Received message from Master: op=Filter serial=214691 07:55:23 Color wheel filter change from 0 to 0 07:55:23 FLIGetFilterPos err=0 currentPosition=0 07:55:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:23 Filter is already there-color wheel unchanged 07:55:23 Received message from Master: op=Shutter serial=214692 07:55:23 Shutter LASER close 07:55:24 Received message from Camera: op=State serial=214694 07:55:24 GetSingleValue result=40 Value=cccccccc 07:55:24 SkyScan query 07:55:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:55:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:24 Parameters OK 07:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:24 Set A/D data flow result=40 07:55:24 Set A/D channel type result=40 07:55:24 Set A/D encoding result=40 07:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:24 Set channel filter=0.000000e+000 result=40 07:55:24 Config A/D Result=40 07:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:24 Get A/D filter: -9.255963e+061 result=40 07:55:24 Get A/D value=-858993460 result=40 07:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:24 Parameters OK 07:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:24 Set A/D data flow result=40 07:55:24 Set A/D channel type result=40 07:55:24 Set A/D encoding result=40 07:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:24 Set channel filter=0.000000e+000 result=40 07:55:24 Config A/D Result=40 07:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:24 Get A/D filter: -9.255963e+061 result=40 07:55:24 Get A/D value=-858993460 result=40 07:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 [UTC 2018-12-17 07:55:24] 07:55:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:24 Aux= 07:55:24 Message to Camera, serial 214694 queued [UTC 2018-12-17 07:55:52] 07:56:01 Received message from Master: op=PointingHead serial=214707 07:56:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:56:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:56:01 Point started: ret=0 07:56:01 point_skyscan result=0 07:56:02 Check angles 07:56:02 SkyScan query 07:56:03 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 07:56:03 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 07:56:03 Check angles 07:56:03 SkyScan query 07:56:03 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 07:56:03 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 07:56:04 Check angles 07:56:04 SkyScan query 07:56:04 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 07:56:04 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 07:56:04 Check angles 07:56:04 SkyScan query 07:56:05 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 07:56:05 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 07:56:05 Check angles 07:56:05 SkyScan query 07:56:06 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:56:06 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:56:06 Check angles 07:56:06 SkyScan query 07:56:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:56:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:56:06 Message to Master queued w/err=0: serial=214707 error=0 07:56:11 Received message from Master: op=Filter serial=214708 07:56:11 Color wheel filter change from 0 to 0 07:56:11 FLIGetFilterPos err=0 currentPosition=0 07:56:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:11 Filter is already there-color wheel unchanged 07:56:12 Received message from Master: op=Shutter serial=214709 07:56:12 Shutter LASER close 07:56:12 Received message from Camera: op=State serial=214711 07:56:12 GetSingleValue result=40 Value=cccccccc 07:56:12 SkyScan query 07:56:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:56:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:12 Parameters OK 07:56:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:12 Set A/D data flow result=40 07:56:12 Set A/D channel type result=40 07:56:12 Set A/D encoding result=40 07:56:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:12 Set channel filter=0.000000e+000 result=40 07:56:12 Config A/D Result=40 07:56:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:12 Get A/D filter: -9.255963e+061 result=40 07:56:12 Get A/D value=-858993460 result=40 07:56:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:12 Parameters OK 07:56:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:12 Set A/D data flow result=40 07:56:12 Set A/D channel type result=40 07:56:12 Set A/D encoding result=40 07:56:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:12 Set channel filter=0.000000e+000 result=40 07:56:12 Config A/D Result=40 07:56:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:12 Get A/D filter: -9.255963e+061 result=40 07:56:12 Get A/D value=-858993460 result=40 07:56:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:12 Aux= 07:56:12 Message to Camera, serial 214711 queued 07:56:49 Received message from Master: op=PointingHead serial=214724 07:56:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:56:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:56:49 Point started: ret=0 07:56:49 point_skyscan result=0 07:56:50 Check angles 07:56:50 SkyScan query 07:56:51 SkyScan query done: ret=0 az=153.21<-10214 ze=8.97<-11402 Statuses=0009 0009 07:56:51 Msec=0 True Az=153.21 Ze=8.97 Az status=0009 Ze status=0009 07:56:51 Check angles 07:56:51 SkyScan query 07:56:51 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.405<-12827 Statuses=0009 0009 07:56:51 Msec=750 True Az=135.435 Ze=-12.405 Az status=0009 Ze status=0009 07:56:52 Check angles 07:56:52 SkyScan query 07:56:52 SkyScan query done: ret=0 az=117.51<-7834 ze=-33.87<-14258 Statuses=0009 0009 07:56:52 Msec=1500 True Az=117.51 Ze=-33.87 Az status=0009 Ze status=0009 07:56:52 Check angles 07:56:52 SkyScan query 07:56:53 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.555<-15437 Statuses=0009 0009 07:56:53 Msec=2250 True Az=100.14 Ze=-51.555 Az status=0009 Ze status=0009 07:56:53 Check angles 07:56:53 SkyScan query 07:56:54 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:56:54 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:56:54 Check angles 07:56:54 SkyScan query 07:56:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:56:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:56:55 Message to Master queued w/err=0: serial=214724 error=0 07:57:00 Received message from Master: op=Filter serial=214725 07:57:00 Color wheel filter change from 0 to 0 07:57:00 FLIGetFilterPos err=0 currentPosition=0 07:57:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:00 Filter is already there-color wheel unchanged 07:57:00 Received message from Master: op=Shutter serial=214726 07:57:00 Shutter LASER close 07:57:00 Received message from Camera: op=State serial=214728 07:57:00 GetSingleValue result=40 Value=cccccccc 07:57:00 SkyScan query 07:57:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:57:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:00 Parameters OK 07:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:00 Set A/D data flow result=40 07:57:00 Set A/D channel type result=40 07:57:00 Set A/D encoding result=40 07:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:00 Set channel filter=0.000000e+000 result=40 07:57:00 Config A/D Result=40 07:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:00 Get A/D filter: -9.255963e+061 result=40 07:57:00 Get A/D value=-858993460 result=40 07:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:00 Parameters OK 07:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:00 Set A/D data flow result=40 07:57:00 Set A/D channel type result=40 07:57:00 Set A/D encoding result=40 07:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:00 Set channel filter=0.000000e+000 result=40 07:57:00 Config A/D Result=40 07:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:00 Get A/D filter: -9.255963e+061 result=40 07:57:00 Get A/D value=-858993460 result=40 07:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:00 Aux= 07:57:00 Message to Camera, serial 214728 queued 07:57:37 Received message from Master: op=PointingHead serial=214741 07:57:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:57:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:57:37 Point started: ret=0 07:57:37 point_skyscan result=0 07:57:38 Check angles 07:57:38 SkyScan query 07:57:39 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.045<-17403 Statuses=0009 0009 07:57:39 Msec=0 True Az=108.87 Ze=-81.045 Az status=0009 Ze status=0009 07:57:39 Check angles 07:57:39 SkyScan query 07:57:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 07:57:40 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 07:57:40 Check angles 07:57:40 SkyScan query 07:57:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 07:57:40 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 07:57:40 Check angles 07:57:40 SkyScan query 07:57:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 07:57:41 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 07:57:41 Check angles 07:57:41 SkyScan query 07:57:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 07:57:42 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 07:57:42 Check angles 07:57:42 SkyScan query 07:57:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:57:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:57:43 Message to Master queued w/err=0: serial=214741 error=0 07:57:48 Received message from Master: op=Filter serial=214742 07:57:48 Color wheel filter change from 0 to 0 07:57:48 FLIGetFilterPos err=0 currentPosition=0 07:57:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:48 Filter is already there-color wheel unchanged 07:57:48 Received message from Master: op=Shutter serial=214743 07:57:48 Shutter LASER open 07:57:48 Received message from Camera: op=State serial=214745 07:57:48 GetSingleValue result=40 Value=cccccccc 07:57:48 SkyScan query 07:57:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:57:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:48 Parameters OK 07:57:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:48 Set A/D data flow result=40 07:57:48 Set A/D channel type result=40 07:57:48 Set A/D encoding result=40 07:57:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:48 Set channel filter=0.000000e+000 result=40 07:57:48 Config A/D Result=40 07:57:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:48 Get A/D filter: -9.255963e+061 result=40 07:57:48 Get A/D value=-858993460 result=40 07:57:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:48 Parameters OK 07:57:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:48 Set A/D data flow result=40 07:57:48 Set A/D channel type result=40 07:57:48 Set A/D encoding result=40 07:57:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:48 Set channel filter=0.000000e+000 result=40 07:57:48 Config A/D Result=40 07:57:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:48 Get A/D filter: -9.255963e+061 result=40 07:57:48 Get A/D value=-858993460 result=40 07:57:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:48 Aux= 07:57:48 Message to Camera, serial 214745 queued 07:57:57 Received message from Master: op=Shutter serial=214755 07:57:57 Shutter LASER close 07:57:57 Received message from Master: op=PointingHead serial=214759 07:57:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:57:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:57:58 Point started: ret=0 07:57:58 point_skyscan result=0 07:57:58 Check angles 07:57:58 SkyScan query 07:57:59 SkyScan query done: ret=0 az=89.88<-5992 ze=157.155<-1523 Statuses=0009 0009 07:57:59 Msec=0 True Az=89.88 Ze=157.155 Az status=0009 Ze status=0009 07:57:59 Check angles 07:57:59 SkyScan query 07:58:00 SkyScan query done: ret=0 az=72.27<-4818 ze=136.2<-2920 Statuses=0009 0009 07:58:00 Msec=750 True Az=72.27 Ze=136.2 Az status=0009 Ze status=0009 07:58:00 Check angles 07:58:00 SkyScan query 07:58:01 SkyScan query done: ret=0 az=54.93<-3662 ze=115.26<-4316 Statuses=0009 0009 07:58:01 Msec=1500 True Az=54.93 Ze=115.26 Az status=0009 Ze status=0009 07:58:01 Check angles 07:58:01 SkyScan query 07:58:01 SkyScan query done: ret=0 az=40.965<-2731 ze=94.29<-5714 Statuses=0009 0009 07:58:01 Msec=2250 True Az=40.965 Ze=94.29 Az status=0009 Ze status=0009 07:58:01 Check angles 07:58:01 SkyScan query 07:58:02 SkyScan query done: ret=0 az=40.995<-2733 ze=73.335<-7111 Statuses=0008 0009 07:58:02 Msec=3000 True Az=40.995 Ze=73.335 Az status=0008 Ze status=0009 07:58:02 Check angles 07:58:02 SkyScan query 07:58:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.785<-8481 Statuses=0008 0009 07:58:03 Msec=3750 True Az=40.995 Ze=52.785 Az status=0008 Ze status=0009 07:58:03 Check angles 07:58:03 SkyScan query 07:58:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:58:04 Msec=4500 True Az=40.995 Ze=51.495 Az status=0008 Ze status=0008 07:58:04 Message to Master queued w/err=0: serial=214759 error=0 07:58:09 Received message from Master: op=Filter serial=214760 07:58:09 Color wheel filter change from 0 to 0 07:58:09 FLIGetFilterPos err=0 currentPosition=0 07:58:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:09 Filter is already there-color wheel unchanged 07:58:09 Received message from Master: op=Shutter serial=214761 07:58:09 Shutter LASER close 07:58:09 Received message from Camera: op=State serial=214763 07:58:09 GetSingleValue result=40 Value=cccccccc 07:58:09 SkyScan query 07:58:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.51<-8566 Statuses=0008 0008 07:58:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:09 Parameters OK 07:58:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:09 Set A/D data flow result=40 07:58:09 Set A/D channel type result=40 07:58:09 Set A/D encoding result=40 07:58:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:09 Set channel filter=0.000000e+000 result=40 07:58:09 Config A/D Result=40 07:58:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:09 Get A/D filter: -9.255963e+061 result=40 07:58:09 Get A/D value=-858993460 result=40 07:58:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:09 Parameters OK 07:58:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:09 Set A/D data flow result=40 07:58:09 Set A/D channel type result=40 07:58:09 Set A/D encoding result=40 07:58:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:09 Set channel filter=0.000000e+000 result=40 07:58:09 Config A/D Result=40 07:58:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:09 Get A/D filter: -9.255963e+061 result=40 07:58:09 Get A/D value=-858993460 result=40 07:58:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.509998 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:09 Aux= 07:58:09 Message to Camera, serial 214763 queued 07:58:46 Received message from Master: op=PointingHead serial=214776 07:58:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:58:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:58:47 Point started: ret=0 07:58:47 point_skyscan result=0 07:58:47 Check angles 07:58:47 SkyScan query 07:58:48 SkyScan query done: ret=0 az=64.35<-4290 ze=66.51<-7566 Statuses=0009 0008 07:58:48 Msec=0 True Az=64.35 Ze=66.51 Az status=0009 Ze status=0008 07:58:48 Check angles 07:58:48 SkyScan query 07:58:49 SkyScan query done: ret=0 az=81.825<-5455 ze=66.51<-7566 Statuses=0009 0008 07:58:49 Msec=750 True Az=81.825 Ze=66.51 Az status=0009 Ze status=0008 07:58:49 Check angles 07:58:49 SkyScan query 07:58:49 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 07:58:49 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 07:58:50 Check angles 07:58:50 SkyScan query 07:58:50 SkyScan query done: ret=0 az=117.6<-7840 ze=66.495<-7567 Statuses=0009 0008 07:58:50 Msec=2250 True Az=117.6 Ze=66.495 Az status=0009 Ze status=0008 07:58:50 Check angles 07:58:50 SkyScan query 07:58:51 SkyScan query done: ret=0 az=135.435<-9029 ze=66.495<-7567 Statuses=0009 0008 07:58:51 Msec=3000 True Az=135.435 Ze=66.495 Az status=0009 Ze status=0008 07:58:51 Check angles 07:58:51 SkyScan query 07:58:52 SkyScan query done: ret=0 az=152.88<-10192 ze=66.495<-7567 Statuses=0009 0008 07:58:52 Msec=3750 True Az=152.88 Ze=66.495 Az status=0009 Ze status=0008 07:58:52 Check angles 07:58:52 SkyScan query 07:58:52 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:58:52 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:58:52 Message to Master queued w/err=0: serial=214776 error=0 07:58:57 Received message from Master: op=Filter serial=214777 07:58:57 Color wheel filter change from 0 to 0 07:58:57 FLIGetFilterPos err=0 currentPosition=0 07:58:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:57 Filter is already there-color wheel unchanged 07:58:58 Received message from Master: op=Shutter serial=214778 07:58:58 Shutter LASER close 07:58:58 Received message from Camera: op=State serial=214780 07:58:58 GetSingleValue result=40 Value=cccccccc 07:58:58 SkyScan query 07:58:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:58:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:58 Parameters OK 07:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:58 Set A/D data flow result=40 07:58:58 Set A/D channel type result=40 07:58:58 Set A/D encoding result=40 07:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:58 Set channel filter=0.000000e+000 result=40 07:58:58 Config A/D Result=40 07:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:58 Get A/D filter: -9.255963e+061 result=40 07:58:58 Get A/D value=-858993460 result=40 07:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:58 Parameters OK 07:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:58 Set A/D data flow result=40 07:58:58 Set A/D channel type result=40 07:58:58 Set A/D encoding result=40 07:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:58 Set channel filter=0.000000e+000 result=40 07:58:58 Config A/D Result=40 07:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:58 Get A/D filter: -9.255963e+061 result=40 07:58:58 Get A/D value=-858993460 result=40 07:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:58 Aux= 07:58:58 Message to Camera, serial 214780 queued 07:59:34 Received message from Master: op=PointingHead serial=214792 07:59:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:59:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:59:35 Point started: ret=0 07:59:35 point_skyscan result=0 07:59:35 Check angles 07:59:35 SkyScan query 07:59:36 SkyScan query done: ret=0 az=134.595<-8973 ze=96.705<-5553 Statuses=0009 0009 07:59:36 Msec=0 True Az=134.595 Ze=96.705 Az status=0009 Ze status=0009 07:59:36 Check angles 07:59:36 SkyScan query 07:59:37 SkyScan query done: ret=0 az=130.995<-8733 ze=117.645<-4157 Statuses=0008 0009 07:59:37 Msec=750 True Az=130.995 Ze=117.645 Az status=0008 Ze status=0009 07:59:37 Check angles 07:59:37 SkyScan query 07:59:38 SkyScan query done: ret=0 az=130.98<-8732 ze=138.57<-2762 Statuses=0008 0009 07:59:38 Msec=1500 True Az=130.98 Ze=138.57 Az status=0008 Ze status=0009 07:59:38 Check angles 07:59:38 SkyScan query 07:59:38 SkyScan query done: ret=0 az=130.995<-8733 ze=159.99<-1334 Statuses=0008 0009 07:59:38 Msec=2250 True Az=130.995 Ze=159.99 Az status=0008 Ze status=0009 07:59:39 Check angles 07:59:39 SkyScan query 07:59:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.62<-23908 Statuses=0008 0009 07:59:39 Msec=3000 True Az=130.995 Ze=-178.62 Az status=0008 Ze status=0009 07:59:39 Check angles 07:59:39 SkyScan query 07:59:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.695<-22513 Statuses=0008 0009 07:59:40 Msec=3750 True Az=130.995 Ze=-157.695 Az status=0008 Ze status=0009 07:59:40 Check angles 07:59:40 SkyScan query 07:59:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 07:59:41 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 07:59:41 Check angles 07:59:41 SkyScan query 07:59:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 07:59:41 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 07:59:41 Message to Master queued w/err=0: serial=214792 error=0 07:59:46 Received message from Master: op=Filter serial=214793 07:59:46 Color wheel filter change from 0 to 0 07:59:46 FLIGetFilterPos err=0 currentPosition=0 07:59:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:46 Filter is already there-color wheel unchanged 07:59:47 Received message from Master: op=Shutter serial=214794 07:59:47 Shutter LASER close 07:59:47 Received message from Camera: op=State serial=214796 07:59:47 GetSingleValue result=40 Value=cccccccc 07:59:47 SkyScan query 07:59:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:59:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:47 Parameters OK 07:59:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:47 Set A/D data flow result=40 07:59:47 Set A/D channel type result=40 07:59:47 Set A/D encoding result=40 07:59:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:47 Set channel filter=0.000000e+000 result=40 07:59:47 Config A/D Result=40 07:59:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:47 Get A/D filter: -9.255963e+061 result=40 07:59:47 Get A/D value=-858993460 result=40 07:59:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:47 Parameters OK 07:59:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:47 Set A/D data flow result=40 07:59:47 Set A/D channel type result=40 07:59:47 Set A/D encoding result=40 07:59:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:47 Set channel filter=0.000000e+000 result=40 07:59:47 Config A/D Result=40 07:59:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:47 Get A/D filter: -9.255963e+061 result=40 07:59:47 Get A/D value=-858993460 result=40 07:59:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:47 Aux= 07:59:47 Message to Camera, serial 214796 queued 08:00:24 Received message from Master: op=PointingHead serial=214809 08:00:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:00:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:00:24 Point started: ret=0 08:00:24 point_skyscan result=0 08:00:25 Check angles 08:00:25 SkyScan query 08:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.255<-23417 Statuses=0009 0009 08:00:26 Msec=0 True Az=112.995 Ze=-171.255 Az status=0009 Ze status=0009 08:00:26 Check angles 08:00:26 SkyScan query 08:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:00:26 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:00:26 Message to Master queued w/err=0: serial=214809 error=0 08:00:31 Received message from Master: op=Filter serial=214810 08:00:31 Color wheel filter change from 0 to 0 08:00:31 FLIGetFilterPos err=0 currentPosition=0 08:00:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:31 Filter is already there-color wheel unchanged 08:00:32 Received message from Master: op=Shutter serial=214811 08:00:32 Shutter LASER open 08:00:32 Received message from Camera: op=State serial=214813 08:00:32 GetSingleValue result=40 Value=cccccccc 08:00:32 SkyScan query 08:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:00:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:32 Parameters OK 08:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:32 Set A/D data flow result=40 08:00:32 Set A/D channel type result=40 08:00:32 Set A/D encoding result=40 08:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:32 Set channel filter=0.000000e+000 result=40 08:00:32 Config A/D Result=40 08:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:32 Get A/D filter: -9.255963e+061 result=40 08:00:32 Get A/D value=-858993460 result=40 08:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:32 Parameters OK 08:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:32 Set A/D data flow result=40 08:00:32 Set A/D channel type result=40 08:00:32 Set A/D encoding result=40 08:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:32 Set channel filter=0.000000e+000 result=40 08:00:32 Config A/D Result=40 08:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:32 Get A/D filter: -9.255963e+061 result=40 08:00:32 Get A/D value=-858993460 result=40 08:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:32 Aux= 08:00:32 Message to Camera, serial 214813 queued 08:00:41 Received message from Master: op=Shutter serial=214823 08:00:41 Shutter LASER close 08:00:41 Received message from Master: op=PointingHead serial=214827 08:00:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:00:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:00:42 Point started: ret=0 08:00:42 point_skyscan result=0 08:00:42 Check angles 08:00:42 SkyScan query 08:00:43 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.22<-21548 Statuses=0009 0009 08:00:43 Msec=0 True Az=135.945 Ze=-143.22 Az status=0009 Ze status=0009 08:00:43 Check angles 08:00:43 SkyScan query 08:00:44 SkyScan query done: ret=0 az=153.495<-10233 ze=-122.235<-20149 Statuses=0009 0009 08:00:44 Msec=750 True Az=153.495 Ze=-122.235 Az status=0009 Ze status=0009 08:00:44 Check angles 08:00:44 SkyScan query 08:00:45 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.845<-18723 Statuses=0009 0009 08:00:45 Msec=1500 True Az=171.405 Ze=-100.845 Az status=0009 Ze status=0009 08:00:45 Check angles 08:00:45 SkyScan query 08:00:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.935<-17329 Statuses=0008 0009 08:00:45 Msec=2250 True Az=176.01 Ze=-79.935 Az status=0008 Ze status=0009 08:00:45 Check angles 08:00:45 SkyScan query 08:00:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.44<-15896 Statuses=0008 0009 08:00:46 Msec=3000 True Az=176.01 Ze=-58.44 Az status=0008 Ze status=0009 08:00:46 Check angles 08:00:46 SkyScan query 08:00:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:00:47 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:00:47 Message to Master queued w/err=0: serial=214827 error=0 08:00:52 Received message from Master: op=Filter serial=214828 08:00:52 Color wheel filter change from 0 to 0 08:00:52 FLIGetFilterPos err=0 currentPosition=0 08:00:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:52 Filter is already there-color wheel unchanged 08:00:52 Received message from Master: op=Shutter serial=214829 08:00:52 Shutter LASER close 08:00:52 Received message from Camera: op=State serial=214831 08:00:52 GetSingleValue result=40 Value=cccccccc 08:00:52 SkyScan query 08:00:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:00:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:53 Parameters OK 08:00:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:53 Set A/D data flow result=40 08:00:53 Set A/D channel type result=40 08:00:53 Set A/D encoding result=40 08:00:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:53 Set channel filter=0.000000e+000 result=40 08:00:53 Config A/D Result=40 08:00:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:53 Get A/D filter: -9.255963e+061 result=40 08:00:53 Get A/D value=-858993460 result=40 08:00:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:53 Parameters OK 08:00:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:53 Set A/D data flow result=40 08:00:53 Set A/D channel type result=40 08:00:53 Set A/D encoding result=40 08:00:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:53 Set channel filter=0.000000e+000 result=40 08:00:53 Config A/D Result=40 08:00:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:53 Get A/D filter: -9.255963e+061 result=40 08:00:53 Get A/D value=-858993460 result=40 08:00:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:53 Aux= 08:00:53 Message to Camera, serial 214831 queued 08:01:30 Received message from Master: op=PointingHead serial=214844 08:01:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:01:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:01:30 Point started: ret=0 08:01:30 point_skyscan result=0 08:01:31 Check angles 08:01:31 SkyScan query 08:01:31 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.795<-13453 Statuses=0009 0009 08:01:31 Msec=0 True Az=152.97 Ze=-21.795 Az status=0009 Ze status=0009 08:01:31 Check angles 08:01:31 SkyScan query 08:01:32 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.75<-12050 Statuses=0009 0009 08:01:32 Msec=750 True Az=135.615 Ze=-0.75 Az status=0009 Ze status=0009 08:01:32 Check angles 08:01:32 SkyScan query 08:01:33 SkyScan query done: ret=0 az=118.035<-7869 ze=20.115<-10659 Statuses=0009 0009 08:01:33 Msec=1500 True Az=118.035 Ze=20.115 Az status=0009 Ze status=0009 08:01:33 Check angles 08:01:33 SkyScan query 08:01:33 SkyScan query done: ret=0 az=100.71<-6714 ze=41.145<-9257 Statuses=0009 0009 08:01:33 Msec=2250 True Az=100.71 Ze=41.145 Az status=0009 Ze status=0009 08:01:34 Check angles 08:01:34 SkyScan query 08:01:34 SkyScan query done: ret=0 az=85.965<-5731 ze=51.6<-8560 Statuses=0009 0008 08:01:34 Msec=3000 True Az=85.965 Ze=51.6 Az status=0009 Ze status=0008 08:01:34 Check angles 08:01:34 SkyScan query 08:01:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:01:35 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:01:35 Message to Master queued w/err=0: serial=214844 error=0 08:01:40 Received message from Master: op=Filter serial=214845 08:01:40 Color wheel filter change from 0 to 0 08:01:40 FLIGetFilterPos err=0 currentPosition=0 08:01:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:40 Filter is already there-color wheel unchanged 08:01:40 Received message from Master: op=Shutter serial=214846 08:01:40 Shutter LASER close 08:01:40 Received message from Camera: op=State serial=214848 08:01:40 GetSingleValue result=40 Value=cccccccc 08:01:40 SkyScan query 08:01:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:01:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:41 Parameters OK 08:01:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:41 Set A/D data flow result=40 08:01:41 Set A/D channel type result=40 08:01:41 Set A/D encoding result=40 08:01:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:41 Set channel filter=0.000000e+000 result=40 08:01:41 Config A/D Result=40 08:01:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:41 Get A/D filter: -9.255963e+061 result=40 08:01:41 Get A/D value=-858993460 result=40 08:01:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:41 Parameters OK 08:01:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:41 Set A/D data flow result=40 08:01:41 Set A/D channel type result=40 08:01:41 Set A/D encoding result=40 08:01:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:41 Set channel filter=0.000000e+000 result=40 08:01:41 Config A/D Result=40 08:01:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:41 Get A/D filter: -9.255963e+061 result=40 08:01:41 Get A/D value=-858993460 result=40 08:01:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:41 Aux= 08:01:41 Message to Camera, serial 214848 queued 08:02:18 Received message from Master: op=PointingHead serial=214861 08:02:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:02:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:02:18 Point started: ret=0 08:02:18 point_skyscan result=0 08:02:19 Check angles 08:02:19 SkyScan query 08:02:19 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 08:02:19 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 08:02:19 Check angles 08:02:19 SkyScan query 08:02:20 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 08:02:20 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 08:02:20 Check angles 08:02:20 SkyScan query 08:02:21 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 08:02:21 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 08:02:21 Check angles 08:02:21 SkyScan query 08:02:22 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 08:02:22 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 08:02:22 Check angles 08:02:22 SkyScan query 08:02:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:02:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:02:22 Check angles 08:02:22 SkyScan query 08:02:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:02:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:02:23 Message to Master queued w/err=0: serial=214861 error=0 08:02:28 Received message from Master: op=Filter serial=214862 08:02:28 Color wheel filter change from 0 to 0 08:02:28 FLIGetFilterPos err=0 currentPosition=0 08:02:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:28 Filter is already there-color wheel unchanged 08:02:28 Received message from Master: op=Shutter serial=214863 08:02:28 Shutter LASER close 08:02:28 Received message from Camera: op=State serial=214865 08:02:28 GetSingleValue result=40 Value=cccccccc 08:02:28 SkyScan query 08:02:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:02:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:29 Parameters OK 08:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:29 Set A/D data flow result=40 08:02:29 Set A/D channel type result=40 08:02:29 Set A/D encoding result=40 08:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:29 Set channel filter=0.000000e+000 result=40 08:02:29 Config A/D Result=40 08:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:29 Get A/D filter: -9.255963e+061 result=40 08:02:29 Get A/D value=-858993460 result=40 08:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:29 Parameters OK 08:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:29 Set A/D data flow result=40 08:02:29 Set A/D channel type result=40 08:02:29 Set A/D encoding result=40 08:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:29 Set channel filter=0.000000e+000 result=40 08:02:29 Config A/D Result=40 08:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:29 Get A/D filter: -9.255963e+061 result=40 08:02:29 Get A/D value=-858993460 result=40 08:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:29 Aux= 08:02:29 Message to Camera, serial 214865 queued 08:03:06 Received message from Master: op=PointingHead serial=214878 08:03:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:03:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:03:06 Point started: ret=0 08:03:06 point_skyscan result=0 08:03:07 Check angles 08:03:07 SkyScan query 08:03:07 SkyScan query done: ret=0 az=152.76<-10184 ze=8.625<-11425 Statuses=0009 0009 08:03:07 Msec=0 True Az=152.76 Ze=8.625 Az status=0009 Ze status=0009 08:03:08 Check angles 08:03:08 SkyScan query 08:03:08 SkyScan query done: ret=0 az=134.97<-8998 ze=-12.69<-12846 Statuses=0009 0009 08:03:08 Msec=750 True Az=134.97 Ze=-12.69 Az status=0009 Ze status=0009 08:03:08 Check angles 08:03:08 SkyScan query 08:03:09 SkyScan query done: ret=0 az=117.18<-7812 ze=-34.155<-14277 Statuses=0009 0009 08:03:09 Msec=1500 True Az=117.18 Ze=-34.155 Az status=0009 Ze status=0009 08:03:09 Check angles 08:03:09 SkyScan query 08:03:10 SkyScan query done: ret=0 az=99.72<-6648 ze=-51.57<-15438 Statuses=0009 0009 08:03:10 Msec=2250 True Az=99.72 Ze=-51.57 Az status=0009 Ze status=0009 08:03:10 Check angles 08:03:10 SkyScan query 08:03:10 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:03:10 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:03:11 Check angles 08:03:11 SkyScan query 08:03:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:03:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:03:11 Message to Master queued w/err=0: serial=214878 error=0 08:03:16 Received message from Master: op=Filter serial=214879 08:03:16 Color wheel filter change from 0 to 0 08:03:16 FLIGetFilterPos err=0 currentPosition=0 08:03:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:16 Filter is already there-color wheel unchanged 08:03:16 Received message from Master: op=Shutter serial=214880 08:03:16 Shutter LASER close 08:03:16 Received message from Camera: op=State serial=214882 08:03:16 GetSingleValue result=40 Value=cccccccc 08:03:16 SkyScan query 08:03:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:03:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:17 Parameters OK 08:03:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:17 Set A/D data flow result=40 08:03:17 Set A/D channel type result=40 08:03:17 Set A/D encoding result=40 08:03:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:17 Set channel filter=0.000000e+000 result=40 08:03:17 Config A/D Result=40 08:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:17 Get A/D filter: -9.255963e+061 result=40 08:03:17 Get A/D value=-858993460 result=40 08:03:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:17 Parameters OK 08:03:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:17 Set A/D data flow result=40 08:03:17 Set A/D channel type result=40 08:03:17 Set A/D encoding result=40 08:03:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:17 Set channel filter=0.000000e+000 result=40 08:03:17 Config A/D Result=40 08:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:17 Get A/D filter: -9.255963e+061 result=40 08:03:17 Get A/D value=-858993460 result=40 08:03:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:17 Aux= 08:03:17 Message to Camera, serial 214882 queued 08:03:54 Received message from Master: op=PointingHead serial=214895 08:03:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:03:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:03:54 Point started: ret=0 08:03:54 point_skyscan result=0 08:03:55 Check angles 08:03:55 SkyScan query 08:03:55 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.345<-17423 Statuses=0009 0009 08:03:55 Msec=0 True Az=109.14 Ze=-81.345 Az status=0009 Ze status=0009 08:03:56 Check angles 08:03:56 SkyScan query 08:03:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 08:03:56 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 08:03:56 Check angles 08:03:56 SkyScan query 08:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 08:03:57 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 08:03:57 Check angles 08:03:57 SkyScan query 08:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.585<-21639 Statuses=0008 0009 08:03:58 Msec=2250 True Az=112.995 Ze=-144.585 Az status=0008 Ze status=0009 08:03:58 Check angles 08:03:58 SkyScan query 08:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 08:03:59 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 08:03:59 Check angles 08:03:59 SkyScan query 08:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:03:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:03:59 Message to Master queued w/err=0: serial=214895 error=0 08:04:04 Received message from Master: op=Filter serial=214896 08:04:04 Color wheel filter change from 0 to 0 08:04:04 FLIGetFilterPos err=0 currentPosition=0 08:04:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:04 Filter is already there-color wheel unchanged 08:04:04 Received message from Master: op=Shutter serial=214897 08:04:04 Shutter LASER open 08:04:05 Received message from Camera: op=State serial=214899 08:04:05 GetSingleValue result=40 Value=cccccccc 08:04:05 SkyScan query 08:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:04:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:05 Parameters OK 08:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:05 Set A/D data flow result=40 08:04:05 Set A/D channel type result=40 08:04:05 Set A/D encoding result=40 08:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:05 Set channel filter=0.000000e+000 result=40 08:04:05 Config A/D Result=40 08:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:05 Get A/D filter: -9.255963e+061 result=40 08:04:05 Get A/D value=-858993460 result=40 08:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:05 Parameters OK 08:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:05 Set A/D data flow result=40 08:04:05 Set A/D channel type result=40 08:04:05 Set A/D encoding result=40 08:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:05 Set channel filter=0.000000e+000 result=40 08:04:05 Config A/D Result=40 08:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:05 Get A/D filter: -9.255963e+061 result=40 08:04:05 Get A/D value=-858993460 result=40 08:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:05 Aux= 08:04:05 Message to Camera, serial 214899 queued 08:04:14 Received message from Master: op=Shutter serial=214909 08:04:14 Shutter LASER close 08:04:14 Received message from Master: op=PointingHead serial=214913 08:04:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:04:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:04:14 Point started: ret=0 08:04:14 point_skyscan result=0 08:04:15 Check angles 08:04:15 SkyScan query 08:04:16 SkyScan query done: ret=0 az=89.88<-5992 ze=157.2<-1520 Statuses=0009 0009 08:04:16 Msec=0 True Az=89.88 Ze=157.2 Az status=0009 Ze status=0009 08:04:16 Check angles 08:04:16 SkyScan query 08:04:16 SkyScan query done: ret=0 az=72.315<-4821 ze=136.245<-2917 Statuses=0009 0009 08:04:16 Msec=750 True Az=72.315 Ze=136.245 Az status=0009 Ze status=0009 08:04:17 Check angles 08:04:17 SkyScan query 08:04:17 SkyScan query done: ret=0 az=54.75<-3650 ze=114.855<-4343 Statuses=0009 0009 08:04:17 Msec=1500 True Az=54.75 Ze=114.855 Az status=0009 Ze status=0009 08:04:17 Check angles 08:04:17 SkyScan query 08:04:18 SkyScan query done: ret=0 az=40.965<-2731 ze=93.93<-5738 Statuses=0009 0009 08:04:18 Msec=2250 True Az=40.965 Ze=93.93 Az status=0009 Ze status=0009 08:04:18 Check angles 08:04:18 SkyScan query 08:04:19 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 08:04:19 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 08:04:19 Check angles 08:04:19 SkyScan query 08:04:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 08:04:20 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 08:04:20 Check angles 08:04:20 SkyScan query 08:04:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:04:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:04:20 Message to Master queued w/err=0: serial=214913 error=0 08:04:25 Received message from Master: op=Filter serial=214914 08:04:25 Color wheel filter change from 0 to 0 08:04:25 FLIGetFilterPos err=0 currentPosition=0 08:04:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:25 Filter is already there-color wheel unchanged 08:04:25 Received message from Master: op=Shutter serial=214915 08:04:25 Shutter LASER close 08:04:26 Received message from Camera: op=State serial=214917 08:04:26 GetSingleValue result=40 Value=cccccccc 08:04:26 SkyScan query 08:04:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:04:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:26 Parameters OK 08:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:26 Set A/D data flow result=40 08:04:26 Set A/D channel type result=40 08:04:26 Set A/D encoding result=40 08:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:26 Set channel filter=0.000000e+000 result=40 08:04:26 Config A/D Result=40 08:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:26 Get A/D filter: -9.255963e+061 result=40 08:04:26 Get A/D value=-858993460 result=40 08:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:26 Parameters OK 08:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:26 Set A/D data flow result=40 08:04:26 Set A/D channel type result=40 08:04:26 Set A/D encoding result=40 08:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:26 Set channel filter=0.000000e+000 result=40 08:04:26 Config A/D Result=40 08:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:26 Get A/D filter: -9.255963e+061 result=40 08:04:26 Get A/D value=-858993460 result=40 08:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:26 Aux= 08:04:26 Message to Camera, serial 214917 queued 08:05:03 Received message from Master: op=PointingHead serial=214930 08:05:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:05:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:05:03 Point started: ret=0 08:05:03 point_skyscan result=0 08:05:04 Check angles 08:05:04 SkyScan query 08:05:05 SkyScan query done: ret=0 az=64.2<-4280 ze=66.51<-7566 Statuses=0009 0008 08:05:05 Msec=0 True Az=64.2 Ze=66.51 Az status=0009 Ze status=0008 08:05:05 Check angles 08:05:05 SkyScan query 08:05:05 SkyScan query done: ret=0 az=81.6<-5440 ze=66.51<-7566 Statuses=0009 0008 08:05:05 Msec=750 True Az=81.6 Ze=66.51 Az status=0009 Ze status=0008 08:05:06 Check angles 08:05:06 SkyScan query 08:05:06 SkyScan query done: ret=0 az=99.615<-6641 ze=66.495<-7567 Statuses=0009 0008 08:05:06 Msec=1500 True Az=99.615 Ze=66.495 Az status=0009 Ze status=0008 08:05:06 Check angles 08:05:06 SkyScan query 08:05:07 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 08:05:07 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 08:05:07 Check angles 08:05:07 SkyScan query 08:05:08 SkyScan query done: ret=0 az=134.535<-8969 ze=66.495<-7567 Statuses=0009 0008 08:05:08 Msec=3000 True Az=134.535 Ze=66.495 Az status=0009 Ze status=0008 08:05:08 Check angles 08:05:08 SkyScan query 08:05:08 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 08:05:08 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 08:05:09 Check angles 08:05:09 SkyScan query 08:05:09 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:05:09 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:05:09 Message to Master queued w/err=0: serial=214930 error=0 08:05:14 Received message from Master: op=Filter serial=214931 08:05:14 Color wheel filter change from 0 to 0 08:05:14 FLIGetFilterPos err=0 currentPosition=0 08:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:14 Filter is already there-color wheel unchanged 08:05:14 Received message from Master: op=Shutter serial=214932 08:05:14 Shutter LASER close 08:05:14 Received message from Camera: op=State serial=214934 08:05:14 GetSingleValue result=40 Value=cccccccc 08:05:14 SkyScan query 08:05:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:15 Parameters OK 08:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:15 Set A/D data flow result=40 08:05:15 Set A/D channel type result=40 08:05:15 Set A/D encoding result=40 08:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:15 Set channel filter=0.000000e+000 result=40 08:05:15 Config A/D Result=40 08:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:15 Get A/D filter: -9.255963e+061 result=40 08:05:15 Get A/D value=-858993460 result=40 08:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:15 Parameters OK 08:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:15 Set A/D data flow result=40 08:05:15 Set A/D channel type result=40 08:05:15 Set A/D encoding result=40 08:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:15 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-17 08:05:15] 08:05:15 Config A/D Result=40 08:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:15 Get A/D filter: -9.255963e+061 result=40 08:05:15 Get A/D value=-858993460 result=40 08:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:15 Aux= 08:05:15 Message to Camera, serial 214934 queued 08:05:52 Received message from Master: op=PointingHead serial=214947 08:05:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:05:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:05:52 Point started: ret=0 08:05:52 point_skyscan result=0 08:05:53 Check angles 08:05:53 SkyScan query 08:05:54 SkyScan query done: ret=0 az=134.985<-8999 ze=96.33<-5578 Statuses=0009 0009 08:05:54 Msec=0 True Az=134.985 Ze=96.33 Az status=0009 Ze status=0009 08:05:54 Check angles 08:05:54 SkyScan query 08:05:54 SkyScan query done: ret=0 az=130.995<-8733 ze=117.3<-4180 Statuses=0008 0009 08:05:54 Msec=750 True Az=130.995 Ze=117.3 Az status=0008 Ze status=0009 08:05:55 Check angles 08:05:55 SkyScan query 08:05:55 SkyScan query done: ret=0 az=130.98<-8732 ze=138.195<-2787 Statuses=0008 0009 08:05:55 Msec=1500 True Az=130.98 Ze=138.195 Az status=0008 Ze status=0009 08:05:55 Check angles 08:05:55 SkyScan query 08:05:56 SkyScan query done: ret=0 az=130.995<-8733 ze=159.615<-1359 Statuses=0008 0009 08:05:56 Msec=2250 True Az=130.995 Ze=159.615 Az status=0008 Ze status=0009 08:05:56 Check angles 08:05:56 SkyScan query 08:05:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.98<-23932 Statuses=0008 0009 08:05:57 Msec=3000 True Az=130.995 Ze=-178.98 Az status=0008 Ze status=0009 08:05:57 Check angles 08:05:57 SkyScan query 08:05:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.04<-22536 Statuses=0008 0009 08:05:57 Msec=3750 True Az=130.995 Ze=-158.04 Az status=0008 Ze status=0009 08:05:58 Check angles 08:05:58 SkyScan query 08:05:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 08:05:58 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 08:05:58 Check angles 08:05:58 SkyScan query 08:05:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:05:59 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:05:59 Message to Master queued w/err=0: serial=214947 error=0 08:06:04 Received message from Master: op=Filter serial=214948 08:06:04 Color wheel filter change from 0 to 0 08:06:04 FLIGetFilterPos err=0 currentPosition=0 08:06:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:04 Filter is already there-color wheel unchanged 08:06:04 Received message from Master: op=Shutter serial=214949 08:06:04 Shutter LASER close 08:06:04 Received message from Camera: op=State serial=214951 08:06:04 GetSingleValue result=40 Value=cccccccc 08:06:04 SkyScan query 08:06:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:06:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:05 Parameters OK 08:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:05 Set A/D data flow result=40 08:06:05 Set A/D channel type result=40 08:06:05 Set A/D encoding result=40 08:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:05 Set channel filter=0.000000e+000 result=40 08:06:05 Config A/D Result=40 08:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:05 Get A/D filter: -9.255963e+061 result=40 08:06:05 Get A/D value=-858993460 result=40 08:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:05 Parameters OK 08:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:05 Set A/D data flow result=40 08:06:05 Set A/D channel type result=40 08:06:05 Set A/D encoding result=40 08:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:05 Set channel filter=0.000000e+000 result=40 08:06:05 Config A/D Result=40 08:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:05 Get A/D filter: -9.255963e+061 result=40 08:06:05 Get A/D value=-858993460 result=40 08:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:05 Aux= 08:06:05 Message to Camera, serial 214951 queued 08:06:42 Received message from Master: op=PointingHead serial=214964 08:06:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:06:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:06:42 Point started: ret=0 08:06:42 point_skyscan result=0 08:06:43 Check angles 08:06:43 SkyScan query 08:06:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 08:06:43 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 08:06:43 Check angles 08:06:43 SkyScan query 08:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:06:44 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:06:44 Message to Master queued w/err=0: serial=214964 error=0 08:06:49 Received message from Master: op=Filter serial=214965 08:06:49 Color wheel filter change from 0 to 0 08:06:49 FLIGetFilterPos err=0 currentPosition=0 08:06:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:49 Filter is already there-color wheel unchanged 08:06:49 Received message from Master: op=Shutter serial=214966 08:06:49 Shutter LASER open 08:06:49 Received message from Camera: op=State serial=214968 08:06:49 GetSingleValue result=40 Value=cccccccc 08:06:49 SkyScan query 08:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:06:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:50 Parameters OK 08:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:50 Set A/D data flow result=40 08:06:50 Set A/D channel type result=40 08:06:50 Set A/D encoding result=40 08:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:50 Set channel filter=0.000000e+000 result=40 08:06:50 Config A/D Result=40 08:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:50 Get A/D filter: -9.255963e+061 result=40 08:06:50 Get A/D value=-858993460 result=40 08:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:50 Parameters OK 08:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:50 Set A/D data flow result=40 08:06:50 Set A/D channel type result=40 08:06:50 Set A/D encoding result=40 08:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:50 Set channel filter=0.000000e+000 result=40 08:06:50 Config A/D Result=40 08:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:50 Get A/D filter: -9.255963e+061 result=40 08:06:50 Get A/D value=-858993460 result=40 08:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:50 Aux= 08:06:50 Message to Camera, serial 214968 queued 08:06:58 Received message from Master: op=Shutter serial=214978 08:06:58 Shutter LASER close 08:06:59 Received message from Master: op=PointingHead serial=214982 08:06:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:06:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:06:59 Point started: ret=0 08:06:59 point_skyscan result=0 08:07:00 Check angles 08:07:00 SkyScan query 08:07:01 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.52<-21568 Statuses=0009 0009 08:07:01 Msec=0 True Az=135.72 Ze=-143.52 Az status=0009 Ze status=0009 08:07:01 Check angles 08:07:01 SkyScan query 08:07:01 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.1<-20140 Statuses=0009 0009 08:07:01 Msec=750 True Az=153.63 Ze=-122.1 Az status=0009 Ze status=0009 08:07:02 Check angles 08:07:02 SkyScan query 08:07:02 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.22<-18748 Statuses=0009 0009 08:07:02 Msec=1500 True Az=171.21 Ze=-101.22 Az status=0009 Ze status=0009 08:07:02 Check angles 08:07:02 SkyScan query 08:07:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.25<-17350 Statuses=0008 0009 08:07:03 Msec=2250 True Az=175.995 Ze=-80.25 Az status=0008 Ze status=0009 08:07:03 Check angles 08:07:03 SkyScan query 08:07:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.31<-15954 Statuses=0008 0009 08:07:04 Msec=3000 True Az=175.995 Ze=-59.31 Az status=0008 Ze status=0009 08:07:04 Check angles 08:07:04 SkyScan query 08:07:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:07:04 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:07:04 Message to Master queued w/err=0: serial=214982 error=0 08:07:09 Received message from Master: op=Filter serial=214983 08:07:09 Color wheel filter change from 0 to 0 08:07:09 FLIGetFilterPos err=0 currentPosition=0 08:07:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:09 Filter is already there-color wheel unchanged 08:07:10 Received message from Master: op=Shutter serial=214984 08:07:10 Shutter LASER close 08:07:10 Received message from Camera: op=State serial=214986 08:07:10 GetSingleValue result=40 Value=cccccccc 08:07:10 SkyScan query 08:07:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:07:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:10 Parameters OK 08:07:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:10 Set A/D data flow result=40 08:07:10 Set A/D channel type result=40 08:07:10 Set A/D encoding result=40 08:07:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:10 Set channel filter=0.000000e+000 result=40 08:07:10 Config A/D Result=40 08:07:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:10 Get A/D filter: -9.255963e+061 result=40 08:07:10 Get A/D value=-858993460 result=40 08:07:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:10 Parameters OK 08:07:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:10 Set A/D data flow result=40 08:07:10 Set A/D channel type result=40 08:07:10 Set A/D encoding result=40 08:07:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:10 Set channel filter=0.000000e+000 result=40 08:07:10 Config A/D Result=40 08:07:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:10 Get A/D filter: -9.255963e+061 result=40 08:07:10 Get A/D value=-858993460 result=40 08:07:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:10 Aux= 08:07:10 Message to Camera, serial 214986 queued 08:07:47 Received message from Master: op=PointingHead serial=214999 08:07:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:07:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:07:47 Point started: ret=0 08:07:47 point_skyscan result=0 08:07:48 Check angles 08:07:48 SkyScan query 08:07:49 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.96<-13464 Statuses=0009 0009 08:07:49 Msec=0 True Az=153.09 Ze=-21.96 Az status=0009 Ze status=0009 08:07:49 Check angles 08:07:49 SkyScan query 08:07:50 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.93<-12062 Statuses=0009 0009 08:07:50 Msec=750 True Az=135.75 Ze=-0.93 Az status=0009 Ze status=0009 08:07:50 Check angles 08:07:50 SkyScan query 08:07:50 SkyScan query done: ret=0 az=118.17<-7878 ze=19.965<-10669 Statuses=0009 0009 08:07:50 Msec=1500 True Az=118.17 Ze=19.965 Az status=0009 Ze status=0009 08:07:50 Check angles 08:07:50 SkyScan query 08:07:51 SkyScan query done: ret=0 az=100.41<-6694 ze=41.52<-9232 Statuses=0009 0009 08:07:51 Msec=2250 True Az=100.41 Ze=41.52 Az status=0009 Ze status=0009 08:07:51 Check angles 08:07:51 SkyScan query 08:07:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.585<-8561 Statuses=0009 0008 08:07:52 Msec=3000 True Az=85.995 Ze=51.585 Az status=0009 Ze status=0008 08:07:52 Check angles 08:07:52 SkyScan query 08:07:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:07:53 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:07:53 Message to Master queued w/err=0: serial=214999 error=0 08:07:58 Received message from Master: op=Filter serial=215000 08:07:58 Color wheel filter change from 0 to 0 08:07:58 FLIGetFilterPos err=0 currentPosition=0 08:07:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:58 Filter is already there-color wheel unchanged 08:07:58 Received message from Master: op=Shutter serial=215001 08:07:58 Shutter LASER close 08:07:58 Received message from Camera: op=State serial=215003 08:07:58 GetSingleValue result=40 Value=cccccccc 08:07:58 SkyScan query 08:07:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:07:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:58 Parameters OK 08:07:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:58 Set A/D data flow result=40 08:07:58 Set A/D channel type result=40 08:07:58 Set A/D encoding result=40 08:07:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:58 Set channel filter=0.000000e+000 result=40 08:07:58 Config A/D Result=40 08:07:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:58 Get A/D filter: -9.255963e+061 result=40 08:07:58 Get A/D value=-858993460 result=40 08:07:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:58 Parameters OK 08:07:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:58 Set A/D data flow result=40 08:07:58 Set A/D channel type result=40 08:07:58 Set A/D encoding result=40 08:07:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:58 Set channel filter=0.000000e+000 result=40 08:07:58 Config A/D Result=40 08:07:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:58 Get A/D filter: -9.255963e+061 result=40 08:07:58 Get A/D value=-858993460 result=40 08:07:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:58 Aux= 08:07:58 Message to Camera, serial 215003 queued 08:08:34 Received message from Master: op=PointingHead serial=215015 08:08:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:08:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:08:35 Point started: ret=0 08:08:35 point_skyscan result=0 08:08:35 Check angles 08:08:35 SkyScan query 08:08:36 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 08:08:36 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 08:08:36 Check angles 08:08:36 SkyScan query 08:08:37 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 08:08:37 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 08:08:37 Check angles 08:08:37 SkyScan query 08:08:37 SkyScan query done: ret=0 az=144.54<-9636 ze=38.505<-9433 Statuses=0009 0008 08:08:37 Msec=1500 True Az=144.54 Ze=38.505 Az status=0009 Ze status=0008 08:08:38 Check angles 08:08:38 SkyScan query 08:08:38 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 08:08:38 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 08:08:38 Check angles 08:08:38 SkyScan query 08:08:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 08:08:39 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 08:08:39 Check angles 08:08:39 SkyScan query 08:08:40 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:08:40 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:08:40 Message to Master queued w/err=0: serial=215015 error=0 08:08:45 Received message from Master: op=Filter serial=215016 08:08:45 Color wheel filter change from 0 to 0 08:08:45 FLIGetFilterPos err=0 currentPosition=0 08:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:45 Filter is already there-color wheel unchanged 08:08:45 Received message from Master: op=Shutter serial=215017 08:08:45 Shutter LASER close 08:08:45 Received message from Camera: op=State serial=215019 08:08:45 GetSingleValue result=40 Value=cccccccc 08:08:45 SkyScan query 08:08:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:08:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:46 Parameters OK 08:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:46 Set A/D data flow result=40 08:08:46 Set A/D channel type result=40 08:08:46 Set A/D encoding result=40 08:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:46 Set channel filter=0.000000e+000 result=40 08:08:46 Config A/D Result=40 08:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:46 Get A/D filter: -9.255963e+061 result=40 08:08:46 Get A/D value=-858993460 result=40 08:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:46 Parameters OK 08:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:46 Set A/D data flow result=40 08:08:46 Set A/D channel type result=40 08:08:46 Set A/D encoding result=40 08:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:46 Set channel filter=0.000000e+000 result=40 08:08:46 Config A/D Result=40 08:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:46 Get A/D filter: -9.255963e+061 result=40 08:08:46 Get A/D value=-858993460 result=40 08:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:46 Aux= 08:08:46 Message to Camera, serial 215019 queued 08:09:22 Received message from Master: op=PointingHead serial=215032 08:09:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:09:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:09:23 Point started: ret=0 08:09:23 point_skyscan result=0 08:09:23 Check angles 08:09:23 SkyScan query 08:09:24 SkyScan query done: ret=0 az=152.76<-10184 ze=8.415<-11439 Statuses=0009 0009 08:09:24 Msec=0 True Az=152.76 Ze=8.415 Az status=0009 Ze status=0009 08:09:24 Check angles 08:09:24 SkyScan query 08:09:25 SkyScan query done: ret=0 az=134.955<-8997 ze=-12.915<-12861 Statuses=0009 0009 08:09:25 Msec=750 True Az=134.955 Ze=-12.915 Az status=0009 Ze status=0009 08:09:25 Check angles 08:09:25 SkyScan query 08:09:26 SkyScan query done: ret=0 az=117.48<-7832 ze=-33.93<-14262 Statuses=0009 0009 08:09:26 Msec=1500 True Az=117.48 Ze=-33.93 Az status=0009 Ze status=0009 08:09:26 Check angles 08:09:26 SkyScan query 08:09:26 SkyScan query done: ret=0 az=100.095<-6673 ze=-51.555<-15437 Statuses=0009 0009 08:09:26 Msec=2250 True Az=100.095 Ze=-51.555 Az status=0009 Ze status=0009 08:09:26 Check angles 08:09:26 SkyScan query 08:09:27 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:09:27 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:09:27 Check angles 08:09:27 SkyScan query 08:09:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:09:28 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:09:28 Message to Master queued w/err=0: serial=215032 error=0 08:09:33 Received message from Master: op=Filter serial=215033 08:09:33 Color wheel filter change from 0 to 0 08:09:33 FLIGetFilterPos err=0 currentPosition=0 08:09:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:33 Filter is already there-color wheel unchanged 08:09:33 Received message from Master: op=Shutter serial=215034 08:09:33 Shutter LASER close 08:09:33 Received message from Camera: op=State serial=215036 08:09:33 GetSingleValue result=40 Value=cccccccc 08:09:33 SkyScan query 08:09:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:09:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:34 Parameters OK 08:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:34 Set A/D data flow result=40 08:09:34 Set A/D channel type result=40 08:09:34 Set A/D encoding result=40 08:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:34 Set channel filter=0.000000e+000 result=40 08:09:34 Config A/D Result=40 08:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:34 Get A/D filter: -9.255963e+061 result=40 08:09:34 Get A/D value=-858993460 result=40 08:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:34 Parameters OK 08:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:34 Set A/D data flow result=40 08:09:34 Set A/D channel type result=40 08:09:34 Set A/D encoding result=40 08:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:34 Set channel filter=0.000000e+000 result=40 08:09:34 Config A/D Result=40 08:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:34 Get A/D filter: -9.255963e+061 result=40 08:09:34 Get A/D value=-858993460 result=40 08:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:34 Aux= 08:09:34 Message to Camera, serial 215036 queued 08:10:10 Received message from Master: op=PointingHead serial=215049 08:10:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:10:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:10:11 Point started: ret=0 08:10:11 point_skyscan result=0 08:10:12 Check angles 08:10:12 SkyScan query 08:10:12 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.345<-17423 Statuses=0009 0009 08:10:12 Msec=0 True Az=109.02 Ze=-81.345 Az status=0009 Ze status=0009 08:10:12 Check angles 08:10:12 SkyScan query 08:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 08:10:13 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 08:10:13 Check angles 08:10:13 SkyScan query 08:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 08:10:14 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 08:10:14 Check angles 08:10:14 SkyScan query 08:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 08:10:14 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 08:10:15 Check angles 08:10:15 SkyScan query 08:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 08:10:15 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 08:10:15 Check angles 08:10:15 SkyScan query 08:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:10:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:10:16 Message to Master queued w/err=0: serial=215049 error=0 08:10:21 Received message from Master: op=Filter serial=215050 08:10:21 Color wheel filter change from 0 to 0 08:10:21 FLIGetFilterPos err=0 currentPosition=0 08:10:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:21 Filter is already there-color wheel unchanged 08:10:21 Received message from Master: op=Shutter serial=215051 08:10:21 Shutter LASER open 08:10:21 Received message from Camera: op=State serial=215053 08:10:21 GetSingleValue result=40 Value=cccccccc 08:10:21 SkyScan query 08:10:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:10:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:22 Parameters OK 08:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:22 Set A/D data flow result=40 08:10:22 Set A/D channel type result=40 08:10:22 Set A/D encoding result=40 08:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:22 Set channel filter=0.000000e+000 result=40 08:10:22 Config A/D Result=40 08:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:22 Get A/D filter: -9.255963e+061 result=40 08:10:22 Get A/D value=-858993460 result=40 08:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:22 Parameters OK 08:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:22 Set A/D data flow result=40 08:10:22 Set A/D channel type result=40 08:10:22 Set A/D encoding result=40 08:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:22 Set channel filter=0.000000e+000 result=40 08:10:22 Config A/D Result=40 08:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:22 Get A/D filter: -9.255963e+061 result=40 08:10:22 Get A/D value=-858993460 result=40 08:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:22 Aux= 08:10:22 Message to Camera, serial 215053 queued 08:10:30 Received message from Master: op=Shutter serial=215063 08:10:30 Shutter LASER close 08:10:31 Received message from Master: op=PointingHead serial=215067 08:10:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:10:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:10:31 Point started: ret=0 08:10:31 point_skyscan result=0 08:10:32 Check angles 08:10:32 SkyScan query 08:10:32 SkyScan query done: ret=0 az=89.835<-5989 ze=157.275<-1515 Statuses=0009 0009 08:10:32 Msec=0 True Az=89.835 Ze=157.275 Az status=0009 Ze status=0009 08:10:33 Check angles 08:10:33 SkyScan query 08:10:33 SkyScan query done: ret=0 az=71.94<-4796 ze=135.825<-2945 Statuses=0009 0009 08:10:33 Msec=750 True Az=71.94 Ze=135.825 Az status=0009 Ze status=0009 08:10:33 Check angles 08:10:33 SkyScan query 08:10:34 SkyScan query done: ret=0 az=54.705<-3647 ze=114.915<-4339 Statuses=0009 0009 08:10:34 Msec=1500 True Az=54.705 Ze=114.915 Az status=0009 Ze status=0009 08:10:34 Check angles 08:10:34 SkyScan query 08:10:35 SkyScan query done: ret=0 az=40.935<-2729 ze=93.975<-5735 Statuses=0009 0009 08:10:35 Msec=2250 True Az=40.935 Ze=93.975 Az status=0009 Ze status=0009 08:10:35 Check angles 08:10:35 SkyScan query 08:10:35 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 08:10:35 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 08:10:36 Check angles 08:10:36 SkyScan query 08:10:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 08:10:36 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 08:10:36 Check angles 08:10:36 SkyScan query 08:10:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:10:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:10:37 Message to Master queued w/err=0: serial=215067 error=0 08:10:42 Received message from Master: op=Filter serial=215068 08:10:42 Color wheel filter change from 0 to 0 08:10:42 FLIGetFilterPos err=0 currentPosition=0 08:10:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:42 Filter is already there-color wheel unchanged 08:10:42 Received message from Master: op=Shutter serial=215069 08:10:42 Shutter LASER close 08:10:42 Received message from Camera: op=State serial=215071 08:10:42 GetSingleValue result=40 Value=cccccccc 08:10:42 SkyScan query 08:10:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:10:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:43 Parameters OK 08:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:43 Set A/D data flow result=40 08:10:43 Set A/D channel type result=40 08:10:43 Set A/D encoding result=40 08:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:43 Set channel filter=0.000000e+000 result=40 08:10:43 Config A/D Result=40 08:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:43 Get A/D filter: -9.255963e+061 result=40 08:10:43 Get A/D value=-858993460 result=40 08:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:43 Parameters OK 08:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:43 Set A/D data flow result=40 08:10:43 Set A/D channel type result=40 08:10:43 Set A/D encoding result=40 08:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:43 Set channel filter=0.000000e+000 result=40 08:10:43 Config A/D Result=40 08:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:43 Get A/D filter: -9.255963e+061 result=40 08:10:43 Get A/D value=-858993460 result=40 08:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:43 Aux= 08:10:43 Message to Camera, serial 215071 queued 08:11:20 Received message from Master: op=PointingHead serial=215084 08:11:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:11:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:11:20 Point started: ret=0 08:11:20 point_skyscan result=0 08:11:21 Check angles 08:11:21 SkyScan query 08:11:21 SkyScan query done: ret=0 az=64.185<-4279 ze=66.51<-7566 Statuses=0009 0008 08:11:21 Msec=0 True Az=64.185 Ze=66.51 Az status=0009 Ze status=0008 08:11:21 Check angles 08:11:21 SkyScan query 08:11:22 SkyScan query done: ret=0 az=81.63<-5442 ze=66.51<-7566 Statuses=0009 0008 08:11:22 Msec=750 True Az=81.63 Ze=66.51 Az status=0009 Ze status=0008 08:11:22 Check angles 08:11:22 SkyScan query 08:11:23 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 08:11:23 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 08:11:23 Check angles 08:11:23 SkyScan query 08:11:24 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 08:11:24 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 08:11:24 Check angles 08:11:24 SkyScan query 08:11:24 SkyScan query done: ret=0 az=134.07<-8938 ze=66.495<-7567 Statuses=0009 0008 08:11:24 Msec=3000 True Az=134.07 Ze=66.495 Az status=0009 Ze status=0008 08:11:24 Check angles 08:11:24 SkyScan query 08:11:25 SkyScan query done: ret=0 az=151.44<-10096 ze=66.495<-7567 Statuses=0009 0008 08:11:25 Msec=3750 True Az=151.44 Ze=66.495 Az status=0009 Ze status=0008 08:11:25 Check angles 08:11:25 SkyScan query 08:11:26 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:11:26 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:11:26 Message to Master queued w/err=0: serial=215084 error=0 08:11:31 Received message from Master: op=Filter serial=215085 08:11:31 Color wheel filter change from 0 to 0 08:11:31 FLIGetFilterPos err=0 currentPosition=0 08:11:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:31 Filter is already there-color wheel unchanged 08:11:31 Received message from Master: op=Shutter serial=215086 08:11:31 Shutter LASER close 08:11:31 Received message from Camera: op=State serial=215088 08:11:31 GetSingleValue result=40 Value=cccccccc 08:11:31 SkyScan query 08:11:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:11:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:32 Parameters OK 08:11:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:32 Set A/D data flow result=40 08:11:32 Set A/D channel type result=40 08:11:32 Set A/D encoding result=40 08:11:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:32 Set channel filter=0.000000e+000 result=40 08:11:32 Config A/D Result=40 08:11:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:32 Get A/D filter: -9.255963e+061 result=40 08:11:32 Get A/D value=-858993460 result=40 08:11:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:32 Parameters OK 08:11:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:32 Set A/D data flow result=40 08:11:32 Set A/D channel type result=40 08:11:32 Set A/D encoding result=40 08:11:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:32 Set channel filter=0.000000e+000 result=40 08:11:32 Config A/D Result=40 08:11:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:32 Get A/D filter: -9.255963e+061 result=40 08:11:32 Get A/D value=-858993460 result=40 08:11:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:32 Aux= 08:11:32 Message to Camera, serial 215088 queued 08:12:09 Received message from Master: op=PointingHead serial=215101 08:12:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:12:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:12:09 Point started: ret=0 08:12:09 point_skyscan result=0 08:12:10 Check angles 08:12:10 SkyScan query 08:12:10 SkyScan query done: ret=0 az=134.565<-8971 ze=96.705<-5553 Statuses=0009 0009 08:12:10 Msec=0 True Az=134.565 Ze=96.705 Az status=0009 Ze status=0009 08:12:10 Check angles 08:12:10 SkyScan query 08:12:11 SkyScan query done: ret=0 az=130.995<-8733 ze=118.08<-4128 Statuses=0008 0009 08:12:11 Msec=750 True Az=130.995 Ze=118.08 Az status=0008 Ze status=0009 08:12:11 Check angles 08:12:11 SkyScan query 08:12:12 SkyScan query done: ret=0 az=130.995<-8733 ze=139.08<-2728 Statuses=0008 0009 08:12:12 Msec=1500 True Az=130.995 Ze=139.08 Az status=0008 Ze status=0009 08:12:12 Check angles 08:12:12 SkyScan query 08:12:13 SkyScan query done: ret=0 az=130.995<-8733 ze=159.99<-1334 Statuses=0008 0009 08:12:13 Msec=2250 True Az=130.995 Ze=159.99 Az status=0008 Ze status=0009 08:12:13 Check angles 08:12:13 SkyScan query 08:12:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.04<-23936 Statuses=0008 0009 08:12:13 Msec=3000 True Az=130.995 Ze=-179.04 Az status=0008 Ze status=0009 08:12:13 Check angles 08:12:13 SkyScan query 08:12:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.07<-22538 Statuses=0008 0009 08:12:14 Msec=3750 True Az=130.995 Ze=-158.07 Az status=0008 Ze status=0009 08:12:14 Check angles 08:12:14 SkyScan query 08:12:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 08:12:15 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 08:12:15 Check angles 08:12:15 SkyScan query 08:12:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:12:16 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:12:16 Message to Master queued w/err=0: serial=215101 error=0 08:12:21 Received message from Master: op=Filter serial=215102 08:12:21 Color wheel filter change from 0 to 0 08:12:21 FLIGetFilterPos err=0 currentPosition=0 08:12:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:21 Filter is already there-color wheel unchanged 08:12:21 Received message from Master: op=Shutter serial=215103 08:12:21 Shutter LASER close 08:12:21 Received message from Camera: op=State serial=215105 08:12:21 GetSingleValue result=40 Value=cccccccc 08:12:21 SkyScan query 08:12:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:12:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:21 Parameters OK 08:12:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:21 Set A/D data flow result=40 08:12:21 Set A/D channel type result=40 08:12:21 Set A/D encoding result=40 08:12:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:21 Set channel filter=0.000000e+000 result=40 08:12:21 Config A/D Result=40 08:12:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:21 Get A/D filter: -9.255963e+061 result=40 08:12:21 Get A/D value=-858993460 result=40 08:12:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:21 Parameters OK 08:12:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:21 Set A/D data flow result=40 08:12:21 Set A/D channel type result=40 08:12:21 Set A/D encoding result=40 08:12:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:21 Set channel filter=0.000000e+000 result=40 08:12:21 Config A/D Result=40 08:12:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:21 Get A/D filter: -9.255963e+061 result=40 08:12:21 Get A/D value=-858993460 result=40 08:12:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:21 Aux= 08:12:21 Message to Camera, serial 215105 queued 08:12:58 Received message from Master: op=PointingHead serial=215118 08:12:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:12:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:12:59 Point started: ret=0 08:12:59 point_skyscan result=0 08:12:59 Check angles 08:12:59 SkyScan query 08:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0009 0009 08:13:00 Msec=0 True Az=112.995 Ze=-171.315 Az status=0009 Ze status=0009 08:13:00 Check angles 08:13:00 SkyScan query 08:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:13:01 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:13:01 Message to Master queued w/err=0: serial=215118 error=0 08:13:06 Received message from Master: op=Filter serial=215119 08:13:06 Color wheel filter change from 0 to 0 08:13:06 FLIGetFilterPos err=0 currentPosition=0 08:13:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:06 Filter is already there-color wheel unchanged 08:13:06 Received message from Master: op=Shutter serial=215120 08:13:06 Shutter LASER open 08:13:06 Received message from Camera: op=State serial=215122 08:13:06 GetSingleValue result=40 Value=cccccccc 08:13:06 SkyScan query 08:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:07 Parameters OK 08:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:07 Set A/D data flow result=40 08:13:07 Set A/D channel type result=40 08:13:07 Set A/D encoding result=40 08:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:07 Set channel filter=0.000000e+000 result=40 08:13:07 Config A/D Result=40 08:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:07 Get A/D filter: -9.255963e+061 result=40 08:13:07 Get A/D value=-858993460 result=40 08:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:07 Parameters OK 08:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:07 Set A/D data flow result=40 08:13:07 Set A/D channel type result=40 08:13:07 Set A/D encoding result=40 08:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:07 Set channel filter=0.000000e+000 result=40 08:13:07 Config A/D Result=40 08:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:07 Get A/D filter: -9.255963e+061 result=40 08:13:07 Get A/D value=-858993460 result=40 08:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:07 Aux= 08:13:07 Message to Camera, serial 215122 queued 08:13:15 Received message from Master: op=Shutter serial=215132 08:13:15 Shutter LASER close 08:13:16 Received message from Master: op=PointingHead serial=215136 08:13:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:13:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:13:16 Point started: ret=0 08:13:16 point_skyscan result=0 08:13:17 Check angles 08:13:17 SkyScan query 08:13:17 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.995<-21533 Statuses=0009 0009 08:13:17 Msec=0 True Az=136.38 Ze=-142.995 Az status=0009 Ze status=0009 08:13:18 Check angles 08:13:18 SkyScan query 08:13:18 SkyScan query done: ret=0 az=154.185<-10279 ze=-121.56<-20104 Statuses=0009 0009 08:13:18 Msec=750 True Az=154.185 Ze=-121.56 Az status=0009 Ze status=0009 08:13:18 Check angles 08:13:18 SkyScan query 08:13:19 SkyScan query done: ret=0 az=171.66<-11444 ze=-100.575<-18705 Statuses=0009 0009 08:13:19 Msec=1500 True Az=171.66 Ze=-100.575 Az status=0009 Ze status=0009 08:13:19 Check angles 08:13:19 SkyScan query 08:13:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.68<-17312 Statuses=0008 0009 08:13:20 Msec=2250 True Az=176.01 Ze=-79.68 Az status=0008 Ze status=0009 08:13:20 Check angles 08:13:20 SkyScan query 08:13:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.695<-15913 Statuses=0008 0009 08:13:20 Msec=3000 True Az=176.01 Ze=-58.695 Az status=0008 Ze status=0009 08:13:21 Check angles 08:13:21 SkyScan query 08:13:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:13:21 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:13:21 Message to Master queued w/err=0: serial=215136 error=0 08:13:26 Received message from Master: op=Filter serial=215137 08:13:26 Color wheel filter change from 0 to 0 08:13:26 FLIGetFilterPos err=0 currentPosition=0 08:13:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:26 Filter is already there-color wheel unchanged 08:13:26 Received message from Master: op=Shutter serial=215138 08:13:26 Shutter LASER close 08:13:26 Received message from Camera: op=State serial=215140 08:13:26 GetSingleValue result=40 Value=cccccccc 08:13:26 SkyScan query 08:13:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:13:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:27 Parameters OK 08:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:27 Set A/D data flow result=40 08:13:27 Set A/D channel type result=40 08:13:27 Set A/D encoding result=40 08:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:27 Set channel filter=0.000000e+000 result=40 08:13:27 Config A/D Result=40 08:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:27 Get A/D filter: -9.255963e+061 result=40 08:13:27 Get A/D value=-858993460 result=40 08:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:27 Parameters OK 08:13:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:27 Set A/D data flow result=40 08:13:27 Set A/D channel type result=40 08:13:27 Set A/D encoding result=40 08:13:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:27 Set channel filter=0.000000e+000 result=40 08:13:27 Config A/D Result=40 08:13:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:27 Get A/D filter: -9.255963e+061 result=40 08:13:27 Get A/D value=-858993460 result=40 08:13:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:27 Aux= 08:13:27 Message to Camera, serial 215140 queued 08:14:04 Received message from Master: op=PointingHead serial=215153 08:14:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:14:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:14:04 Point started: ret=0 08:14:04 point_skyscan result=0 08:14:05 Check angles 08:14:05 SkyScan query 08:14:06 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.735<-13449 Statuses=0009 0009 08:14:06 Msec=0 True Az=152.97 Ze=-21.735 Az status=0009 Ze status=0009 08:14:06 Check angles 08:14:06 SkyScan query 08:14:06 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.27<-12018 Statuses=0009 0009 08:14:06 Msec=750 True Az=135.135 Ze=-0.27 Az status=0009 Ze status=0009 08:14:06 Check angles 08:14:06 SkyScan query 08:14:07 SkyScan query done: ret=0 az=117.6<-7840 ze=20.64<-10624 Statuses=0009 0009 08:14:07 Msec=1500 True Az=117.6 Ze=20.64 Az status=0009 Ze status=0009 08:14:07 Check angles 08:14:07 SkyScan query 08:14:08 SkyScan query done: ret=0 az=100.245<-6683 ze=41.625<-9225 Statuses=0009 0009 08:14:08 Msec=2250 True Az=100.245 Ze=41.625 Az status=0009 Ze status=0009 08:14:08 Check angles 08:14:08 SkyScan query 08:14:09 SkyScan query done: ret=0 az=86.025<-5735 ze=51.585<-8561 Statuses=0009 0008 08:14:09 Msec=3000 True Az=86.025 Ze=51.585 Az status=0009 Ze status=0008 08:14:09 Check angles 08:14:09 SkyScan query 08:14:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:14:09 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:14:09 Message to Master queued w/err=0: serial=215153 error=0 08:14:14 Received message from Master: op=Filter serial=215154 08:14:14 Color wheel filter change from 0 to 0 08:14:14 FLIGetFilterPos err=0 currentPosition=0 08:14:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:14 Filter is already there-color wheel unchanged 08:14:14 Received message from Master: op=Shutter serial=215155 08:14:14 Shutter LASER close 08:14:15 Received message from Camera: op=State serial=215157 08:14:15 GetSingleValue result=40 Value=cccccccc 08:14:15 SkyScan query 08:14:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:14:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:15 Parameters OK 08:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:15 Set A/D data flow result=40 08:14:15 Set A/D channel type result=40 08:14:15 Set A/D encoding result=40 08:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:15 Set channel filter=0.000000e+000 result=40 08:14:15 Config A/D Result=40 08:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:15 Get A/D filter: -9.255963e+061 result=40 08:14:15 Get A/D value=-858993460 result=40 08:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:15 Parameters OK 08:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:15 Set A/D data flow result=40 08:14:15 Set A/D channel type result=40 08:14:15 Set A/D encoding result=40 08:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:15 Set channel filter=0.000000e+000 result=40 08:14:15 Config A/D Result=40 08:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:15 Get A/D filter: -9.255963e+061 result=40 08:14:15 Get A/D value=-858993460 result=40 08:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:15 Aux= 08:14:15 Message to Camera, serial 215157 queued 08:14:52 Received message from Master: op=PointingHead serial=215170 08:14:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:14:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:14:52 Point started: ret=0 08:14:52 point_skyscan result=0 08:14:53 Check angles 08:14:53 SkyScan query 08:14:54 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 08:14:54 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 08:14:54 Check angles 08:14:54 SkyScan query 08:14:54 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 08:14:54 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 08:14:55 Check angles 08:14:55 SkyScan query 08:14:55 SkyScan query done: ret=0 az=144.3<-9620 ze=38.505<-9433 Statuses=0009 0008 08:14:55 Msec=1500 True Az=144.3 Ze=38.505 Az status=0009 Ze status=0008 08:14:55 Check angles 08:14:55 SkyScan query 08:14:56 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 08:14:56 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 08:14:56 Check angles 08:14:56 SkyScan query 08:14:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:14:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:14:57 Check angles 08:14:57 SkyScan query 08:14:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:14:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:14:57 Message to Master queued w/err=0: serial=215170 error=0 08:15:02 Received message from Master: op=Filter serial=215171 08:15:02 Color wheel filter change from 0 to 0 08:15:02 FLIGetFilterPos err=0 currentPosition=0 08:15:02 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:02 Filter is already there-color wheel unchanged 08:15:03 Received message from Master: op=Shutter serial=215172 08:15:03 Shutter LASER close 08:15:03 Received message from Camera: op=State serial=215174 08:15:03 GetSingleValue result=40 Value=cccccccc 08:15:03 SkyScan query 08:15:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:03 Parameters OK 08:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:03 Set A/D data flow result=40 08:15:03 Set A/D channel type result=40 08:15:03 Set A/D encoding result=40 08:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:03 Set channel filter=0.000000e+000 result=40 08:15:03 Config A/D Result=40 08:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:03 Get A/D filter: -9.255963e+061 result=40 08:15:03 Get A/D value=-858993460 result=40 08:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:03 Parameters OK 08:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:03 Set A/D data flow result=40 08:15:03 Set A/D channel type result=40 08:15:03 Set A/D encoding result=40 08:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:03 Set channel filter=0.000000e+000 result=40 08:15:03 Config A/D Result=40 08:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:03 Get A/D filter: -9.255963e+061 result=40 08:15:03 Get A/D value=-858993460 result=40 08:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 [UTC 2018-12-17 08:15:03] 08:15:03 Aux= 08:15:03 Message to Camera, serial 215174 queued 08:15:27 Received message from Master: op=Identify serial=215175 08:15:40 Received message from Master: op=PointingHead serial=215190 08:15:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:15:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:15:40 Point started: ret=0 08:15:40 point_skyscan result=0 08:15:41 Check angles 08:15:41 SkyScan query 08:15:42 SkyScan query done: ret=0 az=152.97<-10198 ze=8.64<-11424 Statuses=0009 0009 08:15:42 Msec=0 True Az=152.97 Ze=8.64 Az status=0009 Ze status=0009 08:15:42 Check angles 08:15:42 SkyScan query 08:15:43 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.27<-12818 Statuses=0009 0009 08:15:43 Msec=750 True Az=135.435 Ze=-12.27 Az status=0009 Ze status=0009 08:15:43 Check angles 08:15:43 SkyScan query 08:15:43 SkyScan query done: ret=0 az=117.96<-7864 ze=-33.24<-14216 Statuses=0009 0009 08:15:43 Msec=1500 True Az=117.96 Ze=-33.24 Az status=0009 Ze status=0009 08:15:43 Check angles 08:15:43 SkyScan query 08:15:44 SkyScan query done: ret=0 az=100.605<-6707 ze=-51.54<-15436 Statuses=0009 0009 08:15:44 Msec=2250 True Az=100.605 Ze=-51.54 Az status=0009 Ze status=0009 08:15:44 Check angles 08:15:44 SkyScan query 08:15:45 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 08:15:45 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 08:15:45 Check angles 08:15:45 SkyScan query 08:15:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:15:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:15:46 Message to Master queued w/err=0: serial=215190 error=0 08:15:51 Received message from Master: op=Filter serial=215191 08:15:51 Color wheel filter change from 0 to 0 08:15:51 FLIGetFilterPos err=0 currentPosition=0 08:15:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:51 Filter is already there-color wheel unchanged 08:15:51 Received message from Master: op=Shutter serial=215192 08:15:51 Shutter LASER close 08:15:51 Received message from Camera: op=State serial=215194 08:15:51 GetSingleValue result=40 Value=cccccccc 08:15:51 SkyScan query 08:15:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:15:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:51 Parameters OK 08:15:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:51 Set A/D data flow result=40 08:15:51 Set A/D channel type result=40 08:15:51 Set A/D encoding result=40 08:15:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:51 Set channel filter=0.000000e+000 result=40 08:15:51 Config A/D Result=40 08:15:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:51 Get A/D filter: -9.255963e+061 result=40 08:15:51 Get A/D value=-858993460 result=40 08:15:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:51 Parameters OK 08:15:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:51 Set A/D data flow result=40 08:15:51 Set A/D channel type result=40 08:15:51 Set A/D encoding result=40 08:15:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:51 Set channel filter=0.000000e+000 result=40 08:15:51 Config A/D Result=40 08:15:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:51 Get A/D filter: -9.255963e+061 result=40 08:15:51 Get A/D value=-858993460 result=40 08:15:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:51 Aux= 08:15:51 Message to Camera, serial 215194 queued [UTC 2018-12-17 08:15:52] 08:16:28 Received message from Master: op=PointingHead serial=215207 08:16:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:16:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:16:28 Point started: ret=0 08:16:28 point_skyscan result=0 08:16:29 Check angles 08:16:29 SkyScan query 08:16:30 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.045<-17403 Statuses=0009 0009 08:16:30 Msec=0 True Az=108.795 Ze=-81.045 Az status=0009 Ze status=0009 08:16:30 Check angles 08:16:30 SkyScan query 08:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 08:16:31 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 08:16:31 Check angles 08:16:31 SkyScan query 08:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 08:16:31 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 08:16:31 Check angles 08:16:31 SkyScan query 08:16:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 08:16:32 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 08:16:32 Check angles 08:16:32 SkyScan query 08:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 08:16:33 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 08:16:33 Check angles 08:16:33 SkyScan query 08:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:16:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:16:34 Message to Master queued w/err=0: serial=215207 error=0 08:16:39 Received message from Master: op=Filter serial=215208 08:16:39 Color wheel filter change from 0 to 0 08:16:39 FLIGetFilterPos err=0 currentPosition=0 08:16:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:39 Filter is already there-color wheel unchanged 08:16:39 Received message from Master: op=Shutter serial=215209 08:16:39 Shutter LASER open 08:16:39 Received message from Camera: op=State serial=215211 08:16:39 GetSingleValue result=40 Value=cccccccc 08:16:39 SkyScan query 08:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:16:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:40 Parameters OK 08:16:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:40 Set A/D data flow result=40 08:16:40 Set A/D channel type result=40 08:16:40 Set A/D encoding result=40 08:16:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:40 Set channel filter=0.000000e+000 result=40 08:16:40 Config A/D Result=40 08:16:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:40 Get A/D filter: -9.255963e+061 result=40 08:16:40 Get A/D value=-858993460 result=40 08:16:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:40 Parameters OK 08:16:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:40 Set A/D data flow result=40 08:16:40 Set A/D channel type result=40 08:16:40 Set A/D encoding result=40 08:16:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:40 Set channel filter=0.000000e+000 result=40 08:16:40 Config A/D Result=40 08:16:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:40 Get A/D filter: -9.255963e+061 result=40 08:16:40 Get A/D value=-858993460 result=40 08:16:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:40 Aux= 08:16:40 Message to Camera, serial 215211 queued 08:16:48 Received message from Master: op=Shutter serial=215221 08:16:48 Shutter LASER close 08:16:48 Received message from Master: op=PointingHead serial=215225 08:16:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:16:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:16:49 Point started: ret=0 08:16:49 point_skyscan result=0 08:16:49 Check angles 08:16:49 SkyScan query 08:16:50 SkyScan query done: ret=0 az=89.88<-5992 ze=157.305<-1513 Statuses=0009 0009 08:16:50 Msec=0 True Az=89.88 Ze=157.305 Az status=0009 Ze status=0009 08:16:50 Check angles 08:16:50 SkyScan query 08:16:51 SkyScan query done: ret=0 az=72.06<-4804 ze=135.93<-2938 Statuses=0009 0009 08:16:51 Msec=750 True Az=72.06 Ze=135.93 Az status=0009 Ze status=0009 08:16:51 Check angles 08:16:51 SkyScan query 08:16:52 SkyScan query done: ret=0 az=54.45<-3630 ze=114.495<-4367 Statuses=0009 0009 08:16:52 Msec=1500 True Az=54.45 Ze=114.495 Az status=0009 Ze status=0009 08:16:52 Check angles 08:16:52 SkyScan query 08:16:52 SkyScan query done: ret=0 az=40.995<-2733 ze=93.6<-5760 Statuses=0009 0009 08:16:52 Msec=2250 True Az=40.995 Ze=93.6 Az status=0009 Ze status=0009 08:16:53 Check angles 08:16:53 SkyScan query 08:16:53 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 08:16:53 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 08:16:53 Check angles 08:16:53 SkyScan query 08:16:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 08:16:54 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 08:16:54 Check angles 08:16:54 SkyScan query 08:16:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:16:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:16:55 Message to Master queued w/err=0: serial=215225 error=0 08:17:00 Received message from Master: op=Filter serial=215226 08:17:00 Color wheel filter change from 0 to 0 08:17:00 FLIGetFilterPos err=0 currentPosition=0 08:17:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:00 Filter is already there-color wheel unchanged 08:17:00 Received message from Master: op=Shutter serial=215227 08:17:00 Shutter LASER close 08:17:00 Received message from Camera: op=State serial=215229 08:17:00 GetSingleValue result=40 Value=cccccccc 08:17:00 SkyScan query 08:17:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:17:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:01 Parameters OK 08:17:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:01 Set A/D data flow result=40 08:17:01 Set A/D channel type result=40 08:17:01 Set A/D encoding result=40 08:17:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:01 Set channel filter=0.000000e+000 result=40 08:17:01 Config A/D Result=40 08:17:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:01 Get A/D filter: -9.255963e+061 result=40 08:17:01 Get A/D value=-858993460 result=40 08:17:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:01 Parameters OK 08:17:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:01 Set A/D data flow result=40 08:17:01 Set A/D channel type result=40 08:17:01 Set A/D encoding result=40 08:17:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:01 Set channel filter=0.000000e+000 result=40 08:17:01 Config A/D Result=40 08:17:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:01 Get A/D filter: -9.255963e+061 result=40 08:17:01 Get A/D value=-858993460 result=40 08:17:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:01 Aux= 08:17:01 Message to Camera, serial 215229 queued 08:17:36 Received message from Master: op=PointingHead serial=215241 08:17:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:17:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:17:37 Point started: ret=0 08:17:37 point_skyscan result=0 08:17:38 Check angles 08:17:38 SkyScan query 08:17:38 SkyScan query done: ret=0 az=63.915<-4261 ze=66.51<-7566 Statuses=0009 0008 08:17:38 Msec=0 True Az=63.915 Ze=66.51 Az status=0009 Ze status=0008 08:17:38 Check angles 08:17:38 SkyScan query 08:17:39 SkyScan query done: ret=0 az=81.72<-5448 ze=66.51<-7566 Statuses=0009 0008 08:17:39 Msec=750 True Az=81.72 Ze=66.51 Az status=0009 Ze status=0008 08:17:39 Check angles 08:17:39 SkyScan query 08:17:40 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 08:17:40 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 08:17:40 Check angles 08:17:40 SkyScan query 08:17:40 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 08:17:40 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 08:17:41 Check angles 08:17:41 SkyScan query 08:17:41 SkyScan query done: ret=0 az=134.145<-8943 ze=66.495<-7567 Statuses=0009 0008 08:17:41 Msec=3000 True Az=134.145 Ze=66.495 Az status=0009 Ze status=0008 08:17:41 Check angles 08:17:41 SkyScan query 08:17:42 SkyScan query done: ret=0 az=151.485<-10099 ze=66.495<-7567 Statuses=0009 0008 08:17:42 Msec=3750 True Az=151.485 Ze=66.495 Az status=0009 Ze status=0008 08:17:42 Check angles 08:17:42 SkyScan query 08:17:43 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:17:43 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:17:43 Message to Master queued w/err=0: serial=215241 error=0 08:17:48 Received message from Master: op=Filter serial=215242 08:17:48 Color wheel filter change from 0 to 0 08:17:48 FLIGetFilterPos err=0 currentPosition=0 08:17:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:48 Filter is already there-color wheel unchanged 08:17:48 Received message from Master: op=Shutter serial=215243 08:17:48 Shutter LASER close 08:17:48 Received message from Camera: op=State serial=215245 08:17:48 GetSingleValue result=40 Value=cccccccc 08:17:48 SkyScan query 08:17:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:17:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:48 Parameters OK 08:17:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:48 Set A/D data flow result=40 08:17:48 Set A/D channel type result=40 08:17:48 Set A/D encoding result=40 08:17:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:48 Set channel filter=0.000000e+000 result=40 08:17:48 Config A/D Result=40 08:17:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:48 Get A/D filter: -9.255963e+061 result=40 08:17:48 Get A/D value=-858993460 result=40 08:17:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:48 Parameters OK 08:17:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:48 Set A/D data flow result=40 08:17:48 Set A/D channel type result=40 08:17:48 Set A/D encoding result=40 08:17:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:48 Set channel filter=0.000000e+000 result=40 08:17:48 Config A/D Result=40 08:17:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:48 Get A/D filter: -9.255963e+061 result=40 08:17:48 Get A/D value=-858993460 result=40 08:17:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:48 Aux= 08:17:48 Message to Camera, serial 215245 queued 08:18:25 Received message from Master: op=PointingHead serial=215258 08:18:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:18:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:18:26 Point started: ret=0 08:18:26 point_skyscan result=0 08:18:26 Check angles 08:18:26 SkyScan query 08:18:27 SkyScan query done: ret=0 az=134.835<-8989 ze=96.39<-5574 Statuses=0009 0009 08:18:27 Msec=0 True Az=134.835 Ze=96.39 Az status=0009 Ze status=0009 08:18:27 Check angles 08:18:27 SkyScan query 08:18:28 SkyScan query done: ret=0 az=130.995<-8733 ze=117.345<-4177 Statuses=0008 0009 08:18:28 Msec=750 True Az=130.995 Ze=117.345 Az status=0008 Ze status=0009 08:18:28 Check angles 08:18:28 SkyScan query 08:18:29 SkyScan query done: ret=0 az=130.995<-8733 ze=138.255<-2783 Statuses=0008 0009 08:18:29 Msec=1500 True Az=130.995 Ze=138.255 Az status=0008 Ze status=0009 08:18:29 Check angles 08:18:29 SkyScan query 08:18:29 SkyScan query done: ret=0 az=130.995<-8733 ze=159.255<-1383 Statuses=0008 0009 08:18:29 Msec=2250 True Az=130.995 Ze=159.255 Az status=0008 Ze status=0009 08:18:29 Check angles 08:18:29 SkyScan query 08:18:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.82<-23988 Statuses=0008 0009 08:18:30 Msec=3000 True Az=130.995 Ze=-179.82 Az status=0008 Ze status=0009 08:18:30 Check angles 08:18:30 SkyScan query 08:18:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.85<-22590 Statuses=0008 0009 08:18:31 Msec=3750 True Az=130.995 Ze=-158.85 Az status=0008 Ze status=0009 08:18:31 Check angles 08:18:31 SkyScan query 08:18:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 08:18:32 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 08:18:32 Check angles 08:18:32 SkyScan query 08:18:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:18:32 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:18:32 Message to Master queued w/err=0: serial=215258 error=0 08:18:37 Received message from Master: op=Filter serial=215259 08:18:37 Color wheel filter change from 0 to 0 08:18:37 FLIGetFilterPos err=0 currentPosition=0 08:18:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:37 Filter is already there-color wheel unchanged 08:18:37 Received message from Master: op=Shutter serial=215260 08:18:37 Shutter LASER close 08:18:38 Received message from Camera: op=State serial=215262 08:18:38 GetSingleValue result=40 Value=cccccccc 08:18:38 SkyScan query 08:18:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:18:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:38 Parameters OK 08:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:38 Set A/D data flow result=40 08:18:38 Set A/D channel type result=40 08:18:38 Set A/D encoding result=40 08:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:38 Set channel filter=0.000000e+000 result=40 08:18:38 Config A/D Result=40 08:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:38 Get A/D filter: -9.255963e+061 result=40 08:18:38 Get A/D value=-858993460 result=40 08:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:38 Parameters OK 08:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:38 Set A/D data flow result=40 08:18:38 Set A/D channel type result=40 08:18:38 Set A/D encoding result=40 08:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:38 Set channel filter=0.000000e+000 result=40 08:18:38 Config A/D Result=40 08:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:38 Get A/D filter: -9.255963e+061 result=40 08:18:38 Get A/D value=-858993460 result=40 08:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:38 Aux= 08:18:38 Message to Camera, serial 215262 queued 08:19:15 Received message from Master: op=PointingHead serial=215275 08:19:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:19:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:19:15 Point started: ret=0 08:19:15 point_skyscan result=0 08:19:16 Check angles 08:19:16 SkyScan query 08:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.255<-23417 Statuses=0009 0009 08:19:17 Msec=0 True Az=112.995 Ze=-171.255 Az status=0009 Ze status=0009 08:19:17 Check angles 08:19:17 SkyScan query 08:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:19:17 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:19:17 Message to Master queued w/err=0: serial=215275 error=0 08:19:22 Received message from Master: op=Filter serial=215276 08:19:22 Color wheel filter change from 0 to 0 08:19:22 FLIGetFilterPos err=0 currentPosition=0 08:19:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:22 Filter is already there-color wheel unchanged 08:19:23 Received message from Master: op=Shutter serial=215277 08:19:23 Shutter LASER open 08:19:23 Received message from Camera: op=State serial=215279 08:19:23 GetSingleValue result=40 Value=cccccccc 08:19:23 SkyScan query 08:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:19:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:23 Parameters OK 08:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:23 Set A/D data flow result=40 08:19:23 Set A/D channel type result=40 08:19:23 Set A/D encoding result=40 08:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:23 Set channel filter=0.000000e+000 result=40 08:19:23 Config A/D Result=40 08:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:23 Get A/D filter: -9.255963e+061 result=40 08:19:23 Get A/D value=-858993460 result=40 08:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:23 Parameters OK 08:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:23 Set A/D data flow result=40 08:19:23 Set A/D channel type result=40 08:19:23 Set A/D encoding result=40 08:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:23 Set channel filter=0.000000e+000 result=40 08:19:23 Config A/D Result=40 08:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:23 Get A/D filter: -9.255963e+061 result=40 08:19:23 Get A/D value=-858993460 result=40 08:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:23 Aux= 08:19:23 Message to Camera, serial 215279 queued 08:19:32 Received message from Master: op=Shutter serial=215289 08:19:32 Shutter LASER close 08:19:32 Received message from Master: op=PointingHead serial=215293 08:19:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:19:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:19:33 Point started: ret=0 08:19:33 point_skyscan result=0 08:19:33 Check angles 08:19:33 SkyScan query 08:19:34 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.46<-21564 Statuses=0009 0009 08:19:34 Msec=0 True Az=135.765 Ze=-143.46 Az status=0009 Ze status=0009 08:19:34 Check angles 08:19:34 SkyScan query 08:19:35 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.49<-20166 Statuses=0009 0009 08:19:35 Msec=750 True Az=153.3 Ze=-122.49 Az status=0009 Ze status=0009 08:19:35 Check angles 08:19:35 SkyScan query 08:19:36 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.61<-18774 Statuses=0009 0009 08:19:36 Msec=1500 True Az=170.775 Ze=-101.61 Az status=0009 Ze status=0009 08:19:36 Check angles 08:19:36 SkyScan query 08:19:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.55<-17370 Statuses=0008 0009 08:19:36 Msec=2250 True Az=175.995 Ze=-80.55 Az status=0008 Ze status=0009 08:19:36 Check angles 08:19:36 SkyScan query 08:19:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.655<-15977 Statuses=0008 0009 08:19:37 Msec=3000 True Az=176.01 Ze=-59.655 Az status=0008 Ze status=0009 08:19:37 Check angles 08:19:37 SkyScan query 08:19:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:19:38 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:19:38 Message to Master queued w/err=0: serial=215293 error=0 08:19:43 Received message from Master: op=Filter serial=215294 08:19:43 Color wheel filter change from 0 to 0 08:19:43 FLIGetFilterPos err=0 currentPosition=0 08:19:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:43 Filter is already there-color wheel unchanged 08:19:43 Received message from Master: op=Shutter serial=215295 08:19:43 Shutter LASER close 08:19:43 Received message from Camera: op=State serial=215297 08:19:43 GetSingleValue result=40 Value=cccccccc 08:19:43 SkyScan query 08:19:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:19:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:44 Parameters OK 08:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:44 Set A/D data flow result=40 08:19:44 Set A/D channel type result=40 08:19:44 Set A/D encoding result=40 08:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:44 Set channel filter=0.000000e+000 result=40 08:19:44 Config A/D Result=40 08:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:44 Get A/D filter: -9.255963e+061 result=40 08:19:44 Get A/D value=-858993460 result=40 08:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:44 Parameters OK 08:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:44 Set A/D data flow result=40 08:19:44 Set A/D channel type result=40 08:19:44 Set A/D encoding result=40 08:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:44 Set channel filter=0.000000e+000 result=40 08:19:44 Config A/D Result=40 08:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:44 Get A/D filter: -9.255963e+061 result=40 08:19:44 Get A/D value=-858993460 result=40 08:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:44 Aux= 08:19:44 Message to Camera, serial 215297 queued 08:20:20 Received message from Master: op=PointingHead serial=215310 08:20:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:20:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:20:21 Point started: ret=0 08:20:21 point_skyscan result=0 08:20:22 Check angles 08:20:22 SkyScan query 08:20:22 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.585<-13439 Statuses=0009 0009 08:20:22 Msec=0 True Az=152.775 Ze=-21.585 Az status=0009 Ze status=0009 08:20:22 Check angles 08:20:22 SkyScan query 08:20:23 SkyScan query done: ret=0 az=134.955<-8997 ze=-0.15<-12010 Statuses=0009 0009 08:20:23 Msec=750 True Az=134.955 Ze=-0.15 Az status=0009 Ze status=0009 08:20:23 Check angles 08:20:23 SkyScan query 08:20:24 SkyScan query done: ret=0 az=117.465<-7831 ze=20.805<-10613 Statuses=0009 0009 08:20:24 Msec=1500 True Az=117.465 Ze=20.805 Az status=0009 Ze status=0009 08:20:24 Check angles 08:20:24 SkyScan query 08:20:24 SkyScan query done: ret=0 az=100.095<-6673 ze=41.745<-9217 Statuses=0009 0009 08:20:24 Msec=2250 True Az=100.095 Ze=41.745 Az status=0009 Ze status=0009 08:20:25 Check angles 08:20:25 SkyScan query 08:20:25 SkyScan query done: ret=0 az=86.025<-5735 ze=51.585<-8561 Statuses=0009 0008 08:20:25 Msec=3000 True Az=86.025 Ze=51.585 Az status=0009 Ze status=0008 08:20:25 Check angles 08:20:25 SkyScan query 08:20:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:20:26 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:20:26 Message to Master queued w/err=0: serial=215310 error=0 08:20:31 Received message from Master: op=Filter serial=215311 08:20:31 Color wheel filter change from 0 to 0 08:20:31 FLIGetFilterPos err=0 currentPosition=0 08:20:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:31 Filter is already there-color wheel unchanged 08:20:31 Received message from Master: op=Shutter serial=215312 08:20:31 Shutter LASER close 08:20:31 Received message from Camera: op=State serial=215314 08:20:31 GetSingleValue result=40 Value=cccccccc 08:20:31 SkyScan query 08:20:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:20:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:32 Parameters OK 08:20:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:32 Set A/D data flow result=40 08:20:32 Set A/D channel type result=40 08:20:32 Set A/D encoding result=40 08:20:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:32 Set channel filter=0.000000e+000 result=40 08:20:32 Config A/D Result=40 08:20:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:32 Get A/D filter: -9.255963e+061 result=40 08:20:32 Get A/D value=-858993460 result=40 08:20:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:32 Parameters OK 08:20:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:32 Set A/D data flow result=40 08:20:32 Set A/D channel type result=40 08:20:32 Set A/D encoding result=40 08:20:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:32 Set channel filter=0.000000e+000 result=40 08:20:32 Config A/D Result=40 08:20:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:32 Get A/D filter: -9.255963e+061 result=40 08:20:32 Get A/D value=-858993460 result=40 08:20:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:32 Aux= 08:20:32 Message to Camera, serial 215314 queued 08:21:09 Received message from Master: op=PointingHead serial=215327 08:21:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:21:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:21:09 Point started: ret=0 08:21:09 point_skyscan result=0 08:21:10 Check angles 08:21:10 SkyScan query 08:21:10 SkyScan query done: ret=0 az=109.5<-7300 ze=38.49<-9434 Statuses=0009 0008 08:21:10 Msec=0 True Az=109.5 Ze=38.49 Az status=0009 Ze status=0008 08:21:10 Check angles 08:21:10 SkyScan query 08:21:11 SkyScan query done: ret=0 az=127.26<-8484 ze=38.505<-9433 Statuses=0009 0008 08:21:11 Msec=750 True Az=127.26 Ze=38.505 Az status=0009 Ze status=0008 08:21:11 Check angles 08:21:11 SkyScan query 08:21:12 SkyScan query done: ret=0 az=144.9<-9660 ze=38.505<-9433 Statuses=0009 0008 08:21:12 Msec=1500 True Az=144.9 Ze=38.505 Az status=0009 Ze status=0008 08:21:12 Check angles 08:21:12 SkyScan query 08:21:13 SkyScan query done: ret=0 az=162.66<-10844 ze=38.505<-9433 Statuses=0009 0008 08:21:13 Msec=2250 True Az=162.66 Ze=38.505 Az status=0009 Ze status=0008 08:21:13 Check angles 08:21:13 SkyScan query 08:21:13 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 08:21:13 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 08:21:14 Check angles 08:21:14 SkyScan query 08:21:14 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:21:14 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:21:14 Message to Master queued w/err=0: serial=215327 error=0 08:21:19 Received message from Master: op=Filter serial=215328 08:21:19 Color wheel filter change from 0 to 0 08:21:19 FLIGetFilterPos err=0 currentPosition=0 08:21:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:19 Filter is already there-color wheel unchanged 08:21:19 Received message from Master: op=Shutter serial=215329 08:21:19 Shutter LASER close 08:21:19 Received message from Camera: op=State serial=215331 08:21:19 GetSingleValue result=40 Value=cccccccc 08:21:19 SkyScan query 08:21:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:21:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:20 Parameters OK 08:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:20 Set A/D data flow result=40 08:21:20 Set A/D channel type result=40 08:21:20 Set A/D encoding result=40 08:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:20 Set channel filter=0.000000e+000 result=40 08:21:20 Config A/D Result=40 08:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:20 Get A/D filter: -9.255963e+061 result=40 08:21:20 Get A/D value=-858993460 result=40 08:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:20 Parameters OK 08:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:20 Set A/D data flow result=40 08:21:20 Set A/D channel type result=40 08:21:20 Set A/D encoding result=40 08:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:20 Set channel filter=0.000000e+000 result=40 08:21:20 Config A/D Result=40 08:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:20 Get A/D filter: -9.255963e+061 result=40 08:21:20 Get A/D value=-858993460 result=40 08:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:20 Aux= 08:21:20 Message to Camera, serial 215331 queued 08:21:57 Received message from Master: op=PointingHead serial=215344 08:21:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:21:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:21:57 Point started: ret=0 08:21:57 point_skyscan result=0 08:21:58 Check angles 08:21:58 SkyScan query 08:21:58 SkyScan query done: ret=0 az=152.955<-10197 ze=8.715<-11419 Statuses=0009 0009 08:21:58 Msec=0 True Az=152.955 Ze=8.715 Az status=0009 Ze status=0009 08:21:59 Check angles 08:21:59 SkyScan query 08:21:59 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.225<-12815 Statuses=0009 0009 08:21:59 Msec=750 True Az=135.45 Ze=-12.225 Az status=0009 Ze status=0009 08:21:59 Check angles 08:21:59 SkyScan query 08:22:00 SkyScan query done: ret=0 az=118.065<-7871 ze=-33.195<-14213 Statuses=0009 0009 08:22:00 Msec=1500 True Az=118.065 Ze=-33.195 Az status=0009 Ze status=0009 08:22:00 Check angles 08:22:00 SkyScan query 08:22:01 SkyScan query done: ret=0 az=100.695<-6713 ze=-51.525<-15435 Statuses=0009 0009 08:22:01 Msec=2250 True Az=100.695 Ze=-51.525 Az status=0009 Ze status=0009 08:22:01 Check angles 08:22:01 SkyScan query 08:22:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 08:22:01 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 08:22:02 Check angles 08:22:02 SkyScan query 08:22:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:22:02 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:22:02 Message to Master queued w/err=0: serial=215344 error=0 08:22:07 Received message from Master: op=Filter serial=215345 08:22:07 Color wheel filter change from 0 to 0 08:22:07 FLIGetFilterPos err=0 currentPosition=0 08:22:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:07 Filter is already there-color wheel unchanged 08:22:07 Received message from Master: op=Shutter serial=215346 08:22:07 Shutter LASER close 08:22:07 Received message from Camera: op=State serial=215348 08:22:07 GetSingleValue result=40 Value=cccccccc 08:22:07 SkyScan query 08:22:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:22:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:08 Parameters OK 08:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:08 Set A/D data flow result=40 08:22:08 Set A/D channel type result=40 08:22:08 Set A/D encoding result=40 08:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:08 Set channel filter=0.000000e+000 result=40 08:22:08 Config A/D Result=40 08:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:08 Get A/D filter: -9.255963e+061 result=40 08:22:08 Get A/D value=-858993460 result=40 08:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:08 Parameters OK 08:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:08 Set A/D data flow result=40 08:22:08 Set A/D channel type result=40 08:22:08 Set A/D encoding result=40 08:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:08 Set channel filter=0.000000e+000 result=40 08:22:08 Config A/D Result=40 08:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:08 Get A/D filter: -9.255963e+061 result=40 08:22:08 Get A/D value=-858993460 result=40 08:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:08 Aux= 08:22:08 Message to Camera, serial 215348 queued 08:22:45 Received message from Master: op=PointingHead serial=215361 08:22:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:22:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:22:45 Point started: ret=0 08:22:45 point_skyscan result=0 08:22:46 Check angles 08:22:46 SkyScan query 08:22:47 SkyScan query done: ret=0 az=109.11<-7274 ze=-81.45<-17430 Statuses=0009 0009 08:22:47 Msec=0 True Az=109.11 Ze=-81.45 Az status=0009 Ze status=0009 08:22:47 Check angles 08:22:47 SkyScan query 08:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.825<-18855 Statuses=0008 0009 08:22:47 Msec=750 True Az=112.995 Ze=-102.825 Az status=0008 Ze status=0009 08:22:47 Check angles 08:22:47 SkyScan query 08:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.81<-20254 Statuses=0008 0009 08:22:48 Msec=1500 True Az=112.995 Ze=-123.81 Az status=0008 Ze status=0009 08:22:48 Check angles 08:22:48 SkyScan query 08:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.17<-21678 Statuses=0008 0009 08:22:49 Msec=2250 True Az=112.995 Ze=-145.17 Az status=0008 Ze status=0009 08:22:49 Check angles 08:22:49 SkyScan query 08:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.56<-23104 Statuses=0008 0009 08:22:50 Msec=3000 True Az=112.995 Ze=-166.56 Az status=0008 Ze status=0009 08:22:50 Check angles 08:22:50 SkyScan query 08:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:22:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:22:50 Message to Master queued w/err=0: serial=215361 error=0 08:22:55 Received message from Master: op=Filter serial=215362 08:22:55 Color wheel filter change from 0 to 0 08:22:55 FLIGetFilterPos err=0 currentPosition=0 08:22:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:55 Filter is already there-color wheel unchanged 08:22:56 Received message from Master: op=Shutter serial=215363 08:22:56 Shutter LASER open 08:22:56 Received message from Camera: op=State serial=215365 08:22:56 GetSingleValue result=40 Value=cccccccc 08:22:56 SkyScan query 08:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:22:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:56 Parameters OK 08:22:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:56 Set A/D data flow result=40 08:22:56 Set A/D channel type result=40 08:22:56 Set A/D encoding result=40 08:22:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:56 Set channel filter=0.000000e+000 result=40 08:22:56 Config A/D Result=40 08:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:56 Get A/D filter: -9.255963e+061 result=40 08:22:56 Get A/D value=-858993460 result=40 08:22:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:56 Parameters OK 08:22:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:56 Set A/D data flow result=40 08:22:56 Set A/D channel type result=40 08:22:56 Set A/D encoding result=40 08:22:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:56 Set channel filter=0.000000e+000 result=40 08:22:56 Config A/D Result=40 08:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:56 Get A/D filter: -9.255963e+061 result=40 08:22:56 Get A/D value=-858993460 result=40 08:22:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:56 Aux= 08:22:56 Message to Camera, serial 215365 queued 08:23:05 Received message from Master: op=Shutter serial=215375 08:23:05 Shutter LASER close 08:23:05 Received message from Master: op=PointingHead serial=215379 08:23:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:23:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:23:05 Point started: ret=0 08:23:05 point_skyscan result=0 08:23:06 Check angles 08:23:06 SkyScan query 08:23:07 SkyScan query done: ret=0 az=89.88<-5992 ze=157.215<-1519 Statuses=0009 0009 08:23:07 Msec=0 True Az=89.88 Ze=157.215 Az status=0009 Ze status=0009 08:23:07 Check angles 08:23:07 SkyScan query 08:23:08 SkyScan query done: ret=0 az=72.315<-4821 ze=136.29<-2914 Statuses=0009 0009 08:23:08 Msec=750 True Az=72.315 Ze=136.29 Az status=0009 Ze status=0009 08:23:08 Check angles 08:23:08 SkyScan query 08:23:08 SkyScan query done: ret=0 az=54.99<-3666 ze=115.35<-4310 Statuses=0009 0009 08:23:08 Msec=1500 True Az=54.99 Ze=115.35 Az status=0009 Ze status=0009 08:23:08 Check angles 08:23:08 SkyScan query 08:23:09 SkyScan query done: ret=0 az=40.95<-2730 ze=94.35<-5710 Statuses=0009 0009 08:23:09 Msec=2250 True Az=40.95 Ze=94.35 Az status=0009 Ze status=0009 08:23:09 Check angles 08:23:09 SkyScan query 08:23:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 08:23:10 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 08:23:10 Check angles 08:23:10 SkyScan query 08:23:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 08:23:11 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 08:23:11 Check angles 08:23:11 SkyScan query 08:23:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:23:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:23:11 Message to Master queued w/err=0: serial=215379 error=0 08:23:16 Received message from Master: op=Filter serial=215380 08:23:16 Color wheel filter change from 0 to 0 08:23:16 FLIGetFilterPos err=0 currentPosition=0 08:23:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:16 Filter is already there-color wheel unchanged 08:23:16 Received message from Master: op=Shutter serial=215381 08:23:16 Shutter LASER close 08:23:17 Received message from Camera: op=State serial=215383 08:23:17 GetSingleValue result=40 Value=cccccccc 08:23:17 SkyScan query 08:23:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:23:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:17 Parameters OK 08:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:17 Set A/D data flow result=40 08:23:17 Set A/D channel type result=40 08:23:17 Set A/D encoding result=40 08:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:17 Set channel filter=0.000000e+000 result=40 08:23:17 Config A/D Result=40 08:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:17 Get A/D filter: -9.255963e+061 result=40 08:23:17 Get A/D value=-858993460 result=40 08:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:17 Parameters OK 08:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:17 Set A/D data flow result=40 08:23:17 Set A/D channel type result=40 08:23:17 Set A/D encoding result=40 08:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:17 Set channel filter=0.000000e+000 result=40 08:23:17 Config A/D Result=40 08:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:17 Get A/D filter: -9.255963e+061 result=40 08:23:17 Get A/D value=-858993460 result=40 08:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:17 Aux= 08:23:17 Message to Camera, serial 215383 queued 08:23:54 Received message from Master: op=PointingHead serial=215396 08:23:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:23:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:23:54 Point started: ret=0 08:23:54 point_skyscan result=0 08:23:55 Check angles 08:23:55 SkyScan query 08:23:56 SkyScan query done: ret=0 az=64.215<-4281 ze=66.51<-7566 Statuses=0009 0008 08:23:56 Msec=0 True Az=64.215 Ze=66.51 Az status=0009 Ze status=0008 08:23:56 Check angles 08:23:56 SkyScan query 08:23:57 SkyScan query done: ret=0 az=81.675<-5445 ze=66.51<-7566 Statuses=0009 0008 08:23:57 Msec=750 True Az=81.675 Ze=66.51 Az status=0009 Ze status=0008 08:23:57 Check angles 08:23:57 SkyScan query 08:23:57 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 08:23:57 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 08:23:57 Check angles 08:23:57 SkyScan query 08:23:58 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 08:23:58 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 08:23:58 Check angles 08:23:58 SkyScan query 08:23:59 SkyScan query done: ret=0 az=134.115<-8941 ze=66.495<-7567 Statuses=0009 0008 08:23:59 Msec=3000 True Az=134.115 Ze=66.495 Az status=0009 Ze status=0008 08:23:59 Check angles 08:23:59 SkyScan query 08:24:00 SkyScan query done: ret=0 az=151.47<-10098 ze=66.495<-7567 Statuses=0009 0008 08:24:00 Msec=3750 True Az=151.47 Ze=66.495 Az status=0009 Ze status=0008 08:24:00 Check angles 08:24:00 SkyScan query 08:24:00 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:24:00 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:24:00 Message to Master queued w/err=0: serial=215396 error=0 08:24:05 Received message from Master: op=Filter serial=215397 08:24:05 Color wheel filter change from 0 to 0 08:24:05 FLIGetFilterPos err=0 currentPosition=0 08:24:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:05 Filter is already there-color wheel unchanged 08:24:05 Received message from Master: op=Shutter serial=215398 08:24:05 Shutter LASER close 08:24:05 Received message from Camera: op=State serial=215400 08:24:05 GetSingleValue result=40 Value=cccccccc 08:24:05 SkyScan query 08:24:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:24:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:06 Parameters OK 08:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:06 Set A/D data flow result=40 08:24:06 Set A/D channel type result=40 08:24:06 Set A/D encoding result=40 08:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:06 Set channel filter=0.000000e+000 result=40 08:24:06 Config A/D Result=40 08:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:06 Get A/D filter: -9.255963e+061 result=40 08:24:06 Get A/D value=-858993460 result=40 08:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:06 Parameters OK 08:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:06 Set A/D data flow result=40 08:24:06 Set A/D channel type result=40 08:24:06 Set A/D encoding result=40 08:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:06 Set channel filter=0.000000e+000 result=40 08:24:06 Config A/D Result=40 08:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:06 Get A/D filter: -9.255963e+061 result=40 08:24:06 Get A/D value=-858993460 result=40 08:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:06 Aux= 08:24:06 Message to Camera, serial 215400 queued 08:24:43 Received message from Master: op=PointingHead serial=215413 08:24:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:24:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:24:43 Point started: ret=0 08:24:43 point_skyscan result=0 08:24:44 Check angles 08:24:44 SkyScan query 08:24:45 SkyScan query done: ret=0 az=134.805<-8987 ze=96.435<-5571 Statuses=0009 0009 08:24:45 Msec=0 True Az=134.805 Ze=96.435 Az status=0009 Ze status=0009 08:24:45 Check angles 08:24:45 SkyScan query 08:24:45 SkyScan query done: ret=0 az=130.995<-8733 ze=117.81<-4146 Statuses=0008 0009 08:24:45 Msec=750 True Az=130.995 Ze=117.81 Az status=0008 Ze status=0009 08:24:46 Check angles 08:24:46 SkyScan query 08:24:46 SkyScan query done: ret=0 az=130.995<-8733 ze=138.765<-2749 Statuses=0008 0009 08:24:46 Msec=1500 True Az=130.995 Ze=138.765 Az status=0008 Ze status=0009 08:24:46 Check angles 08:24:46 SkyScan query 08:24:47 SkyScan query done: ret=0 az=130.995<-8733 ze=159.72<-1352 Statuses=0008 0009 08:24:47 Msec=2250 True Az=130.995 Ze=159.72 Az status=0008 Ze status=0009 08:24:47 Check angles 08:24:47 SkyScan query 08:24:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.875<-23925 Statuses=0008 0009 08:24:48 Msec=3000 True Az=130.995 Ze=-178.875 Az status=0008 Ze status=0009 08:24:48 Check angles 08:24:48 SkyScan query 08:24:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.515<-22501 Statuses=0008 0009 08:24:48 Msec=3750 True Az=130.995 Ze=-157.515 Az status=0008 Ze status=0009 08:24:49 Check angles 08:24:49 SkyScan query 08:24:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 08:24:49 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 08:24:49 Check angles 08:24:49 SkyScan query 08:24:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:24:50 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:24:50 Message to Master queued w/err=0: serial=215413 error=0 08:24:55 Received message from Master: op=Filter serial=215414 08:24:55 Color wheel filter change from 0 to 0 08:24:55 FLIGetFilterPos err=0 currentPosition=0 08:24:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:55 Filter is already there-color wheel unchanged 08:24:55 Received message from Master: op=Shutter serial=215415 08:24:55 Shutter LASER close 08:24:55 Received message from Camera: op=State serial=215417 08:24:55 GetSingleValue result=40 Value=cccccccc 08:24:55 SkyScan query 08:24:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:24:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:56 Parameters OK 08:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:56 Set A/D data flow result=40 08:24:56 Set A/D channel type result=40 08:24:56 Set A/D encoding result=40 08:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:56 Set channel filter=0.000000e+000 result=40 08:24:56 Config A/D Result=40 08:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:56 Get A/D filter: -9.255963e+061 result=40 08:24:56 Get A/D value=-858993460 result=40 08:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:56 Parameters OK 08:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:56 Set A/D data flow result=40 08:24:56 Set A/D channel type result=40 08:24:56 Set A/D encoding result=40 08:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:56 Set channel filter=0.000000e+000 result=40 08:24:56 Config A/D Result=40 08:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:56 Get A/D filter: -9.255963e+061 result=40 08:24:56 Get A/D value=-858993460 result=40 08:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:56 Aux= 08:24:56 Message to Camera, serial 215417 queued 08:25:33 Received message from Master: op=PointingHead serial=215430 08:25:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:25:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:25:33 Point started: ret=0 08:25:33 point_skyscan result=0 08:25:34 Check angles 08:25:34 SkyScan query 08:25:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 08:25:34 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 08:25:34 Check angles 08:25:34 SkyScan query 08:25:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:25:35 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:25:35 Message to Master queued w/err=0: serial=215430 error=0 08:25:40 Received message from Master: op=Filter serial=215431 08:25:40 Color wheel filter change from 0 to 0 08:25:40 FLIGetFilterPos err=0 currentPosition=0 08:25:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:40 Filter is already there-color wheel unchanged 08:25:40 Received message from Master: op=Shutter serial=215432 08:25:40 Shutter LASER open 08:25:40 Received message from Camera: op=State serial=215434 08:25:40 GetSingleValue result=40 Value=cccccccc 08:25:40 SkyScan query 08:25:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:25:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:41 Parameters OK 08:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:41 Set A/D data flow result=40 08:25:41 Set A/D channel type result=40 08:25:41 Set A/D encoding result=40 08:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:41 Set channel filter=0.000000e+000 result=40 08:25:41 Config A/D Result=40 08:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:41 Get A/D filter: -9.255963e+061 result=40 08:25:41 Get A/D value=-858993460 result=40 08:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:41 Parameters OK 08:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:41 Set A/D data flow result=40 08:25:41 Set A/D channel type result=40 08:25:41 Set A/D encoding result=40 08:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:41 Set channel filter=0.000000e+000 result=40 08:25:41 Config A/D Result=40 08:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:41 Get A/D filter: -9.255963e+061 result=40 08:25:41 Get A/D value=-858993460 result=40 08:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:41 Aux= [UTC 2018-12-17 08:25:41] 08:25:41 Message to Camera, serial 215434 queued 08:25:49 Received message from Master: op=Shutter serial=215444 08:25:49 Shutter LASER close 08:25:50 Received message from Master: op=PointingHead serial=215448 08:25:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:25:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:25:50 Point started: ret=0 08:25:50 point_skyscan result=0 08:25:51 Check angles 08:25:51 SkyScan query 08:25:52 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.535<-21569 Statuses=0009 0009 08:25:52 Msec=0 True Az=135.72 Ze=-143.535 Az status=0009 Ze status=0009 08:25:52 Check angles 08:25:52 SkyScan query 08:25:52 SkyScan query done: ret=0 az=153.315<-10221 ze=-122.55<-20170 Statuses=0009 0009 08:25:52 Msec=750 True Az=153.315 Ze=-122.55 Az status=0009 Ze status=0009 08:25:53 Check angles 08:25:53 SkyScan query 08:25:53 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.67<-18778 Statuses=0009 0009 08:25:53 Msec=1500 True Az=170.745 Ze=-101.67 Az status=0009 Ze status=0009 08:25:53 Check angles 08:25:53 SkyScan query 08:25:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.61<-17374 Statuses=0008 0009 08:25:54 Msec=2250 True Az=175.995 Ze=-80.61 Az status=0008 Ze status=0009 08:25:54 Check angles 08:25:54 SkyScan query 08:25:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.7<-15980 Statuses=0008 0009 08:25:55 Msec=3000 True Az=175.995 Ze=-59.7 Az status=0008 Ze status=0009 08:25:55 Check angles 08:25:55 SkyScan query 08:25:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:25:55 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:25:55 Message to Master queued w/err=0: serial=215448 error=0 08:26:00 Received message from Master: op=Filter serial=215449 08:26:00 Color wheel filter change from 0 to 0 08:26:00 FLIGetFilterPos err=0 currentPosition=0 08:26:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:00 Filter is already there-color wheel unchanged 08:26:01 Received message from Master: op=Shutter serial=215450 08:26:01 Shutter LASER close 08:26:01 Received message from Camera: op=State serial=215452 08:26:01 GetSingleValue result=40 Value=cccccccc 08:26:01 SkyScan query 08:26:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:26:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:01 Parameters OK 08:26:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:01 Set A/D data flow result=40 08:26:01 Set A/D channel type result=40 08:26:01 Set A/D encoding result=40 08:26:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:01 Set channel filter=0.000000e+000 result=40 08:26:01 Config A/D Result=40 08:26:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:01 Get A/D filter: -9.255963e+061 result=40 08:26:01 Get A/D value=-858993460 result=40 08:26:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:01 Parameters OK 08:26:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:01 Set A/D data flow result=40 08:26:01 Set A/D channel type result=40 08:26:01 Set A/D encoding result=40 08:26:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:01 Set channel filter=0.000000e+000 result=40 08:26:01 Config A/D Result=40 08:26:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:01 Get A/D filter: -9.255963e+061 result=40 08:26:01 Get A/D value=-858993460 result=40 08:26:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:01 Aux= 08:26:01 Message to Camera, serial 215452 queued 08:26:38 Received message from Master: op=PointingHead serial=215465 08:26:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:26:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:26:39 Point started: ret=0 08:26:39 point_skyscan result=0 08:26:39 Check angles 08:26:39 SkyScan query 08:26:40 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.065<-13471 Statuses=0009 0009 08:26:40 Msec=0 True Az=153.21 Ze=-22.065 Az status=0009 Ze status=0009 08:26:40 Check angles 08:26:40 SkyScan query 08:26:41 SkyScan query done: ret=0 az=135.795<-9053 ze=-1.065<-12071 Statuses=0009 0009 08:26:41 Msec=750 True Az=135.795 Ze=-1.065 Az status=0009 Ze status=0009 08:26:41 Check angles 08:26:41 SkyScan query 08:26:41 SkyScan query done: ret=0 az=118.26<-7884 ze=19.845<-10677 Statuses=0009 0009 08:26:41 Msec=1500 True Az=118.26 Ze=19.845 Az status=0009 Ze status=0009 08:26:42 Check angles 08:26:42 SkyScan query 08:26:42 SkyScan query done: ret=0 az=100.845<-6723 ze=40.86<-9276 Statuses=0009 0009 08:26:42 Msec=2250 True Az=100.845 Ze=40.86 Az status=0009 Ze status=0009 08:26:42 Check angles 08:26:42 SkyScan query 08:26:43 SkyScan query done: ret=0 az=85.95<-5730 ze=51.6<-8560 Statuses=0009 0008 08:26:43 Msec=3000 True Az=85.95 Ze=51.6 Az status=0009 Ze status=0008 08:26:43 Check angles 08:26:43 SkyScan query 08:26:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:26:44 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:26:44 Message to Master queued w/err=0: serial=215465 error=0 08:26:49 Received message from Master: op=Filter serial=215466 08:26:49 Color wheel filter change from 0 to 0 08:26:49 FLIGetFilterPos err=0 currentPosition=0 08:26:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:49 Filter is already there-color wheel unchanged 08:26:49 Received message from Master: op=Shutter serial=215467 08:26:49 Shutter LASER close 08:26:49 Received message from Camera: op=State serial=215469 08:26:49 GetSingleValue result=40 Value=cccccccc 08:26:49 SkyScan query 08:26:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:26:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:49 Parameters OK 08:26:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:49 Set A/D data flow result=40 08:26:49 Set A/D channel type result=40 08:26:49 Set A/D encoding result=40 08:26:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:49 Set channel filter=0.000000e+000 result=40 08:26:49 Config A/D Result=40 08:26:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:49 Get A/D filter: -9.255963e+061 result=40 08:26:49 Get A/D value=-858993460 result=40 08:26:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:49 Parameters OK 08:26:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:49 Set A/D data flow result=40 08:26:49 Set A/D channel type result=40 08:26:49 Set A/D encoding result=40 08:26:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:49 Set channel filter=0.000000e+000 result=40 08:26:49 Config A/D Result=40 08:26:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:49 Get A/D filter: -9.255963e+061 result=40 08:26:49 Get A/D value=-858993460 result=40 08:26:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:49 Aux= 08:26:49 Message to Camera, serial 215469 queued 08:27:26 Received message from Master: op=PointingHead serial=215482 08:27:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:27:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:27:27 Point started: ret=0 08:27:27 point_skyscan result=0 08:27:27 Check angles 08:27:27 SkyScan query 08:27:28 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 08:27:28 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 08:27:28 Check angles 08:27:28 SkyScan query 08:27:29 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 08:27:29 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 08:27:29 Check angles 08:27:29 SkyScan query 08:27:29 SkyScan query done: ret=0 az=144.3<-9620 ze=38.505<-9433 Statuses=0009 0008 08:27:29 Msec=1500 True Az=144.3 Ze=38.505 Az status=0009 Ze status=0008 08:27:30 Check angles 08:27:30 SkyScan query 08:27:30 SkyScan query done: ret=0 az=162.03<-10802 ze=38.505<-9433 Statuses=0009 0008 08:27:30 Msec=2250 True Az=162.03 Ze=38.505 Az status=0009 Ze status=0008 08:27:30 Check angles 08:27:30 SkyScan query 08:27:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 08:27:31 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 08:27:31 Check angles 08:27:31 SkyScan query 08:27:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:27:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:27:32 Message to Master queued w/err=0: serial=215482 error=0 08:27:37 Received message from Master: op=Filter serial=215483 08:27:37 Color wheel filter change from 0 to 0 08:27:37 FLIGetFilterPos err=0 currentPosition=0 08:27:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:37 Filter is already there-color wheel unchanged 08:27:37 Received message from Master: op=Shutter serial=215484 08:27:37 Shutter LASER close 08:27:37 Received message from Camera: op=State serial=215486 08:27:37 GetSingleValue result=40 Value=cccccccc 08:27:37 SkyScan query 08:27:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:27:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:38 Parameters OK 08:27:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:38 Set A/D data flow result=40 08:27:38 Set A/D channel type result=40 08:27:38 Set A/D encoding result=40 08:27:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:38 Set channel filter=0.000000e+000 result=40 08:27:38 Config A/D Result=40 08:27:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:38 Get A/D filter: -9.255963e+061 result=40 08:27:38 Get A/D value=-858993460 result=40 08:27:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:38 Parameters OK 08:27:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:38 Set A/D data flow result=40 08:27:38 Set A/D channel type result=40 08:27:38 Set A/D encoding result=40 08:27:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:38 Set channel filter=0.000000e+000 result=40 08:27:38 Config A/D Result=40 08:27:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:38 Get A/D filter: -9.255963e+061 result=40 08:27:38 Get A/D value=-858993460 result=40 08:27:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:38 Aux= 08:27:38 Message to Camera, serial 215486 queued 08:28:14 Received message from Master: op=PointingHead serial=215499 08:28:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:28:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:28:15 Point started: ret=0 08:28:15 point_skyscan result=0 08:28:15 Check angles 08:28:15 SkyScan query 08:28:16 SkyScan query done: ret=0 az=152.655<-10177 ze=8.115<-11459 Statuses=0009 0009 08:28:16 Msec=0 True Az=152.655 Ze=8.115 Az status=0009 Ze status=0009 08:28:16 Check angles 08:28:16 SkyScan query 08:28:17 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.735<-12849 Statuses=0009 0009 08:28:17 Msec=750 True Az=135.12 Ze=-12.735 Az status=0009 Ze status=0009 08:28:17 Check angles 08:28:17 SkyScan query 08:28:18 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.765<-14251 Statuses=0009 0009 08:28:18 Msec=1500 True Az=117.615 Ze=-33.765 Az status=0009 Ze status=0009 08:28:18 Check angles 08:28:18 SkyScan query 08:28:18 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.555<-15437 Statuses=0009 0009 08:28:18 Msec=2250 True Az=100.245 Ze=-51.555 Az status=0009 Ze status=0009 08:28:18 Check angles 08:28:18 SkyScan query 08:28:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:28:19 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:28:19 Check angles 08:28:19 SkyScan query 08:28:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:28:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:28:20 Message to Master queued w/err=0: serial=215499 error=0 08:28:25 Received message from Master: op=Filter serial=215500 08:28:25 Color wheel filter change from 0 to 0 08:28:25 FLIGetFilterPos err=0 currentPosition=0 08:28:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:25 Filter is already there-color wheel unchanged 08:28:25 Received message from Master: op=Shutter serial=215501 08:28:25 Shutter LASER close 08:28:25 Received message from Camera: op=State serial=215503 08:28:25 GetSingleValue result=40 Value=cccccccc 08:28:25 SkyScan query 08:28:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:28:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:26 Parameters OK 08:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:26 Set A/D data flow result=40 08:28:26 Set A/D channel type result=40 08:28:26 Set A/D encoding result=40 08:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:26 Set channel filter=0.000000e+000 result=40 08:28:26 Config A/D Result=40 08:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:26 Get A/D filter: -9.255963e+061 result=40 08:28:26 Get A/D value=-858993460 result=40 08:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:26 Parameters OK 08:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:26 Set A/D data flow result=40 08:28:26 Set A/D channel type result=40 08:28:26 Set A/D encoding result=40 08:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:26 Set channel filter=0.000000e+000 result=40 08:28:26 Config A/D Result=40 08:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:26 Get A/D filter: -9.255963e+061 result=40 08:28:26 Get A/D value=-858993460 result=40 08:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:26 Aux= 08:28:26 Message to Camera, serial 215503 queued 08:29:02 Received message from Master: op=PointingHead serial=215516 08:29:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:29:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:29:03 Point started: ret=0 08:29:03 point_skyscan result=0 08:29:04 Check angles 08:29:04 SkyScan query 08:29:04 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.495<-17433 Statuses=0009 0009 08:29:04 Msec=0 True Az=109.155 Ze=-81.495 Az status=0009 Ze status=0009 08:29:04 Check angles 08:29:04 SkyScan query 08:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 08:29:05 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 08:29:05 Check angles 08:29:05 SkyScan query 08:29:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 08:29:06 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 08:29:06 Check angles 08:29:06 SkyScan query 08:29:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 08:29:06 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 08:29:07 Check angles 08:29:07 SkyScan query 08:29:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 08:29:07 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 08:29:07 Check angles 08:29:07 SkyScan query 08:29:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:29:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:29:08 Message to Master queued w/err=0: serial=215516 error=0 08:29:13 Received message from Master: op=Filter serial=215517 08:29:13 Color wheel filter change from 0 to 0 08:29:13 FLIGetFilterPos err=0 currentPosition=0 08:29:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:13 Filter is already there-color wheel unchanged 08:29:13 Received message from Master: op=Shutter serial=215518 08:29:13 Shutter LASER open 08:29:13 Received message from Camera: op=State serial=215520 08:29:13 GetSingleValue result=40 Value=cccccccc 08:29:13 SkyScan query 08:29:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:29:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:14 Parameters OK 08:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:14 Set A/D data flow result=40 08:29:14 Set A/D channel type result=40 08:29:14 Set A/D encoding result=40 08:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:14 Set channel filter=0.000000e+000 result=40 08:29:14 Config A/D Result=40 08:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:14 Get A/D filter: -9.255963e+061 result=40 08:29:14 Get A/D value=-858993460 result=40 08:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:14 Parameters OK 08:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:14 Set A/D data flow result=40 08:29:14 Set A/D channel type result=40 08:29:14 Set A/D encoding result=40 08:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:14 Set channel filter=0.000000e+000 result=40 08:29:14 Config A/D Result=40 08:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:14 Get A/D filter: -9.255963e+061 result=40 08:29:14 Get A/D value=-858993460 result=40 08:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:14 Aux= 08:29:14 Message to Camera, serial 215520 queued 08:29:22 Received message from Master: op=Shutter serial=215530 08:29:22 Shutter LASER close 08:29:23 Received message from Master: op=PointingHead serial=215534 08:29:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:29:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:29:23 Point started: ret=0 08:29:23 point_skyscan result=0 08:29:24 Check angles 08:29:24 SkyScan query 08:29:24 SkyScan query done: ret=0 az=89.82<-5988 ze=157.275<-1515 Statuses=0009 0009 08:29:24 Msec=0 True Az=89.82 Ze=157.275 Az status=0009 Ze status=0009 08:29:25 Check angles 08:29:25 SkyScan query 08:29:25 SkyScan query done: ret=0 az=72.285<-4819 ze=136.305<-2913 Statuses=0009 0009 08:29:25 Msec=750 True Az=72.285 Ze=136.305 Az status=0009 Ze status=0009 08:29:25 Check angles 08:29:25 SkyScan query 08:29:26 SkyScan query done: ret=0 az=54.945<-3663 ze=115.38<-4308 Statuses=0009 0009 08:29:26 Msec=1500 True Az=54.945 Ze=115.38 Az status=0009 Ze status=0009 08:29:26 Check angles 08:29:26 SkyScan query 08:29:27 SkyScan query done: ret=0 az=40.965<-2731 ze=93.975<-5735 Statuses=0009 0009 08:29:27 Msec=2250 True Az=40.965 Ze=93.975 Az status=0009 Ze status=0009 08:29:27 Check angles 08:29:27 SkyScan query 08:29:27 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 08:29:27 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 08:29:28 Check angles 08:29:28 SkyScan query 08:29:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 08:29:28 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 08:29:28 Check angles 08:29:28 SkyScan query 08:29:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:29:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:29:29 Message to Master queued w/err=0: serial=215534 error=0 08:29:34 Received message from Master: op=Filter serial=215535 08:29:34 Color wheel filter change from 0 to 0 08:29:34 FLIGetFilterPos err=0 currentPosition=0 08:29:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:34 Filter is already there-color wheel unchanged 08:29:34 Received message from Master: op=Shutter serial=215536 08:29:34 Shutter LASER close 08:29:34 Received message from Camera: op=State serial=215538 08:29:34 GetSingleValue result=40 Value=cccccccc 08:29:34 SkyScan query 08:29:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:35 Parameters OK 08:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:35 Set A/D data flow result=40 08:29:35 Set A/D channel type result=40 08:29:35 Set A/D encoding result=40 08:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:35 Set channel filter=0.000000e+000 result=40 08:29:35 Config A/D Result=40 08:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:35 Get A/D filter: -9.255963e+061 result=40 08:29:35 Get A/D value=-858993460 result=40 08:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:35 Parameters OK 08:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:35 Set A/D data flow result=40 08:29:35 Set A/D channel type result=40 08:29:35 Set A/D encoding result=40 08:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:35 Set channel filter=0.000000e+000 result=40 08:29:35 Config A/D Result=40 08:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:35 Get A/D filter: -9.255963e+061 result=40 08:29:35 Get A/D value=-858993460 result=40 08:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:35 Aux= 08:29:35 Message to Camera, serial 215538 queued 08:30:12 Received message from Master: op=PointingHead serial=215551 08:30:12 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:30:12 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:30:12 Point started: ret=0 08:30:12 point_skyscan result=0 08:30:13 Check angles 08:30:13 SkyScan query 08:30:13 SkyScan query done: ret=0 az=64.17<-4278 ze=66.51<-7566 Statuses=0009 0008 08:30:13 Msec=0 True Az=64.17 Ze=66.51 Az status=0009 Ze status=0008 08:30:13 Check angles 08:30:13 SkyScan query 08:30:14 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 08:30:14 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 08:30:14 Check angles 08:30:14 SkyScan query 08:30:15 SkyScan query done: ret=0 az=99.09<-6606 ze=66.495<-7567 Statuses=0009 0008 08:30:15 Msec=1500 True Az=99.09 Ze=66.495 Az status=0009 Ze status=0008 08:30:15 Check angles 08:30:15 SkyScan query 08:30:16 SkyScan query done: ret=0 az=116.505<-7767 ze=66.495<-7567 Statuses=0009 0008 08:30:16 Msec=2250 True Az=116.505 Ze=66.495 Az status=0009 Ze status=0008 08:30:16 Check angles 08:30:16 SkyScan query 08:30:16 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 08:30:16 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 08:30:16 Check angles 08:30:16 SkyScan query 08:30:17 SkyScan query done: ret=0 az=151.38<-10092 ze=66.495<-7567 Statuses=0009 0008 08:30:17 Msec=3750 True Az=151.38 Ze=66.495 Az status=0009 Ze status=0008 08:30:17 Check angles 08:30:17 SkyScan query 08:30:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:30:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:30:18 Message to Master queued w/err=0: serial=215551 error=0 08:30:23 Received message from Master: op=Filter serial=215552 08:30:23 Color wheel filter change from 0 to 0 08:30:23 FLIGetFilterPos err=0 currentPosition=0 08:30:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:23 Filter is already there-color wheel unchanged 08:30:23 Received message from Master: op=Shutter serial=215553 08:30:23 Shutter LASER close 08:30:23 Received message from Camera: op=State serial=215555 08:30:23 GetSingleValue result=40 Value=cccccccc 08:30:23 SkyScan query 08:30:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:30:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:24 Parameters OK 08:30:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:24 Set A/D data flow result=40 08:30:24 Set A/D channel type result=40 08:30:24 Set A/D encoding result=40 08:30:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:24 Set channel filter=0.000000e+000 result=40 08:30:24 Config A/D Result=40 08:30:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:24 Get A/D filter: -9.255963e+061 result=40 08:30:24 Get A/D value=-858993460 result=40 08:30:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:24 Parameters OK 08:30:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:24 Set A/D data flow result=40 08:30:24 Set A/D channel type result=40 08:30:24 Set A/D encoding result=40 08:30:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:24 Set channel filter=0.000000e+000 result=40 08:30:24 Config A/D Result=40 08:30:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:24 Get A/D filter: -9.255963e+061 result=40 08:30:24 Get A/D value=-858993460 result=40 08:30:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:24 Aux= 08:30:24 Message to Camera, serial 215555 queued 08:31:01 Received message from Master: op=PointingHead serial=215568 08:31:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:31:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:31:01 Point started: ret=0 08:31:01 point_skyscan result=0 08:31:02 Check angles 08:31:02 SkyScan query 08:31:02 SkyScan query done: ret=0 az=134.835<-8989 ze=96.255<-5583 Statuses=0009 0009 08:31:02 Msec=0 True Az=134.835 Ze=96.255 Az status=0009 Ze status=0009 08:31:03 Check angles 08:31:03 SkyScan query 08:31:03 SkyScan query done: ret=0 az=130.995<-8733 ze=117.21<-4186 Statuses=0008 0009 08:31:03 Msec=750 True Az=130.995 Ze=117.21 Az status=0008 Ze status=0009 08:31:03 Check angles 08:31:03 SkyScan query 08:31:04 SkyScan query done: ret=0 az=130.995<-8733 ze=138.105<-2793 Statuses=0008 0009 08:31:04 Msec=1500 True Az=130.995 Ze=138.105 Az status=0008 Ze status=0009 08:31:04 Check angles 08:31:04 SkyScan query 08:31:05 SkyScan query done: ret=0 az=130.995<-8733 ze=159.105<-1393 Statuses=0008 0009 08:31:05 Msec=2250 True Az=130.995 Ze=159.105 Az status=0008 Ze status=0009 08:31:05 Check angles 08:31:05 SkyScan query 08:31:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.97<-23998 Statuses=0008 0009 08:31:05 Msec=3000 True Az=130.995 Ze=-179.97 Az status=0008 Ze status=0009 08:31:06 Check angles 08:31:06 SkyScan query 08:31:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.985<-22599 Statuses=0008 0009 08:31:06 Msec=3750 True Az=130.995 Ze=-158.985 Az status=0008 Ze status=0009 08:31:06 Check angles 08:31:06 SkyScan query 08:31:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.405<-21427 Statuses=0008 0009 08:31:07 Msec=4500 True Az=130.995 Ze=-141.405 Az status=0008 Ze status=0009 08:31:07 Check angles 08:31:07 SkyScan query 08:31:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:31:08 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:31:08 Message to Master queued w/err=0: serial=215568 error=0 08:31:13 Received message from Master: op=Filter serial=215569 08:31:13 Color wheel filter change from 0 to 0 08:31:13 FLIGetFilterPos err=0 currentPosition=0 08:31:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:13 Filter is already there-color wheel unchanged 08:31:13 Received message from Master: op=Shutter serial=215570 08:31:13 Shutter LASER close 08:31:13 Received message from Camera: op=State serial=215572 08:31:13 GetSingleValue result=40 Value=cccccccc 08:31:13 SkyScan query 08:31:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:31:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:13 Parameters OK 08:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:13 Set A/D data flow result=40 08:31:13 Set A/D channel type result=40 08:31:13 Set A/D encoding result=40 08:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:13 Set channel filter=0.000000e+000 result=40 08:31:13 Config A/D Result=40 08:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:13 Get A/D filter: -9.255963e+061 result=40 08:31:13 Get A/D value=-858993460 result=40 08:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:13 Parameters OK 08:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:13 Set A/D data flow result=40 08:31:13 Set A/D channel type result=40 08:31:13 Set A/D encoding result=40 08:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:13 Set channel filter=0.000000e+000 result=40 08:31:13 Config A/D Result=40 08:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:13 Get A/D filter: -9.255963e+061 result=40 08:31:13 Get A/D value=-858993460 result=40 08:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:13 Aux= 08:31:13 Message to Camera, serial 215572 queued 08:31:50 Received message from Master: op=PointingHead serial=215585 08:31:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:31:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:31:51 Point started: ret=0 08:31:51 point_skyscan result=0 08:31:51 Check angles 08:31:51 SkyScan query 08:31:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 08:31:52 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 08:31:52 Check angles 08:31:52 SkyScan query 08:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:31:53 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:31:53 Message to Master queued w/err=0: serial=215585 error=0 08:31:58 Received message from Master: op=Filter serial=215586 08:31:58 Color wheel filter change from 0 to 0 08:31:58 FLIGetFilterPos err=0 currentPosition=0 08:31:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:58 Filter is already there-color wheel unchanged 08:31:58 Received message from Master: op=Shutter serial=215587 08:31:58 Shutter LASER open 08:31:58 Received message from Camera: op=State serial=215589 08:31:58 GetSingleValue result=40 Value=cccccccc 08:31:58 SkyScan query 08:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:31:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:59 Parameters OK 08:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:59 Set A/D data flow result=40 08:31:59 Set A/D channel type result=40 08:31:59 Set A/D encoding result=40 08:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:59 Set channel filter=0.000000e+000 result=40 08:31:59 Config A/D Result=40 08:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:59 Get A/D filter: -9.255963e+061 result=40 08:31:59 Get A/D value=-858993460 result=40 08:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:59 Parameters OK 08:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:59 Set A/D data flow result=40 08:31:59 Set A/D channel type result=40 08:31:59 Set A/D encoding result=40 08:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:59 Set channel filter=0.000000e+000 result=40 08:31:59 Config A/D Result=40 08:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:59 Get A/D filter: -9.255963e+061 result=40 08:31:59 Get A/D value=-858993460 result=40 08:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:59 Aux= 08:31:59 Message to Camera, serial 215589 queued 08:32:07 Received message from Master: op=Shutter serial=215599 08:32:07 Shutter LASER close 08:32:08 Received message from Master: op=PointingHead serial=215603 08:32:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:32:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:32:08 Point started: ret=0 08:32:08 point_skyscan result=0 08:32:09 Check angles 08:32:09 SkyScan query 08:32:09 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.265<-21551 Statuses=0009 0009 08:32:09 Msec=0 True Az=135.99 Ze=-143.265 Az status=0009 Ze status=0009 08:32:09 Check angles 08:32:09 SkyScan query 08:32:10 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.295<-20153 Statuses=0009 0009 08:32:10 Msec=750 True Az=153.51 Ze=-122.295 Az status=0009 Ze status=0009 08:32:10 Check angles 08:32:10 SkyScan query 08:32:11 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.43<-18762 Statuses=0009 0009 08:32:11 Msec=1500 True Az=170.985 Ze=-101.43 Az status=0009 Ze status=0009 08:32:11 Check angles 08:32:11 SkyScan query 08:32:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.4<-17360 Statuses=0008 0009 08:32:12 Msec=2250 True Az=175.995 Ze=-80.4 Az status=0008 Ze status=0009 08:32:12 Check angles 08:32:12 SkyScan query 08:32:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.01<-15934 Statuses=0008 0009 08:32:12 Msec=3000 True Az=175.995 Ze=-59.01 Az status=0008 Ze status=0009 08:32:12 Check angles 08:32:12 SkyScan query 08:32:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:32:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:32:13 Message to Master queued w/err=0: serial=215603 error=0 08:32:18 Received message from Master: op=Filter serial=215604 08:32:18 Color wheel filter change from 0 to 0 08:32:18 FLIGetFilterPos err=0 currentPosition=0 08:32:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:18 Filter is already there-color wheel unchanged 08:32:18 Received message from Master: op=Shutter serial=215605 08:32:18 Shutter LASER close 08:32:18 Received message from Camera: op=State serial=215607 08:32:18 GetSingleValue result=40 Value=cccccccc 08:32:18 SkyScan query 08:32:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:32:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:19 Parameters OK 08:32:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:19 Set A/D data flow result=40 08:32:19 Set A/D channel type result=40 08:32:19 Set A/D encoding result=40 08:32:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:19 Set channel filter=0.000000e+000 result=40 08:32:19 Config A/D Result=40 08:32:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:19 Get A/D filter: -9.255963e+061 result=40 08:32:19 Get A/D value=-858993460 result=40 08:32:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:19 Parameters OK 08:32:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:19 Set A/D data flow result=40 08:32:19 Set A/D channel type result=40 08:32:19 Set A/D encoding result=40 08:32:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:19 Set channel filter=0.000000e+000 result=40 08:32:19 Config A/D Result=40 08:32:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:19 Get A/D filter: -9.255963e+061 result=40 08:32:19 Get A/D value=-858993460 result=40 08:32:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:19 Aux= 08:32:19 Message to Camera, serial 215607 queued 08:32:56 Received message from Master: op=PointingHead serial=215620 08:32:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:32:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:32:56 Point started: ret=0 08:32:56 point_skyscan result=0 08:32:57 Check angles 08:32:57 SkyScan query 08:32:57 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.33<-13422 Statuses=0009 0009 08:32:57 Msec=0 True Az=152.655 Ze=-21.33 Az status=0009 Ze status=0009 08:32:58 Check angles 08:32:58 SkyScan query 08:32:58 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.345<-12023 Statuses=0009 0009 08:32:58 Msec=750 True Az=135.195 Ze=-0.345 Az status=0009 Ze status=0009 08:32:58 Check angles 08:32:58 SkyScan query 08:32:59 SkyScan query done: ret=0 az=117.6<-7840 ze=20.55<-10630 Statuses=0009 0009 08:32:59 Msec=1500 True Az=117.6 Ze=20.55 Az status=0009 Ze status=0009 08:32:59 Check angles 08:32:59 SkyScan query 08:33:00 SkyScan query done: ret=0 az=100.26<-6684 ze=41.55<-9230 Statuses=0009 0009 08:33:00 Msec=2250 True Az=100.26 Ze=41.55 Az status=0009 Ze status=0009 08:33:00 Check angles 08:33:00 SkyScan query 08:33:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.585<-8561 Statuses=0009 0008 08:33:00 Msec=3000 True Az=85.995 Ze=51.585 Az status=0009 Ze status=0008 08:33:01 Check angles 08:33:01 SkyScan query 08:33:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:33:01 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:33:01 Message to Master queued w/err=0: serial=215620 error=0 08:33:06 Received message from Master: op=Filter serial=215621 08:33:06 Color wheel filter change from 0 to 0 08:33:06 FLIGetFilterPos err=0 currentPosition=0 08:33:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:06 Filter is already there-color wheel unchanged 08:33:06 Received message from Master: op=Shutter serial=215622 08:33:06 Shutter LASER close 08:33:06 Received message from Camera: op=State serial=215624 08:33:06 GetSingleValue result=40 Value=cccccccc 08:33:06 SkyScan query 08:33:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:33:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:07 Parameters OK 08:33:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:07 Set A/D data flow result=40 08:33:07 Set A/D channel type result=40 08:33:07 Set A/D encoding result=40 08:33:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:07 Set channel filter=0.000000e+000 result=40 08:33:07 Config A/D Result=40 08:33:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:07 Get A/D filter: -9.255963e+061 result=40 08:33:07 Get A/D value=-858993460 result=40 08:33:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:07 Parameters OK 08:33:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:07 Set A/D data flow result=40 08:33:07 Set A/D channel type result=40 08:33:07 Set A/D encoding result=40 08:33:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:07 Set channel filter=0.000000e+000 result=40 08:33:07 Config A/D Result=40 08:33:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:07 Get A/D filter: -9.255963e+061 result=40 08:33:07 Get A/D value=-858993460 result=40 08:33:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:07 Aux= 08:33:07 Message to Camera, serial 215624 queued 08:33:44 Received message from Master: op=PointingHead serial=215637 08:33:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:33:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:33:44 Point started: ret=0 08:33:44 point_skyscan result=0 08:33:45 Check angles 08:33:45 SkyScan query 08:33:46 SkyScan query done: ret=0 az=108.75<-7250 ze=38.49<-9434 Statuses=0009 0008 08:33:46 Msec=0 True Az=108.75 Ze=38.49 Az status=0009 Ze status=0008 08:33:46 Check angles 08:33:46 SkyScan query 08:33:46 SkyScan query done: ret=0 az=126.45<-8430 ze=38.505<-9433 Statuses=0009 0008 08:33:46 Msec=750 True Az=126.45 Ze=38.505 Az status=0009 Ze status=0008 08:33:46 Check angles 08:33:46 SkyScan query 08:33:47 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 08:33:47 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 08:33:47 Check angles 08:33:47 SkyScan query 08:33:48 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 08:33:48 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 08:33:48 Check angles 08:33:48 SkyScan query 08:33:49 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:33:49 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:33:49 Check angles 08:33:49 SkyScan query 08:33:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:33:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:33:49 Message to Master queued w/err=0: serial=215637 error=0 08:33:54 Received message from Master: op=Filter serial=215638 08:33:54 Color wheel filter change from 0 to 0 08:33:54 FLIGetFilterPos err=0 currentPosition=0 08:33:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:54 Filter is already there-color wheel unchanged 08:33:54 Received message from Master: op=Shutter serial=215639 08:33:54 Shutter LASER close 08:33:54 Received message from Camera: op=State serial=215641 08:33:54 GetSingleValue result=40 Value=cccccccc 08:33:54 SkyScan query 08:33:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:33:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:55 Parameters OK 08:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:55 Set A/D data flow result=40 08:33:55 Set A/D channel type result=40 08:33:55 Set A/D encoding result=40 08:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:55 Set channel filter=0.000000e+000 result=40 08:33:55 Config A/D Result=40 08:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:55 Get A/D filter: -9.255963e+061 result=40 08:33:55 Get A/D value=-858993460 result=40 08:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:55 Parameters OK 08:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:55 Set A/D data flow result=40 08:33:55 Set A/D channel type result=40 08:33:55 Set A/D encoding result=40 08:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:55 Set channel filter=0.000000e+000 result=40 08:33:55 Config A/D Result=40 08:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:55 Get A/D filter: -9.255963e+061 result=40 08:33:55 Get A/D value=-858993460 result=40 08:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:55 Aux= 08:33:55 Message to Camera, serial 215641 queued 08:34:32 Received message from Master: op=PointingHead serial=215654 08:34:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:34:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:34:32 Point started: ret=0 08:34:32 point_skyscan result=0 08:34:33 Check angles 08:34:33 SkyScan query 08:34:34 SkyScan query done: ret=0 az=152.67<-10178 ze=8.145<-11457 Statuses=0009 0009 08:34:34 Msec=0 True Az=152.67 Ze=8.145 Az status=0009 Ze status=0009 08:34:34 Check angles 08:34:34 SkyScan query 08:34:34 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.69<-12846 Statuses=0009 0009 08:34:34 Msec=750 True Az=135.135 Ze=-12.69 Az status=0009 Ze status=0009 08:34:34 Check angles 08:34:34 SkyScan query 08:34:35 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.72<-14248 Statuses=0009 0009 08:34:35 Msec=1500 True Az=117.615 Ze=-33.72 Az status=0009 Ze status=0009 08:34:35 Check angles 08:34:35 SkyScan query 08:34:36 SkyScan query done: ret=0 az=99.87<-6658 ze=-51.57<-15438 Statuses=0009 0009 08:34:36 Msec=2250 True Az=99.87 Ze=-51.57 Az status=0009 Ze status=0009 08:34:36 Check angles 08:34:36 SkyScan query 08:34:37 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:34:37 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:34:37 Check angles 08:34:37 SkyScan query 08:34:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:34:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:34:37 Message to Master queued w/err=0: serial=215654 error=0 08:34:42 Received message from Master: op=Filter serial=215655 08:34:42 Color wheel filter change from 0 to 0 08:34:42 FLIGetFilterPos err=0 currentPosition=0 08:34:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:42 Filter is already there-color wheel unchanged 08:34:43 Received message from Master: op=Shutter serial=215656 08:34:43 Shutter LASER close 08:34:43 Received message from Camera: op=State serial=215658 08:34:43 GetSingleValue result=40 Value=cccccccc 08:34:43 SkyScan query 08:34:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:34:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:43 Parameters OK 08:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:43 Set A/D data flow result=40 08:34:43 Set A/D channel type result=40 08:34:43 Set A/D encoding result=40 08:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:43 Set channel filter=0.000000e+000 result=40 08:34:43 Config A/D Result=40 08:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:43 Get A/D filter: -9.255963e+061 result=40 08:34:43 Get A/D value=-858993460 result=40 08:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:43 Parameters OK 08:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:43 Set A/D data flow result=40 08:34:43 Set A/D channel type result=40 08:34:43 Set A/D encoding result=40 08:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:43 Set channel filter=0.000000e+000 result=40 08:34:43 Config A/D Result=40 08:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:43 Get A/D filter: -9.255963e+061 result=40 08:34:43 Get A/D value=-858993460 result=40 08:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:43 Aux= 08:34:43 Message to Camera, serial 215658 queued 08:35:20 Received message from Master: op=PointingHead serial=215671 08:35:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:35:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:35:20 Point started: ret=0 08:35:20 point_skyscan result=0 08:35:21 Check angles 08:35:21 SkyScan query 08:35:22 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.495<-17433 Statuses=0009 0009 08:35:22 Msec=0 True Az=109.185 Ze=-81.495 Az status=0009 Ze status=0009 08:35:22 Check angles 08:35:22 SkyScan query 08:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 08:35:22 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 08:35:23 Check angles 08:35:23 SkyScan query 08:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.84<-20256 Statuses=0008 0009 08:35:23 Msec=1500 True Az=112.995 Ze=-123.84 Az status=0008 Ze status=0009 08:35:23 Check angles 08:35:23 SkyScan query 08:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 08:35:24 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 08:35:24 Check angles 08:35:24 SkyScan query 08:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 08:35:25 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 08:35:25 Check angles 08:35:25 SkyScan query 08:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:35:25 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:35:25 Message to Master queued w/err=0: serial=215671 error=0 08:35:30 Received message from Master: op=Filter serial=215672 08:35:30 Color wheel filter change from 0 to 0 08:35:30 FLIGetFilterPos err=0 currentPosition=0 08:35:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:30 Filter is already there-color wheel unchanged 08:35:31 Received message from Master: op=Shutter serial=215673 08:35:31 Shutter LASER open 08:35:31 Received message from Camera: op=State serial=215675 08:35:31 GetSingleValue result=40 Value=cccccccc 08:35:31 SkyScan query 08:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:35:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:31 Parameters OK 08:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:31 Set A/D data flow result=40 08:35:31 Set A/D channel type result=40 08:35:31 Set A/D encoding result=40 08:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:31 Set channel filter=0.000000e+000 result=40 08:35:31 Config A/D Result=40 08:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:31 Get A/D filter: -9.255963e+061 result=40 08:35:31 Get A/D value=-858993460 result=40 08:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:31 Parameters OK 08:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:31 Set A/D data flow result=40 08:35:31 Set A/D channel type result=40 08:35:31 Set A/D encoding result=40 08:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:31 Set channel filter=0.000000e+000 result=40 08:35:31 Config A/D Result=40 08:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:31 Get A/D filter: -9.255963e+061 result=40 08:35:31 Get A/D value=-858993460 result=40 08:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 [UTC 2018-12-17 08:35:31] 08:35:31 Aux= 08:35:31 Message to Camera, serial 215675 queued 08:35:39 Received message from Master: op=Shutter serial=215684 08:35:39 Shutter LASER close 08:35:39 Received message from Master: op=PointingHead serial=215688 08:35:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:35:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:35:40 Point started: ret=0 08:35:40 point_skyscan result=0 08:35:40 Check angles 08:35:40 SkyScan query 08:35:41 SkyScan query done: ret=0 az=89.595<-5973 ze=156.78<-1548 Statuses=0009 0009 08:35:41 Msec=0 True Az=89.595 Ze=156.78 Az status=0009 Ze status=0009 08:35:41 Check angles 08:35:41 SkyScan query 08:35:42 SkyScan query done: ret=0 az=72.075<-4805 ze=135.84<-2944 Statuses=0009 0009 08:35:42 Msec=750 True Az=72.075 Ze=135.84 Az status=0009 Ze status=0009 08:35:42 Check angles 08:35:42 SkyScan query 08:35:42 SkyScan query done: ret=0 az=54.78<-3652 ze=114.885<-4341 Statuses=0009 0009 08:35:42 Msec=1500 True Az=54.78 Ze=114.885 Az status=0009 Ze status=0009 08:35:43 Check angles 08:35:43 SkyScan query 08:35:43 SkyScan query done: ret=0 az=40.965<-2731 ze=93.96<-5736 Statuses=0009 0009 08:35:43 Msec=2250 True Az=40.965 Ze=93.96 Az status=0009 Ze status=0009 08:35:43 Check angles 08:35:43 SkyScan query 08:35:44 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 08:35:44 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 08:35:44 Check angles 08:35:44 SkyScan query 08:35:45 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 08:35:45 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 08:35:45 Check angles 08:35:45 SkyScan query 08:35:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:35:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:35:45 Message to Master queued w/err=0: serial=215688 error=0 08:35:50 Received message from Master: op=Filter serial=215689 08:35:50 Color wheel filter change from 0 to 0 08:35:50 FLIGetFilterPos err=0 currentPosition=0 08:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:50 Filter is already there-color wheel unchanged 08:35:51 Received message from Master: op=Shutter serial=215690 08:35:51 Shutter LASER close 08:35:51 Received message from Camera: op=State serial=215692 08:35:51 GetSingleValue result=40 Value=cccccccc 08:35:51 SkyScan query 08:35:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:51 Parameters OK 08:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:51 Set A/D data flow result=40 08:35:51 Set A/D channel type result=40 08:35:51 Set A/D encoding result=40 08:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:51 Set channel filter=0.000000e+000 result=40 08:35:51 Config A/D Result=40 08:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:51 Get A/D filter: -9.255963e+061 result=40 08:35:51 Get A/D value=-858993460 result=40 08:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:51 Parameters OK 08:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:51 Set A/D data flow result=40 08:35:51 Set A/D channel type result=40 08:35:51 Set A/D encoding result=40 08:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:51 Set channel filter=0.000000e+000 result=40 08:35:51 Config A/D Result=40 08:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:51 Get A/D filter: -9.255963e+061 result=40 08:35:51 Get A/D value=-858993460 result=40 08:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:51 Aux= 08:35:51 Message to Camera, serial 215692 queued [UTC 2018-12-17 08:35:52] 08:36:28 Received message from Master: op=PointingHead serial=215705 08:36:28 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:36:28 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:36:29 Point started: ret=0 08:36:29 point_skyscan result=0 08:36:29 Check angles 08:36:29 SkyScan query 08:36:30 SkyScan query done: ret=0 az=63.78<-4252 ze=66.51<-7566 Statuses=0009 0008 08:36:30 Msec=0 True Az=63.78 Ze=66.51 Az status=0009 Ze status=0008 08:36:30 Check angles 08:36:30 SkyScan query 08:36:31 SkyScan query done: ret=0 az=81.585<-5439 ze=66.495<-7567 Statuses=0009 0008 08:36:31 Msec=750 True Az=81.585 Ze=66.495 Az status=0009 Ze status=0008 08:36:31 Check angles 08:36:31 SkyScan query 08:36:31 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 08:36:31 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 08:36:32 Check angles 08:36:32 SkyScan query 08:36:32 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 08:36:32 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 08:36:32 Check angles 08:36:32 SkyScan query 08:36:33 SkyScan query done: ret=0 az=134.43<-8962 ze=66.495<-7567 Statuses=0009 0008 08:36:33 Msec=3000 True Az=134.43 Ze=66.495 Az status=0009 Ze status=0008 08:36:33 Check angles 08:36:33 SkyScan query 08:36:34 SkyScan query done: ret=0 az=151.74<-10116 ze=66.495<-7567 Statuses=0009 0008 08:36:34 Msec=3750 True Az=151.74 Ze=66.495 Az status=0009 Ze status=0008 08:36:34 Check angles 08:36:34 SkyScan query 08:36:34 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:36:34 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:36:34 Message to Master queued w/err=0: serial=215705 error=0 08:36:39 Received message from Master: op=Filter serial=215706 08:36:39 Color wheel filter change from 0 to 0 08:36:39 FLIGetFilterPos err=0 currentPosition=0 08:36:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:39 Filter is already there-color wheel unchanged 08:36:40 Received message from Master: op=Shutter serial=215707 08:36:40 Shutter LASER close 08:36:40 Received message from Camera: op=State serial=215709 08:36:40 GetSingleValue result=40 Value=cccccccc 08:36:40 SkyScan query 08:36:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:36:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:40 Parameters OK 08:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:40 Set A/D data flow result=40 08:36:40 Set A/D channel type result=40 08:36:40 Set A/D encoding result=40 08:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:40 Set channel filter=0.000000e+000 result=40 08:36:40 Config A/D Result=40 08:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:40 Get A/D filter: -9.255963e+061 result=40 08:36:40 Get A/D value=-858993460 result=40 08:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:40 Parameters OK 08:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:40 Set A/D data flow result=40 08:36:40 Set A/D channel type result=40 08:36:40 Set A/D encoding result=40 08:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:40 Set channel filter=0.000000e+000 result=40 08:36:40 Config A/D Result=40 08:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:40 Get A/D filter: -9.255963e+061 result=40 08:36:40 Get A/D value=-858993460 result=40 08:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:40 Aux= 08:36:40 Message to Camera, serial 215709 queued 08:37:17 Received message from Master: op=PointingHead serial=215722 08:37:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:37:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:37:18 Point started: ret=0 08:37:18 point_skyscan result=0 08:37:18 Check angles 08:37:18 SkyScan query 08:37:19 SkyScan query done: ret=0 az=134.61<-8974 ze=96.615<-5559 Statuses=0009 0009 08:37:19 Msec=0 True Az=134.61 Ze=96.615 Az status=0009 Ze status=0009 08:37:19 Check angles 08:37:19 SkyScan query 08:37:20 SkyScan query done: ret=0 az=130.995<-8733 ze=117.57<-4162 Statuses=0008 0009 08:37:20 Msec=750 True Az=130.995 Ze=117.57 Az status=0008 Ze status=0009 08:37:20 Check angles 08:37:20 SkyScan query 08:37:20 SkyScan query done: ret=0 az=130.995<-8733 ze=138.975<-2735 Statuses=0008 0009 08:37:20 Msec=1500 True Az=130.995 Ze=138.975 Az status=0008 Ze status=0009 08:37:21 Check angles 08:37:21 SkyScan query 08:37:21 SkyScan query done: ret=0 az=130.995<-8733 ze=159.9<-1340 Statuses=0008 0009 08:37:21 Msec=2250 True Az=130.995 Ze=159.9 Az status=0008 Ze status=0009 08:37:21 Check angles 08:37:21 SkyScan query 08:37:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.13<-23942 Statuses=0008 0009 08:37:22 Msec=3000 True Az=130.995 Ze=-179.13 Az status=0008 Ze status=0009 08:37:22 Check angles 08:37:22 SkyScan query 08:37:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.175<-22545 Statuses=0008 0009 08:37:23 Msec=3750 True Az=130.995 Ze=-158.175 Az status=0008 Ze status=0009 08:37:23 Check angles 08:37:23 SkyScan query 08:37:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 08:37:23 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 08:37:24 Check angles 08:37:24 SkyScan query 08:37:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:37:24 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:37:24 Message to Master queued w/err=0: serial=215722 error=0 08:37:29 Received message from Master: op=Filter serial=215723 08:37:29 Color wheel filter change from 0 to 0 08:37:29 FLIGetFilterPos err=0 currentPosition=0 08:37:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:29 Filter is already there-color wheel unchanged 08:37:29 Received message from Master: op=Shutter serial=215724 08:37:29 Shutter LASER close 08:37:29 Received message from Camera: op=State serial=215726 08:37:29 GetSingleValue result=40 Value=cccccccc 08:37:29 SkyScan query 08:37:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:37:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:30 Parameters OK 08:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:30 Set A/D data flow result=40 08:37:30 Set A/D channel type result=40 08:37:30 Set A/D encoding result=40 08:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:30 Set channel filter=0.000000e+000 result=40 08:37:30 Config A/D Result=40 08:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:30 Get A/D filter: -9.255963e+061 result=40 08:37:30 Get A/D value=-858993460 result=40 08:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:30 Parameters OK 08:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:30 Set A/D data flow result=40 08:37:30 Set A/D channel type result=40 08:37:30 Set A/D encoding result=40 08:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:30 Set channel filter=0.000000e+000 result=40 08:37:30 Config A/D Result=40 08:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:30 Get A/D filter: -9.255963e+061 result=40 08:37:30 Get A/D value=-858993460 result=40 08:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:30 Aux= 08:37:30 Message to Camera, serial 215726 queued 08:38:07 Received message from Master: op=PointingHead serial=215739 08:38:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:38:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:38:07 Point started: ret=0 08:38:07 point_skyscan result=0 08:38:08 Check angles 08:38:08 SkyScan query 08:38:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.985<-23399 Statuses=0009 0009 08:38:09 Msec=0 True Az=113.01 Ze=-170.985 Az status=0009 Ze status=0009 08:38:09 Check angles 08:38:09 SkyScan query 08:38:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:38:09 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:38:09 Message to Master queued w/err=0: serial=215739 error=0 08:38:14 Received message from Master: op=Filter serial=215740 08:38:14 Color wheel filter change from 0 to 0 08:38:14 FLIGetFilterPos err=0 currentPosition=0 08:38:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:14 Filter is already there-color wheel unchanged 08:38:14 Received message from Master: op=Shutter serial=215741 08:38:14 Shutter LASER open 08:38:15 Received message from Camera: op=State serial=215743 08:38:15 GetSingleValue result=40 Value=cccccccc 08:38:15 SkyScan query 08:38:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:38:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:15 Parameters OK 08:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:15 Set A/D data flow result=40 08:38:15 Set A/D channel type result=40 08:38:15 Set A/D encoding result=40 08:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:15 Set channel filter=0.000000e+000 result=40 08:38:15 Config A/D Result=40 08:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:15 Get A/D filter: -9.255963e+061 result=40 08:38:15 Get A/D value=-858993460 result=40 08:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:15 Parameters OK 08:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:15 Set A/D data flow result=40 08:38:15 Set A/D channel type result=40 08:38:15 Set A/D encoding result=40 08:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:15 Set channel filter=0.000000e+000 result=40 08:38:15 Config A/D Result=40 08:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:15 Get A/D filter: -9.255963e+061 result=40 08:38:15 Get A/D value=-858993460 result=40 08:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:15 Aux= 08:38:15 Message to Camera, serial 215743 queued 08:38:24 Received message from Master: op=Shutter serial=215753 08:38:24 Shutter LASER close 08:38:24 Received message from Master: op=PointingHead serial=215757 08:38:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:38:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:38:25 Point started: ret=0 08:38:25 point_skyscan result=0 08:38:25 Check angles 08:38:25 SkyScan query 08:38:26 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.085<-21539 Statuses=0009 0009 08:38:26 Msec=0 True Az=136.14 Ze=-143.085 Az status=0009 Ze status=0009 08:38:26 Check angles 08:38:26 SkyScan query 08:38:27 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.1<-20140 Statuses=0009 0009 08:38:27 Msec=750 True Az=153.54 Ze=-122.1 Az status=0009 Ze status=0009 08:38:27 Check angles 08:38:27 SkyScan query 08:38:27 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.235<-18749 Statuses=0009 0009 08:38:27 Msec=1500 True Az=171.045 Ze=-101.235 Az status=0009 Ze status=0009 08:38:28 Check angles 08:38:28 SkyScan query 08:38:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.25<-17350 Statuses=0008 0009 08:38:28 Msec=2250 True Az=175.995 Ze=-80.25 Az status=0008 Ze status=0009 08:38:28 Check angles 08:38:28 SkyScan query 08:38:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 08:38:29 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 08:38:29 Check angles 08:38:29 SkyScan query 08:38:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:38:30 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:38:30 Message to Master queued w/err=0: serial=215757 error=0 08:38:35 Received message from Master: op=Filter serial=215758 08:38:35 Color wheel filter change from 0 to 0 08:38:35 FLIGetFilterPos err=0 currentPosition=0 08:38:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:35 Filter is already there-color wheel unchanged 08:38:35 Received message from Master: op=Shutter serial=215759 08:38:35 Shutter LASER close 08:38:35 Received message from Camera: op=State serial=215761 08:38:35 GetSingleValue result=40 Value=cccccccc 08:38:35 SkyScan query 08:38:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:38:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:36 Parameters OK 08:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:36 Set A/D data flow result=40 08:38:36 Set A/D channel type result=40 08:38:36 Set A/D encoding result=40 08:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:36 Set channel filter=0.000000e+000 result=40 08:38:36 Config A/D Result=40 08:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:36 Get A/D filter: -9.255963e+061 result=40 08:38:36 Get A/D value=-858993460 result=40 08:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:36 Parameters OK 08:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:36 Set A/D data flow result=40 08:38:36 Set A/D channel type result=40 08:38:36 Set A/D encoding result=40 08:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:36 Set channel filter=0.000000e+000 result=40 08:38:36 Config A/D Result=40 08:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:36 Get A/D filter: -9.255963e+061 result=40 08:38:36 Get A/D value=-858993460 result=40 08:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:36 Aux= 08:38:36 Message to Camera, serial 215761 queued 08:39:12 Received message from Master: op=PointingHead serial=215774 08:39:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:39:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:39:13 Point started: ret=0 08:39:13 point_skyscan result=0 08:39:13 Check angles 08:39:13 SkyScan query 08:39:14 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.18<-13412 Statuses=0009 0009 08:39:14 Msec=0 True Az=152.58 Ze=-21.18 Az status=0009 Ze status=0009 08:39:14 Check angles 08:39:14 SkyScan query 08:39:15 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.225<-12015 Statuses=0009 0009 08:39:15 Msec=750 True Az=135.12 Ze=-0.225 Az status=0009 Ze status=0009 08:39:15 Check angles 08:39:15 SkyScan query 08:39:16 SkyScan query done: ret=0 az=117.585<-7839 ze=20.715<-10619 Statuses=0009 0009 08:39:16 Msec=1500 True Az=117.585 Ze=20.715 Az status=0009 Ze status=0009 08:39:16 Check angles 08:39:16 SkyScan query 08:39:16 SkyScan query done: ret=0 az=100.23<-6682 ze=41.685<-9221 Statuses=0009 0009 08:39:16 Msec=2250 True Az=100.23 Ze=41.685 Az status=0009 Ze status=0009 08:39:16 Check angles 08:39:16 SkyScan query 08:39:17 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 08:39:17 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 08:39:17 Check angles 08:39:17 SkyScan query 08:39:18 SkyScan query done: ret=0 az=85.98<-5732 ze=51.495<-8567 Statuses=0008 0008 08:39:18 Msec=3750 True Az=85.98 Ze=51.495 Az status=0008 Ze status=0008 08:39:18 Message to Master queued w/err=0: serial=215774 error=0 08:39:23 Received message from Master: op=Filter serial=215775 08:39:23 Color wheel filter change from 0 to 0 08:39:23 FLIGetFilterPos err=0 currentPosition=0 08:39:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:23 Filter is already there-color wheel unchanged 08:39:23 Received message from Master: op=Shutter serial=215776 08:39:23 Shutter LASER close 08:39:23 Received message from Camera: op=State serial=215778 08:39:23 GetSingleValue result=40 Value=cccccccc 08:39:23 SkyScan query 08:39:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:39:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:24 Parameters OK 08:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:24 Set A/D data flow result=40 08:39:24 Set A/D channel type result=40 08:39:24 Set A/D encoding result=40 08:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:24 Set channel filter=0.000000e+000 result=40 08:39:24 Config A/D Result=40 08:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:24 Get A/D filter: -9.255963e+061 result=40 08:39:24 Get A/D value=-858993460 result=40 08:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:24 Parameters OK 08:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:24 Set A/D data flow result=40 08:39:24 Set A/D channel type result=40 08:39:24 Set A/D encoding result=40 08:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:24 Set channel filter=0.000000e+000 result=40 08:39:24 Config A/D Result=40 08:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:24 Get A/D filter: -9.255963e+061 result=40 08:39:24 Get A/D value=-858993460 result=40 08:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:24 Aux= 08:39:24 Message to Camera, serial 215778 queued 08:40:01 Received message from Master: op=PointingHead serial=215791 08:40:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:40:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:40:01 Point started: ret=0 08:40:01 point_skyscan result=0 08:40:02 Check angles 08:40:02 SkyScan query 08:40:02 SkyScan query done: ret=0 az=109.17<-7278 ze=38.475<-9435 Statuses=0009 0008 08:40:02 Msec=0 True Az=109.17 Ze=38.475 Az status=0009 Ze status=0008 08:40:02 Check angles 08:40:02 SkyScan query 08:40:03 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 08:40:03 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 08:40:03 Check angles 08:40:03 SkyScan query 08:40:04 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 08:40:04 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 08:40:04 Check angles 08:40:04 SkyScan query 08:40:04 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 08:40:04 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 08:40:05 Check angles 08:40:05 SkyScan query 08:40:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 08:40:05 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 08:40:05 Check angles 08:40:05 SkyScan query 08:40:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:40:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:40:06 Message to Master queued w/err=0: serial=215791 error=0 08:40:11 Received message from Master: op=Filter serial=215792 08:40:11 Color wheel filter change from 0 to 0 08:40:11 FLIGetFilterPos err=0 currentPosition=0 08:40:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:11 Filter is already there-color wheel unchanged 08:40:11 Received message from Master: op=Shutter serial=215793 08:40:11 Shutter LASER close 08:40:11 Received message from Camera: op=State serial=215795 08:40:11 GetSingleValue result=40 Value=cccccccc 08:40:11 SkyScan query 08:40:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:40:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:12 Parameters OK 08:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:12 Set A/D data flow result=40 08:40:12 Set A/D channel type result=40 08:40:12 Set A/D encoding result=40 08:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:12 Set channel filter=0.000000e+000 result=40 08:40:12 Config A/D Result=40 08:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:12 Get A/D filter: -9.255963e+061 result=40 08:40:12 Get A/D value=-858993460 result=40 08:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:12 Parameters OK 08:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:12 Set A/D data flow result=40 08:40:12 Set A/D channel type result=40 08:40:12 Set A/D encoding result=40 08:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:12 Set channel filter=0.000000e+000 result=40 08:40:12 Config A/D Result=40 08:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:12 Get A/D filter: -9.255963e+061 result=40 08:40:12 Get A/D value=-858993460 result=40 08:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:12 Aux= 08:40:12 Message to Camera, serial 215795 queued 08:40:49 Received message from Master: op=PointingHead serial=215808 08:40:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:40:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:40:49 Point started: ret=0 08:40:49 point_skyscan result=0 08:40:50 Check angles 08:40:50 SkyScan query 08:40:50 SkyScan query done: ret=0 az=152.745<-10183 ze=8.49<-11434 Statuses=0009 0009 08:40:50 Msec=0 True Az=152.745 Ze=8.49 Az status=0009 Ze status=0009 08:40:50 Check angles 08:40:50 SkyScan query 08:40:51 SkyScan query done: ret=0 az=134.955<-8997 ze=-12.84<-12856 Statuses=0009 0009 08:40:51 Msec=750 True Az=134.955 Ze=-12.84 Az status=0009 Ze status=0009 08:40:51 Check angles 08:40:51 SkyScan query 08:40:52 SkyScan query done: ret=0 az=117.42<-7828 ze=-33.87<-14258 Statuses=0009 0009 08:40:52 Msec=1500 True Az=117.42 Ze=-33.87 Az status=0009 Ze status=0009 08:40:52 Check angles 08:40:52 SkyScan query 08:40:53 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.555<-15437 Statuses=0009 0009 08:40:53 Msec=2250 True Az=100.035 Ze=-51.555 Az status=0009 Ze status=0009 08:40:53 Check angles 08:40:53 SkyScan query 08:40:53 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:40:53 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:40:53 Check angles 08:40:53 SkyScan query 08:40:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:40:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:40:54 Message to Master queued w/err=0: serial=215808 error=0 08:40:59 Received message from Master: op=Filter serial=215809 08:40:59 Color wheel filter change from 0 to 0 08:40:59 FLIGetFilterPos err=0 currentPosition=0 08:40:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:59 Filter is already there-color wheel unchanged 08:40:59 Received message from Master: op=Shutter serial=215810 08:40:59 Shutter LASER close 08:40:59 Received message from Camera: op=State serial=215812 08:40:59 GetSingleValue result=40 Value=cccccccc 08:40:59 SkyScan query 08:41:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:41:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:00 Parameters OK 08:41:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:00 Set A/D data flow result=40 08:41:00 Set A/D channel type result=40 08:41:00 Set A/D encoding result=40 08:41:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:00 Set channel filter=0.000000e+000 result=40 08:41:00 Config A/D Result=40 08:41:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:00 Get A/D filter: -9.255963e+061 result=40 08:41:00 Get A/D value=-858993460 result=40 08:41:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:00 Parameters OK 08:41:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:00 Set A/D data flow result=40 08:41:00 Set A/D channel type result=40 08:41:00 Set A/D encoding result=40 08:41:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:00 Set channel filter=0.000000e+000 result=40 08:41:00 Config A/D Result=40 08:41:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:00 Get A/D filter: -9.255963e+061 result=40 08:41:00 Get A/D value=-858993460 result=40 08:41:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:00 Aux= 08:41:00 Message to Camera, serial 215812 queued 08:41:37 Received message from Master: op=PointingHead serial=215825 08:41:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:41:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:41:37 Point started: ret=0 08:41:37 point_skyscan result=0 08:41:38 Check angles 08:41:38 SkyScan query 08:41:38 SkyScan query done: ret=0 az=109.065<-7271 ze=-81.075<-17405 Statuses=0009 0009 08:41:38 Msec=0 True Az=109.065 Ze=-81.075 Az status=0009 Ze status=0009 08:41:39 Check angles 08:41:39 SkyScan query 08:41:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 08:41:39 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 08:41:39 Check angles 08:41:39 SkyScan query 08:41:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 08:41:40 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 08:41:40 Check angles 08:41:40 SkyScan query 08:41:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 08:41:41 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 08:41:41 Check angles 08:41:41 SkyScan query 08:41:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 08:41:41 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 08:41:42 Check angles 08:41:42 SkyScan query 08:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:41:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:41:42 Message to Master queued w/err=0: serial=215825 error=0 08:41:47 Received message from Master: op=Filter serial=215826 08:41:47 Color wheel filter change from 0 to 0 08:41:47 FLIGetFilterPos err=0 currentPosition=0 08:41:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:47 Filter is already there-color wheel unchanged 08:41:47 Received message from Master: op=Shutter serial=215827 08:41:47 Shutter LASER open 08:41:47 Received message from Camera: op=State serial=215829 08:41:47 GetSingleValue result=40 Value=cccccccc 08:41:47 SkyScan query 08:41:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:41:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:48 Parameters OK 08:41:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:48 Set A/D data flow result=40 08:41:48 Set A/D channel type result=40 08:41:48 Set A/D encoding result=40 08:41:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:48 Set channel filter=0.000000e+000 result=40 08:41:48 Config A/D Result=40 08:41:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:48 Get A/D filter: -9.255963e+061 result=40 08:41:48 Get A/D value=-858993460 result=40 08:41:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:48 Parameters OK 08:41:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:48 Set A/D data flow result=40 08:41:48 Set A/D channel type result=40 08:41:48 Set A/D encoding result=40 08:41:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:48 Set channel filter=0.000000e+000 result=40 08:41:48 Config A/D Result=40 08:41:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:48 Get A/D filter: -9.255963e+061 result=40 08:41:48 Get A/D value=-858993460 result=40 08:41:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:48 Aux= 08:41:48 Message to Camera, serial 215829 queued 08:41:56 Received message from Master: op=Shutter serial=215839 08:41:57 Shutter LASER close 08:41:57 Received message from Master: op=PointingHead serial=215843 08:41:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:41:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:41:57 Point started: ret=0 08:41:57 point_skyscan result=0 08:41:58 Check angles 08:41:58 SkyScan query 08:41:59 SkyScan query done: ret=0 az=89.88<-5992 ze=157.2<-1520 Statuses=0009 0009 08:41:59 Msec=0 True Az=89.88 Ze=157.2 Az status=0009 Ze status=0009 08:41:59 Check angles 08:41:59 SkyScan query 08:41:59 SkyScan query done: ret=0 az=71.865<-4791 ze=135.39<-2974 Statuses=0009 0009 08:41:59 Msec=750 True Az=71.865 Ze=135.39 Az status=0009 Ze status=0009 08:42:00 Check angles 08:42:00 SkyScan query 08:42:00 SkyScan query done: ret=0 az=54.81<-3654 ze=114.78<-4348 Statuses=0009 0009 08:42:00 Msec=1500 True Az=54.81 Ze=114.78 Az status=0009 Ze status=0009 08:42:00 Check angles 08:42:00 SkyScan query 08:42:01 SkyScan query done: ret=0 az=40.965<-2731 ze=93.915<-5739 Statuses=0009 0009 08:42:01 Msec=2250 True Az=40.965 Ze=93.915 Az status=0009 Ze status=0009 08:42:01 Check angles 08:42:01 SkyScan query 08:42:02 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 08:42:02 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 08:42:02 Check angles 08:42:02 SkyScan query 08:42:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 08:42:02 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 08:42:03 Check angles 08:42:03 SkyScan query 08:42:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:42:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:42:03 Message to Master queued w/err=0: serial=215843 error=0 08:42:08 Received message from Master: op=Filter serial=215844 08:42:08 Color wheel filter change from 0 to 0 08:42:08 FLIGetFilterPos err=0 currentPosition=0 08:42:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:08 Filter is already there-color wheel unchanged 08:42:08 Received message from Master: op=Shutter serial=215845 08:42:08 Shutter LASER close 08:42:08 Received message from Camera: op=State serial=215847 08:42:08 GetSingleValue result=40 Value=cccccccc 08:42:08 SkyScan query 08:42:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:42:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:09 Parameters OK 08:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:09 Set A/D data flow result=40 08:42:09 Set A/D channel type result=40 08:42:09 Set A/D encoding result=40 08:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:09 Set channel filter=0.000000e+000 result=40 08:42:09 Config A/D Result=40 08:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:09 Get A/D filter: -9.255963e+061 result=40 08:42:09 Get A/D value=-858993460 result=40 08:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:09 Parameters OK 08:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:09 Set A/D data flow result=40 08:42:09 Set A/D channel type result=40 08:42:09 Set A/D encoding result=40 08:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:09 Set channel filter=0.000000e+000 result=40 08:42:09 Config A/D Result=40 08:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:09 Get A/D filter: -9.255963e+061 result=40 08:42:09 Get A/D value=-858993460 result=40 08:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:09 Aux= 08:42:09 Message to Camera, serial 215847 queued 08:42:46 Received message from Master: op=PointingHead serial=215860 08:42:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:42:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:42:46 Point started: ret=0 08:42:46 point_skyscan result=0 08:42:47 Check angles 08:42:47 SkyScan query 08:42:48 SkyScan query done: ret=0 az=64.155<-4277 ze=66.525<-7565 Statuses=0009 0008 08:42:48 Msec=0 True Az=64.155 Ze=66.525 Az status=0009 Ze status=0008 08:42:48 Check angles 08:42:48 SkyScan query 08:42:48 SkyScan query done: ret=0 az=82.08<-5472 ze=66.51<-7566 Statuses=0009 0008 08:42:48 Msec=750 True Az=82.08 Ze=66.51 Az status=0009 Ze status=0008 08:42:48 Check angles 08:42:48 SkyScan query 08:42:49 SkyScan query done: ret=0 az=99.585<-6639 ze=66.51<-7566 Statuses=0009 0008 08:42:49 Msec=1500 True Az=99.585 Ze=66.51 Az status=0009 Ze status=0008 08:42:49 Check angles 08:42:49 SkyScan query 08:42:50 SkyScan query done: ret=0 az=117<-7800 ze=66.51<-7566 Statuses=0009 0008 08:42:50 Msec=2250 True Az=117 Ze=66.51 Az status=0009 Ze status=0008 08:42:50 Check angles 08:42:50 SkyScan query 08:42:51 SkyScan query done: ret=0 az=134.505<-8967 ze=66.51<-7566 Statuses=0009 0008 08:42:51 Msec=3000 True Az=134.505 Ze=66.51 Az status=0009 Ze status=0008 08:42:51 Check angles 08:42:51 SkyScan query 08:42:51 SkyScan query done: ret=0 az=151.755<-10117 ze=66.51<-7566 Statuses=0009 0008 08:42:51 Msec=3750 True Az=151.755 Ze=66.51 Az status=0009 Ze status=0008 08:42:51 Check angles 08:42:51 SkyScan query 08:42:52 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 08:42:52 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 08:42:52 Message to Master queued w/err=0: serial=215860 error=0 08:42:57 Received message from Master: op=Filter serial=215861 08:42:57 Color wheel filter change from 0 to 0 08:42:57 FLIGetFilterPos err=0 currentPosition=0 08:42:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:57 Filter is already there-color wheel unchanged 08:42:57 Received message from Master: op=Shutter serial=215862 08:42:57 Shutter LASER close 08:42:57 Received message from Camera: op=State serial=215864 08:42:57 GetSingleValue result=40 Value=cccccccc 08:42:57 SkyScan query 08:42:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 08:42:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:58 Parameters OK 08:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:58 Set A/D data flow result=40 08:42:58 Set A/D channel type result=40 08:42:58 Set A/D encoding result=40 08:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:58 Set channel filter=0.000000e+000 result=40 08:42:58 Config A/D Result=40 08:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:58 Get A/D filter: -9.255963e+061 result=40 08:42:58 Get A/D value=-858993460 result=40 08:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:58 Parameters OK 08:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:58 Set A/D data flow result=40 08:42:58 Set A/D channel type result=40 08:42:58 Set A/D encoding result=40 08:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:58 Set channel filter=0.000000e+000 result=40 08:42:58 Config A/D Result=40 08:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:58 Get A/D filter: -9.255963e+061 result=40 08:42:58 Get A/D value=-858993460 result=40 08:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:58 Aux= 08:42:58 Message to Camera, serial 215864 queued 08:43:35 Received message from Master: op=PointingHead serial=215877 08:43:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:43:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:43:35 Point started: ret=0 08:43:35 point_skyscan result=0 08:43:36 Check angles 08:43:36 SkyScan query 08:43:36 SkyScan query done: ret=0 az=134.58<-8972 ze=96.765<-5549 Statuses=0009 0009 08:43:36 Msec=0 True Az=134.58 Ze=96.765 Az status=0009 Ze status=0009 08:43:37 Check angles 08:43:37 SkyScan query 08:43:37 SkyScan query done: ret=0 az=130.995<-8733 ze=118.14<-4124 Statuses=0008 0009 08:43:37 Msec=750 True Az=130.995 Ze=118.14 Az status=0008 Ze status=0009 08:43:37 Check angles 08:43:37 SkyScan query 08:43:38 SkyScan query done: ret=0 az=130.995<-8733 ze=139.11<-2726 Statuses=0008 0009 08:43:38 Msec=1500 True Az=130.995 Ze=139.11 Az status=0008 Ze status=0009 08:43:38 Check angles 08:43:38 SkyScan query 08:43:39 SkyScan query done: ret=0 az=130.995<-8733 ze=160.065<-1329 Statuses=0008 0009 08:43:39 Msec=2250 True Az=130.995 Ze=160.065 Az status=0008 Ze status=0009 08:43:39 Check angles 08:43:39 SkyScan query 08:43:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.98<-23932 Statuses=0008 0009 08:43:39 Msec=3000 True Az=130.995 Ze=-178.98 Az status=0008 Ze status=0009 08:43:40 Check angles 08:43:40 SkyScan query 08:43:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.62<-22508 Statuses=0008 0009 08:43:40 Msec=3750 True Az=130.995 Ze=-157.62 Az status=0008 Ze status=0009 08:43:40 Check angles 08:43:40 SkyScan query 08:43:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 08:43:41 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 08:43:41 Check angles 08:43:41 SkyScan query 08:43:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:43:42 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:43:42 Message to Master queued w/err=0: serial=215877 error=0 08:43:47 Received message from Master: op=Filter serial=215878 08:43:47 Color wheel filter change from 0 to 0 08:43:47 FLIGetFilterPos err=0 currentPosition=0 08:43:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:47 Filter is already there-color wheel unchanged 08:43:47 Received message from Master: op=Shutter serial=215879 08:43:47 Shutter LASER close 08:43:47 Received message from Camera: op=State serial=215881 08:43:47 GetSingleValue result=40 Value=cccccccc 08:43:47 SkyScan query 08:43:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:43:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:48 Parameters OK 08:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:48 Set A/D data flow result=40 08:43:48 Set A/D channel type result=40 08:43:48 Set A/D encoding result=40 08:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:48 Set channel filter=0.000000e+000 result=40 08:43:48 Config A/D Result=40 08:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:48 Get A/D filter: -9.255963e+061 result=40 08:43:48 Get A/D value=-858993460 result=40 08:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:48 Parameters OK 08:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:48 Set A/D data flow result=40 08:43:48 Set A/D channel type result=40 08:43:48 Set A/D encoding result=40 08:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:48 Set channel filter=0.000000e+000 result=40 08:43:48 Config A/D Result=40 08:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:48 Get A/D filter: -9.255963e+061 result=40 08:43:48 Get A/D value=-858993460 result=40 08:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:48 Aux= 08:43:48 Message to Camera, serial 215881 queued 08:44:24 Received message from Master: op=PointingHead serial=215894 08:44:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:44:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:44:25 Point started: ret=0 08:44:25 point_skyscan result=0 08:44:25 Check angles 08:44:25 SkyScan query 08:44:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0009 0009 08:44:26 Msec=0 True Az=112.995 Ze=-171.345 Az status=0009 Ze status=0009 08:44:26 Check angles 08:44:26 SkyScan query 08:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:44:27 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:44:27 Message to Master queued w/err=0: serial=215894 error=0 08:44:32 Received message from Master: op=Filter serial=215895 08:44:32 Color wheel filter change from 0 to 0 08:44:32 FLIGetFilterPos err=0 currentPosition=0 08:44:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:32 Filter is already there-color wheel unchanged 08:44:32 Received message from Master: op=Shutter serial=215896 08:44:32 Shutter LASER open 08:44:32 Received message from Camera: op=State serial=215898 08:44:32 GetSingleValue result=40 Value=cccccccc 08:44:32 SkyScan query 08:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:44:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:33 Parameters OK 08:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:33 Set A/D data flow result=40 08:44:33 Set A/D channel type result=40 08:44:33 Set A/D encoding result=40 08:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:33 Set channel filter=0.000000e+000 result=40 08:44:33 Config A/D Result=40 08:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:33 Get A/D filter: -9.255963e+061 result=40 08:44:33 Get A/D value=-858993460 result=40 08:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:33 Parameters OK 08:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:33 Set A/D data flow result=40 08:44:33 Set A/D channel type result=40 08:44:33 Set A/D encoding result=40 08:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:33 Set channel filter=0.000000e+000 result=40 08:44:33 Config A/D Result=40 08:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:33 Get A/D filter: -9.255963e+061 result=40 08:44:33 Get A/D value=-858993460 result=40 08:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:33 Aux= 08:44:33 Message to Camera, serial 215898 queued 08:44:40 Received message from Master: op=Shutter serial=215907 08:44:40 Shutter LASER close 08:44:41 Received message from Master: op=PointingHead serial=215911 08:44:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:44:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:44:41 Point started: ret=0 08:44:41 point_skyscan result=0 08:44:42 Check angles 08:44:42 SkyScan query 08:44:43 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.265<-21551 Statuses=0009 0009 08:44:43 Msec=0 True Az=135.99 Ze=-143.265 Az status=0009 Ze status=0009 08:44:43 Check angles 08:44:43 SkyScan query 08:44:43 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.295<-20153 Statuses=0009 0009 08:44:43 Msec=750 True Az=153.48 Ze=-122.295 Az status=0009 Ze status=0009 08:44:43 Check angles 08:44:43 SkyScan query 08:44:44 SkyScan query done: ret=0 az=170.895<-11393 ze=-101.43<-18762 Statuses=0009 0009 08:44:44 Msec=1500 True Az=170.895 Ze=-101.43 Az status=0009 Ze status=0009 08:44:44 Check angles 08:44:44 SkyScan query 08:44:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 08:44:45 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 08:44:45 Check angles 08:44:45 SkyScan query 08:44:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.01<-15934 Statuses=0008 0009 08:44:46 Msec=3000 True Az=175.995 Ze=-59.01 Az status=0008 Ze status=0009 08:44:46 Check angles 08:44:46 SkyScan query 08:44:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:44:46 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:44:46 Message to Master queued w/err=0: serial=215911 error=0 08:44:51 Received message from Master: op=Filter serial=215912 08:44:51 Color wheel filter change from 0 to 0 08:44:51 FLIGetFilterPos err=0 currentPosition=0 08:44:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:51 Filter is already there-color wheel unchanged 08:44:51 Received message from Master: op=Shutter serial=215913 08:44:51 Shutter LASER close 08:44:52 Received message from Camera: op=State serial=215915 08:44:52 GetSingleValue result=40 Value=cccccccc 08:44:52 SkyScan query 08:44:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:44:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:52 Parameters OK 08:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:52 Set A/D data flow result=40 08:44:52 Set A/D channel type result=40 08:44:52 Set A/D encoding result=40 08:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:52 Set channel filter=0.000000e+000 result=40 08:44:52 Config A/D Result=40 08:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:52 Get A/D filter: -9.255963e+061 result=40 08:44:52 Get A/D value=-858993460 result=40 08:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:52 Parameters OK 08:44:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:52 Set A/D data flow result=40 08:44:52 Set A/D channel type result=40 08:44:52 Set A/D encoding result=40 08:44:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:52 Set channel filter=0.000000e+000 result=40 08:44:52 Config A/D Result=40 08:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:52 Get A/D filter: -9.255963e+061 result=40 08:44:52 Get A/D value=-858993460 result=40 08:44:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:52 Aux= 08:44:52 Message to Camera, serial 215915 queued 08:45:27 Received message from Master: op=Identify serial=215923 08:45:29 Received message from Master: op=PointingHead serial=215931 08:45:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:45:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:45:29 Point started: ret=0 08:45:29 point_skyscan result=0 08:45:30 Check angles 08:45:30 SkyScan query 08:45:31 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.285<-13419 Statuses=0009 0009 08:45:31 Msec=0 True Az=152.67 Ze=-21.285 Az status=0009 Ze status=0009 08:45:31 Check angles 08:45:31 SkyScan query 08:45:31 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.3<-12020 Statuses=0009 0009 08:45:31 Msec=750 True Az=135.12 Ze=-0.3 Az status=0009 Ze status=0009 08:45:32 Check angles 08:45:32 SkyScan query 08:45:32 SkyScan query done: ret=0 az=117.615<-7841 ze=20.625<-10625 Statuses=0009 0009 08:45:32 Msec=1500 True Az=117.615 Ze=20.625 Az status=0009 Ze status=0009 08:45:32 Check angles 08:45:32 SkyScan query 08:45:33 SkyScan query done: ret=0 az=100.245<-6683 ze=41.595<-9227 Statuses=0009 0009 08:45:33 Msec=2250 True Az=100.245 Ze=41.595 Az status=0009 Ze status=0009 08:45:33 Check angles 08:45:33 SkyScan query 08:45:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 08:45:34 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 08:45:34 Check angles 08:45:34 SkyScan query 08:45:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:45:34 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:45:34 Message to Master queued w/err=0: serial=215931 error=0 08:45:39 Received message from Master: op=Filter serial=215932 08:45:39 Color wheel filter change from 0 to 0 08:45:39 FLIGetFilterPos err=0 currentPosition=0 08:45:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:39 Filter is already there-color wheel unchanged 08:45:40 Received message from Master: op=Shutter serial=215933 08:45:40 Shutter LASER close 08:45:40 Received message from Camera: op=State serial=215935 08:45:40 GetSingleValue result=40 Value=cccccccc 08:45:40 SkyScan query 08:45:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:45:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:40 Parameters OK 08:45:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:40 Set A/D data flow result=40 08:45:40 Set A/D channel type result=40 08:45:40 Set A/D encoding result=40 08:45:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:40 Set channel filter=0.000000e+000 result=40 08:45:40 Config A/D Result=40 08:45:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:40 Get A/D filter: -9.255963e+061 result=40 08:45:40 Get A/D value=-858993460 result=40 08:45:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:40 Parameters OK 08:45:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:40 Set A/D data flow result=40 08:45:40 Set A/D channel type result=40 08:45:40 Set A/D encoding result=40 08:45:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:40 Set channel filter=0.000000e+000 result=40 08:45:40 Config A/D Result=40 08:45:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:40 Get A/D filter: -9.255963e+061 result=40 08:45:40 Get A/D value=-858993460 result=40 08:45:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:40 Aux= 08:45:40 Message to Camera, serial 215935 queued 08:46:17 Received message from Master: op=PointingHead serial=215948 08:46:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) [UTC 2018-12-17 08:46:17] 08:46:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:46:18 Point started: ret=0 08:46:18 point_skyscan result=0 08:46:18 Check angles 08:46:18 SkyScan query 08:46:19 SkyScan query done: ret=0 az=108.885<-7259 ze=38.475<-9435 Statuses=0009 0008 08:46:19 Msec=0 True Az=108.885 Ze=38.475 Az status=0009 Ze status=0008 08:46:19 Check angles 08:46:19 SkyScan query 08:46:20 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 08:46:20 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 08:46:20 Check angles 08:46:20 SkyScan query 08:46:20 SkyScan query done: ret=0 az=143.97<-9598 ze=38.505<-9433 Statuses=0009 0008 08:46:20 Msec=1500 True Az=143.97 Ze=38.505 Az status=0009 Ze status=0008 08:46:21 Check angles 08:46:21 SkyScan query 08:46:21 SkyScan query done: ret=0 az=161.175<-10745 ze=38.505<-9433 Statuses=0009 0008 08:46:21 Msec=2250 True Az=161.175 Ze=38.505 Az status=0009 Ze status=0008 08:46:21 Check angles 08:46:21 SkyScan query 08:46:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:46:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:46:22 Check angles 08:46:22 SkyScan query 08:46:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:46:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:46:23 Message to Master queued w/err=0: serial=215948 error=0 08:46:28 Received message from Master: op=Filter serial=215949 08:46:28 Color wheel filter change from 0 to 0 08:46:28 FLIGetFilterPos err=0 currentPosition=0 08:46:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:28 Filter is already there-color wheel unchanged 08:46:28 Received message from Master: op=Shutter serial=215950 08:46:28 Shutter LASER close 08:46:28 Received message from Camera: op=State serial=215952 08:46:28 GetSingleValue result=40 Value=cccccccc 08:46:28 SkyScan query 08:46:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:46:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:28 Parameters OK 08:46:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:28 Set A/D data flow result=40 08:46:28 Set A/D channel type result=40 08:46:28 Set A/D encoding result=40 08:46:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:28 Set channel filter=0.000000e+000 result=40 08:46:28 Config A/D Result=40 08:46:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:28 Get A/D filter: -9.255963e+061 result=40 08:46:28 Get A/D value=-858993460 result=40 08:46:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:28 Parameters OK 08:46:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:28 Set A/D data flow result=40 08:46:28 Set A/D channel type result=40 08:46:28 Set A/D encoding result=40 08:46:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:28 Set channel filter=0.000000e+000 result=40 08:46:28 Config A/D Result=40 08:46:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:28 Get A/D filter: -9.255963e+061 result=40 08:46:28 Get A/D value=-858993460 result=40 08:46:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:28 Aux= 08:46:28 Message to Camera, serial 215952 queued 08:47:04 Received message from Master: op=PointingHead serial=215964 08:47:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:47:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:47:05 Point started: ret=0 08:47:05 point_skyscan result=0 08:47:05 Check angles 08:47:05 SkyScan query 08:47:06 SkyScan query done: ret=0 az=152.76<-10184 ze=8.43<-11438 Statuses=0009 0009 08:47:06 Msec=0 True Az=152.76 Ze=8.43 Az status=0009 Ze status=0009 08:47:06 Check angles 08:47:06 SkyScan query 08:47:07 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.42<-12828 Statuses=0009 0009 08:47:07 Msec=750 True Az=135.36 Ze=-12.42 Az status=0009 Ze status=0009 08:47:07 Check angles 08:47:07 SkyScan query 08:47:07 SkyScan query done: ret=0 az=117.51<-7834 ze=-33.915<-14261 Statuses=0009 0009 08:47:07 Msec=1500 True Az=117.51 Ze=-33.915 Az status=0009 Ze status=0009 08:47:08 Check angles 08:47:08 SkyScan query 08:47:08 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.555<-15437 Statuses=0009 0009 08:47:08 Msec=2250 True Az=100.14 Ze=-51.555 Az status=0009 Ze status=0009 08:47:08 Check angles 08:47:08 SkyScan query 08:47:09 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:47:09 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:47:09 Check angles 08:47:09 SkyScan query 08:47:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:47:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:47:10 Message to Master queued w/err=0: serial=215964 error=0 08:47:15 Received message from Master: op=Filter serial=215965 08:47:15 Color wheel filter change from 0 to 0 08:47:15 FLIGetFilterPos err=0 currentPosition=0 08:47:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:15 Filter is already there-color wheel unchanged 08:47:15 Received message from Master: op=Shutter serial=215966 08:47:15 Shutter LASER close 08:47:15 Received message from Camera: op=State serial=215968 08:47:15 GetSingleValue result=40 Value=cccccccc 08:47:15 SkyScan query 08:47:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:47:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:16 Parameters OK 08:47:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:16 Set A/D data flow result=40 08:47:16 Set A/D channel type result=40 08:47:16 Set A/D encoding result=40 08:47:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:16 Set channel filter=0.000000e+000 result=40 08:47:16 Config A/D Result=40 08:47:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:16 Get A/D filter: -9.255963e+061 result=40 08:47:16 Get A/D value=-858993460 result=40 08:47:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:16 Parameters OK 08:47:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:16 Set A/D data flow result=40 08:47:16 Set A/D channel type result=40 08:47:16 Set A/D encoding result=40 08:47:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:16 Set channel filter=0.000000e+000 result=40 08:47:16 Config A/D Result=40 08:47:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:16 Get A/D filter: -9.255963e+061 result=40 08:47:16 Get A/D value=-858993460 result=40 08:47:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:16 Aux= 08:47:16 Message to Camera, serial 215968 queued 08:47:52 Received message from Master: op=PointingHead serial=215981 08:47:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:47:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:47:53 Point started: ret=0 08:47:53 point_skyscan result=0 08:47:53 Check angles 08:47:53 SkyScan query 08:47:54 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.315<-17421 Statuses=0009 0009 08:47:54 Msec=0 True Az=109.14 Ze=-81.315 Az status=0009 Ze status=0009 08:47:54 Check angles 08:47:54 SkyScan query 08:47:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.69<-18846 Statuses=0008 0009 08:47:55 Msec=750 True Az=112.995 Ze=-102.69 Az status=0008 Ze status=0009 08:47:55 Check angles 08:47:55 SkyScan query 08:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 08:47:56 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 08:47:56 Check angles 08:47:56 SkyScan query 08:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 08:47:56 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 08:47:56 Check angles 08:47:56 SkyScan query 08:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 08:47:57 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 08:47:57 Check angles 08:47:57 SkyScan query 08:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:47:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:47:58 Message to Master queued w/err=0: serial=215981 error=0 08:48:03 Received message from Master: op=Filter serial=215982 08:48:03 Color wheel filter change from 0 to 0 08:48:03 FLIGetFilterPos err=0 currentPosition=0 08:48:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:03 Filter is already there-color wheel unchanged 08:48:03 Received message from Master: op=Shutter serial=215983 08:48:03 Shutter LASER open 08:48:03 Received message from Camera: op=State serial=215985 08:48:03 GetSingleValue result=40 Value=cccccccc 08:48:03 SkyScan query 08:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:48:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:04 Parameters OK 08:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:04 Set A/D data flow result=40 08:48:04 Set A/D channel type result=40 08:48:04 Set A/D encoding result=40 08:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:04 Set channel filter=0.000000e+000 result=40 08:48:04 Config A/D Result=40 08:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:04 Get A/D filter: -9.255963e+061 result=40 08:48:04 Get A/D value=-858993460 result=40 08:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:04 Parameters OK 08:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:04 Set A/D data flow result=40 08:48:04 Set A/D channel type result=40 08:48:04 Set A/D encoding result=40 08:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:04 Set channel filter=0.000000e+000 result=40 08:48:04 Config A/D Result=40 08:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:04 Get A/D filter: -9.255963e+061 result=40 08:48:04 Get A/D value=-858993460 result=40 08:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:04 Aux= 08:48:04 Message to Camera, serial 215985 queued 08:48:12 Received message from Master: op=Shutter serial=215995 08:48:12 Shutter LASER close 08:48:13 Received message from Master: op=PointingHead serial=215999 08:48:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:48:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:48:13 Point started: ret=0 08:48:13 point_skyscan result=0 08:48:14 Check angles 08:48:14 SkyScan query 08:48:14 SkyScan query done: ret=0 az=89.865<-5991 ze=157.185<-1521 Statuses=0009 0009 08:48:14 Msec=0 True Az=89.865 Ze=157.185 Az status=0009 Ze status=0009 08:48:14 Check angles 08:48:14 SkyScan query 08:48:15 SkyScan query done: ret=0 az=72.42<-4828 ze=136.23<-2918 Statuses=0009 0009 08:48:15 Msec=750 True Az=72.42 Ze=136.23 Az status=0009 Ze status=0009 08:48:15 Check angles 08:48:15 SkyScan query 08:48:16 SkyScan query done: ret=0 az=55.065<-3671 ze=115.305<-4313 Statuses=0009 0009 08:48:16 Msec=1500 True Az=55.065 Ze=115.305 Az status=0009 Ze status=0009 08:48:16 Check angles 08:48:16 SkyScan query 08:48:17 SkyScan query done: ret=0 az=40.935<-2729 ze=94.305<-5713 Statuses=0009 0009 08:48:17 Msec=2250 True Az=40.935 Ze=94.305 Az status=0009 Ze status=0009 08:48:17 Check angles 08:48:17 SkyScan query 08:48:17 SkyScan query done: ret=0 az=40.995<-2733 ze=73.365<-7109 Statuses=0008 0009 08:48:17 Msec=3000 True Az=40.995 Ze=73.365 Az status=0008 Ze status=0009 08:48:17 Check angles 08:48:17 SkyScan query 08:48:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.8<-8480 Statuses=0008 0009 08:48:18 Msec=3750 True Az=40.995 Ze=52.8 Az status=0008 Ze status=0009 08:48:18 Check angles 08:48:18 SkyScan query 08:48:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:48:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:48:19 Message to Master queued w/err=0: serial=215999 error=0 08:48:24 Received message from Master: op=Filter serial=216000 08:48:24 Color wheel filter change from 0 to 0 08:48:24 FLIGetFilterPos err=0 currentPosition=0 08:48:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:24 Filter is already there-color wheel unchanged 08:48:24 Received message from Master: op=Shutter serial=216001 08:48:24 Shutter LASER close 08:48:24 Received message from Camera: op=State serial=216003 08:48:24 GetSingleValue result=40 Value=cccccccc 08:48:24 SkyScan query 08:48:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:48:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:25 Parameters OK 08:48:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:25 Set A/D data flow result=40 08:48:25 Set A/D channel type result=40 08:48:25 Set A/D encoding result=40 08:48:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:25 Set channel filter=0.000000e+000 result=40 08:48:25 Config A/D Result=40 08:48:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:25 Get A/D filter: -9.255963e+061 result=40 08:48:25 Get A/D value=-858993460 result=40 08:48:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:25 Parameters OK 08:48:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:25 Set A/D data flow result=40 08:48:25 Set A/D channel type result=40 08:48:25 Set A/D encoding result=40 08:48:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:25 Set channel filter=0.000000e+000 result=40 08:48:25 Config A/D Result=40 08:48:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:25 Get A/D filter: -9.255963e+061 result=40 08:48:25 Get A/D value=-858993460 result=40 08:48:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:25 Aux= 08:48:25 Message to Camera, serial 216003 queued 08:49:02 Received message from Master: op=PointingHead serial=216016 08:49:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:49:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:49:02 Point started: ret=0 08:49:02 point_skyscan result=0 08:49:03 Check angles 08:49:03 SkyScan query 08:49:03 SkyScan query done: ret=0 az=63.84<-4256 ze=66.51<-7566 Statuses=0009 0008 08:49:03 Msec=0 True Az=63.84 Ze=66.51 Az status=0009 Ze status=0008 08:49:04 Check angles 08:49:04 SkyScan query 08:49:04 SkyScan query done: ret=0 az=81.675<-5445 ze=66.51<-7566 Statuses=0009 0008 08:49:04 Msec=750 True Az=81.675 Ze=66.51 Az status=0009 Ze status=0008 08:49:04 Check angles 08:49:04 SkyScan query 08:49:05 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 08:49:05 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 08:49:05 Check angles 08:49:05 SkyScan query 08:49:06 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 08:49:06 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 08:49:06 Check angles 08:49:06 SkyScan query 08:49:06 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 08:49:06 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 08:49:07 Check angles 08:49:07 SkyScan query 08:49:07 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 08:49:07 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 08:49:07 Check angles 08:49:07 SkyScan query 08:49:08 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:49:08 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:49:08 Message to Master queued w/err=0: serial=216016 error=0 08:49:13 Received message from Master: op=Filter serial=216017 08:49:13 Color wheel filter change from 0 to 0 08:49:13 FLIGetFilterPos err=0 currentPosition=0 08:49:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:13 Filter is already there-color wheel unchanged 08:49:13 Received message from Master: op=Shutter serial=216018 08:49:13 Shutter LASER close 08:49:13 Received message from Camera: op=State serial=216020 08:49:13 GetSingleValue result=40 Value=cccccccc 08:49:13 SkyScan query 08:49:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:49:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:14 Parameters OK 08:49:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:14 Set A/D data flow result=40 08:49:14 Set A/D channel type result=40 08:49:14 Set A/D encoding result=40 08:49:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:14 Set channel filter=0.000000e+000 result=40 08:49:14 Config A/D Result=40 08:49:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:14 Get A/D filter: -9.255963e+061 result=40 08:49:14 Get A/D value=-858993460 result=40 08:49:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:14 Parameters OK 08:49:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:14 Set A/D data flow result=40 08:49:14 Set A/D channel type result=40 08:49:14 Set A/D encoding result=40 08:49:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:14 Set channel filter=0.000000e+000 result=40 08:49:14 Config A/D Result=40 08:49:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:14 Get A/D filter: -9.255963e+061 result=40 08:49:14 Get A/D value=-858993460 result=40 08:49:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:14 Aux= 08:49:14 Message to Camera, serial 216020 queued 08:49:51 Received message from Master: op=PointingHead serial=216033 08:49:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:49:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:49:51 Point started: ret=0 08:49:51 point_skyscan result=0 08:49:52 Check angles 08:49:52 SkyScan query 08:49:52 SkyScan query done: ret=0 az=134.58<-8972 ze=96.66<-5556 Statuses=0009 0009 08:49:52 Msec=0 True Az=134.58 Ze=96.66 Az status=0009 Ze status=0009 08:49:52 Check angles 08:49:52 SkyScan query 08:49:53 SkyScan query done: ret=0 az=130.995<-8733 ze=117.63<-4158 Statuses=0008 0009 08:49:53 Msec=750 True Az=130.995 Ze=117.63 Az status=0008 Ze status=0009 08:49:53 Check angles 08:49:53 SkyScan query 08:49:54 SkyScan query done: ret=0 az=130.995<-8733 ze=139.035<-2731 Statuses=0008 0009 08:49:54 Msec=1500 True Az=130.995 Ze=139.035 Az status=0008 Ze status=0009 08:49:54 Check angles 08:49:54 SkyScan query 08:49:55 SkyScan query done: ret=0 az=130.995<-8733 ze=159.96<-1336 Statuses=0008 0009 08:49:55 Msec=2250 True Az=130.995 Ze=159.96 Az status=0008 Ze status=0009 08:49:55 Check angles 08:49:55 SkyScan query 08:49:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.07<-23938 Statuses=0008 0009 08:49:55 Msec=3000 True Az=130.995 Ze=-179.07 Az status=0008 Ze status=0009 08:49:55 Check angles 08:49:55 SkyScan query 08:49:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.115<-22541 Statuses=0008 0009 08:49:56 Msec=3750 True Az=130.995 Ze=-158.115 Az status=0008 Ze status=0009 08:49:56 Check angles 08:49:56 SkyScan query 08:49:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 08:49:57 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 08:49:57 Check angles 08:49:57 SkyScan query 08:49:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:49:58 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:49:58 Message to Master queued w/err=0: serial=216033 error=0 08:50:03 Received message from Master: op=Filter serial=216034 08:50:03 Color wheel filter change from 0 to 0 08:50:03 FLIGetFilterPos err=0 currentPosition=0 08:50:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:03 Filter is already there-color wheel unchanged 08:50:03 Received message from Master: op=Shutter serial=216035 08:50:03 Shutter LASER close 08:50:03 Received message from Camera: op=State serial=216037 08:50:03 GetSingleValue result=40 Value=cccccccc 08:50:03 SkyScan query 08:50:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:50:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:03 Parameters OK 08:50:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:03 Set A/D data flow result=40 08:50:03 Set A/D channel type result=40 08:50:03 Set A/D encoding result=40 08:50:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:03 Set channel filter=0.000000e+000 result=40 08:50:03 Config A/D Result=40 08:50:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:03 Get A/D filter: -9.255963e+061 result=40 08:50:03 Get A/D value=-858993460 result=40 08:50:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:03 Parameters OK 08:50:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:03 Set A/D data flow result=40 08:50:03 Set A/D channel type result=40 08:50:03 Set A/D encoding result=40 08:50:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:03 Set channel filter=0.000000e+000 result=40 08:50:03 Config A/D Result=40 08:50:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:03 Get A/D filter: -9.255963e+061 result=40 08:50:03 Get A/D value=-858993460 result=40 08:50:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:03 Aux= 08:50:03 Message to Camera, serial 216037 queued 08:50:40 Received message from Master: op=PointingHead serial=216050 08:50:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:50:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:50:41 Point started: ret=0 08:50:41 point_skyscan result=0 08:50:41 Check angles 08:50:41 SkyScan query 08:50:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 08:50:42 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 08:50:42 Check angles 08:50:42 SkyScan query 08:50:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:50:43 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:50:43 Message to Master queued w/err=0: serial=216050 error=0 08:50:48 Received message from Master: op=Filter serial=216051 08:50:48 Color wheel filter change from 0 to 0 08:50:48 FLIGetFilterPos err=0 currentPosition=0 08:50:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:48 Filter is already there-color wheel unchanged 08:50:48 Received message from Master: op=Shutter serial=216052 08:50:48 Shutter LASER open 08:50:48 Received message from Camera: op=State serial=216054 08:50:48 GetSingleValue result=40 Value=cccccccc 08:50:48 SkyScan query 08:50:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:50:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:49 Parameters OK 08:50:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:49 Set A/D data flow result=40 08:50:49 Set A/D channel type result=40 08:50:49 Set A/D encoding result=40 08:50:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:49 Set channel filter=0.000000e+000 result=40 08:50:49 Config A/D Result=40 08:50:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:49 Get A/D filter: -9.255963e+061 result=40 08:50:49 Get A/D value=-858993460 result=40 08:50:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:49 Parameters OK 08:50:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:49 Set A/D data flow result=40 08:50:49 Set A/D channel type result=40 08:50:49 Set A/D encoding result=40 08:50:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:49 Set channel filter=0.000000e+000 result=40 08:50:49 Config A/D Result=40 08:50:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:49 Get A/D filter: -9.255963e+061 result=40 08:50:49 Get A/D value=-858993460 result=40 08:50:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:49 Aux= 08:50:49 Message to Camera, serial 216054 queued 08:50:57 Received message from Master: op=Shutter serial=216064 08:50:57 Shutter LASER close 08:50:58 Received message from Master: op=PointingHead serial=216068 08:50:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:50:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:50:58 Point started: ret=0 08:50:58 point_skyscan result=0 08:50:59 Check angles 08:50:59 SkyScan query 08:50:59 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.07<-21538 Statuses=0009 0009 08:50:59 Msec=0 True Az=136.14 Ze=-143.07 Az status=0009 Ze status=0009 08:50:59 Check angles 08:50:59 SkyScan query 08:51:00 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.68<-20112 Statuses=0009 0009 08:51:00 Msec=750 True Az=153.96 Ze=-121.68 Az status=0009 Ze status=0009 08:51:00 Check angles 08:51:00 SkyScan query 08:51:01 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.665<-18711 Statuses=0009 0009 08:51:01 Msec=1500 True Az=171.435 Ze=-100.665 Az status=0009 Ze status=0009 08:51:01 Check angles 08:51:01 SkyScan query 08:51:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.755<-17317 Statuses=0008 0009 08:51:01 Msec=2250 True Az=176.01 Ze=-79.755 Az status=0008 Ze status=0009 08:51:02 Check angles 08:51:02 SkyScan query 08:51:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.8<-15920 Statuses=0008 0009 08:51:02 Msec=3000 True Az=175.995 Ze=-58.8 Az status=0008 Ze status=0009 08:51:02 Check angles 08:51:02 SkyScan query 08:51:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 08:51:03 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 08:51:03 Message to Master queued w/err=0: serial=216068 error=0 08:51:08 Received message from Master: op=Filter serial=216069 08:51:08 Color wheel filter change from 0 to 0 08:51:08 FLIGetFilterPos err=0 currentPosition=0 08:51:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:08 Filter is already there-color wheel unchanged 08:51:08 Received message from Master: op=Shutter serial=216070 08:51:08 Shutter LASER close 08:51:08 Received message from Camera: op=State serial=216072 08:51:08 GetSingleValue result=40 Value=cccccccc 08:51:08 SkyScan query 08:51:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:51:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:09 Parameters OK 08:51:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:09 Set A/D data flow result=40 08:51:09 Set A/D channel type result=40 08:51:09 Set A/D encoding result=40 08:51:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:09 Set channel filter=0.000000e+000 result=40 08:51:09 Config A/D Result=40 08:51:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:09 Get A/D filter: -9.255963e+061 result=40 08:51:09 Get A/D value=-858993460 result=40 08:51:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:09 Parameters OK 08:51:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:09 Set A/D data flow result=40 08:51:09 Set A/D channel type result=40 08:51:09 Set A/D encoding result=40 08:51:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:09 Set channel filter=0.000000e+000 result=40 08:51:09 Config A/D Result=40 08:51:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:09 Get A/D filter: -9.255963e+061 result=40 08:51:09 Get A/D value=-858993460 result=40 08:51:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:09 Aux= 08:51:09 Message to Camera, serial 216072 queued 08:51:46 Received message from Master: op=PointingHead serial=216085 08:51:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:51:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:51:46 Point started: ret=0 08:51:46 point_skyscan result=0 08:51:47 Check angles 08:51:47 SkyScan query 08:51:47 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.615<-13441 Statuses=0009 0009 08:51:47 Msec=0 True Az=152.745 Ze=-21.615 Az status=0009 Ze status=0009 08:51:48 Check angles 08:51:48 SkyScan query 08:51:48 SkyScan query done: ret=0 az=134.94<-8996 ze=-0.165<-12011 Statuses=0009 0009 08:51:48 Msec=750 True Az=134.94 Ze=-0.165 Az status=0009 Ze status=0009 08:51:48 Check angles 08:51:48 SkyScan query 08:51:49 SkyScan query done: ret=0 az=117.39<-7826 ze=20.775<-10615 Statuses=0009 0009 08:51:49 Msec=1500 True Az=117.39 Ze=20.775 Az status=0009 Ze status=0009 08:51:49 Check angles 08:51:49 SkyScan query 08:51:50 SkyScan query done: ret=0 az=100.035<-6669 ze=41.73<-9218 Statuses=0009 0009 08:51:50 Msec=2250 True Az=100.035 Ze=41.73 Az status=0009 Ze status=0009 08:51:50 Check angles 08:51:50 SkyScan query 08:51:50 SkyScan query done: ret=0 az=86.025<-5735 ze=51.585<-8561 Statuses=0009 0008 08:51:50 Msec=3000 True Az=86.025 Ze=51.585 Az status=0009 Ze status=0008 08:51:51 Check angles 08:51:51 SkyScan query 08:51:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:51:51 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:51:51 Message to Master queued w/err=0: serial=216085 error=0 08:51:56 Received message from Master: op=Filter serial=216086 08:51:56 Color wheel filter change from 0 to 0 08:51:56 FLIGetFilterPos err=0 currentPosition=0 08:51:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:56 Filter is already there-color wheel unchanged 08:51:56 Received message from Master: op=Shutter serial=216087 08:51:56 Shutter LASER close 08:51:56 Received message from Camera: op=State serial=216089 08:51:56 GetSingleValue result=40 Value=cccccccc 08:51:56 SkyScan query 08:51:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:51:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:57 Parameters OK 08:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:57 Set A/D data flow result=40 08:51:57 Set A/D channel type result=40 08:51:57 Set A/D encoding result=40 08:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:57 Set channel filter=0.000000e+000 result=40 08:51:57 Config A/D Result=40 08:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:57 Get A/D filter: -9.255963e+061 result=40 08:51:57 Get A/D value=-858993460 result=40 08:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:57 Parameters OK 08:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:57 Set A/D data flow result=40 08:51:57 Set A/D channel type result=40 08:51:57 Set A/D encoding result=40 08:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:57 Set channel filter=0.000000e+000 result=40 08:51:57 Config A/D Result=40 08:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:57 Get A/D filter: -9.255963e+061 result=40 08:51:57 Get A/D value=-858993460 result=40 08:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:57 Aux= 08:51:57 Message to Camera, serial 216089 queued 08:52:34 Received message from Master: op=PointingHead serial=216102 08:52:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:52:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:52:34 Point started: ret=0 08:52:34 point_skyscan result=0 08:52:35 Check angles 08:52:35 SkyScan query 08:52:35 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 08:52:35 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 08:52:36 Check angles 08:52:36 SkyScan query 08:52:36 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 08:52:36 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 08:52:36 Check angles 08:52:36 SkyScan query 08:52:37 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 08:52:37 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 08:52:37 Check angles 08:52:37 SkyScan query 08:52:38 SkyScan query done: ret=0 az=161.67<-10778 ze=38.505<-9433 Statuses=0009 0008 08:52:38 Msec=2250 True Az=161.67 Ze=38.505 Az status=0009 Ze status=0008 08:52:38 Check angles 08:52:38 SkyScan query 08:52:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:52:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:52:39 Check angles 08:52:39 SkyScan query 08:52:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:52:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:52:39 Message to Master queued w/err=0: serial=216102 error=0 08:52:44 Received message from Master: op=Filter serial=216103 08:52:44 Color wheel filter change from 0 to 0 08:52:44 FLIGetFilterPos err=0 currentPosition=0 08:52:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:44 Filter is already there-color wheel unchanged 08:52:44 Received message from Master: op=Shutter serial=216104 08:52:44 Shutter LASER close 08:52:44 Received message from Camera: op=State serial=216106 08:52:44 GetSingleValue result=40 Value=cccccccc 08:52:44 SkyScan query 08:52:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:52:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:45 Parameters OK 08:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:45 Set A/D data flow result=40 08:52:45 Set A/D channel type result=40 08:52:45 Set A/D encoding result=40 08:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:45 Set channel filter=0.000000e+000 result=40 08:52:45 Config A/D Result=40 08:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:45 Get A/D filter: -9.255963e+061 result=40 08:52:45 Get A/D value=-858993460 result=40 08:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:45 Parameters OK 08:52:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:45 Set A/D data flow result=40 08:52:45 Set A/D channel type result=40 08:52:45 Set A/D encoding result=40 08:52:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:45 Set channel filter=0.000000e+000 result=40 08:52:45 Config A/D Result=40 08:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:45 Get A/D filter: -9.255963e+061 result=40 08:52:45 Get A/D value=-858993460 result=40 08:52:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:45 Aux= 08:52:45 Message to Camera, serial 216106 queued 08:53:22 Received message from Master: op=PointingHead serial=216119 08:53:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:53:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:53:22 Point started: ret=0 08:53:22 point_skyscan result=0 08:53:23 Check angles 08:53:23 SkyScan query 08:53:24 SkyScan query done: ret=0 az=153.15<-10210 ze=8.94<-11404 Statuses=0009 0009 08:53:24 Msec=0 True Az=153.15 Ze=8.94 Az status=0009 Ze status=0009 08:53:24 Check angles 08:53:24 SkyScan query 08:53:24 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.42<-12828 Statuses=0009 0009 08:53:24 Msec=750 True Az=135.315 Ze=-12.42 Az status=0009 Ze status=0009 08:53:25 Check angles 08:53:25 SkyScan query 08:53:25 SkyScan query done: ret=0 az=117.855<-7857 ze=-33.465<-14231 Statuses=0009 0009 08:53:25 Msec=1500 True Az=117.855 Ze=-33.465 Az status=0009 Ze status=0009 08:53:25 Check angles 08:53:25 SkyScan query 08:53:26 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.555<-15437 Statuses=0009 0009 08:53:26 Msec=2250 True Az=100.485 Ze=-51.555 Az status=0009 Ze status=0009 08:53:26 Check angles 08:53:26 SkyScan query 08:53:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 08:53:27 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 08:53:27 Check angles 08:53:27 SkyScan query 08:53:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:53:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:53:27 Message to Master queued w/err=0: serial=216119 error=0 08:53:32 Received message from Master: op=Filter serial=216120 08:53:32 Color wheel filter change from 0 to 0 08:53:32 FLIGetFilterPos err=0 currentPosition=0 08:53:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:32 Filter is already there-color wheel unchanged 08:53:33 Received message from Master: op=Shutter serial=216121 08:53:33 Shutter LASER close 08:53:33 Received message from Camera: op=State serial=216123 08:53:33 GetSingleValue result=40 Value=cccccccc 08:53:33 SkyScan query 08:53:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:53:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:33 Parameters OK 08:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:33 Set A/D data flow result=40 08:53:33 Set A/D channel type result=40 08:53:33 Set A/D encoding result=40 08:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:33 Set channel filter=0.000000e+000 result=40 08:53:33 Config A/D Result=40 08:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:33 Get A/D filter: -9.255963e+061 result=40 08:53:33 Get A/D value=-858993460 result=40 08:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:33 Parameters OK 08:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:33 Set A/D data flow result=40 08:53:33 Set A/D channel type result=40 08:53:33 Set A/D encoding result=40 08:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:33 Set channel filter=0.000000e+000 result=40 08:53:33 Config A/D Result=40 08:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:33 Get A/D filter: -9.255963e+061 result=40 08:53:33 Get A/D value=-858993460 result=40 08:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:33 Aux= 08:53:33 Message to Camera, serial 216123 queued 08:54:09 Received message from Master: op=PointingHead serial=216135 08:54:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:54:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:54:09 Point started: ret=0 08:54:09 point_skyscan result=0 08:54:10 Check angles 08:54:10 SkyScan query 08:54:11 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.27<-17418 Statuses=0009 0009 08:54:11 Msec=0 True Az=108.975 Ze=-81.27 Az status=0009 Ze status=0009 08:54:11 Check angles 08:54:11 SkyScan query 08:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.24<-18816 Statuses=0008 0009 08:54:12 Msec=750 True Az=112.995 Ze=-102.24 Az status=0008 Ze status=0009 08:54:12 Check angles 08:54:12 SkyScan query 08:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.195<-20213 Statuses=0008 0009 08:54:12 Msec=1500 True Az=112.995 Ze=-123.195 Az status=0008 Ze status=0009 08:54:12 Check angles 08:54:12 SkyScan query 08:54:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.135<-21609 Statuses=0008 0009 08:54:13 Msec=2250 True Az=112.995 Ze=-144.135 Az status=0008 Ze status=0009 08:54:13 Check angles 08:54:13 SkyScan query 08:54:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.105<-23007 Statuses=0008 0009 08:54:14 Msec=3000 True Az=112.995 Ze=-165.105 Az status=0008 Ze status=0009 08:54:14 Check angles 08:54:14 SkyScan query 08:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:54:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:54:15 Message to Master queued w/err=0: serial=216135 error=0 08:54:20 Received message from Master: op=Filter serial=216136 08:54:20 Color wheel filter change from 0 to 0 08:54:20 FLIGetFilterPos err=0 currentPosition=0 08:54:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:20 Filter is already there-color wheel unchanged 08:54:20 Received message from Master: op=Shutter serial=216137 08:54:20 Shutter LASER open 08:54:20 Received message from Camera: op=State serial=216139 08:54:20 GetSingleValue result=40 Value=cccccccc 08:54:20 SkyScan query 08:54:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:54:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:20 Parameters OK 08:54:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:20 Set A/D data flow result=40 08:54:20 Set A/D channel type result=40 08:54:20 Set A/D encoding result=40 08:54:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:20 Set channel filter=0.000000e+000 result=40 08:54:20 Config A/D Result=40 08:54:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:20 Get A/D filter: -9.255963e+061 result=40 08:54:20 Get A/D value=-858993460 result=40 08:54:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:20 Parameters OK 08:54:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:20 Set A/D data flow result=40 08:54:20 Set A/D channel type result=40 08:54:20 Set A/D encoding result=40 08:54:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:20 Set channel filter=0.000000e+000 result=40 08:54:20 Config A/D Result=40 08:54:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:20 Get A/D filter: -9.255963e+061 result=40 08:54:20 Get A/D value=-858993460 result=40 08:54:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:20 Aux= 08:54:20 Message to Camera, serial 216139 queued 08:54:29 Received message from Master: op=Shutter serial=216149 08:54:29 Shutter LASER close 08:54:29 Received message from Master: op=PointingHead serial=216153 08:54:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:54:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:54:30 Point started: ret=0 08:54:30 point_skyscan result=0 08:54:30 Check angles 08:54:30 SkyScan query 08:54:31 SkyScan query done: ret=0 az=89.595<-5973 ze=156.765<-1549 Statuses=0009 0009 08:54:31 Msec=0 True Az=89.595 Ze=156.765 Az status=0009 Ze status=0009 08:54:31 Check angles 08:54:31 SkyScan query 08:54:32 SkyScan query done: ret=0 az=72.045<-4803 ze=135.825<-2945 Statuses=0009 0009 08:54:32 Msec=750 True Az=72.045 Ze=135.825 Az status=0009 Ze status=0009 08:54:32 Check angles 08:54:32 SkyScan query 08:54:33 SkyScan query done: ret=0 az=54.75<-3650 ze=114.855<-4343 Statuses=0009 0009 08:54:33 Msec=1500 True Az=54.75 Ze=114.855 Az status=0009 Ze status=0009 08:54:33 Check angles 08:54:33 SkyScan query 08:54:33 SkyScan query done: ret=0 az=40.98<-2732 ze=93.915<-5739 Statuses=0009 0009 08:54:33 Msec=2250 True Az=40.98 Ze=93.915 Az status=0009 Ze status=0009 08:54:33 Check angles 08:54:33 SkyScan query 08:54:34 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 08:54:34 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 08:54:34 Check angles 08:54:34 SkyScan query 08:54:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 08:54:35 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 08:54:35 Check angles 08:54:35 SkyScan query 08:54:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:54:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:54:36 Message to Master queued w/err=0: serial=216153 error=0 08:54:41 Received message from Master: op=Filter serial=216154 08:54:41 Color wheel filter change from 0 to 0 08:54:41 FLIGetFilterPos err=0 currentPosition=0 08:54:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:41 Filter is already there-color wheel unchanged 08:54:41 Received message from Master: op=Shutter serial=216155 08:54:41 Shutter LASER close 08:54:41 Received message from Camera: op=State serial=216157 08:54:41 GetSingleValue result=40 Value=cccccccc 08:54:41 SkyScan query 08:54:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:54:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:41 Parameters OK 08:54:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:41 Set A/D data flow result=40 08:54:41 Set A/D channel type result=40 08:54:41 Set A/D encoding result=40 08:54:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:41 Set channel filter=0.000000e+000 result=40 08:54:41 Config A/D Result=40 08:54:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:41 Get A/D filter: -9.255963e+061 result=40 08:54:41 Get A/D value=-858993460 result=40 08:54:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:41 Parameters OK 08:54:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:41 Set A/D data flow result=40 08:54:41 Set A/D channel type result=40 08:54:41 Set A/D encoding result=40 08:54:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:41 Set channel filter=0.000000e+000 result=40 08:54:41 Config A/D Result=40 08:54:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:41 Get A/D filter: -9.255963e+061 result=40 08:54:41 Get A/D value=-858993460 result=40 08:54:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:41 Aux= 08:54:41 Message to Camera, serial 216157 queued 08:55:18 Received message from Master: op=PointingHead serial=216170 08:55:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:55:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:55:19 Point started: ret=0 08:55:19 point_skyscan result=0 08:55:19 Check angles 08:55:19 SkyScan query 08:55:20 SkyScan query done: ret=0 az=63.96<-4264 ze=66.51<-7566 Statuses=0009 0008 08:55:20 Msec=0 True Az=63.96 Ze=66.51 Az status=0009 Ze status=0008 08:55:20 Check angles 08:55:20 SkyScan query 08:55:21 SkyScan query done: ret=0 az=81.405<-5427 ze=66.51<-7566 Statuses=0009 0008 08:55:21 Msec=750 True Az=81.405 Ze=66.51 Az status=0009 Ze status=0008 08:55:21 Check angles 08:55:21 SkyScan query 08:55:21 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 08:55:21 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 08:55:22 Check angles 08:55:22 SkyScan query 08:55:22 SkyScan query done: ret=0 az=116.34<-7756 ze=66.495<-7567 Statuses=0009 0008 08:55:22 Msec=2250 True Az=116.34 Ze=66.495 Az status=0009 Ze status=0008 08:55:22 Check angles 08:55:22 SkyScan query 08:55:23 SkyScan query done: ret=0 az=134.25<-8950 ze=66.495<-7567 Statuses=0009 0008 08:55:23 Msec=3000 True Az=134.25 Ze=66.495 Az status=0009 Ze status=0008 08:55:23 Check angles 08:55:23 SkyScan query 08:55:24 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 08:55:24 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 08:55:24 Check angles 08:55:24 SkyScan query 08:55:24 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:55:24 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:55:24 Message to Master queued w/err=0: serial=216170 error=0 08:55:29 Received message from Master: op=Filter serial=216171 08:55:29 Color wheel filter change from 0 to 0 08:55:29 FLIGetFilterPos err=0 currentPosition=0 08:55:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:29 Filter is already there-color wheel unchanged 08:55:30 Received message from Master: op=Shutter serial=216172 08:55:30 Shutter LASER close 08:55:30 Received message from Camera: op=State serial=216174 08:55:30 GetSingleValue result=40 Value=cccccccc 08:55:30 SkyScan query 08:55:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:55:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:30 Parameters OK 08:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:30 Set A/D data flow result=40 08:55:30 Set A/D channel type result=40 08:55:30 Set A/D encoding result=40 08:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:30 Set channel filter=0.000000e+000 result=40 08:55:30 Config A/D Result=40 08:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:30 Get A/D filter: -9.255963e+061 result=40 08:55:30 Get A/D value=-858993460 result=40 08:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:30 Parameters OK 08:55:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:30 Set A/D data flow result=40 08:55:30 Set A/D channel type result=40 08:55:30 Set A/D encoding result=40 08:55:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:30 Set channel filter=0.000000e+000 result=40 08:55:30 Config A/D Result=40 08:55:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-17 08:55:30] 08:55:30 Get A/D filter: -9.255963e+061 result=40 08:55:30 Get A/D value=-858993460 result=40 08:55:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:30 Aux= 08:55:30 Message to Camera, serial 216174 queued [UTC 2018-12-17 08:55:52] 08:56:07 Received message from Master: op=PointingHead serial=216187 08:56:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:56:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:56:08 Point started: ret=0 08:56:08 point_skyscan result=0 08:56:08 Check angles 08:56:08 SkyScan query 08:56:09 SkyScan query done: ret=0 az=134.985<-8999 ze=96.3<-5580 Statuses=0009 0009 08:56:09 Msec=0 True Az=134.985 Ze=96.3 Az status=0009 Ze status=0009 08:56:09 Check angles 08:56:09 SkyScan query 08:56:10 SkyScan query done: ret=0 az=130.995<-8733 ze=117.675<-4155 Statuses=0008 0009 08:56:10 Msec=750 True Az=130.995 Ze=117.675 Az status=0008 Ze status=0009 08:56:10 Check angles 08:56:10 SkyScan query 08:56:10 SkyScan query done: ret=0 az=130.995<-8733 ze=139.095<-2727 Statuses=0008 0009 08:56:10 Msec=1500 True Az=130.995 Ze=139.095 Az status=0008 Ze status=0009 08:56:11 Check angles 08:56:11 SkyScan query 08:56:11 SkyScan query done: ret=0 az=130.995<-8733 ze=160.02<-1332 Statuses=0008 0009 08:56:11 Msec=2250 True Az=130.995 Ze=160.02 Az status=0008 Ze status=0009 08:56:11 Check angles 08:56:11 SkyScan query 08:56:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.025<-23935 Statuses=0008 0009 08:56:12 Msec=3000 True Az=130.995 Ze=-179.025 Az status=0008 Ze status=0009 08:56:12 Check angles 08:56:12 SkyScan query 08:56:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.07<-22538 Statuses=0008 0009 08:56:13 Msec=3750 True Az=130.995 Ze=-158.07 Az status=0008 Ze status=0009 08:56:13 Check angles 08:56:13 SkyScan query 08:56:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 08:56:13 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 08:56:14 Check angles 08:56:14 SkyScan query 08:56:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 08:56:14 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 08:56:14 Message to Master queued w/err=0: serial=216187 error=0 08:56:19 Received message from Master: op=Filter serial=216188 08:56:19 Color wheel filter change from 0 to 0 08:56:19 FLIGetFilterPos err=0 currentPosition=0 08:56:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:19 Filter is already there-color wheel unchanged 08:56:19 Received message from Master: op=Shutter serial=216189 08:56:19 Shutter LASER close 08:56:19 Received message from Camera: op=State serial=216191 08:56:19 GetSingleValue result=40 Value=cccccccc 08:56:19 SkyScan query 08:56:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:56:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:20 Parameters OK 08:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:20 Set A/D data flow result=40 08:56:20 Set A/D channel type result=40 08:56:20 Set A/D encoding result=40 08:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:20 Set channel filter=0.000000e+000 result=40 08:56:20 Config A/D Result=40 08:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:20 Get A/D filter: -9.255963e+061 result=40 08:56:20 Get A/D value=-858993460 result=40 08:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:20 Parameters OK 08:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:20 Set A/D data flow result=40 08:56:20 Set A/D channel type result=40 08:56:20 Set A/D encoding result=40 08:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:20 Set channel filter=0.000000e+000 result=40 08:56:20 Config A/D Result=40 08:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:20 Get A/D filter: -9.255963e+061 result=40 08:56:20 Get A/D value=-858993460 result=40 08:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:20 Aux= 08:56:20 Message to Camera, serial 216191 queued 08:56:57 Received message from Master: op=PointingHead serial=216204 08:56:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:56:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:56:57 Point started: ret=0 08:56:57 point_skyscan result=0 08:56:58 Check angles 08:56:58 SkyScan query 08:56:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 08:56:58 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 08:56:59 Check angles 08:56:59 SkyScan query 08:56:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:56:59 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:56:59 Message to Master queued w/err=0: serial=216204 error=0 08:57:04 Received message from Master: op=Filter serial=216205 08:57:04 Color wheel filter change from 0 to 0 08:57:04 FLIGetFilterPos err=0 currentPosition=0 08:57:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:04 Filter is already there-color wheel unchanged 08:57:04 Received message from Master: op=Shutter serial=216206 08:57:04 Shutter LASER open 08:57:05 Received message from Camera: op=State serial=216208 08:57:05 GetSingleValue result=40 Value=cccccccc 08:57:05 SkyScan query 08:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:57:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:05 Parameters OK 08:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:05 Set A/D data flow result=40 08:57:05 Set A/D channel type result=40 08:57:05 Set A/D encoding result=40 08:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:05 Set channel filter=0.000000e+000 result=40 08:57:05 Config A/D Result=40 08:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:05 Get A/D filter: -9.255963e+061 result=40 08:57:05 Get A/D value=-858993460 result=40 08:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:05 Parameters OK 08:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:05 Set A/D data flow result=40 08:57:05 Set A/D channel type result=40 08:57:05 Set A/D encoding result=40 08:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:05 Set channel filter=0.000000e+000 result=40 08:57:05 Config A/D Result=40 08:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:05 Get A/D filter: -9.255963e+061 result=40 08:57:05 Get A/D value=-858993460 result=40 08:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:05 Aux= 08:57:05 Message to Camera, serial 216208 queued 08:57:14 Received message from Master: op=Shutter serial=216218 08:57:14 Shutter LASER close 08:57:14 Received message from Master: op=PointingHead serial=216222 08:57:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:57:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:57:15 Point started: ret=0 08:57:15 point_skyscan result=0 08:57:15 Check angles 08:57:15 SkyScan query 08:57:16 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.565<-21571 Statuses=0009 0009 08:57:16 Msec=0 True Az=135.72 Ze=-143.565 Az status=0009 Ze status=0009 08:57:16 Check angles 08:57:16 SkyScan query 08:57:17 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.145<-20143 Statuses=0009 0009 08:57:17 Msec=750 True Az=153.645 Ze=-122.145 Az status=0009 Ze status=0009 08:57:17 Check angles 08:57:17 SkyScan query 08:57:17 SkyScan query done: ret=0 az=171.15<-11410 ze=-101.28<-18752 Statuses=0009 0009 08:57:17 Msec=1500 True Az=171.15 Ze=-101.28 Az status=0009 Ze status=0009 08:57:18 Check angles 08:57:18 SkyScan query 08:57:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.28<-17352 Statuses=0008 0009 08:57:18 Msec=2250 True Az=175.995 Ze=-80.28 Az status=0008 Ze status=0009 08:57:18 Check angles 08:57:18 SkyScan query 08:57:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.325<-15955 Statuses=0008 0009 08:57:19 Msec=3000 True Az=175.995 Ze=-59.325 Az status=0008 Ze status=0009 08:57:19 Check angles 08:57:19 SkyScan query 08:57:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 08:57:20 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 08:57:20 Message to Master queued w/err=0: serial=216222 error=0 08:57:25 Received message from Master: op=Filter serial=216223 08:57:25 Color wheel filter change from 0 to 0 08:57:25 FLIGetFilterPos err=0 currentPosition=0 08:57:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:25 Filter is already there-color wheel unchanged 08:57:25 Received message from Master: op=Shutter serial=216224 08:57:25 Shutter LASER close 08:57:25 Received message from Camera: op=State serial=216226 08:57:25 GetSingleValue result=40 Value=cccccccc 08:57:25 SkyScan query 08:57:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:57:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:26 Parameters OK 08:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:26 Set A/D data flow result=40 08:57:26 Set A/D channel type result=40 08:57:26 Set A/D encoding result=40 08:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:26 Set channel filter=0.000000e+000 result=40 08:57:26 Config A/D Result=40 08:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:26 Get A/D filter: -9.255963e+061 result=40 08:57:26 Get A/D value=-858993460 result=40 08:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:26 Parameters OK 08:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:26 Set A/D data flow result=40 08:57:26 Set A/D channel type result=40 08:57:26 Set A/D encoding result=40 08:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:26 Set channel filter=0.000000e+000 result=40 08:57:26 Config A/D Result=40 08:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:26 Get A/D filter: -9.255963e+061 result=40 08:57:26 Get A/D value=-858993460 result=40 08:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:26 Aux= 08:57:26 Message to Camera, serial 216226 queued 08:58:02 Received message from Master: op=PointingHead serial=216239 08:58:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:58:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:58:03 Point started: ret=0 08:58:03 point_skyscan result=0 08:58:04 Check angles 08:58:04 SkyScan query 08:58:04 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.405<-13427 Statuses=0009 0009 08:58:04 Msec=0 True Az=152.76 Ze=-21.405 Az status=0009 Ze status=0009 08:58:04 Check angles 08:58:04 SkyScan query 08:58:05 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.435<-12029 Statuses=0009 0009 08:58:05 Msec=750 True Az=135.3 Ze=-0.435 Az status=0009 Ze status=0009 08:58:05 Check angles 08:58:05 SkyScan query 08:58:06 SkyScan query done: ret=0 az=117.78<-7852 ze=20.445<-10637 Statuses=0009 0009 08:58:06 Msec=1500 True Az=117.78 Ze=20.445 Az status=0009 Ze status=0009 08:58:06 Check angles 08:58:06 SkyScan query 08:58:06 SkyScan query done: ret=0 az=100.425<-6695 ze=41.46<-9236 Statuses=0009 0009 08:58:06 Msec=2250 True Az=100.425 Ze=41.46 Az status=0009 Ze status=0009 08:58:07 Check angles 08:58:07 SkyScan query 08:58:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.585<-8561 Statuses=0009 0008 08:58:07 Msec=3000 True Az=85.995 Ze=51.585 Az status=0009 Ze status=0008 08:58:07 Check angles 08:58:07 SkyScan query 08:58:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:58:08 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:58:08 Message to Master queued w/err=0: serial=216239 error=0 08:58:13 Received message from Master: op=Filter serial=216240 08:58:13 Color wheel filter change from 0 to 0 08:58:13 FLIGetFilterPos err=0 currentPosition=0 08:58:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:13 Filter is already there-color wheel unchanged 08:58:13 Received message from Master: op=Shutter serial=216241 08:58:13 Shutter LASER close 08:58:13 Received message from Camera: op=State serial=216243 08:58:13 GetSingleValue result=40 Value=cccccccc 08:58:13 SkyScan query 08:58:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:58:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:14 Parameters OK 08:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:14 Set A/D data flow result=40 08:58:14 Set A/D channel type result=40 08:58:14 Set A/D encoding result=40 08:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:14 Set channel filter=0.000000e+000 result=40 08:58:14 Config A/D Result=40 08:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:14 Get A/D filter: -9.255963e+061 result=40 08:58:14 Get A/D value=-858993460 result=40 08:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:14 Parameters OK 08:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:14 Set A/D data flow result=40 08:58:14 Set A/D channel type result=40 08:58:14 Set A/D encoding result=40 08:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:14 Set channel filter=0.000000e+000 result=40 08:58:14 Config A/D Result=40 08:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:14 Get A/D filter: -9.255963e+061 result=40 08:58:14 Get A/D value=-858993460 result=40 08:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:14 Aux= 08:58:14 Message to Camera, serial 216243 queued 08:58:50 Received message from Master: op=PointingHead serial=216256 08:58:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:58:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:58:51 Point started: ret=0 08:58:51 point_skyscan result=0 08:58:52 Check angles 08:58:52 SkyScan query 08:58:52 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 08:58:52 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 08:58:52 Check angles 08:58:52 SkyScan query 08:58:53 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 08:58:53 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 08:58:53 Check angles 08:58:53 SkyScan query 08:58:54 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 08:58:54 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 08:58:54 Check angles 08:58:54 SkyScan query 08:58:54 SkyScan query done: ret=0 az=162.39<-10826 ze=38.505<-9433 Statuses=0009 0008 08:58:54 Msec=2250 True Az=162.39 Ze=38.505 Az status=0009 Ze status=0008 08:58:55 Check angles 08:58:55 SkyScan query 08:58:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 08:58:55 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 08:58:55 Check angles 08:58:55 SkyScan query 08:58:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:58:56 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:58:56 Message to Master queued w/err=0: serial=216256 error=0 08:59:01 Received message from Master: op=Filter serial=216257 08:59:01 Color wheel filter change from 0 to 0 08:59:01 FLIGetFilterPos err=0 currentPosition=0 08:59:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:01 Filter is already there-color wheel unchanged 08:59:01 Received message from Master: op=Shutter serial=216258 08:59:01 Shutter LASER close 08:59:01 Received message from Camera: op=State serial=216260 08:59:01 GetSingleValue result=40 Value=cccccccc 08:59:01 SkyScan query 08:59:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:59:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:02 Parameters OK 08:59:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:02 Set A/D data flow result=40 08:59:02 Set A/D channel type result=40 08:59:02 Set A/D encoding result=40 08:59:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:02 Set channel filter=0.000000e+000 result=40 08:59:02 Config A/D Result=40 08:59:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:02 Get A/D filter: -9.255963e+061 result=40 08:59:02 Get A/D value=-858993460 result=40 08:59:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:02 Parameters OK 08:59:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:02 Set A/D data flow result=40 08:59:02 Set A/D channel type result=40 08:59:02 Set A/D encoding result=40 08:59:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:02 Set channel filter=0.000000e+000 result=40 08:59:02 Config A/D Result=40 08:59:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:02 Get A/D filter: -9.255963e+061 result=40 08:59:02 Get A/D value=-858993460 result=40 08:59:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:02 Aux= 08:59:02 Message to Camera, serial 216260 queued 08:59:39 Received message from Master: op=PointingHead serial=216273 08:59:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:59:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:59:39 Point started: ret=0 08:59:39 point_skyscan result=0 08:59:40 Check angles 08:59:40 SkyScan query 08:59:40 SkyScan query done: ret=0 az=152.745<-10183 ze=8.385<-11441 Statuses=0009 0009 08:59:40 Msec=0 True Az=152.745 Ze=8.385 Az status=0009 Ze status=0009 08:59:40 Check angles 08:59:40 SkyScan query 08:59:41 SkyScan query done: ret=0 az=134.955<-8997 ze=-12.945<-12863 Statuses=0009 0009 08:59:41 Msec=750 True Az=134.955 Ze=-12.945 Az status=0009 Ze status=0009 08:59:41 Check angles 08:59:41 SkyScan query 08:59:42 SkyScan query done: ret=0 az=117.405<-7827 ze=-33.96<-14264 Statuses=0009 0009 08:59:42 Msec=1500 True Az=117.405 Ze=-33.96 Az status=0009 Ze status=0009 08:59:42 Check angles 08:59:42 SkyScan query 08:59:43 SkyScan query done: ret=0 az=99.675<-6645 ze=-51.57<-15438 Statuses=0009 0009 08:59:43 Msec=2250 True Az=99.675 Ze=-51.57 Az status=0009 Ze status=0009 08:59:43 Check angles 08:59:43 SkyScan query 08:59:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 08:59:43 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 08:59:44 Check angles 08:59:44 SkyScan query 08:59:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:59:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:59:44 Message to Master queued w/err=0: serial=216273 error=0 08:59:49 Received message from Master: op=Filter serial=216274 08:59:49 Color wheel filter change from 0 to 0 08:59:49 FLIGetFilterPos err=0 currentPosition=0 08:59:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:49 Filter is already there-color wheel unchanged 08:59:49 Received message from Master: op=Shutter serial=216275 08:59:49 Shutter LASER close 08:59:49 Received message from Camera: op=State serial=216277 08:59:49 GetSingleValue result=40 Value=cccccccc 08:59:49 SkyScan query 08:59:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:59:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:50 Parameters OK 08:59:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:50 Set A/D data flow result=40 08:59:50 Set A/D channel type result=40 08:59:50 Set A/D encoding result=40 08:59:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:50 Set channel filter=0.000000e+000 result=40 08:59:50 Config A/D Result=40 08:59:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:50 Get A/D filter: -9.255963e+061 result=40 08:59:50 Get A/D value=-858993460 result=40 08:59:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:50 Parameters OK 08:59:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:50 Set A/D data flow result=40 08:59:50 Set A/D channel type result=40 08:59:50 Set A/D encoding result=40 08:59:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:50 Set channel filter=0.000000e+000 result=40 08:59:50 Config A/D Result=40 08:59:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:50 Get A/D filter: -9.255963e+061 result=40 08:59:50 Get A/D value=-858993460 result=40 08:59:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:50 Aux= 08:59:50 Message to Camera, serial 216277 queued 09:00:27 Received message from Master: op=PointingHead serial=216290 09:00:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:00:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:00:27 Point started: ret=0 09:00:27 point_skyscan result=0 09:00:28 Check angles 09:00:28 SkyScan query 09:00:28 SkyScan query done: ret=0 az=109.47<-7298 ze=-81.84<-17456 Statuses=0009 0009 09:00:28 Msec=0 True Az=109.47 Ze=-81.84 Az status=0009 Ze status=0009 09:00:29 Check angles 09:00:29 SkyScan query 09:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.17<-18878 Statuses=0008 0009 09:00:29 Msec=750 True Az=112.995 Ze=-103.17 Az status=0008 Ze status=0009 09:00:29 Check angles 09:00:29 SkyScan query 09:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.125<-20275 Statuses=0008 0009 09:00:30 Msec=1500 True Az=112.995 Ze=-124.125 Az status=0008 Ze status=0009 09:00:30 Check angles 09:00:30 SkyScan query 09:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.575<-21705 Statuses=0008 0009 09:00:31 Msec=2250 True Az=112.995 Ze=-145.575 Az status=0008 Ze status=0009 09:00:31 Check angles 09:00:31 SkyScan query 09:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.95<-23130 Statuses=0008 0009 09:00:31 Msec=3000 True Az=112.995 Ze=-166.95 Az status=0008 Ze status=0009 09:00:32 Check angles 09:00:32 SkyScan query 09:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:00:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:00:32 Message to Master queued w/err=0: serial=216290 error=0 09:00:37 Received message from Master: op=Filter serial=216291 09:00:37 Color wheel filter change from 0 to 0 09:00:37 FLIGetFilterPos err=0 currentPosition=0 09:00:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:37 Filter is already there-color wheel unchanged 09:00:37 Received message from Master: op=Shutter serial=216292 09:00:37 Shutter LASER open 09:00:38 Received message from Camera: op=State serial=216294 09:00:38 GetSingleValue result=40 Value=cccccccc 09:00:38 SkyScan query 09:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:00:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:38 Parameters OK 09:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:38 Set A/D data flow result=40 09:00:38 Set A/D channel type result=40 09:00:38 Set A/D encoding result=40 09:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:38 Set channel filter=0.000000e+000 result=40 09:00:38 Config A/D Result=40 09:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:38 Get A/D filter: -9.255963e+061 result=40 09:00:38 Get A/D value=-858993460 result=40 09:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:38 Parameters OK 09:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:38 Set A/D data flow result=40 09:00:38 Set A/D channel type result=40 09:00:38 Set A/D encoding result=40 09:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:38 Set channel filter=0.000000e+000 result=40 09:00:38 Config A/D Result=40 09:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:38 Get A/D filter: -9.255963e+061 result=40 09:00:38 Get A/D value=-858993460 result=40 09:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:38 Aux= 09:00:38 Message to Camera, serial 216294 queued 09:00:47 Received message from Master: op=Shutter serial=216304 09:00:47 Shutter LASER close 09:00:47 Received message from Master: op=PointingHead serial=216308 09:00:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:00:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:00:47 Point started: ret=0 09:00:47 point_skyscan result=0 09:00:48 Check angles 09:00:48 SkyScan query 09:00:49 SkyScan query done: ret=0 az=89.61<-5974 ze=156.855<-1543 Statuses=0009 0009 09:00:49 Msec=0 True Az=89.61 Ze=156.855 Az status=0009 Ze status=0009 09:00:49 Check angles 09:00:49 SkyScan query 09:00:49 SkyScan query done: ret=0 az=71.61<-4774 ze=135.48<-2968 Statuses=0009 0009 09:00:49 Msec=750 True Az=71.61 Ze=135.48 Az status=0009 Ze status=0009 09:00:50 Check angles 09:00:50 SkyScan query 09:00:50 SkyScan query done: ret=0 az=54.345<-3623 ze=114.465<-4369 Statuses=0009 0009 09:00:50 Msec=1500 True Az=54.345 Ze=114.465 Az status=0009 Ze status=0009 09:00:50 Check angles 09:00:50 SkyScan query 09:00:51 SkyScan query done: ret=0 az=40.98<-2732 ze=93.57<-5762 Statuses=0009 0009 09:00:51 Msec=2250 True Az=40.98 Ze=93.57 Az status=0009 Ze status=0009 09:00:51 Check angles 09:00:51 SkyScan query 09:00:52 SkyScan query done: ret=0 az=40.995<-2733 ze=72.57<-7162 Statuses=0008 0009 09:00:52 Msec=3000 True Az=40.995 Ze=72.57 Az status=0008 Ze status=0009 09:00:52 Check angles 09:00:52 SkyScan query 09:00:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 09:00:52 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 09:00:53 Check angles 09:00:53 SkyScan query 09:00:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:00:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:00:53 Message to Master queued w/err=0: serial=216308 error=0 09:00:58 Received message from Master: op=Filter serial=216309 09:00:58 Color wheel filter change from 0 to 0 09:00:58 FLIGetFilterPos err=0 currentPosition=0 09:00:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:58 Filter is already there-color wheel unchanged 09:00:58 Received message from Master: op=Shutter serial=216310 09:00:58 Shutter LASER close 09:00:59 Received message from Camera: op=State serial=216312 09:00:59 GetSingleValue result=40 Value=cccccccc 09:00:59 SkyScan query 09:00:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:00:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:59 Parameters OK 09:00:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:59 Set A/D data flow result=40 09:00:59 Set A/D channel type result=40 09:00:59 Set A/D encoding result=40 09:00:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:59 Set channel filter=0.000000e+000 result=40 09:00:59 Config A/D Result=40 09:00:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:59 Get A/D filter: -9.255963e+061 result=40 09:00:59 Get A/D value=-858993460 result=40 09:00:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:59 Parameters OK 09:00:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:59 Set A/D data flow result=40 09:00:59 Set A/D channel type result=40 09:00:59 Set A/D encoding result=40 09:00:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:59 Set channel filter=0.000000e+000 result=40 09:00:59 Config A/D Result=40 09:00:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:59 Get A/D filter: -9.255963e+061 result=40 09:00:59 Get A/D value=-858993460 result=40 09:00:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:59 Aux= 09:00:59 Message to Camera, serial 216312 queued 09:01:36 Received message from Master: op=PointingHead serial=216325 09:01:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:01:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:01:36 Point started: ret=0 09:01:36 point_skyscan result=0 09:01:37 Check angles 09:01:37 SkyScan query 09:01:38 SkyScan query done: ret=0 az=63.75<-4250 ze=66.51<-7566 Statuses=0009 0008 09:01:38 Msec=0 True Az=63.75 Ze=66.51 Az status=0009 Ze status=0008 09:01:38 Check angles 09:01:38 SkyScan query 09:01:38 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 09:01:38 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 09:01:39 Check angles 09:01:39 SkyScan query 09:01:39 SkyScan query done: ret=0 az=99.54<-6636 ze=66.495<-7567 Statuses=0009 0008 09:01:39 Msec=1500 True Az=99.54 Ze=66.495 Az status=0009 Ze status=0008 09:01:39 Check angles 09:01:39 SkyScan query 09:01:40 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 09:01:40 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 09:01:40 Check angles 09:01:40 SkyScan query 09:01:41 SkyScan query done: ret=0 az=134.775<-8985 ze=66.495<-7567 Statuses=0009 0008 09:01:41 Msec=3000 True Az=134.775 Ze=66.495 Az status=0009 Ze status=0008 09:01:41 Check angles 09:01:41 SkyScan query 09:01:41 SkyScan query done: ret=0 az=152.52<-10168 ze=66.495<-7567 Statuses=0009 0008 09:01:41 Msec=3750 True Az=152.52 Ze=66.495 Az status=0009 Ze status=0008 09:01:42 Check angles 09:01:42 SkyScan query 09:01:42 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:01:42 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:01:42 Message to Master queued w/err=0: serial=216325 error=0 09:01:47 Received message from Master: op=Filter serial=216326 09:01:47 Color wheel filter change from 0 to 0 09:01:47 FLIGetFilterPos err=0 currentPosition=0 09:01:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:47 Filter is already there-color wheel unchanged 09:01:47 Received message from Master: op=Shutter serial=216327 09:01:47 Shutter LASER close 09:01:47 Received message from Camera: op=State serial=216329 09:01:47 GetSingleValue result=40 Value=cccccccc 09:01:47 SkyScan query 09:01:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:48 Parameters OK 09:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:48 Set A/D data flow result=40 09:01:48 Set A/D channel type result=40 09:01:48 Set A/D encoding result=40 09:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:48 Set channel filter=0.000000e+000 result=40 09:01:48 Config A/D Result=40 09:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:48 Get A/D filter: -9.255963e+061 result=40 09:01:48 Get A/D value=-858993460 result=40 09:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:48 Parameters OK 09:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:48 Set A/D data flow result=40 09:01:48 Set A/D channel type result=40 09:01:48 Set A/D encoding result=40 09:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:48 Set channel filter=0.000000e+000 result=40 09:01:48 Config A/D Result=40 09:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:48 Get A/D filter: -9.255963e+061 result=40 09:01:48 Get A/D value=-858993460 result=40 09:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:48 Aux= 09:01:48 Message to Camera, serial 216329 queued 09:02:25 Received message from Master: op=PointingHead serial=216342 09:02:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:02:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:02:25 Point started: ret=0 09:02:25 point_skyscan result=0 09:02:26 Check angles 09:02:26 SkyScan query 09:02:27 SkyScan query done: ret=0 az=134.61<-8974 ze=96.615<-5559 Statuses=0009 0009 09:02:27 Msec=0 True Az=134.61 Ze=96.615 Az status=0009 Ze status=0009 09:02:27 Check angles 09:02:27 SkyScan query 09:02:27 SkyScan query done: ret=0 az=130.995<-8733 ze=117.57<-4162 Statuses=0008 0009 09:02:27 Msec=750 True Az=130.995 Ze=117.57 Az status=0008 Ze status=0009 09:02:28 Check angles 09:02:28 SkyScan query 09:02:28 SkyScan query done: ret=0 az=130.995<-8733 ze=138.945<-2737 Statuses=0008 0009 09:02:28 Msec=1500 True Az=130.995 Ze=138.945 Az status=0008 Ze status=0009 09:02:28 Check angles 09:02:28 SkyScan query 09:02:29 SkyScan query done: ret=0 az=130.995<-8733 ze=159.87<-1342 Statuses=0008 0009 09:02:29 Msec=2250 True Az=130.995 Ze=159.87 Az status=0008 Ze status=0009 09:02:29 Check angles 09:02:29 SkyScan query 09:02:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.145<-23943 Statuses=0008 0009 09:02:30 Msec=3000 True Az=130.995 Ze=-179.145 Az status=0008 Ze status=0009 09:02:30 Check angles 09:02:30 SkyScan query 09:02:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.205<-22547 Statuses=0008 0009 09:02:30 Msec=3750 True Az=130.995 Ze=-158.205 Az status=0008 Ze status=0009 09:02:31 Check angles 09:02:31 SkyScan query 09:02:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 09:02:31 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 09:02:31 Check angles 09:02:31 SkyScan query 09:02:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:02:32 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:02:32 Message to Master queued w/err=0: serial=216342 error=0 09:02:37 Received message from Master: op=Filter serial=216343 09:02:37 Color wheel filter change from 0 to 0 09:02:37 FLIGetFilterPos err=0 currentPosition=0 09:02:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:37 Filter is already there-color wheel unchanged 09:02:37 Received message from Master: op=Shutter serial=216344 09:02:37 Shutter LASER close 09:02:37 Received message from Camera: op=State serial=216346 09:02:37 GetSingleValue result=40 Value=cccccccc 09:02:37 SkyScan query 09:02:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:02:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:38 Parameters OK 09:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:38 Set A/D data flow result=40 09:02:38 Set A/D channel type result=40 09:02:38 Set A/D encoding result=40 09:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:38 Set channel filter=0.000000e+000 result=40 09:02:38 Config A/D Result=40 09:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:38 Get A/D filter: -9.255963e+061 result=40 09:02:38 Get A/D value=-858993460 result=40 09:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:38 Parameters OK 09:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:38 Set A/D data flow result=40 09:02:38 Set A/D channel type result=40 09:02:38 Set A/D encoding result=40 09:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:38 Set channel filter=0.000000e+000 result=40 09:02:38 Config A/D Result=40 09:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:38 Get A/D filter: -9.255963e+061 result=40 09:02:38 Get A/D value=-858993460 result=40 09:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:38 Aux= 09:02:38 Message to Camera, serial 216346 queued 09:03:14 Received message from Master: op=PointingHead serial=216358 09:03:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:03:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:03:14 Point started: ret=0 09:03:14 point_skyscan result=0 09:03:15 Check angles 09:03:15 SkyScan query 09:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.39<-23426 Statuses=0009 0009 09:03:15 Msec=0 True Az=112.995 Ze=-171.39 Az status=0009 Ze status=0009 09:03:16 Check angles 09:03:16 SkyScan query 09:03:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:03:16 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:03:16 Message to Master queued w/err=0: serial=216358 error=0 09:03:21 Received message from Master: op=Filter serial=216359 09:03:21 Color wheel filter change from 0 to 0 09:03:21 FLIGetFilterPos err=0 currentPosition=0 09:03:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:21 Filter is already there-color wheel unchanged 09:03:21 Received message from Master: op=Shutter serial=216360 09:03:21 Shutter LASER open 09:03:21 Received message from Camera: op=State serial=216362 09:03:21 GetSingleValue result=40 Value=cccccccc 09:03:21 SkyScan query 09:03:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:03:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:22 Parameters OK 09:03:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:22 Set A/D data flow result=40 09:03:22 Set A/D channel type result=40 09:03:22 Set A/D encoding result=40 09:03:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:22 Set channel filter=0.000000e+000 result=40 09:03:22 Config A/D Result=40 09:03:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:22 Get A/D filter: -9.255963e+061 result=40 09:03:22 Get A/D value=-858993460 result=40 09:03:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:22 Parameters OK 09:03:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:22 Set A/D data flow result=40 09:03:22 Set A/D channel type result=40 09:03:22 Set A/D encoding result=40 09:03:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:22 Set channel filter=0.000000e+000 result=40 09:03:22 Config A/D Result=40 09:03:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:22 Get A/D filter: -9.255963e+061 result=40 09:03:22 Get A/D value=-858993460 result=40 09:03:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:22 Aux= 09:03:22 Message to Camera, serial 216362 queued 09:03:30 Received message from Master: op=Shutter serial=216372 09:03:31 Shutter LASER close 09:03:31 Received message from Master: op=PointingHead serial=216376 09:03:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:03:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:03:31 Point started: ret=0 09:03:31 point_skyscan result=0 09:03:32 Check angles 09:03:32 SkyScan query 09:03:33 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.145<-21543 Statuses=0009 0009 09:03:33 Msec=0 True Az=135.945 Ze=-143.145 Az status=0009 Ze status=0009 09:03:33 Check angles 09:03:33 SkyScan query 09:03:34 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.74<-20116 Statuses=0009 0009 09:03:34 Msec=750 True Az=153.96 Ze=-121.74 Az status=0009 Ze status=0009 09:03:34 Check angles 09:03:34 SkyScan query 09:03:34 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.77<-18718 Statuses=0009 0009 09:03:34 Msec=1500 True Az=171.375 Ze=-100.77 Az status=0009 Ze status=0009 09:03:34 Check angles 09:03:34 SkyScan query 09:03:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.875<-17325 Statuses=0008 0009 09:03:35 Msec=2250 True Az=175.995 Ze=-79.875 Az status=0008 Ze status=0009 09:03:35 Check angles 09:03:35 SkyScan query 09:03:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.89<-15926 Statuses=0008 0009 09:03:36 Msec=3000 True Az=175.995 Ze=-58.89 Az status=0008 Ze status=0009 09:03:36 Check angles 09:03:36 SkyScan query 09:03:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:03:37 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:03:37 Message to Master queued w/err=0: serial=216376 error=0 09:03:42 Received message from Master: op=Filter serial=216377 09:03:42 Color wheel filter change from 0 to 0 09:03:42 FLIGetFilterPos err=0 currentPosition=0 09:03:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:42 Filter is already there-color wheel unchanged 09:03:42 Received message from Master: op=Shutter serial=216378 09:03:42 Shutter LASER close 09:03:42 Received message from Camera: op=State serial=216380 09:03:42 GetSingleValue result=40 Value=cccccccc 09:03:42 SkyScan query 09:03:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:03:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:42 Parameters OK 09:03:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:42 Set A/D data flow result=40 09:03:42 Set A/D channel type result=40 09:03:42 Set A/D encoding result=40 09:03:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:42 Set channel filter=0.000000e+000 result=40 09:03:42 Config A/D Result=40 09:03:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:42 Get A/D filter: -9.255963e+061 result=40 09:03:42 Get A/D value=-858993460 result=40 09:03:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:42 Parameters OK 09:03:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:42 Set A/D data flow result=40 09:03:42 Set A/D channel type result=40 09:03:42 Set A/D encoding result=40 09:03:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:42 Set channel filter=0.000000e+000 result=40 09:03:42 Config A/D Result=40 09:03:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:42 Get A/D filter: -9.255963e+061 result=40 09:03:42 Get A/D value=-858993460 result=40 09:03:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:42 Aux= 09:03:42 Message to Camera, serial 216380 queued 09:04:19 Received message from Master: op=PointingHead serial=216393 09:04:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:04:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:04:20 Point started: ret=0 09:04:20 point_skyscan result=0 09:04:20 Check angles 09:04:20 SkyScan query 09:04:21 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.435<-13429 Statuses=0009 0009 09:04:21 Msec=0 True Az=152.715 Ze=-21.435 Az status=0009 Ze status=0009 09:04:21 Check angles 09:04:21 SkyScan query 09:04:22 SkyScan query done: ret=0 az=134.79<-8986 ze=-0.03<-12002 Statuses=0009 0009 09:04:22 Msec=750 True Az=134.79 Ze=-0.03 Az status=0009 Ze status=0009 09:04:22 Check angles 09:04:22 SkyScan query 09:04:22 SkyScan query done: ret=0 az=117.39<-7826 ze=20.97<-10602 Statuses=0009 0009 09:04:22 Msec=1500 True Az=117.39 Ze=20.97 Az status=0009 Ze status=0009 09:04:23 Check angles 09:04:23 SkyScan query 09:04:23 SkyScan query done: ret=0 az=99.975<-6665 ze=41.88<-9208 Statuses=0009 0009 09:04:23 Msec=2250 True Az=99.975 Ze=41.88 Az status=0009 Ze status=0009 09:04:23 Check angles 09:04:23 SkyScan query 09:04:24 SkyScan query done: ret=0 az=86.025<-5735 ze=51.57<-8562 Statuses=0009 0008 09:04:24 Msec=3000 True Az=86.025 Ze=51.57 Az status=0009 Ze status=0008 09:04:24 Check angles 09:04:24 SkyScan query 09:04:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:04:25 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 09:04:25 Message to Master queued w/err=0: serial=216393 error=0 09:04:30 Received message from Master: op=Filter serial=216394 09:04:30 Color wheel filter change from 0 to 0 09:04:30 FLIGetFilterPos err=0 currentPosition=0 09:04:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:30 Filter is already there-color wheel unchanged 09:04:30 Received message from Master: op=Shutter serial=216395 09:04:30 Shutter LASER close 09:04:30 Received message from Camera: op=State serial=216397 09:04:30 GetSingleValue result=40 Value=cccccccc 09:04:30 SkyScan query 09:04:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:04:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:31 Parameters OK 09:04:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:31 Set A/D data flow result=40 09:04:31 Set A/D channel type result=40 09:04:31 Set A/D encoding result=40 09:04:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:31 Set channel filter=0.000000e+000 result=40 09:04:31 Config A/D Result=40 09:04:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:31 Get A/D filter: -9.255963e+061 result=40 09:04:31 Get A/D value=-858993460 result=40 09:04:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:31 Parameters OK 09:04:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:31 Set A/D data flow result=40 09:04:31 Set A/D channel type result=40 09:04:31 Set A/D encoding result=40 09:04:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:31 Set channel filter=0.000000e+000 result=40 09:04:31 Config A/D Result=40 09:04:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:31 Get A/D filter: -9.255963e+061 result=40 09:04:31 Get A/D value=-858993460 result=40 09:04:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:31 Aux= 09:04:31 Message to Camera, serial 216397 queued 09:05:07 Received message from Master: op=PointingHead serial=216410 09:05:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:05:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:05:08 Point started: ret=0 09:05:08 point_skyscan result=0 09:05:08 Check angles 09:05:08 SkyScan query 09:05:09 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 09:05:09 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 09:05:09 Check angles 09:05:09 SkyScan query 09:05:10 SkyScan query done: ret=0 az=126.435<-8429 ze=38.49<-9434 Statuses=0009 0008 09:05:10 Msec=750 True Az=126.435 Ze=38.49 Az status=0009 Ze status=0008 09:05:10 Check angles 09:05:10 SkyScan query 09:05:11 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 09:05:11 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 09:05:11 Check angles 09:05:11 SkyScan query 09:05:11 SkyScan query done: ret=0 az=161.13<-10742 ze=38.505<-9433 Statuses=0009 0008 09:05:11 Msec=2250 True Az=161.13 Ze=38.505 Az status=0009 Ze status=0008 09:05:11 Check angles 09:05:11 SkyScan query 09:05:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:05:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:05:12 Check angles 09:05:12 SkyScan query 09:05:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:05:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:05:13 Message to Master queued w/err=0: serial=216410 error=0 09:05:18 Received message from Master: op=Filter serial=216411 09:05:18 Color wheel filter change from 0 to 0 09:05:18 FLIGetFilterPos err=0 currentPosition=0 09:05:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:18 Filter is already there-color wheel unchanged 09:05:18 Received message from Master: op=Shutter serial=216412 09:05:18 Shutter LASER close 09:05:18 Received message from Camera: op=State serial=216414 09:05:18 GetSingleValue result=40 Value=cccccccc 09:05:18 SkyScan query 09:05:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:05:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:19 Parameters OK 09:05:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:19 Set A/D data flow result=40 09:05:19 Set A/D channel type result=40 09:05:19 Set A/D encoding result=40 09:05:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:19 Set channel filter=0.000000e+000 result=40 09:05:19 Config A/D Result=40 09:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:19 Get A/D filter: -9.255963e+061 result=40 09:05:19 Get A/D value=-858993460 result=40 09:05:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:19 Parameters OK 09:05:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:19 Set A/D data flow result=40 09:05:19 Set A/D channel type result=40 09:05:19 Set A/D encoding result=40 09:05:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:19 Set channel filter=0.000000e+000 result=40 09:05:19 Config A/D Result=40 09:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:19 Get A/D filter: -9.255963e+061 result=40 09:05:19 Get A/D value=-858993460 result=40 09:05:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:19 Aux= 09:05:19 Message to Camera, serial 216414 queued 09:05:55 Received message from Master: op=PointingHead serial=216427 09:05:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:05:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:05:56 Point started: ret=0 09:05:56 point_skyscan result=0 09:05:56 Check angles 09:05:56 SkyScan query [UTC 2018-12-17 09:05:57] 09:05:57 SkyScan query done: ret=0 az=152.91<-10194 ze=8.58<-11428 Statuses=0009 0009 09:05:57 Msec=0 True Az=152.91 Ze=8.58 Az status=0009 Ze status=0009 09:05:57 Check angles 09:05:57 SkyScan query 09:05:58 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.315<-12821 Statuses=0009 0009 09:05:58 Msec=750 True Az=135.42 Ze=-12.315 Az status=0009 Ze status=0009 09:05:58 Check angles 09:05:58 SkyScan query 09:05:59 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.3<-14220 Statuses=0009 0009 09:05:59 Msec=1500 True Az=117.81 Ze=-33.3 Az status=0009 Ze status=0009 09:05:59 Check angles 09:05:59 SkyScan query 09:05:59 SkyScan query done: ret=0 az=100.59<-6706 ze=-51.54<-15436 Statuses=0009 0009 09:05:59 Msec=2250 True Az=100.59 Ze=-51.54 Az status=0009 Ze status=0009 09:05:59 Check angles 09:05:59 SkyScan query 09:06:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 09:06:00 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 09:06:00 Check angles 09:06:00 SkyScan query 09:06:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:06:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:06:01 Message to Master queued w/err=0: serial=216427 error=0 09:06:06 Received message from Master: op=Filter serial=216428 09:06:06 Color wheel filter change from 0 to 0 09:06:06 FLIGetFilterPos err=0 currentPosition=0 09:06:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:06 Filter is already there-color wheel unchanged 09:06:06 Received message from Master: op=Shutter serial=216429 09:06:06 Shutter LASER close 09:06:06 Received message from Camera: op=State serial=216431 09:06:06 GetSingleValue result=40 Value=cccccccc 09:06:06 SkyScan query 09:06:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:06:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:07 Parameters OK 09:06:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:07 Set A/D data flow result=40 09:06:07 Set A/D channel type result=40 09:06:07 Set A/D encoding result=40 09:06:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:07 Set channel filter=0.000000e+000 result=40 09:06:07 Config A/D Result=40 09:06:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:07 Get A/D filter: -9.255963e+061 result=40 09:06:07 Get A/D value=-858993460 result=40 09:06:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:07 Parameters OK 09:06:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:07 Set A/D data flow result=40 09:06:07 Set A/D channel type result=40 09:06:07 Set A/D encoding result=40 09:06:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:07 Set channel filter=0.000000e+000 result=40 09:06:07 Config A/D Result=40 09:06:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:07 Get A/D filter: -9.255963e+061 result=40 09:06:07 Get A/D value=-858993460 result=40 09:06:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:07 Aux= 09:06:07 Message to Camera, serial 216431 queued 09:06:43 Received message from Master: op=PointingHead serial=216444 09:06:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:06:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:06:44 Point started: ret=0 09:06:44 point_skyscan result=0 09:06:45 Check angles 09:06:45 SkyScan query 09:06:45 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.51<-17434 Statuses=0009 0009 09:06:45 Msec=0 True Az=109.125 Ze=-81.51 Az status=0009 Ze status=0009 09:06:45 Check angles 09:06:45 SkyScan query 09:06:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 09:06:46 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 09:06:46 Check angles 09:06:46 SkyScan query 09:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.795<-20253 Statuses=0008 0009 09:06:47 Msec=1500 True Az=112.995 Ze=-123.795 Az status=0008 Ze status=0009 09:06:47 Check angles 09:06:47 SkyScan query 09:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 09:06:47 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 09:06:48 Check angles 09:06:48 SkyScan query 09:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 09:06:48 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 09:06:48 Check angles 09:06:48 SkyScan query 09:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:06:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:06:49 Message to Master queued w/err=0: serial=216444 error=0 09:06:54 Received message from Master: op=Filter serial=216445 09:06:54 Color wheel filter change from 0 to 0 09:06:54 FLIGetFilterPos err=0 currentPosition=0 09:06:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:54 Filter is already there-color wheel unchanged 09:06:54 Received message from Master: op=Shutter serial=216446 09:06:54 Shutter LASER open 09:06:54 Received message from Camera: op=State serial=216448 09:06:54 GetSingleValue result=40 Value=cccccccc 09:06:54 SkyScan query 09:06:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:06:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:55 Parameters OK 09:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:55 Set A/D data flow result=40 09:06:55 Set A/D channel type result=40 09:06:55 Set A/D encoding result=40 09:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:55 Set channel filter=0.000000e+000 result=40 09:06:55 Config A/D Result=40 09:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:55 Get A/D filter: -9.255963e+061 result=40 09:06:55 Get A/D value=-858993460 result=40 09:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:55 Parameters OK 09:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:55 Set A/D data flow result=40 09:06:55 Set A/D channel type result=40 09:06:55 Set A/D encoding result=40 09:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:55 Set channel filter=0.000000e+000 result=40 09:06:55 Config A/D Result=40 09:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:55 Get A/D filter: -9.255963e+061 result=40 09:06:55 Get A/D value=-858993460 result=40 09:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:55 Aux= 09:06:55 Message to Camera, serial 216448 queued 09:07:03 Received message from Master: op=Shutter serial=216458 09:07:03 Shutter LASER close 09:07:04 Received message from Master: op=PointingHead serial=216462 09:07:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:07:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:07:04 Point started: ret=0 09:07:04 point_skyscan result=0 09:07:05 Check angles 09:07:05 SkyScan query 09:07:05 SkyScan query done: ret=0 az=89.88<-5992 ze=157.185<-1521 Statuses=0009 0009 09:07:05 Msec=0 True Az=89.88 Ze=157.185 Az status=0009 Ze status=0009 09:07:06 Check angles 09:07:06 SkyScan query 09:07:06 SkyScan query done: ret=0 az=72.015<-4801 ze=135.795<-2947 Statuses=0009 0009 09:07:06 Msec=750 True Az=72.015 Ze=135.795 Az status=0009 Ze status=0009 09:07:06 Check angles 09:07:06 SkyScan query 09:07:07 SkyScan query done: ret=0 az=54.72<-3648 ze=114.81<-4346 Statuses=0009 0009 09:07:07 Msec=1500 True Az=54.72 Ze=114.81 Az status=0009 Ze status=0009 09:07:07 Check angles 09:07:07 SkyScan query 09:07:08 SkyScan query done: ret=0 az=40.935<-2729 ze=93.9<-5740 Statuses=0009 0009 09:07:08 Msec=2250 True Az=40.935 Ze=93.9 Az status=0009 Ze status=0009 09:07:08 Check angles 09:07:08 SkyScan query 09:07:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.465<-7169 Statuses=0008 0009 09:07:08 Msec=3000 True Az=40.995 Ze=72.465 Az status=0008 Ze status=0009 09:07:09 Check angles 09:07:09 SkyScan query 09:07:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 09:07:09 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 09:07:09 Check angles 09:07:09 SkyScan query 09:07:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:07:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:07:10 Message to Master queued w/err=0: serial=216462 error=0 09:07:15 Received message from Master: op=Filter serial=216463 09:07:15 Color wheel filter change from 0 to 0 09:07:15 FLIGetFilterPos err=0 currentPosition=0 09:07:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:15 Filter is already there-color wheel unchanged 09:07:15 Received message from Master: op=Shutter serial=216464 09:07:15 Shutter LASER close 09:07:15 Received message from Camera: op=State serial=216466 09:07:15 GetSingleValue result=40 Value=cccccccc 09:07:15 SkyScan query 09:07:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:07:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:16 Parameters OK 09:07:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:16 Set A/D data flow result=40 09:07:16 Set A/D channel type result=40 09:07:16 Set A/D encoding result=40 09:07:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:16 Set channel filter=0.000000e+000 result=40 09:07:16 Config A/D Result=40 09:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:16 Get A/D filter: -9.255963e+061 result=40 09:07:16 Get A/D value=-858993460 result=40 09:07:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:16 Parameters OK 09:07:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:16 Set A/D data flow result=40 09:07:16 Set A/D channel type result=40 09:07:16 Set A/D encoding result=40 09:07:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:16 Set channel filter=0.000000e+000 result=40 09:07:16 Config A/D Result=40 09:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:16 Get A/D filter: -9.255963e+061 result=40 09:07:16 Get A/D value=-858993460 result=40 09:07:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:16 Aux= 09:07:16 Message to Camera, serial 216466 queued 09:07:53 Received message from Master: op=PointingHead serial=216479 09:07:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:07:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:07:53 Point started: ret=0 09:07:53 point_skyscan result=0 09:07:54 Check angles 09:07:54 SkyScan query 09:07:54 SkyScan query done: ret=0 az=64.23<-4282 ze=66.525<-7565 Statuses=0009 0008 09:07:54 Msec=0 True Az=64.23 Ze=66.525 Az status=0009 Ze status=0008 09:07:55 Check angles 09:07:55 SkyScan query 09:07:55 SkyScan query done: ret=0 az=81.69<-5446 ze=66.51<-7566 Statuses=0009 0008 09:07:55 Msec=750 True Az=81.69 Ze=66.51 Az status=0009 Ze status=0008 09:07:55 Check angles 09:07:55 SkyScan query 09:07:56 SkyScan query done: ret=0 az=99.21<-6614 ze=66.51<-7566 Statuses=0009 0008 09:07:56 Msec=1500 True Az=99.21 Ze=66.51 Az status=0009 Ze status=0008 09:07:56 Check angles 09:07:56 SkyScan query 09:07:57 SkyScan query done: ret=0 az=116.805<-7787 ze=66.51<-7566 Statuses=0009 0008 09:07:57 Msec=2250 True Az=116.805 Ze=66.51 Az status=0009 Ze status=0008 09:07:57 Check angles 09:07:57 SkyScan query 09:07:57 SkyScan query done: ret=0 az=134.115<-8941 ze=66.51<-7566 Statuses=0009 0008 09:07:57 Msec=3000 True Az=134.115 Ze=66.51 Az status=0009 Ze status=0008 09:07:58 Check angles 09:07:58 SkyScan query 09:07:58 SkyScan query done: ret=0 az=151.83<-10122 ze=66.51<-7566 Statuses=0009 0008 09:07:58 Msec=3750 True Az=151.83 Ze=66.51 Az status=0009 Ze status=0008 09:07:58 Check angles 09:07:58 SkyScan query 09:07:59 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 09:07:59 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 09:07:59 Message to Master queued w/err=0: serial=216479 error=0 09:08:04 Received message from Master: op=Filter serial=216480 09:08:04 Color wheel filter change from 0 to 0 09:08:04 FLIGetFilterPos err=0 currentPosition=0 09:08:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:04 Filter is already there-color wheel unchanged 09:08:04 Received message from Master: op=Shutter serial=216481 09:08:04 Shutter LASER close 09:08:04 Received message from Camera: op=State serial=216483 09:08:04 GetSingleValue result=40 Value=cccccccc 09:08:04 SkyScan query 09:08:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 09:08:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:05 Parameters OK 09:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:05 Set A/D data flow result=40 09:08:05 Set A/D channel type result=40 09:08:05 Set A/D encoding result=40 09:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:05 Set channel filter=0.000000e+000 result=40 09:08:05 Config A/D Result=40 09:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:05 Get A/D filter: -9.255963e+061 result=40 09:08:05 Get A/D value=-858993460 result=40 09:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:05 Parameters OK 09:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:05 Set A/D data flow result=40 09:08:05 Set A/D channel type result=40 09:08:05 Set A/D encoding result=40 09:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:05 Set channel filter=0.000000e+000 result=40 09:08:05 Config A/D Result=40 09:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:05 Get A/D filter: -9.255963e+061 result=40 09:08:05 Get A/D value=-858993460 result=40 09:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:05 Aux= 09:08:05 Message to Camera, serial 216483 queued 09:08:42 Received message from Master: op=PointingHead serial=216496 09:08:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:08:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:08:42 Point started: ret=0 09:08:42 point_skyscan result=0 09:08:43 Check angles 09:08:43 SkyScan query 09:08:43 SkyScan query done: ret=0 az=134.865<-8991 ze=96.39<-5574 Statuses=0009 0009 09:08:43 Msec=0 True Az=134.865 Ze=96.39 Az status=0009 Ze status=0009 09:08:44 Check angles 09:08:44 SkyScan query 09:08:44 SkyScan query done: ret=0 az=130.995<-8733 ze=117.765<-4149 Statuses=0008 0009 09:08:44 Msec=750 True Az=130.995 Ze=117.765 Az status=0008 Ze status=0009 09:08:44 Check angles 09:08:44 SkyScan query 09:08:45 SkyScan query done: ret=0 az=130.995<-8733 ze=138.72<-2752 Statuses=0008 0009 09:08:45 Msec=1500 True Az=130.995 Ze=138.72 Az status=0008 Ze status=0009 09:08:45 Check angles 09:08:45 SkyScan query 09:08:46 SkyScan query done: ret=0 az=130.995<-8733 ze=159.69<-1354 Statuses=0008 0009 09:08:46 Msec=2250 True Az=130.995 Ze=159.69 Az status=0008 Ze status=0009 09:08:46 Check angles 09:08:46 SkyScan query 09:08:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-178.92<-23928 Statuses=0008 0009 09:08:46 Msec=3000 True Az=130.995 Ze=-178.92 Az status=0008 Ze status=0009 09:08:47 Check angles 09:08:47 SkyScan query 09:08:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-157.545<-22503 Statuses=0008 0009 09:08:47 Msec=3750 True Az=130.995 Ze=-157.545 Az status=0008 Ze status=0009 09:08:47 Check angles 09:08:47 SkyScan query 09:08:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 09:08:48 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 09:08:48 Check angles 09:08:48 SkyScan query 09:08:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:08:49 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:08:49 Message to Master queued w/err=0: serial=216496 error=0 09:08:54 Received message from Master: op=Filter serial=216497 09:08:54 Color wheel filter change from 0 to 0 09:08:54 FLIGetFilterPos err=0 currentPosition=0 09:08:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:54 Filter is already there-color wheel unchanged 09:08:54 Received message from Master: op=Shutter serial=216498 09:08:54 Shutter LASER close 09:08:54 Received message from Camera: op=State serial=216500 09:08:54 GetSingleValue result=40 Value=cccccccc 09:08:54 SkyScan query 09:08:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:08:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:55 Parameters OK 09:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:55 Set A/D data flow result=40 09:08:55 Set A/D channel type result=40 09:08:55 Set A/D encoding result=40 09:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:55 Set channel filter=0.000000e+000 result=40 09:08:55 Config A/D Result=40 09:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:55 Get A/D filter: -9.255963e+061 result=40 09:08:55 Get A/D value=-858993460 result=40 09:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:55 Parameters OK 09:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:55 Set A/D data flow result=40 09:08:55 Set A/D channel type result=40 09:08:55 Set A/D encoding result=40 09:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:55 Set channel filter=0.000000e+000 result=40 09:08:55 Config A/D Result=40 09:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:55 Get A/D filter: -9.255963e+061 result=40 09:08:55 Get A/D value=-858993460 result=40 09:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:55 Aux= 09:08:55 Message to Camera, serial 216500 queued 09:09:31 Received message from Master: op=PointingHead serial=216513 09:09:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:09:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:09:32 Point started: ret=0 09:09:32 point_skyscan result=0 09:09:32 Check angles 09:09:32 SkyScan query 09:09:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 09:09:33 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 09:09:33 Check angles 09:09:33 SkyScan query 09:09:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:09:34 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:09:34 Message to Master queued w/err=0: serial=216513 error=0 09:09:39 Received message from Master: op=Filter serial=216514 09:09:39 Color wheel filter change from 0 to 0 09:09:39 FLIGetFilterPos err=0 currentPosition=0 09:09:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:39 Filter is already there-color wheel unchanged 09:09:39 Received message from Master: op=Shutter serial=216515 09:09:39 Shutter LASER open 09:09:39 Received message from Camera: op=State serial=216517 09:09:39 GetSingleValue result=40 Value=cccccccc 09:09:39 SkyScan query 09:09:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:09:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:40 Parameters OK 09:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:40 Set A/D data flow result=40 09:09:40 Set A/D channel type result=40 09:09:40 Set A/D encoding result=40 09:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:40 Set channel filter=0.000000e+000 result=40 09:09:40 Config A/D Result=40 09:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:40 Get A/D filter: -9.255963e+061 result=40 09:09:40 Get A/D value=-858993460 result=40 09:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:40 Parameters OK 09:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:40 Set A/D data flow result=40 09:09:40 Set A/D channel type result=40 09:09:40 Set A/D encoding result=40 09:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:40 Set channel filter=0.000000e+000 result=40 09:09:40 Config A/D Result=40 09:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:40 Get A/D filter: -9.255963e+061 result=40 09:09:40 Get A/D value=-858993460 result=40 09:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:40 Aux= 09:09:40 Message to Camera, serial 216517 queued 09:09:48 Received message from Master: op=Shutter serial=216527 09:09:48 Shutter LASER close 09:09:49 Received message from Master: op=PointingHead serial=216531 09:09:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:09:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:09:49 Point started: ret=0 09:09:49 point_skyscan result=0 09:09:50 Check angles 09:09:50 SkyScan query 09:09:50 SkyScan query done: ret=0 az=136.005<-9067 ze=-143.175<-21545 Statuses=0009 0009 09:09:50 Msec=0 True Az=136.005 Ze=-143.175 Az status=0009 Ze status=0009 09:09:51 Check angles 09:09:51 SkyScan query 09:09:51 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.175<-20145 Statuses=0009 0009 09:09:51 Msec=750 True Az=153.48 Ze=-122.175 Az status=0009 Ze status=0009 09:09:51 Check angles 09:09:51 SkyScan query 09:09:52 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.8<-18720 Statuses=0009 0009 09:09:52 Msec=1500 True Az=171.405 Ze=-100.8 Az status=0009 Ze status=0009 09:09:52 Check angles 09:09:52 SkyScan query 09:09:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.875<-17325 Statuses=0008 0009 09:09:53 Msec=2250 True Az=175.995 Ze=-79.875 Az status=0008 Ze status=0009 09:09:53 Check angles 09:09:53 SkyScan query 09:09:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.92<-15928 Statuses=0008 0009 09:09:53 Msec=3000 True Az=175.995 Ze=-58.92 Az status=0008 Ze status=0009 09:09:54 Check angles 09:09:54 SkyScan query 09:09:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:09:54 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:09:54 Message to Master queued w/err=0: serial=216531 error=0 09:09:59 Received message from Master: op=Filter serial=216532 09:09:59 Color wheel filter change from 0 to 0 09:09:59 FLIGetFilterPos err=0 currentPosition=0 09:09:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:59 Filter is already there-color wheel unchanged 09:09:59 Received message from Master: op=Shutter serial=216533 09:09:59 Shutter LASER close 09:10:00 Received message from Camera: op=State serial=216535 09:10:00 GetSingleValue result=40 Value=cccccccc 09:10:00 SkyScan query 09:10:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:10:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:00 Parameters OK 09:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:00 Set A/D data flow result=40 09:10:00 Set A/D channel type result=40 09:10:00 Set A/D encoding result=40 09:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:00 Set channel filter=0.000000e+000 result=40 09:10:00 Config A/D Result=40 09:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:00 Get A/D filter: -9.255963e+061 result=40 09:10:00 Get A/D value=-858993460 result=40 09:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:00 Parameters OK 09:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:00 Set A/D data flow result=40 09:10:00 Set A/D channel type result=40 09:10:00 Set A/D encoding result=40 09:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:00 Set channel filter=0.000000e+000 result=40 09:10:00 Config A/D Result=40 09:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:00 Get A/D filter: -9.255963e+061 result=40 09:10:00 Get A/D value=-858993460 result=40 09:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:00 Aux= 09:10:00 Message to Camera, serial 216535 queued 09:10:37 Received message from Master: op=PointingHead serial=216548 09:10:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:10:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:10:37 Point started: ret=0 09:10:37 point_skyscan result=0 09:10:38 Check angles 09:10:38 SkyScan query 09:10:39 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.735<-13449 Statuses=0009 0009 09:10:39 Msec=0 True Az=152.955 Ze=-21.735 Az status=0009 Ze status=0009 09:10:39 Check angles 09:10:39 SkyScan query 09:10:39 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.69<-12046 Statuses=0009 0009 09:10:39 Msec=750 True Az=135.435 Ze=-0.69 Az status=0009 Ze status=0009 09:10:40 Check angles 09:10:40 SkyScan query 09:10:40 SkyScan query done: ret=0 az=117.99<-7866 ze=20.16<-10656 Statuses=0009 0009 09:10:40 Msec=1500 True Az=117.99 Ze=20.16 Az status=0009 Ze status=0009 09:10:40 Check angles 09:10:40 SkyScan query 09:10:41 SkyScan query done: ret=0 az=100.485<-6699 ze=41.22<-9252 Statuses=0009 0009 09:10:41 Msec=2250 True Az=100.485 Ze=41.22 Az status=0009 Ze status=0009 09:10:41 Check angles 09:10:41 SkyScan query 09:10:42 SkyScan query done: ret=0 az=85.98<-5732 ze=51.6<-8560 Statuses=0009 0008 09:10:42 Msec=3000 True Az=85.98 Ze=51.6 Az status=0009 Ze status=0008 09:10:42 Check angles 09:10:42 SkyScan query 09:10:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:10:42 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 09:10:42 Message to Master queued w/err=0: serial=216548 error=0 09:10:47 Received message from Master: op=Filter serial=216549 09:10:47 Color wheel filter change from 0 to 0 09:10:47 FLIGetFilterPos err=0 currentPosition=0 09:10:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:47 Filter is already there-color wheel unchanged 09:10:48 Received message from Master: op=Shutter serial=216550 09:10:48 Shutter LASER close 09:10:48 Received message from Camera: op=State serial=216552 09:10:48 GetSingleValue result=40 Value=cccccccc 09:10:48 SkyScan query 09:10:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:10:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:48 Parameters OK 09:10:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:48 Set A/D data flow result=40 09:10:48 Set A/D channel type result=40 09:10:48 Set A/D encoding result=40 09:10:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:48 Set channel filter=0.000000e+000 result=40 09:10:48 Config A/D Result=40 09:10:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:48 Get A/D filter: -9.255963e+061 result=40 09:10:48 Get A/D value=-858993460 result=40 09:10:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:48 Parameters OK 09:10:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:48 Set A/D data flow result=40 09:10:48 Set A/D channel type result=40 09:10:48 Set A/D encoding result=40 09:10:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:48 Set channel filter=0.000000e+000 result=40 09:10:48 Config A/D Result=40 09:10:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:48 Get A/D filter: -9.255963e+061 result=40 09:10:48 Get A/D value=-858993460 result=40 09:10:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:48 Aux= 09:10:48 Message to Camera, serial 216552 queued 09:11:25 Received message from Master: op=PointingHead serial=216565 09:11:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:11:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:11:25 Point started: ret=0 09:11:25 point_skyscan result=0 09:11:26 Check angles 09:11:26 SkyScan query 09:11:27 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 09:11:27 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 09:11:27 Check angles 09:11:27 SkyScan query 09:11:27 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 09:11:27 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 09:11:28 Check angles 09:11:28 SkyScan query 09:11:28 SkyScan query done: ret=0 az=144.78<-9652 ze=38.505<-9433 Statuses=0009 0008 09:11:28 Msec=1500 True Az=144.78 Ze=38.505 Az status=0009 Ze status=0008 09:11:28 Check angles 09:11:28 SkyScan query 09:11:29 SkyScan query done: ret=0 az=162.195<-10813 ze=38.505<-9433 Statuses=0009 0008 09:11:29 Msec=2250 True Az=162.195 Ze=38.505 Az status=0009 Ze status=0008 09:11:29 Check angles 09:11:29 SkyScan query 09:11:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:11:30 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:11:30 Check angles 09:11:30 SkyScan query 09:11:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:11:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:11:30 Message to Master queued w/err=0: serial=216565 error=0 09:11:35 Received message from Master: op=Filter serial=216566 09:11:35 Color wheel filter change from 0 to 0 09:11:35 FLIGetFilterPos err=0 currentPosition=0 09:11:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:35 Filter is already there-color wheel unchanged 09:11:36 Received message from Master: op=Shutter serial=216567 09:11:36 Shutter LASER close 09:11:36 Received message from Camera: op=State serial=216569 09:11:36 GetSingleValue result=40 Value=cccccccc 09:11:36 SkyScan query 09:11:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:11:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:36 Parameters OK 09:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:36 Set A/D data flow result=40 09:11:36 Set A/D channel type result=40 09:11:36 Set A/D encoding result=40 09:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:36 Set channel filter=0.000000e+000 result=40 09:11:36 Config A/D Result=40 09:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:36 Get A/D filter: -9.255963e+061 result=40 09:11:36 Get A/D value=-858993460 result=40 09:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:36 Parameters OK 09:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:36 Set A/D data flow result=40 09:11:36 Set A/D channel type result=40 09:11:36 Set A/D encoding result=40 09:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:36 Set channel filter=0.000000e+000 result=40 09:11:36 Config A/D Result=40 09:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:36 Get A/D filter: -9.255963e+061 result=40 09:11:36 Get A/D value=-858993460 result=40 09:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:36 Aux= 09:11:36 Message to Camera, serial 216569 queued 09:12:12 Received message from Master: op=PointingHead serial=216581 09:12:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:12:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:12:13 Point started: ret=0 09:12:13 point_skyscan result=0 09:12:13 Check angles 09:12:13 SkyScan query 09:12:14 SkyScan query done: ret=0 az=153.15<-10210 ze=8.85<-11410 Statuses=0009 0009 09:12:14 Msec=0 True Az=153.15 Ze=8.85 Az status=0009 Ze status=0009 09:12:14 Check angles 09:12:14 SkyScan query 09:12:15 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.12<-12808 Statuses=0009 0009 09:12:15 Msec=750 True Az=135.735 Ze=-12.12 Az status=0009 Ze status=0009 09:12:15 Check angles 09:12:15 SkyScan query 09:12:15 SkyScan query done: ret=0 az=118.05<-7870 ze=-33.06<-14204 Statuses=0009 0009 09:12:15 Msec=1500 True Az=118.05 Ze=-33.06 Az status=0009 Ze status=0009 09:12:16 Check angles 09:12:16 SkyScan query 09:12:16 SkyScan query done: ret=0 az=100.8<-6720 ze=-51.525<-15435 Statuses=0009 0009 09:12:16 Msec=2250 True Az=100.8 Ze=-51.525 Az status=0009 Ze status=0009 09:12:16 Check angles 09:12:16 SkyScan query 09:12:17 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 09:12:17 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 09:12:17 Check angles 09:12:17 SkyScan query 09:12:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:12:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:12:18 Message to Master queued w/err=0: serial=216581 error=0 09:12:23 Received message from Master: op=Filter serial=216582 09:12:23 Color wheel filter change from 0 to 0 09:12:23 FLIGetFilterPos err=0 currentPosition=0 09:12:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:23 Filter is already there-color wheel unchanged 09:12:23 Received message from Master: op=Shutter serial=216583 09:12:23 Shutter LASER close 09:12:23 Received message from Camera: op=State serial=216585 09:12:23 GetSingleValue result=40 Value=cccccccc 09:12:23 SkyScan query 09:12:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:12:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:23 Parameters OK 09:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:23 Set A/D data flow result=40 09:12:23 Set A/D channel type result=40 09:12:23 Set A/D encoding result=40 09:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:23 Set channel filter=0.000000e+000 result=40 09:12:23 Config A/D Result=40 09:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:23 Get A/D filter: -9.255963e+061 result=40 09:12:23 Get A/D value=-858993460 result=40 09:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:23 Parameters OK 09:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:23 Set A/D data flow result=40 09:12:23 Set A/D channel type result=40 09:12:23 Set A/D encoding result=40 09:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:23 Set channel filter=0.000000e+000 result=40 09:12:23 Config A/D Result=40 09:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:23 Get A/D filter: -9.255963e+061 result=40 09:12:23 Get A/D value=-858993460 result=40 09:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:23 Aux= 09:12:23 Message to Camera, serial 216585 queued 09:13:00 Received message from Master: op=PointingHead serial=216598 09:13:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:13:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:13:01 Point started: ret=0 09:13:01 point_skyscan result=0 09:13:01 Check angles 09:13:01 SkyScan query 09:13:02 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.09<-17406 Statuses=0009 0009 09:13:02 Msec=0 True Az=108.93 Ze=-81.09 Az status=0009 Ze status=0009 09:13:02 Check angles 09:13:02 SkyScan query 09:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 09:13:03 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 09:13:03 Check angles 09:13:03 SkyScan query 09:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 09:13:03 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 09:13:04 Check angles 09:13:04 SkyScan query 09:13:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 09:13:04 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 09:13:04 Check angles 09:13:04 SkyScan query 09:13:05 SkyScan query done: ret=0 az=112.98<-7532 ze=-164.94<-22996 Statuses=0008 0009 09:13:05 Msec=3000 True Az=112.98 Ze=-164.94 Az status=0008 Ze status=0009 09:13:05 Check angles 09:13:05 SkyScan query 09:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:13:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:13:06 Message to Master queued w/err=0: serial=216598 error=0 09:13:11 Received message from Master: op=Filter serial=216599 09:13:11 Color wheel filter change from 0 to 0 09:13:11 FLIGetFilterPos err=0 currentPosition=0 09:13:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:11 Filter is already there-color wheel unchanged 09:13:11 Received message from Master: op=Shutter serial=216600 09:13:11 Shutter LASER open 09:13:11 Received message from Camera: op=State serial=216602 09:13:11 GetSingleValue result=40 Value=cccccccc 09:13:11 SkyScan query 09:13:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:13:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:12 Parameters OK 09:13:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:12 Set A/D data flow result=40 09:13:12 Set A/D channel type result=40 09:13:12 Set A/D encoding result=40 09:13:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:12 Set channel filter=0.000000e+000 result=40 09:13:12 Config A/D Result=40 09:13:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:12 Get A/D filter: -9.255963e+061 result=40 09:13:12 Get A/D value=-858993460 result=40 09:13:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:12 Parameters OK 09:13:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:12 Set A/D data flow result=40 09:13:12 Set A/D channel type result=40 09:13:12 Set A/D encoding result=40 09:13:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:12 Set channel filter=0.000000e+000 result=40 09:13:12 Config A/D Result=40 09:13:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:12 Get A/D filter: -9.255963e+061 result=40 09:13:12 Get A/D value=-858993460 result=40 09:13:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:12 Aux= 09:13:12 Message to Camera, serial 216602 queued 09:13:20 Received message from Master: op=Shutter serial=216612 09:13:20 Shutter LASER close 09:13:20 Received message from Master: op=PointingHead serial=216616 09:13:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:13:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:13:21 Point started: ret=0 09:13:21 point_skyscan result=0 09:13:22 Check angles 09:13:22 SkyScan query 09:13:22 SkyScan query done: ret=0 az=89.64<-5976 ze=157.02<-1532 Statuses=0009 0009 09:13:22 Msec=0 True Az=89.64 Ze=157.02 Az status=0009 Ze status=0009 09:13:22 Check angles 09:13:22 SkyScan query 09:13:23 SkyScan query done: ret=0 az=72.27<-4818 ze=136.095<-2927 Statuses=0009 0009 09:13:23 Msec=750 True Az=72.27 Ze=136.095 Az status=0009 Ze status=0009 09:13:23 Check angles 09:13:23 SkyScan query 09:13:24 SkyScan query done: ret=0 az=54.9<-3660 ze=115.155<-4323 Statuses=0009 0009 09:13:24 Msec=1500 True Az=54.9 Ze=115.155 Az status=0009 Ze status=0009 09:13:24 Check angles 09:13:24 SkyScan query 09:13:24 SkyScan query done: ret=0 az=40.965<-2731 ze=94.2<-5720 Statuses=0009 0009 09:13:24 Msec=2250 True Az=40.965 Ze=94.2 Az status=0009 Ze status=0009 09:13:25 Check angles 09:13:25 SkyScan query 09:13:25 SkyScan query done: ret=0 az=40.995<-2733 ze=73.215<-7119 Statuses=0008 0009 09:13:25 Msec=3000 True Az=40.995 Ze=73.215 Az status=0008 Ze status=0009 09:13:25 Check angles 09:13:25 SkyScan query 09:13:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 09:13:26 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 09:13:26 Check angles 09:13:26 SkyScan query 09:13:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:13:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:13:27 Message to Master queued w/err=0: serial=216616 error=0 09:13:32 Received message from Master: op=Filter serial=216617 09:13:32 Color wheel filter change from 0 to 0 09:13:32 FLIGetFilterPos err=0 currentPosition=0 09:13:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:32 Filter is already there-color wheel unchanged 09:13:32 Received message from Master: op=Shutter serial=216618 09:13:32 Shutter LASER close 09:13:32 Received message from Camera: op=State serial=216620 09:13:32 GetSingleValue result=40 Value=cccccccc 09:13:32 SkyScan query 09:13:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:13:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:33 Parameters OK 09:13:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:33 Set A/D data flow result=40 09:13:33 Set A/D channel type result=40 09:13:33 Set A/D encoding result=40 09:13:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:33 Set channel filter=0.000000e+000 result=40 09:13:33 Config A/D Result=40 09:13:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:33 Get A/D filter: -9.255963e+061 result=40 09:13:33 Get A/D value=-858993460 result=40 09:13:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:33 Parameters OK 09:13:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:33 Set A/D data flow result=40 09:13:33 Set A/D channel type result=40 09:13:33 Set A/D encoding result=40 09:13:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:33 Set channel filter=0.000000e+000 result=40 09:13:33 Config A/D Result=40 09:13:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:33 Get A/D filter: -9.255963e+061 result=40 09:13:33 Get A/D value=-858993460 result=40 09:13:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:33 Aux= 09:13:33 Message to Camera, serial 216620 queued 09:14:09 Received message from Master: op=PointingHead serial=216633 09:14:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:14:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:14:10 Point started: ret=0 09:14:10 point_skyscan result=0 09:14:10 Check angles 09:14:10 SkyScan query 09:14:11 SkyScan query done: ret=0 az=64.215<-4281 ze=66.51<-7566 Statuses=0009 0008 09:14:11 Msec=0 True Az=64.215 Ze=66.51 Az status=0009 Ze status=0008 09:14:11 Check angles 09:14:11 SkyScan query 09:14:12 SkyScan query done: ret=0 az=81.675<-5445 ze=66.51<-7566 Statuses=0009 0008 09:14:12 Msec=750 True Az=81.675 Ze=66.51 Az status=0009 Ze status=0008 09:14:12 Check angles 09:14:12 SkyScan query 09:14:13 SkyScan query done: ret=0 az=99.36<-6624 ze=66.495<-7567 Statuses=0009 0008 09:14:13 Msec=1500 True Az=99.36 Ze=66.495 Az status=0009 Ze status=0008 09:14:13 Check angles 09:14:13 SkyScan query 09:14:13 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 09:14:13 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 09:14:13 Check angles 09:14:13 SkyScan query 09:14:14 SkyScan query done: ret=0 az=134.175<-8945 ze=66.495<-7567 Statuses=0009 0008 09:14:14 Msec=3000 True Az=134.175 Ze=66.495 Az status=0009 Ze status=0008 09:14:14 Check angles 09:14:14 SkyScan query 09:14:15 SkyScan query done: ret=0 az=151.605<-10107 ze=66.495<-7567 Statuses=0009 0008 09:14:15 Msec=3750 True Az=151.605 Ze=66.495 Az status=0009 Ze status=0008 09:14:15 Check angles 09:14:15 SkyScan query 09:14:16 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:14:16 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:14:16 Message to Master queued w/err=0: serial=216633 error=0 09:14:21 Received message from Master: op=Filter serial=216634 09:14:21 Color wheel filter change from 0 to 0 09:14:21 FLIGetFilterPos err=0 currentPosition=0 09:14:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:21 Filter is already there-color wheel unchanged 09:14:21 Received message from Master: op=Shutter serial=216635 09:14:21 Shutter LASER close 09:14:21 Received message from Camera: op=State serial=216637 09:14:21 GetSingleValue result=40 Value=cccccccc 09:14:21 SkyScan query 09:14:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:14:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:21 Parameters OK 09:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:21 Set A/D data flow result=40 09:14:21 Set A/D channel type result=40 09:14:21 Set A/D encoding result=40 09:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:21 Set channel filter=0.000000e+000 result=40 09:14:21 Config A/D Result=40 09:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:21 Get A/D filter: -9.255963e+061 result=40 09:14:21 Get A/D value=-858993460 result=40 09:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:21 Parameters OK 09:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:21 Set A/D data flow result=40 09:14:21 Set A/D channel type result=40 09:14:21 Set A/D encoding result=40 09:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:21 Set channel filter=0.000000e+000 result=40 09:14:21 Config A/D Result=40 09:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:21 Get A/D filter: -9.255963e+061 result=40 09:14:21 Get A/D value=-858993460 result=40 09:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:21 Aux= 09:14:21 Message to Camera, serial 216637 queued 09:14:58 Received message from Master: op=PointingHead serial=216650 09:14:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:14:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:14:59 Point started: ret=0 09:14:59 point_skyscan result=0 09:14:59 Check angles 09:14:59 SkyScan query 09:15:00 SkyScan query done: ret=0 az=135.27<-9018 ze=96.03<-5598 Statuses=0009 0009 09:15:00 Msec=0 True Az=135.27 Ze=96.03 Az status=0009 Ze status=0009 09:15:00 Check angles 09:15:00 SkyScan query 09:15:01 SkyScan query done: ret=0 az=130.995<-8733 ze=117<-4200 Statuses=0008 0009 09:15:01 Msec=750 True Az=130.995 Ze=117 Az status=0008 Ze status=0009 09:15:01 Check angles 09:15:01 SkyScan query 09:15:01 SkyScan query done: ret=0 az=130.98<-8732 ze=138.315<-2779 Statuses=0008 0009 09:15:01 Msec=1500 True Az=130.98 Ze=138.315 Az status=0008 Ze status=0009 09:15:02 Check angles 09:15:02 SkyScan query 09:15:02 SkyScan query done: ret=0 az=130.995<-8733 ze=159.735<-1351 Statuses=0008 0009 09:15:02 Msec=2250 True Az=130.995 Ze=159.735 Az status=0008 Ze status=0009 09:15:02 Check angles 09:15:02 SkyScan query 09:15:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.295<-23953 Statuses=0008 0009 09:15:03 Msec=3000 True Az=130.995 Ze=-179.295 Az status=0008 Ze status=0009 09:15:03 Check angles 09:15:03 SkyScan query 09:15:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.355<-22557 Statuses=0008 0009 09:15:04 Msec=3750 True Az=130.995 Ze=-158.355 Az status=0008 Ze status=0009 09:15:04 Check angles 09:15:04 SkyScan query 09:15:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 09:15:04 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 09:15:05 Check angles 09:15:05 SkyScan query 09:15:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:15:05 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:15:05 Message to Master queued w/err=0: serial=216650 error=0 09:15:10 Received message from Master: op=Filter serial=216651 09:15:10 Color wheel filter change from 0 to 0 09:15:10 FLIGetFilterPos err=0 currentPosition=0 09:15:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:10 Filter is already there-color wheel unchanged 09:15:10 Received message from Master: op=Shutter serial=216652 09:15:10 Shutter LASER close 09:15:10 Received message from Camera: op=State serial=216654 09:15:10 GetSingleValue result=40 Value=cccccccc 09:15:10 SkyScan query 09:15:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:15:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:11 Parameters OK 09:15:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:11 Set A/D data flow result=40 09:15:11 Set A/D channel type result=40 09:15:11 Set A/D encoding result=40 09:15:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:11 Set channel filter=0.000000e+000 result=40 09:15:11 Config A/D Result=40 09:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:11 Get A/D filter: -9.255963e+061 result=40 09:15:11 Get A/D value=-858993460 result=40 09:15:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:11 Parameters OK 09:15:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:11 Set A/D data flow result=40 09:15:11 Set A/D channel type result=40 09:15:11 Set A/D encoding result=40 09:15:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-17 09:15:11] 09:15:11 Set channel filter=0.000000e+000 result=40 09:15:11 Config A/D Result=40 09:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:11 Get A/D filter: -9.255963e+061 result=40 09:15:11 Get A/D value=-858993460 result=40 09:15:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:11 Aux= 09:15:11 Message to Camera, serial 216654 queued 09:15:27 Received message from Master: op=Identify serial=216655 09:15:48 Received message from Master: op=PointingHead serial=216670 09:15:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:15:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:15:48 Point started: ret=0 09:15:48 point_skyscan result=0 09:15:49 Check angles 09:15:49 SkyScan query 09:15:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 09:15:50 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 09:15:50 Check angles 09:15:50 SkyScan query 09:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:15:50 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:15:50 Message to Master queued w/err=0: serial=216670 error=0 [UTC 2018-12-17 09:15:52] 09:15:55 Received message from Master: op=Filter serial=216671 09:15:55 Color wheel filter change from 0 to 0 09:15:55 FLIGetFilterPos err=0 currentPosition=0 09:15:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:55 Filter is already there-color wheel unchanged 09:15:55 Received message from Master: op=Shutter serial=216672 09:15:55 Shutter LASER open 09:15:56 Received message from Camera: op=State serial=216674 09:15:56 GetSingleValue result=40 Value=cccccccc 09:15:56 SkyScan query 09:15:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:15:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:56 Parameters OK 09:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:56 Set A/D data flow result=40 09:15:56 Set A/D channel type result=40 09:15:56 Set A/D encoding result=40 09:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:56 Set channel filter=0.000000e+000 result=40 09:15:56 Config A/D Result=40 09:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:56 Get A/D filter: -9.255963e+061 result=40 09:15:56 Get A/D value=-858993460 result=40 09:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:56 Parameters OK 09:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:56 Set A/D data flow result=40 09:15:56 Set A/D channel type result=40 09:15:56 Set A/D encoding result=40 09:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:56 Set channel filter=0.000000e+000 result=40 09:15:56 Config A/D Result=40 09:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:56 Get A/D filter: -9.255963e+061 result=40 09:15:56 Get A/D value=-858993460 result=40 09:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:56 Aux= 09:15:56 Message to Camera, serial 216674 queued 09:16:05 Received message from Master: op=Shutter serial=216684 09:16:05 Shutter LASER close 09:16:05 Received message from Master: op=PointingHead serial=216688 09:16:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:16:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:16:06 Point started: ret=0 09:16:06 point_skyscan result=0 09:16:06 Check angles 09:16:06 SkyScan query 09:16:07 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.37<-21558 Statuses=0009 0009 09:16:07 Msec=0 True Az=135.81 Ze=-143.37 Az status=0009 Ze status=0009 09:16:07 Check angles 09:16:07 SkyScan query 09:16:08 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.935<-20129 Statuses=0009 0009 09:16:08 Msec=750 True Az=153.75 Ze=-121.935 Az status=0009 Ze status=0009 09:16:08 Check angles 09:16:08 SkyScan query 09:16:09 SkyScan query done: ret=0 az=171.255<-11417 ze=-101.025<-18735 Statuses=0009 0009 09:16:09 Msec=1500 True Az=171.255 Ze=-101.025 Az status=0009 Ze status=0009 09:16:09 Check angles 09:16:09 SkyScan query 09:16:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.085<-17339 Statuses=0008 0009 09:16:09 Msec=2250 True Az=175.995 Ze=-80.085 Az status=0008 Ze status=0009 09:16:09 Check angles 09:16:09 SkyScan query 09:16:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.115<-15941 Statuses=0008 0009 09:16:10 Msec=3000 True Az=175.995 Ze=-59.115 Az status=0008 Ze status=0009 09:16:10 Check angles 09:16:10 SkyScan query 09:16:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:16:11 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:16:11 Message to Master queued w/err=0: serial=216688 error=0 09:16:16 Received message from Master: op=Filter serial=216689 09:16:16 Color wheel filter change from 0 to 0 09:16:16 FLIGetFilterPos err=0 currentPosition=0 09:16:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:16 Filter is already there-color wheel unchanged 09:16:16 Received message from Master: op=Shutter serial=216690 09:16:16 Shutter LASER close 09:16:16 Received message from Camera: op=State serial=216692 09:16:16 GetSingleValue result=40 Value=cccccccc 09:16:16 SkyScan query 09:16:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:16:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:17 Parameters OK 09:16:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:17 Set A/D data flow result=40 09:16:17 Set A/D channel type result=40 09:16:17 Set A/D encoding result=40 09:16:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:17 Set channel filter=0.000000e+000 result=40 09:16:17 Config A/D Result=40 09:16:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:17 Get A/D filter: -9.255963e+061 result=40 09:16:17 Get A/D value=-858993460 result=40 09:16:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:17 Parameters OK 09:16:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:17 Set A/D data flow result=40 09:16:17 Set A/D channel type result=40 09:16:17 Set A/D encoding result=40 09:16:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:17 Set channel filter=0.000000e+000 result=40 09:16:17 Config A/D Result=40 09:16:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:17 Get A/D filter: -9.255963e+061 result=40 09:16:17 Get A/D value=-858993460 result=40 09:16:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:17 Aux= 09:16:17 Message to Camera, serial 216692 queued 09:16:53 Received message from Master: op=PointingHead serial=216705 09:16:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:16:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:16:54 Point started: ret=0 09:16:54 point_skyscan result=0 09:16:55 Check angles 09:16:55 SkyScan query 09:16:55 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.6<-13440 Statuses=0009 0009 09:16:55 Msec=0 True Az=152.775 Ze=-21.6 Az status=0009 Ze status=0009 09:16:55 Check angles 09:16:55 SkyScan query 09:16:56 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.57<-12038 Statuses=0009 0009 09:16:56 Msec=750 True Az=135.39 Ze=-0.57 Az status=0009 Ze status=0009 09:16:56 Check angles 09:16:56 SkyScan query 09:16:57 SkyScan query done: ret=0 az=117.825<-7855 ze=20.31<-10646 Statuses=0009 0009 09:16:57 Msec=1500 True Az=117.825 Ze=20.31 Az status=0009 Ze status=0009 09:16:57 Check angles 09:16:57 SkyScan query 09:16:57 SkyScan query done: ret=0 az=100.455<-6697 ze=41.355<-9243 Statuses=0009 0009 09:16:57 Msec=2250 True Az=100.455 Ze=41.355 Az status=0009 Ze status=0009 09:16:58 Check angles 09:16:58 SkyScan query 09:16:58 SkyScan query done: ret=0 az=85.98<-5732 ze=51.6<-8560 Statuses=0009 0008 09:16:58 Msec=3000 True Az=85.98 Ze=51.6 Az status=0009 Ze status=0008 09:16:58 Check angles 09:16:58 SkyScan query 09:16:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:16:59 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 09:16:59 Message to Master queued w/err=0: serial=216705 error=0 09:17:04 Received message from Master: op=Filter serial=216706 09:17:04 Color wheel filter change from 0 to 0 09:17:04 FLIGetFilterPos err=0 currentPosition=0 09:17:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:04 Filter is already there-color wheel unchanged 09:17:04 Received message from Master: op=Shutter serial=216707 09:17:04 Shutter LASER close 09:17:04 Received message from Camera: op=State serial=216709 09:17:04 GetSingleValue result=40 Value=cccccccc 09:17:04 SkyScan query 09:17:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:17:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:05 Parameters OK 09:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:05 Set A/D data flow result=40 09:17:05 Set A/D channel type result=40 09:17:05 Set A/D encoding result=40 09:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:05 Set channel filter=0.000000e+000 result=40 09:17:05 Config A/D Result=40 09:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:05 Get A/D filter: -9.255963e+061 result=40 09:17:05 Get A/D value=-858993460 result=40 09:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:05 Parameters OK 09:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:05 Set A/D data flow result=40 09:17:05 Set A/D channel type result=40 09:17:05 Set A/D encoding result=40 09:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:05 Set channel filter=0.000000e+000 result=40 09:17:05 Config A/D Result=40 09:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:05 Get A/D filter: -9.255963e+061 result=40 09:17:05 Get A/D value=-858993460 result=40 09:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:05 Aux= 09:17:05 Message to Camera, serial 216709 queued 09:17:42 Received message from Master: op=PointingHead serial=216722 09:17:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:17:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:17:42 Point started: ret=0 09:17:42 point_skyscan result=0 09:17:43 Check angles 09:17:43 SkyScan query 09:17:43 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 09:17:43 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 09:17:43 Check angles 09:17:43 SkyScan query 09:17:44 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 09:17:44 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 09:17:44 Check angles 09:17:44 SkyScan query 09:17:45 SkyScan query done: ret=0 az=144.345<-9623 ze=38.505<-9433 Statuses=0009 0008 09:17:45 Msec=1500 True Az=144.345 Ze=38.505 Az status=0009 Ze status=0008 09:17:45 Check angles 09:17:45 SkyScan query 09:17:45 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 09:17:45 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 09:17:46 Check angles 09:17:46 SkyScan query 09:17:46 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:17:46 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:17:46 Check angles 09:17:46 SkyScan query 09:17:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:17:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:17:47 Message to Master queued w/err=0: serial=216722 error=0 09:17:52 Received message from Master: op=Filter serial=216723 09:17:52 Color wheel filter change from 0 to 0 09:17:52 FLIGetFilterPos err=0 currentPosition=0 09:17:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:52 Filter is already there-color wheel unchanged 09:17:52 Received message from Master: op=Shutter serial=216724 09:17:52 Shutter LASER close 09:17:52 Received message from Camera: op=State serial=216726 09:17:52 GetSingleValue result=40 Value=cccccccc 09:17:52 SkyScan query 09:17:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:17:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:53 Parameters OK 09:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:53 Set A/D data flow result=40 09:17:53 Set A/D channel type result=40 09:17:53 Set A/D encoding result=40 09:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:53 Set channel filter=0.000000e+000 result=40 09:17:53 Config A/D Result=40 09:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:53 Get A/D filter: -9.255963e+061 result=40 09:17:53 Get A/D value=-858993460 result=40 09:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:53 Parameters OK 09:17:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:53 Set A/D data flow result=40 09:17:53 Set A/D channel type result=40 09:17:53 Set A/D encoding result=40 09:17:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:53 Set channel filter=0.000000e+000 result=40 09:17:53 Config A/D Result=40 09:17:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:53 Get A/D filter: -9.255963e+061 result=40 09:17:53 Get A/D value=-858993460 result=40 09:17:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:53 Aux= 09:17:53 Message to Camera, serial 216726 queued 09:18:30 Received message from Master: op=PointingHead serial=216739 09:18:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:18:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:18:30 Point started: ret=0 09:18:30 point_skyscan result=0 09:18:31 Check angles 09:18:31 SkyScan query 09:18:31 SkyScan query done: ret=0 az=152.715<-10181 ze=8.265<-11449 Statuses=0009 0009 09:18:31 Msec=0 True Az=152.715 Ze=8.265 Az status=0009 Ze status=0009 09:18:31 Check angles 09:18:31 SkyScan query 09:18:32 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.6<-12840 Statuses=0009 0009 09:18:32 Msec=750 True Az=135.18 Ze=-12.6 Az status=0009 Ze status=0009 09:18:32 Check angles 09:18:32 SkyScan query 09:18:33 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.63<-14242 Statuses=0009 0009 09:18:33 Msec=1500 True Az=117.615 Ze=-33.63 Az status=0009 Ze status=0009 09:18:33 Check angles 09:18:33 SkyScan query 09:18:34 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 09:18:34 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 09:18:34 Check angles 09:18:34 SkyScan query 09:18:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:18:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:18:34 Check angles 09:18:34 SkyScan query 09:18:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:18:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:18:35 Message to Master queued w/err=0: serial=216739 error=0 09:18:40 Received message from Master: op=Filter serial=216740 09:18:40 Color wheel filter change from 0 to 0 09:18:40 FLIGetFilterPos err=0 currentPosition=0 09:18:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:40 Filter is already there-color wheel unchanged 09:18:40 Received message from Master: op=Shutter serial=216741 09:18:40 Shutter LASER close 09:18:40 Received message from Camera: op=State serial=216743 09:18:40 GetSingleValue result=40 Value=cccccccc 09:18:40 SkyScan query 09:18:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:18:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:41 Parameters OK 09:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:41 Set A/D data flow result=40 09:18:41 Set A/D channel type result=40 09:18:41 Set A/D encoding result=40 09:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:41 Set channel filter=0.000000e+000 result=40 09:18:41 Config A/D Result=40 09:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:41 Get A/D filter: -9.255963e+061 result=40 09:18:41 Get A/D value=-858993460 result=40 09:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:41 Parameters OK 09:18:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:41 Set A/D data flow result=40 09:18:41 Set A/D channel type result=40 09:18:41 Set A/D encoding result=40 09:18:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:41 Set channel filter=0.000000e+000 result=40 09:18:41 Config A/D Result=40 09:18:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:41 Get A/D filter: -9.255963e+061 result=40 09:18:41 Get A/D value=-858993460 result=40 09:18:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:41 Aux= 09:18:41 Message to Camera, serial 216743 queued 09:19:17 Received message from Master: op=PointingHead serial=216755 09:19:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:19:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:19:17 Point started: ret=0 09:19:17 point_skyscan result=0 09:19:18 Check angles 09:19:18 SkyScan query 09:19:18 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.555<-17437 Statuses=0009 0009 09:19:18 Msec=0 True Az=109.335 Ze=-81.555 Az status=0009 Ze status=0009 09:19:19 Check angles 09:19:19 SkyScan query 09:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 09:19:19 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 09:19:19 Check angles 09:19:19 SkyScan query 09:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 09:19:20 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 09:19:20 Check angles 09:19:20 SkyScan query 09:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.78<-21652 Statuses=0008 0009 09:19:21 Msec=2250 True Az=112.995 Ze=-144.78 Az status=0008 Ze status=0009 09:19:21 Check angles 09:19:21 SkyScan query 09:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.2<-23080 Statuses=0008 0009 09:19:21 Msec=3000 True Az=112.995 Ze=-166.2 Az status=0008 Ze status=0009 09:19:22 Check angles 09:19:22 SkyScan query 09:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:19:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:19:22 Message to Master queued w/err=0: serial=216755 error=0 09:19:27 Received message from Master: op=Filter serial=216756 09:19:27 Color wheel filter change from 0 to 0 09:19:27 FLIGetFilterPos err=0 currentPosition=0 09:19:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:27 Filter is already there-color wheel unchanged 09:19:27 Received message from Master: op=Shutter serial=216757 09:19:27 Shutter LASER open 09:19:28 Received message from Camera: op=State serial=216759 09:19:28 GetSingleValue result=40 Value=cccccccc 09:19:28 SkyScan query 09:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:19:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:28 Parameters OK 09:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:28 Set A/D data flow result=40 09:19:28 Set A/D channel type result=40 09:19:28 Set A/D encoding result=40 09:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:28 Set channel filter=0.000000e+000 result=40 09:19:28 Config A/D Result=40 09:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:28 Get A/D filter: -9.255963e+061 result=40 09:19:28 Get A/D value=-858993460 result=40 09:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:28 Parameters OK 09:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:28 Set A/D data flow result=40 09:19:28 Set A/D channel type result=40 09:19:28 Set A/D encoding result=40 09:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:28 Set channel filter=0.000000e+000 result=40 09:19:28 Config A/D Result=40 09:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:28 Get A/D filter: -9.255963e+061 result=40 09:19:28 Get A/D value=-858993460 result=40 09:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:28 Aux= 09:19:28 Message to Camera, serial 216759 queued 09:19:37 Received message from Master: op=Shutter serial=216769 09:19:37 Shutter LASER close 09:19:37 Received message from Master: op=PointingHead serial=216773 09:19:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:19:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:19:37 Point started: ret=0 09:19:37 point_skyscan result=0 09:19:38 Check angles 09:19:38 SkyScan query 09:19:39 SkyScan query done: ret=0 az=89.88<-5992 ze=157.215<-1519 Statuses=0009 0009 09:19:39 Msec=0 True Az=89.88 Ze=157.215 Az status=0009 Ze status=0009 09:19:39 Check angles 09:19:39 SkyScan query 09:19:39 SkyScan query done: ret=0 az=72.45<-4830 ze=136.26<-2916 Statuses=0009 0009 09:19:39 Msec=750 True Az=72.45 Ze=136.26 Az status=0009 Ze status=0009 09:19:40 Check angles 09:19:40 SkyScan query 09:19:40 SkyScan query done: ret=0 az=54.945<-3663 ze=115.35<-4310 Statuses=0009 0009 09:19:40 Msec=1500 True Az=54.945 Ze=115.35 Az status=0009 Ze status=0009 09:19:40 Check angles 09:19:40 SkyScan query 09:19:41 SkyScan query done: ret=0 az=40.965<-2731 ze=93.93<-5738 Statuses=0009 0009 09:19:41 Msec=2250 True Az=40.965 Ze=93.93 Az status=0009 Ze status=0009 09:19:41 Check angles 09:19:41 SkyScan query 09:19:42 SkyScan query done: ret=0 az=40.995<-2733 ze=72.915<-7139 Statuses=0008 0009 09:19:42 Msec=3000 True Az=40.995 Ze=72.915 Az status=0008 Ze status=0009 09:19:42 Check angles 09:19:42 SkyScan query 09:19:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 09:19:42 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 09:19:43 Check angles 09:19:43 SkyScan query 09:19:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:19:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:19:43 Message to Master queued w/err=0: serial=216773 error=0 09:19:48 Received message from Master: op=Filter serial=216774 09:19:48 Color wheel filter change from 0 to 0 09:19:48 FLIGetFilterPos err=0 currentPosition=0 09:19:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:48 Filter is already there-color wheel unchanged 09:19:48 Received message from Master: op=Shutter serial=216775 09:19:48 Shutter LASER close 09:19:49 Received message from Camera: op=State serial=216777 09:19:49 GetSingleValue result=40 Value=cccccccc 09:19:49 SkyScan query 09:19:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:19:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:49 Parameters OK 09:19:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:49 Set A/D data flow result=40 09:19:49 Set A/D channel type result=40 09:19:49 Set A/D encoding result=40 09:19:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:49 Set channel filter=0.000000e+000 result=40 09:19:49 Config A/D Result=40 09:19:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:49 Get A/D filter: -9.255963e+061 result=40 09:19:49 Get A/D value=-858993460 result=40 09:19:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:49 Parameters OK 09:19:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:49 Set A/D data flow result=40 09:19:49 Set A/D channel type result=40 09:19:49 Set A/D encoding result=40 09:19:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:49 Set channel filter=0.000000e+000 result=40 09:19:49 Config A/D Result=40 09:19:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:49 Get A/D filter: -9.255963e+061 result=40 09:19:49 Get A/D value=-858993460 result=40 09:19:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:49 Aux= 09:19:49 Message to Camera, serial 216777 queued 09:20:26 Received message from Master: op=PointingHead serial=216790 09:20:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:20:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:20:26 Point started: ret=0 09:20:26 point_skyscan result=0 09:20:27 Check angles 09:20:27 SkyScan query 09:20:28 SkyScan query done: ret=0 az=64.02<-4268 ze=66.51<-7566 Statuses=0009 0008 09:20:28 Msec=0 True Az=64.02 Ze=66.51 Az status=0009 Ze status=0008 09:20:28 Check angles 09:20:28 SkyScan query 09:20:28 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 09:20:28 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 09:20:29 Check angles 09:20:29 SkyScan query 09:20:29 SkyScan query done: ret=0 az=98.985<-6599 ze=66.495<-7567 Statuses=0009 0008 09:20:29 Msec=1500 True Az=98.985 Ze=66.495 Az status=0009 Ze status=0008 09:20:29 Check angles 09:20:29 SkyScan query 09:20:30 SkyScan query done: ret=0 az=116.445<-7763 ze=66.495<-7567 Statuses=0009 0008 09:20:30 Msec=2250 True Az=116.445 Ze=66.495 Az status=0009 Ze status=0008 09:20:30 Check angles 09:20:30 SkyScan query 09:20:31 SkyScan query done: ret=0 az=134.25<-8950 ze=66.495<-7567 Statuses=0009 0008 09:20:31 Msec=3000 True Az=134.25 Ze=66.495 Az status=0009 Ze status=0008 09:20:31 Check angles 09:20:31 SkyScan query 09:20:31 SkyScan query done: ret=0 az=152.07<-10138 ze=66.495<-7567 Statuses=0009 0008 09:20:31 Msec=3750 True Az=152.07 Ze=66.495 Az status=0009 Ze status=0008 09:20:32 Check angles 09:20:32 SkyScan query 09:20:32 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:20:32 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:20:32 Message to Master queued w/err=0: serial=216790 error=0 09:20:37 Received message from Master: op=Filter serial=216791 09:20:37 Color wheel filter change from 0 to 0 09:20:37 FLIGetFilterPos err=0 currentPosition=0 09:20:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:37 Filter is already there-color wheel unchanged 09:20:37 Received message from Master: op=Shutter serial=216792 09:20:37 Shutter LASER close 09:20:37 Received message from Camera: op=State serial=216794 09:20:37 GetSingleValue result=40 Value=cccccccc 09:20:37 SkyScan query 09:20:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:20:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:38 Parameters OK 09:20:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:38 Set A/D data flow result=40 09:20:38 Set A/D channel type result=40 09:20:38 Set A/D encoding result=40 09:20:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:38 Set channel filter=0.000000e+000 result=40 09:20:38 Config A/D Result=40 09:20:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:38 Get A/D filter: -9.255963e+061 result=40 09:20:38 Get A/D value=-858993460 result=40 09:20:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:38 Parameters OK 09:20:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:38 Set A/D data flow result=40 09:20:38 Set A/D channel type result=40 09:20:38 Set A/D encoding result=40 09:20:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:38 Set channel filter=0.000000e+000 result=40 09:20:38 Config A/D Result=40 09:20:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:38 Get A/D filter: -9.255963e+061 result=40 09:20:38 Get A/D value=-858993460 result=40 09:20:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:38 Aux= 09:20:38 Message to Camera, serial 216794 queued 09:21:14 Received message from Master: op=PointingHead serial=216806 09:21:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:21:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:21:14 Point started: ret=0 09:21:14 point_skyscan result=0 09:21:15 Check angles 09:21:15 SkyScan query 09:21:16 SkyScan query done: ret=0 az=134.835<-8989 ze=96.42<-5572 Statuses=0009 0009 09:21:16 Msec=0 True Az=134.835 Ze=96.42 Az status=0009 Ze status=0009 09:21:16 Check angles 09:21:16 SkyScan query 09:21:17 SkyScan query done: ret=0 az=130.995<-8733 ze=117.39<-4174 Statuses=0008 0009 09:21:17 Msec=750 True Az=130.995 Ze=117.39 Az status=0008 Ze status=0009 09:21:17 Check angles 09:21:17 SkyScan query 09:21:17 SkyScan query done: ret=0 az=130.995<-8733 ze=138.27<-2782 Statuses=0008 0009 09:21:17 Msec=1500 True Az=130.995 Ze=138.27 Az status=0008 Ze status=0009 09:21:17 Check angles 09:21:17 SkyScan query 09:21:18 SkyScan query done: ret=0 az=130.995<-8733 ze=159.27<-1382 Statuses=0008 0009 09:21:18 Msec=2250 True Az=130.995 Ze=159.27 Az status=0008 Ze status=0009 09:21:18 Check angles 09:21:18 SkyScan query 09:21:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.79<-23986 Statuses=0008 0009 09:21:19 Msec=3000 True Az=130.995 Ze=-179.79 Az status=0008 Ze status=0009 09:21:19 Check angles 09:21:19 SkyScan query 09:21:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.835<-22589 Statuses=0008 0009 09:21:20 Msec=3750 True Az=130.995 Ze=-158.835 Az status=0008 Ze status=0009 09:21:20 Check angles 09:21:20 SkyScan query 09:21:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 09:21:20 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 09:21:20 Check angles 09:21:20 SkyScan query 09:21:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:21:21 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:21:21 Message to Master queued w/err=0: serial=216806 error=0 09:21:26 Received message from Master: op=Filter serial=216807 09:21:26 Color wheel filter change from 0 to 0 09:21:26 FLIGetFilterPos err=0 currentPosition=0 09:21:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:26 Filter is already there-color wheel unchanged 09:21:26 Received message from Master: op=Shutter serial=216808 09:21:26 Shutter LASER close 09:21:26 Received message from Camera: op=State serial=216810 09:21:26 GetSingleValue result=40 Value=cccccccc 09:21:26 SkyScan query 09:21:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:21:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:27 Parameters OK 09:21:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:27 Set A/D data flow result=40 09:21:27 Set A/D channel type result=40 09:21:27 Set A/D encoding result=40 09:21:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:27 Set channel filter=0.000000e+000 result=40 09:21:27 Config A/D Result=40 09:21:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:27 Get A/D filter: -9.255963e+061 result=40 09:21:27 Get A/D value=-858993460 result=40 09:21:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:27 Parameters OK 09:21:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:27 Set A/D data flow result=40 09:21:27 Set A/D channel type result=40 09:21:27 Set A/D encoding result=40 09:21:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:27 Set channel filter=0.000000e+000 result=40 09:21:27 Config A/D Result=40 09:21:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:27 Get A/D filter: -9.255963e+061 result=40 09:21:27 Get A/D value=-858993460 result=40 09:21:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:27 Aux= 09:21:27 Message to Camera, serial 216810 queued 09:22:04 Received message from Master: op=PointingHead serial=216823 09:22:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:22:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:22:04 Point started: ret=0 09:22:04 point_skyscan result=0 09:22:05 Check angles 09:22:05 SkyScan query 09:22:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.51<-23434 Statuses=0008 0009 09:22:05 Msec=0 True Az=112.995 Ze=-171.51 Az status=0008 Ze status=0009 09:22:06 Check angles 09:22:06 SkyScan query 09:22:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:22:06 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:22:06 Message to Master queued w/err=0: serial=216823 error=0 09:22:11 Received message from Master: op=Filter serial=216824 09:22:11 Color wheel filter change from 0 to 0 09:22:11 FLIGetFilterPos err=0 currentPosition=0 09:22:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:11 Filter is already there-color wheel unchanged 09:22:11 Received message from Master: op=Shutter serial=216825 09:22:11 Shutter LASER open 09:22:11 Received message from Camera: op=State serial=216827 09:22:11 GetSingleValue result=40 Value=cccccccc 09:22:11 SkyScan query 09:22:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:22:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:12 Parameters OK 09:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:12 Set A/D data flow result=40 09:22:12 Set A/D channel type result=40 09:22:12 Set A/D encoding result=40 09:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:12 Set channel filter=0.000000e+000 result=40 09:22:12 Config A/D Result=40 09:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:12 Get A/D filter: -9.255963e+061 result=40 09:22:12 Get A/D value=-858993460 result=40 09:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:12 Parameters OK 09:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:12 Set A/D data flow result=40 09:22:12 Set A/D channel type result=40 09:22:12 Set A/D encoding result=40 09:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:12 Set channel filter=0.000000e+000 result=40 09:22:12 Config A/D Result=40 09:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:12 Get A/D filter: -9.255963e+061 result=40 09:22:12 Get A/D value=-858993460 result=40 09:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:12 Aux= 09:22:12 Message to Camera, serial 216827 queued 09:22:20 Received message from Master: op=Shutter serial=216837 09:22:21 Shutter LASER close 09:22:21 Received message from Master: op=PointingHead serial=216841 09:22:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:22:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:22:21 Point started: ret=0 09:22:21 point_skyscan result=0 09:22:22 Check angles 09:22:22 SkyScan query 09:22:23 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.4<-21560 Statuses=0009 0009 09:22:23 Msec=0 True Az=135.81 Ze=-143.4 Az status=0009 Ze status=0009 09:22:23 Check angles 09:22:23 SkyScan query 09:22:24 SkyScan query done: ret=0 az=153.345<-10223 ze=-122.43<-20162 Statuses=0009 0009 09:22:24 Msec=750 True Az=153.345 Ze=-122.43 Az status=0009 Ze status=0009 09:22:24 Check angles 09:22:24 SkyScan query 09:22:24 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.565<-18771 Statuses=0009 0009 09:22:24 Msec=1500 True Az=170.835 Ze=-101.565 Az status=0009 Ze status=0009 09:22:24 Check angles 09:22:24 SkyScan query 09:22:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.52<-17368 Statuses=0008 0009 09:22:25 Msec=2250 True Az=175.995 Ze=-80.52 Az status=0008 Ze status=0009 09:22:25 Check angles 09:22:25 SkyScan query 09:22:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.595<-15973 Statuses=0008 0009 09:22:26 Msec=3000 True Az=175.995 Ze=-59.595 Az status=0008 Ze status=0009 09:22:26 Check angles 09:22:26 SkyScan query 09:22:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:22:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:22:27 Message to Master queued w/err=0: serial=216841 error=0 09:22:32 Received message from Master: op=Filter serial=216842 09:22:32 Color wheel filter change from 0 to 0 09:22:32 FLIGetFilterPos err=0 currentPosition=0 09:22:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:32 Filter is already there-color wheel unchanged 09:22:32 Received message from Master: op=Shutter serial=216843 09:22:32 Shutter LASER close 09:22:32 Received message from Camera: op=State serial=216845 09:22:32 GetSingleValue result=40 Value=cccccccc 09:22:32 SkyScan query 09:22:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:22:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:32 Parameters OK 09:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:32 Set A/D data flow result=40 09:22:32 Set A/D channel type result=40 09:22:32 Set A/D encoding result=40 09:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:32 Set channel filter=0.000000e+000 result=40 09:22:32 Config A/D Result=40 09:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:32 Get A/D filter: -9.255963e+061 result=40 09:22:32 Get A/D value=-858993460 result=40 09:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:32 Parameters OK 09:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:32 Set A/D data flow result=40 09:22:32 Set A/D channel type result=40 09:22:32 Set A/D encoding result=40 09:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:32 Set channel filter=0.000000e+000 result=40 09:22:32 Config A/D Result=40 09:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:32 Get A/D filter: -9.255963e+061 result=40 09:22:32 Get A/D value=-858993460 result=40 09:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:32 Aux= 09:22:32 Message to Camera, serial 216845 queued 09:23:09 Received message from Master: op=PointingHead serial=216858 09:23:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:23:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:23:10 Point started: ret=0 09:23:10 point_skyscan result=0 09:23:10 Check angles 09:23:10 SkyScan query 09:23:11 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.48<-13432 Statuses=0009 0009 09:23:11 Msec=0 True Az=152.775 Ze=-21.48 Az status=0009 Ze status=0009 09:23:11 Check angles 09:23:11 SkyScan query 09:23:12 SkyScan query done: ret=0 az=134.88<-8992 ze=-0.075<-12005 Statuses=0009 0009 09:23:12 Msec=750 True Az=134.88 Ze=-0.075 Az status=0009 Ze status=0009 09:23:12 Check angles 09:23:12 SkyScan query 09:23:12 SkyScan query done: ret=0 az=117.405<-7827 ze=20.925<-10605 Statuses=0009 0009 09:23:12 Msec=1500 True Az=117.405 Ze=20.925 Az status=0009 Ze status=0009 09:23:13 Check angles 09:23:13 SkyScan query 09:23:13 SkyScan query done: ret=0 az=100.05<-6670 ze=41.82<-9212 Statuses=0009 0009 09:23:13 Msec=2250 True Az=100.05 Ze=41.82 Az status=0009 Ze status=0009 09:23:13 Check angles 09:23:13 SkyScan query 09:23:14 SkyScan query done: ret=0 az=86.025<-5735 ze=51.57<-8562 Statuses=0009 0008 09:23:14 Msec=3000 True Az=86.025 Ze=51.57 Az status=0009 Ze status=0008 09:23:14 Check angles 09:23:14 SkyScan query 09:23:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:23:15 Msec=3750 True Az=85.995 Ze=51.48 Az status=0008 Ze status=0008 09:23:15 Message to Master queued w/err=0: serial=216858 error=0 09:23:20 Received message from Master: op=Filter serial=216859 09:23:20 Color wheel filter change from 0 to 0 09:23:20 FLIGetFilterPos err=0 currentPosition=0 09:23:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:20 Filter is already there-color wheel unchanged 09:23:20 Received message from Master: op=Shutter serial=216860 09:23:20 Shutter LASER close 09:23:20 Received message from Camera: op=State serial=216862 09:23:20 GetSingleValue result=40 Value=cccccccc 09:23:20 SkyScan query 09:23:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.48<-8568 Statuses=0008 0008 09:23:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:21 Parameters OK 09:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:21 Set A/D data flow result=40 09:23:21 Set A/D channel type result=40 09:23:21 Set A/D encoding result=40 09:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:21 Set channel filter=0.000000e+000 result=40 09:23:21 Config A/D Result=40 09:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:21 Get A/D filter: -9.255963e+061 result=40 09:23:21 Get A/D value=-858993460 result=40 09:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:21 Parameters OK 09:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:21 Set A/D data flow result=40 09:23:21 Set A/D channel type result=40 09:23:21 Set A/D encoding result=40 09:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:21 Set channel filter=0.000000e+000 result=40 09:23:21 Config A/D Result=40 09:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:21 Get A/D filter: -9.255963e+061 result=40 09:23:21 Get A/D value=-858993460 result=40 09:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:21 Aux= 09:23:21 Message to Camera, serial 216862 queued 09:23:57 Received message from Master: op=PointingHead serial=216875 09:23:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:23:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:23:58 Point started: ret=0 09:23:58 point_skyscan result=0 09:23:58 Check angles 09:23:58 SkyScan query 09:23:59 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 09:23:59 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 09:23:59 Check angles 09:23:59 SkyScan query 09:24:00 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 09:24:00 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 09:24:00 Check angles 09:24:00 SkyScan query 09:24:01 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 09:24:01 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 09:24:01 Check angles 09:24:01 SkyScan query 09:24:01 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 09:24:01 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 09:24:01 Check angles 09:24:01 SkyScan query 09:24:02 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:24:02 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:24:02 Check angles 09:24:02 SkyScan query 09:24:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:24:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:24:03 Message to Master queued w/err=0: serial=216875 error=0 09:24:08 Received message from Master: op=Filter serial=216876 09:24:08 Color wheel filter change from 0 to 0 09:24:08 FLIGetFilterPos err=0 currentPosition=0 09:24:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:08 Filter is already there-color wheel unchanged 09:24:08 Received message from Master: op=Shutter serial=216877 09:24:08 Shutter LASER close 09:24:08 Received message from Camera: op=State serial=216879 09:24:08 GetSingleValue result=40 Value=cccccccc 09:24:08 SkyScan query 09:24:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:24:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:09 Parameters OK 09:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:09 Set A/D data flow result=40 09:24:09 Set A/D channel type result=40 09:24:09 Set A/D encoding result=40 09:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:09 Set channel filter=0.000000e+000 result=40 09:24:09 Config A/D Result=40 09:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:09 Get A/D filter: -9.255963e+061 result=40 09:24:09 Get A/D value=-858993460 result=40 09:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:09 Parameters OK 09:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:09 Set A/D data flow result=40 09:24:09 Set A/D channel type result=40 09:24:09 Set A/D encoding result=40 09:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:09 Set channel filter=0.000000e+000 result=40 09:24:09 Config A/D Result=40 09:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:09 Get A/D filter: -9.255963e+061 result=40 09:24:09 Get A/D value=-858993460 result=40 09:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:09 Aux= 09:24:09 Message to Camera, serial 216879 queued 09:24:45 Received message from Master: op=PointingHead serial=216892 09:24:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:24:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:24:46 Point started: ret=0 09:24:46 point_skyscan result=0 09:24:46 Check angles 09:24:46 SkyScan query 09:24:47 SkyScan query done: ret=0 az=152.94<-10196 ze=8.625<-11425 Statuses=0009 0009 09:24:47 Msec=0 True Az=152.94 Ze=8.625 Az status=0009 Ze status=0009 09:24:47 Check angles 09:24:47 SkyScan query 09:24:48 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.285<-12819 Statuses=0009 0009 09:24:48 Msec=750 True Az=135.435 Ze=-12.285 Az status=0009 Ze status=0009 09:24:48 Check angles 09:24:48 SkyScan query 09:24:49 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.75<-14250 Statuses=0009 0009 09:24:49 Msec=1500 True Az=117.615 Ze=-33.75 Az status=0009 Ze status=0009 09:24:49 Check angles 09:24:49 SkyScan query 09:24:49 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 09:24:49 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 09:24:49 Check angles 09:24:49 SkyScan query 09:24:50 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:24:50 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:24:50 Check angles 09:24:50 SkyScan query 09:24:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:24:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:24:51 Message to Master queued w/err=0: serial=216892 error=0 09:24:56 Received message from Master: op=Filter serial=216893 09:24:56 Color wheel filter change from 0 to 0 09:24:56 FLIGetFilterPos err=0 currentPosition=0 09:24:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:56 Filter is already there-color wheel unchanged 09:24:56 Received message from Master: op=Shutter serial=216894 09:24:56 Shutter LASER close 09:24:56 Received message from Camera: op=State serial=216896 09:24:56 GetSingleValue result=40 Value=cccccccc 09:24:56 SkyScan query 09:24:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:24:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:57 Parameters OK 09:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:57 Set A/D data flow result=40 09:24:57 Set A/D channel type result=40 09:24:57 Set A/D encoding result=40 09:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:57 Set channel filter=0.000000e+000 result=40 09:24:57 Config A/D Result=40 09:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:57 Get A/D filter: -9.255963e+061 result=40 09:24:57 Get A/D value=-858993460 result=40 09:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:57 Parameters OK 09:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:57 Set A/D data flow result=40 09:24:57 Set A/D channel type result=40 09:24:57 Set A/D encoding result=40 09:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:57 Set channel filter=0.000000e+000 result=40 09:24:57 Config A/D Result=40 09:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:57 Get A/D filter: -9.255963e+061 result=40 09:24:57 Get A/D value=-858993460 result=40 09:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:57 Aux= 09:24:57 Message to Camera, serial 216896 queued 09:25:34 Received message from Master: op=PointingHead serial=216909 09:25:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:25:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:25:34 Point started: ret=0 09:25:34 point_skyscan result=0 09:25:35 Check angles 09:25:35 SkyScan query 09:25:35 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.75<-17450 Statuses=0009 0009 09:25:35 Msec=0 True Az=109.335 Ze=-81.75 Az status=0009 Ze status=0009 09:25:35 Check angles 09:25:35 SkyScan query 09:25:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 09:25:36 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 09:25:36 Check angles 09:25:36 SkyScan query 09:25:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 09:25:37 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 09:25:37 Check angles 09:25:37 SkyScan query 09:25:37 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.525<-21635 Statuses=0008 0009 09:25:37 Msec=2250 True Az=112.98 Ze=-144.525 Az status=0008 Ze status=0009 09:25:38 Check angles 09:25:38 SkyScan query 09:25:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.525<-23035 Statuses=0008 0009 09:25:38 Msec=3000 True Az=112.995 Ze=-165.525 Az status=0008 Ze status=0009 09:25:38 Check angles 09:25:38 SkyScan query 09:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:25:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 [UTC 2018-12-17 09:25:39] 09:25:39 Message to Master queued w/err=0: serial=216909 error=0 09:25:44 Received message from Master: op=Filter serial=216910 09:25:44 Color wheel filter change from 0 to 0 09:25:44 FLIGetFilterPos err=0 currentPosition=0 09:25:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:44 Filter is already there-color wheel unchanged 09:25:44 Received message from Master: op=Shutter serial=216911 09:25:44 Shutter LASER open 09:25:44 Received message from Camera: op=State serial=216913 09:25:44 GetSingleValue result=40 Value=cccccccc 09:25:44 SkyScan query 09:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:25:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:45 Parameters OK 09:25:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:45 Set A/D data flow result=40 09:25:45 Set A/D channel type result=40 09:25:45 Set A/D encoding result=40 09:25:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:45 Set channel filter=0.000000e+000 result=40 09:25:45 Config A/D Result=40 09:25:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:45 Get A/D filter: -9.255963e+061 result=40 09:25:45 Get A/D value=-858993460 result=40 09:25:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:45 Parameters OK 09:25:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:45 Set A/D data flow result=40 09:25:45 Set A/D channel type result=40 09:25:45 Set A/D encoding result=40 09:25:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:45 Set channel filter=0.000000e+000 result=40 09:25:45 Config A/D Result=40 09:25:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:45 Get A/D filter: -9.255963e+061 result=40 09:25:45 Get A/D value=-858993460 result=40 09:25:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:45 Aux= 09:25:45 Message to Camera, serial 216913 queued 09:25:53 Received message from Master: op=Shutter serial=216923 09:25:53 Shutter LASER close 09:25:54 Received message from Master: op=PointingHead serial=216927 09:25:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:25:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:25:54 Point started: ret=0 09:25:54 point_skyscan result=0 09:25:55 Check angles 09:25:55 SkyScan query 09:25:55 SkyScan query done: ret=0 az=90.045<-6003 ze=157.44<-1504 Statuses=0009 0009 09:25:55 Msec=0 True Az=90.045 Ze=157.44 Az status=0009 Ze status=0009 09:25:56 Check angles 09:25:56 SkyScan query 09:25:56 SkyScan query done: ret=0 az=72.525<-4835 ze=136.44<-2904 Statuses=0009 0009 09:25:56 Msec=750 True Az=72.525 Ze=136.44 Az status=0009 Ze status=0009 09:25:56 Check angles 09:25:56 SkyScan query 09:25:57 SkyScan query done: ret=0 az=55.185<-3679 ze=115.56<-4296 Statuses=0009 0009 09:25:57 Msec=1500 True Az=55.185 Ze=115.56 Az status=0009 Ze status=0009 09:25:57 Check angles 09:25:57 SkyScan query 09:25:58 SkyScan query done: ret=0 az=40.965<-2731 ze=94.575<-5695 Statuses=0009 0009 09:25:58 Msec=2250 True Az=40.965 Ze=94.575 Az status=0009 Ze status=0009 09:25:58 Check angles 09:25:58 SkyScan query 09:25:58 SkyScan query done: ret=0 az=40.995<-2733 ze=73.65<-7090 Statuses=0008 0009 09:25:58 Msec=3000 True Az=40.995 Ze=73.65 Az status=0008 Ze status=0009 09:25:59 Check angles 09:25:59 SkyScan query 09:25:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.965<-8469 Statuses=0008 0009 09:25:59 Msec=3750 True Az=40.995 Ze=52.965 Az status=0008 Ze status=0009 09:25:59 Check angles 09:25:59 SkyScan query 09:26:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:26:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:26:00 Message to Master queued w/err=0: serial=216927 error=0 09:26:05 Received message from Master: op=Filter serial=216928 09:26:05 Color wheel filter change from 0 to 0 09:26:05 FLIGetFilterPos err=0 currentPosition=0 09:26:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:05 Filter is already there-color wheel unchanged 09:26:05 Received message from Master: op=Shutter serial=216929 09:26:05 Shutter LASER close 09:26:05 Received message from Camera: op=State serial=216931 09:26:05 GetSingleValue result=40 Value=cccccccc 09:26:05 SkyScan query 09:26:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:26:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:06 Parameters OK 09:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:06 Set A/D data flow result=40 09:26:06 Set A/D channel type result=40 09:26:06 Set A/D encoding result=40 09:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:06 Set channel filter=0.000000e+000 result=40 09:26:06 Config A/D Result=40 09:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:06 Get A/D filter: -9.255963e+061 result=40 09:26:06 Get A/D value=-858993460 result=40 09:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:06 Parameters OK 09:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:06 Set A/D data flow result=40 09:26:06 Set A/D channel type result=40 09:26:06 Set A/D encoding result=40 09:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:06 Set channel filter=0.000000e+000 result=40 09:26:06 Config A/D Result=40 09:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:06 Get A/D filter: -9.255963e+061 result=40 09:26:06 Get A/D value=-858993460 result=40 09:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:06 Aux= 09:26:06 Message to Camera, serial 216931 queued 09:26:43 Received message from Master: op=PointingHead serial=216944 09:26:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:26:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:26:43 Point started: ret=0 09:26:43 point_skyscan result=0 09:26:44 Check angles 09:26:44 SkyScan query 09:26:44 SkyScan query done: ret=0 az=64.185<-4279 ze=66.51<-7566 Statuses=0009 0008 09:26:44 Msec=0 True Az=64.185 Ze=66.51 Az status=0009 Ze status=0008 09:26:45 Check angles 09:26:45 SkyScan query 09:26:45 SkyScan query done: ret=0 az=81.585<-5439 ze=66.51<-7566 Statuses=0009 0008 09:26:45 Msec=750 True Az=81.585 Ze=66.51 Az status=0009 Ze status=0008 09:26:45 Check angles 09:26:45 SkyScan query 09:26:46 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 09:26:46 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 09:26:46 Check angles 09:26:46 SkyScan query 09:26:47 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 09:26:47 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 09:26:47 Check angles 09:26:47 SkyScan query 09:26:47 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 09:26:47 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 09:26:48 Check angles 09:26:48 SkyScan query 09:26:48 SkyScan query done: ret=0 az=151.74<-10116 ze=66.495<-7567 Statuses=0009 0008 09:26:48 Msec=3750 True Az=151.74 Ze=66.495 Az status=0009 Ze status=0008 09:26:48 Check angles 09:26:48 SkyScan query 09:26:49 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:26:49 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:26:49 Message to Master queued w/err=0: serial=216944 error=0 09:26:54 Received message from Master: op=Filter serial=216945 09:26:54 Color wheel filter change from 0 to 0 09:26:54 FLIGetFilterPos err=0 currentPosition=0 09:26:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:54 Filter is already there-color wheel unchanged 09:26:54 Received message from Master: op=Shutter serial=216946 09:26:54 Shutter LASER close 09:26:54 Received message from Camera: op=State serial=216948 09:26:54 GetSingleValue result=40 Value=cccccccc 09:26:54 SkyScan query 09:26:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:26:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:55 Parameters OK 09:26:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:55 Set A/D data flow result=40 09:26:55 Set A/D channel type result=40 09:26:55 Set A/D encoding result=40 09:26:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:55 Set channel filter=0.000000e+000 result=40 09:26:55 Config A/D Result=40 09:26:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:55 Get A/D filter: -9.255963e+061 result=40 09:26:55 Get A/D value=-858993460 result=40 09:26:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:55 Parameters OK 09:26:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:55 Set A/D data flow result=40 09:26:55 Set A/D channel type result=40 09:26:55 Set A/D encoding result=40 09:26:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:55 Set channel filter=0.000000e+000 result=40 09:26:55 Config A/D Result=40 09:26:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:55 Get A/D filter: -9.255963e+061 result=40 09:26:55 Get A/D value=-858993460 result=40 09:26:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:55 Aux= 09:26:55 Message to Camera, serial 216948 queued 09:27:32 Received message from Master: op=PointingHead serial=216961 09:27:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:27:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:27:32 Point started: ret=0 09:27:32 point_skyscan result=0 09:27:33 Check angles 09:27:33 SkyScan query 09:27:33 SkyScan query done: ret=0 az=134.835<-8989 ze=96.405<-5573 Statuses=0009 0009 09:27:33 Msec=0 True Az=134.835 Ze=96.405 Az status=0009 Ze status=0009 09:27:33 Check angles 09:27:33 SkyScan query 09:27:34 SkyScan query done: ret=0 az=130.995<-8733 ze=117.375<-4175 Statuses=0008 0009 09:27:34 Msec=750 True Az=130.995 Ze=117.375 Az status=0008 Ze status=0009 09:27:34 Check angles 09:27:34 SkyScan query 09:27:35 SkyScan query done: ret=0 az=130.995<-8733 ze=138.735<-2751 Statuses=0008 0009 09:27:35 Msec=1500 True Az=130.995 Ze=138.735 Az status=0008 Ze status=0009 09:27:35 Check angles 09:27:35 SkyScan query 09:27:36 SkyScan query done: ret=0 az=130.995<-8733 ze=159.69<-1354 Statuses=0008 0009 09:27:36 Msec=2250 True Az=130.995 Ze=159.69 Az status=0008 Ze status=0009 09:27:36 Check angles 09:27:36 SkyScan query 09:27:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-179.34<-23956 Statuses=0008 0009 09:27:36 Msec=3000 True Az=130.995 Ze=-179.34 Az status=0008 Ze status=0009 09:27:36 Check angles 09:27:36 SkyScan query 09:27:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-158.4<-22560 Statuses=0008 0009 09:27:37 Msec=3750 True Az=130.995 Ze=-158.4 Az status=0008 Ze status=0009 09:27:37 Check angles 09:27:37 SkyScan query 09:27:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.42<-21428 Statuses=0008 0009 09:27:38 Msec=4500 True Az=130.995 Ze=-141.42 Az status=0008 Ze status=0009 09:27:38 Check angles 09:27:38 SkyScan query 09:27:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.48<-21432 Statuses=0008 0008 09:27:39 Msec=5250 True Az=130.995 Ze=-141.48 Az status=0008 Ze status=0008 09:27:39 Message to Master queued w/err=0: serial=216961 error=0 09:27:44 Received message from Master: op=Filter serial=216962 09:27:44 Color wheel filter change from 0 to 0 09:27:44 FLIGetFilterPos err=0 currentPosition=0 09:27:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:44 Filter is already there-color wheel unchanged 09:27:44 Received message from Master: op=Shutter serial=216963 09:27:44 Shutter LASER close 09:27:44 Received message from Camera: op=State serial=216965 09:27:44 GetSingleValue result=40 Value=cccccccc 09:27:44 SkyScan query 09:27:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:27:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:44 Parameters OK 09:27:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:44 Set A/D data flow result=40 09:27:44 Set A/D channel type result=40 09:27:44 Set A/D encoding result=40 09:27:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:44 Set channel filter=0.000000e+000 result=40 09:27:44 Config A/D Result=40 09:27:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:44 Get A/D filter: -9.255963e+061 result=40 09:27:44 Get A/D value=-858993460 result=40 09:27:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:44 Parameters OK 09:27:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:44 Set A/D data flow result=40 09:27:44 Set A/D channel type result=40 09:27:44 Set A/D encoding result=40 09:27:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:44 Set channel filter=0.000000e+000 result=40 09:27:44 Config A/D Result=40 09:27:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:44 Get A/D filter: -9.255963e+061 result=40 09:27:44 Get A/D value=-858993460 result=40 09:27:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:44 Aux= 09:27:44 Message to Camera, serial 216965 queued 09:28:21 Received message from Master: op=PointingHead serial=216978 09:28:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:28:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:28:22 Point started: ret=0 09:28:22 point_skyscan result=0 09:28:22 Check angles 09:28:22 SkyScan query 09:28:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 09:28:23 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 09:28:23 Check angles 09:28:23 SkyScan query 09:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:28:24 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:28:24 Message to Master queued w/err=0: serial=216978 error=0 09:28:29 Received message from Master: op=Filter serial=216979 09:28:29 Color wheel filter change from 0 to 0 09:28:29 FLIGetFilterPos err=0 currentPosition=0 09:28:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:29 Filter is already there-color wheel unchanged 09:28:29 Received message from Master: op=Shutter serial=216980 09:28:29 Shutter LASER open 09:28:29 Received message from Camera: op=State serial=216982 09:28:29 GetSingleValue result=40 Value=cccccccc 09:28:29 SkyScan query 09:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:28:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:30 Parameters OK 09:28:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:30 Set A/D data flow result=40 09:28:30 Set A/D channel type result=40 09:28:30 Set A/D encoding result=40 09:28:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:30 Set channel filter=0.000000e+000 result=40 09:28:30 Config A/D Result=40 09:28:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:30 Get A/D filter: -9.255963e+061 result=40 09:28:30 Get A/D value=-858993460 result=40 09:28:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:30 Parameters OK 09:28:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:30 Set A/D data flow result=40 09:28:30 Set A/D channel type result=40 09:28:30 Set A/D encoding result=40 09:28:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:30 Set channel filter=0.000000e+000 result=40 09:28:30 Config A/D Result=40 09:28:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:30 Get A/D filter: -9.255963e+061 result=40 09:28:30 Get A/D value=-858993460 result=40 09:28:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:30 Aux= 09:28:30 Message to Camera, serial 216982 queued 09:28:38 Received message from Master: op=Shutter serial=216992 09:28:38 Shutter LASER close 09:28:39 Received message from Master: op=PointingHead serial=216996 09:28:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:28:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:28:39 Point started: ret=0 09:28:39 point_skyscan result=0 09:28:40 Check angles 09:28:40 SkyScan query 09:28:40 SkyScan query done: ret=0 az=135.87<-9058 ze=-143.31<-21554 Statuses=0009 0009 09:28:40 Msec=0 True Az=135.87 Ze=-143.31 Az status=0009 Ze status=0009 09:28:40 Check angles 09:28:40 SkyScan query 09:28:41 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.875<-20125 Statuses=0009 0009 09:28:41 Msec=750 True Az=153.75 Ze=-121.875 Az status=0009 Ze status=0009 09:28:41 Check angles 09:28:41 SkyScan query 09:28:42 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.95<-18730 Statuses=0009 0009 09:28:42 Msec=1500 True Az=171.24 Ze=-100.95 Az status=0009 Ze status=0009 09:28:42 Check angles 09:28:42 SkyScan query 09:28:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.04<-17336 Statuses=0008 0009 09:28:42 Msec=2250 True Az=175.995 Ze=-80.04 Az status=0008 Ze status=0009 09:28:43 Check angles 09:28:43 SkyScan query 09:28:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.07<-15938 Statuses=0008 0009 09:28:43 Msec=3000 True Az=175.995 Ze=-59.07 Az status=0008 Ze status=0009 09:28:43 Check angles 09:28:43 SkyScan query 09:28:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:28:44 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:28:44 Message to Master queued w/err=0: serial=216996 error=0 09:28:49 Received message from Master: op=Filter serial=216997 09:28:49 Color wheel filter change from 0 to 0 09:28:49 FLIGetFilterPos err=0 currentPosition=0 09:28:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:49 Filter is already there-color wheel unchanged 09:28:49 Received message from Master: op=Shutter serial=216998 09:28:49 Shutter LASER close 09:28:49 Received message from Camera: op=State serial=217000 09:28:49 GetSingleValue result=40 Value=cccccccc 09:28:49 SkyScan query 09:28:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:28:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:50 Parameters OK 09:28:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:50 Set A/D data flow result=40 09:28:50 Set A/D channel type result=40 09:28:50 Set A/D encoding result=40 09:28:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:50 Set channel filter=0.000000e+000 result=40 09:28:50 Config A/D Result=40 09:28:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:50 Get A/D filter: -9.255963e+061 result=40 09:28:50 Get A/D value=-858993460 result=40 09:28:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:50 Parameters OK 09:28:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:50 Set A/D data flow result=40 09:28:50 Set A/D channel type result=40 09:28:50 Set A/D encoding result=40 09:28:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:50 Set channel filter=0.000000e+000 result=40 09:28:50 Config A/D Result=40 09:28:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:50 Get A/D filter: -9.255963e+061 result=40 09:28:50 Get A/D value=-858993460 result=40 09:28:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:50 Aux= 09:28:50 Message to Camera, serial 217000 queued 09:29:27 Received message from Master: op=PointingHead serial=217013 09:29:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:29:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:29:27 Point started: ret=0 09:29:27 point_skyscan result=0 09:29:28 Check angles 09:29:28 SkyScan query 09:29:28 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.225<-13415 Statuses=0009 0009 09:29:28 Msec=0 True Az=152.565 Ze=-21.225 Az status=0009 Ze status=0009 09:29:29 Check angles 09:29:29 SkyScan query 09:29:29 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.255<-12017 Statuses=0009 0009 09:29:29 Msec=750 True Az=135.12 Ze=-0.255 Az status=0009 Ze status=0009 09:29:29 Check angles 09:29:29 SkyScan query 09:29:30 SkyScan query done: ret=0 az=117.555<-7837 ze=20.67<-10622 Statuses=0009 0009 09:29:30 Msec=1500 True Az=117.555 Ze=20.67 Az status=0009 Ze status=0009 09:29:30 Check angles 09:29:30 SkyScan query 09:29:31 SkyScan query done: ret=0 az=100.2<-6680 ze=41.655<-9223 Statuses=0009 0009 09:29:31 Msec=2250 True Az=100.2 Ze=41.655 Az status=0009 Ze status=0009 09:29:31 Check angles 09:29:31 SkyScan query 09:29:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.585<-8561 Statuses=0009 0008 09:29:31 Msec=3000 True Az=86.01 Ze=51.585 Az status=0009 Ze status=0008 09:29:32 Check angles 09:29:32 SkyScan query 09:29:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:29:32 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 09:29:32 Message to Master queued w/err=0: serial=217013 error=0 09:29:37 Received message from Master: op=Filter serial=217014 09:29:37 Color wheel filter change from 0 to 0 09:29:37 FLIGetFilterPos err=0 currentPosition=0 09:29:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:37 Filter is already there-color wheel unchanged 09:29:37 Received message from Master: op=Shutter serial=217015 09:29:37 Shutter LASER close 09:29:37 Received message from Camera: op=State serial=217017 09:29:37 GetSingleValue result=40 Value=cccccccc 09:29:37 SkyScan query 09:29:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:29:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:38 Parameters OK 09:29:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:38 Set A/D data flow result=40 09:29:38 Set A/D channel type result=40 09:29:38 Set A/D encoding result=40 09:29:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:38 Set channel filter=0.000000e+000 result=40 09:29:38 Config A/D Result=40 09:29:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:38 Get A/D filter: -9.255963e+061 result=40 09:29:38 Get A/D value=-858993460 result=40 09:29:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:38 Parameters OK 09:29:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:38 Set A/D data flow result=40 09:29:38 Set A/D channel type result=40 09:29:38 Set A/D encoding result=40 09:29:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:38 Set channel filter=0.000000e+000 result=40 09:29:38 Config A/D Result=40 09:29:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:38 Get A/D filter: -9.255963e+061 result=40 09:29:38 Get A/D value=-858993460 result=40 09:29:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:38 Aux= 09:29:38 Message to Camera, serial 217017 queued 09:30:14 Received message from Master: op=PointingHead serial=217029 09:30:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:30:14 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:30:14 Point started: ret=0 09:30:14 point_skyscan result=0 09:30:15 Check angles 09:30:15 SkyScan query 09:30:16 SkyScan query done: ret=0 az=108.93<-7262 ze=38.475<-9435 Statuses=0009 0008 09:30:16 Msec=0 True Az=108.93 Ze=38.475 Az status=0009 Ze status=0008 09:30:16 Check angles 09:30:16 SkyScan query 09:30:16 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 09:30:16 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 09:30:17 Check angles 09:30:17 SkyScan query 09:30:17 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 09:30:17 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 09:30:17 Check angles 09:30:17 SkyScan query 09:30:18 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 09:30:18 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 09:30:18 Check angles 09:30:18 SkyScan query 09:30:19 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:30:19 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:30:19 Check angles 09:30:19 SkyScan query 09:30:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:30:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:30:19 Message to Master queued w/err=0: serial=217029 error=0 09:30:24 Received message from Master: op=Filter serial=217030 09:30:24 Color wheel filter change from 0 to 0 09:30:24 FLIGetFilterPos err=0 currentPosition=0 09:30:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:24 Filter is already there-color wheel unchanged 09:30:25 Received message from Master: op=Shutter serial=217031 09:30:25 Shutter LASER close 09:30:25 Received message from Camera: op=State serial=217033 09:30:25 GetSingleValue result=40 Value=cccccccc 09:30:25 SkyScan query 09:30:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:30:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:25 Parameters OK 09:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:25 Set A/D data flow result=40 09:30:25 Set A/D channel type result=40 09:30:25 Set A/D encoding result=40 09:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:25 Set channel filter=0.000000e+000 result=40 09:30:25 Config A/D Result=40 09:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:25 Get A/D filter: -9.255963e+061 result=40 09:30:25 Get A/D value=-858993460 result=40 09:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:25 Parameters OK 09:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:25 Set A/D data flow result=40 09:30:25 Set A/D channel type result=40 09:30:25 Set A/D encoding result=40 09:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:25 Set channel filter=0.000000e+000 result=40 09:30:25 Config A/D Result=40 09:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:25 Get A/D filter: -9.255963e+061 result=40 09:30:25 Get A/D value=-858993460 result=40 09:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:25 Aux= 09:30:25 Message to Camera, serial 217033 queued 09:31:02 Received message from Master: op=PointingHead serial=217046 09:31:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:31:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:31:02 Point started: ret=0 09:31:02 point_skyscan result=0 09:31:03 Check angles 09:31:03 SkyScan query 09:31:04 SkyScan query done: ret=0 az=153.15<-10210 ze=8.94<-11404 Statuses=0009 0009 09:31:04 Msec=0 True Az=153.15 Ze=8.94 Az status=0009 Ze status=0009 09:31:04 Check angles 09:31:04 SkyScan query 09:31:04 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.045<-12803 Statuses=0009 0009 09:31:04 Msec=750 True Az=135.735 Ze=-12.045 Az status=0009 Ze status=0009 09:31:05 Check angles 09:31:05 SkyScan query 09:31:05 SkyScan query done: ret=0 az=118.185<-7879 ze=-32.97<-14198 Statuses=0009 0009 09:31:05 Msec=1500 True Az=118.185 Ze=-32.97 Az status=0009 Ze status=0009 09:31:05 Check angles 09:31:05 SkyScan query 09:31:06 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.54<-15436 Statuses=0009 0009 09:31:06 Msec=2250 True Az=100.47 Ze=-51.54 Az status=0009 Ze status=0009 09:31:06 Check angles 09:31:06 SkyScan query 09:31:07 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 09:31:07 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 09:31:07 Check angles 09:31:07 SkyScan query 09:31:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:31:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:31:07 Message to Master queued w/err=0: serial=217046 error=0 09:31:12 Received message from Master: op=Filter serial=217047 09:31:12 Color wheel filter change from 0 to 0 09:31:12 FLIGetFilterPos err=0 currentPosition=0 09:31:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:12 Filter is already there-color wheel unchanged 09:31:13 Received message from Master: op=Shutter serial=217048 09:31:13 Shutter LASER close 09:31:13 Received message from Camera: op=State serial=217050 09:31:13 GetSingleValue result=40 Value=cccccccc 09:31:13 SkyScan query 09:31:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:31:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:13 Parameters OK 09:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:13 Set A/D data flow result=40 09:31:13 Set A/D channel type result=40 09:31:13 Set A/D encoding result=40 09:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:13 Set channel filter=0.000000e+000 result=40 09:31:13 Config A/D Result=40 09:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:13 Get A/D filter: -9.255963e+061 result=40 09:31:13 Get A/D value=-858993460 result=40 09:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:13 Parameters OK 09:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:13 Set A/D data flow result=40 09:31:13 Set A/D channel type result=40 09:31:13 Set A/D encoding result=40 09:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:13 Set channel filter=0.000000e+000 result=40 09:31:13 Config A/D Result=40 09:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:13 Get A/D filter: -9.255963e+061 result=40 09:31:13 Get A/D value=-858993460 result=40 09:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:13 Aux= 09:31:13 Message to Camera, serial 217050 queued 09:31:50 Received message from Master: op=PointingHead serial=217063 09:31:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:31:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:31:50 Point started: ret=0 09:31:50 point_skyscan result=0 09:31:51 Check angles 09:31:51 SkyScan query 09:31:52 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.21<-17414 Statuses=0009 0009 09:31:52 Msec=0 True Az=108.87 Ze=-81.21 Az status=0009 Ze status=0009 09:31:52 Check angles 09:31:52 SkyScan query 09:31:52 SkyScan query done: ret=0 az=112.98<-7532 ze=-102.585<-18839 Statuses=0008 0009 09:31:52 Msec=750 True Az=112.98 Ze=-102.585 Az status=0008 Ze status=0009 09:31:53 Check angles 09:31:53 SkyScan query 09:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.99<-20266 Statuses=0008 0009 09:31:53 Msec=1500 True Az=112.995 Ze=-123.99 Az status=0008 Ze status=0009 09:31:53 Check angles 09:31:53 SkyScan query 09:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.915<-21661 Statuses=0008 0009 09:31:54 Msec=2250 True Az=112.995 Ze=-144.915 Az status=0008 Ze status=0009 09:31:54 Check angles 09:31:54 SkyScan query 09:31:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.87<-23058 Statuses=0008 0009 09:31:55 Msec=3000 True Az=112.995 Ze=-165.87 Az status=0008 Ze status=0009 09:31:55 Check angles 09:31:55 SkyScan query 09:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:31:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:31:56 Message to Master queued w/err=0: serial=217063 error=0 09:32:01 Received message from Master: op=Filter serial=217064 09:32:01 Color wheel filter change from 0 to 0 09:32:01 FLIGetFilterPos err=0 currentPosition=0 09:32:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:01 Filter is already there-color wheel unchanged 09:32:01 Received message from Master: op=Shutter serial=217065 09:32:01 Shutter LASER open 09:32:01 Received message from Camera: op=State serial=217067 09:32:01 GetSingleValue result=40 Value=cccccccc 09:32:01 SkyScan query 09:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:32:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:01 Parameters OK 09:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:01 Set A/D data flow result=40 09:32:01 Set A/D channel type result=40 09:32:01 Set A/D encoding result=40 09:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:01 Set channel filter=0.000000e+000 result=40 09:32:01 Config A/D Result=40 09:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:01 Get A/D filter: -9.255963e+061 result=40 09:32:01 Get A/D value=-858993460 result=40 09:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:01 Parameters OK 09:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:01 Set A/D data flow result=40 09:32:01 Set A/D channel type result=40 09:32:01 Set A/D encoding result=40 09:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:01 Set channel filter=0.000000e+000 result=40 09:32:01 Config A/D Result=40 09:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:01 Get A/D filter: -9.255963e+061 result=40 09:32:01 Get A/D value=-858993460 result=40 09:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:01 Aux= 09:32:01 Message to Camera, serial 217067 queued 09:32:10 Received message from Master: op=Shutter serial=217077 09:32:10 Shutter LASER close 09:32:10 Received message from Master: op=PointingHead serial=217081 09:32:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:32:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:32:11 Point started: ret=0 09:32:11 point_skyscan result=0 09:32:11 Check angles 09:32:11 SkyScan query 09:32:12 SkyScan query done: ret=0 az=89.88<-5992 ze=157.23<-1518 Statuses=0009 0009 09:32:12 Msec=0 True Az=89.88 Ze=157.23 Az status=0009 Ze status=0009 09:32:12 Check angles 09:32:12 SkyScan query 09:32:13 SkyScan query done: ret=0 az=72.45<-4830 ze=136.275<-2915 Statuses=0009 0009 09:32:13 Msec=750 True Az=72.45 Ze=136.275 Az status=0009 Ze status=0009 09:32:13 Check angles 09:32:13 SkyScan query 09:32:13 SkyScan query done: ret=0 az=54.72<-3648 ze=114.87<-4342 Statuses=0009 0009 09:32:13 Msec=1500 True Az=54.72 Ze=114.87 Az status=0009 Ze status=0009 09:32:14 Check angles 09:32:14 SkyScan query 09:32:14 SkyScan query done: ret=0 az=40.965<-2731 ze=93.945<-5737 Statuses=0009 0009 09:32:14 Msec=2250 True Az=40.965 Ze=93.945 Az status=0009 Ze status=0009 09:32:14 Check angles 09:32:14 SkyScan query 09:32:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.945<-7137 Statuses=0008 0009 09:32:15 Msec=3000 True Az=40.995 Ze=72.945 Az status=0008 Ze status=0009 09:32:15 Check angles 09:32:15 SkyScan query 09:32:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 09:32:16 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 09:32:16 Check angles 09:32:16 SkyScan query 09:32:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:32:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:32:17 Message to Master queued w/err=0: serial=217081 error=0 09:32:22 Received message from Master: op=Filter serial=217082 09:32:22 Color wheel filter change from 0 to 0 09:32:22 FLIGetFilterPos err=0 currentPosition=0 09:32:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:22 Filter is already there-color wheel unchanged 09:32:22 Received message from Master: op=Shutter serial=217083 09:32:22 Shutter LASER close 09:32:22 Received message from Camera: op=State serial=217085 09:32:22 GetSingleValue result=40 Value=cccccccc 09:32:22 SkyScan query 09:32:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:32:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:22 Parameters OK 09:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:22 Set A/D data flow result=40 09:32:22 Set A/D channel type result=40 09:32:22 Set A/D encoding result=40 09:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:22 Set channel filter=0.000000e+000 result=40 09:32:22 Config A/D Result=40 09:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:22 Get A/D filter: -9.255963e+061 result=40 09:32:22 Get A/D value=-858993460 result=40 09:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:22 Parameters OK 09:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:22 Set A/D data flow result=40 09:32:22 Set A/D channel type result=40 09:32:22 Set A/D encoding result=40 09:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:22 Set channel filter=0.000000e+000 result=40 09:32:22 Config A/D Result=40 09:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:22 Get A/D filter: -9.255963e+061 result=40 09:32:22 Get A/D value=-858993460 result=40 09:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:22 Aux= 09:32:22 Message to Camera, serial 217085 queued 09:32:59 Received message from Master: op=PointingHead serial=217098 09:32:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:32:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:33:00 Point started: ret=0 09:33:00 point_skyscan result=0 09:33:00 Check angles 09:33:00 SkyScan query 09:33:01 SkyScan query done: ret=0 az=64.38<-4292 ze=66.51<-7566 Statuses=0009 0008 09:33:01 Msec=0 True Az=64.38 Ze=66.51 Az status=0009 Ze status=0008 09:33:01 Check angles 09:33:01 SkyScan query 09:33:02 SkyScan query done: ret=0 az=81.855<-5457 ze=66.495<-7567 Statuses=0009 0008 09:33:02 Msec=750 True Az=81.855 Ze=66.495 Az status=0009 Ze status=0008 09:33:02 Check angles 09:33:02 SkyScan query 09:33:02 SkyScan query done: ret=0 az=99.795<-6653 ze=66.495<-7567 Statuses=0009 0008 09:33:02 Msec=1500 True Az=99.795 Ze=66.495 Az status=0009 Ze status=0008 09:33:03 Check angles 09:33:03 SkyScan query 09:33:03 SkyScan query done: ret=0 az=117.285<-7819 ze=66.495<-7567 Statuses=0009 0008 09:33:03 Msec=2250 True Az=117.285 Ze=66.495 Az status=0009 Ze status=0008 09:33:03 Check angles 09:33:03 SkyScan query 09:33:04 SkyScan query done: ret=0 az=134.685<-8979 ze=66.495<-7567 Statuses=0009 0008 09:33:04 Msec=3000 True Az=134.685 Ze=66.495 Az status=0009 Ze status=0008 09:33:04 Check angles 09:33:04 SkyScan query 09:33:05 SkyScan query done: ret=0 az=152.025<-10135 ze=66.495<-7567 Statuses=0009 0008 09:33:05 Msec=3750 True Az=152.025 Ze=66.495 Az status=0009 Ze status=0008 09:33:05 Check angles 09:33:05 SkyScan query 09:33:05 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:33:05 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:33:05 Message to Master queued w/err=0: serial=217098 error=0 09:33:10 Received message from Master: op=Filter serial=217099 09:33:10 Color wheel filter change from 0 to 0 09:33:10 FLIGetFilterPos err=0 currentPosition=0 09:33:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:10 Filter is already there-color wheel unchanged 09:33:11 Received message from Master: op=Shutter serial=217100 09:33:11 Shutter LASER close 09:33:11 Received message from Camera: op=State serial=217102 09:33:11 GetSingleValue result=40 Value=cccccccc 09:33:11 SkyScan query 09:33:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:33:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:11 Parameters OK 09:33:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:11 Set A/D data flow result=40 09:33:11 Set A/D channel type result=40 09:33:11 Set A/D encoding result=40 09:33:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:11 Set channel filter=0.000000e+000 result=40 09:33:11 Config A/D Result=40 09:33:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:11 Get A/D filter: -9.255963e+061 result=40 09:33:11 Get A/D value=-858993460 result=40 09:33:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:11 Parameters OK 09:33:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:11 Set A/D data flow result=40 09:33:11 Set A/D channel type result=40 09:33:11 Set A/D encoding result=40 09:33:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:11 Set channel filter=0.000000e+000 result=40 09:33:11 Config A/D Result=40 09:33:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:11 Get A/D filter: -9.255963e+061 result=40 09:33:11 Get A/D value=-858993460 result=40 09:33:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:11 Aux= 09:33:11 Message to Camera, serial 217102 queued 09:33:48 Received message from Master: op=PointingHead serial=217115 09:33:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:33:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:33:48 Point started: ret=0 09:33:48 point_skyscan result=0 09:33:49 Check angles 09:33:49 SkyScan query 09:33:50 SkyScan query done: ret=0 az=134.76<-8984 ze=36.48<-9568 Statuses=0009 0009 09:33:50 Msec=0 True Az=134.76 Ze=36.48 Az status=0009 Ze status=0009 09:33:50 Check angles 09:33:50 SkyScan query 09:33:51 SkyScan query done: ret=0 az=117.24<-7816 ze=15.54<-10964 Statuses=0009 0009 09:33:51 Msec=750 True Az=117.24 Ze=15.54 Az status=0009 Ze status=0009 09:33:51 Check angles 09:33:51 SkyScan query 09:33:51 SkyScan query done: ret=0 az=99.555<-6637 ze=-5.91<-12394 Statuses=0009 0009 09:33:51 Msec=1500 True Az=99.555 Ze=-5.91 Az status=0009 Ze status=0009 09:33:51 Check angles 09:33:51 SkyScan query 09:33:52 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.91<-13794 Statuses=0009 0009 09:33:52 Msec=2250 True Az=82.035 Ze=-26.91 Az status=0009 Ze status=0009 09:33:52 Check angles 09:33:52 SkyScan query 09:33:53 SkyScan query done: ret=0 az=64.455<-4297 ze=-38.58<-14572 Statuses=0009 0008 09:33:53 Msec=3000 True Az=64.455 Ze=-38.58 Az status=0009 Ze status=0008 09:33:53 Check angles 09:33:53 SkyScan query 09:33:54 SkyScan query done: ret=0 az=46.875<-3125 ze=-38.52<-14568 Statuses=0009 0008 09:33:54 Msec=3750 True Az=46.875 Ze=-38.52 Az status=0009 Ze status=0008 09:33:54 Check angles 09:33:54 SkyScan query 09:33:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:33:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:33:54 Message to Master queued w/err=0: serial=217115 error=0 09:33:59 Received message from Master: op=Filter serial=217116 09:33:59 Color wheel filter change from 0 to 0 09:33:59 FLIGetFilterPos err=0 currentPosition=0 09:33:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:59 Filter is already there-color wheel unchanged 09:33:59 Received message from Master: op=Shutter serial=217117 09:33:59 Shutter LASER close 09:34:00 Received message from Camera: op=State serial=217119 09:34:00 GetSingleValue result=40 Value=cccccccc 09:34:00 SkyScan query 09:34:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:34:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:00 Parameters OK 09:34:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:00 Set A/D data flow result=40 09:34:00 Set A/D channel type result=40 09:34:00 Set A/D encoding result=40 09:34:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:00 Set channel filter=0.000000e+000 result=40 09:34:00 Config A/D Result=40 09:34:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:00 Get A/D filter: -9.255963e+061 result=40 09:34:00 Get A/D value=-858993460 result=40 09:34:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:00 Parameters OK 09:34:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:00 Set A/D data flow result=40 09:34:00 Set A/D channel type result=40 09:34:00 Set A/D encoding result=40 09:34:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:00 Set channel filter=0.000000e+000 result=40 09:34:00 Config A/D Result=40 09:34:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:00 Get A/D filter: -9.255963e+061 result=40 09:34:00 Get A/D value=-858993460 result=40 09:34:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:00 Aux= 09:34:00 Message to Camera, serial 217119 queued 09:34:37 Received message from Master: op=PointingHead serial=217132 09:34:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:34:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:34:37 Point started: ret=0 09:34:37 point_skyscan result=0 09:34:38 Check angles 09:34:38 SkyScan query 09:34:39 SkyScan query done: ret=0 az=63.795<-4253 ze=-67.98<-16532 Statuses=0009 0009 09:34:39 Msec=0 True Az=63.795 Ze=-67.98 Az status=0009 Ze status=0009 09:34:39 Check angles 09:34:39 SkyScan query 09:34:39 SkyScan query done: ret=0 az=81.18<-5412 ze=-88.965<-17931 Statuses=0009 0009 09:34:39 Msec=750 True Az=81.18 Ze=-88.965 Az status=0009 Ze status=0009 09:34:40 Check angles 09:34:40 SkyScan query 09:34:40 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.385<-19359 Statuses=0009 0009 09:34:40 Msec=1500 True Az=99.06 Ze=-110.385 Az status=0009 Ze status=0009 09:34:40 Check angles 09:34:40 SkyScan query 09:34:41 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.295<-20753 Statuses=0009 0009 09:34:41 Msec=2250 True Az=116.55 Ze=-131.295 Az status=0009 Ze status=0009 09:34:41 Check angles 09:34:41 SkyScan query 09:34:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 09:34:42 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 09:34:42 Check angles 09:34:42 SkyScan query 09:34:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:34:42 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:34:42 Message to Master queued w/err=0: serial=217132 error=0 09:34:47 Received message from Master: op=Filter serial=217133 09:34:47 Color wheel filter change from 0 to 0 09:34:47 FLIGetFilterPos err=0 currentPosition=0 09:34:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:47 Filter is already there-color wheel unchanged 09:34:48 Received message from Master: op=Shutter serial=217134 09:34:48 Shutter LASER close 09:34:48 Received message from Camera: op=State serial=217136 09:34:48 GetSingleValue result=40 Value=cccccccc 09:34:48 SkyScan query 09:34:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:34:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:48 Parameters OK 09:34:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:48 Set A/D data flow result=40 09:34:48 Set A/D channel type result=40 09:34:48 Set A/D encoding result=40 09:34:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:48 Set channel filter=0.000000e+000 result=40 09:34:48 Config A/D Result=40 09:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:48 Get A/D filter: -9.255963e+061 result=40 09:34:48 Get A/D value=-858993460 result=40 09:34:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:48 Parameters OK 09:34:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:48 Set A/D data flow result=40 09:34:48 Set A/D channel type result=40 09:34:48 Set A/D encoding result=40 09:34:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:48 Set channel filter=0.000000e+000 result=40 09:34:48 Config A/D Result=40 09:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:48 Get A/D filter: -9.255963e+061 result=40 09:34:48 Get A/D value=-858993460 result=40 09:34:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:48 Aux= 09:34:48 Message to Camera, serial 217136 queued 09:35:24 Received message from Master: op=PointingHead serial=217148 09:35:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:35:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:35:25 Point started: ret=0 09:35:25 point_skyscan result=0 09:35:25 Check angles 09:35:25 SkyScan query 09:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0009 0009 09:35:26 Msec=0 True Az=112.995 Ze=-171.345 Az status=0009 Ze status=0009 09:35:26 Check angles 09:35:26 SkyScan query 09:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:35:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:35:27 Message to Master queued w/err=0: serial=217148 error=0 09:35:32 Received message from Master: op=Filter serial=217149 09:35:32 Color wheel filter change from 0 to 0 [UTC 2018-12-17 09:35:32] 09:35:32 FLIGetFilterPos err=0 currentPosition=0 09:35:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:32 Filter is already there-color wheel unchanged 09:35:32 Received message from Master: op=Shutter serial=217150 09:35:32 Shutter LASER open 09:35:32 Received message from Camera: op=State serial=217152 09:35:32 GetSingleValue result=40 Value=cccccccc 09:35:32 SkyScan query 09:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:35:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:33 Parameters OK 09:35:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:33 Set A/D data flow result=40 09:35:33 Set A/D channel type result=40 09:35:33 Set A/D encoding result=40 09:35:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:33 Set channel filter=0.000000e+000 result=40 09:35:33 Config A/D Result=40 09:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:33 Get A/D filter: -9.255963e+061 result=40 09:35:33 Get A/D value=-858993460 result=40 09:35:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:33 Parameters OK 09:35:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:33 Set A/D data flow result=40 09:35:33 Set A/D channel type result=40 09:35:33 Set A/D encoding result=40 09:35:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:33 Set channel filter=0.000000e+000 result=40 09:35:33 Config A/D Result=40 09:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:33 Get A/D filter: -9.255963e+061 result=40 09:35:33 Get A/D value=-858993460 result=40 09:35:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:33 Aux= 09:35:33 Message to Camera, serial 217152 queued 09:35:41 Received message from Master: op=Shutter serial=217162 09:35:41 Shutter LASER close 09:35:42 Received message from Master: op=PointingHead serial=217166 09:35:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:35:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:35:42 Point started: ret=0 09:35:42 point_skyscan result=0 09:35:43 Check angles 09:35:43 SkyScan query 09:35:43 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.145<-21543 Statuses=0009 0009 09:35:43 Msec=0 True Az=136.155 Ze=-143.145 Az status=0009 Ze status=0009 09:35:43 Check angles 09:35:43 SkyScan query 09:35:44 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.175<-20145 Statuses=0009 0009 09:35:44 Msec=750 True Az=153.6 Ze=-122.175 Az status=0009 Ze status=0009 09:35:44 Check angles 09:35:44 SkyScan query 09:35:45 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.725<-18715 Statuses=0009 0009 09:35:45 Msec=1500 True Az=171.495 Ze=-100.725 Az status=0009 Ze status=0009 09:35:45 Check angles 09:35:45 SkyScan query 09:35:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.875<-17325 Statuses=0008 0009 09:35:46 Msec=2250 True Az=175.995 Ze=-79.875 Az status=0008 Ze status=0009 09:35:46 Check angles 09:35:46 SkyScan query 09:35:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.875<-15925 Statuses=0008 0009 09:35:46 Msec=3000 True Az=175.995 Ze=-58.875 Az status=0008 Ze status=0009 09:35:46 Check angles 09:35:46 SkyScan query 09:35:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 09:35:47 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 09:35:47 Message to Master queued w/err=0: serial=217166 error=0 09:35:52 Received message from Master: op=Filter serial=217167 09:35:52 Color wheel filter change from 0 to 0 09:35:52 FLIGetFilterPos err=0 currentPosition=0 09:35:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:52 Filter is already there-color wheel unchanged 09:35:52 Received message from Master: op=Shutter serial=217168 09:35:52 Shutter LASER close [UTC 2018-12-17 09:35:52] 09:35:52 Received message from Camera: op=State serial=217170 09:35:52 GetSingleValue result=40 Value=cccccccc 09:35:52 SkyScan query 09:35:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:35:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:53 Parameters OK 09:35:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:53 Set A/D data flow result=40 09:35:53 Set A/D channel type result=40 09:35:53 Set A/D encoding result=40 09:35:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:53 Set channel filter=0.000000e+000 result=40 09:35:53 Config A/D Result=40 09:35:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:53 Get A/D filter: -9.255963e+061 result=40 09:35:53 Get A/D value=-858993460 result=40 09:35:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:53 Parameters OK 09:35:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:53 Set A/D data flow result=40 09:35:53 Set A/D channel type result=40 09:35:53 Set A/D encoding result=40 09:35:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:53 Set channel filter=0.000000e+000 result=40 09:35:53 Config A/D Result=40 09:35:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:53 Get A/D filter: -9.255963e+061 result=40 09:35:53 Get A/D value=-858993460 result=40 09:35:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:53 Aux= 09:35:53 Message to Camera, serial 217170 queued 09:36:30 Received message from Master: op=PointingHead serial=217183 09:36:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:36:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:36:30 Point started: ret=0 09:36:30 point_skyscan result=0 09:36:31 Check angles 09:36:31 SkyScan query 09:36:31 SkyScan query done: ret=0 az=153.15<-10210 ze=-21.96<-13464 Statuses=0009 0009 09:36:31 Msec=0 True Az=153.15 Ze=-21.96 Az status=0009 Ze status=0009 09:36:32 Check angles 09:36:32 SkyScan query 09:36:32 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.915<-12061 Statuses=0009 0009 09:36:32 Msec=750 True Az=135.735 Ze=-0.915 Az status=0009 Ze status=0009 09:36:32 Check angles 09:36:32 SkyScan query 09:36:33 SkyScan query done: ret=0 az=118.17<-7878 ze=19.98<-10668 Statuses=0009 0009 09:36:33 Msec=1500 True Az=118.17 Ze=19.98 Az status=0009 Ze status=0009 09:36:33 Check angles 09:36:33 SkyScan query 09:36:34 SkyScan query done: ret=0 az=100.83<-6722 ze=40.995<-9267 Statuses=0009 0009 09:36:34 Msec=2250 True Az=100.83 Ze=40.995 Az status=0009 Ze status=0009 09:36:34 Check angles 09:36:34 SkyScan query 09:36:34 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 09:36:34 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 09:36:35 Check angles 09:36:35 SkyScan query 09:36:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:36:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:36:35 Message to Master queued w/err=0: serial=217183 error=0 09:36:40 Received message from Master: op=Filter serial=217184 09:36:40 Color wheel filter change from 0 to 0 09:36:40 FLIGetFilterPos err=0 currentPosition=0 09:36:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:40 Filter is already there-color wheel unchanged 09:36:40 Received message from Master: op=Shutter serial=217185 09:36:40 Shutter LASER close 09:36:40 Received message from Camera: op=State serial=217187 09:36:40 GetSingleValue result=40 Value=cccccccc 09:36:40 SkyScan query 09:36:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:36:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:41 Parameters OK 09:36:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:41 Set A/D data flow result=40 09:36:41 Set A/D channel type result=40 09:36:41 Set A/D encoding result=40 09:36:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:41 Set channel filter=0.000000e+000 result=40 09:36:41 Config A/D Result=40 09:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:41 Get A/D filter: -9.255963e+061 result=40 09:36:41 Get A/D value=-858993460 result=40 09:36:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:41 Parameters OK 09:36:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:41 Set A/D data flow result=40 09:36:41 Set A/D channel type result=40 09:36:41 Set A/D encoding result=40 09:36:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:41 Set channel filter=0.000000e+000 result=40 09:36:41 Config A/D Result=40 09:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:41 Get A/D filter: -9.255963e+061 result=40 09:36:41 Get A/D value=-858993460 result=40 09:36:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:41 Aux= 09:36:41 Message to Camera, serial 217187 queued 09:37:18 Received message from Master: op=PointingHead serial=217200 09:37:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:37:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:37:18 Point started: ret=0 09:37:18 point_skyscan result=0 09:37:19 Check angles 09:37:19 SkyScan query 09:37:20 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 09:37:20 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 09:37:20 Check angles 09:37:20 SkyScan query 09:37:20 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 09:37:20 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 09:37:20 Check angles 09:37:20 SkyScan query 09:37:21 SkyScan query done: ret=0 az=144.72<-9648 ze=38.505<-9433 Statuses=0009 0008 09:37:21 Msec=1500 True Az=144.72 Ze=38.505 Az status=0009 Ze status=0008 09:37:21 Check angles 09:37:21 SkyScan query 09:37:22 SkyScan query done: ret=0 az=162.21<-10814 ze=38.505<-9433 Statuses=0009 0008 09:37:22 Msec=2250 True Az=162.21 Ze=38.505 Az status=0009 Ze status=0008 09:37:22 Check angles 09:37:22 SkyScan query 09:37:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:37:23 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:37:23 Check angles 09:37:23 SkyScan query 09:37:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:37:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:37:23 Message to Master queued w/err=0: serial=217200 error=0 09:37:28 Received message from Master: op=Filter serial=217201 09:37:28 Color wheel filter change from 0 to 0 09:37:28 FLIGetFilterPos err=0 currentPosition=0 09:37:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:28 Filter is already there-color wheel unchanged 09:37:28 Received message from Master: op=Shutter serial=217202 09:37:28 Shutter LASER close 09:37:29 Received message from Camera: op=State serial=217204 09:37:29 GetSingleValue result=40 Value=cccccccc 09:37:29 SkyScan query 09:37:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:37:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:29 Parameters OK 09:37:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:29 Set A/D data flow result=40 09:37:29 Set A/D channel type result=40 09:37:29 Set A/D encoding result=40 09:37:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:29 Set channel filter=0.000000e+000 result=40 09:37:29 Config A/D Result=40 09:37:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:29 Get A/D filter: -9.255963e+061 result=40 09:37:29 Get A/D value=-858993460 result=40 09:37:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:29 Parameters OK 09:37:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:29 Set A/D data flow result=40 09:37:29 Set A/D channel type result=40 09:37:29 Set A/D encoding result=40 09:37:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:29 Set channel filter=0.000000e+000 result=40 09:37:29 Config A/D Result=40 09:37:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:29 Get A/D filter: -9.255963e+061 result=40 09:37:29 Get A/D value=-858993460 result=40 09:37:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:29 Aux= 09:37:29 Message to Camera, serial 217204 queued 09:38:06 Received message from Master: op=PointingHead serial=217217 09:38:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:38:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:38:06 Point started: ret=0 09:38:06 point_skyscan result=0 09:38:07 Check angles 09:38:07 SkyScan query 09:38:08 SkyScan query done: ret=0 az=152.955<-10197 ze=8.73<-11418 Statuses=0009 0009 09:38:08 Msec=0 True Az=152.955 Ze=8.73 Az status=0009 Ze status=0009 09:38:08 Check angles 09:38:08 SkyScan query 09:38:08 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.195<-12813 Statuses=0009 0009 09:38:08 Msec=750 True Az=135.435 Ze=-12.195 Az status=0009 Ze status=0009 09:38:09 Check angles 09:38:09 SkyScan query 09:38:09 SkyScan query done: ret=0 az=117.99<-7866 ze=-33.18<-14212 Statuses=0009 0009 09:38:09 Msec=1500 True Az=117.99 Ze=-33.18 Az status=0009 Ze status=0009 09:38:09 Check angles 09:38:09 SkyScan query 09:38:10 SkyScan query done: ret=0 az=100.695<-6713 ze=-51.525<-15435 Statuses=0009 0009 09:38:10 Msec=2250 True Az=100.695 Ze=-51.525 Az status=0009 Ze status=0009 09:38:10 Check angles 09:38:10 SkyScan query 09:38:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 09:38:11 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 09:38:11 Check angles 09:38:11 SkyScan query 09:38:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:38:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:38:11 Message to Master queued w/err=0: serial=217217 error=0 09:38:16 Received message from Master: op=Filter serial=217218 09:38:16 Color wheel filter change from 0 to 0 09:38:16 FLIGetFilterPos err=0 currentPosition=0 09:38:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:16 Filter is already there-color wheel unchanged 09:38:17 Received message from Master: op=Shutter serial=217219 09:38:17 Shutter LASER close 09:38:17 Received message from Camera: op=State serial=217221 09:38:17 GetSingleValue result=40 Value=cccccccc 09:38:17 SkyScan query 09:38:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:38:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:17 Parameters OK 09:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:17 Set A/D data flow result=40 09:38:17 Set A/D channel type result=40 09:38:17 Set A/D encoding result=40 09:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:17 Set channel filter=0.000000e+000 result=40 09:38:17 Config A/D Result=40 09:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:17 Get A/D filter: -9.255963e+061 result=40 09:38:17 Get A/D value=-858993460 result=40 09:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:17 Parameters OK 09:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:17 Set A/D data flow result=40 09:38:17 Set A/D channel type result=40 09:38:17 Set A/D encoding result=40 09:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:17 Set channel filter=0.000000e+000 result=40 09:38:17 Config A/D Result=40 09:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:17 Get A/D filter: -9.255963e+061 result=40 09:38:17 Get A/D value=-858993460 result=40 09:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:17 Aux= 09:38:17 Message to Camera, serial 217221 queued 09:38:54 Received message from Master: op=PointingHead serial=217234 09:38:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:38:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:38:54 Point started: ret=0 09:38:54 point_skyscan result=0 09:38:55 Check angles 09:38:55 SkyScan query 09:38:56 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.555<-17437 Statuses=0009 0009 09:38:56 Msec=0 True Az=109.185 Ze=-81.555 Az status=0009 Ze status=0009 09:38:56 Check angles 09:38:56 SkyScan query 09:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.93<-18862 Statuses=0008 0009 09:38:56 Msec=750 True Az=112.995 Ze=-102.93 Az status=0008 Ze status=0009 09:38:57 Check angles 09:38:57 SkyScan query 09:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.335<-20289 Statuses=0008 0009 09:38:57 Msec=1500 True Az=112.995 Ze=-124.335 Az status=0008 Ze status=0009 09:38:57 Check angles 09:38:57 SkyScan query 09:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.275<-21685 Statuses=0008 0009 09:38:58 Msec=2250 True Az=112.995 Ze=-145.275 Az status=0008 Ze status=0009 09:38:58 Check angles 09:38:58 SkyScan query 09:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.215<-23081 Statuses=0008 0009 09:38:59 Msec=3000 True Az=112.995 Ze=-166.215 Az status=0008 Ze status=0009 09:38:59 Check angles 09:38:59 SkyScan query 09:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:38:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:38:59 Message to Master queued w/err=0: serial=217234 error=0 09:39:04 Received message from Master: op=Filter serial=217235 09:39:04 Color wheel filter change from 0 to 0 09:39:04 FLIGetFilterPos err=0 currentPosition=0 09:39:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:04 Filter is already there-color wheel unchanged 09:39:05 Received message from Master: op=Shutter serial=217236 09:39:05 Shutter LASER open 09:39:05 Received message from Camera: op=State serial=217238 09:39:05 GetSingleValue result=40 Value=cccccccc 09:39:05 SkyScan query 09:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:39:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:05 Parameters OK 09:39:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:05 Set A/D data flow result=40 09:39:05 Set A/D channel type result=40 09:39:05 Set A/D encoding result=40 09:39:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:05 Set channel filter=0.000000e+000 result=40 09:39:05 Config A/D Result=40 09:39:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:05 Get A/D filter: -9.255963e+061 result=40 09:39:05 Get A/D value=-858993460 result=40 09:39:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:05 Parameters OK 09:39:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:05 Set A/D data flow result=40 09:39:05 Set A/D channel type result=40 09:39:05 Set A/D encoding result=40 09:39:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:05 Set channel filter=0.000000e+000 result=40 09:39:05 Config A/D Result=40 09:39:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:05 Get A/D filter: -9.255963e+061 result=40 09:39:05 Get A/D value=-858993460 result=40 09:39:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:05 Aux= 09:39:05 Message to Camera, serial 217238 queued 09:39:14 Received message from Master: op=Shutter serial=217248 09:39:14 Shutter LASER close 09:39:14 Received message from Master: op=PointingHead serial=217252 09:39:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:39:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:39:15 Point started: ret=0 09:39:15 point_skyscan result=0 09:39:15 Check angles 09:39:15 SkyScan query 09:39:16 SkyScan query done: ret=0 az=90.18<-6012 ze=157.53<-1498 Statuses=0009 0009 09:39:16 Msec=0 True Az=90.18 Ze=157.53 Az status=0009 Ze status=0009 09:39:16 Check angles 09:39:16 SkyScan query 09:39:17 SkyScan query done: ret=0 az=72.78<-4852 ze=136.545<-2897 Statuses=0009 0009 09:39:17 Msec=750 True Az=72.78 Ze=136.545 Az status=0009 Ze status=0009 09:39:17 Check angles 09:39:17 SkyScan query 09:39:18 SkyScan query done: ret=0 az=55.26<-3684 ze=115.65<-4290 Statuses=0009 0009 09:39:18 Msec=1500 True Az=55.26 Ze=115.65 Az status=0009 Ze status=0009 09:39:18 Check angles 09:39:18 SkyScan query 09:39:18 SkyScan query done: ret=0 az=40.98<-2732 ze=94.635<-5691 Statuses=0009 0009 09:39:18 Msec=2250 True Az=40.98 Ze=94.635 Az status=0009 Ze status=0009 09:39:18 Check angles 09:39:18 SkyScan query 09:39:19 SkyScan query done: ret=0 az=40.995<-2733 ze=73.74<-7084 Statuses=0008 0009 09:39:19 Msec=3000 True Az=40.995 Ze=73.74 Az status=0008 Ze status=0009 09:39:19 Check angles 09:39:19 SkyScan query 09:39:20 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 09:39:20 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 09:39:20 Check angles 09:39:20 SkyScan query 09:39:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:39:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:39:21 Message to Master queued w/err=0: serial=217252 error=0 09:39:26 Received message from Master: op=Filter serial=217253 09:39:26 Color wheel filter change from 0 to 0 09:39:26 FLIGetFilterPos err=0 currentPosition=0 09:39:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:26 Filter is already there-color wheel unchanged 09:39:26 Received message from Master: op=Shutter serial=217254 09:39:26 Shutter LASER close 09:39:26 Received message from Camera: op=State serial=217256 09:39:26 GetSingleValue result=40 Value=cccccccc 09:39:26 SkyScan query 09:39:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:39:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:26 Parameters OK 09:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:26 Set A/D data flow result=40 09:39:26 Set A/D channel type result=40 09:39:26 Set A/D encoding result=40 09:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:26 Set channel filter=0.000000e+000 result=40 09:39:26 Config A/D Result=40 09:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:26 Get A/D filter: -9.255963e+061 result=40 09:39:26 Get A/D value=-858993460 result=40 09:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:26 Parameters OK 09:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:26 Set A/D data flow result=40 09:39:26 Set A/D channel type result=40 09:39:26 Set A/D encoding result=40 09:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:26 Set channel filter=0.000000e+000 result=40 09:39:26 Config A/D Result=40 09:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:26 Get A/D filter: -9.255963e+061 result=40 09:39:26 Get A/D value=-858993460 result=40 09:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:26 Aux= 09:39:26 Message to Camera, serial 217256 queued 09:40:03 Received message from Master: op=PointingHead serial=217269 09:40:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:40:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:40:04 Point started: ret=0 09:40:04 point_skyscan result=0 09:40:04 Check angles 09:40:04 SkyScan query 09:40:05 SkyScan query done: ret=0 az=64.23<-4282 ze=66.54<-7564 Statuses=0009 0008 09:40:05 Msec=0 True Az=64.23 Ze=66.54 Az status=0009 Ze status=0008 09:40:05 Check angles 09:40:05 SkyScan query 09:40:06 SkyScan query done: ret=0 az=81.69<-5446 ze=66.51<-7566 Statuses=0009 0008 09:40:06 Msec=750 True Az=81.69 Ze=66.51 Az status=0009 Ze status=0008 09:40:06 Check angles 09:40:06 SkyScan query 09:40:06 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 09:40:06 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 09:40:07 Check angles 09:40:07 SkyScan query 09:40:07 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 09:40:07 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 09:40:07 Check angles 09:40:07 SkyScan query 09:40:08 SkyScan query done: ret=0 az=134.505<-8967 ze=66.495<-7567 Statuses=0009 0008 09:40:08 Msec=3000 True Az=134.505 Ze=66.495 Az status=0009 Ze status=0008 09:40:08 Check angles 09:40:08 SkyScan query 09:40:09 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 09:40:09 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 09:40:09 Check angles 09:40:09 SkyScan query 09:40:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:40:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:40:10 Message to Master queued w/err=0: serial=217269 error=0 09:40:15 Received message from Master: op=Filter serial=217270 09:40:15 Color wheel filter change from 0 to 0 09:40:15 FLIGetFilterPos err=0 currentPosition=0 09:40:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:15 Filter is already there-color wheel unchanged 09:40:15 Received message from Master: op=Shutter serial=217271 09:40:15 Shutter LASER close 09:40:15 Received message from Camera: op=State serial=217273 09:40:15 GetSingleValue result=40 Value=cccccccc 09:40:15 SkyScan query 09:40:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:40:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:15 Parameters OK 09:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:15 Set A/D data flow result=40 09:40:15 Set A/D channel type result=40 09:40:15 Set A/D encoding result=40 09:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:15 Set channel filter=0.000000e+000 result=40 09:40:15 Config A/D Result=40 09:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:15 Get A/D filter: -9.255963e+061 result=40 09:40:15 Get A/D value=-858993460 result=40 09:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:15 Parameters OK 09:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:15 Set A/D data flow result=40 09:40:15 Set A/D channel type result=40 09:40:15 Set A/D encoding result=40 09:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:15 Set channel filter=0.000000e+000 result=40 09:40:15 Config A/D Result=40 09:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:15 Get A/D filter: -9.255963e+061 result=40 09:40:15 Get A/D value=-858993460 result=40 09:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:15 Aux= 09:40:15 Message to Camera, serial 217273 queued 09:40:52 Received message from Master: op=PointingHead serial=217286 09:40:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:40:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:40:52 Point started: ret=0 09:40:52 point_skyscan result=0 09:40:53 Check angles 09:40:53 SkyScan query 09:40:54 SkyScan query done: ret=0 az=135.015<-9001 ze=36.735<-9551 Statuses=0009 0009 09:40:54 Msec=0 True Az=135.015 Ze=36.735 Az status=0009 Ze status=0009 09:40:54 Check angles 09:40:54 SkyScan query 09:40:55 SkyScan query done: ret=0 az=117.555<-7837 ze=15.795<-10947 Statuses=0009 0009 09:40:55 Msec=750 True Az=117.555 Ze=15.795 Az status=0009 Ze status=0009 09:40:55 Check angles 09:40:55 SkyScan query 09:40:55 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.19<-12346 Statuses=0009 0009 09:40:55 Msec=1500 True Az=100.2 Ze=-5.19 Az status=0009 Ze status=0009 09:40:55 Check angles 09:40:55 SkyScan query 09:40:56 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.145<-13743 Statuses=0009 0009 09:40:56 Msec=2250 True Az=82.65 Ze=-26.145 Az status=0009 Ze status=0009 09:40:56 Check angles 09:40:56 SkyScan query 09:40:57 SkyScan query done: ret=0 az=65.25<-4350 ze=-38.58<-14572 Statuses=0009 0008 09:40:57 Msec=3000 True Az=65.25 Ze=-38.58 Az status=0009 Ze status=0008 09:40:57 Check angles 09:40:57 SkyScan query 09:40:58 SkyScan query done: ret=0 az=47.61<-3174 ze=-38.52<-14568 Statuses=0009 0008 09:40:58 Msec=3750 True Az=47.61 Ze=-38.52 Az status=0009 Ze status=0008 09:40:58 Check angles 09:40:58 SkyScan query 09:40:58 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 09:40:58 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 09:40:58 Message to Master queued w/err=0: serial=217286 error=0 09:41:03 Received message from Master: op=Filter serial=217287 09:41:03 Color wheel filter change from 0 to 0 09:41:03 FLIGetFilterPos err=0 currentPosition=0 09:41:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:03 Filter is already there-color wheel unchanged 09:41:03 Received message from Master: op=Shutter serial=217288 09:41:03 Shutter LASER close 09:41:04 Received message from Camera: op=State serial=217290 09:41:04 GetSingleValue result=40 Value=cccccccc 09:41:04 SkyScan query 09:41:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:41:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:04 Parameters OK 09:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:04 Set A/D data flow result=40 09:41:04 Set A/D channel type result=40 09:41:04 Set A/D encoding result=40 09:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:04 Set channel filter=0.000000e+000 result=40 09:41:04 Config A/D Result=40 09:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:04 Get A/D filter: -9.255963e+061 result=40 09:41:04 Get A/D value=-858993460 result=40 09:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:04 Parameters OK 09:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:04 Set A/D data flow result=40 09:41:04 Set A/D channel type result=40 09:41:04 Set A/D encoding result=40 09:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:04 Set channel filter=0.000000e+000 result=40 09:41:04 Config A/D Result=40 09:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:04 Get A/D filter: -9.255963e+061 result=40 09:41:04 Get A/D value=-858993460 result=40 09:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:04 Aux= 09:41:04 Message to Camera, serial 217290 queued 09:41:41 Received message from Master: op=PointingHead serial=217303 09:41:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:41:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:41:41 Point started: ret=0 09:41:41 point_skyscan result=0 09:41:42 Check angles 09:41:42 SkyScan query 09:41:43 SkyScan query done: ret=0 az=64.035<-4269 ze=-68.28<-16552 Statuses=0009 0009 09:41:43 Msec=0 True Az=64.035 Ze=-68.28 Az status=0009 Ze status=0009 09:41:43 Check angles 09:41:43 SkyScan query 09:41:43 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.265<-17951 Statuses=0009 0009 09:41:43 Msec=750 True Az=81.57 Ze=-89.265 Az status=0009 Ze status=0009 09:41:44 Check angles 09:41:44 SkyScan query 09:41:44 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.655<-19377 Statuses=0009 0009 09:41:44 Msec=1500 True Az=99.36 Ze=-110.655 Az status=0009 Ze status=0009 09:41:44 Check angles 09:41:44 SkyScan query 09:41:45 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.58<-20772 Statuses=0009 0009 09:41:45 Msec=2250 True Az=116.79 Ze=-131.58 Az status=0009 Ze status=0009 09:41:45 Check angles 09:41:45 SkyScan query 09:41:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 09:41:46 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 09:41:46 Check angles 09:41:46 SkyScan query 09:41:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:41:46 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:41:46 Message to Master queued w/err=0: serial=217303 error=0 09:41:51 Received message from Master: op=Filter serial=217304 09:41:51 Color wheel filter change from 0 to 0 09:41:51 FLIGetFilterPos err=0 currentPosition=0 09:41:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:51 Filter is already there-color wheel unchanged 09:41:52 Received message from Master: op=Shutter serial=217305 09:41:52 Shutter LASER close 09:41:52 Received message from Camera: op=State serial=217307 09:41:52 GetSingleValue result=40 Value=cccccccc 09:41:52 SkyScan query 09:41:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:41:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:52 Parameters OK 09:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:52 Set A/D data flow result=40 09:41:52 Set A/D channel type result=40 09:41:52 Set A/D encoding result=40 09:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:52 Set channel filter=0.000000e+000 result=40 09:41:52 Config A/D Result=40 09:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:52 Get A/D filter: -9.255963e+061 result=40 09:41:52 Get A/D value=-858993460 result=40 09:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:52 Parameters OK 09:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:52 Set A/D data flow result=40 09:41:52 Set A/D channel type result=40 09:41:52 Set A/D encoding result=40 09:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:52 Set channel filter=0.000000e+000 result=40 09:41:52 Config A/D Result=40 09:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:52 Get A/D filter: -9.255963e+061 result=40 09:41:52 Get A/D value=-858993460 result=40 09:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:52 Aux= 09:41:52 Message to Camera, serial 217307 queued 09:42:29 Received message from Master: op=PointingHead serial=217320 09:42:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:42:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:42:29 Point started: ret=0 09:42:29 point_skyscan result=0 09:42:30 Check angles 09:42:30 SkyScan query 09:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0009 0009 09:42:31 Msec=0 True Az=112.995 Ze=-171.21 Az status=0009 Ze status=0009 09:42:31 Check angles 09:42:31 SkyScan query 09:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:42:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:42:31 Message to Master queued w/err=0: serial=217320 error=0 09:42:36 Received message from Master: op=Filter serial=217321 09:42:36 Color wheel filter change from 0 to 0 09:42:36 FLIGetFilterPos err=0 currentPosition=0 09:42:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:36 Filter is already there-color wheel unchanged 09:42:37 Received message from Master: op=Shutter serial=217322 09:42:37 Shutter LASER open 09:42:37 Received message from Camera: op=State serial=217324 09:42:37 GetSingleValue result=40 Value=cccccccc 09:42:37 SkyScan query 09:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:42:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:37 Parameters OK 09:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:37 Set A/D data flow result=40 09:42:37 Set A/D channel type result=40 09:42:37 Set A/D encoding result=40 09:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:37 Set channel filter=0.000000e+000 result=40 09:42:37 Config A/D Result=40 09:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:37 Get A/D filter: -9.255963e+061 result=40 09:42:37 Get A/D value=-858993460 result=40 09:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:37 Parameters OK 09:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:37 Set A/D data flow result=40 09:42:37 Set A/D channel type result=40 09:42:37 Set A/D encoding result=40 09:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:37 Set channel filter=0.000000e+000 result=40 09:42:37 Config A/D Result=40 09:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:37 Get A/D filter: -9.255963e+061 result=40 09:42:37 Get A/D value=-858993460 result=40 09:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:37 Aux= 09:42:37 Message to Camera, serial 217324 queued 09:42:46 Received message from Master: op=Shutter serial=217334 09:42:46 Shutter LASER close 09:42:46 Received message from Master: op=PointingHead serial=217338 09:42:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:42:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:42:47 Point started: ret=0 09:42:47 point_skyscan result=0 09:42:48 Check angles 09:42:48 SkyScan query 09:42:48 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.8<-21520 Statuses=0009 0009 09:42:48 Msec=0 True Az=136.365 Ze=-142.8 Az status=0009 Ze status=0009 09:42:48 Check angles 09:42:48 SkyScan query 09:42:49 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.875<-20125 Statuses=0009 0009 09:42:49 Msec=750 True Az=153.75 Ze=-121.875 Az status=0009 Ze status=0009 09:42:49 Check angles 09:42:49 SkyScan query 09:42:50 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.95<-18730 Statuses=0009 0009 09:42:50 Msec=1500 True Az=171.24 Ze=-100.95 Az status=0009 Ze status=0009 09:42:50 Check angles 09:42:50 SkyScan query 09:42:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.04<-17336 Statuses=0008 0009 09:42:50 Msec=2250 True Az=175.995 Ze=-80.04 Az status=0008 Ze status=0009 09:42:51 Check angles 09:42:51 SkyScan query 09:42:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.085<-15939 Statuses=0008 0009 09:42:51 Msec=3000 True Az=175.995 Ze=-59.085 Az status=0008 Ze status=0009 09:42:51 Check angles 09:42:51 SkyScan query 09:42:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:42:52 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:42:52 Message to Master queued w/err=0: serial=217338 error=0 09:42:57 Received message from Master: op=Filter serial=217339 09:42:57 Color wheel filter change from 0 to 0 09:42:57 FLIGetFilterPos err=0 currentPosition=0 09:42:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:57 Filter is already there-color wheel unchanged 09:42:57 Received message from Master: op=Shutter serial=217340 09:42:57 Shutter LASER close 09:42:57 Received message from Camera: op=State serial=217342 09:42:57 GetSingleValue result=40 Value=cccccccc 09:42:57 SkyScan query 09:42:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:42:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:58 Parameters OK 09:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:58 Set A/D data flow result=40 09:42:58 Set A/D channel type result=40 09:42:58 Set A/D encoding result=40 09:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:58 Set channel filter=0.000000e+000 result=40 09:42:58 Config A/D Result=40 09:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:58 Get A/D filter: -9.255963e+061 result=40 09:42:58 Get A/D value=-858993460 result=40 09:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:58 Parameters OK 09:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:58 Set A/D data flow result=40 09:42:58 Set A/D channel type result=40 09:42:58 Set A/D encoding result=40 09:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:58 Set channel filter=0.000000e+000 result=40 09:42:58 Config A/D Result=40 09:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:58 Get A/D filter: -9.255963e+061 result=40 09:42:58 Get A/D value=-858993460 result=40 09:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:58 Aux= 09:42:58 Message to Camera, serial 217342 queued 09:43:35 Received message from Master: op=PointingHead serial=217355 09:43:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:43:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:43:35 Point started: ret=0 09:43:35 point_skyscan result=0 09:43:36 Check angles 09:43:36 SkyScan query 09:43:36 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.915<-13461 Statuses=0009 0009 09:43:36 Msec=0 True Az=153.12 Ze=-21.915 Az status=0009 Ze status=0009 09:43:36 Check angles 09:43:36 SkyScan query 09:43:37 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.885<-12059 Statuses=0009 0009 09:43:37 Msec=750 True Az=135.705 Ze=-0.885 Az status=0009 Ze status=0009 09:43:37 Check angles 09:43:37 SkyScan query 09:43:38 SkyScan query done: ret=0 az=118.14<-7876 ze=20.025<-10665 Statuses=0009 0009 09:43:38 Msec=1500 True Az=118.14 Ze=20.025 Az status=0009 Ze status=0009 09:43:38 Check angles 09:43:38 SkyScan query 09:43:39 SkyScan query done: ret=0 az=100.8<-6720 ze=41.01<-9266 Statuses=0009 0009 09:43:39 Msec=2250 True Az=100.8 Ze=41.01 Az status=0009 Ze status=0009 09:43:39 Check angles 09:43:39 SkyScan query 09:43:39 SkyScan query done: ret=0 az=85.95<-5730 ze=51.54<-8564 Statuses=0009 0008 09:43:39 Msec=3000 True Az=85.95 Ze=51.54 Az status=0009 Ze status=0008 09:43:39 Check angles 09:43:39 SkyScan query 09:43:40 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 09:43:40 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 09:43:40 Message to Master queued w/err=0: serial=217355 error=0 09:43:45 Received message from Master: op=Filter serial=217356 09:43:45 Color wheel filter change from 0 to 0 09:43:45 FLIGetFilterPos err=0 currentPosition=0 09:43:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:45 Filter is already there-color wheel unchanged 09:43:45 Received message from Master: op=Shutter serial=217357 09:43:45 Shutter LASER close 09:43:45 Received message from Camera: op=State serial=217359 09:43:45 GetSingleValue result=40 Value=cccccccc 09:43:45 SkyScan query 09:43:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:43:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:46 Parameters OK 09:43:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:46 Set A/D data flow result=40 09:43:46 Set A/D channel type result=40 09:43:46 Set A/D encoding result=40 09:43:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:46 Set channel filter=0.000000e+000 result=40 09:43:46 Config A/D Result=40 09:43:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:46 Get A/D filter: -9.255963e+061 result=40 09:43:46 Get A/D value=-858993460 result=40 09:43:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:46 Parameters OK 09:43:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:46 Set A/D data flow result=40 09:43:46 Set A/D channel type result=40 09:43:46 Set A/D encoding result=40 09:43:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:46 Set channel filter=0.000000e+000 result=40 09:43:46 Config A/D Result=40 09:43:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:46 Get A/D filter: -9.255963e+061 result=40 09:43:46 Get A/D value=-858993460 result=40 09:43:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:46 Aux= 09:43:46 Message to Camera, serial 217359 queued 09:44:22 Received message from Master: op=PointingHead serial=217371 09:44:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:44:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:44:22 Point started: ret=0 09:44:22 point_skyscan result=0 09:44:23 Check angles 09:44:23 SkyScan query 09:44:23 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 09:44:23 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 09:44:24 Check angles 09:44:24 SkyScan query 09:44:24 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 09:44:24 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 09:44:24 Check angles 09:44:24 SkyScan query 09:44:25 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 09:44:25 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 09:44:25 Check angles 09:44:25 SkyScan query 09:44:26 SkyScan query done: ret=0 az=162.27<-10818 ze=38.505<-9433 Statuses=0009 0008 09:44:26 Msec=2250 True Az=162.27 Ze=38.505 Az status=0009 Ze status=0008 09:44:26 Check angles 09:44:26 SkyScan query 09:44:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:44:26 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:44:27 Check angles 09:44:27 SkyScan query 09:44:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:44:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:44:27 Message to Master queued w/err=0: serial=217371 error=0 09:44:32 Received message from Master: op=Filter serial=217372 09:44:32 Color wheel filter change from 0 to 0 09:44:32 FLIGetFilterPos err=0 currentPosition=0 09:44:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:32 Filter is already there-color wheel unchanged 09:44:32 Received message from Master: op=Shutter serial=217373 09:44:32 Shutter LASER close 09:44:32 Received message from Camera: op=State serial=217375 09:44:32 GetSingleValue result=40 Value=cccccccc 09:44:32 SkyScan query 09:44:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:44:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:33 Parameters OK 09:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:33 Set A/D data flow result=40 09:44:33 Set A/D channel type result=40 09:44:33 Set A/D encoding result=40 09:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:33 Set channel filter=0.000000e+000 result=40 09:44:33 Config A/D Result=40 09:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:33 Get A/D filter: -9.255963e+061 result=40 09:44:33 Get A/D value=-858993460 result=40 09:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:33 Parameters OK 09:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:33 Set A/D data flow result=40 09:44:33 Set A/D channel type result=40 09:44:33 Set A/D encoding result=40 09:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:33 Set channel filter=0.000000e+000 result=40 09:44:33 Config A/D Result=40 09:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:33 Get A/D filter: -9.255963e+061 result=40 09:44:33 Get A/D value=-858993460 result=40 09:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:33 Aux= 09:44:33 Message to Camera, serial 217375 queued 09:45:10 Received message from Master: op=PointingHead serial=217388 09:45:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:45:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:45:10 Point started: ret=0 09:45:10 point_skyscan result=0 09:45:11 Check angles 09:45:11 SkyScan query 09:45:11 SkyScan query done: ret=0 az=153.21<-10214 ze=8.97<-11402 Statuses=0009 0009 09:45:11 Msec=0 True Az=153.21 Ze=8.97 Az status=0009 Ze status=0009 09:45:12 Check angles 09:45:12 SkyScan query 09:45:12 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.39<-12826 Statuses=0009 0009 09:45:12 Msec=750 True Az=135.405 Ze=-12.39 Az status=0009 Ze status=0009 09:45:12 Check angles 09:45:12 SkyScan query 09:45:13 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.39<-14226 Statuses=0009 0009 09:45:13 Msec=1500 True Az=117.81 Ze=-33.39 Az status=0009 Ze status=0009 09:45:13 Check angles 09:45:13 SkyScan query 09:45:14 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.54<-15436 Statuses=0009 0009 09:45:14 Msec=2250 True Az=100.455 Ze=-51.54 Az status=0009 Ze status=0009 09:45:14 Check angles 09:45:14 SkyScan query 09:45:15 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 09:45:15 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 09:45:15 Check angles 09:45:15 SkyScan query 09:45:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:45:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:45:15 Message to Master queued w/err=0: serial=217388 error=0 09:45:20 Received message from Master: op=Filter serial=217389 09:45:20 Color wheel filter change from 0 to 0 09:45:20 FLIGetFilterPos err=0 currentPosition=0 09:45:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:20 Filter is already there-color wheel unchanged 09:45:20 Received message from Master: op=Shutter serial=217390 09:45:20 Shutter LASER close 09:45:20 Received message from Camera: op=State serial=217392 09:45:20 GetSingleValue result=40 Value=cccccccc 09:45:20 SkyScan query 09:45:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:45:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:21 Parameters OK 09:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:21 Set A/D data flow result=40 09:45:21 Set A/D channel type result=40 09:45:21 Set A/D encoding result=40 09:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:21 Set channel filter=0.000000e+000 result=40 09:45:21 Config A/D Result=40 09:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:21 Get A/D filter: -9.255963e+061 result=40 09:45:21 Get A/D value=-858993460 result=40 09:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:21 Parameters OK 09:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:21 Set A/D data flow result=40 09:45:21 Set A/D channel type result=40 09:45:21 Set A/D encoding result=40 09:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:21 Set channel filter=0.000000e+000 result=40 09:45:21 Config A/D Result=40 09:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:21 Get A/D filter: -9.255963e+061 result=40 09:45:21 Get A/D value=-858993460 result=40 09:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:21 Aux= 09:45:21 Message to Camera, serial 217392 queued 09:45:27 Received message from Master: op=Identify serial=217393 09:45:58 Received message from Master: op=PointingHead serial=217408 09:45:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:45:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:45:58 Point started: ret=0 09:45:58 point_skyscan result=0 09:45:59 Check angles 09:45:59 SkyScan query 09:46:00 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.015<-17401 Statuses=0009 0009 09:46:00 Msec=0 True Az=108.795 Ze=-81.015 Az status=0009 Ze status=0009 09:46:00 Check angles 09:46:00 SkyScan query 09:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102<-18800 Statuses=0008 0009 09:46:00 Msec=750 True Az=112.995 Ze=-102 Az status=0008 Ze status=0009 09:46:00 Check angles 09:46:00 SkyScan query 09:46:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 09:46:01 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 09:46:01 Check angles 09:46:01 SkyScan query 09:46:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 09:46:02 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 09:46:02 Check angles 09:46:02 SkyScan query 09:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 09:46:03 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 09:46:03 Check angles 09:46:03 SkyScan query 09:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:46:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:46:03 Message to Master queued w/err=0: serial=217408 error=0 09:46:08 Received message from Master: op=Filter serial=217409 09:46:08 Color wheel filter change from 0 to 0 09:46:08 FLIGetFilterPos err=0 currentPosition=0 09:46:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:08 Filter is already there-color wheel unchanged 09:46:09 Received message from Master: op=Shutter serial=217410 09:46:09 Shutter LASER open 09:46:09 Received message from Camera: op=State serial=217412 09:46:09 GetSingleValue result=40 Value=cccccccc 09:46:09 SkyScan query 09:46:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 [UTC 2018-12-17 09:46:09] 09:46:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:09 Parameters OK 09:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:09 Set A/D data flow result=40 09:46:09 Set A/D channel type result=40 09:46:09 Set A/D encoding result=40 09:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:09 Set channel filter=0.000000e+000 result=40 09:46:09 Config A/D Result=40 09:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:09 Get A/D filter: -9.255963e+061 result=40 09:46:09 Get A/D value=-858993460 result=40 09:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:09 Parameters OK 09:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:09 Set A/D data flow result=40 09:46:09 Set A/D channel type result=40 09:46:09 Set A/D encoding result=40 09:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:09 Set channel filter=0.000000e+000 result=40 09:46:09 Config A/D Result=40 09:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:09 Get A/D filter: -9.255963e+061 result=40 09:46:09 Get A/D value=-858993460 result=40 09:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:09 Aux= 09:46:09 Message to Camera, serial 217412 queued 09:46:18 Received message from Master: op=Shutter serial=217422 09:46:18 Shutter LASER close 09:46:18 Received message from Master: op=PointingHead serial=217426 09:46:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:46:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:46:18 Point started: ret=0 09:46:18 point_skyscan result=0 09:46:19 Check angles 09:46:19 SkyScan query 09:46:20 SkyScan query done: ret=0 az=89.655<-5977 ze=157.005<-1533 Statuses=0009 0009 09:46:20 Msec=0 True Az=89.655 Ze=157.005 Az status=0009 Ze status=0009 09:46:20 Check angles 09:46:20 SkyScan query 09:46:21 SkyScan query done: ret=0 az=72.255<-4817 ze=136.065<-2929 Statuses=0009 0009 09:46:21 Msec=750 True Az=72.255 Ze=136.065 Az status=0009 Ze status=0009 09:46:21 Check angles 09:46:21 SkyScan query 09:46:21 SkyScan query done: ret=0 az=54.9<-3660 ze=115.11<-4326 Statuses=0009 0009 09:46:21 Msec=1500 True Az=54.9 Ze=115.11 Az status=0009 Ze status=0009 09:46:21 Check angles 09:46:21 SkyScan query 09:46:22 SkyScan query done: ret=0 az=41.01<-2734 ze=94.155<-5723 Statuses=0009 0009 09:46:22 Msec=2250 True Az=41.01 Ze=94.155 Az status=0009 Ze status=0009 09:46:22 Check angles 09:46:22 SkyScan query 09:46:23 SkyScan query done: ret=0 az=40.98<-2732 ze=73.17<-7122 Statuses=0008 0009 09:46:23 Msec=3000 True Az=40.98 Ze=73.17 Az status=0008 Ze status=0009 09:46:23 Check angles 09:46:23 SkyScan query 09:46:24 SkyScan query done: ret=0 az=40.98<-2732 ze=52.44<-8504 Statuses=0008 0009 09:46:24 Msec=3750 True Az=40.98 Ze=52.44 Az status=0008 Ze status=0009 09:46:24 Check angles 09:46:24 SkyScan query 09:46:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:46:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:46:24 Message to Master queued w/err=0: serial=217426 error=0 09:46:29 Received message from Master: op=Filter serial=217427 09:46:29 Color wheel filter change from 0 to 0 09:46:29 FLIGetFilterPos err=0 currentPosition=0 09:46:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:29 Filter is already there-color wheel unchanged 09:46:29 Received message from Master: op=Shutter serial=217428 09:46:29 Shutter LASER close 09:46:30 Received message from Camera: op=State serial=217430 09:46:30 GetSingleValue result=40 Value=cccccccc 09:46:30 SkyScan query 09:46:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:46:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:30 Parameters OK 09:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:30 Set A/D data flow result=40 09:46:30 Set A/D channel type result=40 09:46:30 Set A/D encoding result=40 09:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:30 Set channel filter=0.000000e+000 result=40 09:46:30 Config A/D Result=40 09:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:30 Get A/D filter: -9.255963e+061 result=40 09:46:30 Get A/D value=-858993460 result=40 09:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:30 Parameters OK 09:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:30 Set A/D data flow result=40 09:46:30 Set A/D channel type result=40 09:46:30 Set A/D encoding result=40 09:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:30 Set channel filter=0.000000e+000 result=40 09:46:30 Config A/D Result=40 09:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:30 Get A/D filter: -9.255963e+061 result=40 09:46:30 Get A/D value=-858993460 result=40 09:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:30 Aux= 09:46:30 Message to Camera, serial 217430 queued 09:47:07 Received message from Master: op=PointingHead serial=217443 09:47:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:47:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:47:07 Point started: ret=0 09:47:07 point_skyscan result=0 09:47:08 Check angles 09:47:08 SkyScan query 09:47:09 SkyScan query done: ret=0 az=63.975<-4265 ze=66.54<-7564 Statuses=0009 0008 09:47:09 Msec=0 True Az=63.975 Ze=66.54 Az status=0009 Ze status=0008 09:47:09 Check angles 09:47:09 SkyScan query 09:47:10 SkyScan query done: ret=0 az=81.885<-5459 ze=66.51<-7566 Statuses=0009 0008 09:47:10 Msec=750 True Az=81.885 Ze=66.51 Az status=0009 Ze status=0008 09:47:10 Check angles 09:47:10 SkyScan query 09:47:10 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 09:47:10 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 09:47:10 Check angles 09:47:10 SkyScan query 09:47:11 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 09:47:11 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 09:47:11 Check angles 09:47:11 SkyScan query 09:47:12 SkyScan query done: ret=0 az=134.145<-8943 ze=66.495<-7567 Statuses=0009 0008 09:47:12 Msec=3000 True Az=134.145 Ze=66.495 Az status=0009 Ze status=0008 09:47:12 Check angles 09:47:12 SkyScan query 09:47:13 SkyScan query done: ret=0 az=151.59<-10106 ze=66.495<-7567 Statuses=0009 0008 09:47:13 Msec=3750 True Az=151.59 Ze=66.495 Az status=0009 Ze status=0008 09:47:13 Check angles 09:47:13 SkyScan query 09:47:13 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:47:13 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:47:13 Message to Master queued w/err=0: serial=217443 error=0 09:47:18 Received message from Master: op=Filter serial=217444 09:47:18 Color wheel filter change from 0 to 0 09:47:18 FLIGetFilterPos err=0 currentPosition=0 09:47:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:18 Filter is already there-color wheel unchanged 09:47:18 Received message from Master: op=Shutter serial=217445 09:47:18 Shutter LASER close 09:47:18 Received message from Camera: op=State serial=217447 09:47:18 GetSingleValue result=40 Value=cccccccc 09:47:18 SkyScan query 09:47:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:47:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:19 Parameters OK 09:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:19 Set A/D data flow result=40 09:47:19 Set A/D channel type result=40 09:47:19 Set A/D encoding result=40 09:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:19 Set channel filter=0.000000e+000 result=40 09:47:19 Config A/D Result=40 09:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:19 Get A/D filter: -9.255963e+061 result=40 09:47:19 Get A/D value=-858993460 result=40 09:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:19 Parameters OK 09:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:19 Set A/D data flow result=40 09:47:19 Set A/D channel type result=40 09:47:19 Set A/D encoding result=40 09:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:19 Set channel filter=0.000000e+000 result=40 09:47:19 Config A/D Result=40 09:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:19 Get A/D filter: -9.255963e+061 result=40 09:47:19 Get A/D value=-858993460 result=40 09:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:19 Aux= 09:47:19 Message to Camera, serial 217447 queued 09:47:56 Received message from Master: op=PointingHead serial=217460 09:47:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:47:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:47:56 Point started: ret=0 09:47:56 point_skyscan result=0 09:47:57 Check angles 09:47:57 SkyScan query 09:47:58 SkyScan query done: ret=0 az=134.97<-8998 ze=36.75<-9550 Statuses=0009 0009 09:47:58 Msec=0 True Az=134.97 Ze=36.75 Az status=0009 Ze status=0009 09:47:58 Check angles 09:47:58 SkyScan query 09:47:58 SkyScan query done: ret=0 az=117.54<-7836 ze=15.78<-10948 Statuses=0009 0009 09:47:58 Msec=750 True Az=117.54 Ze=15.78 Az status=0009 Ze status=0009 09:47:58 Check angles 09:47:58 SkyScan query 09:47:59 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.16<-12344 Statuses=0009 0009 09:47:59 Msec=1500 True Az=100.2 Ze=-5.16 Az status=0009 Ze status=0009 09:47:59 Check angles 09:47:59 SkyScan query 09:48:00 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.565<-13771 Statuses=0009 0009 09:48:00 Msec=2250 True Az=82.23 Ze=-26.565 Az status=0009 Ze status=0009 09:48:00 Check angles 09:48:00 SkyScan query 09:48:01 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.58<-14572 Statuses=0009 0008 09:48:01 Msec=3000 True Az=64.785 Ze=-38.58 Az status=0009 Ze status=0008 09:48:01 Check angles 09:48:01 SkyScan query 09:48:01 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.52<-14568 Statuses=0009 0008 09:48:01 Msec=3750 True Az=47.34 Ze=-38.52 Az status=0009 Ze status=0008 09:48:01 Check angles 09:48:01 SkyScan query 09:48:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:48:02 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:48:02 Message to Master queued w/err=0: serial=217460 error=0 09:48:07 Received message from Master: op=Filter serial=217461 09:48:07 Color wheel filter change from 0 to 0 09:48:07 FLIGetFilterPos err=0 currentPosition=0 09:48:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:07 Filter is already there-color wheel unchanged 09:48:07 Received message from Master: op=Shutter serial=217462 09:48:07 Shutter LASER close 09:48:07 Received message from Camera: op=State serial=217464 09:48:07 GetSingleValue result=40 Value=cccccccc 09:48:07 SkyScan query 09:48:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:48:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:08 Parameters OK 09:48:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:08 Set A/D data flow result=40 09:48:08 Set A/D channel type result=40 09:48:08 Set A/D encoding result=40 09:48:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:08 Set channel filter=0.000000e+000 result=40 09:48:08 Config A/D Result=40 09:48:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:08 Get A/D filter: -9.255963e+061 result=40 09:48:08 Get A/D value=-858993460 result=40 09:48:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:08 Parameters OK 09:48:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:08 Set A/D data flow result=40 09:48:08 Set A/D channel type result=40 09:48:08 Set A/D encoding result=40 09:48:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:08 Set channel filter=0.000000e+000 result=40 09:48:08 Config A/D Result=40 09:48:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:08 Get A/D filter: -9.255963e+061 result=40 09:48:08 Get A/D value=-858993460 result=40 09:48:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:08 Aux= 09:48:08 Message to Camera, serial 217464 queued 09:48:45 Received message from Master: op=PointingHead serial=217477 09:48:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:48:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:48:45 Point started: ret=0 09:48:45 point_skyscan result=0 09:48:46 Check angles 09:48:46 SkyScan query 09:48:46 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.175<-16545 Statuses=0009 0009 09:48:46 Msec=0 True Az=64.005 Ze=-68.175 Az status=0009 Ze status=0009 09:48:47 Check angles 09:48:47 SkyScan query 09:48:47 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.58<-17972 Statuses=0009 0009 09:48:47 Msec=750 True Az=81.765 Ze=-89.58 Az status=0009 Ze status=0009 09:48:47 Check angles 09:48:47 SkyScan query 09:48:48 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.52<-19368 Statuses=0009 0009 09:48:48 Msec=1500 True Az=99.285 Ze=-110.52 Az status=0009 Ze status=0009 09:48:48 Check angles 09:48:48 SkyScan query 09:48:49 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.445<-20763 Statuses=0009 0009 09:48:49 Msec=2250 True Az=116.82 Ze=-131.445 Az status=0009 Ze status=0009 09:48:49 Check angles 09:48:49 SkyScan query 09:48:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 09:48:49 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 09:48:50 Check angles 09:48:50 SkyScan query 09:48:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:48:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:48:50 Message to Master queued w/err=0: serial=217477 error=0 09:48:55 Received message from Master: op=Filter serial=217478 09:48:55 Color wheel filter change from 0 to 0 09:48:55 FLIGetFilterPos err=0 currentPosition=0 09:48:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:55 Filter is already there-color wheel unchanged 09:48:55 Received message from Master: op=Shutter serial=217479 09:48:55 Shutter LASER close 09:48:55 Received message from Camera: op=State serial=217481 09:48:55 GetSingleValue result=40 Value=cccccccc 09:48:55 SkyScan query 09:48:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:48:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:56 Parameters OK 09:48:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:56 Set A/D data flow result=40 09:48:56 Set A/D channel type result=40 09:48:56 Set A/D encoding result=40 09:48:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:56 Set channel filter=0.000000e+000 result=40 09:48:56 Config A/D Result=40 09:48:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:56 Get A/D filter: -9.255963e+061 result=40 09:48:56 Get A/D value=-858993460 result=40 09:48:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:56 Parameters OK 09:48:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:56 Set A/D data flow result=40 09:48:56 Set A/D channel type result=40 09:48:56 Set A/D encoding result=40 09:48:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:56 Set channel filter=0.000000e+000 result=40 09:48:56 Config A/D Result=40 09:48:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:56 Get A/D filter: -9.255963e+061 result=40 09:48:56 Get A/D value=-858993460 result=40 09:48:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:56 Aux= 09:48:56 Message to Camera, serial 217481 queued 09:49:33 Received message from Master: op=PointingHead serial=217494 09:49:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:49:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:49:33 Point started: ret=0 09:49:33 point_skyscan result=0 09:49:34 Check angles 09:49:34 SkyScan query 09:49:35 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 09:49:35 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 09:49:35 Check angles 09:49:35 SkyScan query 09:49:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:49:35 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:49:35 Message to Master queued w/err=0: serial=217494 error=0 09:49:40 Received message from Master: op=Filter serial=217495 09:49:40 Color wheel filter change from 0 to 0 09:49:40 FLIGetFilterPos err=0 currentPosition=0 09:49:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:40 Filter is already there-color wheel unchanged 09:49:40 Received message from Master: op=Shutter serial=217496 09:49:40 Shutter LASER open 09:49:41 Received message from Camera: op=State serial=217498 09:49:41 GetSingleValue result=40 Value=cccccccc 09:49:41 SkyScan query 09:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:49:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:41 Parameters OK 09:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:41 Set A/D data flow result=40 09:49:41 Set A/D channel type result=40 09:49:41 Set A/D encoding result=40 09:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:41 Set channel filter=0.000000e+000 result=40 09:49:41 Config A/D Result=40 09:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:41 Get A/D filter: -9.255963e+061 result=40 09:49:41 Get A/D value=-858993460 result=40 09:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:41 Parameters OK 09:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:41 Set A/D data flow result=40 09:49:41 Set A/D channel type result=40 09:49:41 Set A/D encoding result=40 09:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:41 Set channel filter=0.000000e+000 result=40 09:49:41 Config A/D Result=40 09:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:41 Get A/D filter: -9.255963e+061 result=40 09:49:41 Get A/D value=-858993460 result=40 09:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:41 Aux= 09:49:41 Message to Camera, serial 217498 queued 09:49:50 Received message from Master: op=Shutter serial=217508 09:49:50 Shutter LASER close 09:49:50 Received message from Master: op=PointingHead serial=217512 09:49:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:49:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:49:51 Point started: ret=0 09:49:51 point_skyscan result=0 09:49:51 Check angles 09:49:51 SkyScan query 09:49:52 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.205<-21547 Statuses=0009 0009 09:49:52 Msec=0 True Az=135.945 Ze=-143.205 Az status=0009 Ze status=0009 09:49:52 Check angles 09:49:52 SkyScan query 09:49:53 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.25<-20150 Statuses=0009 0009 09:49:53 Msec=750 True Az=153.51 Ze=-122.25 Az status=0009 Ze status=0009 09:49:53 Check angles 09:49:53 SkyScan query 09:49:53 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.325<-18755 Statuses=0009 0009 09:49:53 Msec=1500 True Az=170.985 Ze=-101.325 Az status=0009 Ze status=0009 09:49:54 Check angles 09:49:54 SkyScan query 09:49:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.37<-17358 Statuses=0008 0009 09:49:54 Msec=2250 True Az=175.995 Ze=-80.37 Az status=0008 Ze status=0009 09:49:54 Check angles 09:49:54 SkyScan query 09:49:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.415<-15961 Statuses=0008 0009 09:49:55 Msec=3000 True Az=175.995 Ze=-59.415 Az status=0008 Ze status=0009 09:49:55 Check angles 09:49:55 SkyScan query 09:49:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 09:49:56 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 09:49:56 Message to Master queued w/err=0: serial=217512 error=0 09:50:01 Received message from Master: op=Filter serial=217513 09:50:01 Color wheel filter change from 0 to 0 09:50:01 FLIGetFilterPos err=0 currentPosition=0 09:50:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:01 Filter is already there-color wheel unchanged 09:50:01 Received message from Master: op=Shutter serial=217514 09:50:01 Shutter LASER close 09:50:01 Received message from Camera: op=State serial=217516 09:50:01 GetSingleValue result=40 Value=cccccccc 09:50:01 SkyScan query 09:50:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:50:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:02 Parameters OK 09:50:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:02 Set A/D data flow result=40 09:50:02 Set A/D channel type result=40 09:50:02 Set A/D encoding result=40 09:50:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:02 Set channel filter=0.000000e+000 result=40 09:50:02 Config A/D Result=40 09:50:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:02 Get A/D filter: -9.255963e+061 result=40 09:50:02 Get A/D value=-858993460 result=40 09:50:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:02 Parameters OK 09:50:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:02 Set A/D data flow result=40 09:50:02 Set A/D channel type result=40 09:50:02 Set A/D encoding result=40 09:50:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:02 Set channel filter=0.000000e+000 result=40 09:50:02 Config A/D Result=40 09:50:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:02 Get A/D filter: -9.255963e+061 result=40 09:50:02 Get A/D value=-858993460 result=40 09:50:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:02 Aux= 09:50:02 Message to Camera, serial 217516 queued 09:50:38 Received message from Master: op=PointingHead serial=217529 09:50:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:50:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:50:39 Point started: ret=0 09:50:39 point_skyscan result=0 09:50:40 Check angles 09:50:40 SkyScan query 09:50:40 SkyScan query done: ret=0 az=153.06<-10204 ze=-21.825<-13455 Statuses=0009 0009 09:50:40 Msec=0 True Az=153.06 Ze=-21.825 Az status=0009 Ze status=0009 09:50:40 Check angles 09:50:40 SkyScan query 09:50:41 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.39<-12026 Statuses=0009 0009 09:50:41 Msec=750 True Az=135.12 Ze=-0.39 Az status=0009 Ze status=0009 09:50:41 Check angles 09:50:41 SkyScan query 09:50:42 SkyScan query done: ret=0 az=117.705<-7847 ze=20.55<-10630 Statuses=0009 0009 09:50:42 Msec=1500 True Az=117.705 Ze=20.55 Az status=0009 Ze status=0009 09:50:42 Check angles 09:50:42 SkyScan query 09:50:42 SkyScan query done: ret=0 az=100.335<-6689 ze=41.55<-9230 Statuses=0009 0009 09:50:42 Msec=2250 True Az=100.335 Ze=41.55 Az status=0009 Ze status=0009 09:50:43 Check angles 09:50:43 SkyScan query 09:50:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 09:50:43 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 09:50:43 Check angles 09:50:43 SkyScan query 09:50:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:50:44 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:50:44 Message to Master queued w/err=0: serial=217529 error=0 09:50:49 Received message from Master: op=Filter serial=217530 09:50:49 Color wheel filter change from 0 to 0 09:50:49 FLIGetFilterPos err=0 currentPosition=0 09:50:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:49 Filter is already there-color wheel unchanged 09:50:49 Received message from Master: op=Shutter serial=217531 09:50:49 Shutter LASER close 09:50:49 Received message from Camera: op=State serial=217533 09:50:49 GetSingleValue result=40 Value=cccccccc 09:50:49 SkyScan query 09:50:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:50:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:50 Parameters OK 09:50:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:50 Set A/D data flow result=40 09:50:50 Set A/D channel type result=40 09:50:50 Set A/D encoding result=40 09:50:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:50 Set channel filter=0.000000e+000 result=40 09:50:50 Config A/D Result=40 09:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:50 Get A/D filter: -9.255963e+061 result=40 09:50:50 Get A/D value=-858993460 result=40 09:50:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:50 Parameters OK 09:50:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:50 Set A/D data flow result=40 09:50:50 Set A/D channel type result=40 09:50:50 Set A/D encoding result=40 09:50:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:50 Set channel filter=0.000000e+000 result=40 09:50:50 Config A/D Result=40 09:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:50 Get A/D filter: -9.255963e+061 result=40 09:50:50 Get A/D value=-858993460 result=40 09:50:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:50 Aux= 09:50:50 Message to Camera, serial 217533 queued 09:51:27 Received message from Master: op=PointingHead serial=217546 09:51:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:51:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:51:27 Point started: ret=0 09:51:27 point_skyscan result=0 09:51:28 Check angles 09:51:28 SkyScan query 09:51:28 SkyScan query done: ret=0 az=109.185<-7279 ze=38.475<-9435 Statuses=0009 0008 09:51:28 Msec=0 True Az=109.185 Ze=38.475 Az status=0009 Ze status=0008 09:51:28 Check angles 09:51:28 SkyScan query 09:51:29 SkyScan query done: ret=0 az=127.035<-8469 ze=38.505<-9433 Statuses=0009 0008 09:51:29 Msec=750 True Az=127.035 Ze=38.505 Az status=0009 Ze status=0008 09:51:29 Check angles 09:51:29 SkyScan query 09:51:30 SkyScan query done: ret=0 az=144.915<-9661 ze=38.505<-9433 Statuses=0009 0008 09:51:30 Msec=1500 True Az=144.915 Ze=38.505 Az status=0009 Ze status=0008 09:51:30 Check angles 09:51:30 SkyScan query 09:51:30 SkyScan query done: ret=0 az=162.315<-10821 ze=38.505<-9433 Statuses=0009 0008 09:51:30 Msec=2250 True Az=162.315 Ze=38.505 Az status=0009 Ze status=0008 09:51:31 Check angles 09:51:31 SkyScan query 09:51:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:51:31 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:51:31 Check angles 09:51:31 SkyScan query 09:51:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:51:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:51:32 Message to Master queued w/err=0: serial=217546 error=0 09:51:37 Received message from Master: op=Filter serial=217547 09:51:37 Color wheel filter change from 0 to 0 09:51:37 FLIGetFilterPos err=0 currentPosition=0 09:51:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:37 Filter is already there-color wheel unchanged 09:51:37 Received message from Master: op=Shutter serial=217548 09:51:37 Shutter LASER close 09:51:37 Received message from Camera: op=State serial=217550 09:51:37 GetSingleValue result=40 Value=cccccccc 09:51:37 SkyScan query 09:51:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:51:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:38 Parameters OK 09:51:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:38 Set A/D data flow result=40 09:51:38 Set A/D channel type result=40 09:51:38 Set A/D encoding result=40 09:51:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:38 Set channel filter=0.000000e+000 result=40 09:51:38 Config A/D Result=40 09:51:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:38 Get A/D filter: -9.255963e+061 result=40 09:51:38 Get A/D value=-858993460 result=40 09:51:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:38 Parameters OK 09:51:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:38 Set A/D data flow result=40 09:51:38 Set A/D channel type result=40 09:51:38 Set A/D encoding result=40 09:51:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:38 Set channel filter=0.000000e+000 result=40 09:51:38 Config A/D Result=40 09:51:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:38 Get A/D filter: -9.255963e+061 result=40 09:51:38 Get A/D value=-858993460 result=40 09:51:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:38 Aux= 09:51:38 Message to Camera, serial 217550 queued 09:52:15 Received message from Master: op=PointingHead serial=217563 09:52:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:52:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:52:15 Point started: ret=0 09:52:15 point_skyscan result=0 09:52:16 Check angles 09:52:16 SkyScan query 09:52:16 SkyScan query done: ret=0 az=152.58<-10172 ze=8.16<-11456 Statuses=0009 0009 09:52:16 Msec=0 True Az=152.58 Ze=8.16 Az status=0009 Ze status=0009 09:52:16 Check angles 09:52:16 SkyScan query 09:52:17 SkyScan query done: ret=0 az=135.045<-9003 ze=-12.765<-12851 Statuses=0009 0009 09:52:17 Msec=750 True Az=135.045 Ze=-12.765 Az status=0009 Ze status=0009 09:52:17 Check angles 09:52:17 SkyScan query 09:52:18 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.75<-14250 Statuses=0009 0009 09:52:18 Msec=1500 True Az=117.57 Ze=-33.75 Az status=0009 Ze status=0009 09:52:18 Check angles 09:52:18 SkyScan query 09:52:19 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 09:52:19 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 09:52:19 Check angles 09:52:19 SkyScan query 09:52:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:52:19 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:52:19 Check angles 09:52:19 SkyScan query 09:52:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:52:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:52:20 Message to Master queued w/err=0: serial=217563 error=0 09:52:25 Received message from Master: op=Filter serial=217564 09:52:25 Color wheel filter change from 0 to 0 09:52:25 FLIGetFilterPos err=0 currentPosition=0 09:52:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:25 Filter is already there-color wheel unchanged 09:52:25 Received message from Master: op=Shutter serial=217565 09:52:25 Shutter LASER close 09:52:25 Received message from Camera: op=State serial=217567 09:52:25 GetSingleValue result=40 Value=cccccccc 09:52:25 SkyScan query 09:52:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:52:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:26 Parameters OK 09:52:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:26 Set A/D data flow result=40 09:52:26 Set A/D channel type result=40 09:52:26 Set A/D encoding result=40 09:52:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:26 Set channel filter=0.000000e+000 result=40 09:52:26 Config A/D Result=40 09:52:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:26 Get A/D filter: -9.255963e+061 result=40 09:52:26 Get A/D value=-858993460 result=40 09:52:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:26 Parameters OK 09:52:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:26 Set A/D data flow result=40 09:52:26 Set A/D channel type result=40 09:52:26 Set A/D encoding result=40 09:52:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:26 Set channel filter=0.000000e+000 result=40 09:52:26 Config A/D Result=40 09:52:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:26 Get A/D filter: -9.255963e+061 result=40 09:52:26 Get A/D value=-858993460 result=40 09:52:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:26 Aux= 09:52:26 Message to Camera, serial 217567 queued 09:53:03 Received message from Master: op=PointingHead serial=217580 09:53:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:53:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:53:03 Point started: ret=0 09:53:03 point_skyscan result=0 09:53:04 Check angles 09:53:04 SkyScan query 09:53:04 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.27<-17418 Statuses=0009 0009 09:53:04 Msec=0 True Az=109.185 Ze=-81.27 Az status=0009 Ze status=0009 09:53:05 Check angles 09:53:05 SkyScan query 09:53:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 09:53:05 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 09:53:05 Check angles 09:53:05 SkyScan query 09:53:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.165<-20211 Statuses=0008 0009 09:53:06 Msec=1500 True Az=112.995 Ze=-123.165 Az status=0008 Ze status=0009 09:53:06 Check angles 09:53:06 SkyScan query 09:53:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.135<-21609 Statuses=0008 0009 09:53:07 Msec=2250 True Az=112.995 Ze=-144.135 Az status=0008 Ze status=0009 09:53:07 Check angles 09:53:07 SkyScan query 09:53:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 09:53:07 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 09:53:08 Check angles 09:53:08 SkyScan query 09:53:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:53:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:53:08 Message to Master queued w/err=0: serial=217580 error=0 09:53:13 Received message from Master: op=Filter serial=217581 09:53:13 Color wheel filter change from 0 to 0 09:53:13 FLIGetFilterPos err=0 currentPosition=0 09:53:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:13 Filter is already there-color wheel unchanged 09:53:13 Received message from Master: op=Shutter serial=217582 09:53:13 Shutter LASER open 09:53:13 Received message from Camera: op=State serial=217584 09:53:13 GetSingleValue result=40 Value=cccccccc 09:53:13 SkyScan query 09:53:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:53:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:14 Parameters OK 09:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:14 Set A/D data flow result=40 09:53:14 Set A/D channel type result=40 09:53:14 Set A/D encoding result=40 09:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:14 Set channel filter=0.000000e+000 result=40 09:53:14 Config A/D Result=40 09:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:14 Get A/D filter: -9.255963e+061 result=40 09:53:14 Get A/D value=-858993460 result=40 09:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:14 Parameters OK 09:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:14 Set A/D data flow result=40 09:53:14 Set A/D channel type result=40 09:53:14 Set A/D encoding result=40 09:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:14 Set channel filter=0.000000e+000 result=40 09:53:14 Config A/D Result=40 09:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:14 Get A/D filter: -9.255963e+061 result=40 09:53:14 Get A/D value=-858993460 result=40 09:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:14 Aux= 09:53:14 Message to Camera, serial 217584 queued 09:53:22 Received message from Master: op=Shutter serial=217594 09:53:22 Shutter LASER close 09:53:23 Received message from Master: op=PointingHead serial=217598 09:53:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:53:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:53:23 Point started: ret=0 09:53:23 point_skyscan result=0 09:53:24 Check angles 09:53:24 SkyScan query 09:53:25 SkyScan query done: ret=0 az=89.88<-5992 ze=157.305<-1513 Statuses=0009 0009 09:53:25 Msec=0 True Az=89.88 Ze=157.305 Az status=0009 Ze status=0009 09:53:25 Check angles 09:53:25 SkyScan query 09:53:25 SkyScan query done: ret=0 az=72.15<-4810 ze=135.93<-2938 Statuses=0009 0009 09:53:25 Msec=750 True Az=72.15 Ze=135.93 Az status=0009 Ze status=0009 09:53:26 Check angles 09:53:26 SkyScan query 09:53:26 SkyScan query done: ret=0 az=54.45<-3630 ze=114.48<-4368 Statuses=0009 0009 09:53:26 Msec=1500 True Az=54.45 Ze=114.48 Az status=0009 Ze status=0009 09:53:26 Check angles 09:53:26 SkyScan query 09:53:27 SkyScan query done: ret=0 az=40.95<-2730 ze=93.57<-5762 Statuses=0009 0009 09:53:27 Msec=2250 True Az=40.95 Ze=93.57 Az status=0009 Ze status=0009 09:53:27 Check angles 09:53:27 SkyScan query 09:53:28 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 09:53:28 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 09:53:28 Check angles 09:53:28 SkyScan query 09:53:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.125<-8525 Statuses=0008 0009 09:53:28 Msec=3750 True Az=40.995 Ze=52.125 Az status=0008 Ze status=0009 09:53:29 Check angles 09:53:29 SkyScan query 09:53:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:53:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:53:29 Message to Master queued w/err=0: serial=217598 error=0 09:53:34 Received message from Master: op=Filter serial=217599 09:53:34 Color wheel filter change from 0 to 0 09:53:34 FLIGetFilterPos err=0 currentPosition=0 09:53:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:34 Filter is already there-color wheel unchanged 09:53:34 Received message from Master: op=Shutter serial=217600 09:53:34 Shutter LASER close 09:53:35 Received message from Camera: op=State serial=217602 09:53:35 GetSingleValue result=40 Value=cccccccc 09:53:35 SkyScan query 09:53:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:53:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:35 Parameters OK 09:53:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:35 Set A/D data flow result=40 09:53:35 Set A/D channel type result=40 09:53:35 Set A/D encoding result=40 09:53:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:35 Set channel filter=0.000000e+000 result=40 09:53:35 Config A/D Result=40 09:53:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:35 Get A/D filter: -9.255963e+061 result=40 09:53:35 Get A/D value=-858993460 result=40 09:53:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:35 Parameters OK 09:53:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:35 Set A/D data flow result=40 09:53:35 Set A/D channel type result=40 09:53:35 Set A/D encoding result=40 09:53:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:35 Set channel filter=0.000000e+000 result=40 09:53:35 Config A/D Result=40 09:53:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:35 Get A/D filter: -9.255963e+061 result=40 09:53:35 Get A/D value=-858993460 result=40 09:53:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:35 Aux= 09:53:35 Message to Camera, serial 217602 queued 09:54:12 Received message from Master: op=PointingHead serial=217615 09:54:12 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:54:12 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:54:12 Point started: ret=0 09:54:12 point_skyscan result=0 09:54:13 Check angles 09:54:13 SkyScan query 09:54:14 SkyScan query done: ret=0 az=63.945<-4263 ze=66.525<-7565 Statuses=0009 0008 09:54:14 Msec=0 True Az=63.945 Ze=66.525 Az status=0009 Ze status=0008 09:54:14 Check angles 09:54:14 SkyScan query 09:54:14 SkyScan query done: ret=0 az=81.855<-5457 ze=66.51<-7566 Statuses=0009 0008 09:54:14 Msec=750 True Az=81.855 Ze=66.51 Az status=0009 Ze status=0008 09:54:15 Check angles 09:54:15 SkyScan query 09:54:15 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 09:54:15 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 09:54:15 Check angles 09:54:15 SkyScan query 09:54:16 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 09:54:16 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 09:54:16 Check angles 09:54:16 SkyScan query 09:54:17 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 09:54:17 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 09:54:17 Check angles 09:54:17 SkyScan query 09:54:17 SkyScan query done: ret=0 az=151.575<-10105 ze=66.495<-7567 Statuses=0009 0008 09:54:17 Msec=3750 True Az=151.575 Ze=66.495 Az status=0009 Ze status=0008 09:54:18 Check angles 09:54:18 SkyScan query 09:54:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:54:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:54:18 Message to Master queued w/err=0: serial=217615 error=0 09:54:23 Received message from Master: op=Filter serial=217616 09:54:23 Color wheel filter change from 0 to 0 09:54:23 FLIGetFilterPos err=0 currentPosition=0 09:54:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:23 Filter is already there-color wheel unchanged 09:54:23 Received message from Master: op=Shutter serial=217617 09:54:23 Shutter LASER close 09:54:23 Received message from Camera: op=State serial=217619 09:54:23 GetSingleValue result=40 Value=cccccccc 09:54:23 SkyScan query 09:54:24 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:54:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:24 Parameters OK 09:54:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:24 Set A/D data flow result=40 09:54:24 Set A/D channel type result=40 09:54:24 Set A/D encoding result=40 09:54:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:24 Set channel filter=0.000000e+000 result=40 09:54:24 Config A/D Result=40 09:54:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:24 Get A/D filter: -9.255963e+061 result=40 09:54:24 Get A/D value=-858993460 result=40 09:54:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:24 Parameters OK 09:54:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:24 Set A/D data flow result=40 09:54:24 Set A/D channel type result=40 09:54:24 Set A/D encoding result=40 09:54:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:24 Set channel filter=0.000000e+000 result=40 09:54:24 Config A/D Result=40 09:54:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:24 Get A/D filter: -9.255963e+061 result=40 09:54:24 Get A/D value=-858993460 result=40 09:54:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:24 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:24 Aux= 09:54:24 Message to Camera, serial 217619 queued 09:55:01 Received message from Master: op=PointingHead serial=217632 09:55:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:55:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:55:01 Point started: ret=0 09:55:01 point_skyscan result=0 09:55:02 Check angles 09:55:02 SkyScan query 09:55:02 SkyScan query done: ret=0 az=134.79<-8986 ze=36.57<-9562 Statuses=0009 0009 09:55:02 Msec=0 True Az=134.79 Ze=36.57 Az status=0009 Ze status=0009 09:55:03 Check angles 09:55:03 SkyScan query 09:55:03 SkyScan query done: ret=0 az=117.285<-7819 ze=15.63<-10958 Statuses=0009 0009 09:55:03 Msec=750 True Az=117.285 Ze=15.63 Az status=0009 Ze status=0009 09:55:03 Check angles 09:55:03 SkyScan query 09:55:04 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.355<-12357 Statuses=0009 0009 09:55:04 Msec=1500 True Az=99.93 Ze=-5.355 Az status=0009 Ze status=0009 09:55:04 Check angles 09:55:04 SkyScan query 09:55:05 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.745<-13783 Statuses=0009 0009 09:55:05 Msec=2250 True Az=82.14 Ze=-26.745 Az status=0009 Ze status=0009 09:55:05 Check angles 09:55:05 SkyScan query 09:55:05 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.58<-14572 Statuses=0009 0008 09:55:05 Msec=3000 True Az=64.68 Ze=-38.58 Az status=0009 Ze status=0008 09:55:06 Check angles 09:55:06 SkyScan query 09:55:06 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.52<-14568 Statuses=0009 0008 09:55:06 Msec=3750 True Az=47.265 Ze=-38.52 Az status=0009 Ze status=0008 09:55:06 Check angles 09:55:06 SkyScan query 09:55:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:55:07 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:55:07 Message to Master queued w/err=0: serial=217632 error=0 09:55:12 Received message from Master: op=Filter serial=217633 09:55:12 Color wheel filter change from 0 to 0 09:55:12 FLIGetFilterPos err=0 currentPosition=0 09:55:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:12 Filter is already there-color wheel unchanged 09:55:12 Received message from Master: op=Shutter serial=217634 09:55:12 Shutter LASER close 09:55:12 Received message from Camera: op=State serial=217636 09:55:12 GetSingleValue result=40 Value=cccccccc 09:55:12 SkyScan query 09:55:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:55:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:13 Parameters OK 09:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:13 Set A/D data flow result=40 09:55:13 Set A/D channel type result=40 09:55:13 Set A/D encoding result=40 09:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:13 Set channel filter=0.000000e+000 result=40 09:55:13 Config A/D Result=40 09:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:13 Get A/D filter: -9.255963e+061 result=40 09:55:13 Get A/D value=-858993460 result=40 09:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:13 Parameters OK 09:55:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:13 Set A/D data flow result=40 09:55:13 Set A/D channel type result=40 09:55:13 Set A/D encoding result=40 09:55:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:13 Set channel filter=0.000000e+000 result=40 09:55:13 Config A/D Result=40 09:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:13 Get A/D filter: -9.255963e+061 result=40 09:55:13 Get A/D value=-858993460 result=40 09:55:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:13 Aux= 09:55:13 Message to Camera, serial 217636 queued 09:55:50 Received message from Master: op=PointingHead serial=217649 09:55:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:55:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:55:50 Point started: ret=0 09:55:50 point_skyscan result=0 09:55:51 Check angles 09:55:51 SkyScan query 09:55:51 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.58<-16572 Statuses=0009 0009 09:55:51 Msec=0 True Az=64.44 Ze=-68.58 Az status=0009 Ze status=0009 09:55:51 Check angles 09:55:51 SkyScan query 09:55:52 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.565<-17971 Statuses=0009 0009 09:55:52 Msec=750 True Az=81.795 Ze=-89.565 Az status=0009 Ze status=0009 09:55:52 Check angles 09:55:52 SkyScan query 09:55:53 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.52<-19368 Statuses=0009 0009 09:55:53 Msec=1500 True Az=99.45 Ze=-110.52 Az status=0009 Ze status=0009 [UTC 2018-12-17 09:55:53] 09:55:53 Check angles 09:55:53 SkyScan query 09:55:54 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.445<-20763 Statuses=0009 0009 09:55:54 Msec=2250 True Az=116.805 Ze=-131.445 Az status=0009 Ze status=0009 09:55:54 Check angles 09:55:54 SkyScan query 09:55:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 09:55:54 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 09:55:54 Check angles 09:55:54 SkyScan query 09:55:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:55:55 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:55:55 Message to Master queued w/err=0: serial=217649 error=0 09:56:00 Received message from Master: op=Filter serial=217650 09:56:00 Color wheel filter change from 0 to 0 09:56:00 FLIGetFilterPos err=0 currentPosition=0 09:56:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:00 Filter is already there-color wheel unchanged 09:56:00 Received message from Master: op=Shutter serial=217651 09:56:00 Shutter LASER close 09:56:00 Received message from Camera: op=State serial=217653 09:56:00 GetSingleValue result=40 Value=cccccccc 09:56:00 SkyScan query 09:56:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:56:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:01 Parameters OK 09:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:01 Set A/D data flow result=40 09:56:01 Set A/D channel type result=40 09:56:01 Set A/D encoding result=40 09:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:01 Set channel filter=0.000000e+000 result=40 09:56:01 Config A/D Result=40 09:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:01 Get A/D filter: -9.255963e+061 result=40 09:56:01 Get A/D value=-858993460 result=40 09:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:01 Parameters OK 09:56:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:01 Set A/D data flow result=40 09:56:01 Set A/D channel type result=40 09:56:01 Set A/D encoding result=40 09:56:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:01 Set channel filter=0.000000e+000 result=40 09:56:01 Config A/D Result=40 09:56:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:01 Get A/D filter: -9.255963e+061 result=40 09:56:01 Get A/D value=-858993460 result=40 09:56:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:01 Aux= 09:56:01 Message to Camera, serial 217653 queued 09:56:38 Received message from Master: op=PointingHead serial=217666 09:56:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:56:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:56:38 Point started: ret=0 09:56:38 point_skyscan result=0 09:56:39 Check angles 09:56:39 SkyScan query 09:56:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0009 0009 09:56:39 Msec=0 True Az=112.995 Ze=-171.195 Az status=0009 Ze status=0009 09:56:40 Check angles 09:56:40 SkyScan query 09:56:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:56:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:56:40 Message to Master queued w/err=0: serial=217666 error=0 09:56:45 Received message from Master: op=Filter serial=217667 09:56:45 Color wheel filter change from 0 to 0 09:56:45 FLIGetFilterPos err=0 currentPosition=0 09:56:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:45 Filter is already there-color wheel unchanged 09:56:45 Received message from Master: op=Shutter serial=217668 09:56:45 Shutter LASER open 09:56:45 Received message from Camera: op=State serial=217670 09:56:45 GetSingleValue result=40 Value=cccccccc 09:56:45 SkyScan query 09:56:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:56:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:46 Parameters OK 09:56:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:46 Set A/D data flow result=40 09:56:46 Set A/D channel type result=40 09:56:46 Set A/D encoding result=40 09:56:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:46 Set channel filter=0.000000e+000 result=40 09:56:46 Config A/D Result=40 09:56:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:46 Get A/D filter: -9.255963e+061 result=40 09:56:46 Get A/D value=-858993460 result=40 09:56:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:46 Parameters OK 09:56:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:46 Set A/D data flow result=40 09:56:46 Set A/D channel type result=40 09:56:46 Set A/D encoding result=40 09:56:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:46 Set channel filter=0.000000e+000 result=40 09:56:46 Config A/D Result=40 09:56:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:46 Get A/D filter: -9.255963e+061 result=40 09:56:46 Get A/D value=-858993460 result=40 09:56:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:46 Aux= 09:56:46 Message to Camera, serial 217670 queued 09:56:54 Received message from Master: op=Shutter serial=217680 09:56:55 Shutter LASER close 09:56:55 Received message from Master: op=PointingHead serial=217684 09:56:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:56:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:56:55 Point started: ret=0 09:56:55 point_skyscan result=0 09:56:56 Check angles 09:56:56 SkyScan query 09:56:57 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.34<-21556 Statuses=0009 0009 09:56:57 Msec=0 True Az=135.825 Ze=-143.34 Az status=0009 Ze status=0009 09:56:57 Check angles 09:56:57 SkyScan query 09:56:57 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.92<-20128 Statuses=0009 0009 09:56:57 Msec=750 True Az=153.705 Ze=-121.92 Az status=0009 Ze status=0009 09:56:58 Check angles 09:56:58 SkyScan query 09:56:58 SkyScan query done: ret=0 az=171.54<-11436 ze=-100.485<-18699 Statuses=0009 0009 09:56:58 Msec=1500 True Az=171.54 Ze=-100.485 Az status=0009 Ze status=0009 09:56:58 Check angles 09:56:58 SkyScan query 09:56:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.56<-17304 Statuses=0008 0009 09:56:59 Msec=2250 True Az=176.01 Ze=-79.56 Az status=0008 Ze status=0009 09:56:59 Check angles 09:56:59 SkyScan query 09:57:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.59<-15906 Statuses=0008 0009 09:57:00 Msec=3000 True Az=175.995 Ze=-58.59 Az status=0008 Ze status=0009 09:57:00 Check angles 09:57:00 SkyScan query 09:57:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 09:57:01 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 09:57:01 Message to Master queued w/err=0: serial=217684 error=0 09:57:06 Received message from Master: op=Filter serial=217685 09:57:06 Color wheel filter change from 0 to 0 09:57:06 FLIGetFilterPos err=0 currentPosition=0 09:57:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:06 Filter is already there-color wheel unchanged 09:57:06 Received message from Master: op=Shutter serial=217686 09:57:06 Shutter LASER close 09:57:06 Received message from Camera: op=State serial=217688 09:57:06 GetSingleValue result=40 Value=cccccccc 09:57:06 SkyScan query 09:57:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:57:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:06 Parameters OK 09:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:06 Set A/D data flow result=40 09:57:06 Set A/D channel type result=40 09:57:06 Set A/D encoding result=40 09:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:06 Set channel filter=0.000000e+000 result=40 09:57:06 Config A/D Result=40 09:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:06 Get A/D filter: -9.255963e+061 result=40 09:57:06 Get A/D value=-858993460 result=40 09:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:06 Parameters OK 09:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:06 Set A/D data flow result=40 09:57:06 Set A/D channel type result=40 09:57:06 Set A/D encoding result=40 09:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:06 Set channel filter=0.000000e+000 result=40 09:57:06 Config A/D Result=40 09:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:06 Get A/D filter: -9.255963e+061 result=40 09:57:06 Get A/D value=-858993460 result=40 09:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:06 Aux= 09:57:06 Message to Camera, serial 217688 queued 09:57:43 Received message from Master: op=PointingHead serial=217701 09:57:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:57:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:57:44 Point started: ret=0 09:57:44 point_skyscan result=0 09:57:44 Check angles 09:57:44 SkyScan query 09:57:45 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.885<-13459 Statuses=0009 0009 09:57:45 Msec=0 True Az=153.075 Ze=-21.885 Az status=0009 Ze status=0009 09:57:45 Check angles 09:57:45 SkyScan query 09:57:46 SkyScan query done: ret=0 az=135.6<-9040 ze=-0.885<-12059 Statuses=0009 0009 09:57:46 Msec=750 True Az=135.6 Ze=-0.885 Az status=0009 Ze status=0009 09:57:46 Check angles 09:57:46 SkyScan query 09:57:46 SkyScan query done: ret=0 az=117.615<-7841 ze=20.505<-10633 Statuses=0009 0009 09:57:46 Msec=1500 True Az=117.615 Ze=20.505 Az status=0009 Ze status=0009 09:57:47 Check angles 09:57:47 SkyScan query 09:57:47 SkyScan query done: ret=0 az=100.005<-6667 ze=41.895<-9207 Statuses=0009 0009 09:57:47 Msec=2250 True Az=100.005 Ze=41.895 Az status=0009 Ze status=0009 09:57:47 Check angles 09:57:47 SkyScan query 09:57:48 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:57:48 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:57:48 Check angles 09:57:48 SkyScan query 09:57:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:57:49 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:57:49 Message to Master queued w/err=0: serial=217701 error=0 09:57:54 Received message from Master: op=Filter serial=217702 09:57:54 Color wheel filter change from 0 to 0 09:57:54 FLIGetFilterPos err=0 currentPosition=0 09:57:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:54 Filter is already there-color wheel unchanged 09:57:54 Received message from Master: op=Shutter serial=217703 09:57:54 Shutter LASER close 09:57:54 Received message from Camera: op=State serial=217705 09:57:54 GetSingleValue result=40 Value=cccccccc 09:57:54 SkyScan query 09:57:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:57:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:55 Parameters OK 09:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:55 Set A/D data flow result=40 09:57:55 Set A/D channel type result=40 09:57:55 Set A/D encoding result=40 09:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:55 Set channel filter=0.000000e+000 result=40 09:57:55 Config A/D Result=40 09:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:55 Get A/D filter: -9.255963e+061 result=40 09:57:55 Get A/D value=-858993460 result=40 09:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:55 Parameters OK 09:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:55 Set A/D data flow result=40 09:57:55 Set A/D channel type result=40 09:57:55 Set A/D encoding result=40 09:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:55 Set channel filter=0.000000e+000 result=40 09:57:55 Config A/D Result=40 09:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:55 Get A/D filter: -9.255963e+061 result=40 09:57:55 Get A/D value=-858993460 result=40 09:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:55 Aux= 09:57:55 Message to Camera, serial 217705 queued 09:58:31 Received message from Master: op=PointingHead serial=217718 09:58:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:58:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:58:32 Point started: ret=0 09:58:32 point_skyscan result=0 09:58:33 Check angles 09:58:33 SkyScan query 09:58:33 SkyScan query done: ret=0 az=108.72<-7248 ze=38.475<-9435 Statuses=0009 0008 09:58:33 Msec=0 True Az=108.72 Ze=38.475 Az status=0009 Ze status=0008 09:58:33 Check angles 09:58:33 SkyScan query 09:58:34 SkyScan query done: ret=0 az=126.285<-8419 ze=38.505<-9433 Statuses=0009 0008 09:58:34 Msec=750 True Az=126.285 Ze=38.505 Az status=0009 Ze status=0008 09:58:34 Check angles 09:58:34 SkyScan query 09:58:35 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 09:58:35 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 09:58:35 Check angles 09:58:35 SkyScan query 09:58:35 SkyScan query done: ret=0 az=161.055<-10737 ze=38.505<-9433 Statuses=0009 0008 09:58:35 Msec=2250 True Az=161.055 Ze=38.505 Az status=0009 Ze status=0008 09:58:36 Check angles 09:58:36 SkyScan query 09:58:36 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:58:36 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:58:36 Check angles 09:58:36 SkyScan query 09:58:37 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:58:37 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:58:37 Message to Master queued w/err=0: serial=217718 error=0 09:58:42 Received message from Master: op=Filter serial=217719 09:58:42 Color wheel filter change from 0 to 0 09:58:42 FLIGetFilterPos err=0 currentPosition=0 09:58:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:42 Filter is already there-color wheel unchanged 09:58:42 Received message from Master: op=Shutter serial=217720 09:58:42 Shutter LASER close 09:58:42 Received message from Camera: op=State serial=217722 09:58:42 GetSingleValue result=40 Value=cccccccc 09:58:42 SkyScan query 09:58:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:58:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:43 Parameters OK 09:58:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:43 Set A/D data flow result=40 09:58:43 Set A/D channel type result=40 09:58:43 Set A/D encoding result=40 09:58:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:43 Set channel filter=0.000000e+000 result=40 09:58:43 Config A/D Result=40 09:58:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:43 Get A/D filter: -9.255963e+061 result=40 09:58:43 Get A/D value=-858993460 result=40 09:58:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:43 Parameters OK 09:58:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:43 Set A/D data flow result=40 09:58:43 Set A/D channel type result=40 09:58:43 Set A/D encoding result=40 09:58:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:43 Set channel filter=0.000000e+000 result=40 09:58:43 Config A/D Result=40 09:58:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:43 Get A/D filter: -9.255963e+061 result=40 09:58:43 Get A/D value=-858993460 result=40 09:58:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:43 Aux= 09:58:43 Message to Camera, serial 217722 queued 09:59:19 Received message from Master: op=PointingHead serial=217735 09:59:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:59:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:59:20 Point started: ret=0 09:59:20 point_skyscan result=0 09:59:21 Check angles 09:59:21 SkyScan query 09:59:21 SkyScan query done: ret=0 az=153.09<-10206 ze=8.73<-11418 Statuses=0009 0009 09:59:21 Msec=0 True Az=153.09 Ze=8.73 Az status=0009 Ze status=0009 09:59:21 Check angles 09:59:21 SkyScan query 09:59:22 SkyScan query done: ret=0 az=135.675<-9045 ze=-12.225<-12815 Statuses=0009 0009 09:59:22 Msec=750 True Az=135.675 Ze=-12.225 Az status=0009 Ze status=0009 09:59:22 Check angles 09:59:22 SkyScan query 09:59:23 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.615<-14241 Statuses=0009 0009 09:59:23 Msec=1500 True Az=117.75 Ze=-33.615 Az status=0009 Ze status=0009 09:59:23 Check angles 09:59:23 SkyScan query 09:59:23 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.555<-15437 Statuses=0009 0009 09:59:23 Msec=2250 True Az=100.395 Ze=-51.555 Az status=0009 Ze status=0009 09:59:24 Check angles 09:59:24 SkyScan query 09:59:24 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 09:59:24 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 09:59:24 Check angles 09:59:24 SkyScan query 09:59:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:59:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:59:25 Message to Master queued w/err=0: serial=217735 error=0 09:59:30 Received message from Master: op=Filter serial=217736 09:59:30 Color wheel filter change from 0 to 0 09:59:30 FLIGetFilterPos err=0 currentPosition=0 09:59:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:30 Filter is already there-color wheel unchanged 09:59:30 Received message from Master: op=Shutter serial=217737 09:59:30 Shutter LASER close 09:59:30 Received message from Camera: op=State serial=217739 09:59:30 GetSingleValue result=40 Value=cccccccc 09:59:30 SkyScan query 09:59:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:59:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:31 Parameters OK 09:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:31 Set A/D data flow result=40 09:59:31 Set A/D channel type result=40 09:59:31 Set A/D encoding result=40 09:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:31 Set channel filter=0.000000e+000 result=40 09:59:31 Config A/D Result=40 09:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:31 Get A/D filter: -9.255963e+061 result=40 09:59:31 Get A/D value=-858993460 result=40 09:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:31 Parameters OK 09:59:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:31 Set A/D data flow result=40 09:59:31 Set A/D channel type result=40 09:59:31 Set A/D encoding result=40 09:59:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:31 Set channel filter=0.000000e+000 result=40 09:59:31 Config A/D Result=40 09:59:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:31 Get A/D filter: -9.255963e+061 result=40 09:59:31 Get A/D value=-858993460 result=40 09:59:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:31 Aux= 09:59:31 Message to Camera, serial 217739 queued 10:00:08 Received message from Master: op=PointingHead serial=217752 10:00:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:00:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:00:08 Point started: ret=0 10:00:08 point_skyscan result=0 10:00:09 Check angles 10:00:09 SkyScan query 10:00:09 SkyScan query done: ret=0 az=108.705<-7247 ze=-80.985<-17399 Statuses=0009 0009 10:00:09 Msec=0 True Az=108.705 Ze=-80.985 Az status=0009 Ze status=0009 10:00:09 Check angles 10:00:09 SkyScan query 10:00:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 10:00:10 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 10:00:10 Check angles 10:00:10 SkyScan query 10:00:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 10:00:11 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 10:00:11 Check angles 10:00:11 SkyScan query 10:00:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 10:00:12 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 10:00:12 Check angles 10:00:12 SkyScan query 10:00:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 10:00:12 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 10:00:12 Check angles 10:00:12 SkyScan query 10:00:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:00:13 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:00:13 Message to Master queued w/err=0: serial=217752 error=0 10:00:18 Received message from Master: op=Filter serial=217753 10:00:18 Color wheel filter change from 0 to 0 10:00:18 FLIGetFilterPos err=0 currentPosition=0 10:00:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:18 Filter is already there-color wheel unchanged 10:00:18 Received message from Master: op=Shutter serial=217754 10:00:18 Shutter LASER open 10:00:18 Received message from Camera: op=State serial=217756 10:00:18 GetSingleValue result=40 Value=cccccccc 10:00:18 SkyScan query 10:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:00:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:19 Parameters OK 10:00:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:19 Set A/D data flow result=40 10:00:19 Set A/D channel type result=40 10:00:19 Set A/D encoding result=40 10:00:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:19 Set channel filter=0.000000e+000 result=40 10:00:19 Config A/D Result=40 10:00:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:19 Get A/D filter: -9.255963e+061 result=40 10:00:19 Get A/D value=-858993460 result=40 10:00:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:19 Parameters OK 10:00:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:19 Set A/D data flow result=40 10:00:19 Set A/D channel type result=40 10:00:19 Set A/D encoding result=40 10:00:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:19 Set channel filter=0.000000e+000 result=40 10:00:19 Config A/D Result=40 10:00:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:19 Get A/D filter: -9.255963e+061 result=40 10:00:19 Get A/D value=-858993460 result=40 10:00:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:19 Aux= 10:00:19 Message to Camera, serial 217756 queued 10:00:27 Received message from Master: op=Shutter serial=217766 10:00:27 Shutter LASER close 10:00:28 Received message from Master: op=PointingHead serial=217770 10:00:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:00:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:00:28 Point started: ret=0 10:00:28 point_skyscan result=0 10:00:29 Check angles 10:00:29 SkyScan query 10:00:29 SkyScan query done: ret=0 az=89.61<-5974 ze=156.915<-1539 Statuses=0009 0009 10:00:29 Msec=0 True Az=89.61 Ze=156.915 Az status=0009 Ze status=0009 10:00:30 Check angles 10:00:30 SkyScan query 10:00:30 SkyScan query done: ret=0 az=72.105<-4807 ze=135.945<-2937 Statuses=0009 0009 10:00:30 Msec=750 True Az=72.105 Ze=135.945 Az status=0009 Ze status=0009 10:00:30 Check angles 10:00:30 SkyScan query 10:00:31 SkyScan query done: ret=0 az=54.405<-3627 ze=114.51<-4366 Statuses=0009 0009 10:00:31 Msec=1500 True Az=54.405 Ze=114.51 Az status=0009 Ze status=0009 10:00:31 Check angles 10:00:31 SkyScan query 10:00:32 SkyScan query done: ret=0 az=41.025<-2735 ze=93.615<-5759 Statuses=0009 0009 10:00:32 Msec=2250 True Az=41.025 Ze=93.615 Az status=0009 Ze status=0009 10:00:32 Check angles 10:00:32 SkyScan query 10:00:32 SkyScan query done: ret=0 az=40.98<-2732 ze=72.615<-7159 Statuses=0008 0009 10:00:32 Msec=3000 True Az=40.98 Ze=72.615 Az status=0008 Ze status=0009 10:00:33 Check angles 10:00:33 SkyScan query 10:00:33 SkyScan query done: ret=0 az=40.98<-2732 ze=52.155<-8523 Statuses=0008 0009 10:00:33 Msec=3750 True Az=40.98 Ze=52.155 Az status=0008 Ze status=0009 10:00:33 Check angles 10:00:33 SkyScan query 10:00:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:00:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:00:34 Message to Master queued w/err=0: serial=217770 error=0 10:00:39 Received message from Master: op=Filter serial=217771 10:00:39 Color wheel filter change from 0 to 0 10:00:39 FLIGetFilterPos err=0 currentPosition=0 10:00:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:39 Filter is already there-color wheel unchanged 10:00:39 Received message from Master: op=Shutter serial=217772 10:00:39 Shutter LASER close 10:00:39 Received message from Camera: op=State serial=217774 10:00:39 GetSingleValue result=40 Value=cccccccc 10:00:39 SkyScan query 10:00:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:00:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:40 Parameters OK 10:00:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:40 Set A/D data flow result=40 10:00:40 Set A/D channel type result=40 10:00:40 Set A/D encoding result=40 10:00:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:40 Set channel filter=0.000000e+000 result=40 10:00:40 Config A/D Result=40 10:00:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:40 Get A/D filter: -9.255963e+061 result=40 10:00:40 Get A/D value=-858993460 result=40 10:00:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:40 Parameters OK 10:00:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:40 Set A/D data flow result=40 10:00:40 Set A/D channel type result=40 10:00:40 Set A/D encoding result=40 10:00:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:40 Set channel filter=0.000000e+000 result=40 10:00:40 Config A/D Result=40 10:00:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:40 Get A/D filter: -9.255963e+061 result=40 10:00:40 Get A/D value=-858993460 result=40 10:00:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:40 Aux= 10:00:40 Message to Camera, serial 217774 queued 10:01:17 Received message from Master: op=PointingHead serial=217787 10:01:17 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:01:17 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:01:17 Point started: ret=0 10:01:17 point_skyscan result=0 10:01:18 Check angles 10:01:18 SkyScan query 10:01:18 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 10:01:18 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 10:01:19 Check angles 10:01:19 SkyScan query 10:01:19 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 10:01:19 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 10:01:19 Check angles 10:01:19 SkyScan query 10:01:20 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 10:01:20 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 10:01:20 Check angles 10:01:20 SkyScan query 10:01:21 SkyScan query done: ret=0 az=116.85<-7790 ze=66.495<-7567 Statuses=0009 0008 10:01:21 Msec=2250 True Az=116.85 Ze=66.495 Az status=0009 Ze status=0008 10:01:21 Check angles 10:01:21 SkyScan query 10:01:21 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 10:01:21 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 10:01:22 Check angles 10:01:22 SkyScan query 10:01:22 SkyScan query done: ret=0 az=151.68<-10112 ze=66.495<-7567 Statuses=0009 0008 10:01:22 Msec=3750 True Az=151.68 Ze=66.495 Az status=0009 Ze status=0008 10:01:22 Check angles 10:01:22 SkyScan query 10:01:23 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:01:23 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:01:23 Message to Master queued w/err=0: serial=217787 error=0 10:01:28 Received message from Master: op=Filter serial=217788 10:01:28 Color wheel filter change from 0 to 0 10:01:28 FLIGetFilterPos err=0 currentPosition=0 10:01:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:28 Filter is already there-color wheel unchanged 10:01:28 Received message from Master: op=Shutter serial=217789 10:01:28 Shutter LASER close 10:01:28 Received message from Camera: op=State serial=217791 10:01:28 GetSingleValue result=40 Value=cccccccc 10:01:28 SkyScan query 10:01:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:01:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:29 Parameters OK 10:01:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:29 Set A/D data flow result=40 10:01:29 Set A/D channel type result=40 10:01:29 Set A/D encoding result=40 10:01:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:29 Set channel filter=0.000000e+000 result=40 10:01:29 Config A/D Result=40 10:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:29 Get A/D filter: -9.255963e+061 result=40 10:01:29 Get A/D value=-858993460 result=40 10:01:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:29 Parameters OK 10:01:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:29 Set A/D data flow result=40 10:01:29 Set A/D channel type result=40 10:01:29 Set A/D encoding result=40 10:01:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:29 Set channel filter=0.000000e+000 result=40 10:01:29 Config A/D Result=40 10:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:29 Get A/D filter: -9.255963e+061 result=40 10:01:29 Get A/D value=-858993460 result=40 10:01:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:29 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:29 Aux= 10:01:29 Message to Camera, serial 217791 queued 10:02:06 Received message from Master: op=PointingHead serial=217804 10:02:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:02:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:02:06 Point started: ret=0 10:02:06 point_skyscan result=0 10:02:07 Check angles 10:02:07 SkyScan query 10:02:07 SkyScan query done: ret=0 az=134.55<-8970 ze=36.165<-9589 Statuses=0009 0009 10:02:07 Msec=0 True Az=134.55 Ze=36.165 Az status=0009 Ze status=0009 10:02:07 Check angles 10:02:07 SkyScan query 10:02:08 SkyScan query done: ret=0 az=117.075<-7805 ze=15.24<-10984 Statuses=0009 0009 10:02:08 Msec=750 True Az=117.075 Ze=15.24 Az status=0009 Ze status=0009 10:02:08 Check angles 10:02:08 SkyScan query 10:02:09 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.76<-12384 Statuses=0009 0009 10:02:09 Msec=1500 True Az=99.66 Ze=-5.76 Az status=0009 Ze status=0009 10:02:09 Check angles 10:02:09 SkyScan query 10:02:10 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.7<-13780 Statuses=0009 0009 10:02:10 Msec=2250 True Az=82.125 Ze=-26.7 Az status=0009 Ze status=0009 10:02:10 Check angles 10:02:10 SkyScan query 10:02:10 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.595<-14573 Statuses=0009 0008 10:02:10 Msec=3000 True Az=64.695 Ze=-38.595 Az status=0009 Ze status=0008 10:02:10 Check angles 10:02:10 SkyScan query 10:02:11 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 10:02:11 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 10:02:11 Check angles 10:02:11 SkyScan query 10:02:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:02:12 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:02:12 Message to Master queued w/err=0: serial=217804 error=0 10:02:17 Received message from Master: op=Filter serial=217805 10:02:17 Color wheel filter change from 0 to 0 10:02:17 FLIGetFilterPos err=0 currentPosition=0 10:02:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:17 Filter is already there-color wheel unchanged 10:02:17 Received message from Master: op=Shutter serial=217806 10:02:17 Shutter LASER close 10:02:17 Received message from Camera: op=State serial=217808 10:02:17 GetSingleValue result=40 Value=cccccccc 10:02:17 SkyScan query 10:02:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:02:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:18 Parameters OK 10:02:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:18 Set A/D data flow result=40 10:02:18 Set A/D channel type result=40 10:02:18 Set A/D encoding result=40 10:02:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:18 Set channel filter=0.000000e+000 result=40 10:02:18 Config A/D Result=40 10:02:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:18 Get A/D filter: -9.255963e+061 result=40 10:02:18 Get A/D value=-858993460 result=40 10:02:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:18 Parameters OK 10:02:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:18 Set A/D data flow result=40 10:02:18 Set A/D channel type result=40 10:02:18 Set A/D encoding result=40 10:02:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:18 Set channel filter=0.000000e+000 result=40 10:02:18 Config A/D Result=40 10:02:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:18 Get A/D filter: -9.255963e+061 result=40 10:02:18 Get A/D value=-858993460 result=40 10:02:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:18 Aux= 10:02:18 Message to Camera, serial 217808 queued 10:02:54 Received message from Master: op=PointingHead serial=217821 10:02:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:02:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:02:55 Point started: ret=0 10:02:55 point_skyscan result=0 10:02:55 Check angles 10:02:55 SkyScan query 10:02:56 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.52<-16568 Statuses=0009 0009 10:02:56 Msec=0 True Az=64.245 Ze=-68.52 Az status=0009 Ze status=0009 10:02:56 Check angles 10:02:56 SkyScan query 10:02:57 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.52<-17968 Statuses=0009 0009 10:02:57 Msec=750 True Az=81.555 Ze=-89.52 Az status=0009 Ze status=0009 10:02:57 Check angles 10:02:57 SkyScan query 10:02:58 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.475<-19365 Statuses=0009 0009 10:02:58 Msec=1500 True Az=99.12 Ze=-110.475 Az status=0009 Ze status=0009 10:02:58 Check angles 10:02:58 SkyScan query 10:02:58 SkyScan query done: ret=0 az=116.58<-7772 ze=-131.4<-20760 Statuses=0009 0009 10:02:58 Msec=2250 True Az=116.58 Ze=-131.4 Az status=0009 Ze status=0009 10:02:58 Check angles 10:02:58 SkyScan query 10:02:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 10:02:59 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 10:02:59 Check angles 10:02:59 SkyScan query 10:03:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:03:00 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:03:00 Message to Master queued w/err=0: serial=217821 error=0 10:03:05 Received message from Master: op=Filter serial=217822 10:03:05 Color wheel filter change from 0 to 0 10:03:05 FLIGetFilterPos err=0 currentPosition=0 10:03:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:05 Filter is already there-color wheel unchanged 10:03:05 Received message from Master: op=Shutter serial=217823 10:03:05 Shutter LASER close 10:03:05 Received message from Camera: op=State serial=217825 10:03:05 GetSingleValue result=40 Value=cccccccc 10:03:05 SkyScan query 10:03:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:03:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:06 Parameters OK 10:03:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:06 Set A/D data flow result=40 10:03:06 Set A/D channel type result=40 10:03:06 Set A/D encoding result=40 10:03:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:06 Set channel filter=0.000000e+000 result=40 10:03:06 Config A/D Result=40 10:03:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:06 Get A/D filter: -9.255963e+061 result=40 10:03:06 Get A/D value=-858993460 result=40 10:03:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:06 Parameters OK 10:03:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:06 Set A/D data flow result=40 10:03:06 Set A/D channel type result=40 10:03:06 Set A/D encoding result=40 10:03:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:06 Set channel filter=0.000000e+000 result=40 10:03:06 Config A/D Result=40 10:03:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:06 Get A/D filter: -9.255963e+061 result=40 10:03:06 Get A/D value=-858993460 result=40 10:03:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:06 Aux= 10:03:06 Message to Camera, serial 217825 queued 10:03:43 Received message from Master: op=PointingHead serial=217838 10:03:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:03:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:03:43 Point started: ret=0 10:03:43 point_skyscan result=0 10:03:44 Check angles 10:03:44 SkyScan query 10:03:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.315<-23421 Statuses=0009 0009 10:03:44 Msec=0 True Az=112.995 Ze=-171.315 Az status=0009 Ze status=0009 10:03:44 Check angles 10:03:44 SkyScan query 10:03:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:03:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:03:45 Message to Master queued w/err=0: serial=217838 error=0 10:03:50 Received message from Master: op=Filter serial=217839 10:03:50 Color wheel filter change from 0 to 0 10:03:50 FLIGetFilterPos err=0 currentPosition=0 10:03:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:50 Filter is already there-color wheel unchanged 10:03:50 Received message from Master: op=Shutter serial=217840 10:03:50 Shutter LASER open 10:03:50 Received message from Camera: op=State serial=217842 10:03:50 GetSingleValue result=40 Value=cccccccc 10:03:50 SkyScan query 10:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:03:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:51 Parameters OK 10:03:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:51 Set A/D data flow result=40 10:03:51 Set A/D channel type result=40 10:03:51 Set A/D encoding result=40 10:03:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:51 Set channel filter=0.000000e+000 result=40 10:03:51 Config A/D Result=40 10:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:51 Get A/D filter: -9.255963e+061 result=40 10:03:51 Get A/D value=-858993460 result=40 10:03:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:51 Parameters OK 10:03:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:51 Set A/D data flow result=40 10:03:51 Set A/D channel type result=40 10:03:51 Set A/D encoding result=40 10:03:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:51 Set channel filter=0.000000e+000 result=40 10:03:51 Config A/D Result=40 10:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:51 Get A/D filter: -9.255963e+061 result=40 10:03:51 Get A/D value=-858993460 result=40 10:03:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:51 Aux= 10:03:51 Message to Camera, serial 217842 queued 10:03:59 Received message from Master: op=Shutter serial=217852 10:03:59 Shutter LASER close 10:04:00 Received message from Master: op=PointingHead serial=217856 10:04:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:04:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:04:00 Point started: ret=0 10:04:00 point_skyscan result=0 10:04:01 Check angles 10:04:01 SkyScan query 10:04:02 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.755<-21517 Statuses=0009 0009 10:04:02 Msec=0 True Az=136.365 Ze=-142.755 Az status=0009 Ze status=0009 10:04:02 Check angles 10:04:02 SkyScan query 10:04:02 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.785<-20119 Statuses=0009 0009 10:04:02 Msec=750 True Az=153.825 Ze=-121.785 Az status=0009 Ze status=0009 10:04:03 Check angles 10:04:03 SkyScan query 10:04:03 SkyScan query done: ret=0 az=171.72<-11448 ze=-100.275<-18685 Statuses=0009 0009 10:04:03 Msec=1500 True Az=171.72 Ze=-100.275 Az status=0009 Ze status=0009 10:04:03 Check angles 10:04:03 SkyScan query 10:04:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.41<-17294 Statuses=0008 0009 10:04:04 Msec=2250 True Az=176.01 Ze=-79.41 Az status=0008 Ze status=0009 10:04:04 Check angles 10:04:04 SkyScan query 10:04:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.425<-15895 Statuses=0008 0009 10:04:05 Msec=3000 True Az=176.01 Ze=-58.425 Az status=0008 Ze status=0009 10:04:05 Check angles 10:04:05 SkyScan query 10:04:05 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 10:04:05 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 10:04:05 Message to Master queued w/err=0: serial=217856 error=0 10:04:10 Received message from Master: op=Filter serial=217857 10:04:10 Color wheel filter change from 0 to 0 10:04:10 FLIGetFilterPos err=0 currentPosition=0 10:04:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:10 Filter is already there-color wheel unchanged 10:04:11 Received message from Master: op=Shutter serial=217858 10:04:11 Shutter LASER close 10:04:11 Received message from Camera: op=State serial=217860 10:04:11 GetSingleValue result=40 Value=cccccccc 10:04:11 SkyScan query 10:04:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:04:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:11 Parameters OK 10:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:11 Set A/D data flow result=40 10:04:11 Set A/D channel type result=40 10:04:11 Set A/D encoding result=40 10:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:11 Set channel filter=0.000000e+000 result=40 10:04:11 Config A/D Result=40 10:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:11 Get A/D filter: -9.255963e+061 result=40 10:04:11 Get A/D value=-858993460 result=40 10:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:11 Parameters OK 10:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:11 Set A/D data flow result=40 10:04:11 Set A/D channel type result=40 10:04:11 Set A/D encoding result=40 10:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:11 Set channel filter=0.000000e+000 result=40 10:04:11 Config A/D Result=40 10:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:11 Get A/D filter: -9.255963e+061 result=40 10:04:11 Get A/D value=-858993460 result=40 10:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:11 Aux= 10:04:11 Message to Camera, serial 217860 queued 10:04:48 Received message from Master: op=PointingHead serial=217873 10:04:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:04:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:04:48 Point started: ret=0 10:04:48 point_skyscan result=0 10:04:49 Check angles 10:04:49 SkyScan query 10:04:50 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.54<-13436 Statuses=0009 0009 10:04:50 Msec=0 True Az=152.745 Ze=-21.54 Az status=0009 Ze status=0009 10:04:50 Check angles 10:04:50 SkyScan query 10:04:51 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.525<-12035 Statuses=0009 0009 10:04:51 Msec=750 True Az=135.39 Ze=-0.525 Az status=0009 Ze status=0009 10:04:51 Check angles 10:04:51 SkyScan query 10:04:51 SkyScan query done: ret=0 az=117.45<-7830 ze=20.82<-10612 Statuses=0009 0009 10:04:51 Msec=1500 True Az=117.45 Ze=20.82 Az status=0009 Ze status=0009 10:04:51 Check angles 10:04:51 SkyScan query 10:04:52 SkyScan query done: ret=0 az=100.065<-6671 ze=41.775<-9215 Statuses=0009 0009 10:04:52 Msec=2250 True Az=100.065 Ze=41.775 Az status=0009 Ze status=0009 10:04:52 Check angles 10:04:52 SkyScan query 10:04:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 10:04:53 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 10:04:53 Check angles 10:04:53 SkyScan query 10:04:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:04:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:04:54 Message to Master queued w/err=0: serial=217873 error=0 10:04:59 Received message from Master: op=Filter serial=217874 10:04:59 Color wheel filter change from 0 to 0 10:04:59 FLIGetFilterPos err=0 currentPosition=0 10:04:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:59 Filter is already there-color wheel unchanged 10:04:59 Received message from Master: op=Shutter serial=217875 10:04:59 Shutter LASER close 10:04:59 Received message from Camera: op=State serial=217877 10:04:59 GetSingleValue result=40 Value=cccccccc 10:04:59 SkyScan query 10:04:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:04:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:59 Parameters OK 10:04:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:59 Set A/D data flow result=40 10:04:59 Set A/D channel type result=40 10:04:59 Set A/D encoding result=40 10:04:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:59 Set channel filter=0.000000e+000 result=40 10:04:59 Config A/D Result=40 10:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:59 Get A/D filter: -9.255963e+061 result=40 10:04:59 Get A/D value=-858993460 result=40 10:04:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:59 Parameters OK 10:04:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:59 Set A/D data flow result=40 10:04:59 Set A/D channel type result=40 10:04:59 Set A/D encoding result=40 10:04:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:59 Set channel filter=0.000000e+000 result=40 10:04:59 Config A/D Result=40 10:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:59 Get A/D filter: -9.255963e+061 result=40 10:04:59 Get A/D value=-858993460 result=40 10:04:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:59 Aux= 10:04:59 Message to Camera, serial 217877 queued 10:05:36 Received message from Master: op=PointingHead serial=217890 10:05:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:05:36 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:05:37 Point started: ret=0 10:05:37 point_skyscan result=0 10:05:37 Check angles 10:05:37 SkyScan query 10:05:38 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 10:05:38 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 10:05:38 Check angles 10:05:38 SkyScan query 10:05:39 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 10:05:39 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 10:05:39 Check angles 10:05:39 SkyScan query 10:05:39 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 10:05:39 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 10:05:40 Check angles 10:05:40 SkyScan query 10:05:40 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 10:05:40 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 10:05:40 Check angles 10:05:40 SkyScan query 10:05:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:05:41 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:05:41 Check angles 10:05:41 SkyScan query 10:05:42 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:05:42 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:05:42 Message to Master queued w/err=0: serial=217890 error=0 10:05:47 Received message from Master: op=Filter serial=217891 10:05:47 Color wheel filter change from 0 to 0 10:05:47 FLIGetFilterPos err=0 currentPosition=0 10:05:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:47 Filter is already there-color wheel unchanged 10:05:47 Received message from Master: op=Shutter serial=217892 [UTC 2018-12-17 10:05:47] 10:05:47 Shutter LASER close 10:05:47 Received message from Camera: op=State serial=217894 10:05:47 GetSingleValue result=40 Value=cccccccc 10:05:47 SkyScan query 10:05:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:05:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:47 Parameters OK 10:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:47 Set A/D data flow result=40 10:05:47 Set A/D channel type result=40 10:05:47 Set A/D encoding result=40 10:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:47 Set channel filter=0.000000e+000 result=40 10:05:47 Config A/D Result=40 10:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:47 Get A/D filter: -9.255963e+061 result=40 10:05:47 Get A/D value=-858993460 result=40 10:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:47 Parameters OK 10:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:47 Set A/D data flow result=40 10:05:47 Set A/D channel type result=40 10:05:47 Set A/D encoding result=40 10:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:47 Set channel filter=0.000000e+000 result=40 10:05:47 Config A/D Result=40 10:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:47 Get A/D filter: -9.255963e+061 result=40 10:05:47 Get A/D value=-858993460 result=40 10:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:47 Aux= 10:05:47 Message to Camera, serial 217894 queued 10:06:24 Received message from Master: op=PointingHead serial=217907 10:06:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:06:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:06:25 Point started: ret=0 10:06:25 point_skyscan result=0 10:06:25 Check angles 10:06:25 SkyScan query 10:06:26 SkyScan query done: ret=0 az=152.775<-10185 ze=8.355<-11443 Statuses=0009 0009 10:06:26 Msec=0 True Az=152.775 Ze=8.355 Az status=0009 Ze status=0009 10:06:26 Check angles 10:06:26 SkyScan query 10:06:27 SkyScan query done: ret=0 az=134.88<-8992 ze=-13.05<-12870 Statuses=0009 0009 10:06:27 Msec=750 True Az=134.88 Ze=-13.05 Az status=0009 Ze status=0009 10:06:27 Check angles 10:06:27 SkyScan query 10:06:27 SkyScan query done: ret=0 az=117.375<-7825 ze=-34.02<-14268 Statuses=0009 0009 10:06:27 Msec=1500 True Az=117.375 Ze=-34.02 Az status=0009 Ze status=0009 10:06:28 Check angles 10:06:28 SkyScan query 10:06:28 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.57<-15438 Statuses=0009 0009 10:06:28 Msec=2250 True Az=100.05 Ze=-51.57 Az status=0009 Ze status=0009 10:06:28 Check angles 10:06:28 SkyScan query 10:06:29 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 10:06:29 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 10:06:29 Check angles 10:06:29 SkyScan query 10:06:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:06:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:06:30 Message to Master queued w/err=0: serial=217907 error=0 10:06:35 Received message from Master: op=Filter serial=217908 10:06:35 Color wheel filter change from 0 to 0 10:06:35 FLIGetFilterPos err=0 currentPosition=0 10:06:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:35 Filter is already there-color wheel unchanged 10:06:35 Received message from Master: op=Shutter serial=217909 10:06:35 Shutter LASER close 10:06:35 Received message from Camera: op=State serial=217911 10:06:35 GetSingleValue result=40 Value=cccccccc 10:06:35 SkyScan query 10:06:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:06:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:36 Parameters OK 10:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:36 Set A/D data flow result=40 10:06:36 Set A/D channel type result=40 10:06:36 Set A/D encoding result=40 10:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:36 Set channel filter=0.000000e+000 result=40 10:06:36 Config A/D Result=40 10:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:36 Get A/D filter: -9.255963e+061 result=40 10:06:36 Get A/D value=-858993460 result=40 10:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:36 Parameters OK 10:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:36 Set A/D data flow result=40 10:06:36 Set A/D channel type result=40 10:06:36 Set A/D encoding result=40 10:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:36 Set channel filter=0.000000e+000 result=40 10:06:36 Config A/D Result=40 10:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:36 Get A/D filter: -9.255963e+061 result=40 10:06:36 Get A/D value=-858993460 result=40 10:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:36 Aux= 10:06:36 Message to Camera, serial 217911 queued 10:07:11 Received message from Master: op=PointingHead serial=217923 10:07:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:07:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:07:12 Point started: ret=0 10:07:12 point_skyscan result=0 10:07:12 Check angles 10:07:12 SkyScan query 10:07:13 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.135<-17409 Statuses=0009 0009 10:07:13 Msec=0 True Az=108.855 Ze=-81.135 Az status=0009 Ze status=0009 10:07:13 Check angles 10:07:13 SkyScan query 10:07:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 10:07:14 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 10:07:14 Check angles 10:07:14 SkyScan query 10:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.96<-20264 Statuses=0008 0009 10:07:15 Msec=1500 True Az=112.995 Ze=-123.96 Az status=0008 Ze status=0009 10:07:15 Check angles 10:07:15 SkyScan query 10:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.785<-21719 Statuses=0008 0009 10:07:15 Msec=2250 True Az=112.995 Ze=-145.785 Az status=0008 Ze status=0009 10:07:16 Check angles 10:07:16 SkyScan query 10:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.26<-23084 Statuses=0008 0009 10:07:16 Msec=3000 True Az=112.995 Ze=-166.26 Az status=0008 Ze status=0009 10:07:16 Check angles 10:07:16 SkyScan query 10:07:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:07:17 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:07:17 Message to Master queued w/err=0: serial=217923 error=0 10:07:22 Received message from Master: op=Filter serial=217924 10:07:22 Color wheel filter change from 0 to 0 10:07:22 FLIGetFilterPos err=0 currentPosition=0 10:07:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:22 Filter is already there-color wheel unchanged 10:07:22 Received message from Master: op=Shutter serial=217925 10:07:22 Shutter LASER open 10:07:22 Received message from Camera: op=State serial=217927 10:07:22 GetSingleValue result=40 Value=cccccccc 10:07:22 SkyScan query 10:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:07:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:23 Parameters OK 10:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:23 Set A/D data flow result=40 10:07:23 Set A/D channel type result=40 10:07:23 Set A/D encoding result=40 10:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:23 Set channel filter=0.000000e+000 result=40 10:07:23 Config A/D Result=40 10:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:23 Get A/D filter: -9.255963e+061 result=40 10:07:23 Get A/D value=-858993460 result=40 10:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:23 Parameters OK 10:07:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:23 Set A/D data flow result=40 10:07:23 Set A/D channel type result=40 10:07:23 Set A/D encoding result=40 10:07:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:23 Set channel filter=0.000000e+000 result=40 10:07:23 Config A/D Result=40 10:07:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:23 Get A/D filter: -9.255963e+061 result=40 10:07:23 Get A/D value=-858993460 result=40 10:07:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:23 Aux= 10:07:23 Message to Camera, serial 217927 queued 10:07:31 Received message from Master: op=Shutter serial=217937 10:07:31 Shutter LASER close 10:07:32 Received message from Master: op=PointingHead serial=217941 10:07:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:07:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:07:32 Point started: ret=0 10:07:32 point_skyscan result=0 10:07:33 Check angles 10:07:33 SkyScan query 10:07:33 SkyScan query done: ret=0 az=89.46<-5964 ze=156.825<-1545 Statuses=0009 0009 10:07:33 Msec=0 True Az=89.46 Ze=156.825 Az status=0009 Ze status=0009 10:07:34 Check angles 10:07:34 SkyScan query 10:07:34 SkyScan query done: ret=0 az=72<-4800 ze=135.87<-2942 Statuses=0009 0009 10:07:34 Msec=750 True Az=72 Ze=135.87 Az status=0009 Ze status=0009 10:07:34 Check angles 10:07:34 SkyScan query 10:07:35 SkyScan query done: ret=0 az=54.63<-3642 ze=114.915<-4339 Statuses=0009 0009 10:07:35 Msec=1500 True Az=54.63 Ze=114.915 Az status=0009 Ze status=0009 10:07:35 Check angles 10:07:35 SkyScan query 10:07:36 SkyScan query done: ret=0 az=41.025<-2735 ze=93.945<-5737 Statuses=0009 0009 10:07:36 Msec=2250 True Az=41.025 Ze=93.945 Az status=0009 Ze status=0009 10:07:36 Check angles 10:07:36 SkyScan query 10:07:36 SkyScan query done: ret=0 az=40.98<-2732 ze=72.96<-7136 Statuses=0008 0009 10:07:36 Msec=3000 True Az=40.98 Ze=72.96 Az status=0008 Ze status=0009 10:07:37 Check angles 10:07:37 SkyScan query 10:07:37 SkyScan query done: ret=0 az=40.98<-2732 ze=52.32<-8512 Statuses=0008 0009 10:07:37 Msec=3750 True Az=40.98 Ze=52.32 Az status=0008 Ze status=0009 10:07:37 Check angles 10:07:37 SkyScan query 10:07:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:07:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:07:38 Message to Master queued w/err=0: serial=217941 error=0 10:07:43 Received message from Master: op=Filter serial=217942 10:07:43 Color wheel filter change from 0 to 0 10:07:43 FLIGetFilterPos err=0 currentPosition=0 10:07:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:43 Filter is already there-color wheel unchanged 10:07:43 Received message from Master: op=Shutter serial=217943 10:07:43 Shutter LASER close 10:07:43 Received message from Camera: op=State serial=217945 10:07:43 GetSingleValue result=40 Value=cccccccc 10:07:43 SkyScan query 10:07:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:07:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:44 Parameters OK 10:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:44 Set A/D data flow result=40 10:07:44 Set A/D channel type result=40 10:07:44 Set A/D encoding result=40 10:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:44 Set channel filter=0.000000e+000 result=40 10:07:44 Config A/D Result=40 10:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:44 Get A/D filter: -9.255963e+061 result=40 10:07:44 Get A/D value=-858993460 result=40 10:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:44 Parameters OK 10:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:44 Set A/D data flow result=40 10:07:44 Set A/D channel type result=40 10:07:44 Set A/D encoding result=40 10:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:44 Set channel filter=0.000000e+000 result=40 10:07:44 Config A/D Result=40 10:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:44 Get A/D filter: -9.255963e+061 result=40 10:07:44 Get A/D value=-858993460 result=40 10:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:44 Aux= 10:07:44 Message to Camera, serial 217945 queued 10:08:21 Received message from Master: op=PointingHead serial=217958 10:08:21 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:08:21 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:08:21 Point started: ret=0 10:08:21 point_skyscan result=0 10:08:22 Check angles 10:08:22 SkyScan query 10:08:22 SkyScan query done: ret=0 az=63.84<-4256 ze=66.54<-7564 Statuses=0009 0008 10:08:22 Msec=0 True Az=63.84 Ze=66.54 Az status=0009 Ze status=0008 10:08:23 Check angles 10:08:23 SkyScan query 10:08:23 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 10:08:23 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 10:08:23 Check angles 10:08:23 SkyScan query 10:08:24 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 10:08:24 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 10:08:24 Check angles 10:08:24 SkyScan query 10:08:25 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 10:08:25 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 10:08:25 Check angles 10:08:25 SkyScan query 10:08:25 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 10:08:25 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 10:08:26 Check angles 10:08:26 SkyScan query 10:08:26 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 10:08:26 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 10:08:26 Check angles 10:08:26 SkyScan query 10:08:27 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:08:27 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:08:27 Message to Master queued w/err=0: serial=217958 error=0 10:08:32 Received message from Master: op=Filter serial=217959 10:08:32 Color wheel filter change from 0 to 0 10:08:32 FLIGetFilterPos err=0 currentPosition=0 10:08:32 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:32 Filter is already there-color wheel unchanged 10:08:32 Received message from Master: op=Shutter serial=217960 10:08:32 Shutter LASER close 10:08:32 Received message from Camera: op=State serial=217962 10:08:32 GetSingleValue result=40 Value=cccccccc 10:08:32 SkyScan query 10:08:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:08:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:33 Parameters OK 10:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:33 Set A/D data flow result=40 10:08:33 Set A/D channel type result=40 10:08:33 Set A/D encoding result=40 10:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:33 Set channel filter=0.000000e+000 result=40 10:08:33 Config A/D Result=40 10:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:33 Get A/D filter: -9.255963e+061 result=40 10:08:33 Get A/D value=-858993460 result=40 10:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:33 Parameters OK 10:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:33 Set A/D data flow result=40 10:08:33 Set A/D channel type result=40 10:08:33 Set A/D encoding result=40 10:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:33 Set channel filter=0.000000e+000 result=40 10:08:33 Config A/D Result=40 10:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:33 Get A/D filter: -9.255963e+061 result=40 10:08:33 Get A/D value=-858993460 result=40 10:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:33 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:33 Aux= 10:08:33 Message to Camera, serial 217962 queued 10:09:10 Received message from Master: op=PointingHead serial=217975 10:09:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:09:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:09:10 Point started: ret=0 10:09:10 point_skyscan result=0 10:09:11 Check angles 10:09:11 SkyScan query 10:09:11 SkyScan query done: ret=0 az=134.805<-8987 ze=36.66<-9556 Statuses=0009 0009 10:09:11 Msec=0 True Az=134.805 Ze=36.66 Az status=0009 Ze status=0009 10:09:11 Check angles 10:09:11 SkyScan query 10:09:12 SkyScan query done: ret=0 az=117.285<-7819 ze=15.69<-10954 Statuses=0009 0009 10:09:12 Msec=750 True Az=117.285 Ze=15.69 Az status=0009 Ze status=0009 10:09:12 Check angles 10:09:12 SkyScan query 10:09:13 SkyScan query done: ret=0 az=100.065<-6671 ze=-5.25<-12350 Statuses=0009 0009 10:09:13 Msec=1500 True Az=100.065 Ze=-5.25 Az status=0009 Ze status=0009 10:09:13 Check angles 10:09:13 SkyScan query 10:09:13 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.67<-13778 Statuses=0009 0009 10:09:13 Msec=2250 True Az=82.155 Ze=-26.67 Az status=0009 Ze status=0009 10:09:14 Check angles 10:09:14 SkyScan query 10:09:14 SkyScan query done: ret=0 az=64.56<-4304 ze=-38.58<-14572 Statuses=0009 0008 10:09:14 Msec=3000 True Az=64.56 Ze=-38.58 Az status=0009 Ze status=0008 10:09:14 Check angles 10:09:14 SkyScan query 10:09:15 SkyScan query done: ret=0 az=47.31<-3154 ze=-38.52<-14568 Statuses=0009 0008 10:09:15 Msec=3750 True Az=47.31 Ze=-38.52 Az status=0009 Ze status=0008 10:09:15 Check angles 10:09:15 SkyScan query 10:09:16 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 10:09:16 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 10:09:16 Message to Master queued w/err=0: serial=217975 error=0 10:09:21 Received message from Master: op=Filter serial=217976 10:09:21 Color wheel filter change from 0 to 0 10:09:21 FLIGetFilterPos err=0 currentPosition=0 10:09:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:21 Filter is already there-color wheel unchanged 10:09:21 Received message from Master: op=Shutter serial=217977 10:09:21 Shutter LASER close 10:09:21 Received message from Camera: op=State serial=217979 10:09:21 GetSingleValue result=40 Value=cccccccc 10:09:21 SkyScan query 10:09:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:09:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:22 Parameters OK 10:09:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:22 Set A/D data flow result=40 10:09:22 Set A/D channel type result=40 10:09:22 Set A/D encoding result=40 10:09:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:22 Set channel filter=0.000000e+000 result=40 10:09:22 Config A/D Result=40 10:09:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:22 Get A/D filter: -9.255963e+061 result=40 10:09:22 Get A/D value=-858993460 result=40 10:09:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:22 Parameters OK 10:09:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:22 Set A/D data flow result=40 10:09:22 Set A/D channel type result=40 10:09:22 Set A/D encoding result=40 10:09:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:22 Set channel filter=0.000000e+000 result=40 10:09:22 Config A/D Result=40 10:09:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:22 Get A/D filter: -9.255963e+061 result=40 10:09:22 Get A/D value=-858993460 result=40 10:09:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:22 Aux= 10:09:22 Message to Camera, serial 217979 queued 10:09:58 Received message from Master: op=PointingHead serial=217992 10:09:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:09:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:09:59 Point started: ret=0 10:09:59 point_skyscan result=0 10:09:59 Check angles 10:09:59 SkyScan query 10:10:00 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.55<-16570 Statuses=0009 0009 10:10:00 Msec=0 True Az=64.245 Ze=-68.55 Az status=0009 Ze status=0009 10:10:00 Check angles 10:10:00 SkyScan query 10:10:01 SkyScan query done: ret=0 az=82.125<-5475 ze=-89.955<-17997 Statuses=0009 0009 10:10:01 Msec=750 True Az=82.125 Ze=-89.955 Az status=0009 Ze status=0009 10:10:01 Check angles 10:10:01 SkyScan query 10:10:02 SkyScan query done: ret=0 az=99.645<-6643 ze=-110.91<-19394 Statuses=0009 0009 10:10:02 Msec=1500 True Az=99.645 Ze=-110.91 Az status=0009 Ze status=0009 10:10:02 Check angles 10:10:02 SkyScan query 10:10:02 SkyScan query done: ret=0 az=117<-7800 ze=-131.805<-20787 Statuses=0009 0009 10:10:02 Msec=2250 True Az=117 Ze=-131.805 Az status=0009 Ze status=0009 10:10:02 Check angles 10:10:02 SkyScan query 10:10:03 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 10:10:03 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 10:10:03 Check angles 10:10:03 SkyScan query 10:10:04 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:10:04 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:10:04 Message to Master queued w/err=0: serial=217992 error=0 10:10:09 Received message from Master: op=Filter serial=217993 10:10:09 Color wheel filter change from 0 to 0 10:10:09 FLIGetFilterPos err=0 currentPosition=0 10:10:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:09 Filter is already there-color wheel unchanged 10:10:09 Received message from Master: op=Shutter serial=217994 10:10:09 Shutter LASER close 10:10:09 Received message from Camera: op=State serial=217996 10:10:09 GetSingleValue result=40 Value=cccccccc 10:10:09 SkyScan query 10:10:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:10:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:10 Parameters OK 10:10:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:10 Set A/D data flow result=40 10:10:10 Set A/D channel type result=40 10:10:10 Set A/D encoding result=40 10:10:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:10 Set channel filter=0.000000e+000 result=40 10:10:10 Config A/D Result=40 10:10:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:10 Get A/D filter: -9.255963e+061 result=40 10:10:10 Get A/D value=-858993460 result=40 10:10:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:10 Parameters OK 10:10:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:10 Set A/D data flow result=40 10:10:10 Set A/D channel type result=40 10:10:10 Set A/D encoding result=40 10:10:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:10 Set channel filter=0.000000e+000 result=40 10:10:10 Config A/D Result=40 10:10:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:10 Get A/D filter: -9.255963e+061 result=40 10:10:10 Get A/D value=-858993460 result=40 10:10:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:10 Aux= 10:10:10 Message to Camera, serial 217996 queued 10:10:46 Received message from Master: op=PointingHead serial=218009 10:10:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:10:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:10:47 Point started: ret=0 10:10:47 point_skyscan result=0 10:10:48 Check angles 10:10:48 SkyScan query 10:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.375<-23425 Statuses=0009 0009 10:10:48 Msec=0 True Az=112.995 Ze=-171.375 Az status=0009 Ze status=0009 10:10:48 Check angles 10:10:48 SkyScan query 10:10:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:10:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:10:49 Message to Master queued w/err=0: serial=218009 error=0 10:10:54 Received message from Master: op=Filter serial=218010 10:10:54 Color wheel filter change from 0 to 0 10:10:54 FLIGetFilterPos err=0 currentPosition=0 10:10:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:54 Filter is already there-color wheel unchanged 10:10:54 Received message from Master: op=Shutter serial=218011 10:10:54 Shutter LASER open 10:10:54 Received message from Camera: op=State serial=218013 10:10:54 GetSingleValue result=40 Value=cccccccc 10:10:54 SkyScan query 10:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:10:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:55 Parameters OK 10:10:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:55 Set A/D data flow result=40 10:10:55 Set A/D channel type result=40 10:10:55 Set A/D encoding result=40 10:10:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:55 Set channel filter=0.000000e+000 result=40 10:10:55 Config A/D Result=40 10:10:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:55 Get A/D filter: -9.255963e+061 result=40 10:10:55 Get A/D value=-858993460 result=40 10:10:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:55 Parameters OK 10:10:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:55 Set A/D data flow result=40 10:10:55 Set A/D channel type result=40 10:10:55 Set A/D encoding result=40 10:10:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:55 Set channel filter=0.000000e+000 result=40 10:10:55 Config A/D Result=40 10:10:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:55 Get A/D filter: -9.255963e+061 result=40 10:10:55 Get A/D value=-858993460 result=40 10:10:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:55 Aux= 10:10:55 Message to Camera, serial 218013 queued 10:11:03 Received message from Master: op=Shutter serial=218023 10:11:03 Shutter LASER close 10:11:04 Received message from Master: op=PointingHead serial=218027 10:11:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:11:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:11:04 Point started: ret=0 10:11:04 point_skyscan result=0 10:11:05 Check angles 10:11:05 SkyScan query 10:11:05 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.4<-21560 Statuses=0009 0009 10:11:05 Msec=0 True Az=135.81 Ze=-143.4 Az status=0009 Ze status=0009 10:11:06 Check angles 10:11:06 SkyScan query 10:11:06 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.98<-20132 Statuses=0009 0009 10:11:06 Msec=750 True Az=153.69 Ze=-121.98 Az status=0009 Ze status=0009 10:11:06 Check angles 10:11:06 SkyScan query 10:11:07 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.04<-18736 Statuses=0009 0009 10:11:07 Msec=1500 True Az=171.195 Ze=-101.04 Az status=0009 Ze status=0009 10:11:07 Check angles 10:11:07 SkyScan query 10:11:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.115<-17341 Statuses=0008 0009 10:11:08 Msec=2250 True Az=175.995 Ze=-80.115 Az status=0008 Ze status=0009 10:11:08 Check angles 10:11:08 SkyScan query 10:11:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.1<-15940 Statuses=0008 0009 10:11:08 Msec=3000 True Az=175.995 Ze=-59.1 Az status=0008 Ze status=0009 10:11:09 Check angles 10:11:09 SkyScan query 10:11:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:11:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:11:09 Message to Master queued w/err=0: serial=218027 error=0 10:11:14 Received message from Master: op=Filter serial=218028 10:11:14 Color wheel filter change from 0 to 0 10:11:14 FLIGetFilterPos err=0 currentPosition=0 10:11:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:14 Filter is already there-color wheel unchanged 10:11:14 Received message from Master: op=Shutter serial=218029 10:11:14 Shutter LASER close 10:11:15 Received message from Camera: op=State serial=218031 10:11:15 GetSingleValue result=40 Value=cccccccc 10:11:15 SkyScan query 10:11:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:11:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:15 Parameters OK 10:11:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:15 Set A/D data flow result=40 10:11:15 Set A/D channel type result=40 10:11:15 Set A/D encoding result=40 10:11:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:15 Set channel filter=0.000000e+000 result=40 10:11:15 Config A/D Result=40 10:11:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:15 Get A/D filter: -9.255963e+061 result=40 10:11:15 Get A/D value=-858993460 result=40 10:11:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:15 Parameters OK 10:11:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:15 Set A/D data flow result=40 10:11:15 Set A/D channel type result=40 10:11:15 Set A/D encoding result=40 10:11:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:15 Set channel filter=0.000000e+000 result=40 10:11:15 Config A/D Result=40 10:11:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:15 Get A/D filter: -9.255963e+061 result=40 10:11:15 Get A/D value=-858993460 result=40 10:11:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:15 Aux= 10:11:15 Message to Camera, serial 218031 queued 10:11:52 Received message from Master: op=PointingHead serial=218044 10:11:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:11:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:11:52 Point started: ret=0 10:11:52 point_skyscan result=0 10:11:53 Check angles 10:11:53 SkyScan query 10:11:54 SkyScan query done: ret=0 az=153.09<-10206 ze=-21.915<-13461 Statuses=0009 0009 10:11:54 Msec=0 True Az=153.09 Ze=-21.915 Az status=0009 Ze status=0009 10:11:54 Check angles 10:11:54 SkyScan query 10:11:54 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.93<-12062 Statuses=0009 0009 10:11:54 Msec=750 True Az=135.735 Ze=-0.93 Az status=0009 Ze status=0009 10:11:55 Check angles 10:11:55 SkyScan query 10:11:55 SkyScan query done: ret=0 az=117.75<-7850 ze=20.445<-10637 Statuses=0009 0009 10:11:55 Msec=1500 True Az=117.75 Ze=20.445 Az status=0009 Ze status=0009 10:11:55 Check angles 10:11:55 SkyScan query 10:11:56 SkyScan query done: ret=0 az=100.425<-6695 ze=41.445<-9237 Statuses=0009 0009 10:11:56 Msec=2250 True Az=100.425 Ze=41.445 Az status=0009 Ze status=0009 10:11:56 Check angles 10:11:56 SkyScan query 10:11:57 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 10:11:57 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 10:11:57 Check angles 10:11:57 SkyScan query 10:11:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:11:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:11:57 Message to Master queued w/err=0: serial=218044 error=0 10:12:02 Received message from Master: op=Filter serial=218045 10:12:02 Color wheel filter change from 0 to 0 10:12:02 FLIGetFilterPos err=0 currentPosition=0 10:12:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:02 Filter is already there-color wheel unchanged 10:12:03 Received message from Master: op=Shutter serial=218046 10:12:03 Shutter LASER close 10:12:03 Received message from Camera: op=State serial=218048 10:12:03 GetSingleValue result=40 Value=cccccccc 10:12:03 SkyScan query 10:12:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:12:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:03 Parameters OK 10:12:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:03 Set A/D data flow result=40 10:12:03 Set A/D channel type result=40 10:12:03 Set A/D encoding result=40 10:12:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:03 Set channel filter=0.000000e+000 result=40 10:12:03 Config A/D Result=40 10:12:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:03 Get A/D filter: -9.255963e+061 result=40 10:12:03 Get A/D value=-858993460 result=40 10:12:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:03 Parameters OK 10:12:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:03 Set A/D data flow result=40 10:12:03 Set A/D channel type result=40 10:12:03 Set A/D encoding result=40 10:12:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:03 Set channel filter=0.000000e+000 result=40 10:12:03 Config A/D Result=40 10:12:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:03 Get A/D filter: -9.255963e+061 result=40 10:12:03 Get A/D value=-858993460 result=40 10:12:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:03 Aux= 10:12:03 Message to Camera, serial 218048 queued 10:12:40 Received message from Master: op=PointingHead serial=218061 10:12:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:12:40 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:12:41 Point started: ret=0 10:12:41 point_skyscan result=0 10:12:41 Check angles 10:12:41 SkyScan query 10:12:42 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 10:12:42 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 10:12:42 Check angles 10:12:42 SkyScan query 10:12:43 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 10:12:43 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 10:12:43 Check angles 10:12:43 SkyScan query 10:12:43 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 10:12:43 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 10:12:44 Check angles 10:12:44 SkyScan query 10:12:44 SkyScan query done: ret=0 az=161.4<-10760 ze=38.505<-9433 Statuses=0009 0008 10:12:44 Msec=2250 True Az=161.4 Ze=38.505 Az status=0009 Ze status=0008 10:12:44 Check angles 10:12:44 SkyScan query 10:12:45 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:12:45 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:12:45 Check angles 10:12:45 SkyScan query 10:12:46 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:12:46 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:12:46 Message to Master queued w/err=0: serial=218061 error=0 10:12:51 Received message from Master: op=Filter serial=218062 10:12:51 Color wheel filter change from 0 to 0 10:12:51 FLIGetFilterPos err=0 currentPosition=0 10:12:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:51 Filter is already there-color wheel unchanged 10:12:51 Received message from Master: op=Shutter serial=218063 10:12:51 Shutter LASER close 10:12:51 Received message from Camera: op=State serial=218065 10:12:51 GetSingleValue result=40 Value=cccccccc 10:12:51 SkyScan query 10:12:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:12:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:51 Parameters OK 10:12:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:51 Set A/D data flow result=40 10:12:51 Set A/D channel type result=40 10:12:51 Set A/D encoding result=40 10:12:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:51 Set channel filter=0.000000e+000 result=40 10:12:51 Config A/D Result=40 10:12:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:51 Get A/D filter: -9.255963e+061 result=40 10:12:51 Get A/D value=-858993460 result=40 10:12:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:51 Parameters OK 10:12:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:51 Set A/D data flow result=40 10:12:51 Set A/D channel type result=40 10:12:51 Set A/D encoding result=40 10:12:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:51 Set channel filter=0.000000e+000 result=40 10:12:51 Config A/D Result=40 10:12:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:51 Get A/D filter: -9.255963e+061 result=40 10:12:51 Get A/D value=-858993460 result=40 10:12:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:51 Aux= 10:12:51 Message to Camera, serial 218065 queued 10:13:28 Received message from Master: op=PointingHead serial=218078 10:13:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:13:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:13:29 Point started: ret=0 10:13:29 point_skyscan result=0 10:13:29 Check angles 10:13:29 SkyScan query 10:13:30 SkyScan query done: ret=0 az=152.955<-10197 ze=8.625<-11425 Statuses=0009 0009 10:13:30 Msec=0 True Az=152.955 Ze=8.625 Az status=0009 Ze status=0009 10:13:30 Check angles 10:13:30 SkyScan query 10:13:31 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.75<-12850 Statuses=0009 0009 10:13:31 Msec=750 True Az=135.105 Ze=-12.75 Az status=0009 Ze status=0009 10:13:31 Check angles 10:13:31 SkyScan query 10:13:31 SkyScan query done: ret=0 az=117.27<-7818 ze=-34.23<-14282 Statuses=0009 0009 10:13:31 Msec=1500 True Az=117.27 Ze=-34.23 Az status=0009 Ze status=0009 10:13:32 Check angles 10:13:32 SkyScan query 10:13:32 SkyScan query done: ret=0 az=99.885<-6659 ze=-51.57<-15438 Statuses=0009 0009 10:13:32 Msec=2250 True Az=99.885 Ze=-51.57 Az status=0009 Ze status=0009 10:13:32 Check angles 10:13:32 SkyScan query 10:13:33 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 10:13:33 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 10:13:33 Check angles 10:13:33 SkyScan query 10:13:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:13:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:13:34 Message to Master queued w/err=0: serial=218078 error=0 10:13:39 Received message from Master: op=Filter serial=218079 10:13:39 Color wheel filter change from 0 to 0 10:13:39 FLIGetFilterPos err=0 currentPosition=0 10:13:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:39 Filter is already there-color wheel unchanged 10:13:39 Received message from Master: op=Shutter serial=218080 10:13:39 Shutter LASER close 10:13:39 Received message from Camera: op=State serial=218082 10:13:39 GetSingleValue result=40 Value=cccccccc 10:13:39 SkyScan query 10:13:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:13:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:39 Parameters OK 10:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:39 Set A/D data flow result=40 10:13:39 Set A/D channel type result=40 10:13:39 Set A/D encoding result=40 10:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:39 Set channel filter=0.000000e+000 result=40 10:13:39 Config A/D Result=40 10:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:39 Get A/D filter: -9.255963e+061 result=40 10:13:39 Get A/D value=-858993460 result=40 10:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:39 Parameters OK 10:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:39 Set A/D data flow result=40 10:13:39 Set A/D channel type result=40 10:13:39 Set A/D encoding result=40 10:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:39 Set channel filter=0.000000e+000 result=40 10:13:39 Config A/D Result=40 10:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:39 Get A/D filter: -9.255963e+061 result=40 10:13:39 Get A/D value=-858993460 result=40 10:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:39 Aux= 10:13:39 Message to Camera, serial 218082 queued 10:14:16 Received message from Master: op=PointingHead serial=218095 10:14:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:14:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:14:17 Point started: ret=0 10:14:17 point_skyscan result=0 10:14:17 Check angles 10:14:17 SkyScan query 10:14:18 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.3<-17420 Statuses=0009 0009 10:14:18 Msec=0 True Az=108.99 Ze=-81.3 Az status=0009 Ze status=0009 10:14:18 Check angles 10:14:18 SkyScan query 10:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 10:14:19 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 10:14:19 Check angles 10:14:19 SkyScan query 10:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 10:14:20 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 10:14:20 Check angles 10:14:20 SkyScan query 10:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 10:14:20 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 10:14:20 Check angles 10:14:20 SkyScan query 10:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 10:14:21 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 10:14:21 Check angles 10:14:21 SkyScan query 10:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:14:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:14:22 Message to Master queued w/err=0: serial=218095 error=0 10:14:27 Received message from Master: op=Filter serial=218096 10:14:27 Color wheel filter change from 0 to 0 10:14:27 FLIGetFilterPos err=0 currentPosition=0 10:14:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:27 Filter is already there-color wheel unchanged 10:14:27 Received message from Master: op=Shutter serial=218097 10:14:27 Shutter LASER open 10:14:27 Received message from Camera: op=State serial=218099 10:14:27 GetSingleValue result=40 Value=cccccccc 10:14:27 SkyScan query 10:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:14:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:28 Parameters OK 10:14:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:28 Set A/D data flow result=40 10:14:28 Set A/D channel type result=40 10:14:28 Set A/D encoding result=40 10:14:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:28 Set channel filter=0.000000e+000 result=40 10:14:28 Config A/D Result=40 10:14:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:28 Get A/D filter: -9.255963e+061 result=40 10:14:28 Get A/D value=-858993460 result=40 10:14:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:28 Parameters OK 10:14:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:28 Set A/D data flow result=40 10:14:28 Set A/D channel type result=40 10:14:28 Set A/D encoding result=40 10:14:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:28 Set channel filter=0.000000e+000 result=40 10:14:28 Config A/D Result=40 10:14:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:28 Get A/D filter: -9.255963e+061 result=40 10:14:28 Get A/D value=-858993460 result=40 10:14:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:28 Aux= 10:14:28 Message to Camera, serial 218099 queued 10:14:36 Received message from Master: op=Shutter serial=218109 10:14:36 Shutter LASER close 10:14:37 Received message from Master: op=PointingHead serial=218113 10:14:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:14:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:14:37 Point started: ret=0 10:14:37 point_skyscan result=0 10:14:38 Check angles 10:14:38 SkyScan query 10:14:38 SkyScan query done: ret=0 az=90.18<-6012 ze=157.53<-1498 Statuses=0009 0009 10:14:38 Msec=0 True Az=90.18 Ze=157.53 Az status=0009 Ze status=0009 10:14:38 Check angles 10:14:38 SkyScan query 10:14:39 SkyScan query done: ret=0 az=72.78<-4852 ze=136.545<-2897 Statuses=0009 0009 10:14:39 Msec=750 True Az=72.78 Ze=136.545 Az status=0009 Ze status=0009 10:14:39 Check angles 10:14:39 SkyScan query 10:14:40 SkyScan query done: ret=0 az=54.96<-3664 ze=115.2<-4320 Statuses=0009 0009 10:14:40 Msec=1500 True Az=54.96 Ze=115.2 Az status=0009 Ze status=0009 10:14:40 Check angles 10:14:40 SkyScan query 10:14:40 SkyScan query done: ret=0 az=41.01<-2734 ze=94.215<-5719 Statuses=0009 0009 10:14:40 Msec=2250 True Az=41.01 Ze=94.215 Az status=0009 Ze status=0009 10:14:41 Check angles 10:14:41 SkyScan query 10:14:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.275<-7115 Statuses=0008 0009 10:14:41 Msec=3000 True Az=40.995 Ze=73.275 Az status=0008 Ze status=0009 10:14:41 Check angles 10:14:41 SkyScan query 10:14:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 10:14:42 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 10:14:42 Check angles 10:14:42 SkyScan query 10:14:43 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 10:14:43 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 10:14:43 Message to Master queued w/err=0: serial=218113 error=0 10:14:48 Received message from Master: op=Filter serial=218114 10:14:48 Color wheel filter change from 0 to 0 10:14:48 FLIGetFilterPos err=0 currentPosition=0 10:14:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:48 Filter is already there-color wheel unchanged 10:14:48 Received message from Master: op=Shutter serial=218115 10:14:48 Shutter LASER close 10:14:48 Received message from Camera: op=State serial=218117 10:14:48 GetSingleValue result=40 Value=cccccccc 10:14:48 SkyScan query 10:14:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:14:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:49 Parameters OK 10:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:49 Set A/D data flow result=40 10:14:49 Set A/D channel type result=40 10:14:49 Set A/D encoding result=40 10:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:49 Set channel filter=0.000000e+000 result=40 10:14:49 Config A/D Result=40 10:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:49 Get A/D filter: -9.255963e+061 result=40 10:14:49 Get A/D value=-858993460 result=40 10:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:49 Parameters OK 10:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:49 Set A/D data flow result=40 10:14:49 Set A/D channel type result=40 10:14:49 Set A/D encoding result=40 10:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:49 Set channel filter=0.000000e+000 result=40 10:14:49 Config A/D Result=40 10:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:49 Get A/D filter: -9.255963e+061 result=40 10:14:49 Get A/D value=-858993460 result=40 10:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:49 Aux= 10:14:49 Message to Camera, serial 218117 queued 10:15:26 Received message from Master: op=PointingHead serial=218130 10:15:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:15:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:15:26 Point started: ret=0 10:15:26 point_skyscan result=0 10:15:27 Check angles 10:15:27 SkyScan query 10:15:27 SkyScan query done: ret=0 az=63.81<-4254 ze=66.54<-7564 Statuses=0009 0008 10:15:27 Msec=0 True Az=63.81 Ze=66.54 Az status=0009 Ze status=0008 10:15:27 Received message from Master: op=Identify serial=218131 10:15:27 Check angles 10:15:27 SkyScan query 10:15:28 SkyScan query done: ret=0 az=81.105<-5407 ze=66.51<-7566 Statuses=0009 0008 10:15:28 Msec=750 True Az=81.105 Ze=66.51 Az status=0009 Ze status=0008 10:15:28 Check angles 10:15:28 SkyScan query 10:15:29 SkyScan query done: ret=0 az=98.685<-6579 ze=66.495<-7567 Statuses=0009 0008 10:15:29 Msec=1500 True Az=98.685 Ze=66.495 Az status=0009 Ze status=0008 10:15:29 Check angles 10:15:29 SkyScan query 10:15:29 SkyScan query done: ret=0 az=116.22<-7748 ze=66.495<-7567 Statuses=0009 0008 10:15:29 Msec=2250 True Az=116.22 Ze=66.495 Az status=0009 Ze status=0008 10:15:30 Check angles 10:15:30 SkyScan query 10:15:30 SkyScan query done: ret=0 az=133.53<-8902 ze=66.495<-7567 Statuses=0009 0008 10:15:30 Msec=3000 True Az=133.53 Ze=66.495 Az status=0009 Ze status=0008 10:15:30 Check angles 10:15:30 SkyScan query 10:15:31 SkyScan query done: ret=0 az=151.035<-10069 ze=66.495<-7567 Statuses=0009 0008 10:15:31 Msec=3750 True Az=151.035 Ze=66.495 Az status=0009 Ze status=0008 10:15:31 Check angles 10:15:31 SkyScan query 10:15:32 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:15:32 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:15:32 Message to Master queued w/err=0: serial=218130 error=0 [UTC 2018-12-17 10:15:37] 10:15:37 Received message from Master: op=Filter serial=218134 10:15:37 Color wheel filter change from 0 to 0 10:15:37 FLIGetFilterPos err=0 currentPosition=0 10:15:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:37 Filter is already there-color wheel unchanged 10:15:37 Received message from Master: op=Shutter serial=218135 10:15:37 Shutter LASER close 10:15:37 Received message from Camera: op=State serial=218137 10:15:37 GetSingleValue result=40 Value=cccccccc 10:15:37 SkyScan query 10:15:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:15:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:38 Parameters OK 10:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:38 Set A/D data flow result=40 10:15:38 Set A/D channel type result=40 10:15:38 Set A/D encoding result=40 10:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:38 Set channel filter=0.000000e+000 result=40 10:15:38 Config A/D Result=40 10:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:38 Get A/D filter: -9.255963e+061 result=40 10:15:38 Get A/D value=-858993460 result=40 10:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:38 Parameters OK 10:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:38 Set A/D data flow result=40 10:15:38 Set A/D channel type result=40 10:15:38 Set A/D encoding result=40 10:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:38 Set channel filter=0.000000e+000 result=40 10:15:38 Config A/D Result=40 10:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:38 Get A/D filter: -9.255963e+061 result=40 10:15:38 Get A/D value=-858993460 result=40 10:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:38 Aux= 10:15:38 Message to Camera, serial 218137 queued [UTC 2018-12-17 10:15:52] 10:16:14 Received message from Master: op=PointingHead serial=218150 10:16:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:16:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:16:15 Point started: ret=0 10:16:15 point_skyscan result=0 10:16:15 Check angles 10:16:15 SkyScan query 10:16:16 SkyScan query done: ret=0 az=134.76<-8984 ze=36.6<-9560 Statuses=0009 0009 10:16:16 Msec=0 True Az=134.76 Ze=36.6 Az status=0009 Ze status=0009 10:16:16 Check angles 10:16:16 SkyScan query 10:16:17 SkyScan query done: ret=0 az=117.06<-7804 ze=15.255<-10983 Statuses=0009 0009 10:16:17 Msec=750 True Az=117.06 Ze=15.255 Az status=0009 Ze status=0009 10:16:17 Check angles 10:16:17 SkyScan query 10:16:18 SkyScan query done: ret=0 az=99.255<-6617 ze=-6.195<-12413 Statuses=0009 0009 10:16:18 Msec=1500 True Az=99.255 Ze=-6.195 Az status=0009 Ze status=0009 10:16:18 Check angles 10:16:18 SkyScan query 10:16:18 SkyScan query done: ret=0 az=81.84<-5456 ze=-27.165<-13811 Statuses=0009 0009 10:16:18 Msec=2250 True Az=81.84 Ze=-27.165 Az status=0009 Ze status=0009 10:16:19 Check angles 10:16:19 SkyScan query 10:16:19 SkyScan query done: ret=0 az=64.155<-4277 ze=-38.58<-14572 Statuses=0009 0008 10:16:19 Msec=3000 True Az=64.155 Ze=-38.58 Az status=0009 Ze status=0008 10:16:19 Check angles 10:16:19 SkyScan query 10:16:20 SkyScan query done: ret=0 az=46.92<-3128 ze=-38.52<-14568 Statuses=0009 0008 10:16:20 Msec=3750 True Az=46.92 Ze=-38.52 Az status=0009 Ze status=0008 10:16:20 Check angles 10:16:20 SkyScan query 10:16:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:16:21 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:16:21 Message to Master queued w/err=0: serial=218150 error=0 10:16:26 Received message from Master: op=Filter serial=218151 10:16:26 Color wheel filter change from 0 to 0 10:16:26 FLIGetFilterPos err=0 currentPosition=0 10:16:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:26 Filter is already there-color wheel unchanged 10:16:26 Received message from Master: op=Shutter serial=218152 10:16:26 Shutter LASER close 10:16:26 Received message from Camera: op=State serial=218154 10:16:26 GetSingleValue result=40 Value=cccccccc 10:16:26 SkyScan query 10:16:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:16:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:26 Parameters OK 10:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:26 Set A/D data flow result=40 10:16:26 Set A/D channel type result=40 10:16:26 Set A/D encoding result=40 10:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:26 Set channel filter=0.000000e+000 result=40 10:16:26 Config A/D Result=40 10:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:26 Get A/D filter: -9.255963e+061 result=40 10:16:26 Get A/D value=-858993460 result=40 10:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:26 Parameters OK 10:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:26 Set A/D data flow result=40 10:16:26 Set A/D channel type result=40 10:16:26 Set A/D encoding result=40 10:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:26 Set channel filter=0.000000e+000 result=40 10:16:26 Config A/D Result=40 10:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:26 Get A/D filter: -9.255963e+061 result=40 10:16:26 Get A/D value=-858993460 result=40 10:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:26 Aux= 10:16:26 Message to Camera, serial 218154 queued 10:17:03 Received message from Master: op=PointingHead serial=218167 10:17:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:17:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:17:04 Point started: ret=0 10:17:04 point_skyscan result=0 10:17:04 Check angles 10:17:04 SkyScan query 10:17:05 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.04<-16536 Statuses=0009 0009 10:17:05 Msec=0 True Az=63.825 Ze=-68.04 Az status=0009 Ze status=0009 10:17:05 Check angles 10:17:05 SkyScan query 10:17:06 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.475<-17965 Statuses=0009 0009 10:17:06 Msec=750 True Az=81.555 Ze=-89.475 Az status=0009 Ze status=0009 10:17:06 Check angles 10:17:06 SkyScan query 10:17:07 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.445<-19363 Statuses=0009 0009 10:17:07 Msec=1500 True Az=99.12 Ze=-110.445 Az status=0009 Ze status=0009 10:17:07 Check angles 10:17:07 SkyScan query 10:17:07 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.37<-20758 Statuses=0009 0009 10:17:07 Msec=2250 True Az=116.595 Ze=-131.37 Az status=0009 Ze status=0009 10:17:07 Check angles 10:17:07 SkyScan query 10:17:08 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 10:17:08 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 10:17:08 Check angles 10:17:08 SkyScan query 10:17:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:17:09 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:17:09 Message to Master queued w/err=0: serial=218167 error=0 10:17:14 Received message from Master: op=Filter serial=218168 10:17:14 Color wheel filter change from 0 to 0 10:17:14 FLIGetFilterPos err=0 currentPosition=0 10:17:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:14 Filter is already there-color wheel unchanged 10:17:14 Received message from Master: op=Shutter serial=218169 10:17:14 Shutter LASER close 10:17:14 Received message from Camera: op=State serial=218171 10:17:14 GetSingleValue result=40 Value=cccccccc 10:17:14 SkyScan query 10:17:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:17:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:15 Parameters OK 10:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:15 Set A/D data flow result=40 10:17:15 Set A/D channel type result=40 10:17:15 Set A/D encoding result=40 10:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:15 Set channel filter=0.000000e+000 result=40 10:17:15 Config A/D Result=40 10:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:15 Get A/D filter: -9.255963e+061 result=40 10:17:15 Get A/D value=-858993460 result=40 10:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:15 Parameters OK 10:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:15 Set A/D data flow result=40 10:17:15 Set A/D channel type result=40 10:17:15 Set A/D encoding result=40 10:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:15 Set channel filter=0.000000e+000 result=40 10:17:15 Config A/D Result=40 10:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:15 Get A/D filter: -9.255963e+061 result=40 10:17:15 Get A/D value=-858993460 result=40 10:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:15 Aux= 10:17:15 Message to Camera, serial 218171 queued 10:17:51 Received message from Master: op=PointingHead serial=218184 10:17:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:17:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:17:52 Point started: ret=0 10:17:52 point_skyscan result=0 10:17:52 Check angles 10:17:52 SkyScan query 10:17:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 10:17:53 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 10:17:53 Check angles 10:17:53 SkyScan query 10:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:17:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:17:54 Message to Master queued w/err=0: serial=218184 error=0 10:17:59 Received message from Master: op=Filter serial=218185 10:17:59 Color wheel filter change from 0 to 0 10:17:59 FLIGetFilterPos err=0 currentPosition=0 10:17:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:59 Filter is already there-color wheel unchanged 10:17:59 Received message from Master: op=Shutter serial=218186 10:17:59 Shutter LASER open 10:17:59 Received message from Camera: op=State serial=218188 10:17:59 GetSingleValue result=40 Value=cccccccc 10:17:59 SkyScan query 10:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:18:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:00 Parameters OK 10:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:00 Set A/D data flow result=40 10:18:00 Set A/D channel type result=40 10:18:00 Set A/D encoding result=40 10:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:00 Set channel filter=0.000000e+000 result=40 10:18:00 Config A/D Result=40 10:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:00 Get A/D filter: -9.255963e+061 result=40 10:18:00 Get A/D value=-858993460 result=40 10:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:00 Parameters OK 10:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:00 Set A/D data flow result=40 10:18:00 Set A/D channel type result=40 10:18:00 Set A/D encoding result=40 10:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:00 Set channel filter=0.000000e+000 result=40 10:18:00 Config A/D Result=40 10:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:00 Get A/D filter: -9.255963e+061 result=40 10:18:00 Get A/D value=-858993460 result=40 10:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:00 Aux= 10:18:00 Message to Camera, serial 218188 queued 10:18:08 Received message from Master: op=Shutter serial=218198 10:18:08 Shutter LASER close 10:18:09 Received message from Master: op=PointingHead serial=218202 10:18:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:18:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:18:09 Point started: ret=0 10:18:09 point_skyscan result=0 10:18:10 Check angles 10:18:10 SkyScan query 10:18:11 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.71<-21514 Statuses=0009 0009 10:18:11 Msec=0 True Az=136.395 Ze=-142.71 Az status=0009 Ze status=0009 10:18:11 Check angles 10:18:11 SkyScan query 10:18:11 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.755<-20117 Statuses=0009 0009 10:18:11 Msec=750 True Az=153.96 Ze=-121.755 Az status=0009 Ze status=0009 10:18:12 Check angles 10:18:12 SkyScan query 10:18:12 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.725<-18715 Statuses=0009 0009 10:18:12 Msec=1500 True Az=171.375 Ze=-100.725 Az status=0009 Ze status=0009 10:18:12 Check angles 10:18:12 SkyScan query 10:18:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.86<-17324 Statuses=0008 0009 10:18:13 Msec=2250 True Az=176.01 Ze=-79.86 Az status=0008 Ze status=0009 10:18:13 Check angles 10:18:13 SkyScan query 10:18:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.845<-15923 Statuses=0008 0009 10:18:14 Msec=3000 True Az=176.01 Ze=-58.845 Az status=0008 Ze status=0009 10:18:14 Check angles 10:18:14 SkyScan query 10:18:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:18:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:18:14 Message to Master queued w/err=0: serial=218202 error=0 10:18:19 Received message from Master: op=Filter serial=218203 10:18:19 Color wheel filter change from 0 to 0 10:18:19 FLIGetFilterPos err=0 currentPosition=0 10:18:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:19 Filter is already there-color wheel unchanged 10:18:20 Received message from Master: op=Shutter serial=218204 10:18:20 Shutter LASER close 10:18:20 Received message from Camera: op=State serial=218206 10:18:20 GetSingleValue result=40 Value=cccccccc 10:18:20 SkyScan query 10:18:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:18:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:20 Parameters OK 10:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:20 Set A/D data flow result=40 10:18:20 Set A/D channel type result=40 10:18:20 Set A/D encoding result=40 10:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:20 Set channel filter=0.000000e+000 result=40 10:18:20 Config A/D Result=40 10:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:20 Get A/D filter: -9.255963e+061 result=40 10:18:20 Get A/D value=-858993460 result=40 10:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:20 Parameters OK 10:18:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:20 Set A/D data flow result=40 10:18:20 Set A/D channel type result=40 10:18:20 Set A/D encoding result=40 10:18:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:20 Set channel filter=0.000000e+000 result=40 10:18:20 Config A/D Result=40 10:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:20 Get A/D filter: -9.255963e+061 result=40 10:18:20 Get A/D value=-858993460 result=40 10:18:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:20 Aux= 10:18:20 Message to Camera, serial 218206 queued 10:18:57 Received message from Master: op=PointingHead serial=218219 10:18:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:18:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:18:58 Point started: ret=0 10:18:58 point_skyscan result=0 10:18:58 Check angles 10:18:58 SkyScan query 10:18:59 SkyScan query done: ret=0 az=153.15<-10210 ze=-21.915<-13461 Statuses=0009 0009 10:18:59 Msec=0 True Az=153.15 Ze=-21.915 Az status=0009 Ze status=0009 10:18:59 Check angles 10:18:59 SkyScan query 10:19:00 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.915<-12061 Statuses=0009 0009 10:19:00 Msec=750 True Az=135.72 Ze=-0.915 Az status=0009 Ze status=0009 10:19:00 Check angles 10:19:00 SkyScan query 10:19:00 SkyScan query done: ret=0 az=118.14<-7876 ze=20.025<-10665 Statuses=0009 0009 10:19:00 Msec=1500 True Az=118.14 Ze=20.025 Az status=0009 Ze status=0009 10:19:01 Check angles 10:19:01 SkyScan query 10:19:01 SkyScan query done: ret=0 az=100.77<-6718 ze=41.01<-9266 Statuses=0009 0009 10:19:01 Msec=2250 True Az=100.77 Ze=41.01 Az status=0009 Ze status=0009 10:19:01 Check angles 10:19:01 SkyScan query 10:19:02 SkyScan query done: ret=0 az=85.965<-5731 ze=51.54<-8564 Statuses=0009 0008 10:19:02 Msec=3000 True Az=85.965 Ze=51.54 Az status=0009 Ze status=0008 10:19:02 Check angles 10:19:02 SkyScan query 10:19:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:19:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:19:03 Message to Master queued w/err=0: serial=218219 error=0 10:19:08 Received message from Master: op=Filter serial=218220 10:19:08 Color wheel filter change from 0 to 0 10:19:08 FLIGetFilterPos err=0 currentPosition=0 10:19:08 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:08 Filter is already there-color wheel unchanged 10:19:08 Received message from Master: op=Shutter serial=218221 10:19:08 Shutter LASER close 10:19:08 Received message from Camera: op=State serial=218223 10:19:08 GetSingleValue result=40 Value=cccccccc 10:19:08 SkyScan query 10:19:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:19:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:08 Parameters OK 10:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:08 Set A/D data flow result=40 10:19:08 Set A/D channel type result=40 10:19:08 Set A/D encoding result=40 10:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:08 Set channel filter=0.000000e+000 result=40 10:19:08 Config A/D Result=40 10:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:08 Get A/D filter: -9.255963e+061 result=40 10:19:08 Get A/D value=-858993460 result=40 10:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:08 Parameters OK 10:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:08 Set A/D data flow result=40 10:19:08 Set A/D channel type result=40 10:19:08 Set A/D encoding result=40 10:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:08 Set channel filter=0.000000e+000 result=40 10:19:08 Config A/D Result=40 10:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:08 Get A/D filter: -9.255963e+061 result=40 10:19:08 Get A/D value=-858993460 result=40 10:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:08 Aux= 10:19:08 Message to Camera, serial 218223 queued 10:19:45 Received message from Master: op=PointingHead serial=218236 10:19:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:19:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:19:46 Point started: ret=0 10:19:46 point_skyscan result=0 10:19:46 Check angles 10:19:46 SkyScan query 10:19:47 SkyScan query done: ret=0 az=108.66<-7244 ze=38.49<-9434 Statuses=0009 0008 10:19:47 Msec=0 True Az=108.66 Ze=38.49 Az status=0009 Ze status=0008 10:19:47 Check angles 10:19:47 SkyScan query 10:19:48 SkyScan query done: ret=0 az=126.225<-8415 ze=38.505<-9433 Statuses=0009 0008 10:19:48 Msec=750 True Az=126.225 Ze=38.505 Az status=0009 Ze status=0008 10:19:48 Check angles 10:19:48 SkyScan query 10:19:48 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 10:19:48 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 10:19:49 Check angles 10:19:49 SkyScan query 10:19:49 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 10:19:49 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 10:19:49 Check angles 10:19:49 SkyScan query 10:19:50 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:19:50 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:19:50 Check angles 10:19:50 SkyScan query 10:19:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:19:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:19:51 Message to Master queued w/err=0: serial=218236 error=0 10:19:56 Received message from Master: op=Filter serial=218237 10:19:56 Color wheel filter change from 0 to 0 10:19:56 FLIGetFilterPos err=0 currentPosition=0 10:19:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:56 Filter is already there-color wheel unchanged 10:19:56 Received message from Master: op=Shutter serial=218238 10:19:56 Shutter LASER close 10:19:56 Received message from Camera: op=State serial=218240 10:19:56 GetSingleValue result=40 Value=cccccccc 10:19:56 SkyScan query 10:19:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:19:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:56 Parameters OK 10:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:56 Set A/D data flow result=40 10:19:56 Set A/D channel type result=40 10:19:56 Set A/D encoding result=40 10:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:56 Set channel filter=0.000000e+000 result=40 10:19:56 Config A/D Result=40 10:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:56 Get A/D filter: -9.255963e+061 result=40 10:19:56 Get A/D value=-858993460 result=40 10:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:56 Parameters OK 10:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:56 Set A/D data flow result=40 10:19:56 Set A/D channel type result=40 10:19:56 Set A/D encoding result=40 10:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:56 Set channel filter=0.000000e+000 result=40 10:19:56 Config A/D Result=40 10:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:56 Get A/D filter: -9.255963e+061 result=40 10:19:56 Get A/D value=-858993460 result=40 10:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:56 Aux= 10:19:56 Message to Camera, serial 218240 queued 10:20:33 Received message from Master: op=PointingHead serial=218253 10:20:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:20:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:20:34 Point started: ret=0 10:20:34 point_skyscan result=0 10:20:34 Check angles 10:20:34 SkyScan query 10:20:35 SkyScan query done: ret=0 az=153.165<-10211 ze=8.91<-11406 Statuses=0009 0009 10:20:35 Msec=0 True Az=153.165 Ze=8.91 Az status=0009 Ze status=0009 10:20:35 Check angles 10:20:35 SkyScan query 10:20:36 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.075<-12805 Statuses=0009 0009 10:20:36 Msec=750 True Az=135.72 Ze=-12.075 Az status=0009 Ze status=0009 10:20:36 Check angles 10:20:36 SkyScan query 10:20:36 SkyScan query done: ret=0 az=118.17<-7878 ze=-32.985<-14199 Statuses=0009 0009 10:20:36 Msec=1500 True Az=118.17 Ze=-32.985 Az status=0009 Ze status=0009 10:20:37 Check angles 10:20:37 SkyScan query 10:20:37 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.555<-15437 Statuses=0009 0009 10:20:37 Msec=2250 True Az=100.455 Ze=-51.555 Az status=0009 Ze status=0009 10:20:37 Check angles 10:20:37 SkyScan query 10:20:38 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:20:38 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:20:38 Check angles 10:20:38 SkyScan query 10:20:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:20:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:20:39 Message to Master queued w/err=0: serial=218253 error=0 10:20:44 Received message from Master: op=Filter serial=218254 10:20:44 Color wheel filter change from 0 to 0 10:20:44 FLIGetFilterPos err=0 currentPosition=0 10:20:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:44 Filter is already there-color wheel unchanged 10:20:44 Received message from Master: op=Shutter serial=218255 10:20:44 Shutter LASER close 10:20:44 Received message from Camera: op=State serial=218257 10:20:44 GetSingleValue result=40 Value=cccccccc 10:20:44 SkyScan query 10:20:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:20:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:45 Parameters OK 10:20:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:45 Set A/D data flow result=40 10:20:45 Set A/D channel type result=40 10:20:45 Set A/D encoding result=40 10:20:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:45 Set channel filter=0.000000e+000 result=40 10:20:45 Config A/D Result=40 10:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:45 Get A/D filter: -9.255963e+061 result=40 10:20:45 Get A/D value=-858993460 result=40 10:20:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:45 Parameters OK 10:20:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:45 Set A/D data flow result=40 10:20:45 Set A/D channel type result=40 10:20:45 Set A/D encoding result=40 10:20:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:45 Set channel filter=0.000000e+000 result=40 10:20:45 Config A/D Result=40 10:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:45 Get A/D filter: -9.255963e+061 result=40 10:20:45 Get A/D value=-858993460 result=40 10:20:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:45 Aux= 10:20:45 Message to Camera, serial 218257 queued 10:21:21 Received message from Master: op=PointingHead serial=218270 10:21:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:21:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:21:22 Point started: ret=0 10:21:22 point_skyscan result=0 10:21:22 Check angles 10:21:22 SkyScan query 10:21:23 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.18<-17412 Statuses=0009 0009 10:21:23 Msec=0 True Az=108.93 Ze=-81.18 Az status=0009 Ze status=0009 10:21:23 Check angles 10:21:23 SkyScan query 10:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.15<-18810 Statuses=0008 0009 10:21:24 Msec=750 True Az=112.995 Ze=-102.15 Az status=0008 Ze status=0009 10:21:24 Check angles 10:21:24 SkyScan query 10:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.09<-20206 Statuses=0008 0009 10:21:25 Msec=1500 True Az=112.995 Ze=-123.09 Az status=0008 Ze status=0009 10:21:25 Check angles 10:21:25 SkyScan query 10:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.48<-21632 Statuses=0008 0009 10:21:25 Msec=2250 True Az=112.995 Ze=-144.48 Az status=0008 Ze status=0009 10:21:25 Check angles 10:21:25 SkyScan query 10:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.855<-23057 Statuses=0008 0009 10:21:26 Msec=3000 True Az=112.995 Ze=-165.855 Az status=0008 Ze status=0009 10:21:26 Check angles 10:21:26 SkyScan query 10:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:21:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:21:27 Message to Master queued w/err=0: serial=218270 error=0 10:21:32 Received message from Master: op=Filter serial=218271 10:21:32 Color wheel filter change from 0 to 0 10:21:32 FLIGetFilterPos err=0 currentPosition=0 10:21:32 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:32 Filter is already there-color wheel unchanged 10:21:32 Received message from Master: op=Shutter serial=218272 10:21:32 Shutter LASER open 10:21:32 Received message from Camera: op=State serial=218274 10:21:32 GetSingleValue result=40 Value=cccccccc 10:21:32 SkyScan query 10:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:21:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:33 Parameters OK 10:21:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:33 Set A/D data flow result=40 10:21:33 Set A/D channel type result=40 10:21:33 Set A/D encoding result=40 10:21:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:33 Set channel filter=0.000000e+000 result=40 10:21:33 Config A/D Result=40 10:21:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:33 Get A/D filter: -9.255963e+061 result=40 10:21:33 Get A/D value=-858993460 result=40 10:21:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:33 Parameters OK 10:21:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:33 Set A/D data flow result=40 10:21:33 Set A/D channel type result=40 10:21:33 Set A/D encoding result=40 10:21:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:33 Set channel filter=0.000000e+000 result=40 10:21:33 Config A/D Result=40 10:21:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:33 Get A/D filter: -9.255963e+061 result=40 10:21:33 Get A/D value=-858993460 result=40 10:21:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:33 Aux= 10:21:33 Message to Camera, serial 218274 queued 10:21:40 Received message from Master: op=Shutter serial=218283 10:21:40 Shutter LASER close 10:21:41 Received message from Master: op=PointingHead serial=218287 10:21:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:21:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:21:41 Point started: ret=0 10:21:41 point_skyscan result=0 10:21:42 Check angles 10:21:42 SkyScan query 10:21:42 SkyScan query done: ret=0 az=89.88<-5992 ze=157.41<-1506 Statuses=0009 0009 10:21:42 Msec=0 True Az=89.88 Ze=157.41 Az status=0009 Ze status=0009 10:21:43 Check angles 10:21:43 SkyScan query 10:21:43 SkyScan query done: ret=0 az=72.465<-4831 ze=136.425<-2905 Statuses=0009 0009 10:21:43 Msec=750 True Az=72.465 Ze=136.425 Az status=0009 Ze status=0009 10:21:43 Check angles 10:21:43 SkyScan query 10:21:44 SkyScan query done: ret=0 az=55.08<-3672 ze=115.515<-4299 Statuses=0009 0009 10:21:44 Msec=1500 True Az=55.08 Ze=115.515 Az status=0009 Ze status=0009 10:21:44 Check angles 10:21:44 SkyScan query 10:21:45 SkyScan query done: ret=0 az=40.995<-2733 ze=94.5<-5700 Statuses=0009 0009 10:21:45 Msec=2250 True Az=40.995 Ze=94.5 Az status=0009 Ze status=0009 10:21:45 Check angles 10:21:45 SkyScan query 10:21:45 SkyScan query done: ret=0 az=40.995<-2733 ze=73.575<-7095 Statuses=0008 0009 10:21:45 Msec=3000 True Az=40.995 Ze=73.575 Az status=0008 Ze status=0009 10:21:46 Check angles 10:21:46 SkyScan query 10:21:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.95<-8470 Statuses=0008 0009 10:21:46 Msec=3750 True Az=40.995 Ze=52.95 Az status=0008 Ze status=0009 10:21:46 Check angles 10:21:46 SkyScan query 10:21:47 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 10:21:47 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 10:21:47 Message to Master queued w/err=0: serial=218287 error=0 10:21:52 Received message from Master: op=Filter serial=218288 10:21:52 Color wheel filter change from 0 to 0 10:21:52 FLIGetFilterPos err=0 currentPosition=0 10:21:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:52 Filter is already there-color wheel unchanged 10:21:52 Received message from Master: op=Shutter serial=218289 10:21:52 Shutter LASER close 10:21:52 Received message from Camera: op=State serial=218291 10:21:52 GetSingleValue result=40 Value=cccccccc 10:21:52 SkyScan query 10:21:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:21:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:53 Parameters OK 10:21:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:53 Set A/D data flow result=40 10:21:53 Set A/D channel type result=40 10:21:53 Set A/D encoding result=40 10:21:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:53 Set channel filter=0.000000e+000 result=40 10:21:53 Config A/D Result=40 10:21:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:53 Get A/D filter: -9.255963e+061 result=40 10:21:53 Get A/D value=-858993460 result=40 10:21:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:53 Parameters OK 10:21:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:53 Set A/D data flow result=40 10:21:53 Set A/D channel type result=40 10:21:53 Set A/D encoding result=40 10:21:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:53 Set channel filter=0.000000e+000 result=40 10:21:53 Config A/D Result=40 10:21:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:53 Get A/D filter: -9.255963e+061 result=40 10:21:53 Get A/D value=-858993460 result=40 10:21:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:53 Aux= 10:21:53 Message to Camera, serial 218291 queued 10:22:30 Received message from Master: op=PointingHead serial=218304 10:22:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:22:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:22:30 Point started: ret=0 10:22:30 point_skyscan result=0 10:22:31 Check angles 10:22:31 SkyScan query 10:22:31 SkyScan query done: ret=0 az=64.455<-4297 ze=66.555<-7563 Statuses=0009 0008 10:22:31 Msec=0 True Az=64.455 Ze=66.555 Az status=0009 Ze status=0008 10:22:31 Check angles 10:22:31 SkyScan query 10:22:32 SkyScan query done: ret=0 az=81.855<-5457 ze=66.495<-7567 Statuses=0009 0008 10:22:32 Msec=750 True Az=81.855 Ze=66.495 Az status=0009 Ze status=0008 10:22:32 Check angles 10:22:32 SkyScan query 10:22:33 SkyScan query done: ret=0 az=99.495<-6633 ze=66.495<-7567 Statuses=0009 0008 10:22:33 Msec=1500 True Az=99.495 Ze=66.495 Az status=0009 Ze status=0008 10:22:33 Check angles 10:22:33 SkyScan query 10:22:34 SkyScan query done: ret=0 az=117.36<-7824 ze=66.495<-7567 Statuses=0009 0008 10:22:34 Msec=2250 True Az=117.36 Ze=66.495 Az status=0009 Ze status=0008 10:22:34 Check angles 10:22:34 SkyScan query 10:22:34 SkyScan query done: ret=0 az=134.82<-8988 ze=66.495<-7567 Statuses=0009 0008 10:22:34 Msec=3000 True Az=134.82 Ze=66.495 Az status=0009 Ze status=0008 10:22:34 Check angles 10:22:34 SkyScan query 10:22:35 SkyScan query done: ret=0 az=152.025<-10135 ze=66.495<-7567 Statuses=0009 0008 10:22:35 Msec=3750 True Az=152.025 Ze=66.495 Az status=0009 Ze status=0008 10:22:35 Check angles 10:22:35 SkyScan query 10:22:36 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:22:36 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:22:36 Message to Master queued w/err=0: serial=218304 error=0 10:22:41 Received message from Master: op=Filter serial=218305 10:22:41 Color wheel filter change from 0 to 0 10:22:41 FLIGetFilterPos err=0 currentPosition=0 10:22:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:41 Filter is already there-color wheel unchanged 10:22:41 Received message from Master: op=Shutter serial=218306 10:22:41 Shutter LASER close 10:22:41 Received message from Camera: op=State serial=218308 10:22:41 GetSingleValue result=40 Value=cccccccc 10:22:41 SkyScan query 10:22:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:22:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:42 Parameters OK 10:22:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:42 Set A/D data flow result=40 10:22:42 Set A/D channel type result=40 10:22:42 Set A/D encoding result=40 10:22:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:42 Set channel filter=0.000000e+000 result=40 10:22:42 Config A/D Result=40 10:22:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:42 Get A/D filter: -9.255963e+061 result=40 10:22:42 Get A/D value=-858993460 result=40 10:22:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:42 Parameters OK 10:22:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:42 Set A/D data flow result=40 10:22:42 Set A/D channel type result=40 10:22:42 Set A/D encoding result=40 10:22:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:42 Set channel filter=0.000000e+000 result=40 10:22:42 Config A/D Result=40 10:22:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:42 Get A/D filter: -9.255963e+061 result=40 10:22:42 Get A/D value=-858993460 result=40 10:22:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:42 Aux= 10:22:42 Message to Camera, serial 218308 queued 10:23:18 Received message from Master: op=PointingHead serial=218320 10:23:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:23:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:23:18 Point started: ret=0 10:23:18 point_skyscan result=0 10:23:19 Check angles 10:23:19 SkyScan query 10:23:19 SkyScan query done: ret=0 az=134.58<-8972 ze=36.33<-9578 Statuses=0009 0009 10:23:19 Msec=0 True Az=134.58 Ze=36.33 Az status=0009 Ze status=0009 10:23:19 Check angles 10:23:19 SkyScan query 10:23:20 SkyScan query done: ret=0 az=116.835<-7789 ze=14.91<-11006 Statuses=0009 0009 10:23:20 Msec=750 True Az=116.835 Ze=14.91 Az status=0009 Ze status=0009 10:23:20 Check angles 10:23:20 SkyScan query 10:23:21 SkyScan query done: ret=0 az=99.435<-6629 ze=-6.045<-12403 Statuses=0009 0009 10:23:21 Msec=1500 True Az=99.435 Ze=-6.045 Az status=0009 Ze status=0009 10:23:21 Check angles 10:23:21 SkyScan query 10:23:21 SkyScan query done: ret=0 az=81.96<-5464 ze=-27<-13800 Statuses=0009 0009 10:23:21 Msec=2250 True Az=81.96 Ze=-27 Az status=0009 Ze status=0009 10:23:22 Check angles 10:23:22 SkyScan query 10:23:22 SkyScan query done: ret=0 az=63.885<-4259 ze=-38.58<-14572 Statuses=0009 0008 10:23:22 Msec=3000 True Az=63.885 Ze=-38.58 Az status=0009 Ze status=0008 10:23:22 Check angles 10:23:22 SkyScan query 10:23:23 SkyScan query done: ret=0 az=46.83<-3122 ze=-38.52<-14568 Statuses=0009 0008 10:23:23 Msec=3750 True Az=46.83 Ze=-38.52 Az status=0009 Ze status=0008 10:23:23 Check angles 10:23:23 SkyScan query 10:23:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:23:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:23:24 Message to Master queued w/err=0: serial=218320 error=0 10:23:29 Received message from Master: op=Filter serial=218321 10:23:29 Color wheel filter change from 0 to 0 10:23:29 FLIGetFilterPos err=0 currentPosition=0 10:23:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:29 Filter is already there-color wheel unchanged 10:23:29 Received message from Master: op=Shutter serial=218322 10:23:29 Shutter LASER close 10:23:29 Received message from Camera: op=State serial=218324 10:23:29 GetSingleValue result=40 Value=cccccccc 10:23:29 SkyScan query 10:23:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:23:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:30 Parameters OK 10:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:30 Set A/D data flow result=40 10:23:30 Set A/D channel type result=40 10:23:30 Set A/D encoding result=40 10:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:30 Set channel filter=0.000000e+000 result=40 10:23:30 Config A/D Result=40 10:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:30 Get A/D filter: -9.255963e+061 result=40 10:23:30 Get A/D value=-858993460 result=40 10:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:30 Parameters OK 10:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:30 Set A/D data flow result=40 10:23:30 Set A/D channel type result=40 10:23:30 Set A/D encoding result=40 10:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:30 Set channel filter=0.000000e+000 result=40 10:23:30 Config A/D Result=40 10:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:30 Get A/D filter: -9.255963e+061 result=40 10:23:30 Get A/D value=-858993460 result=40 10:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:30 Aux= 10:23:30 Message to Camera, serial 218324 queued 10:24:06 Received message from Master: op=PointingHead serial=218337 10:24:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:24:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:24:07 Point started: ret=0 10:24:07 point_skyscan result=0 10:24:07 Check angles 10:24:07 SkyScan query 10:24:08 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.565<-16571 Statuses=0009 0009 10:24:08 Msec=0 True Az=64.215 Ze=-68.565 Az status=0009 Ze status=0009 10:24:08 Check angles 10:24:08 SkyScan query 10:24:09 SkyScan query done: ret=0 az=82.095<-5473 ze=-89.955<-17997 Statuses=0009 0009 10:24:09 Msec=750 True Az=82.095 Ze=-89.955 Az status=0009 Ze status=0009 10:24:09 Check angles 10:24:09 SkyScan query 10:24:10 SkyScan query done: ret=0 az=99.69<-6646 ze=-110.925<-19395 Statuses=0009 0009 10:24:10 Msec=1500 True Az=99.69 Ze=-110.925 Az status=0009 Ze status=0009 10:24:10 Check angles 10:24:10 SkyScan query 10:24:10 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.835<-20789 Statuses=0009 0009 10:24:10 Msec=2250 True Az=117.03 Ze=-131.835 Az status=0009 Ze status=0009 10:24:10 Check angles 10:24:10 SkyScan query 10:24:11 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.555<-21437 Statuses=0009 0008 10:24:11 Msec=3000 True Az=131.055 Ze=-141.555 Az status=0009 Ze status=0008 10:24:11 Check angles 10:24:11 SkyScan query 10:24:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 10:24:12 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 10:24:12 Message to Master queued w/err=0: serial=218337 error=0 10:24:17 Received message from Master: op=Filter serial=218338 10:24:17 Color wheel filter change from 0 to 0 10:24:17 FLIGetFilterPos err=0 currentPosition=0 10:24:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:17 Filter is already there-color wheel unchanged 10:24:17 Received message from Master: op=Shutter serial=218339 10:24:17 Shutter LASER close 10:24:17 Received message from Camera: op=State serial=218341 10:24:17 GetSingleValue result=40 Value=cccccccc 10:24:17 SkyScan query 10:24:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:24:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:18 Parameters OK 10:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:18 Set A/D data flow result=40 10:24:18 Set A/D channel type result=40 10:24:18 Set A/D encoding result=40 10:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:18 Set channel filter=0.000000e+000 result=40 10:24:18 Config A/D Result=40 10:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:18 Get A/D filter: -9.255963e+061 result=40 10:24:18 Get A/D value=-858993460 result=40 10:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:18 Parameters OK 10:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:18 Set A/D data flow result=40 10:24:18 Set A/D channel type result=40 10:24:18 Set A/D encoding result=40 10:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:18 Set channel filter=0.000000e+000 result=40 10:24:18 Config A/D Result=40 10:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:18 Get A/D filter: -9.255963e+061 result=40 10:24:18 Get A/D value=-858993460 result=40 10:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:18 Aux= 10:24:18 Message to Camera, serial 218341 queued 10:24:54 Received message from Master: op=PointingHead serial=218354 10:24:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:24:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:24:55 Point started: ret=0 10:24:55 point_skyscan result=0 10:24:56 Check angles 10:24:56 SkyScan query 10:24:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 10:24:56 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 10:24:56 Check angles 10:24:56 SkyScan query 10:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:24:57 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:24:57 Message to Master queued w/err=0: serial=218354 error=0 10:25:02 Received message from Master: op=Filter serial=218355 10:25:02 Color wheel filter change from 0 to 0 10:25:02 FLIGetFilterPos err=0 currentPosition=0 10:25:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:02 Filter is already there-color wheel unchanged 10:25:02 Received message from Master: op=Shutter serial=218356 10:25:02 Shutter LASER open 10:25:02 Received message from Camera: op=State serial=218358 10:25:02 GetSingleValue result=40 Value=cccccccc 10:25:02 SkyScan query 10:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:25:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:03 Parameters OK 10:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:03 Set A/D data flow result=40 10:25:03 Set A/D channel type result=40 10:25:03 Set A/D encoding result=40 10:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:03 Set channel filter=0.000000e+000 result=40 10:25:03 Config A/D Result=40 10:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:03 Get A/D filter: -9.255963e+061 result=40 10:25:03 Get A/D value=-858993460 result=40 10:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:03 Parameters OK 10:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:03 Set A/D data flow result=40 10:25:03 Set A/D channel type result=40 10:25:03 Set A/D encoding result=40 10:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:03 Set channel filter=0.000000e+000 result=40 10:25:03 Config A/D Result=40 10:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:03 Get A/D filter: -9.255963e+061 result=40 10:25:03 Get A/D value=-858993460 result=40 10:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:03 Aux= 10:25:03 Message to Camera, serial 218358 queued 10:25:11 Received message from Master: op=Shutter serial=218368 10:25:11 Shutter LASER close 10:25:12 Received message from Master: op=PointingHead serial=218372 10:25:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:25:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:25:12 Point started: ret=0 10:25:12 point_skyscan result=0 10:25:13 Check angles 10:25:13 SkyScan query 10:25:13 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.965<-21531 Statuses=0009 0009 10:25:13 Msec=0 True Az=136.185 Ze=-142.965 Az status=0009 Ze status=0009 10:25:14 Check angles 10:25:14 SkyScan query 10:25:14 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.01<-20134 Statuses=0009 0009 10:25:14 Msec=750 True Az=153.645 Ze=-122.01 Az status=0009 Ze status=0009 10:25:14 Check angles 10:25:14 SkyScan query 10:25:15 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.085<-18739 Statuses=0009 0009 10:25:15 Msec=1500 True Az=171.24 Ze=-101.085 Az status=0009 Ze status=0009 10:25:15 Check angles 10:25:15 SkyScan query 10:25:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.145<-17343 Statuses=0008 0009 10:25:16 Msec=2250 True Az=175.995 Ze=-80.145 Az status=0008 Ze status=0009 10:25:16 Check angles 10:25:16 SkyScan query 10:25:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 10:25:17 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 10:25:17 Check angles 10:25:17 SkyScan query 10:25:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:25:17 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:25:17 Message to Master queued w/err=0: serial=218372 error=0 10:25:22 Received message from Master: op=Filter serial=218373 10:25:22 Color wheel filter change from 0 to 0 10:25:22 FLIGetFilterPos err=0 currentPosition=0 10:25:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:22 Filter is already there-color wheel unchanged 10:25:22 Received message from Master: op=Shutter serial=218374 10:25:22 Shutter LASER close 10:25:23 Received message from Camera: op=State serial=218376 10:25:23 GetSingleValue result=40 Value=cccccccc 10:25:23 SkyScan query 10:25:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:25:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:23 Parameters OK 10:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:23 Set A/D data flow result=40 10:25:23 Set A/D channel type result=40 10:25:23 Set A/D encoding result=40 10:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:23 Set channel filter=0.000000e+000 result=40 10:25:23 Config A/D Result=40 10:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:23 Get A/D filter: -9.255963e+061 result=40 10:25:23 Get A/D value=-858993460 result=40 10:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:23 Parameters OK 10:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:23 Set A/D data flow result=40 10:25:23 Set A/D channel type result=40 10:25:23 Set A/D encoding result=40 10:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:23 Set channel filter=0.000000e+000 result=40 10:25:23 Config A/D Result=40 10:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:23 Get A/D filter: -9.255963e+061 result=40 10:25:23 Get A/D value=-858993460 result=40 10:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:23 Aux= 10:25:23 Message to Camera, serial 218376 queued 10:26:00 Received message from Master: op=PointingHead serial=218389 10:26:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:26:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:26:00 Point started: ret=0 10:26:00 point_skyscan result=0 10:26:01 Check angles 10:26:01 SkyScan query 10:26:02 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.765<-13451 Statuses=0009 0009 10:26:02 Msec=0 True Az=152.955 Ze=-21.765 Az status=0009 Ze status=0009 10:26:02 Check angles 10:26:02 SkyScan query 10:26:02 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.75<-12050 Statuses=0009 0009 10:26:02 Msec=750 True Az=135.435 Ze=-0.75 Az status=0009 Ze status=0009 10:26:03 Check angles 10:26:03 SkyScan query [UTC 2018-12-17 10:26:03] 10:26:03 SkyScan query done: ret=0 az=117.96<-7864 ze=20.175<-10655 Statuses=0009 0009 10:26:03 Msec=1500 True Az=117.96 Ze=20.175 Az status=0009 Ze status=0009 10:26:03 Check angles 10:26:03 SkyScan query 10:26:04 SkyScan query done: ret=0 az=100.635<-6709 ze=41.175<-9255 Statuses=0009 0009 10:26:04 Msec=2250 True Az=100.635 Ze=41.175 Az status=0009 Ze status=0009 10:26:04 Check angles 10:26:04 SkyScan query 10:26:05 SkyScan query done: ret=0 az=85.965<-5731 ze=51.54<-8564 Statuses=0009 0008 10:26:05 Msec=3000 True Az=85.965 Ze=51.54 Az status=0009 Ze status=0008 10:26:05 Check angles 10:26:05 SkyScan query 10:26:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:26:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:26:05 Message to Master queued w/err=0: serial=218389 error=0 10:26:10 Received message from Master: op=Filter serial=218390 10:26:10 Color wheel filter change from 0 to 0 10:26:10 FLIGetFilterPos err=0 currentPosition=0 10:26:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:10 Filter is already there-color wheel unchanged 10:26:11 Received message from Master: op=Shutter serial=218391 10:26:11 Shutter LASER close 10:26:11 Received message from Camera: op=State serial=218393 10:26:11 GetSingleValue result=40 Value=cccccccc 10:26:11 SkyScan query 10:26:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:26:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:11 Parameters OK 10:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:11 Set A/D data flow result=40 10:26:11 Set A/D channel type result=40 10:26:11 Set A/D encoding result=40 10:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:11 Set channel filter=0.000000e+000 result=40 10:26:11 Config A/D Result=40 10:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:11 Get A/D filter: -9.255963e+061 result=40 10:26:11 Get A/D value=-858993460 result=40 10:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:11 Parameters OK 10:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:11 Set A/D data flow result=40 10:26:11 Set A/D channel type result=40 10:26:11 Set A/D encoding result=40 10:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:11 Set channel filter=0.000000e+000 result=40 10:26:11 Config A/D Result=40 10:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:11 Get A/D filter: -9.255963e+061 result=40 10:26:11 Get A/D value=-858993460 result=40 10:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:11 Aux= 10:26:11 Message to Camera, serial 218393 queued 10:26:48 Received message from Master: op=PointingHead serial=218406 10:26:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:26:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:26:49 Point started: ret=0 10:26:49 point_skyscan result=0 10:26:49 Check angles 10:26:49 SkyScan query 10:26:50 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 10:26:50 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 10:26:50 Check angles 10:26:50 SkyScan query 10:26:51 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 10:26:51 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 10:26:51 Check angles 10:26:51 SkyScan query 10:26:51 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 10:26:51 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 10:26:52 Check angles 10:26:52 SkyScan query 10:26:52 SkyScan query done: ret=0 az=161.685<-10779 ze=38.505<-9433 Statuses=0009 0008 10:26:52 Msec=2250 True Az=161.685 Ze=38.505 Az status=0009 Ze status=0008 10:26:52 Check angles 10:26:52 SkyScan query 10:26:53 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:26:53 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:26:53 Check angles 10:26:53 SkyScan query 10:26:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:26:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:26:54 Message to Master queued w/err=0: serial=218406 error=0 10:26:59 Received message from Master: op=Filter serial=218407 10:26:59 Color wheel filter change from 0 to 0 10:26:59 FLIGetFilterPos err=0 currentPosition=0 10:26:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:59 Filter is already there-color wheel unchanged 10:26:59 Received message from Master: op=Shutter serial=218408 10:26:59 Shutter LASER close 10:26:59 Received message from Camera: op=State serial=218410 10:26:59 GetSingleValue result=40 Value=cccccccc 10:26:59 SkyScan query 10:26:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:59 Parameters OK 10:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:59 Set A/D data flow result=40 10:26:59 Set A/D channel type result=40 10:26:59 Set A/D encoding result=40 10:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:59 Set channel filter=0.000000e+000 result=40 10:26:59 Config A/D Result=40 10:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:59 Get A/D filter: -9.255963e+061 result=40 10:26:59 Get A/D value=-858993460 result=40 10:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:59 Parameters OK 10:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:59 Set A/D data flow result=40 10:26:59 Set A/D channel type result=40 10:26:59 Set A/D encoding result=40 10:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:59 Set channel filter=0.000000e+000 result=40 10:26:59 Config A/D Result=40 10:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:59 Get A/D filter: -9.255963e+061 result=40 10:26:59 Get A/D value=-858993460 result=40 10:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:59 Aux= 10:26:59 Message to Camera, serial 218410 queued 10:27:36 Received message from Master: op=PointingHead serial=218423 10:27:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:27:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:27:37 Point started: ret=0 10:27:37 point_skyscan result=0 10:27:37 Check angles 10:27:37 SkyScan query 10:27:38 SkyScan query done: ret=0 az=153.21<-10214 ze=9.015<-11399 Statuses=0009 0009 10:27:38 Msec=0 True Az=153.21 Ze=9.015 Az status=0009 Ze status=0009 10:27:38 Check angles 10:27:38 SkyScan query 10:27:39 SkyScan query done: ret=0 az=135.81<-9054 ze=-12<-12800 Statuses=0009 0009 10:27:39 Msec=750 True Az=135.81 Ze=-12 Az status=0009 Ze status=0009 10:27:39 Check angles 10:27:39 SkyScan query 10:27:39 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.895<-14193 Statuses=0009 0009 10:27:39 Msec=1500 True Az=118.26 Ze=-32.895 Az status=0009 Ze status=0009 10:27:40 Check angles 10:27:40 SkyScan query 10:27:40 SkyScan query done: ret=0 az=100.875<-6725 ze=-51.495<-15433 Statuses=0009 0009 10:27:40 Msec=2250 True Az=100.875 Ze=-51.495 Az status=0009 Ze status=0009 10:27:40 Check angles 10:27:40 SkyScan query 10:27:41 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 10:27:41 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 10:27:41 Check angles 10:27:41 SkyScan query 10:27:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:27:42 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:27:42 Message to Master queued w/err=0: serial=218423 error=0 10:27:47 Received message from Master: op=Filter serial=218424 10:27:47 Color wheel filter change from 0 to 0 10:27:47 FLIGetFilterPos err=0 currentPosition=0 10:27:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:47 Filter is already there-color wheel unchanged 10:27:47 Received message from Master: op=Shutter serial=218425 10:27:47 Shutter LASER close 10:27:47 Received message from Camera: op=State serial=218427 10:27:47 GetSingleValue result=40 Value=cccccccc 10:27:47 SkyScan query 10:27:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:27:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:47 Parameters OK 10:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:47 Set A/D data flow result=40 10:27:47 Set A/D channel type result=40 10:27:47 Set A/D encoding result=40 10:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:47 Set channel filter=0.000000e+000 result=40 10:27:47 Config A/D Result=40 10:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:47 Get A/D filter: -9.255963e+061 result=40 10:27:47 Get A/D value=-858993460 result=40 10:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:47 Parameters OK 10:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:47 Set A/D data flow result=40 10:27:47 Set A/D channel type result=40 10:27:47 Set A/D encoding result=40 10:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:47 Set channel filter=0.000000e+000 result=40 10:27:47 Config A/D Result=40 10:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:47 Get A/D filter: -9.255963e+061 result=40 10:27:47 Get A/D value=-858993460 result=40 10:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:47 Aux= 10:27:47 Message to Camera, serial 218427 queued 10:28:24 Received message from Master: op=PointingHead serial=218440 10:28:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:28:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:28:25 Point started: ret=0 10:28:25 point_skyscan result=0 10:28:25 Check angles 10:28:25 SkyScan query 10:28:26 SkyScan query done: ret=0 az=109.125<-7275 ze=-81.315<-17421 Statuses=0009 0009 10:28:26 Msec=0 True Az=109.125 Ze=-81.315 Az status=0009 Ze status=0009 10:28:26 Check angles 10:28:26 SkyScan query 10:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 10:28:27 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 10:28:27 Check angles 10:28:27 SkyScan query 10:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 10:28:27 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 10:28:28 Check angles 10:28:28 SkyScan query 10:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 10:28:28 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 10:28:28 Check angles 10:28:28 SkyScan query 10:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.975<-23065 Statuses=0008 0009 10:28:29 Msec=3000 True Az=112.995 Ze=-165.975 Az status=0008 Ze status=0009 10:28:29 Check angles 10:28:29 SkyScan query 10:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:28:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:28:30 Message to Master queued w/err=0: serial=218440 error=0 10:28:35 Received message from Master: op=Filter serial=218441 10:28:35 Color wheel filter change from 0 to 0 10:28:35 FLIGetFilterPos err=0 currentPosition=0 10:28:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:35 Filter is already there-color wheel unchanged 10:28:35 Received message from Master: op=Shutter serial=218442 10:28:35 Shutter LASER open 10:28:35 Received message from Camera: op=State serial=218444 10:28:35 GetSingleValue result=40 Value=cccccccc 10:28:35 SkyScan query 10:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:28:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:36 Parameters OK 10:28:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:36 Set A/D data flow result=40 10:28:36 Set A/D channel type result=40 10:28:36 Set A/D encoding result=40 10:28:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:36 Set channel filter=0.000000e+000 result=40 10:28:36 Config A/D Result=40 10:28:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:36 Get A/D filter: -9.255963e+061 result=40 10:28:36 Get A/D value=-858993460 result=40 10:28:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:36 Parameters OK 10:28:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:36 Set A/D data flow result=40 10:28:36 Set A/D channel type result=40 10:28:36 Set A/D encoding result=40 10:28:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:36 Set channel filter=0.000000e+000 result=40 10:28:36 Config A/D Result=40 10:28:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:36 Get A/D filter: -9.255963e+061 result=40 10:28:36 Get A/D value=-858993460 result=40 10:28:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:36 Aux= 10:28:36 Message to Camera, serial 218444 queued 10:28:44 Received message from Master: op=Shutter serial=218454 10:28:44 Shutter LASER close 10:28:45 Received message from Master: op=PointingHead serial=218458 10:28:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:28:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:28:45 Point started: ret=0 10:28:45 point_skyscan result=0 10:28:46 Check angles 10:28:46 SkyScan query 10:28:46 SkyScan query done: ret=0 az=90.12<-6008 ze=157.485<-1501 Statuses=0009 0009 10:28:46 Msec=0 True Az=90.12 Ze=157.485 Az status=0009 Ze status=0009 10:28:46 Check angles 10:28:46 SkyScan query 10:28:47 SkyScan query done: ret=0 az=72.615<-4841 ze=136.5<-2900 Statuses=0009 0009 10:28:47 Msec=750 True Az=72.615 Ze=136.5 Az status=0009 Ze status=0009 10:28:47 Check angles 10:28:47 SkyScan query 10:28:48 SkyScan query done: ret=0 az=54.945<-3663 ze=115.14<-4324 Statuses=0009 0009 10:28:48 Msec=1500 True Az=54.945 Ze=115.14 Az status=0009 Ze status=0009 10:28:48 Check angles 10:28:48 SkyScan query 10:28:48 SkyScan query done: ret=0 az=41.025<-2735 ze=93.75<-5750 Statuses=0009 0009 10:28:48 Msec=2250 True Az=41.025 Ze=93.75 Az status=0009 Ze status=0009 10:28:49 Check angles 10:28:49 SkyScan query 10:28:49 SkyScan query done: ret=0 az=40.98<-2732 ze=72.765<-7149 Statuses=0008 0009 10:28:49 Msec=3000 True Az=40.98 Ze=72.765 Az status=0008 Ze status=0009 10:28:49 Check angles 10:28:49 SkyScan query 10:28:50 SkyScan query done: ret=0 az=40.98<-2732 ze=52.44<-8504 Statuses=0008 0009 10:28:50 Msec=3750 True Az=40.98 Ze=52.44 Az status=0008 Ze status=0009 10:28:50 Check angles 10:28:50 SkyScan query 10:28:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:28:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:28:51 Message to Master queued w/err=0: serial=218458 error=0 10:28:56 Received message from Master: op=Filter serial=218459 10:28:56 Color wheel filter change from 0 to 0 10:28:56 FLIGetFilterPos err=0 currentPosition=0 10:28:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:56 Filter is already there-color wheel unchanged 10:28:56 Received message from Master: op=Shutter serial=218460 10:28:56 Shutter LASER close 10:28:56 Received message from Camera: op=State serial=218462 10:28:56 GetSingleValue result=40 Value=cccccccc 10:28:56 SkyScan query 10:28:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:28:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:57 Parameters OK 10:28:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:57 Set A/D data flow result=40 10:28:57 Set A/D channel type result=40 10:28:57 Set A/D encoding result=40 10:28:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:57 Set channel filter=0.000000e+000 result=40 10:28:57 Config A/D Result=40 10:28:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:57 Get A/D filter: -9.255963e+061 result=40 10:28:57 Get A/D value=-858993460 result=40 10:28:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:57 Parameters OK 10:28:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:57 Set A/D data flow result=40 10:28:57 Set A/D channel type result=40 10:28:57 Set A/D encoding result=40 10:28:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:57 Set channel filter=0.000000e+000 result=40 10:28:57 Config A/D Result=40 10:28:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:57 Get A/D filter: -9.255963e+061 result=40 10:28:57 Get A/D value=-858993460 result=40 10:28:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:57 Aux= 10:28:57 Message to Camera, serial 218462 queued 10:29:33 Received message from Master: op=PointingHead serial=218475 10:29:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:29:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:29:34 Point started: ret=0 10:29:34 point_skyscan result=0 10:29:35 Check angles 10:29:35 SkyScan query 10:29:35 SkyScan query done: ret=0 az=64.32<-4288 ze=66.555<-7563 Statuses=0009 0008 10:29:35 Msec=0 True Az=64.32 Ze=66.555 Az status=0009 Ze status=0008 10:29:35 Check angles 10:29:35 SkyScan query 10:29:36 SkyScan query done: ret=0 az=81.66<-5444 ze=66.495<-7567 Statuses=0009 0008 10:29:36 Msec=750 True Az=81.66 Ze=66.495 Az status=0009 Ze status=0008 10:29:36 Check angles 10:29:36 SkyScan query 10:29:37 SkyScan query done: ret=0 az=99.255<-6617 ze=66.495<-7567 Statuses=0009 0008 10:29:37 Msec=1500 True Az=99.255 Ze=66.495 Az status=0009 Ze status=0008 10:29:37 Check angles 10:29:37 SkyScan query 10:29:37 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 10:29:37 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 10:29:38 Check angles 10:29:38 SkyScan query 10:29:38 SkyScan query done: ret=0 az=134.58<-8972 ze=66.495<-7567 Statuses=0009 0008 10:29:38 Msec=3000 True Az=134.58 Ze=66.495 Az status=0009 Ze status=0008 10:29:38 Check angles 10:29:38 SkyScan query 10:29:39 SkyScan query done: ret=0 az=152.205<-10147 ze=66.495<-7567 Statuses=0009 0008 10:29:39 Msec=3750 True Az=152.205 Ze=66.495 Az status=0009 Ze status=0008 10:29:39 Check angles 10:29:39 SkyScan query 10:29:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:29:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:29:40 Message to Master queued w/err=0: serial=218475 error=0 10:29:45 Received message from Master: op=Filter serial=218476 10:29:45 Color wheel filter change from 0 to 0 10:29:45 FLIGetFilterPos err=0 currentPosition=0 10:29:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:45 Filter is already there-color wheel unchanged 10:29:45 Received message from Master: op=Shutter serial=218477 10:29:45 Shutter LASER close 10:29:45 Received message from Camera: op=State serial=218479 10:29:45 GetSingleValue result=40 Value=cccccccc 10:29:45 SkyScan query 10:29:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:29:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:46 Parameters OK 10:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:46 Set A/D data flow result=40 10:29:46 Set A/D channel type result=40 10:29:46 Set A/D encoding result=40 10:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:46 Set channel filter=0.000000e+000 result=40 10:29:46 Config A/D Result=40 10:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:46 Get A/D filter: -9.255963e+061 result=40 10:29:46 Get A/D value=-858993460 result=40 10:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:46 Parameters OK 10:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:46 Set A/D data flow result=40 10:29:46 Set A/D channel type result=40 10:29:46 Set A/D encoding result=40 10:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:46 Set channel filter=0.000000e+000 result=40 10:29:46 Config A/D Result=40 10:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:46 Get A/D filter: -9.255963e+061 result=40 10:29:46 Get A/D value=-858993460 result=40 10:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:46 Aux= 10:29:46 Message to Camera, serial 218479 queued 10:30:22 Received message from Master: op=PointingHead serial=218492 10:30:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:30:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:30:23 Point started: ret=0 10:30:23 point_skyscan result=0 10:30:23 Check angles 10:30:23 SkyScan query 10:30:24 SkyScan query done: ret=0 az=135.12<-9008 ze=36.885<-9541 Statuses=0009 0009 10:30:24 Msec=0 True Az=135.12 Ze=36.885 Az status=0009 Ze status=0009 10:30:24 Check angles 10:30:24 SkyScan query 10:30:25 SkyScan query done: ret=0 az=117.69<-7846 ze=15.945<-10937 Statuses=0009 0009 10:30:25 Msec=750 True Az=117.69 Ze=15.945 Az status=0009 Ze status=0009 10:30:25 Check angles 10:30:25 SkyScan query 10:30:26 SkyScan query done: ret=0 az=100.26<-6684 ze=-5.025<-12335 Statuses=0009 0009 10:30:26 Msec=1500 True Az=100.26 Ze=-5.025 Az status=0009 Ze status=0009 10:30:26 Check angles 10:30:26 SkyScan query 10:30:26 SkyScan query done: ret=0 az=82.755<-5517 ze=-25.98<-13732 Statuses=0009 0009 10:30:26 Msec=2250 True Az=82.755 Ze=-25.98 Az status=0009 Ze status=0009 10:30:26 Check angles 10:30:26 SkyScan query 10:30:27 SkyScan query done: ret=0 az=65.46<-4364 ze=-38.58<-14572 Statuses=0009 0008 10:30:27 Msec=3000 True Az=65.46 Ze=-38.58 Az status=0009 Ze status=0008 10:30:27 Check angles 10:30:27 SkyScan query 10:30:28 SkyScan query done: ret=0 az=47.745<-3183 ze=-38.52<-14568 Statuses=0009 0008 10:30:28 Msec=3750 True Az=47.745 Ze=-38.52 Az status=0009 Ze status=0008 10:30:28 Check angles 10:30:28 SkyScan query 10:30:29 SkyScan query done: ret=0 az=40.965<-2731 ze=-38.505<-14567 Statuses=0008 0008 10:30:29 Msec=4500 True Az=40.965 Ze=-38.505 Az status=0008 Ze status=0008 10:30:29 Message to Master queued w/err=0: serial=218492 error=0 10:30:34 Received message from Master: op=Filter serial=218493 10:30:34 Color wheel filter change from 0 to 0 10:30:34 FLIGetFilterPos err=0 currentPosition=0 10:30:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:34 Filter is already there-color wheel unchanged 10:30:34 Received message from Master: op=Shutter serial=218494 10:30:34 Shutter LASER close 10:30:34 Received message from Camera: op=State serial=218496 10:30:34 GetSingleValue result=40 Value=cccccccc 10:30:34 SkyScan query 10:30:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:30:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:34 Parameters OK 10:30:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:34 Set A/D data flow result=40 10:30:34 Set A/D channel type result=40 10:30:34 Set A/D encoding result=40 10:30:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:34 Set channel filter=0.000000e+000 result=40 10:30:34 Config A/D Result=40 10:30:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:34 Get A/D filter: -9.255963e+061 result=40 10:30:34 Get A/D value=-858993460 result=40 10:30:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:34 Parameters OK 10:30:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:34 Set A/D data flow result=40 10:30:34 Set A/D channel type result=40 10:30:34 Set A/D encoding result=40 10:30:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:34 Set channel filter=0.000000e+000 result=40 10:30:34 Config A/D Result=40 10:30:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:34 Get A/D filter: -9.255963e+061 result=40 10:30:34 Get A/D value=-858993460 result=40 10:30:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:34 Aux= 10:30:34 Message to Camera, serial 218496 queued 10:31:11 Received message from Master: op=PointingHead serial=218509 10:31:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:31:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:31:12 Point started: ret=0 10:31:12 point_skyscan result=0 10:31:12 Check angles 10:31:12 SkyScan query 10:31:13 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.325<-16555 Statuses=0009 0009 10:31:13 Msec=0 True Az=63.975 Ze=-68.325 Az status=0009 Ze status=0009 10:31:13 Check angles 10:31:13 SkyScan query 10:31:14 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.295<-17953 Statuses=0009 0009 10:31:14 Msec=750 True Az=81.33 Ze=-89.295 Az status=0009 Ze status=0009 10:31:14 Check angles 10:31:14 SkyScan query 10:31:14 SkyScan query done: ret=0 az=98.97<-6598 ze=-110.25<-19350 Statuses=0009 0009 10:31:14 Msec=1500 True Az=98.97 Ze=-110.25 Az status=0009 Ze status=0009 10:31:15 Check angles 10:31:15 SkyScan query 10:31:15 SkyScan query done: ret=0 az=116.355<-7757 ze=-131.205<-20747 Statuses=0009 0009 10:31:15 Msec=2250 True Az=116.355 Ze=-131.205 Az status=0009 Ze status=0009 10:31:15 Check angles 10:31:15 SkyScan query 10:31:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 10:31:16 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 10:31:16 Check angles 10:31:16 SkyScan query 10:31:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 10:31:17 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 10:31:17 Message to Master queued w/err=0: serial=218509 error=0 10:31:22 Received message from Master: op=Filter serial=218510 10:31:22 Color wheel filter change from 0 to 0 10:31:22 FLIGetFilterPos err=0 currentPosition=0 10:31:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:22 Filter is already there-color wheel unchanged 10:31:22 Received message from Master: op=Shutter serial=218511 10:31:22 Shutter LASER close 10:31:22 Received message from Camera: op=State serial=218513 10:31:22 GetSingleValue result=40 Value=cccccccc 10:31:22 SkyScan query 10:31:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:31:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:22 Parameters OK 10:31:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:22 Set A/D data flow result=40 10:31:22 Set A/D channel type result=40 10:31:22 Set A/D encoding result=40 10:31:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:22 Set channel filter=0.000000e+000 result=40 10:31:22 Config A/D Result=40 10:31:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:22 Get A/D filter: -9.255963e+061 result=40 10:31:22 Get A/D value=-858993460 result=40 10:31:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:22 Parameters OK 10:31:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:22 Set A/D data flow result=40 10:31:22 Set A/D channel type result=40 10:31:22 Set A/D encoding result=40 10:31:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:22 Set channel filter=0.000000e+000 result=40 10:31:22 Config A/D Result=40 10:31:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:22 Get A/D filter: -9.255963e+061 result=40 10:31:22 Get A/D value=-858993460 result=40 10:31:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:22 Aux= 10:31:22 Message to Camera, serial 218513 queued 10:31:59 Received message from Master: op=PointingHead serial=218526 10:31:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:31:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:32:00 Point started: ret=0 10:32:00 point_skyscan result=0 10:32:00 Check angles 10:32:00 SkyScan query 10:32:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 10:32:01 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 10:32:01 Check angles 10:32:01 SkyScan query 10:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:32:02 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:32:02 Message to Master queued w/err=0: serial=218526 error=0 10:32:07 Received message from Master: op=Filter serial=218527 10:32:07 Color wheel filter change from 0 to 0 10:32:07 FLIGetFilterPos err=0 currentPosition=0 10:32:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:07 Filter is already there-color wheel unchanged 10:32:07 Received message from Master: op=Shutter serial=218528 10:32:07 Shutter LASER open 10:32:07 Received message from Camera: op=State serial=218530 10:32:07 GetSingleValue result=40 Value=cccccccc 10:32:07 SkyScan query 10:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:32:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:08 Parameters OK 10:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:08 Set A/D data flow result=40 10:32:08 Set A/D channel type result=40 10:32:08 Set A/D encoding result=40 10:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:08 Set channel filter=0.000000e+000 result=40 10:32:08 Config A/D Result=40 10:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:08 Get A/D filter: -9.255963e+061 result=40 10:32:08 Get A/D value=-858993460 result=40 10:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:08 Parameters OK 10:32:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:08 Set A/D data flow result=40 10:32:08 Set A/D channel type result=40 10:32:08 Set A/D encoding result=40 10:32:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:08 Set channel filter=0.000000e+000 result=40 10:32:08 Config A/D Result=40 10:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:08 Get A/D filter: -9.255963e+061 result=40 10:32:08 Get A/D value=-858993460 result=40 10:32:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:08 Aux= 10:32:08 Message to Camera, serial 218530 queued 10:32:16 Received message from Master: op=Shutter serial=218540 10:32:16 Shutter LASER close 10:32:17 Received message from Master: op=PointingHead serial=218544 10:32:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:32:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:32:17 Point started: ret=0 10:32:17 point_skyscan result=0 10:32:18 Check angles 10:32:18 SkyScan query 10:32:18 SkyScan query done: ret=0 az=136.14<-9076 ze=-142.995<-21533 Statuses=0009 0009 10:32:18 Msec=0 True Az=136.14 Ze=-142.995 Az status=0009 Ze status=0009 10:32:18 Check angles 10:32:18 SkyScan query 10:32:19 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.04<-20136 Statuses=0009 0009 10:32:19 Msec=750 True Az=153.6 Ze=-122.04 Az status=0009 Ze status=0009 10:32:19 Check angles 10:32:19 SkyScan query 10:32:20 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.575<-18705 Statuses=0009 0009 10:32:20 Msec=1500 True Az=171.495 Ze=-100.575 Az status=0009 Ze status=0009 10:32:20 Check angles 10:32:20 SkyScan query 10:32:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.695<-17313 Statuses=0008 0009 10:32:21 Msec=2250 True Az=176.01 Ze=-79.695 Az status=0008 Ze status=0009 10:32:21 Check angles 10:32:21 SkyScan query 10:32:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.71<-15914 Statuses=0008 0009 10:32:21 Msec=3000 True Az=176.01 Ze=-58.71 Az status=0008 Ze status=0009 10:32:22 Check angles 10:32:22 SkyScan query 10:32:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 10:32:22 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 10:32:22 Message to Master queued w/err=0: serial=218544 error=0 10:32:27 Received message from Master: op=Filter serial=218545 10:32:27 Color wheel filter change from 0 to 0 10:32:27 FLIGetFilterPos err=0 currentPosition=0 10:32:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:27 Filter is already there-color wheel unchanged 10:32:27 Received message from Master: op=Shutter serial=218546 10:32:27 Shutter LASER close 10:32:27 Received message from Camera: op=State serial=218548 10:32:27 GetSingleValue result=40 Value=cccccccc 10:32:27 SkyScan query 10:32:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:32:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:28 Parameters OK 10:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:28 Set A/D data flow result=40 10:32:28 Set A/D channel type result=40 10:32:28 Set A/D encoding result=40 10:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:28 Set channel filter=0.000000e+000 result=40 10:32:28 Config A/D Result=40 10:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:28 Get A/D filter: -9.255963e+061 result=40 10:32:28 Get A/D value=-858993460 result=40 10:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:28 Parameters OK 10:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:28 Set A/D data flow result=40 10:32:28 Set A/D channel type result=40 10:32:28 Set A/D encoding result=40 10:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:28 Set channel filter=0.000000e+000 result=40 10:32:28 Config A/D Result=40 10:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:28 Get A/D filter: -9.255963e+061 result=40 10:32:28 Get A/D value=-858993460 result=40 10:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:28 Aux= 10:32:28 Message to Camera, serial 218548 queued 10:33:05 Received message from Master: op=PointingHead serial=218561 10:33:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:33:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:33:05 Point started: ret=0 10:33:05 point_skyscan result=0 10:33:06 Check angles 10:33:06 SkyScan query 10:33:07 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.99<-13466 Statuses=0009 0009 10:33:07 Msec=0 True Az=153.165 Ze=-21.99 Az status=0009 Ze status=0009 10:33:07 Check angles 10:33:07 SkyScan query 10:33:07 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.99<-12066 Statuses=0009 0009 10:33:07 Msec=750 True Az=135.735 Ze=-0.99 Az status=0009 Ze status=0009 10:33:07 Check angles 10:33:07 SkyScan query 10:33:08 SkyScan query done: ret=0 az=118.155<-7877 ze=19.935<-10671 Statuses=0009 0009 10:33:08 Msec=1500 True Az=118.155 Ze=19.935 Az status=0009 Ze status=0009 10:33:08 Check angles 10:33:08 SkyScan query 10:33:09 SkyScan query done: ret=0 az=100.86<-6724 ze=40.935<-9271 Statuses=0009 0009 10:33:09 Msec=2250 True Az=100.86 Ze=40.935 Az status=0009 Ze status=0009 10:33:09 Check angles 10:33:09 SkyScan query 10:33:10 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 10:33:10 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 10:33:10 Check angles 10:33:10 SkyScan query 10:33:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:33:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:33:10 Message to Master queued w/err=0: serial=218561 error=0 10:33:15 Received message from Master: op=Filter serial=218562 10:33:15 Color wheel filter change from 0 to 0 10:33:15 FLIGetFilterPos err=0 currentPosition=0 10:33:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:15 Filter is already there-color wheel unchanged 10:33:15 Received message from Master: op=Shutter serial=218563 10:33:15 Shutter LASER close 10:33:15 Received message from Camera: op=State serial=218565 10:33:15 GetSingleValue result=40 Value=cccccccc 10:33:15 SkyScan query 10:33:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:33:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:16 Parameters OK 10:33:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:16 Set A/D data flow result=40 10:33:16 Set A/D channel type result=40 10:33:16 Set A/D encoding result=40 10:33:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:16 Set channel filter=0.000000e+000 result=40 10:33:16 Config A/D Result=40 10:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:16 Get A/D filter: -9.255963e+061 result=40 10:33:16 Get A/D value=-858993460 result=40 10:33:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:16 Parameters OK 10:33:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:16 Set A/D data flow result=40 10:33:16 Set A/D channel type result=40 10:33:16 Set A/D encoding result=40 10:33:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:16 Set channel filter=0.000000e+000 result=40 10:33:16 Config A/D Result=40 10:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:16 Get A/D filter: -9.255963e+061 result=40 10:33:16 Get A/D value=-858993460 result=40 10:33:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:16 Aux= 10:33:16 Message to Camera, serial 218565 queued 10:33:53 Received message from Master: op=PointingHead serial=218578 10:33:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:33:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:33:53 Point started: ret=0 10:33:53 point_skyscan result=0 10:33:54 Check angles 10:33:54 SkyScan query 10:33:55 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 10:33:55 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 10:33:55 Check angles 10:33:55 SkyScan query 10:33:55 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 10:33:55 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 10:33:55 Check angles 10:33:55 SkyScan query 10:33:56 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 10:33:56 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 10:33:56 Check angles 10:33:56 SkyScan query 10:33:57 SkyScan query done: ret=0 az=161.745<-10783 ze=38.505<-9433 Statuses=0009 0008 10:33:57 Msec=2250 True Az=161.745 Ze=38.505 Az status=0009 Ze status=0008 10:33:57 Check angles 10:33:57 SkyScan query 10:33:58 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:33:58 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:33:58 Check angles 10:33:58 SkyScan query 10:33:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:33:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:33:58 Message to Master queued w/err=0: serial=218578 error=0 10:34:03 Received message from Master: op=Filter serial=218579 10:34:03 Color wheel filter change from 0 to 0 10:34:03 FLIGetFilterPos err=0 currentPosition=0 10:34:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:03 Filter is already there-color wheel unchanged 10:34:04 Received message from Master: op=Shutter serial=218580 10:34:04 Shutter LASER close 10:34:04 Received message from Camera: op=State serial=218582 10:34:04 GetSingleValue result=40 Value=cccccccc 10:34:04 SkyScan query 10:34:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:34:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:04 Parameters OK 10:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:04 Set A/D data flow result=40 10:34:04 Set A/D channel type result=40 10:34:04 Set A/D encoding result=40 10:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:04 Set channel filter=0.000000e+000 result=40 10:34:04 Config A/D Result=40 10:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:04 Get A/D filter: -9.255963e+061 result=40 10:34:04 Get A/D value=-858993460 result=40 10:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:04 Parameters OK 10:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:04 Set A/D data flow result=40 10:34:04 Set A/D channel type result=40 10:34:04 Set A/D encoding result=40 10:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:04 Set channel filter=0.000000e+000 result=40 10:34:04 Config A/D Result=40 10:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:04 Get A/D filter: -9.255963e+061 result=40 10:34:04 Get A/D value=-858993460 result=40 10:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:04 Aux= 10:34:04 Message to Camera, serial 218582 queued 10:34:41 Received message from Master: op=PointingHead serial=218595 10:34:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:34:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:34:41 Point started: ret=0 10:34:41 point_skyscan result=0 10:34:42 Check angles 10:34:42 SkyScan query 10:34:43 SkyScan query done: ret=0 az=152.985<-10199 ze=8.67<-11422 Statuses=0009 0009 10:34:43 Msec=0 True Az=152.985 Ze=8.67 Az status=0009 Ze status=0009 10:34:43 Check angles 10:34:43 SkyScan query 10:34:43 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.315<-12821 Statuses=0009 0009 10:34:43 Msec=750 True Az=135.45 Ze=-12.315 Az status=0009 Ze status=0009 10:34:44 Check angles 10:34:44 SkyScan query 10:34:44 SkyScan query done: ret=0 az=118.05<-7870 ze=-33.225<-14215 Statuses=0009 0009 10:34:44 Msec=1500 True Az=118.05 Ze=-33.225 Az status=0009 Ze status=0009 10:34:44 Check angles 10:34:44 SkyScan query 10:34:45 SkyScan query done: ret=0 az=100.635<-6709 ze=-51.54<-15436 Statuses=0009 0009 10:34:45 Msec=2250 True Az=100.635 Ze=-51.54 Az status=0009 Ze status=0009 10:34:45 Check angles 10:34:45 SkyScan query 10:34:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 10:34:46 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 10:34:46 Check angles 10:34:46 SkyScan query 10:34:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:34:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:34:46 Message to Master queued w/err=0: serial=218595 error=0 10:34:51 Received message from Master: op=Filter serial=218596 10:34:51 Color wheel filter change from 0 to 0 10:34:51 FLIGetFilterPos err=0 currentPosition=0 10:34:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:51 Filter is already there-color wheel unchanged 10:34:52 Received message from Master: op=Shutter serial=218597 10:34:52 Shutter LASER close 10:34:52 Received message from Camera: op=State serial=218599 10:34:52 GetSingleValue result=40 Value=cccccccc 10:34:52 SkyScan query 10:34:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:34:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:52 Parameters OK 10:34:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:52 Set A/D data flow result=40 10:34:52 Set A/D channel type result=40 10:34:52 Set A/D encoding result=40 10:34:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:52 Set channel filter=0.000000e+000 result=40 10:34:52 Config A/D Result=40 10:34:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:52 Get A/D filter: -9.255963e+061 result=40 10:34:52 Get A/D value=-858993460 result=40 10:34:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:52 Parameters OK 10:34:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:52 Set A/D data flow result=40 10:34:52 Set A/D channel type result=40 10:34:52 Set A/D encoding result=40 10:34:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:52 Set channel filter=0.000000e+000 result=40 10:34:52 Config A/D Result=40 10:34:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:52 Get A/D filter: -9.255963e+061 result=40 10:34:52 Get A/D value=-858993460 result=40 10:34:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:52 Aux= 10:34:52 Message to Camera, serial 218599 queued 10:35:29 Received message from Master: op=PointingHead serial=218612 10:35:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:35:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:35:29 Point started: ret=0 10:35:29 point_skyscan result=0 10:35:30 Check angles 10:35:30 SkyScan query 10:35:31 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.27<-17418 Statuses=0009 0009 10:35:31 Msec=0 True Az=108.975 Ze=-81.27 Az status=0009 Ze status=0009 10:35:31 Check angles 10:35:31 SkyScan query 10:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 10:35:31 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 10:35:32 Check angles 10:35:32 SkyScan query 10:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.065<-20271 Statuses=0008 0009 10:35:32 Msec=1500 True Az=112.995 Ze=-124.065 Az status=0008 Ze status=0009 10:35:32 Check angles 10:35:32 SkyScan query 10:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 10:35:33 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 10:35:33 Check angles 10:35:33 SkyScan query 10:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.41<-23094 Statuses=0008 0009 10:35:34 Msec=3000 True Az=112.995 Ze=-166.41 Az status=0008 Ze status=0009 10:35:34 Check angles 10:35:34 SkyScan query 10:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:35:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:35:35 Message to Master queued w/err=0: serial=218612 error=0 10:35:40 Received message from Master: op=Filter serial=218613 10:35:40 Color wheel filter change from 0 to 0 10:35:40 FLIGetFilterPos err=0 currentPosition=0 10:35:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:40 Filter is already there-color wheel unchanged 10:35:40 Received message from Master: op=Shutter serial=218614 10:35:40 Shutter LASER open 10:35:40 Received message from Camera: op=State serial=218616 10:35:40 GetSingleValue result=40 Value=cccccccc 10:35:40 SkyScan query 10:35:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:35:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:40 Parameters OK 10:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:40 Set A/D data flow result=40 10:35:40 Set A/D channel type result=40 10:35:40 Set A/D encoding result=40 10:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:40 Set channel filter=0.000000e+000 result=40 10:35:40 Config A/D Result=40 10:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:40 Get A/D filter: -9.255963e+061 result=40 10:35:40 Get A/D value=-858993460 result=40 10:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:40 Parameters OK 10:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:40 Set A/D data flow result=40 10:35:40 Set A/D channel type result=40 10:35:40 Set A/D encoding result=40 10:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:40 Set channel filter=0.000000e+000 result=40 10:35:40 Config A/D Result=40 10:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:40 Get A/D filter: -9.255963e+061 result=40 10:35:40 Get A/D value=-858993460 result=40 10:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:40 Aux= 10:35:40 Message to Camera, serial 218616 queued 10:35:48 Received message from Master: op=Shutter serial=218625 10:35:48 Shutter LASER close 10:35:48 Received message from Master: op=PointingHead serial=218629 10:35:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:35:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:35:49 Point started: ret=0 10:35:49 point_skyscan result=0 10:35:49 Check angles 10:35:49 SkyScan query 10:35:50 SkyScan query done: ret=0 az=89.82<-5988 ze=157.08<-1528 Statuses=0009 0009 10:35:50 Msec=0 True Az=89.82 Ze=157.08 Az status=0009 Ze status=0009 10:35:50 Check angles 10:35:50 SkyScan query 10:35:51 SkyScan query done: ret=0 az=72.3<-4820 ze=136.11<-2926 Statuses=0009 0009 10:35:51 Msec=750 True Az=72.3 Ze=136.11 Az status=0009 Ze status=0009 10:35:51 Check angles 10:35:51 SkyScan query 10:35:52 SkyScan query done: ret=0 az=54.99<-3666 ze=115.185<-4321 Statuses=0009 0009 10:35:52 Msec=1500 True Az=54.99 Ze=115.185 Az status=0009 Ze status=0009 10:35:52 Check angles [UTC 2018-12-17 10:35:52] 10:35:52 SkyScan query 10:35:52 SkyScan query done: ret=0 az=40.98<-2732 ze=92.46<-5836 Statuses=0009 0009 10:35:52 Msec=2250 True Az=40.98 Ze=92.46 Az status=0009 Ze status=0009 [UTC 2018-12-17 10:35:52] 10:35:52 Check angles 10:35:52 SkyScan query 10:35:53 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 10:35:53 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 10:35:53 Check angles 10:35:53 SkyScan query 10:35:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 10:35:54 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 10:35:54 Check angles 10:35:54 SkyScan query 10:35:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:35:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:35:55 Message to Master queued w/err=0: serial=218629 error=0 10:36:00 Received message from Master: op=Filter serial=218630 10:36:00 Color wheel filter change from 0 to 0 10:36:00 FLIGetFilterPos err=0 currentPosition=0 10:36:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:00 Filter is already there-color wheel unchanged 10:36:00 Received message from Master: op=Shutter serial=218631 10:36:00 Shutter LASER close 10:36:00 Received message from Camera: op=State serial=218633 10:36:00 GetSingleValue result=40 Value=cccccccc 10:36:00 SkyScan query 10:36:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:36:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:00 Parameters OK 10:36:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:00 Set A/D data flow result=40 10:36:00 Set A/D channel type result=40 10:36:00 Set A/D encoding result=40 10:36:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:00 Set channel filter=0.000000e+000 result=40 10:36:00 Config A/D Result=40 10:36:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:00 Get A/D filter: -9.255963e+061 result=40 10:36:00 Get A/D value=-858993460 result=40 10:36:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:00 Parameters OK 10:36:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:00 Set A/D data flow result=40 10:36:00 Set A/D channel type result=40 10:36:00 Set A/D encoding result=40 10:36:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:00 Set channel filter=0.000000e+000 result=40 10:36:00 Config A/D Result=40 10:36:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:00 Get A/D filter: -9.255963e+061 result=40 10:36:00 Get A/D value=-858993460 result=40 10:36:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:00 Aux= 10:36:00 Message to Camera, serial 218633 queued 10:36:37 Received message from Master: op=PointingHead serial=218646 10:36:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:36:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:36:38 Point started: ret=0 10:36:38 point_skyscan result=0 10:36:38 Check angles 10:36:38 SkyScan query 10:36:39 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 10:36:39 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 10:36:39 Check angles 10:36:39 SkyScan query 10:36:40 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 10:36:40 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 10:36:40 Check angles 10:36:40 SkyScan query 10:36:41 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 10:36:41 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 10:36:41 Check angles 10:36:41 SkyScan query 10:36:41 SkyScan query done: ret=0 az=116.535<-7769 ze=66.495<-7567 Statuses=0009 0008 10:36:41 Msec=2250 True Az=116.535 Ze=66.495 Az status=0009 Ze status=0008 10:36:41 Check angles 10:36:41 SkyScan query 10:36:42 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 10:36:42 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 10:36:42 Check angles 10:36:42 SkyScan query 10:36:43 SkyScan query done: ret=0 az=151.455<-10097 ze=66.495<-7567 Statuses=0009 0008 10:36:43 Msec=3750 True Az=151.455 Ze=66.495 Az status=0009 Ze status=0008 10:36:43 Check angles 10:36:43 SkyScan query 10:36:44 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:36:44 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:36:44 Message to Master queued w/err=0: serial=218646 error=0 10:36:49 Received message from Master: op=Filter serial=218647 10:36:49 Color wheel filter change from 0 to 0 10:36:49 FLIGetFilterPos err=0 currentPosition=0 10:36:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:49 Filter is already there-color wheel unchanged 10:36:49 Received message from Master: op=Shutter serial=218648 10:36:49 Shutter LASER close 10:36:49 Received message from Camera: op=State serial=218650 10:36:49 GetSingleValue result=40 Value=cccccccc 10:36:49 SkyScan query 10:36:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:36:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:49 Parameters OK 10:36:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:49 Set A/D data flow result=40 10:36:49 Set A/D channel type result=40 10:36:49 Set A/D encoding result=40 10:36:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:49 Set channel filter=0.000000e+000 result=40 10:36:49 Config A/D Result=40 10:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:49 Get A/D filter: -9.255963e+061 result=40 10:36:49 Get A/D value=-858993460 result=40 10:36:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:49 Parameters OK 10:36:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:49 Set A/D data flow result=40 10:36:49 Set A/D channel type result=40 10:36:49 Set A/D encoding result=40 10:36:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:49 Set channel filter=0.000000e+000 result=40 10:36:49 Config A/D Result=40 10:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:49 Get A/D filter: -9.255963e+061 result=40 10:36:49 Get A/D value=-858993460 result=40 10:36:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:49 Aux= 10:36:49 Message to Camera, serial 218650 queued 10:37:26 Received message from Master: op=PointingHead serial=218663 10:37:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:37:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:37:26 Point started: ret=0 10:37:26 point_skyscan result=0 10:37:27 Check angles 10:37:27 SkyScan query 10:37:28 SkyScan query done: ret=0 az=135.105<-9007 ze=36.84<-9544 Statuses=0009 0009 10:37:28 Msec=0 True Az=135.105 Ze=36.84 Az status=0009 Ze status=0009 10:37:28 Check angles 10:37:28 SkyScan query 10:37:29 SkyScan query done: ret=0 az=117.57<-7838 ze=15.9<-10940 Statuses=0009 0009 10:37:29 Msec=750 True Az=117.57 Ze=15.9 Az status=0009 Ze status=0009 10:37:29 Check angles 10:37:29 SkyScan query 10:37:29 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.07<-12338 Statuses=0009 0009 10:37:29 Msec=1500 True Az=100.2 Ze=-5.07 Az status=0009 Ze status=0009 10:37:29 Check angles 10:37:29 SkyScan query 10:37:30 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.025<-13735 Statuses=0009 0009 10:37:30 Msec=2250 True Az=82.65 Ze=-26.025 Az status=0009 Ze status=0009 10:37:30 Check angles 10:37:30 SkyScan query 10:37:31 SkyScan query done: ret=0 az=65.295<-4353 ze=-38.58<-14572 Statuses=0009 0008 10:37:31 Msec=3000 True Az=65.295 Ze=-38.58 Az status=0009 Ze status=0008 10:37:31 Check angles 10:37:31 SkyScan query 10:37:32 SkyScan query done: ret=0 az=47.745<-3183 ze=-38.52<-14568 Statuses=0009 0008 10:37:32 Msec=3750 True Az=47.745 Ze=-38.52 Az status=0009 Ze status=0008 10:37:32 Check angles 10:37:32 SkyScan query 10:37:32 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 10:37:32 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 10:37:32 Message to Master queued w/err=0: serial=218663 error=0 10:37:37 Received message from Master: op=Filter serial=218664 10:37:37 Color wheel filter change from 0 to 0 10:37:37 FLIGetFilterPos err=0 currentPosition=0 10:37:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:37 Filter is already there-color wheel unchanged 10:37:37 Received message from Master: op=Shutter serial=218665 10:37:37 Shutter LASER close 10:37:38 Received message from Camera: op=State serial=218667 10:37:38 GetSingleValue result=40 Value=cccccccc 10:37:38 SkyScan query 10:37:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:37:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:38 Parameters OK 10:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:38 Set A/D data flow result=40 10:37:38 Set A/D channel type result=40 10:37:38 Set A/D encoding result=40 10:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:38 Set channel filter=0.000000e+000 result=40 10:37:38 Config A/D Result=40 10:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:38 Get A/D filter: -9.255963e+061 result=40 10:37:38 Get A/D value=-858993460 result=40 10:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:38 Parameters OK 10:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:38 Set A/D data flow result=40 10:37:38 Set A/D channel type result=40 10:37:38 Set A/D encoding result=40 10:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:38 Set channel filter=0.000000e+000 result=40 10:37:38 Config A/D Result=40 10:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:38 Get A/D filter: -9.255963e+061 result=40 10:37:38 Get A/D value=-858993460 result=40 10:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:38 Aux= 10:37:38 Message to Camera, serial 218667 queued 10:38:15 Received message from Master: op=PointingHead serial=218680 10:38:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:38:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:38:15 Point started: ret=0 10:38:15 point_skyscan result=0 10:38:16 Check angles 10:38:16 SkyScan query 10:38:17 SkyScan query done: ret=0 az=64.335<-4289 ze=-68.64<-16576 Statuses=0009 0009 10:38:17 Msec=0 True Az=64.335 Ze=-68.64 Az status=0009 Ze status=0009 10:38:17 Check angles 10:38:17 SkyScan query 10:38:17 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.595<-17973 Statuses=0009 0009 10:38:17 Msec=750 True Az=81.81 Ze=-89.595 Az status=0009 Ze status=0009 10:38:18 Check angles 10:38:18 SkyScan query 10:38:18 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.58<-19372 Statuses=0009 0009 10:38:18 Msec=1500 True Az=99.36 Ze=-110.58 Az status=0009 Ze status=0009 10:38:18 Check angles 10:38:18 SkyScan query 10:38:19 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.49<-20766 Statuses=0009 0009 10:38:19 Msec=2250 True Az=116.73 Ze=-131.49 Az status=0009 Ze status=0009 10:38:19 Check angles 10:38:19 SkyScan query 10:38:20 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 10:38:20 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 10:38:20 Check angles 10:38:20 SkyScan query 10:38:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:38:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:38:20 Message to Master queued w/err=0: serial=218680 error=0 10:38:25 Received message from Master: op=Filter serial=218681 10:38:25 Color wheel filter change from 0 to 0 10:38:25 FLIGetFilterPos err=0 currentPosition=0 10:38:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:25 Filter is already there-color wheel unchanged 10:38:26 Received message from Master: op=Shutter serial=218682 10:38:26 Shutter LASER close 10:38:26 Received message from Camera: op=State serial=218684 10:38:26 GetSingleValue result=40 Value=cccccccc 10:38:26 SkyScan query 10:38:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:38:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:26 Parameters OK 10:38:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:26 Set A/D data flow result=40 10:38:26 Set A/D channel type result=40 10:38:26 Set A/D encoding result=40 10:38:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:26 Set channel filter=0.000000e+000 result=40 10:38:26 Config A/D Result=40 10:38:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:26 Get A/D filter: -9.255963e+061 result=40 10:38:26 Get A/D value=-858993460 result=40 10:38:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:26 Parameters OK 10:38:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:26 Set A/D data flow result=40 10:38:26 Set A/D channel type result=40 10:38:26 Set A/D encoding result=40 10:38:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:26 Set channel filter=0.000000e+000 result=40 10:38:26 Config A/D Result=40 10:38:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:26 Get A/D filter: -9.255963e+061 result=40 10:38:26 Get A/D value=-858993460 result=40 10:38:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:26 Aux= 10:38:26 Message to Camera, serial 218684 queued 10:39:03 Received message from Master: op=PointingHead serial=218697 10:39:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:39:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:39:03 Point started: ret=0 10:39:03 point_skyscan result=0 10:39:04 Check angles 10:39:04 SkyScan query 10:39:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 10:39:05 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 10:39:05 Check angles 10:39:05 SkyScan query 10:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:39:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:39:05 Message to Master queued w/err=0: serial=218697 error=0 10:39:10 Received message from Master: op=Filter serial=218698 10:39:10 Color wheel filter change from 0 to 0 10:39:10 FLIGetFilterPos err=0 currentPosition=0 10:39:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:10 Filter is already there-color wheel unchanged 10:39:11 Received message from Master: op=Shutter serial=218699 10:39:11 Shutter LASER open 10:39:11 Received message from Camera: op=State serial=218701 10:39:11 GetSingleValue result=40 Value=cccccccc 10:39:11 SkyScan query 10:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:39:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:11 Parameters OK 10:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:11 Set A/D data flow result=40 10:39:11 Set A/D channel type result=40 10:39:11 Set A/D encoding result=40 10:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:11 Set channel filter=0.000000e+000 result=40 10:39:11 Config A/D Result=40 10:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:11 Get A/D filter: -9.255963e+061 result=40 10:39:11 Get A/D value=-858993460 result=40 10:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:11 Parameters OK 10:39:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:11 Set A/D data flow result=40 10:39:11 Set A/D channel type result=40 10:39:11 Set A/D encoding result=40 10:39:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:11 Set channel filter=0.000000e+000 result=40 10:39:11 Config A/D Result=40 10:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:11 Get A/D filter: -9.255963e+061 result=40 10:39:11 Get A/D value=-858993460 result=40 10:39:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:11 Aux= 10:39:11 Message to Camera, serial 218701 queued 10:39:19 Received message from Master: op=Shutter serial=218710 10:39:19 Shutter LASER close 10:39:19 Received message from Master: op=PointingHead serial=218714 10:39:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:39:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:39:20 Point started: ret=0 10:39:20 point_skyscan result=0 10:39:21 Check angles 10:39:21 SkyScan query 10:39:21 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.71<-21514 Statuses=0009 0009 10:39:21 Msec=0 True Az=136.38 Ze=-142.71 Az status=0009 Ze status=0009 10:39:21 Check angles 10:39:21 SkyScan query 10:39:22 SkyScan query done: ret=0 az=154.245<-10283 ze=-121.335<-20089 Statuses=0009 0009 10:39:22 Msec=750 True Az=154.245 Ze=-121.335 Az status=0009 Ze status=0009 10:39:22 Check angles 10:39:22 SkyScan query 10:39:23 SkyScan query done: ret=0 az=171.675<-11445 ze=-100.305<-18687 Statuses=0009 0009 10:39:23 Msec=1500 True Az=171.675 Ze=-100.305 Az status=0009 Ze status=0009 10:39:23 Check angles 10:39:23 SkyScan query 10:39:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 10:39:23 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 10:39:24 Check angles 10:39:24 SkyScan query 10:39:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.005<-15867 Statuses=0008 0009 10:39:24 Msec=3000 True Az=176.01 Ze=-58.005 Az status=0008 Ze status=0009 10:39:24 Check angles 10:39:24 SkyScan query 10:39:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 10:39:25 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 10:39:25 Message to Master queued w/err=0: serial=218714 error=0 10:39:30 Received message from Master: op=Filter serial=218715 10:39:30 Color wheel filter change from 0 to 0 10:39:30 FLIGetFilterPos err=0 currentPosition=0 10:39:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:30 Filter is already there-color wheel unchanged 10:39:30 Received message from Master: op=Shutter serial=218716 10:39:30 Shutter LASER close 10:39:30 Received message from Camera: op=State serial=218718 10:39:30 GetSingleValue result=40 Value=cccccccc 10:39:30 SkyScan query 10:39:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:39:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:31 Parameters OK 10:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:31 Set A/D data flow result=40 10:39:31 Set A/D channel type result=40 10:39:31 Set A/D encoding result=40 10:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:31 Set channel filter=0.000000e+000 result=40 10:39:31 Config A/D Result=40 10:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:31 Get A/D filter: -9.255963e+061 result=40 10:39:31 Get A/D value=-858993460 result=40 10:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:31 Parameters OK 10:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:31 Set A/D data flow result=40 10:39:31 Set A/D channel type result=40 10:39:31 Set A/D encoding result=40 10:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:31 Set channel filter=0.000000e+000 result=40 10:39:31 Config A/D Result=40 10:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:31 Get A/D filter: -9.255963e+061 result=40 10:39:31 Get A/D value=-858993460 result=40 10:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:31 Aux= 10:39:31 Message to Camera, serial 218718 queued 10:40:08 Received message from Master: op=PointingHead serial=218731 10:40:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:40:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:40:08 Point started: ret=0 10:40:08 point_skyscan result=0 10:40:09 Check angles 10:40:09 SkyScan query 10:40:09 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.435<-13429 Statuses=0009 0009 10:40:09 Msec=0 True Az=152.745 Ze=-21.435 Az status=0009 Ze status=0009 10:40:10 Check angles 10:40:10 SkyScan query 10:40:10 SkyScan query done: ret=0 az=134.865<-8991 ze=-0.045<-12003 Statuses=0009 0009 10:40:10 Msec=750 True Az=134.865 Ze=-0.045 Az status=0009 Ze status=0009 10:40:10 Check angles 10:40:10 SkyScan query 10:40:11 SkyScan query done: ret=0 az=117.375<-7825 ze=20.925<-10605 Statuses=0009 0009 10:40:11 Msec=1500 True Az=117.375 Ze=20.925 Az status=0009 Ze status=0009 10:40:11 Check angles 10:40:11 SkyScan query 10:40:12 SkyScan query done: ret=0 az=99.99<-6666 ze=41.865<-9209 Statuses=0009 0009 10:40:12 Msec=2250 True Az=99.99 Ze=41.865 Az status=0009 Ze status=0009 10:40:12 Check angles 10:40:12 SkyScan query 10:40:12 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:40:12 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:40:13 Check angles 10:40:13 SkyScan query 10:40:13 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 10:40:13 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 10:40:13 Message to Master queued w/err=0: serial=218731 error=0 10:40:18 Received message from Master: op=Filter serial=218732 10:40:18 Color wheel filter change from 0 to 0 10:40:18 FLIGetFilterPos err=0 currentPosition=0 10:40:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:18 Filter is already there-color wheel unchanged 10:40:18 Received message from Master: op=Shutter serial=218733 10:40:18 Shutter LASER close 10:40:18 Received message from Camera: op=State serial=218735 10:40:18 GetSingleValue result=40 Value=cccccccc 10:40:18 SkyScan query 10:40:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:40:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:19 Parameters OK 10:40:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:19 Set A/D data flow result=40 10:40:19 Set A/D channel type result=40 10:40:19 Set A/D encoding result=40 10:40:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:19 Set channel filter=0.000000e+000 result=40 10:40:19 Config A/D Result=40 10:40:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:19 Get A/D filter: -9.255963e+061 result=40 10:40:19 Get A/D value=-858993460 result=40 10:40:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:19 Parameters OK 10:40:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:19 Set A/D data flow result=40 10:40:19 Set A/D channel type result=40 10:40:19 Set A/D encoding result=40 10:40:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:19 Set channel filter=0.000000e+000 result=40 10:40:19 Config A/D Result=40 10:40:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:19 Get A/D filter: -9.255963e+061 result=40 10:40:19 Get A/D value=-858993460 result=40 10:40:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:19 Aux= 10:40:19 Message to Camera, serial 218735 queued 10:40:56 Received message from Master: op=PointingHead serial=218748 10:40:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:40:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:40:56 Point started: ret=0 10:40:56 point_skyscan result=0 10:40:57 Check angles 10:40:57 SkyScan query 10:40:58 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 10:40:58 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 10:40:58 Check angles 10:40:58 SkyScan query 10:40:58 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 10:40:58 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 10:40:58 Check angles 10:40:58 SkyScan query 10:40:59 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 10:40:59 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 10:40:59 Check angles 10:40:59 SkyScan query 10:41:00 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 10:41:00 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 10:41:00 Check angles 10:41:00 SkyScan query 10:41:01 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:41:01 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:41:01 Check angles 10:41:01 SkyScan query 10:41:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:41:01 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:41:01 Message to Master queued w/err=0: serial=218748 error=0 10:41:06 Received message from Master: op=Filter serial=218749 10:41:06 Color wheel filter change from 0 to 0 10:41:06 FLIGetFilterPos err=0 currentPosition=0 10:41:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:06 Filter is already there-color wheel unchanged 10:41:06 Received message from Master: op=Shutter serial=218750 10:41:06 Shutter LASER close 10:41:06 Received message from Camera: op=State serial=218752 10:41:06 GetSingleValue result=40 Value=cccccccc 10:41:06 SkyScan query 10:41:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:41:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:07 Parameters OK 10:41:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:07 Set A/D data flow result=40 10:41:07 Set A/D channel type result=40 10:41:07 Set A/D encoding result=40 10:41:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:07 Set channel filter=0.000000e+000 result=40 10:41:07 Config A/D Result=40 10:41:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:07 Get A/D filter: -9.255963e+061 result=40 10:41:07 Get A/D value=-858993460 result=40 10:41:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:07 Parameters OK 10:41:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:07 Set A/D data flow result=40 10:41:07 Set A/D channel type result=40 10:41:07 Set A/D encoding result=40 10:41:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:07 Set channel filter=0.000000e+000 result=40 10:41:07 Config A/D Result=40 10:41:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:07 Get A/D filter: -9.255963e+061 result=40 10:41:07 Get A/D value=-858993460 result=40 10:41:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:07 Aux= 10:41:07 Message to Camera, serial 218752 queued 10:41:44 Received message from Master: op=PointingHead serial=218765 10:41:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:41:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:41:44 Point started: ret=0 10:41:44 point_skyscan result=0 10:41:45 Check angles 10:41:45 SkyScan query 10:41:46 SkyScan query done: ret=0 az=153.195<-10213 ze=9<-11400 Statuses=0009 0009 10:41:46 Msec=0 True Az=153.195 Ze=9 Az status=0009 Ze status=0009 10:41:46 Check angles 10:41:46 SkyScan query 10:41:46 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.36<-12824 Statuses=0009 0009 10:41:46 Msec=750 True Az=135.405 Ze=-12.36 Az status=0009 Ze status=0009 10:41:46 Check angles 10:41:46 SkyScan query 10:41:47 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.33<-14222 Statuses=0009 0009 10:41:47 Msec=1500 True Az=117.795 Ze=-33.33 Az status=0009 Ze status=0009 10:41:47 Check angles 10:41:47 SkyScan query 10:41:48 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 10:41:48 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 10:41:48 Check angles 10:41:48 SkyScan query 10:41:49 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 10:41:49 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 10:41:49 Check angles 10:41:49 SkyScan query 10:41:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:41:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:41:49 Message to Master queued w/err=0: serial=218765 error=0 10:41:54 Received message from Master: op=Filter serial=218766 10:41:54 Color wheel filter change from 0 to 0 10:41:54 FLIGetFilterPos err=0 currentPosition=0 10:41:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:54 Filter is already there-color wheel unchanged 10:41:54 Received message from Master: op=Shutter serial=218767 10:41:54 Shutter LASER close 10:41:55 Received message from Camera: op=State serial=218769 10:41:55 GetSingleValue result=40 Value=cccccccc 10:41:55 SkyScan query 10:41:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:41:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:55 Parameters OK 10:41:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:55 Set A/D data flow result=40 10:41:55 Set A/D channel type result=40 10:41:55 Set A/D encoding result=40 10:41:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:55 Set channel filter=0.000000e+000 result=40 10:41:55 Config A/D Result=40 10:41:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:55 Get A/D filter: -9.255963e+061 result=40 10:41:55 Get A/D value=-858993460 result=40 10:41:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:55 Parameters OK 10:41:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:55 Set A/D data flow result=40 10:41:55 Set A/D channel type result=40 10:41:55 Set A/D encoding result=40 10:41:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:55 Set channel filter=0.000000e+000 result=40 10:41:55 Config A/D Result=40 10:41:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:55 Get A/D filter: -9.255963e+061 result=40 10:41:55 Get A/D value=-858993460 result=40 10:41:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:55 Aux= 10:41:55 Message to Camera, serial 218769 queued 10:42:32 Received message from Master: op=PointingHead serial=218782 10:42:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:42:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:42:32 Point started: ret=0 10:42:32 point_skyscan result=0 10:42:33 Check angles 10:42:33 SkyScan query 10:42:34 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.66<-17444 Statuses=0009 0009 10:42:34 Msec=0 True Az=109.35 Ze=-81.66 Az status=0009 Ze status=0009 10:42:34 Check angles 10:42:34 SkyScan query 10:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.035<-18869 Statuses=0008 0009 10:42:34 Msec=750 True Az=112.995 Ze=-103.035 Az status=0008 Ze status=0009 10:42:35 Check angles 10:42:35 SkyScan query 10:42:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.99<-20266 Statuses=0008 0009 10:42:35 Msec=1500 True Az=112.995 Ze=-123.99 Az status=0008 Ze status=0009 10:42:35 Check angles 10:42:35 SkyScan query 10:42:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.915<-21661 Statuses=0008 0009 10:42:36 Msec=2250 True Az=112.995 Ze=-144.915 Az status=0008 Ze status=0009 10:42:36 Check angles 10:42:36 SkyScan query 10:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.32<-23088 Statuses=0008 0009 10:42:37 Msec=3000 True Az=112.995 Ze=-166.32 Az status=0008 Ze status=0009 10:42:37 Check angles 10:42:37 SkyScan query 10:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:42:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:42:37 Message to Master queued w/err=0: serial=218782 error=0 10:42:42 Received message from Master: op=Filter serial=218783 10:42:42 Color wheel filter change from 0 to 0 10:42:42 FLIGetFilterPos err=0 currentPosition=0 10:42:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:42 Filter is already there-color wheel unchanged 10:42:43 Received message from Master: op=Shutter serial=218784 10:42:43 Shutter LASER open 10:42:43 Received message from Camera: op=State serial=218786 10:42:43 GetSingleValue result=40 Value=cccccccc 10:42:43 SkyScan query 10:42:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:42:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:43 Parameters OK 10:42:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:43 Set A/D data flow result=40 10:42:43 Set A/D channel type result=40 10:42:43 Set A/D encoding result=40 10:42:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:43 Set channel filter=0.000000e+000 result=40 10:42:43 Config A/D Result=40 10:42:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:43 Get A/D filter: -9.255963e+061 result=40 10:42:43 Get A/D value=-858993460 result=40 10:42:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:43 Parameters OK 10:42:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:43 Set A/D data flow result=40 10:42:43 Set A/D channel type result=40 10:42:43 Set A/D encoding result=40 10:42:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:43 Set channel filter=0.000000e+000 result=40 10:42:43 Config A/D Result=40 10:42:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:43 Get A/D filter: -9.255963e+061 result=40 10:42:43 Get A/D value=-858993460 result=40 10:42:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:43 Aux= 10:42:43 Message to Camera, serial 218786 queued 10:42:52 Received message from Master: op=Shutter serial=218796 10:42:52 Shutter LASER close 10:42:52 Received message from Master: op=PointingHead serial=218800 10:42:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:42:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:42:53 Point started: ret=0 10:42:53 point_skyscan result=0 10:42:53 Check angles 10:42:53 SkyScan query 10:42:54 SkyScan query done: ret=0 az=89.865<-5991 ze=157.23<-1518 Statuses=0009 0009 10:42:54 Msec=0 True Az=89.865 Ze=157.23 Az status=0009 Ze status=0009 10:42:54 Check angles 10:42:54 SkyScan query 10:42:55 SkyScan query done: ret=0 az=72.015<-4801 ze=135.825<-2945 Statuses=0009 0009 10:42:55 Msec=750 True Az=72.015 Ze=135.825 Az status=0009 Ze status=0009 10:42:55 Check angles 10:42:55 SkyScan query 10:42:55 SkyScan query done: ret=0 az=54.375<-3625 ze=114.375<-4375 Statuses=0009 0009 10:42:55 Msec=1500 True Az=54.375 Ze=114.375 Az status=0009 Ze status=0009 10:42:56 Check angles 10:42:56 SkyScan query 10:42:56 SkyScan query done: ret=0 az=40.965<-2731 ze=93.48<-5768 Statuses=0009 0009 10:42:56 Msec=2250 True Az=40.965 Ze=93.48 Az status=0009 Ze status=0009 10:42:56 Check angles 10:42:56 SkyScan query 10:42:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.48<-7168 Statuses=0008 0009 10:42:57 Msec=3000 True Az=40.995 Ze=72.48 Az status=0008 Ze status=0009 10:42:57 Check angles 10:42:57 SkyScan query 10:42:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 10:42:58 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 10:42:58 Check angles 10:42:58 SkyScan query 10:42:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:42:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:42:58 Message to Master queued w/err=0: serial=218800 error=0 10:43:03 Received message from Master: op=Filter serial=218801 10:43:03 Color wheel filter change from 0 to 0 10:43:03 FLIGetFilterPos err=0 currentPosition=0 10:43:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:03 Filter is already there-color wheel unchanged 10:43:04 Received message from Master: op=Shutter serial=218802 10:43:04 Shutter LASER close 10:43:04 Received message from Camera: op=State serial=218804 10:43:04 GetSingleValue result=40 Value=cccccccc 10:43:04 SkyScan query 10:43:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:43:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:04 Parameters OK 10:43:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:04 Set A/D data flow result=40 10:43:04 Set A/D channel type result=40 10:43:04 Set A/D encoding result=40 10:43:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:04 Set channel filter=0.000000e+000 result=40 10:43:04 Config A/D Result=40 10:43:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:04 Get A/D filter: -9.255963e+061 result=40 10:43:04 Get A/D value=-858993460 result=40 10:43:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:04 Parameters OK 10:43:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:04 Set A/D data flow result=40 10:43:04 Set A/D channel type result=40 10:43:04 Set A/D encoding result=40 10:43:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:04 Set channel filter=0.000000e+000 result=40 10:43:04 Config A/D Result=40 10:43:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:04 Get A/D filter: -9.255963e+061 result=40 10:43:04 Get A/D value=-858993460 result=40 10:43:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:04 Aux= 10:43:04 Message to Camera, serial 218804 queued 10:43:41 Received message from Master: op=PointingHead serial=218817 10:43:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:43:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:43:42 Point started: ret=0 10:43:42 point_skyscan result=0 10:43:42 Check angles 10:43:42 SkyScan query 10:43:43 SkyScan query done: ret=0 az=64.185<-4279 ze=66.54<-7564 Statuses=0009 0008 10:43:43 Msec=0 True Az=64.185 Ze=66.54 Az status=0009 Ze status=0008 10:43:43 Check angles 10:43:43 SkyScan query 10:43:44 SkyScan query done: ret=0 az=81.63<-5442 ze=66.51<-7566 Statuses=0009 0008 10:43:44 Msec=750 True Az=81.63 Ze=66.51 Az status=0009 Ze status=0008 10:43:44 Check angles 10:43:44 SkyScan query 10:43:44 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 10:43:44 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 10:43:45 Check angles 10:43:45 SkyScan query 10:43:45 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 10:43:45 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 10:43:45 Check angles 10:43:45 SkyScan query 10:43:46 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 10:43:46 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 10:43:46 Check angles 10:43:46 SkyScan query 10:43:47 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 10:43:47 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 10:43:47 Check angles 10:43:47 SkyScan query 10:43:47 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:43:47 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:43:47 Message to Master queued w/err=0: serial=218817 error=0 10:43:52 Received message from Master: op=Filter serial=218818 10:43:52 Color wheel filter change from 0 to 0 10:43:52 FLIGetFilterPos err=0 currentPosition=0 10:43:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:52 Filter is already there-color wheel unchanged 10:43:53 Received message from Master: op=Shutter serial=218819 10:43:53 Shutter LASER close 10:43:53 Received message from Camera: op=State serial=218821 10:43:53 GetSingleValue result=40 Value=cccccccc 10:43:53 SkyScan query 10:43:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:43:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:53 Parameters OK 10:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:53 Set A/D data flow result=40 10:43:53 Set A/D channel type result=40 10:43:53 Set A/D encoding result=40 10:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:53 Set channel filter=0.000000e+000 result=40 10:43:53 Config A/D Result=40 10:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:53 Get A/D filter: -9.255963e+061 result=40 10:43:53 Get A/D value=-858993460 result=40 10:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:53 Parameters OK 10:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:53 Set A/D data flow result=40 10:43:53 Set A/D channel type result=40 10:43:53 Set A/D encoding result=40 10:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:53 Set channel filter=0.000000e+000 result=40 10:43:53 Config A/D Result=40 10:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:53 Get A/D filter: -9.255963e+061 result=40 10:43:53 Get A/D value=-858993460 result=40 10:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:53 Aux= 10:43:53 Message to Camera, serial 218821 queued 10:44:30 Received message from Master: op=PointingHead serial=218834 10:44:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:44:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:44:30 Point started: ret=0 10:44:30 point_skyscan result=0 10:44:31 Check angles 10:44:31 SkyScan query 10:44:32 SkyScan query done: ret=0 az=134.805<-8987 ze=36.615<-9559 Statuses=0009 0009 10:44:32 Msec=0 True Az=134.805 Ze=36.615 Az status=0009 Ze status=0009 10:44:32 Check angles 10:44:32 SkyScan query 10:44:32 SkyScan query done: ret=0 az=117.3<-7820 ze=15.645<-10957 Statuses=0009 0009 10:44:32 Msec=750 True Az=117.3 Ze=15.645 Az status=0009 Ze status=0009 10:44:33 Check angles 10:44:33 SkyScan query 10:44:33 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.31<-12354 Statuses=0009 0009 10:44:33 Msec=1500 True Az=99.945 Ze=-5.31 Az status=0009 Ze status=0009 10:44:33 Check angles 10:44:33 SkyScan query 10:44:34 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.715<-13781 Statuses=0009 0009 10:44:34 Msec=2250 True Az=82.125 Ze=-26.715 Az status=0009 Ze status=0009 10:44:34 Check angles 10:44:34 SkyScan query 10:44:35 SkyScan query done: ret=0 az=64.2<-4280 ze=-38.58<-14572 Statuses=0009 0008 10:44:35 Msec=3000 True Az=64.2 Ze=-38.58 Az status=0009 Ze status=0008 10:44:35 Check angles 10:44:35 SkyScan query 10:44:35 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.52<-14568 Statuses=0009 0008 10:44:35 Msec=3750 True Az=47.025 Ze=-38.52 Az status=0009 Ze status=0008 10:44:36 Check angles 10:44:36 SkyScan query 10:44:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:44:36 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:44:36 Message to Master queued w/err=0: serial=218834 error=0 10:44:41 Received message from Master: op=Filter serial=218835 10:44:41 Color wheel filter change from 0 to 0 10:44:41 FLIGetFilterPos err=0 currentPosition=0 10:44:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:41 Filter is already there-color wheel unchanged 10:44:41 Received message from Master: op=Shutter serial=218836 10:44:41 Shutter LASER close 10:44:41 Received message from Camera: op=State serial=218838 10:44:41 GetSingleValue result=40 Value=cccccccc 10:44:41 SkyScan query 10:44:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:44:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:42 Parameters OK 10:44:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:42 Set A/D data flow result=40 10:44:42 Set A/D channel type result=40 10:44:42 Set A/D encoding result=40 10:44:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:42 Set channel filter=0.000000e+000 result=40 10:44:42 Config A/D Result=40 10:44:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:42 Get A/D filter: -9.255963e+061 result=40 10:44:42 Get A/D value=-858993460 result=40 10:44:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:42 Parameters OK 10:44:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:42 Set A/D data flow result=40 10:44:42 Set A/D channel type result=40 10:44:42 Set A/D encoding result=40 10:44:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:42 Set channel filter=0.000000e+000 result=40 10:44:42 Config A/D Result=40 10:44:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:42 Get A/D filter: -9.255963e+061 result=40 10:44:42 Get A/D value=-858993460 result=40 10:44:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:42 Aux= 10:44:42 Message to Camera, serial 218838 queued 10:45:19 Received message from Master: op=PointingHead serial=218851 10:45:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:45:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:45:19 Point started: ret=0 10:45:19 point_skyscan result=0 10:45:20 Check angles 10:45:20 SkyScan query 10:45:21 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.25<-16550 Statuses=0009 0009 10:45:21 Msec=0 True Az=63.96 Ze=-68.25 Az status=0009 Ze status=0009 10:45:21 Check angles 10:45:21 SkyScan query 10:45:21 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.25<-17950 Statuses=0009 0009 10:45:21 Msec=750 True Az=81.315 Ze=-89.25 Az status=0009 Ze status=0009 10:45:22 Check angles 10:45:22 SkyScan query 10:45:22 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.175<-19345 Statuses=0009 0009 10:45:22 Msec=1500 True Az=98.895 Ze=-110.175 Az status=0009 Ze status=0009 10:45:22 Check angles 10:45:22 SkyScan query 10:45:23 SkyScan query done: ret=0 az=116.34<-7756 ze=-131.145<-20743 Statuses=0009 0009 10:45:23 Msec=2250 True Az=116.34 Ze=-131.145 Az status=0009 Ze status=0009 10:45:23 Check angles 10:45:23 SkyScan query 10:45:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 10:45:24 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 10:45:24 Check angles 10:45:24 SkyScan query 10:45:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:45:24 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:45:24 Message to Master queued w/err=0: serial=218851 error=0 10:45:27 Received message from Master: op=Identify serial=218852 10:45:29 Received message from Master: op=Filter serial=218855 10:45:29 Color wheel filter change from 0 to 0 10:45:29 FLIGetFilterPos err=0 currentPosition=0 10:45:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:29 Filter is already there-color wheel unchanged 10:45:30 Received message from Master: op=Shutter serial=218856 10:45:30 Shutter LASER close 10:45:30 Received message from Camera: op=State serial=218858 10:45:30 GetSingleValue result=40 Value=cccccccc 10:45:30 SkyScan query 10:45:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:45:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:30 Parameters OK 10:45:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:30 Set A/D data flow result=40 10:45:30 Set A/D channel type result=40 10:45:30 Set A/D encoding result=40 10:45:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:30 Set channel filter=0.000000e+000 result=40 10:45:30 Config A/D Result=40 10:45:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:30 Get A/D filter: -9.255963e+061 result=40 10:45:30 Get A/D value=-858993460 result=40 10:45:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:30 Parameters OK 10:45:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:30 Set A/D data flow result=40 10:45:30 Set A/D channel type result=40 10:45:30 Set A/D encoding result=40 10:45:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:30 Set channel filter=0.000000e+000 result=40 10:45:30 Config A/D Result=40 10:45:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:30 Get A/D filter: -9.255963e+061 result=40 10:45:30 Get A/D value=-858993460 result=40 10:45:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:30 Aux= 10:45:30 Message to Camera, serial 218858 queued 10:46:07 Received message from Master: op=PointingHead serial=218871 10:46:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:46:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:46:07 Point started: ret=0 10:46:07 point_skyscan result=0 10:46:08 Check angles 10:46:08 SkyScan query 10:46:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 10:46:09 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 10:46:09 Check angles 10:46:09 SkyScan query 10:46:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:46:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 [UTC 2018-12-17 10:46:09] 10:46:09 Message to Master queued w/err=0: serial=218871 error=0 10:46:14 Received message from Master: op=Filter serial=218872 10:46:14 Color wheel filter change from 0 to 0 10:46:14 FLIGetFilterPos err=0 currentPosition=0 10:46:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:14 Filter is already there-color wheel unchanged 10:46:15 Received message from Master: op=Shutter serial=218873 10:46:15 Shutter LASER open 10:46:15 Received message from Camera: op=State serial=218875 10:46:15 GetSingleValue result=40 Value=cccccccc 10:46:15 SkyScan query 10:46:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:46:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:15 Parameters OK 10:46:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:15 Set A/D data flow result=40 10:46:15 Set A/D channel type result=40 10:46:15 Set A/D encoding result=40 10:46:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:15 Set channel filter=0.000000e+000 result=40 10:46:15 Config A/D Result=40 10:46:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:15 Get A/D filter: -9.255963e+061 result=40 10:46:15 Get A/D value=-858993460 result=40 10:46:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:15 Parameters OK 10:46:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:15 Set A/D data flow result=40 10:46:15 Set A/D channel type result=40 10:46:15 Set A/D encoding result=40 10:46:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:15 Set channel filter=0.000000e+000 result=40 10:46:15 Config A/D Result=40 10:46:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:15 Get A/D filter: -9.255963e+061 result=40 10:46:15 Get A/D value=-858993460 result=40 10:46:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:15 Aux= 10:46:15 Message to Camera, serial 218875 queued 10:46:24 Received message from Master: op=Shutter serial=218885 10:46:24 Shutter LASER close 10:46:24 Received message from Master: op=PointingHead serial=218889 10:46:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:46:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:46:25 Point started: ret=0 10:46:25 point_skyscan result=0 10:46:25 Check angles 10:46:25 SkyScan query 10:46:26 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.725<-21515 Statuses=0009 0009 10:46:26 Msec=0 True Az=136.365 Ze=-142.725 Az status=0009 Ze status=0009 10:46:26 Check angles 10:46:26 SkyScan query 10:46:27 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.86<-20124 Statuses=0009 0009 10:46:27 Msec=750 True Az=153.78 Ze=-121.86 Az status=0009 Ze status=0009 10:46:27 Check angles 10:46:27 SkyScan query 10:46:28 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.935<-18729 Statuses=0009 0009 10:46:28 Msec=1500 True Az=171.27 Ze=-100.935 Az status=0009 Ze status=0009 10:46:28 Check angles 10:46:28 SkyScan query 10:46:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.01<-17334 Statuses=0008 0009 10:46:28 Msec=2250 True Az=176.01 Ze=-80.01 Az status=0008 Ze status=0009 10:46:29 Check angles 10:46:29 SkyScan query 10:46:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.56<-15904 Statuses=0008 0009 10:46:29 Msec=3000 True Az=176.01 Ze=-58.56 Az status=0008 Ze status=0009 10:46:29 Check angles 10:46:29 SkyScan query 10:46:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:46:30 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:46:30 Message to Master queued w/err=0: serial=218889 error=0 10:46:35 Received message from Master: op=Filter serial=218890 10:46:35 Color wheel filter change from 0 to 0 10:46:35 FLIGetFilterPos err=0 currentPosition=0 10:46:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:35 Filter is already there-color wheel unchanged 10:46:35 Received message from Master: op=Shutter serial=218891 10:46:35 Shutter LASER close 10:46:35 Received message from Camera: op=State serial=218893 10:46:35 GetSingleValue result=40 Value=cccccccc 10:46:35 SkyScan query 10:46:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:46:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:36 Parameters OK 10:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:36 Set A/D data flow result=40 10:46:36 Set A/D channel type result=40 10:46:36 Set A/D encoding result=40 10:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:36 Set channel filter=0.000000e+000 result=40 10:46:36 Config A/D Result=40 10:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:36 Get A/D filter: -9.255963e+061 result=40 10:46:36 Get A/D value=-858993460 result=40 10:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:36 Parameters OK 10:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:36 Set A/D data flow result=40 10:46:36 Set A/D channel type result=40 10:46:36 Set A/D encoding result=40 10:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:36 Set channel filter=0.000000e+000 result=40 10:46:36 Config A/D Result=40 10:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:36 Get A/D filter: -9.255963e+061 result=40 10:46:36 Get A/D value=-858993460 result=40 10:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:36 Aux= 10:46:36 Message to Camera, serial 218893 queued 10:47:13 Received message from Master: op=PointingHead serial=218906 10:47:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:47:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:47:13 Point started: ret=0 10:47:13 point_skyscan result=0 10:47:14 Check angles 10:47:14 SkyScan query 10:47:14 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.495<-13433 Statuses=0009 0009 10:47:14 Msec=0 True Az=152.745 Ze=-21.495 Az status=0009 Ze status=0009 10:47:14 Check angles 10:47:14 SkyScan query 10:47:15 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.525<-12035 Statuses=0009 0009 10:47:15 Msec=750 True Az=135.345 Ze=-0.525 Az status=0009 Ze status=0009 10:47:15 Check angles 10:47:15 SkyScan query 10:47:16 SkyScan query done: ret=0 az=117.765<-7851 ze=20.385<-10641 Statuses=0009 0009 10:47:16 Msec=1500 True Az=117.765 Ze=20.385 Az status=0009 Ze status=0009 10:47:16 Check angles 10:47:16 SkyScan query 10:47:17 SkyScan query done: ret=0 az=100.44<-6696 ze=41.385<-9241 Statuses=0009 0009 10:47:17 Msec=2250 True Az=100.44 Ze=41.385 Az status=0009 Ze status=0009 10:47:17 Check angles 10:47:17 SkyScan query 10:47:17 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 10:47:17 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 10:47:17 Check angles 10:47:17 SkyScan query 10:47:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:47:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:47:18 Message to Master queued w/err=0: serial=218906 error=0 10:47:23 Received message from Master: op=Filter serial=218907 10:47:23 Color wheel filter change from 0 to 0 10:47:23 FLIGetFilterPos err=0 currentPosition=0 10:47:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:23 Filter is already there-color wheel unchanged 10:47:23 Received message from Master: op=Shutter serial=218908 10:47:23 Shutter LASER close 10:47:23 Received message from Camera: op=State serial=218910 10:47:23 GetSingleValue result=40 Value=cccccccc 10:47:23 SkyScan query 10:47:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:47:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:24 Parameters OK 10:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:24 Set A/D data flow result=40 10:47:24 Set A/D channel type result=40 10:47:24 Set A/D encoding result=40 10:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:24 Set channel filter=0.000000e+000 result=40 10:47:24 Config A/D Result=40 10:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:24 Get A/D filter: -9.255963e+061 result=40 10:47:24 Get A/D value=-858993460 result=40 10:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:24 Parameters OK 10:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:24 Set A/D data flow result=40 10:47:24 Set A/D channel type result=40 10:47:24 Set A/D encoding result=40 10:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:24 Set channel filter=0.000000e+000 result=40 10:47:24 Config A/D Result=40 10:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:24 Get A/D filter: -9.255963e+061 result=40 10:47:24 Get A/D value=-858993460 result=40 10:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:24 Aux= 10:47:24 Message to Camera, serial 218910 queued 10:48:01 Received message from Master: op=PointingHead serial=218923 10:48:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:48:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:48:01 Point started: ret=0 10:48:01 point_skyscan result=0 10:48:02 Check angles 10:48:02 SkyScan query 10:48:02 SkyScan query done: ret=0 az=109.5<-7300 ze=38.49<-9434 Statuses=0009 0008 10:48:02 Msec=0 True Az=109.5 Ze=38.49 Az status=0009 Ze status=0008 10:48:02 Check angles 10:48:02 SkyScan query 10:48:03 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 10:48:03 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 10:48:03 Check angles 10:48:03 SkyScan query 10:48:04 SkyScan query done: ret=0 az=144.48<-9632 ze=38.505<-9433 Statuses=0009 0008 10:48:04 Msec=1500 True Az=144.48 Ze=38.505 Az status=0009 Ze status=0008 10:48:04 Check angles 10:48:04 SkyScan query 10:48:05 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 10:48:05 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 10:48:05 Check angles 10:48:05 SkyScan query 10:48:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:48:05 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:48:06 Check angles 10:48:06 SkyScan query 10:48:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:48:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:48:06 Message to Master queued w/err=0: serial=218923 error=0 10:48:11 Received message from Master: op=Filter serial=218924 10:48:11 Color wheel filter change from 0 to 0 10:48:11 FLIGetFilterPos err=0 currentPosition=0 10:48:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:11 Filter is already there-color wheel unchanged 10:48:11 Received message from Master: op=Shutter serial=218925 10:48:11 Shutter LASER close 10:48:11 Received message from Camera: op=State serial=218927 10:48:11 GetSingleValue result=40 Value=cccccccc 10:48:11 SkyScan query 10:48:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:48:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:12 Parameters OK 10:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:12 Set A/D data flow result=40 10:48:12 Set A/D channel type result=40 10:48:12 Set A/D encoding result=40 10:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:12 Set channel filter=0.000000e+000 result=40 10:48:12 Config A/D Result=40 10:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:12 Get A/D filter: -9.255963e+061 result=40 10:48:12 Get A/D value=-858993460 result=40 10:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:12 Parameters OK 10:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:12 Set A/D data flow result=40 10:48:12 Set A/D channel type result=40 10:48:12 Set A/D encoding result=40 10:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:12 Set channel filter=0.000000e+000 result=40 10:48:12 Config A/D Result=40 10:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:12 Get A/D filter: -9.255963e+061 result=40 10:48:12 Get A/D value=-858993460 result=40 10:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:12 Aux= 10:48:12 Message to Camera, serial 218927 queued 10:48:49 Received message from Master: op=PointingHead serial=218940 10:48:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:48:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:48:49 Point started: ret=0 10:48:49 point_skyscan result=0 10:48:50 Check angles 10:48:50 SkyScan query 10:48:50 SkyScan query done: ret=0 az=153.135<-10209 ze=8.91<-11406 Statuses=0009 0009 10:48:50 Msec=0 True Az=153.135 Ze=8.91 Az status=0009 Ze status=0009 10:48:51 Check angles 10:48:51 SkyScan query 10:48:51 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.06<-12804 Statuses=0009 0009 10:48:51 Msec=750 True Az=135.705 Ze=-12.06 Az status=0009 Ze status=0009 10:48:51 Check angles 10:48:51 SkyScan query 10:48:52 SkyScan query done: ret=0 az=118.17<-7878 ze=-32.985<-14199 Statuses=0009 0009 10:48:52 Msec=1500 True Az=118.17 Ze=-32.985 Az status=0009 Ze status=0009 10:48:52 Check angles 10:48:52 SkyScan query 10:48:53 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.555<-15437 Statuses=0009 0009 10:48:53 Msec=2250 True Az=100.44 Ze=-51.555 Az status=0009 Ze status=0009 10:48:53 Check angles 10:48:53 SkyScan query 10:48:53 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:48:53 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:48:54 Check angles 10:48:54 SkyScan query 10:48:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:48:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:48:54 Message to Master queued w/err=0: serial=218940 error=0 10:48:59 Received message from Master: op=Filter serial=218941 10:48:59 Color wheel filter change from 0 to 0 10:48:59 FLIGetFilterPos err=0 currentPosition=0 10:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:59 Filter is already there-color wheel unchanged 10:48:59 Received message from Master: op=Shutter serial=218942 10:48:59 Shutter LASER close 10:48:59 Received message from Camera: op=State serial=218944 10:48:59 GetSingleValue result=40 Value=cccccccc 10:48:59 SkyScan query 10:49:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:49:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:00 Parameters OK 10:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:00 Set A/D data flow result=40 10:49:00 Set A/D channel type result=40 10:49:00 Set A/D encoding result=40 10:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:00 Set channel filter=0.000000e+000 result=40 10:49:00 Config A/D Result=40 10:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:00 Get A/D filter: -9.255963e+061 result=40 10:49:00 Get A/D value=-858993460 result=40 10:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:00 Parameters OK 10:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:00 Set A/D data flow result=40 10:49:00 Set A/D channel type result=40 10:49:00 Set A/D encoding result=40 10:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:00 Set channel filter=0.000000e+000 result=40 10:49:00 Config A/D Result=40 10:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:00 Get A/D filter: -9.255963e+061 result=40 10:49:00 Get A/D value=-858993460 result=40 10:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:00 Aux= 10:49:00 Message to Camera, serial 218944 queued 10:49:37 Received message from Master: op=PointingHead serial=218957 10:49:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:49:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:49:37 Point started: ret=0 10:49:37 point_skyscan result=0 10:49:38 Check angles 10:49:38 SkyScan query 10:49:38 SkyScan query done: ret=0 az=109.335<-7289 ze=-81.57<-17438 Statuses=0009 0009 10:49:38 Msec=0 True Az=109.335 Ze=-81.57 Az status=0009 Ze status=0009 10:49:39 Check angles 10:49:39 SkyScan query 10:49:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 10:49:39 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 10:49:39 Check angles 10:49:39 SkyScan query 10:49:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 10:49:40 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 10:49:40 Check angles 10:49:40 SkyScan query 10:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 10:49:41 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 10:49:41 Check angles 10:49:41 SkyScan query 10:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 10:49:41 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 10:49:42 Check angles 10:49:42 SkyScan query 10:49:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:49:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:49:42 Message to Master queued w/err=0: serial=218957 error=0 10:49:47 Received message from Master: op=Filter serial=218958 10:49:47 Color wheel filter change from 0 to 0 10:49:47 FLIGetFilterPos err=0 currentPosition=0 10:49:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:47 Filter is already there-color wheel unchanged 10:49:47 Received message from Master: op=Shutter serial=218959 10:49:47 Shutter LASER open 10:49:48 Received message from Camera: op=State serial=218961 10:49:48 GetSingleValue result=40 Value=cccccccc 10:49:48 SkyScan query 10:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:49:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:48 Parameters OK 10:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:48 Set A/D data flow result=40 10:49:48 Set A/D channel type result=40 10:49:48 Set A/D encoding result=40 10:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:48 Set channel filter=0.000000e+000 result=40 10:49:48 Config A/D Result=40 10:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:48 Get A/D filter: -9.255963e+061 result=40 10:49:48 Get A/D value=-858993460 result=40 10:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:48 Parameters OK 10:49:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:48 Set A/D data flow result=40 10:49:48 Set A/D channel type result=40 10:49:48 Set A/D encoding result=40 10:49:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:48 Set channel filter=0.000000e+000 result=40 10:49:48 Config A/D Result=40 10:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:48 Get A/D filter: -9.255963e+061 result=40 10:49:48 Get A/D value=-858993460 result=40 10:49:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:48 Aux= 10:49:48 Message to Camera, serial 218961 queued 10:49:56 Received message from Master: op=Shutter serial=218970 10:49:56 Shutter LASER close 10:49:56 Received message from Master: op=PointingHead serial=218974 10:49:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:49:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:49:56 Point started: ret=0 10:49:56 point_skyscan result=0 10:49:57 Check angles 10:49:57 SkyScan query 10:49:58 SkyScan query done: ret=0 az=90.18<-6012 ze=157.5<-1500 Statuses=0009 0009 10:49:58 Msec=0 True Az=90.18 Ze=157.5 Az status=0009 Ze status=0009 10:49:58 Check angles 10:49:58 SkyScan query 10:49:58 SkyScan query done: ret=0 az=72.18<-4812 ze=136.11<-2926 Statuses=0009 0009 10:49:58 Msec=750 True Az=72.18 Ze=136.11 Az status=0009 Ze status=0009 10:49:59 Check angles 10:49:59 SkyScan query 10:49:59 SkyScan query done: ret=0 az=54.885<-3659 ze=115.155<-4323 Statuses=0009 0009 10:49:59 Msec=1500 True Az=54.885 Ze=115.155 Az status=0009 Ze status=0009 10:49:59 Check angles 10:49:59 SkyScan query 10:50:00 SkyScan query done: ret=0 az=40.95<-2730 ze=94.2<-5720 Statuses=0009 0009 10:50:00 Msec=2250 True Az=40.95 Ze=94.2 Az status=0009 Ze status=0009 10:50:00 Check angles 10:50:00 SkyScan query 10:50:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 10:50:01 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 10:50:01 Check angles 10:50:01 SkyScan query 10:50:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 10:50:02 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 10:50:02 Check angles 10:50:02 SkyScan query 10:50:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:50:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:50:02 Message to Master queued w/err=0: serial=218974 error=0 10:50:07 Received message from Master: op=Filter serial=218975 10:50:07 Color wheel filter change from 0 to 0 10:50:07 FLIGetFilterPos err=0 currentPosition=0 10:50:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:07 Filter is already there-color wheel unchanged 10:50:07 Received message from Master: op=Shutter serial=218976 10:50:07 Shutter LASER close 10:50:08 Received message from Camera: op=State serial=218978 10:50:08 GetSingleValue result=40 Value=cccccccc 10:50:08 SkyScan query 10:50:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:50:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:08 Parameters OK 10:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:08 Set A/D data flow result=40 10:50:08 Set A/D channel type result=40 10:50:08 Set A/D encoding result=40 10:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:08 Set channel filter=0.000000e+000 result=40 10:50:08 Config A/D Result=40 10:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:08 Get A/D filter: -9.255963e+061 result=40 10:50:08 Get A/D value=-858993460 result=40 10:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:08 Parameters OK 10:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:08 Set A/D data flow result=40 10:50:08 Set A/D channel type result=40 10:50:08 Set A/D encoding result=40 10:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:08 Set channel filter=0.000000e+000 result=40 10:50:08 Config A/D Result=40 10:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:08 Get A/D filter: -9.255963e+061 result=40 10:50:08 Get A/D value=-858993460 result=40 10:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:08 Aux= 10:50:08 Message to Camera, serial 218978 queued 10:50:45 Received message from Master: op=PointingHead serial=218991 10:50:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:50:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:50:45 Point started: ret=0 10:50:45 point_skyscan result=0 10:50:46 Check angles 10:50:46 SkyScan query 10:50:47 SkyScan query done: ret=0 az=64.365<-4291 ze=66.54<-7564 Statuses=0009 0008 10:50:47 Msec=0 True Az=64.365 Ze=66.54 Az status=0009 Ze status=0008 10:50:47 Check angles 10:50:47 SkyScan query 10:50:47 SkyScan query done: ret=0 az=81.885<-5459 ze=66.51<-7566 Statuses=0009 0008 10:50:47 Msec=750 True Az=81.885 Ze=66.51 Az status=0009 Ze status=0008 10:50:48 Check angles 10:50:48 SkyScan query 10:50:48 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 10:50:48 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 10:50:48 Check angles 10:50:48 SkyScan query 10:50:49 SkyScan query done: ret=0 az=117.345<-7823 ze=66.495<-7567 Statuses=0009 0008 10:50:49 Msec=2250 True Az=117.345 Ze=66.495 Az status=0009 Ze status=0008 10:50:49 Check angles 10:50:49 SkyScan query 10:50:50 SkyScan query done: ret=0 az=135.105<-9007 ze=66.495<-7567 Statuses=0009 0008 10:50:50 Msec=3000 True Az=135.105 Ze=66.495 Az status=0009 Ze status=0008 10:50:50 Check angles 10:50:50 SkyScan query 10:50:50 SkyScan query done: ret=0 az=152.325<-10155 ze=66.495<-7567 Statuses=0009 0008 10:50:50 Msec=3750 True Az=152.325 Ze=66.495 Az status=0009 Ze status=0008 10:50:51 Check angles 10:50:51 SkyScan query 10:50:51 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:50:51 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:50:51 Message to Master queued w/err=0: serial=218991 error=0 10:50:56 Received message from Master: op=Filter serial=218992 10:50:56 Color wheel filter change from 0 to 0 10:50:56 FLIGetFilterPos err=0 currentPosition=0 10:50:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:56 Filter is already there-color wheel unchanged 10:50:56 Received message from Master: op=Shutter serial=218993 10:50:56 Shutter LASER close 10:50:56 Received message from Camera: op=State serial=218995 10:50:56 GetSingleValue result=40 Value=cccccccc 10:50:56 SkyScan query 10:50:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:50:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:57 Parameters OK 10:50:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:57 Set A/D data flow result=40 10:50:57 Set A/D channel type result=40 10:50:57 Set A/D encoding result=40 10:50:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:57 Set channel filter=0.000000e+000 result=40 10:50:57 Config A/D Result=40 10:50:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:57 Get A/D filter: -9.255963e+061 result=40 10:50:57 Get A/D value=-858993460 result=40 10:50:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:57 Parameters OK 10:50:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:57 Set A/D data flow result=40 10:50:57 Set A/D channel type result=40 10:50:57 Set A/D encoding result=40 10:50:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:57 Set channel filter=0.000000e+000 result=40 10:50:57 Config A/D Result=40 10:50:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:57 Get A/D filter: -9.255963e+061 result=40 10:50:57 Get A/D value=-858993460 result=40 10:50:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:57 Aux= 10:50:57 Message to Camera, serial 218995 queued 10:51:34 Received message from Master: op=PointingHead serial=219008 10:51:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:51:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:51:34 Point started: ret=0 10:51:34 point_skyscan result=0 10:51:35 Check angles 10:51:35 SkyScan query 10:51:36 SkyScan query done: ret=0 az=135.195<-9013 ze=36.96<-9536 Statuses=0009 0009 10:51:36 Msec=0 True Az=135.195 Ze=36.96 Az status=0009 Ze status=0009 10:51:36 Check angles 10:51:36 SkyScan query 10:51:36 SkyScan query done: ret=0 az=117.735<-7849 ze=15.975<-10935 Statuses=0009 0009 10:51:36 Msec=750 True Az=117.735 Ze=15.975 Az status=0009 Ze status=0009 10:51:36 Check angles 10:51:36 SkyScan query 10:51:37 SkyScan query done: ret=0 az=100.32<-6688 ze=-4.95<-12330 Statuses=0009 0009 10:51:37 Msec=1500 True Az=100.32 Ze=-4.95 Az status=0009 Ze status=0009 10:51:37 Check angles 10:51:37 SkyScan query 10:51:38 SkyScan query done: ret=0 az=82.77<-5518 ze=-25.89<-13726 Statuses=0009 0009 10:51:38 Msec=2250 True Az=82.77 Ze=-25.89 Az status=0009 Ze status=0009 10:51:38 Check angles 10:51:38 SkyScan query 10:51:39 SkyScan query done: ret=0 az=65.34<-4356 ze=-38.58<-14572 Statuses=0009 0008 10:51:39 Msec=3000 True Az=65.34 Ze=-38.58 Az status=0009 Ze status=0008 10:51:39 Check angles 10:51:39 SkyScan query 10:51:39 SkyScan query done: ret=0 az=47.88<-3192 ze=-38.535<-14569 Statuses=0009 0008 10:51:39 Msec=3750 True Az=47.88 Ze=-38.535 Az status=0009 Ze status=0008 10:51:39 Check angles 10:51:39 SkyScan query 10:51:40 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 10:51:40 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 10:51:40 Message to Master queued w/err=0: serial=219008 error=0 10:51:45 Received message from Master: op=Filter serial=219009 10:51:45 Color wheel filter change from 0 to 0 10:51:45 FLIGetFilterPos err=0 currentPosition=0 10:51:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:45 Filter is already there-color wheel unchanged 10:51:45 Received message from Master: op=Shutter serial=219010 10:51:45 Shutter LASER close 10:51:45 Received message from Camera: op=State serial=219012 10:51:45 GetSingleValue result=40 Value=cccccccc 10:51:45 SkyScan query 10:51:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:46 Parameters OK 10:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:46 Set A/D data flow result=40 10:51:46 Set A/D channel type result=40 10:51:46 Set A/D encoding result=40 10:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:46 Set channel filter=0.000000e+000 result=40 10:51:46 Config A/D Result=40 10:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:46 Get A/D filter: -9.255963e+061 result=40 10:51:46 Get A/D value=-858993460 result=40 10:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:46 Parameters OK 10:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:46 Set A/D data flow result=40 10:51:46 Set A/D channel type result=40 10:51:46 Set A/D encoding result=40 10:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:46 Set channel filter=0.000000e+000 result=40 10:51:46 Config A/D Result=40 10:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:46 Get A/D filter: -9.255963e+061 result=40 10:51:46 Get A/D value=-858993460 result=40 10:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:46 Aux= 10:51:46 Message to Camera, serial 219012 queued 10:52:23 Received message from Master: op=PointingHead serial=219025 10:52:23 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:52:23 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:52:23 Point started: ret=0 10:52:23 point_skyscan result=0 10:52:24 Check angles 10:52:24 SkyScan query 10:52:24 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.175<-16545 Statuses=0009 0009 10:52:24 Msec=0 True Az=64.05 Ze=-68.175 Az status=0009 Ze status=0009 10:52:24 Check angles 10:52:24 SkyScan query 10:52:25 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.145<-17943 Statuses=0009 0009 10:52:25 Msec=750 True Az=81.39 Ze=-89.145 Az status=0009 Ze status=0009 10:52:25 Check angles 10:52:25 SkyScan query 10:52:26 SkyScan query done: ret=0 az=99.015<-6601 ze=-110.085<-19339 Statuses=0009 0009 10:52:26 Msec=1500 True Az=99.015 Ze=-110.085 Az status=0009 Ze status=0009 10:52:26 Check angles 10:52:26 SkyScan query 10:52:27 SkyScan query done: ret=0 az=116.475<-7765 ze=-131.055<-20737 Statuses=0009 0009 10:52:27 Msec=2250 True Az=116.475 Ze=-131.055 Az status=0009 Ze status=0009 10:52:27 Check angles 10:52:27 SkyScan query 10:52:27 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 10:52:27 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 10:52:27 Check angles 10:52:27 SkyScan query 10:52:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:52:28 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:52:28 Message to Master queued w/err=0: serial=219025 error=0 10:52:33 Received message from Master: op=Filter serial=219026 10:52:33 Color wheel filter change from 0 to 0 10:52:33 FLIGetFilterPos err=0 currentPosition=0 10:52:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:33 Filter is already there-color wheel unchanged 10:52:33 Received message from Master: op=Shutter serial=219027 10:52:33 Shutter LASER close 10:52:33 Received message from Camera: op=State serial=219029 10:52:33 GetSingleValue result=40 Value=cccccccc 10:52:33 SkyScan query 10:52:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:52:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:34 Parameters OK 10:52:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:34 Set A/D data flow result=40 10:52:34 Set A/D channel type result=40 10:52:34 Set A/D encoding result=40 10:52:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:34 Set channel filter=0.000000e+000 result=40 10:52:34 Config A/D Result=40 10:52:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:34 Get A/D filter: -9.255963e+061 result=40 10:52:34 Get A/D value=-858993460 result=40 10:52:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:34 Parameters OK 10:52:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:34 Set A/D data flow result=40 10:52:34 Set A/D channel type result=40 10:52:34 Set A/D encoding result=40 10:52:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:34 Set channel filter=0.000000e+000 result=40 10:52:34 Config A/D Result=40 10:52:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:34 Get A/D filter: -9.255963e+061 result=40 10:52:34 Get A/D value=-858993460 result=40 10:52:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:34 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:34 Aux= 10:52:34 Message to Camera, serial 219029 queued 10:53:11 Received message from Master: op=PointingHead serial=219042 10:53:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:53:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:53:11 Point started: ret=0 10:53:11 point_skyscan result=0 10:53:12 Check angles 10:53:12 SkyScan query 10:53:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 10:53:12 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 10:53:13 Check angles 10:53:13 SkyScan query 10:53:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:53:13 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:53:13 Message to Master queued w/err=0: serial=219042 error=0 10:53:18 Received message from Master: op=Filter serial=219043 10:53:18 Color wheel filter change from 0 to 0 10:53:18 FLIGetFilterPos err=0 currentPosition=0 10:53:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:18 Filter is already there-color wheel unchanged 10:53:18 Received message from Master: op=Shutter serial=219044 10:53:18 Shutter LASER open 10:53:18 Received message from Camera: op=State serial=219046 10:53:18 GetSingleValue result=40 Value=cccccccc 10:53:18 SkyScan query 10:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:53:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:19 Parameters OK 10:53:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:19 Set A/D data flow result=40 10:53:19 Set A/D channel type result=40 10:53:19 Set A/D encoding result=40 10:53:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:19 Set channel filter=0.000000e+000 result=40 10:53:19 Config A/D Result=40 10:53:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:19 Get A/D filter: -9.255963e+061 result=40 10:53:19 Get A/D value=-858993460 result=40 10:53:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:19 Parameters OK 10:53:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:19 Set A/D data flow result=40 10:53:19 Set A/D channel type result=40 10:53:19 Set A/D encoding result=40 10:53:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:19 Set channel filter=0.000000e+000 result=40 10:53:19 Config A/D Result=40 10:53:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:19 Get A/D filter: -9.255963e+061 result=40 10:53:19 Get A/D value=-858993460 result=40 10:53:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:19 Aux= 10:53:19 Message to Camera, serial 219046 queued 10:53:27 Received message from Master: op=Shutter serial=219056 10:53:27 Shutter LASER close 10:53:28 Received message from Master: op=PointingHead serial=219060 10:53:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:53:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:53:28 Point started: ret=0 10:53:28 point_skyscan result=0 10:53:29 Check angles 10:53:29 SkyScan query 10:53:30 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.785<-21519 Statuses=0009 0009 10:53:30 Msec=0 True Az=136.365 Ze=-142.785 Az status=0009 Ze status=0009 10:53:30 Check angles 10:53:30 SkyScan query 10:53:30 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.845<-20123 Statuses=0009 0009 10:53:30 Msec=750 True Az=153.795 Ze=-121.845 Az status=0009 Ze status=0009 10:53:31 Check angles 10:53:31 SkyScan query 10:53:31 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.365<-18691 Statuses=0009 0009 10:53:31 Msec=1500 True Az=171.63 Ze=-100.365 Az status=0009 Ze status=0009 10:53:31 Check angles 10:53:31 SkyScan query 10:53:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.47<-17298 Statuses=0008 0009 10:53:32 Msec=2250 True Az=176.01 Ze=-79.47 Az status=0008 Ze status=0009 10:53:32 Check angles 10:53:32 SkyScan query 10:53:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.5<-15900 Statuses=0008 0009 10:53:33 Msec=3000 True Az=176.01 Ze=-58.5 Az status=0008 Ze status=0009 10:53:33 Check angles 10:53:33 SkyScan query 10:53:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 10:53:33 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 10:53:33 Message to Master queued w/err=0: serial=219060 error=0 10:53:38 Received message from Master: op=Filter serial=219061 10:53:38 Color wheel filter change from 0 to 0 10:53:38 FLIGetFilterPos err=0 currentPosition=0 10:53:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:38 Filter is already there-color wheel unchanged 10:53:39 Received message from Master: op=Shutter serial=219062 10:53:39 Shutter LASER close 10:53:39 Received message from Camera: op=State serial=219064 10:53:39 GetSingleValue result=40 Value=cccccccc 10:53:39 SkyScan query 10:53:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:53:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:39 Parameters OK 10:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:39 Set A/D data flow result=40 10:53:39 Set A/D channel type result=40 10:53:39 Set A/D encoding result=40 10:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:39 Set channel filter=0.000000e+000 result=40 10:53:39 Config A/D Result=40 10:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:39 Get A/D filter: -9.255963e+061 result=40 10:53:39 Get A/D value=-858993460 result=40 10:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:39 Parameters OK 10:53:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:39 Set A/D data flow result=40 10:53:39 Set A/D channel type result=40 10:53:39 Set A/D encoding result=40 10:53:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:39 Set channel filter=0.000000e+000 result=40 10:53:39 Config A/D Result=40 10:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:39 Get A/D filter: -9.255963e+061 result=40 10:53:39 Get A/D value=-858993460 result=40 10:53:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:39 Aux= 10:53:39 Message to Camera, serial 219064 queued 10:54:16 Received message from Master: op=PointingHead serial=219077 10:54:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:54:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:54:17 Point started: ret=0 10:54:17 point_skyscan result=0 10:54:17 Check angles 10:54:17 SkyScan query 10:54:18 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.18<-13412 Statuses=0009 0009 10:54:18 Msec=0 True Az=152.565 Ze=-21.18 Az status=0009 Ze status=0009 10:54:18 Check angles 10:54:18 SkyScan query 10:54:19 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.21<-12014 Statuses=0009 0009 10:54:19 Msec=750 True Az=135.12 Ze=-0.21 Az status=0009 Ze status=0009 10:54:19 Check angles 10:54:19 SkyScan query 10:54:19 SkyScan query done: ret=0 az=117.15<-7810 ze=21.18<-10588 Statuses=0009 0009 10:54:19 Msec=1500 True Az=117.15 Ze=21.18 Az status=0009 Ze status=0009 10:54:20 Check angles 10:54:20 SkyScan query 10:54:20 SkyScan query done: ret=0 az=99.72<-6648 ze=42.105<-9193 Statuses=0009 0009 10:54:20 Msec=2250 True Az=99.72 Ze=42.105 Az status=0009 Ze status=0009 10:54:20 Check angles 10:54:20 SkyScan query 10:54:21 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 10:54:21 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 10:54:21 Check angles 10:54:21 SkyScan query 10:54:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:54:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:54:22 Message to Master queued w/err=0: serial=219077 error=0 10:54:27 Received message from Master: op=Filter serial=219078 10:54:27 Color wheel filter change from 0 to 0 10:54:27 FLIGetFilterPos err=0 currentPosition=0 10:54:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:27 Filter is already there-color wheel unchanged 10:54:27 Received message from Master: op=Shutter serial=219079 10:54:27 Shutter LASER close 10:54:27 Received message from Camera: op=State serial=219081 10:54:27 GetSingleValue result=40 Value=cccccccc 10:54:27 SkyScan query 10:54:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:54:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:28 Parameters OK 10:54:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:28 Set A/D data flow result=40 10:54:28 Set A/D channel type result=40 10:54:28 Set A/D encoding result=40 10:54:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:28 Set channel filter=0.000000e+000 result=40 10:54:28 Config A/D Result=40 10:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:28 Get A/D filter: -9.255963e+061 result=40 10:54:28 Get A/D value=-858993460 result=40 10:54:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:28 Parameters OK 10:54:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:28 Set A/D data flow result=40 10:54:28 Set A/D channel type result=40 10:54:28 Set A/D encoding result=40 10:54:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:28 Set channel filter=0.000000e+000 result=40 10:54:28 Config A/D Result=40 10:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:28 Get A/D filter: -9.255963e+061 result=40 10:54:28 Get A/D value=-858993460 result=40 10:54:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:28 Aux= 10:54:28 Message to Camera, serial 219081 queued 10:55:04 Received message from Master: op=PointingHead serial=219094 10:55:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:55:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:55:05 Point started: ret=0 10:55:05 point_skyscan result=0 10:55:05 Check angles 10:55:05 SkyScan query 10:55:06 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 10:55:06 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 10:55:06 Check angles 10:55:06 SkyScan query 10:55:07 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 10:55:07 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 10:55:07 Check angles 10:55:07 SkyScan query 10:55:08 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 10:55:08 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 10:55:08 Check angles 10:55:08 SkyScan query 10:55:08 SkyScan query done: ret=0 az=161.835<-10789 ze=38.505<-9433 Statuses=0009 0008 10:55:08 Msec=2250 True Az=161.835 Ze=38.505 Az status=0009 Ze status=0008 10:55:09 Check angles 10:55:09 SkyScan query 10:55:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:55:09 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:55:09 Check angles 10:55:09 SkyScan query 10:55:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:55:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:55:10 Message to Master queued w/err=0: serial=219094 error=0 10:55:15 Received message from Master: op=Filter serial=219095 10:55:15 Color wheel filter change from 0 to 0 10:55:15 FLIGetFilterPos err=0 currentPosition=0 10:55:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:15 Filter is already there-color wheel unchanged 10:55:15 Received message from Master: op=Shutter serial=219096 10:55:15 Shutter LASER close 10:55:15 Received message from Camera: op=State serial=219098 10:55:15 GetSingleValue result=40 Value=cccccccc 10:55:15 SkyScan query 10:55:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:55:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:16 Parameters OK 10:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:16 Set A/D data flow result=40 10:55:16 Set A/D channel type result=40 10:55:16 Set A/D encoding result=40 10:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:16 Set channel filter=0.000000e+000 result=40 10:55:16 Config A/D Result=40 10:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:16 Get A/D filter: -9.255963e+061 result=40 10:55:16 Get A/D value=-858993460 result=40 10:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:16 Parameters OK 10:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:16 Set A/D data flow result=40 10:55:16 Set A/D channel type result=40 10:55:16 Set A/D encoding result=40 10:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:16 Set channel filter=0.000000e+000 result=40 10:55:16 Config A/D Result=40 10:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:16 Get A/D filter: -9.255963e+061 result=40 10:55:16 Get A/D value=-858993460 result=40 10:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:16 Aux= 10:55:16 Message to Camera, serial 219098 queued [UTC 2018-12-17 10:55:52] 10:55:53 Received message from Master: op=PointingHead serial=219111 10:55:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:55:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:55:53 Point started: ret=0 10:55:53 point_skyscan result=0 10:55:54 Check angles 10:55:54 SkyScan query 10:55:54 SkyScan query done: ret=0 az=153.24<-10216 ze=9<-11400 Statuses=0009 0009 10:55:54 Msec=0 True Az=153.24 Ze=9 Az status=0009 Ze status=0009 10:55:54 Check angles 10:55:54 SkyScan query 10:55:55 SkyScan query done: ret=0 az=135.825<-9055 ze=-11.97<-12798 Statuses=0009 0009 10:55:55 Msec=750 True Az=135.825 Ze=-11.97 Az status=0009 Ze status=0009 10:55:55 Check angles 10:55:55 SkyScan query 10:55:56 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.315<-14221 Statuses=0009 0009 10:55:56 Msec=1500 True Az=117.795 Ze=-33.315 Az status=0009 Ze status=0009 10:55:56 Check angles 10:55:56 SkyScan query 10:55:57 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 10:55:57 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 10:55:57 Check angles 10:55:57 SkyScan query 10:55:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:55:57 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:55:57 Check angles 10:55:57 SkyScan query 10:55:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:55:58 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:55:58 Message to Master queued w/err=0: serial=219111 error=0 10:56:03 Received message from Master: op=Filter serial=219112 10:56:03 Color wheel filter change from 0 to 0 10:56:03 FLIGetFilterPos err=0 currentPosition=0 10:56:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:03 Filter is already there-color wheel unchanged 10:56:03 Received message from Master: op=Shutter serial=219113 10:56:03 Shutter LASER close 10:56:03 Received message from Camera: op=State serial=219115 10:56:03 GetSingleValue result=40 Value=cccccccc 10:56:03 SkyScan query 10:56:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:56:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:04 Parameters OK 10:56:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:04 Set A/D data flow result=40 10:56:04 Set A/D channel type result=40 10:56:04 Set A/D encoding result=40 10:56:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:04 Set channel filter=0.000000e+000 result=40 10:56:04 Config A/D Result=40 10:56:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:04 Get A/D filter: -9.255963e+061 result=40 10:56:04 Get A/D value=-858993460 result=40 10:56:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:04 Parameters OK 10:56:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:04 Set A/D data flow result=40 10:56:04 Set A/D channel type result=40 10:56:04 Set A/D encoding result=40 10:56:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:04 Set channel filter=0.000000e+000 result=40 10:56:04 Config A/D Result=40 10:56:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:04 Get A/D filter: -9.255963e+061 result=40 10:56:04 Get A/D value=-858993460 result=40 10:56:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:04 Aux= 10:56:04 Message to Camera, serial 219115 queued 10:56:41 Received message from Master: op=PointingHead serial=219128 10:56:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:56:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:56:41 Point started: ret=0 10:56:41 point_skyscan result=0 10:56:42 Check angles 10:56:42 SkyScan query 10:56:42 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.42<-17428 Statuses=0009 0009 10:56:42 Msec=0 True Az=109.215 Ze=-81.42 Az status=0009 Ze status=0009 10:56:42 Check angles 10:56:42 SkyScan query 10:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 10:56:43 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 10:56:43 Check angles 10:56:43 SkyScan query 10:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 10:56:44 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 10:56:44 Check angles 10:56:44 SkyScan query 10:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 10:56:45 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 10:56:45 Check angles 10:56:45 SkyScan query 10:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 10:56:45 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 10:56:45 Check angles 10:56:45 SkyScan query 10:56:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:56:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:56:46 Message to Master queued w/err=0: serial=219128 error=0 10:56:51 Received message from Master: op=Filter serial=219129 10:56:51 Color wheel filter change from 0 to 0 10:56:51 FLIGetFilterPos err=0 currentPosition=0 10:56:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:51 Filter is already there-color wheel unchanged 10:56:51 Received message from Master: op=Shutter serial=219130 10:56:51 Shutter LASER open 10:56:51 Received message from Camera: op=State serial=219132 10:56:51 GetSingleValue result=40 Value=cccccccc 10:56:51 SkyScan query 10:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:56:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:52 Parameters OK 10:56:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:52 Set A/D data flow result=40 10:56:52 Set A/D channel type result=40 10:56:52 Set A/D encoding result=40 10:56:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:52 Set channel filter=0.000000e+000 result=40 10:56:52 Config A/D Result=40 10:56:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:52 Get A/D filter: -9.255963e+061 result=40 10:56:52 Get A/D value=-858993460 result=40 10:56:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:52 Parameters OK 10:56:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:52 Set A/D data flow result=40 10:56:52 Set A/D channel type result=40 10:56:52 Set A/D encoding result=40 10:56:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:52 Set channel filter=0.000000e+000 result=40 10:56:52 Config A/D Result=40 10:56:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:52 Get A/D filter: -9.255963e+061 result=40 10:56:52 Get A/D value=-858993460 result=40 10:56:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:52 Aux= 10:56:52 Message to Camera, serial 219132 queued 10:57:00 Received message from Master: op=Shutter serial=219142 10:57:00 Shutter LASER close 10:57:01 Received message from Master: op=PointingHead serial=219146 10:57:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:57:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:57:01 Point started: ret=0 10:57:01 point_skyscan result=0 10:57:02 Check angles 10:57:02 SkyScan query 10:57:03 SkyScan query done: ret=0 az=90.12<-6008 ze=157.515<-1499 Statuses=0009 0009 10:57:03 Msec=0 True Az=90.12 Ze=157.515 Az status=0009 Ze status=0009 10:57:03 Check angles 10:57:03 SkyScan query 10:57:03 SkyScan query done: ret=0 az=72.63<-4842 ze=136.515<-2899 Statuses=0009 0009 10:57:03 Msec=750 True Az=72.63 Ze=136.515 Az status=0009 Ze status=0009 10:57:03 Check angles 10:57:03 SkyScan query 10:57:04 SkyScan query done: ret=0 az=55.245<-3683 ze=115.62<-4292 Statuses=0009 0009 10:57:04 Msec=1500 True Az=55.245 Ze=115.62 Az status=0009 Ze status=0009 10:57:04 Check angles 10:57:04 SkyScan query 10:57:05 SkyScan query done: ret=0 az=40.875<-2725 ze=94.605<-5693 Statuses=0009 0009 10:57:05 Msec=2250 True Az=40.875 Ze=94.605 Az status=0009 Ze status=0009 10:57:05 Check angles 10:57:05 SkyScan query 10:57:06 SkyScan query done: ret=0 az=40.98<-2732 ze=73.71<-7086 Statuses=0008 0009 10:57:06 Msec=3000 True Az=40.98 Ze=73.71 Az status=0008 Ze status=0009 10:57:06 Check angles 10:57:06 SkyScan query 10:57:06 SkyScan query done: ret=0 az=40.98<-2732 ze=52.995<-8467 Statuses=0008 0009 10:57:06 Msec=3750 True Az=40.98 Ze=52.995 Az status=0008 Ze status=0009 10:57:06 Check angles 10:57:06 SkyScan query 10:57:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:57:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:57:07 Message to Master queued w/err=0: serial=219146 error=0 10:57:12 Received message from Master: op=Filter serial=219147 10:57:12 Color wheel filter change from 0 to 0 10:57:12 FLIGetFilterPos err=0 currentPosition=0 10:57:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:12 Filter is already there-color wheel unchanged 10:57:12 Received message from Master: op=Shutter serial=219148 10:57:12 Shutter LASER close 10:57:12 Received message from Camera: op=State serial=219150 10:57:12 GetSingleValue result=40 Value=cccccccc 10:57:12 SkyScan query 10:57:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:57:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:13 Parameters OK 10:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:13 Set A/D data flow result=40 10:57:13 Set A/D channel type result=40 10:57:13 Set A/D encoding result=40 10:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:13 Set channel filter=0.000000e+000 result=40 10:57:13 Config A/D Result=40 10:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:13 Get A/D filter: -9.255963e+061 result=40 10:57:13 Get A/D value=-858993460 result=40 10:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:13 Parameters OK 10:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:13 Set A/D data flow result=40 10:57:13 Set A/D channel type result=40 10:57:13 Set A/D encoding result=40 10:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:13 Set channel filter=0.000000e+000 result=40 10:57:13 Config A/D Result=40 10:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:13 Get A/D filter: -9.255963e+061 result=40 10:57:13 Get A/D value=-858993460 result=40 10:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:13 Aux= 10:57:13 Message to Camera, serial 219150 queued 10:57:50 Received message from Master: op=PointingHead serial=219163 10:57:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:57:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:57:50 Point started: ret=0 10:57:50 point_skyscan result=0 10:57:51 Check angles 10:57:51 SkyScan query 10:57:51 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 10:57:51 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 10:57:52 Check angles 10:57:52 SkyScan query 10:57:52 SkyScan query done: ret=0 az=81.69<-5446 ze=66.495<-7567 Statuses=0009 0008 10:57:52 Msec=750 True Az=81.69 Ze=66.495 Az status=0009 Ze status=0008 10:57:52 Check angles 10:57:52 SkyScan query 10:57:53 SkyScan query done: ret=0 az=99.615<-6641 ze=66.495<-7567 Statuses=0009 0008 10:57:53 Msec=1500 True Az=99.615 Ze=66.495 Az status=0009 Ze status=0008 10:57:53 Check angles 10:57:53 SkyScan query 10:57:54 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 10:57:54 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 10:57:54 Check angles 10:57:54 SkyScan query 10:57:54 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 10:57:54 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 10:57:55 Check angles 10:57:55 SkyScan query 10:57:55 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 10:57:55 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 10:57:55 Check angles 10:57:55 SkyScan query 10:57:56 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 10:57:56 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 10:57:56 Message to Master queued w/err=0: serial=219163 error=0 10:58:01 Received message from Master: op=Filter serial=219164 10:58:01 Color wheel filter change from 0 to 0 10:58:01 FLIGetFilterPos err=0 currentPosition=0 10:58:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:01 Filter is already there-color wheel unchanged 10:58:01 Received message from Master: op=Shutter serial=219165 10:58:01 Shutter LASER close 10:58:01 Received message from Camera: op=State serial=219167 10:58:01 GetSingleValue result=40 Value=cccccccc 10:58:01 SkyScan query 10:58:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:58:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:02 Parameters OK 10:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:02 Set A/D data flow result=40 10:58:02 Set A/D channel type result=40 10:58:02 Set A/D encoding result=40 10:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:02 Set channel filter=0.000000e+000 result=40 10:58:02 Config A/D Result=40 10:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:02 Get A/D filter: -9.255963e+061 result=40 10:58:02 Get A/D value=-858993460 result=40 10:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:02 Parameters OK 10:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:02 Set A/D data flow result=40 10:58:02 Set A/D channel type result=40 10:58:02 Set A/D encoding result=40 10:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:02 Set channel filter=0.000000e+000 result=40 10:58:02 Config A/D Result=40 10:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:02 Get A/D filter: -9.255963e+061 result=40 10:58:02 Get A/D value=-858993460 result=40 10:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:02 Aux= 10:58:02 Message to Camera, serial 219167 queued 10:58:39 Received message from Master: op=PointingHead serial=219180 10:58:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:58:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:58:39 Point started: ret=0 10:58:39 point_skyscan result=0 10:58:40 Check angles 10:58:40 SkyScan query 10:58:40 SkyScan query done: ret=0 az=134.85<-8990 ze=36.54<-9564 Statuses=0009 0009 10:58:40 Msec=0 True Az=134.85 Ze=36.54 Az status=0009 Ze status=0009 10:58:40 Check angles 10:58:40 SkyScan query 10:58:41 SkyScan query done: ret=0 az=117.345<-7823 ze=15.585<-10961 Statuses=0009 0009 10:58:41 Msec=750 True Az=117.345 Ze=15.585 Az status=0009 Ze status=0009 10:58:41 Check angles 10:58:41 SkyScan query 10:58:42 SkyScan query done: ret=0 az=99.99<-6666 ze=-5.385<-12359 Statuses=0009 0009 10:58:42 Msec=1500 True Az=99.99 Ze=-5.385 Az status=0009 Ze status=0009 10:58:42 Check angles 10:58:42 SkyScan query 10:58:43 SkyScan query done: ret=0 az=82.35<-5490 ze=-26.355<-13757 Statuses=0009 0009 10:58:43 Msec=2250 True Az=82.35 Ze=-26.355 Az status=0009 Ze status=0009 10:58:43 Check angles 10:58:43 SkyScan query 10:58:43 SkyScan query done: ret=0 az=65.025<-4335 ze=-38.58<-14572 Statuses=0009 0008 10:58:43 Msec=3000 True Az=65.025 Ze=-38.58 Az status=0009 Ze status=0008 10:58:43 Check angles 10:58:43 SkyScan query 10:58:44 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.52<-14568 Statuses=0009 0008 10:58:44 Msec=3750 True Az=47.415 Ze=-38.52 Az status=0009 Ze status=0008 10:58:44 Check angles 10:58:44 SkyScan query 10:58:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:58:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:58:45 Message to Master queued w/err=0: serial=219180 error=0 10:58:50 Received message from Master: op=Filter serial=219181 10:58:50 Color wheel filter change from 0 to 0 10:58:50 FLIGetFilterPos err=0 currentPosition=0 10:58:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:50 Filter is already there-color wheel unchanged 10:58:50 Received message from Master: op=Shutter serial=219182 10:58:50 Shutter LASER close 10:58:50 Received message from Camera: op=State serial=219184 10:58:50 GetSingleValue result=40 Value=cccccccc 10:58:50 SkyScan query 10:58:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:58:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:51 Parameters OK 10:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:51 Set A/D data flow result=40 10:58:51 Set A/D channel type result=40 10:58:51 Set A/D encoding result=40 10:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:51 Set channel filter=0.000000e+000 result=40 10:58:51 Config A/D Result=40 10:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:51 Get A/D filter: -9.255963e+061 result=40 10:58:51 Get A/D value=-858993460 result=40 10:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:51 Parameters OK 10:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:51 Set A/D data flow result=40 10:58:51 Set A/D channel type result=40 10:58:51 Set A/D encoding result=40 10:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:51 Set channel filter=0.000000e+000 result=40 10:58:51 Config A/D Result=40 10:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:51 Get A/D filter: -9.255963e+061 result=40 10:58:51 Get A/D value=-858993460 result=40 10:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:51 Aux= 10:58:51 Message to Camera, serial 219184 queued 10:59:27 Received message from Master: op=PointingHead serial=219197 10:59:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:59:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:59:28 Point started: ret=0 10:59:28 point_skyscan result=0 10:59:29 Check angles 10:59:29 SkyScan query 10:59:29 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.745<-16583 Statuses=0009 0009 10:59:29 Msec=0 True Az=64.425 Ze=-68.745 Az status=0009 Ze status=0009 10:59:29 Check angles 10:59:29 SkyScan query 10:59:30 SkyScan query done: ret=0 az=81.81<-5454 ze=-89.7<-17980 Statuses=0009 0009 10:59:30 Msec=750 True Az=81.81 Ze=-89.7 Az status=0009 Ze status=0009 10:59:30 Check angles 10:59:30 SkyScan query 10:59:31 SkyScan query done: ret=0 az=99.765<-6651 ze=-111.06<-19404 Statuses=0009 0009 10:59:31 Msec=1500 True Az=99.765 Ze=-111.06 Az status=0009 Ze status=0009 10:59:31 Check angles 10:59:31 SkyScan query 10:59:31 SkyScan query done: ret=0 az=117.285<-7819 ze=-132<-20800 Statuses=0009 0009 10:59:31 Msec=2250 True Az=117.285 Ze=-132 Az status=0009 Ze status=0009 10:59:32 Check angles 10:59:32 SkyScan query 10:59:32 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 10:59:32 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 10:59:32 Check angles 10:59:32 SkyScan query 10:59:33 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:59:33 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:59:33 Message to Master queued w/err=0: serial=219197 error=0 10:59:38 Received message from Master: op=Filter serial=219198 10:59:38 Color wheel filter change from 0 to 0 10:59:38 FLIGetFilterPos err=0 currentPosition=0 10:59:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:38 Filter is already there-color wheel unchanged 10:59:38 Received message from Master: op=Shutter serial=219199 10:59:38 Shutter LASER close 10:59:38 Received message from Camera: op=State serial=219201 10:59:38 GetSingleValue result=40 Value=cccccccc 10:59:38 SkyScan query 10:59:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:59:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:39 Parameters OK 10:59:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:39 Set A/D data flow result=40 10:59:39 Set A/D channel type result=40 10:59:39 Set A/D encoding result=40 10:59:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:39 Set channel filter=0.000000e+000 result=40 10:59:39 Config A/D Result=40 10:59:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:39 Get A/D filter: -9.255963e+061 result=40 10:59:39 Get A/D value=-858993460 result=40 10:59:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:39 Parameters OK 10:59:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:39 Set A/D data flow result=40 10:59:39 Set A/D channel type result=40 10:59:39 Set A/D encoding result=40 10:59:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:39 Set channel filter=0.000000e+000 result=40 10:59:39 Config A/D Result=40 10:59:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:39 Get A/D filter: -9.255963e+061 result=40 10:59:39 Get A/D value=-858993460 result=40 10:59:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:39 Aux= 10:59:39 Message to Camera, serial 219201 queued 11:00:16 Received message from Master: op=PointingHead serial=219214 11:00:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:00:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:00:16 Point started: ret=0 11:00:16 point_skyscan result=0 11:00:17 Check angles 11:00:17 SkyScan query 11:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0008 0009 11:00:17 Msec=0 True Az=112.995 Ze=-171.495 Az status=0008 Ze status=0009 11:00:17 Check angles 11:00:17 SkyScan query 11:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:00:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:00:18 Message to Master queued w/err=0: serial=219214 error=0 11:00:23 Received message from Master: op=Filter serial=219215 11:00:23 Color wheel filter change from 0 to 0 11:00:23 FLIGetFilterPos err=0 currentPosition=0 11:00:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:23 Filter is already there-color wheel unchanged 11:00:23 Received message from Master: op=Shutter serial=219216 11:00:23 Shutter LASER open 11:00:23 Received message from Camera: op=State serial=219218 11:00:23 GetSingleValue result=40 Value=cccccccc 11:00:23 SkyScan query 11:00:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:00:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:24 Parameters OK 11:00:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:24 Set A/D data flow result=40 11:00:24 Set A/D channel type result=40 11:00:24 Set A/D encoding result=40 11:00:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:24 Set channel filter=0.000000e+000 result=40 11:00:24 Config A/D Result=40 11:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:24 Get A/D filter: -9.255963e+061 result=40 11:00:24 Get A/D value=-858993460 result=40 11:00:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:24 Parameters OK 11:00:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:24 Set A/D data flow result=40 11:00:24 Set A/D channel type result=40 11:00:24 Set A/D encoding result=40 11:00:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:24 Set channel filter=0.000000e+000 result=40 11:00:24 Config A/D Result=40 11:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:24 Get A/D filter: -9.255963e+061 result=40 11:00:24 Get A/D value=-858993460 result=40 11:00:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:24 Aux= 11:00:24 Message to Camera, serial 219218 queued 11:00:32 Received message from Master: op=Shutter serial=219228 11:00:32 Shutter LASER close 11:00:33 Received message from Master: op=PointingHead serial=219232 11:00:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:00:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:00:33 Point started: ret=0 11:00:33 point_skyscan result=0 11:00:34 Check angles 11:00:34 SkyScan query 11:00:35 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.725<-21515 Statuses=0009 0009 11:00:35 Msec=0 True Az=136.395 Ze=-142.725 Az status=0009 Ze status=0009 11:00:35 Check angles 11:00:35 SkyScan query 11:00:35 SkyScan query done: ret=0 az=154.335<-10289 ze=-121.38<-20092 Statuses=0009 0009 11:00:35 Msec=750 True Az=154.335 Ze=-121.38 Az status=0009 Ze status=0009 11:00:36 Check angles 11:00:36 SkyScan query 11:00:36 SkyScan query done: ret=0 az=171.765<-11451 ze=-100.305<-18687 Statuses=0009 0009 11:00:36 Msec=1500 True Az=171.765 Ze=-100.305 Az status=0009 Ze status=0009 11:00:36 Check angles 11:00:36 SkyScan query 11:00:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.41<-17294 Statuses=0008 0009 11:00:37 Msec=2250 True Az=176.01 Ze=-79.41 Az status=0008 Ze status=0009 11:00:37 Check angles 11:00:37 SkyScan query 11:00:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 11:00:38 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 11:00:38 Check angles 11:00:38 SkyScan query 11:00:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 11:00:38 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 11:00:38 Message to Master queued w/err=0: serial=219232 error=0 11:00:43 Received message from Master: op=Filter serial=219233 11:00:43 Color wheel filter change from 0 to 0 11:00:43 FLIGetFilterPos err=0 currentPosition=0 11:00:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:43 Filter is already there-color wheel unchanged 11:00:44 Received message from Master: op=Shutter serial=219234 11:00:44 Shutter LASER close 11:00:44 Received message from Camera: op=State serial=219236 11:00:44 GetSingleValue result=40 Value=cccccccc 11:00:44 SkyScan query 11:00:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:00:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:44 Parameters OK 11:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:44 Set A/D data flow result=40 11:00:44 Set A/D channel type result=40 11:00:44 Set A/D encoding result=40 11:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:44 Set channel filter=0.000000e+000 result=40 11:00:44 Config A/D Result=40 11:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:44 Get A/D filter: -9.255963e+061 result=40 11:00:44 Get A/D value=-858993460 result=40 11:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:44 Parameters OK 11:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:44 Set A/D data flow result=40 11:00:44 Set A/D channel type result=40 11:00:44 Set A/D encoding result=40 11:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:44 Set channel filter=0.000000e+000 result=40 11:00:44 Config A/D Result=40 11:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:44 Get A/D filter: -9.255963e+061 result=40 11:00:44 Get A/D value=-858993460 result=40 11:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:44 Aux= 11:00:44 Message to Camera, serial 219236 queued 11:01:21 Received message from Master: op=PointingHead serial=219249 11:01:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:01:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:01:22 Point started: ret=0 11:01:22 point_skyscan result=0 11:01:22 Check angles 11:01:22 SkyScan query 11:01:23 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.225<-13415 Statuses=0009 0009 11:01:23 Msec=0 True Az=152.655 Ze=-21.225 Az status=0009 Ze status=0009 11:01:23 Check angles 11:01:23 SkyScan query 11:01:24 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.255<-12017 Statuses=0009 0009 11:01:24 Msec=750 True Az=135.12 Ze=-0.255 Az status=0009 Ze status=0009 11:01:24 Check angles 11:01:24 SkyScan query 11:01:24 SkyScan query done: ret=0 az=117.555<-7837 ze=20.655<-10623 Statuses=0009 0009 11:01:24 Msec=1500 True Az=117.555 Ze=20.655 Az status=0009 Ze status=0009 11:01:25 Check angles 11:01:25 SkyScan query 11:01:25 SkyScan query done: ret=0 az=100.305<-6687 ze=41.685<-9221 Statuses=0009 0009 11:01:25 Msec=2250 True Az=100.305 Ze=41.685 Az status=0009 Ze status=0009 11:01:25 Check angles 11:01:25 SkyScan query 11:01:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 11:01:26 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 11:01:26 Check angles 11:01:26 SkyScan query 11:01:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:01:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:01:27 Message to Master queued w/err=0: serial=219249 error=0 11:01:32 Received message from Master: op=Filter serial=219250 11:01:32 Color wheel filter change from 0 to 0 11:01:32 FLIGetFilterPos err=0 currentPosition=0 11:01:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:32 Filter is already there-color wheel unchanged 11:01:32 Received message from Master: op=Shutter serial=219251 11:01:32 Shutter LASER close 11:01:32 Received message from Camera: op=State serial=219253 11:01:32 GetSingleValue result=40 Value=cccccccc 11:01:32 SkyScan query 11:01:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:01:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:32 Parameters OK 11:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:32 Set A/D data flow result=40 11:01:32 Set A/D channel type result=40 11:01:32 Set A/D encoding result=40 11:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:32 Set channel filter=0.000000e+000 result=40 11:01:32 Config A/D Result=40 11:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:32 Get A/D filter: -9.255963e+061 result=40 11:01:32 Get A/D value=-858993460 result=40 11:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:32 Parameters OK 11:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:32 Set A/D data flow result=40 11:01:32 Set A/D channel type result=40 11:01:32 Set A/D encoding result=40 11:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:32 Set channel filter=0.000000e+000 result=40 11:01:32 Config A/D Result=40 11:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:32 Get A/D filter: -9.255963e+061 result=40 11:01:32 Get A/D value=-858993460 result=40 11:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:32 Aux= 11:01:32 Message to Camera, serial 219253 queued 11:02:09 Received message from Master: op=PointingHead serial=219266 11:02:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:02:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:02:10 Point started: ret=0 11:02:10 point_skyscan result=0 11:02:10 Check angles 11:02:10 SkyScan query 11:02:11 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 11:02:11 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 11:02:11 Check angles 11:02:11 SkyScan query 11:02:12 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 11:02:12 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 11:02:12 Check angles 11:02:12 SkyScan query 11:02:12 SkyScan query done: ret=0 az=143.775<-9585 ze=38.505<-9433 Statuses=0009 0008 11:02:12 Msec=1500 True Az=143.775 Ze=38.505 Az status=0009 Ze status=0008 11:02:13 Check angles 11:02:13 SkyScan query 11:02:13 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 11:02:13 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 11:02:13 Check angles 11:02:13 SkyScan query 11:02:14 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:02:14 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:02:14 Check angles 11:02:14 SkyScan query 11:02:15 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:02:15 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:02:15 Message to Master queued w/err=0: serial=219266 error=0 11:02:20 Received message from Master: op=Filter serial=219267 11:02:20 Color wheel filter change from 0 to 0 11:02:20 FLIGetFilterPos err=0 currentPosition=0 11:02:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:20 Filter is already there-color wheel unchanged 11:02:20 Received message from Master: op=Shutter serial=219268 11:02:20 Shutter LASER close 11:02:20 Received message from Camera: op=State serial=219270 11:02:20 GetSingleValue result=40 Value=cccccccc 11:02:20 SkyScan query 11:02:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:02:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:20 Parameters OK 11:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:20 Set A/D data flow result=40 11:02:20 Set A/D channel type result=40 11:02:20 Set A/D encoding result=40 11:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:20 Set channel filter=0.000000e+000 result=40 11:02:20 Config A/D Result=40 11:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:20 Get A/D filter: -9.255963e+061 result=40 11:02:20 Get A/D value=-858993460 result=40 11:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:20 Parameters OK 11:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:20 Set A/D data flow result=40 11:02:20 Set A/D channel type result=40 11:02:20 Set A/D encoding result=40 11:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:20 Set channel filter=0.000000e+000 result=40 11:02:20 Config A/D Result=40 11:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:20 Get A/D filter: -9.255963e+061 result=40 11:02:20 Get A/D value=-858993460 result=40 11:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:20 Aux= 11:02:20 Message to Camera, serial 219270 queued 11:02:57 Received message from Master: op=PointingHead serial=219283 11:02:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:02:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:02:58 Point started: ret=0 11:02:58 point_skyscan result=0 11:02:58 Check angles 11:02:58 SkyScan query 11:02:59 SkyScan query done: ret=0 az=152.745<-10183 ze=8.355<-11443 Statuses=0009 0009 11:02:59 Msec=0 True Az=152.745 Ze=8.355 Az status=0009 Ze status=0009 11:02:59 Check angles 11:02:59 SkyScan query 11:03:00 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.57<-12838 Statuses=0009 0009 11:03:00 Msec=750 True Az=135.345 Ze=-12.57 Az status=0009 Ze status=0009 11:03:00 Check angles 11:03:00 SkyScan query 11:03:00 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.525<-14235 Statuses=0009 0009 11:03:00 Msec=1500 True Az=117.795 Ze=-33.525 Az status=0009 Ze status=0009 11:03:01 Check angles 11:03:01 SkyScan query 11:03:01 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 11:03:01 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 11:03:01 Check angles 11:03:01 SkyScan query 11:03:02 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:03:02 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:03:02 Check angles 11:03:02 SkyScan query 11:03:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:03:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:03:03 Message to Master queued w/err=0: serial=219283 error=0 11:03:08 Received message from Master: op=Filter serial=219284 11:03:08 Color wheel filter change from 0 to 0 11:03:08 FLIGetFilterPos err=0 currentPosition=0 11:03:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:08 Filter is already there-color wheel unchanged 11:03:08 Received message from Master: op=Shutter serial=219285 11:03:08 Shutter LASER close 11:03:08 Received message from Camera: op=State serial=219287 11:03:08 GetSingleValue result=40 Value=cccccccc 11:03:08 SkyScan query 11:03:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:03:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:09 Parameters OK 11:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:09 Set A/D data flow result=40 11:03:09 Set A/D channel type result=40 11:03:09 Set A/D encoding result=40 11:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:09 Set channel filter=0.000000e+000 result=40 11:03:09 Config A/D Result=40 11:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:09 Get A/D filter: -9.255963e+061 result=40 11:03:09 Get A/D value=-858993460 result=40 11:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:09 Parameters OK 11:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:09 Set A/D data flow result=40 11:03:09 Set A/D channel type result=40 11:03:09 Set A/D encoding result=40 11:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:09 Set channel filter=0.000000e+000 result=40 11:03:09 Config A/D Result=40 11:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:09 Get A/D filter: -9.255963e+061 result=40 11:03:09 Get A/D value=-858993460 result=40 11:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:09 Aux= 11:03:09 Message to Camera, serial 219287 queued 11:03:45 Received message from Master: op=PointingHead serial=219300 11:03:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:03:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:03:46 Point started: ret=0 11:03:46 point_skyscan result=0 11:03:46 Check angles 11:03:46 SkyScan query 11:03:47 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.465<-17431 Statuses=0009 0009 11:03:47 Msec=0 True Az=109.155 Ze=-81.465 Az status=0009 Ze status=0009 11:03:47 Check angles 11:03:47 SkyScan query 11:03:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 11:03:48 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 11:03:48 Check angles 11:03:48 SkyScan query 11:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.375<-20225 Statuses=0008 0009 11:03:49 Msec=1500 True Az=112.995 Ze=-123.375 Az status=0008 Ze status=0009 11:03:49 Check angles 11:03:49 SkyScan query 11:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 11:03:49 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 11:03:49 Check angles 11:03:49 SkyScan query 11:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 11:03:50 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 11:03:50 Check angles 11:03:50 SkyScan query 11:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:03:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:03:51 Message to Master queued w/err=0: serial=219300 error=0 11:03:56 Received message from Master: op=Filter serial=219301 11:03:56 Color wheel filter change from 0 to 0 11:03:56 FLIGetFilterPos err=0 currentPosition=0 11:03:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:56 Filter is already there-color wheel unchanged 11:03:56 Received message from Master: op=Shutter serial=219302 11:03:56 Shutter LASER open 11:03:56 Received message from Camera: op=State serial=219304 11:03:56 GetSingleValue result=40 Value=cccccccc 11:03:56 SkyScan query 11:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:03:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:57 Parameters OK 11:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:57 Set A/D data flow result=40 11:03:57 Set A/D channel type result=40 11:03:57 Set A/D encoding result=40 11:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:57 Set channel filter=0.000000e+000 result=40 11:03:57 Config A/D Result=40 11:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:57 Get A/D filter: -9.255963e+061 result=40 11:03:57 Get A/D value=-858993460 result=40 11:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:57 Parameters OK 11:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:57 Set A/D data flow result=40 11:03:57 Set A/D channel type result=40 11:03:57 Set A/D encoding result=40 11:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:57 Set channel filter=0.000000e+000 result=40 11:03:57 Config A/D Result=40 11:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:57 Get A/D filter: -9.255963e+061 result=40 11:03:57 Get A/D value=-858993460 result=40 11:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:57 Aux= 11:03:57 Message to Camera, serial 219304 queued 11:04:04 Received message from Master: op=Shutter serial=219313 11:04:04 Shutter LASER close 11:04:05 Received message from Master: op=PointingHead serial=219317 11:04:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:04:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:04:05 Point started: ret=0 11:04:05 point_skyscan result=0 11:04:06 Check angles 11:04:06 SkyScan query 11:04:06 SkyScan query done: ret=0 az=89.79<-5986 ze=157.44<-1504 Statuses=0009 0009 11:04:06 Msec=0 True Az=89.79 Ze=157.44 Az status=0009 Ze status=0009 11:04:06 Check angles 11:04:06 SkyScan query 11:04:07 SkyScan query done: ret=0 az=72.255<-4817 ze=136.365<-2909 Statuses=0009 0009 11:04:07 Msec=750 True Az=72.255 Ze=136.365 Az status=0009 Ze status=0009 11:04:07 Check angles 11:04:07 SkyScan query 11:04:08 SkyScan query done: ret=0 az=54.615<-3641 ze=115.095<-4327 Statuses=0009 0009 11:04:08 Msec=1500 True Az=54.615 Ze=115.095 Az status=0009 Ze status=0009 11:04:08 Check angles 11:04:08 SkyScan query 11:04:09 SkyScan query done: ret=0 az=41.025<-2735 ze=94.14<-5724 Statuses=0009 0009 11:04:09 Msec=2250 True Az=41.025 Ze=94.14 Az status=0009 Ze status=0009 11:04:09 Check angles 11:04:09 SkyScan query 11:04:09 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 11:04:09 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 11:04:10 Check angles 11:04:10 SkyScan query 11:04:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 11:04:10 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 11:04:10 Check angles 11:04:10 SkyScan query 11:04:11 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 11:04:11 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 11:04:11 Message to Master queued w/err=0: serial=219317 error=0 11:04:16 Received message from Master: op=Filter serial=219318 11:04:16 Color wheel filter change from 0 to 0 11:04:16 FLIGetFilterPos err=0 currentPosition=0 11:04:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:16 Filter is already there-color wheel unchanged 11:04:16 Received message from Master: op=Shutter serial=219319 11:04:16 Shutter LASER close 11:04:16 Received message from Camera: op=State serial=219321 11:04:16 GetSingleValue result=40 Value=cccccccc 11:04:16 SkyScan query 11:04:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:04:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:17 Parameters OK 11:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:17 Set A/D data flow result=40 11:04:17 Set A/D channel type result=40 11:04:17 Set A/D encoding result=40 11:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:17 Set channel filter=0.000000e+000 result=40 11:04:17 Config A/D Result=40 11:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:17 Get A/D filter: -9.255963e+061 result=40 11:04:17 Get A/D value=-858993460 result=40 11:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:17 Parameters OK 11:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:17 Set A/D data flow result=40 11:04:17 Set A/D channel type result=40 11:04:17 Set A/D encoding result=40 11:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:17 Set channel filter=0.000000e+000 result=40 11:04:17 Config A/D Result=40 11:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:17 Get A/D filter: -9.255963e+061 result=40 11:04:17 Get A/D value=-858993460 result=40 11:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:17 Aux= 11:04:17 Message to Camera, serial 219321 queued 11:04:54 Received message from Master: op=PointingHead serial=219334 11:04:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:04:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:04:54 Point started: ret=0 11:04:54 point_skyscan result=0 11:04:55 Check angles 11:04:55 SkyScan query 11:04:55 SkyScan query done: ret=0 az=64.095<-4273 ze=66.54<-7564 Statuses=0009 0008 11:04:55 Msec=0 True Az=64.095 Ze=66.54 Az status=0009 Ze status=0008 11:04:55 Check angles 11:04:55 SkyScan query 11:04:56 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 11:04:56 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 11:04:56 Check angles 11:04:56 SkyScan query 11:04:57 SkyScan query done: ret=0 az=99.42<-6628 ze=66.495<-7567 Statuses=0009 0008 11:04:57 Msec=1500 True Az=99.42 Ze=66.495 Az status=0009 Ze status=0008 11:04:57 Check angles 11:04:57 SkyScan query 11:04:58 SkyScan query done: ret=0 az=117.3<-7820 ze=66.495<-7567 Statuses=0009 0008 11:04:58 Msec=2250 True Az=117.3 Ze=66.495 Az status=0009 Ze status=0008 11:04:58 Check angles 11:04:58 SkyScan query 11:04:58 SkyScan query done: ret=0 az=134.76<-8984 ze=66.495<-7567 Statuses=0009 0008 11:04:58 Msec=3000 True Az=134.76 Ze=66.495 Az status=0009 Ze status=0008 11:04:58 Check angles 11:04:58 SkyScan query 11:04:59 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 11:04:59 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 11:04:59 Check angles 11:04:59 SkyScan query 11:05:00 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:05:00 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:05:00 Message to Master queued w/err=0: serial=219334 error=0 11:05:05 Received message from Master: op=Filter serial=219335 11:05:05 Color wheel filter change from 0 to 0 11:05:05 FLIGetFilterPos err=0 currentPosition=0 11:05:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:05 Filter is already there-color wheel unchanged 11:05:05 Received message from Master: op=Shutter serial=219336 11:05:05 Shutter LASER close 11:05:05 Received message from Camera: op=State serial=219338 11:05:05 GetSingleValue result=40 Value=cccccccc 11:05:05 SkyScan query 11:05:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:05:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:06 Parameters OK 11:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:06 Set A/D data flow result=40 11:05:06 Set A/D channel type result=40 11:05:06 Set A/D encoding result=40 11:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:06 Set channel filter=0.000000e+000 result=40 11:05:06 Config A/D Result=40 11:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:06 Get A/D filter: -9.255963e+061 result=40 11:05:06 Get A/D value=-858993460 result=40 11:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:06 Parameters OK 11:05:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:06 Set A/D data flow result=40 11:05:06 Set A/D channel type result=40 11:05:06 Set A/D encoding result=40 11:05:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:06 Set channel filter=0.000000e+000 result=40 11:05:06 Config A/D Result=40 11:05:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:06 Get A/D filter: -9.255963e+061 result=40 11:05:06 Get A/D value=-858993460 result=40 [UTC 2018-12-17 11:05:06] 11:05:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:06 Aux= 11:05:06 Message to Camera, serial 219338 queued 11:05:42 Received message from Master: op=PointingHead serial=219351 11:05:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:05:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:05:43 Point started: ret=0 11:05:43 point_skyscan result=0 11:05:44 Check angles 11:05:44 SkyScan query 11:05:44 SkyScan query done: ret=0 az=135.09<-9006 ze=36.765<-9549 Statuses=0009 0009 11:05:44 Msec=0 True Az=135.09 Ze=36.765 Az status=0009 Ze status=0009 11:05:44 Check angles 11:05:44 SkyScan query 11:05:45 SkyScan query done: ret=0 az=117.57<-7838 ze=15.825<-10945 Statuses=0009 0009 11:05:45 Msec=750 True Az=117.57 Ze=15.825 Az status=0009 Ze status=0009 11:05:45 Check angles 11:05:45 SkyScan query 11:05:46 SkyScan query done: ret=0 az=100.23<-6682 ze=-5.13<-12342 Statuses=0009 0009 11:05:46 Msec=1500 True Az=100.23 Ze=-5.13 Az status=0009 Ze status=0009 11:05:46 Check angles 11:05:46 SkyScan query 11:05:46 SkyScan query done: ret=0 az=82.575<-5505 ze=-26.1<-13740 Statuses=0009 0009 11:05:46 Msec=2250 True Az=82.575 Ze=-26.1 Az status=0009 Ze status=0009 11:05:47 Check angles 11:05:47 SkyScan query 11:05:47 SkyScan query done: ret=0 az=65.235<-4349 ze=-38.58<-14572 Statuses=0009 0008 11:05:47 Msec=3000 True Az=65.235 Ze=-38.58 Az status=0009 Ze status=0008 11:05:47 Check angles 11:05:47 SkyScan query 11:05:48 SkyScan query done: ret=0 az=47.64<-3176 ze=-38.52<-14568 Statuses=0009 0008 11:05:48 Msec=3750 True Az=47.64 Ze=-38.52 Az status=0009 Ze status=0008 11:05:48 Check angles 11:05:48 SkyScan query 11:05:49 SkyScan query done: ret=0 az=41.01<-2734 ze=-38.505<-14567 Statuses=0008 0008 11:05:49 Msec=4500 True Az=41.01 Ze=-38.505 Az status=0008 Ze status=0008 11:05:49 Message to Master queued w/err=0: serial=219351 error=0 11:05:54 Received message from Master: op=Filter serial=219352 11:05:54 Color wheel filter change from 0 to 0 11:05:54 FLIGetFilterPos err=0 currentPosition=0 11:05:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:54 Filter is already there-color wheel unchanged 11:05:54 Received message from Master: op=Shutter serial=219353 11:05:54 Shutter LASER close 11:05:54 Received message from Camera: op=State serial=219355 11:05:54 GetSingleValue result=40 Value=cccccccc 11:05:54 SkyScan query 11:05:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:05:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:54 Parameters OK 11:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:54 Set A/D data flow result=40 11:05:54 Set A/D channel type result=40 11:05:54 Set A/D encoding result=40 11:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:54 Set channel filter=0.000000e+000 result=40 11:05:54 Config A/D Result=40 11:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:54 Get A/D filter: -9.255963e+061 result=40 11:05:54 Get A/D value=-858993460 result=40 11:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:54 Parameters OK 11:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:54 Set A/D data flow result=40 11:05:54 Set A/D channel type result=40 11:05:54 Set A/D encoding result=40 11:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:54 Set channel filter=0.000000e+000 result=40 11:05:54 Config A/D Result=40 11:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:54 Get A/D filter: -9.255963e+061 result=40 11:05:54 Get A/D value=-858993460 result=40 11:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:54 Aux= 11:05:54 Message to Camera, serial 219355 queued 11:06:31 Received message from Master: op=PointingHead serial=219368 11:06:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:06:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:06:32 Point started: ret=0 11:06:32 point_skyscan result=0 11:06:32 Check angles 11:06:32 SkyScan query 11:06:33 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.835<-16589 Statuses=0009 0009 11:06:33 Msec=0 True Az=64.425 Ze=-68.835 Az status=0009 Ze status=0009 11:06:33 Check angles 11:06:33 SkyScan query 11:06:34 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.79<-17986 Statuses=0009 0009 11:06:34 Msec=750 True Az=81.9 Ze=-89.79 Az status=0009 Ze status=0009 11:06:34 Check angles 11:06:34 SkyScan query 11:06:34 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.76<-19384 Statuses=0009 0009 11:06:34 Msec=1500 True Az=99.405 Ze=-110.76 Az status=0009 Ze status=0009 11:06:35 Check angles 11:06:35 SkyScan query 11:06:35 SkyScan query done: ret=0 az=116.835<-7789 ze=-131.655<-20777 Statuses=0009 0009 11:06:35 Msec=2250 True Az=116.835 Ze=-131.655 Az status=0009 Ze status=0009 11:06:35 Check angles 11:06:35 SkyScan query 11:06:36 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 11:06:36 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 11:06:36 Check angles 11:06:36 SkyScan query 11:06:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:06:37 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:06:37 Message to Master queued w/err=0: serial=219368 error=0 11:06:42 Received message from Master: op=Filter serial=219369 11:06:42 Color wheel filter change from 0 to 0 11:06:42 FLIGetFilterPos err=0 currentPosition=0 11:06:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:42 Filter is already there-color wheel unchanged 11:06:42 Received message from Master: op=Shutter serial=219370 11:06:42 Shutter LASER close 11:06:42 Received message from Camera: op=State serial=219372 11:06:42 GetSingleValue result=40 Value=cccccccc 11:06:42 SkyScan query 11:06:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:06:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:42 Parameters OK 11:06:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:42 Set A/D data flow result=40 11:06:42 Set A/D channel type result=40 11:06:42 Set A/D encoding result=40 11:06:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:42 Set channel filter=0.000000e+000 result=40 11:06:42 Config A/D Result=40 11:06:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:42 Get A/D filter: -9.255963e+061 result=40 11:06:42 Get A/D value=-858993460 result=40 11:06:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:42 Parameters OK 11:06:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:42 Set A/D data flow result=40 11:06:42 Set A/D channel type result=40 11:06:42 Set A/D encoding result=40 11:06:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:42 Set channel filter=0.000000e+000 result=40 11:06:42 Config A/D Result=40 11:06:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:42 Get A/D filter: -9.255963e+061 result=40 11:06:42 Get A/D value=-858993460 result=40 11:06:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:42 Aux= 11:06:42 Message to Camera, serial 219372 queued 11:07:19 Received message from Master: op=PointingHead serial=219385 11:07:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:07:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:07:20 Point started: ret=0 11:07:20 point_skyscan result=0 11:07:20 Check angles 11:07:20 SkyScan query 11:07:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 11:07:21 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 11:07:21 Check angles 11:07:21 SkyScan query 11:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:07:22 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:07:22 Message to Master queued w/err=0: serial=219385 error=0 11:07:27 Received message from Master: op=Filter serial=219386 11:07:27 Color wheel filter change from 0 to 0 11:07:27 FLIGetFilterPos err=0 currentPosition=0 11:07:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:27 Filter is already there-color wheel unchanged 11:07:27 Received message from Master: op=Shutter serial=219387 11:07:27 Shutter LASER open 11:07:27 Received message from Camera: op=State serial=219389 11:07:27 GetSingleValue result=40 Value=cccccccc 11:07:27 SkyScan query 11:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:07:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:28 Parameters OK 11:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:28 Set A/D data flow result=40 11:07:28 Set A/D channel type result=40 11:07:28 Set A/D encoding result=40 11:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:28 Set channel filter=0.000000e+000 result=40 11:07:28 Config A/D Result=40 11:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:28 Get A/D filter: -9.255963e+061 result=40 11:07:28 Get A/D value=-858993460 result=40 11:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:28 Parameters OK 11:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:28 Set A/D data flow result=40 11:07:28 Set A/D channel type result=40 11:07:28 Set A/D encoding result=40 11:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:28 Set channel filter=0.000000e+000 result=40 11:07:28 Config A/D Result=40 11:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:28 Get A/D filter: -9.255963e+061 result=40 11:07:28 Get A/D value=-858993460 result=40 11:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:28 Aux= 11:07:28 Message to Camera, serial 219389 queued 11:07:36 Received message from Master: op=Shutter serial=219399 11:07:36 Shutter LASER close 11:07:37 Received message from Master: op=PointingHead serial=219403 11:07:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:07:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:07:37 Point started: ret=0 11:07:37 point_skyscan result=0 11:07:38 Check angles 11:07:38 SkyScan query 11:07:38 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.89<-21526 Statuses=0009 0009 11:07:38 Msec=0 True Az=136.41 Ze=-142.89 Az status=0009 Ze status=0009 11:07:39 Check angles 11:07:39 SkyScan query 11:07:39 SkyScan query done: ret=0 az=153.975<-10265 ze=-121.905<-20127 Statuses=0009 0009 11:07:39 Msec=750 True Az=153.975 Ze=-121.905 Az status=0009 Ze status=0009 11:07:39 Check angles 11:07:39 SkyScan query 11:07:40 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.965<-18731 Statuses=0009 0009 11:07:40 Msec=1500 True Az=171.42 Ze=-100.965 Az status=0009 Ze status=0009 11:07:40 Check angles 11:07:40 SkyScan query 11:07:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 11:07:41 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 11:07:41 Check angles 11:07:41 SkyScan query 11:07:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.04<-15936 Statuses=0008 0009 11:07:41 Msec=3000 True Az=175.995 Ze=-59.04 Az status=0008 Ze status=0009 11:07:42 Check angles 11:07:42 SkyScan query 11:07:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:07:42 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:07:42 Message to Master queued w/err=0: serial=219403 error=0 11:07:47 Received message from Master: op=Filter serial=219404 11:07:47 Color wheel filter change from 0 to 0 11:07:47 FLIGetFilterPos err=0 currentPosition=0 11:07:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:47 Filter is already there-color wheel unchanged 11:07:47 Received message from Master: op=Shutter serial=219405 11:07:47 Shutter LASER close 11:07:47 Received message from Camera: op=State serial=219407 11:07:47 GetSingleValue result=40 Value=cccccccc 11:07:47 SkyScan query 11:07:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:07:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:48 Parameters OK 11:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:48 Set A/D data flow result=40 11:07:48 Set A/D channel type result=40 11:07:48 Set A/D encoding result=40 11:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:48 Set channel filter=0.000000e+000 result=40 11:07:48 Config A/D Result=40 11:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:48 Get A/D filter: -9.255963e+061 result=40 11:07:48 Get A/D value=-858993460 result=40 11:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:48 Parameters OK 11:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:48 Set A/D data flow result=40 11:07:48 Set A/D channel type result=40 11:07:48 Set A/D encoding result=40 11:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:48 Set channel filter=0.000000e+000 result=40 11:07:48 Config A/D Result=40 11:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:48 Get A/D filter: -9.255963e+061 result=40 11:07:48 Get A/D value=-858993460 result=40 11:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:48 Aux= 11:07:48 Message to Camera, serial 219407 queued 11:08:25 Received message from Master: op=PointingHead serial=219420 11:08:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:08:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:08:25 Point started: ret=0 11:08:25 point_skyscan result=0 11:08:26 Check angles 11:08:26 SkyScan query 11:08:27 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.48<-13432 Statuses=0009 0009 11:08:27 Msec=0 True Az=152.745 Ze=-21.48 Az status=0009 Ze status=0009 11:08:27 Check angles 11:08:27 SkyScan query 11:08:27 SkyScan query done: ret=0 az=134.94<-8996 ze=-0.075<-12005 Statuses=0009 0009 11:08:27 Msec=750 True Az=134.94 Ze=-0.075 Az status=0009 Ze status=0009 11:08:27 Check angles 11:08:27 SkyScan query 11:08:28 SkyScan query done: ret=0 az=117.48<-7832 ze=20.985<-10601 Statuses=0009 0009 11:08:28 Msec=1500 True Az=117.48 Ze=20.985 Az status=0009 Ze status=0009 11:08:28 Check angles 11:08:28 SkyScan query 11:08:29 SkyScan query done: ret=0 az=100.08<-6672 ze=41.835<-9211 Statuses=0009 0009 11:08:29 Msec=2250 True Az=100.08 Ze=41.835 Az status=0009 Ze status=0009 11:08:29 Check angles 11:08:29 SkyScan query 11:08:30 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 11:08:30 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 11:08:30 Check angles 11:08:30 SkyScan query 11:08:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:08:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:08:30 Message to Master queued w/err=0: serial=219420 error=0 11:08:35 Received message from Master: op=Filter serial=219421 11:08:35 Color wheel filter change from 0 to 0 11:08:35 FLIGetFilterPos err=0 currentPosition=0 11:08:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:35 Filter is already there-color wheel unchanged 11:08:36 Received message from Master: op=Shutter serial=219422 11:08:36 Shutter LASER close 11:08:36 Received message from Camera: op=State serial=219424 11:08:36 GetSingleValue result=40 Value=cccccccc 11:08:36 SkyScan query 11:08:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:08:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:36 Parameters OK 11:08:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:36 Set A/D data flow result=40 11:08:36 Set A/D channel type result=40 11:08:36 Set A/D encoding result=40 11:08:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:36 Set channel filter=0.000000e+000 result=40 11:08:36 Config A/D Result=40 11:08:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:36 Get A/D filter: -9.255963e+061 result=40 11:08:36 Get A/D value=-858993460 result=40 11:08:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:36 Parameters OK 11:08:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:36 Set A/D data flow result=40 11:08:36 Set A/D channel type result=40 11:08:36 Set A/D encoding result=40 11:08:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:36 Set channel filter=0.000000e+000 result=40 11:08:36 Config A/D Result=40 11:08:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:36 Get A/D filter: -9.255963e+061 result=40 11:08:36 Get A/D value=-858993460 result=40 11:08:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:36 Aux= 11:08:36 Message to Camera, serial 219424 queued 11:09:13 Received message from Master: op=PointingHead serial=219437 11:09:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:09:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:09:13 Point started: ret=0 11:09:13 point_skyscan result=0 11:09:14 Check angles 11:09:14 SkyScan query 11:09:15 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 11:09:15 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 11:09:15 Check angles 11:09:15 SkyScan query 11:09:16 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 11:09:16 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 11:09:16 Check angles 11:09:16 SkyScan query 11:09:16 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 11:09:16 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 11:09:16 Check angles 11:09:16 SkyScan query 11:09:17 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 11:09:17 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 11:09:17 Check angles 11:09:17 SkyScan query 11:09:18 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:09:18 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:09:18 Check angles 11:09:18 SkyScan query 11:09:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:09:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:09:19 Message to Master queued w/err=0: serial=219437 error=0 11:09:24 Received message from Master: op=Filter serial=219438 11:09:24 Color wheel filter change from 0 to 0 11:09:24 FLIGetFilterPos err=0 currentPosition=0 11:09:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:24 Filter is already there-color wheel unchanged 11:09:24 Received message from Master: op=Shutter serial=219439 11:09:24 Shutter LASER close 11:09:24 Received message from Camera: op=State serial=219441 11:09:24 GetSingleValue result=40 Value=cccccccc 11:09:24 SkyScan query 11:09:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:09:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:24 Parameters OK 11:09:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:24 Set A/D data flow result=40 11:09:24 Set A/D channel type result=40 11:09:24 Set A/D encoding result=40 11:09:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:24 Set channel filter=0.000000e+000 result=40 11:09:24 Config A/D Result=40 11:09:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:24 Get A/D filter: -9.255963e+061 result=40 11:09:24 Get A/D value=-858993460 result=40 11:09:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:24 Parameters OK 11:09:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:24 Set A/D data flow result=40 11:09:24 Set A/D channel type result=40 11:09:24 Set A/D encoding result=40 11:09:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:24 Set channel filter=0.000000e+000 result=40 11:09:24 Config A/D Result=40 11:09:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:24 Get A/D filter: -9.255963e+061 result=40 11:09:24 Get A/D value=-858993460 result=40 11:09:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:24 Aux= 11:09:24 Message to Camera, serial 219441 queued 11:10:01 Received message from Master: op=PointingHead serial=219454 11:10:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:10:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:10:01 Point started: ret=0 11:10:01 point_skyscan result=0 11:10:02 Check angles 11:10:02 SkyScan query 11:10:03 SkyScan query done: ret=0 az=152.79<-10186 ze=8.49<-11434 Statuses=0009 0009 11:10:03 Msec=0 True Az=152.79 Ze=8.49 Az status=0009 Ze status=0009 11:10:03 Check angles 11:10:03 SkyScan query 11:10:04 SkyScan query done: ret=0 az=135.03<-9002 ze=-12.9<-12860 Statuses=0009 0009 11:10:04 Msec=750 True Az=135.03 Ze=-12.9 Az status=0009 Ze status=0009 11:10:04 Check angles 11:10:04 SkyScan query 11:10:04 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.885<-14259 Statuses=0009 0009 11:10:04 Msec=1500 True Az=117.54 Ze=-33.885 Az status=0009 Ze status=0009 11:10:04 Check angles 11:10:04 SkyScan query 11:10:05 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 11:10:05 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 11:10:05 Check angles 11:10:05 SkyScan query 11:10:06 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:10:06 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:10:06 Check angles 11:10:06 SkyScan query 11:10:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:10:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:10:07 Message to Master queued w/err=0: serial=219454 error=0 11:10:12 Received message from Master: op=Filter serial=219455 11:10:12 Color wheel filter change from 0 to 0 11:10:12 FLIGetFilterPos err=0 currentPosition=0 11:10:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:12 Filter is already there-color wheel unchanged 11:10:12 Received message from Master: op=Shutter serial=219456 11:10:12 Shutter LASER close 11:10:12 Received message from Camera: op=State serial=219458 11:10:12 GetSingleValue result=40 Value=cccccccc 11:10:12 SkyScan query 11:10:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:10:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:12 Parameters OK 11:10:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:12 Set A/D data flow result=40 11:10:12 Set A/D channel type result=40 11:10:12 Set A/D encoding result=40 11:10:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:12 Set channel filter=0.000000e+000 result=40 11:10:12 Config A/D Result=40 11:10:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:12 Get A/D filter: -9.255963e+061 result=40 11:10:12 Get A/D value=-858993460 result=40 11:10:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:12 Parameters OK 11:10:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:12 Set A/D data flow result=40 11:10:12 Set A/D channel type result=40 11:10:12 Set A/D encoding result=40 11:10:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:12 Set channel filter=0.000000e+000 result=40 11:10:12 Config A/D Result=40 11:10:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:12 Get A/D filter: -9.255963e+061 result=40 11:10:12 Get A/D value=-858993460 result=40 11:10:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:12 Aux= 11:10:12 Message to Camera, serial 219458 queued 11:10:49 Received message from Master: op=PointingHead serial=219471 11:10:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:10:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:10:50 Point started: ret=0 11:10:50 point_skyscan result=0 11:10:50 Check angles 11:10:50 SkyScan query 11:10:51 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.54<-17436 Statuses=0009 0009 11:10:51 Msec=0 True Az=109.185 Ze=-81.54 Az status=0009 Ze status=0009 11:10:51 Check angles 11:10:51 SkyScan query 11:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 11:10:52 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 11:10:52 Check angles 11:10:52 SkyScan query 11:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 11:10:52 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 11:10:53 Check angles 11:10:53 SkyScan query 11:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 11:10:53 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 11:10:53 Check angles 11:10:53 SkyScan query 11:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 11:10:54 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 11:10:54 Check angles 11:10:54 SkyScan query 11:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:10:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:10:55 Message to Master queued w/err=0: serial=219471 error=0 11:11:00 Received message from Master: op=Filter serial=219472 11:11:00 Color wheel filter change from 0 to 0 11:11:00 FLIGetFilterPos err=0 currentPosition=0 11:11:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:00 Filter is already there-color wheel unchanged 11:11:00 Received message from Master: op=Shutter serial=219473 11:11:00 Shutter LASER open 11:11:00 Received message from Camera: op=State serial=219475 11:11:00 GetSingleValue result=40 Value=cccccccc 11:11:00 SkyScan query 11:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:11:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:01 Parameters OK 11:11:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:01 Set A/D data flow result=40 11:11:01 Set A/D channel type result=40 11:11:01 Set A/D encoding result=40 11:11:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:01 Set channel filter=0.000000e+000 result=40 11:11:01 Config A/D Result=40 11:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:01 Get A/D filter: -9.255963e+061 result=40 11:11:01 Get A/D value=-858993460 result=40 11:11:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:01 Parameters OK 11:11:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:01 Set A/D data flow result=40 11:11:01 Set A/D channel type result=40 11:11:01 Set A/D encoding result=40 11:11:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:01 Set channel filter=0.000000e+000 result=40 11:11:01 Config A/D Result=40 11:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:01 Get A/D filter: -9.255963e+061 result=40 11:11:01 Get A/D value=-858993460 result=40 11:11:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:01 Aux= 11:11:01 Message to Camera, serial 219475 queued 11:11:09 Received message from Master: op=Shutter serial=219485 11:11:09 Shutter LASER close 11:11:09 Received message from Master: op=PointingHead serial=219489 11:11:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:11:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:11:10 Point started: ret=0 11:11:10 point_skyscan result=0 11:11:11 Check angles 11:11:11 SkyScan query 11:11:11 SkyScan query done: ret=0 az=89.655<-5977 ze=157.005<-1533 Statuses=0009 0009 11:11:11 Msec=0 True Az=89.655 Ze=157.005 Az status=0009 Ze status=0009 11:11:11 Check angles 11:11:11 SkyScan query 11:11:12 SkyScan query done: ret=0 az=71.835<-4789 ze=135.585<-2961 Statuses=0009 0009 11:11:12 Msec=750 True Az=71.835 Ze=135.585 Az status=0009 Ze status=0009 11:11:12 Check angles 11:11:12 SkyScan query 11:11:13 SkyScan query done: ret=0 az=54.51<-3634 ze=114.6<-4360 Statuses=0009 0009 11:11:13 Msec=1500 True Az=54.51 Ze=114.6 Az status=0009 Ze status=0009 11:11:13 Check angles 11:11:13 SkyScan query 11:11:13 SkyScan query done: ret=0 az=40.995<-2733 ze=93.69<-5754 Statuses=0009 0009 11:11:13 Msec=2250 True Az=40.995 Ze=93.69 Az status=0009 Ze status=0009 11:11:14 Check angles 11:11:14 SkyScan query 11:11:14 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 11:11:14 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 11:11:14 Check angles 11:11:14 SkyScan query 11:11:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 11:11:15 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 11:11:15 Check angles 11:11:15 SkyScan query 11:11:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:11:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:11:16 Message to Master queued w/err=0: serial=219489 error=0 11:11:21 Received message from Master: op=Filter serial=219490 11:11:21 Color wheel filter change from 0 to 0 11:11:21 FLIGetFilterPos err=0 currentPosition=0 11:11:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:21 Filter is already there-color wheel unchanged 11:11:21 Received message from Master: op=Shutter serial=219491 11:11:21 Shutter LASER close 11:11:21 Received message from Camera: op=State serial=219493 11:11:21 GetSingleValue result=40 Value=cccccccc 11:11:21 SkyScan query 11:11:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:11:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:22 Parameters OK 11:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:22 Set A/D data flow result=40 11:11:22 Set A/D channel type result=40 11:11:22 Set A/D encoding result=40 11:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:22 Set channel filter=0.000000e+000 result=40 11:11:22 Config A/D Result=40 11:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:22 Get A/D filter: -9.255963e+061 result=40 11:11:22 Get A/D value=-858993460 result=40 11:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:22 Parameters OK 11:11:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:22 Set A/D data flow result=40 11:11:22 Set A/D channel type result=40 11:11:22 Set A/D encoding result=40 11:11:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:22 Set channel filter=0.000000e+000 result=40 11:11:22 Config A/D Result=40 11:11:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:22 Get A/D filter: -9.255963e+061 result=40 11:11:22 Get A/D value=-858993460 result=40 11:11:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:22 Aux= 11:11:22 Message to Camera, serial 219493 queued 11:11:58 Received message from Master: op=PointingHead serial=219506 11:11:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:11:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:11:59 Point started: ret=0 11:11:59 point_skyscan result=0 11:11:59 Check angles 11:11:59 SkyScan query 11:12:00 SkyScan query done: ret=0 az=63.75<-4250 ze=66.525<-7565 Statuses=0009 0008 11:12:00 Msec=0 True Az=63.75 Ze=66.525 Az status=0009 Ze status=0008 11:12:00 Check angles 11:12:00 SkyScan query 11:12:01 SkyScan query done: ret=0 az=81.585<-5439 ze=66.51<-7566 Statuses=0009 0008 11:12:01 Msec=750 True Az=81.585 Ze=66.51 Az status=0009 Ze status=0008 11:12:01 Check angles 11:12:01 SkyScan query 11:12:02 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 11:12:02 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 11:12:02 Check angles 11:12:02 SkyScan query 11:12:02 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 11:12:02 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 11:12:03 Check angles 11:12:03 SkyScan query 11:12:03 SkyScan query done: ret=0 az=134.385<-8959 ze=66.495<-7567 Statuses=0009 0008 11:12:03 Msec=3000 True Az=134.385 Ze=66.495 Az status=0009 Ze status=0008 11:12:03 Check angles 11:12:03 SkyScan query 11:12:04 SkyScan query done: ret=0 az=151.665<-10111 ze=66.495<-7567 Statuses=0009 0008 11:12:04 Msec=3750 True Az=151.665 Ze=66.495 Az status=0009 Ze status=0008 11:12:04 Check angles 11:12:04 SkyScan query 11:12:05 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:12:05 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:12:05 Message to Master queued w/err=0: serial=219506 error=0 11:12:10 Received message from Master: op=Filter serial=219507 11:12:10 Color wheel filter change from 0 to 0 11:12:10 FLIGetFilterPos err=0 currentPosition=0 11:12:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:10 Filter is already there-color wheel unchanged 11:12:10 Received message from Master: op=Shutter serial=219508 11:12:10 Shutter LASER close 11:12:10 Received message from Camera: op=State serial=219510 11:12:10 GetSingleValue result=40 Value=cccccccc 11:12:10 SkyScan query 11:12:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:12:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:10 Parameters OK 11:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:10 Set A/D data flow result=40 11:12:10 Set A/D channel type result=40 11:12:10 Set A/D encoding result=40 11:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:10 Set channel filter=0.000000e+000 result=40 11:12:10 Config A/D Result=40 11:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:10 Get A/D filter: -9.255963e+061 result=40 11:12:10 Get A/D value=-858993460 result=40 11:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:10 Parameters OK 11:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:10 Set A/D data flow result=40 11:12:10 Set A/D channel type result=40 11:12:10 Set A/D encoding result=40 11:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:10 Set channel filter=0.000000e+000 result=40 11:12:10 Config A/D Result=40 11:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:10 Get A/D filter: -9.255963e+061 result=40 11:12:10 Get A/D value=-858993460 result=40 11:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:10 Aux= 11:12:10 Message to Camera, serial 219510 queued 11:12:47 Received message from Master: op=PointingHead serial=219523 11:12:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:12:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:12:48 Point started: ret=0 11:12:48 point_skyscan result=0 11:12:48 Check angles 11:12:48 SkyScan query 11:12:49 SkyScan query done: ret=0 az=135.165<-9011 ze=36.87<-9542 Statuses=0009 0009 11:12:49 Msec=0 True Az=135.165 Ze=36.87 Az status=0009 Ze status=0009 11:12:49 Check angles 11:12:49 SkyScan query 11:12:50 SkyScan query done: ret=0 az=117.72<-7848 ze=15.9<-10940 Statuses=0009 0009 11:12:50 Msec=750 True Az=117.72 Ze=15.9 Az status=0009 Ze status=0009 11:12:50 Check angles 11:12:50 SkyScan query 11:12:50 SkyScan query done: ret=0 az=100.29<-6686 ze=-5.025<-12335 Statuses=0009 0009 11:12:50 Msec=1500 True Az=100.29 Ze=-5.025 Az status=0009 Ze status=0009 11:12:51 Check angles 11:12:51 SkyScan query 11:12:51 SkyScan query done: ret=0 az=82.77<-5518 ze=-25.995<-13733 Statuses=0009 0009 11:12:51 Msec=2250 True Az=82.77 Ze=-25.995 Az status=0009 Ze status=0009 11:12:51 Check angles 11:12:51 SkyScan query 11:12:52 SkyScan query done: ret=0 az=65.43<-4362 ze=-38.58<-14572 Statuses=0009 0008 11:12:52 Msec=3000 True Az=65.43 Ze=-38.58 Az status=0009 Ze status=0008 11:12:52 Check angles 11:12:52 SkyScan query 11:12:53 SkyScan query done: ret=0 az=47.625<-3175 ze=-38.52<-14568 Statuses=0009 0008 11:12:53 Msec=3750 True Az=47.625 Ze=-38.52 Az status=0009 Ze status=0008 11:12:53 Check angles 11:12:53 SkyScan query 11:12:53 SkyScan query done: ret=0 az=41.01<-2734 ze=-38.505<-14567 Statuses=0008 0008 11:12:53 Msec=4500 True Az=41.01 Ze=-38.505 Az status=0008 Ze status=0008 11:12:53 Message to Master queued w/err=0: serial=219523 error=0 11:12:58 Received message from Master: op=Filter serial=219524 11:12:58 Color wheel filter change from 0 to 0 11:12:58 FLIGetFilterPos err=0 currentPosition=0 11:12:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:58 Filter is already there-color wheel unchanged 11:12:59 Received message from Master: op=Shutter serial=219525 11:12:59 Shutter LASER close 11:12:59 Received message from Camera: op=State serial=219527 11:12:59 GetSingleValue result=40 Value=cccccccc 11:12:59 SkyScan query 11:12:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:12:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:59 Parameters OK 11:12:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:59 Set A/D data flow result=40 11:12:59 Set A/D channel type result=40 11:12:59 Set A/D encoding result=40 11:12:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:59 Set channel filter=0.000000e+000 result=40 11:12:59 Config A/D Result=40 11:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:59 Get A/D filter: -9.255963e+061 result=40 11:12:59 Get A/D value=-858993460 result=40 11:12:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:59 Parameters OK 11:12:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:59 Set A/D data flow result=40 11:12:59 Set A/D channel type result=40 11:12:59 Set A/D encoding result=40 11:12:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:59 Set channel filter=0.000000e+000 result=40 11:12:59 Config A/D Result=40 11:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:59 Get A/D filter: -9.255963e+061 result=40 11:12:59 Get A/D value=-858993460 result=40 11:12:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:59 Aux= 11:12:59 Message to Camera, serial 219527 queued 11:13:36 Received message from Master: op=PointingHead serial=219540 11:13:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:13:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:13:36 Point started: ret=0 11:13:36 point_skyscan result=0 11:13:37 Check angles 11:13:37 SkyScan query 11:13:38 SkyScan query done: ret=0 az=64.47<-4298 ze=-68.715<-16581 Statuses=0009 0009 11:13:38 Msec=0 True Az=64.47 Ze=-68.715 Az status=0009 Ze status=0009 11:13:38 Check angles 11:13:38 SkyScan query 11:13:39 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.685<-17979 Statuses=0009 0009 11:13:39 Msec=750 True Az=81.84 Ze=-89.685 Az status=0009 Ze status=0009 11:13:39 Check angles 11:13:39 SkyScan query 11:13:39 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.64<-19376 Statuses=0009 0009 11:13:39 Msec=1500 True Az=99.45 Ze=-110.64 Az status=0009 Ze status=0009 11:13:39 Check angles 11:13:39 SkyScan query 11:13:40 SkyScan query done: ret=0 az=116.835<-7789 ze=-131.565<-20771 Statuses=0009 0009 11:13:40 Msec=2250 True Az=116.835 Ze=-131.565 Az status=0009 Ze status=0009 11:13:40 Check angles 11:13:40 SkyScan query 11:13:41 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 11:13:41 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 11:13:41 Check angles 11:13:41 SkyScan query 11:13:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:13:42 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:13:42 Message to Master queued w/err=0: serial=219540 error=0 11:13:47 Received message from Master: op=Filter serial=219541 11:13:47 Color wheel filter change from 0 to 0 11:13:47 FLIGetFilterPos err=0 currentPosition=0 11:13:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:47 Filter is already there-color wheel unchanged 11:13:47 Received message from Master: op=Shutter serial=219542 11:13:47 Shutter LASER close 11:13:47 Received message from Camera: op=State serial=219544 11:13:47 GetSingleValue result=40 Value=cccccccc 11:13:47 SkyScan query 11:13:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:13:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:47 Parameters OK 11:13:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:47 Set A/D data flow result=40 11:13:47 Set A/D channel type result=40 11:13:47 Set A/D encoding result=40 11:13:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:47 Set channel filter=0.000000e+000 result=40 11:13:47 Config A/D Result=40 11:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:47 Get A/D filter: -9.255963e+061 result=40 11:13:47 Get A/D value=-858993460 result=40 11:13:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:47 Parameters OK 11:13:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:47 Set A/D data flow result=40 11:13:47 Set A/D channel type result=40 11:13:47 Set A/D encoding result=40 11:13:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:47 Set channel filter=0.000000e+000 result=40 11:13:47 Config A/D Result=40 11:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:47 Get A/D filter: -9.255963e+061 result=40 11:13:47 Get A/D value=-858993460 result=40 11:13:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:47 Aux= 11:13:47 Message to Camera, serial 219544 queued 11:14:24 Received message from Master: op=PointingHead serial=219557 11:14:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:14:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:14:25 Point started: ret=0 11:14:25 point_skyscan result=0 11:14:25 Check angles 11:14:25 SkyScan query 11:14:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 11:14:26 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 11:14:26 Check angles 11:14:26 SkyScan query 11:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:14:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:14:27 Message to Master queued w/err=0: serial=219557 error=0 11:14:32 Received message from Master: op=Filter serial=219558 11:14:32 Color wheel filter change from 0 to 0 11:14:32 FLIGetFilterPos err=0 currentPosition=0 11:14:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:32 Filter is already there-color wheel unchanged 11:14:32 Received message from Master: op=Shutter serial=219559 11:14:32 Shutter LASER open 11:14:32 Received message from Camera: op=State serial=219561 11:14:32 GetSingleValue result=40 Value=cccccccc 11:14:32 SkyScan query 11:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:14:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:33 Parameters OK 11:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:33 Set A/D data flow result=40 11:14:33 Set A/D channel type result=40 11:14:33 Set A/D encoding result=40 11:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:33 Set channel filter=0.000000e+000 result=40 11:14:33 Config A/D Result=40 11:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:33 Get A/D filter: -9.255963e+061 result=40 11:14:33 Get A/D value=-858993460 result=40 11:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:33 Parameters OK 11:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:33 Set A/D data flow result=40 11:14:33 Set A/D channel type result=40 11:14:33 Set A/D encoding result=40 11:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:33 Set channel filter=0.000000e+000 result=40 11:14:33 Config A/D Result=40 11:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:33 Get A/D filter: -9.255963e+061 result=40 11:14:33 Get A/D value=-858993460 result=40 11:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:33 Aux= 11:14:33 Message to Camera, serial 219561 queued 11:14:41 Received message from Master: op=Shutter serial=219571 11:14:41 Shutter LASER close 11:14:42 Received message from Master: op=PointingHead serial=219575 11:14:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:14:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:14:42 Point started: ret=0 11:14:42 point_skyscan result=0 11:14:43 Check angles 11:14:43 SkyScan query 11:14:43 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.71<-21514 Statuses=0009 0009 11:14:43 Msec=0 True Az=136.41 Ze=-142.71 Az status=0009 Ze status=0009 11:14:43 Check angles 11:14:43 SkyScan query 11:14:44 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.77<-20118 Statuses=0009 0009 11:14:44 Msec=750 True Az=153.96 Ze=-121.77 Az status=0009 Ze status=0009 11:14:44 Check angles 11:14:44 SkyScan query 11:14:45 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.77<-18718 Statuses=0009 0009 11:14:45 Msec=1500 True Az=171.39 Ze=-100.77 Az status=0009 Ze status=0009 11:14:45 Check angles 11:14:45 SkyScan query 11:14:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.92<-17328 Statuses=0008 0009 11:14:46 Msec=2250 True Az=176.01 Ze=-79.92 Az status=0008 Ze status=0009 11:14:46 Check angles 11:14:46 SkyScan query 11:14:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.92<-15928 Statuses=0008 0009 11:14:46 Msec=3000 True Az=175.995 Ze=-58.92 Az status=0008 Ze status=0009 11:14:46 Check angles 11:14:46 SkyScan query 11:14:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:14:47 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:14:47 Message to Master queued w/err=0: serial=219575 error=0 11:14:52 Received message from Master: op=Filter serial=219576 11:14:52 Color wheel filter change from 0 to 0 11:14:52 FLIGetFilterPos err=0 currentPosition=0 11:14:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:52 Filter is already there-color wheel unchanged 11:14:52 Received message from Master: op=Shutter serial=219577 11:14:52 Shutter LASER close 11:14:52 Received message from Camera: op=State serial=219579 11:14:52 GetSingleValue result=40 Value=cccccccc 11:14:52 SkyScan query 11:14:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:14:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:53 Parameters OK 11:14:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:53 Set A/D data flow result=40 11:14:53 Set A/D channel type result=40 11:14:53 Set A/D encoding result=40 11:14:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:53 Set channel filter=0.000000e+000 result=40 11:14:53 Config A/D Result=40 11:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:53 Get A/D filter: -9.255963e+061 result=40 11:14:53 Get A/D value=-858993460 result=40 11:14:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:53 Parameters OK 11:14:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:53 Set A/D data flow result=40 11:14:53 Set A/D channel type result=40 11:14:53 Set A/D encoding result=40 11:14:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:53 Set channel filter=0.000000e+000 result=40 11:14:53 Config A/D Result=40 11:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:53 Get A/D filter: -9.255963e+061 result=40 11:14:53 Get A/D value=-858993460 result=40 11:14:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:53 Aux= 11:14:53 Message to Camera, serial 219579 queued 11:15:27 Received message from Master: op=Identify serial=219586 11:15:30 Received message from Master: op=PointingHead serial=219595 11:15:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:15:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:15:30 Point started: ret=0 11:15:30 point_skyscan result=0 11:15:31 Check angles 11:15:31 SkyScan query 11:15:31 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.645<-13443 Statuses=0009 0009 11:15:31 Msec=0 True Az=152.73 Ze=-21.645 Az status=0009 Ze status=0009 [UTC 2018-12-17 11:15:32] 11:15:32 Check angles 11:15:32 SkyScan query 11:15:32 SkyScan query done: ret=0 az=133.83<-8922 ze=1.08<-11928 Statuses=0009 0009 11:15:32 Msec=750 True Az=133.83 Ze=1.08 Az status=0009 Ze status=0009 11:15:32 Check angles 11:15:32 SkyScan query 11:15:33 SkyScan query done: ret=0 az=117.78<-7852 ze=20.265<-10649 Statuses=0009 0009 11:15:33 Msec=1500 True Az=117.78 Ze=20.265 Az status=0009 Ze status=0009 11:15:33 Check angles 11:15:33 SkyScan query 11:15:34 SkyScan query done: ret=0 az=100.425<-6695 ze=41.25<-9250 Statuses=0009 0009 11:15:34 Msec=2250 True Az=100.425 Ze=41.25 Az status=0009 Ze status=0009 11:15:34 Check angles 11:15:34 SkyScan query 11:15:34 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 11:15:34 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 11:15:35 Check angles 11:15:35 SkyScan query 11:15:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:15:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:15:35 Message to Master queued w/err=0: serial=219595 error=0 11:15:40 Received message from Master: op=Filter serial=219596 11:15:40 Color wheel filter change from 0 to 0 11:15:40 FLIGetFilterPos err=0 currentPosition=0 11:15:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:40 Filter is already there-color wheel unchanged 11:15:40 Received message from Master: op=Shutter serial=219597 11:15:40 Shutter LASER close 11:15:40 Received message from Camera: op=State serial=219599 11:15:40 GetSingleValue result=40 Value=cccccccc 11:15:40 SkyScan query 11:15:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:15:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:41 Parameters OK 11:15:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:41 Set A/D data flow result=40 11:15:41 Set A/D channel type result=40 11:15:41 Set A/D encoding result=40 11:15:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:41 Set channel filter=0.000000e+000 result=40 11:15:41 Config A/D Result=40 11:15:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:41 Get A/D filter: -9.255963e+061 result=40 11:15:41 Get A/D value=-858993460 result=40 11:15:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:41 Parameters OK 11:15:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:41 Set A/D data flow result=40 11:15:41 Set A/D channel type result=40 11:15:41 Set A/D encoding result=40 11:15:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:41 Set channel filter=0.000000e+000 result=40 11:15:41 Config A/D Result=40 11:15:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:41 Get A/D filter: -9.255963e+061 result=40 11:15:41 Get A/D value=-858993460 result=40 11:15:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:41 Aux= 11:15:41 Message to Camera, serial 219599 queued [UTC 2018-12-17 11:15:52] 11:16:18 Received message from Master: op=PointingHead serial=219612 11:16:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:16:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:16:18 Point started: ret=0 11:16:18 point_skyscan result=0 11:16:19 Check angles 11:16:19 SkyScan query 11:16:19 SkyScan query done: ret=0 az=108.93<-7262 ze=38.475<-9435 Statuses=0009 0008 11:16:19 Msec=0 True Az=108.93 Ze=38.475 Az status=0009 Ze status=0008 11:16:20 Check angles 11:16:20 SkyScan query 11:16:20 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 11:16:20 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 11:16:20 Check angles 11:16:20 SkyScan query 11:16:21 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 11:16:21 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 11:16:21 Check angles 11:16:21 SkyScan query 11:16:22 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 11:16:22 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 11:16:22 Check angles 11:16:22 SkyScan query 11:16:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:16:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:16:23 Check angles 11:16:23 SkyScan query 11:16:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:16:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:16:23 Message to Master queued w/err=0: serial=219612 error=0 11:16:28 Received message from Master: op=Filter serial=219613 11:16:28 Color wheel filter change from 0 to 0 11:16:28 FLIGetFilterPos err=0 currentPosition=0 11:16:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:28 Filter is already there-color wheel unchanged 11:16:28 Received message from Master: op=Shutter serial=219614 11:16:28 Shutter LASER close 11:16:28 Received message from Camera: op=State serial=219616 11:16:28 GetSingleValue result=40 Value=cccccccc 11:16:28 SkyScan query 11:16:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:16:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:29 Parameters OK 11:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:29 Set A/D data flow result=40 11:16:29 Set A/D channel type result=40 11:16:29 Set A/D encoding result=40 11:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:29 Set channel filter=0.000000e+000 result=40 11:16:29 Config A/D Result=40 11:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:29 Get A/D filter: -9.255963e+061 result=40 11:16:29 Get A/D value=-858993460 result=40 11:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:29 Parameters OK 11:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:29 Set A/D data flow result=40 11:16:29 Set A/D channel type result=40 11:16:29 Set A/D encoding result=40 11:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:29 Set channel filter=0.000000e+000 result=40 11:16:29 Config A/D Result=40 11:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:29 Get A/D filter: -9.255963e+061 result=40 11:16:29 Get A/D value=-858993460 result=40 11:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:29 Aux= 11:16:29 Message to Camera, serial 219616 queued 11:17:06 Received message from Master: op=PointingHead serial=219629 11:17:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:17:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:17:06 Point started: ret=0 11:17:06 point_skyscan result=0 11:17:07 Check angles 11:17:07 SkyScan query 11:17:08 SkyScan query done: ret=0 az=153.225<-10215 ze=8.91<-11406 Statuses=0009 0009 11:17:08 Msec=0 True Az=153.225 Ze=8.91 Az status=0009 Ze status=0009 11:17:08 Check angles 11:17:08 SkyScan query 11:17:08 SkyScan query done: ret=0 az=135.81<-9054 ze=-12.045<-12803 Statuses=0009 0009 11:17:08 Msec=750 True Az=135.81 Ze=-12.045 Az status=0009 Ze status=0009 11:17:08 Check angles 11:17:08 SkyScan query 11:17:09 SkyScan query done: ret=0 az=118.23<-7882 ze=-32.97<-14198 Statuses=0009 0009 11:17:09 Msec=1500 True Az=118.23 Ze=-32.97 Az status=0009 Ze status=0009 11:17:09 Check angles 11:17:09 SkyScan query 11:17:10 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.51<-15434 Statuses=0009 0009 11:17:10 Msec=2250 True Az=100.845 Ze=-51.51 Az status=0009 Ze status=0009 11:17:10 Check angles 11:17:10 SkyScan query 11:17:11 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 11:17:11 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 11:17:11 Check angles 11:17:11 SkyScan query 11:17:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:17:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:17:11 Message to Master queued w/err=0: serial=219629 error=0 11:17:16 Received message from Master: op=Filter serial=219630 11:17:16 Color wheel filter change from 0 to 0 11:17:16 FLIGetFilterPos err=0 currentPosition=0 11:17:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:16 Filter is already there-color wheel unchanged 11:17:16 Received message from Master: op=Shutter serial=219631 11:17:16 Shutter LASER close 11:17:16 Received message from Camera: op=State serial=219633 11:17:16 GetSingleValue result=40 Value=cccccccc 11:17:16 SkyScan query 11:17:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:17:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:17 Parameters OK 11:17:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:17 Set A/D data flow result=40 11:17:17 Set A/D channel type result=40 11:17:17 Set A/D encoding result=40 11:17:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:17 Set channel filter=0.000000e+000 result=40 11:17:17 Config A/D Result=40 11:17:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:17 Get A/D filter: -9.255963e+061 result=40 11:17:17 Get A/D value=-858993460 result=40 11:17:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:17 Parameters OK 11:17:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:17 Set A/D data flow result=40 11:17:17 Set A/D channel type result=40 11:17:17 Set A/D encoding result=40 11:17:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:17 Set channel filter=0.000000e+000 result=40 11:17:17 Config A/D Result=40 11:17:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:17 Get A/D filter: -9.255963e+061 result=40 11:17:17 Get A/D value=-858993460 result=40 11:17:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:17 Aux= 11:17:17 Message to Camera, serial 219633 queued 11:17:54 Received message from Master: op=PointingHead serial=219646 11:17:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:17:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:17:54 Point started: ret=0 11:17:54 point_skyscan result=0 11:17:55 Check angles 11:17:55 SkyScan query 11:17:56 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.06<-17404 Statuses=0009 0009 11:17:56 Msec=0 True Az=108.93 Ze=-81.06 Az status=0009 Ze status=0009 11:17:56 Check angles 11:17:56 SkyScan query 11:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 11:17:56 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 11:17:56 Check angles 11:17:56 SkyScan query 11:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 11:17:57 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 11:17:57 Check angles 11:17:57 SkyScan query 11:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 11:17:58 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 11:17:58 Check angles 11:17:58 SkyScan query 11:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 11:17:59 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 11:17:59 Check angles 11:17:59 SkyScan query 11:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:17:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:17:59 Message to Master queued w/err=0: serial=219646 error=0 11:18:04 Received message from Master: op=Filter serial=219647 11:18:04 Color wheel filter change from 0 to 0 11:18:04 FLIGetFilterPos err=0 currentPosition=0 11:18:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:04 Filter is already there-color wheel unchanged 11:18:04 Received message from Master: op=Shutter serial=219648 11:18:04 Shutter LASER open 11:18:05 Received message from Camera: op=State serial=219650 11:18:05 GetSingleValue result=40 Value=cccccccc 11:18:05 SkyScan query 11:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:18:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:05 Parameters OK 11:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:05 Set A/D data flow result=40 11:18:05 Set A/D channel type result=40 11:18:05 Set A/D encoding result=40 11:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:05 Set channel filter=0.000000e+000 result=40 11:18:05 Config A/D Result=40 11:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:05 Get A/D filter: -9.255963e+061 result=40 11:18:05 Get A/D value=-858993460 result=40 11:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:05 Parameters OK 11:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:05 Set A/D data flow result=40 11:18:05 Set A/D channel type result=40 11:18:05 Set A/D encoding result=40 11:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:05 Set channel filter=0.000000e+000 result=40 11:18:05 Config A/D Result=40 11:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:05 Get A/D filter: -9.255963e+061 result=40 11:18:05 Get A/D value=-858993460 result=40 11:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:05 Aux= 11:18:05 Message to Camera, serial 219650 queued 11:18:13 Received message from Master: op=Shutter serial=219659 11:18:13 Shutter LASER close 11:18:13 Received message from Master: op=PointingHead serial=219663 11:18:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:18:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:18:14 Point started: ret=0 11:18:14 point_skyscan result=0 11:18:14 Check angles 11:18:14 SkyScan query 11:18:15 SkyScan query done: ret=0 az=89.91<-5994 ze=157.29<-1514 Statuses=0009 0009 11:18:15 Msec=0 True Az=89.91 Ze=157.29 Az status=0009 Ze status=0009 11:18:15 Check angles 11:18:15 SkyScan query 11:18:16 SkyScan query done: ret=0 az=72.51<-4834 ze=136.335<-2911 Statuses=0009 0009 11:18:16 Msec=750 True Az=72.51 Ze=136.335 Az status=0009 Ze status=0009 11:18:16 Check angles 11:18:16 SkyScan query 11:18:16 SkyScan query done: ret=0 az=55.08<-3672 ze=115.425<-4305 Statuses=0009 0009 11:18:16 Msec=1500 True Az=55.08 Ze=115.425 Az status=0009 Ze status=0009 11:18:17 Check angles 11:18:17 SkyScan query 11:18:17 SkyScan query done: ret=0 az=41.01<-2734 ze=94.005<-5733 Statuses=0009 0009 11:18:17 Msec=2250 True Az=41.01 Ze=94.005 Az status=0009 Ze status=0009 11:18:17 Check angles 11:18:17 SkyScan query 11:18:18 SkyScan query done: ret=0 az=40.98<-2732 ze=73.02<-7132 Statuses=0008 0009 11:18:18 Msec=3000 True Az=40.98 Ze=73.02 Az status=0008 Ze status=0009 11:18:18 Check angles 11:18:18 SkyScan query 11:18:19 SkyScan query done: ret=0 az=40.98<-2732 ze=52.605<-8493 Statuses=0008 0009 11:18:19 Msec=3750 True Az=40.98 Ze=52.605 Az status=0008 Ze status=0009 11:18:19 Check angles 11:18:19 SkyScan query 11:18:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:18:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:18:19 Message to Master queued w/err=0: serial=219663 error=0 11:18:24 Received message from Master: op=Filter serial=219664 11:18:24 Color wheel filter change from 0 to 0 11:18:24 FLIGetFilterPos err=0 currentPosition=0 11:18:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:24 Filter is already there-color wheel unchanged 11:18:25 Received message from Master: op=Shutter serial=219665 11:18:25 Shutter LASER close 11:18:25 Received message from Camera: op=State serial=219667 11:18:25 GetSingleValue result=40 Value=cccccccc 11:18:25 SkyScan query 11:18:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:18:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:25 Parameters OK 11:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:25 Set A/D data flow result=40 11:18:25 Set A/D channel type result=40 11:18:25 Set A/D encoding result=40 11:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:25 Set channel filter=0.000000e+000 result=40 11:18:25 Config A/D Result=40 11:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:25 Get A/D filter: -9.255963e+061 result=40 11:18:25 Get A/D value=-858993460 result=40 11:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:25 Parameters OK 11:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:25 Set A/D data flow result=40 11:18:25 Set A/D channel type result=40 11:18:25 Set A/D encoding result=40 11:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:25 Set channel filter=0.000000e+000 result=40 11:18:25 Config A/D Result=40 11:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:25 Get A/D filter: -9.255963e+061 result=40 11:18:25 Get A/D value=-858993460 result=40 11:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:25 Aux= 11:18:25 Message to Camera, serial 219667 queued 11:19:02 Received message from Master: op=PointingHead serial=219680 11:19:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:19:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:19:02 Point started: ret=0 11:19:02 point_skyscan result=0 11:19:03 Check angles 11:19:03 SkyScan query 11:19:04 SkyScan query done: ret=0 az=64.11<-4274 ze=66.555<-7563 Statuses=0009 0008 11:19:04 Msec=0 True Az=64.11 Ze=66.555 Az status=0009 Ze status=0008 11:19:04 Check angles 11:19:04 SkyScan query 11:19:05 SkyScan query done: ret=0 az=81.39<-5426 ze=66.495<-7567 Statuses=0009 0008 11:19:05 Msec=750 True Az=81.39 Ze=66.495 Az status=0009 Ze status=0008 11:19:05 Check angles 11:19:05 SkyScan query 11:19:05 SkyScan query done: ret=0 az=99.06<-6604 ze=66.495<-7567 Statuses=0009 0008 11:19:05 Msec=1500 True Az=99.06 Ze=66.495 Az status=0009 Ze status=0008 11:19:05 Check angles 11:19:05 SkyScan query 11:19:06 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 11:19:06 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 11:19:06 Check angles 11:19:06 SkyScan query 11:19:07 SkyScan query done: ret=0 az=134.34<-8956 ze=66.495<-7567 Statuses=0009 0008 11:19:07 Msec=3000 True Az=134.34 Ze=66.495 Az status=0009 Ze status=0008 11:19:07 Check angles 11:19:07 SkyScan query 11:19:08 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 11:19:08 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 11:19:08 Check angles 11:19:08 SkyScan query 11:19:08 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:19:08 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:19:08 Message to Master queued w/err=0: serial=219680 error=0 11:19:13 Received message from Master: op=Filter serial=219681 11:19:13 Color wheel filter change from 0 to 0 11:19:13 FLIGetFilterPos err=0 currentPosition=0 11:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:13 Filter is already there-color wheel unchanged 11:19:13 Received message from Master: op=Shutter serial=219682 11:19:13 Shutter LASER close 11:19:14 Received message from Camera: op=State serial=219684 11:19:14 GetSingleValue result=40 Value=cccccccc 11:19:14 SkyScan query 11:19:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:14 Parameters OK 11:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:14 Set A/D data flow result=40 11:19:14 Set A/D channel type result=40 11:19:14 Set A/D encoding result=40 11:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:14 Set channel filter=0.000000e+000 result=40 11:19:14 Config A/D Result=40 11:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:14 Get A/D filter: -9.255963e+061 result=40 11:19:14 Get A/D value=-858993460 result=40 11:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:14 Parameters OK 11:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:14 Set A/D data flow result=40 11:19:14 Set A/D channel type result=40 11:19:14 Set A/D encoding result=40 11:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:14 Set channel filter=0.000000e+000 result=40 11:19:14 Config A/D Result=40 11:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:14 Get A/D filter: -9.255963e+061 result=40 11:19:14 Get A/D value=-858993460 result=40 11:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:14 Aux= 11:19:14 Message to Camera, serial 219684 queued 11:19:51 Received message from Master: op=PointingHead serial=219697 11:19:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:19:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:19:51 Point started: ret=0 11:19:51 point_skyscan result=0 11:19:52 Check angles 11:19:52 SkyScan query 11:19:53 SkyScan query done: ret=0 az=135.195<-9013 ze=36.915<-9539 Statuses=0009 0009 11:19:53 Msec=0 True Az=135.195 Ze=36.915 Az status=0009 Ze status=0009 11:19:53 Check angles 11:19:53 SkyScan query 11:19:53 SkyScan query done: ret=0 az=117.27<-7818 ze=15.585<-10961 Statuses=0009 0009 11:19:53 Msec=750 True Az=117.27 Ze=15.585 Az status=0009 Ze status=0009 11:19:54 Check angles 11:19:54 SkyScan query 11:19:54 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.415<-12361 Statuses=0009 0009 11:19:54 Msec=1500 True Az=99.945 Ze=-5.415 Az status=0009 Ze status=0009 11:19:54 Check angles 11:19:54 SkyScan query 11:19:55 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.355<-13757 Statuses=0009 0009 11:19:55 Msec=2250 True Az=82.41 Ze=-26.355 Az status=0009 Ze status=0009 11:19:55 Check angles 11:19:55 SkyScan query 11:19:56 SkyScan query done: ret=0 az=64.95<-4330 ze=-38.58<-14572 Statuses=0009 0008 11:19:56 Msec=3000 True Az=64.95 Ze=-38.58 Az status=0009 Ze status=0008 11:19:56 Check angles 11:19:56 SkyScan query 11:19:56 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.52<-14568 Statuses=0009 0008 11:19:56 Msec=3750 True Az=47.505 Ze=-38.52 Az status=0009 Ze status=0008 11:19:57 Check angles 11:19:57 SkyScan query 11:19:57 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 11:19:57 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 11:19:57 Message to Master queued w/err=0: serial=219697 error=0 11:20:02 Received message from Master: op=Filter serial=219698 11:20:02 Color wheel filter change from 0 to 0 11:20:02 FLIGetFilterPos err=0 currentPosition=0 11:20:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:02 Filter is already there-color wheel unchanged 11:20:02 Received message from Master: op=Shutter serial=219699 11:20:02 Shutter LASER close 11:20:02 Received message from Camera: op=State serial=219701 11:20:02 GetSingleValue result=40 Value=cccccccc 11:20:02 SkyScan query 11:20:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:20:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:03 Parameters OK 11:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:03 Set A/D data flow result=40 11:20:03 Set A/D channel type result=40 11:20:03 Set A/D encoding result=40 11:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:03 Set channel filter=0.000000e+000 result=40 11:20:03 Config A/D Result=40 11:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:03 Get A/D filter: -9.255963e+061 result=40 11:20:03 Get A/D value=-858993460 result=40 11:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:03 Parameters OK 11:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:03 Set A/D data flow result=40 11:20:03 Set A/D channel type result=40 11:20:03 Set A/D encoding result=40 11:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:03 Set channel filter=0.000000e+000 result=40 11:20:03 Config A/D Result=40 11:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:03 Get A/D filter: -9.255963e+061 result=40 11:20:03 Get A/D value=-858993460 result=40 11:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:03 Aux= 11:20:03 Message to Camera, serial 219701 queued 11:20:40 Received message from Master: op=PointingHead serial=219714 11:20:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:20:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:20:40 Point started: ret=0 11:20:40 point_skyscan result=0 11:20:41 Check angles 11:20:41 SkyScan query 11:20:41 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.355<-16557 Statuses=0009 0009 11:20:41 Msec=0 True Az=64.23 Ze=-68.355 Az status=0009 Ze status=0009 11:20:42 Check angles 11:20:42 SkyScan query 11:20:42 SkyScan query done: ret=0 az=81.525<-5435 ze=-89.37<-17958 Statuses=0009 0009 11:20:42 Msec=750 True Az=81.525 Ze=-89.37 Az status=0009 Ze status=0009 11:20:42 Check angles 11:20:42 SkyScan query 11:20:43 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.31<-19354 Statuses=0009 0009 11:20:43 Msec=1500 True Az=99.195 Ze=-110.31 Az status=0009 Ze status=0009 11:20:43 Check angles 11:20:43 SkyScan query 11:20:44 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.235<-20749 Statuses=0009 0009 11:20:44 Msec=2250 True Az=116.64 Ze=-131.235 Az status=0009 Ze status=0009 11:20:44 Check angles 11:20:44 SkyScan query 11:20:44 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 11:20:44 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 11:20:45 Check angles 11:20:45 SkyScan query 11:20:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:20:45 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:20:45 Message to Master queued w/err=0: serial=219714 error=0 11:20:50 Received message from Master: op=Filter serial=219715 11:20:50 Color wheel filter change from 0 to 0 11:20:50 FLIGetFilterPos err=0 currentPosition=0 11:20:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:50 Filter is already there-color wheel unchanged 11:20:50 Received message from Master: op=Shutter serial=219716 11:20:50 Shutter LASER close 11:20:50 Received message from Camera: op=State serial=219718 11:20:50 GetSingleValue result=40 Value=cccccccc 11:20:50 SkyScan query 11:20:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:20:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:51 Parameters OK 11:20:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:51 Set A/D data flow result=40 11:20:51 Set A/D channel type result=40 11:20:51 Set A/D encoding result=40 11:20:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:51 Set channel filter=0.000000e+000 result=40 11:20:51 Config A/D Result=40 11:20:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:51 Get A/D filter: -9.255963e+061 result=40 11:20:51 Get A/D value=-858993460 result=40 11:20:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:51 Parameters OK 11:20:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:51 Set A/D data flow result=40 11:20:51 Set A/D channel type result=40 11:20:51 Set A/D encoding result=40 11:20:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:51 Set channel filter=0.000000e+000 result=40 11:20:51 Config A/D Result=40 11:20:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:51 Get A/D filter: -9.255963e+061 result=40 11:20:51 Get A/D value=-858993460 result=40 11:20:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:51 Aux= 11:20:51 Message to Camera, serial 219718 queued 11:21:28 Received message from Master: op=PointingHead serial=219731 11:21:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:21:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:21:28 Point started: ret=0 11:21:28 point_skyscan result=0 11:21:29 Check angles 11:21:29 SkyScan query 11:21:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 11:21:29 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 11:21:30 Check angles 11:21:30 SkyScan query 11:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:21:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:21:30 Message to Master queued w/err=0: serial=219731 error=0 11:21:35 Received message from Master: op=Filter serial=219732 11:21:35 Color wheel filter change from 0 to 0 11:21:35 FLIGetFilterPos err=0 currentPosition=0 11:21:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:35 Filter is already there-color wheel unchanged 11:21:35 Received message from Master: op=Shutter serial=219733 11:21:35 Shutter LASER open 11:21:36 Received message from Camera: op=State serial=219735 11:21:36 GetSingleValue result=40 Value=cccccccc 11:21:36 SkyScan query 11:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:21:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:36 Parameters OK 11:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:36 Set A/D data flow result=40 11:21:36 Set A/D channel type result=40 11:21:36 Set A/D encoding result=40 11:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:36 Set channel filter=0.000000e+000 result=40 11:21:36 Config A/D Result=40 11:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:36 Get A/D filter: -9.255963e+061 result=40 11:21:36 Get A/D value=-858993460 result=40 11:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:36 Parameters OK 11:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:36 Set A/D data flow result=40 11:21:36 Set A/D channel type result=40 11:21:36 Set A/D encoding result=40 11:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:36 Set channel filter=0.000000e+000 result=40 11:21:36 Config A/D Result=40 11:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:36 Get A/D filter: -9.255963e+061 result=40 11:21:36 Get A/D value=-858993460 result=40 11:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:36 Aux= 11:21:36 Message to Camera, serial 219735 queued 11:21:45 Received message from Master: op=Shutter serial=219745 11:21:45 Shutter LASER close 11:21:45 Received message from Master: op=PointingHead serial=219749 11:21:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:21:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:21:46 Point started: ret=0 11:21:46 point_skyscan result=0 11:21:46 Check angles 11:21:46 SkyScan query 11:21:47 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.77<-21518 Statuses=0009 0009 11:21:47 Msec=0 True Az=136.38 Ze=-142.77 Az status=0009 Ze status=0009 11:21:47 Check angles 11:21:47 SkyScan query 11:21:48 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.815<-20121 Statuses=0009 0009 11:21:48 Msec=750 True Az=153.78 Ze=-121.815 Az status=0009 Ze status=0009 11:21:48 Check angles 11:21:48 SkyScan query 11:21:48 SkyScan query done: ret=0 az=171.345<-11423 ze=-100.83<-18722 Statuses=0009 0009 11:21:48 Msec=1500 True Az=171.345 Ze=-100.83 Az status=0009 Ze status=0009 11:21:49 Check angles 11:21:49 SkyScan query 11:21:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.935<-17329 Statuses=0008 0009 11:21:49 Msec=2250 True Az=175.995 Ze=-79.935 Az status=0008 Ze status=0009 11:21:49 Check angles 11:21:49 SkyScan query 11:21:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.95<-15930 Statuses=0008 0009 11:21:50 Msec=3000 True Az=175.995 Ze=-58.95 Az status=0008 Ze status=0009 11:21:50 Check angles 11:21:50 SkyScan query 11:21:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:21:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:21:51 Message to Master queued w/err=0: serial=219749 error=0 11:21:56 Received message from Master: op=Filter serial=219750 11:21:56 Color wheel filter change from 0 to 0 11:21:56 FLIGetFilterPos err=0 currentPosition=0 11:21:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:56 Filter is already there-color wheel unchanged 11:21:56 Received message from Master: op=Shutter serial=219751 11:21:56 Shutter LASER close 11:21:56 Received message from Camera: op=State serial=219753 11:21:56 GetSingleValue result=40 Value=cccccccc 11:21:56 SkyScan query 11:21:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:21:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:57 Parameters OK 11:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:57 Set A/D data flow result=40 11:21:57 Set A/D channel type result=40 11:21:57 Set A/D encoding result=40 11:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:57 Set channel filter=0.000000e+000 result=40 11:21:57 Config A/D Result=40 11:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:57 Get A/D filter: -9.255963e+061 result=40 11:21:57 Get A/D value=-858993460 result=40 11:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:57 Parameters OK 11:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:57 Set A/D data flow result=40 11:21:57 Set A/D channel type result=40 11:21:57 Set A/D encoding result=40 11:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:57 Set channel filter=0.000000e+000 result=40 11:21:57 Config A/D Result=40 11:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:57 Get A/D filter: -9.255963e+061 result=40 11:21:57 Get A/D value=-858993460 result=40 11:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:57 Aux= 11:21:57 Message to Camera, serial 219753 queued 11:22:33 Received message from Master: op=PointingHead serial=219766 11:22:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:22:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:22:34 Point started: ret=0 11:22:34 point_skyscan result=0 11:22:35 Check angles 11:22:35 SkyScan query 11:22:35 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.84<-13456 Statuses=0009 0009 11:22:35 Msec=0 True Az=152.955 Ze=-21.84 Az status=0009 Ze status=0009 11:22:35 Check angles 11:22:35 SkyScan query 11:22:36 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.825<-12055 Statuses=0009 0009 11:22:36 Msec=750 True Az=135.585 Ze=-0.825 Az status=0009 Ze status=0009 11:22:36 Check angles 11:22:36 SkyScan query 11:22:37 SkyScan query done: ret=0 az=117.6<-7840 ze=20.55<-10630 Statuses=0009 0009 11:22:37 Msec=1500 True Az=117.6 Ze=20.55 Az status=0009 Ze status=0009 11:22:37 Check angles 11:22:37 SkyScan query 11:22:37 SkyScan query done: ret=0 az=100.245<-6683 ze=41.535<-9231 Statuses=0009 0009 11:22:37 Msec=2250 True Az=100.245 Ze=41.535 Az status=0009 Ze status=0009 11:22:38 Check angles 11:22:38 SkyScan query 11:22:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 11:22:38 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 11:22:38 Check angles 11:22:38 SkyScan query 11:22:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 11:22:39 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 11:22:39 Message to Master queued w/err=0: serial=219766 error=0 11:22:44 Received message from Master: op=Filter serial=219767 11:22:44 Color wheel filter change from 0 to 0 11:22:44 FLIGetFilterPos err=0 currentPosition=0 11:22:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:44 Filter is already there-color wheel unchanged 11:22:44 Received message from Master: op=Shutter serial=219768 11:22:44 Shutter LASER close 11:22:44 Received message from Camera: op=State serial=219770 11:22:44 GetSingleValue result=40 Value=cccccccc 11:22:44 SkyScan query 11:22:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:22:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:45 Parameters OK 11:22:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:45 Set A/D data flow result=40 11:22:45 Set A/D channel type result=40 11:22:45 Set A/D encoding result=40 11:22:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:45 Set channel filter=0.000000e+000 result=40 11:22:45 Config A/D Result=40 11:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:45 Get A/D filter: -9.255963e+061 result=40 11:22:45 Get A/D value=-858993460 result=40 11:22:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:45 Parameters OK 11:22:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:45 Set A/D data flow result=40 11:22:45 Set A/D channel type result=40 11:22:45 Set A/D encoding result=40 11:22:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:45 Set channel filter=0.000000e+000 result=40 11:22:45 Config A/D Result=40 11:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:45 Get A/D filter: -9.255963e+061 result=40 11:22:45 Get A/D value=-858993460 result=40 11:22:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:45 Aux= 11:22:45 Message to Camera, serial 219770 queued 11:23:22 Received message from Master: op=PointingHead serial=219783 11:23:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:23:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:23:22 Point started: ret=0 11:23:22 point_skyscan result=0 11:23:23 Check angles 11:23:23 SkyScan query 11:23:23 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 11:23:23 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 11:23:23 Check angles 11:23:23 SkyScan query 11:23:24 SkyScan query done: ret=0 az=127.17<-8478 ze=38.505<-9433 Statuses=0009 0008 11:23:24 Msec=750 True Az=127.17 Ze=38.505 Az status=0009 Ze status=0008 11:23:24 Check angles 11:23:24 SkyScan query 11:23:25 SkyScan query done: ret=0 az=145.11<-9674 ze=38.505<-9433 Statuses=0009 0008 11:23:25 Msec=1500 True Az=145.11 Ze=38.505 Az status=0009 Ze status=0008 11:23:25 Check angles 11:23:25 SkyScan query 11:23:25 SkyScan query done: ret=0 az=162.48<-10832 ze=38.505<-9433 Statuses=0009 0008 11:23:25 Msec=2250 True Az=162.48 Ze=38.505 Az status=0009 Ze status=0008 11:23:26 Check angles 11:23:26 SkyScan query 11:23:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:23:26 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:23:26 Check angles 11:23:26 SkyScan query 11:23:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:23:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:23:27 Message to Master queued w/err=0: serial=219783 error=0 11:23:32 Received message from Master: op=Filter serial=219784 11:23:32 Color wheel filter change from 0 to 0 11:23:32 FLIGetFilterPos err=0 currentPosition=0 11:23:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:32 Filter is already there-color wheel unchanged 11:23:32 Received message from Master: op=Shutter serial=219785 11:23:32 Shutter LASER close 11:23:32 Received message from Camera: op=State serial=219787 11:23:32 GetSingleValue result=40 Value=cccccccc 11:23:32 SkyScan query 11:23:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:23:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:33 Parameters OK 11:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:33 Set A/D data flow result=40 11:23:33 Set A/D channel type result=40 11:23:33 Set A/D encoding result=40 11:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:33 Set channel filter=0.000000e+000 result=40 11:23:33 Config A/D Result=40 11:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:33 Get A/D filter: -9.255963e+061 result=40 11:23:33 Get A/D value=-858993460 result=40 11:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:33 Parameters OK 11:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:33 Set A/D data flow result=40 11:23:33 Set A/D channel type result=40 11:23:33 Set A/D encoding result=40 11:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:33 Set channel filter=0.000000e+000 result=40 11:23:33 Config A/D Result=40 11:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:33 Get A/D filter: -9.255963e+061 result=40 11:23:33 Get A/D value=-858993460 result=40 11:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:33 Aux= 11:23:33 Message to Camera, serial 219787 queued 11:24:10 Received message from Master: op=PointingHead serial=219800 11:24:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:24:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:24:10 Point started: ret=0 11:24:10 point_skyscan result=0 11:24:11 Check angles 11:24:11 SkyScan query 11:24:11 SkyScan query done: ret=0 az=152.655<-10177 ze=8.175<-11455 Statuses=0009 0009 11:24:11 Msec=0 True Az=152.655 Ze=8.175 Az status=0009 Ze status=0009 11:24:11 Check angles 11:24:11 SkyScan query 11:24:12 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.75<-12850 Statuses=0009 0009 11:24:12 Msec=750 True Az=135.135 Ze=-12.75 Az status=0009 Ze status=0009 11:24:12 Check angles 11:24:12 SkyScan query 11:24:13 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.735<-14249 Statuses=0009 0009 11:24:13 Msec=1500 True Az=117.615 Ze=-33.735 Az status=0009 Ze status=0009 11:24:13 Check angles 11:24:13 SkyScan query 11:24:14 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 11:24:14 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 11:24:14 Check angles 11:24:14 SkyScan query 11:24:14 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:24:14 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:24:14 Check angles 11:24:14 SkyScan query 11:24:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:24:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:24:15 Message to Master queued w/err=0: serial=219800 error=0 11:24:20 Received message from Master: op=Filter serial=219801 11:24:20 Color wheel filter change from 0 to 0 11:24:20 FLIGetFilterPos err=0 currentPosition=0 11:24:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:20 Filter is already there-color wheel unchanged 11:24:20 Received message from Master: op=Shutter serial=219802 11:24:20 Shutter LASER close 11:24:20 Received message from Camera: op=State serial=219804 11:24:20 GetSingleValue result=40 Value=cccccccc 11:24:20 SkyScan query 11:24:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:24:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:21 Parameters OK 11:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:21 Set A/D data flow result=40 11:24:21 Set A/D channel type result=40 11:24:21 Set A/D encoding result=40 11:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:21 Set channel filter=0.000000e+000 result=40 11:24:21 Config A/D Result=40 11:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:21 Get A/D filter: -9.255963e+061 result=40 11:24:21 Get A/D value=-858993460 result=40 11:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:21 Parameters OK 11:24:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:21 Set A/D data flow result=40 11:24:21 Set A/D channel type result=40 11:24:21 Set A/D encoding result=40 11:24:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:21 Set channel filter=0.000000e+000 result=40 11:24:21 Config A/D Result=40 11:24:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:21 Get A/D filter: -9.255963e+061 result=40 11:24:21 Get A/D value=-858993460 result=40 11:24:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:21 Aux= 11:24:21 Message to Camera, serial 219804 queued 11:24:58 Received message from Master: op=PointingHead serial=219817 11:24:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:24:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:24:58 Point started: ret=0 11:24:58 point_skyscan result=0 11:24:59 Check angles 11:24:59 SkyScan query 11:24:59 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.135<-17409 Statuses=0009 0009 11:24:59 Msec=0 True Az=109.14 Ze=-81.135 Az status=0009 Ze status=0009 11:25:00 Check angles 11:25:00 SkyScan query 11:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 11:25:00 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 11:25:00 Check angles 11:25:00 SkyScan query 11:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.075<-20205 Statuses=0008 0009 11:25:01 Msec=1500 True Az=112.995 Ze=-123.075 Az status=0008 Ze status=0009 11:25:01 Check angles 11:25:01 SkyScan query 11:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 11:25:02 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 11:25:02 Check angles 11:25:02 SkyScan query 11:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.985<-22999 Statuses=0008 0009 11:25:02 Msec=3000 True Az=112.995 Ze=-164.985 Az status=0008 Ze status=0009 11:25:03 Check angles 11:25:03 SkyScan query 11:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:25:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:25:03 Message to Master queued w/err=0: serial=219817 error=0 11:25:08 Received message from Master: op=Filter serial=219818 11:25:08 Color wheel filter change from 0 to 0 11:25:08 FLIGetFilterPos err=0 currentPosition=0 11:25:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:08 Filter is already there-color wheel unchanged 11:25:08 Received message from Master: op=Shutter serial=219819 11:25:08 Shutter LASER open 11:25:08 Received message from Camera: op=State serial=219821 11:25:08 GetSingleValue result=40 Value=cccccccc 11:25:08 SkyScan query 11:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:25:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:09 Parameters OK 11:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:09 Set A/D data flow result=40 11:25:09 Set A/D channel type result=40 11:25:09 Set A/D encoding result=40 11:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:09 Set channel filter=0.000000e+000 result=40 11:25:09 Config A/D Result=40 11:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:09 Get A/D filter: -9.255963e+061 result=40 11:25:09 Get A/D value=-858993460 result=40 11:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:09 Parameters OK 11:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:09 Set A/D data flow result=40 11:25:09 Set A/D channel type result=40 11:25:09 Set A/D encoding result=40 11:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:09 Set channel filter=0.000000e+000 result=40 11:25:09 Config A/D Result=40 11:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:09 Get A/D filter: -9.255963e+061 result=40 11:25:09 Get A/D value=-858993460 result=40 11:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:09 Aux= 11:25:09 Message to Camera, serial 219821 queued 11:25:17 Received message from Master: op=Shutter serial=219831 11:25:17 Shutter LASER close 11:25:18 Received message from Master: op=PointingHead serial=219835 11:25:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:25:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:25:18 Point started: ret=0 11:25:18 point_skyscan result=0 11:25:19 Check angles 11:25:19 SkyScan query 11:25:20 SkyScan query done: ret=0 az=90.18<-6012 ze=157.485<-1501 Statuses=0009 0009 11:25:20 Msec=0 True Az=90.18 Ze=157.485 Az status=0009 Ze status=0009 11:25:20 Check angles 11:25:20 SkyScan query 11:25:20 SkyScan query done: ret=0 az=72.69<-4846 ze=136.5<-2900 Statuses=0009 0009 11:25:20 Msec=750 True Az=72.69 Ze=136.5 Az status=0009 Ze status=0009 11:25:20 Check angles 11:25:20 SkyScan query 11:25:21 SkyScan query done: ret=0 az=55.32<-3688 ze=115.59<-4294 Statuses=0009 0009 11:25:21 Msec=1500 True Az=55.32 Ze=115.59 Az status=0009 Ze status=0009 11:25:21 Check angles 11:25:21 SkyScan query 11:25:22 SkyScan query done: ret=0 az=40.98<-2732 ze=94.605<-5693 Statuses=0009 0009 11:25:22 Msec=2250 True Az=40.98 Ze=94.605 Az status=0009 Ze status=0009 11:25:22 Check angles 11:25:22 SkyScan query 11:25:23 SkyScan query done: ret=0 az=40.995<-2733 ze=73.68<-7088 Statuses=0008 0009 11:25:23 Msec=3000 True Az=40.995 Ze=73.68 Az status=0008 Ze status=0009 11:25:23 Check angles 11:25:23 SkyScan query 11:25:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.995<-8467 Statuses=0008 0009 11:25:23 Msec=3750 True Az=40.995 Ze=52.995 Az status=0008 Ze status=0009 11:25:23 Check angles 11:25:23 SkyScan query 11:25:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:25:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:25:24 Message to Master queued w/err=0: serial=219835 error=0 11:25:29 Received message from Master: op=Filter serial=219836 11:25:29 Color wheel filter change from 0 to 0 11:25:29 FLIGetFilterPos err=0 currentPosition=0 11:25:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:29 Filter is already there-color wheel unchanged 11:25:29 Received message from Master: op=Shutter serial=219837 11:25:29 Shutter LASER close 11:25:29 Received message from Camera: op=State serial=219839 11:25:29 GetSingleValue result=40 Value=cccccccc 11:25:29 SkyScan query 11:25:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:25:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:30 Parameters OK 11:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:30 Set A/D data flow result=40 11:25:30 Set A/D channel type result=40 11:25:30 Set A/D encoding result=40 11:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:30 Set channel filter=0.000000e+000 result=40 11:25:30 Config A/D Result=40 11:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:30 Get A/D filter: -9.255963e+061 result=40 11:25:30 Get A/D value=-858993460 result=40 11:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:30 Parameters OK 11:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:30 Set A/D data flow result=40 11:25:30 Set A/D channel type result=40 11:25:30 Set A/D encoding result=40 11:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:30 Set channel filter=0.000000e+000 result=40 11:25:30 Config A/D Result=40 11:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:30 Get A/D filter: -9.255963e+061 result=40 11:25:30 Get A/D value=-858993460 result=40 11:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:30 Aux= [UTC 2018-12-17 11:25:30] 11:25:30 Message to Camera, serial 219839 queued 11:26:07 Received message from Master: op=PointingHead serial=219852 11:26:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:26:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:26:07 Point started: ret=0 11:26:07 point_skyscan result=0 11:26:08 Check angles 11:26:08 SkyScan query 11:26:08 SkyScan query done: ret=0 az=64.26<-4284 ze=66.54<-7564 Statuses=0009 0008 11:26:08 Msec=0 True Az=64.26 Ze=66.54 Az status=0009 Ze status=0008 11:26:09 Check angles 11:26:09 SkyScan query 11:26:09 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 11:26:09 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 11:26:09 Check angles 11:26:09 SkyScan query 11:26:10 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 11:26:10 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 11:26:10 Check angles 11:26:10 SkyScan query 11:26:11 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 11:26:11 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 11:26:11 Check angles 11:26:11 SkyScan query 11:26:12 SkyScan query done: ret=0 az=134.61<-8974 ze=66.495<-7567 Statuses=0009 0008 11:26:12 Msec=3000 True Az=134.61 Ze=66.495 Az status=0009 Ze status=0008 11:26:12 Check angles 11:26:12 SkyScan query 11:26:12 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 11:26:12 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 11:26:12 Check angles 11:26:12 SkyScan query 11:26:13 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:26:13 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:26:13 Message to Master queued w/err=0: serial=219852 error=0 11:26:18 Received message from Master: op=Filter serial=219853 11:26:18 Color wheel filter change from 0 to 0 11:26:18 FLIGetFilterPos err=0 currentPosition=0 11:26:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:18 Filter is already there-color wheel unchanged 11:26:18 Received message from Master: op=Shutter serial=219854 11:26:18 Shutter LASER close 11:26:18 Received message from Camera: op=State serial=219856 11:26:18 GetSingleValue result=40 Value=cccccccc 11:26:18 SkyScan query 11:26:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:19 Parameters OK 11:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:19 Set A/D data flow result=40 11:26:19 Set A/D channel type result=40 11:26:19 Set A/D encoding result=40 11:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:19 Set channel filter=0.000000e+000 result=40 11:26:19 Config A/D Result=40 11:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:19 Get A/D filter: -9.255963e+061 result=40 11:26:19 Get A/D value=-858993460 result=40 11:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:19 Parameters OK 11:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:19 Set A/D data flow result=40 11:26:19 Set A/D channel type result=40 11:26:19 Set A/D encoding result=40 11:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:19 Set channel filter=0.000000e+000 result=40 11:26:19 Config A/D Result=40 11:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:19 Get A/D filter: -9.255963e+061 result=40 11:26:19 Get A/D value=-858993460 result=40 11:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:19 Aux= 11:26:19 Message to Camera, serial 219856 queued 11:26:56 Received message from Master: op=PointingHead serial=219869 11:26:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:26:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:26:56 Point started: ret=0 11:26:56 point_skyscan result=0 11:26:57 Check angles 11:26:57 SkyScan query 11:26:57 SkyScan query done: ret=0 az=135.045<-9003 ze=36.825<-9545 Statuses=0009 0009 11:26:57 Msec=0 True Az=135.045 Ze=36.825 Az status=0009 Ze status=0009 11:26:57 Check angles 11:26:57 SkyScan query 11:26:58 SkyScan query done: ret=0 az=117.51<-7834 ze=15.855<-10943 Statuses=0009 0009 11:26:58 Msec=750 True Az=117.51 Ze=15.855 Az status=0009 Ze status=0009 11:26:58 Check angles 11:26:58 SkyScan query 11:26:59 SkyScan query done: ret=0 az=100.23<-6682 ze=-5.115<-12341 Statuses=0009 0009 11:26:59 Msec=1500 True Az=100.23 Ze=-5.115 Az status=0009 Ze status=0009 11:26:59 Check angles 11:26:59 SkyScan query 11:27:00 SkyScan query done: ret=0 az=82.635<-5509 ze=-26.055<-13737 Statuses=0009 0009 11:27:00 Msec=2250 True Az=82.635 Ze=-26.055 Az status=0009 Ze status=0009 11:27:00 Check angles 11:27:00 SkyScan query 11:27:00 SkyScan query done: ret=0 az=65.235<-4349 ze=-38.58<-14572 Statuses=0009 0008 11:27:00 Msec=3000 True Az=65.235 Ze=-38.58 Az status=0009 Ze status=0008 11:27:00 Check angles 11:27:00 SkyScan query 11:27:01 SkyScan query done: ret=0 az=47.4<-3160 ze=-38.52<-14568 Statuses=0009 0008 11:27:01 Msec=3750 True Az=47.4 Ze=-38.52 Az status=0009 Ze status=0008 11:27:01 Check angles 11:27:01 SkyScan query 11:27:02 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 11:27:02 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 11:27:02 Message to Master queued w/err=0: serial=219869 error=0 11:27:07 Received message from Master: op=Filter serial=219870 11:27:07 Color wheel filter change from 0 to 0 11:27:07 FLIGetFilterPos err=0 currentPosition=0 11:27:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:07 Filter is already there-color wheel unchanged 11:27:07 Received message from Master: op=Shutter serial=219871 11:27:07 Shutter LASER close 11:27:07 Received message from Camera: op=State serial=219873 11:27:07 GetSingleValue result=40 Value=cccccccc 11:27:07 SkyScan query 11:27:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:27:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:08 Parameters OK 11:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:08 Set A/D data flow result=40 11:27:08 Set A/D channel type result=40 11:27:08 Set A/D encoding result=40 11:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:08 Set channel filter=0.000000e+000 result=40 11:27:08 Config A/D Result=40 11:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:08 Get A/D filter: -9.255963e+061 result=40 11:27:08 Get A/D value=-858993460 result=40 11:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:08 Parameters OK 11:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:08 Set A/D data flow result=40 11:27:08 Set A/D channel type result=40 11:27:08 Set A/D encoding result=40 11:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:08 Set channel filter=0.000000e+000 result=40 11:27:08 Config A/D Result=40 11:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:08 Get A/D filter: -9.255963e+061 result=40 11:27:08 Get A/D value=-858993460 result=40 11:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:08 Aux= 11:27:08 Message to Camera, serial 219873 queued 11:27:44 Received message from Master: op=PointingHead serial=219885 11:27:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:27:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:27:44 Point started: ret=0 11:27:44 point_skyscan result=0 11:27:45 Check angles 11:27:45 SkyScan query 11:27:45 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.01<-16534 Statuses=0009 0009 11:27:45 Msec=0 True Az=63.81 Ze=-68.01 Az status=0009 Ze status=0009 11:27:45 Check angles 11:27:45 SkyScan query 11:27:46 SkyScan query done: ret=0 az=81.105<-5407 ze=-89.01<-17934 Statuses=0009 0009 11:27:46 Msec=750 True Az=81.105 Ze=-89.01 Az status=0009 Ze status=0009 11:27:46 Check angles 11:27:46 SkyScan query 11:27:47 SkyScan query done: ret=0 az=98.685<-6579 ze=-109.92<-19328 Statuses=0009 0009 11:27:47 Msec=1500 True Az=98.685 Ze=-109.92 Az status=0009 Ze status=0009 11:27:47 Check angles 11:27:47 SkyScan query 11:27:48 SkyScan query done: ret=0 az=116.175<-7745 ze=-130.92<-20728 Statuses=0009 0009 11:27:48 Msec=2250 True Az=116.175 Ze=-130.92 Az status=0009 Ze status=0009 11:27:48 Check angles 11:27:48 SkyScan query 11:27:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 11:27:48 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 11:27:48 Check angles 11:27:48 SkyScan query 11:27:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:27:49 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:27:49 Message to Master queued w/err=0: serial=219885 error=0 11:27:54 Received message from Master: op=Filter serial=219886 11:27:54 Color wheel filter change from 0 to 0 11:27:54 FLIGetFilterPos err=0 currentPosition=0 11:27:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:54 Filter is already there-color wheel unchanged 11:27:54 Received message from Master: op=Shutter serial=219887 11:27:54 Shutter LASER close 11:27:54 Received message from Camera: op=State serial=219889 11:27:54 GetSingleValue result=40 Value=cccccccc 11:27:54 SkyScan query 11:27:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:27:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:55 Parameters OK 11:27:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:55 Set A/D data flow result=40 11:27:55 Set A/D channel type result=40 11:27:55 Set A/D encoding result=40 11:27:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:55 Set channel filter=0.000000e+000 result=40 11:27:55 Config A/D Result=40 11:27:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:55 Get A/D filter: -9.255963e+061 result=40 11:27:55 Get A/D value=-858993460 result=40 11:27:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:55 Parameters OK 11:27:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:55 Set A/D data flow result=40 11:27:55 Set A/D channel type result=40 11:27:55 Set A/D encoding result=40 11:27:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:55 Set channel filter=0.000000e+000 result=40 11:27:55 Config A/D Result=40 11:27:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:55 Get A/D filter: -9.255963e+061 result=40 11:27:55 Get A/D value=-858993460 result=40 11:27:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:55 Aux= 11:27:55 Message to Camera, serial 219889 queued 11:28:32 Received message from Master: op=PointingHead serial=219902 11:28:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:28:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:28:32 Point started: ret=0 11:28:32 point_skyscan result=0 11:28:33 Check angles 11:28:33 SkyScan query 11:28:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 11:28:33 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 11:28:34 Check angles 11:28:34 SkyScan query 11:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:28:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:28:34 Message to Master queued w/err=0: serial=219902 error=0 11:28:39 Received message from Master: op=Filter serial=219903 11:28:39 Color wheel filter change from 0 to 0 11:28:39 FLIGetFilterPos err=0 currentPosition=0 11:28:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:39 Filter is already there-color wheel unchanged 11:28:39 Received message from Master: op=Shutter serial=219904 11:28:39 Shutter LASER open 11:28:39 Received message from Camera: op=State serial=219906 11:28:39 GetSingleValue result=40 Value=cccccccc 11:28:39 SkyScan query 11:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:28:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:40 Parameters OK 11:28:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:40 Set A/D data flow result=40 11:28:40 Set A/D channel type result=40 11:28:40 Set A/D encoding result=40 11:28:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:40 Set channel filter=0.000000e+000 result=40 11:28:40 Config A/D Result=40 11:28:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:40 Get A/D filter: -9.255963e+061 result=40 11:28:40 Get A/D value=-858993460 result=40 11:28:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:40 Parameters OK 11:28:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:40 Set A/D data flow result=40 11:28:40 Set A/D channel type result=40 11:28:40 Set A/D encoding result=40 11:28:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:40 Set channel filter=0.000000e+000 result=40 11:28:40 Config A/D Result=40 11:28:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:40 Get A/D filter: -9.255963e+061 result=40 11:28:40 Get A/D value=-858993460 result=40 11:28:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:40 Aux= 11:28:40 Message to Camera, serial 219906 queued 11:28:48 Received message from Master: op=Shutter serial=219916 11:28:48 Shutter LASER close 11:28:49 Received message from Master: op=PointingHead serial=219920 11:28:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:28:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:28:49 Point started: ret=0 11:28:49 point_skyscan result=0 11:28:50 Check angles 11:28:50 SkyScan query 11:28:51 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.445<-21563 Statuses=0009 0009 11:28:51 Msec=0 True Az=135.825 Ze=-143.445 Az status=0009 Ze status=0009 11:28:51 Check angles 11:28:51 SkyScan query 11:28:51 SkyScan query done: ret=0 az=153.72<-10248 ze=-122.01<-20134 Statuses=0009 0009 11:28:51 Msec=750 True Az=153.72 Ze=-122.01 Az status=0009 Ze status=0009 11:28:52 Check angles 11:28:52 SkyScan query 11:28:52 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.56<-18704 Statuses=0009 0009 11:28:52 Msec=1500 True Az=171.525 Ze=-100.56 Az status=0009 Ze status=0009 11:28:52 Check angles 11:28:52 SkyScan query 11:28:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.68<-17312 Statuses=0008 0009 11:28:53 Msec=2250 True Az=176.01 Ze=-79.68 Az status=0008 Ze status=0009 11:28:53 Check angles 11:28:53 SkyScan query 11:28:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 11:28:54 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 11:28:54 Check angles 11:28:54 SkyScan query 11:28:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:28:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:28:54 Message to Master queued w/err=0: serial=219920 error=0 11:28:59 Received message from Master: op=Filter serial=219921 11:28:59 Color wheel filter change from 0 to 0 11:28:59 FLIGetFilterPos err=0 currentPosition=0 11:28:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:59 Filter is already there-color wheel unchanged 11:29:00 Received message from Master: op=Shutter serial=219922 11:29:00 Shutter LASER close 11:29:00 Received message from Camera: op=State serial=219924 11:29:00 GetSingleValue result=40 Value=cccccccc 11:29:00 SkyScan query 11:29:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:29:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:00 Parameters OK 11:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:00 Set A/D data flow result=40 11:29:00 Set A/D channel type result=40 11:29:00 Set A/D encoding result=40 11:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:00 Set channel filter=0.000000e+000 result=40 11:29:00 Config A/D Result=40 11:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:00 Get A/D filter: -9.255963e+061 result=40 11:29:00 Get A/D value=-858993460 result=40 11:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:00 Parameters OK 11:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:00 Set A/D data flow result=40 11:29:00 Set A/D channel type result=40 11:29:00 Set A/D encoding result=40 11:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:00 Set channel filter=0.000000e+000 result=40 11:29:00 Config A/D Result=40 11:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:00 Get A/D filter: -9.255963e+061 result=40 11:29:00 Get A/D value=-858993460 result=40 11:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:00 Aux= 11:29:00 Message to Camera, serial 219924 queued 11:29:37 Received message from Master: op=PointingHead serial=219937 11:29:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:29:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:29:38 Point started: ret=0 11:29:38 point_skyscan result=0 11:29:38 Check angles 11:29:38 SkyScan query 11:29:39 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.915<-13461 Statuses=0009 0009 11:29:39 Msec=0 True Az=153.075 Ze=-21.915 Az status=0009 Ze status=0009 11:29:39 Check angles 11:29:39 SkyScan query 11:29:40 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.9<-12060 Statuses=0009 0009 11:29:40 Msec=750 True Az=135.705 Ze=-0.9 Az status=0009 Ze status=0009 11:29:40 Check angles 11:29:40 SkyScan query 11:29:40 SkyScan query done: ret=0 az=118.05<-7870 ze=19.995<-10667 Statuses=0009 0009 11:29:40 Msec=1500 True Az=118.05 Ze=19.995 Az status=0009 Ze status=0009 11:29:41 Check angles 11:29:41 SkyScan query 11:29:41 SkyScan query done: ret=0 az=100.74<-6716 ze=41.025<-9265 Statuses=0009 0009 11:29:41 Msec=2250 True Az=100.74 Ze=41.025 Az status=0009 Ze status=0009 11:29:41 Check angles 11:29:41 SkyScan query 11:29:42 SkyScan query done: ret=0 az=85.95<-5730 ze=51.555<-8563 Statuses=0009 0008 11:29:42 Msec=3000 True Az=85.95 Ze=51.555 Az status=0009 Ze status=0008 11:29:42 Check angles 11:29:42 SkyScan query 11:29:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:29:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:29:43 Message to Master queued w/err=0: serial=219937 error=0 11:29:48 Received message from Master: op=Filter serial=219938 11:29:48 Color wheel filter change from 0 to 0 11:29:48 FLIGetFilterPos err=0 currentPosition=0 11:29:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:48 Filter is already there-color wheel unchanged 11:29:48 Received message from Master: op=Shutter serial=219939 11:29:48 Shutter LASER close 11:29:48 Received message from Camera: op=State serial=219941 11:29:48 GetSingleValue result=40 Value=cccccccc 11:29:48 SkyScan query 11:29:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:29:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:48 Parameters OK 11:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:48 Set A/D data flow result=40 11:29:48 Set A/D channel type result=40 11:29:48 Set A/D encoding result=40 11:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:48 Set channel filter=0.000000e+000 result=40 11:29:48 Config A/D Result=40 11:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:48 Get A/D filter: -9.255963e+061 result=40 11:29:48 Get A/D value=-858993460 result=40 11:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:48 Parameters OK 11:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:48 Set A/D data flow result=40 11:29:48 Set A/D channel type result=40 11:29:48 Set A/D encoding result=40 11:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:48 Set channel filter=0.000000e+000 result=40 11:29:48 Config A/D Result=40 11:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:48 Get A/D filter: -9.255963e+061 result=40 11:29:48 Get A/D value=-858993460 result=40 11:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:48 Aux= 11:29:48 Message to Camera, serial 219941 queued 11:30:25 Received message from Master: op=PointingHead serial=219954 11:30:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:30:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:30:26 Point started: ret=0 11:30:26 point_skyscan result=0 11:30:26 Check angles 11:30:26 SkyScan query 11:30:27 SkyScan query done: ret=0 az=109.14<-7276 ze=38.475<-9435 Statuses=0009 0008 11:30:27 Msec=0 True Az=109.14 Ze=38.475 Az status=0009 Ze status=0008 11:30:27 Check angles 11:30:27 SkyScan query 11:30:28 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 11:30:28 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 11:30:28 Check angles 11:30:28 SkyScan query 11:30:28 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 11:30:28 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 11:30:29 Check angles 11:30:29 SkyScan query 11:30:29 SkyScan query done: ret=0 az=161.37<-10758 ze=38.505<-9433 Statuses=0009 0008 11:30:29 Msec=2250 True Az=161.37 Ze=38.505 Az status=0009 Ze status=0008 11:30:29 Check angles 11:30:29 SkyScan query 11:30:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:30:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:30:30 Check angles 11:30:30 SkyScan query 11:30:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:30:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:30:31 Message to Master queued w/err=0: serial=219954 error=0 11:30:36 Received message from Master: op=Filter serial=219955 11:30:36 Color wheel filter change from 0 to 0 11:30:36 FLIGetFilterPos err=0 currentPosition=0 11:30:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:36 Filter is already there-color wheel unchanged 11:30:36 Received message from Master: op=Shutter serial=219956 11:30:36 Shutter LASER close 11:30:36 Received message from Camera: op=State serial=219958 11:30:36 GetSingleValue result=40 Value=cccccccc 11:30:36 SkyScan query 11:30:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:30:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:36 Parameters OK 11:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:36 Set A/D data flow result=40 11:30:36 Set A/D channel type result=40 11:30:36 Set A/D encoding result=40 11:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:36 Set channel filter=0.000000e+000 result=40 11:30:36 Config A/D Result=40 11:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:36 Get A/D filter: -9.255963e+061 result=40 11:30:36 Get A/D value=-858993460 result=40 11:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:36 Parameters OK 11:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:36 Set A/D data flow result=40 11:30:36 Set A/D channel type result=40 11:30:36 Set A/D encoding result=40 11:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:36 Set channel filter=0.000000e+000 result=40 11:30:36 Config A/D Result=40 11:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:36 Get A/D filter: -9.255963e+061 result=40 11:30:36 Get A/D value=-858993460 result=40 11:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:36 Aux= 11:30:36 Message to Camera, serial 219958 queued 11:31:13 Received message from Master: op=PointingHead serial=219971 11:31:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:31:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:31:14 Point started: ret=0 11:31:14 point_skyscan result=0 11:31:14 Check angles 11:31:14 SkyScan query 11:31:15 SkyScan query done: ret=0 az=153.21<-10214 ze=8.985<-11401 Statuses=0009 0009 11:31:15 Msec=0 True Az=153.21 Ze=8.985 Az status=0009 Ze status=0009 11:31:15 Check angles 11:31:15 SkyScan query 11:31:16 SkyScan query done: ret=0 az=135.795<-9053 ze=-12.03<-12802 Statuses=0009 0009 11:31:16 Msec=750 True Az=135.795 Ze=-12.03 Az status=0009 Ze status=0009 11:31:16 Check angles 11:31:16 SkyScan query 11:31:17 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.375<-14225 Statuses=0009 0009 11:31:17 Msec=1500 True Az=117.795 Ze=-33.375 Az status=0009 Ze status=0009 11:31:17 Check angles 11:31:17 SkyScan query 11:31:17 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 11:31:17 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 11:31:17 Check angles 11:31:17 SkyScan query 11:31:18 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:31:18 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:31:18 Check angles 11:31:18 SkyScan query 11:31:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:31:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:31:19 Message to Master queued w/err=0: serial=219971 error=0 11:31:24 Received message from Master: op=Filter serial=219972 11:31:24 Color wheel filter change from 0 to 0 11:31:24 FLIGetFilterPos err=0 currentPosition=0 11:31:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:24 Filter is already there-color wheel unchanged 11:31:24 Received message from Master: op=Shutter serial=219973 11:31:24 Shutter LASER close 11:31:24 Received message from Camera: op=State serial=219975 11:31:24 GetSingleValue result=40 Value=cccccccc 11:31:24 SkyScan query 11:31:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:31:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:25 Parameters OK 11:31:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:25 Set A/D data flow result=40 11:31:25 Set A/D channel type result=40 11:31:25 Set A/D encoding result=40 11:31:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:25 Set channel filter=0.000000e+000 result=40 11:31:25 Config A/D Result=40 11:31:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:25 Get A/D filter: -9.255963e+061 result=40 11:31:25 Get A/D value=-858993460 result=40 11:31:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:25 Parameters OK 11:31:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:25 Set A/D data flow result=40 11:31:25 Set A/D channel type result=40 11:31:25 Set A/D encoding result=40 11:31:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:25 Set channel filter=0.000000e+000 result=40 11:31:25 Config A/D Result=40 11:31:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:25 Get A/D filter: -9.255963e+061 result=40 11:31:25 Get A/D value=-858993460 result=40 11:31:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:25 Aux= 11:31:25 Message to Camera, serial 219975 queued 11:32:01 Received message from Master: op=PointingHead serial=219988 11:32:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:32:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:32:02 Point started: ret=0 11:32:02 point_skyscan result=0 11:32:02 Check angles 11:32:02 SkyScan query 11:32:03 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.18<-17412 Statuses=0009 0009 11:32:03 Msec=0 True Az=108.93 Ze=-81.18 Az status=0009 Ze status=0009 11:32:03 Check angles 11:32:03 SkyScan query 11:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.585<-18839 Statuses=0008 0009 11:32:04 Msec=750 True Az=112.995 Ze=-102.585 Az status=0008 Ze status=0009 11:32:04 Check angles 11:32:04 SkyScan query 11:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.975<-20265 Statuses=0008 0009 11:32:05 Msec=1500 True Az=112.995 Ze=-123.975 Az status=0008 Ze status=0009 11:32:05 Check angles 11:32:05 SkyScan query 11:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.365<-21691 Statuses=0008 0009 11:32:05 Msec=2250 True Az=112.995 Ze=-145.365 Az status=0008 Ze status=0009 11:32:06 Check angles 11:32:06 SkyScan query 11:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.29<-23086 Statuses=0008 0009 11:32:06 Msec=3000 True Az=112.995 Ze=-166.29 Az status=0008 Ze status=0009 11:32:06 Check angles 11:32:06 SkyScan query 11:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:32:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:32:07 Message to Master queued w/err=0: serial=219988 error=0 11:32:12 Received message from Master: op=Filter serial=219989 11:32:12 Color wheel filter change from 0 to 0 11:32:12 FLIGetFilterPos err=0 currentPosition=0 11:32:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:12 Filter is already there-color wheel unchanged 11:32:12 Received message from Master: op=Shutter serial=219990 11:32:12 Shutter LASER open 11:32:12 Received message from Camera: op=State serial=219992 11:32:12 GetSingleValue result=40 Value=cccccccc 11:32:12 SkyScan query 11:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:32:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:13 Parameters OK 11:32:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:13 Set A/D data flow result=40 11:32:13 Set A/D channel type result=40 11:32:13 Set A/D encoding result=40 11:32:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:13 Set channel filter=0.000000e+000 result=40 11:32:13 Config A/D Result=40 11:32:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:13 Get A/D filter: -9.255963e+061 result=40 11:32:13 Get A/D value=-858993460 result=40 11:32:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:13 Parameters OK 11:32:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:13 Set A/D data flow result=40 11:32:13 Set A/D channel type result=40 11:32:13 Set A/D encoding result=40 11:32:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:13 Set channel filter=0.000000e+000 result=40 11:32:13 Config A/D Result=40 11:32:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:13 Get A/D filter: -9.255963e+061 result=40 11:32:13 Get A/D value=-858993460 result=40 11:32:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:13 Aux= 11:32:13 Message to Camera, serial 219992 queued 11:32:20 Received message from Master: op=Shutter serial=220001 11:32:20 Shutter LASER close 11:32:21 Received message from Master: op=PointingHead serial=220005 11:32:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:32:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:32:21 Point started: ret=0 11:32:21 point_skyscan result=0 11:32:22 Check angles 11:32:22 SkyScan query 11:32:22 SkyScan query done: ret=0 az=89.61<-5974 ze=156.885<-1541 Statuses=0009 0009 11:32:22 Msec=0 True Az=89.61 Ze=156.885 Az status=0009 Ze status=0009 11:32:23 Check angles 11:32:23 SkyScan query 11:32:23 SkyScan query done: ret=0 az=71.595<-4773 ze=135.51<-2966 Statuses=0009 0009 11:32:23 Msec=750 True Az=71.595 Ze=135.51 Az status=0009 Ze status=0009 11:32:23 Check angles 11:32:23 SkyScan query 11:32:24 SkyScan query done: ret=0 az=54.36<-3624 ze=114.495<-4367 Statuses=0009 0009 11:32:24 Msec=1500 True Az=54.36 Ze=114.495 Az status=0009 Ze status=0009 11:32:24 Check angles 11:32:24 SkyScan query 11:32:25 SkyScan query done: ret=0 az=41.025<-2735 ze=93.615<-5759 Statuses=0009 0009 11:32:25 Msec=2250 True Az=41.025 Ze=93.615 Az status=0009 Ze status=0009 11:32:25 Check angles 11:32:25 SkyScan query 11:32:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 11:32:25 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 11:32:26 Check angles 11:32:26 SkyScan query 11:32:26 SkyScan query done: ret=0 az=40.98<-2732 ze=52.365<-8509 Statuses=0008 0009 11:32:26 Msec=3750 True Az=40.98 Ze=52.365 Az status=0008 Ze status=0009 11:32:26 Check angles 11:32:26 SkyScan query 11:32:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:32:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:32:27 Message to Master queued w/err=0: serial=220005 error=0 11:32:32 Received message from Master: op=Filter serial=220006 11:32:32 Color wheel filter change from 0 to 0 11:32:32 FLIGetFilterPos err=0 currentPosition=0 11:32:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:32 Filter is already there-color wheel unchanged 11:32:32 Received message from Master: op=Shutter serial=220007 11:32:32 Shutter LASER close 11:32:32 Received message from Camera: op=State serial=220009 11:32:32 GetSingleValue result=40 Value=cccccccc 11:32:32 SkyScan query 11:32:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:32:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:33 Parameters OK 11:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:33 Set A/D data flow result=40 11:32:33 Set A/D channel type result=40 11:32:33 Set A/D encoding result=40 11:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:33 Set channel filter=0.000000e+000 result=40 11:32:33 Config A/D Result=40 11:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:33 Get A/D filter: -9.255963e+061 result=40 11:32:33 Get A/D value=-858993460 result=40 11:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:33 Parameters OK 11:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:33 Set A/D data flow result=40 11:32:33 Set A/D channel type result=40 11:32:33 Set A/D encoding result=40 11:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:33 Set channel filter=0.000000e+000 result=40 11:32:33 Config A/D Result=40 11:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:33 Get A/D filter: -9.255963e+061 result=40 11:32:33 Get A/D value=-858993460 result=40 11:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:33 Aux= 11:32:33 Message to Camera, serial 220009 queued 11:33:10 Received message from Master: op=PointingHead serial=220022 11:33:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:33:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:33:10 Point started: ret=0 11:33:10 point_skyscan result=0 11:33:11 Check angles 11:33:11 SkyScan query 11:33:11 SkyScan query done: ret=0 az=64.41<-4294 ze=66.54<-7564 Statuses=0009 0008 11:33:11 Msec=0 True Az=64.41 Ze=66.54 Az status=0009 Ze status=0008 11:33:12 Check angles 11:33:12 SkyScan query 11:33:12 SkyScan query done: ret=0 az=81.495<-5433 ze=66.495<-7567 Statuses=0009 0008 11:33:12 Msec=750 True Az=81.495 Ze=66.495 Az status=0009 Ze status=0008 11:33:12 Check angles 11:33:12 SkyScan query 11:33:13 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 11:33:13 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 11:33:13 Check angles 11:33:13 SkyScan query 11:33:14 SkyScan query done: ret=0 az=117.045<-7803 ze=66.495<-7567 Statuses=0009 0008 11:33:14 Msec=2250 True Az=117.045 Ze=66.495 Az status=0009 Ze status=0008 11:33:14 Check angles 11:33:14 SkyScan query 11:33:14 SkyScan query done: ret=0 az=134.565<-8971 ze=66.495<-7567 Statuses=0009 0008 11:33:14 Msec=3000 True Az=134.565 Ze=66.495 Az status=0009 Ze status=0008 11:33:15 Check angles 11:33:15 SkyScan query 11:33:15 SkyScan query done: ret=0 az=152.205<-10147 ze=66.495<-7567 Statuses=0009 0008 11:33:15 Msec=3750 True Az=152.205 Ze=66.495 Az status=0009 Ze status=0008 11:33:15 Check angles 11:33:15 SkyScan query 11:33:16 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:33:16 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:33:16 Message to Master queued w/err=0: serial=220022 error=0 11:33:21 Received message from Master: op=Filter serial=220023 11:33:21 Color wheel filter change from 0 to 0 11:33:21 FLIGetFilterPos err=0 currentPosition=0 11:33:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:21 Filter is already there-color wheel unchanged 11:33:21 Received message from Master: op=Shutter serial=220024 11:33:21 Shutter LASER close 11:33:21 Received message from Camera: op=State serial=220026 11:33:21 GetSingleValue result=40 Value=cccccccc 11:33:21 SkyScan query 11:33:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:33:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:22 Parameters OK 11:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:22 Set A/D data flow result=40 11:33:22 Set A/D channel type result=40 11:33:22 Set A/D encoding result=40 11:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:22 Set channel filter=0.000000e+000 result=40 11:33:22 Config A/D Result=40 11:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:22 Get A/D filter: -9.255963e+061 result=40 11:33:22 Get A/D value=-858993460 result=40 11:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:22 Parameters OK 11:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:22 Set A/D data flow result=40 11:33:22 Set A/D channel type result=40 11:33:22 Set A/D encoding result=40 11:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:22 Set channel filter=0.000000e+000 result=40 11:33:22 Config A/D Result=40 11:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:22 Get A/D filter: -9.255963e+061 result=40 11:33:22 Get A/D value=-858993460 result=40 11:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:22 Aux= 11:33:22 Message to Camera, serial 220026 queued 11:33:59 Received message from Master: op=PointingHead serial=220039 11:33:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:33:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:33:59 Point started: ret=0 11:33:59 point_skyscan result=0 11:34:00 Check angles 11:34:00 SkyScan query 11:34:00 SkyScan query done: ret=0 az=135.24<-9016 ze=36.93<-9538 Statuses=0009 0009 11:34:00 Msec=0 True Az=135.24 Ze=36.93 Az status=0009 Ze status=0009 11:34:00 Check angles 11:34:00 SkyScan query 11:34:01 SkyScan query done: ret=0 az=117.735<-7849 ze=15.975<-10935 Statuses=0009 0009 11:34:01 Msec=750 True Az=117.735 Ze=15.975 Az status=0009 Ze status=0009 11:34:01 Check angles 11:34:01 SkyScan query 11:34:02 SkyScan query done: ret=0 az=100.38<-6692 ze=-4.98<-12332 Statuses=0009 0009 11:34:02 Msec=1500 True Az=100.38 Ze=-4.98 Az status=0009 Ze status=0009 11:34:02 Check angles 11:34:02 SkyScan query 11:34:02 SkyScan query done: ret=0 az=82.8<-5520 ze=-25.935<-13729 Statuses=0009 0009 11:34:02 Msec=2250 True Az=82.8 Ze=-25.935 Az status=0009 Ze status=0009 11:34:03 Check angles 11:34:03 SkyScan query 11:34:03 SkyScan query done: ret=0 az=65.04<-4336 ze=-38.58<-14572 Statuses=0009 0008 11:34:03 Msec=3000 True Az=65.04 Ze=-38.58 Az status=0009 Ze status=0008 11:34:03 Check angles 11:34:03 SkyScan query 11:34:04 SkyScan query done: ret=0 az=47.28<-3152 ze=-38.52<-14568 Statuses=0009 0008 11:34:04 Msec=3750 True Az=47.28 Ze=-38.52 Az status=0009 Ze status=0008 11:34:04 Check angles 11:34:04 SkyScan query 11:34:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:34:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:34:05 Message to Master queued w/err=0: serial=220039 error=0 11:34:10 Received message from Master: op=Filter serial=220040 11:34:10 Color wheel filter change from 0 to 0 11:34:10 FLIGetFilterPos err=0 currentPosition=0 11:34:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:10 Filter is already there-color wheel unchanged 11:34:10 Received message from Master: op=Shutter serial=220041 11:34:10 Shutter LASER close 11:34:10 Received message from Camera: op=State serial=220043 11:34:10 GetSingleValue result=40 Value=cccccccc 11:34:10 SkyScan query 11:34:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:34:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:11 Parameters OK 11:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:11 Set A/D data flow result=40 11:34:11 Set A/D channel type result=40 11:34:11 Set A/D encoding result=40 11:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:11 Set channel filter=0.000000e+000 result=40 11:34:11 Config A/D Result=40 11:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:11 Get A/D filter: -9.255963e+061 result=40 11:34:11 Get A/D value=-858993460 result=40 11:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:11 Parameters OK 11:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:11 Set A/D data flow result=40 11:34:11 Set A/D channel type result=40 11:34:11 Set A/D encoding result=40 11:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:11 Set channel filter=0.000000e+000 result=40 11:34:11 Config A/D Result=40 11:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:11 Get A/D filter: -9.255963e+061 result=40 11:34:11 Get A/D value=-858993460 result=40 11:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:11 Aux= 11:34:11 Message to Camera, serial 220043 queued 11:34:47 Received message from Master: op=PointingHead serial=220056 11:34:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:34:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:34:48 Point started: ret=0 11:34:48 point_skyscan result=0 11:34:48 Check angles 11:34:48 SkyScan query 11:34:49 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.04<-16536 Statuses=0009 0009 11:34:49 Msec=0 True Az=63.765 Ze=-68.04 Az status=0009 Ze status=0009 11:34:49 Check angles 11:34:49 SkyScan query 11:34:50 SkyScan query done: ret=0 az=81.12<-5408 ze=-88.995<-17933 Statuses=0009 0009 11:34:50 Msec=750 True Az=81.12 Ze=-88.995 Az status=0009 Ze status=0009 11:34:50 Check angles 11:34:50 SkyScan query 11:34:51 SkyScan query done: ret=0 az=98.67<-6578 ze=-109.95<-19330 Statuses=0009 0009 11:34:51 Msec=1500 True Az=98.67 Ze=-109.95 Az status=0009 Ze status=0009 11:34:51 Check angles 11:34:51 SkyScan query 11:34:51 SkyScan query done: ret=0 az=116.115<-7741 ze=-130.92<-20728 Statuses=0009 0009 11:34:51 Msec=2250 True Az=116.115 Ze=-130.92 Az status=0009 Ze status=0009 11:34:51 Check angles 11:34:51 SkyScan query 11:34:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 11:34:52 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 11:34:52 Check angles 11:34:52 SkyScan query 11:34:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:34:53 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:34:53 Message to Master queued w/err=0: serial=220056 error=0 11:34:58 Received message from Master: op=Filter serial=220057 11:34:58 Color wheel filter change from 0 to 0 11:34:58 FLIGetFilterPos err=0 currentPosition=0 11:34:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:58 Filter is already there-color wheel unchanged 11:34:58 Received message from Master: op=Shutter serial=220058 11:34:58 Shutter LASER close 11:34:58 Received message from Camera: op=State serial=220060 11:34:58 GetSingleValue result=40 Value=cccccccc 11:34:58 SkyScan query 11:34:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:34:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:59 Parameters OK 11:34:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:59 Set A/D data flow result=40 11:34:59 Set A/D channel type result=40 11:34:59 Set A/D encoding result=40 11:34:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:59 Set channel filter=0.000000e+000 result=40 11:34:59 Config A/D Result=40 11:34:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:59 Get A/D filter: -9.255963e+061 result=40 11:34:59 Get A/D value=-858993460 result=40 11:34:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:59 Parameters OK 11:34:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:59 Set A/D data flow result=40 11:34:59 Set A/D channel type result=40 11:34:59 Set A/D encoding result=40 11:34:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:59 Set channel filter=0.000000e+000 result=40 11:34:59 Config A/D Result=40 11:34:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:59 Get A/D filter: -9.255963e+061 result=40 11:34:59 Get A/D value=-858993460 result=40 11:34:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:59 Aux= 11:34:59 Message to Camera, serial 220060 queued 11:35:35 Received message from Master: op=PointingHead serial=220073 11:35:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:35:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:35:36 Point started: ret=0 11:35:36 point_skyscan result=0 11:35:37 Check angles 11:35:37 SkyScan query 11:35:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 11:35:37 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 11:35:37 Check angles 11:35:37 SkyScan query 11:35:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:35:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:35:38 Message to Master queued w/err=0: serial=220073 error=0 11:35:43 Received message from Master: op=Filter serial=220074 11:35:43 Color wheel filter change from 0 to 0 11:35:43 FLIGetFilterPos err=0 currentPosition=0 11:35:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:43 Filter is already there-color wheel unchanged 11:35:43 Received message from Master: op=Shutter serial=220075 11:35:43 Shutter LASER open 11:35:43 Received message from Camera: op=State serial=220077 11:35:43 GetSingleValue result=40 Value=cccccccc 11:35:43 SkyScan query 11:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:35:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:44 Parameters OK 11:35:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:44 Set A/D data flow result=40 11:35:44 Set A/D channel type result=40 11:35:44 Set A/D encoding result=40 11:35:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:44 Set channel filter=0.000000e+000 result=40 11:35:44 Config A/D Result=40 11:35:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:44 Get A/D filter: -9.255963e+061 result=40 11:35:44 Get A/D value=-858993460 result=40 11:35:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:44 Parameters OK 11:35:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:44 Set A/D data flow result=40 11:35:44 Set A/D channel type result=40 11:35:44 Set A/D encoding result=40 11:35:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:44 Set channel filter=0.000000e+000 result=40 11:35:44 Config A/D Result=40 11:35:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:44 Get A/D filter: -9.255963e+061 result=40 11:35:44 Get A/D value=-858993460 result=40 11:35:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:44 Aux= 11:35:44 Message to Camera, serial 220077 queued 11:35:52 Received message from Master: op=Shutter serial=220087 11:35:52 Shutter LASER close [UTC 2018-12-17 11:35:52] 11:35:53 Received message from Master: op=PointingHead serial=220091 11:35:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:35:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:35:53 Point started: ret=0 11:35:53 point_skyscan result=0 11:35:54 Check angles 11:35:54 SkyScan query 11:35:54 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.115<-21541 Statuses=0009 0009 11:35:54 Msec=0 True Az=136.02 Ze=-143.115 Az status=0009 Ze status=0009 11:35:55 Check angles 11:35:55 SkyScan query 11:35:55 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.085<-20139 Statuses=0009 0009 11:35:55 Msec=750 True Az=153.51 Ze=-122.085 Az status=0009 Ze status=0009 11:35:55 Check angles 11:35:55 SkyScan query 11:35:56 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.205<-18747 Statuses=0009 0009 11:35:56 Msec=1500 True Az=171.045 Ze=-101.205 Az status=0009 Ze status=0009 11:35:56 Check angles 11:35:56 SkyScan query 11:35:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.25<-17350 Statuses=0008 0009 11:35:57 Msec=2250 True Az=175.995 Ze=-80.25 Az status=0008 Ze status=0009 11:35:57 Check angles 11:35:57 SkyScan query 11:35:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.265<-15951 Statuses=0008 0009 11:35:57 Msec=3000 True Az=175.995 Ze=-59.265 Az status=0008 Ze status=0009 11:35:58 Check angles 11:35:58 SkyScan query 11:35:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:35:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:35:58 Message to Master queued w/err=0: serial=220091 error=0 11:36:03 Received message from Master: op=Filter serial=220092 11:36:03 Color wheel filter change from 0 to 0 11:36:03 FLIGetFilterPos err=0 currentPosition=0 11:36:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:03 Filter is already there-color wheel unchanged 11:36:03 Received message from Master: op=Shutter serial=220093 11:36:03 Shutter LASER close 11:36:04 Received message from Camera: op=State serial=220095 11:36:04 GetSingleValue result=40 Value=cccccccc 11:36:04 SkyScan query 11:36:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:36:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:04 Parameters OK 11:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:04 Set A/D data flow result=40 11:36:04 Set A/D channel type result=40 11:36:04 Set A/D encoding result=40 11:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:04 Set channel filter=0.000000e+000 result=40 11:36:04 Config A/D Result=40 11:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:04 Get A/D filter: -9.255963e+061 result=40 11:36:04 Get A/D value=-858993460 result=40 11:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:04 Parameters OK 11:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:04 Set A/D data flow result=40 11:36:04 Set A/D channel type result=40 11:36:04 Set A/D encoding result=40 11:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:04 Set channel filter=0.000000e+000 result=40 11:36:04 Config A/D Result=40 11:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:04 Get A/D filter: -9.255963e+061 result=40 11:36:04 Get A/D value=-858993460 result=40 11:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:04 Aux= 11:36:04 Message to Camera, serial 220095 queued 11:36:41 Received message from Master: op=PointingHead serial=220108 11:36:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:36:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:36:41 Point started: ret=0 11:36:41 point_skyscan result=0 11:36:42 Check angles 11:36:42 SkyScan query 11:36:43 SkyScan query done: ret=0 az=153.15<-10210 ze=-21.96<-13464 Statuses=0009 0009 11:36:43 Msec=0 True Az=153.15 Ze=-21.96 Az status=0009 Ze status=0009 11:36:43 Check angles 11:36:43 SkyScan query 11:36:44 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.975<-12065 Statuses=0009 0009 11:36:44 Msec=750 True Az=135.705 Ze=-0.975 Az status=0009 Ze status=0009 11:36:44 Check angles 11:36:44 SkyScan query 11:36:44 SkyScan query done: ret=0 az=118.23<-7882 ze=19.965<-10669 Statuses=0009 0009 11:36:44 Msec=1500 True Az=118.23 Ze=19.965 Az status=0009 Ze status=0009 11:36:44 Check angles 11:36:44 SkyScan query 11:36:45 SkyScan query done: ret=0 az=100.845<-6723 ze=40.95<-9270 Statuses=0009 0009 11:36:45 Msec=2250 True Az=100.845 Ze=40.95 Az status=0009 Ze status=0009 11:36:45 Check angles 11:36:45 SkyScan query 11:36:46 SkyScan query done: ret=0 az=85.95<-5730 ze=51.54<-8564 Statuses=0009 0008 11:36:46 Msec=3000 True Az=85.95 Ze=51.54 Az status=0009 Ze status=0008 11:36:46 Check angles 11:36:46 SkyScan query 11:36:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 11:36:47 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 11:36:47 Message to Master queued w/err=0: serial=220108 error=0 11:36:52 Received message from Master: op=Filter serial=220109 11:36:52 Color wheel filter change from 0 to 0 11:36:52 FLIGetFilterPos err=0 currentPosition=0 11:36:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:52 Filter is already there-color wheel unchanged 11:36:52 Received message from Master: op=Shutter serial=220110 11:36:52 Shutter LASER close 11:36:52 Received message from Camera: op=State serial=220112 11:36:52 GetSingleValue result=40 Value=cccccccc 11:36:52 SkyScan query 11:36:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:36:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:52 Parameters OK 11:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:52 Set A/D data flow result=40 11:36:52 Set A/D channel type result=40 11:36:52 Set A/D encoding result=40 11:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:52 Set channel filter=0.000000e+000 result=40 11:36:52 Config A/D Result=40 11:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:52 Get A/D filter: -9.255963e+061 result=40 11:36:52 Get A/D value=-858993460 result=40 11:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:52 Parameters OK 11:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:52 Set A/D data flow result=40 11:36:52 Set A/D channel type result=40 11:36:52 Set A/D encoding result=40 11:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:52 Set channel filter=0.000000e+000 result=40 11:36:52 Config A/D Result=40 11:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:52 Get A/D filter: -9.255963e+061 result=40 11:36:52 Get A/D value=-858993460 result=40 11:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:52 Aux= 11:36:52 Message to Camera, serial 220112 queued 11:37:29 Received message from Master: op=PointingHead serial=220125 11:37:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:37:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:37:29 Point started: ret=0 11:37:30 point_skyscan result=0 11:37:30 Check angles 11:37:30 SkyScan query 11:37:31 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 11:37:31 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 11:37:31 Check angles 11:37:31 SkyScan query 11:37:32 SkyScan query done: ret=0 az=127.185<-8479 ze=38.505<-9433 Statuses=0009 0008 11:37:32 Msec=750 True Az=127.185 Ze=38.505 Az status=0009 Ze status=0008 11:37:32 Check angles 11:37:32 SkyScan query 11:37:32 SkyScan query done: ret=0 az=144.78<-9652 ze=38.505<-9433 Statuses=0009 0008 11:37:32 Msec=1500 True Az=144.78 Ze=38.505 Az status=0009 Ze status=0008 11:37:33 Check angles 11:37:33 SkyScan query 11:37:33 SkyScan query done: ret=0 az=162.255<-10817 ze=38.505<-9433 Statuses=0009 0008 11:37:33 Msec=2250 True Az=162.255 Ze=38.505 Az status=0009 Ze status=0008 11:37:33 Check angles 11:37:33 SkyScan query 11:37:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:37:34 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:37:34 Check angles 11:37:34 SkyScan query 11:37:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:37:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:37:35 Message to Master queued w/err=0: serial=220125 error=0 11:37:40 Received message from Master: op=Filter serial=220126 11:37:40 Color wheel filter change from 0 to 0 11:37:40 FLIGetFilterPos err=0 currentPosition=0 11:37:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:40 Filter is already there-color wheel unchanged 11:37:40 Received message from Master: op=Shutter serial=220127 11:37:40 Shutter LASER close 11:37:40 Received message from Camera: op=State serial=220129 11:37:40 GetSingleValue result=40 Value=cccccccc 11:37:40 SkyScan query 11:37:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:37:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:40 Parameters OK 11:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:40 Set A/D data flow result=40 11:37:40 Set A/D channel type result=40 11:37:40 Set A/D encoding result=40 11:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:40 Set channel filter=0.000000e+000 result=40 11:37:40 Config A/D Result=40 11:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:40 Get A/D filter: -9.255963e+061 result=40 11:37:40 Get A/D value=-858993460 result=40 11:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:40 Parameters OK 11:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:40 Set A/D data flow result=40 11:37:40 Set A/D channel type result=40 11:37:40 Set A/D encoding result=40 11:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:40 Set channel filter=0.000000e+000 result=40 11:37:40 Config A/D Result=40 11:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:40 Get A/D filter: -9.255963e+061 result=40 11:37:40 Get A/D value=-858993460 result=40 11:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:40 Aux= 11:37:40 Message to Camera, serial 220129 queued 11:38:17 Received message from Master: op=PointingHead serial=220142 11:38:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:38:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:38:18 Point started: ret=0 11:38:18 point_skyscan result=0 11:38:18 Check angles 11:38:18 SkyScan query 11:38:19 SkyScan query done: ret=0 az=153.165<-10211 ze=8.895<-11407 Statuses=0009 0009 11:38:19 Msec=0 True Az=153.165 Ze=8.895 Az status=0009 Ze status=0009 11:38:19 Check angles 11:38:19 SkyScan query 11:38:20 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.09<-12806 Statuses=0009 0009 11:38:20 Msec=750 True Az=135.735 Ze=-12.09 Az status=0009 Ze status=0009 11:38:20 Check angles 11:38:20 SkyScan query 11:38:20 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.45<-14230 Statuses=0009 0009 11:38:20 Msec=1500 True Az=117.825 Ze=-33.45 Az status=0009 Ze status=0009 11:38:21 Check angles 11:38:21 SkyScan query 11:38:21 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 11:38:21 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 11:38:21 Check angles 11:38:21 SkyScan query 11:38:22 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:38:22 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:38:22 Check angles 11:38:22 SkyScan query 11:38:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:38:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:38:23 Message to Master queued w/err=0: serial=220142 error=0 11:38:28 Received message from Master: op=Filter serial=220143 11:38:28 Color wheel filter change from 0 to 0 11:38:28 FLIGetFilterPos err=0 currentPosition=0 11:38:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:28 Filter is already there-color wheel unchanged 11:38:28 Received message from Master: op=Shutter serial=220144 11:38:28 Shutter LASER close 11:38:28 Received message from Camera: op=State serial=220146 11:38:28 GetSingleValue result=40 Value=cccccccc 11:38:28 SkyScan query 11:38:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:38:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:29 Parameters OK 11:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:29 Set A/D data flow result=40 11:38:29 Set A/D channel type result=40 11:38:29 Set A/D encoding result=40 11:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:29 Set channel filter=0.000000e+000 result=40 11:38:29 Config A/D Result=40 11:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:29 Get A/D filter: -9.255963e+061 result=40 11:38:29 Get A/D value=-858993460 result=40 11:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:29 Parameters OK 11:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:29 Set A/D data flow result=40 11:38:29 Set A/D channel type result=40 11:38:29 Set A/D encoding result=40 11:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:29 Set channel filter=0.000000e+000 result=40 11:38:29 Config A/D Result=40 11:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:29 Get A/D filter: -9.255963e+061 result=40 11:38:29 Get A/D value=-858993460 result=40 11:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:29 Aux= 11:38:29 Message to Camera, serial 220146 queued 11:39:05 Received message from Master: op=PointingHead serial=220159 11:39:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:39:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:39:06 Point started: ret=0 11:39:06 point_skyscan result=0 11:39:06 Check angles 11:39:06 SkyScan query 11:39:07 SkyScan query done: ret=0 az=108.78<-7252 ze=-80.985<-17399 Statuses=0009 0009 11:39:07 Msec=0 True Az=108.78 Ze=-80.985 Az status=0009 Ze status=0009 11:39:07 Check angles 11:39:07 SkyScan query 11:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.955<-18797 Statuses=0008 0009 11:39:08 Msec=750 True Az=112.995 Ze=-101.955 Az status=0008 Ze status=0009 11:39:08 Check angles 11:39:08 SkyScan query 11:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.91<-20194 Statuses=0008 0009 11:39:09 Msec=1500 True Az=112.995 Ze=-122.91 Az status=0008 Ze status=0009 11:39:09 Check angles 11:39:09 SkyScan query 11:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.88<-21592 Statuses=0008 0009 11:39:09 Msec=2250 True Az=112.995 Ze=-143.88 Az status=0008 Ze status=0009 11:39:09 Check angles 11:39:09 SkyScan query 11:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.82<-22988 Statuses=0008 0009 11:39:10 Msec=3000 True Az=112.995 Ze=-164.82 Az status=0008 Ze status=0009 11:39:10 Check angles 11:39:10 SkyScan query 11:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 11:39:11 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 11:39:11 Message to Master queued w/err=0: serial=220159 error=0 11:39:16 Received message from Master: op=Filter serial=220160 11:39:16 Color wheel filter change from 0 to 0 11:39:16 FLIGetFilterPos err=0 currentPosition=0 11:39:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:16 Filter is already there-color wheel unchanged 11:39:16 Received message from Master: op=Shutter serial=220161 11:39:16 Shutter LASER open 11:39:16 Received message from Camera: op=State serial=220163 11:39:16 GetSingleValue result=40 Value=cccccccc 11:39:16 SkyScan query 11:39:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:39:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:17 Parameters OK 11:39:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:17 Set A/D data flow result=40 11:39:17 Set A/D channel type result=40 11:39:17 Set A/D encoding result=40 11:39:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:17 Set channel filter=0.000000e+000 result=40 11:39:17 Config A/D Result=40 11:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:17 Get A/D filter: -9.255963e+061 result=40 11:39:17 Get A/D value=-858993460 result=40 11:39:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:17 Parameters OK 11:39:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:17 Set A/D data flow result=40 11:39:17 Set A/D channel type result=40 11:39:17 Set A/D encoding result=40 11:39:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:17 Set channel filter=0.000000e+000 result=40 11:39:17 Config A/D Result=40 11:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:17 Get A/D filter: -9.255963e+061 result=40 11:39:17 Get A/D value=-858993460 result=40 11:39:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:17 Aux= 11:39:17 Message to Camera, serial 220163 queued 11:39:25 Received message from Master: op=Shutter serial=220173 11:39:25 Shutter LASER close 11:39:26 Received message from Master: op=PointingHead serial=220177 11:39:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:39:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:39:26 Point started: ret=0 11:39:26 point_skyscan result=0 11:39:27 Check angles 11:39:27 SkyScan query 11:39:27 SkyScan query done: ret=0 az=89.88<-5992 ze=157.125<-1525 Statuses=0009 0009 11:39:27 Msec=0 True Az=89.88 Ze=157.125 Az status=0009 Ze status=0009 11:39:27 Check angles 11:39:27 SkyScan query 11:39:28 SkyScan query done: ret=0 az=72.3<-4820 ze=136.17<-2922 Statuses=0009 0009 11:39:28 Msec=750 True Az=72.3 Ze=136.17 Az status=0009 Ze status=0009 11:39:28 Check angles 11:39:28 SkyScan query 11:39:29 SkyScan query done: ret=0 az=54.735<-3649 ze=114.765<-4349 Statuses=0009 0009 11:39:29 Msec=1500 True Az=54.735 Ze=114.765 Az status=0009 Ze status=0009 11:39:29 Check angles 11:39:29 SkyScan query 11:39:29 SkyScan query done: ret=0 az=40.98<-2732 ze=93.825<-5745 Statuses=0009 0009 11:39:29 Msec=2250 True Az=40.98 Ze=93.825 Az status=0009 Ze status=0009 11:39:30 Check angles 11:39:30 SkyScan query 11:39:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 11:39:30 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 11:39:30 Check angles 11:39:30 SkyScan query 11:39:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.245<-8517 Statuses=0008 0009 11:39:31 Msec=3750 True Az=40.995 Ze=52.245 Az status=0008 Ze status=0009 11:39:31 Check angles 11:39:31 SkyScan query 11:39:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:39:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:39:32 Message to Master queued w/err=0: serial=220177 error=0 11:39:37 Received message from Master: op=Filter serial=220178 11:39:37 Color wheel filter change from 0 to 0 11:39:37 FLIGetFilterPos err=0 currentPosition=0 11:39:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:37 Filter is already there-color wheel unchanged 11:39:37 Received message from Master: op=Shutter serial=220179 11:39:37 Shutter LASER close 11:39:37 Received message from Camera: op=State serial=220181 11:39:37 GetSingleValue result=40 Value=cccccccc 11:39:37 SkyScan query 11:39:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:39:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:38 Parameters OK 11:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:38 Set A/D data flow result=40 11:39:38 Set A/D channel type result=40 11:39:38 Set A/D encoding result=40 11:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:38 Set channel filter=0.000000e+000 result=40 11:39:38 Config A/D Result=40 11:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:38 Get A/D filter: -9.255963e+061 result=40 11:39:38 Get A/D value=-858993460 result=40 11:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:38 Parameters OK 11:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:38 Set A/D data flow result=40 11:39:38 Set A/D channel type result=40 11:39:38 Set A/D encoding result=40 11:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:38 Set channel filter=0.000000e+000 result=40 11:39:38 Config A/D Result=40 11:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:38 Get A/D filter: -9.255963e+061 result=40 11:39:38 Get A/D value=-858993460 result=40 11:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:38 Aux= 11:39:38 Message to Camera, serial 220181 queued 11:40:14 Received message from Master: op=PointingHead serial=220193 11:40:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:40:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:40:15 Point started: ret=0 11:40:15 point_skyscan result=0 11:40:16 Check angles 11:40:16 SkyScan query 11:40:16 SkyScan query done: ret=0 az=64.935<-4329 ze=66.54<-7564 Statuses=0009 0008 11:40:16 Msec=0 True Az=64.935 Ze=66.54 Az status=0009 Ze status=0008 11:40:16 Check angles 11:40:16 SkyScan query 11:40:17 SkyScan query done: ret=0 az=82.515<-5501 ze=66.51<-7566 Statuses=0009 0008 11:40:17 Msec=750 True Az=82.515 Ze=66.51 Az status=0009 Ze status=0008 11:40:17 Check angles 11:40:17 SkyScan query 11:40:18 SkyScan query done: ret=0 az=99.96<-6664 ze=66.495<-7567 Statuses=0009 0008 11:40:18 Msec=1500 True Az=99.96 Ze=66.495 Az status=0009 Ze status=0008 11:40:18 Check angles 11:40:18 SkyScan query 11:40:18 SkyScan query done: ret=0 az=118.11<-7874 ze=66.495<-7567 Statuses=0009 0008 11:40:18 Msec=2250 True Az=118.11 Ze=66.495 Az status=0009 Ze status=0008 11:40:19 Check angles 11:40:19 SkyScan query 11:40:19 SkyScan query done: ret=0 az=135.285<-9019 ze=66.495<-7567 Statuses=0009 0008 11:40:19 Msec=3000 True Az=135.285 Ze=66.495 Az status=0009 Ze status=0008 11:40:19 Check angles 11:40:19 SkyScan query 11:40:20 SkyScan query done: ret=0 az=152.49<-10166 ze=66.495<-7567 Statuses=0009 0008 11:40:20 Msec=3750 True Az=152.49 Ze=66.495 Az status=0009 Ze status=0008 11:40:20 Check angles 11:40:20 SkyScan query 11:40:21 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:40:21 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:40:21 Message to Master queued w/err=0: serial=220193 error=0 11:40:26 Received message from Master: op=Filter serial=220194 11:40:26 Color wheel filter change from 0 to 0 11:40:26 FLIGetFilterPos err=0 currentPosition=0 11:40:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:26 Filter is already there-color wheel unchanged 11:40:26 Received message from Master: op=Shutter serial=220195 11:40:26 Shutter LASER close 11:40:26 Received message from Camera: op=State serial=220197 11:40:26 GetSingleValue result=40 Value=cccccccc 11:40:26 SkyScan query 11:40:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:40:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:27 Parameters OK 11:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:27 Set A/D data flow result=40 11:40:27 Set A/D channel type result=40 11:40:27 Set A/D encoding result=40 11:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:27 Set channel filter=0.000000e+000 result=40 11:40:27 Config A/D Result=40 11:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:27 Get A/D filter: -9.255963e+061 result=40 11:40:27 Get A/D value=-858993460 result=40 11:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:27 Parameters OK 11:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:27 Set A/D data flow result=40 11:40:27 Set A/D channel type result=40 11:40:27 Set A/D encoding result=40 11:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:27 Set channel filter=0.000000e+000 result=40 11:40:27 Config A/D Result=40 11:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:27 Get A/D filter: -9.255963e+061 result=40 11:40:27 Get A/D value=-858993460 result=40 11:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:27 Aux= 11:40:27 Message to Camera, serial 220197 queued 11:41:03 Received message from Master: op=PointingHead serial=220210 11:41:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:41:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:41:04 Point started: ret=0 11:41:04 point_skyscan result=0 11:41:04 Check angles 11:41:04 SkyScan query 11:41:05 SkyScan query done: ret=0 az=135.12<-9008 ze=36.825<-9545 Statuses=0009 0009 11:41:05 Msec=0 True Az=135.12 Ze=36.825 Az status=0009 Ze status=0009 11:41:05 Check angles 11:41:05 SkyScan query 11:41:06 SkyScan query done: ret=0 az=117.585<-7839 ze=15.885<-10941 Statuses=0009 0009 11:41:06 Msec=750 True Az=117.585 Ze=15.885 Az status=0009 Ze status=0009 11:41:06 Check angles 11:41:06 SkyScan query 11:41:07 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.475<-12365 Statuses=0009 0009 11:41:07 Msec=1500 True Az=99.9 Ze=-5.475 Az status=0009 Ze status=0009 11:41:07 Check angles 11:41:07 SkyScan query 11:41:07 SkyScan query done: ret=0 az=81.975<-5465 ze=-26.91<-13794 Statuses=0009 0009 11:41:07 Msec=2250 True Az=81.975 Ze=-26.91 Az status=0009 Ze status=0009 11:41:07 Check angles 11:41:07 SkyScan query 11:41:08 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.58<-14572 Statuses=0009 0008 11:41:08 Msec=3000 True Az=64.485 Ze=-38.58 Az status=0009 Ze status=0008 11:41:08 Check angles 11:41:08 SkyScan query 11:41:09 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.52<-14568 Statuses=0009 0008 11:41:09 Msec=3750 True Az=47.13 Ze=-38.52 Az status=0009 Ze status=0008 11:41:09 Check angles 11:41:09 SkyScan query 11:41:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:41:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:41:10 Message to Master queued w/err=0: serial=220210 error=0 11:41:15 Received message from Master: op=Filter serial=220211 11:41:15 Color wheel filter change from 0 to 0 11:41:15 FLIGetFilterPos err=0 currentPosition=0 11:41:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:15 Filter is already there-color wheel unchanged 11:41:15 Received message from Master: op=Shutter serial=220212 11:41:15 Shutter LASER close 11:41:15 Received message from Camera: op=State serial=220214 11:41:15 GetSingleValue result=40 Value=cccccccc 11:41:15 SkyScan query 11:41:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:41:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:15 Parameters OK 11:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:15 Set A/D data flow result=40 11:41:15 Set A/D channel type result=40 11:41:15 Set A/D encoding result=40 11:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:15 Set channel filter=0.000000e+000 result=40 11:41:15 Config A/D Result=40 11:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:15 Get A/D filter: -9.255963e+061 result=40 11:41:15 Get A/D value=-858993460 result=40 11:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:15 Parameters OK 11:41:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:15 Set A/D data flow result=40 11:41:15 Set A/D channel type result=40 11:41:15 Set A/D encoding result=40 11:41:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:15 Set channel filter=0.000000e+000 result=40 11:41:15 Config A/D Result=40 11:41:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:15 Get A/D filter: -9.255963e+061 result=40 11:41:15 Get A/D value=-858993460 result=40 11:41:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:15 Aux= 11:41:15 Message to Camera, serial 220214 queued 11:41:52 Received message from Master: op=PointingHead serial=220227 11:41:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:41:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:41:53 Point started: ret=0 11:41:53 point_skyscan result=0 11:41:53 Check angles 11:41:53 SkyScan query 11:41:54 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.115<-16541 Statuses=0009 0009 11:41:54 Msec=0 True Az=63.825 Ze=-68.115 Az status=0009 Ze status=0009 11:41:54 Check angles 11:41:54 SkyScan query 11:41:55 SkyScan query done: ret=0 az=81.12<-5408 ze=-89.115<-17941 Statuses=0009 0009 11:41:55 Msec=750 True Az=81.12 Ze=-89.115 Az status=0009 Ze status=0009 11:41:55 Check angles 11:41:55 SkyScan query 11:41:55 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.535<-19369 Statuses=0009 0009 11:41:55 Msec=1500 True Az=99.18 Ze=-110.535 Az status=0009 Ze status=0009 11:41:56 Check angles 11:41:56 SkyScan query 11:41:56 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.445<-20763 Statuses=0009 0009 11:41:56 Msec=2250 True Az=116.625 Ze=-131.445 Az status=0009 Ze status=0009 11:41:56 Check angles 11:41:56 SkyScan query 11:41:57 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 11:41:57 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 11:41:57 Check angles 11:41:57 SkyScan query 11:41:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:41:58 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:41:58 Message to Master queued w/err=0: serial=220227 error=0 11:42:03 Received message from Master: op=Filter serial=220228 11:42:03 Color wheel filter change from 0 to 0 11:42:03 FLIGetFilterPos err=0 currentPosition=0 11:42:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:03 Filter is already there-color wheel unchanged 11:42:03 Received message from Master: op=Shutter serial=220229 11:42:03 Shutter LASER close 11:42:03 Received message from Camera: op=State serial=220231 11:42:03 GetSingleValue result=40 Value=cccccccc 11:42:03 SkyScan query 11:42:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:42:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:03 Parameters OK 11:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:03 Set A/D data flow result=40 11:42:03 Set A/D channel type result=40 11:42:03 Set A/D encoding result=40 11:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:03 Set channel filter=0.000000e+000 result=40 11:42:03 Config A/D Result=40 11:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:03 Get A/D filter: -9.255963e+061 result=40 11:42:03 Get A/D value=-858993460 result=40 11:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:03 Parameters OK 11:42:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:03 Set A/D data flow result=40 11:42:03 Set A/D channel type result=40 11:42:03 Set A/D encoding result=40 11:42:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:03 Set channel filter=0.000000e+000 result=40 11:42:03 Config A/D Result=40 11:42:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:03 Get A/D filter: -9.255963e+061 result=40 11:42:03 Get A/D value=-858993460 result=40 11:42:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:03 Aux= 11:42:03 Message to Camera, serial 220231 queued 11:42:40 Received message from Master: op=PointingHead serial=220244 11:42:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:42:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:42:41 Point started: ret=0 11:42:41 point_skyscan result=0 11:42:41 Check angles 11:42:41 SkyScan query 11:42:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 11:42:42 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 11:42:42 Check angles 11:42:42 SkyScan query 11:42:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:42:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:42:43 Message to Master queued w/err=0: serial=220244 error=0 11:42:48 Received message from Master: op=Filter serial=220245 11:42:48 Color wheel filter change from 0 to 0 11:42:48 FLIGetFilterPos err=0 currentPosition=0 11:42:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:48 Filter is already there-color wheel unchanged 11:42:48 Received message from Master: op=Shutter serial=220246 11:42:48 Shutter LASER open 11:42:48 Received message from Camera: op=State serial=220248 11:42:48 GetSingleValue result=40 Value=cccccccc 11:42:48 SkyScan query 11:42:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:42:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:49 Parameters OK 11:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:49 Set A/D data flow result=40 11:42:49 Set A/D channel type result=40 11:42:49 Set A/D encoding result=40 11:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:49 Set channel filter=0.000000e+000 result=40 11:42:49 Config A/D Result=40 11:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:49 Get A/D filter: -9.255963e+061 result=40 11:42:49 Get A/D value=-858993460 result=40 11:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:49 Parameters OK 11:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:49 Set A/D data flow result=40 11:42:49 Set A/D channel type result=40 11:42:49 Set A/D encoding result=40 11:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:49 Set channel filter=0.000000e+000 result=40 11:42:49 Config A/D Result=40 11:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:49 Get A/D filter: -9.255963e+061 result=40 11:42:49 Get A/D value=-858993460 result=40 11:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:49 Aux= 11:42:49 Message to Camera, serial 220248 queued 11:42:57 Received message from Master: op=Shutter serial=220258 11:42:57 Shutter LASER close 11:42:58 Received message from Master: op=PointingHead serial=220262 11:42:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:42:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:42:58 Point started: ret=0 11:42:58 point_skyscan result=0 11:42:59 Check angles 11:42:59 SkyScan query 11:42:59 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.875<-21525 Statuses=0009 0009 11:42:59 Msec=0 True Az=136.155 Ze=-142.875 Az status=0009 Ze status=0009 11:43:00 Check angles 11:43:00 SkyScan query 11:43:00 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.935<-20129 Statuses=0009 0009 11:43:00 Msec=750 True Az=153.72 Ze=-121.935 Az status=0009 Ze status=0009 11:43:00 Check angles 11:43:00 SkyScan query 11:43:01 SkyScan query done: ret=0 az=171.21<-11414 ze=-100.965<-18731 Statuses=0009 0009 11:43:01 Msec=1500 True Az=171.21 Ze=-100.965 Az status=0009 Ze status=0009 11:43:01 Check angles 11:43:01 SkyScan query 11:43:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.59<-17306 Statuses=0008 0009 11:43:02 Msec=2250 True Az=176.01 Ze=-79.59 Az status=0008 Ze status=0009 11:43:02 Check angles 11:43:02 SkyScan query 11:43:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.605<-15907 Statuses=0008 0009 11:43:02 Msec=3000 True Az=176.01 Ze=-58.605 Az status=0008 Ze status=0009 11:43:03 Check angles 11:43:03 SkyScan query 11:43:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:43:03 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:43:03 Message to Master queued w/err=0: serial=220262 error=0 11:43:08 Received message from Master: op=Filter serial=220263 11:43:08 Color wheel filter change from 0 to 0 11:43:08 FLIGetFilterPos err=0 currentPosition=0 11:43:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:08 Filter is already there-color wheel unchanged 11:43:08 Received message from Master: op=Shutter serial=220264 11:43:08 Shutter LASER close 11:43:08 Received message from Camera: op=State serial=220266 11:43:08 GetSingleValue result=40 Value=cccccccc 11:43:08 SkyScan query 11:43:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:43:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:09 Parameters OK 11:43:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:09 Set A/D data flow result=40 11:43:09 Set A/D channel type result=40 11:43:09 Set A/D encoding result=40 11:43:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:09 Set channel filter=0.000000e+000 result=40 11:43:09 Config A/D Result=40 11:43:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:09 Get A/D filter: -9.255963e+061 result=40 11:43:09 Get A/D value=-858993460 result=40 11:43:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:09 Parameters OK 11:43:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:09 Set A/D data flow result=40 11:43:09 Set A/D channel type result=40 11:43:09 Set A/D encoding result=40 11:43:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:09 Set channel filter=0.000000e+000 result=40 11:43:09 Config A/D Result=40 11:43:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:09 Get A/D filter: -9.255963e+061 result=40 11:43:09 Get A/D value=-858993460 result=40 11:43:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:09 Aux= 11:43:09 Message to Camera, serial 220266 queued 11:43:45 Received message from Master: op=PointingHead serial=220278 11:43:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:43:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:43:45 Point started: ret=0 11:43:45 point_skyscan result=0 11:43:46 Check angles 11:43:46 SkyScan query 11:43:47 SkyScan query done: ret=0 az=152.895<-10193 ze=-21.54<-13436 Statuses=0009 0009 11:43:47 Msec=0 True Az=152.895 Ze=-21.54 Az status=0009 Ze status=0009 11:43:47 Check angles 11:43:47 SkyScan query 11:43:47 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.54<-12036 Statuses=0009 0009 11:43:47 Msec=750 True Az=135.435 Ze=-0.54 Az status=0009 Ze status=0009 11:43:48 Check angles 11:43:48 SkyScan query 11:43:48 SkyScan query done: ret=0 az=117.51<-7834 ze=20.865<-10609 Statuses=0009 0009 11:43:48 Msec=1500 True Az=117.51 Ze=20.865 Az status=0009 Ze status=0009 11:43:48 Check angles 11:43:48 SkyScan query 11:43:49 SkyScan query done: ret=0 az=100.125<-6675 ze=41.79<-9214 Statuses=0009 0009 11:43:49 Msec=2250 True Az=100.125 Ze=41.79 Az status=0009 Ze status=0009 11:43:49 Check angles 11:43:49 SkyScan query 11:43:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 11:43:50 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 11:43:50 Check angles 11:43:50 SkyScan query 11:43:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:43:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:43:50 Message to Master queued w/err=0: serial=220278 error=0 11:43:55 Received message from Master: op=Filter serial=220279 11:43:55 Color wheel filter change from 0 to 0 11:43:55 FLIGetFilterPos err=0 currentPosition=0 11:43:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:55 Filter is already there-color wheel unchanged 11:43:56 Received message from Master: op=Shutter serial=220280 11:43:56 Shutter LASER close 11:43:56 Received message from Camera: op=State serial=220282 11:43:56 GetSingleValue result=40 Value=cccccccc 11:43:56 SkyScan query 11:43:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:43:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:56 Parameters OK 11:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:56 Set A/D data flow result=40 11:43:56 Set A/D channel type result=40 11:43:56 Set A/D encoding result=40 11:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:56 Set channel filter=0.000000e+000 result=40 11:43:56 Config A/D Result=40 11:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:56 Get A/D filter: -9.255963e+061 result=40 11:43:56 Get A/D value=-858993460 result=40 11:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:56 Parameters OK 11:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:56 Set A/D data flow result=40 11:43:56 Set A/D channel type result=40 11:43:56 Set A/D encoding result=40 11:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:56 Set channel filter=0.000000e+000 result=40 11:43:56 Config A/D Result=40 11:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:56 Get A/D filter: -9.255963e+061 result=40 11:43:56 Get A/D value=-858993460 result=40 11:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:56 Aux= 11:43:56 Message to Camera, serial 220282 queued 11:44:33 Received message from Master: op=PointingHead serial=220295 11:44:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:44:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:44:33 Point started: ret=0 11:44:33 point_skyscan result=0 11:44:34 Check angles 11:44:34 SkyScan query 11:44:35 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 11:44:35 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 11:44:35 Check angles 11:44:35 SkyScan query 11:44:35 SkyScan query done: ret=0 az=127.155<-8477 ze=38.505<-9433 Statuses=0009 0008 11:44:35 Msec=750 True Az=127.155 Ze=38.505 Az status=0009 Ze status=0008 11:44:36 Check angles 11:44:36 SkyScan query 11:44:36 SkyScan query done: ret=0 az=144.705<-9647 ze=38.505<-9433 Statuses=0009 0008 11:44:36 Msec=1500 True Az=144.705 Ze=38.505 Az status=0009 Ze status=0008 11:44:36 Check angles 11:44:36 SkyScan query 11:44:37 SkyScan query done: ret=0 az=162.165<-10811 ze=38.505<-9433 Statuses=0009 0008 11:44:37 Msec=2250 True Az=162.165 Ze=38.505 Az status=0009 Ze status=0008 11:44:37 Check angles 11:44:37 SkyScan query 11:44:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:44:38 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:44:38 Check angles 11:44:38 SkyScan query 11:44:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:44:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:44:38 Message to Master queued w/err=0: serial=220295 error=0 11:44:43 Received message from Master: op=Filter serial=220296 11:44:43 Color wheel filter change from 0 to 0 11:44:43 FLIGetFilterPos err=0 currentPosition=0 11:44:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:43 Filter is already there-color wheel unchanged 11:44:44 Received message from Master: op=Shutter serial=220297 11:44:44 Shutter LASER close 11:44:44 Received message from Camera: op=State serial=220299 11:44:44 GetSingleValue result=40 Value=cccccccc 11:44:44 SkyScan query 11:44:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:44:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:44 Parameters OK 11:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:44 Set A/D data flow result=40 11:44:44 Set A/D channel type result=40 11:44:44 Set A/D encoding result=40 11:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:44 Set channel filter=0.000000e+000 result=40 11:44:44 Config A/D Result=40 11:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:44 Get A/D filter: -9.255963e+061 result=40 11:44:44 Get A/D value=-858993460 result=40 11:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:44 Parameters OK 11:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:44 Set A/D data flow result=40 11:44:44 Set A/D channel type result=40 11:44:44 Set A/D encoding result=40 11:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:44 Set channel filter=0.000000e+000 result=40 11:44:44 Config A/D Result=40 11:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:44 Get A/D filter: -9.255963e+061 result=40 11:44:44 Get A/D value=-858993460 result=40 11:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:44 Aux= 11:44:44 Message to Camera, serial 220299 queued 11:45:21 Received message from Master: op=PointingHead serial=220312 11:45:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:45:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:45:21 Point started: ret=0 11:45:21 point_skyscan result=0 11:45:22 Check angles 11:45:22 SkyScan query 11:45:23 SkyScan query done: ret=0 az=153.105<-10207 ze=8.91<-11406 Statuses=0009 0009 11:45:23 Msec=0 True Az=153.105 Ze=8.91 Az status=0009 Ze status=0009 11:45:23 Check angles 11:45:23 SkyScan query 11:45:23 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.51<-12834 Statuses=0009 0009 11:45:23 Msec=750 True Az=135.3 Ze=-12.51 Az status=0009 Ze status=0009 11:45:24 Check angles 11:45:24 SkyScan query 11:45:24 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.435<-14229 Statuses=0009 0009 11:45:24 Msec=1500 True Az=117.765 Ze=-33.435 Az status=0009 Ze status=0009 11:45:24 Check angles 11:45:24 SkyScan query 11:45:25 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.555<-15437 Statuses=0009 0009 11:45:25 Msec=2250 True Az=100.41 Ze=-51.555 Az status=0009 Ze status=0009 11:45:25 Check angles 11:45:25 SkyScan query 11:45:26 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:45:26 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:45:26 Check angles 11:45:26 SkyScan query 11:45:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:45:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:45:27 Message to Master queued w/err=0: serial=220312 error=0 11:45:27 Received message from Master: op=Identify serial=220313 11:45:32 Received message from Master: op=Filter serial=220316 11:45:32 Color wheel filter change from 0 to 0 11:45:32 FLIGetFilterPos err=0 currentPosition=0 11:45:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:32 Filter is already there-color wheel unchanged 11:45:32 Received message from Master: op=Shutter serial=220317 11:45:32 Shutter LASER close 11:45:32 Received message from Camera: op=State serial=220319 11:45:32 GetSingleValue result=40 Value=cccccccc 11:45:32 SkyScan query 11:45:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:45:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:32 Parameters OK 11:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:32 Set A/D data flow result=40 11:45:32 Set A/D channel type result=40 11:45:32 Set A/D encoding result=40 11:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:32 Set channel filter=0.000000e+000 result=40 11:45:32 Config A/D Result=40 11:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:32 Get A/D filter: -9.255963e+061 result=40 11:45:32 Get A/D value=-858993460 result=40 11:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:32 Parameters OK 11:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:32 Set A/D data flow result=40 11:45:32 Set A/D channel type result=40 11:45:32 Set A/D encoding result=40 11:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:32 Set channel filter=0.000000e+000 result=40 11:45:32 Config A/D Result=40 11:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:32 Get A/D filter: -9.255963e+061 result=40 11:45:32 Get A/D value=-858993460 result=40 11:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:32 Aux= 11:45:32 Message to Camera, serial 220319 queued 11:46:09 Received message from Master: op=PointingHead serial=220332 11:46:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:46:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:46:09 Point started: ret=0 [UTC 2018-12-17 11:46:09] 11:46:09 point_skyscan result=0 11:46:10 Check angles 11:46:10 SkyScan query 11:46:11 SkyScan query done: ret=0 az=110.49<-7366 ze=-83.025<-17535 Statuses=0009 0009 11:46:11 Msec=0 True Az=110.49 Ze=-83.025 Az status=0009 Ze status=0009 11:46:11 Check angles 11:46:11 SkyScan query 11:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-104.43<-18962 Statuses=0008 0009 11:46:12 Msec=750 True Az=112.995 Ze=-104.43 Az status=0008 Ze status=0009 11:46:12 Check angles 11:46:12 SkyScan query 11:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-125.415<-20361 Statuses=0008 0009 11:46:12 Msec=1500 True Az=112.995 Ze=-125.415 Az status=0008 Ze status=0009 11:46:13 Check angles 11:46:13 SkyScan query 11:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-146.355<-21757 Statuses=0008 0009 11:46:13 Msec=2250 True Az=112.995 Ze=-146.355 Az status=0008 Ze status=0009 11:46:13 Check angles 11:46:13 SkyScan query 11:46:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-167.31<-23154 Statuses=0008 0009 11:46:14 Msec=3000 True Az=112.995 Ze=-167.31 Az status=0008 Ze status=0009 11:46:14 Check angles 11:46:14 SkyScan query 11:46:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:46:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:46:15 Message to Master queued w/err=0: serial=220332 error=0 11:46:20 Received message from Master: op=Filter serial=220333 11:46:20 Color wheel filter change from 0 to 0 11:46:20 FLIGetFilterPos err=0 currentPosition=0 11:46:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:20 Filter is already there-color wheel unchanged 11:46:20 Received message from Master: op=Shutter serial=220334 11:46:20 Shutter LASER open 11:46:20 Received message from Camera: op=State serial=220336 11:46:20 GetSingleValue result=40 Value=cccccccc 11:46:20 SkyScan query 11:46:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:46:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:21 Parameters OK 11:46:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:21 Set A/D data flow result=40 11:46:21 Set A/D channel type result=40 11:46:21 Set A/D encoding result=40 11:46:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:21 Set channel filter=0.000000e+000 result=40 11:46:21 Config A/D Result=40 11:46:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:21 Get A/D filter: -9.255963e+061 result=40 11:46:21 Get A/D value=-858993460 result=40 11:46:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:21 Parameters OK 11:46:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:21 Set A/D data flow result=40 11:46:21 Set A/D channel type result=40 11:46:21 Set A/D encoding result=40 11:46:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:21 Set channel filter=0.000000e+000 result=40 11:46:21 Config A/D Result=40 11:46:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:21 Get A/D filter: -9.255963e+061 result=40 11:46:21 Get A/D value=-858993460 result=40 11:46:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:21 Aux= 11:46:21 Message to Camera, serial 220336 queued 11:46:28 Received message from Master: op=Shutter serial=220345 11:46:28 Shutter LASER close 11:46:29 Received message from Master: op=PointingHead serial=220349 11:46:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:46:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:46:29 Point started: ret=0 11:46:29 point_skyscan result=0 11:46:30 Check angles 11:46:30 SkyScan query 11:46:30 SkyScan query done: ret=0 az=89.67<-5978 ze=156.93<-1538 Statuses=0009 0009 11:46:30 Msec=0 True Az=89.67 Ze=156.93 Az status=0009 Ze status=0009 11:46:30 Check angles 11:46:30 SkyScan query 11:46:31 SkyScan query done: ret=0 az=71.805<-4787 ze=135.555<-2963 Statuses=0009 0009 11:46:31 Msec=750 True Az=71.805 Ze=135.555 Az status=0009 Ze status=0009 11:46:31 Check angles 11:46:31 SkyScan query 11:46:32 SkyScan query done: ret=0 az=54.51<-3634 ze=114.57<-4362 Statuses=0009 0009 11:46:32 Msec=1500 True Az=54.51 Ze=114.57 Az status=0009 Ze status=0009 11:46:32 Check angles 11:46:32 SkyScan query 11:46:32 SkyScan query done: ret=0 az=40.965<-2731 ze=93.63<-5758 Statuses=0009 0009 11:46:32 Msec=2250 True Az=40.965 Ze=93.63 Az status=0009 Ze status=0009 11:46:33 Check angles 11:46:33 SkyScan query 11:46:33 SkyScan query done: ret=0 az=40.995<-2733 ze=72.24<-7184 Statuses=0008 0009 11:46:33 Msec=3000 True Az=40.995 Ze=72.24 Az status=0008 Ze status=0009 11:46:33 Check angles 11:46:33 SkyScan query 11:46:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.17<-8522 Statuses=0008 0009 11:46:34 Msec=3750 True Az=40.995 Ze=52.17 Az status=0008 Ze status=0009 11:46:34 Check angles 11:46:34 SkyScan query 11:46:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:46:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:46:35 Message to Master queued w/err=0: serial=220349 error=0 11:46:40 Received message from Master: op=Filter serial=220350 11:46:40 Color wheel filter change from 0 to 0 11:46:40 FLIGetFilterPos err=0 currentPosition=0 11:46:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:40 Filter is already there-color wheel unchanged 11:46:40 Received message from Master: op=Shutter serial=220351 11:46:40 Shutter LASER close 11:46:40 Received message from Camera: op=State serial=220353 11:46:40 GetSingleValue result=40 Value=cccccccc 11:46:40 SkyScan query 11:46:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:46:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:41 Parameters OK 11:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:41 Set A/D data flow result=40 11:46:41 Set A/D channel type result=40 11:46:41 Set A/D encoding result=40 11:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:41 Set channel filter=0.000000e+000 result=40 11:46:41 Config A/D Result=40 11:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:41 Get A/D filter: -9.255963e+061 result=40 11:46:41 Get A/D value=-858993460 result=40 11:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:41 Parameters OK 11:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:41 Set A/D data flow result=40 11:46:41 Set A/D channel type result=40 11:46:41 Set A/D encoding result=40 11:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:41 Set channel filter=0.000000e+000 result=40 11:46:41 Config A/D Result=40 11:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:41 Get A/D filter: -9.255963e+061 result=40 11:46:41 Get A/D value=-858993460 result=40 11:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:41 Aux= 11:46:41 Message to Camera, serial 220353 queued 11:47:17 Received message from Master: op=PointingHead serial=220366 11:47:17 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:47:17 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:47:18 Point started: ret=0 11:47:18 point_skyscan result=0 11:47:19 Check angles 11:47:19 SkyScan query 11:47:19 SkyScan query done: ret=0 az=64.185<-4279 ze=66.54<-7564 Statuses=0009 0008 11:47:19 Msec=0 True Az=64.185 Ze=66.54 Az status=0009 Ze status=0008 11:47:19 Check angles 11:47:19 SkyScan query 11:47:20 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 11:47:20 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 11:47:20 Check angles 11:47:20 SkyScan query 11:47:21 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 11:47:21 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 11:47:21 Check angles 11:47:21 SkyScan query 11:47:21 SkyScan query done: ret=0 az=116.535<-7769 ze=66.495<-7567 Statuses=0009 0008 11:47:21 Msec=2250 True Az=116.535 Ze=66.495 Az status=0009 Ze status=0008 11:47:22 Check angles 11:47:22 SkyScan query 11:47:22 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 11:47:22 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 11:47:22 Check angles 11:47:22 SkyScan query 11:47:23 SkyScan query done: ret=0 az=151.815<-10121 ze=66.495<-7567 Statuses=0009 0008 11:47:23 Msec=3750 True Az=151.815 Ze=66.495 Az status=0009 Ze status=0008 11:47:23 Check angles 11:47:23 SkyScan query 11:47:24 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:47:24 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:47:24 Message to Master queued w/err=0: serial=220366 error=0 11:47:29 Received message from Master: op=Filter serial=220367 11:47:29 Color wheel filter change from 0 to 0 11:47:29 FLIGetFilterPos err=0 currentPosition=0 11:47:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:29 Filter is already there-color wheel unchanged 11:47:29 Received message from Master: op=Shutter serial=220368 11:47:29 Shutter LASER close 11:47:29 Received message from Camera: op=State serial=220370 11:47:29 GetSingleValue result=40 Value=cccccccc 11:47:29 SkyScan query 11:47:29 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:47:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:29 Parameters OK 11:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:29 Set A/D data flow result=40 11:47:29 Set A/D channel type result=40 11:47:29 Set A/D encoding result=40 11:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:29 Set channel filter=0.000000e+000 result=40 11:47:29 Config A/D Result=40 11:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:29 Get A/D filter: -9.255963e+061 result=40 11:47:29 Get A/D value=-858993460 result=40 11:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:29 Parameters OK 11:47:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:29 Set A/D data flow result=40 11:47:29 Set A/D channel type result=40 11:47:29 Set A/D encoding result=40 11:47:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:29 Set channel filter=0.000000e+000 result=40 11:47:29 Config A/D Result=40 11:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:29 Get A/D filter: -9.255963e+061 result=40 11:47:29 Get A/D value=-858993460 result=40 11:47:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:29 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:29 Aux= 11:47:29 Message to Camera, serial 220370 queued 11:48:06 Received message from Master: op=PointingHead serial=220383 11:48:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:48:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:48:07 Point started: ret=0 11:48:07 point_skyscan result=0 11:48:07 Check angles 11:48:07 SkyScan query 11:48:08 SkyScan query done: ret=0 az=134.805<-8987 ze=36.63<-9558 Statuses=0009 0009 11:48:08 Msec=0 True Az=134.805 Ze=36.63 Az status=0009 Ze status=0009 11:48:08 Check angles 11:48:08 SkyScan query 11:48:09 SkyScan query done: ret=0 az=117.375<-7825 ze=15.705<-10953 Statuses=0009 0009 11:48:09 Msec=750 True Az=117.375 Ze=15.705 Az status=0009 Ze status=0009 11:48:09 Check angles 11:48:09 SkyScan query 11:48:10 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.34<-12356 Statuses=0009 0009 11:48:10 Msec=1500 True Az=100.14 Ze=-5.34 Az status=0009 Ze status=0009 11:48:10 Check angles 11:48:10 SkyScan query 11:48:10 SkyScan query done: ret=0 az=82.53<-5502 ze=-26.235<-13749 Statuses=0009 0009 11:48:10 Msec=2250 True Az=82.53 Ze=-26.235 Az status=0009 Ze status=0009 11:48:10 Check angles 11:48:10 SkyScan query 11:48:11 SkyScan query done: ret=0 az=65.1<-4340 ze=-38.58<-14572 Statuses=0009 0008 11:48:11 Msec=3000 True Az=65.1 Ze=-38.58 Az status=0009 Ze status=0008 11:48:11 Check angles 11:48:11 SkyScan query 11:48:12 SkyScan query done: ret=0 az=47.52<-3168 ze=-38.52<-14568 Statuses=0009 0008 11:48:12 Msec=3750 True Az=47.52 Ze=-38.52 Az status=0009 Ze status=0008 11:48:12 Check angles 11:48:12 SkyScan query 11:48:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:48:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:48:13 Message to Master queued w/err=0: serial=220383 error=0 11:48:18 Received message from Master: op=Filter serial=220384 11:48:18 Color wheel filter change from 0 to 0 11:48:18 FLIGetFilterPos err=0 currentPosition=0 11:48:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:18 Filter is already there-color wheel unchanged 11:48:18 Received message from Master: op=Shutter serial=220385 11:48:18 Shutter LASER close 11:48:18 Received message from Camera: op=State serial=220387 11:48:18 GetSingleValue result=40 Value=cccccccc 11:48:18 SkyScan query 11:48:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:18 Parameters OK 11:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:18 Set A/D data flow result=40 11:48:18 Set A/D channel type result=40 11:48:18 Set A/D encoding result=40 11:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:18 Set channel filter=0.000000e+000 result=40 11:48:18 Config A/D Result=40 11:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:18 Get A/D filter: -9.255963e+061 result=40 11:48:18 Get A/D value=-858993460 result=40 11:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:18 Parameters OK 11:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:18 Set A/D data flow result=40 11:48:18 Set A/D channel type result=40 11:48:18 Set A/D encoding result=40 11:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:18 Set channel filter=0.000000e+000 result=40 11:48:18 Config A/D Result=40 11:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:18 Get A/D filter: -9.255963e+061 result=40 11:48:18 Get A/D value=-858993460 result=40 11:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:18 Aux= 11:48:18 Message to Camera, serial 220387 queued 11:48:55 Received message from Master: op=PointingHead serial=220400 11:48:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:48:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:48:55 Point started: ret=0 11:48:55 point_skyscan result=0 11:48:56 Check angles 11:48:56 SkyScan query 11:48:57 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.4<-16560 Statuses=0009 0009 11:48:57 Msec=0 True Az=64.23 Ze=-68.4 Az status=0009 Ze status=0009 11:48:57 Check angles 11:48:57 SkyScan query 11:48:58 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.37<-17958 Statuses=0009 0009 11:48:58 Msec=750 True Az=81.555 Ze=-89.37 Az status=0009 Ze status=0009 11:48:58 Check angles 11:48:58 SkyScan query 11:48:58 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.31<-19354 Statuses=0009 0009 11:48:58 Msec=1500 True Az=99.21 Ze=-110.31 Az status=0009 Ze status=0009 11:48:58 Check angles 11:48:58 SkyScan query 11:48:59 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.265<-20751 Statuses=0009 0009 11:48:59 Msec=2250 True Az=116.595 Ze=-131.265 Az status=0009 Ze status=0009 11:48:59 Check angles 11:48:59 SkyScan query 11:49:00 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 11:49:00 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 11:49:00 Check angles 11:49:00 SkyScan query 11:49:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:49:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:49:01 Message to Master queued w/err=0: serial=220400 error=0 11:49:06 Received message from Master: op=Filter serial=220401 11:49:06 Color wheel filter change from 0 to 0 11:49:06 FLIGetFilterPos err=0 currentPosition=0 11:49:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:06 Filter is already there-color wheel unchanged 11:49:06 Received message from Master: op=Shutter serial=220402 11:49:06 Shutter LASER close 11:49:06 Received message from Camera: op=State serial=220404 11:49:06 GetSingleValue result=40 Value=cccccccc 11:49:06 SkyScan query 11:49:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:49:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:06 Parameters OK 11:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:06 Set A/D data flow result=40 11:49:06 Set A/D channel type result=40 11:49:06 Set A/D encoding result=40 11:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:06 Set channel filter=0.000000e+000 result=40 11:49:06 Config A/D Result=40 11:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:06 Get A/D filter: -9.255963e+061 result=40 11:49:06 Get A/D value=-858993460 result=40 11:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:06 Parameters OK 11:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:06 Set A/D data flow result=40 11:49:06 Set A/D channel type result=40 11:49:06 Set A/D encoding result=40 11:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:06 Set channel filter=0.000000e+000 result=40 11:49:06 Config A/D Result=40 11:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:06 Get A/D filter: -9.255963e+061 result=40 11:49:06 Get A/D value=-858993460 result=40 11:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:06 Aux= 11:49:06 Message to Camera, serial 220404 queued 11:49:43 Received message from Master: op=PointingHead serial=220417 11:49:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:49:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:49:44 Point started: ret=0 11:49:44 point_skyscan result=0 11:49:44 Check angles 11:49:44 SkyScan query 11:49:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.865<-23391 Statuses=0009 0009 11:49:45 Msec=0 True Az=113.01 Ze=-170.865 Az status=0009 Ze status=0009 11:49:45 Check angles 11:49:45 SkyScan query 11:49:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:49:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:49:46 Message to Master queued w/err=0: serial=220417 error=0 11:49:51 Received message from Master: op=Filter serial=220418 11:49:51 Color wheel filter change from 0 to 0 11:49:51 FLIGetFilterPos err=0 currentPosition=0 11:49:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:51 Filter is already there-color wheel unchanged 11:49:51 Received message from Master: op=Shutter serial=220419 11:49:51 Shutter LASER open 11:49:51 Received message from Camera: op=State serial=220421 11:49:51 GetSingleValue result=40 Value=cccccccc 11:49:51 SkyScan query 11:49:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:49:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:52 Parameters OK 11:49:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:52 Set A/D data flow result=40 11:49:52 Set A/D channel type result=40 11:49:52 Set A/D encoding result=40 11:49:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:52 Set channel filter=0.000000e+000 result=40 11:49:52 Config A/D Result=40 11:49:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:52 Get A/D filter: -9.255963e+061 result=40 11:49:52 Get A/D value=-858993460 result=40 11:49:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:52 Parameters OK 11:49:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:52 Set A/D data flow result=40 11:49:52 Set A/D channel type result=40 11:49:52 Set A/D encoding result=40 11:49:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:52 Set channel filter=0.000000e+000 result=40 11:49:52 Config A/D Result=40 11:49:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:52 Get A/D filter: -9.255963e+061 result=40 11:49:52 Get A/D value=-858993460 result=40 11:49:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:52 Aux= 11:49:52 Message to Camera, serial 220421 queued 11:50:00 Received message from Master: op=Shutter serial=220431 11:50:00 Shutter LASER close 11:50:01 Received message from Master: op=PointingHead serial=220435 11:50:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:50:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:50:01 Point started: ret=0 11:50:01 point_skyscan result=0 11:50:02 Check angles 11:50:02 SkyScan query 11:50:02 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.265<-21551 Statuses=0009 0009 11:50:02 Msec=0 True Az=135.93 Ze=-143.265 Az status=0009 Ze status=0009 11:50:02 Check angles 11:50:02 SkyScan query 11:50:03 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.28<-20152 Statuses=0009 0009 11:50:03 Msec=750 True Az=153.51 Ze=-122.28 Az status=0009 Ze status=0009 11:50:03 Check angles 11:50:03 SkyScan query 11:50:04 SkyScan query done: ret=0 az=170.91<-11394 ze=-101.4<-18760 Statuses=0009 0009 11:50:04 Msec=1500 True Az=170.91 Ze=-101.4 Az status=0009 Ze status=0009 11:50:04 Check angles 11:50:04 SkyScan query 11:50:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.385<-17359 Statuses=0008 0009 11:50:04 Msec=2250 True Az=175.995 Ze=-80.385 Az status=0008 Ze status=0009 11:50:05 Check angles 11:50:05 SkyScan query 11:50:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.445<-15963 Statuses=0008 0009 11:50:05 Msec=3000 True Az=175.995 Ze=-59.445 Az status=0008 Ze status=0009 11:50:05 Check angles 11:50:05 SkyScan query 11:50:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:50:06 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:50:06 Message to Master queued w/err=0: serial=220435 error=0 11:50:11 Received message from Master: op=Filter serial=220436 11:50:11 Color wheel filter change from 0 to 0 11:50:11 FLIGetFilterPos err=0 currentPosition=0 11:50:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:11 Filter is already there-color wheel unchanged 11:50:11 Received message from Master: op=Shutter serial=220437 11:50:11 Shutter LASER close 11:50:11 Received message from Camera: op=State serial=220439 11:50:11 GetSingleValue result=40 Value=cccccccc 11:50:11 SkyScan query 11:50:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:50:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:12 Parameters OK 11:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:12 Set A/D data flow result=40 11:50:12 Set A/D channel type result=40 11:50:12 Set A/D encoding result=40 11:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:12 Set channel filter=0.000000e+000 result=40 11:50:12 Config A/D Result=40 11:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:12 Get A/D filter: -9.255963e+061 result=40 11:50:12 Get A/D value=-858993460 result=40 11:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:12 Parameters OK 11:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:12 Set A/D data flow result=40 11:50:12 Set A/D channel type result=40 11:50:12 Set A/D encoding result=40 11:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:12 Set channel filter=0.000000e+000 result=40 11:50:12 Config A/D Result=40 11:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:12 Get A/D filter: -9.255963e+061 result=40 11:50:12 Get A/D value=-858993460 result=40 11:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:12 Aux= 11:50:12 Message to Camera, serial 220439 queued 11:50:49 Received message from Master: op=PointingHead serial=220452 11:50:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:50:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:50:49 Point started: ret=0 11:50:49 point_skyscan result=0 11:50:50 Check angles 11:50:50 SkyScan query 11:50:50 SkyScan query done: ret=0 az=152.895<-10193 ze=-21.585<-13439 Statuses=0009 0009 11:50:50 Msec=0 True Az=152.895 Ze=-21.585 Az status=0009 Ze status=0009 11:50:51 Check angles 11:50:51 SkyScan query 11:50:51 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.585<-12039 Statuses=0009 0009 11:50:51 Msec=750 True Az=135.42 Ze=-0.585 Az status=0009 Ze status=0009 11:50:51 Check angles 11:50:51 SkyScan query 11:50:52 SkyScan query done: ret=0 az=117.585<-7839 ze=20.79<-10614 Statuses=0009 0009 11:50:52 Msec=1500 True Az=117.585 Ze=20.79 Az status=0009 Ze status=0009 11:50:52 Check angles 11:50:52 SkyScan query 11:50:53 SkyScan query done: ret=0 az=100.155<-6677 ze=41.745<-9217 Statuses=0009 0009 11:50:53 Msec=2250 True Az=100.155 Ze=41.745 Az status=0009 Ze status=0009 11:50:53 Check angles 11:50:53 SkyScan query 11:50:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 11:50:53 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 11:50:54 Check angles 11:50:54 SkyScan query 11:50:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:50:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:50:54 Message to Master queued w/err=0: serial=220452 error=0 11:50:59 Received message from Master: op=Filter serial=220453 11:50:59 Color wheel filter change from 0 to 0 11:50:59 FLIGetFilterPos err=0 currentPosition=0 11:50:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:59 Filter is already there-color wheel unchanged 11:50:59 Received message from Master: op=Shutter serial=220454 11:50:59 Shutter LASER close 11:50:59 Received message from Camera: op=State serial=220456 11:50:59 GetSingleValue result=40 Value=cccccccc 11:50:59 SkyScan query 11:51:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:51:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:00 Parameters OK 11:51:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:00 Set A/D data flow result=40 11:51:00 Set A/D channel type result=40 11:51:00 Set A/D encoding result=40 11:51:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:00 Set channel filter=0.000000e+000 result=40 11:51:00 Config A/D Result=40 11:51:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:00 Get A/D filter: -9.255963e+061 result=40 11:51:00 Get A/D value=-858993460 result=40 11:51:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:00 Parameters OK 11:51:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:00 Set A/D data flow result=40 11:51:00 Set A/D channel type result=40 11:51:00 Set A/D encoding result=40 11:51:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:00 Set channel filter=0.000000e+000 result=40 11:51:00 Config A/D Result=40 11:51:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:00 Get A/D filter: -9.255963e+061 result=40 11:51:00 Get A/D value=-858993460 result=40 11:51:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:00 Aux= 11:51:00 Message to Camera, serial 220456 queued 11:51:37 Received message from Master: op=PointingHead serial=220469 11:51:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:51:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:51:37 Point started: ret=0 11:51:37 point_skyscan result=0 11:51:38 Check angles 11:51:38 SkyScan query 11:51:39 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 11:51:39 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 11:51:39 Check angles 11:51:39 SkyScan query 11:51:39 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 11:51:39 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 11:51:39 Check angles 11:51:39 SkyScan query 11:51:40 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 11:51:40 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 11:51:40 Check angles 11:51:40 SkyScan query 11:51:41 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 11:51:41 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 11:51:41 Check angles 11:51:41 SkyScan query 11:51:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:51:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:51:42 Check angles 11:51:42 SkyScan query 11:51:42 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:51:42 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:51:42 Message to Master queued w/err=0: serial=220469 error=0 11:51:47 Received message from Master: op=Filter serial=220470 11:51:47 Color wheel filter change from 0 to 0 11:51:47 FLIGetFilterPos err=0 currentPosition=0 11:51:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:47 Filter is already there-color wheel unchanged 11:51:47 Received message from Master: op=Shutter serial=220471 11:51:47 Shutter LASER close 11:51:47 Received message from Camera: op=State serial=220473 11:51:47 GetSingleValue result=40 Value=cccccccc 11:51:47 SkyScan query 11:51:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:51:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:48 Parameters OK 11:51:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:48 Set A/D data flow result=40 11:51:48 Set A/D channel type result=40 11:51:48 Set A/D encoding result=40 11:51:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:48 Set channel filter=0.000000e+000 result=40 11:51:48 Config A/D Result=40 11:51:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:48 Get A/D filter: -9.255963e+061 result=40 11:51:48 Get A/D value=-858993460 result=40 11:51:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:48 Parameters OK 11:51:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:48 Set A/D data flow result=40 11:51:48 Set A/D channel type result=40 11:51:48 Set A/D encoding result=40 11:51:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:48 Set channel filter=0.000000e+000 result=40 11:51:48 Config A/D Result=40 11:51:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:48 Get A/D filter: -9.255963e+061 result=40 11:51:48 Get A/D value=-858993460 result=40 11:51:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:48 Aux= 11:51:48 Message to Camera, serial 220473 queued 11:52:25 Received message from Master: op=PointingHead serial=220486 11:52:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:52:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:52:25 Point started: ret=0 11:52:25 point_skyscan result=0 11:52:26 Check angles 11:52:26 SkyScan query 11:52:27 SkyScan query done: ret=0 az=152.91<-10194 ze=8.535<-11431 Statuses=0009 0009 11:52:27 Msec=0 True Az=152.91 Ze=8.535 Az status=0009 Ze status=0009 11:52:27 Check angles 11:52:27 SkyScan query 11:52:27 SkyScan query done: ret=0 az=135.03<-9002 ze=-12.78<-12852 Statuses=0009 0009 11:52:27 Msec=750 True Az=135.03 Ze=-12.78 Az status=0009 Ze status=0009 11:52:27 Check angles 11:52:27 SkyScan query 11:52:28 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.795<-14253 Statuses=0009 0009 11:52:28 Msec=1500 True Az=117.54 Ze=-33.795 Az status=0009 Ze status=0009 11:52:28 Check angles 11:52:28 SkyScan query 11:52:29 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 11:52:29 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 11:52:29 Check angles 11:52:29 SkyScan query 11:52:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 11:52:30 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 11:52:30 Check angles 11:52:30 SkyScan query 11:52:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:52:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:52:30 Message to Master queued w/err=0: serial=220486 error=0 11:52:35 Received message from Master: op=Filter serial=220487 11:52:35 Color wheel filter change from 0 to 0 11:52:35 FLIGetFilterPos err=0 currentPosition=0 11:52:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:35 Filter is already there-color wheel unchanged 11:52:36 Received message from Master: op=Shutter serial=220488 11:52:36 Shutter LASER close 11:52:36 Received message from Camera: op=State serial=220490 11:52:36 GetSingleValue result=40 Value=cccccccc 11:52:36 SkyScan query 11:52:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:52:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:36 Parameters OK 11:52:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:36 Set A/D data flow result=40 11:52:36 Set A/D channel type result=40 11:52:36 Set A/D encoding result=40 11:52:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:36 Set channel filter=0.000000e+000 result=40 11:52:36 Config A/D Result=40 11:52:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:36 Get A/D filter: -9.255963e+061 result=40 11:52:36 Get A/D value=-858993460 result=40 11:52:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:36 Parameters OK 11:52:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:36 Set A/D data flow result=40 11:52:36 Set A/D channel type result=40 11:52:36 Set A/D encoding result=40 11:52:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:36 Set channel filter=0.000000e+000 result=40 11:52:36 Config A/D Result=40 11:52:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:36 Get A/D filter: -9.255963e+061 result=40 11:52:36 Get A/D value=-858993460 result=40 11:52:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:36 Aux= 11:52:36 Message to Camera, serial 220490 queued 11:53:13 Received message from Master: op=PointingHead serial=220503 11:53:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:53:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:53:13 Point started: ret=0 11:53:13 point_skyscan result=0 11:53:14 Check angles 11:53:14 SkyScan query 11:53:15 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.09<-17406 Statuses=0009 0009 11:53:15 Msec=0 True Az=108.915 Ze=-81.09 Az status=0009 Ze status=0009 11:53:15 Check angles 11:53:15 SkyScan query 11:53:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 11:53:15 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 11:53:16 Check angles 11:53:16 SkyScan query 11:53:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.015<-20201 Statuses=0008 0009 11:53:16 Msec=1500 True Az=112.995 Ze=-123.015 Az status=0008 Ze status=0009 11:53:16 Check angles 11:53:16 SkyScan query 11:53:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 11:53:17 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 11:53:17 Check angles 11:53:17 SkyScan query 11:53:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.94<-22996 Statuses=0008 0009 11:53:18 Msec=3000 True Az=112.995 Ze=-164.94 Az status=0008 Ze status=0009 11:53:18 Check angles 11:53:18 SkyScan query 11:53:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 11:53:18 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 11:53:18 Message to Master queued w/err=0: serial=220503 error=0 11:53:23 Received message from Master: op=Filter serial=220504 11:53:23 Color wheel filter change from 0 to 0 11:53:23 FLIGetFilterPos err=0 currentPosition=0 11:53:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:23 Filter is already there-color wheel unchanged 11:53:24 Received message from Master: op=Shutter serial=220505 11:53:24 Shutter LASER open 11:53:24 Received message from Camera: op=State serial=220507 11:53:24 GetSingleValue result=40 Value=cccccccc 11:53:24 SkyScan query 11:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:53:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:24 Parameters OK 11:53:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:24 Set A/D data flow result=40 11:53:24 Set A/D channel type result=40 11:53:24 Set A/D encoding result=40 11:53:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:24 Set channel filter=0.000000e+000 result=40 11:53:24 Config A/D Result=40 11:53:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:24 Get A/D filter: -9.255963e+061 result=40 11:53:24 Get A/D value=-858993460 result=40 11:53:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:24 Parameters OK 11:53:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:24 Set A/D data flow result=40 11:53:24 Set A/D channel type result=40 11:53:24 Set A/D encoding result=40 11:53:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:24 Set channel filter=0.000000e+000 result=40 11:53:24 Config A/D Result=40 11:53:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:24 Get A/D filter: -9.255963e+061 result=40 11:53:24 Get A/D value=-858993460 result=40 11:53:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:24 Aux= 11:53:24 Message to Camera, serial 220507 queued 11:53:33 Received message from Master: op=Shutter serial=220517 11:53:33 Shutter LASER close 11:53:33 Received message from Master: op=PointingHead serial=220521 11:53:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:53:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:53:34 Point started: ret=0 11:53:34 point_skyscan result=0 11:53:34 Check angles 11:53:34 SkyScan query 11:53:35 SkyScan query done: ret=0 az=89.805<-5987 ze=157.215<-1519 Statuses=0009 0009 11:53:35 Msec=0 True Az=89.805 Ze=157.215 Az status=0009 Ze status=0009 11:53:35 Check angles 11:53:35 SkyScan query 11:53:36 SkyScan query done: ret=0 az=72.27<-4818 ze=136.23<-2918 Statuses=0009 0009 11:53:36 Msec=750 True Az=72.27 Ze=136.23 Az status=0009 Ze status=0009 11:53:36 Check angles 11:53:36 SkyScan query 11:53:36 SkyScan query done: ret=0 az=54.96<-3664 ze=115.32<-4312 Statuses=0009 0009 11:53:36 Msec=1500 True Az=54.96 Ze=115.32 Az status=0009 Ze status=0009 11:53:37 Check angles 11:53:37 SkyScan query 11:53:37 SkyScan query done: ret=0 az=41.01<-2734 ze=94.29<-5714 Statuses=0009 0009 11:53:37 Msec=2250 True Az=41.01 Ze=94.29 Az status=0009 Ze status=0009 11:53:37 Check angles 11:53:37 SkyScan query 11:53:38 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 11:53:38 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 11:53:38 Check angles 11:53:38 SkyScan query 11:53:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 11:53:39 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 11:53:39 Check angles 11:53:39 SkyScan query 11:53:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:53:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:53:39 Message to Master queued w/err=0: serial=220521 error=0 11:53:44 Received message from Master: op=Filter serial=220522 11:53:44 Color wheel filter change from 0 to 0 11:53:44 FLIGetFilterPos err=0 currentPosition=0 11:53:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:44 Filter is already there-color wheel unchanged 11:53:45 Received message from Master: op=Shutter serial=220523 11:53:45 Shutter LASER close 11:53:45 Received message from Camera: op=State serial=220525 11:53:45 GetSingleValue result=40 Value=cccccccc 11:53:45 SkyScan query 11:53:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:53:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:45 Parameters OK 11:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:45 Set A/D data flow result=40 11:53:45 Set A/D channel type result=40 11:53:45 Set A/D encoding result=40 11:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:45 Set channel filter=0.000000e+000 result=40 11:53:45 Config A/D Result=40 11:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:45 Get A/D filter: -9.255963e+061 result=40 11:53:45 Get A/D value=-858993460 result=40 11:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:45 Parameters OK 11:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:45 Set A/D data flow result=40 11:53:45 Set A/D channel type result=40 11:53:45 Set A/D encoding result=40 11:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:45 Set channel filter=0.000000e+000 result=40 11:53:45 Config A/D Result=40 11:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:45 Get A/D filter: -9.255963e+061 result=40 11:53:45 Get A/D value=-858993460 result=40 11:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:45 Aux= 11:53:45 Message to Camera, serial 220525 queued 11:54:22 Received message from Master: op=PointingHead serial=220538 11:54:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:54:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:54:22 Point started: ret=0 11:54:22 point_skyscan result=0 11:54:23 Check angles 11:54:23 SkyScan query 11:54:24 SkyScan query done: ret=0 az=64.395<-4293 ze=66.555<-7563 Statuses=0009 0008 11:54:24 Msec=0 True Az=64.395 Ze=66.555 Az status=0009 Ze status=0008 11:54:24 Check angles 11:54:24 SkyScan query 11:54:25 SkyScan query done: ret=0 az=81.825<-5455 ze=66.495<-7567 Statuses=0009 0008 11:54:25 Msec=750 True Az=81.825 Ze=66.495 Az status=0009 Ze status=0008 11:54:25 Check angles 11:54:25 SkyScan query 11:54:25 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 11:54:25 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 11:54:25 Check angles 11:54:25 SkyScan query 11:54:26 SkyScan query done: ret=0 az=117.33<-7822 ze=66.495<-7567 Statuses=0009 0008 11:54:26 Msec=2250 True Az=117.33 Ze=66.495 Az status=0009 Ze status=0008 11:54:26 Check angles 11:54:26 SkyScan query 11:54:27 SkyScan query done: ret=0 az=134.7<-8980 ze=66.495<-7567 Statuses=0009 0008 11:54:27 Msec=3000 True Az=134.7 Ze=66.495 Az status=0009 Ze status=0008 11:54:27 Check angles 11:54:27 SkyScan query 11:54:28 SkyScan query done: ret=0 az=151.95<-10130 ze=66.495<-7567 Statuses=0009 0008 11:54:28 Msec=3750 True Az=151.95 Ze=66.495 Az status=0009 Ze status=0008 11:54:28 Check angles 11:54:28 SkyScan query 11:54:28 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:54:28 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:54:28 Message to Master queued w/err=0: serial=220538 error=0 11:54:33 Received message from Master: op=Filter serial=220539 11:54:33 Color wheel filter change from 0 to 0 11:54:33 FLIGetFilterPos err=0 currentPosition=0 11:54:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:33 Filter is already there-color wheel unchanged 11:54:34 Received message from Master: op=Shutter serial=220540 11:54:34 Shutter LASER close 11:54:34 Received message from Camera: op=State serial=220542 11:54:34 GetSingleValue result=40 Value=cccccccc 11:54:34 SkyScan query 11:54:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:54:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:34 Parameters OK 11:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:34 Set A/D data flow result=40 11:54:34 Set A/D channel type result=40 11:54:34 Set A/D encoding result=40 11:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:34 Set channel filter=0.000000e+000 result=40 11:54:34 Config A/D Result=40 11:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:34 Get A/D filter: -9.255963e+061 result=40 11:54:34 Get A/D value=-858993460 result=40 11:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:34 Parameters OK 11:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:34 Set A/D data flow result=40 11:54:34 Set A/D channel type result=40 11:54:34 Set A/D encoding result=40 11:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:34 Set channel filter=0.000000e+000 result=40 11:54:34 Config A/D Result=40 11:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:34 Get A/D filter: -9.255963e+061 result=40 11:54:34 Get A/D value=-858993460 result=40 11:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:34 Aux= 11:54:34 Message to Camera, serial 220542 queued 11:55:11 Received message from Master: op=PointingHead serial=220555 11:55:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:55:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:55:11 Point started: ret=0 11:55:11 point_skyscan result=0 11:55:12 Check angles 11:55:12 SkyScan query 11:55:13 SkyScan query done: ret=0 az=135.255<-9017 ze=36.96<-9536 Statuses=0009 0009 11:55:13 Msec=0 True Az=135.255 Ze=36.96 Az status=0009 Ze status=0009 11:55:13 Check angles 11:55:13 SkyScan query 11:55:13 SkyScan query done: ret=0 az=117.72<-7848 ze=16.02<-10932 Statuses=0009 0009 11:55:13 Msec=750 True Az=117.72 Ze=16.02 Az status=0009 Ze status=0009 11:55:14 Check angles 11:55:14 SkyScan query 11:55:14 SkyScan query done: ret=0 az=100.365<-6691 ze=-4.935<-12329 Statuses=0009 0009 11:55:14 Msec=1500 True Az=100.365 Ze=-4.935 Az status=0009 Ze status=0009 11:55:14 Check angles 11:55:14 SkyScan query 11:55:15 SkyScan query done: ret=0 az=82.755<-5517 ze=-25.89<-13726 Statuses=0009 0009 11:55:15 Msec=2250 True Az=82.755 Ze=-25.89 Az status=0009 Ze status=0009 11:55:15 Check angles 11:55:15 SkyScan query 11:55:16 SkyScan query done: ret=0 az=65.505<-4367 ze=-38.58<-14572 Statuses=0009 0008 11:55:16 Msec=3000 True Az=65.505 Ze=-38.58 Az status=0009 Ze status=0008 11:55:16 Check angles 11:55:16 SkyScan query 11:55:16 SkyScan query done: ret=0 az=47.715<-3181 ze=-38.52<-14568 Statuses=0009 0008 11:55:16 Msec=3750 True Az=47.715 Ze=-38.52 Az status=0009 Ze status=0008 11:55:17 Check angles 11:55:17 SkyScan query 11:55:17 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 11:55:17 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 11:55:17 Message to Master queued w/err=0: serial=220555 error=0 11:55:22 Received message from Master: op=Filter serial=220556 11:55:22 Color wheel filter change from 0 to 0 11:55:22 FLIGetFilterPos err=0 currentPosition=0 11:55:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:22 Filter is already there-color wheel unchanged 11:55:22 Received message from Master: op=Shutter serial=220557 11:55:22 Shutter LASER close 11:55:22 Received message from Camera: op=State serial=220559 11:55:22 GetSingleValue result=40 Value=cccccccc 11:55:22 SkyScan query 11:55:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:55:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:23 Parameters OK 11:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:23 Set A/D data flow result=40 11:55:23 Set A/D channel type result=40 11:55:23 Set A/D encoding result=40 11:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:23 Set channel filter=0.000000e+000 result=40 11:55:23 Config A/D Result=40 11:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:23 Get A/D filter: -9.255963e+061 result=40 11:55:23 Get A/D value=-858993460 result=40 11:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:23 Parameters OK 11:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:23 Set A/D data flow result=40 11:55:23 Set A/D channel type result=40 11:55:23 Set A/D encoding result=40 11:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:23 Set channel filter=0.000000e+000 result=40 11:55:23 Config A/D Result=40 11:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:23 Get A/D filter: -9.255963e+061 result=40 11:55:23 Get A/D value=-858993460 result=40 [UTC 2018-12-17 11:55:23] 11:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:23 Aux= 11:55:23 Message to Camera, serial 220559 queued [UTC 2018-12-17 11:55:52] 11:56:00 Received message from Master: op=PointingHead serial=220572 11:56:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:56:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:56:00 Point started: ret=0 11:56:00 point_skyscan result=0 11:56:01 Check angles 11:56:01 SkyScan query 11:56:02 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.355<-16557 Statuses=0009 0009 11:56:02 Msec=0 True Az=64.095 Ze=-68.355 Az status=0009 Ze status=0009 11:56:02 Check angles 11:56:02 SkyScan query 11:56:02 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.325<-17955 Statuses=0009 0009 11:56:02 Msec=750 True Az=81.54 Ze=-89.325 Az status=0009 Ze status=0009 11:56:02 Check angles 11:56:02 SkyScan query 11:56:03 SkyScan query done: ret=0 az=99<-6600 ze=-110.265<-19351 Statuses=0009 0009 11:56:03 Msec=1500 True Az=99 Ze=-110.265 Az status=0009 Ze status=0009 11:56:03 Check angles 11:56:03 SkyScan query 11:56:04 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.25<-20750 Statuses=0009 0009 11:56:04 Msec=2250 True Az=116.685 Ze=-131.25 Az status=0009 Ze status=0009 11:56:04 Check angles 11:56:04 SkyScan query 11:56:05 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 11:56:05 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 11:56:05 Check angles 11:56:05 SkyScan query 11:56:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:56:05 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:56:05 Message to Master queued w/err=0: serial=220572 error=0 11:56:10 Received message from Master: op=Filter serial=220573 11:56:10 Color wheel filter change from 0 to 0 11:56:10 FLIGetFilterPos err=0 currentPosition=0 11:56:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:10 Filter is already there-color wheel unchanged 11:56:10 Received message from Master: op=Shutter serial=220574 11:56:10 Shutter LASER close 11:56:10 Received message from Camera: op=State serial=220576 11:56:10 GetSingleValue result=40 Value=cccccccc 11:56:10 SkyScan query 11:56:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:56:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:11 Parameters OK 11:56:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:11 Set A/D data flow result=40 11:56:11 Set A/D channel type result=40 11:56:11 Set A/D encoding result=40 11:56:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:11 Set channel filter=0.000000e+000 result=40 11:56:11 Config A/D Result=40 11:56:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:11 Get A/D filter: -9.255963e+061 result=40 11:56:11 Get A/D value=-858993460 result=40 11:56:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:11 Parameters OK 11:56:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:11 Set A/D data flow result=40 11:56:11 Set A/D channel type result=40 11:56:11 Set A/D encoding result=40 11:56:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:11 Set channel filter=0.000000e+000 result=40 11:56:11 Config A/D Result=40 11:56:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:11 Get A/D filter: -9.255963e+061 result=40 11:56:11 Get A/D value=-858993460 result=40 11:56:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:11 Aux= 11:56:11 Message to Camera, serial 220576 queued 11:56:48 Received message from Master: op=PointingHead serial=220589 11:56:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:56:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:56:48 Point started: ret=0 11:56:48 point_skyscan result=0 11:56:49 Check angles 11:56:49 SkyScan query 11:56:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 11:56:50 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 11:56:50 Check angles 11:56:50 SkyScan query 11:56:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:56:50 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:56:50 Message to Master queued w/err=0: serial=220589 error=0 11:56:55 Received message from Master: op=Filter serial=220590 11:56:55 Color wheel filter change from 0 to 0 11:56:55 FLIGetFilterPos err=0 currentPosition=0 11:56:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:55 Filter is already there-color wheel unchanged 11:56:55 Received message from Master: op=Shutter serial=220591 11:56:55 Shutter LASER open 11:56:56 Received message from Camera: op=State serial=220593 11:56:56 GetSingleValue result=40 Value=cccccccc 11:56:56 SkyScan query 11:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:56:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:56 Parameters OK 11:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:56 Set A/D data flow result=40 11:56:56 Set A/D channel type result=40 11:56:56 Set A/D encoding result=40 11:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:56 Set channel filter=0.000000e+000 result=40 11:56:56 Config A/D Result=40 11:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:56 Get A/D filter: -9.255963e+061 result=40 11:56:56 Get A/D value=-858993460 result=40 11:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:56 Parameters OK 11:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:56 Set A/D data flow result=40 11:56:56 Set A/D channel type result=40 11:56:56 Set A/D encoding result=40 11:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:56 Set channel filter=0.000000e+000 result=40 11:56:56 Config A/D Result=40 11:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:56 Get A/D filter: -9.255963e+061 result=40 11:56:56 Get A/D value=-858993460 result=40 11:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:56 Aux= 11:56:56 Message to Camera, serial 220593 queued 11:57:05 Received message from Master: op=Shutter serial=220603 11:57:05 Shutter LASER close 11:57:05 Received message from Master: op=PointingHead serial=220607 11:57:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:57:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:57:06 Point started: ret=0 11:57:06 point_skyscan result=0 11:57:06 Check angles 11:57:06 SkyScan query 11:57:07 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.815<-21521 Statuses=0009 0009 11:57:07 Msec=0 True Az=136.35 Ze=-142.815 Az status=0009 Ze status=0009 11:57:07 Check angles 11:57:07 SkyScan query 11:57:08 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.83<-20122 Statuses=0009 0009 11:57:08 Msec=750 True Az=153.81 Ze=-121.83 Az status=0009 Ze status=0009 11:57:08 Check angles 11:57:08 SkyScan query 11:57:08 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.89<-18726 Statuses=0009 0009 11:57:08 Msec=1500 True Az=171.39 Ze=-100.89 Az status=0009 Ze status=0009 11:57:09 Check angles 11:57:09 SkyScan query 11:57:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.47<-17298 Statuses=0008 0009 11:57:09 Msec=2250 True Az=176.01 Ze=-79.47 Az status=0008 Ze status=0009 11:57:09 Check angles 11:57:09 SkyScan query 11:57:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.485<-15899 Statuses=0008 0009 11:57:10 Msec=3000 True Az=176.01 Ze=-58.485 Az status=0008 Ze status=0009 11:57:10 Check angles 11:57:10 SkyScan query 11:57:11 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 11:57:11 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 11:57:11 Message to Master queued w/err=0: serial=220607 error=0 11:57:16 Received message from Master: op=Filter serial=220608 11:57:16 Color wheel filter change from 0 to 0 11:57:16 FLIGetFilterPos err=0 currentPosition=0 11:57:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:16 Filter is already there-color wheel unchanged 11:57:16 Received message from Master: op=Shutter serial=220609 11:57:16 Shutter LASER close 11:57:16 Received message from Camera: op=State serial=220611 11:57:16 GetSingleValue result=40 Value=cccccccc 11:57:16 SkyScan query 11:57:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:57:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:17 Parameters OK 11:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:17 Set A/D data flow result=40 11:57:17 Set A/D channel type result=40 11:57:17 Set A/D encoding result=40 11:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:17 Set channel filter=0.000000e+000 result=40 11:57:17 Config A/D Result=40 11:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:17 Get A/D filter: -9.255963e+061 result=40 11:57:17 Get A/D value=-858993460 result=40 11:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:17 Parameters OK 11:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:17 Set A/D data flow result=40 11:57:17 Set A/D channel type result=40 11:57:17 Set A/D encoding result=40 11:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:17 Set channel filter=0.000000e+000 result=40 11:57:17 Config A/D Result=40 11:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:17 Get A/D filter: -9.255963e+061 result=40 11:57:17 Get A/D value=-858993460 result=40 11:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:17 Aux= 11:57:17 Message to Camera, serial 220611 queued 11:57:53 Received message from Master: op=PointingHead serial=220624 11:57:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:57:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:57:54 Point started: ret=0 11:57:54 point_skyscan result=0 11:57:55 Check angles 11:57:55 SkyScan query 11:57:55 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.72<-13448 Statuses=0009 0009 11:57:55 Msec=0 True Az=152.94 Ze=-21.72 Az status=0009 Ze status=0009 11:57:55 Check angles 11:57:55 SkyScan query 11:57:56 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.705<-12047 Statuses=0009 0009 11:57:56 Msec=750 True Az=135.405 Ze=-0.705 Az status=0009 Ze status=0009 11:57:56 Check angles 11:57:56 SkyScan query 11:57:57 SkyScan query done: ret=0 az=118.02<-7868 ze=20.205<-10653 Statuses=0009 0009 11:57:57 Msec=1500 True Az=118.02 Ze=20.205 Az status=0009 Ze status=0009 11:57:57 Check angles 11:57:57 SkyScan query 11:57:57 SkyScan query done: ret=0 az=100.605<-6707 ze=41.205<-9253 Statuses=0009 0009 11:57:57 Msec=2250 True Az=100.605 Ze=41.205 Az status=0009 Ze status=0009 11:57:58 Check angles 11:57:58 SkyScan query 11:57:58 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 11:57:58 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 11:57:58 Check angles 11:57:58 SkyScan query 11:57:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:57:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:57:59 Message to Master queued w/err=0: serial=220624 error=0 11:58:04 Received message from Master: op=Filter serial=220625 11:58:04 Color wheel filter change from 0 to 0 11:58:04 FLIGetFilterPos err=0 currentPosition=0 11:58:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:04 Filter is already there-color wheel unchanged 11:58:04 Received message from Master: op=Shutter serial=220626 11:58:04 Shutter LASER close 11:58:04 Received message from Camera: op=State serial=220628 11:58:04 GetSingleValue result=40 Value=cccccccc 11:58:04 SkyScan query 11:58:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:58:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:05 Parameters OK 11:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:05 Set A/D data flow result=40 11:58:05 Set A/D channel type result=40 11:58:05 Set A/D encoding result=40 11:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:05 Set channel filter=0.000000e+000 result=40 11:58:05 Config A/D Result=40 11:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:05 Get A/D filter: -9.255963e+061 result=40 11:58:05 Get A/D value=-858993460 result=40 11:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:05 Parameters OK 11:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:05 Set A/D data flow result=40 11:58:05 Set A/D channel type result=40 11:58:05 Set A/D encoding result=40 11:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:05 Set channel filter=0.000000e+000 result=40 11:58:05 Config A/D Result=40 11:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:05 Get A/D filter: -9.255963e+061 result=40 11:58:05 Get A/D value=-858993460 result=40 11:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:05 Aux= 11:58:05 Message to Camera, serial 220628 queued 11:58:42 Received message from Master: op=PointingHead serial=220641 11:58:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:58:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:58:42 Point started: ret=0 11:58:42 point_skyscan result=0 11:58:43 Check angles 11:58:43 SkyScan query 11:58:43 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 11:58:43 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 11:58:43 Check angles 11:58:43 SkyScan query 11:58:44 SkyScan query done: ret=0 az=126.405<-8427 ze=38.49<-9434 Statuses=0009 0008 11:58:44 Msec=750 True Az=126.405 Ze=38.49 Az status=0009 Ze status=0008 11:58:44 Check angles 11:58:44 SkyScan query 11:58:45 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 11:58:45 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 11:58:45 Check angles 11:58:45 SkyScan query 11:58:45 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 11:58:45 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 11:58:46 Check angles 11:58:46 SkyScan query 11:58:46 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:58:46 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:58:46 Check angles 11:58:46 SkyScan query 11:58:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:58:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:58:47 Message to Master queued w/err=0: serial=220641 error=0 11:58:52 Received message from Master: op=Filter serial=220642 11:58:52 Color wheel filter change from 0 to 0 11:58:52 FLIGetFilterPos err=0 currentPosition=0 11:58:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:52 Filter is already there-color wheel unchanged 11:58:52 Received message from Master: op=Shutter serial=220643 11:58:52 Shutter LASER close 11:58:52 Received message from Camera: op=State serial=220645 11:58:52 GetSingleValue result=40 Value=cccccccc 11:58:52 SkyScan query 11:58:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:58:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:53 Parameters OK 11:58:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:53 Set A/D data flow result=40 11:58:53 Set A/D channel type result=40 11:58:53 Set A/D encoding result=40 11:58:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:53 Set channel filter=0.000000e+000 result=40 11:58:53 Config A/D Result=40 11:58:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:53 Get A/D filter: -9.255963e+061 result=40 11:58:53 Get A/D value=-858993460 result=40 11:58:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:53 Parameters OK 11:58:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:53 Set A/D data flow result=40 11:58:53 Set A/D channel type result=40 11:58:53 Set A/D encoding result=40 11:58:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:53 Set channel filter=0.000000e+000 result=40 11:58:53 Config A/D Result=40 11:58:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:53 Get A/D filter: -9.255963e+061 result=40 11:58:53 Get A/D value=-858993460 result=40 11:58:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:53 Aux= 11:58:53 Message to Camera, serial 220645 queued 11:59:30 Received message from Master: op=PointingHead serial=220658 11:59:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:59:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:59:30 Point started: ret=0 11:59:30 point_skyscan result=0 11:59:31 Check angles 11:59:31 SkyScan query 11:59:31 SkyScan query done: ret=0 az=152.955<-10197 ze=8.64<-11424 Statuses=0009 0009 11:59:31 Msec=0 True Az=152.955 Ze=8.64 Az status=0009 Ze status=0009 11:59:31 Check angles 11:59:31 SkyScan query 11:59:32 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.285<-12819 Statuses=0009 0009 11:59:32 Msec=750 True Az=135.42 Ze=-12.285 Az status=0009 Ze status=0009 11:59:32 Check angles 11:59:32 SkyScan query 11:59:33 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.69<-14246 Statuses=0009 0009 11:59:33 Msec=1500 True Az=117.57 Ze=-33.69 Az status=0009 Ze status=0009 11:59:33 Check angles 11:59:33 SkyScan query 11:59:34 SkyScan query done: ret=0 az=99.885<-6659 ze=-51.57<-15438 Statuses=0009 0009 11:59:34 Msec=2250 True Az=99.885 Ze=-51.57 Az status=0009 Ze status=0009 11:59:34 Check angles 11:59:34 SkyScan query 11:59:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:59:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:59:34 Check angles 11:59:34 SkyScan query 11:59:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:59:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:59:35 Message to Master queued w/err=0: serial=220658 error=0 11:59:40 Received message from Master: op=Filter serial=220659 11:59:40 Color wheel filter change from 0 to 0 11:59:40 FLIGetFilterPos err=0 currentPosition=0 11:59:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:40 Filter is already there-color wheel unchanged 11:59:40 Received message from Master: op=Shutter serial=220660 11:59:40 Shutter LASER close 11:59:40 Received message from Camera: op=State serial=220662 11:59:40 GetSingleValue result=40 Value=cccccccc 11:59:40 SkyScan query 11:59:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:59:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:41 Parameters OK 11:59:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:41 Set A/D data flow result=40 11:59:41 Set A/D channel type result=40 11:59:41 Set A/D encoding result=40 11:59:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:41 Set channel filter=0.000000e+000 result=40 11:59:41 Config A/D Result=40 11:59:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:41 Get A/D filter: -9.255963e+061 result=40 11:59:41 Get A/D value=-858993460 result=40 11:59:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:41 Parameters OK 11:59:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:41 Set A/D data flow result=40 11:59:41 Set A/D channel type result=40 11:59:41 Set A/D encoding result=40 11:59:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:41 Set channel filter=0.000000e+000 result=40 11:59:41 Config A/D Result=40 11:59:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:41 Get A/D filter: -9.255963e+061 result=40 11:59:41 Get A/D value=-858993460 result=40 11:59:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:41 Aux= 11:59:41 Message to Camera, serial 220662 queued 12:00:17 Received message from Master: op=PointingHead serial=220674 12:00:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:00:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:00:17 Point started: ret=0 12:00:17 point_skyscan result=0 12:00:18 Check angles 12:00:18 SkyScan query 12:00:18 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.09<-17406 Statuses=0009 0009 12:00:18 Msec=0 True Az=108.87 Ze=-81.09 Az status=0009 Ze status=0009 12:00:19 Check angles 12:00:19 SkyScan query 12:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 12:00:19 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 12:00:19 Check angles 12:00:19 SkyScan query 12:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 12:00:20 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 12:00:20 Check angles 12:00:20 SkyScan query 12:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.84<-21656 Statuses=0008 0009 12:00:21 Msec=2250 True Az=112.995 Ze=-144.84 Az status=0008 Ze status=0009 12:00:21 Check angles 12:00:21 SkyScan query 12:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.23<-23082 Statuses=0008 0009 12:00:21 Msec=3000 True Az=112.995 Ze=-166.23 Az status=0008 Ze status=0009 12:00:22 Check angles 12:00:22 SkyScan query 12:00:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:00:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:00:22 Message to Master queued w/err=0: serial=220674 error=0 12:00:27 Received message from Master: op=Filter serial=220675 12:00:27 Color wheel filter change from 0 to 0 12:00:27 FLIGetFilterPos err=0 currentPosition=0 12:00:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:27 Filter is already there-color wheel unchanged 12:00:27 Received message from Master: op=Shutter serial=220676 12:00:27 Shutter LASER open 12:00:28 Received message from Camera: op=State serial=220678 12:00:28 GetSingleValue result=40 Value=cccccccc 12:00:28 SkyScan query 12:00:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:00:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:28 Parameters OK 12:00:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:28 Set A/D data flow result=40 12:00:28 Set A/D channel type result=40 12:00:28 Set A/D encoding result=40 12:00:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:28 Set channel filter=0.000000e+000 result=40 12:00:28 Config A/D Result=40 12:00:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:28 Get A/D filter: -9.255963e+061 result=40 12:00:28 Get A/D value=-858993460 result=40 12:00:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:28 Parameters OK 12:00:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:28 Set A/D data flow result=40 12:00:28 Set A/D channel type result=40 12:00:28 Set A/D encoding result=40 12:00:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:28 Set channel filter=0.000000e+000 result=40 12:00:28 Config A/D Result=40 12:00:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:28 Get A/D filter: -9.255963e+061 result=40 12:00:28 Get A/D value=-858993460 result=40 12:00:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:28 Aux= 12:00:28 Message to Camera, serial 220678 queued 12:00:36 Received message from Master: op=Shutter serial=220687 12:00:36 Shutter LASER close 12:00:36 Received message from Master: op=PointingHead serial=220691 12:00:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:00:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:00:36 Point started: ret=0 12:00:36 point_skyscan result=0 12:00:37 Check angles 12:00:37 SkyScan query 12:00:38 SkyScan query done: ret=0 az=89.76<-5984 ze=157.215<-1519 Statuses=0009 0009 12:00:38 Msec=0 True Az=89.76 Ze=157.215 Az status=0009 Ze status=0009 12:00:38 Check angles 12:00:38 SkyScan query 12:00:39 SkyScan query done: ret=0 az=72.405<-4827 ze=136.2<-2920 Statuses=0009 0009 12:00:39 Msec=750 True Az=72.405 Ze=136.2 Az status=0009 Ze status=0009 12:00:39 Check angles 12:00:39 SkyScan query 12:00:39 SkyScan query done: ret=0 az=55.05<-3670 ze=115.32<-4312 Statuses=0009 0009 12:00:39 Msec=1500 True Az=55.05 Ze=115.32 Az status=0009 Ze status=0009 12:00:39 Check angles 12:00:39 SkyScan query 12:00:40 SkyScan query done: ret=0 az=40.89<-2726 ze=94.35<-5710 Statuses=0009 0009 12:00:40 Msec=2250 True Az=40.89 Ze=94.35 Az status=0009 Ze status=0009 12:00:40 Check angles 12:00:40 SkyScan query 12:00:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.41<-7106 Statuses=0008 0009 12:00:41 Msec=3000 True Az=40.995 Ze=73.41 Az status=0008 Ze status=0009 12:00:41 Check angles 12:00:41 SkyScan query 12:00:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 12:00:42 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 12:00:42 Check angles 12:00:42 SkyScan query 12:00:42 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 12:00:42 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 12:00:42 Message to Master queued w/err=0: serial=220691 error=0 12:00:47 Received message from Master: op=Filter serial=220692 12:00:47 Color wheel filter change from 0 to 0 12:00:47 FLIGetFilterPos err=0 currentPosition=0 12:00:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:47 Filter is already there-color wheel unchanged 12:00:47 Received message from Master: op=Shutter serial=220693 12:00:47 Shutter LASER close 12:00:48 Received message from Camera: op=State serial=220695 12:00:48 GetSingleValue result=40 Value=cccccccc 12:00:48 SkyScan query 12:00:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:00:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:48 Parameters OK 12:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:48 Set A/D data flow result=40 12:00:48 Set A/D channel type result=40 12:00:48 Set A/D encoding result=40 12:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:48 Set channel filter=0.000000e+000 result=40 12:00:48 Config A/D Result=40 12:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:48 Get A/D filter: -9.255963e+061 result=40 12:00:48 Get A/D value=-858993460 result=40 12:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:48 Parameters OK 12:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:48 Set A/D data flow result=40 12:00:48 Set A/D channel type result=40 12:00:48 Set A/D encoding result=40 12:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:48 Set channel filter=0.000000e+000 result=40 12:00:48 Config A/D Result=40 12:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:48 Get A/D filter: -9.255963e+061 result=40 12:00:48 Get A/D value=-858993460 result=40 12:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:48 Aux= 12:00:48 Message to Camera, serial 220695 queued 12:01:25 Received message from Master: op=PointingHead serial=220708 12:01:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:01:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:01:25 Point started: ret=0 12:01:25 point_skyscan result=0 12:01:26 Check angles 12:01:26 SkyScan query 12:01:27 SkyScan query done: ret=0 az=64.08<-4272 ze=66.54<-7564 Statuses=0009 0008 12:01:27 Msec=0 True Az=64.08 Ze=66.54 Az status=0009 Ze status=0008 12:01:27 Check angles 12:01:27 SkyScan query 12:01:27 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 12:01:27 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 12:01:28 Check angles 12:01:28 SkyScan query 12:01:28 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 12:01:28 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 12:01:28 Check angles 12:01:28 SkyScan query 12:01:29 SkyScan query done: ret=0 az=116.805<-7787 ze=66.495<-7567 Statuses=0009 0008 12:01:29 Msec=2250 True Az=116.805 Ze=66.495 Az status=0009 Ze status=0008 12:01:29 Check angles 12:01:29 SkyScan query 12:01:30 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 12:01:30 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 12:01:30 Check angles 12:01:30 SkyScan query 12:01:30 SkyScan query done: ret=0 az=152.055<-10137 ze=66.495<-7567 Statuses=0009 0008 12:01:30 Msec=3750 True Az=152.055 Ze=66.495 Az status=0009 Ze status=0008 12:01:31 Check angles 12:01:31 SkyScan query 12:01:31 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:01:31 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:01:31 Message to Master queued w/err=0: serial=220708 error=0 12:01:36 Received message from Master: op=Filter serial=220709 12:01:36 Color wheel filter change from 0 to 0 12:01:36 FLIGetFilterPos err=0 currentPosition=0 12:01:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:36 Filter is already there-color wheel unchanged 12:01:36 Received message from Master: op=Shutter serial=220710 12:01:36 Shutter LASER close 12:01:36 Received message from Camera: op=State serial=220712 12:01:36 GetSingleValue result=40 Value=cccccccc 12:01:36 SkyScan query 12:01:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:01:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:37 Parameters OK 12:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:37 Set A/D data flow result=40 12:01:37 Set A/D channel type result=40 12:01:37 Set A/D encoding result=40 12:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:37 Set channel filter=0.000000e+000 result=40 12:01:37 Config A/D Result=40 12:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:37 Get A/D filter: -9.255963e+061 result=40 12:01:37 Get A/D value=-858993460 result=40 12:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:37 Parameters OK 12:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:37 Set A/D data flow result=40 12:01:37 Set A/D channel type result=40 12:01:37 Set A/D encoding result=40 12:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:37 Set channel filter=0.000000e+000 result=40 12:01:37 Config A/D Result=40 12:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:37 Get A/D filter: -9.255963e+061 result=40 12:01:37 Get A/D value=-858993460 result=40 12:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:37 Aux= 12:01:37 Message to Camera, serial 220712 queued 12:02:14 Received message from Master: op=PointingHead serial=220725 12:02:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:02:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:02:14 Point started: ret=0 12:02:14 point_skyscan result=0 12:02:15 Check angles 12:02:15 SkyScan query 12:02:16 SkyScan query done: ret=0 az=134.805<-8987 ze=36.6<-9560 Statuses=0009 0009 12:02:16 Msec=0 True Az=134.805 Ze=36.6 Az status=0009 Ze status=0009 12:02:16 Check angles 12:02:16 SkyScan query 12:02:16 SkyScan query done: ret=0 az=117.3<-7820 ze=15.66<-10956 Statuses=0009 0009 12:02:16 Msec=750 True Az=117.3 Ze=15.66 Az status=0009 Ze status=0009 12:02:16 Check angles 12:02:16 SkyScan query 12:02:17 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.31<-12354 Statuses=0009 0009 12:02:17 Msec=1500 True Az=99.945 Ze=-5.31 Az status=0009 Ze status=0009 12:02:17 Check angles 12:02:17 SkyScan query 12:02:18 SkyScan query done: ret=0 az=82.5<-5500 ze=-26.265<-13751 Statuses=0009 0009 12:02:18 Msec=2250 True Az=82.5 Ze=-26.265 Az status=0009 Ze status=0009 12:02:18 Check angles 12:02:18 SkyScan query 12:02:19 SkyScan query done: ret=0 az=65.07<-4338 ze=-38.58<-14572 Statuses=0009 0008 12:02:19 Msec=3000 True Az=65.07 Ze=-38.58 Az status=0009 Ze status=0008 12:02:19 Check angles 12:02:19 SkyScan query 12:02:19 SkyScan query done: ret=0 az=47.595<-3173 ze=-38.52<-14568 Statuses=0009 0008 12:02:19 Msec=3750 True Az=47.595 Ze=-38.52 Az status=0009 Ze status=0008 12:02:19 Check angles 12:02:19 SkyScan query 12:02:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:02:20 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:02:20 Message to Master queued w/err=0: serial=220725 error=0 12:02:25 Received message from Master: op=Filter serial=220726 12:02:25 Color wheel filter change from 0 to 0 12:02:25 FLIGetFilterPos err=0 currentPosition=0 12:02:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:25 Filter is already there-color wheel unchanged 12:02:25 Received message from Master: op=Shutter serial=220727 12:02:25 Shutter LASER close 12:02:25 Received message from Camera: op=State serial=220729 12:02:25 GetSingleValue result=40 Value=cccccccc 12:02:25 SkyScan query 12:02:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:02:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:26 Parameters OK 12:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:26 Set A/D data flow result=40 12:02:26 Set A/D channel type result=40 12:02:26 Set A/D encoding result=40 12:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:26 Set channel filter=0.000000e+000 result=40 12:02:26 Config A/D Result=40 12:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:26 Get A/D filter: -9.255963e+061 result=40 12:02:26 Get A/D value=-858993460 result=40 12:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:26 Parameters OK 12:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:26 Set A/D data flow result=40 12:02:26 Set A/D channel type result=40 12:02:26 Set A/D encoding result=40 12:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:26 Set channel filter=0.000000e+000 result=40 12:02:26 Config A/D Result=40 12:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:26 Get A/D filter: -9.255963e+061 result=40 12:02:26 Get A/D value=-858993460 result=40 12:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:26 Aux= 12:02:26 Message to Camera, serial 220729 queued 12:03:03 Received message from Master: op=PointingHead serial=220742 12:03:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:03:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:03:03 Point started: ret=0 12:03:03 point_skyscan result=0 12:03:04 Check angles 12:03:04 SkyScan query 12:03:04 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.04<-16536 Statuses=0009 0009 12:03:04 Msec=0 True Az=63.81 Ze=-68.04 Az status=0009 Ze status=0009 12:03:04 Check angles 12:03:04 SkyScan query 12:03:05 SkyScan query done: ret=0 az=81.15<-5410 ze=-89.04<-17936 Statuses=0009 0009 12:03:05 Msec=750 True Az=81.15 Ze=-89.04 Az status=0009 Ze status=0009 12:03:05 Check angles 12:03:05 SkyScan query 12:03:06 SkyScan query done: ret=0 az=98.715<-6581 ze=-109.965<-19331 Statuses=0009 0009 12:03:06 Msec=1500 True Az=98.715 Ze=-109.965 Az status=0009 Ze status=0009 12:03:06 Check angles 12:03:06 SkyScan query 12:03:07 SkyScan query done: ret=0 az=116.175<-7745 ze=-130.935<-20729 Statuses=0009 0009 12:03:07 Msec=2250 True Az=116.175 Ze=-130.935 Az status=0009 Ze status=0009 12:03:07 Check angles 12:03:07 SkyScan query 12:03:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 12:03:07 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 12:03:07 Check angles 12:03:07 SkyScan query 12:03:08 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:03:08 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:03:08 Message to Master queued w/err=0: serial=220742 error=0 12:03:13 Received message from Master: op=Filter serial=220743 12:03:13 Color wheel filter change from 0 to 0 12:03:13 FLIGetFilterPos err=0 currentPosition=0 12:03:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:13 Filter is already there-color wheel unchanged 12:03:13 Received message from Master: op=Shutter serial=220744 12:03:13 Shutter LASER close 12:03:13 Received message from Camera: op=State serial=220746 12:03:13 GetSingleValue result=40 Value=cccccccc 12:03:13 SkyScan query 12:03:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:03:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:14 Parameters OK 12:03:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:14 Set A/D data flow result=40 12:03:14 Set A/D channel type result=40 12:03:14 Set A/D encoding result=40 12:03:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:14 Set channel filter=0.000000e+000 result=40 12:03:14 Config A/D Result=40 12:03:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:14 Get A/D filter: -9.255963e+061 result=40 12:03:14 Get A/D value=-858993460 result=40 12:03:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:14 Parameters OK 12:03:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:14 Set A/D data flow result=40 12:03:14 Set A/D channel type result=40 12:03:14 Set A/D encoding result=40 12:03:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:14 Set channel filter=0.000000e+000 result=40 12:03:14 Config A/D Result=40 12:03:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:14 Get A/D filter: -9.255963e+061 result=40 12:03:14 Get A/D value=-858993460 result=40 12:03:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:14 Aux= 12:03:14 Message to Camera, serial 220746 queued 12:03:51 Received message from Master: op=PointingHead serial=220759 12:03:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:03:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:03:51 Point started: ret=0 12:03:51 point_skyscan result=0 12:03:52 Check angles 12:03:52 SkyScan query 12:03:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 12:03:52 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 12:03:53 Check angles 12:03:53 SkyScan query 12:03:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:03:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:03:53 Message to Master queued w/err=0: serial=220759 error=0 12:03:58 Received message from Master: op=Filter serial=220760 12:03:58 Color wheel filter change from 0 to 0 12:03:58 FLIGetFilterPos err=0 currentPosition=0 12:03:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:58 Filter is already there-color wheel unchanged 12:03:58 Received message from Master: op=Shutter serial=220761 12:03:58 Shutter LASER open 12:03:58 Received message from Camera: op=State serial=220763 12:03:58 GetSingleValue result=40 Value=cccccccc 12:03:58 SkyScan query 12:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:03:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:59 Parameters OK 12:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:59 Set A/D data flow result=40 12:03:59 Set A/D channel type result=40 12:03:59 Set A/D encoding result=40 12:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:59 Set channel filter=0.000000e+000 result=40 12:03:59 Config A/D Result=40 12:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:59 Get A/D filter: -9.255963e+061 result=40 12:03:59 Get A/D value=-858993460 result=40 12:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:59 Parameters OK 12:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:59 Set A/D data flow result=40 12:03:59 Set A/D channel type result=40 12:03:59 Set A/D encoding result=40 12:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:59 Set channel filter=0.000000e+000 result=40 12:03:59 Config A/D Result=40 12:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:59 Get A/D filter: -9.255963e+061 result=40 12:03:59 Get A/D value=-858993460 result=40 12:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:59 Aux= 12:03:59 Message to Camera, serial 220763 queued 12:04:07 Received message from Master: op=Shutter serial=220773 12:04:07 Shutter LASER close 12:04:08 Received message from Master: op=PointingHead serial=220777 12:04:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:04:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:04:08 Point started: ret=0 12:04:08 point_skyscan result=0 12:04:09 Check angles 12:04:09 SkyScan query 12:04:10 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.415<-21561 Statuses=0009 0009 12:04:10 Msec=0 True Az=135.825 Ze=-143.415 Az status=0009 Ze status=0009 12:04:10 Check angles 12:04:10 SkyScan query 12:04:11 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.385<-20159 Statuses=0009 0009 12:04:11 Msec=750 True Az=153.36 Ze=-122.385 Az status=0009 Ze status=0009 12:04:11 Check angles 12:04:11 SkyScan query 12:04:11 SkyScan query done: ret=0 az=170.79<-11386 ze=-101.55<-18770 Statuses=0009 0009 12:04:11 Msec=1500 True Az=170.79 Ze=-101.55 Az status=0009 Ze status=0009 12:04:11 Check angles 12:04:11 SkyScan query 12:04:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.52<-17368 Statuses=0008 0009 12:04:12 Msec=2250 True Az=175.995 Ze=-80.52 Az status=0008 Ze status=0009 12:04:12 Check angles 12:04:12 SkyScan query 12:04:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.58<-15972 Statuses=0008 0009 12:04:13 Msec=3000 True Az=175.995 Ze=-59.58 Az status=0008 Ze status=0009 12:04:13 Check angles 12:04:13 SkyScan query 12:04:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:04:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:04:14 Message to Master queued w/err=0: serial=220777 error=0 12:04:19 Received message from Master: op=Filter serial=220778 12:04:19 Color wheel filter change from 0 to 0 12:04:19 FLIGetFilterPos err=0 currentPosition=0 12:04:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:19 Filter is already there-color wheel unchanged 12:04:19 Received message from Master: op=Shutter serial=220779 12:04:19 Shutter LASER close 12:04:19 Received message from Camera: op=State serial=220781 12:04:19 GetSingleValue result=40 Value=cccccccc 12:04:19 SkyScan query 12:04:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:04:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:19 Parameters OK 12:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:19 Set A/D data flow result=40 12:04:19 Set A/D channel type result=40 12:04:19 Set A/D encoding result=40 12:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:19 Set channel filter=0.000000e+000 result=40 12:04:19 Config A/D Result=40 12:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:19 Get A/D filter: -9.255963e+061 result=40 12:04:19 Get A/D value=-858993460 result=40 12:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:19 Parameters OK 12:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:19 Set A/D data flow result=40 12:04:19 Set A/D channel type result=40 12:04:19 Set A/D encoding result=40 12:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:19 Set channel filter=0.000000e+000 result=40 12:04:19 Config A/D Result=40 12:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:19 Get A/D filter: -9.255963e+061 result=40 12:04:19 Get A/D value=-858993460 result=40 12:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:19 Aux= 12:04:19 Message to Camera, serial 220781 queued 12:04:56 Received message from Master: op=PointingHead serial=220794 12:04:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:04:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:04:57 Point started: ret=0 12:04:57 point_skyscan result=0 12:04:57 Check angles 12:04:57 SkyScan query 12:04:58 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.36<-13424 Statuses=0009 0009 12:04:58 Msec=0 True Az=152.715 Ze=-21.36 Az status=0009 Ze status=0009 12:04:58 Check angles 12:04:58 SkyScan query 12:04:59 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.39<-12026 Statuses=0009 0009 12:04:59 Msec=750 True Az=135.3 Ze=-0.39 Az status=0009 Ze status=0009 12:04:59 Check angles 12:04:59 SkyScan query 12:04:59 SkyScan query done: ret=0 az=117.6<-7840 ze=20.55<-10630 Statuses=0009 0009 12:04:59 Msec=1500 True Az=117.6 Ze=20.55 Az status=0009 Ze status=0009 12:05:00 Check angles 12:05:00 SkyScan query 12:05:00 SkyScan query done: ret=0 az=100.395<-6693 ze=41.52<-9232 Statuses=0009 0009 12:05:00 Msec=2250 True Az=100.395 Ze=41.52 Az status=0009 Ze status=0009 12:05:00 Check angles 12:05:00 SkyScan query 12:05:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 12:05:01 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 12:05:01 Check angles 12:05:01 SkyScan query 12:05:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:05:02 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:05:02 Message to Master queued w/err=0: serial=220794 error=0 12:05:07 Received message from Master: op=Filter serial=220795 12:05:07 Color wheel filter change from 0 to 0 12:05:07 FLIGetFilterPos err=0 currentPosition=0 12:05:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:07 Filter is already there-color wheel unchanged 12:05:07 Received message from Master: op=Shutter serial=220796 12:05:07 Shutter LASER close 12:05:07 Received message from Camera: op=State serial=220798 12:05:07 GetSingleValue result=40 Value=cccccccc 12:05:07 SkyScan query 12:05:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:05:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:08 Parameters OK 12:05:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:08 Set A/D data flow result=40 12:05:08 Set A/D channel type result=40 12:05:08 Set A/D encoding result=40 12:05:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:08 Set channel filter=0.000000e+000 result=40 12:05:08 Config A/D Result=40 12:05:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:08 Get A/D filter: -9.255963e+061 result=40 12:05:08 Get A/D value=-858993460 result=40 12:05:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:08 Parameters OK 12:05:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:08 Set A/D data flow result=40 12:05:08 Set A/D channel type result=40 12:05:08 Set A/D encoding result=40 12:05:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:08 Set channel filter=0.000000e+000 result=40 12:05:08 Config A/D Result=40 12:05:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:08 Get A/D filter: -9.255963e+061 result=40 12:05:08 Get A/D value=-858993460 result=40 12:05:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:08 Aux= 12:05:08 Message to Camera, serial 220798 queued 12:05:44 Received message from Master: op=PointingHead serial=220811 12:05:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:05:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:05:45 Point started: ret=0 12:05:45 point_skyscan result=0 12:05:46 Check angles 12:05:46 SkyScan query 12:05:46 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 12:05:46 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 12:05:46 Check angles 12:05:46 SkyScan query 12:05:47 SkyScan query done: ret=0 az=127.185<-8479 ze=38.505<-9433 Statuses=0009 0008 12:05:47 Msec=750 True Az=127.185 Ze=38.505 Az status=0009 Ze status=0008 12:05:47 Check angles 12:05:47 SkyScan query 12:05:48 SkyScan query done: ret=0 az=144.66<-9644 ze=38.505<-9433 Statuses=0009 0008 12:05:48 Msec=1500 True Az=144.66 Ze=38.505 Az status=0009 Ze status=0008 12:05:48 Check angles 12:05:48 SkyScan query [UTC 2018-12-17 12:05:48] 12:05:48 SkyScan query done: ret=0 az=162.03<-10802 ze=38.505<-9433 Statuses=0009 0008 12:05:48 Msec=2250 True Az=162.03 Ze=38.505 Az status=0009 Ze status=0008 12:05:49 Check angles 12:05:49 SkyScan query 12:05:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:05:49 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:05:49 Check angles 12:05:49 SkyScan query 12:05:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:05:50 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:05:50 Message to Master queued w/err=0: serial=220811 error=0 12:05:55 Received message from Master: op=Filter serial=220812 12:05:55 Color wheel filter change from 0 to 0 12:05:55 FLIGetFilterPos err=0 currentPosition=0 12:05:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:55 Filter is already there-color wheel unchanged 12:05:55 Received message from Master: op=Shutter serial=220813 12:05:55 Shutter LASER close 12:05:55 Received message from Camera: op=State serial=220815 12:05:55 GetSingleValue result=40 Value=cccccccc 12:05:55 SkyScan query 12:05:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:05:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:56 Parameters OK 12:05:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:56 Set A/D data flow result=40 12:05:56 Set A/D channel type result=40 12:05:56 Set A/D encoding result=40 12:05:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:56 Set channel filter=0.000000e+000 result=40 12:05:56 Config A/D Result=40 12:05:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:56 Get A/D filter: -9.255963e+061 result=40 12:05:56 Get A/D value=-858993460 result=40 12:05:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:56 Parameters OK 12:05:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:56 Set A/D data flow result=40 12:05:56 Set A/D channel type result=40 12:05:56 Set A/D encoding result=40 12:05:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:56 Set channel filter=0.000000e+000 result=40 12:05:56 Config A/D Result=40 12:05:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:56 Get A/D filter: -9.255963e+061 result=40 12:05:56 Get A/D value=-858993460 result=40 12:05:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:56 Aux= 12:05:56 Message to Camera, serial 220815 queued 12:06:33 Received message from Master: op=PointingHead serial=220828 12:06:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:06:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:06:33 Point started: ret=0 12:06:33 point_skyscan result=0 12:06:34 Check angles 12:06:34 SkyScan query 12:06:34 SkyScan query done: ret=0 az=152.67<-10178 ze=8.175<-11455 Statuses=0009 0009 12:06:34 Msec=0 True Az=152.67 Ze=8.175 Az status=0009 Ze status=0009 12:06:34 Check angles 12:06:34 SkyScan query 12:06:35 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.72<-12848 Statuses=0009 0009 12:06:35 Msec=750 True Az=135.135 Ze=-12.72 Az status=0009 Ze status=0009 12:06:35 Check angles 12:06:35 SkyScan query 12:06:36 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.69<-14246 Statuses=0009 0009 12:06:36 Msec=1500 True Az=117.63 Ze=-33.69 Az status=0009 Ze status=0009 12:06:36 Check angles 12:06:36 SkyScan query 12:06:36 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.555<-15437 Statuses=0009 0009 12:06:36 Msec=2250 True Az=100.26 Ze=-51.555 Az status=0009 Ze status=0009 12:06:37 Check angles 12:06:37 SkyScan query 12:06:37 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 12:06:37 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 12:06:37 Check angles 12:06:37 SkyScan query 12:06:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:06:38 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:06:38 Message to Master queued w/err=0: serial=220828 error=0 12:06:43 Received message from Master: op=Filter serial=220829 12:06:43 Color wheel filter change from 0 to 0 12:06:43 FLIGetFilterPos err=0 currentPosition=0 12:06:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:43 Filter is already there-color wheel unchanged 12:06:43 Received message from Master: op=Shutter serial=220830 12:06:43 Shutter LASER close 12:06:43 Received message from Camera: op=State serial=220832 12:06:43 GetSingleValue result=40 Value=cccccccc 12:06:43 SkyScan query 12:06:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:06:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:44 Parameters OK 12:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:44 Set A/D data flow result=40 12:06:44 Set A/D channel type result=40 12:06:44 Set A/D encoding result=40 12:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:44 Set channel filter=0.000000e+000 result=40 12:06:44 Config A/D Result=40 12:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:44 Get A/D filter: -9.255963e+061 result=40 12:06:44 Get A/D value=-858993460 result=40 12:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:44 Parameters OK 12:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:44 Set A/D data flow result=40 12:06:44 Set A/D channel type result=40 12:06:44 Set A/D encoding result=40 12:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:44 Set channel filter=0.000000e+000 result=40 12:06:44 Config A/D Result=40 12:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:44 Get A/D filter: -9.255963e+061 result=40 12:06:44 Get A/D value=-858993460 result=40 12:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:44 Aux= 12:06:44 Message to Camera, serial 220832 queued 12:07:21 Received message from Master: op=PointingHead serial=220845 12:07:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:07:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:07:21 Point started: ret=0 12:07:21 point_skyscan result=0 12:07:22 Check angles 12:07:22 SkyScan query 12:07:22 SkyScan query done: ret=0 az=109.44<-7296 ze=-81.885<-17459 Statuses=0009 0009 12:07:22 Msec=0 True Az=109.44 Ze=-81.885 Az status=0009 Ze status=0009 12:07:22 Check angles 12:07:22 SkyScan query 12:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.81<-18854 Statuses=0008 0009 12:07:23 Msec=750 True Az=112.995 Ze=-102.81 Az status=0008 Ze status=0009 12:07:23 Check angles 12:07:23 SkyScan query 12:07:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 12:07:24 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 12:07:24 Check angles 12:07:24 SkyScan query 12:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 12:07:25 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 12:07:25 Check angles 12:07:25 SkyScan query 12:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 12:07:25 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 12:07:25 Check angles 12:07:25 SkyScan query 12:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:07:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:07:26 Message to Master queued w/err=0: serial=220845 error=0 12:07:31 Received message from Master: op=Filter serial=220846 12:07:31 Color wheel filter change from 0 to 0 12:07:31 FLIGetFilterPos err=0 currentPosition=0 12:07:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:31 Filter is already there-color wheel unchanged 12:07:31 Received message from Master: op=Shutter serial=220847 12:07:31 Shutter LASER open 12:07:31 Received message from Camera: op=State serial=220849 12:07:31 GetSingleValue result=40 Value=cccccccc 12:07:31 SkyScan query 12:07:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:07:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:32 Parameters OK 12:07:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:32 Set A/D data flow result=40 12:07:32 Set A/D channel type result=40 12:07:32 Set A/D encoding result=40 12:07:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:32 Set channel filter=0.000000e+000 result=40 12:07:32 Config A/D Result=40 12:07:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:32 Get A/D filter: -9.255963e+061 result=40 12:07:32 Get A/D value=-858993460 result=40 12:07:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:32 Parameters OK 12:07:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:32 Set A/D data flow result=40 12:07:32 Set A/D channel type result=40 12:07:32 Set A/D encoding result=40 12:07:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:32 Set channel filter=0.000000e+000 result=40 12:07:32 Config A/D Result=40 12:07:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:32 Get A/D filter: -9.255963e+061 result=40 12:07:32 Get A/D value=-858993460 result=40 12:07:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:32 Aux= 12:07:32 Message to Camera, serial 220849 queued 12:07:40 Received message from Master: op=Shutter serial=220859 12:07:40 Shutter LASER close 12:07:41 Received message from Master: op=PointingHead serial=220863 12:07:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:07:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:07:41 Point started: ret=0 12:07:41 point_skyscan result=0 12:07:42 Check angles 12:07:42 SkyScan query 12:07:43 SkyScan query done: ret=0 az=90.195<-6013 ze=157.53<-1498 Statuses=0009 0009 12:07:43 Msec=0 True Az=90.195 Ze=157.53 Az status=0009 Ze status=0009 12:07:43 Check angles 12:07:43 SkyScan query 12:07:43 SkyScan query done: ret=0 az=72.72<-4848 ze=136.545<-2897 Statuses=0009 0009 12:07:43 Msec=750 True Az=72.72 Ze=136.545 Az status=0009 Ze status=0009 12:07:43 Check angles 12:07:43 SkyScan query 12:07:44 SkyScan query done: ret=0 az=54.945<-3663 ze=115.2<-4320 Statuses=0009 0009 12:07:44 Msec=1500 True Az=54.945 Ze=115.2 Az status=0009 Ze status=0009 12:07:44 Check angles 12:07:44 SkyScan query 12:07:45 SkyScan query done: ret=0 az=40.95<-2730 ze=93.825<-5745 Statuses=0009 0009 12:07:45 Msec=2250 True Az=40.95 Ze=93.825 Az status=0009 Ze status=0009 12:07:45 Check angles 12:07:45 SkyScan query 12:07:46 SkyScan query done: ret=0 az=40.995<-2733 ze=72.81<-7146 Statuses=0008 0009 12:07:46 Msec=3000 True Az=40.995 Ze=72.81 Az status=0008 Ze status=0009 12:07:46 Check angles 12:07:46 SkyScan query 12:07:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 12:07:46 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 12:07:46 Check angles 12:07:46 SkyScan query 12:07:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:07:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:07:47 Message to Master queued w/err=0: serial=220863 error=0 12:07:52 Received message from Master: op=Filter serial=220864 12:07:52 Color wheel filter change from 0 to 0 12:07:52 FLIGetFilterPos err=0 currentPosition=0 12:07:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:52 Filter is already there-color wheel unchanged 12:07:52 Received message from Master: op=Shutter serial=220865 12:07:52 Shutter LASER close 12:07:52 Received message from Camera: op=State serial=220867 12:07:52 GetSingleValue result=40 Value=cccccccc 12:07:52 SkyScan query 12:07:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:07:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:53 Parameters OK 12:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:53 Set A/D data flow result=40 12:07:53 Set A/D channel type result=40 12:07:53 Set A/D encoding result=40 12:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:53 Set channel filter=0.000000e+000 result=40 12:07:53 Config A/D Result=40 12:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:53 Get A/D filter: -9.255963e+061 result=40 12:07:53 Get A/D value=-858993460 result=40 12:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:53 Parameters OK 12:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:53 Set A/D data flow result=40 12:07:53 Set A/D channel type result=40 12:07:53 Set A/D encoding result=40 12:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:53 Set channel filter=0.000000e+000 result=40 12:07:53 Config A/D Result=40 12:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:53 Get A/D filter: -9.255963e+061 result=40 12:07:53 Get A/D value=-858993460 result=40 12:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:53 Aux= 12:07:53 Message to Camera, serial 220867 queued 12:08:30 Received message from Master: op=PointingHead serial=220880 12:08:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:08:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:08:30 Point started: ret=0 12:08:30 point_skyscan result=0 12:08:31 Check angles 12:08:31 SkyScan query 12:08:31 SkyScan query done: ret=0 az=64.2<-4280 ze=66.54<-7564 Statuses=0009 0008 12:08:31 Msec=0 True Az=64.2 Ze=66.54 Az status=0009 Ze status=0008 12:08:32 Check angles 12:08:32 SkyScan query 12:08:32 SkyScan query done: ret=0 az=81.96<-5464 ze=66.51<-7566 Statuses=0009 0008 12:08:32 Msec=750 True Az=81.96 Ze=66.51 Az status=0009 Ze status=0008 12:08:32 Check angles 12:08:32 SkyScan query 12:08:33 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 12:08:33 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 12:08:33 Check angles 12:08:33 SkyScan query 12:08:34 SkyScan query done: ret=0 az=116.97<-7798 ze=66.495<-7567 Statuses=0009 0008 12:08:34 Msec=2250 True Az=116.97 Ze=66.495 Az status=0009 Ze status=0008 12:08:34 Check angles 12:08:34 SkyScan query 12:08:34 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 12:08:34 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 12:08:35 Check angles 12:08:35 SkyScan query 12:08:35 SkyScan query done: ret=0 az=151.725<-10115 ze=66.495<-7567 Statuses=0009 0008 12:08:35 Msec=3750 True Az=151.725 Ze=66.495 Az status=0009 Ze status=0008 12:08:35 Check angles 12:08:35 SkyScan query 12:08:36 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:08:36 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:08:36 Message to Master queued w/err=0: serial=220880 error=0 12:08:41 Received message from Master: op=Filter serial=220881 12:08:41 Color wheel filter change from 0 to 0 12:08:41 FLIGetFilterPos err=0 currentPosition=0 12:08:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:41 Filter is already there-color wheel unchanged 12:08:41 Received message from Master: op=Shutter serial=220882 12:08:41 Shutter LASER close 12:08:41 Received message from Camera: op=State serial=220884 12:08:41 GetSingleValue result=40 Value=cccccccc 12:08:41 SkyScan query 12:08:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:08:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:42 Parameters OK 12:08:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:42 Set A/D data flow result=40 12:08:42 Set A/D channel type result=40 12:08:42 Set A/D encoding result=40 12:08:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:42 Set channel filter=0.000000e+000 result=40 12:08:42 Config A/D Result=40 12:08:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:42 Get A/D filter: -9.255963e+061 result=40 12:08:42 Get A/D value=-858993460 result=40 12:08:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:42 Parameters OK 12:08:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:42 Set A/D data flow result=40 12:08:42 Set A/D channel type result=40 12:08:42 Set A/D encoding result=40 12:08:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:42 Set channel filter=0.000000e+000 result=40 12:08:42 Config A/D Result=40 12:08:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:42 Get A/D filter: -9.255963e+061 result=40 12:08:42 Get A/D value=-858993460 result=40 12:08:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:42 Aux= 12:08:42 Message to Camera, serial 220884 queued 12:09:19 Received message from Master: op=PointingHead serial=220897 12:09:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:09:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:09:19 Point started: ret=0 12:09:19 point_skyscan result=0 12:09:20 Check angles 12:09:20 SkyScan query 12:09:20 SkyScan query done: ret=0 az=135.105<-9007 ze=36.855<-9543 Statuses=0009 0009 12:09:20 Msec=0 True Az=135.105 Ze=36.855 Az status=0009 Ze status=0009 12:09:20 Check angles 12:09:20 SkyScan query 12:09:21 SkyScan query done: ret=0 az=117.615<-7841 ze=15.885<-10941 Statuses=0009 0009 12:09:21 Msec=750 True Az=117.615 Ze=15.885 Az status=0009 Ze status=0009 12:09:21 Check angles 12:09:21 SkyScan query 12:09:22 SkyScan query done: ret=0 az=100.23<-6682 ze=-5.04<-12336 Statuses=0009 0009 12:09:22 Msec=1500 True Az=100.23 Ze=-5.04 Az status=0009 Ze status=0009 12:09:22 Check angles 12:09:22 SkyScan query 12:09:23 SkyScan query done: ret=0 az=82.695<-5513 ze=-26.01<-13734 Statuses=0009 0009 12:09:23 Msec=2250 True Az=82.695 Ze=-26.01 Az status=0009 Ze status=0009 12:09:23 Check angles 12:09:23 SkyScan query 12:09:23 SkyScan query done: ret=0 az=65.235<-4349 ze=-38.58<-14572 Statuses=0009 0008 12:09:23 Msec=3000 True Az=65.235 Ze=-38.58 Az status=0009 Ze status=0008 12:09:23 Check angles 12:09:23 SkyScan query 12:09:24 SkyScan query done: ret=0 az=47.73<-3182 ze=-38.52<-14568 Statuses=0009 0008 12:09:24 Msec=3750 True Az=47.73 Ze=-38.52 Az status=0009 Ze status=0008 12:09:24 Check angles 12:09:24 SkyScan query 12:09:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:09:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:09:25 Message to Master queued w/err=0: serial=220897 error=0 12:09:30 Received message from Master: op=Filter serial=220898 12:09:30 Color wheel filter change from 0 to 0 12:09:30 FLIGetFilterPos err=0 currentPosition=0 12:09:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:30 Filter is already there-color wheel unchanged 12:09:30 Received message from Master: op=Shutter serial=220899 12:09:30 Shutter LASER close 12:09:30 Received message from Camera: op=State serial=220901 12:09:30 GetSingleValue result=40 Value=cccccccc 12:09:30 SkyScan query 12:09:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:09:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:31 Parameters OK 12:09:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:31 Set A/D data flow result=40 12:09:31 Set A/D channel type result=40 12:09:31 Set A/D encoding result=40 12:09:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:31 Set channel filter=0.000000e+000 result=40 12:09:31 Config A/D Result=40 12:09:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:31 Get A/D filter: -9.255963e+061 result=40 12:09:31 Get A/D value=-858993460 result=40 12:09:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:31 Parameters OK 12:09:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:31 Set A/D data flow result=40 12:09:31 Set A/D channel type result=40 12:09:31 Set A/D encoding result=40 12:09:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:31 Set channel filter=0.000000e+000 result=40 12:09:31 Config A/D Result=40 12:09:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:31 Get A/D filter: -9.255963e+061 result=40 12:09:31 Get A/D value=-858993460 result=40 12:09:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:31 Aux= 12:09:31 Message to Camera, serial 220901 queued 12:10:08 Received message from Master: op=PointingHead serial=220914 12:10:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:10:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:10:08 Point started: ret=0 12:10:08 point_skyscan result=0 12:10:09 Check angles 12:10:09 SkyScan query 12:10:09 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.28<-16552 Statuses=0009 0009 12:10:09 Msec=0 True Az=63.945 Ze=-68.28 Az status=0009 Ze status=0009 12:10:09 Check angles 12:10:09 SkyScan query 12:10:10 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.25<-17950 Statuses=0009 0009 12:10:10 Msec=750 True Az=81.315 Ze=-89.25 Az status=0009 Ze status=0009 12:10:10 Check angles 12:10:10 SkyScan query 12:10:11 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.205<-19347 Statuses=0009 0009 12:10:11 Msec=1500 True Az=98.925 Ze=-110.205 Az status=0009 Ze status=0009 12:10:11 Check angles 12:10:11 SkyScan query 12:10:11 SkyScan query done: ret=0 az=116.37<-7758 ze=-131.175<-20745 Statuses=0009 0009 12:10:11 Msec=2250 True Az=116.37 Ze=-131.175 Az status=0009 Ze status=0009 12:10:12 Check angles 12:10:12 SkyScan query 12:10:12 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 12:10:12 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 12:10:12 Check angles 12:10:12 SkyScan query 12:10:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:10:13 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:10:13 Message to Master queued w/err=0: serial=220914 error=0 12:10:18 Received message from Master: op=Filter serial=220915 12:10:18 Color wheel filter change from 0 to 0 12:10:18 FLIGetFilterPos err=0 currentPosition=0 12:10:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:18 Filter is already there-color wheel unchanged 12:10:18 Received message from Master: op=Shutter serial=220916 12:10:18 Shutter LASER close 12:10:18 Received message from Camera: op=State serial=220918 12:10:18 GetSingleValue result=40 Value=cccccccc 12:10:18 SkyScan query 12:10:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:10:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:19 Parameters OK 12:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:19 Set A/D data flow result=40 12:10:19 Set A/D channel type result=40 12:10:19 Set A/D encoding result=40 12:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:19 Set channel filter=0.000000e+000 result=40 12:10:19 Config A/D Result=40 12:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:19 Get A/D filter: -9.255963e+061 result=40 12:10:19 Get A/D value=-858993460 result=40 12:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:19 Parameters OK 12:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:19 Set A/D data flow result=40 12:10:19 Set A/D channel type result=40 12:10:19 Set A/D encoding result=40 12:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:19 Set channel filter=0.000000e+000 result=40 12:10:19 Config A/D Result=40 12:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:19 Get A/D filter: -9.255963e+061 result=40 12:10:19 Get A/D value=-858993460 result=40 12:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:19 Aux= 12:10:19 Message to Camera, serial 220918 queued 12:10:56 Received message from Master: op=PointingHead serial=220931 12:10:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:10:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:10:56 Point started: ret=0 12:10:56 point_skyscan result=0 12:10:57 Check angles 12:10:57 SkyScan query 12:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0009 0009 12:10:57 Msec=0 True Az=112.995 Ze=-170.94 Az status=0009 Ze status=0009 12:10:57 Check angles 12:10:57 SkyScan query 12:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:10:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:10:58 Message to Master queued w/err=0: serial=220931 error=0 12:11:03 Received message from Master: op=Filter serial=220932 12:11:03 Color wheel filter change from 0 to 0 12:11:03 FLIGetFilterPos err=0 currentPosition=0 12:11:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:03 Filter is already there-color wheel unchanged 12:11:03 Received message from Master: op=Shutter serial=220933 12:11:03 Shutter LASER open 12:11:03 Received message from Camera: op=State serial=220935 12:11:03 GetSingleValue result=40 Value=cccccccc 12:11:03 SkyScan query 12:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:11:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:04 Parameters OK 12:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:04 Set A/D data flow result=40 12:11:04 Set A/D channel type result=40 12:11:04 Set A/D encoding result=40 12:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:04 Set channel filter=0.000000e+000 result=40 12:11:04 Config A/D Result=40 12:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:04 Get A/D filter: -9.255963e+061 result=40 12:11:04 Get A/D value=-858993460 result=40 12:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:04 Parameters OK 12:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:04 Set A/D data flow result=40 12:11:04 Set A/D channel type result=40 12:11:04 Set A/D encoding result=40 12:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:04 Set channel filter=0.000000e+000 result=40 12:11:04 Config A/D Result=40 12:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:04 Get A/D filter: -9.255963e+061 result=40 12:11:04 Get A/D value=-858993460 result=40 12:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:04 Aux= 12:11:04 Message to Camera, serial 220935 queued 12:11:12 Received message from Master: op=Shutter serial=220945 12:11:12 Shutter LASER close 12:11:13 Received message from Master: op=PointingHead serial=220949 12:11:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:11:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:11:13 Point started: ret=0 12:11:13 point_skyscan result=0 12:11:14 Check angles 12:11:14 SkyScan query 12:11:15 SkyScan query done: ret=0 az=136.485<-9099 ze=-142.74<-21516 Statuses=0009 0009 12:11:15 Msec=0 True Az=136.485 Ze=-142.74 Az status=0009 Ze status=0009 12:11:15 Check angles 12:11:15 SkyScan query 12:11:15 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.77<-20118 Statuses=0009 0009 12:11:15 Msec=750 True Az=153.96 Ze=-121.77 Az status=0009 Ze status=0009 12:11:16 Check angles 12:11:16 SkyScan query 12:11:16 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.8<-18720 Statuses=0009 0009 12:11:16 Msec=1500 True Az=171.45 Ze=-100.8 Az status=0009 Ze status=0009 12:11:16 Check angles 12:11:16 SkyScan query 12:11:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.92<-17328 Statuses=0008 0009 12:11:17 Msec=2250 True Az=176.01 Ze=-79.92 Az status=0008 Ze status=0009 12:11:17 Check angles 12:11:17 SkyScan query 12:11:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.89<-15926 Statuses=0008 0009 12:11:18 Msec=3000 True Az=175.995 Ze=-58.89 Az status=0008 Ze status=0009 12:11:18 Check angles 12:11:18 SkyScan query 12:11:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 12:11:18 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 12:11:18 Message to Master queued w/err=0: serial=220949 error=0 12:11:23 Received message from Master: op=Filter serial=220950 12:11:23 Color wheel filter change from 0 to 0 12:11:23 FLIGetFilterPos err=0 currentPosition=0 12:11:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:23 Filter is already there-color wheel unchanged 12:11:24 Received message from Master: op=Shutter serial=220951 12:11:24 Shutter LASER close 12:11:24 Received message from Camera: op=State serial=220953 12:11:24 GetSingleValue result=40 Value=cccccccc 12:11:24 SkyScan query 12:11:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:11:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:24 Parameters OK 12:11:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:24 Set A/D data flow result=40 12:11:24 Set A/D channel type result=40 12:11:24 Set A/D encoding result=40 12:11:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:24 Set channel filter=0.000000e+000 result=40 12:11:24 Config A/D Result=40 12:11:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:24 Get A/D filter: -9.255963e+061 result=40 12:11:24 Get A/D value=-858993460 result=40 12:11:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:24 Parameters OK 12:11:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:24 Set A/D data flow result=40 12:11:24 Set A/D channel type result=40 12:11:24 Set A/D encoding result=40 12:11:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:24 Set channel filter=0.000000e+000 result=40 12:11:24 Config A/D Result=40 12:11:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:24 Get A/D filter: -9.255963e+061 result=40 12:11:24 Get A/D value=-858993460 result=40 12:11:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:24 Aux= 12:11:24 Message to Camera, serial 220953 queued 12:12:01 Received message from Master: op=PointingHead serial=220966 12:12:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:12:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:12:01 Point started: ret=0 12:12:01 point_skyscan result=0 12:12:02 Check angles 12:12:02 SkyScan query 12:12:03 SkyScan query done: ret=0 az=153.195<-10213 ze=-22.05<-13470 Statuses=0009 0009 12:12:03 Msec=0 True Az=153.195 Ze=-22.05 Az status=0009 Ze status=0009 12:12:03 Check angles 12:12:03 SkyScan query 12:12:04 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.065<-12071 Statuses=0009 0009 12:12:04 Msec=750 True Az=135.78 Ze=-1.065 Az status=0009 Ze status=0009 12:12:04 Check angles 12:12:04 SkyScan query 12:12:04 SkyScan query done: ret=0 az=118.215<-7881 ze=19.875<-10675 Statuses=0009 0009 12:12:04 Msec=1500 True Az=118.215 Ze=19.875 Az status=0009 Ze status=0009 12:12:04 Check angles 12:12:04 SkyScan query 12:12:05 SkyScan query done: ret=0 az=100.845<-6723 ze=40.845<-9277 Statuses=0009 0009 12:12:05 Msec=2250 True Az=100.845 Ze=40.845 Az status=0009 Ze status=0009 12:12:05 Check angles 12:12:05 SkyScan query 12:12:06 SkyScan query done: ret=0 az=85.95<-5730 ze=51.555<-8563 Statuses=0009 0008 12:12:06 Msec=3000 True Az=85.95 Ze=51.555 Az status=0009 Ze status=0008 12:12:06 Check angles 12:12:06 SkyScan query 12:12:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:12:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:12:07 Message to Master queued w/err=0: serial=220966 error=0 12:12:12 Received message from Master: op=Filter serial=220967 12:12:12 Color wheel filter change from 0 to 0 12:12:12 FLIGetFilterPos err=0 currentPosition=0 12:12:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:12 Filter is already there-color wheel unchanged 12:12:12 Received message from Master: op=Shutter serial=220968 12:12:12 Shutter LASER close 12:12:12 Received message from Camera: op=State serial=220970 12:12:12 GetSingleValue result=40 Value=cccccccc 12:12:12 SkyScan query 12:12:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:12:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:12 Parameters OK 12:12:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:12 Set A/D data flow result=40 12:12:12 Set A/D channel type result=40 12:12:12 Set A/D encoding result=40 12:12:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:12 Set channel filter=0.000000e+000 result=40 12:12:12 Config A/D Result=40 12:12:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:12 Get A/D filter: -9.255963e+061 result=40 12:12:12 Get A/D value=-858993460 result=40 12:12:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:12 Parameters OK 12:12:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:12 Set A/D data flow result=40 12:12:12 Set A/D channel type result=40 12:12:12 Set A/D encoding result=40 12:12:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:12 Set channel filter=0.000000e+000 result=40 12:12:12 Config A/D Result=40 12:12:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:12 Get A/D filter: -9.255963e+061 result=40 12:12:12 Get A/D value=-858993460 result=40 12:12:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:12 Aux= 12:12:12 Message to Camera, serial 220970 queued 12:12:49 Received message from Master: op=PointingHead serial=220983 12:12:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:12:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:12:50 Point started: ret=0 12:12:50 point_skyscan result=0 12:12:50 Check angles 12:12:50 SkyScan query 12:12:51 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 12:12:51 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 12:12:51 Check angles 12:12:51 SkyScan query 12:12:52 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 12:12:52 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 12:12:52 Check angles 12:12:52 SkyScan query 12:12:52 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 12:12:52 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 12:12:53 Check angles 12:12:53 SkyScan query 12:12:53 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 12:12:53 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 12:12:53 Check angles 12:12:53 SkyScan query 12:12:54 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:12:54 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:12:54 Check angles 12:12:54 SkyScan query 12:12:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:12:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:12:55 Message to Master queued w/err=0: serial=220983 error=0 12:13:00 Received message from Master: op=Filter serial=220984 12:13:00 Color wheel filter change from 0 to 0 12:13:00 FLIGetFilterPos err=0 currentPosition=0 12:13:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:00 Filter is already there-color wheel unchanged 12:13:00 Received message from Master: op=Shutter serial=220985 12:13:00 Shutter LASER close 12:13:00 Received message from Camera: op=State serial=220987 12:13:00 GetSingleValue result=40 Value=cccccccc 12:13:00 SkyScan query 12:13:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:13:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:00 Parameters OK 12:13:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:00 Set A/D data flow result=40 12:13:00 Set A/D channel type result=40 12:13:00 Set A/D encoding result=40 12:13:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:00 Set channel filter=0.000000e+000 result=40 12:13:00 Config A/D Result=40 12:13:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:00 Get A/D filter: -9.255963e+061 result=40 12:13:00 Get A/D value=-858993460 result=40 12:13:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:00 Parameters OK 12:13:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:00 Set A/D data flow result=40 12:13:00 Set A/D channel type result=40 12:13:00 Set A/D encoding result=40 12:13:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:00 Set channel filter=0.000000e+000 result=40 12:13:00 Config A/D Result=40 12:13:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:00 Get A/D filter: -9.255963e+061 result=40 12:13:00 Get A/D value=-858993460 result=40 12:13:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:00 Aux= 12:13:00 Message to Camera, serial 220987 queued 12:13:37 Received message from Master: op=PointingHead serial=221000 12:13:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:13:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:13:38 Point started: ret=0 12:13:38 point_skyscan result=0 12:13:38 Check angles 12:13:38 SkyScan query 12:13:39 SkyScan query done: ret=0 az=152.58<-10172 ze=8.115<-11459 Statuses=0009 0009 12:13:39 Msec=0 True Az=152.58 Ze=8.115 Az status=0009 Ze status=0009 12:13:39 Check angles 12:13:39 SkyScan query 12:13:40 SkyScan query done: ret=0 az=134.64<-8976 ze=-13.26<-12884 Statuses=0009 0009 12:13:40 Msec=750 True Az=134.64 Ze=-13.26 Az status=0009 Ze status=0009 12:13:40 Check angles 12:13:40 SkyScan query 12:13:40 SkyScan query done: ret=0 az=117.15<-7810 ze=-34.305<-14287 Statuses=0009 0009 12:13:40 Msec=1500 True Az=117.15 Ze=-34.305 Az status=0009 Ze status=0009 12:13:41 Check angles 12:13:41 SkyScan query 12:13:41 SkyScan query done: ret=0 az=99.75<-6650 ze=-51.57<-15438 Statuses=0009 0009 12:13:41 Msec=2250 True Az=99.75 Ze=-51.57 Az status=0009 Ze status=0009 12:13:41 Check angles 12:13:41 SkyScan query 12:13:42 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 12:13:42 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 12:13:42 Check angles 12:13:42 SkyScan query 12:13:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:13:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:13:43 Message to Master queued w/err=0: serial=221000 error=0 12:13:48 Received message from Master: op=Filter serial=221001 12:13:48 Color wheel filter change from 0 to 0 12:13:48 FLIGetFilterPos err=0 currentPosition=0 12:13:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:48 Filter is already there-color wheel unchanged 12:13:48 Received message from Master: op=Shutter serial=221002 12:13:48 Shutter LASER close 12:13:48 Received message from Camera: op=State serial=221004 12:13:48 GetSingleValue result=40 Value=cccccccc 12:13:48 SkyScan query 12:13:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:13:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:49 Parameters OK 12:13:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:49 Set A/D data flow result=40 12:13:49 Set A/D channel type result=40 12:13:49 Set A/D encoding result=40 12:13:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:49 Set channel filter=0.000000e+000 result=40 12:13:49 Config A/D Result=40 12:13:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:49 Get A/D filter: -9.255963e+061 result=40 12:13:49 Get A/D value=-858993460 result=40 12:13:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:49 Parameters OK 12:13:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:49 Set A/D data flow result=40 12:13:49 Set A/D channel type result=40 12:13:49 Set A/D encoding result=40 12:13:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:49 Set channel filter=0.000000e+000 result=40 12:13:49 Config A/D Result=40 12:13:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:49 Get A/D filter: -9.255963e+061 result=40 12:13:49 Get A/D value=-858993460 result=40 12:13:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:49 Aux= 12:13:49 Message to Camera, serial 221004 queued 12:14:25 Received message from Master: op=PointingHead serial=221017 12:14:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:14:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:14:26 Point started: ret=0 12:14:26 point_skyscan result=0 12:14:26 Check angles 12:14:26 SkyScan query 12:14:27 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.255<-17417 Statuses=0009 0009 12:14:27 Msec=0 True Az=109.005 Ze=-81.255 Az status=0009 Ze status=0009 12:14:27 Check angles 12:14:27 SkyScan query 12:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.69<-18846 Statuses=0008 0009 12:14:28 Msec=750 True Az=112.995 Ze=-102.69 Az status=0008 Ze status=0009 12:14:28 Check angles 12:14:28 SkyScan query 12:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.08<-20272 Statuses=0008 0009 12:14:29 Msec=1500 True Az=112.995 Ze=-124.08 Az status=0008 Ze status=0009 12:14:29 Check angles 12:14:29 SkyScan query 12:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 12:14:29 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 12:14:29 Check angles 12:14:29 SkyScan query 12:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.395<-23093 Statuses=0008 0009 12:14:30 Msec=3000 True Az=112.995 Ze=-166.395 Az status=0008 Ze status=0009 12:14:30 Check angles 12:14:30 SkyScan query 12:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:14:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:14:31 Message to Master queued w/err=0: serial=221017 error=0 12:14:36 Received message from Master: op=Filter serial=221018 12:14:36 Color wheel filter change from 0 to 0 12:14:36 FLIGetFilterPos err=0 currentPosition=0 12:14:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:36 Filter is already there-color wheel unchanged 12:14:36 Received message from Master: op=Shutter serial=221019 12:14:36 Shutter LASER open 12:14:36 Received message from Camera: op=State serial=221021 12:14:36 GetSingleValue result=40 Value=cccccccc 12:14:36 SkyScan query 12:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:14:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:37 Parameters OK 12:14:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:37 Set A/D data flow result=40 12:14:37 Set A/D channel type result=40 12:14:37 Set A/D encoding result=40 12:14:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:37 Set channel filter=0.000000e+000 result=40 12:14:37 Config A/D Result=40 12:14:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:37 Get A/D filter: -9.255963e+061 result=40 12:14:37 Get A/D value=-858993460 result=40 12:14:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:37 Parameters OK 12:14:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:37 Set A/D data flow result=40 12:14:37 Set A/D channel type result=40 12:14:37 Set A/D encoding result=40 12:14:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:37 Set channel filter=0.000000e+000 result=40 12:14:37 Config A/D Result=40 12:14:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:37 Get A/D filter: -9.255963e+061 result=40 12:14:37 Get A/D value=-858993460 result=40 12:14:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:37 Aux= 12:14:37 Message to Camera, serial 221021 queued 12:14:44 Received message from Master: op=Shutter serial=221030 12:14:44 Shutter LASER close 12:14:45 Received message from Master: op=PointingHead serial=221034 12:14:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:14:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:14:45 Point started: ret=0 12:14:45 point_skyscan result=0 12:14:46 Check angles 12:14:46 SkyScan query 12:14:46 SkyScan query done: ret=0 az=89.82<-5988 ze=157.125<-1525 Statuses=0009 0009 12:14:46 Msec=0 True Az=89.82 Ze=157.125 Az status=0009 Ze status=0009 12:14:47 Check angles 12:14:47 SkyScan query 12:14:47 SkyScan query done: ret=0 az=72.285<-4819 ze=136.155<-2923 Statuses=0009 0009 12:14:47 Msec=750 True Az=72.285 Ze=136.155 Az status=0009 Ze status=0009 12:14:47 Check angles 12:14:47 SkyScan query 12:14:48 SkyScan query done: ret=0 az=54.975<-3665 ze=115.23<-4318 Statuses=0009 0009 12:14:48 Msec=1500 True Az=54.975 Ze=115.23 Az status=0009 Ze status=0009 12:14:48 Check angles 12:14:48 SkyScan query 12:14:49 SkyScan query done: ret=0 az=40.995<-2733 ze=94.23<-5718 Statuses=0009 0009 12:14:49 Msec=2250 True Az=40.995 Ze=94.23 Az status=0009 Ze status=0009 12:14:49 Check angles 12:14:49 SkyScan query 12:14:49 SkyScan query done: ret=0 az=40.995<-2733 ze=73.29<-7114 Statuses=0008 0009 12:14:49 Msec=3000 True Az=40.995 Ze=73.29 Az status=0008 Ze status=0009 12:14:50 Check angles 12:14:50 SkyScan query 12:14:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 12:14:50 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 12:14:50 Check angles 12:14:50 SkyScan query 12:14:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:14:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:14:51 Message to Master queued w/err=0: serial=221034 error=0 12:14:56 Received message from Master: op=Filter serial=221035 12:14:56 Color wheel filter change from 0 to 0 12:14:56 FLIGetFilterPos err=0 currentPosition=0 12:14:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:56 Filter is already there-color wheel unchanged 12:14:56 Received message from Master: op=Shutter serial=221036 12:14:56 Shutter LASER close 12:14:56 Received message from Camera: op=State serial=221038 12:14:56 GetSingleValue result=40 Value=cccccccc 12:14:56 SkyScan query 12:14:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:14:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:57 Parameters OK 12:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:57 Set A/D data flow result=40 12:14:57 Set A/D channel type result=40 12:14:57 Set A/D encoding result=40 12:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:57 Set channel filter=0.000000e+000 result=40 12:14:57 Config A/D Result=40 12:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:57 Get A/D filter: -9.255963e+061 result=40 12:14:57 Get A/D value=-858993460 result=40 12:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:57 Parameters OK 12:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:57 Set A/D data flow result=40 12:14:57 Set A/D channel type result=40 12:14:57 Set A/D encoding result=40 12:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:57 Set channel filter=0.000000e+000 result=40 12:14:57 Config A/D Result=40 12:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:57 Get A/D filter: -9.255963e+061 result=40 12:14:57 Get A/D value=-858993460 result=40 12:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:57 Aux= 12:14:57 Message to Camera, serial 221038 queued 12:15:27 Received message from Master: op=Identify serial=221041 12:15:34 Received message from Master: op=PointingHead serial=221054 12:15:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:15:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:15:34 Point started: ret=0 12:15:34 point_skyscan result=0 12:15:35 Check angles 12:15:35 SkyScan query 12:15:35 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 12:15:35 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 12:15:35 Check angles 12:15:35 SkyScan query 12:15:36 SkyScan query done: ret=0 az=82.305<-5487 ze=66.495<-7567 Statuses=0009 0008 12:15:36 Msec=750 True Az=82.305 Ze=66.495 Az status=0009 Ze status=0008 12:15:36 Check angles 12:15:36 SkyScan query 12:15:37 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 12:15:37 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-17 12:15:37] 12:15:37 Check angles 12:15:37 SkyScan query 12:15:38 SkyScan query done: ret=0 az=118.575<-7905 ze=66.495<-7567 Statuses=0009 0008 12:15:38 Msec=2250 True Az=118.575 Ze=66.495 Az status=0009 Ze status=0008 12:15:38 Check angles 12:15:38 SkyScan query 12:15:38 SkyScan query done: ret=0 az=135.075<-9005 ze=66.495<-7567 Statuses=0009 0008 12:15:38 Msec=3000 True Az=135.075 Ze=66.495 Az status=0009 Ze status=0008 12:15:39 Check angles 12:15:39 SkyScan query 12:15:39 SkyScan query done: ret=0 az=152.775<-10185 ze=66.495<-7567 Statuses=0009 0008 12:15:39 Msec=3750 True Az=152.775 Ze=66.495 Az status=0009 Ze status=0008 12:15:39 Check angles 12:15:39 SkyScan query 12:15:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:15:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:15:40 Message to Master queued w/err=0: serial=221054 error=0 12:15:45 Received message from Master: op=Filter serial=221055 12:15:45 Color wheel filter change from 0 to 0 12:15:45 FLIGetFilterPos err=0 currentPosition=0 12:15:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:45 Filter is already there-color wheel unchanged 12:15:45 Received message from Master: op=Shutter serial=221056 12:15:45 Shutter LASER close 12:15:45 Received message from Camera: op=State serial=221058 12:15:45 GetSingleValue result=40 Value=cccccccc 12:15:45 SkyScan query 12:15:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:15:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:46 Parameters OK 12:15:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:46 Set A/D data flow result=40 12:15:46 Set A/D channel type result=40 12:15:46 Set A/D encoding result=40 12:15:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:46 Set channel filter=0.000000e+000 result=40 12:15:46 Config A/D Result=40 12:15:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:46 Get A/D filter: -9.255963e+061 result=40 12:15:46 Get A/D value=-858993460 result=40 12:15:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:46 Parameters OK 12:15:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:46 Set A/D data flow result=40 12:15:46 Set A/D channel type result=40 12:15:46 Set A/D encoding result=40 12:15:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:46 Set channel filter=0.000000e+000 result=40 12:15:46 Config A/D Result=40 12:15:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:46 Get A/D filter: -9.255963e+061 result=40 12:15:46 Get A/D value=-858993460 result=40 12:15:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:46 Aux= 12:15:46 Message to Camera, serial 221058 queued [UTC 2018-12-17 12:15:52] 12:16:22 Received message from Master: op=PointingHead serial=221070 12:16:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:16:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:16:22 Point started: ret=0 12:16:22 point_skyscan result=0 12:16:23 Check angles 12:16:23 SkyScan query 12:16:23 SkyScan query done: ret=0 az=134.985<-8999 ze=36.705<-9553 Statuses=0009 0009 12:16:23 Msec=0 True Az=134.985 Ze=36.705 Az status=0009 Ze status=0009 12:16:23 Check angles 12:16:23 SkyScan query 12:16:24 SkyScan query done: ret=0 az=117.105<-7807 ze=15.345<-10977 Statuses=0009 0009 12:16:24 Msec=750 True Az=117.105 Ze=15.345 Az status=0009 Ze status=0009 12:16:24 Check angles 12:16:24 SkyScan query 12:16:25 SkyScan query done: ret=0 az=99.375<-6625 ze=-6.105<-12407 Statuses=0009 0009 12:16:25 Msec=1500 True Az=99.375 Ze=-6.105 Az status=0009 Ze status=0009 12:16:25 Check angles 12:16:25 SkyScan query 12:16:25 SkyScan query done: ret=0 az=81.915<-5461 ze=-27.15<-13810 Statuses=0009 0009 12:16:25 Msec=2250 True Az=81.915 Ze=-27.15 Az status=0009 Ze status=0009 12:16:26 Check angles 12:16:26 SkyScan query 12:16:26 SkyScan query done: ret=0 az=64.32<-4288 ze=-38.58<-14572 Statuses=0009 0008 12:16:26 Msec=3000 True Az=64.32 Ze=-38.58 Az status=0009 Ze status=0008 12:16:26 Check angles 12:16:26 SkyScan query 12:16:27 SkyScan query done: ret=0 az=46.695<-3113 ze=-38.52<-14568 Statuses=0009 0008 12:16:27 Msec=3750 True Az=46.695 Ze=-38.52 Az status=0009 Ze status=0008 12:16:27 Check angles 12:16:27 SkyScan query 12:16:28 SkyScan query done: ret=0 az=41.01<-2734 ze=-38.505<-14567 Statuses=0008 0008 12:16:28 Msec=4500 True Az=41.01 Ze=-38.505 Az status=0008 Ze status=0008 12:16:28 Message to Master queued w/err=0: serial=221070 error=0 12:16:33 Received message from Master: op=Filter serial=221071 12:16:33 Color wheel filter change from 0 to 0 12:16:33 FLIGetFilterPos err=0 currentPosition=0 12:16:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:33 Filter is already there-color wheel unchanged 12:16:33 Received message from Master: op=Shutter serial=221072 12:16:33 Shutter LASER close 12:16:33 Received message from Camera: op=State serial=221074 12:16:33 GetSingleValue result=40 Value=cccccccc 12:16:33 SkyScan query 12:16:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:16:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:34 Parameters OK 12:16:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:34 Set A/D data flow result=40 12:16:34 Set A/D channel type result=40 12:16:34 Set A/D encoding result=40 12:16:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:34 Set channel filter=0.000000e+000 result=40 12:16:34 Config A/D Result=40 12:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:34 Get A/D filter: -9.255963e+061 result=40 12:16:34 Get A/D value=-858993460 result=40 12:16:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:34 Parameters OK 12:16:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:34 Set A/D data flow result=40 12:16:34 Set A/D channel type result=40 12:16:34 Set A/D encoding result=40 12:16:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:34 Set channel filter=0.000000e+000 result=40 12:16:34 Config A/D Result=40 12:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:34 Get A/D filter: -9.255963e+061 result=40 12:16:34 Get A/D value=-858993460 result=40 12:16:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:34 Aux= 12:16:34 Message to Camera, serial 221074 queued 12:17:10 Received message from Master: op=PointingHead serial=221087 12:17:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:17:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:17:11 Point started: ret=0 12:17:11 point_skyscan result=0 12:17:11 Check angles 12:17:11 SkyScan query 12:17:12 SkyScan query done: ret=0 az=64.035<-4269 ze=-68.25<-16550 Statuses=0009 0009 12:17:12 Msec=0 True Az=64.035 Ze=-68.25 Az status=0009 Ze status=0009 12:17:12 Check angles 12:17:12 SkyScan query 12:17:13 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.22<-17948 Statuses=0009 0009 12:17:13 Msec=750 True Az=81.315 Ze=-89.22 Az status=0009 Ze status=0009 12:17:13 Check angles 12:17:13 SkyScan query 12:17:14 SkyScan query done: ret=0 az=98.895<-6593 ze=-110.16<-19344 Statuses=0009 0009 12:17:14 Msec=1500 True Az=98.895 Ze=-110.16 Az status=0009 Ze status=0009 12:17:14 Check angles 12:17:14 SkyScan query 12:17:14 SkyScan query done: ret=0 az=116.25<-7750 ze=-131.115<-20741 Statuses=0009 0009 12:17:14 Msec=2250 True Az=116.25 Ze=-131.115 Az status=0009 Ze status=0009 12:17:14 Check angles 12:17:14 SkyScan query 12:17:15 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 12:17:15 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 12:17:15 Check angles 12:17:15 SkyScan query 12:17:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:17:16 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:17:16 Message to Master queued w/err=0: serial=221087 error=0 12:17:21 Received message from Master: op=Filter serial=221088 12:17:21 Color wheel filter change from 0 to 0 12:17:21 FLIGetFilterPos err=0 currentPosition=0 12:17:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:21 Filter is already there-color wheel unchanged 12:17:21 Received message from Master: op=Shutter serial=221089 12:17:21 Shutter LASER close 12:17:21 Received message from Camera: op=State serial=221091 12:17:21 GetSingleValue result=40 Value=cccccccc 12:17:21 SkyScan query 12:17:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:17:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:22 Parameters OK 12:17:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:22 Set A/D data flow result=40 12:17:22 Set A/D channel type result=40 12:17:22 Set A/D encoding result=40 12:17:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:22 Set channel filter=0.000000e+000 result=40 12:17:22 Config A/D Result=40 12:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:22 Get A/D filter: -9.255963e+061 result=40 12:17:22 Get A/D value=-858993460 result=40 12:17:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:22 Parameters OK 12:17:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:22 Set A/D data flow result=40 12:17:22 Set A/D channel type result=40 12:17:22 Set A/D encoding result=40 12:17:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:22 Set channel filter=0.000000e+000 result=40 12:17:22 Config A/D Result=40 12:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:22 Get A/D filter: -9.255963e+061 result=40 12:17:22 Get A/D value=-858993460 result=40 12:17:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:22 Aux= 12:17:22 Message to Camera, serial 221091 queued 12:17:58 Received message from Master: op=PointingHead serial=221104 12:17:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:17:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:17:59 Point started: ret=0 12:17:59 point_skyscan result=0 12:18:00 Check angles 12:18:00 SkyScan query 12:18:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 12:18:00 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 12:18:00 Check angles 12:18:00 SkyScan query 12:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:18:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:18:01 Message to Master queued w/err=0: serial=221104 error=0 12:18:06 Received message from Master: op=Filter serial=221105 12:18:06 Color wheel filter change from 0 to 0 12:18:06 FLIGetFilterPos err=0 currentPosition=0 12:18:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:06 Filter is already there-color wheel unchanged 12:18:06 Received message from Master: op=Shutter serial=221106 12:18:06 Shutter LASER open 12:18:06 Received message from Camera: op=State serial=221108 12:18:06 GetSingleValue result=40 Value=cccccccc 12:18:06 SkyScan query 12:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:18:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:07 Parameters OK 12:18:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:07 Set A/D data flow result=40 12:18:07 Set A/D channel type result=40 12:18:07 Set A/D encoding result=40 12:18:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:07 Set channel filter=0.000000e+000 result=40 12:18:07 Config A/D Result=40 12:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:07 Get A/D filter: -9.255963e+061 result=40 12:18:07 Get A/D value=-858993460 result=40 12:18:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:07 Parameters OK 12:18:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:07 Set A/D data flow result=40 12:18:07 Set A/D channel type result=40 12:18:07 Set A/D encoding result=40 12:18:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:07 Set channel filter=0.000000e+000 result=40 12:18:07 Config A/D Result=40 12:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:07 Get A/D filter: -9.255963e+061 result=40 12:18:07 Get A/D value=-858993460 result=40 12:18:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:07 Aux= 12:18:07 Message to Camera, serial 221108 queued 12:18:15 Received message from Master: op=Shutter serial=221118 12:18:15 Shutter LASER close 12:18:16 Received message from Master: op=PointingHead serial=221122 12:18:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:18:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:18:16 Point started: ret=0 12:18:16 point_skyscan result=0 12:18:17 Check angles 12:18:17 SkyScan query 12:18:17 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.265<-21551 Statuses=0009 0009 12:18:17 Msec=0 True Az=135.885 Ze=-143.265 Az status=0009 Ze status=0009 12:18:18 Check angles 12:18:18 SkyScan query 12:18:18 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.86<-20124 Statuses=0009 0009 12:18:18 Msec=750 True Az=153.765 Ze=-121.86 Az status=0009 Ze status=0009 12:18:18 Check angles 12:18:18 SkyScan query 12:18:19 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.92<-18728 Statuses=0009 0009 12:18:19 Msec=1500 True Az=171.255 Ze=-100.92 Az status=0009 Ze status=0009 12:18:19 Check angles 12:18:19 SkyScan query 12:18:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.04<-17336 Statuses=0008 0009 12:18:20 Msec=2250 True Az=175.995 Ze=-80.04 Az status=0008 Ze status=0009 12:18:20 Check angles 12:18:20 SkyScan query 12:18:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.04<-15936 Statuses=0008 0009 12:18:21 Msec=3000 True Az=175.995 Ze=-59.04 Az status=0008 Ze status=0009 12:18:21 Check angles 12:18:21 SkyScan query 12:18:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:18:21 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:18:21 Message to Master queued w/err=0: serial=221122 error=0 12:18:26 Received message from Master: op=Filter serial=221123 12:18:26 Color wheel filter change from 0 to 0 12:18:26 FLIGetFilterPos err=0 currentPosition=0 12:18:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:26 Filter is already there-color wheel unchanged 12:18:26 Received message from Master: op=Shutter serial=221124 12:18:26 Shutter LASER close 12:18:27 Received message from Camera: op=State serial=221126 12:18:27 GetSingleValue result=40 Value=cccccccc 12:18:27 SkyScan query 12:18:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:18:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:27 Parameters OK 12:18:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:27 Set A/D data flow result=40 12:18:27 Set A/D channel type result=40 12:18:27 Set A/D encoding result=40 12:18:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:27 Set channel filter=0.000000e+000 result=40 12:18:27 Config A/D Result=40 12:18:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:27 Get A/D filter: -9.255963e+061 result=40 12:18:27 Get A/D value=-858993460 result=40 12:18:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:27 Parameters OK 12:18:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:27 Set A/D data flow result=40 12:18:27 Set A/D channel type result=40 12:18:27 Set A/D encoding result=40 12:18:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:27 Set channel filter=0.000000e+000 result=40 12:18:27 Config A/D Result=40 12:18:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:27 Get A/D filter: -9.255963e+061 result=40 12:18:27 Get A/D value=-858993460 result=40 12:18:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:27 Aux= 12:18:27 Message to Camera, serial 221126 queued 12:19:04 Received message from Master: op=PointingHead serial=221139 12:19:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:19:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:19:04 Point started: ret=0 12:19:04 point_skyscan result=0 12:19:05 Check angles 12:19:05 SkyScan query 12:19:06 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.795<-13453 Statuses=0009 0009 12:19:06 Msec=0 True Az=152.94 Ze=-21.795 Az status=0009 Ze status=0009 12:19:06 Check angles 12:19:06 SkyScan query 12:19:07 SkyScan query done: ret=0 az=135.18<-9012 ze=-0.33<-12022 Statuses=0009 0009 12:19:07 Msec=750 True Az=135.18 Ze=-0.33 Az status=0009 Ze status=0009 12:19:07 Check angles 12:19:07 SkyScan query 12:19:07 SkyScan query done: ret=0 az=117.315<-7821 ze=21.045<-10597 Statuses=0009 0009 12:19:07 Msec=1500 True Az=117.315 Ze=21.045 Az status=0009 Ze status=0009 12:19:07 Check angles 12:19:07 SkyScan query 12:19:08 SkyScan query done: ret=0 az=99.975<-6665 ze=41.985<-9201 Statuses=0009 0009 12:19:08 Msec=2250 True Az=99.975 Ze=41.985 Az status=0009 Ze status=0009 12:19:08 Check angles 12:19:08 SkyScan query 12:19:09 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 12:19:09 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 12:19:09 Check angles 12:19:09 SkyScan query 12:19:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:19:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:19:10 Message to Master queued w/err=0: serial=221139 error=0 12:19:15 Received message from Master: op=Filter serial=221140 12:19:15 Color wheel filter change from 0 to 0 12:19:15 FLIGetFilterPos err=0 currentPosition=0 12:19:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:15 Filter is already there-color wheel unchanged 12:19:15 Received message from Master: op=Shutter serial=221141 12:19:15 Shutter LASER close 12:19:15 Received message from Camera: op=State serial=221143 12:19:15 GetSingleValue result=40 Value=cccccccc 12:19:15 SkyScan query 12:19:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:19:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:15 Parameters OK 12:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:15 Set A/D data flow result=40 12:19:15 Set A/D channel type result=40 12:19:15 Set A/D encoding result=40 12:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:15 Set channel filter=0.000000e+000 result=40 12:19:15 Config A/D Result=40 12:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:15 Get A/D filter: -9.255963e+061 result=40 12:19:15 Get A/D value=-858993460 result=40 12:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:15 Parameters OK 12:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:15 Set A/D data flow result=40 12:19:15 Set A/D channel type result=40 12:19:15 Set A/D encoding result=40 12:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:15 Set channel filter=0.000000e+000 result=40 12:19:15 Config A/D Result=40 12:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:15 Get A/D filter: -9.255963e+061 result=40 12:19:15 Get A/D value=-858993460 result=40 12:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:15 Aux= 12:19:15 Message to Camera, serial 221143 queued 12:19:52 Received message from Master: op=PointingHead serial=221156 12:19:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:19:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:19:53 Point started: ret=0 12:19:53 point_skyscan result=0 12:19:53 Check angles 12:19:53 SkyScan query 12:19:54 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 12:19:54 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 12:19:54 Check angles 12:19:54 SkyScan query 12:19:55 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 12:19:55 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 12:19:55 Check angles 12:19:55 SkyScan query 12:19:55 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 12:19:55 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 12:19:56 Check angles 12:19:56 SkyScan query 12:19:56 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 12:19:56 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 12:19:56 Check angles 12:19:56 SkyScan query 12:19:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:19:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:19:57 Check angles 12:19:57 SkyScan query 12:19:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:19:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:19:58 Message to Master queued w/err=0: serial=221156 error=0 12:20:03 Received message from Master: op=Filter serial=221157 12:20:03 Color wheel filter change from 0 to 0 12:20:03 FLIGetFilterPos err=0 currentPosition=0 12:20:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:03 Filter is already there-color wheel unchanged 12:20:03 Received message from Master: op=Shutter serial=221158 12:20:03 Shutter LASER close 12:20:03 Received message from Camera: op=State serial=221160 12:20:03 GetSingleValue result=40 Value=cccccccc 12:20:03 SkyScan query 12:20:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:20:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:03 Parameters OK 12:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:03 Set A/D data flow result=40 12:20:03 Set A/D channel type result=40 12:20:03 Set A/D encoding result=40 12:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:03 Set channel filter=0.000000e+000 result=40 12:20:03 Config A/D Result=40 12:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:03 Get A/D filter: -9.255963e+061 result=40 12:20:03 Get A/D value=-858993460 result=40 12:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:03 Parameters OK 12:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:03 Set A/D data flow result=40 12:20:03 Set A/D channel type result=40 12:20:03 Set A/D encoding result=40 12:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:03 Set channel filter=0.000000e+000 result=40 12:20:03 Config A/D Result=40 12:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:03 Get A/D filter: -9.255963e+061 result=40 12:20:03 Get A/D value=-858993460 result=40 12:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:03 Aux= 12:20:03 Message to Camera, serial 221160 queued 12:20:40 Received message from Master: op=PointingHead serial=221173 12:20:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:20:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:20:41 Point started: ret=0 12:20:41 point_skyscan result=0 12:20:41 Check angles 12:20:41 SkyScan query 12:20:42 SkyScan query done: ret=0 az=152.91<-10194 ze=8.505<-11433 Statuses=0009 0009 12:20:42 Msec=0 True Az=152.91 Ze=8.505 Az status=0009 Ze status=0009 12:20:42 Check angles 12:20:42 SkyScan query 12:20:43 SkyScan query done: ret=0 az=135.045<-9003 ze=-12.855<-12857 Statuses=0009 0009 12:20:43 Msec=750 True Az=135.045 Ze=-12.855 Az status=0009 Ze status=0009 12:20:43 Check angles 12:20:43 SkyScan query 12:20:43 SkyScan query done: ret=0 az=117.15<-7810 ze=-34.41<-14294 Statuses=0009 0009 12:20:43 Msec=1500 True Az=117.15 Ze=-34.41 Az status=0009 Ze status=0009 12:20:44 Check angles 12:20:44 SkyScan query 12:20:44 SkyScan query done: ret=0 az=99.69<-6646 ze=-51.555<-15437 Statuses=0009 0009 12:20:44 Msec=2250 True Az=99.69 Ze=-51.555 Az status=0009 Ze status=0009 12:20:44 Check angles 12:20:44 SkyScan query 12:20:45 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:20:45 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:20:45 Check angles 12:20:45 SkyScan query 12:20:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:20:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:20:46 Message to Master queued w/err=0: serial=221173 error=0 12:20:51 Received message from Master: op=Filter serial=221174 12:20:51 Color wheel filter change from 0 to 0 12:20:51 FLIGetFilterPos err=0 currentPosition=0 12:20:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:51 Filter is already there-color wheel unchanged 12:20:51 Received message from Master: op=Shutter serial=221175 12:20:51 Shutter LASER close 12:20:51 Received message from Camera: op=State serial=221177 12:20:51 GetSingleValue result=40 Value=cccccccc 12:20:51 SkyScan query 12:20:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:20:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:52 Parameters OK 12:20:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:52 Set A/D data flow result=40 12:20:52 Set A/D channel type result=40 12:20:52 Set A/D encoding result=40 12:20:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:52 Set channel filter=0.000000e+000 result=40 12:20:52 Config A/D Result=40 12:20:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:52 Get A/D filter: -9.255963e+061 result=40 12:20:52 Get A/D value=-858993460 result=40 12:20:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:52 Parameters OK 12:20:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:52 Set A/D data flow result=40 12:20:52 Set A/D channel type result=40 12:20:52 Set A/D encoding result=40 12:20:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:52 Set channel filter=0.000000e+000 result=40 12:20:52 Config A/D Result=40 12:20:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:52 Get A/D filter: -9.255963e+061 result=40 12:20:52 Get A/D value=-858993460 result=40 12:20:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:52 Aux= 12:20:52 Message to Camera, serial 221177 queued 12:21:28 Received message from Master: op=PointingHead serial=221190 12:21:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:21:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:21:29 Point started: ret=0 12:21:29 point_skyscan result=0 12:21:29 Check angles 12:21:29 SkyScan query 12:21:30 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.75<-17450 Statuses=0009 0009 12:21:30 Msec=0 True Az=109.35 Ze=-81.75 Az status=0009 Ze status=0009 12:21:30 Check angles 12:21:30 SkyScan query 12:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.125<-18875 Statuses=0008 0009 12:21:31 Msec=750 True Az=112.995 Ze=-103.125 Az status=0008 Ze status=0009 12:21:31 Check angles 12:21:31 SkyScan query 12:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.08<-20272 Statuses=0008 0009 12:21:32 Msec=1500 True Az=112.995 Ze=-124.08 Az status=0008 Ze status=0009 12:21:32 Check angles 12:21:32 SkyScan query 12:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 12:21:32 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 12:21:32 Check angles 12:21:32 SkyScan query 12:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 12:21:33 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 12:21:33 Check angles 12:21:33 SkyScan query 12:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:21:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:21:34 Message to Master queued w/err=0: serial=221190 error=0 12:21:39 Received message from Master: op=Filter serial=221191 12:21:39 Color wheel filter change from 0 to 0 12:21:39 FLIGetFilterPos err=0 currentPosition=0 12:21:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:39 Filter is already there-color wheel unchanged 12:21:39 Received message from Master: op=Shutter serial=221192 12:21:39 Shutter LASER open 12:21:39 Received message from Camera: op=State serial=221194 12:21:39 GetSingleValue result=40 Value=cccccccc 12:21:39 SkyScan query 12:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:21:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:40 Parameters OK 12:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:40 Set A/D data flow result=40 12:21:40 Set A/D channel type result=40 12:21:40 Set A/D encoding result=40 12:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:40 Set channel filter=0.000000e+000 result=40 12:21:40 Config A/D Result=40 12:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:40 Get A/D filter: -9.255963e+061 result=40 12:21:40 Get A/D value=-858993460 result=40 12:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:40 Parameters OK 12:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:40 Set A/D data flow result=40 12:21:40 Set A/D channel type result=40 12:21:40 Set A/D encoding result=40 12:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:40 Set channel filter=0.000000e+000 result=40 12:21:40 Config A/D Result=40 12:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:40 Get A/D filter: -9.255963e+061 result=40 12:21:40 Get A/D value=-858993460 result=40 12:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:40 Aux= 12:21:40 Message to Camera, serial 221194 queued 12:21:48 Received message from Master: op=Shutter serial=221204 12:21:48 Shutter LASER close 12:21:49 Received message from Master: op=PointingHead serial=221208 12:21:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:21:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:21:49 Point started: ret=0 12:21:49 point_skyscan result=0 12:21:50 Check angles 12:21:50 SkyScan query 12:21:50 SkyScan query done: ret=0 az=90.03<-6002 ze=157.38<-1508 Statuses=0009 0009 12:21:50 Msec=0 True Az=90.03 Ze=157.38 Az status=0009 Ze status=0009 12:21:50 Check angles 12:21:50 SkyScan query 12:21:51 SkyScan query done: ret=0 az=72.585<-4839 ze=136.41<-2906 Statuses=0009 0009 12:21:51 Msec=750 True Az=72.585 Ze=136.41 Az status=0009 Ze status=0009 12:21:51 Check angles 12:21:51 SkyScan query 12:21:52 SkyScan query done: ret=0 az=55.125<-3675 ze=115.5<-4300 Statuses=0009 0009 12:21:52 Msec=1500 True Az=55.125 Ze=115.5 Az status=0009 Ze status=0009 12:21:52 Check angles 12:21:52 SkyScan query 12:21:53 SkyScan query done: ret=0 az=40.995<-2733 ze=94.455<-5703 Statuses=0009 0009 12:21:53 Msec=2250 True Az=40.995 Ze=94.455 Az status=0009 Ze status=0009 12:21:53 Check angles 12:21:53 SkyScan query 12:21:53 SkyScan query done: ret=0 az=40.995<-2733 ze=73.59<-7094 Statuses=0008 0009 12:21:53 Msec=3000 True Az=40.995 Ze=73.59 Az status=0008 Ze status=0009 12:21:53 Check angles 12:21:53 SkyScan query 12:21:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.935<-8471 Statuses=0008 0009 12:21:54 Msec=3750 True Az=40.995 Ze=52.935 Az status=0008 Ze status=0009 12:21:54 Check angles 12:21:54 SkyScan query 12:21:55 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:21:55 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:21:55 Message to Master queued w/err=0: serial=221208 error=0 12:22:00 Received message from Master: op=Filter serial=221209 12:22:00 Color wheel filter change from 0 to 0 12:22:00 FLIGetFilterPos err=0 currentPosition=0 12:22:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:00 Filter is already there-color wheel unchanged 12:22:00 Received message from Master: op=Shutter serial=221210 12:22:00 Shutter LASER close 12:22:00 Received message from Camera: op=State serial=221212 12:22:00 GetSingleValue result=40 Value=cccccccc 12:22:00 SkyScan query 12:22:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:22:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:01 Parameters OK 12:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:01 Set A/D data flow result=40 12:22:01 Set A/D channel type result=40 12:22:01 Set A/D encoding result=40 12:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:01 Set channel filter=0.000000e+000 result=40 12:22:01 Config A/D Result=40 12:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:01 Get A/D filter: -9.255963e+061 result=40 12:22:01 Get A/D value=-858993460 result=40 12:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:01 Parameters OK 12:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:01 Set A/D data flow result=40 12:22:01 Set A/D channel type result=40 12:22:01 Set A/D encoding result=40 12:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:01 Set channel filter=0.000000e+000 result=40 12:22:01 Config A/D Result=40 12:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:01 Get A/D filter: -9.255963e+061 result=40 12:22:01 Get A/D value=-858993460 result=40 12:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:01 Aux= 12:22:01 Message to Camera, serial 221212 queued 12:22:37 Received message from Master: op=PointingHead serial=221225 12:22:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:22:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:22:38 Point started: ret=0 12:22:38 point_skyscan result=0 12:22:39 Check angles 12:22:39 SkyScan query 12:22:39 SkyScan query done: ret=0 az=64.26<-4284 ze=66.555<-7563 Statuses=0009 0008 12:22:39 Msec=0 True Az=64.26 Ze=66.555 Az status=0009 Ze status=0008 12:22:39 Check angles 12:22:39 SkyScan query 12:22:40 SkyScan query done: ret=0 az=81.54<-5436 ze=66.495<-7567 Statuses=0009 0008 12:22:40 Msec=750 True Az=81.54 Ze=66.495 Az status=0009 Ze status=0008 12:22:40 Check angles 12:22:40 SkyScan query 12:22:41 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 12:22:41 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 12:22:41 Check angles 12:22:41 SkyScan query 12:22:41 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 12:22:41 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 12:22:42 Check angles 12:22:42 SkyScan query 12:22:42 SkyScan query done: ret=0 az=133.98<-8932 ze=66.495<-7567 Statuses=0009 0008 12:22:42 Msec=3000 True Az=133.98 Ze=66.495 Az status=0009 Ze status=0008 12:22:42 Check angles 12:22:42 SkyScan query 12:22:43 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 12:22:43 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 12:22:43 Check angles 12:22:43 SkyScan query 12:22:44 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:22:44 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:22:44 Message to Master queued w/err=0: serial=221225 error=0 12:22:49 Received message from Master: op=Filter serial=221226 12:22:49 Color wheel filter change from 0 to 0 12:22:49 FLIGetFilterPos err=0 currentPosition=0 12:22:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:49 Filter is already there-color wheel unchanged 12:22:49 Received message from Master: op=Shutter serial=221227 12:22:49 Shutter LASER close 12:22:49 Received message from Camera: op=State serial=221229 12:22:49 GetSingleValue result=40 Value=cccccccc 12:22:49 SkyScan query 12:22:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:22:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:49 Parameters OK 12:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:49 Set A/D data flow result=40 12:22:49 Set A/D channel type result=40 12:22:49 Set A/D encoding result=40 12:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:49 Set channel filter=0.000000e+000 result=40 12:22:49 Config A/D Result=40 12:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:49 Get A/D filter: -9.255963e+061 result=40 12:22:49 Get A/D value=-858993460 result=40 12:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:49 Parameters OK 12:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:49 Set A/D data flow result=40 12:22:49 Set A/D channel type result=40 12:22:49 Set A/D encoding result=40 12:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:49 Set channel filter=0.000000e+000 result=40 12:22:49 Config A/D Result=40 12:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:49 Get A/D filter: -9.255963e+061 result=40 12:22:49 Get A/D value=-858993460 result=40 12:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:49 Aux= 12:22:49 Message to Camera, serial 221229 queued 12:23:26 Received message from Master: op=PointingHead serial=221242 12:23:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:23:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:23:27 Point started: ret=0 12:23:27 point_skyscan result=0 12:23:27 Check angles 12:23:27 SkyScan query 12:23:28 SkyScan query done: ret=0 az=135.195<-9013 ze=36.9<-9540 Statuses=0009 0009 12:23:28 Msec=0 True Az=135.195 Ze=36.9 Az status=0009 Ze status=0009 12:23:28 Check angles 12:23:28 SkyScan query 12:23:29 SkyScan query done: ret=0 az=117.735<-7849 ze=15.93<-10938 Statuses=0009 0009 12:23:29 Msec=750 True Az=117.735 Ze=15.93 Az status=0009 Ze status=0009 12:23:29 Check angles 12:23:29 SkyScan query 12:23:30 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.46<-12364 Statuses=0009 0009 12:23:30 Msec=1500 True Az=99.93 Ze=-5.46 Az status=0009 Ze status=0009 12:23:30 Check angles 12:23:30 SkyScan query 12:23:30 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.37<-13758 Statuses=0009 0009 12:23:30 Msec=2250 True Az=82.455 Ze=-26.37 Az status=0009 Ze status=0009 12:23:30 Check angles 12:23:30 SkyScan query 12:23:31 SkyScan query done: ret=0 az=65.04<-4336 ze=-38.58<-14572 Statuses=0009 0008 12:23:31 Msec=3000 True Az=65.04 Ze=-38.58 Az status=0009 Ze status=0008 12:23:31 Check angles 12:23:31 SkyScan query 12:23:32 SkyScan query done: ret=0 az=47.43<-3162 ze=-38.52<-14568 Statuses=0009 0008 12:23:32 Msec=3750 True Az=47.43 Ze=-38.52 Az status=0009 Ze status=0008 12:23:32 Check angles 12:23:32 SkyScan query 12:23:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:23:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:23:33 Message to Master queued w/err=0: serial=221242 error=0 12:23:38 Received message from Master: op=Filter serial=221243 12:23:38 Color wheel filter change from 0 to 0 12:23:38 FLIGetFilterPos err=0 currentPosition=0 12:23:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:38 Filter is already there-color wheel unchanged 12:23:38 Received message from Master: op=Shutter serial=221244 12:23:38 Shutter LASER close 12:23:38 Received message from Camera: op=State serial=221246 12:23:38 GetSingleValue result=40 Value=cccccccc 12:23:38 SkyScan query 12:23:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:23:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:38 Parameters OK 12:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:38 Set A/D data flow result=40 12:23:38 Set A/D channel type result=40 12:23:38 Set A/D encoding result=40 12:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:38 Set channel filter=0.000000e+000 result=40 12:23:38 Config A/D Result=40 12:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:38 Get A/D filter: -9.255963e+061 result=40 12:23:38 Get A/D value=-858993460 result=40 12:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:38 Parameters OK 12:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:38 Set A/D data flow result=40 12:23:38 Set A/D channel type result=40 12:23:38 Set A/D encoding result=40 12:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:38 Set channel filter=0.000000e+000 result=40 12:23:38 Config A/D Result=40 12:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:38 Get A/D filter: -9.255963e+061 result=40 12:23:38 Get A/D value=-858993460 result=40 12:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:38 Aux= 12:23:38 Message to Camera, serial 221246 queued 12:24:15 Received message from Master: op=PointingHead serial=221259 12:24:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:24:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:24:16 Point started: ret=0 12:24:16 point_skyscan result=0 12:24:16 Check angles 12:24:16 SkyScan query 12:24:17 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.145<-16543 Statuses=0009 0009 12:24:17 Msec=0 True Az=63.81 Ze=-68.145 Az status=0009 Ze status=0009 12:24:17 Check angles 12:24:17 SkyScan query 12:24:18 SkyScan query done: ret=0 az=81.18<-5412 ze=-89.145<-17943 Statuses=0009 0009 12:24:18 Msec=750 True Az=81.18 Ze=-89.145 Az status=0009 Ze status=0009 12:24:18 Check angles 12:24:18 SkyScan query 12:24:18 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.55<-19370 Statuses=0009 0009 12:24:18 Msec=1500 True Az=99.195 Ze=-110.55 Az status=0009 Ze status=0009 12:24:19 Check angles 12:24:19 SkyScan query 12:24:19 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.88<-20792 Statuses=0009 0009 12:24:19 Msec=2250 True Az=117.105 Ze=-131.88 Az status=0009 Ze status=0009 12:24:19 Check angles 12:24:19 SkyScan query 12:24:20 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 12:24:20 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 12:24:20 Check angles 12:24:20 SkyScan query 12:24:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:24:21 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:24:21 Message to Master queued w/err=0: serial=221259 error=0 12:24:26 Received message from Master: op=Filter serial=221260 12:24:26 Color wheel filter change from 0 to 0 12:24:26 FLIGetFilterPos err=0 currentPosition=0 12:24:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:26 Filter is already there-color wheel unchanged 12:24:26 Received message from Master: op=Shutter serial=221261 12:24:26 Shutter LASER close 12:24:26 Received message from Camera: op=State serial=221263 12:24:26 GetSingleValue result=40 Value=cccccccc 12:24:26 SkyScan query 12:24:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:24:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:26 Parameters OK 12:24:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:26 Set A/D data flow result=40 12:24:26 Set A/D channel type result=40 12:24:26 Set A/D encoding result=40 12:24:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:26 Set channel filter=0.000000e+000 result=40 12:24:26 Config A/D Result=40 12:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:26 Get A/D filter: -9.255963e+061 result=40 12:24:26 Get A/D value=-858993460 result=40 12:24:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:26 Parameters OK 12:24:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:26 Set A/D data flow result=40 12:24:26 Set A/D channel type result=40 12:24:26 Set A/D encoding result=40 12:24:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:26 Set channel filter=0.000000e+000 result=40 12:24:26 Config A/D Result=40 12:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:26 Get A/D filter: -9.255963e+061 result=40 12:24:26 Get A/D value=-858993460 result=40 12:24:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:26 Aux= 12:24:26 Message to Camera, serial 221263 queued 12:25:03 Received message from Master: op=PointingHead serial=221276 12:25:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:25:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:25:04 Point started: ret=0 12:25:04 point_skyscan result=0 12:25:04 Check angles 12:25:04 SkyScan query 12:25:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 12:25:05 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 12:25:05 Check angles 12:25:05 SkyScan query 12:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:25:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:25:06 Message to Master queued w/err=0: serial=221276 error=0 12:25:11 Received message from Master: op=Filter serial=221277 12:25:11 Color wheel filter change from 0 to 0 12:25:11 FLIGetFilterPos err=0 currentPosition=0 12:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:11 Filter is already there-color wheel unchanged 12:25:11 Received message from Master: op=Shutter serial=221278 12:25:11 Shutter LASER open 12:25:11 Received message from Camera: op=State serial=221280 12:25:11 GetSingleValue result=40 Value=cccccccc 12:25:11 SkyScan query 12:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:12 Parameters OK 12:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:12 Set A/D data flow result=40 12:25:12 Set A/D channel type result=40 12:25:12 Set A/D encoding result=40 12:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:12 Set channel filter=0.000000e+000 result=40 12:25:12 Config A/D Result=40 12:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:12 Get A/D filter: -9.255963e+061 result=40 12:25:12 Get A/D value=-858993460 result=40 12:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:12 Parameters OK 12:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:12 Set A/D data flow result=40 12:25:12 Set A/D channel type result=40 12:25:12 Set A/D encoding result=40 12:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:12 Set channel filter=0.000000e+000 result=40 12:25:12 Config A/D Result=40 12:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:12 Get A/D filter: -9.255963e+061 result=40 12:25:12 Get A/D value=-858993460 result=40 12:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:12 Aux= 12:25:12 Message to Camera, serial 221280 queued 12:25:20 Received message from Master: op=Shutter serial=221290 12:25:20 Shutter LASER close 12:25:21 Received message from Master: op=PointingHead serial=221294 12:25:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:25:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:25:21 Point started: ret=0 12:25:21 point_skyscan result=0 12:25:22 Check angles 12:25:22 SkyScan query 12:25:22 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.505<-21567 Statuses=0009 0009 12:25:22 Msec=0 True Az=135.705 Ze=-143.505 Az status=0009 Ze status=0009 12:25:23 Check angles 12:25:23 SkyScan query 12:25:23 SkyScan query done: ret=0 az=153.315<-10221 ze=-122.535<-20169 Statuses=0009 0009 12:25:23 Msec=750 True Az=153.315 Ze=-122.535 Az status=0009 Ze status=0009 12:25:23 Check angles 12:25:23 SkyScan query 12:25:24 SkyScan query done: ret=0 az=170.715<-11381 ze=-101.625<-18775 Statuses=0009 0009 12:25:24 Msec=1500 True Az=170.715 Ze=-101.625 Az status=0009 Ze status=0009 12:25:24 Check angles 12:25:24 SkyScan query 12:25:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.61<-17374 Statuses=0008 0009 12:25:25 Msec=2250 True Az=175.995 Ze=-80.61 Az status=0008 Ze status=0009 12:25:25 Check angles 12:25:25 SkyScan query 12:25:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.235<-15949 Statuses=0008 0009 12:25:25 Msec=3000 True Az=175.995 Ze=-59.235 Az status=0008 Ze status=0009 12:25:26 Check angles 12:25:26 SkyScan query 12:25:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:25:26 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:25:26 Message to Master queued w/err=0: serial=221294 error=0 12:25:31 Received message from Master: op=Filter serial=221295 12:25:31 Color wheel filter change from 0 to 0 12:25:31 FLIGetFilterPos err=0 currentPosition=0 12:25:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:31 Filter is already there-color wheel unchanged 12:25:31 Received message from Master: op=Shutter serial=221296 12:25:31 Shutter LASER close 12:25:31 Received message from Camera: op=State serial=221298 12:25:31 GetSingleValue result=40 Value=cccccccc 12:25:31 SkyScan query 12:25:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:25:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:32 Parameters OK 12:25:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:32 Set A/D data flow result=40 12:25:32 Set A/D channel type result=40 12:25:32 Set A/D encoding result=40 12:25:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:32 Set channel filter=0.000000e+000 result=40 12:25:32 Config A/D Result=40 12:25:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:32 Get A/D filter: -9.255963e+061 result=40 12:25:32 Get A/D value=-858993460 result=40 12:25:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:32 Parameters OK 12:25:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:32 Set A/D data flow result=40 12:25:32 Set A/D channel type result=40 12:25:32 Set A/D encoding result=40 12:25:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:32 Set channel filter=0.000000e+000 result=40 12:25:32 Config A/D Result=40 12:25:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:32 Get A/D filter: -9.255963e+061 result=40 12:25:32 Get A/D value=-858993460 result=40 12:25:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:32 Aux= 12:25:32 Message to Camera, serial 221298 queued 12:26:09 Received message from Master: op=PointingHead serial=221311 12:26:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:26:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:26:09 Point started: ret=0 12:26:09 point_skyscan result=0 12:26:10 Check angles 12:26:10 SkyScan query 12:26:11 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.69<-13446 Statuses=0009 0009 12:26:11 Msec=0 True Az=152.955 Ze=-21.69 Az status=0009 Ze status=0009 12:26:11 Check angles 12:26:11 SkyScan query 12:26:11 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.255<-12017 Statuses=0009 0009 12:26:11 Msec=750 True Az=135.12 Ze=-0.255 Az status=0009 Ze status=0009 12:26:11 Check angles 12:26:11 SkyScan query [UTC 2018-12-17 12:26:12] 12:26:12 SkyScan query done: ret=0 az=117.615<-7841 ze=20.685<-10621 Statuses=0009 0009 12:26:12 Msec=1500 True Az=117.615 Ze=20.685 Az status=0009 Ze status=0009 12:26:12 Check angles 12:26:12 SkyScan query 12:26:13 SkyScan query done: ret=0 az=100.245<-6683 ze=41.655<-9223 Statuses=0009 0009 12:26:13 Msec=2250 True Az=100.245 Ze=41.655 Az status=0009 Ze status=0009 12:26:13 Check angles 12:26:13 SkyScan query 12:26:14 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 12:26:14 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 12:26:14 Check angles 12:26:14 SkyScan query 12:26:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:26:14 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:26:14 Message to Master queued w/err=0: serial=221311 error=0 12:26:19 Received message from Master: op=Filter serial=221312 12:26:19 Color wheel filter change from 0 to 0 12:26:19 FLIGetFilterPos err=0 currentPosition=0 12:26:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:19 Filter is already there-color wheel unchanged 12:26:19 Received message from Master: op=Shutter serial=221313 12:26:19 Shutter LASER close 12:26:20 Received message from Camera: op=State serial=221315 12:26:20 GetSingleValue result=40 Value=cccccccc 12:26:20 SkyScan query 12:26:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:26:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:20 Parameters OK 12:26:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:20 Set A/D data flow result=40 12:26:20 Set A/D channel type result=40 12:26:20 Set A/D encoding result=40 12:26:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:20 Set channel filter=0.000000e+000 result=40 12:26:20 Config A/D Result=40 12:26:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:20 Get A/D filter: -9.255963e+061 result=40 12:26:20 Get A/D value=-858993460 result=40 12:26:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:20 Parameters OK 12:26:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:20 Set A/D data flow result=40 12:26:20 Set A/D channel type result=40 12:26:20 Set A/D encoding result=40 12:26:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:20 Set channel filter=0.000000e+000 result=40 12:26:20 Config A/D Result=40 12:26:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:20 Get A/D filter: -9.255963e+061 result=40 12:26:20 Get A/D value=-858993460 result=40 12:26:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:20 Aux= 12:26:20 Message to Camera, serial 221315 queued 12:26:57 Received message from Master: op=PointingHead serial=221328 12:26:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:26:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:26:57 Point started: ret=0 12:26:57 point_skyscan result=0 12:26:58 Check angles 12:26:58 SkyScan query 12:26:59 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 12:26:59 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 12:26:59 Check angles 12:26:59 SkyScan query 12:26:59 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 12:26:59 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 12:27:00 Check angles 12:27:00 SkyScan query 12:27:00 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 12:27:00 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 12:27:00 Check angles 12:27:00 SkyScan query 12:27:01 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 12:27:01 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 12:27:01 Check angles 12:27:01 SkyScan query 12:27:02 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:27:02 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:27:02 Check angles 12:27:02 SkyScan query 12:27:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:27:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:27:02 Message to Master queued w/err=0: serial=221328 error=0 12:27:07 Received message from Master: op=Filter serial=221329 12:27:07 Color wheel filter change from 0 to 0 12:27:07 FLIGetFilterPos err=0 currentPosition=0 12:27:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:07 Filter is already there-color wheel unchanged 12:27:08 Received message from Master: op=Shutter serial=221330 12:27:08 Shutter LASER close 12:27:08 Received message from Camera: op=State serial=221332 12:27:08 GetSingleValue result=40 Value=cccccccc 12:27:08 SkyScan query 12:27:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:27:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:08 Parameters OK 12:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:08 Set A/D data flow result=40 12:27:08 Set A/D channel type result=40 12:27:08 Set A/D encoding result=40 12:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:08 Set channel filter=0.000000e+000 result=40 12:27:08 Config A/D Result=40 12:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:08 Get A/D filter: -9.255963e+061 result=40 12:27:08 Get A/D value=-858993460 result=40 12:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:08 Parameters OK 12:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:08 Set A/D data flow result=40 12:27:08 Set A/D channel type result=40 12:27:08 Set A/D encoding result=40 12:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:08 Set channel filter=0.000000e+000 result=40 12:27:08 Config A/D Result=40 12:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:08 Get A/D filter: -9.255963e+061 result=40 12:27:08 Get A/D value=-858993460 result=40 12:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:08 Aux= 12:27:08 Message to Camera, serial 221332 queued 12:27:45 Received message from Master: op=PointingHead serial=221345 12:27:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:27:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:27:45 Point started: ret=0 12:27:45 point_skyscan result=0 12:27:46 Check angles 12:27:46 SkyScan query 12:27:47 SkyScan query done: ret=0 az=152.58<-10172 ze=8.115<-11459 Statuses=0009 0009 12:27:47 Msec=0 True Az=152.58 Ze=8.115 Az status=0009 Ze status=0009 12:27:47 Check angles 12:27:47 SkyScan query 12:27:47 SkyScan query done: ret=0 az=135.045<-9003 ze=-12.795<-12853 Statuses=0009 0009 12:27:47 Msec=750 True Az=135.045 Ze=-12.795 Az status=0009 Ze status=0009 12:27:48 Check angles 12:27:48 SkyScan query 12:27:48 SkyScan query done: ret=0 az=117.15<-7810 ze=-34.215<-14281 Statuses=0009 0009 12:27:48 Msec=1500 True Az=117.15 Ze=-34.215 Az status=0009 Ze status=0009 12:27:48 Check angles 12:27:48 SkyScan query 12:27:49 SkyScan query done: ret=0 az=99.405<-6627 ze=-51.555<-15437 Statuses=0009 0009 12:27:49 Msec=2250 True Az=99.405 Ze=-51.555 Az status=0009 Ze status=0009 12:27:49 Check angles 12:27:49 SkyScan query 12:27:50 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 12:27:50 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 12:27:50 Check angles 12:27:50 SkyScan query 12:27:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:27:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:27:50 Message to Master queued w/err=0: serial=221345 error=0 12:27:55 Received message from Master: op=Filter serial=221346 12:27:55 Color wheel filter change from 0 to 0 12:27:55 FLIGetFilterPos err=0 currentPosition=0 12:27:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:55 Filter is already there-color wheel unchanged 12:27:56 Received message from Master: op=Shutter serial=221347 12:27:56 Shutter LASER close 12:27:56 Received message from Camera: op=State serial=221349 12:27:56 GetSingleValue result=40 Value=cccccccc 12:27:56 SkyScan query 12:27:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:27:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:56 Parameters OK 12:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:56 Set A/D data flow result=40 12:27:56 Set A/D channel type result=40 12:27:56 Set A/D encoding result=40 12:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:56 Set channel filter=0.000000e+000 result=40 12:27:56 Config A/D Result=40 12:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:56 Get A/D filter: -9.255963e+061 result=40 12:27:56 Get A/D value=-858993460 result=40 12:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:56 Parameters OK 12:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:56 Set A/D data flow result=40 12:27:56 Set A/D channel type result=40 12:27:56 Set A/D encoding result=40 12:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:56 Set channel filter=0.000000e+000 result=40 12:27:56 Config A/D Result=40 12:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:56 Get A/D filter: -9.255963e+061 result=40 12:27:56 Get A/D value=-858993460 result=40 12:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:56 Aux= 12:27:56 Message to Camera, serial 221349 queued 12:28:33 Received message from Master: op=PointingHead serial=221362 12:28:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:28:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:28:33 Point started: ret=0 12:28:33 point_skyscan result=0 12:28:34 Check angles 12:28:34 SkyScan query 12:28:35 SkyScan query done: ret=0 az=108.87<-7258 ze=-81<-17400 Statuses=0009 0009 12:28:35 Msec=0 True Az=108.87 Ze=-81 Az status=0009 Ze status=0009 12:28:35 Check angles 12:28:35 SkyScan query 12:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 12:28:36 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 12:28:36 Check angles 12:28:36 SkyScan query 12:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.91<-20194 Statuses=0008 0009 12:28:36 Msec=1500 True Az=112.995 Ze=-122.91 Az status=0008 Ze status=0009 12:28:36 Check angles 12:28:36 SkyScan query 12:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.865<-21591 Statuses=0008 0009 12:28:37 Msec=2250 True Az=112.995 Ze=-143.865 Az status=0008 Ze status=0009 12:28:37 Check angles 12:28:37 SkyScan query 12:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.805<-22987 Statuses=0008 0009 12:28:38 Msec=3000 True Az=112.995 Ze=-164.805 Az status=0008 Ze status=0009 12:28:38 Check angles 12:28:38 SkyScan query 12:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:28:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:28:39 Message to Master queued w/err=0: serial=221362 error=0 12:28:44 Received message from Master: op=Filter serial=221363 12:28:44 Color wheel filter change from 0 to 0 12:28:44 FLIGetFilterPos err=0 currentPosition=0 12:28:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:44 Filter is already there-color wheel unchanged 12:28:44 Received message from Master: op=Shutter serial=221364 12:28:44 Shutter LASER open 12:28:44 Received message from Camera: op=State serial=221366 12:28:44 GetSingleValue result=40 Value=cccccccc 12:28:44 SkyScan query 12:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:28:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:44 Parameters OK 12:28:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:44 Set A/D data flow result=40 12:28:44 Set A/D channel type result=40 12:28:44 Set A/D encoding result=40 12:28:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:44 Set channel filter=0.000000e+000 result=40 12:28:44 Config A/D Result=40 12:28:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:44 Get A/D filter: -9.255963e+061 result=40 12:28:44 Get A/D value=-858993460 result=40 12:28:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:44 Parameters OK 12:28:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:44 Set A/D data flow result=40 12:28:44 Set A/D channel type result=40 12:28:44 Set A/D encoding result=40 12:28:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:44 Set channel filter=0.000000e+000 result=40 12:28:44 Config A/D Result=40 12:28:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:44 Get A/D filter: -9.255963e+061 result=40 12:28:44 Get A/D value=-858993460 result=40 12:28:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:44 Aux= 12:28:44 Message to Camera, serial 221366 queued 12:28:52 Received message from Master: op=Shutter serial=221375 12:28:52 Shutter LASER close 12:28:52 Received message from Master: op=PointingHead serial=221379 12:28:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:28:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:28:53 Point started: ret=0 12:28:53 point_skyscan result=0 12:28:53 Check angles 12:28:53 SkyScan query 12:28:54 SkyScan query done: ret=0 az=90.18<-6012 ze=157.545<-1497 Statuses=0009 0009 12:28:54 Msec=0 True Az=90.18 Ze=157.545 Az status=0009 Ze status=0009 12:28:54 Check angles 12:28:54 SkyScan query 12:28:55 SkyScan query done: ret=0 az=72.285<-4819 ze=136.125<-2925 Statuses=0009 0009 12:28:55 Msec=750 True Az=72.285 Ze=136.125 Az status=0009 Ze status=0009 12:28:55 Check angles 12:28:55 SkyScan query 12:28:56 SkyScan query done: ret=0 az=54.975<-3665 ze=115.2<-4320 Statuses=0009 0009 12:28:56 Msec=1500 True Az=54.975 Ze=115.2 Az status=0009 Ze status=0009 12:28:56 Check angles 12:28:56 SkyScan query 12:28:56 SkyScan query done: ret=0 az=41.01<-2734 ze=94.215<-5719 Statuses=0009 0009 12:28:56 Msec=2250 True Az=41.01 Ze=94.215 Az status=0009 Ze status=0009 12:28:57 Check angles 12:28:57 SkyScan query 12:28:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.795<-7147 Statuses=0008 0009 12:28:57 Msec=3000 True Az=40.995 Ze=72.795 Az status=0008 Ze status=0009 12:28:57 Check angles 12:28:57 SkyScan query 12:28:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.23<-8518 Statuses=0008 0009 12:28:58 Msec=3750 True Az=40.995 Ze=52.23 Az status=0008 Ze status=0009 12:28:58 Check angles 12:28:58 SkyScan query 12:28:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:28:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:28:59 Message to Master queued w/err=0: serial=221379 error=0 12:29:04 Received message from Master: op=Filter serial=221380 12:29:04 Color wheel filter change from 0 to 0 12:29:04 FLIGetFilterPos err=0 currentPosition=0 12:29:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:04 Filter is already there-color wheel unchanged 12:29:04 Received message from Master: op=Shutter serial=221381 12:29:04 Shutter LASER close 12:29:04 Received message from Camera: op=State serial=221383 12:29:04 GetSingleValue result=40 Value=cccccccc 12:29:04 SkyScan query 12:29:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:29:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:05 Parameters OK 12:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:05 Set A/D data flow result=40 12:29:05 Set A/D channel type result=40 12:29:05 Set A/D encoding result=40 12:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:05 Set channel filter=0.000000e+000 result=40 12:29:05 Config A/D Result=40 12:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:05 Get A/D filter: -9.255963e+061 result=40 12:29:05 Get A/D value=-858993460 result=40 12:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:05 Parameters OK 12:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:05 Set A/D data flow result=40 12:29:05 Set A/D channel type result=40 12:29:05 Set A/D encoding result=40 12:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:05 Set channel filter=0.000000e+000 result=40 12:29:05 Config A/D Result=40 12:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:05 Get A/D filter: -9.255963e+061 result=40 12:29:05 Get A/D value=-858993460 result=40 12:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:05 Aux= 12:29:05 Message to Camera, serial 221383 queued 12:29:41 Received message from Master: op=PointingHead serial=221396 12:29:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:29:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:29:42 Point started: ret=0 12:29:42 point_skyscan result=0 12:29:42 Check angles 12:29:42 SkyScan query 12:29:43 SkyScan query done: ret=0 az=63.99<-4266 ze=66.54<-7564 Statuses=0009 0008 12:29:43 Msec=0 True Az=63.99 Ze=66.54 Az status=0009 Ze status=0008 12:29:43 Check angles 12:29:43 SkyScan query 12:29:44 SkyScan query done: ret=0 az=81.405<-5427 ze=66.51<-7566 Statuses=0009 0008 12:29:44 Msec=750 True Az=81.405 Ze=66.51 Az status=0009 Ze status=0008 12:29:44 Check angles 12:29:44 SkyScan query 12:29:45 SkyScan query done: ret=0 az=99<-6600 ze=66.495<-7567 Statuses=0009 0008 12:29:45 Msec=1500 True Az=99 Ze=66.495 Az status=0009 Ze status=0008 12:29:45 Check angles 12:29:45 SkyScan query 12:29:45 SkyScan query done: ret=0 az=116.325<-7755 ze=66.495<-7567 Statuses=0009 0008 12:29:45 Msec=2250 True Az=116.325 Ze=66.495 Az status=0009 Ze status=0008 12:29:45 Check angles 12:29:45 SkyScan query 12:29:46 SkyScan query done: ret=0 az=133.875<-8925 ze=66.495<-7567 Statuses=0009 0008 12:29:46 Msec=3000 True Az=133.875 Ze=66.495 Az status=0009 Ze status=0008 12:29:46 Check angles 12:29:46 SkyScan query 12:29:47 SkyScan query done: ret=0 az=151.305<-10087 ze=66.495<-7567 Statuses=0009 0008 12:29:47 Msec=3750 True Az=151.305 Ze=66.495 Az status=0009 Ze status=0008 12:29:47 Check angles 12:29:47 SkyScan query 12:29:48 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:29:48 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:29:48 Message to Master queued w/err=0: serial=221396 error=0 12:29:53 Received message from Master: op=Filter serial=221397 12:29:53 Color wheel filter change from 0 to 0 12:29:53 FLIGetFilterPos err=0 currentPosition=0 12:29:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:53 Filter is already there-color wheel unchanged 12:29:53 Received message from Master: op=Shutter serial=221398 12:29:53 Shutter LASER close 12:29:53 Received message from Camera: op=State serial=221400 12:29:53 GetSingleValue result=40 Value=cccccccc 12:29:53 SkyScan query 12:29:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:29:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:53 Parameters OK 12:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:53 Set A/D data flow result=40 12:29:53 Set A/D channel type result=40 12:29:53 Set A/D encoding result=40 12:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:53 Set channel filter=0.000000e+000 result=40 12:29:53 Config A/D Result=40 12:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:53 Get A/D filter: -9.255963e+061 result=40 12:29:53 Get A/D value=-858993460 result=40 12:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:53 Parameters OK 12:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:53 Set A/D data flow result=40 12:29:53 Set A/D channel type result=40 12:29:53 Set A/D encoding result=40 12:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:53 Set channel filter=0.000000e+000 result=40 12:29:53 Config A/D Result=40 12:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:53 Get A/D filter: -9.255963e+061 result=40 12:29:53 Get A/D value=-858993460 result=40 12:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:53 Aux= 12:29:53 Message to Camera, serial 221400 queued 12:30:30 Received message from Master: op=PointingHead serial=221413 12:30:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:30:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:30:30 Point started: ret=0 12:30:30 point_skyscan result=0 12:30:31 Check angles 12:30:31 SkyScan query 12:30:32 SkyScan query done: ret=0 az=134.76<-8984 ze=36.69<-9554 Statuses=0009 0009 12:30:32 Msec=0 True Az=134.76 Ze=36.69 Az status=0009 Ze status=0009 12:30:32 Check angles 12:30:32 SkyScan query 12:30:33 SkyScan query done: ret=0 az=116.91<-7794 ze=15.33<-10978 Statuses=0009 0009 12:30:33 Msec=750 True Az=116.91 Ze=15.33 Az status=0009 Ze status=0009 12:30:33 Check angles 12:30:33 SkyScan query 12:30:33 SkyScan query done: ret=0 az=99.09<-6606 ze=-6.12<-12408 Statuses=0009 0009 12:30:33 Msec=1500 True Az=99.09 Ze=-6.12 Az status=0009 Ze status=0009 12:30:34 Check angles 12:30:34 SkyScan query 12:30:34 SkyScan query done: ret=0 az=81.33<-5422 ze=-27.555<-13837 Statuses=0009 0009 12:30:34 Msec=2250 True Az=81.33 Ze=-27.555 Az status=0009 Ze status=0009 12:30:34 Check angles 12:30:34 SkyScan query 12:30:35 SkyScan query done: ret=0 az=63.675<-4245 ze=-38.58<-14572 Statuses=0009 0008 12:30:35 Msec=3000 True Az=63.675 Ze=-38.58 Az status=0009 Ze status=0008 12:30:35 Check angles 12:30:35 SkyScan query 12:30:36 SkyScan query done: ret=0 az=46.485<-3099 ze=-38.52<-14568 Statuses=0009 0008 12:30:36 Msec=3750 True Az=46.485 Ze=-38.52 Az status=0009 Ze status=0008 12:30:36 Check angles 12:30:36 SkyScan query 12:30:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:30:36 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:30:36 Message to Master queued w/err=0: serial=221413 error=0 12:30:41 Received message from Master: op=Filter serial=221414 12:30:41 Color wheel filter change from 0 to 0 12:30:41 FLIGetFilterPos err=0 currentPosition=0 12:30:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:41 Filter is already there-color wheel unchanged 12:30:42 Received message from Master: op=Shutter serial=221415 12:30:42 Shutter LASER close 12:30:42 Received message from Camera: op=State serial=221417 12:30:42 GetSingleValue result=40 Value=cccccccc 12:30:42 SkyScan query 12:30:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:30:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:42 Parameters OK 12:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:42 Set A/D data flow result=40 12:30:42 Set A/D channel type result=40 12:30:42 Set A/D encoding result=40 12:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:42 Set channel filter=0.000000e+000 result=40 12:30:42 Config A/D Result=40 12:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:42 Get A/D filter: -9.255963e+061 result=40 12:30:42 Get A/D value=-858993460 result=40 12:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:42 Parameters OK 12:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:42 Set A/D data flow result=40 12:30:42 Set A/D channel type result=40 12:30:42 Set A/D encoding result=40 12:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:42 Set channel filter=0.000000e+000 result=40 12:30:42 Config A/D Result=40 12:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:42 Get A/D filter: -9.255963e+061 result=40 12:30:42 Get A/D value=-858993460 result=40 12:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:42 Aux= 12:30:42 Message to Camera, serial 221417 queued 12:31:19 Received message from Master: op=PointingHead serial=221430 12:31:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:31:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:31:19 Point started: ret=0 12:31:19 point_skyscan result=0 12:31:20 Check angles 12:31:20 SkyScan query 12:31:21 SkyScan query done: ret=0 az=64.425<-4295 ze=-68.745<-16583 Statuses=0009 0009 12:31:21 Msec=0 True Az=64.425 Ze=-68.745 Az status=0009 Ze status=0009 12:31:21 Check angles 12:31:21 SkyScan query 12:31:21 SkyScan query done: ret=0 az=82.14<-5476 ze=-90.105<-18007 Statuses=0009 0009 12:31:21 Msec=750 True Az=82.14 Ze=-90.105 Az status=0009 Ze status=0009 12:31:22 Check angles 12:31:22 SkyScan query 12:31:22 SkyScan query done: ret=0 az=100.17<-6678 ze=-111.48<-19432 Statuses=0009 0009 12:31:22 Msec=1500 True Az=100.17 Ze=-111.48 Az status=0009 Ze status=0009 12:31:22 Check angles 12:31:22 SkyScan query 12:31:23 SkyScan query done: ret=0 az=117.57<-7838 ze=-132.435<-20829 Statuses=0009 0009 12:31:23 Msec=2250 True Az=117.57 Ze=-132.435 Az status=0009 Ze status=0009 12:31:23 Check angles 12:31:23 SkyScan query 12:31:24 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 12:31:24 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 12:31:24 Check angles 12:31:24 SkyScan query 12:31:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:31:24 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:31:24 Message to Master queued w/err=0: serial=221430 error=0 12:31:29 Received message from Master: op=Filter serial=221431 12:31:29 Color wheel filter change from 0 to 0 12:31:29 FLIGetFilterPos err=0 currentPosition=0 12:31:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:29 Filter is already there-color wheel unchanged 12:31:30 Received message from Master: op=Shutter serial=221432 12:31:30 Shutter LASER close 12:31:30 Received message from Camera: op=State serial=221434 12:31:30 GetSingleValue result=40 Value=cccccccc 12:31:30 SkyScan query 12:31:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:31:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:30 Parameters OK 12:31:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:30 Set A/D data flow result=40 12:31:30 Set A/D channel type result=40 12:31:30 Set A/D encoding result=40 12:31:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:30 Set channel filter=0.000000e+000 result=40 12:31:30 Config A/D Result=40 12:31:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:30 Get A/D filter: -9.255963e+061 result=40 12:31:30 Get A/D value=-858993460 result=40 12:31:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:30 Parameters OK 12:31:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:30 Set A/D data flow result=40 12:31:30 Set A/D channel type result=40 12:31:30 Set A/D encoding result=40 12:31:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:30 Set channel filter=0.000000e+000 result=40 12:31:30 Config A/D Result=40 12:31:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:30 Get A/D filter: -9.255963e+061 result=40 12:31:30 Get A/D value=-858993460 result=40 12:31:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:30 Aux= 12:31:30 Message to Camera, serial 221434 queued 12:32:07 Received message from Master: op=PointingHead serial=221447 12:32:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:32:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:32:08 Point started: ret=0 12:32:08 point_skyscan result=0 12:32:08 Check angles 12:32:08 SkyScan query 12:32:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0008 0009 12:32:09 Msec=0 True Az=112.995 Ze=-171.42 Az status=0008 Ze status=0009 12:32:09 Check angles 12:32:09 SkyScan query 12:32:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:32:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:32:10 Message to Master queued w/err=0: serial=221447 error=0 12:32:15 Received message from Master: op=Filter serial=221448 12:32:15 Color wheel filter change from 0 to 0 12:32:15 FLIGetFilterPos err=0 currentPosition=0 12:32:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:15 Filter is already there-color wheel unchanged 12:32:15 Received message from Master: op=Shutter serial=221449 12:32:15 Shutter LASER open 12:32:15 Received message from Camera: op=State serial=221451 12:32:15 GetSingleValue result=40 Value=cccccccc 12:32:15 SkyScan query 12:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:32:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:16 Parameters OK 12:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:16 Set A/D data flow result=40 12:32:16 Set A/D channel type result=40 12:32:16 Set A/D encoding result=40 12:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:16 Set channel filter=0.000000e+000 result=40 12:32:16 Config A/D Result=40 12:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:16 Get A/D filter: -9.255963e+061 result=40 12:32:16 Get A/D value=-858993460 result=40 12:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:16 Parameters OK 12:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:16 Set A/D data flow result=40 12:32:16 Set A/D channel type result=40 12:32:16 Set A/D encoding result=40 12:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:16 Set channel filter=0.000000e+000 result=40 12:32:16 Config A/D Result=40 12:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:16 Get A/D filter: -9.255963e+061 result=40 12:32:16 Get A/D value=-858993460 result=40 12:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:16 Aux= 12:32:16 Message to Camera, serial 221451 queued 12:32:24 Received message from Master: op=Shutter serial=221461 12:32:24 Shutter LASER close 12:32:25 Received message from Master: op=PointingHead serial=221465 12:32:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:32:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:32:25 Point started: ret=0 12:32:25 point_skyscan result=0 12:32:26 Check angles 12:32:26 SkyScan query 12:32:26 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.205<-21547 Statuses=0009 0009 12:32:26 Msec=0 True Az=135.945 Ze=-143.205 Az status=0009 Ze status=0009 12:32:26 Check angles 12:32:26 SkyScan query 12:32:27 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.22<-20148 Statuses=0009 0009 12:32:27 Msec=750 True Az=153.48 Ze=-122.22 Az status=0009 Ze status=0009 12:32:27 Check angles 12:32:27 SkyScan query 12:32:28 SkyScan query done: ret=0 az=170.925<-11395 ze=-101.355<-18757 Statuses=0009 0009 12:32:28 Msec=1500 True Az=170.925 Ze=-101.355 Az status=0009 Ze status=0009 12:32:28 Check angles 12:32:28 SkyScan query 12:32:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.355<-17357 Statuses=0008 0009 12:32:29 Msec=2250 True Az=175.995 Ze=-80.355 Az status=0008 Ze status=0009 12:32:29 Check angles 12:32:29 SkyScan query 12:32:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.4<-15960 Statuses=0008 0009 12:32:29 Msec=3000 True Az=175.995 Ze=-59.4 Az status=0008 Ze status=0009 12:32:29 Check angles 12:32:29 SkyScan query 12:32:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:32:30 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:32:30 Message to Master queued w/err=0: serial=221465 error=0 12:32:35 Received message from Master: op=Filter serial=221466 12:32:35 Color wheel filter change from 0 to 0 12:32:35 FLIGetFilterPos err=0 currentPosition=0 12:32:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:35 Filter is already there-color wheel unchanged 12:32:35 Received message from Master: op=Shutter serial=221467 12:32:35 Shutter LASER close 12:32:35 Received message from Camera: op=State serial=221469 12:32:35 GetSingleValue result=40 Value=cccccccc 12:32:35 SkyScan query 12:32:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:32:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:36 Parameters OK 12:32:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:36 Set A/D data flow result=40 12:32:36 Set A/D channel type result=40 12:32:36 Set A/D encoding result=40 12:32:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:36 Set channel filter=0.000000e+000 result=40 12:32:36 Config A/D Result=40 12:32:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:36 Get A/D filter: -9.255963e+061 result=40 12:32:36 Get A/D value=-858993460 result=40 12:32:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:36 Parameters OK 12:32:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:36 Set A/D data flow result=40 12:32:36 Set A/D channel type result=40 12:32:36 Set A/D encoding result=40 12:32:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:36 Set channel filter=0.000000e+000 result=40 12:32:36 Config A/D Result=40 12:32:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:36 Get A/D filter: -9.255963e+061 result=40 12:32:36 Get A/D value=-858993460 result=40 12:32:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:36 Aux= 12:32:36 Message to Camera, serial 221469 queued 12:33:13 Received message from Master: op=PointingHead serial=221482 12:33:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:33:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:33:13 Point started: ret=0 12:33:13 point_skyscan result=0 12:33:14 Check angles 12:33:14 SkyScan query 12:33:15 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.735<-13449 Statuses=0009 0009 12:33:15 Msec=0 True Az=152.94 Ze=-21.735 Az status=0009 Ze status=0009 12:33:15 Check angles 12:33:15 SkyScan query 12:33:15 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.75<-12050 Statuses=0009 0009 12:33:15 Msec=750 True Az=135.57 Ze=-0.75 Az status=0009 Ze status=0009 12:33:15 Check angles 12:33:15 SkyScan query 12:33:16 SkyScan query done: ret=0 az=118.035<-7869 ze=20.175<-10655 Statuses=0009 0009 12:33:16 Msec=1500 True Az=118.035 Ze=20.175 Az status=0009 Ze status=0009 12:33:16 Check angles 12:33:16 SkyScan query 12:33:17 SkyScan query done: ret=0 az=100.575<-6705 ze=41.16<-9256 Statuses=0009 0009 12:33:17 Msec=2250 True Az=100.575 Ze=41.16 Az status=0009 Ze status=0009 12:33:17 Check angles 12:33:17 SkyScan query 12:33:18 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 12:33:18 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 12:33:18 Check angles 12:33:18 SkyScan query 12:33:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:33:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:33:18 Message to Master queued w/err=0: serial=221482 error=0 12:33:23 Received message from Master: op=Filter serial=221483 12:33:23 Color wheel filter change from 0 to 0 12:33:23 FLIGetFilterPos err=0 currentPosition=0 12:33:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:23 Filter is already there-color wheel unchanged 12:33:23 Received message from Master: op=Shutter serial=221484 12:33:23 Shutter LASER close 12:33:23 Received message from Camera: op=State serial=221486 12:33:23 GetSingleValue result=40 Value=cccccccc 12:33:23 SkyScan query 12:33:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:33:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:24 Parameters OK 12:33:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:24 Set A/D data flow result=40 12:33:24 Set A/D channel type result=40 12:33:24 Set A/D encoding result=40 12:33:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:24 Set channel filter=0.000000e+000 result=40 12:33:24 Config A/D Result=40 12:33:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:24 Get A/D filter: -9.255963e+061 result=40 12:33:24 Get A/D value=-858993460 result=40 12:33:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:24 Parameters OK 12:33:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:24 Set A/D data flow result=40 12:33:24 Set A/D channel type result=40 12:33:24 Set A/D encoding result=40 12:33:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:24 Set channel filter=0.000000e+000 result=40 12:33:24 Config A/D Result=40 12:33:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:24 Get A/D filter: -9.255963e+061 result=40 12:33:24 Get A/D value=-858993460 result=40 12:33:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:24 Aux= 12:33:24 Message to Camera, serial 221486 queued 12:34:01 Received message from Master: op=PointingHead serial=221499 12:34:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:34:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:34:01 Point started: ret=0 12:34:01 point_skyscan result=0 12:34:02 Check angles 12:34:02 SkyScan query 12:34:03 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 12:34:03 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 12:34:03 Check angles 12:34:03 SkyScan query 12:34:03 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 12:34:03 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 12:34:03 Check angles 12:34:03 SkyScan query 12:34:04 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 12:34:04 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 12:34:04 Check angles 12:34:04 SkyScan query 12:34:05 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 12:34:05 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 12:34:05 Check angles 12:34:05 SkyScan query 12:34:06 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:34:06 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:34:06 Check angles 12:34:06 SkyScan query 12:34:06 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:34:06 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:34:06 Message to Master queued w/err=0: serial=221499 error=0 12:34:11 Received message from Master: op=Filter serial=221500 12:34:11 Color wheel filter change from 0 to 0 12:34:11 FLIGetFilterPos err=0 currentPosition=0 12:34:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:11 Filter is already there-color wheel unchanged 12:34:11 Received message from Master: op=Shutter serial=221501 12:34:11 Shutter LASER close 12:34:12 Received message from Camera: op=State serial=221503 12:34:12 GetSingleValue result=40 Value=cccccccc 12:34:12 SkyScan query 12:34:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:34:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:12 Parameters OK 12:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:12 Set A/D data flow result=40 12:34:12 Set A/D channel type result=40 12:34:12 Set A/D encoding result=40 12:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:12 Set channel filter=0.000000e+000 result=40 12:34:12 Config A/D Result=40 12:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:12 Get A/D filter: -9.255963e+061 result=40 12:34:12 Get A/D value=-858993460 result=40 12:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:12 Parameters OK 12:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:12 Set A/D data flow result=40 12:34:12 Set A/D channel type result=40 12:34:12 Set A/D encoding result=40 12:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:12 Set channel filter=0.000000e+000 result=40 12:34:12 Config A/D Result=40 12:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:12 Get A/D filter: -9.255963e+061 result=40 12:34:12 Get A/D value=-858993460 result=40 12:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:12 Aux= 12:34:12 Message to Camera, serial 221503 queued 12:34:49 Received message from Master: op=PointingHead serial=221516 12:34:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:34:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:34:49 Point started: ret=0 12:34:49 point_skyscan result=0 12:34:50 Check angles 12:34:50 SkyScan query 12:34:51 SkyScan query done: ret=0 az=152.94<-10196 ze=8.655<-11423 Statuses=0009 0009 12:34:51 Msec=0 True Az=152.94 Ze=8.655 Az status=0009 Ze status=0009 12:34:51 Check angles 12:34:51 SkyScan query 12:34:51 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.285<-12819 Statuses=0009 0009 12:34:51 Msec=750 True Az=135.405 Ze=-12.285 Az status=0009 Ze status=0009 12:34:52 Check angles 12:34:52 SkyScan query 12:34:52 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.255<-14217 Statuses=0009 0009 12:34:52 Msec=1500 True Az=118.02 Ze=-33.255 Az status=0009 Ze status=0009 12:34:52 Check angles 12:34:52 SkyScan query 12:34:53 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.54<-15436 Statuses=0009 0009 12:34:53 Msec=2250 True Az=100.575 Ze=-51.54 Az status=0009 Ze status=0009 12:34:53 Check angles 12:34:53 SkyScan query 12:34:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 12:34:54 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 12:34:54 Check angles 12:34:54 SkyScan query 12:34:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:34:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:34:54 Message to Master queued w/err=0: serial=221516 error=0 12:34:59 Received message from Master: op=Filter serial=221517 12:34:59 Color wheel filter change from 0 to 0 12:34:59 FLIGetFilterPos err=0 currentPosition=0 12:34:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:59 Filter is already there-color wheel unchanged 12:35:00 Received message from Master: op=Shutter serial=221518 12:35:00 Shutter LASER close 12:35:00 Received message from Camera: op=State serial=221520 12:35:00 GetSingleValue result=40 Value=cccccccc 12:35:00 SkyScan query 12:35:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:35:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:00 Parameters OK 12:35:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:00 Set A/D data flow result=40 12:35:00 Set A/D channel type result=40 12:35:00 Set A/D encoding result=40 12:35:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:00 Set channel filter=0.000000e+000 result=40 12:35:00 Config A/D Result=40 12:35:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:00 Get A/D filter: -9.255963e+061 result=40 12:35:00 Get A/D value=-858993460 result=40 12:35:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:00 Parameters OK 12:35:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:00 Set A/D data flow result=40 12:35:00 Set A/D channel type result=40 12:35:00 Set A/D encoding result=40 12:35:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:00 Set channel filter=0.000000e+000 result=40 12:35:00 Config A/D Result=40 12:35:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:00 Get A/D filter: -9.255963e+061 result=40 12:35:00 Get A/D value=-858993460 result=40 12:35:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:00 Aux= 12:35:00 Message to Camera, serial 221520 queued 12:35:37 Received message from Master: op=PointingHead serial=221533 12:35:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:35:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:35:37 Point started: ret=0 12:35:37 point_skyscan result=0 12:35:38 Check angles 12:35:38 SkyScan query 12:35:39 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.36<-17424 Statuses=0009 0009 12:35:39 Msec=0 True Az=109.14 Ze=-81.36 Az status=0009 Ze status=0009 12:35:39 Check angles 12:35:39 SkyScan query 12:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 12:35:39 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 12:35:40 Check angles 12:35:40 SkyScan query 12:35:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 12:35:40 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 12:35:40 Check angles 12:35:40 SkyScan query 12:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 12:35:41 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 12:35:41 Check angles 12:35:41 SkyScan query 12:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.035<-23069 Statuses=0008 0009 12:35:42 Msec=3000 True Az=112.995 Ze=-166.035 Az status=0008 Ze status=0009 12:35:42 Check angles 12:35:42 SkyScan query 12:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:35:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:35:42 Message to Master queued w/err=0: serial=221533 error=0 12:35:47 Received message from Master: op=Filter serial=221534 12:35:47 Color wheel filter change from 0 to 0 12:35:47 FLIGetFilterPos err=0 currentPosition=0 12:35:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:47 Filter is already there-color wheel unchanged 12:35:48 Received message from Master: op=Shutter serial=221535 12:35:48 Shutter LASER open 12:35:48 Received message from Camera: op=State serial=221537 12:35:48 GetSingleValue result=40 Value=cccccccc 12:35:48 SkyScan query 12:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:35:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:48 Parameters OK 12:35:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:48 Set A/D data flow result=40 12:35:48 Set A/D channel type result=40 12:35:48 Set A/D encoding result=40 12:35:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:48 Set channel filter=0.000000e+000 result=40 12:35:48 Config A/D Result=40 12:35:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:48 Get A/D filter: -9.255963e+061 result=40 12:35:48 Get A/D value=-858993460 result=40 12:35:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:48 Parameters OK 12:35:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:48 Set A/D data flow result=40 12:35:48 Set A/D channel type result=40 12:35:48 Set A/D encoding result=40 12:35:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:48 Set channel filter=0.000000e+000 result=40 12:35:48 Config A/D Result=40 12:35:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:48 Get A/D filter: -9.255963e+061 result=40 12:35:48 Get A/D value=-858993460 result=40 12:35:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:48 Aux= 12:35:48 Message to Camera, serial 221537 queued [UTC 2018-12-17 12:35:52] 12:35:57 Received message from Master: op=Shutter serial=221547 12:35:57 Shutter LASER close 12:35:57 Received message from Master: op=PointingHead serial=221551 12:35:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:35:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:35:58 Point started: ret=0 12:35:58 point_skyscan result=0 12:35:58 Check angles 12:35:58 SkyScan query 12:35:59 SkyScan query done: ret=0 az=89.94<-5996 ze=157.23<-1518 Statuses=0009 0009 12:35:59 Msec=0 True Az=89.94 Ze=157.23 Az status=0009 Ze status=0009 12:35:59 Check angles 12:35:59 SkyScan query 12:36:00 SkyScan query done: ret=0 az=72.42<-4828 ze=136.26<-2916 Statuses=0009 0009 12:36:00 Msec=750 True Az=72.42 Ze=136.26 Az status=0009 Ze status=0009 12:36:00 Check angles 12:36:00 SkyScan query 12:36:00 SkyScan query done: ret=0 az=54.72<-3648 ze=114.855<-4343 Statuses=0009 0009 12:36:00 Msec=1500 True Az=54.72 Ze=114.855 Az status=0009 Ze status=0009 12:36:01 Check angles 12:36:01 SkyScan query 12:36:01 SkyScan query done: ret=0 az=41.01<-2734 ze=93.945<-5737 Statuses=0009 0009 12:36:01 Msec=2250 True Az=41.01 Ze=93.945 Az status=0009 Ze status=0009 12:36:01 Check angles 12:36:01 SkyScan query 12:36:02 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 12:36:02 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 12:36:02 Check angles 12:36:02 SkyScan query 12:36:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 12:36:03 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 12:36:03 Check angles 12:36:03 SkyScan query 12:36:03 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 12:36:03 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 12:36:03 Message to Master queued w/err=0: serial=221551 error=0 12:36:08 Received message from Master: op=Filter serial=221552 12:36:08 Color wheel filter change from 0 to 0 12:36:08 FLIGetFilterPos err=0 currentPosition=0 12:36:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:08 Filter is already there-color wheel unchanged 12:36:09 Received message from Master: op=Shutter serial=221553 12:36:09 Shutter LASER close 12:36:09 Received message from Camera: op=State serial=221555 12:36:09 GetSingleValue result=40 Value=cccccccc 12:36:09 SkyScan query 12:36:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:36:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:09 Parameters OK 12:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:09 Set A/D data flow result=40 12:36:09 Set A/D channel type result=40 12:36:09 Set A/D encoding result=40 12:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:09 Set channel filter=0.000000e+000 result=40 12:36:09 Config A/D Result=40 12:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:09 Get A/D filter: -9.255963e+061 result=40 12:36:09 Get A/D value=-858993460 result=40 12:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:09 Parameters OK 12:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:09 Set A/D data flow result=40 12:36:09 Set A/D channel type result=40 12:36:09 Set A/D encoding result=40 12:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:09 Set channel filter=0.000000e+000 result=40 12:36:09 Config A/D Result=40 12:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:09 Get A/D filter: -9.255963e+061 result=40 12:36:09 Get A/D value=-858993460 result=40 12:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:09 Aux= 12:36:09 Message to Camera, serial 221555 queued 12:36:46 Received message from Master: op=PointingHead serial=221568 12:36:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:36:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:36:47 Point started: ret=0 12:36:47 point_skyscan result=0 12:36:47 Check angles 12:36:47 SkyScan query 12:36:48 SkyScan query done: ret=0 az=64.515<-4301 ze=66.525<-7565 Statuses=0009 0008 12:36:48 Msec=0 True Az=64.515 Ze=66.525 Az status=0009 Ze status=0008 12:36:48 Check angles 12:36:48 SkyScan query 12:36:49 SkyScan query done: ret=0 az=81.885<-5459 ze=66.51<-7566 Statuses=0009 0008 12:36:49 Msec=750 True Az=81.885 Ze=66.51 Az status=0009 Ze status=0008 12:36:49 Check angles 12:36:49 SkyScan query 12:36:49 SkyScan query done: ret=0 az=99.915<-6661 ze=66.495<-7567 Statuses=0009 0008 12:36:49 Msec=1500 True Az=99.915 Ze=66.495 Az status=0009 Ze status=0008 12:36:50 Check angles 12:36:50 SkyScan query 12:36:50 SkyScan query done: ret=0 az=117.69<-7846 ze=66.495<-7567 Statuses=0009 0008 12:36:50 Msec=2250 True Az=117.69 Ze=66.495 Az status=0009 Ze status=0008 12:36:50 Check angles 12:36:50 SkyScan query 12:36:51 SkyScan query done: ret=0 az=135.285<-9019 ze=66.495<-7567 Statuses=0009 0008 12:36:51 Msec=3000 True Az=135.285 Ze=66.495 Az status=0009 Ze status=0008 12:36:51 Check angles 12:36:51 SkyScan query 12:36:52 SkyScan query done: ret=0 az=152.535<-10169 ze=66.495<-7567 Statuses=0009 0008 12:36:52 Msec=3750 True Az=152.535 Ze=66.495 Az status=0009 Ze status=0008 12:36:52 Check angles 12:36:52 SkyScan query 12:36:52 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:36:52 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:36:52 Message to Master queued w/err=0: serial=221568 error=0 12:36:57 Received message from Master: op=Filter serial=221569 12:36:57 Color wheel filter change from 0 to 0 12:36:57 FLIGetFilterPos err=0 currentPosition=0 12:36:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:57 Filter is already there-color wheel unchanged 12:36:58 Received message from Master: op=Shutter serial=221570 12:36:58 Shutter LASER close 12:36:58 Received message from Camera: op=State serial=221572 12:36:58 GetSingleValue result=40 Value=cccccccc 12:36:58 SkyScan query 12:36:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:36:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:58 Parameters OK 12:36:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:58 Set A/D data flow result=40 12:36:58 Set A/D channel type result=40 12:36:58 Set A/D encoding result=40 12:36:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:58 Set channel filter=0.000000e+000 result=40 12:36:58 Config A/D Result=40 12:36:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:58 Get A/D filter: -9.255963e+061 result=40 12:36:58 Get A/D value=-858993460 result=40 12:36:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:58 Parameters OK 12:36:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:58 Set A/D data flow result=40 12:36:58 Set A/D channel type result=40 12:36:58 Set A/D encoding result=40 12:36:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:58 Set channel filter=0.000000e+000 result=40 12:36:58 Config A/D Result=40 12:36:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:58 Get A/D filter: -9.255963e+061 result=40 12:36:58 Get A/D value=-858993460 result=40 12:36:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:58 Aux= 12:36:58 Message to Camera, serial 221572 queued 12:37:35 Received message from Master: op=PointingHead serial=221585 12:37:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:37:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:37:35 Point started: ret=0 12:37:35 point_skyscan result=0 12:37:36 Check angles 12:37:36 SkyScan query 12:37:37 SkyScan query done: ret=0 az=135.045<-9003 ze=36.78<-9548 Statuses=0009 0009 12:37:37 Msec=0 True Az=135.045 Ze=36.78 Az status=0009 Ze status=0009 12:37:37 Check angles 12:37:37 SkyScan query 12:37:37 SkyScan query done: ret=0 az=117.51<-7834 ze=15.825<-10945 Statuses=0009 0009 12:37:37 Msec=750 True Az=117.51 Ze=15.825 Az status=0009 Ze status=0009 12:37:38 Check angles 12:37:38 SkyScan query 12:37:38 SkyScan query done: ret=0 az=99.705<-6647 ze=-5.535<-12369 Statuses=0009 0009 12:37:38 Msec=1500 True Az=99.705 Ze=-5.535 Az status=0009 Ze status=0009 12:37:38 Check angles 12:37:38 SkyScan query 12:37:39 SkyScan query done: ret=0 az=81.945<-5463 ze=-26.955<-13797 Statuses=0009 0009 12:37:39 Msec=2250 True Az=81.945 Ze=-26.955 Az status=0009 Ze status=0009 12:37:39 Check angles 12:37:39 SkyScan query 12:37:40 SkyScan query done: ret=0 az=63.96<-4264 ze=-38.58<-14572 Statuses=0009 0008 12:37:40 Msec=3000 True Az=63.96 Ze=-38.58 Az status=0009 Ze status=0008 12:37:40 Check angles 12:37:40 SkyScan query 12:37:40 SkyScan query done: ret=0 az=46.77<-3118 ze=-38.52<-14568 Statuses=0009 0008 12:37:40 Msec=3750 True Az=46.77 Ze=-38.52 Az status=0009 Ze status=0008 12:37:41 Check angles 12:37:41 SkyScan query 12:37:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:37:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:37:41 Message to Master queued w/err=0: serial=221585 error=0 12:37:46 Received message from Master: op=Filter serial=221586 12:37:46 Color wheel filter change from 0 to 0 12:37:46 FLIGetFilterPos err=0 currentPosition=0 12:37:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:46 Filter is already there-color wheel unchanged 12:37:46 Received message from Master: op=Shutter serial=221587 12:37:46 Shutter LASER close 12:37:46 Received message from Camera: op=State serial=221589 12:37:46 GetSingleValue result=40 Value=cccccccc 12:37:46 SkyScan query 12:37:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:37:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:47 Parameters OK 12:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:47 Set A/D data flow result=40 12:37:47 Set A/D channel type result=40 12:37:47 Set A/D encoding result=40 12:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:47 Set channel filter=0.000000e+000 result=40 12:37:47 Config A/D Result=40 12:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:47 Get A/D filter: -9.255963e+061 result=40 12:37:47 Get A/D value=-858993460 result=40 12:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:47 Parameters OK 12:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:47 Set A/D data flow result=40 12:37:47 Set A/D channel type result=40 12:37:47 Set A/D encoding result=40 12:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:47 Set channel filter=0.000000e+000 result=40 12:37:47 Config A/D Result=40 12:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:47 Get A/D filter: -9.255963e+061 result=40 12:37:47 Get A/D value=-858993460 result=40 12:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:47 Aux= 12:37:47 Message to Camera, serial 221589 queued 12:38:24 Received message from Master: op=PointingHead serial=221602 12:38:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:38:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:38:24 Point started: ret=0 12:38:24 point_skyscan result=0 12:38:25 Check angles 12:38:25 SkyScan query 12:38:26 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.22<-16548 Statuses=0009 0009 12:38:26 Msec=0 True Az=63.96 Ze=-68.22 Az status=0009 Ze status=0009 12:38:26 Check angles 12:38:26 SkyScan query 12:38:26 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.67<-17978 Statuses=0009 0009 12:38:26 Msec=750 True Az=81.66 Ze=-89.67 Az status=0009 Ze status=0009 12:38:27 Check angles 12:38:27 SkyScan query 12:38:27 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.625<-19375 Statuses=0009 0009 12:38:27 Msec=1500 True Az=99.435 Ze=-110.625 Az status=0009 Ze status=0009 12:38:27 Check angles 12:38:27 SkyScan query 12:38:28 SkyScan query done: ret=0 az=116.835<-7789 ze=-131.52<-20768 Statuses=0009 0009 12:38:28 Msec=2250 True Az=116.835 Ze=-131.52 Az status=0009 Ze status=0009 12:38:28 Check angles 12:38:28 SkyScan query 12:38:29 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 12:38:29 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 12:38:29 Check angles 12:38:29 SkyScan query 12:38:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:38:29 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:38:29 Message to Master queued w/err=0: serial=221602 error=0 12:38:34 Received message from Master: op=Filter serial=221603 12:38:34 Color wheel filter change from 0 to 0 12:38:34 FLIGetFilterPos err=0 currentPosition=0 12:38:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:34 Filter is already there-color wheel unchanged 12:38:35 Received message from Master: op=Shutter serial=221604 12:38:35 Shutter LASER close 12:38:35 Received message from Camera: op=State serial=221606 12:38:35 GetSingleValue result=40 Value=cccccccc 12:38:35 SkyScan query 12:38:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:38:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:35 Parameters OK 12:38:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:35 Set A/D data flow result=40 12:38:35 Set A/D channel type result=40 12:38:35 Set A/D encoding result=40 12:38:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:35 Set channel filter=0.000000e+000 result=40 12:38:35 Config A/D Result=40 12:38:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:35 Get A/D filter: -9.255963e+061 result=40 12:38:35 Get A/D value=-858993460 result=40 12:38:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:35 Parameters OK 12:38:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:35 Set A/D data flow result=40 12:38:35 Set A/D channel type result=40 12:38:35 Set A/D encoding result=40 12:38:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:35 Set channel filter=0.000000e+000 result=40 12:38:35 Config A/D Result=40 12:38:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:35 Get A/D filter: -9.255963e+061 result=40 12:38:35 Get A/D value=-858993460 result=40 12:38:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:35 Aux= 12:38:35 Message to Camera, serial 221606 queued 12:39:12 Received message from Master: op=PointingHead serial=221619 12:39:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:39:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:39:12 Point started: ret=0 12:39:12 point_skyscan result=0 12:39:13 Check angles 12:39:13 SkyScan query 12:39:14 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 12:39:14 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 12:39:14 Check angles 12:39:14 SkyScan query 12:39:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:39:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:39:14 Message to Master queued w/err=0: serial=221619 error=0 12:39:19 Received message from Master: op=Filter serial=221620 12:39:19 Color wheel filter change from 0 to 0 12:39:19 FLIGetFilterPos err=0 currentPosition=0 12:39:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:19 Filter is already there-color wheel unchanged 12:39:20 Received message from Master: op=Shutter serial=221621 12:39:20 Shutter LASER open 12:39:20 Received message from Camera: op=State serial=221623 12:39:20 GetSingleValue result=40 Value=cccccccc 12:39:20 SkyScan query 12:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:39:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:20 Parameters OK 12:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:20 Set A/D data flow result=40 12:39:20 Set A/D channel type result=40 12:39:20 Set A/D encoding result=40 12:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:20 Set channel filter=0.000000e+000 result=40 12:39:20 Config A/D Result=40 12:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:20 Get A/D filter: -9.255963e+061 result=40 12:39:20 Get A/D value=-858993460 result=40 12:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:20 Parameters OK 12:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:20 Set A/D data flow result=40 12:39:20 Set A/D channel type result=40 12:39:20 Set A/D encoding result=40 12:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:20 Set channel filter=0.000000e+000 result=40 12:39:20 Config A/D Result=40 12:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:20 Get A/D filter: -9.255963e+061 result=40 12:39:20 Get A/D value=-858993460 result=40 12:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:20 Aux= 12:39:20 Message to Camera, serial 221623 queued 12:39:29 Received message from Master: op=Shutter serial=221633 12:39:29 Shutter LASER close 12:39:29 Received message from Master: op=PointingHead serial=221637 12:39:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:39:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:39:30 Point started: ret=0 12:39:30 point_skyscan result=0 12:39:31 Check angles 12:39:31 SkyScan query 12:39:31 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.22<-21548 Statuses=0009 0009 12:39:31 Msec=0 True Az=135.93 Ze=-143.22 Az status=0009 Ze status=0009 12:39:31 Check angles 12:39:31 SkyScan query 12:39:32 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.25<-20150 Statuses=0009 0009 12:39:32 Msec=750 True Az=153.48 Ze=-122.25 Az status=0009 Ze status=0009 12:39:32 Check angles 12:39:32 SkyScan query 12:39:33 SkyScan query done: ret=0 az=170.94<-11396 ze=-101.34<-18756 Statuses=0009 0009 12:39:33 Msec=1500 True Az=170.94 Ze=-101.34 Az status=0009 Ze status=0009 12:39:33 Check angles 12:39:33 SkyScan query 12:39:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.355<-17357 Statuses=0008 0009 12:39:33 Msec=2250 True Az=175.995 Ze=-80.355 Az status=0008 Ze status=0009 12:39:34 Check angles 12:39:34 SkyScan query 12:39:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.92<-15928 Statuses=0008 0009 12:39:34 Msec=3000 True Az=175.995 Ze=-58.92 Az status=0008 Ze status=0009 12:39:34 Check angles 12:39:34 SkyScan query 12:39:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:39:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:39:35 Message to Master queued w/err=0: serial=221637 error=0 12:39:40 Received message from Master: op=Filter serial=221638 12:39:40 Color wheel filter change from 0 to 0 12:39:40 FLIGetFilterPos err=0 currentPosition=0 12:39:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:40 Filter is already there-color wheel unchanged 12:39:40 Received message from Master: op=Shutter serial=221639 12:39:40 Shutter LASER close 12:39:40 Received message from Camera: op=State serial=221641 12:39:40 GetSingleValue result=40 Value=cccccccc 12:39:40 SkyScan query 12:39:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:39:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:41 Parameters OK 12:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:41 Set A/D data flow result=40 12:39:41 Set A/D channel type result=40 12:39:41 Set A/D encoding result=40 12:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:41 Set channel filter=0.000000e+000 result=40 12:39:41 Config A/D Result=40 12:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:41 Get A/D filter: -9.255963e+061 result=40 12:39:41 Get A/D value=-858993460 result=40 12:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:41 Parameters OK 12:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:41 Set A/D data flow result=40 12:39:41 Set A/D channel type result=40 12:39:41 Set A/D encoding result=40 12:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:41 Set channel filter=0.000000e+000 result=40 12:39:41 Config A/D Result=40 12:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:41 Get A/D filter: -9.255963e+061 result=40 12:39:41 Get A/D value=-858993460 result=40 12:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:41 Aux= 12:39:41 Message to Camera, serial 221641 queued 12:40:18 Received message from Master: op=PointingHead serial=221654 12:40:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:40:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:40:18 Point started: ret=0 12:40:18 point_skyscan result=0 12:40:19 Check angles 12:40:19 SkyScan query 12:40:19 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.78<-13452 Statuses=0009 0009 12:40:19 Msec=0 True Az=152.925 Ze=-21.78 Az status=0009 Ze status=0009 12:40:19 Check angles 12:40:19 SkyScan query 12:40:20 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.795<-12053 Statuses=0009 0009 12:40:20 Msec=750 True Az=135.435 Ze=-0.795 Az status=0009 Ze status=0009 12:40:20 Check angles 12:40:20 SkyScan query 12:40:21 SkyScan query done: ret=0 az=117.915<-7861 ze=20.13<-10658 Statuses=0009 0009 12:40:21 Msec=1500 True Az=117.915 Ze=20.13 Az status=0009 Ze status=0009 12:40:21 Check angles 12:40:21 SkyScan query 12:40:22 SkyScan query done: ret=0 az=100.665<-6711 ze=41.115<-9259 Statuses=0009 0009 12:40:22 Msec=2250 True Az=100.665 Ze=41.115 Az status=0009 Ze status=0009 12:40:22 Check angles 12:40:22 SkyScan query 12:40:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 12:40:22 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 12:40:22 Check angles 12:40:22 SkyScan query 12:40:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:40:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:40:23 Message to Master queued w/err=0: serial=221654 error=0 12:40:28 Received message from Master: op=Filter serial=221655 12:40:28 Color wheel filter change from 0 to 0 12:40:28 FLIGetFilterPos err=0 currentPosition=0 12:40:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:28 Filter is already there-color wheel unchanged 12:40:28 Received message from Master: op=Shutter serial=221656 12:40:28 Shutter LASER close 12:40:28 Received message from Camera: op=State serial=221658 12:40:28 GetSingleValue result=40 Value=cccccccc 12:40:28 SkyScan query 12:40:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:40:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:29 Parameters OK 12:40:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:29 Set A/D data flow result=40 12:40:29 Set A/D channel type result=40 12:40:29 Set A/D encoding result=40 12:40:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:29 Set channel filter=0.000000e+000 result=40 12:40:29 Config A/D Result=40 12:40:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:29 Get A/D filter: -9.255963e+061 result=40 12:40:29 Get A/D value=-858993460 result=40 12:40:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:29 Parameters OK 12:40:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:29 Set A/D data flow result=40 12:40:29 Set A/D channel type result=40 12:40:29 Set A/D encoding result=40 12:40:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:29 Set channel filter=0.000000e+000 result=40 12:40:29 Config A/D Result=40 12:40:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:29 Get A/D filter: -9.255963e+061 result=40 12:40:29 Get A/D value=-858993460 result=40 12:40:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:29 Aux= 12:40:29 Message to Camera, serial 221658 queued 12:41:06 Received message from Master: op=PointingHead serial=221671 12:41:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:41:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:41:06 Point started: ret=0 12:41:06 point_skyscan result=0 12:41:07 Check angles 12:41:07 SkyScan query 12:41:07 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 12:41:07 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 12:41:07 Check angles 12:41:07 SkyScan query 12:41:08 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 12:41:08 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 12:41:08 Check angles 12:41:08 SkyScan query 12:41:09 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 12:41:09 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 12:41:09 Check angles 12:41:09 SkyScan query 12:41:10 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 12:41:10 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 12:41:10 Check angles 12:41:10 SkyScan query 12:41:10 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:41:10 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:41:11 Check angles 12:41:11 SkyScan query 12:41:11 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:41:11 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:41:11 Message to Master queued w/err=0: serial=221671 error=0 12:41:16 Received message from Master: op=Filter serial=221672 12:41:16 Color wheel filter change from 0 to 0 12:41:16 FLIGetFilterPos err=0 currentPosition=0 12:41:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:16 Filter is already there-color wheel unchanged 12:41:16 Received message from Master: op=Shutter serial=221673 12:41:16 Shutter LASER close 12:41:16 Received message from Camera: op=State serial=221675 12:41:16 GetSingleValue result=40 Value=cccccccc 12:41:16 SkyScan query 12:41:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:41:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:17 Parameters OK 12:41:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:17 Set A/D data flow result=40 12:41:17 Set A/D channel type result=40 12:41:17 Set A/D encoding result=40 12:41:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:17 Set channel filter=0.000000e+000 result=40 12:41:17 Config A/D Result=40 12:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:17 Get A/D filter: -9.255963e+061 result=40 12:41:17 Get A/D value=-858993460 result=40 12:41:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:17 Parameters OK 12:41:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:17 Set A/D data flow result=40 12:41:17 Set A/D channel type result=40 12:41:17 Set A/D encoding result=40 12:41:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:17 Set channel filter=0.000000e+000 result=40 12:41:17 Config A/D Result=40 12:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:17 Get A/D filter: -9.255963e+061 result=40 12:41:17 Get A/D value=-858993460 result=40 12:41:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:17 Aux= 12:41:17 Message to Camera, serial 221675 queued 12:41:54 Received message from Master: op=PointingHead serial=221688 12:41:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:41:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:41:54 Point started: ret=0 12:41:54 point_skyscan result=0 12:41:55 Check angles 12:41:55 SkyScan query 12:41:55 SkyScan query done: ret=0 az=152.67<-10178 ze=8.325<-11445 Statuses=0009 0009 12:41:55 Msec=0 True Az=152.67 Ze=8.325 Az status=0009 Ze status=0009 12:41:56 Check angles 12:41:56 SkyScan query 12:41:56 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.585<-12839 Statuses=0009 0009 12:41:56 Msec=750 True Az=135.165 Ze=-12.585 Az status=0009 Ze status=0009 12:41:56 Check angles 12:41:56 SkyScan query 12:41:57 SkyScan query done: ret=0 az=117.315<-7821 ze=-34.065<-14271 Statuses=0009 0009 12:41:57 Msec=1500 True Az=117.315 Ze=-34.065 Az status=0009 Ze status=0009 12:41:57 Check angles 12:41:57 SkyScan query 12:41:58 SkyScan query done: ret=0 az=99.885<-6659 ze=-51.555<-15437 Statuses=0009 0009 12:41:58 Msec=2250 True Az=99.885 Ze=-51.555 Az status=0009 Ze status=0009 12:41:58 Check angles 12:41:58 SkyScan query 12:41:58 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 12:41:58 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 12:41:59 Check angles 12:41:59 SkyScan query 12:41:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:41:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:41:59 Message to Master queued w/err=0: serial=221688 error=0 12:42:04 Received message from Master: op=Filter serial=221689 12:42:04 Color wheel filter change from 0 to 0 12:42:04 FLIGetFilterPos err=0 currentPosition=0 12:42:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:04 Filter is already there-color wheel unchanged 12:42:04 Received message from Master: op=Shutter serial=221690 12:42:04 Shutter LASER close 12:42:04 Received message from Camera: op=State serial=221692 12:42:04 GetSingleValue result=40 Value=cccccccc 12:42:04 SkyScan query 12:42:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:42:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:05 Parameters OK 12:42:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:05 Set A/D data flow result=40 12:42:05 Set A/D channel type result=40 12:42:05 Set A/D encoding result=40 12:42:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:05 Set channel filter=0.000000e+000 result=40 12:42:05 Config A/D Result=40 12:42:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:05 Get A/D filter: -9.255963e+061 result=40 12:42:05 Get A/D value=-858993460 result=40 12:42:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:05 Parameters OK 12:42:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:05 Set A/D data flow result=40 12:42:05 Set A/D channel type result=40 12:42:05 Set A/D encoding result=40 12:42:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:05 Set channel filter=0.000000e+000 result=40 12:42:05 Config A/D Result=40 12:42:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:05 Get A/D filter: -9.255963e+061 result=40 12:42:05 Get A/D value=-858993460 result=40 12:42:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:05 Aux= 12:42:05 Message to Camera, serial 221692 queued 12:42:42 Received message from Master: op=PointingHead serial=221705 12:42:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:42:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:42:42 Point started: ret=0 12:42:42 point_skyscan result=0 12:42:43 Check angles 12:42:43 SkyScan query 12:42:43 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.3<-17420 Statuses=0009 0009 12:42:43 Msec=0 True Az=108.99 Ze=-81.3 Az status=0009 Ze status=0009 12:42:44 Check angles 12:42:44 SkyScan query 12:42:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.24<-18816 Statuses=0008 0009 12:42:44 Msec=750 True Az=112.995 Ze=-102.24 Az status=0008 Ze status=0009 12:42:44 Check angles 12:42:44 SkyScan query 12:42:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 12:42:45 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 12:42:45 Check angles 12:42:45 SkyScan query 12:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.57<-21638 Statuses=0008 0009 12:42:46 Msec=2250 True Az=112.995 Ze=-144.57 Az status=0008 Ze status=0009 12:42:46 Check angles 12:42:46 SkyScan query 12:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 12:42:46 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 12:42:47 Check angles 12:42:47 SkyScan query 12:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:42:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:42:47 Message to Master queued w/err=0: serial=221705 error=0 12:42:52 Received message from Master: op=Filter serial=221706 12:42:52 Color wheel filter change from 0 to 0 12:42:52 FLIGetFilterPos err=0 currentPosition=0 12:42:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:52 Filter is already there-color wheel unchanged 12:42:52 Received message from Master: op=Shutter serial=221707 12:42:52 Shutter LASER open 12:42:53 Received message from Camera: op=State serial=221709 12:42:53 GetSingleValue result=40 Value=cccccccc 12:42:53 SkyScan query 12:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:42:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:53 Parameters OK 12:42:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:53 Set A/D data flow result=40 12:42:53 Set A/D channel type result=40 12:42:53 Set A/D encoding result=40 12:42:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:53 Set channel filter=0.000000e+000 result=40 12:42:53 Config A/D Result=40 12:42:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:53 Get A/D filter: -9.255963e+061 result=40 12:42:53 Get A/D value=-858993460 result=40 12:42:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:53 Parameters OK 12:42:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:53 Set A/D data flow result=40 12:42:53 Set A/D channel type result=40 12:42:53 Set A/D encoding result=40 12:42:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:53 Set channel filter=0.000000e+000 result=40 12:42:53 Config A/D Result=40 12:42:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:53 Get A/D filter: -9.255963e+061 result=40 12:42:53 Get A/D value=-858993460 result=40 12:42:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:53 Aux= 12:42:53 Message to Camera, serial 221709 queued 12:43:01 Received message from Master: op=Shutter serial=221718 12:43:01 Shutter LASER close 12:43:01 Received message from Master: op=PointingHead serial=221722 12:43:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:43:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:43:01 Point started: ret=0 12:43:01 point_skyscan result=0 12:43:02 Check angles 12:43:02 SkyScan query 12:43:03 SkyScan query done: ret=0 az=89.625<-5975 ze=157.005<-1533 Statuses=0009 0009 12:43:03 Msec=0 True Az=89.625 Ze=157.005 Az status=0009 Ze status=0009 12:43:03 Check angles 12:43:03 SkyScan query 12:43:04 SkyScan query done: ret=0 az=71.76<-4784 ze=135.615<-2959 Statuses=0009 0009 12:43:04 Msec=750 True Az=71.76 Ze=135.615 Az status=0009 Ze status=0009 12:43:04 Check angles 12:43:04 SkyScan query 12:43:04 SkyScan query done: ret=0 az=54.39<-3626 ze=114.645<-4357 Statuses=0009 0009 12:43:04 Msec=1500 True Az=54.39 Ze=114.645 Az status=0009 Ze status=0009 12:43:04 Check angles 12:43:04 SkyScan query 12:43:05 SkyScan query done: ret=0 az=41.01<-2734 ze=93.315<-5779 Statuses=0009 0009 12:43:05 Msec=2250 True Az=41.01 Ze=93.315 Az status=0009 Ze status=0009 12:43:05 Check angles 12:43:05 SkyScan query 12:43:06 SkyScan query done: ret=0 az=40.995<-2733 ze=71.895<-7207 Statuses=0008 0009 12:43:06 Msec=3000 True Az=40.995 Ze=71.895 Az status=0008 Ze status=0009 12:43:06 Check angles 12:43:06 SkyScan query 12:43:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.885<-8541 Statuses=0008 0009 12:43:07 Msec=3750 True Az=40.995 Ze=51.885 Az status=0008 Ze status=0009 12:43:07 Check angles 12:43:07 SkyScan query 12:43:07 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 12:43:07 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 12:43:07 Message to Master queued w/err=0: serial=221722 error=0 12:43:12 Received message from Master: op=Filter serial=221723 12:43:12 Color wheel filter change from 0 to 0 12:43:12 FLIGetFilterPos err=0 currentPosition=0 12:43:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:12 Filter is already there-color wheel unchanged 12:43:13 Received message from Master: op=Shutter serial=221724 12:43:13 Shutter LASER close 12:43:13 Received message from Camera: op=State serial=221726 12:43:13 GetSingleValue result=40 Value=cccccccc 12:43:13 SkyScan query 12:43:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:43:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:13 Parameters OK 12:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:13 Set A/D data flow result=40 12:43:13 Set A/D channel type result=40 12:43:13 Set A/D encoding result=40 12:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:13 Set channel filter=0.000000e+000 result=40 12:43:13 Config A/D Result=40 12:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:13 Get A/D filter: -9.255963e+061 result=40 12:43:13 Get A/D value=-858993460 result=40 12:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:13 Parameters OK 12:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:13 Set A/D data flow result=40 12:43:13 Set A/D channel type result=40 12:43:13 Set A/D encoding result=40 12:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:13 Set channel filter=0.000000e+000 result=40 12:43:13 Config A/D Result=40 12:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:13 Get A/D filter: -9.255963e+061 result=40 12:43:13 Get A/D value=-858993460 result=40 12:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:13 Aux= 12:43:13 Message to Camera, serial 221726 queued 12:43:50 Received message from Master: op=PointingHead serial=221739 12:43:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:43:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:43:50 Point started: ret=0 12:43:50 point_skyscan result=0 12:43:51 Check angles 12:43:51 SkyScan query 12:43:52 SkyScan query done: ret=0 az=63.96<-4264 ze=66.54<-7564 Statuses=0009 0008 12:43:52 Msec=0 True Az=63.96 Ze=66.54 Az status=0009 Ze status=0008 12:43:52 Check angles 12:43:52 SkyScan query 12:43:53 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 12:43:53 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 12:43:53 Check angles 12:43:53 SkyScan query 12:43:53 SkyScan query done: ret=0 az=98.805<-6587 ze=66.495<-7567 Statuses=0009 0008 12:43:53 Msec=1500 True Az=98.805 Ze=66.495 Az status=0009 Ze status=0008 12:43:53 Check angles 12:43:53 SkyScan query 12:43:54 SkyScan query done: ret=0 az=116.22<-7748 ze=66.495<-7567 Statuses=0009 0008 12:43:54 Msec=2250 True Az=116.22 Ze=66.495 Az status=0009 Ze status=0008 12:43:54 Check angles 12:43:54 SkyScan query 12:43:55 SkyScan query done: ret=0 az=133.725<-8915 ze=66.495<-7567 Statuses=0009 0008 12:43:55 Msec=3000 True Az=133.725 Ze=66.495 Az status=0009 Ze status=0008 12:43:55 Check angles 12:43:55 SkyScan query 12:43:56 SkyScan query done: ret=0 az=151.065<-10071 ze=66.495<-7567 Statuses=0009 0008 12:43:56 Msec=3750 True Az=151.065 Ze=66.495 Az status=0009 Ze status=0008 12:43:56 Check angles 12:43:56 SkyScan query 12:43:56 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:43:56 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:43:56 Message to Master queued w/err=0: serial=221739 error=0 12:44:01 Received message from Master: op=Filter serial=221740 12:44:01 Color wheel filter change from 0 to 0 12:44:01 FLIGetFilterPos err=0 currentPosition=0 12:44:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:01 Filter is already there-color wheel unchanged 12:44:01 Received message from Master: op=Shutter serial=221741 12:44:01 Shutter LASER close 12:44:01 Received message from Camera: op=State serial=221743 12:44:01 GetSingleValue result=40 Value=cccccccc 12:44:01 SkyScan query 12:44:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:44:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:02 Parameters OK 12:44:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:02 Set A/D data flow result=40 12:44:02 Set A/D channel type result=40 12:44:02 Set A/D encoding result=40 12:44:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:02 Set channel filter=0.000000e+000 result=40 12:44:02 Config A/D Result=40 12:44:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:02 Get A/D filter: -9.255963e+061 result=40 12:44:02 Get A/D value=-858993460 result=40 12:44:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:02 Parameters OK 12:44:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:02 Set A/D data flow result=40 12:44:02 Set A/D channel type result=40 12:44:02 Set A/D encoding result=40 12:44:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:02 Set channel filter=0.000000e+000 result=40 12:44:02 Config A/D Result=40 12:44:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:02 Get A/D filter: -9.255963e+061 result=40 12:44:02 Get A/D value=-858993460 result=40 12:44:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:02 Aux= 12:44:02 Message to Camera, serial 221743 queued 12:44:39 Received message from Master: op=PointingHead serial=221756 12:44:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:44:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:44:39 Point started: ret=0 12:44:39 point_skyscan result=0 12:44:40 Check angles 12:44:40 SkyScan query 12:44:41 SkyScan query done: ret=0 az=134.82<-8988 ze=36.72<-9552 Statuses=0009 0009 12:44:41 Msec=0 True Az=134.82 Ze=36.72 Az status=0009 Ze status=0009 12:44:41 Check angles 12:44:41 SkyScan query 12:44:41 SkyScan query done: ret=0 az=117.015<-7801 ze=15.345<-10977 Statuses=0009 0009 12:44:41 Msec=750 True Az=117.015 Ze=15.345 Az status=0009 Ze status=0009 12:44:42 Check angles 12:44:42 SkyScan query 12:44:42 SkyScan query done: ret=0 az=99.18<-6612 ze=-6.09<-12406 Statuses=0009 0009 12:44:42 Msec=1500 True Az=99.18 Ze=-6.09 Az status=0009 Ze status=0009 12:44:42 Check angles 12:44:42 SkyScan query 12:44:43 SkyScan query done: ret=0 az=81.495<-5433 ze=-27.54<-13836 Statuses=0009 0009 12:44:43 Msec=2250 True Az=81.495 Ze=-27.54 Az status=0009 Ze status=0009 12:44:43 Check angles 12:44:43 SkyScan query 12:44:44 SkyScan query done: ret=0 az=63.735<-4249 ze=-38.565<-14571 Statuses=0009 0008 12:44:44 Msec=3000 True Az=63.735 Ze=-38.565 Az status=0009 Ze status=0008 12:44:44 Check angles 12:44:44 SkyScan query 12:44:44 SkyScan query done: ret=0 az=46.665<-3111 ze=-38.52<-14568 Statuses=0009 0008 12:44:44 Msec=3750 True Az=46.665 Ze=-38.52 Az status=0009 Ze status=0008 12:44:45 Check angles 12:44:45 SkyScan query 12:44:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:44:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:44:45 Message to Master queued w/err=0: serial=221756 error=0 12:44:50 Received message from Master: op=Filter serial=221757 12:44:50 Color wheel filter change from 0 to 0 12:44:50 FLIGetFilterPos err=0 currentPosition=0 12:44:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:50 Filter is already there-color wheel unchanged 12:44:50 Received message from Master: op=Shutter serial=221758 12:44:50 Shutter LASER close 12:44:50 Received message from Camera: op=State serial=221760 12:44:50 GetSingleValue result=40 Value=cccccccc 12:44:50 SkyScan query 12:44:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:44:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:51 Parameters OK 12:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:51 Set A/D data flow result=40 12:44:51 Set A/D channel type result=40 12:44:51 Set A/D encoding result=40 12:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:51 Set channel filter=0.000000e+000 result=40 12:44:51 Config A/D Result=40 12:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:51 Get A/D filter: -9.255963e+061 result=40 12:44:51 Get A/D value=-858993460 result=40 12:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:51 Parameters OK 12:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:51 Set A/D data flow result=40 12:44:51 Set A/D channel type result=40 12:44:51 Set A/D encoding result=40 12:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:51 Set channel filter=0.000000e+000 result=40 12:44:51 Config A/D Result=40 12:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:51 Get A/D filter: -9.255963e+061 result=40 12:44:51 Get A/D value=-858993460 result=40 12:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:51 Aux= 12:44:51 Message to Camera, serial 221760 queued 12:45:27 Received message from Master: op=Identify serial=221769 12:45:28 Received message from Master: op=PointingHead serial=221776 12:45:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:45:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:45:28 Point started: ret=0 12:45:28 point_skyscan result=0 12:45:29 Check angles 12:45:29 SkyScan query 12:45:29 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.7<-16580 Statuses=0009 0009 12:45:29 Msec=0 True Az=64.29 Ze=-68.7 Az status=0009 Ze status=0009 12:45:30 Check angles 12:45:30 SkyScan query 12:45:30 SkyScan query done: ret=0 az=82.08<-5472 ze=-90.045<-18003 Statuses=0009 0009 12:45:30 Msec=750 True Az=82.08 Ze=-90.045 Az status=0009 Ze status=0009 12:45:30 Check angles 12:45:30 SkyScan query 12:45:31 SkyScan query done: ret=0 az=99.795<-6653 ze=-111<-19400 Statuses=0009 0009 12:45:31 Msec=1500 True Az=99.795 Ze=-111 Az status=0009 Ze status=0009 12:45:31 Check angles 12:45:31 SkyScan query 12:45:32 SkyScan query done: ret=0 az=117.135<-7809 ze=-131.94<-20796 Statuses=0009 0009 12:45:32 Msec=2250 True Az=117.135 Ze=-131.94 Az status=0009 Ze status=0009 12:45:32 Check angles 12:45:32 SkyScan query 12:45:32 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 12:45:32 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 12:45:33 Check angles 12:45:33 SkyScan query 12:45:33 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:45:33 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:45:33 Message to Master queued w/err=0: serial=221776 error=0 12:45:38 Received message from Master: op=Filter serial=221777 12:45:38 Color wheel filter change from 0 to 0 12:45:38 FLIGetFilterPos err=0 currentPosition=0 12:45:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:38 Filter is already there-color wheel unchanged 12:45:38 Received message from Master: op=Shutter serial=221778 12:45:38 Shutter LASER close 12:45:38 Received message from Camera: op=State serial=221780 12:45:38 GetSingleValue result=40 Value=cccccccc 12:45:38 SkyScan query 12:45:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:45:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:39 Parameters OK 12:45:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:39 Set A/D data flow result=40 12:45:39 Set A/D channel type result=40 12:45:39 Set A/D encoding result=40 12:45:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:39 Set channel filter=0.000000e+000 result=40 12:45:39 Config A/D Result=40 12:45:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:39 Get A/D filter: -9.255963e+061 result=40 12:45:39 Get A/D value=-858993460 result=40 12:45:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:39 Parameters OK 12:45:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:39 Set A/D data flow result=40 12:45:39 Set A/D channel type result=40 12:45:39 Set A/D encoding result=40 12:45:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-17 12:45:39] 12:45:39 Set channel filter=0.000000e+000 result=40 12:45:39 Config A/D Result=40 12:45:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:39 Get A/D filter: -9.255963e+061 result=40 12:45:39 Get A/D value=-858993460 result=40 12:45:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:39 Aux= 12:45:39 Message to Camera, serial 221780 queued 12:46:16 Received message from Master: op=PointingHead serial=221793 12:46:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:46:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:46:16 Point started: ret=0 12:46:16 point_skyscan result=0 12:46:17 Check angles 12:46:17 SkyScan query 12:46:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0009 0009 12:46:17 Msec=0 True Az=112.995 Ze=-171.03 Az status=0009 Ze status=0009 12:46:18 Check angles 12:46:18 SkyScan query 12:46:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:46:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:46:18 Message to Master queued w/err=0: serial=221793 error=0 12:46:23 Received message from Master: op=Filter serial=221794 12:46:23 Color wheel filter change from 0 to 0 12:46:23 FLIGetFilterPos err=0 currentPosition=0 12:46:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:23 Filter is already there-color wheel unchanged 12:46:23 Received message from Master: op=Shutter serial=221795 12:46:23 Shutter LASER open 12:46:24 Received message from Camera: op=State serial=221797 12:46:24 GetSingleValue result=40 Value=cccccccc 12:46:24 SkyScan query 12:46:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:46:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:24 Parameters OK 12:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:24 Set A/D data flow result=40 12:46:24 Set A/D channel type result=40 12:46:24 Set A/D encoding result=40 12:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:24 Set channel filter=0.000000e+000 result=40 12:46:24 Config A/D Result=40 12:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:24 Get A/D filter: -9.255963e+061 result=40 12:46:24 Get A/D value=-858993460 result=40 12:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:24 Parameters OK 12:46:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:24 Set A/D data flow result=40 12:46:24 Set A/D channel type result=40 12:46:24 Set A/D encoding result=40 12:46:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:24 Set channel filter=0.000000e+000 result=40 12:46:24 Config A/D Result=40 12:46:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:24 Get A/D filter: -9.255963e+061 result=40 12:46:24 Get A/D value=-858993460 result=40 12:46:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:24 Aux= 12:46:24 Message to Camera, serial 221797 queued 12:46:33 Received message from Master: op=Shutter serial=221807 12:46:33 Shutter LASER close 12:46:33 Received message from Master: op=PointingHead serial=221811 12:46:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:46:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:46:34 Point started: ret=0 12:46:34 point_skyscan result=0 12:46:34 Check angles 12:46:34 SkyScan query 12:46:35 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.49<-21566 Statuses=0009 0009 12:46:35 Msec=0 True Az=135.705 Ze=-143.49 Az status=0009 Ze status=0009 12:46:35 Check angles 12:46:35 SkyScan query 12:46:36 SkyScan query done: ret=0 az=153.315<-10221 ze=-122.52<-20168 Statuses=0009 0009 12:46:36 Msec=750 True Az=153.315 Ze=-122.52 Az status=0009 Ze status=0009 12:46:36 Check angles 12:46:36 SkyScan query 12:46:36 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.145<-18743 Statuses=0009 0009 12:46:36 Msec=1500 True Az=171.045 Ze=-101.145 Az status=0009 Ze status=0009 12:46:37 Check angles 12:46:37 SkyScan query 12:46:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.205<-17347 Statuses=0008 0009 12:46:37 Msec=2250 True Az=175.995 Ze=-80.205 Az status=0008 Ze status=0009 12:46:37 Check angles 12:46:37 SkyScan query 12:46:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.22<-15948 Statuses=0008 0009 12:46:38 Msec=3000 True Az=175.995 Ze=-59.22 Az status=0008 Ze status=0009 12:46:38 Check angles 12:46:38 SkyScan query 12:46:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:46:39 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:46:39 Message to Master queued w/err=0: serial=221811 error=0 12:46:44 Received message from Master: op=Filter serial=221812 12:46:44 Color wheel filter change from 0 to 0 12:46:44 FLIGetFilterPos err=0 currentPosition=0 12:46:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:44 Filter is already there-color wheel unchanged 12:46:44 Received message from Master: op=Shutter serial=221813 12:46:44 Shutter LASER close 12:46:44 Received message from Camera: op=State serial=221815 12:46:44 GetSingleValue result=40 Value=cccccccc 12:46:44 SkyScan query 12:46:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:46:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:45 Parameters OK 12:46:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:45 Set A/D data flow result=40 12:46:45 Set A/D channel type result=40 12:46:45 Set A/D encoding result=40 12:46:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:45 Set channel filter=0.000000e+000 result=40 12:46:45 Config A/D Result=40 12:46:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:45 Get A/D filter: -9.255963e+061 result=40 12:46:45 Get A/D value=-858993460 result=40 12:46:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:45 Parameters OK 12:46:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:45 Set A/D data flow result=40 12:46:45 Set A/D channel type result=40 12:46:45 Set A/D encoding result=40 12:46:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:45 Set channel filter=0.000000e+000 result=40 12:46:45 Config A/D Result=40 12:46:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:45 Get A/D filter: -9.255963e+061 result=40 12:46:45 Get A/D value=-858993460 result=40 12:46:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:45 Aux= 12:46:45 Message to Camera, serial 221815 queued 12:47:21 Received message from Master: op=PointingHead serial=221828 12:47:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:47:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:47:22 Point started: ret=0 12:47:22 point_skyscan result=0 12:47:23 Check angles 12:47:23 SkyScan query 12:47:23 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.135<-13409 Statuses=0009 0009 12:47:23 Msec=0 True Az=152.565 Ze=-21.135 Az status=0009 Ze status=0009 12:47:23 Check angles 12:47:23 SkyScan query 12:47:24 SkyScan query done: ret=0 az=134.625<-8975 ze=0.21<-11986 Statuses=0009 0009 12:47:24 Msec=750 True Az=134.625 Ze=0.21 Az status=0009 Ze status=0009 12:47:24 Check angles 12:47:24 SkyScan query 12:47:25 SkyScan query done: ret=0 az=117.135<-7809 ze=21.21<-10586 Statuses=0009 0009 12:47:25 Msec=1500 True Az=117.135 Ze=21.21 Az status=0009 Ze status=0009 12:47:25 Check angles 12:47:25 SkyScan query 12:47:25 SkyScan query done: ret=0 az=99.675<-6645 ze=42.135<-9191 Statuses=0009 0009 12:47:25 Msec=2250 True Az=99.675 Ze=42.135 Az status=0009 Ze status=0009 12:47:26 Check angles 12:47:26 SkyScan query 12:47:26 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 12:47:26 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 12:47:26 Check angles 12:47:26 SkyScan query 12:47:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:47:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:47:27 Message to Master queued w/err=0: serial=221828 error=0 12:47:32 Received message from Master: op=Filter serial=221829 12:47:32 Color wheel filter change from 0 to 0 12:47:32 FLIGetFilterPos err=0 currentPosition=0 12:47:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:32 Filter is already there-color wheel unchanged 12:47:32 Received message from Master: op=Shutter serial=221830 12:47:32 Shutter LASER close 12:47:32 Received message from Camera: op=State serial=221832 12:47:32 GetSingleValue result=40 Value=cccccccc 12:47:32 SkyScan query 12:47:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:47:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:33 Parameters OK 12:47:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:33 Set A/D data flow result=40 12:47:33 Set A/D channel type result=40 12:47:33 Set A/D encoding result=40 12:47:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:33 Set channel filter=0.000000e+000 result=40 12:47:33 Config A/D Result=40 12:47:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:33 Get A/D filter: -9.255963e+061 result=40 12:47:33 Get A/D value=-858993460 result=40 12:47:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:33 Parameters OK 12:47:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:33 Set A/D data flow result=40 12:47:33 Set A/D channel type result=40 12:47:33 Set A/D encoding result=40 12:47:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:33 Set channel filter=0.000000e+000 result=40 12:47:33 Config A/D Result=40 12:47:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:33 Get A/D filter: -9.255963e+061 result=40 12:47:33 Get A/D value=-858993460 result=40 12:47:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:33 Aux= 12:47:33 Message to Camera, serial 221832 queued 12:48:10 Received message from Master: op=PointingHead serial=221845 12:48:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:48:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:48:10 Point started: ret=0 12:48:10 point_skyscan result=0 12:48:11 Check angles 12:48:11 SkyScan query 12:48:11 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 12:48:11 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 12:48:11 Check angles 12:48:11 SkyScan query 12:48:12 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 12:48:12 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 12:48:12 Check angles 12:48:12 SkyScan query 12:48:13 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 12:48:13 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 12:48:13 Check angles 12:48:13 SkyScan query 12:48:14 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 12:48:14 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 12:48:14 Check angles 12:48:14 SkyScan query 12:48:14 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:48:14 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:48:14 Check angles 12:48:14 SkyScan query 12:48:15 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:48:15 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:48:15 Message to Master queued w/err=0: serial=221845 error=0 12:48:20 Received message from Master: op=Filter serial=221846 12:48:20 Color wheel filter change from 0 to 0 12:48:20 FLIGetFilterPos err=0 currentPosition=0 12:48:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:20 Filter is already there-color wheel unchanged 12:48:20 Received message from Master: op=Shutter serial=221847 12:48:20 Shutter LASER close 12:48:20 Received message from Camera: op=State serial=221849 12:48:20 GetSingleValue result=40 Value=cccccccc 12:48:20 SkyScan query 12:48:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:48:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:21 Parameters OK 12:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:21 Set A/D data flow result=40 12:48:21 Set A/D channel type result=40 12:48:21 Set A/D encoding result=40 12:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:21 Set channel filter=0.000000e+000 result=40 12:48:21 Config A/D Result=40 12:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:21 Get A/D filter: -9.255963e+061 result=40 12:48:21 Get A/D value=-858993460 result=40 12:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:21 Parameters OK 12:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:21 Set A/D data flow result=40 12:48:21 Set A/D channel type result=40 12:48:21 Set A/D encoding result=40 12:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:21 Set channel filter=0.000000e+000 result=40 12:48:21 Config A/D Result=40 12:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:21 Get A/D filter: -9.255963e+061 result=40 12:48:21 Get A/D value=-858993460 result=40 12:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:21 Aux= 12:48:21 Message to Camera, serial 221849 queued 12:48:58 Received message from Master: op=PointingHead serial=221862 12:48:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:48:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:48:58 Point started: ret=0 12:48:58 point_skyscan result=0 12:48:59 Check angles 12:48:59 SkyScan query 12:48:59 SkyScan query done: ret=0 az=152.76<-10184 ze=8.385<-11441 Statuses=0009 0009 12:48:59 Msec=0 True Az=152.76 Ze=8.385 Az status=0009 Ze status=0009 12:49:00 Check angles 12:49:00 SkyScan query 12:49:00 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.48<-12832 Statuses=0009 0009 12:49:00 Msec=750 True Az=135.33 Ze=-12.48 Az status=0009 Ze status=0009 12:49:00 Check angles 12:49:00 SkyScan query 12:49:01 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.495<-14233 Statuses=0009 0009 12:49:01 Msec=1500 True Az=117.78 Ze=-33.495 Az status=0009 Ze status=0009 12:49:01 Check angles 12:49:01 SkyScan query 12:49:02 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.555<-15437 Statuses=0009 0009 12:49:02 Msec=2250 True Az=100.425 Ze=-51.555 Az status=0009 Ze status=0009 12:49:02 Check angles 12:49:02 SkyScan query 12:49:02 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:49:02 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:49:03 Check angles 12:49:03 SkyScan query 12:49:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:49:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:49:03 Message to Master queued w/err=0: serial=221862 error=0 12:49:08 Received message from Master: op=Filter serial=221863 12:49:08 Color wheel filter change from 0 to 0 12:49:08 FLIGetFilterPos err=0 currentPosition=0 12:49:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:08 Filter is already there-color wheel unchanged 12:49:08 Received message from Master: op=Shutter serial=221864 12:49:08 Shutter LASER close 12:49:08 Received message from Camera: op=State serial=221866 12:49:08 GetSingleValue result=40 Value=cccccccc 12:49:08 SkyScan query 12:49:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:49:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:09 Parameters OK 12:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:09 Set A/D data flow result=40 12:49:09 Set A/D channel type result=40 12:49:09 Set A/D encoding result=40 12:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:09 Set channel filter=0.000000e+000 result=40 12:49:09 Config A/D Result=40 12:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:09 Get A/D filter: -9.255963e+061 result=40 12:49:09 Get A/D value=-858993460 result=40 12:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:09 Parameters OK 12:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:09 Set A/D data flow result=40 12:49:09 Set A/D channel type result=40 12:49:09 Set A/D encoding result=40 12:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:09 Set channel filter=0.000000e+000 result=40 12:49:09 Config A/D Result=40 12:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:09 Get A/D filter: -9.255963e+061 result=40 12:49:09 Get A/D value=-858993460 result=40 12:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:09 Aux= 12:49:09 Message to Camera, serial 221866 queued 12:49:46 Received message from Master: op=PointingHead serial=221879 12:49:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:49:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:49:46 Point started: ret=0 12:49:46 point_skyscan result=0 12:49:47 Check angles 12:49:47 SkyScan query 12:49:47 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.375<-17425 Statuses=0009 0009 12:49:47 Msec=0 True Az=109.14 Ze=-81.375 Az status=0009 Ze status=0009 12:49:48 Check angles 12:49:48 SkyScan query 12:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 12:49:48 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 12:49:48 Check angles 12:49:48 SkyScan query 12:49:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.155<-20277 Statuses=0008 0009 12:49:49 Msec=1500 True Az=112.995 Ze=-124.155 Az status=0008 Ze status=0009 12:49:49 Check angles 12:49:49 SkyScan query 12:49:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.095<-21673 Statuses=0008 0009 12:49:50 Msec=2250 True Az=112.995 Ze=-145.095 Az status=0008 Ze status=0009 12:49:50 Check angles 12:49:50 SkyScan query 12:49:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.5<-23100 Statuses=0008 0009 12:49:50 Msec=3000 True Az=112.995 Ze=-166.5 Az status=0008 Ze status=0009 12:49:51 Check angles 12:49:51 SkyScan query 12:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:49:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:49:51 Message to Master queued w/err=0: serial=221879 error=0 12:49:56 Received message from Master: op=Filter serial=221880 12:49:56 Color wheel filter change from 0 to 0 12:49:56 FLIGetFilterPos err=0 currentPosition=0 12:49:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:56 Filter is already there-color wheel unchanged 12:49:56 Received message from Master: op=Shutter serial=221881 12:49:56 Shutter LASER open 12:49:57 Received message from Camera: op=State serial=221883 12:49:57 GetSingleValue result=40 Value=cccccccc 12:49:57 SkyScan query 12:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:49:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:57 Parameters OK 12:49:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:57 Set A/D data flow result=40 12:49:57 Set A/D channel type result=40 12:49:57 Set A/D encoding result=40 12:49:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:57 Set channel filter=0.000000e+000 result=40 12:49:57 Config A/D Result=40 12:49:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:57 Get A/D filter: -9.255963e+061 result=40 12:49:57 Get A/D value=-858993460 result=40 12:49:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:57 Parameters OK 12:49:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:57 Set A/D data flow result=40 12:49:57 Set A/D channel type result=40 12:49:57 Set A/D encoding result=40 12:49:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:57 Set channel filter=0.000000e+000 result=40 12:49:57 Config A/D Result=40 12:49:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:57 Get A/D filter: -9.255963e+061 result=40 12:49:57 Get A/D value=-858993460 result=40 12:49:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:57 Aux= 12:49:57 Message to Camera, serial 221883 queued 12:50:06 Received message from Master: op=Shutter serial=221893 12:50:06 Shutter LASER close 12:50:06 Received message from Master: op=PointingHead serial=221897 12:50:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:50:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:50:06 Point started: ret=0 12:50:06 point_skyscan result=0 12:50:07 Check angles 12:50:07 SkyScan query 12:50:08 SkyScan query done: ret=0 az=90.18<-6012 ze=157.575<-1495 Statuses=0009 0009 12:50:08 Msec=0 True Az=90.18 Ze=157.575 Az status=0009 Ze status=0009 12:50:08 Check angles 12:50:08 SkyScan query 12:50:08 SkyScan query done: ret=0 az=72.765<-4851 ze=136.59<-2894 Statuses=0009 0009 12:50:08 Msec=750 True Az=72.765 Ze=136.59 Az status=0009 Ze status=0009 12:50:09 Check angles 12:50:09 SkyScan query 12:50:09 SkyScan query done: ret=0 az=54.915<-3661 ze=115.23<-4318 Statuses=0009 0009 12:50:09 Msec=1500 True Az=54.915 Ze=115.23 Az status=0009 Ze status=0009 12:50:09 Check angles 12:50:09 SkyScan query 12:50:10 SkyScan query done: ret=0 az=40.995<-2733 ze=94.245<-5717 Statuses=0009 0009 12:50:10 Msec=2250 True Az=40.995 Ze=94.245 Az status=0009 Ze status=0009 12:50:10 Check angles 12:50:10 SkyScan query 12:50:11 SkyScan query done: ret=0 az=40.98<-2732 ze=72.87<-7142 Statuses=0008 0009 12:50:11 Msec=3000 True Az=40.98 Ze=72.87 Az status=0008 Ze status=0009 12:50:11 Check angles 12:50:11 SkyScan query 12:50:11 SkyScan query done: ret=0 az=40.98<-2732 ze=52.5<-8500 Statuses=0008 0009 12:50:11 Msec=3750 True Az=40.98 Ze=52.5 Az status=0008 Ze status=0009 12:50:12 Check angles 12:50:12 SkyScan query 12:50:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:50:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:50:12 Message to Master queued w/err=0: serial=221897 error=0 12:50:17 Received message from Master: op=Filter serial=221898 12:50:17 Color wheel filter change from 0 to 0 12:50:17 FLIGetFilterPos err=0 currentPosition=0 12:50:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:17 Filter is already there-color wheel unchanged 12:50:17 Received message from Master: op=Shutter serial=221899 12:50:17 Shutter LASER close 12:50:18 Received message from Camera: op=State serial=221901 12:50:18 GetSingleValue result=40 Value=cccccccc 12:50:18 SkyScan query 12:50:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:50:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:18 Parameters OK 12:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:18 Set A/D data flow result=40 12:50:18 Set A/D channel type result=40 12:50:18 Set A/D encoding result=40 12:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:18 Set channel filter=0.000000e+000 result=40 12:50:18 Config A/D Result=40 12:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:18 Get A/D filter: -9.255963e+061 result=40 12:50:18 Get A/D value=-858993460 result=40 12:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:18 Parameters OK 12:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:18 Set A/D data flow result=40 12:50:18 Set A/D channel type result=40 12:50:18 Set A/D encoding result=40 12:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:18 Set channel filter=0.000000e+000 result=40 12:50:18 Config A/D Result=40 12:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:18 Get A/D filter: -9.255963e+061 result=40 12:50:18 Get A/D value=-858993460 result=40 12:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:18 Aux= 12:50:18 Message to Camera, serial 221901 queued 12:50:55 Received message from Master: op=PointingHead serial=221914 12:50:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:50:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:50:55 Point started: ret=0 12:50:55 point_skyscan result=0 12:50:56 Check angles 12:50:56 SkyScan query 12:50:57 SkyScan query done: ret=0 az=64.245<-4283 ze=66.555<-7563 Statuses=0009 0008 12:50:57 Msec=0 True Az=64.245 Ze=66.555 Az status=0009 Ze status=0008 12:50:57 Check angles 12:50:57 SkyScan query 12:50:57 SkyScan query done: ret=0 az=81.495<-5433 ze=66.51<-7566 Statuses=0009 0008 12:50:57 Msec=750 True Az=81.495 Ze=66.51 Az status=0009 Ze status=0008 12:50:58 Check angles 12:50:58 SkyScan query 12:50:58 SkyScan query done: ret=0 az=99.48<-6632 ze=66.495<-7567 Statuses=0009 0008 12:50:58 Msec=1500 True Az=99.48 Ze=66.495 Az status=0009 Ze status=0008 12:50:58 Check angles 12:50:58 SkyScan query 12:50:59 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 12:50:59 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 12:50:59 Check angles 12:50:59 SkyScan query 12:51:00 SkyScan query done: ret=0 az=134.535<-8969 ze=66.495<-7567 Statuses=0009 0008 12:51:00 Msec=3000 True Az=134.535 Ze=66.495 Az status=0009 Ze status=0008 12:51:00 Check angles 12:51:00 SkyScan query 12:51:00 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 12:51:00 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 12:51:01 Check angles 12:51:01 SkyScan query 12:51:01 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:51:01 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:51:01 Message to Master queued w/err=0: serial=221914 error=0 12:51:06 Received message from Master: op=Filter serial=221915 12:51:06 Color wheel filter change from 0 to 0 12:51:06 FLIGetFilterPos err=0 currentPosition=0 12:51:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:06 Filter is already there-color wheel unchanged 12:51:06 Received message from Master: op=Shutter serial=221916 12:51:06 Shutter LASER close 12:51:06 Received message from Camera: op=State serial=221918 12:51:06 GetSingleValue result=40 Value=cccccccc 12:51:06 SkyScan query 12:51:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:51:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:07 Parameters OK 12:51:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:07 Set A/D data flow result=40 12:51:07 Set A/D channel type result=40 12:51:07 Set A/D encoding result=40 12:51:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:07 Set channel filter=0.000000e+000 result=40 12:51:07 Config A/D Result=40 12:51:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:07 Get A/D filter: -9.255963e+061 result=40 12:51:07 Get A/D value=-858993460 result=40 12:51:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:07 Parameters OK 12:51:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:07 Set A/D data flow result=40 12:51:07 Set A/D channel type result=40 12:51:07 Set A/D encoding result=40 12:51:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:07 Set channel filter=0.000000e+000 result=40 12:51:07 Config A/D Result=40 12:51:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:07 Get A/D filter: -9.255963e+061 result=40 12:51:07 Get A/D value=-858993460 result=40 12:51:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:07 Aux= 12:51:07 Message to Camera, serial 221918 queued 12:51:44 Received message from Master: op=PointingHead serial=221931 12:51:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:51:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:51:44 Point started: ret=0 12:51:44 point_skyscan result=0 12:51:45 Check angles 12:51:45 SkyScan query 12:51:45 SkyScan query done: ret=0 az=134.97<-8998 ze=36.69<-9554 Statuses=0009 0009 12:51:45 Msec=0 True Az=134.97 Ze=36.69 Az status=0009 Ze status=0009 12:51:46 Check angles 12:51:46 SkyScan query 12:51:46 SkyScan query done: ret=0 az=117.48<-7832 ze=15.735<-10951 Statuses=0009 0009 12:51:46 Msec=750 True Az=117.48 Ze=15.735 Az status=0009 Ze status=0009 12:51:46 Check angles 12:51:46 SkyScan query 12:51:47 SkyScan query done: ret=0 az=100.125<-6675 ze=-5.22<-12348 Statuses=0009 0009 12:51:47 Msec=1500 True Az=100.125 Ze=-5.22 Az status=0009 Ze status=0009 12:51:47 Check angles 12:51:47 SkyScan query 12:51:48 SkyScan query done: ret=0 az=82.56<-5504 ze=-26.16<-13744 Statuses=0009 0009 12:51:48 Msec=2250 True Az=82.56 Ze=-26.16 Az status=0009 Ze status=0009 12:51:48 Check angles 12:51:48 SkyScan query 12:51:48 SkyScan query done: ret=0 az=65.19<-4346 ze=-38.58<-14572 Statuses=0009 0008 12:51:48 Msec=3000 True Az=65.19 Ze=-38.58 Az status=0009 Ze status=0008 12:51:49 Check angles 12:51:49 SkyScan query 12:51:49 SkyScan query done: ret=0 az=47.58<-3172 ze=-38.52<-14568 Statuses=0009 0008 12:51:49 Msec=3750 True Az=47.58 Ze=-38.52 Az status=0009 Ze status=0008 12:51:49 Check angles 12:51:49 SkyScan query 12:51:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:51:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:51:50 Message to Master queued w/err=0: serial=221931 error=0 12:51:55 Received message from Master: op=Filter serial=221932 12:51:55 Color wheel filter change from 0 to 0 12:51:55 FLIGetFilterPos err=0 currentPosition=0 12:51:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:55 Filter is already there-color wheel unchanged 12:51:55 Received message from Master: op=Shutter serial=221933 12:51:55 Shutter LASER close 12:51:55 Received message from Camera: op=State serial=221935 12:51:55 GetSingleValue result=40 Value=cccccccc 12:51:55 SkyScan query 12:51:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:51:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:56 Parameters OK 12:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:56 Set A/D data flow result=40 12:51:56 Set A/D channel type result=40 12:51:56 Set A/D encoding result=40 12:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:56 Set channel filter=0.000000e+000 result=40 12:51:56 Config A/D Result=40 12:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:56 Get A/D filter: -9.255963e+061 result=40 12:51:56 Get A/D value=-858993460 result=40 12:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:56 Parameters OK 12:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:56 Set A/D data flow result=40 12:51:56 Set A/D channel type result=40 12:51:56 Set A/D encoding result=40 12:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:56 Set channel filter=0.000000e+000 result=40 12:51:56 Config A/D Result=40 12:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:56 Get A/D filter: -9.255963e+061 result=40 12:51:56 Get A/D value=-858993460 result=40 12:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:56 Aux= 12:51:56 Message to Camera, serial 221935 queued 12:52:33 Received message from Master: op=PointingHead serial=221948 12:52:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:52:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:52:33 Point started: ret=0 12:52:33 point_skyscan result=0 12:52:34 Check angles 12:52:34 SkyScan query 12:52:34 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.325<-16555 Statuses=0009 0009 12:52:34 Msec=0 True Az=64.02 Ze=-68.325 Az status=0009 Ze status=0009 12:52:34 Check angles 12:52:34 SkyScan query 12:52:35 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.31<-17954 Statuses=0009 0009 12:52:35 Msec=750 True Az=81.36 Ze=-89.31 Az status=0009 Ze status=0009 12:52:35 Check angles 12:52:35 SkyScan query 12:52:36 SkyScan query done: ret=0 az=98.94<-6596 ze=-110.25<-19350 Statuses=0009 0009 12:52:36 Msec=1500 True Az=98.94 Ze=-110.25 Az status=0009 Ze status=0009 12:52:36 Check angles 12:52:36 SkyScan query 12:52:37 SkyScan query done: ret=0 az=116.37<-7758 ze=-131.19<-20746 Statuses=0009 0009 12:52:37 Msec=2250 True Az=116.37 Ze=-131.19 Az status=0009 Ze status=0009 12:52:37 Check angles 12:52:37 SkyScan query 12:52:37 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 12:52:37 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 12:52:37 Check angles 12:52:37 SkyScan query 12:52:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:52:38 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:52:38 Message to Master queued w/err=0: serial=221948 error=0 12:52:43 Received message from Master: op=Filter serial=221949 12:52:43 Color wheel filter change from 0 to 0 12:52:43 FLIGetFilterPos err=0 currentPosition=0 12:52:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:43 Filter is already there-color wheel unchanged 12:52:43 Received message from Master: op=Shutter serial=221950 12:52:43 Shutter LASER close 12:52:43 Received message from Camera: op=State serial=221952 12:52:43 GetSingleValue result=40 Value=cccccccc 12:52:43 SkyScan query 12:52:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:52:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:44 Parameters OK 12:52:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:44 Set A/D data flow result=40 12:52:44 Set A/D channel type result=40 12:52:44 Set A/D encoding result=40 12:52:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:44 Set channel filter=0.000000e+000 result=40 12:52:44 Config A/D Result=40 12:52:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:44 Get A/D filter: -9.255963e+061 result=40 12:52:44 Get A/D value=-858993460 result=40 12:52:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:44 Parameters OK 12:52:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:44 Set A/D data flow result=40 12:52:44 Set A/D channel type result=40 12:52:44 Set A/D encoding result=40 12:52:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:44 Set channel filter=0.000000e+000 result=40 12:52:44 Config A/D Result=40 12:52:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:44 Get A/D filter: -9.255963e+061 result=40 12:52:44 Get A/D value=-858993460 result=40 12:52:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:44 Aux= 12:52:44 Message to Camera, serial 221952 queued 12:53:21 Received message from Master: op=PointingHead serial=221965 12:53:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:53:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:53:21 Point started: ret=0 12:53:21 point_skyscan result=0 12:53:22 Check angles 12:53:22 SkyScan query 12:53:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.97<-23398 Statuses=0009 0009 12:53:22 Msec=0 True Az=113.01 Ze=-170.97 Az status=0009 Ze status=0009 12:53:22 Check angles 12:53:22 SkyScan query 12:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:53:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:53:23 Message to Master queued w/err=0: serial=221965 error=0 12:53:28 Received message from Master: op=Filter serial=221966 12:53:28 Color wheel filter change from 0 to 0 12:53:28 FLIGetFilterPos err=0 currentPosition=0 12:53:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:28 Filter is already there-color wheel unchanged 12:53:28 Received message from Master: op=Shutter serial=221967 12:53:28 Shutter LASER open 12:53:28 Received message from Camera: op=State serial=221969 12:53:28 GetSingleValue result=40 Value=cccccccc 12:53:28 SkyScan query 12:53:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:53:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:29 Parameters OK 12:53:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:29 Set A/D data flow result=40 12:53:29 Set A/D channel type result=40 12:53:29 Set A/D encoding result=40 12:53:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:29 Set channel filter=0.000000e+000 result=40 12:53:29 Config A/D Result=40 12:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:29 Get A/D filter: -9.255963e+061 result=40 12:53:29 Get A/D value=-858993460 result=40 12:53:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:29 Parameters OK 12:53:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:29 Set A/D data flow result=40 12:53:29 Set A/D channel type result=40 12:53:29 Set A/D encoding result=40 12:53:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:29 Set channel filter=0.000000e+000 result=40 12:53:29 Config A/D Result=40 12:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:29 Get A/D filter: -9.255963e+061 result=40 12:53:29 Get A/D value=-858993460 result=40 12:53:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:29 Aux= 12:53:29 Message to Camera, serial 221969 queued 12:53:37 Received message from Master: op=Shutter serial=221979 12:53:37 Shutter LASER close 12:53:38 Received message from Master: op=PointingHead serial=221983 12:53:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:53:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:53:38 Point started: ret=0 12:53:38 point_skyscan result=0 12:53:39 Check angles 12:53:39 SkyScan query 12:53:40 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.16<-21544 Statuses=0009 0009 12:53:40 Msec=0 True Az=136.17 Ze=-143.16 Az status=0009 Ze status=0009 12:53:40 Check angles 12:53:40 SkyScan query 12:53:40 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.205<-20147 Statuses=0009 0009 12:53:40 Msec=750 True Az=153.555 Ze=-122.205 Az status=0009 Ze status=0009 12:53:41 Check angles 12:53:41 SkyScan query 12:53:41 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.77<-18718 Statuses=0009 0009 12:53:41 Msec=1500 True Az=171.45 Ze=-100.77 Az status=0009 Ze status=0009 12:53:41 Check angles 12:53:41 SkyScan query 12:53:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.875<-17325 Statuses=0008 0009 12:53:42 Msec=2250 True Az=175.995 Ze=-79.875 Az status=0008 Ze status=0009 12:53:42 Check angles 12:53:42 SkyScan query 12:53:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.875<-15925 Statuses=0008 0009 12:53:43 Msec=3000 True Az=175.995 Ze=-58.875 Az status=0008 Ze status=0009 12:53:43 Check angles 12:53:43 SkyScan query 12:53:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:53:43 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:53:43 Message to Master queued w/err=0: serial=221983 error=0 12:53:48 Received message from Master: op=Filter serial=221984 12:53:48 Color wheel filter change from 0 to 0 12:53:48 FLIGetFilterPos err=0 currentPosition=0 12:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:48 Filter is already there-color wheel unchanged 12:53:49 Received message from Master: op=Shutter serial=221985 12:53:49 Shutter LASER close 12:53:49 Received message from Camera: op=State serial=221987 12:53:49 GetSingleValue result=40 Value=cccccccc 12:53:49 SkyScan query 12:53:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:53:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:49 Parameters OK 12:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:49 Set A/D data flow result=40 12:53:49 Set A/D channel type result=40 12:53:49 Set A/D encoding result=40 12:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:49 Set channel filter=0.000000e+000 result=40 12:53:49 Config A/D Result=40 12:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:49 Get A/D filter: -9.255963e+061 result=40 12:53:49 Get A/D value=-858993460 result=40 12:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:49 Parameters OK 12:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:49 Set A/D data flow result=40 12:53:49 Set A/D channel type result=40 12:53:49 Set A/D encoding result=40 12:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:49 Set channel filter=0.000000e+000 result=40 12:53:49 Config A/D Result=40 12:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:49 Get A/D filter: -9.255963e+061 result=40 12:53:49 Get A/D value=-858993460 result=40 12:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:49 Aux= 12:53:49 Message to Camera, serial 221987 queued 12:54:26 Received message from Master: op=PointingHead serial=222000 12:54:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:54:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:54:27 Point started: ret=0 12:54:27 point_skyscan result=0 12:54:27 Check angles 12:54:27 SkyScan query 12:54:28 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.225<-13415 Statuses=0009 0009 12:54:28 Msec=0 True Az=152.625 Ze=-21.225 Az status=0009 Ze status=0009 12:54:28 Check angles 12:54:28 SkyScan query 12:54:29 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.255<-12017 Statuses=0009 0009 12:54:29 Msec=750 True Az=135.15 Ze=-0.255 Az status=0009 Ze status=0009 12:54:29 Check angles 12:54:29 SkyScan query 12:54:29 SkyScan query done: ret=0 az=117.15<-7810 ze=21.12<-10592 Statuses=0009 0009 12:54:29 Msec=1500 True Az=117.15 Ze=21.12 Az status=0009 Ze status=0009 12:54:30 Check angles 12:54:30 SkyScan query 12:54:30 SkyScan query done: ret=0 az=99.9<-6660 ze=42.075<-9195 Statuses=0009 0009 12:54:30 Msec=2250 True Az=99.9 Ze=42.075 Az status=0009 Ze status=0009 12:54:30 Check angles 12:54:30 SkyScan query 12:54:31 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 12:54:31 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 12:54:31 Check angles 12:54:31 SkyScan query 12:54:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:54:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:54:32 Message to Master queued w/err=0: serial=222000 error=0 12:54:37 Received message from Master: op=Filter serial=222001 12:54:37 Color wheel filter change from 0 to 0 12:54:37 FLIGetFilterPos err=0 currentPosition=0 12:54:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:37 Filter is already there-color wheel unchanged 12:54:37 Received message from Master: op=Shutter serial=222002 12:54:37 Shutter LASER close 12:54:37 Received message from Camera: op=State serial=222004 12:54:37 GetSingleValue result=40 Value=cccccccc 12:54:37 SkyScan query 12:54:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:54:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:37 Parameters OK 12:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:37 Set A/D data flow result=40 12:54:37 Set A/D channel type result=40 12:54:37 Set A/D encoding result=40 12:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:37 Set channel filter=0.000000e+000 result=40 12:54:37 Config A/D Result=40 12:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:37 Get A/D filter: -9.255963e+061 result=40 12:54:37 Get A/D value=-858993460 result=40 12:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:37 Parameters OK 12:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:37 Set A/D data flow result=40 12:54:37 Set A/D channel type result=40 12:54:37 Set A/D encoding result=40 12:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:37 Set channel filter=0.000000e+000 result=40 12:54:37 Config A/D Result=40 12:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:37 Get A/D filter: -9.255963e+061 result=40 12:54:37 Get A/D value=-858993460 result=40 12:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:37 Aux= 12:54:37 Message to Camera, serial 222004 queued 12:55:14 Received message from Master: op=PointingHead serial=222017 12:55:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:55:14 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:55:15 Point started: ret=0 12:55:15 point_skyscan result=0 12:55:15 Check angles 12:55:15 SkyScan query 12:55:16 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 12:55:16 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 12:55:16 Check angles 12:55:16 SkyScan query 12:55:17 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 12:55:17 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 12:55:17 Check angles 12:55:17 SkyScan query 12:55:18 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 12:55:18 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 12:55:18 Check angles 12:55:18 SkyScan query 12:55:18 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 12:55:18 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 12:55:18 Check angles 12:55:18 SkyScan query 12:55:19 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:55:19 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:55:19 Check angles 12:55:19 SkyScan query 12:55:20 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:55:20 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:55:20 Message to Master queued w/err=0: serial=222017 error=0 12:55:25 Received message from Master: op=Filter serial=222018 12:55:25 Color wheel filter change from 0 to 0 12:55:25 FLIGetFilterPos err=0 currentPosition=0 12:55:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:25 Filter is already there-color wheel unchanged 12:55:25 Received message from Master: op=Shutter serial=222019 12:55:25 Shutter LASER close 12:55:25 Received message from Camera: op=State serial=222021 12:55:25 GetSingleValue result=40 Value=cccccccc 12:55:25 SkyScan query 12:55:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:55:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:26 Parameters OK 12:55:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:26 Set A/D data flow result=40 12:55:26 Set A/D channel type result=40 12:55:26 Set A/D encoding result=40 12:55:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:26 Set channel filter=0.000000e+000 result=40 12:55:26 Config A/D Result=40 12:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:26 Get A/D filter: -9.255963e+061 result=40 12:55:26 Get A/D value=-858993460 result=40 12:55:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:26 Parameters OK 12:55:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:26 Set A/D data flow result=40 12:55:26 Set A/D channel type result=40 12:55:26 Set A/D encoding result=40 12:55:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:26 Set channel filter=0.000000e+000 result=40 12:55:26 Config A/D Result=40 12:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:26 Get A/D filter: -9.255963e+061 result=40 12:55:26 Get A/D value=-858993460 result=40 12:55:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:26 Aux= 12:55:26 Message to Camera, serial 222021 queued [UTC 2018-12-17 12:55:52] 12:56:02 Received message from Master: op=PointingHead serial=222034 12:56:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:56:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:56:03 Point started: ret=0 12:56:03 point_skyscan result=0 12:56:04 Check angles 12:56:04 SkyScan query 12:56:04 SkyScan query done: ret=0 az=153.21<-10214 ze=8.955<-11403 Statuses=0009 0009 12:56:04 Msec=0 True Az=153.21 Ze=8.955 Az status=0009 Ze status=0009 12:56:04 Check angles 12:56:04 SkyScan query 12:56:05 SkyScan query done: ret=0 az=135.81<-9054 ze=-11.985<-12799 Statuses=0009 0009 12:56:05 Msec=750 True Az=135.81 Ze=-11.985 Az status=0009 Ze status=0009 12:56:05 Check angles 12:56:05 SkyScan query 12:56:06 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.36<-14224 Statuses=0009 0009 12:56:06 Msec=1500 True Az=117.84 Ze=-33.36 Az status=0009 Ze status=0009 12:56:06 Check angles 12:56:06 SkyScan query 12:56:06 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.54<-15436 Statuses=0009 0009 12:56:06 Msec=2250 True Az=100.485 Ze=-51.54 Az status=0009 Ze status=0009 12:56:07 Check angles 12:56:07 SkyScan query 12:56:07 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:56:07 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:56:07 Check angles 12:56:07 SkyScan query 12:56:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:56:08 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:56:08 Message to Master queued w/err=0: serial=222034 error=0 12:56:13 Received message from Master: op=Filter serial=222035 12:56:13 Color wheel filter change from 0 to 0 12:56:13 FLIGetFilterPos err=0 currentPosition=0 12:56:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:13 Filter is already there-color wheel unchanged 12:56:13 Received message from Master: op=Shutter serial=222036 12:56:13 Shutter LASER close 12:56:13 Received message from Camera: op=State serial=222038 12:56:13 GetSingleValue result=40 Value=cccccccc 12:56:13 SkyScan query 12:56:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:56:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:14 Parameters OK 12:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:14 Set A/D data flow result=40 12:56:14 Set A/D channel type result=40 12:56:14 Set A/D encoding result=40 12:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:14 Set channel filter=0.000000e+000 result=40 12:56:14 Config A/D Result=40 12:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:14 Get A/D filter: -9.255963e+061 result=40 12:56:14 Get A/D value=-858993460 result=40 12:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:14 Parameters OK 12:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:14 Set A/D data flow result=40 12:56:14 Set A/D channel type result=40 12:56:14 Set A/D encoding result=40 12:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:14 Set channel filter=0.000000e+000 result=40 12:56:14 Config A/D Result=40 12:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:14 Get A/D filter: -9.255963e+061 result=40 12:56:14 Get A/D value=-858993460 result=40 12:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:14 Aux= 12:56:14 Message to Camera, serial 222038 queued 12:56:50 Received message from Master: op=PointingHead serial=222051 12:56:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:56:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:56:51 Point started: ret=0 12:56:51 point_skyscan result=0 12:56:52 Check angles 12:56:52 SkyScan query 12:56:52 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.42<-17428 Statuses=0009 0009 12:56:52 Msec=0 True Az=109.14 Ze=-81.42 Az status=0009 Ze status=0009 12:56:52 Check angles 12:56:52 SkyScan query 12:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 12:56:53 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 12:56:53 Check angles 12:56:53 SkyScan query 12:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 12:56:54 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 12:56:54 Check angles 12:56:54 SkyScan query 12:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.675<-21645 Statuses=0008 0009 12:56:54 Msec=2250 True Az=112.995 Ze=-144.675 Az status=0008 Ze status=0009 12:56:55 Check angles 12:56:55 SkyScan query 12:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 12:56:55 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 12:56:55 Check angles 12:56:55 SkyScan query 12:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:56:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:56:56 Message to Master queued w/err=0: serial=222051 error=0 12:57:01 Received message from Master: op=Filter serial=222052 12:57:01 Color wheel filter change from 0 to 0 12:57:01 FLIGetFilterPos err=0 currentPosition=0 12:57:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:01 Filter is already there-color wheel unchanged 12:57:01 Received message from Master: op=Shutter serial=222053 12:57:01 Shutter LASER open 12:57:01 Received message from Camera: op=State serial=222055 12:57:01 GetSingleValue result=40 Value=cccccccc 12:57:01 SkyScan query 12:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:57:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:02 Parameters OK 12:57:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:02 Set A/D data flow result=40 12:57:02 Set A/D channel type result=40 12:57:02 Set A/D encoding result=40 12:57:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:02 Set channel filter=0.000000e+000 result=40 12:57:02 Config A/D Result=40 12:57:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:02 Get A/D filter: -9.255963e+061 result=40 12:57:02 Get A/D value=-858993460 result=40 12:57:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:02 Parameters OK 12:57:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:02 Set A/D data flow result=40 12:57:02 Set A/D channel type result=40 12:57:02 Set A/D encoding result=40 12:57:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:02 Set channel filter=0.000000e+000 result=40 12:57:02 Config A/D Result=40 12:57:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:02 Get A/D filter: -9.255963e+061 result=40 12:57:02 Get A/D value=-858993460 result=40 12:57:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:02 Aux= 12:57:02 Message to Camera, serial 222055 queued 12:57:09 Received message from Master: op=Shutter serial=222064 12:57:09 Shutter LASER close 12:57:10 Received message from Master: op=PointingHead serial=222068 12:57:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:57:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:57:10 Point started: ret=0 12:57:10 point_skyscan result=0 12:57:11 Check angles 12:57:11 SkyScan query 12:57:12 SkyScan query done: ret=0 az=89.82<-5988 ze=157.14<-1524 Statuses=0009 0009 12:57:12 Msec=0 True Az=89.82 Ze=157.14 Az status=0009 Ze status=0009 12:57:12 Check angles 12:57:12 SkyScan query 12:57:12 SkyScan query done: ret=0 az=71.955<-4797 ze=135.765<-2949 Statuses=0009 0009 12:57:12 Msec=750 True Az=71.955 Ze=135.765 Az status=0009 Ze status=0009 12:57:12 Check angles 12:57:12 SkyScan query 12:57:13 SkyScan query done: ret=0 az=54.69<-3646 ze=114.765<-4349 Statuses=0009 0009 12:57:13 Msec=1500 True Az=54.69 Ze=114.765 Az status=0009 Ze status=0009 12:57:13 Check angles 12:57:13 SkyScan query 12:57:14 SkyScan query done: ret=0 az=41.01<-2734 ze=93.84<-5744 Statuses=0009 0009 12:57:14 Msec=2250 True Az=41.01 Ze=93.84 Az status=0009 Ze status=0009 12:57:14 Check angles 12:57:14 SkyScan query 12:57:15 SkyScan query done: ret=0 az=40.98<-2732 ze=72.435<-7171 Statuses=0008 0009 12:57:15 Msec=3000 True Az=40.98 Ze=72.435 Az status=0008 Ze status=0009 12:57:15 Check angles 12:57:15 SkyScan query 12:57:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 12:57:15 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 12:57:16 Check angles 12:57:16 SkyScan query 12:57:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:57:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:57:16 Message to Master queued w/err=0: serial=222068 error=0 12:57:21 Received message from Master: op=Filter serial=222069 12:57:21 Color wheel filter change from 0 to 0 12:57:21 FLIGetFilterPos err=0 currentPosition=0 12:57:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:21 Filter is already there-color wheel unchanged 12:57:21 Received message from Master: op=Shutter serial=222070 12:57:21 Shutter LASER close 12:57:21 Received message from Camera: op=State serial=222072 12:57:21 GetSingleValue result=40 Value=cccccccc 12:57:21 SkyScan query 12:57:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:57:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:22 Parameters OK 12:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:22 Set A/D data flow result=40 12:57:22 Set A/D channel type result=40 12:57:22 Set A/D encoding result=40 12:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:22 Set channel filter=0.000000e+000 result=40 12:57:22 Config A/D Result=40 12:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:22 Get A/D filter: -9.255963e+061 result=40 12:57:22 Get A/D value=-858993460 result=40 12:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:22 Parameters OK 12:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:22 Set A/D data flow result=40 12:57:22 Set A/D channel type result=40 12:57:22 Set A/D encoding result=40 12:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:22 Set channel filter=0.000000e+000 result=40 12:57:22 Config A/D Result=40 12:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:22 Get A/D filter: -9.255963e+061 result=40 12:57:22 Get A/D value=-858993460 result=40 12:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:22 Aux= 12:57:22 Message to Camera, serial 222072 queued 12:57:59 Received message from Master: op=PointingHead serial=222085 12:57:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:57:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:57:59 Point started: ret=0 12:57:59 point_skyscan result=0 12:58:00 Check angles 12:58:00 SkyScan query 12:58:01 SkyScan query done: ret=0 az=63.795<-4253 ze=66.54<-7564 Statuses=0009 0008 12:58:01 Msec=0 True Az=63.795 Ze=66.54 Az status=0009 Ze status=0008 12:58:01 Check angles 12:58:01 SkyScan query 12:58:01 SkyScan query done: ret=0 az=81.105<-5407 ze=66.51<-7566 Statuses=0009 0008 12:58:01 Msec=750 True Az=81.105 Ze=66.51 Az status=0009 Ze status=0008 12:58:01 Check angles 12:58:01 SkyScan query 12:58:02 SkyScan query done: ret=0 az=98.67<-6578 ze=66.495<-7567 Statuses=0009 0008 12:58:02 Msec=1500 True Az=98.67 Ze=66.495 Az status=0009 Ze status=0008 12:58:02 Check angles 12:58:02 SkyScan query 12:58:03 SkyScan query done: ret=0 az=116.625<-7775 ze=66.495<-7567 Statuses=0009 0008 12:58:03 Msec=2250 True Az=116.625 Ze=66.495 Az status=0009 Ze status=0008 12:58:03 Check angles 12:58:03 SkyScan query 12:58:04 SkyScan query done: ret=0 az=134.37<-8958 ze=66.495<-7567 Statuses=0009 0008 12:58:04 Msec=3000 True Az=134.37 Ze=66.495 Az status=0009 Ze status=0008 12:58:04 Check angles 12:58:04 SkyScan query 12:58:04 SkyScan query done: ret=0 az=151.83<-10122 ze=66.495<-7567 Statuses=0009 0008 12:58:04 Msec=3750 True Az=151.83 Ze=66.495 Az status=0009 Ze status=0008 12:58:04 Check angles 12:58:04 SkyScan query 12:58:05 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:58:05 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:58:05 Message to Master queued w/err=0: serial=222085 error=0 12:58:10 Received message from Master: op=Filter serial=222086 12:58:10 Color wheel filter change from 0 to 0 12:58:10 FLIGetFilterPos err=0 currentPosition=0 12:58:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:10 Filter is already there-color wheel unchanged 12:58:10 Received message from Master: op=Shutter serial=222087 12:58:10 Shutter LASER close 12:58:10 Received message from Camera: op=State serial=222089 12:58:10 GetSingleValue result=40 Value=cccccccc 12:58:10 SkyScan query 12:58:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:58:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:11 Parameters OK 12:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:11 Set A/D data flow result=40 12:58:11 Set A/D channel type result=40 12:58:11 Set A/D encoding result=40 12:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:11 Set channel filter=0.000000e+000 result=40 12:58:11 Config A/D Result=40 12:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:11 Get A/D filter: -9.255963e+061 result=40 12:58:11 Get A/D value=-858993460 result=40 12:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:11 Parameters OK 12:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:11 Set A/D data flow result=40 12:58:11 Set A/D channel type result=40 12:58:11 Set A/D encoding result=40 12:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:11 Set channel filter=0.000000e+000 result=40 12:58:11 Config A/D Result=40 12:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:11 Get A/D filter: -9.255963e+061 result=40 12:58:11 Get A/D value=-858993460 result=40 12:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:11 Aux= 12:58:11 Message to Camera, serial 222089 queued 12:58:48 Received message from Master: op=PointingHead serial=222102 12:58:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:58:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:58:48 Point started: ret=0 12:58:48 point_skyscan result=0 12:58:49 Check angles 12:58:49 SkyScan query 12:58:49 SkyScan query done: ret=0 az=134.775<-8985 ze=36.48<-9568 Statuses=0009 0009 12:58:49 Msec=0 True Az=134.775 Ze=36.48 Az status=0009 Ze status=0009 12:58:50 Check angles 12:58:50 SkyScan query 12:58:50 SkyScan query done: ret=0 az=117.285<-7819 ze=15.54<-10964 Statuses=0009 0009 12:58:50 Msec=750 True Az=117.285 Ze=15.54 Az status=0009 Ze status=0009 12:58:50 Check angles 12:58:50 SkyScan query 12:58:51 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.43<-12362 Statuses=0009 0009 12:58:51 Msec=1500 True Az=99.915 Ze=-5.43 Az status=0009 Ze status=0009 12:58:51 Check angles 12:58:51 SkyScan query 12:58:52 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.835<-13789 Statuses=0009 0009 12:58:52 Msec=2250 True Az=82.08 Ze=-26.835 Az status=0009 Ze status=0009 12:58:52 Check angles 12:58:52 SkyScan query 12:58:52 SkyScan query done: ret=0 az=64.065<-4271 ze=-38.58<-14572 Statuses=0009 0008 12:58:52 Msec=3000 True Az=64.065 Ze=-38.58 Az status=0009 Ze status=0008 12:58:53 Check angles 12:58:53 SkyScan query 12:58:53 SkyScan query done: ret=0 az=46.725<-3115 ze=-38.52<-14568 Statuses=0009 0008 12:58:53 Msec=3750 True Az=46.725 Ze=-38.52 Az status=0009 Ze status=0008 12:58:53 Check angles 12:58:53 SkyScan query 12:58:54 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 12:58:54 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 12:58:54 Message to Master queued w/err=0: serial=222102 error=0 12:58:59 Received message from Master: op=Filter serial=222103 12:58:59 Color wheel filter change from 0 to 0 12:58:59 FLIGetFilterPos err=0 currentPosition=0 12:58:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:59 Filter is already there-color wheel unchanged 12:58:59 Received message from Master: op=Shutter serial=222104 12:58:59 Shutter LASER close 12:58:59 Received message from Camera: op=State serial=222106 12:58:59 GetSingleValue result=40 Value=cccccccc 12:58:59 SkyScan query 12:59:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:00 Parameters OK 12:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:00 Set A/D data flow result=40 12:59:00 Set A/D channel type result=40 12:59:00 Set A/D encoding result=40 12:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:00 Set channel filter=0.000000e+000 result=40 12:59:00 Config A/D Result=40 12:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:00 Get A/D filter: -9.255963e+061 result=40 12:59:00 Get A/D value=-858993460 result=40 12:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:00 Parameters OK 12:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:00 Set A/D data flow result=40 12:59:00 Set A/D channel type result=40 12:59:00 Set A/D encoding result=40 12:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:00 Set channel filter=0.000000e+000 result=40 12:59:00 Config A/D Result=40 12:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:00 Get A/D filter: -9.255963e+061 result=40 12:59:00 Get A/D value=-858993460 result=40 12:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:00 Aux= 12:59:00 Message to Camera, serial 222106 queued 12:59:37 Received message from Master: op=PointingHead serial=222119 12:59:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:59:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:59:37 Point started: ret=0 12:59:37 point_skyscan result=0 12:59:38 Check angles 12:59:38 SkyScan query 12:59:38 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.265<-16551 Statuses=0009 0009 12:59:38 Msec=0 True Az=63.915 Ze=-68.265 Az status=0009 Ze status=0009 12:59:38 Check angles 12:59:38 SkyScan query 12:59:39 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.7<-17980 Statuses=0009 0009 12:59:39 Msec=750 True Az=81.795 Ze=-89.7 Az status=0009 Ze status=0009 12:59:39 Check angles 12:59:39 SkyScan query 12:59:40 SkyScan query done: ret=0 az=99.675<-6645 ze=-111.06<-19404 Statuses=0009 0009 12:59:40 Msec=1500 True Az=99.675 Ze=-111.06 Az status=0009 Ze status=0009 12:59:40 Check angles 12:59:40 SkyScan query 12:59:40 SkyScan query done: ret=0 az=117.195<-7813 ze=-132<-20800 Statuses=0009 0009 12:59:40 Msec=2250 True Az=117.195 Ze=-132 Az status=0009 Ze status=0009 12:59:41 Check angles 12:59:41 SkyScan query 12:59:41 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 12:59:41 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 12:59:41 Check angles 12:59:41 SkyScan query 12:59:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:59:42 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:59:42 Message to Master queued w/err=0: serial=222119 error=0 12:59:47 Received message from Master: op=Filter serial=222120 12:59:47 Color wheel filter change from 0 to 0 12:59:47 FLIGetFilterPos err=0 currentPosition=0 12:59:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:47 Filter is already there-color wheel unchanged 12:59:47 Received message from Master: op=Shutter serial=222121 12:59:47 Shutter LASER close 12:59:47 Received message from Camera: op=State serial=222123 12:59:47 GetSingleValue result=40 Value=cccccccc 12:59:47 SkyScan query 12:59:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:59:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:48 Parameters OK 12:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:48 Set A/D data flow result=40 12:59:48 Set A/D channel type result=40 12:59:48 Set A/D encoding result=40 12:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:48 Set channel filter=0.000000e+000 result=40 12:59:48 Config A/D Result=40 12:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:48 Get A/D filter: -9.255963e+061 result=40 12:59:48 Get A/D value=-858993460 result=40 12:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:48 Parameters OK 12:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:48 Set A/D data flow result=40 12:59:48 Set A/D channel type result=40 12:59:48 Set A/D encoding result=40 12:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:48 Set channel filter=0.000000e+000 result=40 12:59:48 Config A/D Result=40 12:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:48 Get A/D filter: -9.255963e+061 result=40 12:59:48 Get A/D value=-858993460 result=40 12:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:48 Aux= 12:59:48 Message to Camera, serial 222123 queued 13:00:25 Received message from Master: op=PointingHead serial=222136 13:00:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:00:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:00:25 Point started: ret=0 13:00:25 point_skyscan result=0 13:00:26 Check angles 13:00:26 SkyScan query 13:00:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 13:00:26 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 13:00:26 Check angles 13:00:26 SkyScan query 13:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:00:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:00:27 Message to Master queued w/err=0: serial=222136 error=0 13:00:32 Received message from Master: op=Filter serial=222137 13:00:32 Color wheel filter change from 0 to 0 13:00:32 FLIGetFilterPos err=0 currentPosition=0 13:00:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:32 Filter is already there-color wheel unchanged 13:00:32 Received message from Master: op=Shutter serial=222138 13:00:32 Shutter LASER open 13:00:32 Received message from Camera: op=State serial=222140 13:00:32 GetSingleValue result=40 Value=cccccccc 13:00:32 SkyScan query 13:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:00:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:33 Parameters OK 13:00:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:33 Set A/D data flow result=40 13:00:33 Set A/D channel type result=40 13:00:33 Set A/D encoding result=40 13:00:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:33 Set channel filter=0.000000e+000 result=40 13:00:33 Config A/D Result=40 13:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:33 Get A/D filter: -9.255963e+061 result=40 13:00:33 Get A/D value=-858993460 result=40 13:00:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:33 Parameters OK 13:00:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:33 Set A/D data flow result=40 13:00:33 Set A/D channel type result=40 13:00:33 Set A/D encoding result=40 13:00:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:33 Set channel filter=0.000000e+000 result=40 13:00:33 Config A/D Result=40 13:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:33 Get A/D filter: -9.255963e+061 result=40 13:00:33 Get A/D value=-858993460 result=40 13:00:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:33 Aux= 13:00:33 Message to Camera, serial 222140 queued 13:00:41 Received message from Master: op=Shutter serial=222150 13:00:41 Shutter LASER close 13:00:42 Received message from Master: op=PointingHead serial=222154 13:00:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:00:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:00:42 Point started: ret=0 13:00:42 point_skyscan result=0 13:00:43 Check angles 13:00:43 SkyScan query 13:00:44 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.445<-21563 Statuses=0009 0009 13:00:44 Msec=0 True Az=135.75 Ze=-143.445 Az status=0009 Ze status=0009 13:00:44 Check angles 13:00:44 SkyScan query 13:00:44 SkyScan query done: ret=0 az=153.3<-10220 ze=-122.475<-20165 Statuses=0009 0009 13:00:44 Msec=750 True Az=153.3 Ze=-122.475 Az status=0009 Ze status=0009 13:00:45 Check angles 13:00:45 SkyScan query 13:00:45 SkyScan query done: ret=0 az=171.165<-11411 ze=-101.1<-18740 Statuses=0009 0009 13:00:45 Msec=1500 True Az=171.165 Ze=-101.1 Az status=0009 Ze status=0009 13:00:45 Check angles 13:00:45 SkyScan query 13:00:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.16<-17344 Statuses=0008 0009 13:00:46 Msec=2250 True Az=175.995 Ze=-80.16 Az status=0008 Ze status=0009 13:00:46 Check angles 13:00:46 SkyScan query 13:00:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.71<-15914 Statuses=0008 0009 13:00:47 Msec=3000 True Az=175.995 Ze=-58.71 Az status=0008 Ze status=0009 13:00:47 Check angles 13:00:47 SkyScan query 13:00:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:00:47 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:00:47 Message to Master queued w/err=0: serial=222154 error=0 13:00:52 Received message from Master: op=Filter serial=222155 13:00:52 Color wheel filter change from 0 to 0 13:00:52 FLIGetFilterPos err=0 currentPosition=0 13:00:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:52 Filter is already there-color wheel unchanged 13:00:53 Received message from Master: op=Shutter serial=222156 13:00:53 Shutter LASER close 13:00:53 Received message from Camera: op=State serial=222158 13:00:53 GetSingleValue result=40 Value=cccccccc 13:00:53 SkyScan query 13:00:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:00:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:53 Parameters OK 13:00:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:53 Set A/D data flow result=40 13:00:53 Set A/D channel type result=40 13:00:53 Set A/D encoding result=40 13:00:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:53 Set channel filter=0.000000e+000 result=40 13:00:53 Config A/D Result=40 13:00:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:53 Get A/D filter: -9.255963e+061 result=40 13:00:53 Get A/D value=-858993460 result=40 13:00:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:53 Parameters OK 13:00:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:53 Set A/D data flow result=40 13:00:53 Set A/D channel type result=40 13:00:53 Set A/D encoding result=40 13:00:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:53 Set channel filter=0.000000e+000 result=40 13:00:53 Config A/D Result=40 13:00:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:53 Get A/D filter: -9.255963e+061 result=40 13:00:53 Get A/D value=-858993460 result=40 13:00:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:53 Aux= 13:00:53 Message to Camera, serial 222158 queued 13:01:30 Received message from Master: op=PointingHead serial=222171 13:01:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:01:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:01:31 Point started: ret=0 13:01:31 point_skyscan result=0 13:01:31 Check angles 13:01:31 SkyScan query 13:01:32 SkyScan query done: ret=0 az=153.15<-10210 ze=-22.02<-13468 Statuses=0009 0009 13:01:32 Msec=0 True Az=153.15 Ze=-22.02 Az status=0009 Ze status=0009 13:01:32 Check angles 13:01:32 SkyScan query 13:01:33 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.555<-12037 Statuses=0009 0009 13:01:33 Msec=750 True Az=135.36 Ze=-0.555 Az status=0009 Ze status=0009 13:01:33 Check angles 13:01:33 SkyScan query 13:01:33 SkyScan query done: ret=0 az=117.435<-7829 ze=20.82<-10612 Statuses=0009 0009 13:01:33 Msec=1500 True Az=117.435 Ze=20.82 Az status=0009 Ze status=0009 13:01:34 Check angles 13:01:34 SkyScan query 13:01:34 SkyScan query done: ret=0 az=100.065<-6671 ze=41.79<-9214 Statuses=0009 0009 13:01:34 Msec=2250 True Az=100.065 Ze=41.79 Az status=0009 Ze status=0009 13:01:34 Check angles 13:01:34 SkyScan query 13:01:35 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 13:01:35 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 13:01:35 Check angles 13:01:35 SkyScan query 13:01:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:01:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:01:36 Message to Master queued w/err=0: serial=222171 error=0 13:01:41 Received message from Master: op=Filter serial=222172 13:01:41 Color wheel filter change from 0 to 0 13:01:41 FLIGetFilterPos err=0 currentPosition=0 13:01:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:41 Filter is already there-color wheel unchanged 13:01:41 Received message from Master: op=Shutter serial=222173 13:01:41 Shutter LASER close 13:01:41 Received message from Camera: op=State serial=222175 13:01:41 GetSingleValue result=40 Value=cccccccc 13:01:41 SkyScan query 13:01:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:01:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:42 Parameters OK 13:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:42 Set A/D data flow result=40 13:01:42 Set A/D channel type result=40 13:01:42 Set A/D encoding result=40 13:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:42 Set channel filter=0.000000e+000 result=40 13:01:42 Config A/D Result=40 13:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:42 Get A/D filter: -9.255963e+061 result=40 13:01:42 Get A/D value=-858993460 result=40 13:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:42 Parameters OK 13:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:42 Set A/D data flow result=40 13:01:42 Set A/D channel type result=40 13:01:42 Set A/D encoding result=40 13:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:42 Set channel filter=0.000000e+000 result=40 13:01:42 Config A/D Result=40 13:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:42 Get A/D filter: -9.255963e+061 result=40 13:01:42 Get A/D value=-858993460 result=40 13:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:42 Aux= 13:01:42 Message to Camera, serial 222175 queued 13:02:18 Received message from Master: op=PointingHead serial=222188 13:02:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:02:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:02:19 Point started: ret=0 13:02:19 point_skyscan result=0 13:02:19 Check angles 13:02:19 SkyScan query 13:02:20 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 13:02:20 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 13:02:20 Check angles 13:02:20 SkyScan query 13:02:21 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 13:02:21 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 13:02:21 Check angles 13:02:21 SkyScan query 13:02:22 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 13:02:22 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 13:02:22 Check angles 13:02:22 SkyScan query 13:02:22 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 13:02:22 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 13:02:22 Check angles 13:02:22 SkyScan query 13:02:23 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:02:23 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:02:23 Check angles 13:02:23 SkyScan query 13:02:24 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:02:24 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:02:24 Message to Master queued w/err=0: serial=222188 error=0 13:02:29 Received message from Master: op=Filter serial=222189 13:02:29 Color wheel filter change from 0 to 0 13:02:29 FLIGetFilterPos err=0 currentPosition=0 13:02:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:29 Filter is already there-color wheel unchanged 13:02:29 Received message from Master: op=Shutter serial=222190 13:02:29 Shutter LASER close 13:02:29 Received message from Camera: op=State serial=222192 13:02:29 GetSingleValue result=40 Value=cccccccc 13:02:29 SkyScan query 13:02:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:02:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:30 Parameters OK 13:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:30 Set A/D data flow result=40 13:02:30 Set A/D channel type result=40 13:02:30 Set A/D encoding result=40 13:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:30 Set channel filter=0.000000e+000 result=40 13:02:30 Config A/D Result=40 13:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:30 Get A/D filter: -9.255963e+061 result=40 13:02:30 Get A/D value=-858993460 result=40 13:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:30 Parameters OK 13:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:30 Set A/D data flow result=40 13:02:30 Set A/D channel type result=40 13:02:30 Set A/D encoding result=40 13:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:30 Set channel filter=0.000000e+000 result=40 13:02:30 Config A/D Result=40 13:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:30 Get A/D filter: -9.255963e+061 result=40 13:02:30 Get A/D value=-858993460 result=40 13:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:30 Aux= 13:02:30 Message to Camera, serial 222192 queued 13:03:06 Received message from Master: op=PointingHead serial=222205 13:03:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:03:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:03:07 Point started: ret=0 13:03:07 point_skyscan result=0 13:03:08 Check angles 13:03:08 SkyScan query 13:03:08 SkyScan query done: ret=0 az=152.955<-10197 ze=8.595<-11427 Statuses=0009 0009 13:03:08 Msec=0 True Az=152.955 Ze=8.595 Az status=0009 Ze status=0009 13:03:08 Check angles 13:03:08 SkyScan query 13:03:09 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.78<-12852 Statuses=0009 0009 13:03:09 Msec=750 True Az=135.12 Ze=-12.78 Az status=0009 Ze status=0009 13:03:09 Check angles 13:03:09 SkyScan query 13:03:10 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.765<-14251 Statuses=0009 0009 13:03:10 Msec=1500 True Az=117.57 Ze=-33.765 Az status=0009 Ze status=0009 13:03:10 Check angles 13:03:10 SkyScan query 13:03:10 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.555<-15437 Statuses=0009 0009 13:03:10 Msec=2250 True Az=100.2 Ze=-51.555 Az status=0009 Ze status=0009 13:03:11 Check angles 13:03:11 SkyScan query 13:03:11 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:03:11 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:03:11 Check angles 13:03:11 SkyScan query 13:03:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:03:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:03:12 Message to Master queued w/err=0: serial=222205 error=0 13:03:17 Received message from Master: op=Filter serial=222206 13:03:17 Color wheel filter change from 0 to 0 13:03:17 FLIGetFilterPos err=0 currentPosition=0 13:03:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:17 Filter is already there-color wheel unchanged 13:03:17 Received message from Master: op=Shutter serial=222207 13:03:17 Shutter LASER close 13:03:17 Received message from Camera: op=State serial=222209 13:03:17 GetSingleValue result=40 Value=cccccccc 13:03:17 SkyScan query 13:03:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:18 Parameters OK 13:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:18 Set A/D data flow result=40 13:03:18 Set A/D channel type result=40 13:03:18 Set A/D encoding result=40 13:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:18 Set channel filter=0.000000e+000 result=40 13:03:18 Config A/D Result=40 13:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:18 Get A/D filter: -9.255963e+061 result=40 13:03:18 Get A/D value=-858993460 result=40 13:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:18 Parameters OK 13:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:18 Set A/D data flow result=40 13:03:18 Set A/D channel type result=40 13:03:18 Set A/D encoding result=40 13:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:18 Set channel filter=0.000000e+000 result=40 13:03:18 Config A/D Result=40 13:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:18 Get A/D filter: -9.255963e+061 result=40 13:03:18 Get A/D value=-858993460 result=40 13:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:18 Aux= 13:03:18 Message to Camera, serial 222209 queued 13:03:55 Received message from Master: op=PointingHead serial=222222 13:03:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:03:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:03:55 Point started: ret=0 13:03:55 point_skyscan result=0 13:03:56 Check angles 13:03:56 SkyScan query 13:03:56 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.495<-17433 Statuses=0009 0009 13:03:56 Msec=0 True Az=109.14 Ze=-81.495 Az status=0009 Ze status=0009 13:03:56 Check angles 13:03:56 SkyScan query 13:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.45<-18830 Statuses=0008 0009 13:03:57 Msec=750 True Az=112.995 Ze=-102.45 Az status=0008 Ze status=0009 13:03:57 Check angles 13:03:57 SkyScan query 13:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 13:03:58 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 13:03:58 Check angles 13:03:58 SkyScan query 13:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 13:03:58 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 13:03:59 Check angles 13:03:59 SkyScan query 13:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.3<-23020 Statuses=0008 0009 13:03:59 Msec=3000 True Az=112.995 Ze=-165.3 Az status=0008 Ze status=0009 13:03:59 Check angles 13:03:59 SkyScan query 13:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:04:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:04:00 Message to Master queued w/err=0: serial=222222 error=0 13:04:05 Received message from Master: op=Filter serial=222223 13:04:05 Color wheel filter change from 0 to 0 13:04:05 FLIGetFilterPos err=0 currentPosition=0 13:04:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:05 Filter is already there-color wheel unchanged 13:04:05 Received message from Master: op=Shutter serial=222224 13:04:05 Shutter LASER open 13:04:05 Received message from Camera: op=State serial=222226 13:04:05 GetSingleValue result=40 Value=cccccccc 13:04:05 SkyScan query 13:04:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:04:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:06 Parameters OK 13:04:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:06 Set A/D data flow result=40 13:04:06 Set A/D channel type result=40 13:04:06 Set A/D encoding result=40 13:04:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:06 Set channel filter=0.000000e+000 result=40 13:04:06 Config A/D Result=40 13:04:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:06 Get A/D filter: -9.255963e+061 result=40 13:04:06 Get A/D value=-858993460 result=40 13:04:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:06 Parameters OK 13:04:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:06 Set A/D data flow result=40 13:04:06 Set A/D channel type result=40 13:04:06 Set A/D encoding result=40 13:04:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:06 Set channel filter=0.000000e+000 result=40 13:04:06 Config A/D Result=40 13:04:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:06 Get A/D filter: -9.255963e+061 result=40 13:04:06 Get A/D value=-858993460 result=40 13:04:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:06 Aux= 13:04:06 Message to Camera, serial 222226 queued 13:04:13 Received message from Master: op=Shutter serial=222235 13:04:13 Shutter LASER close 13:04:14 Received message from Master: op=PointingHead serial=222239 13:04:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:04:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:04:14 Point started: ret=0 13:04:14 point_skyscan result=0 13:04:15 Check angles 13:04:15 SkyScan query 13:04:16 SkyScan query done: ret=0 az=89.88<-5992 ze=157.2<-1520 Statuses=0009 0009 13:04:16 Msec=0 True Az=89.88 Ze=157.2 Az status=0009 Ze status=0009 13:04:16 Check angles 13:04:16 SkyScan query 13:04:16 SkyScan query done: ret=0 az=72.3<-4820 ze=136.26<-2916 Statuses=0009 0009 13:04:16 Msec=750 True Az=72.3 Ze=136.26 Az status=0009 Ze status=0009 13:04:16 Check angles 13:04:16 SkyScan query 13:04:17 SkyScan query done: ret=0 az=55.11<-3674 ze=115.335<-4311 Statuses=0009 0009 13:04:17 Msec=1500 True Az=55.11 Ze=115.335 Az status=0009 Ze status=0009 13:04:17 Check angles 13:04:17 SkyScan query 13:04:18 SkyScan query done: ret=0 az=41.01<-2734 ze=94.335<-5711 Statuses=0009 0009 13:04:18 Msec=2250 True Az=41.01 Ze=94.335 Az status=0009 Ze status=0009 13:04:18 Check angles 13:04:18 SkyScan query 13:04:19 SkyScan query done: ret=0 az=40.995<-2733 ze=73.395<-7107 Statuses=0008 0009 13:04:19 Msec=3000 True Az=40.995 Ze=73.395 Az status=0008 Ze status=0009 13:04:19 Check angles 13:04:19 SkyScan query 13:04:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.815<-8479 Statuses=0008 0009 13:04:19 Msec=3750 True Az=40.995 Ze=52.815 Az status=0008 Ze status=0009 13:04:19 Check angles 13:04:19 SkyScan query 13:04:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:04:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:04:20 Message to Master queued w/err=0: serial=222239 error=0 13:04:25 Received message from Master: op=Filter serial=222240 13:04:25 Color wheel filter change from 0 to 0 13:04:25 FLIGetFilterPos err=0 currentPosition=0 13:04:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:25 Filter is already there-color wheel unchanged 13:04:25 Received message from Master: op=Shutter serial=222241 13:04:25 Shutter LASER close 13:04:25 Received message from Camera: op=State serial=222243 13:04:25 GetSingleValue result=40 Value=cccccccc 13:04:25 SkyScan query 13:04:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:04:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:26 Parameters OK 13:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:26 Set A/D data flow result=40 13:04:26 Set A/D channel type result=40 13:04:26 Set A/D encoding result=40 13:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:26 Set channel filter=0.000000e+000 result=40 13:04:26 Config A/D Result=40 13:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:26 Get A/D filter: -9.255963e+061 result=40 13:04:26 Get A/D value=-858993460 result=40 13:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:26 Parameters OK 13:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:26 Set A/D data flow result=40 13:04:26 Set A/D channel type result=40 13:04:26 Set A/D encoding result=40 13:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:26 Set channel filter=0.000000e+000 result=40 13:04:26 Config A/D Result=40 13:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:26 Get A/D filter: -9.255963e+061 result=40 13:04:26 Get A/D value=-858993460 result=40 13:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:26 Aux= 13:04:26 Message to Camera, serial 222243 queued 13:05:03 Received message from Master: op=PointingHead serial=222256 13:05:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:05:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:05:03 Point started: ret=0 13:05:03 point_skyscan result=0 13:05:04 Check angles 13:05:04 SkyScan query 13:05:04 SkyScan query done: ret=0 az=64.035<-4269 ze=66.54<-7564 Statuses=0009 0008 13:05:04 Msec=0 True Az=64.035 Ze=66.54 Az status=0009 Ze status=0008 13:05:05 Check angles 13:05:05 SkyScan query 13:05:05 SkyScan query done: ret=0 az=81.54<-5436 ze=66.51<-7566 Statuses=0009 0008 13:05:05 Msec=750 True Az=81.54 Ze=66.51 Az status=0009 Ze status=0008 13:05:05 Check angles 13:05:05 SkyScan query 13:05:06 SkyScan query done: ret=0 az=99.075<-6605 ze=66.495<-7567 Statuses=0009 0008 13:05:06 Msec=1500 True Az=99.075 Ze=66.495 Az status=0009 Ze status=0008 13:05:06 Check angles 13:05:06 SkyScan query 13:05:07 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 13:05:07 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 13:05:07 Check angles 13:05:07 SkyScan query 13:05:07 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 13:05:07 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 13:05:08 Check angles 13:05:08 SkyScan query 13:05:08 SkyScan query done: ret=0 az=151.665<-10111 ze=66.495<-7567 Statuses=0009 0008 13:05:08 Msec=3750 True Az=151.665 Ze=66.495 Az status=0009 Ze status=0008 13:05:08 Check angles 13:05:08 SkyScan query 13:05:09 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:05:09 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:05:09 Message to Master queued w/err=0: serial=222256 error=0 13:05:14 Received message from Master: op=Filter serial=222257 13:05:14 Color wheel filter change from 0 to 0 13:05:14 FLIGetFilterPos err=0 currentPosition=0 13:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:14 Filter is already there-color wheel unchanged 13:05:14 Received message from Master: op=Shutter serial=222258 13:05:14 Shutter LASER close 13:05:14 Received message from Camera: op=State serial=222260 13:05:14 GetSingleValue result=40 Value=cccccccc 13:05:14 SkyScan query 13:05:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:15 Parameters OK 13:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:15 Set A/D data flow result=40 13:05:15 Set A/D channel type result=40 13:05:15 Set A/D encoding result=40 13:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:15 Set channel filter=0.000000e+000 result=40 13:05:15 Config A/D Result=40 13:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:15 Get A/D filter: -9.255963e+061 result=40 13:05:15 Get A/D value=-858993460 result=40 13:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:15 Parameters OK 13:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:15 Set A/D data flow result=40 13:05:15 Set A/D channel type result=40 13:05:15 Set A/D encoding result=40 13:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:15 Set channel filter=0.000000e+000 result=40 13:05:15 Config A/D Result=40 13:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:15 Get A/D filter: -9.255963e+061 result=40 13:05:15 Get A/D value=-858993460 result=40 [UTC 2018-12-17 13:05:15] 13:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:15 Aux= 13:05:15 Message to Camera, serial 222260 queued 13:05:52 Received message from Master: op=PointingHead serial=222273 13:05:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:05:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:05:52 Point started: ret=0 13:05:52 point_skyscan result=0 13:05:53 Check angles 13:05:53 SkyScan query 13:05:53 SkyScan query done: ret=0 az=134.94<-8996 ze=36.585<-9561 Statuses=0009 0009 13:05:53 Msec=0 True Az=134.94 Ze=36.585 Az status=0009 Ze status=0009 13:05:53 Check angles 13:05:53 SkyScan query 13:05:54 SkyScan query done: ret=0 az=117.48<-7832 ze=15.645<-10957 Statuses=0009 0009 13:05:54 Msec=750 True Az=117.48 Ze=15.645 Az status=0009 Ze status=0009 13:05:54 Check angles 13:05:54 SkyScan query 13:05:55 SkyScan query done: ret=0 az=100.065<-6671 ze=-5.34<-12356 Statuses=0009 0009 13:05:55 Msec=1500 True Az=100.065 Ze=-5.34 Az status=0009 Ze status=0009 13:05:55 Check angles 13:05:55 SkyScan query 13:05:56 SkyScan query done: ret=0 az=82.56<-5504 ze=-26.28<-13752 Statuses=0009 0009 13:05:56 Msec=2250 True Az=82.56 Ze=-26.28 Az status=0009 Ze status=0009 13:05:56 Check angles 13:05:56 SkyScan query 13:05:56 SkyScan query done: ret=0 az=65.04<-4336 ze=-38.565<-14571 Statuses=0009 0008 13:05:56 Msec=3000 True Az=65.04 Ze=-38.565 Az status=0009 Ze status=0008 13:05:56 Check angles 13:05:56 SkyScan query 13:05:57 SkyScan query done: ret=0 az=47.58<-3172 ze=-38.535<-14569 Statuses=0009 0008 13:05:57 Msec=3750 True Az=47.58 Ze=-38.535 Az status=0009 Ze status=0008 13:05:57 Check angles 13:05:57 SkyScan query 13:05:58 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 13:05:58 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 13:05:58 Message to Master queued w/err=0: serial=222273 error=0 13:06:03 Received message from Master: op=Filter serial=222274 13:06:03 Color wheel filter change from 0 to 0 13:06:03 FLIGetFilterPos err=0 currentPosition=0 13:06:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:03 Filter is already there-color wheel unchanged 13:06:03 Received message from Master: op=Shutter serial=222275 13:06:03 Shutter LASER close 13:06:03 Received message from Camera: op=State serial=222277 13:06:03 GetSingleValue result=40 Value=cccccccc 13:06:03 SkyScan query 13:06:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:06:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:04 Parameters OK 13:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:04 Set A/D data flow result=40 13:06:04 Set A/D channel type result=40 13:06:04 Set A/D encoding result=40 13:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:04 Set channel filter=0.000000e+000 result=40 13:06:04 Config A/D Result=40 13:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:04 Get A/D filter: -9.255963e+061 result=40 13:06:04 Get A/D value=-858993460 result=40 13:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:04 Parameters OK 13:06:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:04 Set A/D data flow result=40 13:06:04 Set A/D channel type result=40 13:06:04 Set A/D encoding result=40 13:06:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:04 Set channel filter=0.000000e+000 result=40 13:06:04 Config A/D Result=40 13:06:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:04 Get A/D filter: -9.255963e+061 result=40 13:06:04 Get A/D value=-858993460 result=40 13:06:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:04 Aux= 13:06:04 Message to Camera, serial 222277 queued 13:06:40 Received message from Master: op=PointingHead serial=222290 13:06:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:06:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:06:41 Point started: ret=0 13:06:41 point_skyscan result=0 13:06:42 Check angles 13:06:42 SkyScan query 13:06:42 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.28<-16552 Statuses=0009 0009 13:06:42 Msec=0 True Az=63.855 Ze=-68.28 Az status=0009 Ze status=0009 13:06:42 Check angles 13:06:42 SkyScan query 13:06:43 SkyScan query done: ret=0 az=81.405<-5427 ze=-89.205<-17947 Statuses=0009 0009 13:06:43 Msec=750 True Az=81.405 Ze=-89.205 Az status=0009 Ze status=0009 13:06:43 Check angles 13:06:43 SkyScan query 13:06:44 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.115<-19341 Statuses=0009 0009 13:06:44 Msec=1500 True Az=98.82 Ze=-110.115 Az status=0009 Ze status=0009 13:06:44 Check angles 13:06:44 SkyScan query 13:06:44 SkyScan query done: ret=0 az=116.22<-7748 ze=-131.085<-20739 Statuses=0009 0009 13:06:44 Msec=2250 True Az=116.22 Ze=-131.085 Az status=0009 Ze status=0009 13:06:45 Check angles 13:06:45 SkyScan query 13:06:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0009 0008 13:06:45 Msec=3000 True Az=131.01 Ze=-141.525 Az status=0009 Ze status=0008 13:06:45 Check angles 13:06:45 SkyScan query 13:06:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:06:46 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:06:46 Message to Master queued w/err=0: serial=222290 error=0 13:06:51 Received message from Master: op=Filter serial=222291 13:06:51 Color wheel filter change from 0 to 0 13:06:51 FLIGetFilterPos err=0 currentPosition=0 13:06:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:51 Filter is already there-color wheel unchanged 13:06:51 Received message from Master: op=Shutter serial=222292 13:06:51 Shutter LASER close 13:06:51 Received message from Camera: op=State serial=222294 13:06:51 GetSingleValue result=40 Value=cccccccc 13:06:51 SkyScan query 13:06:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:06:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:52 Parameters OK 13:06:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:52 Set A/D data flow result=40 13:06:52 Set A/D channel type result=40 13:06:52 Set A/D encoding result=40 13:06:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:52 Set channel filter=0.000000e+000 result=40 13:06:52 Config A/D Result=40 13:06:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:52 Get A/D filter: -9.255963e+061 result=40 13:06:52 Get A/D value=-858993460 result=40 13:06:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:52 Parameters OK 13:06:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:52 Set A/D data flow result=40 13:06:52 Set A/D channel type result=40 13:06:52 Set A/D encoding result=40 13:06:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:52 Set channel filter=0.000000e+000 result=40 13:06:52 Config A/D Result=40 13:06:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:52 Get A/D filter: -9.255963e+061 result=40 13:06:52 Get A/D value=-858993460 result=40 13:06:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:52 Aux= 13:06:52 Message to Camera, serial 222294 queued 13:07:28 Received message from Master: op=PointingHead serial=222307 13:07:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:07:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:07:29 Point started: ret=0 13:07:29 point_skyscan result=0 13:07:30 Check angles 13:07:30 SkyScan query 13:07:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 13:07:30 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 13:07:30 Check angles 13:07:30 SkyScan query 13:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:07:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:07:31 Message to Master queued w/err=0: serial=222307 error=0 13:07:36 Received message from Master: op=Filter serial=222308 13:07:36 Color wheel filter change from 0 to 0 13:07:36 FLIGetFilterPos err=0 currentPosition=0 13:07:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:36 Filter is already there-color wheel unchanged 13:07:36 Received message from Master: op=Shutter serial=222309 13:07:36 Shutter LASER open 13:07:36 Received message from Camera: op=State serial=222311 13:07:36 GetSingleValue result=40 Value=cccccccc 13:07:36 SkyScan query 13:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:07:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:37 Parameters OK 13:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:37 Set A/D data flow result=40 13:07:37 Set A/D channel type result=40 13:07:37 Set A/D encoding result=40 13:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:37 Set channel filter=0.000000e+000 result=40 13:07:37 Config A/D Result=40 13:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:37 Get A/D filter: -9.255963e+061 result=40 13:07:37 Get A/D value=-858993460 result=40 13:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:37 Parameters OK 13:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:37 Set A/D data flow result=40 13:07:37 Set A/D channel type result=40 13:07:37 Set A/D encoding result=40 13:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:37 Set channel filter=0.000000e+000 result=40 13:07:37 Config A/D Result=40 13:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:37 Get A/D filter: -9.255963e+061 result=40 13:07:37 Get A/D value=-858993460 result=40 13:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:37 Aux= 13:07:37 Message to Camera, serial 222311 queued 13:07:45 Received message from Master: op=Shutter serial=222321 13:07:45 Shutter LASER close 13:07:46 Received message from Master: op=PointingHead serial=222325 13:07:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:07:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:07:46 Point started: ret=0 13:07:46 point_skyscan result=0 13:07:47 Check angles 13:07:47 SkyScan query 13:07:48 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.28<-21552 Statuses=0009 0009 13:07:48 Msec=0 True Az=135.885 Ze=-143.28 Az status=0009 Ze status=0009 13:07:48 Check angles 13:07:48 SkyScan query 13:07:48 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.845<-20123 Statuses=0009 0009 13:07:48 Msec=750 True Az=153.75 Ze=-121.845 Az status=0009 Ze status=0009 13:07:49 Check angles 13:07:49 SkyScan query 13:07:49 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.41<-18694 Statuses=0009 0009 13:07:49 Msec=1500 True Az=171.63 Ze=-100.41 Az status=0009 Ze status=0009 13:07:49 Check angles 13:07:49 SkyScan query 13:07:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.515<-17301 Statuses=0008 0009 13:07:50 Msec=2250 True Az=175.995 Ze=-79.515 Az status=0008 Ze status=0009 13:07:50 Check angles 13:07:50 SkyScan query 13:07:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.515<-15901 Statuses=0008 0009 13:07:51 Msec=3000 True Az=176.01 Ze=-58.515 Az status=0008 Ze status=0009 13:07:51 Check angles 13:07:51 SkyScan query 13:07:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:07:51 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:07:51 Message to Master queued w/err=0: serial=222325 error=0 13:07:56 Received message from Master: op=Filter serial=222326 13:07:56 Color wheel filter change from 0 to 0 13:07:56 FLIGetFilterPos err=0 currentPosition=0 13:07:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:56 Filter is already there-color wheel unchanged 13:07:57 Received message from Master: op=Shutter serial=222327 13:07:57 Shutter LASER close 13:07:57 Received message from Camera: op=State serial=222329 13:07:57 GetSingleValue result=40 Value=cccccccc 13:07:57 SkyScan query 13:07:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:07:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:57 Parameters OK 13:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:57 Set A/D data flow result=40 13:07:57 Set A/D channel type result=40 13:07:57 Set A/D encoding result=40 13:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:57 Set channel filter=0.000000e+000 result=40 13:07:57 Config A/D Result=40 13:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:57 Get A/D filter: -9.255963e+061 result=40 13:07:57 Get A/D value=-858993460 result=40 13:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:57 Parameters OK 13:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:57 Set A/D data flow result=40 13:07:57 Set A/D channel type result=40 13:07:57 Set A/D encoding result=40 13:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:57 Set channel filter=0.000000e+000 result=40 13:07:57 Config A/D Result=40 13:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:57 Get A/D filter: -9.255963e+061 result=40 13:07:57 Get A/D value=-858993460 result=40 13:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:57 Aux= 13:07:57 Message to Camera, serial 222329 queued 13:08:34 Received message from Master: op=PointingHead serial=222342 13:08:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:08:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:08:34 Point started: ret=0 13:08:34 point_skyscan result=0 13:08:35 Check angles 13:08:35 SkyScan query 13:08:36 SkyScan query done: ret=0 az=153.06<-10204 ze=-21.87<-13458 Statuses=0009 0009 13:08:36 Msec=0 True Az=153.06 Ze=-21.87 Az status=0009 Ze status=0009 13:08:36 Check angles 13:08:36 SkyScan query 13:08:37 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.855<-12057 Statuses=0009 0009 13:08:37 Msec=750 True Az=135.66 Ze=-0.855 Az status=0009 Ze status=0009 13:08:37 Check angles 13:08:37 SkyScan query 13:08:37 SkyScan query done: ret=0 az=117.765<-7851 ze=20.49<-10634 Statuses=0009 0009 13:08:37 Msec=1500 True Az=117.765 Ze=20.49 Az status=0009 Ze status=0009 13:08:37 Check angles 13:08:37 SkyScan query 13:08:38 SkyScan query done: ret=0 az=100.41<-6694 ze=41.505<-9233 Statuses=0009 0009 13:08:38 Msec=2250 True Az=100.41 Ze=41.505 Az status=0009 Ze status=0009 13:08:38 Check angles 13:08:38 SkyScan query 13:08:39 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 13:08:39 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 13:08:39 Check angles 13:08:39 SkyScan query 13:08:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:08:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:08:40 Message to Master queued w/err=0: serial=222342 error=0 13:08:45 Received message from Master: op=Filter serial=222343 13:08:45 Color wheel filter change from 0 to 0 13:08:45 FLIGetFilterPos err=0 currentPosition=0 13:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:45 Filter is already there-color wheel unchanged 13:08:45 Received message from Master: op=Shutter serial=222344 13:08:45 Shutter LASER close 13:08:45 Received message from Camera: op=State serial=222346 13:08:45 GetSingleValue result=40 Value=cccccccc 13:08:45 SkyScan query 13:08:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:08:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:45 Parameters OK 13:08:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:45 Set A/D data flow result=40 13:08:45 Set A/D channel type result=40 13:08:45 Set A/D encoding result=40 13:08:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:45 Set channel filter=0.000000e+000 result=40 13:08:45 Config A/D Result=40 13:08:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:45 Get A/D filter: -9.255963e+061 result=40 13:08:45 Get A/D value=-858993460 result=40 13:08:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:45 Parameters OK 13:08:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:45 Set A/D data flow result=40 13:08:45 Set A/D channel type result=40 13:08:45 Set A/D encoding result=40 13:08:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:45 Set channel filter=0.000000e+000 result=40 13:08:45 Config A/D Result=40 13:08:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:45 Get A/D filter: -9.255963e+061 result=40 13:08:45 Get A/D value=-858993460 result=40 13:08:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:45 Aux= 13:08:45 Message to Camera, serial 222346 queued 13:09:22 Received message from Master: op=PointingHead serial=222359 13:09:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:09:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:09:23 Point started: ret=0 13:09:23 point_skyscan result=0 13:09:23 Check angles 13:09:23 SkyScan query 13:09:24 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 13:09:24 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 13:09:24 Check angles 13:09:24 SkyScan query 13:09:25 SkyScan query done: ret=0 az=126.285<-8419 ze=38.505<-9433 Statuses=0009 0008 13:09:25 Msec=750 True Az=126.285 Ze=38.505 Az status=0009 Ze status=0008 13:09:25 Check angles 13:09:25 SkyScan query 13:09:25 SkyScan query done: ret=0 az=144.09<-9606 ze=38.505<-9433 Statuses=0009 0008 13:09:25 Msec=1500 True Az=144.09 Ze=38.505 Az status=0009 Ze status=0008 13:09:26 Check angles 13:09:26 SkyScan query 13:09:26 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 13:09:26 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 13:09:26 Check angles 13:09:26 SkyScan query 13:09:27 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:09:27 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:09:27 Check angles 13:09:27 SkyScan query 13:09:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:09:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:09:28 Message to Master queued w/err=0: serial=222359 error=0 13:09:33 Received message from Master: op=Filter serial=222360 13:09:33 Color wheel filter change from 0 to 0 13:09:33 FLIGetFilterPos err=0 currentPosition=0 13:09:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:33 Filter is already there-color wheel unchanged 13:09:33 Received message from Master: op=Shutter serial=222361 13:09:33 Shutter LASER close 13:09:33 Received message from Camera: op=State serial=222363 13:09:33 GetSingleValue result=40 Value=cccccccc 13:09:33 SkyScan query 13:09:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:09:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:33 Parameters OK 13:09:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:33 Set A/D data flow result=40 13:09:33 Set A/D channel type result=40 13:09:33 Set A/D encoding result=40 13:09:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:33 Set channel filter=0.000000e+000 result=40 13:09:33 Config A/D Result=40 13:09:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:33 Get A/D filter: -9.255963e+061 result=40 13:09:33 Get A/D value=-858993460 result=40 13:09:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:33 Parameters OK 13:09:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:33 Set A/D data flow result=40 13:09:33 Set A/D channel type result=40 13:09:33 Set A/D encoding result=40 13:09:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:33 Set channel filter=0.000000e+000 result=40 13:09:33 Config A/D Result=40 13:09:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:33 Get A/D filter: -9.255963e+061 result=40 13:09:33 Get A/D value=-858993460 result=40 13:09:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:33 Aux= 13:09:33 Message to Camera, serial 222363 queued 13:10:10 Received message from Master: op=PointingHead serial=222376 13:10:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:10:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:10:11 Point started: ret=0 13:10:11 point_skyscan result=0 13:10:11 Check angles 13:10:11 SkyScan query 13:10:12 SkyScan query done: ret=0 az=152.76<-10184 ze=8.415<-11439 Statuses=0009 0009 13:10:12 Msec=0 True Az=152.76 Ze=8.415 Az status=0009 Ze status=0009 13:10:12 Check angles 13:10:12 SkyScan query 13:10:13 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.51<-12834 Statuses=0009 0009 13:10:13 Msec=750 True Az=135.36 Ze=-12.51 Az status=0009 Ze status=0009 13:10:13 Check angles 13:10:13 SkyScan query 13:10:13 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.465<-14231 Statuses=0009 0009 13:10:13 Msec=1500 True Az=117.78 Ze=-33.465 Az status=0009 Ze status=0009 13:10:14 Check angles 13:10:14 SkyScan query 13:10:14 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.555<-15437 Statuses=0009 0009 13:10:14 Msec=2250 True Az=100.485 Ze=-51.555 Az status=0009 Ze status=0009 13:10:14 Check angles 13:10:14 SkyScan query 13:10:15 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:10:15 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:10:15 Check angles 13:10:15 SkyScan query 13:10:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:10:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:10:16 Message to Master queued w/err=0: serial=222376 error=0 13:10:21 Received message from Master: op=Filter serial=222377 13:10:21 Color wheel filter change from 0 to 0 13:10:21 FLIGetFilterPos err=0 currentPosition=0 13:10:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:21 Filter is already there-color wheel unchanged 13:10:21 Received message from Master: op=Shutter serial=222378 13:10:21 Shutter LASER close 13:10:21 Received message from Camera: op=State serial=222380 13:10:21 GetSingleValue result=40 Value=cccccccc 13:10:21 SkyScan query 13:10:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:10:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:21 Parameters OK 13:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:21 Set A/D data flow result=40 13:10:21 Set A/D channel type result=40 13:10:21 Set A/D encoding result=40 13:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:21 Set channel filter=0.000000e+000 result=40 13:10:21 Config A/D Result=40 13:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:21 Get A/D filter: -9.255963e+061 result=40 13:10:21 Get A/D value=-858993460 result=40 13:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:21 Parameters OK 13:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:21 Set A/D data flow result=40 13:10:21 Set A/D channel type result=40 13:10:21 Set A/D encoding result=40 13:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:21 Set channel filter=0.000000e+000 result=40 13:10:21 Config A/D Result=40 13:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:21 Get A/D filter: -9.255963e+061 result=40 13:10:21 Get A/D value=-858993460 result=40 13:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:21 Aux= 13:10:21 Message to Camera, serial 222380 queued 13:10:58 Received message from Master: op=PointingHead serial=222393 13:10:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:10:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:10:59 Point started: ret=0 13:10:59 point_skyscan result=0 13:10:59 Check angles 13:10:59 SkyScan query 13:11:00 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.33<-17422 Statuses=0009 0009 13:11:00 Msec=0 True Az=109.02 Ze=-81.33 Az status=0009 Ze status=0009 13:11:00 Check angles 13:11:00 SkyScan query 13:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 13:11:01 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 13:11:01 Check angles 13:11:01 SkyScan query 13:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 13:11:01 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 13:11:02 Check angles 13:11:02 SkyScan query 13:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.615<-21641 Statuses=0008 0009 13:11:02 Msec=2250 True Az=112.995 Ze=-144.615 Az status=0008 Ze status=0009 13:11:02 Check angles 13:11:02 SkyScan query 13:11:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.57<-23038 Statuses=0008 0009 13:11:03 Msec=3000 True Az=112.995 Ze=-165.57 Az status=0008 Ze status=0009 13:11:03 Check angles 13:11:03 SkyScan query 13:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:11:04 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:11:04 Message to Master queued w/err=0: serial=222393 error=0 13:11:09 Received message from Master: op=Filter serial=222394 13:11:09 Color wheel filter change from 0 to 0 13:11:09 FLIGetFilterPos err=0 currentPosition=0 13:11:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:09 Filter is already there-color wheel unchanged 13:11:09 Received message from Master: op=Shutter serial=222395 13:11:09 Shutter LASER open 13:11:09 Received message from Camera: op=State serial=222397 13:11:09 GetSingleValue result=40 Value=cccccccc 13:11:09 SkyScan query 13:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:10 Parameters OK 13:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:10 Set A/D data flow result=40 13:11:10 Set A/D channel type result=40 13:11:10 Set A/D encoding result=40 13:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:10 Set channel filter=0.000000e+000 result=40 13:11:10 Config A/D Result=40 13:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:10 Get A/D filter: -9.255963e+061 result=40 13:11:10 Get A/D value=-858993460 result=40 13:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:10 Parameters OK 13:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:10 Set A/D data flow result=40 13:11:10 Set A/D channel type result=40 13:11:10 Set A/D encoding result=40 13:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:10 Set channel filter=0.000000e+000 result=40 13:11:10 Config A/D Result=40 13:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:10 Get A/D filter: -9.255963e+061 result=40 13:11:10 Get A/D value=-858993460 result=40 13:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:10 Aux= 13:11:10 Message to Camera, serial 222397 queued 13:11:17 Received message from Master: op=Shutter serial=222406 13:11:17 Shutter LASER close 13:11:18 Received message from Master: op=PointingHead serial=222410 13:11:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:11:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:11:18 Point started: ret=0 13:11:18 point_skyscan result=0 13:11:19 Check angles 13:11:19 SkyScan query 13:11:19 SkyScan query done: ret=0 az=90.105<-6007 ze=157.515<-1499 Statuses=0009 0009 13:11:19 Msec=0 True Az=90.105 Ze=157.515 Az status=0009 Ze status=0009 13:11:19 Check angles 13:11:19 SkyScan query 13:11:20 SkyScan query done: ret=0 az=72.255<-4817 ze=136.11<-2926 Statuses=0009 0009 13:11:20 Msec=750 True Az=72.255 Ze=136.11 Az status=0009 Ze status=0009 13:11:20 Check angles 13:11:20 SkyScan query 13:11:21 SkyScan query done: ret=0 az=54.93<-3662 ze=115.17<-4322 Statuses=0009 0009 13:11:21 Msec=1500 True Az=54.93 Ze=115.17 Az status=0009 Ze status=0009 13:11:21 Check angles 13:11:21 SkyScan query 13:11:22 SkyScan query done: ret=0 az=40.995<-2733 ze=94.14<-5724 Statuses=0009 0009 13:11:22 Msec=2250 True Az=40.995 Ze=94.14 Az status=0009 Ze status=0009 13:11:22 Check angles 13:11:22 SkyScan query 13:11:22 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 13:11:22 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 13:11:22 Check angles 13:11:22 SkyScan query 13:11:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 13:11:23 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 13:11:23 Check angles 13:11:23 SkyScan query 13:11:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:11:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:11:24 Message to Master queued w/err=0: serial=222410 error=0 13:11:29 Received message from Master: op=Filter serial=222411 13:11:29 Color wheel filter change from 0 to 0 13:11:29 FLIGetFilterPos err=0 currentPosition=0 13:11:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:29 Filter is already there-color wheel unchanged 13:11:29 Received message from Master: op=Shutter serial=222412 13:11:29 Shutter LASER close 13:11:29 Received message from Camera: op=State serial=222414 13:11:29 GetSingleValue result=40 Value=cccccccc 13:11:29 SkyScan query 13:11:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:11:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:30 Parameters OK 13:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:30 Set A/D data flow result=40 13:11:30 Set A/D channel type result=40 13:11:30 Set A/D encoding result=40 13:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:30 Set channel filter=0.000000e+000 result=40 13:11:30 Config A/D Result=40 13:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:30 Get A/D filter: -9.255963e+061 result=40 13:11:30 Get A/D value=-858993460 result=40 13:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:30 Parameters OK 13:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:30 Set A/D data flow result=40 13:11:30 Set A/D channel type result=40 13:11:30 Set A/D encoding result=40 13:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:30 Set channel filter=0.000000e+000 result=40 13:11:30 Config A/D Result=40 13:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:30 Get A/D filter: -9.255963e+061 result=40 13:11:30 Get A/D value=-858993460 result=40 13:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:30 Aux= 13:11:30 Message to Camera, serial 222414 queued 13:12:07 Received message from Master: op=PointingHead serial=222427 13:12:07 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:12:07 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:12:07 Point started: ret=0 13:12:07 point_skyscan result=0 13:12:08 Check angles 13:12:08 SkyScan query 13:12:08 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 13:12:08 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 13:12:08 Check angles 13:12:08 SkyScan query 13:12:09 SkyScan query done: ret=0 az=81.135<-5409 ze=66.51<-7566 Statuses=0009 0008 13:12:09 Msec=750 True Az=81.135 Ze=66.51 Az status=0009 Ze status=0008 13:12:09 Check angles 13:12:09 SkyScan query 13:12:10 SkyScan query done: ret=0 az=99.045<-6603 ze=66.495<-7567 Statuses=0009 0008 13:12:10 Msec=1500 True Az=99.045 Ze=66.495 Az status=0009 Ze status=0008 13:12:10 Check angles 13:12:10 SkyScan query 13:12:10 SkyScan query done: ret=0 az=116.595<-7773 ze=66.495<-7567 Statuses=0009 0008 13:12:10 Msec=2250 True Az=116.595 Ze=66.495 Az status=0009 Ze status=0008 13:12:11 Check angles 13:12:11 SkyScan query 13:12:11 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 13:12:11 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 13:12:11 Check angles 13:12:11 SkyScan query 13:12:12 SkyScan query done: ret=0 az=151.68<-10112 ze=66.495<-7567 Statuses=0009 0008 13:12:12 Msec=3750 True Az=151.68 Ze=66.495 Az status=0009 Ze status=0008 13:12:12 Check angles 13:12:12 SkyScan query 13:12:13 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:12:13 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:12:13 Message to Master queued w/err=0: serial=222427 error=0 13:12:18 Received message from Master: op=Filter serial=222428 13:12:18 Color wheel filter change from 0 to 0 13:12:18 FLIGetFilterPos err=0 currentPosition=0 13:12:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:18 Filter is already there-color wheel unchanged 13:12:18 Received message from Master: op=Shutter serial=222429 13:12:18 Shutter LASER close 13:12:18 Received message from Camera: op=State serial=222431 13:12:18 GetSingleValue result=40 Value=cccccccc 13:12:18 SkyScan query 13:12:19 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:12:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:19 Parameters OK 13:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:19 Set A/D data flow result=40 13:12:19 Set A/D channel type result=40 13:12:19 Set A/D encoding result=40 13:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:19 Set channel filter=0.000000e+000 result=40 13:12:19 Config A/D Result=40 13:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:19 Get A/D filter: -9.255963e+061 result=40 13:12:19 Get A/D value=-858993460 result=40 13:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:19 Parameters OK 13:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:19 Set A/D data flow result=40 13:12:19 Set A/D channel type result=40 13:12:19 Set A/D encoding result=40 13:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:19 Set channel filter=0.000000e+000 result=40 13:12:19 Config A/D Result=40 13:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:19 Get A/D filter: -9.255963e+061 result=40 13:12:19 Get A/D value=-858993460 result=40 13:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:19 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:19 Aux= 13:12:19 Message to Camera, serial 222431 queued 13:12:55 Received message from Master: op=PointingHead serial=222444 13:12:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:12:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:12:56 Point started: ret=0 13:12:56 point_skyscan result=0 13:12:57 Check angles 13:12:57 SkyScan query 13:12:57 SkyScan query done: ret=0 az=134.565<-8971 ze=36.345<-9577 Statuses=0009 0009 13:12:57 Msec=0 True Az=134.565 Ze=36.345 Az status=0009 Ze status=0009 13:12:57 Check angles 13:12:57 SkyScan query 13:12:58 SkyScan query done: ret=0 az=116.805<-7787 ze=14.895<-11007 Statuses=0009 0009 13:12:58 Msec=750 True Az=116.805 Ze=14.895 Az status=0009 Ze status=0009 13:12:58 Check angles 13:12:58 SkyScan query 13:12:59 SkyScan query done: ret=0 az=99.435<-6629 ze=-6.045<-12403 Statuses=0009 0009 13:12:59 Msec=1500 True Az=99.435 Ze=-6.045 Az status=0009 Ze status=0009 13:12:59 Check angles 13:12:59 SkyScan query 13:12:59 SkyScan query done: ret=0 az=81.57<-5438 ze=-27.48<-13832 Statuses=0009 0009 13:12:59 Msec=2250 True Az=81.57 Ze=-27.48 Az status=0009 Ze status=0009 13:13:00 Check angles 13:13:00 SkyScan query 13:13:00 SkyScan query done: ret=0 az=63.735<-4249 ze=-38.565<-14571 Statuses=0009 0008 13:13:00 Msec=3000 True Az=63.735 Ze=-38.565 Az status=0009 Ze status=0008 13:13:00 Check angles 13:13:00 SkyScan query 13:13:01 SkyScan query done: ret=0 az=46.275<-3085 ze=-38.52<-14568 Statuses=0009 0008 13:13:01 Msec=3750 True Az=46.275 Ze=-38.52 Az status=0009 Ze status=0008 13:13:01 Check angles 13:13:01 SkyScan query 13:13:02 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 13:13:02 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 13:13:02 Message to Master queued w/err=0: serial=222444 error=0 13:13:07 Received message from Master: op=Filter serial=222445 13:13:07 Color wheel filter change from 0 to 0 13:13:07 FLIGetFilterPos err=0 currentPosition=0 13:13:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:07 Filter is already there-color wheel unchanged 13:13:07 Received message from Master: op=Shutter serial=222446 13:13:07 Shutter LASER close 13:13:07 Received message from Camera: op=State serial=222448 13:13:07 GetSingleValue result=40 Value=cccccccc 13:13:07 SkyScan query 13:13:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:07 Parameters OK 13:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:07 Set A/D data flow result=40 13:13:07 Set A/D channel type result=40 13:13:07 Set A/D encoding result=40 13:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:07 Set channel filter=0.000000e+000 result=40 13:13:07 Config A/D Result=40 13:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:07 Get A/D filter: -9.255963e+061 result=40 13:13:07 Get A/D value=-858993460 result=40 13:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:07 Parameters OK 13:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:07 Set A/D data flow result=40 13:13:07 Set A/D channel type result=40 13:13:07 Set A/D encoding result=40 13:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:07 Set channel filter=0.000000e+000 result=40 13:13:07 Config A/D Result=40 13:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:07 Get A/D filter: -9.255963e+061 result=40 13:13:07 Get A/D value=-858993460 result=40 13:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:07 Aux= 13:13:07 Message to Camera, serial 222448 queued 13:13:44 Received message from Master: op=PointingHead serial=222461 13:13:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:13:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:13:45 Point started: ret=0 13:13:45 point_skyscan result=0 13:13:45 Check angles 13:13:45 SkyScan query 13:13:46 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.46<-16564 Statuses=0009 0009 13:13:46 Msec=0 True Az=64.215 Ze=-68.46 Az status=0009 Ze status=0009 13:13:46 Check angles 13:13:46 SkyScan query 13:13:47 SkyScan query done: ret=0 az=81.525<-5435 ze=-89.445<-17963 Statuses=0009 0009 13:13:47 Msec=750 True Az=81.525 Ze=-89.445 Az status=0009 Ze status=0009 13:13:47 Check angles 13:13:47 SkyScan query 13:13:47 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.385<-19359 Statuses=0009 0009 13:13:47 Msec=1500 True Az=99.12 Ze=-110.385 Az status=0009 Ze status=0009 13:13:48 Check angles 13:13:48 SkyScan query 13:13:48 SkyScan query done: ret=0 az=116.97<-7798 ze=-131.7<-20780 Statuses=0009 0009 13:13:48 Msec=2250 True Az=116.97 Ze=-131.7 Az status=0009 Ze status=0009 13:13:48 Check angles 13:13:48 SkyScan query 13:13:49 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 13:13:49 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 13:13:49 Check angles 13:13:49 SkyScan query 13:13:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:13:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:13:50 Message to Master queued w/err=0: serial=222461 error=0 13:13:55 Received message from Master: op=Filter serial=222462 13:13:55 Color wheel filter change from 0 to 0 13:13:55 FLIGetFilterPos err=0 currentPosition=0 13:13:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:55 Filter is already there-color wheel unchanged 13:13:55 Received message from Master: op=Shutter serial=222463 13:13:55 Shutter LASER close 13:13:55 Received message from Camera: op=State serial=222465 13:13:55 GetSingleValue result=40 Value=cccccccc 13:13:55 SkyScan query 13:13:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:13:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:56 Parameters OK 13:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:56 Set A/D data flow result=40 13:13:56 Set A/D channel type result=40 13:13:56 Set A/D encoding result=40 13:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:56 Set channel filter=0.000000e+000 result=40 13:13:56 Config A/D Result=40 13:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:56 Get A/D filter: -9.255963e+061 result=40 13:13:56 Get A/D value=-858993460 result=40 13:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:56 Parameters OK 13:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:56 Set A/D data flow result=40 13:13:56 Set A/D channel type result=40 13:13:56 Set A/D encoding result=40 13:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:56 Set channel filter=0.000000e+000 result=40 13:13:56 Config A/D Result=40 13:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:56 Get A/D filter: -9.255963e+061 result=40 13:13:56 Get A/D value=-858993460 result=40 13:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:56 Aux= 13:13:56 Message to Camera, serial 222465 queued 13:14:32 Received message from Master: op=PointingHead serial=222478 13:14:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:14:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:14:33 Point started: ret=0 13:14:33 point_skyscan result=0 13:14:33 Check angles 13:14:33 SkyScan query 13:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0009 0009 13:14:34 Msec=0 True Az=112.995 Ze=-170.925 Az status=0009 Ze status=0009 13:14:34 Check angles 13:14:34 SkyScan query 13:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:14:35 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:14:35 Message to Master queued w/err=0: serial=222478 error=0 13:14:40 Received message from Master: op=Filter serial=222479 13:14:40 Color wheel filter change from 0 to 0 13:14:40 FLIGetFilterPos err=0 currentPosition=0 13:14:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:40 Filter is already there-color wheel unchanged 13:14:40 Received message from Master: op=Shutter serial=222480 13:14:40 Shutter LASER open 13:14:40 Received message from Camera: op=State serial=222482 13:14:40 GetSingleValue result=40 Value=cccccccc 13:14:40 SkyScan query 13:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:14:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:41 Parameters OK 13:14:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:41 Set A/D data flow result=40 13:14:41 Set A/D channel type result=40 13:14:41 Set A/D encoding result=40 13:14:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:41 Set channel filter=0.000000e+000 result=40 13:14:41 Config A/D Result=40 13:14:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:41 Get A/D filter: -9.255963e+061 result=40 13:14:41 Get A/D value=-858993460 result=40 13:14:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:41 Parameters OK 13:14:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:41 Set A/D data flow result=40 13:14:41 Set A/D channel type result=40 13:14:41 Set A/D encoding result=40 13:14:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:41 Set channel filter=0.000000e+000 result=40 13:14:41 Config A/D Result=40 13:14:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:41 Get A/D filter: -9.255963e+061 result=40 13:14:41 Get A/D value=-858993460 result=40 13:14:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:41 Aux= 13:14:41 Message to Camera, serial 222482 queued 13:14:49 Received message from Master: op=Shutter serial=222492 13:14:49 Shutter LASER close 13:14:50 Received message from Master: op=PointingHead serial=222496 13:14:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:14:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:14:50 Point started: ret=0 13:14:50 point_skyscan result=0 13:14:51 Check angles 13:14:51 SkyScan query 13:14:51 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.325<-21555 Statuses=0009 0009 13:14:51 Msec=0 True Az=135.93 Ze=-143.325 Az status=0009 Ze status=0009 13:14:52 Check angles 13:14:52 SkyScan query 13:14:52 SkyScan query done: ret=0 az=153.33<-10222 ze=-122.355<-20157 Statuses=0009 0009 13:14:52 Msec=750 True Az=153.33 Ze=-122.355 Az status=0009 Ze status=0009 13:14:52 Check angles 13:14:52 SkyScan query 13:14:53 SkyScan query done: ret=0 az=170.82<-11388 ze=-101.46<-18764 Statuses=0009 0009 13:14:53 Msec=1500 True Az=170.82 Ze=-101.46 Az status=0009 Ze status=0009 13:14:53 Check angles 13:14:53 SkyScan query 13:14:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.46<-17364 Statuses=0008 0009 13:14:54 Msec=2250 True Az=175.995 Ze=-80.46 Az status=0008 Ze status=0009 13:14:54 Check angles 13:14:54 SkyScan query 13:14:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.49<-15966 Statuses=0008 0009 13:14:54 Msec=3000 True Az=175.995 Ze=-59.49 Az status=0008 Ze status=0009 13:14:55 Check angles 13:14:55 SkyScan query 13:14:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:14:55 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:14:55 Message to Master queued w/err=0: serial=222496 error=0 13:15:00 Received message from Master: op=Filter serial=222497 13:15:00 Color wheel filter change from 0 to 0 13:15:00 FLIGetFilterPos err=0 currentPosition=0 13:15:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:00 Filter is already there-color wheel unchanged 13:15:00 Received message from Master: op=Shutter serial=222498 13:15:00 Shutter LASER close 13:15:00 Received message from Camera: op=State serial=222500 13:15:00 GetSingleValue result=40 Value=cccccccc 13:15:00 SkyScan query 13:15:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:15:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:01 Parameters OK 13:15:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:01 Set A/D data flow result=40 13:15:01 Set A/D channel type result=40 13:15:01 Set A/D encoding result=40 13:15:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:01 Set channel filter=0.000000e+000 result=40 13:15:01 Config A/D Result=40 13:15:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:01 Get A/D filter: -9.255963e+061 result=40 13:15:01 Get A/D value=-858993460 result=40 13:15:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:01 Parameters OK 13:15:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:01 Set A/D data flow result=40 13:15:01 Set A/D channel type result=40 13:15:01 Set A/D encoding result=40 13:15:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:01 Set channel filter=0.000000e+000 result=40 13:15:01 Config A/D Result=40 13:15:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:01 Get A/D filter: -9.255963e+061 result=40 13:15:01 Get A/D value=-858993460 result=40 13:15:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:01 Aux= 13:15:01 Message to Camera, serial 222500 queued 13:15:27 Received message from Master: op=Identify serial=222501 13:15:38 Received message from Master: op=PointingHead serial=222516 13:15:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:15:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:15:38 Point started: ret=0 13:15:38 point_skyscan result=0 13:15:39 Check angles 13:15:39 SkyScan query 13:15:40 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.615<-13441 Statuses=0009 0009 13:15:40 Msec=0 True Az=152.91 Ze=-21.615 Az status=0009 Ze status=0009 [UTC 2018-12-17 13:15:40] 13:15:40 Check angles 13:15:40 SkyScan query 13:15:40 SkyScan query done: ret=0 az=133.845<-8923 ze=1.095<-11927 Statuses=0009 0009 13:15:40 Msec=750 True Az=133.845 Ze=1.095 Az status=0009 Ze status=0009 13:15:41 Check angles 13:15:41 SkyScan query 13:15:41 SkyScan query done: ret=0 az=117.795<-7853 ze=20.415<-10639 Statuses=0009 0009 13:15:41 Msec=1500 True Az=117.795 Ze=20.415 Az status=0009 Ze status=0009 13:15:41 Check angles 13:15:41 SkyScan query 13:15:42 SkyScan query done: ret=0 az=100.44<-6696 ze=41.31<-9246 Statuses=0009 0009 13:15:42 Msec=2250 True Az=100.44 Ze=41.31 Az status=0009 Ze status=0009 13:15:42 Check angles 13:15:42 SkyScan query 13:15:43 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 13:15:43 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 13:15:43 Check angles 13:15:43 SkyScan query 13:15:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:15:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:15:43 Message to Master queued w/err=0: serial=222516 error=0 13:15:48 Received message from Master: op=Filter serial=222517 13:15:48 Color wheel filter change from 0 to 0 13:15:48 FLIGetFilterPos err=0 currentPosition=0 13:15:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:48 Filter is already there-color wheel unchanged 13:15:49 Received message from Master: op=Shutter serial=222518 13:15:49 Shutter LASER close 13:15:49 Received message from Camera: op=State serial=222520 13:15:49 GetSingleValue result=40 Value=cccccccc 13:15:49 SkyScan query 13:15:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:15:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:49 Parameters OK 13:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:49 Set A/D data flow result=40 13:15:49 Set A/D channel type result=40 13:15:49 Set A/D encoding result=40 13:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:49 Set channel filter=0.000000e+000 result=40 13:15:49 Config A/D Result=40 13:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:49 Get A/D filter: -9.255963e+061 result=40 13:15:49 Get A/D value=-858993460 result=40 13:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:49 Parameters OK 13:15:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:49 Set A/D data flow result=40 13:15:49 Set A/D channel type result=40 13:15:49 Set A/D encoding result=40 13:15:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:49 Set channel filter=0.000000e+000 result=40 13:15:49 Config A/D Result=40 13:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:49 Get A/D filter: -9.255963e+061 result=40 13:15:49 Get A/D value=-858993460 result=40 13:15:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:49 Aux= 13:15:49 Message to Camera, serial 222520 queued [UTC 2018-12-17 13:15:52] 13:16:26 Received message from Master: op=PointingHead serial=222533 13:16:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:16:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:16:26 Point started: ret=0 13:16:26 point_skyscan result=0 13:16:27 Check angles 13:16:27 SkyScan query 13:16:28 SkyScan query done: ret=0 az=108.765<-7251 ze=38.475<-9435 Statuses=0009 0008 13:16:28 Msec=0 True Az=108.765 Ze=38.475 Az status=0009 Ze status=0008 13:16:28 Check angles 13:16:28 SkyScan query 13:16:28 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 13:16:28 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 13:16:29 Check angles 13:16:29 SkyScan query 13:16:29 SkyScan query done: ret=0 az=144.135<-9609 ze=38.505<-9433 Statuses=0009 0008 13:16:29 Msec=1500 True Az=144.135 Ze=38.505 Az status=0009 Ze status=0008 13:16:29 Check angles 13:16:29 SkyScan query 13:16:30 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 13:16:30 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 13:16:30 Check angles 13:16:30 SkyScan query 13:16:31 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:16:31 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:16:31 Check angles 13:16:31 SkyScan query 13:16:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:16:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:16:31 Message to Master queued w/err=0: serial=222533 error=0 13:16:36 Received message from Master: op=Filter serial=222534 13:16:36 Color wheel filter change from 0 to 0 13:16:36 FLIGetFilterPos err=0 currentPosition=0 13:16:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:36 Filter is already there-color wheel unchanged 13:16:37 Received message from Master: op=Shutter serial=222535 13:16:37 Shutter LASER close 13:16:37 Received message from Camera: op=State serial=222537 13:16:37 GetSingleValue result=40 Value=cccccccc 13:16:37 SkyScan query 13:16:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:16:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:37 Parameters OK 13:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:37 Set A/D data flow result=40 13:16:37 Set A/D channel type result=40 13:16:37 Set A/D encoding result=40 13:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:37 Set channel filter=0.000000e+000 result=40 13:16:37 Config A/D Result=40 13:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:37 Get A/D filter: -9.255963e+061 result=40 13:16:37 Get A/D value=-858993460 result=40 13:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:37 Parameters OK 13:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:37 Set A/D data flow result=40 13:16:37 Set A/D channel type result=40 13:16:37 Set A/D encoding result=40 13:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:37 Set channel filter=0.000000e+000 result=40 13:16:37 Config A/D Result=40 13:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:37 Get A/D filter: -9.255963e+061 result=40 13:16:37 Get A/D value=-858993460 result=40 13:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:37 Aux= 13:16:37 Message to Camera, serial 222537 queued 13:17:14 Received message from Master: op=PointingHead serial=222550 13:17:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:17:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:17:14 Point started: ret=0 13:17:14 point_skyscan result=0 13:17:15 Check angles 13:17:15 SkyScan query 13:17:16 SkyScan query done: ret=0 az=152.955<-10197 ze=8.715<-11419 Statuses=0009 0009 13:17:16 Msec=0 True Az=152.955 Ze=8.715 Az status=0009 Ze status=0009 13:17:16 Check angles 13:17:16 SkyScan query 13:17:17 SkyScan query done: ret=0 az=135.195<-9013 ze=-12.66<-12844 Statuses=0009 0009 13:17:17 Msec=750 True Az=135.195 Ze=-12.66 Az status=0009 Ze status=0009 13:17:17 Check angles 13:17:17 SkyScan query 13:17:17 SkyScan query done: ret=0 az=117.285<-7819 ze=-34.11<-14274 Statuses=0009 0009 13:17:17 Msec=1500 True Az=117.285 Ze=-34.11 Az status=0009 Ze status=0009 13:17:17 Check angles 13:17:17 SkyScan query 13:17:18 SkyScan query done: ret=0 az=99.945<-6663 ze=-51.555<-15437 Statuses=0009 0009 13:17:18 Msec=2250 True Az=99.945 Ze=-51.555 Az status=0009 Ze status=0009 13:17:18 Check angles 13:17:18 SkyScan query 13:17:19 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 13:17:19 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 13:17:19 Check angles 13:17:19 SkyScan query 13:17:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:17:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:17:20 Message to Master queued w/err=0: serial=222550 error=0 13:17:25 Received message from Master: op=Filter serial=222551 13:17:25 Color wheel filter change from 0 to 0 13:17:25 FLIGetFilterPos err=0 currentPosition=0 13:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:25 Filter is already there-color wheel unchanged 13:17:25 Received message from Master: op=Shutter serial=222552 13:17:25 Shutter LASER close 13:17:25 Received message from Camera: op=State serial=222554 13:17:25 GetSingleValue result=40 Value=cccccccc 13:17:25 SkyScan query 13:17:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:17:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:25 Parameters OK 13:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:25 Set A/D data flow result=40 13:17:25 Set A/D channel type result=40 13:17:25 Set A/D encoding result=40 13:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:25 Set channel filter=0.000000e+000 result=40 13:17:25 Config A/D Result=40 13:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:25 Get A/D filter: -9.255963e+061 result=40 13:17:25 Get A/D value=-858993460 result=40 13:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:25 Parameters OK 13:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:25 Set A/D data flow result=40 13:17:25 Set A/D channel type result=40 13:17:25 Set A/D encoding result=40 13:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:25 Set channel filter=0.000000e+000 result=40 13:17:25 Config A/D Result=40 13:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:25 Get A/D filter: -9.255963e+061 result=40 13:17:25 Get A/D value=-858993460 result=40 13:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:25 Aux= 13:17:25 Message to Camera, serial 222554 queued 13:18:02 Received message from Master: op=PointingHead serial=222567 13:18:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:18:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:18:03 Point started: ret=0 13:18:03 point_skyscan result=0 13:18:03 Check angles 13:18:03 SkyScan query 13:18:04 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.21<-17414 Statuses=0009 0009 13:18:04 Msec=0 True Az=108.93 Ze=-81.21 Az status=0009 Ze status=0009 13:18:04 Check angles 13:18:04 SkyScan query 13:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 13:18:05 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 13:18:05 Check angles 13:18:05 SkyScan query 13:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 13:18:05 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 13:18:06 Check angles 13:18:06 SkyScan query 13:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.135<-21609 Statuses=0008 0009 13:18:06 Msec=2250 True Az=112.995 Ze=-144.135 Az status=0008 Ze status=0009 13:18:06 Check angles 13:18:06 SkyScan query 13:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.03<-23002 Statuses=0008 0009 13:18:07 Msec=3000 True Az=112.995 Ze=-165.03 Az status=0008 Ze status=0009 13:18:07 Check angles 13:18:07 SkyScan query 13:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:18:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:18:08 Message to Master queued w/err=0: serial=222567 error=0 13:18:13 Received message from Master: op=Filter serial=222568 13:18:13 Color wheel filter change from 0 to 0 13:18:13 FLIGetFilterPos err=0 currentPosition=0 13:18:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:13 Filter is already there-color wheel unchanged 13:18:13 Received message from Master: op=Shutter serial=222569 13:18:13 Shutter LASER open 13:18:13 Received message from Camera: op=State serial=222571 13:18:13 GetSingleValue result=40 Value=cccccccc 13:18:13 SkyScan query 13:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:18:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:14 Parameters OK 13:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:14 Set A/D data flow result=40 13:18:14 Set A/D channel type result=40 13:18:14 Set A/D encoding result=40 13:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:14 Set channel filter=0.000000e+000 result=40 13:18:14 Config A/D Result=40 13:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:14 Get A/D filter: -9.255963e+061 result=40 13:18:14 Get A/D value=-858993460 result=40 13:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:14 Parameters OK 13:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:14 Set A/D data flow result=40 13:18:14 Set A/D channel type result=40 13:18:14 Set A/D encoding result=40 13:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:14 Set channel filter=0.000000e+000 result=40 13:18:14 Config A/D Result=40 13:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:14 Get A/D filter: -9.255963e+061 result=40 13:18:14 Get A/D value=-858993460 result=40 13:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:14 Aux= 13:18:14 Message to Camera, serial 222571 queued 13:18:22 Received message from Master: op=Shutter serial=222581 13:18:22 Shutter LASER close 13:18:22 Received message from Master: op=PointingHead serial=222585 13:18:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:18:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:18:23 Point started: ret=0 13:18:23 point_skyscan result=0 13:18:24 Check angles 13:18:24 SkyScan query 13:18:24 SkyScan query done: ret=0 az=89.565<-5971 ze=156.78<-1548 Statuses=0009 0009 13:18:24 Msec=0 True Az=89.565 Ze=156.78 Az status=0009 Ze status=0009 13:18:24 Check angles 13:18:24 SkyScan query 13:18:25 SkyScan query done: ret=0 az=72.03<-4802 ze=135.81<-2946 Statuses=0009 0009 13:18:25 Msec=750 True Az=72.03 Ze=135.81 Az status=0009 Ze status=0009 13:18:25 Check angles 13:18:25 SkyScan query 13:18:26 SkyScan query done: ret=0 az=54.75<-3650 ze=114.855<-4343 Statuses=0009 0009 13:18:26 Msec=1500 True Az=54.75 Ze=114.855 Az status=0009 Ze status=0009 13:18:26 Check angles 13:18:26 SkyScan query 13:18:26 SkyScan query done: ret=0 az=40.965<-2731 ze=93.9<-5740 Statuses=0009 0009 13:18:26 Msec=2250 True Az=40.965 Ze=93.9 Az status=0009 Ze status=0009 13:18:27 Check angles 13:18:27 SkyScan query 13:18:27 SkyScan query done: ret=0 az=40.995<-2733 ze=72.93<-7138 Statuses=0008 0009 13:18:27 Msec=3000 True Az=40.995 Ze=72.93 Az status=0008 Ze status=0009 13:18:27 Check angles 13:18:27 SkyScan query 13:18:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 13:18:28 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 13:18:28 Check angles 13:18:28 SkyScan query 13:18:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:18:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:18:29 Message to Master queued w/err=0: serial=222585 error=0 13:18:34 Received message from Master: op=Filter serial=222586 13:18:34 Color wheel filter change from 0 to 0 13:18:34 FLIGetFilterPos err=0 currentPosition=0 13:18:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:34 Filter is already there-color wheel unchanged 13:18:34 Received message from Master: op=Shutter serial=222587 13:18:34 Shutter LASER close 13:18:34 Received message from Camera: op=State serial=222589 13:18:34 GetSingleValue result=40 Value=cccccccc 13:18:34 SkyScan query 13:18:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:18:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:35 Parameters OK 13:18:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:35 Set A/D data flow result=40 13:18:35 Set A/D channel type result=40 13:18:35 Set A/D encoding result=40 13:18:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:35 Set channel filter=0.000000e+000 result=40 13:18:35 Config A/D Result=40 13:18:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:35 Get A/D filter: -9.255963e+061 result=40 13:18:35 Get A/D value=-858993460 result=40 13:18:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:35 Parameters OK 13:18:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:35 Set A/D data flow result=40 13:18:35 Set A/D channel type result=40 13:18:35 Set A/D encoding result=40 13:18:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:35 Set channel filter=0.000000e+000 result=40 13:18:35 Config A/D Result=40 13:18:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:35 Get A/D filter: -9.255963e+061 result=40 13:18:35 Get A/D value=-858993460 result=40 13:18:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:35 Aux= 13:18:35 Message to Camera, serial 222589 queued 13:19:11 Received message from Master: op=PointingHead serial=222602 13:19:11 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:19:11 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:19:12 Point started: ret=0 13:19:12 point_skyscan result=0 13:19:12 Check angles 13:19:12 SkyScan query 13:19:13 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 13:19:13 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 13:19:13 Check angles 13:19:13 SkyScan query 13:19:14 SkyScan query done: ret=0 az=81.855<-5457 ze=66.495<-7567 Statuses=0009 0008 13:19:14 Msec=750 True Az=81.855 Ze=66.495 Az status=0009 Ze status=0008 13:19:14 Check angles 13:19:14 SkyScan query 13:19:15 SkyScan query done: ret=0 az=99.465<-6631 ze=66.495<-7567 Statuses=0009 0008 13:19:15 Msec=1500 True Az=99.465 Ze=66.495 Az status=0009 Ze status=0008 13:19:15 Check angles 13:19:15 SkyScan query 13:19:15 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 13:19:15 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 13:19:15 Check angles 13:19:15 SkyScan query 13:19:16 SkyScan query done: ret=0 az=134.82<-8988 ze=66.495<-7567 Statuses=0009 0008 13:19:16 Msec=3000 True Az=134.82 Ze=66.495 Az status=0009 Ze status=0008 13:19:16 Check angles 13:19:16 SkyScan query 13:19:17 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 13:19:17 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 13:19:17 Check angles 13:19:17 SkyScan query 13:19:18 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:19:18 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:19:18 Message to Master queued w/err=0: serial=222602 error=0 13:19:23 Received message from Master: op=Filter serial=222603 13:19:23 Color wheel filter change from 0 to 0 13:19:23 FLIGetFilterPos err=0 currentPosition=0 13:19:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:23 Filter is already there-color wheel unchanged 13:19:23 Received message from Master: op=Shutter serial=222604 13:19:23 Shutter LASER close 13:19:23 Received message from Camera: op=State serial=222606 13:19:23 GetSingleValue result=40 Value=cccccccc 13:19:23 SkyScan query 13:19:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:19:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:23 Parameters OK 13:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:23 Set A/D data flow result=40 13:19:23 Set A/D channel type result=40 13:19:23 Set A/D encoding result=40 13:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:23 Set channel filter=0.000000e+000 result=40 13:19:23 Config A/D Result=40 13:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:23 Get A/D filter: -9.255963e+061 result=40 13:19:23 Get A/D value=-858993460 result=40 13:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:23 Parameters OK 13:19:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:23 Set A/D data flow result=40 13:19:23 Set A/D channel type result=40 13:19:23 Set A/D encoding result=40 13:19:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:23 Set channel filter=0.000000e+000 result=40 13:19:23 Config A/D Result=40 13:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:23 Get A/D filter: -9.255963e+061 result=40 13:19:23 Get A/D value=-858993460 result=40 13:19:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:23 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:23 Aux= 13:19:23 Message to Camera, serial 222606 queued 13:20:00 Received message from Master: op=PointingHead serial=222619 13:20:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:20:00 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:20:01 Point started: ret=0 13:20:01 point_skyscan result=0 13:20:01 Check angles 13:20:01 SkyScan query 13:20:02 SkyScan query done: ret=0 az=135.06<-9004 ze=36.765<-9549 Statuses=0009 0009 13:20:02 Msec=0 True Az=135.06 Ze=36.765 Az status=0009 Ze status=0009 13:20:02 Check angles 13:20:02 SkyScan query 13:20:03 SkyScan query done: ret=0 az=117.525<-7835 ze=15.78<-10948 Statuses=0009 0009 13:20:03 Msec=750 True Az=117.525 Ze=15.78 Az status=0009 Ze status=0009 13:20:03 Check angles 13:20:03 SkyScan query 13:20:03 SkyScan query done: ret=0 az=100.17<-6678 ze=-5.16<-12344 Statuses=0009 0009 13:20:03 Msec=1500 True Az=100.17 Ze=-5.16 Az status=0009 Ze status=0009 13:20:04 Check angles 13:20:04 SkyScan query 13:20:04 SkyScan query done: ret=0 az=82.635<-5509 ze=-26.22<-13748 Statuses=0009 0009 13:20:04 Msec=2250 True Az=82.635 Ze=-26.22 Az status=0009 Ze status=0009 13:20:04 Check angles 13:20:04 SkyScan query 13:20:05 SkyScan query done: ret=0 az=65.115<-4341 ze=-38.565<-14571 Statuses=0009 0008 13:20:05 Msec=3000 True Az=65.115 Ze=-38.565 Az status=0009 Ze status=0008 13:20:05 Check angles 13:20:05 SkyScan query 13:20:06 SkyScan query done: ret=0 az=47.67<-3178 ze=-38.535<-14569 Statuses=0009 0008 13:20:06 Msec=3750 True Az=47.67 Ze=-38.535 Az status=0009 Ze status=0008 13:20:06 Check angles 13:20:06 SkyScan query 13:20:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:20:06 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:20:06 Message to Master queued w/err=0: serial=222619 error=0 13:20:11 Received message from Master: op=Filter serial=222620 13:20:11 Color wheel filter change from 0 to 0 13:20:11 FLIGetFilterPos err=0 currentPosition=0 13:20:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:11 Filter is already there-color wheel unchanged 13:20:12 Received message from Master: op=Shutter serial=222621 13:20:12 Shutter LASER close 13:20:12 Received message from Camera: op=State serial=222623 13:20:12 GetSingleValue result=40 Value=cccccccc 13:20:12 SkyScan query 13:20:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:20:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:12 Parameters OK 13:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:12 Set A/D data flow result=40 13:20:12 Set A/D channel type result=40 13:20:12 Set A/D encoding result=40 13:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:12 Set channel filter=0.000000e+000 result=40 13:20:12 Config A/D Result=40 13:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:12 Get A/D filter: -9.255963e+061 result=40 13:20:12 Get A/D value=-858993460 result=40 13:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:12 Parameters OK 13:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:12 Set A/D data flow result=40 13:20:12 Set A/D channel type result=40 13:20:12 Set A/D encoding result=40 13:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:12 Set channel filter=0.000000e+000 result=40 13:20:12 Config A/D Result=40 13:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:12 Get A/D filter: -9.255963e+061 result=40 13:20:12 Get A/D value=-858993460 result=40 13:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:12 Aux= 13:20:12 Message to Camera, serial 222623 queued 13:20:48 Received message from Master: op=PointingHead serial=222635 13:20:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:20:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:20:49 Point started: ret=0 13:20:49 point_skyscan result=0 13:20:49 Check angles 13:20:49 SkyScan query 13:20:50 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.415<-16561 Statuses=0009 0009 13:20:50 Msec=0 True Az=64.215 Ze=-68.415 Az status=0009 Ze status=0009 13:20:50 Check angles 13:20:50 SkyScan query 13:20:51 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.415<-17961 Statuses=0009 0009 13:20:51 Msec=750 True Az=81.495 Ze=-89.415 Az status=0009 Ze status=0009 13:20:51 Check angles 13:20:51 SkyScan query 13:20:51 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.37<-19358 Statuses=0009 0009 13:20:51 Msec=1500 True Az=99.09 Ze=-110.37 Az status=0009 Ze status=0009 13:20:52 Check angles 13:20:52 SkyScan query 13:20:52 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.31<-20754 Statuses=0009 0009 13:20:52 Msec=2250 True Az=116.625 Ze=-131.31 Az status=0009 Ze status=0009 13:20:52 Check angles 13:20:52 SkyScan query 13:20:53 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 13:20:53 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 13:20:53 Check angles 13:20:53 SkyScan query 13:20:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:20:54 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:20:54 Message to Master queued w/err=0: serial=222635 error=0 13:20:59 Received message from Master: op=Filter serial=222636 13:20:59 Color wheel filter change from 0 to 0 13:20:59 FLIGetFilterPos err=0 currentPosition=0 13:20:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:59 Filter is already there-color wheel unchanged 13:20:59 Received message from Master: op=Shutter serial=222637 13:20:59 Shutter LASER close 13:20:59 Received message from Camera: op=State serial=222639 13:20:59 GetSingleValue result=40 Value=cccccccc 13:20:59 SkyScan query 13:20:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:20:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:59 Parameters OK 13:20:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:59 Set A/D data flow result=40 13:20:59 Set A/D channel type result=40 13:20:59 Set A/D encoding result=40 13:20:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:59 Set channel filter=0.000000e+000 result=40 13:20:59 Config A/D Result=40 13:20:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:59 Get A/D filter: -9.255963e+061 result=40 13:20:59 Get A/D value=-858993460 result=40 13:20:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:59 Parameters OK 13:20:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:59 Set A/D data flow result=40 13:20:59 Set A/D channel type result=40 13:20:59 Set A/D encoding result=40 13:20:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:59 Set channel filter=0.000000e+000 result=40 13:20:59 Config A/D Result=40 13:20:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:59 Get A/D filter: -9.255963e+061 result=40 13:20:59 Get A/D value=-858993460 result=40 13:20:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:59 Aux= 13:20:59 Message to Camera, serial 222639 queued 13:21:36 Received message from Master: op=PointingHead serial=222652 13:21:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:21:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:21:37 Point started: ret=0 13:21:37 point_skyscan result=0 13:21:37 Check angles 13:21:37 SkyScan query 13:21:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 13:21:38 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 13:21:38 Check angles 13:21:38 SkyScan query 13:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:21:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:21:39 Message to Master queued w/err=0: serial=222652 error=0 13:21:44 Received message from Master: op=Filter serial=222653 13:21:44 Color wheel filter change from 0 to 0 13:21:44 FLIGetFilterPos err=0 currentPosition=0 13:21:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:44 Filter is already there-color wheel unchanged 13:21:44 Received message from Master: op=Shutter serial=222654 13:21:44 Shutter LASER open 13:21:44 Received message from Camera: op=State serial=222656 13:21:44 GetSingleValue result=40 Value=cccccccc 13:21:44 SkyScan query 13:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:21:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:45 Parameters OK 13:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:45 Set A/D data flow result=40 13:21:45 Set A/D channel type result=40 13:21:45 Set A/D encoding result=40 13:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:45 Set channel filter=0.000000e+000 result=40 13:21:45 Config A/D Result=40 13:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:45 Get A/D filter: -9.255963e+061 result=40 13:21:45 Get A/D value=-858993460 result=40 13:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:45 Parameters OK 13:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:45 Set A/D data flow result=40 13:21:45 Set A/D channel type result=40 13:21:45 Set A/D encoding result=40 13:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:45 Set channel filter=0.000000e+000 result=40 13:21:45 Config A/D Result=40 13:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:45 Get A/D filter: -9.255963e+061 result=40 13:21:45 Get A/D value=-858993460 result=40 13:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:45 Aux= 13:21:45 Message to Camera, serial 222656 queued 13:21:53 Received message from Master: op=Shutter serial=222666 13:21:53 Shutter LASER close 13:21:54 Received message from Master: op=PointingHead serial=222670 13:21:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:21:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:21:54 Point started: ret=0 13:21:54 point_skyscan result=0 13:21:55 Check angles 13:21:55 SkyScan query 13:21:55 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.34<-21556 Statuses=0009 0009 13:21:55 Msec=0 True Az=135.945 Ze=-143.34 Az status=0009 Ze status=0009 13:21:55 Check angles 13:21:55 SkyScan query 13:21:56 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.92<-20128 Statuses=0009 0009 13:21:56 Msec=750 True Az=153.75 Ze=-121.92 Az status=0009 Ze status=0009 13:21:56 Check angles 13:21:56 SkyScan query 13:21:57 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.965<-18731 Statuses=0009 0009 13:21:57 Msec=1500 True Az=171.225 Ze=-100.965 Az status=0009 Ze status=0009 13:21:57 Check angles 13:21:57 SkyScan query 13:21:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.055<-17337 Statuses=0008 0009 13:21:58 Msec=2250 True Az=175.995 Ze=-80.055 Az status=0008 Ze status=0009 13:21:58 Check angles 13:21:58 SkyScan query 13:21:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.59<-15906 Statuses=0008 0009 13:21:58 Msec=3000 True Az=176.01 Ze=-58.59 Az status=0008 Ze status=0009 13:21:58 Check angles 13:21:58 SkyScan query 13:21:59 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 13:21:59 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 13:21:59 Message to Master queued w/err=0: serial=222670 error=0 13:22:04 Received message from Master: op=Filter serial=222671 13:22:04 Color wheel filter change from 0 to 0 13:22:04 FLIGetFilterPos err=0 currentPosition=0 13:22:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:04 Filter is already there-color wheel unchanged 13:22:04 Received message from Master: op=Shutter serial=222672 13:22:04 Shutter LASER close 13:22:04 Received message from Camera: op=State serial=222674 13:22:04 GetSingleValue result=40 Value=cccccccc 13:22:04 SkyScan query 13:22:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:22:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:05 Parameters OK 13:22:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:05 Set A/D data flow result=40 13:22:05 Set A/D channel type result=40 13:22:05 Set A/D encoding result=40 13:22:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:05 Set channel filter=0.000000e+000 result=40 13:22:05 Config A/D Result=40 13:22:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:05 Get A/D filter: -9.255963e+061 result=40 13:22:05 Get A/D value=-858993460 result=40 13:22:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:05 Parameters OK 13:22:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:05 Set A/D data flow result=40 13:22:05 Set A/D channel type result=40 13:22:05 Set A/D encoding result=40 13:22:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:05 Set channel filter=0.000000e+000 result=40 13:22:05 Config A/D Result=40 13:22:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:05 Get A/D filter: -9.255963e+061 result=40 13:22:05 Get A/D value=-858993460 result=40 13:22:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:05 Aux= 13:22:05 Message to Camera, serial 222674 queued 13:22:42 Received message from Master: op=PointingHead serial=222687 13:22:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:22:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:22:42 Point started: ret=0 13:22:42 point_skyscan result=0 13:22:43 Check angles 13:22:43 SkyScan query 13:22:43 SkyScan query done: ret=0 az=152.55<-10170 ze=-21.21<-13414 Statuses=0009 0009 13:22:43 Msec=0 True Az=152.55 Ze=-21.21 Az status=0009 Ze status=0009 13:22:44 Check angles 13:22:44 SkyScan query 13:22:44 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.24<-12016 Statuses=0009 0009 13:22:44 Msec=750 True Az=135.03 Ze=-0.24 Az status=0009 Ze status=0009 13:22:44 Check angles 13:22:44 SkyScan query 13:22:45 SkyScan query done: ret=0 az=117.525<-7835 ze=20.685<-10621 Statuses=0009 0009 13:22:45 Msec=1500 True Az=117.525 Ze=20.685 Az status=0009 Ze status=0009 13:22:45 Check angles 13:22:45 SkyScan query 13:22:46 SkyScan query done: ret=0 az=100.155<-6677 ze=41.655<-9223 Statuses=0009 0009 13:22:46 Msec=2250 True Az=100.155 Ze=41.655 Az status=0009 Ze status=0009 13:22:46 Check angles 13:22:46 SkyScan query 13:22:46 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 13:22:46 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 13:22:47 Check angles 13:22:47 SkyScan query 13:22:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:22:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:22:47 Message to Master queued w/err=0: serial=222687 error=0 13:22:52 Received message from Master: op=Filter serial=222688 13:22:52 Color wheel filter change from 0 to 0 13:22:52 FLIGetFilterPos err=0 currentPosition=0 13:22:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:52 Filter is already there-color wheel unchanged 13:22:52 Received message from Master: op=Shutter serial=222689 13:22:52 Shutter LASER close 13:22:52 Received message from Camera: op=State serial=222691 13:22:52 GetSingleValue result=40 Value=cccccccc 13:22:52 SkyScan query 13:22:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:22:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:53 Parameters OK 13:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:53 Set A/D data flow result=40 13:22:53 Set A/D channel type result=40 13:22:53 Set A/D encoding result=40 13:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:53 Set channel filter=0.000000e+000 result=40 13:22:53 Config A/D Result=40 13:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:53 Get A/D filter: -9.255963e+061 result=40 13:22:53 Get A/D value=-858993460 result=40 13:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:53 Parameters OK 13:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:53 Set A/D data flow result=40 13:22:53 Set A/D channel type result=40 13:22:53 Set A/D encoding result=40 13:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:53 Set channel filter=0.000000e+000 result=40 13:22:53 Config A/D Result=40 13:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:53 Get A/D filter: -9.255963e+061 result=40 13:22:53 Get A/D value=-858993460 result=40 13:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:53 Aux= 13:22:53 Message to Camera, serial 222691 queued 13:23:30 Received message from Master: op=PointingHead serial=222704 13:23:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:23:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:23:30 Point started: ret=0 13:23:30 point_skyscan result=0 13:23:31 Check angles 13:23:31 SkyScan query 13:23:32 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 13:23:32 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 13:23:32 Check angles 13:23:32 SkyScan query 13:23:32 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 13:23:32 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 13:23:32 Check angles 13:23:32 SkyScan query 13:23:33 SkyScan query done: ret=0 az=144.3<-9620 ze=38.505<-9433 Statuses=0009 0008 13:23:33 Msec=1500 True Az=144.3 Ze=38.505 Az status=0009 Ze status=0008 13:23:33 Check angles 13:23:33 SkyScan query 13:23:34 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 13:23:34 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 13:23:34 Check angles 13:23:34 SkyScan query 13:23:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:23:35 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:23:35 Check angles 13:23:35 SkyScan query 13:23:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:23:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:23:35 Message to Master queued w/err=0: serial=222704 error=0 13:23:40 Received message from Master: op=Filter serial=222705 13:23:40 Color wheel filter change from 0 to 0 13:23:40 FLIGetFilterPos err=0 currentPosition=0 13:23:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:40 Filter is already there-color wheel unchanged 13:23:40 Received message from Master: op=Shutter serial=222706 13:23:40 Shutter LASER close 13:23:41 Received message from Camera: op=State serial=222708 13:23:41 GetSingleValue result=40 Value=cccccccc 13:23:41 SkyScan query 13:23:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:23:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:41 Parameters OK 13:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:41 Set A/D data flow result=40 13:23:41 Set A/D channel type result=40 13:23:41 Set A/D encoding result=40 13:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:41 Set channel filter=0.000000e+000 result=40 13:23:41 Config A/D Result=40 13:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:41 Get A/D filter: -9.255963e+061 result=40 13:23:41 Get A/D value=-858993460 result=40 13:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:41 Parameters OK 13:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:41 Set A/D data flow result=40 13:23:41 Set A/D channel type result=40 13:23:41 Set A/D encoding result=40 13:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:41 Set channel filter=0.000000e+000 result=40 13:23:41 Config A/D Result=40 13:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:41 Get A/D filter: -9.255963e+061 result=40 13:23:41 Get A/D value=-858993460 result=40 13:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:41 Aux= 13:23:41 Message to Camera, serial 222708 queued 13:24:18 Received message from Master: op=PointingHead serial=222721 13:24:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:24:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:24:18 Point started: ret=0 13:24:18 point_skyscan result=0 13:24:19 Check angles 13:24:19 SkyScan query 13:24:20 SkyScan query done: ret=0 az=153.135<-10209 ze=8.835<-11411 Statuses=0009 0009 13:24:20 Msec=0 True Az=153.135 Ze=8.835 Az status=0009 Ze status=0009 13:24:20 Check angles 13:24:20 SkyScan query 13:24:20 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.54<-12836 Statuses=0009 0009 13:24:20 Msec=750 True Az=135.285 Ze=-12.54 Az status=0009 Ze status=0009 13:24:21 Check angles 13:24:21 SkyScan query 13:24:21 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.48<-14232 Statuses=0009 0009 13:24:21 Msec=1500 True Az=117.765 Ze=-33.48 Az status=0009 Ze status=0009 13:24:21 Check angles 13:24:21 SkyScan query 13:24:22 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 13:24:22 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 13:24:22 Check angles 13:24:22 SkyScan query 13:24:23 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 13:24:23 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 13:24:23 Check angles 13:24:23 SkyScan query 13:24:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:24:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:24:23 Message to Master queued w/err=0: serial=222721 error=0 13:24:28 Received message from Master: op=Filter serial=222722 13:24:28 Color wheel filter change from 0 to 0 13:24:28 FLIGetFilterPos err=0 currentPosition=0 13:24:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:28 Filter is already there-color wheel unchanged 13:24:29 Received message from Master: op=Shutter serial=222723 13:24:29 Shutter LASER close 13:24:29 Received message from Camera: op=State serial=222725 13:24:29 GetSingleValue result=40 Value=cccccccc 13:24:29 SkyScan query 13:24:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:24:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:29 Parameters OK 13:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:29 Set A/D data flow result=40 13:24:29 Set A/D channel type result=40 13:24:29 Set A/D encoding result=40 13:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:29 Set channel filter=0.000000e+000 result=40 13:24:29 Config A/D Result=40 13:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:29 Get A/D filter: -9.255963e+061 result=40 13:24:29 Get A/D value=-858993460 result=40 13:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:29 Parameters OK 13:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:29 Set A/D data flow result=40 13:24:29 Set A/D channel type result=40 13:24:29 Set A/D encoding result=40 13:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:29 Set channel filter=0.000000e+000 result=40 13:24:29 Config A/D Result=40 13:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:29 Get A/D filter: -9.255963e+061 result=40 13:24:29 Get A/D value=-858993460 result=40 13:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:29 Aux= 13:24:29 Message to Camera, serial 222725 queued 13:25:06 Received message from Master: op=PointingHead serial=222738 13:25:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:25:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:25:06 Point started: ret=0 13:25:06 point_skyscan result=0 13:25:07 Check angles 13:25:07 SkyScan query 13:25:08 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.57<-17438 Statuses=0009 0009 13:25:08 Msec=0 True Az=109.2 Ze=-81.57 Az status=0009 Ze status=0009 13:25:08 Check angles 13:25:08 SkyScan query 13:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.96<-18864 Statuses=0008 0009 13:25:08 Msec=750 True Az=112.995 Ze=-102.96 Az status=0008 Ze status=0009 13:25:09 Check angles 13:25:09 SkyScan query 13:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 13:25:09 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 13:25:09 Check angles 13:25:09 SkyScan query 13:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.245<-21683 Statuses=0008 0009 13:25:10 Msec=2250 True Az=112.995 Ze=-145.245 Az status=0008 Ze status=0009 13:25:10 Check angles 13:25:10 SkyScan query 13:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.665<-23111 Statuses=0008 0009 13:25:11 Msec=3000 True Az=112.995 Ze=-166.665 Az status=0008 Ze status=0009 13:25:11 Check angles 13:25:11 SkyScan query 13:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:25:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:25:12 Message to Master queued w/err=0: serial=222738 error=0 13:25:17 Received message from Master: op=Filter serial=222739 13:25:17 Color wheel filter change from 0 to 0 13:25:17 FLIGetFilterPos err=0 currentPosition=0 13:25:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:17 Filter is already there-color wheel unchanged 13:25:17 Received message from Master: op=Shutter serial=222740 13:25:17 Shutter LASER open 13:25:17 Received message from Camera: op=State serial=222742 13:25:17 GetSingleValue result=40 Value=cccccccc 13:25:17 SkyScan query 13:25:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:25:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:17 Parameters OK 13:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:17 Set A/D data flow result=40 13:25:17 Set A/D channel type result=40 13:25:17 Set A/D encoding result=40 13:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:17 Set channel filter=0.000000e+000 result=40 13:25:17 Config A/D Result=40 13:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:17 Get A/D filter: -9.255963e+061 result=40 13:25:17 Get A/D value=-858993460 result=40 13:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:17 Parameters OK 13:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:17 Set A/D data flow result=40 13:25:17 Set A/D channel type result=40 13:25:17 Set A/D encoding result=40 13:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:17 Set channel filter=0.000000e+000 result=40 13:25:17 Config A/D Result=40 13:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:17 Get A/D filter: -9.255963e+061 result=40 13:25:17 Get A/D value=-858993460 result=40 13:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:17 Aux= 13:25:17 Message to Camera, serial 222742 queued 13:25:25 Received message from Master: op=Shutter serial=222751 13:25:25 Shutter LASER close 13:25:25 Received message from Master: op=PointingHead serial=222755 13:25:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:25:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:25:26 Point started: ret=0 13:25:26 point_skyscan result=0 13:25:27 Check angles 13:25:27 SkyScan query 13:25:27 SkyScan query done: ret=0 az=89.625<-5975 ze=156.885<-1541 Statuses=0009 0009 13:25:27 Msec=0 True Az=89.625 Ze=156.885 Az status=0009 Ze status=0009 13:25:27 Check angles 13:25:27 SkyScan query 13:25:28 SkyScan query done: ret=0 az=71.745<-4783 ze=135.48<-2968 Statuses=0009 0009 13:25:28 Msec=750 True Az=71.745 Ze=135.48 Az status=0009 Ze status=0009 13:25:28 Check angles 13:25:28 SkyScan query 13:25:29 SkyScan query done: ret=0 az=54.51<-3634 ze=114.48<-4368 Statuses=0009 0009 13:25:29 Msec=1500 True Az=54.51 Ze=114.48 Az status=0009 Ze status=0009 13:25:29 Check angles 13:25:29 SkyScan query 13:25:29 SkyScan query done: ret=0 az=41.01<-2734 ze=93.57<-5762 Statuses=0009 0009 13:25:29 Msec=2250 True Az=41.01 Ze=93.57 Az status=0009 Ze status=0009 13:25:30 Check angles 13:25:30 SkyScan query 13:25:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.57<-7162 Statuses=0008 0009 13:25:30 Msec=3000 True Az=40.995 Ze=72.57 Az status=0008 Ze status=0009 13:25:30 Check angles 13:25:30 SkyScan query 13:25:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 13:25:31 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 13:25:31 Check angles 13:25:31 SkyScan query 13:25:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:25:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:25:32 Message to Master queued w/err=0: serial=222755 error=0 13:25:37 Received message from Master: op=Filter serial=222756 13:25:37 Color wheel filter change from 0 to 0 13:25:37 FLIGetFilterPos err=0 currentPosition=0 13:25:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:37 Filter is already there-color wheel unchanged 13:25:37 Received message from Master: op=Shutter serial=222757 13:25:37 Shutter LASER close 13:25:37 Received message from Camera: op=State serial=222759 13:25:37 GetSingleValue result=40 Value=cccccccc 13:25:37 SkyScan query 13:25:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:25:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:38 Parameters OK 13:25:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:38 Set A/D data flow result=40 13:25:38 Set A/D channel type result=40 13:25:38 Set A/D encoding result=40 13:25:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:38 Set channel filter=0.000000e+000 result=40 13:25:38 Config A/D Result=40 13:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:38 Get A/D filter: -9.255963e+061 result=40 13:25:38 Get A/D value=-858993460 result=40 13:25:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:38 Parameters OK 13:25:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:38 Set A/D data flow result=40 13:25:38 Set A/D channel type result=40 13:25:38 Set A/D encoding result=40 13:25:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:38 Set channel filter=0.000000e+000 result=40 13:25:38 Config A/D Result=40 13:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:38 Get A/D filter: -9.255963e+061 result=40 13:25:38 Get A/D value=-858993460 result=40 13:25:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:38 Aux= [UTC 2018-12-17 13:25:38] 13:25:38 Message to Camera, serial 222759 queued 13:26:14 Received message from Master: op=PointingHead serial=222772 13:26:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:26:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:26:15 Point started: ret=0 13:26:15 point_skyscan result=0 13:26:15 Check angles 13:26:15 SkyScan query 13:26:16 SkyScan query done: ret=0 az=64.185<-4279 ze=66.54<-7564 Statuses=0009 0008 13:26:16 Msec=0 True Az=64.185 Ze=66.54 Az status=0009 Ze status=0008 13:26:16 Check angles 13:26:16 SkyScan query 13:26:17 SkyScan query done: ret=0 az=81.645<-5443 ze=66.51<-7566 Statuses=0009 0008 13:26:17 Msec=750 True Az=81.645 Ze=66.51 Az status=0009 Ze status=0008 13:26:17 Check angles 13:26:17 SkyScan query 13:26:18 SkyScan query done: ret=0 az=99.675<-6645 ze=66.495<-7567 Statuses=0009 0008 13:26:18 Msec=1500 True Az=99.675 Ze=66.495 Az status=0009 Ze status=0008 13:26:18 Check angles 13:26:18 SkyScan query 13:26:18 SkyScan query done: ret=0 az=117.195<-7813 ze=66.495<-7567 Statuses=0009 0008 13:26:18 Msec=2250 True Az=117.195 Ze=66.495 Az status=0009 Ze status=0008 13:26:18 Check angles 13:26:18 SkyScan query 13:26:19 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 13:26:19 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 13:26:19 Check angles 13:26:19 SkyScan query 13:26:20 SkyScan query done: ret=0 az=152.145<-10143 ze=66.495<-7567 Statuses=0009 0008 13:26:20 Msec=3750 True Az=152.145 Ze=66.495 Az status=0009 Ze status=0008 13:26:20 Check angles 13:26:20 SkyScan query 13:26:21 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:26:21 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:26:21 Message to Master queued w/err=0: serial=222772 error=0 13:26:26 Received message from Master: op=Filter serial=222773 13:26:26 Color wheel filter change from 0 to 0 13:26:26 FLIGetFilterPos err=0 currentPosition=0 13:26:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:26 Filter is already there-color wheel unchanged 13:26:26 Received message from Master: op=Shutter serial=222774 13:26:26 Shutter LASER close 13:26:26 Received message from Camera: op=State serial=222776 13:26:26 GetSingleValue result=40 Value=cccccccc 13:26:26 SkyScan query 13:26:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:26:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:26 Parameters OK 13:26:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:26 Set A/D data flow result=40 13:26:26 Set A/D channel type result=40 13:26:26 Set A/D encoding result=40 13:26:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:26 Set channel filter=0.000000e+000 result=40 13:26:26 Config A/D Result=40 13:26:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:26 Get A/D filter: -9.255963e+061 result=40 13:26:26 Get A/D value=-858993460 result=40 13:26:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:26 Parameters OK 13:26:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:26 Set A/D data flow result=40 13:26:26 Set A/D channel type result=40 13:26:26 Set A/D encoding result=40 13:26:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:26 Set channel filter=0.000000e+000 result=40 13:26:26 Config A/D Result=40 13:26:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:26 Get A/D filter: -9.255963e+061 result=40 13:26:26 Get A/D value=-858993460 result=40 13:26:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:26 Aux= 13:26:26 Message to Camera, serial 222776 queued 13:27:03 Received message from Master: op=PointingHead serial=222789 13:27:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:27:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:27:04 Point started: ret=0 13:27:04 point_skyscan result=0 13:27:04 Check angles 13:27:04 SkyScan query 13:27:05 SkyScan query done: ret=0 az=135.135<-9009 ze=36.885<-9541 Statuses=0009 0009 13:27:05 Msec=0 True Az=135.135 Ze=36.885 Az status=0009 Ze status=0009 13:27:05 Check angles 13:27:05 SkyScan query 13:27:06 SkyScan query done: ret=0 az=117.675<-7845 ze=15.915<-10939 Statuses=0009 0009 13:27:06 Msec=750 True Az=117.675 Ze=15.915 Az status=0009 Ze status=0009 13:27:06 Check angles 13:27:06 SkyScan query 13:27:06 SkyScan query done: ret=0 az=100.305<-6687 ze=-5.025<-12335 Statuses=0009 0009 13:27:06 Msec=1500 True Az=100.305 Ze=-5.025 Az status=0009 Ze status=0009 13:27:07 Check angles 13:27:07 SkyScan query 13:27:07 SkyScan query done: ret=0 az=82.74<-5516 ze=-25.98<-13732 Statuses=0009 0009 13:27:07 Msec=2250 True Az=82.74 Ze=-25.98 Az status=0009 Ze status=0009 13:27:07 Check angles 13:27:07 SkyScan query 13:27:08 SkyScan query done: ret=0 az=65.31<-4354 ze=-38.58<-14572 Statuses=0009 0008 13:27:08 Msec=3000 True Az=65.31 Ze=-38.58 Az status=0009 Ze status=0008 13:27:08 Check angles 13:27:08 SkyScan query 13:27:09 SkyScan query done: ret=0 az=47.91<-3194 ze=-38.52<-14568 Statuses=0009 0008 13:27:09 Msec=3750 True Az=47.91 Ze=-38.52 Az status=0009 Ze status=0008 13:27:09 Check angles 13:27:09 SkyScan query 13:27:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:27:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:27:09 Message to Master queued w/err=0: serial=222789 error=0 13:27:14 Received message from Master: op=Filter serial=222790 13:27:14 Color wheel filter change from 0 to 0 13:27:14 FLIGetFilterPos err=0 currentPosition=0 13:27:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:14 Filter is already there-color wheel unchanged 13:27:15 Received message from Master: op=Shutter serial=222791 13:27:15 Shutter LASER close 13:27:15 Received message from Camera: op=State serial=222793 13:27:15 GetSingleValue result=40 Value=cccccccc 13:27:15 SkyScan query 13:27:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:27:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:15 Parameters OK 13:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:15 Set A/D data flow result=40 13:27:15 Set A/D channel type result=40 13:27:15 Set A/D encoding result=40 13:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:15 Set channel filter=0.000000e+000 result=40 13:27:15 Config A/D Result=40 13:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:15 Get A/D filter: -9.255963e+061 result=40 13:27:15 Get A/D value=-858993460 result=40 13:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:15 Parameters OK 13:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:15 Set A/D data flow result=40 13:27:15 Set A/D channel type result=40 13:27:15 Set A/D encoding result=40 13:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:15 Set channel filter=0.000000e+000 result=40 13:27:15 Config A/D Result=40 13:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:15 Get A/D filter: -9.255963e+061 result=40 13:27:15 Get A/D value=-858993460 result=40 13:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:15 Aux= 13:27:15 Message to Camera, serial 222793 queued 13:27:52 Received message from Master: op=PointingHead serial=222806 13:27:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:27:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:27:52 Point started: ret=0 13:27:52 point_skyscan result=0 13:27:53 Check angles 13:27:53 SkyScan query 13:27:54 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.67<-16578 Statuses=0009 0009 13:27:54 Msec=0 True Az=64.23 Ze=-68.67 Az status=0009 Ze status=0009 13:27:54 Check angles 13:27:54 SkyScan query 13:27:54 SkyScan query done: ret=0 az=82.17<-5478 ze=-90.06<-18004 Statuses=0009 0009 13:27:54 Msec=750 True Az=82.17 Ze=-90.06 Az status=0009 Ze status=0009 13:27:55 Check angles 13:27:55 SkyScan query 13:27:55 SkyScan query done: ret=0 az=99.6<-6640 ze=-111.015<-19401 Statuses=0009 0009 13:27:55 Msec=1500 True Az=99.6 Ze=-111.015 Az status=0009 Ze status=0009 13:27:55 Check angles 13:27:55 SkyScan query 13:27:56 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.925<-20795 Statuses=0009 0009 13:27:56 Msec=2250 True Az=117.075 Ze=-131.925 Az status=0009 Ze status=0009 13:27:56 Check angles 13:27:56 SkyScan query 13:27:57 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.555<-21437 Statuses=0009 0008 13:27:57 Msec=3000 True Az=131.1 Ze=-141.555 Az status=0009 Ze status=0008 13:27:57 Check angles 13:27:57 SkyScan query 13:27:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 13:27:57 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 13:27:57 Message to Master queued w/err=0: serial=222806 error=0 13:28:02 Received message from Master: op=Filter serial=222807 13:28:02 Color wheel filter change from 0 to 0 13:28:02 FLIGetFilterPos err=0 currentPosition=0 13:28:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:02 Filter is already there-color wheel unchanged 13:28:03 Received message from Master: op=Shutter serial=222808 13:28:03 Shutter LASER close 13:28:03 Received message from Camera: op=State serial=222810 13:28:03 GetSingleValue result=40 Value=cccccccc 13:28:03 SkyScan query 13:28:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:28:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:03 Parameters OK 13:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:03 Set A/D data flow result=40 13:28:03 Set A/D channel type result=40 13:28:03 Set A/D encoding result=40 13:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:03 Set channel filter=0.000000e+000 result=40 13:28:03 Config A/D Result=40 13:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:03 Get A/D filter: -9.255963e+061 result=40 13:28:03 Get A/D value=-858993460 result=40 13:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:03 Parameters OK 13:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:03 Set A/D data flow result=40 13:28:03 Set A/D channel type result=40 13:28:03 Set A/D encoding result=40 13:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:03 Set channel filter=0.000000e+000 result=40 13:28:03 Config A/D Result=40 13:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:03 Get A/D filter: -9.255963e+061 result=40 13:28:03 Get A/D value=-858993460 result=40 13:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:03 Aux= 13:28:03 Message to Camera, serial 222810 queued 13:28:40 Received message from Master: op=PointingHead serial=222823 13:28:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:28:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:28:40 Point started: ret=0 13:28:40 point_skyscan result=0 13:28:41 Check angles 13:28:41 SkyScan query 13:28:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 13:28:42 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 13:28:42 Check angles 13:28:42 SkyScan query 13:28:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:28:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:28:43 Message to Master queued w/err=0: serial=222823 error=0 13:28:48 Received message from Master: op=Filter serial=222824 13:28:48 Color wheel filter change from 0 to 0 13:28:48 FLIGetFilterPos err=0 currentPosition=0 13:28:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:48 Filter is already there-color wheel unchanged 13:28:48 Received message from Master: op=Shutter serial=222825 13:28:48 Shutter LASER open 13:28:48 Received message from Camera: op=State serial=222827 13:28:48 GetSingleValue result=40 Value=cccccccc 13:28:48 SkyScan query 13:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:28:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:48 Parameters OK 13:28:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:48 Set A/D data flow result=40 13:28:48 Set A/D channel type result=40 13:28:48 Set A/D encoding result=40 13:28:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:48 Set channel filter=0.000000e+000 result=40 13:28:48 Config A/D Result=40 13:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:48 Get A/D filter: -9.255963e+061 result=40 13:28:48 Get A/D value=-858993460 result=40 13:28:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:48 Parameters OK 13:28:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:48 Set A/D data flow result=40 13:28:48 Set A/D channel type result=40 13:28:48 Set A/D encoding result=40 13:28:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:48 Set channel filter=0.000000e+000 result=40 13:28:48 Config A/D Result=40 13:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:48 Get A/D filter: -9.255963e+061 result=40 13:28:48 Get A/D value=-858993460 result=40 13:28:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:48 Aux= 13:28:48 Message to Camera, serial 222827 queued 13:28:57 Received message from Master: op=Shutter serial=222837 13:28:57 Shutter LASER close 13:28:57 Received message from Master: op=PointingHead serial=222841 13:28:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:28:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:28:58 Point started: ret=0 13:28:58 point_skyscan result=0 13:28:59 Check angles 13:28:59 SkyScan query 13:28:59 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.55<-21570 Statuses=0009 0009 13:28:59 Msec=0 True Az=135.75 Ze=-143.55 Az status=0009 Ze status=0009 13:28:59 Check angles 13:28:59 SkyScan query 13:29:00 SkyScan query done: ret=0 az=153.285<-10219 ze=-122.58<-20172 Statuses=0009 0009 13:29:00 Msec=750 True Az=153.285 Ze=-122.58 Az status=0009 Ze status=0009 13:29:00 Check angles 13:29:00 SkyScan query 13:29:01 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.67<-18778 Statuses=0009 0009 13:29:01 Msec=1500 True Az=170.745 Ze=-101.67 Az status=0009 Ze status=0009 13:29:01 Check angles 13:29:01 SkyScan query 13:29:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.61<-17374 Statuses=0008 0009 13:29:01 Msec=2250 True Az=175.995 Ze=-80.61 Az status=0008 Ze status=0009 13:29:02 Check angles 13:29:02 SkyScan query 13:29:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.67<-15978 Statuses=0008 0009 13:29:02 Msec=3000 True Az=175.995 Ze=-59.67 Az status=0008 Ze status=0009 13:29:02 Check angles 13:29:02 SkyScan query 13:29:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:29:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:29:03 Message to Master queued w/err=0: serial=222841 error=0 13:29:08 Received message from Master: op=Filter serial=222842 13:29:08 Color wheel filter change from 0 to 0 13:29:08 FLIGetFilterPos err=0 currentPosition=0 13:29:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:08 Filter is already there-color wheel unchanged 13:29:08 Received message from Master: op=Shutter serial=222843 13:29:08 Shutter LASER close 13:29:08 Received message from Camera: op=State serial=222845 13:29:08 GetSingleValue result=40 Value=cccccccc 13:29:08 SkyScan query 13:29:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:29:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:09 Parameters OK 13:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:09 Set A/D data flow result=40 13:29:09 Set A/D channel type result=40 13:29:09 Set A/D encoding result=40 13:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:09 Set channel filter=0.000000e+000 result=40 13:29:09 Config A/D Result=40 13:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:09 Get A/D filter: -9.255963e+061 result=40 13:29:09 Get A/D value=-858993460 result=40 13:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:09 Parameters OK 13:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:09 Set A/D data flow result=40 13:29:09 Set A/D channel type result=40 13:29:09 Set A/D encoding result=40 13:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:09 Set channel filter=0.000000e+000 result=40 13:29:09 Config A/D Result=40 13:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:09 Get A/D filter: -9.255963e+061 result=40 13:29:09 Get A/D value=-858993460 result=40 13:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:09 Aux= 13:29:09 Message to Camera, serial 222845 queued 13:29:46 Received message from Master: op=PointingHead serial=222858 13:29:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:29:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:29:46 Point started: ret=0 13:29:46 point_skyscan result=0 13:29:47 Check angles 13:29:47 SkyScan query 13:29:47 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.81<-13454 Statuses=0009 0009 13:29:47 Msec=0 True Az=152.94 Ze=-21.81 Az status=0009 Ze status=0009 13:29:48 Check angles 13:29:48 SkyScan query 13:29:48 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.33<-12022 Statuses=0009 0009 13:29:48 Msec=750 True Az=135.105 Ze=-0.33 Az status=0009 Ze status=0009 13:29:48 Check angles 13:29:48 SkyScan query 13:29:49 SkyScan query done: ret=0 az=117.285<-7819 ze=21<-10600 Statuses=0009 0009 13:29:49 Msec=1500 True Az=117.285 Ze=21 Az status=0009 Ze status=0009 13:29:49 Check angles 13:29:49 SkyScan query 13:29:50 SkyScan query done: ret=0 az=99.9<-6660 ze=41.955<-9203 Statuses=0009 0009 13:29:50 Msec=2250 True Az=99.9 Ze=41.955 Az status=0009 Ze status=0009 13:29:50 Check angles 13:29:50 SkyScan query 13:29:50 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 13:29:50 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 13:29:51 Check angles 13:29:51 SkyScan query 13:29:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:29:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:29:51 Message to Master queued w/err=0: serial=222858 error=0 13:29:56 Received message from Master: op=Filter serial=222859 13:29:56 Color wheel filter change from 0 to 0 13:29:56 FLIGetFilterPos err=0 currentPosition=0 13:29:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:56 Filter is already there-color wheel unchanged 13:29:56 Received message from Master: op=Shutter serial=222860 13:29:56 Shutter LASER close 13:29:56 Received message from Camera: op=State serial=222862 13:29:56 GetSingleValue result=40 Value=cccccccc 13:29:56 SkyScan query 13:29:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:29:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:57 Parameters OK 13:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:57 Set A/D data flow result=40 13:29:57 Set A/D channel type result=40 13:29:57 Set A/D encoding result=40 13:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:57 Set channel filter=0.000000e+000 result=40 13:29:57 Config A/D Result=40 13:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:57 Get A/D filter: -9.255963e+061 result=40 13:29:57 Get A/D value=-858993460 result=40 13:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:57 Parameters OK 13:29:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:57 Set A/D data flow result=40 13:29:57 Set A/D channel type result=40 13:29:57 Set A/D encoding result=40 13:29:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:57 Set channel filter=0.000000e+000 result=40 13:29:57 Config A/D Result=40 13:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:57 Get A/D filter: -9.255963e+061 result=40 13:29:57 Get A/D value=-858993460 result=40 13:29:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:57 Aux= 13:29:57 Message to Camera, serial 222862 queued 13:30:34 Received message from Master: op=PointingHead serial=222875 13:30:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:30:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:30:34 Point started: ret=0 13:30:34 point_skyscan result=0 13:30:35 Check angles 13:30:35 SkyScan query 13:30:35 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 13:30:35 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 13:30:36 Check angles 13:30:36 SkyScan query 13:30:36 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 13:30:36 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 13:30:36 Check angles 13:30:36 SkyScan query 13:30:37 SkyScan query done: ret=0 az=144.015<-9601 ze=38.505<-9433 Statuses=0009 0008 13:30:37 Msec=1500 True Az=144.015 Ze=38.505 Az status=0009 Ze status=0008 13:30:37 Check angles 13:30:37 SkyScan query 13:30:38 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 13:30:38 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 13:30:38 Check angles 13:30:38 SkyScan query 13:30:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:30:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:30:39 Check angles 13:30:39 SkyScan query 13:30:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:30:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:30:39 Message to Master queued w/err=0: serial=222875 error=0 13:30:44 Received message from Master: op=Filter serial=222876 13:30:44 Color wheel filter change from 0 to 0 13:30:44 FLIGetFilterPos err=0 currentPosition=0 13:30:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:44 Filter is already there-color wheel unchanged 13:30:44 Received message from Master: op=Shutter serial=222877 13:30:44 Shutter LASER close 13:30:44 Received message from Camera: op=State serial=222879 13:30:44 GetSingleValue result=40 Value=cccccccc 13:30:44 SkyScan query 13:30:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:30:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:45 Parameters OK 13:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:45 Set A/D data flow result=40 13:30:45 Set A/D channel type result=40 13:30:45 Set A/D encoding result=40 13:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:45 Set channel filter=0.000000e+000 result=40 13:30:45 Config A/D Result=40 13:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:45 Get A/D filter: -9.255963e+061 result=40 13:30:45 Get A/D value=-858993460 result=40 13:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:45 Parameters OK 13:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:45 Set A/D data flow result=40 13:30:45 Set A/D channel type result=40 13:30:45 Set A/D encoding result=40 13:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:45 Set channel filter=0.000000e+000 result=40 13:30:45 Config A/D Result=40 13:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:45 Get A/D filter: -9.255963e+061 result=40 13:30:45 Get A/D value=-858993460 result=40 13:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:45 Aux= 13:30:45 Message to Camera, serial 222879 queued 13:31:22 Received message from Master: op=PointingHead serial=222892 13:31:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:31:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:31:22 Point started: ret=0 13:31:22 point_skyscan result=0 13:31:23 Check angles 13:31:23 SkyScan query 13:31:24 SkyScan query done: ret=0 az=152.775<-10185 ze=8.52<-11432 Statuses=0009 0009 13:31:24 Msec=0 True Az=152.775 Ze=8.52 Az status=0009 Ze status=0009 13:31:24 Check angles 13:31:24 SkyScan query 13:31:24 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.42<-12828 Statuses=0009 0009 13:31:24 Msec=750 True Az=135.375 Ze=-12.42 Az status=0009 Ze status=0009 13:31:24 Check angles 13:31:24 SkyScan query 13:31:25 SkyScan query done: ret=0 az=117.885<-7859 ze=-33.36<-14224 Statuses=0009 0009 13:31:25 Msec=1500 True Az=117.885 Ze=-33.36 Az status=0009 Ze status=0009 13:31:25 Check angles 13:31:25 SkyScan query 13:31:26 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.54<-15436 Statuses=0009 0009 13:31:26 Msec=2250 True Az=100.485 Ze=-51.54 Az status=0009 Ze status=0009 13:31:26 Check angles 13:31:26 SkyScan query 13:31:27 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:31:27 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:31:27 Check angles 13:31:27 SkyScan query 13:31:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:31:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:31:27 Message to Master queued w/err=0: serial=222892 error=0 13:31:32 Received message from Master: op=Filter serial=222893 13:31:32 Color wheel filter change from 0 to 0 13:31:32 FLIGetFilterPos err=0 currentPosition=0 13:31:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:32 Filter is already there-color wheel unchanged 13:31:32 Received message from Master: op=Shutter serial=222894 13:31:32 Shutter LASER close 13:31:33 Received message from Camera: op=State serial=222896 13:31:33 GetSingleValue result=40 Value=cccccccc 13:31:33 SkyScan query 13:31:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:31:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:33 Parameters OK 13:31:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:33 Set A/D data flow result=40 13:31:33 Set A/D channel type result=40 13:31:33 Set A/D encoding result=40 13:31:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:33 Set channel filter=0.000000e+000 result=40 13:31:33 Config A/D Result=40 13:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:33 Get A/D filter: -9.255963e+061 result=40 13:31:33 Get A/D value=-858993460 result=40 13:31:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:33 Parameters OK 13:31:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:33 Set A/D data flow result=40 13:31:33 Set A/D channel type result=40 13:31:33 Set A/D encoding result=40 13:31:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:33 Set channel filter=0.000000e+000 result=40 13:31:33 Config A/D Result=40 13:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:33 Get A/D filter: -9.255963e+061 result=40 13:31:33 Get A/D value=-858993460 result=40 13:31:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:33 Aux= 13:31:33 Message to Camera, serial 222896 queued 13:32:10 Received message from Master: op=PointingHead serial=222909 13:32:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:32:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:32:10 Point started: ret=0 13:32:10 point_skyscan result=0 13:32:11 Check angles 13:32:11 SkyScan query 13:32:12 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.33<-17422 Statuses=0009 0009 13:32:12 Msec=0 True Az=109.155 Ze=-81.33 Az status=0009 Ze status=0009 13:32:12 Check angles 13:32:12 SkyScan query 13:32:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 13:32:12 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 13:32:13 Check angles 13:32:13 SkyScan query 13:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 13:32:13 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 13:32:13 Check angles 13:32:13 SkyScan query 13:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.255<-21617 Statuses=0008 0009 13:32:14 Msec=2250 True Az=112.995 Ze=-144.255 Az status=0008 Ze status=0009 13:32:14 Check angles 13:32:14 SkyScan query 13:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.18<-23012 Statuses=0008 0009 13:32:15 Msec=3000 True Az=112.995 Ze=-165.18 Az status=0008 Ze status=0009 13:32:15 Check angles 13:32:15 SkyScan query 13:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:32:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:32:15 Message to Master queued w/err=0: serial=222909 error=0 13:32:20 Received message from Master: op=Filter serial=222910 13:32:20 Color wheel filter change from 0 to 0 13:32:20 FLIGetFilterPos err=0 currentPosition=0 13:32:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:20 Filter is already there-color wheel unchanged 13:32:21 Received message from Master: op=Shutter serial=222911 13:32:21 Shutter LASER open 13:32:21 Received message from Camera: op=State serial=222913 13:32:21 GetSingleValue result=40 Value=cccccccc 13:32:21 SkyScan query 13:32:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:32:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:21 Parameters OK 13:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:21 Set A/D data flow result=40 13:32:21 Set A/D channel type result=40 13:32:21 Set A/D encoding result=40 13:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:21 Set channel filter=0.000000e+000 result=40 13:32:21 Config A/D Result=40 13:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:21 Get A/D filter: -9.255963e+061 result=40 13:32:21 Get A/D value=-858993460 result=40 13:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:21 Parameters OK 13:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:21 Set A/D data flow result=40 13:32:21 Set A/D channel type result=40 13:32:21 Set A/D encoding result=40 13:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:21 Set channel filter=0.000000e+000 result=40 13:32:21 Config A/D Result=40 13:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:21 Get A/D filter: -9.255963e+061 result=40 13:32:21 Get A/D value=-858993460 result=40 13:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:21 Aux= 13:32:21 Message to Camera, serial 222913 queued 13:32:30 Received message from Master: op=Shutter serial=222923 13:32:30 Shutter LASER close 13:32:30 Received message from Master: op=PointingHead serial=222927 13:32:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:32:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:32:31 Point started: ret=0 13:32:31 point_skyscan result=0 13:32:31 Check angles 13:32:31 SkyScan query 13:32:32 SkyScan query done: ret=0 az=89.88<-5992 ze=157.29<-1514 Statuses=0009 0009 13:32:32 Msec=0 True Az=89.88 Ze=157.29 Az status=0009 Ze status=0009 13:32:32 Check angles 13:32:32 SkyScan query 13:32:33 SkyScan query done: ret=0 az=72.06<-4804 ze=135.9<-2940 Statuses=0009 0009 13:32:33 Msec=750 True Az=72.06 Ze=135.9 Az status=0009 Ze status=0009 13:32:33 Check angles 13:32:33 SkyScan query 13:32:33 SkyScan query done: ret=0 az=54.825<-3655 ze=114.93<-4338 Statuses=0009 0009 13:32:33 Msec=1500 True Az=54.825 Ze=114.93 Az status=0009 Ze status=0009 13:32:34 Check angles 13:32:34 SkyScan query 13:32:34 SkyScan query done: ret=0 az=41.01<-2734 ze=93.96<-5736 Statuses=0009 0009 13:32:34 Msec=2250 True Az=41.01 Ze=93.96 Az status=0009 Ze status=0009 13:32:34 Check angles 13:32:34 SkyScan query 13:32:35 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 13:32:35 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 13:32:35 Check angles 13:32:35 SkyScan query 13:32:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 13:32:36 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 13:32:36 Check angles 13:32:36 SkyScan query 13:32:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:32:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:32:36 Message to Master queued w/err=0: serial=222927 error=0 13:32:41 Received message from Master: op=Filter serial=222928 13:32:41 Color wheel filter change from 0 to 0 13:32:41 FLIGetFilterPos err=0 currentPosition=0 13:32:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:41 Filter is already there-color wheel unchanged 13:32:42 Received message from Master: op=Shutter serial=222929 13:32:42 Shutter LASER close 13:32:42 Received message from Camera: op=State serial=222931 13:32:42 GetSingleValue result=40 Value=cccccccc 13:32:42 SkyScan query 13:32:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:32:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:42 Parameters OK 13:32:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:42 Set A/D data flow result=40 13:32:42 Set A/D channel type result=40 13:32:42 Set A/D encoding result=40 13:32:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:42 Set channel filter=0.000000e+000 result=40 13:32:42 Config A/D Result=40 13:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:42 Get A/D filter: -9.255963e+061 result=40 13:32:42 Get A/D value=-858993460 result=40 13:32:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:42 Parameters OK 13:32:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:42 Set A/D data flow result=40 13:32:42 Set A/D channel type result=40 13:32:42 Set A/D encoding result=40 13:32:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:42 Set channel filter=0.000000e+000 result=40 13:32:42 Config A/D Result=40 13:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:42 Get A/D filter: -9.255963e+061 result=40 13:32:42 Get A/D value=-858993460 result=40 13:32:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:42 Aux= 13:32:42 Message to Camera, serial 222931 queued 13:33:19 Received message from Master: op=PointingHead serial=222944 13:33:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:33:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:33:19 Point started: ret=0 13:33:19 point_skyscan result=0 13:33:20 Check angles 13:33:20 SkyScan query 13:33:21 SkyScan query done: ret=0 az=64.05<-4270 ze=66.555<-7563 Statuses=0009 0008 13:33:21 Msec=0 True Az=64.05 Ze=66.555 Az status=0009 Ze status=0008 13:33:21 Check angles 13:33:21 SkyScan query 13:33:22 SkyScan query done: ret=0 az=81.87<-5458 ze=66.495<-7567 Statuses=0009 0008 13:33:22 Msec=750 True Az=81.87 Ze=66.495 Az status=0009 Ze status=0008 13:33:22 Check angles 13:33:22 SkyScan query 13:33:22 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 13:33:22 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 13:33:23 Check angles 13:33:23 SkyScan query 13:33:23 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 13:33:23 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 13:33:23 Check angles 13:33:23 SkyScan query 13:33:24 SkyScan query done: ret=0 az=134.205<-8947 ze=66.495<-7567 Statuses=0009 0008 13:33:24 Msec=3000 True Az=134.205 Ze=66.495 Az status=0009 Ze status=0008 13:33:24 Check angles 13:33:24 SkyScan query 13:33:25 SkyScan query done: ret=0 az=151.635<-10109 ze=66.495<-7567 Statuses=0009 0008 13:33:25 Msec=3750 True Az=151.635 Ze=66.495 Az status=0009 Ze status=0008 13:33:25 Check angles 13:33:25 SkyScan query 13:33:25 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 13:33:25 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 13:33:25 Message to Master queued w/err=0: serial=222944 error=0 13:33:30 Received message from Master: op=Filter serial=222945 13:33:30 Color wheel filter change from 0 to 0 13:33:30 FLIGetFilterPos err=0 currentPosition=0 13:33:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:30 Filter is already there-color wheel unchanged 13:33:31 Received message from Master: op=Shutter serial=222946 13:33:31 Shutter LASER close 13:33:31 Received message from Camera: op=State serial=222948 13:33:31 GetSingleValue result=40 Value=cccccccc 13:33:31 SkyScan query 13:33:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:33:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:31 Parameters OK 13:33:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:31 Set A/D data flow result=40 13:33:31 Set A/D channel type result=40 13:33:31 Set A/D encoding result=40 13:33:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:31 Set channel filter=0.000000e+000 result=40 13:33:31 Config A/D Result=40 13:33:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:31 Get A/D filter: -9.255963e+061 result=40 13:33:31 Get A/D value=-858993460 result=40 13:33:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:31 Parameters OK 13:33:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:31 Set A/D data flow result=40 13:33:31 Set A/D channel type result=40 13:33:31 Set A/D encoding result=40 13:33:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:31 Set channel filter=0.000000e+000 result=40 13:33:31 Config A/D Result=40 13:33:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:31 Get A/D filter: -9.255963e+061 result=40 13:33:31 Get A/D value=-858993460 result=40 13:33:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:31 Aux= 13:33:31 Message to Camera, serial 222948 queued 13:34:08 Received message from Master: op=PointingHead serial=222961 13:34:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:34:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:34:08 Point started: ret=0 13:34:08 point_skyscan result=0 13:34:09 Check angles 13:34:09 SkyScan query 13:34:10 SkyScan query done: ret=0 az=135.12<-9008 ze=36.855<-9543 Statuses=0009 0009 13:34:10 Msec=0 True Az=135.12 Ze=36.855 Az status=0009 Ze status=0009 13:34:10 Check angles 13:34:10 SkyScan query 13:34:10 SkyScan query done: ret=0 az=117.27<-7818 ze=15.525<-10965 Statuses=0009 0009 13:34:10 Msec=750 True Az=117.27 Ze=15.525 Az status=0009 Ze status=0009 13:34:11 Check angles 13:34:11 SkyScan query 13:34:11 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.475<-12365 Statuses=0009 0009 13:34:11 Msec=1500 True Az=99.915 Ze=-5.475 Az status=0009 Ze status=0009 13:34:11 Check angles 13:34:11 SkyScan query 13:34:12 SkyScan query done: ret=0 az=82.38<-5492 ze=-26.43<-13762 Statuses=0009 0009 13:34:12 Msec=2250 True Az=82.38 Ze=-26.43 Az status=0009 Ze status=0009 13:34:12 Check angles 13:34:12 SkyScan query 13:34:13 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.58<-14572 Statuses=0009 0008 13:34:13 Msec=3000 True Az=64.5 Ze=-38.58 Az status=0009 Ze status=0008 13:34:13 Check angles 13:34:13 SkyScan query 13:34:13 SkyScan query done: ret=0 az=46.845<-3123 ze=-38.52<-14568 Statuses=0009 0008 13:34:13 Msec=3750 True Az=46.845 Ze=-38.52 Az status=0009 Ze status=0008 13:34:14 Check angles 13:34:14 SkyScan query 13:34:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:34:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:34:14 Message to Master queued w/err=0: serial=222961 error=0 13:34:19 Received message from Master: op=Filter serial=222962 13:34:19 Color wheel filter change from 0 to 0 13:34:19 FLIGetFilterPos err=0 currentPosition=0 13:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:19 Filter is already there-color wheel unchanged 13:34:19 Received message from Master: op=Shutter serial=222963 13:34:19 Shutter LASER close 13:34:19 Received message from Camera: op=State serial=222965 13:34:19 GetSingleValue result=40 Value=cccccccc 13:34:19 SkyScan query 13:34:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:20 Parameters OK 13:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:20 Set A/D data flow result=40 13:34:20 Set A/D channel type result=40 13:34:20 Set A/D encoding result=40 13:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:20 Set channel filter=0.000000e+000 result=40 13:34:20 Config A/D Result=40 13:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:20 Get A/D filter: -9.255963e+061 result=40 13:34:20 Get A/D value=-858993460 result=40 13:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:20 Parameters OK 13:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:20 Set A/D data flow result=40 13:34:20 Set A/D channel type result=40 13:34:20 Set A/D encoding result=40 13:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:20 Set channel filter=0.000000e+000 result=40 13:34:20 Config A/D Result=40 13:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:20 Get A/D filter: -9.255963e+061 result=40 13:34:20 Get A/D value=-858993460 result=40 13:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:20 Aux= 13:34:20 Message to Camera, serial 222965 queued 13:34:57 Received message from Master: op=PointingHead serial=222978 13:34:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:34:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:34:57 Point started: ret=0 13:34:57 point_skyscan result=0 13:34:58 Check angles 13:34:58 SkyScan query 13:34:59 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.835<-16589 Statuses=0009 0009 13:34:59 Msec=0 True Az=64.44 Ze=-68.835 Az status=0009 Ze status=0009 13:34:59 Check angles 13:34:59 SkyScan query 13:34:59 SkyScan query done: ret=0 az=82.275<-5485 ze=-90.21<-18014 Statuses=0009 0009 13:34:59 Msec=750 True Az=82.275 Ze=-90.21 Az status=0009 Ze status=0009 13:35:00 Check angles 13:35:00 SkyScan query 13:35:00 SkyScan query done: ret=0 az=99.87<-6658 ze=-111.165<-19411 Statuses=0009 0009 13:35:00 Msec=1500 True Az=99.87 Ze=-111.165 Az status=0009 Ze status=0009 13:35:00 Check angles 13:35:00 SkyScan query 13:35:01 SkyScan query done: ret=0 az=117.36<-7824 ze=-132.09<-20806 Statuses=0009 0009 13:35:01 Msec=2250 True Az=117.36 Ze=-132.09 Az status=0009 Ze status=0009 13:35:01 Check angles 13:35:01 SkyScan query 13:35:02 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 13:35:02 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 13:35:02 Check angles 13:35:02 SkyScan query 13:35:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:35:02 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:35:02 Message to Master queued w/err=0: serial=222978 error=0 13:35:07 Received message from Master: op=Filter serial=222979 13:35:07 Color wheel filter change from 0 to 0 13:35:07 FLIGetFilterPos err=0 currentPosition=0 13:35:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:07 Filter is already there-color wheel unchanged 13:35:08 Received message from Master: op=Shutter serial=222980 13:35:08 Shutter LASER close 13:35:08 Received message from Camera: op=State serial=222982 13:35:08 GetSingleValue result=40 Value=cccccccc 13:35:08 SkyScan query 13:35:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:35:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:08 Parameters OK 13:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:08 Set A/D data flow result=40 13:35:08 Set A/D channel type result=40 13:35:08 Set A/D encoding result=40 13:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:08 Set channel filter=0.000000e+000 result=40 13:35:08 Config A/D Result=40 13:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:08 Get A/D filter: -9.255963e+061 result=40 13:35:08 Get A/D value=-858993460 result=40 13:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:08 Parameters OK 13:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:08 Set A/D data flow result=40 13:35:08 Set A/D channel type result=40 13:35:08 Set A/D encoding result=40 13:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:08 Set channel filter=0.000000e+000 result=40 13:35:08 Config A/D Result=40 13:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:08 Get A/D filter: -9.255963e+061 result=40 13:35:08 Get A/D value=-858993460 result=40 13:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:08 Aux= 13:35:08 Message to Camera, serial 222982 queued 13:35:45 Received message from Master: op=PointingHead serial=222995 13:35:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:35:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:35:45 Point started: ret=0 13:35:45 point_skyscan result=0 13:35:46 Check angles 13:35:46 SkyScan query 13:35:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 13:35:47 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 13:35:47 Check angles 13:35:47 SkyScan query 13:35:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:35:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:35:47 Message to Master queued w/err=0: serial=222995 error=0 [UTC 2018-12-17 13:35:52] 13:35:52 Received message from Master: op=Filter serial=222996 13:35:52 Color wheel filter change from 0 to 0 13:35:52 FLIGetFilterPos err=0 currentPosition=0 13:35:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:52 Filter is already there-color wheel unchanged 13:35:53 Received message from Master: op=Shutter serial=222997 13:35:53 Shutter LASER open 13:35:53 Received message from Camera: op=State serial=222999 13:35:53 GetSingleValue result=40 Value=cccccccc 13:35:53 SkyScan query 13:35:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:35:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:53 Parameters OK 13:35:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:53 Set A/D data flow result=40 13:35:53 Set A/D channel type result=40 13:35:53 Set A/D encoding result=40 13:35:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:53 Set channel filter=0.000000e+000 result=40 13:35:53 Config A/D Result=40 13:35:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:53 Get A/D filter: -9.255963e+061 result=40 13:35:53 Get A/D value=-858993460 result=40 13:35:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:53 Parameters OK 13:35:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:53 Set A/D data flow result=40 13:35:53 Set A/D channel type result=40 13:35:53 Set A/D encoding result=40 13:35:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:53 Set channel filter=0.000000e+000 result=40 13:35:53 Config A/D Result=40 13:35:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:53 Get A/D filter: -9.255963e+061 result=40 13:35:53 Get A/D value=-858993460 result=40 13:35:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:53 Aux= 13:35:53 Message to Camera, serial 222999 queued 13:36:02 Received message from Master: op=Shutter serial=223009 13:36:02 Shutter LASER close 13:36:02 Received message from Master: op=PointingHead serial=223013 13:36:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:36:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:36:03 Point started: ret=0 13:36:03 point_skyscan result=0 13:36:04 Check angles 13:36:04 SkyScan query 13:36:04 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.65<-21510 Statuses=0009 0009 13:36:04 Msec=0 True Az=136.41 Ze=-142.65 Az status=0009 Ze status=0009 13:36:04 Check angles 13:36:04 SkyScan query 13:36:05 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.71<-20114 Statuses=0009 0009 13:36:05 Msec=750 True Az=153.96 Ze=-121.71 Az status=0009 Ze status=0009 13:36:05 Check angles 13:36:05 SkyScan query 13:36:06 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.71<-18714 Statuses=0009 0009 13:36:06 Msec=1500 True Az=171.42 Ze=-100.71 Az status=0009 Ze status=0009 13:36:06 Check angles 13:36:06 SkyScan query 13:36:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.83<-17322 Statuses=0008 0009 13:36:06 Msec=2250 True Az=175.995 Ze=-79.83 Az status=0008 Ze status=0009 13:36:07 Check angles 13:36:07 SkyScan query 13:36:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.845<-15923 Statuses=0008 0009 13:36:07 Msec=3000 True Az=175.995 Ze=-58.845 Az status=0008 Ze status=0009 13:36:07 Check angles 13:36:07 SkyScan query 13:36:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:36:08 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:36:08 Message to Master queued w/err=0: serial=223013 error=0 13:36:13 Received message from Master: op=Filter serial=223014 13:36:13 Color wheel filter change from 0 to 0 13:36:13 FLIGetFilterPos err=0 currentPosition=0 13:36:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:13 Filter is already there-color wheel unchanged 13:36:13 Received message from Master: op=Shutter serial=223015 13:36:13 Shutter LASER close 13:36:13 Received message from Camera: op=State serial=223017 13:36:13 GetSingleValue result=40 Value=cccccccc 13:36:13 SkyScan query 13:36:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:36:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:14 Parameters OK 13:36:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:14 Set A/D data flow result=40 13:36:14 Set A/D channel type result=40 13:36:14 Set A/D encoding result=40 13:36:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:14 Set channel filter=0.000000e+000 result=40 13:36:14 Config A/D Result=40 13:36:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:14 Get A/D filter: -9.255963e+061 result=40 13:36:14 Get A/D value=-858993460 result=40 13:36:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:14 Parameters OK 13:36:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:14 Set A/D data flow result=40 13:36:14 Set A/D channel type result=40 13:36:14 Set A/D encoding result=40 13:36:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:14 Set channel filter=0.000000e+000 result=40 13:36:14 Config A/D Result=40 13:36:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:14 Get A/D filter: -9.255963e+061 result=40 13:36:14 Get A/D value=-858993460 result=40 13:36:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:14 Aux= 13:36:14 Message to Camera, serial 223017 queued 13:36:50 Received message from Master: op=PointingHead serial=223029 13:36:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:36:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:36:50 Point started: ret=0 13:36:50 point_skyscan result=0 13:36:51 Check angles 13:36:51 SkyScan query 13:36:51 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.78<-13452 Statuses=0009 0009 13:36:51 Msec=0 True Az=152.94 Ze=-21.78 Az status=0009 Ze status=0009 13:36:52 Check angles 13:36:52 SkyScan query 13:36:52 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.78<-12052 Statuses=0009 0009 13:36:52 Msec=750 True Az=135.42 Ze=-0.78 Az status=0009 Ze status=0009 13:36:52 Check angles 13:36:52 SkyScan query 13:36:53 SkyScan query done: ret=0 az=117.99<-7866 ze=20.145<-10657 Statuses=0009 0009 13:36:53 Msec=1500 True Az=117.99 Ze=20.145 Az status=0009 Ze status=0009 13:36:53 Check angles 13:36:53 SkyScan query 13:36:54 SkyScan query done: ret=0 az=100.485<-6699 ze=41.115<-9259 Statuses=0009 0009 13:36:54 Msec=2250 True Az=100.485 Ze=41.115 Az status=0009 Ze status=0009 13:36:54 Check angles 13:36:54 SkyScan query 13:36:54 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 13:36:54 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 13:36:55 Check angles 13:36:55 SkyScan query 13:36:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:36:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:36:55 Message to Master queued w/err=0: serial=223029 error=0 13:37:00 Received message from Master: op=Filter serial=223030 13:37:00 Color wheel filter change from 0 to 0 13:37:00 FLIGetFilterPos err=0 currentPosition=0 13:37:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:00 Filter is already there-color wheel unchanged 13:37:00 Received message from Master: op=Shutter serial=223031 13:37:00 Shutter LASER close 13:37:00 Received message from Camera: op=State serial=223033 13:37:00 GetSingleValue result=40 Value=cccccccc 13:37:00 SkyScan query 13:37:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:37:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:01 Parameters OK 13:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:01 Set A/D data flow result=40 13:37:01 Set A/D channel type result=40 13:37:01 Set A/D encoding result=40 13:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:01 Set channel filter=0.000000e+000 result=40 13:37:01 Config A/D Result=40 13:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:01 Get A/D filter: -9.255963e+061 result=40 13:37:01 Get A/D value=-858993460 result=40 13:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:01 Parameters OK 13:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:01 Set A/D data flow result=40 13:37:01 Set A/D channel type result=40 13:37:01 Set A/D encoding result=40 13:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:01 Set channel filter=0.000000e+000 result=40 13:37:01 Config A/D Result=40 13:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:01 Get A/D filter: -9.255963e+061 result=40 13:37:01 Get A/D value=-858993460 result=40 13:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:01 Aux= 13:37:01 Message to Camera, serial 223033 queued 13:37:38 Received message from Master: op=PointingHead serial=223046 13:37:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:37:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:37:38 Point started: ret=0 13:37:38 point_skyscan result=0 13:37:39 Check angles 13:37:39 SkyScan query 13:37:39 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 13:37:39 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 13:37:40 Check angles 13:37:40 SkyScan query 13:37:40 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 13:37:40 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 13:37:40 Check angles 13:37:40 SkyScan query 13:37:41 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 13:37:41 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 13:37:41 Check angles 13:37:41 SkyScan query 13:37:42 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 13:37:42 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 13:37:42 Check angles 13:37:42 SkyScan query 13:37:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:37:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:37:43 Check angles 13:37:43 SkyScan query 13:37:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:37:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:37:43 Message to Master queued w/err=0: serial=223046 error=0 13:37:48 Received message from Master: op=Filter serial=223047 13:37:48 Color wheel filter change from 0 to 0 13:37:48 FLIGetFilterPos err=0 currentPosition=0 13:37:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:48 Filter is already there-color wheel unchanged 13:37:48 Received message from Master: op=Shutter serial=223048 13:37:48 Shutter LASER close 13:37:48 Received message from Camera: op=State serial=223050 13:37:48 GetSingleValue result=40 Value=cccccccc 13:37:48 SkyScan query 13:37:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:37:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:49 Parameters OK 13:37:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:49 Set A/D data flow result=40 13:37:49 Set A/D channel type result=40 13:37:49 Set A/D encoding result=40 13:37:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:49 Set channel filter=0.000000e+000 result=40 13:37:49 Config A/D Result=40 13:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:49 Get A/D filter: -9.255963e+061 result=40 13:37:49 Get A/D value=-858993460 result=40 13:37:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:49 Parameters OK 13:37:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:49 Set A/D data flow result=40 13:37:49 Set A/D channel type result=40 13:37:49 Set A/D encoding result=40 13:37:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:49 Set channel filter=0.000000e+000 result=40 13:37:49 Config A/D Result=40 13:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:49 Get A/D filter: -9.255963e+061 result=40 13:37:49 Get A/D value=-858993460 result=40 13:37:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:49 Aux= 13:37:49 Message to Camera, serial 223050 queued 13:38:26 Received message from Master: op=PointingHead serial=223063 13:38:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:38:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:38:26 Point started: ret=0 13:38:26 point_skyscan result=0 13:38:27 Check angles 13:38:27 SkyScan query 13:38:27 SkyScan query done: ret=0 az=152.97<-10198 ze=8.805<-11413 Statuses=0009 0009 13:38:27 Msec=0 True Az=152.97 Ze=8.805 Az status=0009 Ze status=0009 13:38:28 Check angles 13:38:28 SkyScan query 13:38:28 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.18<-12812 Statuses=0009 0009 13:38:28 Msec=750 True Az=135.42 Ze=-12.18 Az status=0009 Ze status=0009 13:38:28 Check angles 13:38:28 SkyScan query 13:38:29 SkyScan query done: ret=0 az=117.975<-7865 ze=-33.09<-14206 Statuses=0009 0009 13:38:29 Msec=1500 True Az=117.975 Ze=-33.09 Az status=0009 Ze status=0009 13:38:29 Check angles 13:38:29 SkyScan query 13:38:30 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.555<-15437 Statuses=0009 0009 13:38:30 Msec=2250 True Az=100.26 Ze=-51.555 Az status=0009 Ze status=0009 13:38:30 Check angles 13:38:30 SkyScan query 13:38:30 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 13:38:30 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 13:38:31 Check angles 13:38:31 SkyScan query 13:38:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:38:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:38:31 Message to Master queued w/err=0: serial=223063 error=0 13:38:36 Received message from Master: op=Filter serial=223064 13:38:36 Color wheel filter change from 0 to 0 13:38:36 FLIGetFilterPos err=0 currentPosition=0 13:38:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:36 Filter is already there-color wheel unchanged 13:38:36 Received message from Master: op=Shutter serial=223065 13:38:36 Shutter LASER close 13:38:36 Received message from Camera: op=State serial=223067 13:38:36 GetSingleValue result=40 Value=cccccccc 13:38:36 SkyScan query 13:38:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:38:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:37 Parameters OK 13:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:37 Set A/D data flow result=40 13:38:37 Set A/D channel type result=40 13:38:37 Set A/D encoding result=40 13:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:37 Set channel filter=0.000000e+000 result=40 13:38:37 Config A/D Result=40 13:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:37 Get A/D filter: -9.255963e+061 result=40 13:38:37 Get A/D value=-858993460 result=40 13:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:37 Parameters OK 13:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:37 Set A/D data flow result=40 13:38:37 Set A/D channel type result=40 13:38:37 Set A/D encoding result=40 13:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:37 Set channel filter=0.000000e+000 result=40 13:38:37 Config A/D Result=40 13:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:37 Get A/D filter: -9.255963e+061 result=40 13:38:37 Get A/D value=-858993460 result=40 13:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:37 Aux= 13:38:37 Message to Camera, serial 223067 queued 13:39:14 Received message from Master: op=PointingHead serial=223080 13:39:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:39:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:39:14 Point started: ret=0 13:39:14 point_skyscan result=0 13:39:15 Check angles 13:39:15 SkyScan query 13:39:16 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.15<-17410 Statuses=0009 0009 13:39:16 Msec=0 True Az=108.93 Ze=-81.15 Az status=0009 Ze status=0009 13:39:16 Check angles 13:39:16 SkyScan query 13:39:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 13:39:16 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 13:39:16 Check angles 13:39:16 SkyScan query 13:39:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 13:39:17 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 13:39:17 Check angles 13:39:17 SkyScan query 13:39:18 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.48<-21632 Statuses=0008 0009 13:39:18 Msec=2250 True Az=112.98 Ze=-144.48 Az status=0008 Ze status=0009 13:39:18 Check angles 13:39:18 SkyScan query 13:39:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 13:39:19 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 13:39:19 Check angles 13:39:19 SkyScan query 13:39:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:39:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:39:19 Message to Master queued w/err=0: serial=223080 error=0 13:39:24 Received message from Master: op=Filter serial=223081 13:39:24 Color wheel filter change from 0 to 0 13:39:24 FLIGetFilterPos err=0 currentPosition=0 13:39:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:24 Filter is already there-color wheel unchanged 13:39:24 Received message from Master: op=Shutter serial=223082 13:39:24 Shutter LASER open 13:39:25 Received message from Camera: op=State serial=223084 13:39:25 GetSingleValue result=40 Value=cccccccc 13:39:25 SkyScan query 13:39:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:39:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:25 Parameters OK 13:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:25 Set A/D data flow result=40 13:39:25 Set A/D channel type result=40 13:39:25 Set A/D encoding result=40 13:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:25 Set channel filter=0.000000e+000 result=40 13:39:25 Config A/D Result=40 13:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:25 Get A/D filter: -9.255963e+061 result=40 13:39:25 Get A/D value=-858993460 result=40 13:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:25 Parameters OK 13:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:25 Set A/D data flow result=40 13:39:25 Set A/D channel type result=40 13:39:25 Set A/D encoding result=40 13:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:25 Set channel filter=0.000000e+000 result=40 13:39:25 Config A/D Result=40 13:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:25 Get A/D filter: -9.255963e+061 result=40 13:39:25 Get A/D value=-858993460 result=40 13:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:25 Aux= 13:39:25 Message to Camera, serial 223084 queued 13:39:33 Received message from Master: op=Shutter serial=223093 13:39:33 Shutter LASER close 13:39:33 Received message from Master: op=PointingHead serial=223097 13:39:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:39:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:39:34 Point started: ret=0 13:39:34 point_skyscan result=0 13:39:34 Check angles 13:39:34 SkyScan query 13:39:35 SkyScan query done: ret=0 az=89.88<-5992 ze=157.155<-1523 Statuses=0009 0009 13:39:35 Msec=0 True Az=89.88 Ze=157.155 Az status=0009 Ze status=0009 13:39:35 Check angles 13:39:35 SkyScan query 13:39:36 SkyScan query done: ret=0 az=72.45<-4830 ze=136.215<-2919 Statuses=0009 0009 13:39:36 Msec=750 True Az=72.45 Ze=136.215 Az status=0009 Ze status=0009 13:39:36 Check angles 13:39:36 SkyScan query 13:39:36 SkyScan query done: ret=0 az=55.065<-3671 ze=115.26<-4316 Statuses=0009 0009 13:39:36 Msec=1500 True Az=55.065 Ze=115.26 Az status=0009 Ze status=0009 13:39:37 Check angles 13:39:37 SkyScan query 13:39:37 SkyScan query done: ret=0 az=41.01<-2734 ze=94.275<-5715 Statuses=0009 0009 13:39:37 Msec=2250 True Az=41.01 Ze=94.275 Az status=0009 Ze status=0009 13:39:37 Check angles 13:39:37 SkyScan query 13:39:38 SkyScan query done: ret=0 az=40.995<-2733 ze=73.32<-7112 Statuses=0008 0009 13:39:38 Msec=3000 True Az=40.995 Ze=73.32 Az status=0008 Ze status=0009 13:39:38 Check angles 13:39:38 SkyScan query 13:39:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 13:39:39 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 13:39:39 Check angles 13:39:39 SkyScan query 13:39:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:39:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:39:39 Message to Master queued w/err=0: serial=223097 error=0 13:39:44 Received message from Master: op=Filter serial=223098 13:39:44 Color wheel filter change from 0 to 0 13:39:44 FLIGetFilterPos err=0 currentPosition=0 13:39:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:44 Filter is already there-color wheel unchanged 13:39:45 Received message from Master: op=Shutter serial=223099 13:39:45 Shutter LASER close 13:39:45 Received message from Camera: op=State serial=223101 13:39:45 GetSingleValue result=40 Value=cccccccc 13:39:45 SkyScan query 13:39:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:39:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:45 Parameters OK 13:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:45 Set A/D data flow result=40 13:39:45 Set A/D channel type result=40 13:39:45 Set A/D encoding result=40 13:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:45 Set channel filter=0.000000e+000 result=40 13:39:45 Config A/D Result=40 13:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:45 Get A/D filter: -9.255963e+061 result=40 13:39:45 Get A/D value=-858993460 result=40 13:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:45 Parameters OK 13:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:45 Set A/D data flow result=40 13:39:45 Set A/D channel type result=40 13:39:45 Set A/D encoding result=40 13:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:45 Set channel filter=0.000000e+000 result=40 13:39:45 Config A/D Result=40 13:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:45 Get A/D filter: -9.255963e+061 result=40 13:39:45 Get A/D value=-858993460 result=40 13:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:45 Aux= 13:39:45 Message to Camera, serial 223101 queued 13:40:22 Received message from Master: op=PointingHead serial=223114 13:40:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:40:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:40:22 Point started: ret=0 13:40:22 point_skyscan result=0 13:40:23 Check angles 13:40:23 SkyScan query 13:40:24 SkyScan query done: ret=0 az=64.245<-4283 ze=66.555<-7563 Statuses=0009 0008 13:40:24 Msec=0 True Az=64.245 Ze=66.555 Az status=0009 Ze status=0008 13:40:24 Check angles 13:40:24 SkyScan query 13:40:25 SkyScan query done: ret=0 az=81.915<-5461 ze=66.495<-7567 Statuses=0009 0008 13:40:25 Msec=750 True Az=81.915 Ze=66.495 Az status=0009 Ze status=0008 13:40:25 Check angles 13:40:25 SkyScan query 13:40:25 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 13:40:25 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 13:40:25 Check angles 13:40:25 SkyScan query 13:40:26 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 13:40:26 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 13:40:26 Check angles 13:40:26 SkyScan query 13:40:27 SkyScan query done: ret=0 az=134.49<-8966 ze=66.495<-7567 Statuses=0009 0008 13:40:27 Msec=3000 True Az=134.49 Ze=66.495 Az status=0009 Ze status=0008 13:40:27 Check angles 13:40:27 SkyScan query 13:40:28 SkyScan query done: ret=0 az=151.725<-10115 ze=66.495<-7567 Statuses=0009 0008 13:40:28 Msec=3750 True Az=151.725 Ze=66.495 Az status=0009 Ze status=0008 13:40:28 Check angles 13:40:28 SkyScan query 13:40:28 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:40:28 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:40:28 Message to Master queued w/err=0: serial=223114 error=0 13:40:33 Received message from Master: op=Filter serial=223115 13:40:33 Color wheel filter change from 0 to 0 13:40:33 FLIGetFilterPos err=0 currentPosition=0 13:40:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:33 Filter is already there-color wheel unchanged 13:40:33 Received message from Master: op=Shutter serial=223116 13:40:33 Shutter LASER close 13:40:34 Received message from Camera: op=State serial=223118 13:40:34 GetSingleValue result=40 Value=cccccccc 13:40:34 SkyScan query 13:40:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:40:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:34 Parameters OK 13:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:34 Set A/D data flow result=40 13:40:34 Set A/D channel type result=40 13:40:34 Set A/D encoding result=40 13:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:34 Set channel filter=0.000000e+000 result=40 13:40:34 Config A/D Result=40 13:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:34 Get A/D filter: -9.255963e+061 result=40 13:40:34 Get A/D value=-858993460 result=40 13:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:34 Parameters OK 13:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:34 Set A/D data flow result=40 13:40:34 Set A/D channel type result=40 13:40:34 Set A/D encoding result=40 13:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:34 Set channel filter=0.000000e+000 result=40 13:40:34 Config A/D Result=40 13:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:34 Get A/D filter: -9.255963e+061 result=40 13:40:34 Get A/D value=-858993460 result=40 13:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:34 Aux= 13:40:34 Message to Camera, serial 223118 queued 13:41:11 Received message from Master: op=PointingHead serial=223131 13:41:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:41:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:41:11 Point started: ret=0 13:41:11 point_skyscan result=0 13:41:12 Check angles 13:41:12 SkyScan query 13:41:13 SkyScan query done: ret=0 az=134.82<-8988 ze=36.555<-9563 Statuses=0009 0009 13:41:13 Msec=0 True Az=134.82 Ze=36.555 Az status=0009 Ze status=0009 13:41:13 Check angles 13:41:13 SkyScan query 13:41:13 SkyScan query done: ret=0 az=117.3<-7820 ze=15.615<-10959 Statuses=0009 0009 13:41:13 Msec=750 True Az=117.3 Ze=15.615 Az status=0009 Ze status=0009 13:41:14 Check angles 13:41:14 SkyScan query 13:41:14 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.37<-12358 Statuses=0009 0009 13:41:14 Msec=1500 True Az=99.96 Ze=-5.37 Az status=0009 Ze status=0009 13:41:14 Check angles 13:41:14 SkyScan query 13:41:15 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.325<-13755 Statuses=0009 0009 13:41:15 Msec=2250 True Az=82.47 Ze=-26.325 Az status=0009 Ze status=0009 13:41:15 Check angles 13:41:15 SkyScan query 13:41:16 SkyScan query done: ret=0 az=65.07<-4338 ze=-38.58<-14572 Statuses=0009 0008 13:41:16 Msec=3000 True Az=65.07 Ze=-38.58 Az status=0009 Ze status=0008 13:41:16 Check angles 13:41:16 SkyScan query 13:41:16 SkyScan query done: ret=0 az=47.475<-3165 ze=-38.52<-14568 Statuses=0009 0008 13:41:16 Msec=3750 True Az=47.475 Ze=-38.52 Az status=0009 Ze status=0008 13:41:17 Check angles 13:41:17 SkyScan query 13:41:17 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 13:41:17 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 13:41:17 Message to Master queued w/err=0: serial=223131 error=0 13:41:22 Received message from Master: op=Filter serial=223132 13:41:22 Color wheel filter change from 0 to 0 13:41:22 FLIGetFilterPos err=0 currentPosition=0 13:41:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:22 Filter is already there-color wheel unchanged 13:41:22 Received message from Master: op=Shutter serial=223133 13:41:22 Shutter LASER close 13:41:22 Received message from Camera: op=State serial=223135 13:41:22 GetSingleValue result=40 Value=cccccccc 13:41:22 SkyScan query 13:41:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:41:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:23 Parameters OK 13:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:23 Set A/D data flow result=40 13:41:23 Set A/D channel type result=40 13:41:23 Set A/D encoding result=40 13:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:23 Set channel filter=0.000000e+000 result=40 13:41:23 Config A/D Result=40 13:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:23 Get A/D filter: -9.255963e+061 result=40 13:41:23 Get A/D value=-858993460 result=40 13:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:23 Parameters OK 13:41:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:23 Set A/D data flow result=40 13:41:23 Set A/D channel type result=40 13:41:23 Set A/D encoding result=40 13:41:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:23 Set channel filter=0.000000e+000 result=40 13:41:23 Config A/D Result=40 13:41:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:23 Get A/D filter: -9.255963e+061 result=40 13:41:23 Get A/D value=-858993460 result=40 13:41:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:23 Aux= 13:41:23 Message to Camera, serial 223135 queued 13:42:00 Received message from Master: op=PointingHead serial=223148 13:42:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:42:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:42:00 Point started: ret=0 13:42:00 point_skyscan result=0 13:42:01 Check angles 13:42:01 SkyScan query 13:42:01 SkyScan query done: ret=0 az=63.855<-4257 ze=-67.965<-16531 Statuses=0009 0009 13:42:01 Msec=0 True Az=63.855 Ze=-67.965 Az status=0009 Ze status=0009 13:42:02 Check angles 13:42:02 SkyScan query 13:42:02 SkyScan query done: ret=0 az=81.3<-5420 ze=-88.935<-17929 Statuses=0009 0009 13:42:02 Msec=750 True Az=81.3 Ze=-88.935 Az status=0009 Ze status=0009 13:42:02 Check angles 13:42:02 SkyScan query 13:42:03 SkyScan query done: ret=0 az=98.865<-6591 ze=-109.86<-19324 Statuses=0009 0009 13:42:03 Msec=1500 True Az=98.865 Ze=-109.86 Az status=0009 Ze status=0009 13:42:03 Check angles 13:42:03 SkyScan query 13:42:04 SkyScan query done: ret=0 az=116.22<-7748 ze=-130.86<-20724 Statuses=0009 0009 13:42:04 Msec=2250 True Az=116.22 Ze=-130.86 Az status=0009 Ze status=0009 13:42:04 Check angles 13:42:04 SkyScan query 13:42:04 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.555<-21437 Statuses=0009 0008 13:42:04 Msec=3000 True Az=131.07 Ze=-141.555 Az status=0009 Ze status=0008 13:42:05 Check angles 13:42:05 SkyScan query 13:42:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 13:42:05 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 13:42:05 Message to Master queued w/err=0: serial=223148 error=0 13:42:10 Received message from Master: op=Filter serial=223149 13:42:10 Color wheel filter change from 0 to 0 13:42:10 FLIGetFilterPos err=0 currentPosition=0 13:42:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:10 Filter is already there-color wheel unchanged 13:42:10 Received message from Master: op=Shutter serial=223150 13:42:10 Shutter LASER close 13:42:10 Received message from Camera: op=State serial=223152 13:42:10 GetSingleValue result=40 Value=cccccccc 13:42:10 SkyScan query 13:42:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:42:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:11 Parameters OK 13:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:11 Set A/D data flow result=40 13:42:11 Set A/D channel type result=40 13:42:11 Set A/D encoding result=40 13:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:11 Set channel filter=0.000000e+000 result=40 13:42:11 Config A/D Result=40 13:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:11 Get A/D filter: -9.255963e+061 result=40 13:42:11 Get A/D value=-858993460 result=40 13:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:11 Parameters OK 13:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:11 Set A/D data flow result=40 13:42:11 Set A/D channel type result=40 13:42:11 Set A/D encoding result=40 13:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:11 Set channel filter=0.000000e+000 result=40 13:42:11 Config A/D Result=40 13:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:11 Get A/D filter: -9.255963e+061 result=40 13:42:11 Get A/D value=-858993460 result=40 13:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:11 Aux= 13:42:11 Message to Camera, serial 223152 queued 13:42:48 Received message from Master: op=PointingHead serial=223165 13:42:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:42:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:42:48 Point started: ret=0 13:42:48 point_skyscan result=0 13:42:49 Check angles 13:42:49 SkyScan query 13:42:49 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 13:42:49 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 13:42:50 Check angles 13:42:50 SkyScan query 13:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:42:50 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:42:50 Message to Master queued w/err=0: serial=223165 error=0 13:42:55 Received message from Master: op=Filter serial=223166 13:42:55 Color wheel filter change from 0 to 0 13:42:55 FLIGetFilterPos err=0 currentPosition=0 13:42:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:55 Filter is already there-color wheel unchanged 13:42:55 Received message from Master: op=Shutter serial=223167 13:42:55 Shutter LASER open 13:42:56 Received message from Camera: op=State serial=223169 13:42:56 GetSingleValue result=40 Value=cccccccc 13:42:56 SkyScan query 13:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:42:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:56 Parameters OK 13:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:56 Set A/D data flow result=40 13:42:56 Set A/D channel type result=40 13:42:56 Set A/D encoding result=40 13:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:56 Set channel filter=0.000000e+000 result=40 13:42:56 Config A/D Result=40 13:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:56 Get A/D filter: -9.255963e+061 result=40 13:42:56 Get A/D value=-858993460 result=40 13:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:56 Parameters OK 13:42:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:56 Set A/D data flow result=40 13:42:56 Set A/D channel type result=40 13:42:56 Set A/D encoding result=40 13:42:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:56 Set channel filter=0.000000e+000 result=40 13:42:56 Config A/D Result=40 13:42:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:56 Get A/D filter: -9.255963e+061 result=40 13:42:56 Get A/D value=-858993460 result=40 13:42:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:56 Aux= 13:42:56 Message to Camera, serial 223169 queued 13:43:05 Received message from Master: op=Shutter serial=223179 13:43:05 Shutter LASER close 13:43:05 Received message from Master: op=PointingHead serial=223183 13:43:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:43:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:43:05 Point started: ret=0 13:43:05 point_skyscan result=0 13:43:06 Check angles 13:43:06 SkyScan query 13:43:07 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.385<-21559 Statuses=0009 0009 13:43:07 Msec=0 True Az=135.81 Ze=-143.385 Az status=0009 Ze status=0009 13:43:07 Check angles 13:43:07 SkyScan query 13:43:08 SkyScan query done: ret=0 az=153.675<-10245 ze=-121.95<-20130 Statuses=0009 0009 13:43:08 Msec=750 True Az=153.675 Ze=-121.95 Az status=0009 Ze status=0009 13:43:08 Check angles 13:43:08 SkyScan query 13:43:08 SkyScan query done: ret=0 az=171.15<-11410 ze=-100.995<-18733 Statuses=0009 0009 13:43:08 Msec=1500 True Az=171.15 Ze=-100.995 Az status=0009 Ze status=0009 13:43:08 Check angles 13:43:08 SkyScan query 13:43:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.085<-17339 Statuses=0008 0009 13:43:09 Msec=2250 True Az=175.995 Ze=-80.085 Az status=0008 Ze status=0009 13:43:09 Check angles 13:43:09 SkyScan query 13:43:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.085<-15939 Statuses=0008 0009 13:43:10 Msec=3000 True Az=175.995 Ze=-59.085 Az status=0008 Ze status=0009 13:43:10 Check angles 13:43:10 SkyScan query 13:43:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:43:11 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:43:11 Message to Master queued w/err=0: serial=223183 error=0 13:43:16 Received message from Master: op=Filter serial=223184 13:43:16 Color wheel filter change from 0 to 0 13:43:16 FLIGetFilterPos err=0 currentPosition=0 13:43:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:16 Filter is already there-color wheel unchanged 13:43:16 Received message from Master: op=Shutter serial=223185 13:43:16 Shutter LASER close 13:43:16 Received message from Camera: op=State serial=223187 13:43:16 GetSingleValue result=40 Value=cccccccc 13:43:16 SkyScan query 13:43:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:43:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:16 Parameters OK 13:43:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:16 Set A/D data flow result=40 13:43:16 Set A/D channel type result=40 13:43:16 Set A/D encoding result=40 13:43:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:16 Set channel filter=0.000000e+000 result=40 13:43:16 Config A/D Result=40 13:43:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:16 Get A/D filter: -9.255963e+061 result=40 13:43:16 Get A/D value=-858993460 result=40 13:43:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:16 Parameters OK 13:43:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:16 Set A/D data flow result=40 13:43:16 Set A/D channel type result=40 13:43:16 Set A/D encoding result=40 13:43:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:16 Set channel filter=0.000000e+000 result=40 13:43:16 Config A/D Result=40 13:43:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:16 Get A/D filter: -9.255963e+061 result=40 13:43:16 Get A/D value=-858993460 result=40 13:43:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:16 Aux= 13:43:16 Message to Camera, serial 223187 queued 13:43:53 Received message from Master: op=PointingHead serial=223200 13:43:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:43:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:43:54 Point started: ret=0 13:43:54 point_skyscan result=0 13:43:54 Check angles 13:43:54 SkyScan query 13:43:55 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.75<-13450 Statuses=0009 0009 13:43:55 Msec=0 True Az=152.94 Ze=-21.75 Az status=0009 Ze status=0009 13:43:55 Check angles 13:43:55 SkyScan query 13:43:56 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.765<-12051 Statuses=0009 0009 13:43:56 Msec=750 True Az=135.585 Ze=-0.765 Az status=0009 Ze status=0009 13:43:56 Check angles 13:43:56 SkyScan query 13:43:57 SkyScan query done: ret=0 az=118.065<-7871 ze=20.16<-10656 Statuses=0009 0009 13:43:57 Msec=1500 True Az=118.065 Ze=20.16 Az status=0009 Ze status=0009 13:43:57 Check angles 13:43:57 SkyScan query 13:43:57 SkyScan query done: ret=0 az=100.26<-6684 ze=41.58<-9228 Statuses=0009 0009 13:43:57 Msec=2250 True Az=100.26 Ze=41.58 Az status=0009 Ze status=0009 13:43:57 Check angles 13:43:57 SkyScan query 13:43:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 13:43:58 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 13:43:58 Check angles 13:43:58 SkyScan query 13:43:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:43:59 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:43:59 Message to Master queued w/err=0: serial=223200 error=0 13:44:04 Received message from Master: op=Filter serial=223201 13:44:04 Color wheel filter change from 0 to 0 13:44:04 FLIGetFilterPos err=0 currentPosition=0 13:44:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:04 Filter is already there-color wheel unchanged 13:44:04 Received message from Master: op=Shutter serial=223202 13:44:04 Shutter LASER close 13:44:04 Received message from Camera: op=State serial=223204 13:44:04 GetSingleValue result=40 Value=cccccccc 13:44:04 SkyScan query 13:44:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:44:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:05 Parameters OK 13:44:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:05 Set A/D data flow result=40 13:44:05 Set A/D channel type result=40 13:44:05 Set A/D encoding result=40 13:44:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:05 Set channel filter=0.000000e+000 result=40 13:44:05 Config A/D Result=40 13:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:05 Get A/D filter: -9.255963e+061 result=40 13:44:05 Get A/D value=-858993460 result=40 13:44:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:05 Parameters OK 13:44:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:05 Set A/D data flow result=40 13:44:05 Set A/D channel type result=40 13:44:05 Set A/D encoding result=40 13:44:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:05 Set channel filter=0.000000e+000 result=40 13:44:05 Config A/D Result=40 13:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:05 Get A/D filter: -9.255963e+061 result=40 13:44:05 Get A/D value=-858993460 result=40 13:44:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:05 Aux= 13:44:05 Message to Camera, serial 223204 queued 13:44:41 Received message from Master: op=PointingHead serial=223217 13:44:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:44:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:44:42 Point started: ret=0 13:44:42 point_skyscan result=0 13:44:43 Check angles 13:44:43 SkyScan query 13:44:43 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 13:44:43 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 13:44:43 Check angles 13:44:43 SkyScan query 13:44:44 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 13:44:44 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 13:44:44 Check angles 13:44:44 SkyScan query 13:44:45 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 13:44:45 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 13:44:45 Check angles 13:44:45 SkyScan query 13:44:45 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 13:44:45 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 13:44:46 Check angles 13:44:46 SkyScan query 13:44:46 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:44:46 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:44:46 Check angles 13:44:46 SkyScan query 13:44:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:44:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:44:47 Message to Master queued w/err=0: serial=223217 error=0 13:44:52 Received message from Master: op=Filter serial=223218 13:44:52 Color wheel filter change from 0 to 0 13:44:52 FLIGetFilterPos err=0 currentPosition=0 13:44:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:52 Filter is already there-color wheel unchanged 13:44:52 Received message from Master: op=Shutter serial=223219 13:44:52 Shutter LASER close 13:44:52 Received message from Camera: op=State serial=223221 13:44:52 GetSingleValue result=40 Value=cccccccc 13:44:52 SkyScan query 13:44:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:44:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:53 Parameters OK 13:44:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:53 Set A/D data flow result=40 13:44:53 Set A/D channel type result=40 13:44:53 Set A/D encoding result=40 13:44:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:53 Set channel filter=0.000000e+000 result=40 13:44:53 Config A/D Result=40 13:44:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:53 Get A/D filter: -9.255963e+061 result=40 13:44:53 Get A/D value=-858993460 result=40 13:44:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:53 Parameters OK 13:44:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:53 Set A/D data flow result=40 13:44:53 Set A/D channel type result=40 13:44:53 Set A/D encoding result=40 13:44:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:53 Set channel filter=0.000000e+000 result=40 13:44:53 Config A/D Result=40 13:44:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:53 Get A/D filter: -9.255963e+061 result=40 13:44:53 Get A/D value=-858993460 result=40 13:44:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:53 Aux= 13:44:53 Message to Camera, serial 223221 queued 13:45:27 Received message from Master: op=Identify serial=223228 13:45:30 Received message from Master: op=PointingHead serial=223237 13:45:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:45:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:45:30 Point started: ret=0 13:45:30 point_skyscan result=0 13:45:31 Check angles 13:45:31 SkyScan query 13:45:31 SkyScan query done: ret=0 az=152.94<-10196 ze=8.73<-11418 Statuses=0009 0009 13:45:31 Msec=0 True Az=152.94 Ze=8.73 Az status=0009 Ze status=0009 13:45:31 Check angles 13:45:31 SkyScan query 13:45:32 SkyScan query done: ret=0 az=135.27<-9018 ze=-12.615<-12841 Statuses=0009 0009 13:45:32 Msec=750 True Az=135.27 Ze=-12.615 Az status=0009 Ze status=0009 13:45:32 Check angles 13:45:32 SkyScan query 13:45:33 SkyScan query done: ret=0 az=117.375<-7825 ze=-34.065<-14271 Statuses=0009 0009 13:45:33 Msec=1500 True Az=117.375 Ze=-34.065 Az status=0009 Ze status=0009 13:45:33 Check angles 13:45:33 SkyScan query 13:45:33 SkyScan query done: ret=0 az=99.585<-6639 ze=-51.555<-15437 Statuses=0009 0009 13:45:33 Msec=2250 True Az=99.585 Ze=-51.555 Az status=0009 Ze status=0009 13:45:34 Check angles 13:45:34 SkyScan query 13:45:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:45:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:45:34 Check angles 13:45:34 SkyScan query 13:45:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:45:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:45:35 Message to Master queued w/err=0: serial=223237 error=0 13:45:40 Received message from Master: op=Filter serial=223238 13:45:40 Color wheel filter change from 0 to 0 [UTC 2018-12-17 13:45:40] 13:45:40 FLIGetFilterPos err=0 currentPosition=0 13:45:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:40 Filter is already there-color wheel unchanged 13:45:40 Received message from Master: op=Shutter serial=223239 13:45:40 Shutter LASER close 13:45:40 Received message from Camera: op=State serial=223241 13:45:40 GetSingleValue result=40 Value=cccccccc 13:45:40 SkyScan query 13:45:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:45:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:41 Parameters OK 13:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:41 Set A/D data flow result=40 13:45:41 Set A/D channel type result=40 13:45:41 Set A/D encoding result=40 13:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:41 Set channel filter=0.000000e+000 result=40 13:45:41 Config A/D Result=40 13:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:41 Get A/D filter: -9.255963e+061 result=40 13:45:41 Get A/D value=-858993460 result=40 13:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:41 Parameters OK 13:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:41 Set A/D data flow result=40 13:45:41 Set A/D channel type result=40 13:45:41 Set A/D encoding result=40 13:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:41 Set channel filter=0.000000e+000 result=40 13:45:41 Config A/D Result=40 13:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:41 Get A/D filter: -9.255963e+061 result=40 13:45:41 Get A/D value=-858993460 result=40 13:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:41 Aux= 13:45:41 Message to Camera, serial 223241 queued 13:46:18 Received message from Master: op=PointingHead serial=223254 13:46:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:46:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:46:18 Point started: ret=0 13:46:18 point_skyscan result=0 13:46:19 Check angles 13:46:19 SkyScan query 13:46:19 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.09<-17406 Statuses=0009 0009 13:46:19 Msec=0 True Az=108.915 Ze=-81.09 Az status=0009 Ze status=0009 13:46:20 Check angles 13:46:20 SkyScan query 13:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 13:46:20 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 13:46:20 Check angles 13:46:20 SkyScan query 13:46:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 13:46:21 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 13:46:21 Check angles 13:46:21 SkyScan query 13:46:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 13:46:22 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 13:46:22 Check angles 13:46:22 SkyScan query 13:46:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.215<-23081 Statuses=0008 0009 13:46:22 Msec=3000 True Az=112.995 Ze=-166.215 Az status=0008 Ze status=0009 13:46:23 Check angles 13:46:23 SkyScan query 13:46:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:46:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:46:23 Message to Master queued w/err=0: serial=223254 error=0 13:46:28 Received message from Master: op=Filter serial=223255 13:46:28 Color wheel filter change from 0 to 0 13:46:28 FLIGetFilterPos err=0 currentPosition=0 13:46:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:28 Filter is already there-color wheel unchanged 13:46:28 Received message from Master: op=Shutter serial=223256 13:46:28 Shutter LASER open 13:46:28 Received message from Camera: op=State serial=223258 13:46:28 GetSingleValue result=40 Value=cccccccc 13:46:28 SkyScan query 13:46:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:46:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:29 Parameters OK 13:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:29 Set A/D data flow result=40 13:46:29 Set A/D channel type result=40 13:46:29 Set A/D encoding result=40 13:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:29 Set channel filter=0.000000e+000 result=40 13:46:29 Config A/D Result=40 13:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:29 Get A/D filter: -9.255963e+061 result=40 13:46:29 Get A/D value=-858993460 result=40 13:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:29 Parameters OK 13:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:29 Set A/D data flow result=40 13:46:29 Set A/D channel type result=40 13:46:29 Set A/D encoding result=40 13:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:29 Set channel filter=0.000000e+000 result=40 13:46:29 Config A/D Result=40 13:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:29 Get A/D filter: -9.255963e+061 result=40 13:46:29 Get A/D value=-858993460 result=40 13:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:29 Aux= 13:46:29 Message to Camera, serial 223258 queued 13:46:37 Received message from Master: op=Shutter serial=223268 13:46:38 Shutter LASER close 13:46:38 Received message from Master: op=PointingHead serial=223272 13:46:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:46:38 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:46:38 Point started: ret=0 13:46:38 point_skyscan result=0 13:46:39 Check angles 13:46:39 SkyScan query 13:46:40 SkyScan query done: ret=0 az=89.61<-5974 ze=156.87<-1542 Statuses=0009 0009 13:46:40 Msec=0 True Az=89.61 Ze=156.87 Az status=0009 Ze status=0009 13:46:40 Check angles 13:46:40 SkyScan query 13:46:40 SkyScan query done: ret=0 az=72.075<-4805 ze=135.915<-2939 Statuses=0009 0009 13:46:40 Msec=750 True Az=72.075 Ze=135.915 Az status=0009 Ze status=0009 13:46:41 Check angles 13:46:41 SkyScan query 13:46:41 SkyScan query done: ret=0 az=54.72<-3648 ze=114.945<-4337 Statuses=0009 0009 13:46:41 Msec=1500 True Az=54.72 Ze=114.945 Az status=0009 Ze status=0009 13:46:41 Check angles 13:46:41 SkyScan query 13:46:42 SkyScan query done: ret=0 az=41.01<-2734 ze=93.99<-5734 Statuses=0009 0009 13:46:42 Msec=2250 True Az=41.01 Ze=93.99 Az status=0009 Ze status=0009 13:46:42 Check angles 13:46:42 SkyScan query 13:46:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 13:46:43 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 13:46:43 Check angles 13:46:43 SkyScan query 13:46:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 13:46:43 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 13:46:44 Check angles 13:46:44 SkyScan query 13:46:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:46:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:46:44 Message to Master queued w/err=0: serial=223272 error=0 13:46:49 Received message from Master: op=Filter serial=223273 13:46:49 Color wheel filter change from 0 to 0 13:46:49 FLIGetFilterPos err=0 currentPosition=0 13:46:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:49 Filter is already there-color wheel unchanged 13:46:49 Received message from Master: op=Shutter serial=223274 13:46:49 Shutter LASER close 13:46:49 Received message from Camera: op=State serial=223276 13:46:49 GetSingleValue result=40 Value=cccccccc 13:46:49 SkyScan query 13:46:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:46:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:50 Parameters OK 13:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:50 Set A/D data flow result=40 13:46:50 Set A/D channel type result=40 13:46:50 Set A/D encoding result=40 13:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:50 Set channel filter=0.000000e+000 result=40 13:46:50 Config A/D Result=40 13:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:50 Get A/D filter: -9.255963e+061 result=40 13:46:50 Get A/D value=-858993460 result=40 13:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:50 Parameters OK 13:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:50 Set A/D data flow result=40 13:46:50 Set A/D channel type result=40 13:46:50 Set A/D encoding result=40 13:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:50 Set channel filter=0.000000e+000 result=40 13:46:50 Config A/D Result=40 13:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:50 Get A/D filter: -9.255963e+061 result=40 13:46:50 Get A/D value=-858993460 result=40 13:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:50 Aux= 13:46:50 Message to Camera, serial 223276 queued 13:47:27 Received message from Master: op=PointingHead serial=223289 13:47:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:47:27 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:47:27 Point started: ret=0 13:47:27 point_skyscan result=0 13:47:28 Check angles 13:47:28 SkyScan query 13:47:29 SkyScan query done: ret=0 az=64.26<-4284 ze=66.555<-7563 Statuses=0009 0008 13:47:29 Msec=0 True Az=64.26 Ze=66.555 Az status=0009 Ze status=0008 13:47:29 Check angles 13:47:29 SkyScan query 13:47:29 SkyScan query done: ret=0 az=81.585<-5439 ze=66.495<-7567 Statuses=0009 0008 13:47:29 Msec=750 True Az=81.585 Ze=66.495 Az status=0009 Ze status=0008 13:47:29 Check angles 13:47:29 SkyScan query 13:47:30 SkyScan query done: ret=0 az=99.675<-6645 ze=66.495<-7567 Statuses=0009 0008 13:47:30 Msec=1500 True Az=99.675 Ze=66.495 Az status=0009 Ze status=0008 13:47:30 Check angles 13:47:30 SkyScan query 13:47:31 SkyScan query done: ret=0 az=117.075<-7805 ze=66.495<-7567 Statuses=0009 0008 13:47:31 Msec=2250 True Az=117.075 Ze=66.495 Az status=0009 Ze status=0008 13:47:31 Check angles 13:47:31 SkyScan query 13:47:32 SkyScan query done: ret=0 az=134.535<-8969 ze=66.495<-7567 Statuses=0009 0008 13:47:32 Msec=3000 True Az=134.535 Ze=66.495 Az status=0009 Ze status=0008 13:47:32 Check angles 13:47:32 SkyScan query 13:47:32 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 13:47:32 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 13:47:32 Check angles 13:47:32 SkyScan query 13:47:33 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:47:33 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:47:33 Message to Master queued w/err=0: serial=223289 error=0 13:47:38 Received message from Master: op=Filter serial=223290 13:47:38 Color wheel filter change from 0 to 0 13:47:38 FLIGetFilterPos err=0 currentPosition=0 13:47:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:38 Filter is already there-color wheel unchanged 13:47:38 Received message from Master: op=Shutter serial=223291 13:47:38 Shutter LASER close 13:47:38 Received message from Camera: op=State serial=223293 13:47:38 GetSingleValue result=40 Value=cccccccc 13:47:38 SkyScan query 13:47:39 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:47:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:39 Parameters OK 13:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:39 Set A/D data flow result=40 13:47:39 Set A/D channel type result=40 13:47:39 Set A/D encoding result=40 13:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:39 Set channel filter=0.000000e+000 result=40 13:47:39 Config A/D Result=40 13:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:39 Get A/D filter: -9.255963e+061 result=40 13:47:39 Get A/D value=-858993460 result=40 13:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:39 Parameters OK 13:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:39 Set A/D data flow result=40 13:47:39 Set A/D channel type result=40 13:47:39 Set A/D encoding result=40 13:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:39 Set channel filter=0.000000e+000 result=40 13:47:39 Config A/D Result=40 13:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:39 Get A/D filter: -9.255963e+061 result=40 13:47:39 Get A/D value=-858993460 result=40 13:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:39 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:39 Aux= 13:47:39 Message to Camera, serial 223293 queued 13:48:16 Received message from Master: op=PointingHead serial=223306 13:48:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:48:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:48:16 Point started: ret=0 13:48:16 point_skyscan result=0 13:48:17 Check angles 13:48:17 SkyScan query 13:48:17 SkyScan query done: ret=0 az=135.225<-9015 ze=36.96<-9536 Statuses=0009 0009 13:48:17 Msec=0 True Az=135.225 Ze=36.96 Az status=0009 Ze status=0009 13:48:18 Check angles 13:48:18 SkyScan query 13:48:18 SkyScan query done: ret=0 az=117.3<-7820 ze=15.645<-10957 Statuses=0009 0009 13:48:18 Msec=750 True Az=117.3 Ze=15.645 Az status=0009 Ze status=0009 13:48:18 Check angles 13:48:18 SkyScan query 13:48:19 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.34<-12356 Statuses=0009 0009 13:48:19 Msec=1500 True Az=99.945 Ze=-5.34 Az status=0009 Ze status=0009 13:48:19 Check angles 13:48:19 SkyScan query 13:48:20 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.295<-13753 Statuses=0009 0009 13:48:20 Msec=2250 True Az=82.455 Ze=-26.295 Az status=0009 Ze status=0009 13:48:20 Check angles 13:48:20 SkyScan query 13:48:20 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.595<-14573 Statuses=0009 0008 13:48:20 Msec=3000 True Az=64.545 Ze=-38.595 Az status=0009 Ze status=0008 13:48:21 Check angles 13:48:21 SkyScan query 13:48:21 SkyScan query done: ret=0 az=47.28<-3152 ze=-38.52<-14568 Statuses=0009 0008 13:48:21 Msec=3750 True Az=47.28 Ze=-38.52 Az status=0009 Ze status=0008 13:48:21 Check angles 13:48:21 SkyScan query 13:48:22 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 13:48:22 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 13:48:22 Message to Master queued w/err=0: serial=223306 error=0 13:48:27 Received message from Master: op=Filter serial=223307 13:48:27 Color wheel filter change from 0 to 0 13:48:27 FLIGetFilterPos err=0 currentPosition=0 13:48:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:27 Filter is already there-color wheel unchanged 13:48:27 Received message from Master: op=Shutter serial=223308 13:48:27 Shutter LASER close 13:48:27 Received message from Camera: op=State serial=223310 13:48:27 GetSingleValue result=40 Value=cccccccc 13:48:27 SkyScan query 13:48:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:48:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:28 Parameters OK 13:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:28 Set A/D data flow result=40 13:48:28 Set A/D channel type result=40 13:48:28 Set A/D encoding result=40 13:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:28 Set channel filter=0.000000e+000 result=40 13:48:28 Config A/D Result=40 13:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:28 Get A/D filter: -9.255963e+061 result=40 13:48:28 Get A/D value=-858993460 result=40 13:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:28 Parameters OK 13:48:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:28 Set A/D data flow result=40 13:48:28 Set A/D channel type result=40 13:48:28 Set A/D encoding result=40 13:48:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:28 Set channel filter=0.000000e+000 result=40 13:48:28 Config A/D Result=40 13:48:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:28 Get A/D filter: -9.255963e+061 result=40 13:48:28 Get A/D value=-858993460 result=40 13:48:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:28 Aux= 13:48:28 Message to Camera, serial 223310 queued 13:49:05 Received message from Master: op=PointingHead serial=223323 13:49:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:49:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:49:05 Point started: ret=0 13:49:05 point_skyscan result=0 13:49:06 Check angles 13:49:06 SkyScan query 13:49:06 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.205<-16547 Statuses=0009 0009 13:49:06 Msec=0 True Az=64.005 Ze=-68.205 Az status=0009 Ze status=0009 13:49:06 Check angles 13:49:06 SkyScan query 13:49:07 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.205<-17947 Statuses=0009 0009 13:49:07 Msec=750 True Az=81.3 Ze=-89.205 Az status=0009 Ze status=0009 13:49:07 Check angles 13:49:07 SkyScan query 13:49:08 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.145<-19343 Statuses=0009 0009 13:49:08 Msec=1500 True Az=98.91 Ze=-110.145 Az status=0009 Ze status=0009 13:49:08 Check angles 13:49:08 SkyScan query 13:49:09 SkyScan query done: ret=0 az=116.325<-7755 ze=-131.1<-20740 Statuses=0009 0009 13:49:09 Msec=2250 True Az=116.325 Ze=-131.1 Az status=0009 Ze status=0009 13:49:09 Check angles 13:49:09 SkyScan query 13:49:09 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 13:49:09 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 13:49:09 Check angles 13:49:09 SkyScan query 13:49:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:49:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:49:10 Message to Master queued w/err=0: serial=223323 error=0 13:49:15 Received message from Master: op=Filter serial=223324 13:49:15 Color wheel filter change from 0 to 0 13:49:15 FLIGetFilterPos err=0 currentPosition=0 13:49:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:15 Filter is already there-color wheel unchanged 13:49:15 Received message from Master: op=Shutter serial=223325 13:49:15 Shutter LASER close 13:49:15 Received message from Camera: op=State serial=223327 13:49:15 GetSingleValue result=40 Value=cccccccc 13:49:15 SkyScan query 13:49:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:49:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:16 Parameters OK 13:49:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:16 Set A/D data flow result=40 13:49:16 Set A/D channel type result=40 13:49:16 Set A/D encoding result=40 13:49:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:16 Set channel filter=0.000000e+000 result=40 13:49:16 Config A/D Result=40 13:49:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:16 Get A/D filter: -9.255963e+061 result=40 13:49:16 Get A/D value=-858993460 result=40 13:49:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:16 Parameters OK 13:49:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:16 Set A/D data flow result=40 13:49:16 Set A/D channel type result=40 13:49:16 Set A/D encoding result=40 13:49:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:16 Set channel filter=0.000000e+000 result=40 13:49:16 Config A/D Result=40 13:49:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:16 Get A/D filter: -9.255963e+061 result=40 13:49:16 Get A/D value=-858993460 result=40 13:49:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:16 Aux= 13:49:16 Message to Camera, serial 223327 queued 13:49:53 Received message from Master: op=PointingHead serial=223340 13:49:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:49:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:49:53 Point started: ret=0 13:49:53 point_skyscan result=0 13:49:54 Check angles 13:49:54 SkyScan query 13:49:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 13:49:54 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 13:49:54 Check angles 13:49:54 SkyScan query 13:49:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:49:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:49:55 Message to Master queued w/err=0: serial=223340 error=0 13:50:00 Received message from Master: op=Filter serial=223341 13:50:00 Color wheel filter change from 0 to 0 13:50:00 FLIGetFilterPos err=0 currentPosition=0 13:50:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:00 Filter is already there-color wheel unchanged 13:50:00 Received message from Master: op=Shutter serial=223342 13:50:00 Shutter LASER open 13:50:00 Received message from Camera: op=State serial=223344 13:50:00 GetSingleValue result=40 Value=cccccccc 13:50:00 SkyScan query 13:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:50:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:01 Parameters OK 13:50:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:01 Set A/D data flow result=40 13:50:01 Set A/D channel type result=40 13:50:01 Set A/D encoding result=40 13:50:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:01 Set channel filter=0.000000e+000 result=40 13:50:01 Config A/D Result=40 13:50:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:01 Get A/D filter: -9.255963e+061 result=40 13:50:01 Get A/D value=-858993460 result=40 13:50:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:01 Parameters OK 13:50:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:01 Set A/D data flow result=40 13:50:01 Set A/D channel type result=40 13:50:01 Set A/D encoding result=40 13:50:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:01 Set channel filter=0.000000e+000 result=40 13:50:01 Config A/D Result=40 13:50:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:01 Get A/D filter: -9.255963e+061 result=40 13:50:01 Get A/D value=-858993460 result=40 13:50:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:01 Aux= 13:50:01 Message to Camera, serial 223344 queued 13:50:09 Received message from Master: op=Shutter serial=223354 13:50:09 Shutter LASER close 13:50:10 Received message from Master: op=PointingHead serial=223358 13:50:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:50:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:50:10 Point started: ret=0 13:50:10 point_skyscan result=0 13:50:11 Check angles 13:50:11 SkyScan query 13:50:12 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.01<-21534 Statuses=0009 0009 13:50:12 Msec=0 True Az=136.155 Ze=-143.01 Az status=0009 Ze status=0009 13:50:12 Check angles 13:50:12 SkyScan query 13:50:12 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.01<-20134 Statuses=0009 0009 13:50:12 Msec=750 True Az=153.6 Ze=-122.01 Az status=0009 Ze status=0009 13:50:13 Check angles 13:50:13 SkyScan query 13:50:13 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.115<-18741 Statuses=0009 0009 13:50:13 Msec=1500 True Az=171.09 Ze=-101.115 Az status=0009 Ze status=0009 13:50:13 Check angles 13:50:13 SkyScan query 13:50:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.16<-17344 Statuses=0008 0009 13:50:14 Msec=2250 True Az=175.995 Ze=-80.16 Az status=0008 Ze status=0009 13:50:14 Check angles 13:50:14 SkyScan query 13:50:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.19<-15946 Statuses=0008 0009 13:50:15 Msec=3000 True Az=176.01 Ze=-59.19 Az status=0008 Ze status=0009 13:50:15 Check angles 13:50:15 SkyScan query 13:50:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 13:50:15 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 13:50:15 Message to Master queued w/err=0: serial=223358 error=0 13:50:20 Received message from Master: op=Filter serial=223359 13:50:20 Color wheel filter change from 0 to 0 13:50:20 FLIGetFilterPos err=0 currentPosition=0 13:50:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:20 Filter is already there-color wheel unchanged 13:50:21 Received message from Master: op=Shutter serial=223360 13:50:21 Shutter LASER close 13:50:21 Received message from Camera: op=State serial=223362 13:50:21 GetSingleValue result=40 Value=cccccccc 13:50:21 SkyScan query 13:50:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:50:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:21 Parameters OK 13:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:21 Set A/D data flow result=40 13:50:21 Set A/D channel type result=40 13:50:21 Set A/D encoding result=40 13:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:21 Set channel filter=0.000000e+000 result=40 13:50:21 Config A/D Result=40 13:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:21 Get A/D filter: -9.255963e+061 result=40 13:50:21 Get A/D value=-858993460 result=40 13:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:21 Parameters OK 13:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:21 Set A/D data flow result=40 13:50:21 Set A/D channel type result=40 13:50:21 Set A/D encoding result=40 13:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:21 Set channel filter=0.000000e+000 result=40 13:50:21 Config A/D Result=40 13:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:21 Get A/D filter: -9.255963e+061 result=40 13:50:21 Get A/D value=-858993460 result=40 13:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:21 Aux= 13:50:21 Message to Camera, serial 223362 queued 13:50:58 Received message from Master: op=PointingHead serial=223375 13:50:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:50:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:50:59 Point started: ret=0 13:50:59 point_skyscan result=0 13:50:59 Check angles 13:50:59 SkyScan query 13:51:00 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.855<-13457 Statuses=0009 0009 13:51:00 Msec=0 True Az=152.91 Ze=-21.855 Az status=0009 Ze status=0009 13:51:00 Check angles 13:51:00 SkyScan query 13:51:01 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.84<-12056 Statuses=0009 0009 13:51:01 Msec=750 True Az=135.615 Ze=-0.84 Az status=0009 Ze status=0009 13:51:01 Check angles 13:51:01 SkyScan query 13:51:01 SkyScan query done: ret=0 az=118.05<-7870 ze=20.085<-10661 Statuses=0009 0009 13:51:01 Msec=1500 True Az=118.05 Ze=20.085 Az status=0009 Ze status=0009 13:51:02 Check angles 13:51:02 SkyScan query 13:51:02 SkyScan query done: ret=0 az=100.71<-6714 ze=41.085<-9261 Statuses=0009 0009 13:51:02 Msec=2250 True Az=100.71 Ze=41.085 Az status=0009 Ze status=0009 13:51:02 Check angles 13:51:02 SkyScan query 13:51:03 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 13:51:03 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 13:51:03 Check angles 13:51:03 SkyScan query 13:51:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:51:04 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:51:04 Message to Master queued w/err=0: serial=223375 error=0 13:51:09 Received message from Master: op=Filter serial=223376 13:51:09 Color wheel filter change from 0 to 0 13:51:09 FLIGetFilterPos err=0 currentPosition=0 13:51:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:09 Filter is already there-color wheel unchanged 13:51:09 Received message from Master: op=Shutter serial=223377 13:51:09 Shutter LASER close 13:51:09 Received message from Camera: op=State serial=223379 13:51:09 GetSingleValue result=40 Value=cccccccc 13:51:09 SkyScan query 13:51:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:51:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:09 Parameters OK 13:51:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:09 Set A/D data flow result=40 13:51:09 Set A/D channel type result=40 13:51:09 Set A/D encoding result=40 13:51:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:09 Set channel filter=0.000000e+000 result=40 13:51:09 Config A/D Result=40 13:51:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:09 Get A/D filter: -9.255963e+061 result=40 13:51:09 Get A/D value=-858993460 result=40 13:51:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:09 Parameters OK 13:51:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:09 Set A/D data flow result=40 13:51:09 Set A/D channel type result=40 13:51:09 Set A/D encoding result=40 13:51:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:09 Set channel filter=0.000000e+000 result=40 13:51:09 Config A/D Result=40 13:51:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:09 Get A/D filter: -9.255963e+061 result=40 13:51:09 Get A/D value=-858993460 result=40 13:51:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:09 Aux= 13:51:09 Message to Camera, serial 223379 queued 13:51:46 Received message from Master: op=PointingHead serial=223392 13:51:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:51:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:51:47 Point started: ret=0 13:51:47 point_skyscan result=0 13:51:47 Check angles 13:51:47 SkyScan query 13:51:48 SkyScan query done: ret=0 az=108.885<-7259 ze=38.49<-9434 Statuses=0009 0008 13:51:48 Msec=0 True Az=108.885 Ze=38.49 Az status=0009 Ze status=0008 13:51:48 Check angles 13:51:48 SkyScan query 13:51:49 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 13:51:49 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 13:51:49 Check angles 13:51:49 SkyScan query 13:51:49 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 13:51:49 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 13:51:50 Check angles 13:51:50 SkyScan query 13:51:50 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 13:51:50 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 13:51:50 Check angles 13:51:50 SkyScan query 13:51:51 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:51:51 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:51:51 Check angles 13:51:51 SkyScan query 13:51:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:51:52 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:51:52 Message to Master queued w/err=0: serial=223392 error=0 13:51:57 Received message from Master: op=Filter serial=223393 13:51:57 Color wheel filter change from 0 to 0 13:51:57 FLIGetFilterPos err=0 currentPosition=0 13:51:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:57 Filter is already there-color wheel unchanged 13:51:57 Received message from Master: op=Shutter serial=223394 13:51:57 Shutter LASER close 13:51:57 Received message from Camera: op=State serial=223396 13:51:57 GetSingleValue result=40 Value=cccccccc 13:51:57 SkyScan query 13:51:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:51:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:57 Parameters OK 13:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:57 Set A/D data flow result=40 13:51:57 Set A/D channel type result=40 13:51:57 Set A/D encoding result=40 13:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:57 Set channel filter=0.000000e+000 result=40 13:51:57 Config A/D Result=40 13:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:57 Get A/D filter: -9.255963e+061 result=40 13:51:57 Get A/D value=-858993460 result=40 13:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:57 Parameters OK 13:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:57 Set A/D data flow result=40 13:51:57 Set A/D channel type result=40 13:51:57 Set A/D encoding result=40 13:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:57 Set channel filter=0.000000e+000 result=40 13:51:57 Config A/D Result=40 13:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:57 Get A/D filter: -9.255963e+061 result=40 13:51:57 Get A/D value=-858993460 result=40 13:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:57 Aux= 13:51:57 Message to Camera, serial 223396 queued 13:52:34 Received message from Master: op=PointingHead serial=223409 13:52:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:52:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:52:35 Point started: ret=0 13:52:35 point_skyscan result=0 13:52:36 Check angles 13:52:36 SkyScan query 13:52:36 SkyScan query done: ret=0 az=152.94<-10196 ze=8.61<-11426 Statuses=0009 0009 13:52:36 Msec=0 True Az=152.94 Ze=8.61 Az status=0009 Ze status=0009 13:52:36 Check angles 13:52:36 SkyScan query 13:52:37 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.75<-12850 Statuses=0009 0009 13:52:37 Msec=750 True Az=135.12 Ze=-12.75 Az status=0009 Ze status=0009 13:52:37 Check angles 13:52:37 SkyScan query 13:52:38 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.735<-14249 Statuses=0009 0009 13:52:38 Msec=1500 True Az=117.57 Ze=-33.735 Az status=0009 Ze status=0009 13:52:38 Check angles 13:52:38 SkyScan query 13:52:38 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.555<-15437 Statuses=0009 0009 13:52:38 Msec=2250 True Az=100.245 Ze=-51.555 Az status=0009 Ze status=0009 13:52:39 Check angles 13:52:39 SkyScan query 13:52:39 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:52:39 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:52:39 Check angles 13:52:39 SkyScan query 13:52:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:52:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:52:40 Message to Master queued w/err=0: serial=223409 error=0 13:52:45 Received message from Master: op=Filter serial=223410 13:52:45 Color wheel filter change from 0 to 0 13:52:45 FLIGetFilterPos err=0 currentPosition=0 13:52:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:45 Filter is already there-color wheel unchanged 13:52:45 Received message from Master: op=Shutter serial=223411 13:52:45 Shutter LASER close 13:52:45 Received message from Camera: op=State serial=223413 13:52:45 GetSingleValue result=40 Value=cccccccc 13:52:45 SkyScan query 13:52:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:52:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:46 Parameters OK 13:52:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:46 Set A/D data flow result=40 13:52:46 Set A/D channel type result=40 13:52:46 Set A/D encoding result=40 13:52:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:46 Set channel filter=0.000000e+000 result=40 13:52:46 Config A/D Result=40 13:52:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:46 Get A/D filter: -9.255963e+061 result=40 13:52:46 Get A/D value=-858993460 result=40 13:52:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:46 Parameters OK 13:52:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:46 Set A/D data flow result=40 13:52:46 Set A/D channel type result=40 13:52:46 Set A/D encoding result=40 13:52:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:46 Set channel filter=0.000000e+000 result=40 13:52:46 Config A/D Result=40 13:52:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:46 Get A/D filter: -9.255963e+061 result=40 13:52:46 Get A/D value=-858993460 result=40 13:52:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:46 Aux= 13:52:46 Message to Camera, serial 223413 queued 13:53:22 Received message from Master: op=PointingHead serial=223426 13:53:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:53:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:53:23 Point started: ret=0 13:53:23 point_skyscan result=0 13:53:24 Check angles 13:53:24 SkyScan query 13:53:24 SkyScan query done: ret=0 az=108.75<-7250 ze=-81.09<-17406 Statuses=0009 0009 13:53:24 Msec=0 True Az=108.75 Ze=-81.09 Az status=0009 Ze status=0009 13:53:24 Check angles 13:53:24 SkyScan query 13:53:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 13:53:25 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 13:53:25 Check angles 13:53:25 SkyScan query 13:53:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 13:53:26 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 13:53:26 Check angles 13:53:26 SkyScan query 13:53:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.895<-21593 Statuses=0008 0009 13:53:26 Msec=2250 True Az=112.995 Ze=-143.895 Az status=0008 Ze status=0009 13:53:27 Check angles 13:53:27 SkyScan query 13:53:27 SkyScan query done: ret=0 az=112.98<-7532 ze=-164.85<-22990 Statuses=0008 0009 13:53:27 Msec=3000 True Az=112.98 Ze=-164.85 Az status=0008 Ze status=0009 13:53:27 Check angles 13:53:27 SkyScan query 13:53:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:53:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:53:28 Message to Master queued w/err=0: serial=223426 error=0 13:53:33 Received message from Master: op=Filter serial=223427 13:53:33 Color wheel filter change from 0 to 0 13:53:33 FLIGetFilterPos err=0 currentPosition=0 13:53:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:33 Filter is already there-color wheel unchanged 13:53:33 Received message from Master: op=Shutter serial=223428 13:53:33 Shutter LASER open 13:53:33 Received message from Camera: op=State serial=223430 13:53:33 GetSingleValue result=40 Value=cccccccc 13:53:33 SkyScan query 13:53:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:53:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:34 Parameters OK 13:53:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:34 Set A/D data flow result=40 13:53:34 Set A/D channel type result=40 13:53:34 Set A/D encoding result=40 13:53:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:34 Set channel filter=0.000000e+000 result=40 13:53:34 Config A/D Result=40 13:53:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:34 Get A/D filter: -9.255963e+061 result=40 13:53:34 Get A/D value=-858993460 result=40 13:53:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:34 Parameters OK 13:53:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:34 Set A/D data flow result=40 13:53:34 Set A/D channel type result=40 13:53:34 Set A/D encoding result=40 13:53:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:34 Set channel filter=0.000000e+000 result=40 13:53:34 Config A/D Result=40 13:53:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:34 Get A/D filter: -9.255963e+061 result=40 13:53:34 Get A/D value=-858993460 result=40 13:53:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:34 Aux= 13:53:34 Message to Camera, serial 223430 queued 13:53:41 Received message from Master: op=Shutter serial=223439 13:53:41 Shutter LASER close 13:53:42 Received message from Master: op=PointingHead serial=223443 13:53:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:53:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:53:42 Point started: ret=0 13:53:42 point_skyscan result=0 13:53:43 Check angles 13:53:43 SkyScan query 13:53:43 SkyScan query done: ret=0 az=89.67<-5978 ze=157.245<-1517 Statuses=0009 0009 13:53:43 Msec=0 True Az=89.67 Ze=157.245 Az status=0009 Ze status=0009 13:53:44 Check angles 13:53:44 SkyScan query 13:53:44 SkyScan query done: ret=0 az=72.27<-4818 ze=136.275<-2915 Statuses=0009 0009 13:53:44 Msec=750 True Az=72.27 Ze=136.275 Az status=0009 Ze status=0009 13:53:44 Check angles 13:53:44 SkyScan query 13:53:45 SkyScan query done: ret=0 az=54.855<-3657 ze=115.365<-4309 Statuses=0009 0009 13:53:45 Msec=1500 True Az=54.855 Ze=115.365 Az status=0009 Ze status=0009 13:53:45 Check angles 13:53:45 SkyScan query 13:53:46 SkyScan query done: ret=0 az=41.01<-2734 ze=93.96<-5736 Statuses=0009 0009 13:53:46 Msec=2250 True Az=41.01 Ze=93.96 Az status=0009 Ze status=0009 13:53:46 Check angles 13:53:46 SkyScan query 13:53:46 SkyScan query done: ret=0 az=40.98<-2732 ze=72.525<-7165 Statuses=0008 0009 13:53:46 Msec=3000 True Az=40.98 Ze=72.525 Az status=0008 Ze status=0009 13:53:47 Check angles 13:53:47 SkyScan query 13:53:47 SkyScan query done: ret=0 az=40.98<-2732 ze=52.095<-8527 Statuses=0008 0009 13:53:47 Msec=3750 True Az=40.98 Ze=52.095 Az status=0008 Ze status=0009 13:53:47 Check angles 13:53:47 SkyScan query 13:53:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:53:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:53:48 Message to Master queued w/err=0: serial=223443 error=0 13:53:53 Received message from Master: op=Filter serial=223444 13:53:53 Color wheel filter change from 0 to 0 13:53:53 FLIGetFilterPos err=0 currentPosition=0 13:53:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:53 Filter is already there-color wheel unchanged 13:53:53 Received message from Master: op=Shutter serial=223445 13:53:53 Shutter LASER close 13:53:53 Received message from Camera: op=State serial=223447 13:53:53 GetSingleValue result=40 Value=cccccccc 13:53:53 SkyScan query 13:53:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:53:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:54 Parameters OK 13:53:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:54 Set A/D data flow result=40 13:53:54 Set A/D channel type result=40 13:53:54 Set A/D encoding result=40 13:53:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:54 Set channel filter=0.000000e+000 result=40 13:53:54 Config A/D Result=40 13:53:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:54 Get A/D filter: -9.255963e+061 result=40 13:53:54 Get A/D value=-858993460 result=40 13:53:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:54 Parameters OK 13:53:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:54 Set A/D data flow result=40 13:53:54 Set A/D channel type result=40 13:53:54 Set A/D encoding result=40 13:53:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:54 Set channel filter=0.000000e+000 result=40 13:53:54 Config A/D Result=40 13:53:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:54 Get A/D filter: -9.255963e+061 result=40 13:53:54 Get A/D value=-858993460 result=40 13:53:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:54 Aux= 13:53:54 Message to Camera, serial 223447 queued 13:54:31 Received message from Master: op=PointingHead serial=223460 13:54:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:54:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:54:31 Point started: ret=0 13:54:31 point_skyscan result=0 13:54:32 Check angles 13:54:32 SkyScan query 13:54:32 SkyScan query done: ret=0 az=63.885<-4259 ze=66.54<-7564 Statuses=0009 0008 13:54:32 Msec=0 True Az=63.885 Ze=66.54 Az status=0009 Ze status=0008 13:54:33 Check angles 13:54:33 SkyScan query 13:54:33 SkyScan query done: ret=0 az=81.21<-5414 ze=66.51<-7566 Statuses=0009 0008 13:54:33 Msec=750 True Az=81.21 Ze=66.51 Az status=0009 Ze status=0008 13:54:33 Check angles 13:54:33 SkyScan query 13:54:34 SkyScan query done: ret=0 az=98.745<-6583 ze=66.495<-7567 Statuses=0009 0008 13:54:34 Msec=1500 True Az=98.745 Ze=66.495 Az status=0009 Ze status=0008 13:54:34 Check angles 13:54:34 SkyScan query 13:54:35 SkyScan query done: ret=0 az=116.31<-7754 ze=66.495<-7567 Statuses=0009 0008 13:54:35 Msec=2250 True Az=116.31 Ze=66.495 Az status=0009 Ze status=0008 13:54:35 Check angles 13:54:35 SkyScan query 13:54:35 SkyScan query done: ret=0 az=133.74<-8916 ze=66.495<-7567 Statuses=0009 0008 13:54:35 Msec=3000 True Az=133.74 Ze=66.495 Az status=0009 Ze status=0008 13:54:36 Check angles 13:54:36 SkyScan query 13:54:36 SkyScan query done: ret=0 az=151.08<-10072 ze=66.495<-7567 Statuses=0009 0008 13:54:36 Msec=3750 True Az=151.08 Ze=66.495 Az status=0009 Ze status=0008 13:54:36 Check angles 13:54:36 SkyScan query 13:54:37 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:54:37 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:54:37 Message to Master queued w/err=0: serial=223460 error=0 13:54:42 Received message from Master: op=Filter serial=223461 13:54:42 Color wheel filter change from 0 to 0 13:54:42 FLIGetFilterPos err=0 currentPosition=0 13:54:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:42 Filter is already there-color wheel unchanged 13:54:42 Received message from Master: op=Shutter serial=223462 13:54:42 Shutter LASER close 13:54:42 Received message from Camera: op=State serial=223464 13:54:42 GetSingleValue result=40 Value=cccccccc 13:54:42 SkyScan query 13:54:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:54:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:43 Parameters OK 13:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:43 Set A/D data flow result=40 13:54:43 Set A/D channel type result=40 13:54:43 Set A/D encoding result=40 13:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:43 Set channel filter=0.000000e+000 result=40 13:54:43 Config A/D Result=40 13:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:43 Get A/D filter: -9.255963e+061 result=40 13:54:43 Get A/D value=-858993460 result=40 13:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:43 Parameters OK 13:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:43 Set A/D data flow result=40 13:54:43 Set A/D channel type result=40 13:54:43 Set A/D encoding result=40 13:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:43 Set channel filter=0.000000e+000 result=40 13:54:43 Config A/D Result=40 13:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:43 Get A/D filter: -9.255963e+061 result=40 13:54:43 Get A/D value=-858993460 result=40 13:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:43 Aux= 13:54:43 Message to Camera, serial 223464 queued 13:55:20 Received message from Master: op=PointingHead serial=223477 13:55:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:55:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:55:20 Point started: ret=0 13:55:20 point_skyscan result=0 13:55:21 Check angles 13:55:21 SkyScan query 13:55:21 SkyScan query done: ret=0 az=134.76<-8984 ze=36.42<-9572 Statuses=0009 0009 13:55:21 Msec=0 True Az=134.76 Ze=36.42 Az status=0009 Ze status=0009 13:55:21 Check angles 13:55:21 SkyScan query 13:55:22 SkyScan query done: ret=0 az=116.91<-7794 ze=15.03<-10998 Statuses=0009 0009 13:55:22 Msec=750 True Az=116.91 Ze=15.03 Az status=0009 Ze status=0009 13:55:22 Check angles 13:55:22 SkyScan query 13:55:23 SkyScan query done: ret=0 az=99.48<-6632 ze=-5.94<-12396 Statuses=0009 0009 13:55:23 Msec=1500 True Az=99.48 Ze=-5.94 Az status=0009 Ze status=0009 13:55:23 Check angles 13:55:23 SkyScan query 13:55:23 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.91<-13794 Statuses=0009 0009 13:55:23 Msec=2250 True Az=82.035 Ze=-26.91 Az status=0009 Ze status=0009 13:55:24 Check angles 13:55:24 SkyScan query 13:55:24 SkyScan query done: ret=0 az=64.455<-4297 ze=-38.58<-14572 Statuses=0009 0008 13:55:24 Msec=3000 True Az=64.455 Ze=-38.58 Az status=0009 Ze status=0008 13:55:24 Check angles 13:55:24 SkyScan query [UTC 2018-12-17 13:55:25] 13:55:25 SkyScan query done: ret=0 az=47.145<-3143 ze=-38.52<-14568 Statuses=0009 0008 13:55:25 Msec=3750 True Az=47.145 Ze=-38.52 Az status=0009 Ze status=0008 13:55:25 Check angles 13:55:25 SkyScan query 13:55:26 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 13:55:26 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 13:55:26 Message to Master queued w/err=0: serial=223477 error=0 13:55:31 Received message from Master: op=Filter serial=223478 13:55:31 Color wheel filter change from 0 to 0 13:55:31 FLIGetFilterPos err=0 currentPosition=0 13:55:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:31 Filter is already there-color wheel unchanged 13:55:31 Received message from Master: op=Shutter serial=223479 13:55:31 Shutter LASER close 13:55:31 Received message from Camera: op=State serial=223481 13:55:31 GetSingleValue result=40 Value=cccccccc 13:55:31 SkyScan query 13:55:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:55:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:32 Parameters OK 13:55:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:32 Set A/D data flow result=40 13:55:32 Set A/D channel type result=40 13:55:32 Set A/D encoding result=40 13:55:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:32 Set channel filter=0.000000e+000 result=40 13:55:32 Config A/D Result=40 13:55:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:32 Get A/D filter: -9.255963e+061 result=40 13:55:32 Get A/D value=-858993460 result=40 13:55:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:32 Parameters OK 13:55:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:32 Set A/D data flow result=40 13:55:32 Set A/D channel type result=40 13:55:32 Set A/D encoding result=40 13:55:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:32 Set channel filter=0.000000e+000 result=40 13:55:32 Config A/D Result=40 13:55:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:32 Get A/D filter: -9.255963e+061 result=40 13:55:32 Get A/D value=-858993460 result=40 13:55:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:32 Aux= 13:55:32 Message to Camera, serial 223481 queued [UTC 2018-12-17 13:55:52] 13:56:08 Received message from Master: op=PointingHead serial=223494 13:56:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:56:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:56:09 Point started: ret=0 13:56:09 point_skyscan result=0 13:56:09 Check angles 13:56:09 SkyScan query 13:56:10 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.4<-16560 Statuses=0009 0009 13:56:10 Msec=0 True Az=64.08 Ze=-68.4 Az status=0009 Ze status=0009 13:56:10 Check angles 13:56:10 SkyScan query 13:56:11 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.385<-17959 Statuses=0009 0009 13:56:11 Msec=750 True Az=81.375 Ze=-89.385 Az status=0009 Ze status=0009 13:56:11 Check angles 13:56:11 SkyScan query 13:56:12 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.325<-19355 Statuses=0009 0009 13:56:12 Msec=1500 True Az=98.955 Ze=-110.325 Az status=0009 Ze status=0009 13:56:12 Check angles 13:56:12 SkyScan query 13:56:12 SkyScan query done: ret=0 az=116.88<-7792 ze=-131.7<-20780 Statuses=0009 0009 13:56:12 Msec=2250 True Az=116.88 Ze=-131.7 Az status=0009 Ze status=0009 13:56:12 Check angles 13:56:12 SkyScan query 13:56:13 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 13:56:13 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 13:56:13 Check angles 13:56:13 SkyScan query 13:56:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:56:14 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:56:14 Message to Master queued w/err=0: serial=223494 error=0 13:56:19 Received message from Master: op=Filter serial=223495 13:56:19 Color wheel filter change from 0 to 0 13:56:19 FLIGetFilterPos err=0 currentPosition=0 13:56:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:19 Filter is already there-color wheel unchanged 13:56:19 Received message from Master: op=Shutter serial=223496 13:56:19 Shutter LASER close 13:56:19 Received message from Camera: op=State serial=223498 13:56:19 GetSingleValue result=40 Value=cccccccc 13:56:19 SkyScan query 13:56:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:56:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:20 Parameters OK 13:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:20 Set A/D data flow result=40 13:56:20 Set A/D channel type result=40 13:56:20 Set A/D encoding result=40 13:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:20 Set channel filter=0.000000e+000 result=40 13:56:20 Config A/D Result=40 13:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:20 Get A/D filter: -9.255963e+061 result=40 13:56:20 Get A/D value=-858993460 result=40 13:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:20 Parameters OK 13:56:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:20 Set A/D data flow result=40 13:56:20 Set A/D channel type result=40 13:56:20 Set A/D encoding result=40 13:56:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:20 Set channel filter=0.000000e+000 result=40 13:56:20 Config A/D Result=40 13:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:20 Get A/D filter: -9.255963e+061 result=40 13:56:20 Get A/D value=-858993460 result=40 13:56:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:20 Aux= 13:56:20 Message to Camera, serial 223498 queued 13:56:56 Received message from Master: op=PointingHead serial=223511 13:56:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:56:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:56:57 Point started: ret=0 13:56:57 point_skyscan result=0 13:56:57 Check angles 13:56:57 SkyScan query 13:56:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 13:56:58 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 13:56:58 Check angles 13:56:58 SkyScan query 13:56:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:56:59 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:56:59 Message to Master queued w/err=0: serial=223511 error=0 13:57:04 Received message from Master: op=Filter serial=223512 13:57:04 Color wheel filter change from 0 to 0 13:57:04 FLIGetFilterPos err=0 currentPosition=0 13:57:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:04 Filter is already there-color wheel unchanged 13:57:04 Received message from Master: op=Shutter serial=223513 13:57:04 Shutter LASER open 13:57:04 Received message from Camera: op=State serial=223515 13:57:04 GetSingleValue result=40 Value=cccccccc 13:57:04 SkyScan query 13:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:57:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:05 Parameters OK 13:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:05 Set A/D data flow result=40 13:57:05 Set A/D channel type result=40 13:57:05 Set A/D encoding result=40 13:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:05 Set channel filter=0.000000e+000 result=40 13:57:05 Config A/D Result=40 13:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:05 Get A/D filter: -9.255963e+061 result=40 13:57:05 Get A/D value=-858993460 result=40 13:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:05 Parameters OK 13:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:05 Set A/D data flow result=40 13:57:05 Set A/D channel type result=40 13:57:05 Set A/D encoding result=40 13:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:05 Set channel filter=0.000000e+000 result=40 13:57:05 Config A/D Result=40 13:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:05 Get A/D filter: -9.255963e+061 result=40 13:57:05 Get A/D value=-858993460 result=40 13:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:05 Aux= 13:57:05 Message to Camera, serial 223515 queued 13:57:13 Received message from Master: op=Shutter serial=223525 13:57:13 Shutter LASER close 13:57:14 Received message from Master: op=PointingHead serial=223529 13:57:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:57:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:57:14 Point started: ret=0 13:57:14 point_skyscan result=0 13:57:15 Check angles 13:57:15 SkyScan query 13:57:15 SkyScan query done: ret=0 az=136.395<-9093 ze=-143.085<-21539 Statuses=0009 0009 13:57:15 Msec=0 True Az=136.395 Ze=-143.085 Az status=0009 Ze status=0009 13:57:16 Check angles 13:57:16 SkyScan query 13:57:16 SkyScan query done: ret=0 az=153.75<-10250 ze=-122.085<-20139 Statuses=0009 0009 13:57:16 Msec=750 True Az=153.75 Ze=-122.085 Az status=0009 Ze status=0009 13:57:16 Check angles 13:57:16 SkyScan query 13:57:17 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.19<-18746 Statuses=0009 0009 13:57:17 Msec=1500 True Az=171.225 Ze=-101.19 Az status=0009 Ze status=0009 13:57:17 Check angles 13:57:17 SkyScan query 13:57:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.22<-17348 Statuses=0008 0009 13:57:18 Msec=2250 True Az=175.995 Ze=-80.22 Az status=0008 Ze status=0009 13:57:18 Check angles 13:57:18 SkyScan query 13:57:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.25<-15950 Statuses=0008 0009 13:57:18 Msec=3000 True Az=175.995 Ze=-59.25 Az status=0008 Ze status=0009 13:57:19 Check angles 13:57:19 SkyScan query 13:57:19 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 13:57:19 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 13:57:19 Message to Master queued w/err=0: serial=223529 error=0 13:57:24 Received message from Master: op=Filter serial=223530 13:57:24 Color wheel filter change from 0 to 0 13:57:24 FLIGetFilterPos err=0 currentPosition=0 13:57:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:24 Filter is already there-color wheel unchanged 13:57:24 Received message from Master: op=Shutter serial=223531 13:57:24 Shutter LASER close 13:57:25 Received message from Camera: op=State serial=223533 13:57:25 GetSingleValue result=40 Value=cccccccc 13:57:25 SkyScan query 13:57:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:57:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:25 Parameters OK 13:57:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:25 Set A/D data flow result=40 13:57:25 Set A/D channel type result=40 13:57:25 Set A/D encoding result=40 13:57:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:25 Set channel filter=0.000000e+000 result=40 13:57:25 Config A/D Result=40 13:57:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:25 Get A/D filter: -9.255963e+061 result=40 13:57:25 Get A/D value=-858993460 result=40 13:57:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:25 Parameters OK 13:57:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:25 Set A/D data flow result=40 13:57:25 Set A/D channel type result=40 13:57:25 Set A/D encoding result=40 13:57:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:25 Set channel filter=0.000000e+000 result=40 13:57:25 Config A/D Result=40 13:57:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:25 Get A/D filter: -9.255963e+061 result=40 13:57:25 Get A/D value=-858993460 result=40 13:57:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:25 Aux= 13:57:25 Message to Camera, serial 223533 queued 13:58:02 Received message from Master: op=PointingHead serial=223546 13:58:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:58:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:58:02 Point started: ret=0 13:58:02 point_skyscan result=0 13:58:03 Check angles 13:58:03 SkyScan query 13:58:04 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 13:58:04 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 13:58:04 Check angles 13:58:04 SkyScan query 13:58:04 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.285<-12019 Statuses=0009 0009 13:58:04 Msec=750 True Az=135.12 Ze=-0.285 Az status=0009 Ze status=0009 13:58:05 Check angles 13:58:05 SkyScan query 13:58:05 SkyScan query done: ret=0 az=117.63<-7842 ze=20.64<-10624 Statuses=0009 0009 13:58:05 Msec=1500 True Az=117.63 Ze=20.64 Az status=0009 Ze status=0009 13:58:05 Check angles 13:58:05 SkyScan query 13:58:06 SkyScan query done: ret=0 az=99.885<-6659 ze=42.03<-9198 Statuses=0009 0009 13:58:06 Msec=2250 True Az=99.885 Ze=42.03 Az status=0009 Ze status=0009 13:58:06 Check angles 13:58:06 SkyScan query 13:58:07 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 13:58:07 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 13:58:07 Check angles 13:58:07 SkyScan query 13:58:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:58:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:58:07 Message to Master queued w/err=0: serial=223546 error=0 13:58:12 Received message from Master: op=Filter serial=223547 13:58:12 Color wheel filter change from 0 to 0 13:58:12 FLIGetFilterPos err=0 currentPosition=0 13:58:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:12 Filter is already there-color wheel unchanged 13:58:13 Received message from Master: op=Shutter serial=223548 13:58:13 Shutter LASER close 13:58:13 Received message from Camera: op=State serial=223550 13:58:13 GetSingleValue result=40 Value=cccccccc 13:58:13 SkyScan query 13:58:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:58:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:13 Parameters OK 13:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:13 Set A/D data flow result=40 13:58:13 Set A/D channel type result=40 13:58:13 Set A/D encoding result=40 13:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:13 Set channel filter=0.000000e+000 result=40 13:58:13 Config A/D Result=40 13:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:13 Get A/D filter: -9.255963e+061 result=40 13:58:13 Get A/D value=-858993460 result=40 13:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:13 Parameters OK 13:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:13 Set A/D data flow result=40 13:58:13 Set A/D channel type result=40 13:58:13 Set A/D encoding result=40 13:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:13 Set channel filter=0.000000e+000 result=40 13:58:13 Config A/D Result=40 13:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:13 Get A/D filter: -9.255963e+061 result=40 13:58:13 Get A/D value=-858993460 result=40 13:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:13 Aux= 13:58:13 Message to Camera, serial 223550 queued 13:58:50 Received message from Master: op=PointingHead serial=223563 13:58:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:58:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:58:50 Point started: ret=0 13:58:50 point_skyscan result=0 13:58:51 Check angles 13:58:51 SkyScan query 13:58:52 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 13:58:52 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 13:58:52 Check angles 13:58:52 SkyScan query 13:58:53 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 13:58:53 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 13:58:53 Check angles 13:58:53 SkyScan query 13:58:53 SkyScan query done: ret=0 az=144.48<-9632 ze=38.505<-9433 Statuses=0009 0008 13:58:53 Msec=1500 True Az=144.48 Ze=38.505 Az status=0009 Ze status=0008 13:58:54 Check angles 13:58:54 SkyScan query 13:58:54 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 13:58:54 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 13:58:54 Check angles 13:58:54 SkyScan query 13:58:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:58:55 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:58:55 Check angles 13:58:55 SkyScan query 13:58:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:58:56 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:58:56 Message to Master queued w/err=0: serial=223563 error=0 13:59:01 Received message from Master: op=Filter serial=223564 13:59:01 Color wheel filter change from 0 to 0 13:59:01 FLIGetFilterPos err=0 currentPosition=0 13:59:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:01 Filter is already there-color wheel unchanged 13:59:01 Received message from Master: op=Shutter serial=223565 13:59:01 Shutter LASER close 13:59:01 Received message from Camera: op=State serial=223567 13:59:01 GetSingleValue result=40 Value=cccccccc 13:59:01 SkyScan query 13:59:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:59:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:01 Parameters OK 13:59:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:01 Set A/D data flow result=40 13:59:01 Set A/D channel type result=40 13:59:01 Set A/D encoding result=40 13:59:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:01 Set channel filter=0.000000e+000 result=40 13:59:01 Config A/D Result=40 13:59:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:01 Get A/D filter: -9.255963e+061 result=40 13:59:01 Get A/D value=-858993460 result=40 13:59:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:01 Parameters OK 13:59:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:01 Set A/D data flow result=40 13:59:01 Set A/D channel type result=40 13:59:01 Set A/D encoding result=40 13:59:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:01 Set channel filter=0.000000e+000 result=40 13:59:01 Config A/D Result=40 13:59:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:01 Get A/D filter: -9.255963e+061 result=40 13:59:01 Get A/D value=-858993460 result=40 13:59:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:01 Aux= 13:59:01 Message to Camera, serial 223567 queued 13:59:38 Received message from Master: op=PointingHead serial=223580 13:59:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:59:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:59:39 Point started: ret=0 13:59:39 point_skyscan result=0 13:59:39 Check angles 13:59:39 SkyScan query 13:59:40 SkyScan query done: ret=0 az=152.73<-10182 ze=8.49<-11434 Statuses=0009 0009 13:59:40 Msec=0 True Az=152.73 Ze=8.49 Az status=0009 Ze status=0009 13:59:40 Check angles 13:59:40 SkyScan query 13:59:41 SkyScan query done: ret=0 az=135.015<-9001 ze=-12.885<-12859 Statuses=0009 0009 13:59:41 Msec=750 True Az=135.015 Ze=-12.885 Az status=0009 Ze status=0009 13:59:41 Check angles 13:59:41 SkyScan query 13:59:41 SkyScan query done: ret=0 az=117.435<-7829 ze=-33.87<-14258 Statuses=0009 0009 13:59:41 Msec=1500 True Az=117.435 Ze=-33.87 Az status=0009 Ze status=0009 13:59:42 Check angles 13:59:42 SkyScan query 13:59:42 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.555<-15437 Statuses=0009 0009 13:59:42 Msec=2250 True Az=100.14 Ze=-51.555 Az status=0009 Ze status=0009 13:59:42 Check angles 13:59:42 SkyScan query 13:59:43 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 13:59:43 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 13:59:43 Check angles 13:59:43 SkyScan query 13:59:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:59:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:59:44 Message to Master queued w/err=0: serial=223580 error=0 13:59:49 Received message from Master: op=Filter serial=223581 13:59:49 Color wheel filter change from 0 to 0 13:59:49 FLIGetFilterPos err=0 currentPosition=0 13:59:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:49 Filter is already there-color wheel unchanged 13:59:49 Received message from Master: op=Shutter serial=223582 13:59:49 Shutter LASER close 13:59:49 Received message from Camera: op=State serial=223584 13:59:49 GetSingleValue result=40 Value=cccccccc 13:59:49 SkyScan query 13:59:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:59:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:49 Parameters OK 13:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:49 Set A/D data flow result=40 13:59:49 Set A/D channel type result=40 13:59:49 Set A/D encoding result=40 13:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:49 Set channel filter=0.000000e+000 result=40 13:59:49 Config A/D Result=40 13:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:49 Get A/D filter: -9.255963e+061 result=40 13:59:49 Get A/D value=-858993460 result=40 13:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:49 Parameters OK 13:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:49 Set A/D data flow result=40 13:59:49 Set A/D channel type result=40 13:59:49 Set A/D encoding result=40 13:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:49 Set channel filter=0.000000e+000 result=40 13:59:49 Config A/D Result=40 13:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:49 Get A/D filter: -9.255963e+061 result=40 13:59:49 Get A/D value=-858993460 result=40 13:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:49 Aux= 13:59:49 Message to Camera, serial 223584 queued 14:00:26 Received message from Master: op=PointingHead serial=223597 14:00:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:00:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:00:27 Point started: ret=0 14:00:27 point_skyscan result=0 14:00:27 Check angles 14:00:27 SkyScan query 14:00:28 SkyScan query done: ret=0 az=109.425<-7295 ze=-81.825<-17455 Statuses=0009 0009 14:00:28 Msec=0 True Az=109.425 Ze=-81.825 Az status=0009 Ze status=0009 14:00:28 Check angles 14:00:28 SkyScan query 14:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 14:00:29 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 14:00:29 Check angles 14:00:29 SkyScan query 14:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 14:00:30 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 14:00:30 Check angles 14:00:30 SkyScan query 14:00:30 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.63<-21642 Statuses=0008 0009 14:00:30 Msec=2250 True Az=112.98 Ze=-144.63 Az status=0008 Ze status=0009 14:00:30 Check angles 14:00:30 SkyScan query 14:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.585<-23039 Statuses=0008 0009 14:00:31 Msec=3000 True Az=112.995 Ze=-165.585 Az status=0008 Ze status=0009 14:00:31 Check angles 14:00:31 SkyScan query 14:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:00:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:00:32 Message to Master queued w/err=0: serial=223597 error=0 14:00:37 Received message from Master: op=Filter serial=223598 14:00:37 Color wheel filter change from 0 to 0 14:00:37 FLIGetFilterPos err=0 currentPosition=0 14:00:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:37 Filter is already there-color wheel unchanged 14:00:37 Received message from Master: op=Shutter serial=223599 14:00:37 Shutter LASER open 14:00:37 Received message from Camera: op=State serial=223601 14:00:37 GetSingleValue result=40 Value=cccccccc 14:00:37 SkyScan query 14:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:00:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:38 Parameters OK 14:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:38 Set A/D data flow result=40 14:00:38 Set A/D channel type result=40 14:00:38 Set A/D encoding result=40 14:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:38 Set channel filter=0.000000e+000 result=40 14:00:38 Config A/D Result=40 14:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:38 Get A/D filter: -9.255963e+061 result=40 14:00:38 Get A/D value=-858993460 result=40 14:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:38 Parameters OK 14:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:38 Set A/D data flow result=40 14:00:38 Set A/D channel type result=40 14:00:38 Set A/D encoding result=40 14:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:38 Set channel filter=0.000000e+000 result=40 14:00:38 Config A/D Result=40 14:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:38 Get A/D filter: -9.255963e+061 result=40 14:00:38 Get A/D value=-858993460 result=40 14:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:38 Aux= 14:00:38 Message to Camera, serial 223601 queued 14:00:46 Received message from Master: op=Shutter serial=223611 14:00:46 Shutter LASER close 14:00:47 Received message from Master: op=PointingHead serial=223615 14:00:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:00:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:00:47 Point started: ret=0 14:00:47 point_skyscan result=0 14:00:48 Check angles 14:00:48 SkyScan query 14:00:48 SkyScan query done: ret=0 az=90.105<-6007 ze=157.41<-1506 Statuses=0009 0009 14:00:48 Msec=0 True Az=90.105 Ze=157.41 Az status=0009 Ze status=0009 14:00:48 Check angles 14:00:48 SkyScan query 14:00:49 SkyScan query done: ret=0 az=72.24<-4816 ze=136.02<-2932 Statuses=0009 0009 14:00:49 Msec=750 True Az=72.24 Ze=136.02 Az status=0009 Ze status=0009 14:00:49 Check angles 14:00:49 SkyScan query 14:00:50 SkyScan query done: ret=0 az=54.45<-3630 ze=114.6<-4360 Statuses=0009 0009 14:00:50 Msec=1500 True Az=54.45 Ze=114.6 Az status=0009 Ze status=0009 14:00:50 Check angles 14:00:50 SkyScan query 14:00:50 SkyScan query done: ret=0 az=41.025<-2735 ze=93.705<-5753 Statuses=0009 0009 14:00:50 Msec=2250 True Az=41.025 Ze=93.705 Az status=0009 Ze status=0009 14:00:51 Check angles 14:00:51 SkyScan query 14:00:51 SkyScan query done: ret=0 az=40.98<-2732 ze=72.705<-7153 Statuses=0008 0009 14:00:51 Msec=3000 True Az=40.98 Ze=72.705 Az status=0008 Ze status=0009 14:00:51 Check angles 14:00:51 SkyScan query 14:00:52 SkyScan query done: ret=0 az=40.98<-2732 ze=52.185<-8521 Statuses=0008 0009 14:00:52 Msec=3750 True Az=40.98 Ze=52.185 Az status=0008 Ze status=0009 14:00:52 Check angles 14:00:52 SkyScan query 14:00:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:00:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:00:53 Message to Master queued w/err=0: serial=223615 error=0 14:00:58 Received message from Master: op=Filter serial=223616 14:00:58 Color wheel filter change from 0 to 0 14:00:58 FLIGetFilterPos err=0 currentPosition=0 14:00:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:58 Filter is already there-color wheel unchanged 14:00:58 Received message from Master: op=Shutter serial=223617 14:00:58 Shutter LASER close 14:00:58 Received message from Camera: op=State serial=223619 14:00:58 GetSingleValue result=40 Value=cccccccc 14:00:58 SkyScan query 14:00:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:00:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:59 Parameters OK 14:00:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:59 Set A/D data flow result=40 14:00:59 Set A/D channel type result=40 14:00:59 Set A/D encoding result=40 14:00:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:59 Set channel filter=0.000000e+000 result=40 14:00:59 Config A/D Result=40 14:00:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:59 Get A/D filter: -9.255963e+061 result=40 14:00:59 Get A/D value=-858993460 result=40 14:00:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:59 Parameters OK 14:00:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:59 Set A/D data flow result=40 14:00:59 Set A/D channel type result=40 14:00:59 Set A/D encoding result=40 14:00:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:59 Set channel filter=0.000000e+000 result=40 14:00:59 Config A/D Result=40 14:00:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:59 Get A/D filter: -9.255963e+061 result=40 14:00:59 Get A/D value=-858993460 result=40 14:00:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:59 Aux= 14:00:59 Message to Camera, serial 223619 queued 14:01:36 Received message from Master: op=PointingHead serial=223632 14:01:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:01:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:01:36 Point started: ret=0 14:01:36 point_skyscan result=0 14:01:37 Check angles 14:01:37 SkyScan query 14:01:37 SkyScan query done: ret=0 az=64.515<-4301 ze=66.54<-7564 Statuses=0009 0008 14:01:37 Msec=0 True Az=64.515 Ze=66.54 Az status=0009 Ze status=0008 14:01:37 Check angles 14:01:37 SkyScan query 14:01:38 SkyScan query done: ret=0 az=81.795<-5453 ze=66.51<-7566 Statuses=0009 0008 14:01:38 Msec=750 True Az=81.795 Ze=66.51 Az status=0009 Ze status=0008 14:01:38 Check angles 14:01:38 SkyScan query 14:01:39 SkyScan query done: ret=0 az=99.9<-6660 ze=66.495<-7567 Statuses=0009 0008 14:01:39 Msec=1500 True Az=99.9 Ze=66.495 Az status=0009 Ze status=0008 14:01:39 Check angles 14:01:39 SkyScan query 14:01:39 SkyScan query done: ret=0 az=117.39<-7826 ze=66.495<-7567 Statuses=0009 0008 14:01:39 Msec=2250 True Az=117.39 Ze=66.495 Az status=0009 Ze status=0008 14:01:40 Check angles 14:01:40 SkyScan query 14:01:40 SkyScan query done: ret=0 az=134.82<-8988 ze=66.495<-7567 Statuses=0009 0008 14:01:40 Msec=3000 True Az=134.82 Ze=66.495 Az status=0009 Ze status=0008 14:01:40 Check angles 14:01:40 SkyScan query 14:01:41 SkyScan query done: ret=0 az=152.49<-10166 ze=66.495<-7567 Statuses=0009 0008 14:01:41 Msec=3750 True Az=152.49 Ze=66.495 Az status=0009 Ze status=0008 14:01:41 Check angles 14:01:41 SkyScan query 14:01:42 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:01:42 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:01:42 Message to Master queued w/err=0: serial=223632 error=0 14:01:47 Received message from Master: op=Filter serial=223633 14:01:47 Color wheel filter change from 0 to 0 14:01:47 FLIGetFilterPos err=0 currentPosition=0 14:01:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:47 Filter is already there-color wheel unchanged 14:01:47 Received message from Master: op=Shutter serial=223634 14:01:47 Shutter LASER close 14:01:47 Received message from Camera: op=State serial=223636 14:01:47 GetSingleValue result=40 Value=cccccccc 14:01:47 SkyScan query 14:01:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:48 Parameters OK 14:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:48 Set A/D data flow result=40 14:01:48 Set A/D channel type result=40 14:01:48 Set A/D encoding result=40 14:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:48 Set channel filter=0.000000e+000 result=40 14:01:48 Config A/D Result=40 14:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:48 Get A/D filter: -9.255963e+061 result=40 14:01:48 Get A/D value=-858993460 result=40 14:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:48 Parameters OK 14:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:48 Set A/D data flow result=40 14:01:48 Set A/D channel type result=40 14:01:48 Set A/D encoding result=40 14:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:48 Set channel filter=0.000000e+000 result=40 14:01:48 Config A/D Result=40 14:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:48 Get A/D filter: -9.255963e+061 result=40 14:01:48 Get A/D value=-858993460 result=40 14:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:48 Aux= 14:01:48 Message to Camera, serial 223636 queued 14:02:24 Received message from Master: op=PointingHead serial=223649 14:02:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:02:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:02:25 Point started: ret=0 14:02:25 point_skyscan result=0 14:02:25 Check angles 14:02:25 SkyScan query 14:02:26 SkyScan query done: ret=0 az=134.595<-8973 ze=36.405<-9573 Statuses=0009 0009 14:02:26 Msec=0 True Az=134.595 Ze=36.405 Az status=0009 Ze status=0009 14:02:26 Check angles 14:02:26 SkyScan query 14:02:27 SkyScan query done: ret=0 az=117.135<-7809 ze=15.48<-10968 Statuses=0009 0009 14:02:27 Msec=750 True Az=117.135 Ze=15.48 Az status=0009 Ze status=0009 14:02:27 Check angles 14:02:27 SkyScan query 14:02:28 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.535<-12369 Statuses=0009 0009 14:02:28 Msec=1500 True Az=99.855 Ze=-5.535 Az status=0009 Ze status=0009 14:02:28 Check angles 14:02:28 SkyScan query 14:02:28 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.505<-13767 Statuses=0009 0009 14:02:28 Msec=2250 True Az=82.305 Ze=-26.505 Az status=0009 Ze status=0009 14:02:29 Check angles 14:02:29 SkyScan query 14:02:29 SkyScan query done: ret=0 az=64.32<-4288 ze=-38.58<-14572 Statuses=0009 0008 14:02:29 Msec=3000 True Az=64.32 Ze=-38.58 Az status=0009 Ze status=0008 14:02:29 Check angles 14:02:29 SkyScan query 14:02:30 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.52<-14568 Statuses=0009 0008 14:02:30 Msec=3750 True Az=47.16 Ze=-38.52 Az status=0009 Ze status=0008 14:02:30 Check angles 14:02:30 SkyScan query 14:02:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:02:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:02:31 Message to Master queued w/err=0: serial=223649 error=0 14:02:36 Received message from Master: op=Filter serial=223650 14:02:36 Color wheel filter change from 0 to 0 14:02:36 FLIGetFilterPos err=0 currentPosition=0 14:02:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:36 Filter is already there-color wheel unchanged 14:02:36 Received message from Master: op=Shutter serial=223651 14:02:36 Shutter LASER close 14:02:36 Received message from Camera: op=State serial=223653 14:02:36 GetSingleValue result=40 Value=cccccccc 14:02:36 SkyScan query 14:02:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:02:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:36 Parameters OK 14:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:36 Set A/D data flow result=40 14:02:36 Set A/D channel type result=40 14:02:36 Set A/D encoding result=40 14:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:36 Set channel filter=0.000000e+000 result=40 14:02:36 Config A/D Result=40 14:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:36 Get A/D filter: -9.255963e+061 result=40 14:02:36 Get A/D value=-858993460 result=40 14:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:36 Parameters OK 14:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:36 Set A/D data flow result=40 14:02:36 Set A/D channel type result=40 14:02:36 Set A/D encoding result=40 14:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:36 Set channel filter=0.000000e+000 result=40 14:02:36 Config A/D Result=40 14:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:36 Get A/D filter: -9.255963e+061 result=40 14:02:36 Get A/D value=-858993460 result=40 14:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:36 Aux= 14:02:36 Message to Camera, serial 223653 queued 14:03:13 Received message from Master: op=PointingHead serial=223666 14:03:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:03:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:03:14 Point started: ret=0 14:03:14 point_skyscan result=0 14:03:14 Check angles 14:03:14 SkyScan query 14:03:15 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.07<-16538 Statuses=0009 0009 14:03:15 Msec=0 True Az=63.825 Ze=-68.07 Az status=0009 Ze status=0009 14:03:15 Check angles 14:03:15 SkyScan query 14:03:16 SkyScan query done: ret=0 az=81.15<-5410 ze=-89.025<-17935 Statuses=0009 0009 14:03:16 Msec=750 True Az=81.15 Ze=-89.025 Az status=0009 Ze status=0009 14:03:16 Check angles 14:03:16 SkyScan query 14:03:16 SkyScan query done: ret=0 az=98.715<-6581 ze=-109.965<-19331 Statuses=0009 0009 14:03:16 Msec=1500 True Az=98.715 Ze=-109.965 Az status=0009 Ze status=0009 14:03:17 Check angles 14:03:17 SkyScan query 14:03:17 SkyScan query done: ret=0 az=116.67<-7778 ze=-131.37<-20758 Statuses=0009 0009 14:03:17 Msec=2250 True Az=116.67 Ze=-131.37 Az status=0009 Ze status=0009 14:03:17 Check angles 14:03:17 SkyScan query 14:03:18 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 14:03:18 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 14:03:18 Check angles 14:03:18 SkyScan query 14:03:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:03:19 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:03:19 Message to Master queued w/err=0: serial=223666 error=0 14:03:24 Received message from Master: op=Filter serial=223667 14:03:24 Color wheel filter change from 0 to 0 14:03:24 FLIGetFilterPos err=0 currentPosition=0 14:03:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:24 Filter is already there-color wheel unchanged 14:03:24 Received message from Master: op=Shutter serial=223668 14:03:24 Shutter LASER close 14:03:24 Received message from Camera: op=State serial=223670 14:03:24 GetSingleValue result=40 Value=cccccccc 14:03:24 SkyScan query 14:03:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:03:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:25 Parameters OK 14:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:25 Set A/D data flow result=40 14:03:25 Set A/D channel type result=40 14:03:25 Set A/D encoding result=40 14:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:25 Set channel filter=0.000000e+000 result=40 14:03:25 Config A/D Result=40 14:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:25 Get A/D filter: -9.255963e+061 result=40 14:03:25 Get A/D value=-858993460 result=40 14:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:25 Parameters OK 14:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:25 Set A/D data flow result=40 14:03:25 Set A/D channel type result=40 14:03:25 Set A/D encoding result=40 14:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:25 Set channel filter=0.000000e+000 result=40 14:03:25 Config A/D Result=40 14:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:25 Get A/D filter: -9.255963e+061 result=40 14:03:25 Get A/D value=-858993460 result=40 14:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:25 Aux= 14:03:25 Message to Camera, serial 223670 queued 14:04:01 Received message from Master: op=PointingHead serial=223683 14:04:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:04:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:04:02 Point started: ret=0 14:04:02 point_skyscan result=0 14:04:02 Check angles 14:04:02 SkyScan query 14:04:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 14:04:03 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 14:04:03 Check angles 14:04:03 SkyScan query 14:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:04:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:04:04 Message to Master queued w/err=0: serial=223683 error=0 14:04:09 Received message from Master: op=Filter serial=223684 14:04:09 Color wheel filter change from 0 to 0 14:04:09 FLIGetFilterPos err=0 currentPosition=0 14:04:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:09 Filter is already there-color wheel unchanged 14:04:09 Received message from Master: op=Shutter serial=223685 14:04:09 Shutter LASER open 14:04:09 Received message from Camera: op=State serial=223687 14:04:09 GetSingleValue result=40 Value=cccccccc 14:04:09 SkyScan query 14:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:04:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:10 Parameters OK 14:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:10 Set A/D data flow result=40 14:04:10 Set A/D channel type result=40 14:04:10 Set A/D encoding result=40 14:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:10 Set channel filter=0.000000e+000 result=40 14:04:10 Config A/D Result=40 14:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:10 Get A/D filter: -9.255963e+061 result=40 14:04:10 Get A/D value=-858993460 result=40 14:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:10 Parameters OK 14:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:10 Set A/D data flow result=40 14:04:10 Set A/D channel type result=40 14:04:10 Set A/D encoding result=40 14:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:10 Set channel filter=0.000000e+000 result=40 14:04:10 Config A/D Result=40 14:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:10 Get A/D filter: -9.255963e+061 result=40 14:04:10 Get A/D value=-858993460 result=40 14:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:10 Aux= 14:04:10 Message to Camera, serial 223687 queued 14:04:18 Received message from Master: op=Shutter serial=223697 14:04:18 Shutter LASER close 14:04:19 Received message from Master: op=PointingHead serial=223701 14:04:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:04:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:04:19 Point started: ret=0 14:04:19 point_skyscan result=0 14:04:20 Check angles 14:04:20 SkyScan query 14:04:20 SkyScan query done: ret=0 az=136.215<-9081 ze=-143.265<-21551 Statuses=0009 0009 14:04:20 Msec=0 True Az=136.215 Ze=-143.265 Az status=0009 Ze status=0009 14:04:21 Check angles 14:04:21 SkyScan query 14:04:21 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.295<-20153 Statuses=0009 0009 14:04:21 Msec=750 True Az=153.645 Ze=-122.295 Az status=0009 Ze status=0009 14:04:21 Check angles 14:04:21 SkyScan query 14:04:22 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.415<-18761 Statuses=0009 0009 14:04:22 Msec=1500 True Az=171.06 Ze=-101.415 Az status=0009 Ze status=0009 14:04:22 Check angles 14:04:22 SkyScan query 14:04:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.415<-17361 Statuses=0008 0009 14:04:23 Msec=2250 True Az=175.995 Ze=-80.415 Az status=0008 Ze status=0009 14:04:23 Check angles 14:04:23 SkyScan query 14:04:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.475<-15965 Statuses=0008 0009 14:04:23 Msec=3000 True Az=175.995 Ze=-59.475 Az status=0008 Ze status=0009 14:04:24 Check angles 14:04:24 SkyScan query 14:04:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 14:04:24 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 14:04:24 Message to Master queued w/err=0: serial=223701 error=0 14:04:29 Received message from Master: op=Filter serial=223702 14:04:29 Color wheel filter change from 0 to 0 14:04:29 FLIGetFilterPos err=0 currentPosition=0 14:04:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:29 Filter is already there-color wheel unchanged 14:04:29 Received message from Master: op=Shutter serial=223703 14:04:29 Shutter LASER close 14:04:30 Received message from Camera: op=State serial=223705 14:04:30 GetSingleValue result=40 Value=cccccccc 14:04:30 SkyScan query 14:04:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:04:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:30 Parameters OK 14:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:30 Set A/D data flow result=40 14:04:30 Set A/D channel type result=40 14:04:30 Set A/D encoding result=40 14:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:30 Set channel filter=0.000000e+000 result=40 14:04:30 Config A/D Result=40 14:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:30 Get A/D filter: -9.255963e+061 result=40 14:04:30 Get A/D value=-858993460 result=40 14:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:30 Parameters OK 14:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:30 Set A/D data flow result=40 14:04:30 Set A/D channel type result=40 14:04:30 Set A/D encoding result=40 14:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:30 Set channel filter=0.000000e+000 result=40 14:04:30 Config A/D Result=40 14:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:30 Get A/D filter: -9.255963e+061 result=40 14:04:30 Get A/D value=-858993460 result=40 14:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:30 Aux= 14:04:30 Message to Camera, serial 223705 queued 14:05:07 Received message from Master: op=PointingHead serial=223718 14:05:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:05:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:05:07 Point started: ret=0 14:05:07 point_skyscan result=0 14:05:08 Check angles 14:05:08 SkyScan query 14:05:09 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.945<-13463 Statuses=0009 0009 14:05:09 Msec=0 True Az=153.105 Ze=-21.945 Az status=0009 Ze status=0009 14:05:09 Check angles 14:05:09 SkyScan query 14:05:09 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.945<-12063 Statuses=0009 0009 14:05:09 Msec=750 True Az=135.675 Ze=-0.945 Az status=0009 Ze status=0009 14:05:10 Check angles 14:05:10 SkyScan query 14:05:10 SkyScan query done: ret=0 az=118.11<-7874 ze=19.98<-10668 Statuses=0009 0009 14:05:10 Msec=1500 True Az=118.11 Ze=19.98 Az status=0009 Ze status=0009 14:05:10 Check angles 14:05:10 SkyScan query 14:05:11 SkyScan query done: ret=0 az=100.755<-6717 ze=40.98<-9268 Statuses=0009 0009 14:05:11 Msec=2250 True Az=100.755 Ze=40.98 Az status=0009 Ze status=0009 14:05:11 Check angles 14:05:11 SkyScan query 14:05:12 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 14:05:12 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 14:05:12 Check angles 14:05:12 SkyScan query 14:05:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:05:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:05:12 Message to Master queued w/err=0: serial=223718 error=0 14:05:17 Received message from Master: op=Filter serial=223719 14:05:17 Color wheel filter change from 0 to 0 14:05:17 FLIGetFilterPos err=0 currentPosition=0 14:05:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:17 Filter is already there-color wheel unchanged 14:05:18 Received message from Master: op=Shutter serial=223720 14:05:18 Shutter LASER close 14:05:18 Received message from Camera: op=State serial=223722 14:05:18 GetSingleValue result=40 Value=cccccccc 14:05:18 SkyScan query 14:05:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:05:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:18 Parameters OK 14:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:18 Set A/D data flow result=40 14:05:18 Set A/D channel type result=40 14:05:18 Set A/D encoding result=40 14:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:18 Set channel filter=0.000000e+000 result=40 14:05:18 Config A/D Result=40 14:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:18 Get A/D filter: -9.255963e+061 result=40 14:05:18 Get A/D value=-858993460 result=40 14:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:18 Parameters OK 14:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:18 Set A/D data flow result=40 14:05:18 Set A/D channel type result=40 14:05:18 Set A/D encoding result=40 14:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:18 Set channel filter=0.000000e+000 result=40 14:05:18 Config A/D Result=40 14:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:18 Get A/D filter: -9.255963e+061 result=40 14:05:18 Get A/D value=-858993460 result=40 14:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:18 Aux= 14:05:18 Message to Camera, serial 223722 queued 14:05:55 Received message from Master: op=PointingHead serial=223735 14:05:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:05:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:05:55 Point started: ret=0 14:05:55 point_skyscan result=0 14:05:56 Check angles 14:05:56 SkyScan query 14:05:57 SkyScan query done: ret=0 az=109.11<-7274 ze=38.49<-9434 Statuses=0009 0008 14:05:57 Msec=0 True Az=109.11 Ze=38.49 Az status=0009 Ze status=0008 14:05:57 Check angles 14:05:57 SkyScan query 14:05:57 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 14:05:57 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 14:05:58 Check angles 14:05:58 SkyScan query 14:05:58 SkyScan query done: ret=0 az=144.48<-9632 ze=38.505<-9433 Statuses=0009 0008 14:05:58 Msec=1500 True Az=144.48 Ze=38.505 Az status=0009 Ze status=0008 14:05:58 Check angles 14:05:58 SkyScan query [UTC 2018-12-17 14:05:59] 14:05:59 SkyScan query done: ret=0 az=162.195<-10813 ze=38.505<-9433 Statuses=0009 0008 14:05:59 Msec=2250 True Az=162.195 Ze=38.505 Az status=0009 Ze status=0008 14:05:59 Check angles 14:05:59 SkyScan query 14:06:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:06:00 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:06:00 Check angles 14:06:00 SkyScan query 14:06:00 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:06:00 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:06:00 Message to Master queued w/err=0: serial=223735 error=0 14:06:05 Received message from Master: op=Filter serial=223736 14:06:05 Color wheel filter change from 0 to 0 14:06:05 FLIGetFilterPos err=0 currentPosition=0 14:06:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:05 Filter is already there-color wheel unchanged 14:06:06 Received message from Master: op=Shutter serial=223737 14:06:06 Shutter LASER close 14:06:06 Received message from Camera: op=State serial=223739 14:06:06 GetSingleValue result=40 Value=cccccccc 14:06:06 SkyScan query 14:06:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:06:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:06 Parameters OK 14:06:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:06 Set A/D data flow result=40 14:06:06 Set A/D channel type result=40 14:06:06 Set A/D encoding result=40 14:06:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:06 Set channel filter=0.000000e+000 result=40 14:06:06 Config A/D Result=40 14:06:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:06 Get A/D filter: -9.255963e+061 result=40 14:06:06 Get A/D value=-858993460 result=40 14:06:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:06 Parameters OK 14:06:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:06 Set A/D data flow result=40 14:06:06 Set A/D channel type result=40 14:06:06 Set A/D encoding result=40 14:06:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:06 Set channel filter=0.000000e+000 result=40 14:06:06 Config A/D Result=40 14:06:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:06 Get A/D filter: -9.255963e+061 result=40 14:06:06 Get A/D value=-858993460 result=40 14:06:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:06 Aux= 14:06:06 Message to Camera, serial 223739 queued 14:06:43 Received message from Master: op=PointingHead serial=223752 14:06:43 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:06:43 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:06:43 Point started: ret=0 14:06:43 point_skyscan result=0 14:06:44 Check angles 14:06:44 SkyScan query 14:06:45 SkyScan query done: ret=0 az=152.985<-10199 ze=8.67<-11422 Statuses=0009 0009 14:06:45 Msec=0 True Az=152.985 Ze=8.67 Az status=0009 Ze status=0009 14:06:45 Check angles 14:06:45 SkyScan query 14:06:46 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.225<-12815 Statuses=0009 0009 14:06:46 Msec=750 True Az=135.465 Ze=-12.225 Az status=0009 Ze status=0009 14:06:46 Check angles 14:06:46 SkyScan query 14:06:46 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.21<-14214 Statuses=0009 0009 14:06:46 Msec=1500 True Az=118.02 Ze=-33.21 Az status=0009 Ze status=0009 14:06:46 Check angles 14:06:46 SkyScan query 14:06:47 SkyScan query done: ret=0 az=100.635<-6709 ze=-51.525<-15435 Statuses=0009 0009 14:06:47 Msec=2250 True Az=100.635 Ze=-51.525 Az status=0009 Ze status=0009 14:06:47 Check angles 14:06:47 SkyScan query 14:06:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 14:06:48 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 14:06:48 Check angles 14:06:48 SkyScan query 14:06:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:06:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:06:49 Message to Master queued w/err=0: serial=223752 error=0 14:06:54 Received message from Master: op=Filter serial=223753 14:06:54 Color wheel filter change from 0 to 0 14:06:54 FLIGetFilterPos err=0 currentPosition=0 14:06:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:54 Filter is already there-color wheel unchanged 14:06:54 Received message from Master: op=Shutter serial=223754 14:06:54 Shutter LASER close 14:06:54 Received message from Camera: op=State serial=223756 14:06:54 GetSingleValue result=40 Value=cccccccc 14:06:54 SkyScan query 14:06:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:06:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:54 Parameters OK 14:06:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:54 Set A/D data flow result=40 14:06:54 Set A/D channel type result=40 14:06:54 Set A/D encoding result=40 14:06:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:54 Set channel filter=0.000000e+000 result=40 14:06:54 Config A/D Result=40 14:06:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:54 Get A/D filter: -9.255963e+061 result=40 14:06:54 Get A/D value=-858993460 result=40 14:06:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:54 Parameters OK 14:06:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:54 Set A/D data flow result=40 14:06:54 Set A/D channel type result=40 14:06:54 Set A/D encoding result=40 14:06:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:54 Set channel filter=0.000000e+000 result=40 14:06:54 Config A/D Result=40 14:06:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:54 Get A/D filter: -9.255963e+061 result=40 14:06:54 Get A/D value=-858993460 result=40 14:06:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:54 Aux= 14:06:54 Message to Camera, serial 223756 queued 14:07:31 Received message from Master: op=PointingHead serial=223769 14:07:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:07:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:07:31 Point started: ret=0 14:07:31 point_skyscan result=0 14:07:32 Check angles 14:07:32 SkyScan query 14:07:33 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.69<-17446 Statuses=0009 0009 14:07:33 Msec=0 True Az=109.395 Ze=-81.69 Az status=0009 Ze status=0009 14:07:33 Check angles 14:07:33 SkyScan query 14:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 14:07:34 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 14:07:34 Check angles 14:07:34 SkyScan query 14:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.02<-20268 Statuses=0008 0009 14:07:34 Msec=1500 True Az=112.995 Ze=-124.02 Az status=0008 Ze status=0009 14:07:35 Check angles 14:07:35 SkyScan query 14:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.96<-21664 Statuses=0008 0009 14:07:35 Msec=2250 True Az=112.995 Ze=-144.96 Az status=0008 Ze status=0009 14:07:35 Check angles 14:07:35 SkyScan query 14:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 14:07:36 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 14:07:36 Check angles 14:07:36 SkyScan query 14:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:07:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:07:37 Message to Master queued w/err=0: serial=223769 error=0 14:07:42 Received message from Master: op=Filter serial=223770 14:07:42 Color wheel filter change from 0 to 0 14:07:42 FLIGetFilterPos err=0 currentPosition=0 14:07:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:42 Filter is already there-color wheel unchanged 14:07:42 Received message from Master: op=Shutter serial=223771 14:07:42 Shutter LASER open 14:07:42 Received message from Camera: op=State serial=223773 14:07:42 GetSingleValue result=40 Value=cccccccc 14:07:42 SkyScan query 14:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:07:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:43 Parameters OK 14:07:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:43 Set A/D data flow result=40 14:07:43 Set A/D channel type result=40 14:07:43 Set A/D encoding result=40 14:07:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:43 Set channel filter=0.000000e+000 result=40 14:07:43 Config A/D Result=40 14:07:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:43 Get A/D filter: -9.255963e+061 result=40 14:07:43 Get A/D value=-858993460 result=40 14:07:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:43 Parameters OK 14:07:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:43 Set A/D data flow result=40 14:07:43 Set A/D channel type result=40 14:07:43 Set A/D encoding result=40 14:07:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:43 Set channel filter=0.000000e+000 result=40 14:07:43 Config A/D Result=40 14:07:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:43 Get A/D filter: -9.255963e+061 result=40 14:07:43 Get A/D value=-858993460 result=40 14:07:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:43 Aux= 14:07:43 Message to Camera, serial 223773 queued 14:07:50 Received message from Master: op=Shutter serial=223782 14:07:50 Shutter LASER close 14:07:51 Received message from Master: op=PointingHead serial=223786 14:07:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:07:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:07:51 Point started: ret=0 14:07:51 point_skyscan result=0 14:07:52 Check angles 14:07:52 SkyScan query 14:07:52 SkyScan query done: ret=0 az=89.865<-5991 ze=157.185<-1521 Statuses=0009 0009 14:07:52 Msec=0 True Az=89.865 Ze=157.185 Az status=0009 Ze status=0009 14:07:52 Check angles 14:07:52 SkyScan query 14:07:53 SkyScan query done: ret=0 az=72.435<-4829 ze=136.215<-2919 Statuses=0009 0009 14:07:53 Msec=750 True Az=72.435 Ze=136.215 Az status=0009 Ze status=0009 14:07:53 Check angles 14:07:53 SkyScan query 14:07:54 SkyScan query done: ret=0 az=55.05<-3670 ze=115.29<-4314 Statuses=0009 0009 14:07:54 Msec=1500 True Az=55.05 Ze=115.29 Az status=0009 Ze status=0009 14:07:54 Check angles 14:07:54 SkyScan query 14:07:54 SkyScan query done: ret=0 az=41.01<-2734 ze=94.305<-5713 Statuses=0009 0009 14:07:54 Msec=2250 True Az=41.01 Ze=94.305 Az status=0009 Ze status=0009 14:07:55 Check angles 14:07:55 SkyScan query 14:07:55 SkyScan query done: ret=0 az=40.98<-2732 ze=73.365<-7109 Statuses=0008 0009 14:07:55 Msec=3000 True Az=40.98 Ze=73.365 Az status=0008 Ze status=0009 14:07:55 Check angles 14:07:55 SkyScan query 14:07:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.785<-8481 Statuses=0008 0009 14:07:56 Msec=3750 True Az=40.995 Ze=52.785 Az status=0008 Ze status=0009 14:07:56 Check angles 14:07:56 SkyScan query 14:07:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:07:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:07:57 Message to Master queued w/err=0: serial=223786 error=0 14:08:02 Received message from Master: op=Filter serial=223787 14:08:02 Color wheel filter change from 0 to 0 14:08:02 FLIGetFilterPos err=0 currentPosition=0 14:08:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:02 Filter is already there-color wheel unchanged 14:08:02 Received message from Master: op=Shutter serial=223788 14:08:02 Shutter LASER close 14:08:02 Received message from Camera: op=State serial=223790 14:08:02 GetSingleValue result=40 Value=cccccccc 14:08:02 SkyScan query 14:08:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:08:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:03 Parameters OK 14:08:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:03 Set A/D data flow result=40 14:08:03 Set A/D channel type result=40 14:08:03 Set A/D encoding result=40 14:08:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:03 Set channel filter=0.000000e+000 result=40 14:08:03 Config A/D Result=40 14:08:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:03 Get A/D filter: -9.255963e+061 result=40 14:08:03 Get A/D value=-858993460 result=40 14:08:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:03 Parameters OK 14:08:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:03 Set A/D data flow result=40 14:08:03 Set A/D channel type result=40 14:08:03 Set A/D encoding result=40 14:08:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:03 Set channel filter=0.000000e+000 result=40 14:08:03 Config A/D Result=40 14:08:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:03 Get A/D filter: -9.255963e+061 result=40 14:08:03 Get A/D value=-858993460 result=40 14:08:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:03 Aux= 14:08:03 Message to Camera, serial 223790 queued 14:08:40 Received message from Master: op=PointingHead serial=223803 14:08:40 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:08:40 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:08:40 Point started: ret=0 14:08:40 point_skyscan result=0 14:08:41 Check angles 14:08:41 SkyScan query 14:08:41 SkyScan query done: ret=0 az=63.885<-4259 ze=66.54<-7564 Statuses=0009 0008 14:08:41 Msec=0 True Az=63.885 Ze=66.54 Az status=0009 Ze status=0008 14:08:41 Check angles 14:08:41 SkyScan query 14:08:42 SkyScan query done: ret=0 az=81.21<-5414 ze=66.495<-7567 Statuses=0009 0008 14:08:42 Msec=750 True Az=81.21 Ze=66.495 Az status=0009 Ze status=0008 14:08:42 Check angles 14:08:42 SkyScan query 14:08:43 SkyScan query done: ret=0 az=98.79<-6586 ze=66.495<-7567 Statuses=0009 0008 14:08:43 Msec=1500 True Az=98.79 Ze=66.495 Az status=0009 Ze status=0008 14:08:43 Check angles 14:08:43 SkyScan query 14:08:43 SkyScan query done: ret=0 az=116.355<-7757 ze=66.495<-7567 Statuses=0009 0008 14:08:43 Msec=2250 True Az=116.355 Ze=66.495 Az status=0009 Ze status=0008 14:08:44 Check angles 14:08:44 SkyScan query 14:08:44 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 14:08:44 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 14:08:44 Check angles 14:08:44 SkyScan query 14:08:45 SkyScan query done: ret=0 az=151.515<-10101 ze=66.495<-7567 Statuses=0009 0008 14:08:45 Msec=3750 True Az=151.515 Ze=66.495 Az status=0009 Ze status=0008 14:08:45 Check angles 14:08:45 SkyScan query 14:08:46 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:08:46 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:08:46 Message to Master queued w/err=0: serial=223803 error=0 14:08:51 Received message from Master: op=Filter serial=223804 14:08:51 Color wheel filter change from 0 to 0 14:08:51 FLIGetFilterPos err=0 currentPosition=0 14:08:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:51 Filter is already there-color wheel unchanged 14:08:51 Received message from Master: op=Shutter serial=223805 14:08:51 Shutter LASER close 14:08:51 Received message from Camera: op=State serial=223807 14:08:51 GetSingleValue result=40 Value=cccccccc 14:08:51 SkyScan query 14:08:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:51 Parameters OK 14:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:51 Set A/D data flow result=40 14:08:51 Set A/D channel type result=40 14:08:51 Set A/D encoding result=40 14:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:51 Set channel filter=0.000000e+000 result=40 14:08:51 Config A/D Result=40 14:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:51 Get A/D filter: -9.255963e+061 result=40 14:08:51 Get A/D value=-858993460 result=40 14:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:51 Parameters OK 14:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:51 Set A/D data flow result=40 14:08:51 Set A/D channel type result=40 14:08:51 Set A/D encoding result=40 14:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:51 Set channel filter=0.000000e+000 result=40 14:08:51 Config A/D Result=40 14:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:51 Get A/D filter: -9.255963e+061 result=40 14:08:51 Get A/D value=-858993460 result=40 14:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:51 Aux= 14:08:51 Message to Camera, serial 223807 queued 14:09:28 Received message from Master: op=PointingHead serial=223820 14:09:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:09:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:09:29 Point started: ret=0 14:09:29 point_skyscan result=0 14:09:29 Check angles 14:09:29 SkyScan query 14:09:30 SkyScan query done: ret=0 az=135.195<-9013 ze=36.915<-9539 Statuses=0009 0009 14:09:30 Msec=0 True Az=135.195 Ze=36.915 Az status=0009 Ze status=0009 14:09:30 Check angles 14:09:30 SkyScan query 14:09:31 SkyScan query done: ret=0 az=117.69<-7846 ze=15.975<-10935 Statuses=0009 0009 14:09:31 Msec=750 True Az=117.69 Ze=15.975 Az status=0009 Ze status=0009 14:09:31 Check angles 14:09:31 SkyScan query 14:09:32 SkyScan query done: ret=0 az=100.335<-6689 ze=-4.98<-12332 Statuses=0009 0009 14:09:32 Msec=1500 True Az=100.335 Ze=-4.98 Az status=0009 Ze status=0009 14:09:32 Check angles 14:09:32 SkyScan query 14:09:32 SkyScan query done: ret=0 az=82.8<-5520 ze=-25.935<-13729 Statuses=0009 0009 14:09:32 Msec=2250 True Az=82.8 Ze=-25.935 Az status=0009 Ze status=0009 14:09:32 Check angles 14:09:32 SkyScan query 14:09:33 SkyScan query done: ret=0 az=65.34<-4356 ze=-38.58<-14572 Statuses=0009 0008 14:09:33 Msec=3000 True Az=65.34 Ze=-38.58 Az status=0009 Ze status=0008 14:09:33 Check angles 14:09:33 SkyScan query 14:09:34 SkyScan query done: ret=0 az=47.925<-3195 ze=-38.52<-14568 Statuses=0009 0008 14:09:34 Msec=3750 True Az=47.925 Ze=-38.52 Az status=0009 Ze status=0008 14:09:34 Check angles 14:09:34 SkyScan query 14:09:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:09:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:09:35 Message to Master queued w/err=0: serial=223820 error=0 14:09:40 Received message from Master: op=Filter serial=223821 14:09:40 Color wheel filter change from 0 to 0 14:09:40 FLIGetFilterPos err=0 currentPosition=0 14:09:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:40 Filter is already there-color wheel unchanged 14:09:40 Received message from Master: op=Shutter serial=223822 14:09:40 Shutter LASER close 14:09:40 Received message from Camera: op=State serial=223824 14:09:40 GetSingleValue result=40 Value=cccccccc 14:09:40 SkyScan query 14:09:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:09:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:40 Parameters OK 14:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:40 Set A/D data flow result=40 14:09:40 Set A/D channel type result=40 14:09:40 Set A/D encoding result=40 14:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:40 Set channel filter=0.000000e+000 result=40 14:09:40 Config A/D Result=40 14:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:40 Get A/D filter: -9.255963e+061 result=40 14:09:40 Get A/D value=-858993460 result=40 14:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:40 Parameters OK 14:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:40 Set A/D data flow result=40 14:09:40 Set A/D channel type result=40 14:09:40 Set A/D encoding result=40 14:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:40 Set channel filter=0.000000e+000 result=40 14:09:40 Config A/D Result=40 14:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:40 Get A/D filter: -9.255963e+061 result=40 14:09:40 Get A/D value=-858993460 result=40 14:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:40 Aux= 14:09:40 Message to Camera, serial 223824 queued 14:10:17 Received message from Master: op=PointingHead serial=223837 14:10:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:10:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:10:17 Point started: ret=0 14:10:17 point_skyscan result=0 14:10:18 Check angles 14:10:18 SkyScan query 14:10:19 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.145<-16543 Statuses=0009 0009 14:10:19 Msec=0 True Az=63.87 Ze=-68.145 Az status=0009 Ze status=0009 14:10:19 Check angles 14:10:19 SkyScan query 14:10:20 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.565<-17971 Statuses=0009 0009 14:10:20 Msec=750 True Az=81.585 Ze=-89.565 Az status=0009 Ze status=0009 14:10:20 Check angles 14:10:20 SkyScan query 14:10:20 SkyScan query done: ret=0 az=99.63<-6642 ze=-110.925<-19395 Statuses=0009 0009 14:10:20 Msec=1500 True Az=99.63 Ze=-110.925 Az status=0009 Ze status=0009 14:10:21 Check angles 14:10:21 SkyScan query 14:10:21 SkyScan query done: ret=0 az=117.075<-7805 ze=-131.835<-20789 Statuses=0009 0009 14:10:21 Msec=2250 True Az=117.075 Ze=-131.835 Az status=0009 Ze status=0009 14:10:21 Check angles 14:10:21 SkyScan query 14:10:22 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 14:10:22 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 14:10:22 Check angles 14:10:22 SkyScan query 14:10:23 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:10:23 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:10:23 Message to Master queued w/err=0: serial=223837 error=0 14:10:28 Received message from Master: op=Filter serial=223838 14:10:28 Color wheel filter change from 0 to 0 14:10:28 FLIGetFilterPos err=0 currentPosition=0 14:10:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:28 Filter is already there-color wheel unchanged 14:10:28 Received message from Master: op=Shutter serial=223839 14:10:28 Shutter LASER close 14:10:28 Received message from Camera: op=State serial=223841 14:10:28 GetSingleValue result=40 Value=cccccccc 14:10:28 SkyScan query 14:10:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:10:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:28 Parameters OK 14:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:28 Set A/D data flow result=40 14:10:28 Set A/D channel type result=40 14:10:28 Set A/D encoding result=40 14:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:28 Set channel filter=0.000000e+000 result=40 14:10:28 Config A/D Result=40 14:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:28 Get A/D filter: -9.255963e+061 result=40 14:10:28 Get A/D value=-858993460 result=40 14:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:28 Parameters OK 14:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:28 Set A/D data flow result=40 14:10:28 Set A/D channel type result=40 14:10:28 Set A/D encoding result=40 14:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:28 Set channel filter=0.000000e+000 result=40 14:10:28 Config A/D Result=40 14:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:28 Get A/D filter: -9.255963e+061 result=40 14:10:28 Get A/D value=-858993460 result=40 14:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:28 Aux= 14:10:28 Message to Camera, serial 223841 queued 14:11:05 Received message from Master: op=PointingHead serial=223854 14:11:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:11:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:11:06 Point started: ret=0 14:11:06 point_skyscan result=0 14:11:06 Check angles 14:11:06 SkyScan query 14:11:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 14:11:07 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 14:11:07 Check angles 14:11:07 SkyScan query 14:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:11:08 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:11:08 Message to Master queued w/err=0: serial=223854 error=0 14:11:13 Received message from Master: op=Filter serial=223855 14:11:13 Color wheel filter change from 0 to 0 14:11:13 FLIGetFilterPos err=0 currentPosition=0 14:11:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:13 Filter is already there-color wheel unchanged 14:11:13 Received message from Master: op=Shutter serial=223856 14:11:13 Shutter LASER open 14:11:13 Received message from Camera: op=State serial=223858 14:11:13 GetSingleValue result=40 Value=cccccccc 14:11:13 SkyScan query 14:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:11:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:14 Parameters OK 14:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:14 Set A/D data flow result=40 14:11:14 Set A/D channel type result=40 14:11:14 Set A/D encoding result=40 14:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:14 Set channel filter=0.000000e+000 result=40 14:11:14 Config A/D Result=40 14:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:14 Get A/D filter: -9.255963e+061 result=40 14:11:14 Get A/D value=-858993460 result=40 14:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:14 Parameters OK 14:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:14 Set A/D data flow result=40 14:11:14 Set A/D channel type result=40 14:11:14 Set A/D encoding result=40 14:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:14 Set channel filter=0.000000e+000 result=40 14:11:14 Config A/D Result=40 14:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:14 Get A/D filter: -9.255963e+061 result=40 14:11:14 Get A/D value=-858993460 result=40 14:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:14 Aux= 14:11:14 Message to Camera, serial 223858 queued 14:11:22 Received message from Master: op=Shutter serial=223868 14:11:22 Shutter LASER close 14:11:23 Received message from Master: op=PointingHead serial=223872 14:11:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:11:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:11:23 Point started: ret=0 14:11:23 point_skyscan result=0 14:11:24 Check angles 14:11:24 SkyScan query 14:11:24 SkyScan query done: ret=0 az=136.14<-9076 ze=-143.115<-21541 Statuses=0009 0009 14:11:24 Msec=0 True Az=136.14 Ze=-143.115 Az status=0009 Ze status=0009 14:11:24 Check angles 14:11:24 SkyScan query 14:11:25 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.13<-20142 Statuses=0009 0009 14:11:25 Msec=750 True Az=153.57 Ze=-122.13 Az status=0009 Ze status=0009 14:11:25 Check angles 14:11:25 SkyScan query 14:11:26 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.22<-18748 Statuses=0009 0009 14:11:26 Msec=1500 True Az=171.06 Ze=-101.22 Az status=0009 Ze status=0009 14:11:26 Check angles 14:11:26 SkyScan query 14:11:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.28<-17352 Statuses=0008 0009 14:11:27 Msec=2250 True Az=175.995 Ze=-80.28 Az status=0008 Ze status=0009 14:11:27 Check angles 14:11:27 SkyScan query 14:11:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.325<-15955 Statuses=0008 0009 14:11:27 Msec=3000 True Az=176.01 Ze=-59.325 Az status=0008 Ze status=0009 14:11:27 Check angles 14:11:27 SkyScan query 14:11:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:11:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:11:28 Message to Master queued w/err=0: serial=223872 error=0 14:11:33 Received message from Master: op=Filter serial=223873 14:11:33 Color wheel filter change from 0 to 0 14:11:33 FLIGetFilterPos err=0 currentPosition=0 14:11:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:33 Filter is already there-color wheel unchanged 14:11:33 Received message from Master: op=Shutter serial=223874 14:11:33 Shutter LASER close 14:11:33 Received message from Camera: op=State serial=223876 14:11:33 GetSingleValue result=40 Value=cccccccc 14:11:33 SkyScan query 14:11:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:11:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:34 Parameters OK 14:11:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:34 Set A/D data flow result=40 14:11:34 Set A/D channel type result=40 14:11:34 Set A/D encoding result=40 14:11:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:34 Set channel filter=0.000000e+000 result=40 14:11:34 Config A/D Result=40 14:11:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:34 Get A/D filter: -9.255963e+061 result=40 14:11:34 Get A/D value=-858993460 result=40 14:11:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:34 Parameters OK 14:11:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:34 Set A/D data flow result=40 14:11:34 Set A/D channel type result=40 14:11:34 Set A/D encoding result=40 14:11:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:34 Set channel filter=0.000000e+000 result=40 14:11:34 Config A/D Result=40 14:11:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:34 Get A/D filter: -9.255963e+061 result=40 14:11:34 Get A/D value=-858993460 result=40 14:11:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:34 Aux= 14:11:34 Message to Camera, serial 223876 queued 14:12:11 Received message from Master: op=PointingHead serial=223889 14:12:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:12:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:12:11 Point started: ret=0 14:12:11 point_skyscan result=0 14:12:12 Check angles 14:12:12 SkyScan query 14:12:13 SkyScan query done: ret=0 az=153.15<-10210 ze=-21.96<-13464 Statuses=0009 0009 14:12:13 Msec=0 True Az=153.15 Ze=-21.96 Az status=0009 Ze status=0009 14:12:13 Check angles 14:12:13 SkyScan query 14:12:13 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.975<-12065 Statuses=0009 0009 14:12:13 Msec=750 True Az=135.72 Ze=-0.975 Az status=0009 Ze status=0009 14:12:13 Check angles 14:12:13 SkyScan query 14:12:14 SkyScan query done: ret=0 az=118.2<-7880 ze=19.965<-10669 Statuses=0009 0009 14:12:14 Msec=1500 True Az=118.2 Ze=19.965 Az status=0009 Ze status=0009 14:12:14 Check angles 14:12:14 SkyScan query 14:12:15 SkyScan query done: ret=0 az=100.83<-6722 ze=40.935<-9271 Statuses=0009 0009 14:12:15 Msec=2250 True Az=100.83 Ze=40.935 Az status=0009 Ze status=0009 14:12:15 Check angles 14:12:15 SkyScan query 14:12:16 SkyScan query done: ret=0 az=85.95<-5730 ze=51.54<-8564 Statuses=0009 0008 14:12:16 Msec=3000 True Az=85.95 Ze=51.54 Az status=0009 Ze status=0008 14:12:16 Check angles 14:12:16 SkyScan query 14:12:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:12:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:12:16 Message to Master queued w/err=0: serial=223889 error=0 14:12:21 Received message from Master: op=Filter serial=223890 14:12:21 Color wheel filter change from 0 to 0 14:12:21 FLIGetFilterPos err=0 currentPosition=0 14:12:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:21 Filter is already there-color wheel unchanged 14:12:21 Received message from Master: op=Shutter serial=223891 14:12:21 Shutter LASER close 14:12:21 Received message from Camera: op=State serial=223893 14:12:21 GetSingleValue result=40 Value=cccccccc 14:12:21 SkyScan query 14:12:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:12:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:22 Parameters OK 14:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:22 Set A/D data flow result=40 14:12:22 Set A/D channel type result=40 14:12:22 Set A/D encoding result=40 14:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:22 Set channel filter=0.000000e+000 result=40 14:12:22 Config A/D Result=40 14:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:22 Get A/D filter: -9.255963e+061 result=40 14:12:22 Get A/D value=-858993460 result=40 14:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:22 Parameters OK 14:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:22 Set A/D data flow result=40 14:12:22 Set A/D channel type result=40 14:12:22 Set A/D encoding result=40 14:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:22 Set channel filter=0.000000e+000 result=40 14:12:22 Config A/D Result=40 14:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:22 Get A/D filter: -9.255963e+061 result=40 14:12:22 Get A/D value=-858993460 result=40 14:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:22 Aux= 14:12:22 Message to Camera, serial 223893 queued 14:12:59 Received message from Master: op=PointingHead serial=223906 14:12:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:12:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:12:59 Point started: ret=0 14:12:59 point_skyscan result=0 14:13:00 Check angles 14:13:00 SkyScan query 14:13:01 SkyScan query done: ret=0 az=108.795<-7253 ze=38.475<-9435 Statuses=0009 0008 14:13:01 Msec=0 True Az=108.795 Ze=38.475 Az status=0009 Ze status=0008 14:13:01 Check angles 14:13:01 SkyScan query 14:13:01 SkyScan query done: ret=0 az=126.285<-8419 ze=38.505<-9433 Statuses=0009 0008 14:13:01 Msec=750 True Az=126.285 Ze=38.505 Az status=0009 Ze status=0008 14:13:01 Check angles 14:13:01 SkyScan query 14:13:02 SkyScan query done: ret=0 az=143.82<-9588 ze=38.505<-9433 Statuses=0009 0008 14:13:02 Msec=1500 True Az=143.82 Ze=38.505 Az status=0009 Ze status=0008 14:13:02 Check angles 14:13:02 SkyScan query 14:13:03 SkyScan query done: ret=0 az=161.1<-10740 ze=38.505<-9433 Statuses=0009 0008 14:13:03 Msec=2250 True Az=161.1 Ze=38.505 Az status=0009 Ze status=0008 14:13:03 Check angles 14:13:03 SkyScan query 14:13:04 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:13:04 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:13:04 Check angles 14:13:04 SkyScan query 14:13:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:13:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:13:04 Message to Master queued w/err=0: serial=223906 error=0 14:13:09 Received message from Master: op=Filter serial=223907 14:13:09 Color wheel filter change from 0 to 0 14:13:09 FLIGetFilterPos err=0 currentPosition=0 14:13:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:09 Filter is already there-color wheel unchanged 14:13:09 Received message from Master: op=Shutter serial=223908 14:13:09 Shutter LASER close 14:13:10 Received message from Camera: op=State serial=223910 14:13:10 GetSingleValue result=40 Value=cccccccc 14:13:10 SkyScan query 14:13:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:13:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:10 Parameters OK 14:13:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:10 Set A/D data flow result=40 14:13:10 Set A/D channel type result=40 14:13:10 Set A/D encoding result=40 14:13:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:10 Set channel filter=0.000000e+000 result=40 14:13:10 Config A/D Result=40 14:13:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:10 Get A/D filter: -9.255963e+061 result=40 14:13:10 Get A/D value=-858993460 result=40 14:13:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:10 Parameters OK 14:13:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:10 Set A/D data flow result=40 14:13:10 Set A/D channel type result=40 14:13:10 Set A/D encoding result=40 14:13:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:10 Set channel filter=0.000000e+000 result=40 14:13:10 Config A/D Result=40 14:13:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:10 Get A/D filter: -9.255963e+061 result=40 14:13:10 Get A/D value=-858993460 result=40 14:13:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:10 Aux= 14:13:10 Message to Camera, serial 223910 queued 14:13:47 Received message from Master: op=PointingHead serial=223923 14:13:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:13:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:13:47 Point started: ret=0 14:13:47 point_skyscan result=0 14:13:48 Check angles 14:13:48 SkyScan query 14:13:49 SkyScan query done: ret=0 az=152.94<-10196 ze=8.55<-11430 Statuses=0009 0009 14:13:49 Msec=0 True Az=152.94 Ze=8.55 Az status=0009 Ze status=0009 14:13:49 Check angles 14:13:49 SkyScan query 14:13:49 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.36<-12824 Statuses=0009 0009 14:13:49 Msec=750 True Az=135.465 Ze=-12.36 Az status=0009 Ze status=0009 14:13:50 Check angles 14:13:50 SkyScan query 14:13:50 SkyScan query done: ret=0 az=117.855<-7857 ze=-33.33<-14222 Statuses=0009 0009 14:13:50 Msec=1500 True Az=117.855 Ze=-33.33 Az status=0009 Ze status=0009 14:13:50 Check angles 14:13:50 SkyScan query 14:13:51 SkyScan query done: ret=0 az=100.5<-6700 ze=-51.54<-15436 Statuses=0009 0009 14:13:51 Msec=2250 True Az=100.5 Ze=-51.54 Az status=0009 Ze status=0009 14:13:51 Check angles 14:13:51 SkyScan query 14:13:52 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:13:52 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:13:52 Check angles 14:13:52 SkyScan query 14:13:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:13:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:13:52 Message to Master queued w/err=0: serial=223923 error=0 14:13:57 Received message from Master: op=Filter serial=223924 14:13:57 Color wheel filter change from 0 to 0 14:13:57 FLIGetFilterPos err=0 currentPosition=0 14:13:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:57 Filter is already there-color wheel unchanged 14:13:58 Received message from Master: op=Shutter serial=223925 14:13:58 Shutter LASER close 14:13:58 Received message from Camera: op=State serial=223927 14:13:58 GetSingleValue result=40 Value=cccccccc 14:13:58 SkyScan query 14:13:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:13:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:58 Parameters OK 14:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:58 Set A/D data flow result=40 14:13:58 Set A/D channel type result=40 14:13:58 Set A/D encoding result=40 14:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:58 Set channel filter=0.000000e+000 result=40 14:13:58 Config A/D Result=40 14:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:58 Get A/D filter: -9.255963e+061 result=40 14:13:58 Get A/D value=-858993460 result=40 14:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:58 Parameters OK 14:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:58 Set A/D data flow result=40 14:13:58 Set A/D channel type result=40 14:13:58 Set A/D encoding result=40 14:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:58 Set channel filter=0.000000e+000 result=40 14:13:58 Config A/D Result=40 14:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:58 Get A/D filter: -9.255963e+061 result=40 14:13:58 Get A/D value=-858993460 result=40 14:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:58 Aux= 14:13:58 Message to Camera, serial 223927 queued 14:14:35 Received message from Master: op=PointingHead serial=223940 14:14:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:14:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:14:35 Point started: ret=0 14:14:35 point_skyscan result=0 14:14:36 Check angles 14:14:36 SkyScan query 14:14:37 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.495<-17433 Statuses=0009 0009 14:14:37 Msec=0 True Az=109.17 Ze=-81.495 Az status=0009 Ze status=0009 14:14:37 Check angles 14:14:37 SkyScan query 14:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.435<-18829 Statuses=0008 0009 14:14:37 Msec=750 True Az=112.995 Ze=-102.435 Az status=0008 Ze status=0009 14:14:38 Check angles 14:14:38 SkyScan query 14:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 14:14:38 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 14:14:38 Check angles 14:14:38 SkyScan query 14:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 14:14:39 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 14:14:39 Check angles 14:14:39 SkyScan query 14:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 14:14:40 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 14:14:40 Check angles 14:14:40 SkyScan query 14:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:14:40 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:14:40 Message to Master queued w/err=0: serial=223940 error=0 14:14:45 Received message from Master: op=Filter serial=223941 14:14:45 Color wheel filter change from 0 to 0 14:14:45 FLIGetFilterPos err=0 currentPosition=0 14:14:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:45 Filter is already there-color wheel unchanged 14:14:46 Received message from Master: op=Shutter serial=223942 14:14:46 Shutter LASER open 14:14:46 Received message from Camera: op=State serial=223944 14:14:46 GetSingleValue result=40 Value=cccccccc 14:14:46 SkyScan query 14:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:14:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:46 Parameters OK 14:14:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:46 Set A/D data flow result=40 14:14:46 Set A/D channel type result=40 14:14:46 Set A/D encoding result=40 14:14:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:46 Set channel filter=0.000000e+000 result=40 14:14:46 Config A/D Result=40 14:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:46 Get A/D filter: -9.255963e+061 result=40 14:14:46 Get A/D value=-858993460 result=40 14:14:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:46 Parameters OK 14:14:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:46 Set A/D data flow result=40 14:14:46 Set A/D channel type result=40 14:14:46 Set A/D encoding result=40 14:14:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:46 Set channel filter=0.000000e+000 result=40 14:14:46 Config A/D Result=40 14:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:46 Get A/D filter: -9.255963e+061 result=40 14:14:46 Get A/D value=-858993460 result=40 14:14:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:46 Aux= 14:14:46 Message to Camera, serial 223944 queued 14:14:55 Received message from Master: op=Shutter serial=223954 14:14:55 Shutter LASER close 14:14:55 Received message from Master: op=PointingHead serial=223958 14:14:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:14:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:14:56 Point started: ret=0 14:14:56 point_skyscan result=0 14:14:56 Check angles 14:14:56 SkyScan query 14:14:57 SkyScan query done: ret=0 az=89.865<-5991 ze=157.245<-1517 Statuses=0009 0009 14:14:57 Msec=0 True Az=89.865 Ze=157.245 Az status=0009 Ze status=0009 14:14:57 Check angles 14:14:57 SkyScan query 14:14:58 SkyScan query done: ret=0 az=72.045<-4803 ze=135.855<-2943 Statuses=0009 0009 14:14:58 Msec=750 True Az=72.045 Ze=135.855 Az status=0009 Ze status=0009 14:14:58 Check angles 14:14:58 SkyScan query 14:14:58 SkyScan query done: ret=0 az=54.345<-3623 ze=114.435<-4371 Statuses=0009 0009 14:14:58 Msec=1500 True Az=54.345 Ze=114.435 Az status=0009 Ze status=0009 14:14:59 Check angles 14:14:59 SkyScan query 14:14:59 SkyScan query done: ret=0 az=41.025<-2735 ze=93.495<-5767 Statuses=0009 0009 14:14:59 Msec=2250 True Az=41.025 Ze=93.495 Az status=0009 Ze status=0009 14:14:59 Check angles 14:14:59 SkyScan query 14:15:00 SkyScan query done: ret=0 az=40.98<-2732 ze=72.51<-7166 Statuses=0008 0009 14:15:00 Msec=3000 True Az=40.98 Ze=72.51 Az status=0008 Ze status=0009 14:15:00 Check angles 14:15:00 SkyScan query 14:15:01 SkyScan query done: ret=0 az=40.98<-2732 ze=52.305<-8513 Statuses=0008 0009 14:15:01 Msec=3750 True Az=40.98 Ze=52.305 Az status=0008 Ze status=0009 14:15:01 Check angles 14:15:01 SkyScan query 14:15:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:15:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:15:01 Message to Master queued w/err=0: serial=223958 error=0 14:15:06 Received message from Master: op=Filter serial=223959 14:15:06 Color wheel filter change from 0 to 0 14:15:06 FLIGetFilterPos err=0 currentPosition=0 14:15:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:06 Filter is already there-color wheel unchanged 14:15:07 Received message from Master: op=Shutter serial=223960 14:15:07 Shutter LASER close 14:15:07 Received message from Camera: op=State serial=223962 14:15:07 GetSingleValue result=40 Value=cccccccc 14:15:07 SkyScan query 14:15:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:15:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:07 Parameters OK 14:15:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:07 Set A/D data flow result=40 14:15:07 Set A/D channel type result=40 14:15:07 Set A/D encoding result=40 14:15:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:07 Set channel filter=0.000000e+000 result=40 14:15:07 Config A/D Result=40 14:15:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:07 Get A/D filter: -9.255963e+061 result=40 14:15:07 Get A/D value=-858993460 result=40 14:15:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:07 Parameters OK 14:15:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:07 Set A/D data flow result=40 14:15:07 Set A/D channel type result=40 14:15:07 Set A/D encoding result=40 14:15:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:07 Set channel filter=0.000000e+000 result=40 14:15:07 Config A/D Result=40 14:15:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:07 Get A/D filter: -9.255963e+061 result=40 14:15:07 Get A/D value=-858993460 result=40 14:15:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:07 Aux= 14:15:07 Message to Camera, serial 223962 queued 14:15:27 Received message from Master: op=Identify serial=223963 14:15:44 Received message from Master: op=PointingHead serial=223978 14:15:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:15:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:15:45 Point started: ret=0 14:15:45 point_skyscan result=0 14:15:45 Check angles 14:15:45 SkyScan query 14:15:46 SkyScan query done: ret=0 az=64.455<-4297 ze=66.54<-7564 Statuses=0009 0008 14:15:46 Msec=0 True Az=64.455 Ze=66.54 Az status=0009 Ze status=0008 14:15:46 Check angles 14:15:46 SkyScan query 14:15:47 SkyScan query done: ret=0 az=82.095<-5473 ze=66.495<-7567 Statuses=0009 0008 14:15:47 Msec=750 True Az=82.095 Ze=66.495 Az status=0009 Ze status=0008 14:15:47 Check angles 14:15:47 SkyScan query 14:15:47 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 14:15:47 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-17 14:15:48] 14:15:48 Check angles 14:15:48 SkyScan query 14:15:48 SkyScan query done: ret=0 az=118.53<-7902 ze=66.495<-7567 Statuses=0009 0008 14:15:48 Msec=2250 True Az=118.53 Ze=66.495 Az status=0009 Ze status=0008 14:15:48 Check angles 14:15:48 SkyScan query 14:15:49 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 14:15:49 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 14:15:49 Check angles 14:15:49 SkyScan query 14:15:50 SkyScan query done: ret=0 az=151.875<-10125 ze=66.495<-7567 Statuses=0009 0008 14:15:50 Msec=3750 True Az=151.875 Ze=66.495 Az status=0009 Ze status=0008 14:15:50 Check angles 14:15:50 SkyScan query 14:15:50 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:15:50 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:15:50 Message to Master queued w/err=0: serial=223978 error=0 [UTC 2018-12-17 14:15:52] 14:15:55 Received message from Master: op=Filter serial=223979 14:15:55 Color wheel filter change from 0 to 0 14:15:55 FLIGetFilterPos err=0 currentPosition=0 14:15:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:55 Filter is already there-color wheel unchanged 14:15:56 Received message from Master: op=Shutter serial=223980 14:15:56 Shutter LASER close 14:15:56 Received message from Camera: op=State serial=223982 14:15:56 GetSingleValue result=40 Value=cccccccc 14:15:56 SkyScan query 14:15:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:15:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:56 Parameters OK 14:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:56 Set A/D data flow result=40 14:15:56 Set A/D channel type result=40 14:15:56 Set A/D encoding result=40 14:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:56 Set channel filter=0.000000e+000 result=40 14:15:56 Config A/D Result=40 14:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:56 Get A/D filter: -9.255963e+061 result=40 14:15:56 Get A/D value=-858993460 result=40 14:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:56 Parameters OK 14:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:56 Set A/D data flow result=40 14:15:56 Set A/D channel type result=40 14:15:56 Set A/D encoding result=40 14:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:56 Set channel filter=0.000000e+000 result=40 14:15:56 Config A/D Result=40 14:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:56 Get A/D filter: -9.255963e+061 result=40 14:15:56 Get A/D value=-858993460 result=40 14:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:56 Aux= 14:15:56 Message to Camera, serial 223982 queued 14:16:33 Received message from Master: op=PointingHead serial=223995 14:16:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:16:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:16:33 Point started: ret=0 14:16:33 point_skyscan result=0 14:16:34 Check angles 14:16:34 SkyScan query 14:16:35 SkyScan query done: ret=0 az=135.18<-9012 ze=36.9<-9540 Statuses=0009 0009 14:16:35 Msec=0 True Az=135.18 Ze=36.9 Az status=0009 Ze status=0009 14:16:35 Check angles 14:16:35 SkyScan query 14:16:35 SkyScan query done: ret=0 az=117.675<-7845 ze=15.93<-10938 Statuses=0009 0009 14:16:35 Msec=750 True Az=117.675 Ze=15.93 Az status=0009 Ze status=0009 14:16:36 Check angles 14:16:36 SkyScan query 14:16:36 SkyScan query done: ret=0 az=100.305<-6687 ze=-5.01<-12334 Statuses=0009 0009 14:16:36 Msec=1500 True Az=100.305 Ze=-5.01 Az status=0009 Ze status=0009 14:16:36 Check angles 14:16:36 SkyScan query 14:16:37 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.37<-13758 Statuses=0009 0009 14:16:37 Msec=2250 True Az=82.41 Ze=-26.37 Az status=0009 Ze status=0009 14:16:37 Check angles 14:16:37 SkyScan query 14:16:38 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.565<-14571 Statuses=0009 0008 14:16:38 Msec=3000 True Az=64.815 Ze=-38.565 Az status=0009 Ze status=0008 14:16:38 Check angles 14:16:38 SkyScan query 14:16:39 SkyScan query done: ret=0 az=47.46<-3164 ze=-38.535<-14569 Statuses=0009 0008 14:16:39 Msec=3750 True Az=47.46 Ze=-38.535 Az status=0009 Ze status=0008 14:16:39 Check angles 14:16:39 SkyScan query 14:16:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:16:39 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:16:39 Message to Master queued w/err=0: serial=223995 error=0 14:16:44 Received message from Master: op=Filter serial=223996 14:16:44 Color wheel filter change from 0 to 0 14:16:44 FLIGetFilterPos err=0 currentPosition=0 14:16:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:44 Filter is already there-color wheel unchanged 14:16:44 Received message from Master: op=Shutter serial=223997 14:16:44 Shutter LASER close 14:16:44 Received message from Camera: op=State serial=223999 14:16:44 GetSingleValue result=40 Value=cccccccc 14:16:44 SkyScan query 14:16:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:16:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:45 Parameters OK 14:16:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:45 Set A/D data flow result=40 14:16:45 Set A/D channel type result=40 14:16:45 Set A/D encoding result=40 14:16:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:45 Set channel filter=0.000000e+000 result=40 14:16:45 Config A/D Result=40 14:16:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:45 Get A/D filter: -9.255963e+061 result=40 14:16:45 Get A/D value=-858993460 result=40 14:16:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:45 Parameters OK 14:16:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:45 Set A/D data flow result=40 14:16:45 Set A/D channel type result=40 14:16:45 Set A/D encoding result=40 14:16:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:45 Set channel filter=0.000000e+000 result=40 14:16:45 Config A/D Result=40 14:16:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:45 Get A/D filter: -9.255963e+061 result=40 14:16:45 Get A/D value=-858993460 result=40 14:16:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:45 Aux= 14:16:45 Message to Camera, serial 223999 queued 14:17:22 Received message from Master: op=PointingHead serial=224012 14:17:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:17:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:17:22 Point started: ret=0 14:17:22 point_skyscan result=0 14:17:23 Check angles 14:17:23 SkyScan query 14:17:24 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.37<-16558 Statuses=0009 0009 14:17:24 Msec=0 True Az=64.02 Ze=-68.37 Az status=0009 Ze status=0009 14:17:24 Check angles 14:17:24 SkyScan query 14:17:24 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.355<-17957 Statuses=0009 0009 14:17:24 Msec=750 True Az=81.36 Ze=-89.355 Az status=0009 Ze status=0009 14:17:25 Check angles 14:17:25 SkyScan query 14:17:25 SkyScan query done: ret=0 az=98.97<-6598 ze=-110.295<-19353 Statuses=0009 0009 14:17:25 Msec=1500 True Az=98.97 Ze=-110.295 Az status=0009 Ze status=0009 14:17:25 Check angles 14:17:25 SkyScan query 14:17:26 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.22<-20748 Statuses=0009 0009 14:17:26 Msec=2250 True Az=116.445 Ze=-131.22 Az status=0009 Ze status=0009 14:17:26 Check angles 14:17:26 SkyScan query 14:17:27 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 14:17:27 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 14:17:27 Check angles 14:17:27 SkyScan query 14:17:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:17:27 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:17:27 Message to Master queued w/err=0: serial=224012 error=0 14:17:32 Received message from Master: op=Filter serial=224013 14:17:32 Color wheel filter change from 0 to 0 14:17:32 FLIGetFilterPos err=0 currentPosition=0 14:17:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:32 Filter is already there-color wheel unchanged 14:17:33 Received message from Master: op=Shutter serial=224014 14:17:33 Shutter LASER close 14:17:33 Received message from Camera: op=State serial=224016 14:17:33 GetSingleValue result=40 Value=cccccccc 14:17:33 SkyScan query 14:17:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:17:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:33 Parameters OK 14:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:33 Set A/D data flow result=40 14:17:33 Set A/D channel type result=40 14:17:33 Set A/D encoding result=40 14:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:33 Set channel filter=0.000000e+000 result=40 14:17:33 Config A/D Result=40 14:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:33 Get A/D filter: -9.255963e+061 result=40 14:17:33 Get A/D value=-858993460 result=40 14:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:33 Parameters OK 14:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:33 Set A/D data flow result=40 14:17:33 Set A/D channel type result=40 14:17:33 Set A/D encoding result=40 14:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:33 Set channel filter=0.000000e+000 result=40 14:17:33 Config A/D Result=40 14:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:33 Get A/D filter: -9.255963e+061 result=40 14:17:33 Get A/D value=-858993460 result=40 14:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:33 Aux= 14:17:33 Message to Camera, serial 224016 queued 14:18:10 Received message from Master: op=PointingHead serial=224029 14:18:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:18:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:18:10 Point started: ret=0 14:18:10 point_skyscan result=0 14:18:11 Check angles 14:18:11 SkyScan query 14:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 14:18:12 Msec=0 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 14:18:12 Check angles 14:18:12 SkyScan query 14:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:18:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:18:12 Message to Master queued w/err=0: serial=224029 error=0 14:18:17 Received message from Master: op=Filter serial=224030 14:18:17 Color wheel filter change from 0 to 0 14:18:17 FLIGetFilterPos err=0 currentPosition=0 14:18:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:17 Filter is already there-color wheel unchanged 14:18:18 Received message from Master: op=Shutter serial=224031 14:18:18 Shutter LASER open 14:18:18 Received message from Camera: op=State serial=224033 14:18:18 GetSingleValue result=40 Value=cccccccc 14:18:18 SkyScan query 14:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:18:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:18 Parameters OK 14:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:18 Set A/D data flow result=40 14:18:18 Set A/D channel type result=40 14:18:18 Set A/D encoding result=40 14:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:18 Set channel filter=0.000000e+000 result=40 14:18:18 Config A/D Result=40 14:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:18 Get A/D filter: -9.255963e+061 result=40 14:18:18 Get A/D value=-858993460 result=40 14:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:18 Parameters OK 14:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:18 Set A/D data flow result=40 14:18:18 Set A/D channel type result=40 14:18:18 Set A/D encoding result=40 14:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:18 Set channel filter=0.000000e+000 result=40 14:18:18 Config A/D Result=40 14:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:18 Get A/D filter: -9.255963e+061 result=40 14:18:18 Get A/D value=-858993460 result=40 14:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:18 Aux= 14:18:18 Message to Camera, serial 224033 queued 14:18:27 Received message from Master: op=Shutter serial=224043 14:18:27 Shutter LASER close 14:18:27 Received message from Master: op=PointingHead serial=224047 14:18:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:18:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:18:28 Point started: ret=0 14:18:28 point_skyscan result=0 14:18:29 Check angles 14:18:29 SkyScan query 14:18:29 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.845<-21523 Statuses=0009 0009 14:18:29 Msec=0 True Az=136.35 Ze=-142.845 Az status=0009 Ze status=0009 14:18:29 Check angles 14:18:29 SkyScan query 14:18:30 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.89<-20126 Statuses=0009 0009 14:18:30 Msec=750 True Az=153.75 Ze=-121.89 Az status=0009 Ze status=0009 14:18:30 Check angles 14:18:30 SkyScan query 14:18:31 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.935<-18729 Statuses=0009 0009 14:18:31 Msec=1500 True Az=171.36 Ze=-100.935 Az status=0009 Ze status=0009 14:18:31 Check angles 14:18:31 SkyScan query 14:18:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.04<-17336 Statuses=0008 0009 14:18:31 Msec=2250 True Az=175.995 Ze=-80.04 Az status=0008 Ze status=0009 14:18:32 Check angles 14:18:32 SkyScan query 14:18:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.04<-15936 Statuses=0008 0009 14:18:32 Msec=3000 True Az=175.995 Ze=-59.04 Az status=0008 Ze status=0009 14:18:32 Check angles 14:18:32 SkyScan query 14:18:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 14:18:33 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 14:18:33 Message to Master queued w/err=0: serial=224047 error=0 14:18:38 Received message from Master: op=Filter serial=224048 14:18:38 Color wheel filter change from 0 to 0 14:18:38 FLIGetFilterPos err=0 currentPosition=0 14:18:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:38 Filter is already there-color wheel unchanged 14:18:38 Received message from Master: op=Shutter serial=224049 14:18:38 Shutter LASER close 14:18:38 Received message from Camera: op=State serial=224051 14:18:38 GetSingleValue result=40 Value=cccccccc 14:18:38 SkyScan query 14:18:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:18:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:39 Parameters OK 14:18:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:39 Set A/D data flow result=40 14:18:39 Set A/D channel type result=40 14:18:39 Set A/D encoding result=40 14:18:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:39 Set channel filter=0.000000e+000 result=40 14:18:39 Config A/D Result=40 14:18:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:39 Get A/D filter: -9.255963e+061 result=40 14:18:39 Get A/D value=-858993460 result=40 14:18:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:39 Parameters OK 14:18:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:39 Set A/D data flow result=40 14:18:39 Set A/D channel type result=40 14:18:39 Set A/D encoding result=40 14:18:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:39 Set channel filter=0.000000e+000 result=40 14:18:39 Config A/D Result=40 14:18:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:39 Get A/D filter: -9.255963e+061 result=40 14:18:39 Get A/D value=-858993460 result=40 14:18:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:39 Aux= 14:18:39 Message to Camera, serial 224051 queued 14:19:16 Received message from Master: op=PointingHead serial=224064 14:19:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:19:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:19:16 Point started: ret=0 14:19:16 point_skyscan result=0 14:19:17 Check angles 14:19:17 SkyScan query 14:19:17 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.435<-13429 Statuses=0009 0009 14:19:17 Msec=0 True Az=152.73 Ze=-21.435 Az status=0009 Ze status=0009 14:19:17 Check angles 14:19:17 SkyScan query 14:19:18 SkyScan query done: ret=0 az=135.285<-9019 ze=-0.45<-12030 Statuses=0009 0009 14:19:18 Msec=750 True Az=135.285 Ze=-0.45 Az status=0009 Ze status=0009 14:19:18 Check angles 14:19:18 SkyScan query 14:19:19 SkyScan query done: ret=0 az=117.765<-7851 ze=20.475<-10635 Statuses=0009 0009 14:19:19 Msec=1500 True Az=117.765 Ze=20.475 Az status=0009 Ze status=0009 14:19:19 Check angles 14:19:19 SkyScan query 14:19:20 SkyScan query done: ret=0 az=100.425<-6695 ze=41.475<-9235 Statuses=0009 0009 14:19:20 Msec=2250 True Az=100.425 Ze=41.475 Az status=0009 Ze status=0009 14:19:20 Check angles 14:19:20 SkyScan query 14:19:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 14:19:20 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 14:19:20 Check angles 14:19:20 SkyScan query 14:19:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:19:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:19:21 Message to Master queued w/err=0: serial=224064 error=0 14:19:26 Received message from Master: op=Filter serial=224065 14:19:26 Color wheel filter change from 0 to 0 14:19:26 FLIGetFilterPos err=0 currentPosition=0 14:19:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:26 Filter is already there-color wheel unchanged 14:19:26 Received message from Master: op=Shutter serial=224066 14:19:26 Shutter LASER close 14:19:26 Received message from Camera: op=State serial=224068 14:19:26 GetSingleValue result=40 Value=cccccccc 14:19:26 SkyScan query 14:19:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:19:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:27 Parameters OK 14:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:27 Set A/D data flow result=40 14:19:27 Set A/D channel type result=40 14:19:27 Set A/D encoding result=40 14:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:27 Set channel filter=0.000000e+000 result=40 14:19:27 Config A/D Result=40 14:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:27 Get A/D filter: -9.255963e+061 result=40 14:19:27 Get A/D value=-858993460 result=40 14:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:27 Parameters OK 14:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:27 Set A/D data flow result=40 14:19:27 Set A/D channel type result=40 14:19:27 Set A/D encoding result=40 14:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:27 Set channel filter=0.000000e+000 result=40 14:19:27 Config A/D Result=40 14:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:27 Get A/D filter: -9.255963e+061 result=40 14:19:27 Get A/D value=-858993460 result=40 14:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:27 Aux= 14:19:27 Message to Camera, serial 224068 queued 14:20:04 Received message from Master: op=PointingHead serial=224081 14:20:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:20:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:20:04 Point started: ret=0 14:20:04 point_skyscan result=0 14:20:05 Check angles 14:20:05 SkyScan query 14:20:05 SkyScan query done: ret=0 az=109.335<-7289 ze=38.475<-9435 Statuses=0009 0008 14:20:05 Msec=0 True Az=109.335 Ze=38.475 Az status=0009 Ze status=0008 14:20:06 Check angles 14:20:06 SkyScan query 14:20:06 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 14:20:06 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 14:20:06 Check angles 14:20:06 SkyScan query 14:20:07 SkyScan query done: ret=0 az=144.315<-9621 ze=38.505<-9433 Statuses=0009 0008 14:20:07 Msec=1500 True Az=144.315 Ze=38.505 Az status=0009 Ze status=0008 14:20:07 Check angles 14:20:07 SkyScan query 14:20:08 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 14:20:08 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 14:20:08 Check angles 14:20:08 SkyScan query 14:20:08 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:20:08 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:20:09 Check angles 14:20:09 SkyScan query 14:20:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:20:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:20:09 Message to Master queued w/err=0: serial=224081 error=0 14:20:14 Received message from Master: op=Filter serial=224082 14:20:14 Color wheel filter change from 0 to 0 14:20:14 FLIGetFilterPos err=0 currentPosition=0 14:20:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:14 Filter is already there-color wheel unchanged 14:20:14 Received message from Master: op=Shutter serial=224083 14:20:14 Shutter LASER close 14:20:14 Received message from Camera: op=State serial=224085 14:20:14 GetSingleValue result=40 Value=cccccccc 14:20:14 SkyScan query 14:20:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:20:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:15 Parameters OK 14:20:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:15 Set A/D data flow result=40 14:20:15 Set A/D channel type result=40 14:20:15 Set A/D encoding result=40 14:20:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:15 Set channel filter=0.000000e+000 result=40 14:20:15 Config A/D Result=40 14:20:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:15 Get A/D filter: -9.255963e+061 result=40 14:20:15 Get A/D value=-858993460 result=40 14:20:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:15 Parameters OK 14:20:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:15 Set A/D data flow result=40 14:20:15 Set A/D channel type result=40 14:20:15 Set A/D encoding result=40 14:20:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:15 Set channel filter=0.000000e+000 result=40 14:20:15 Config A/D Result=40 14:20:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:15 Get A/D filter: -9.255963e+061 result=40 14:20:15 Get A/D value=-858993460 result=40 14:20:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:15 Aux= 14:20:15 Message to Camera, serial 224085 queued 14:20:52 Received message from Master: op=PointingHead serial=224098 14:20:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:20:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:20:52 Point started: ret=0 14:20:52 point_skyscan result=0 14:20:53 Check angles 14:20:53 SkyScan query 14:20:53 SkyScan query done: ret=0 az=152.745<-10183 ze=8.295<-11447 Statuses=0009 0009 14:20:53 Msec=0 True Az=152.745 Ze=8.295 Az status=0009 Ze status=0009 14:20:54 Check angles 14:20:54 SkyScan query 14:20:54 SkyScan query done: ret=0 az=135.225<-9015 ze=-12.63<-12842 Statuses=0009 0009 14:20:54 Msec=750 True Az=135.225 Ze=-12.63 Az status=0009 Ze status=0009 14:20:54 Check angles 14:20:54 SkyScan query 14:20:55 SkyScan query done: ret=0 az=117.66<-7844 ze=-33.6<-14240 Statuses=0009 0009 14:20:55 Msec=1500 True Az=117.66 Ze=-33.6 Az status=0009 Ze status=0009 14:20:55 Check angles 14:20:55 SkyScan query 14:20:56 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 14:20:56 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 14:20:56 Check angles 14:20:56 SkyScan query 14:20:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 14:20:57 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 14:20:57 Check angles 14:20:57 SkyScan query 14:20:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:20:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:20:57 Message to Master queued w/err=0: serial=224098 error=0 14:21:02 Received message from Master: op=Filter serial=224099 14:21:02 Color wheel filter change from 0 to 0 14:21:02 FLIGetFilterPos err=0 currentPosition=0 14:21:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:02 Filter is already there-color wheel unchanged 14:21:02 Received message from Master: op=Shutter serial=224100 14:21:02 Shutter LASER close 14:21:02 Received message from Camera: op=State serial=224102 14:21:02 GetSingleValue result=40 Value=cccccccc 14:21:02 SkyScan query 14:21:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:21:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:03 Parameters OK 14:21:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:03 Set A/D data flow result=40 14:21:03 Set A/D channel type result=40 14:21:03 Set A/D encoding result=40 14:21:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:03 Set channel filter=0.000000e+000 result=40 14:21:03 Config A/D Result=40 14:21:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:03 Get A/D filter: -9.255963e+061 result=40 14:21:03 Get A/D value=-858993460 result=40 14:21:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:03 Parameters OK 14:21:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:03 Set A/D data flow result=40 14:21:03 Set A/D channel type result=40 14:21:03 Set A/D encoding result=40 14:21:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:03 Set channel filter=0.000000e+000 result=40 14:21:03 Config A/D Result=40 14:21:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:03 Get A/D filter: -9.255963e+061 result=40 14:21:03 Get A/D value=-858993460 result=40 14:21:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:03 Aux= 14:21:03 Message to Camera, serial 224102 queued 14:21:40 Received message from Master: op=PointingHead serial=224115 14:21:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:21:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:21:40 Point started: ret=0 14:21:40 point_skyscan result=0 14:21:41 Check angles 14:21:41 SkyScan query 14:21:42 SkyScan query done: ret=0 az=108.75<-7250 ze=-80.985<-17399 Statuses=0009 0009 14:21:42 Msec=0 True Az=108.75 Ze=-80.985 Az status=0009 Ze status=0009 14:21:42 Check angles 14:21:42 SkyScan query 14:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.925<-18795 Statuses=0008 0009 14:21:42 Msec=750 True Az=112.995 Ze=-101.925 Az status=0008 Ze status=0009 14:21:42 Check angles 14:21:42 SkyScan query 14:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 14:21:43 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 14:21:43 Check angles 14:21:43 SkyScan query 14:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.85<-21590 Statuses=0008 0009 14:21:44 Msec=2250 True Az=112.995 Ze=-143.85 Az status=0008 Ze status=0009 14:21:44 Check angles 14:21:44 SkyScan query 14:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.805<-22987 Statuses=0008 0009 14:21:45 Msec=3000 True Az=112.995 Ze=-164.805 Az status=0008 Ze status=0009 14:21:45 Check angles 14:21:45 SkyScan query 14:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:21:45 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:21:45 Message to Master queued w/err=0: serial=224115 error=0 14:21:50 Received message from Master: op=Filter serial=224116 14:21:50 Color wheel filter change from 0 to 0 14:21:50 FLIGetFilterPos err=0 currentPosition=0 14:21:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:50 Filter is already there-color wheel unchanged 14:21:51 Received message from Master: op=Shutter serial=224117 14:21:51 Shutter LASER open 14:21:51 Received message from Camera: op=State serial=224119 14:21:51 GetSingleValue result=40 Value=cccccccc 14:21:51 SkyScan query 14:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:21:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:51 Parameters OK 14:21:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:51 Set A/D data flow result=40 14:21:51 Set A/D channel type result=40 14:21:51 Set A/D encoding result=40 14:21:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:51 Set channel filter=0.000000e+000 result=40 14:21:51 Config A/D Result=40 14:21:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:51 Get A/D filter: -9.255963e+061 result=40 14:21:51 Get A/D value=-858993460 result=40 14:21:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:51 Parameters OK 14:21:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:51 Set A/D data flow result=40 14:21:51 Set A/D channel type result=40 14:21:51 Set A/D encoding result=40 14:21:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:51 Set channel filter=0.000000e+000 result=40 14:21:51 Config A/D Result=40 14:21:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:51 Get A/D filter: -9.255963e+061 result=40 14:21:51 Get A/D value=-858993460 result=40 14:21:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:51 Aux= 14:21:51 Message to Camera, serial 224119 queued 14:22:00 Received message from Master: op=Shutter serial=224129 14:22:00 Shutter LASER close 14:22:00 Received message from Master: op=PointingHead serial=224133 14:22:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:22:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:22:01 Point started: ret=0 14:22:01 point_skyscan result=0 14:22:01 Check angles 14:22:01 SkyScan query 14:22:02 SkyScan query done: ret=0 az=90.105<-6007 ze=157.44<-1504 Statuses=0009 0009 14:22:02 Msec=0 True Az=90.105 Ze=157.44 Az status=0009 Ze status=0009 14:22:02 Check angles 14:22:02 SkyScan query 14:22:03 SkyScan query done: ret=0 az=72.6<-4840 ze=136.47<-2902 Statuses=0009 0009 14:22:03 Msec=750 True Az=72.6 Ze=136.47 Az status=0009 Ze status=0009 14:22:03 Check angles 14:22:03 SkyScan query 14:22:03 SkyScan query done: ret=0 az=55.29<-3686 ze=115.56<-4296 Statuses=0009 0009 14:22:03 Msec=1500 True Az=55.29 Ze=115.56 Az status=0009 Ze status=0009 14:22:04 Check angles 14:22:04 SkyScan query 14:22:04 SkyScan query done: ret=0 az=40.965<-2731 ze=94.575<-5695 Statuses=0009 0009 14:22:04 Msec=2250 True Az=40.965 Ze=94.575 Az status=0009 Ze status=0009 14:22:04 Check angles 14:22:04 SkyScan query 14:22:05 SkyScan query done: ret=0 az=40.98<-2732 ze=73.635<-7091 Statuses=0008 0009 14:22:05 Msec=3000 True Az=40.98 Ze=73.635 Az status=0008 Ze status=0009 14:22:05 Check angles 14:22:05 SkyScan query 14:22:06 SkyScan query done: ret=0 az=40.98<-2732 ze=52.98<-8468 Statuses=0008 0009 14:22:06 Msec=3750 True Az=40.98 Ze=52.98 Az status=0008 Ze status=0009 14:22:06 Check angles 14:22:06 SkyScan query 14:22:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:22:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:22:06 Message to Master queued w/err=0: serial=224133 error=0 14:22:11 Received message from Master: op=Filter serial=224134 14:22:11 Color wheel filter change from 0 to 0 14:22:11 FLIGetFilterPos err=0 currentPosition=0 14:22:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:11 Filter is already there-color wheel unchanged 14:22:12 Received message from Master: op=Shutter serial=224135 14:22:12 Shutter LASER close 14:22:12 Received message from Camera: op=State serial=224137 14:22:12 GetSingleValue result=40 Value=cccccccc 14:22:12 SkyScan query 14:22:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:22:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:12 Parameters OK 14:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:12 Set A/D data flow result=40 14:22:12 Set A/D channel type result=40 14:22:12 Set A/D encoding result=40 14:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:12 Set channel filter=0.000000e+000 result=40 14:22:12 Config A/D Result=40 14:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:12 Get A/D filter: -9.255963e+061 result=40 14:22:12 Get A/D value=-858993460 result=40 14:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:12 Parameters OK 14:22:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:12 Set A/D data flow result=40 14:22:12 Set A/D channel type result=40 14:22:12 Set A/D encoding result=40 14:22:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:12 Set channel filter=0.000000e+000 result=40 14:22:12 Config A/D Result=40 14:22:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:12 Get A/D filter: -9.255963e+061 result=40 14:22:12 Get A/D value=-858993460 result=40 14:22:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:12 Aux= 14:22:12 Message to Camera, serial 224137 queued 14:22:49 Received message from Master: op=PointingHead serial=224150 14:22:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:22:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:22:49 Point started: ret=0 14:22:49 point_skyscan result=0 14:22:50 Check angles 14:22:50 SkyScan query 14:22:51 SkyScan query done: ret=0 az=63.96<-4264 ze=66.54<-7564 Statuses=0009 0008 14:22:51 Msec=0 True Az=63.96 Ze=66.54 Az status=0009 Ze status=0008 14:22:51 Check angles 14:22:51 SkyScan query 14:22:52 SkyScan query done: ret=0 az=81.645<-5443 ze=66.51<-7566 Statuses=0009 0008 14:22:52 Msec=750 True Az=81.645 Ze=66.51 Az status=0009 Ze status=0008 14:22:52 Check angles 14:22:52 SkyScan query 14:22:52 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 14:22:52 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 14:22:52 Check angles 14:22:52 SkyScan query 14:22:53 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 14:22:53 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 14:22:53 Check angles 14:22:53 SkyScan query 14:22:54 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 14:22:54 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 14:22:54 Check angles 14:22:54 SkyScan query 14:22:55 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 14:22:55 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 14:22:55 Check angles 14:22:55 SkyScan query 14:22:55 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:22:55 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:22:55 Message to Master queued w/err=0: serial=224150 error=0 14:23:00 Received message from Master: op=Filter serial=224151 14:23:00 Color wheel filter change from 0 to 0 14:23:00 FLIGetFilterPos err=0 currentPosition=0 14:23:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:00 Filter is already there-color wheel unchanged 14:23:00 Received message from Master: op=Shutter serial=224152 14:23:00 Shutter LASER close 14:23:01 Received message from Camera: op=State serial=224154 14:23:01 GetSingleValue result=40 Value=cccccccc 14:23:01 SkyScan query 14:23:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:23:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:01 Parameters OK 14:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:01 Set A/D data flow result=40 14:23:01 Set A/D channel type result=40 14:23:01 Set A/D encoding result=40 14:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:01 Set channel filter=0.000000e+000 result=40 14:23:01 Config A/D Result=40 14:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:01 Get A/D filter: -9.255963e+061 result=40 14:23:01 Get A/D value=-858993460 result=40 14:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:01 Parameters OK 14:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:01 Set A/D data flow result=40 14:23:01 Set A/D channel type result=40 14:23:01 Set A/D encoding result=40 14:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:01 Set channel filter=0.000000e+000 result=40 14:23:01 Config A/D Result=40 14:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:01 Get A/D filter: -9.255963e+061 result=40 14:23:01 Get A/D value=-858993460 result=40 14:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:01 Aux= 14:23:01 Message to Camera, serial 224154 queued 14:23:38 Received message from Master: op=PointingHead serial=224167 14:23:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:23:38 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:23:38 Point started: ret=0 14:23:38 point_skyscan result=0 14:23:39 Check angles 14:23:39 SkyScan query 14:23:40 SkyScan query done: ret=0 az=135.09<-9006 ze=36.75<-9550 Statuses=0009 0009 14:23:40 Msec=0 True Az=135.09 Ze=36.75 Az status=0009 Ze status=0009 14:23:40 Check angles 14:23:40 SkyScan query 14:23:40 SkyScan query done: ret=0 az=117.585<-7839 ze=15.78<-10948 Statuses=0009 0009 14:23:40 Msec=750 True Az=117.585 Ze=15.78 Az status=0009 Ze status=0009 14:23:41 Check angles 14:23:41 SkyScan query 14:23:41 SkyScan query done: ret=0 az=100.215<-6681 ze=-5.16<-12344 Statuses=0009 0009 14:23:41 Msec=1500 True Az=100.215 Ze=-5.16 Az status=0009 Ze status=0009 14:23:41 Check angles 14:23:41 SkyScan query 14:23:42 SkyScan query done: ret=0 az=82.665<-5511 ze=-26.115<-13741 Statuses=0009 0009 14:23:42 Msec=2250 True Az=82.665 Ze=-26.115 Az status=0009 Ze status=0009 14:23:42 Check angles 14:23:42 SkyScan query 14:23:43 SkyScan query done: ret=0 az=65.175<-4345 ze=-38.565<-14571 Statuses=0009 0008 14:23:43 Msec=3000 True Az=65.175 Ze=-38.565 Az status=0009 Ze status=0008 14:23:43 Check angles 14:23:43 SkyScan query 14:23:43 SkyScan query done: ret=0 az=47.715<-3181 ze=-38.535<-14569 Statuses=0009 0008 14:23:43 Msec=3750 True Az=47.715 Ze=-38.535 Az status=0009 Ze status=0008 14:23:44 Check angles 14:23:44 SkyScan query 14:23:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:23:44 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:23:44 Message to Master queued w/err=0: serial=224167 error=0 14:23:49 Received message from Master: op=Filter serial=224168 14:23:49 Color wheel filter change from 0 to 0 14:23:49 FLIGetFilterPos err=0 currentPosition=0 14:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:49 Filter is already there-color wheel unchanged 14:23:49 Received message from Master: op=Shutter serial=224169 14:23:49 Shutter LASER close 14:23:49 Received message from Camera: op=State serial=224171 14:23:49 GetSingleValue result=40 Value=cccccccc 14:23:49 SkyScan query 14:23:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:50 Parameters OK 14:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:50 Set A/D data flow result=40 14:23:50 Set A/D channel type result=40 14:23:50 Set A/D encoding result=40 14:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:50 Set channel filter=0.000000e+000 result=40 14:23:50 Config A/D Result=40 14:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:50 Get A/D filter: -9.255963e+061 result=40 14:23:50 Get A/D value=-858993460 result=40 14:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:50 Parameters OK 14:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:50 Set A/D data flow result=40 14:23:50 Set A/D channel type result=40 14:23:50 Set A/D encoding result=40 14:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:50 Set channel filter=0.000000e+000 result=40 14:23:50 Config A/D Result=40 14:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:50 Get A/D filter: -9.255963e+061 result=40 14:23:50 Get A/D value=-858993460 result=40 14:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:50 Aux= 14:23:50 Message to Camera, serial 224171 queued 14:24:27 Received message from Master: op=PointingHead serial=224184 14:24:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:24:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:24:27 Point started: ret=0 14:24:27 point_skyscan result=0 14:24:28 Check angles 14:24:28 SkyScan query 14:24:28 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.085<-16539 Statuses=0009 0009 14:24:28 Msec=0 True Az=63.915 Ze=-68.085 Az status=0009 Ze status=0009 14:24:29 Check angles 14:24:29 SkyScan query 14:24:29 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.505<-17967 Statuses=0009 0009 14:24:29 Msec=750 True Az=81.645 Ze=-89.505 Az status=0009 Ze status=0009 14:24:29 Check angles 14:24:29 SkyScan query 14:24:30 SkyScan query done: ret=0 az=99.63<-6642 ze=-110.88<-19392 Statuses=0009 0009 14:24:30 Msec=1500 True Az=99.63 Ze=-110.88 Az status=0009 Ze status=0009 14:24:30 Check angles 14:24:30 SkyScan query 14:24:31 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.805<-20787 Statuses=0009 0009 14:24:31 Msec=2250 True Az=117.045 Ze=-131.805 Az status=0009 Ze status=0009 14:24:31 Check angles 14:24:31 SkyScan query 14:24:31 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.525<-21435 Statuses=0009 0008 14:24:31 Msec=3000 True Az=131.025 Ze=-141.525 Az status=0009 Ze status=0008 14:24:32 Check angles 14:24:32 SkyScan query 14:24:32 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:24:32 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:24:32 Message to Master queued w/err=0: serial=224184 error=0 14:24:37 Received message from Master: op=Filter serial=224185 14:24:37 Color wheel filter change from 0 to 0 14:24:37 FLIGetFilterPos err=0 currentPosition=0 14:24:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:37 Filter is already there-color wheel unchanged 14:24:37 Received message from Master: op=Shutter serial=224186 14:24:37 Shutter LASER close 14:24:37 Received message from Camera: op=State serial=224188 14:24:37 GetSingleValue result=40 Value=cccccccc 14:24:37 SkyScan query 14:24:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:24:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:38 Parameters OK 14:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:38 Set A/D data flow result=40 14:24:38 Set A/D channel type result=40 14:24:38 Set A/D encoding result=40 14:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:38 Set channel filter=0.000000e+000 result=40 14:24:38 Config A/D Result=40 14:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:38 Get A/D filter: -9.255963e+061 result=40 14:24:38 Get A/D value=-858993460 result=40 14:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:38 Parameters OK 14:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:38 Set A/D data flow result=40 14:24:38 Set A/D channel type result=40 14:24:38 Set A/D encoding result=40 14:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:38 Set channel filter=0.000000e+000 result=40 14:24:38 Config A/D Result=40 14:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:38 Get A/D filter: -9.255963e+061 result=40 14:24:38 Get A/D value=-858993460 result=40 14:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:38 Aux= 14:24:38 Message to Camera, serial 224188 queued 14:25:14 Received message from Master: op=PointingHead serial=224200 14:25:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:25:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:25:14 Point started: ret=0 14:25:14 point_skyscan result=0 14:25:15 Check angles 14:25:15 SkyScan query 14:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0009 0009 14:25:16 Msec=0 True Az=112.995 Ze=-171.45 Az status=0009 Ze status=0009 14:25:16 Check angles 14:25:16 SkyScan query 14:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:25:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:25:16 Message to Master queued w/err=0: serial=224200 error=0 14:25:21 Received message from Master: op=Filter serial=224201 14:25:21 Color wheel filter change from 0 to 0 14:25:21 FLIGetFilterPos err=0 currentPosition=0 14:25:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:21 Filter is already there-color wheel unchanged 14:25:22 Received message from Master: op=Shutter serial=224202 14:25:22 Shutter LASER open 14:25:22 Received message from Camera: op=State serial=224204 14:25:22 GetSingleValue result=40 Value=cccccccc 14:25:22 SkyScan query 14:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:25:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:22 Parameters OK 14:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:22 Set A/D data flow result=40 14:25:22 Set A/D channel type result=40 14:25:22 Set A/D encoding result=40 14:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:22 Set channel filter=0.000000e+000 result=40 14:25:22 Config A/D Result=40 14:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:22 Get A/D filter: -9.255963e+061 result=40 14:25:22 Get A/D value=-858993460 result=40 14:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:22 Parameters OK 14:25:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:22 Set A/D data flow result=40 14:25:22 Set A/D channel type result=40 14:25:22 Set A/D encoding result=40 14:25:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:22 Set channel filter=0.000000e+000 result=40 14:25:22 Config A/D Result=40 14:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:22 Get A/D filter: -9.255963e+061 result=40 14:25:22 Get A/D value=-858993460 result=40 14:25:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:22 Aux= 14:25:22 Message to Camera, serial 224204 queued 14:25:31 Received message from Master: op=Shutter serial=224214 14:25:31 Shutter LASER close 14:25:31 Received message from Master: op=PointingHead serial=224218 14:25:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:25:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:25:32 Point started: ret=0 14:25:32 point_skyscan result=0 14:25:32 Check angles 14:25:32 SkyScan query 14:25:33 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.8<-21520 Statuses=0009 0009 14:25:33 Msec=0 True Az=136.35 Ze=-142.8 Az status=0009 Ze status=0009 14:25:33 Check angles 14:25:33 SkyScan query 14:25:34 SkyScan query done: ret=0 az=154.155<-10277 ze=-121.455<-20097 Statuses=0009 0009 14:25:34 Msec=750 True Az=154.155 Ze=-121.455 Az status=0009 Ze status=0009 14:25:34 Check angles 14:25:34 SkyScan query 14:25:35 SkyScan query done: ret=0 az=171.615<-11441 ze=-100.425<-18695 Statuses=0009 0009 14:25:35 Msec=1500 True Az=171.615 Ze=-100.425 Az status=0009 Ze status=0009 14:25:35 Check angles 14:25:35 SkyScan query 14:25:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.485<-17299 Statuses=0008 0009 14:25:35 Msec=2250 True Az=176.01 Ze=-79.485 Az status=0008 Ze status=0009 14:25:35 Check angles 14:25:35 SkyScan query 14:25:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.53<-15902 Statuses=0008 0009 14:25:36 Msec=3000 True Az=176.01 Ze=-58.53 Az status=0008 Ze status=0009 14:25:36 Check angles 14:25:36 SkyScan query 14:25:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 14:25:37 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 14:25:37 Message to Master queued w/err=0: serial=224218 error=0 14:25:42 Received message from Master: op=Filter serial=224219 14:25:42 Color wheel filter change from 0 to 0 14:25:42 FLIGetFilterPos err=0 currentPosition=0 14:25:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:42 Filter is already there-color wheel unchanged 14:25:42 Received message from Master: op=Shutter serial=224220 14:25:42 Shutter LASER close 14:25:42 Received message from Camera: op=State serial=224222 14:25:42 GetSingleValue result=40 Value=cccccccc 14:25:42 SkyScan query 14:25:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:25:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:43 Parameters OK 14:25:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:43 Set A/D data flow result=40 [UTC 2018-12-17 14:25:43] 14:25:43 Set A/D channel type result=40 14:25:43 Set A/D encoding result=40 14:25:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:43 Set channel filter=0.000000e+000 result=40 14:25:43 Config A/D Result=40 14:25:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:43 Get A/D filter: -9.255963e+061 result=40 14:25:43 Get A/D value=-858993460 result=40 14:25:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:43 Parameters OK 14:25:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:43 Set A/D data flow result=40 14:25:43 Set A/D channel type result=40 14:25:43 Set A/D encoding result=40 14:25:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:43 Set channel filter=0.000000e+000 result=40 14:25:43 Config A/D Result=40 14:25:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:43 Get A/D filter: -9.255963e+061 result=40 14:25:43 Get A/D value=-858993460 result=40 14:25:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:43 Aux= 14:25:43 Message to Camera, serial 224222 queued 14:26:20 Received message from Master: op=PointingHead serial=224235 14:26:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:26:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:26:20 Point started: ret=0 14:26:20 point_skyscan result=0 14:26:21 Check angles 14:26:21 SkyScan query 14:26:21 SkyScan query done: ret=0 az=152.88<-10192 ze=-21.645<-13443 Statuses=0009 0009 14:26:21 Msec=0 True Az=152.88 Ze=-21.645 Az status=0009 Ze status=0009 14:26:21 Check angles 14:26:21 SkyScan query 14:26:22 SkyScan query done: ret=0 az=135.405<-9027 ze=-0.645<-12043 Statuses=0009 0009 14:26:22 Msec=750 True Az=135.405 Ze=-0.645 Az status=0009 Ze status=0009 14:26:22 Check angles 14:26:22 SkyScan query 14:26:23 SkyScan query done: ret=0 az=117.81<-7854 ze=20.28<-10648 Statuses=0009 0009 14:26:23 Msec=1500 True Az=117.81 Ze=20.28 Az status=0009 Ze status=0009 14:26:23 Check angles 14:26:23 SkyScan query 14:26:24 SkyScan query done: ret=0 az=100.155<-6677 ze=41.715<-9219 Statuses=0009 0009 14:26:24 Msec=2250 True Az=100.155 Ze=41.715 Az status=0009 Ze status=0009 14:26:24 Check angles 14:26:24 SkyScan query 14:26:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 14:26:24 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 14:26:24 Check angles 14:26:24 SkyScan query 14:26:25 SkyScan query done: ret=0 az=85.98<-5732 ze=51.525<-8565 Statuses=0008 0008 14:26:25 Msec=3750 True Az=85.98 Ze=51.525 Az status=0008 Ze status=0008 14:26:25 Message to Master queued w/err=0: serial=224235 error=0 14:26:30 Received message from Master: op=Filter serial=224236 14:26:30 Color wheel filter change from 0 to 0 14:26:30 FLIGetFilterPos err=0 currentPosition=0 14:26:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:30 Filter is already there-color wheel unchanged 14:26:30 Received message from Master: op=Shutter serial=224237 14:26:30 Shutter LASER close 14:26:30 Received message from Camera: op=State serial=224239 14:26:30 GetSingleValue result=40 Value=cccccccc 14:26:30 SkyScan query 14:26:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:26:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:31 Parameters OK 14:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:31 Set A/D data flow result=40 14:26:31 Set A/D channel type result=40 14:26:31 Set A/D encoding result=40 14:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:31 Set channel filter=0.000000e+000 result=40 14:26:31 Config A/D Result=40 14:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:31 Get A/D filter: -9.255963e+061 result=40 14:26:31 Get A/D value=-858993460 result=40 14:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:31 Parameters OK 14:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:31 Set A/D data flow result=40 14:26:31 Set A/D channel type result=40 14:26:31 Set A/D encoding result=40 14:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:31 Set channel filter=0.000000e+000 result=40 14:26:31 Config A/D Result=40 14:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:31 Get A/D filter: -9.255963e+061 result=40 14:26:31 Get A/D value=-858993460 result=40 14:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:31 Aux= 14:26:31 Message to Camera, serial 224239 queued 14:27:08 Received message from Master: op=PointingHead serial=224252 14:27:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:27:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:27:08 Point started: ret=0 14:27:08 point_skyscan result=0 14:27:09 Check angles 14:27:09 SkyScan query 14:27:09 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 14:27:09 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 14:27:10 Check angles 14:27:10 SkyScan query 14:27:10 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 14:27:10 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 14:27:10 Check angles 14:27:10 SkyScan query 14:27:11 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 14:27:11 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 14:27:11 Check angles 14:27:11 SkyScan query 14:27:12 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 14:27:12 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 14:27:12 Check angles 14:27:12 SkyScan query 14:27:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:27:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:27:13 Check angles 14:27:13 SkyScan query 14:27:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:27:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:27:13 Message to Master queued w/err=0: serial=224252 error=0 14:27:18 Received message from Master: op=Filter serial=224253 14:27:18 Color wheel filter change from 0 to 0 14:27:18 FLIGetFilterPos err=0 currentPosition=0 14:27:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:18 Filter is already there-color wheel unchanged 14:27:18 Received message from Master: op=Shutter serial=224254 14:27:18 Shutter LASER close 14:27:18 Received message from Camera: op=State serial=224256 14:27:18 GetSingleValue result=40 Value=cccccccc 14:27:18 SkyScan query 14:27:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:27:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:19 Parameters OK 14:27:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:19 Set A/D data flow result=40 14:27:19 Set A/D channel type result=40 14:27:19 Set A/D encoding result=40 14:27:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:19 Set channel filter=0.000000e+000 result=40 14:27:19 Config A/D Result=40 14:27:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:19 Get A/D filter: -9.255963e+061 result=40 14:27:19 Get A/D value=-858993460 result=40 14:27:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:19 Parameters OK 14:27:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:19 Set A/D data flow result=40 14:27:19 Set A/D channel type result=40 14:27:19 Set A/D encoding result=40 14:27:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:19 Set channel filter=0.000000e+000 result=40 14:27:19 Config A/D Result=40 14:27:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:19 Get A/D filter: -9.255963e+061 result=40 14:27:19 Get A/D value=-858993460 result=40 14:27:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:19 Aux= 14:27:19 Message to Camera, serial 224256 queued 14:27:56 Received message from Master: op=PointingHead serial=224269 14:27:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:27:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:27:56 Point started: ret=0 14:27:56 point_skyscan result=0 14:27:57 Check angles 14:27:57 SkyScan query 14:27:57 SkyScan query done: ret=0 az=153.195<-10213 ze=8.895<-11407 Statuses=0009 0009 14:27:57 Msec=0 True Az=153.195 Ze=8.895 Az status=0009 Ze status=0009 14:27:58 Check angles 14:27:58 SkyScan query 14:27:58 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.45<-12830 Statuses=0009 0009 14:27:58 Msec=750 True Az=135.39 Ze=-12.45 Az status=0009 Ze status=0009 14:27:58 Check angles 14:27:58 SkyScan query 14:27:59 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.42<-14228 Statuses=0009 0009 14:27:59 Msec=1500 True Az=117.78 Ze=-33.42 Az status=0009 Ze status=0009 14:27:59 Check angles 14:27:59 SkyScan query 14:28:00 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 14:28:00 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 14:28:00 Check angles 14:28:00 SkyScan query 14:28:00 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:28:00 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:28:01 Check angles 14:28:01 SkyScan query 14:28:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:28:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:28:01 Message to Master queued w/err=0: serial=224269 error=0 14:28:06 Received message from Master: op=Filter serial=224270 14:28:06 Color wheel filter change from 0 to 0 14:28:06 FLIGetFilterPos err=0 currentPosition=0 14:28:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:06 Filter is already there-color wheel unchanged 14:28:06 Received message from Master: op=Shutter serial=224271 14:28:06 Shutter LASER close 14:28:06 Received message from Camera: op=State serial=224273 14:28:06 GetSingleValue result=40 Value=cccccccc 14:28:06 SkyScan query 14:28:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:28:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:07 Parameters OK 14:28:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:07 Set A/D data flow result=40 14:28:07 Set A/D channel type result=40 14:28:07 Set A/D encoding result=40 14:28:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:07 Set channel filter=0.000000e+000 result=40 14:28:07 Config A/D Result=40 14:28:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:07 Get A/D filter: -9.255963e+061 result=40 14:28:07 Get A/D value=-858993460 result=40 14:28:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:07 Parameters OK 14:28:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:07 Set A/D data flow result=40 14:28:07 Set A/D channel type result=40 14:28:07 Set A/D encoding result=40 14:28:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:07 Set channel filter=0.000000e+000 result=40 14:28:07 Config A/D Result=40 14:28:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:07 Get A/D filter: -9.255963e+061 result=40 14:28:07 Get A/D value=-858993460 result=40 14:28:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:07 Aux= 14:28:07 Message to Camera, serial 224273 queued 14:28:44 Received message from Master: op=PointingHead serial=224286 14:28:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:28:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:28:44 Point started: ret=0 14:28:44 point_skyscan result=0 14:28:45 Check angles 14:28:45 SkyScan query 14:28:46 SkyScan query done: ret=0 az=109.485<-7299 ze=-81.87<-17458 Statuses=0009 0009 14:28:46 Msec=0 True Az=109.485 Ze=-81.87 Az status=0009 Ze status=0009 14:28:46 Check angles 14:28:46 SkyScan query 14:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.23<-18882 Statuses=0008 0009 14:28:46 Msec=750 True Az=112.995 Ze=-103.23 Az status=0008 Ze status=0009 14:28:46 Check angles 14:28:46 SkyScan query 14:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.155<-20277 Statuses=0008 0009 14:28:47 Msec=1500 True Az=112.995 Ze=-124.155 Az status=0008 Ze status=0009 14:28:47 Check angles 14:28:47 SkyScan query 14:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 14:28:48 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 14:28:48 Check angles 14:28:48 SkyScan query 14:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.035<-23069 Statuses=0008 0009 14:28:49 Msec=3000 True Az=112.995 Ze=-166.035 Az status=0008 Ze status=0009 14:28:49 Check angles 14:28:49 SkyScan query 14:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:28:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:28:49 Message to Master queued w/err=0: serial=224286 error=0 14:28:54 Received message from Master: op=Filter serial=224287 14:28:54 Color wheel filter change from 0 to 0 14:28:54 FLIGetFilterPos err=0 currentPosition=0 14:28:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:54 Filter is already there-color wheel unchanged 14:28:54 Received message from Master: op=Shutter serial=224288 14:28:54 Shutter LASER open 14:28:55 Received message from Camera: op=State serial=224290 14:28:55 GetSingleValue result=40 Value=cccccccc 14:28:55 SkyScan query 14:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:28:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:55 Parameters OK 14:28:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:55 Set A/D data flow result=40 14:28:55 Set A/D channel type result=40 14:28:55 Set A/D encoding result=40 14:28:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:55 Set channel filter=0.000000e+000 result=40 14:28:55 Config A/D Result=40 14:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:55 Get A/D filter: -9.255963e+061 result=40 14:28:55 Get A/D value=-858993460 result=40 14:28:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:55 Parameters OK 14:28:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:55 Set A/D data flow result=40 14:28:55 Set A/D channel type result=40 14:28:55 Set A/D encoding result=40 14:28:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:55 Set channel filter=0.000000e+000 result=40 14:28:55 Config A/D Result=40 14:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:55 Get A/D filter: -9.255963e+061 result=40 14:28:55 Get A/D value=-858993460 result=40 14:28:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:55 Aux= 14:28:55 Message to Camera, serial 224290 queued 14:29:04 Received message from Master: op=Shutter serial=224300 14:29:04 Shutter LASER close 14:29:04 Received message from Master: op=PointingHead serial=224304 14:29:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:29:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:29:04 Point started: ret=0 14:29:04 point_skyscan result=0 14:29:05 Check angles 14:29:05 SkyScan query 14:29:06 SkyScan query done: ret=0 az=89.88<-5992 ze=157.305<-1513 Statuses=0009 0009 14:29:06 Msec=0 True Az=89.88 Ze=157.305 Az status=0009 Ze status=0009 14:29:06 Check angles 14:29:06 SkyScan query 14:29:07 SkyScan query done: ret=0 az=72.525<-4835 ze=136.335<-2911 Statuses=0009 0009 14:29:07 Msec=750 True Az=72.525 Ze=136.335 Az status=0009 Ze status=0009 14:29:07 Check angles 14:29:07 SkyScan query 14:29:07 SkyScan query done: ret=0 az=54.795<-3653 ze=114.945<-4337 Statuses=0009 0009 14:29:07 Msec=1500 True Az=54.795 Ze=114.945 Az status=0009 Ze status=0009 14:29:07 Check angles 14:29:07 SkyScan query 14:29:08 SkyScan query done: ret=0 az=40.995<-2733 ze=93.99<-5734 Statuses=0009 0009 14:29:08 Msec=2250 True Az=40.995 Ze=93.99 Az status=0009 Ze status=0009 14:29:08 Check angles 14:29:08 SkyScan query 14:29:09 SkyScan query done: ret=0 az=40.98<-2732 ze=73.005<-7133 Statuses=0008 0009 14:29:09 Msec=3000 True Az=40.98 Ze=73.005 Az status=0008 Ze status=0009 14:29:09 Check angles 14:29:09 SkyScan query 14:29:10 SkyScan query done: ret=0 az=40.98<-2732 ze=52.62<-8492 Statuses=0008 0009 14:29:10 Msec=3750 True Az=40.98 Ze=52.62 Az status=0008 Ze status=0009 14:29:10 Check angles 14:29:10 SkyScan query 14:29:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:29:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:29:10 Message to Master queued w/err=0: serial=224304 error=0 14:29:15 Received message from Master: op=Filter serial=224305 14:29:15 Color wheel filter change from 0 to 0 14:29:15 FLIGetFilterPos err=0 currentPosition=0 14:29:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:15 Filter is already there-color wheel unchanged 14:29:16 Received message from Master: op=Shutter serial=224306 14:29:16 Shutter LASER close 14:29:16 Received message from Camera: op=State serial=224308 14:29:16 GetSingleValue result=40 Value=cccccccc 14:29:16 SkyScan query 14:29:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:29:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:16 Parameters OK 14:29:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:16 Set A/D data flow result=40 14:29:16 Set A/D channel type result=40 14:29:16 Set A/D encoding result=40 14:29:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:16 Set channel filter=0.000000e+000 result=40 14:29:16 Config A/D Result=40 14:29:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:16 Get A/D filter: -9.255963e+061 result=40 14:29:16 Get A/D value=-858993460 result=40 14:29:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:16 Parameters OK 14:29:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:16 Set A/D data flow result=40 14:29:16 Set A/D channel type result=40 14:29:16 Set A/D encoding result=40 14:29:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:16 Set channel filter=0.000000e+000 result=40 14:29:16 Config A/D Result=40 14:29:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:16 Get A/D filter: -9.255963e+061 result=40 14:29:16 Get A/D value=-858993460 result=40 14:29:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:16 Aux= 14:29:16 Message to Camera, serial 224308 queued 14:29:53 Received message from Master: op=PointingHead serial=224321 14:29:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:29:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:29:53 Point started: ret=0 14:29:53 point_skyscan result=0 14:29:54 Check angles 14:29:54 SkyScan query 14:29:55 SkyScan query done: ret=0 az=64.035<-4269 ze=66.555<-7563 Statuses=0009 0008 14:29:55 Msec=0 True Az=64.035 Ze=66.555 Az status=0009 Ze status=0008 14:29:55 Check angles 14:29:55 SkyScan query 14:29:56 SkyScan query done: ret=0 az=81.315<-5421 ze=66.51<-7566 Statuses=0009 0008 14:29:56 Msec=750 True Az=81.315 Ze=66.51 Az status=0009 Ze status=0008 14:29:56 Check angles 14:29:56 SkyScan query 14:29:56 SkyScan query done: ret=0 az=98.94<-6596 ze=66.495<-7567 Statuses=0009 0008 14:29:56 Msec=1500 True Az=98.94 Ze=66.495 Az status=0009 Ze status=0008 14:29:56 Check angles 14:29:56 SkyScan query 14:29:57 SkyScan query done: ret=0 az=116.46<-7764 ze=66.495<-7567 Statuses=0009 0008 14:29:57 Msec=2250 True Az=116.46 Ze=66.495 Az status=0009 Ze status=0008 14:29:57 Check angles 14:29:57 SkyScan query 14:29:58 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 14:29:58 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 14:29:58 Check angles 14:29:58 SkyScan query 14:29:59 SkyScan query done: ret=0 az=151.245<-10083 ze=66.495<-7567 Statuses=0009 0008 14:29:59 Msec=3750 True Az=151.245 Ze=66.495 Az status=0009 Ze status=0008 14:29:59 Check angles 14:29:59 SkyScan query 14:29:59 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:29:59 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:29:59 Message to Master queued w/err=0: serial=224321 error=0 14:30:04 Received message from Master: op=Filter serial=224322 14:30:04 Color wheel filter change from 0 to 0 14:30:04 FLIGetFilterPos err=0 currentPosition=0 14:30:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:04 Filter is already there-color wheel unchanged 14:30:04 Received message from Master: op=Shutter serial=224323 14:30:04 Shutter LASER close 14:30:04 Received message from Camera: op=State serial=224325 14:30:04 GetSingleValue result=40 Value=cccccccc 14:30:04 SkyScan query 14:30:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:30:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:05 Parameters OK 14:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:05 Set A/D data flow result=40 14:30:05 Set A/D channel type result=40 14:30:05 Set A/D encoding result=40 14:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:05 Set channel filter=0.000000e+000 result=40 14:30:05 Config A/D Result=40 14:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:05 Get A/D filter: -9.255963e+061 result=40 14:30:05 Get A/D value=-858993460 result=40 14:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:05 Parameters OK 14:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:05 Set A/D data flow result=40 14:30:05 Set A/D channel type result=40 14:30:05 Set A/D encoding result=40 14:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:05 Set channel filter=0.000000e+000 result=40 14:30:05 Config A/D Result=40 14:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:05 Get A/D filter: -9.255963e+061 result=40 14:30:05 Get A/D value=-858993460 result=40 14:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:05 Aux= 14:30:05 Message to Camera, serial 224325 queued 14:30:42 Received message from Master: op=PointingHead serial=224338 14:30:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:30:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:30:42 Point started: ret=0 14:30:42 point_skyscan result=0 14:30:43 Check angles 14:30:43 SkyScan query 14:30:44 SkyScan query done: ret=0 az=134.58<-8972 ze=36.285<-9581 Statuses=0009 0009 14:30:44 Msec=0 True Az=134.58 Ze=36.285 Az status=0009 Ze status=0009 14:30:44 Check angles 14:30:44 SkyScan query 14:30:44 SkyScan query done: ret=0 az=116.805<-7787 ze=14.865<-11009 Statuses=0009 0009 14:30:44 Msec=750 True Az=116.805 Ze=14.865 Az status=0009 Ze status=0009 14:30:45 Check angles 14:30:45 SkyScan query 14:30:45 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.12<-12408 Statuses=0009 0009 14:30:45 Msec=1500 True Az=99.39 Ze=-6.12 Az status=0009 Ze status=0009 14:30:45 Check angles 14:30:45 SkyScan query 14:30:46 SkyScan query done: ret=0 az=81.84<-5456 ze=-27.075<-13805 Statuses=0009 0009 14:30:46 Msec=2250 True Az=81.84 Ze=-27.075 Az status=0009 Ze status=0009 14:30:46 Check angles 14:30:46 SkyScan query 14:30:47 SkyScan query done: ret=0 az=64.02<-4268 ze=-38.58<-14572 Statuses=0009 0008 14:30:47 Msec=3000 True Az=64.02 Ze=-38.58 Az status=0009 Ze status=0008 14:30:47 Check angles 14:30:47 SkyScan query 14:30:47 SkyScan query done: ret=0 az=46.635<-3109 ze=-38.52<-14568 Statuses=0009 0008 14:30:47 Msec=3750 True Az=46.635 Ze=-38.52 Az status=0009 Ze status=0008 14:30:48 Check angles 14:30:48 SkyScan query 14:30:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:30:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:30:48 Message to Master queued w/err=0: serial=224338 error=0 14:30:53 Received message from Master: op=Filter serial=224339 14:30:53 Color wheel filter change from 0 to 0 14:30:53 FLIGetFilterPos err=0 currentPosition=0 14:30:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:53 Filter is already there-color wheel unchanged 14:30:53 Received message from Master: op=Shutter serial=224340 14:30:53 Shutter LASER close 14:30:53 Received message from Camera: op=State serial=224342 14:30:53 GetSingleValue result=40 Value=cccccccc 14:30:53 SkyScan query 14:30:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:30:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:54 Parameters OK 14:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:54 Set A/D data flow result=40 14:30:54 Set A/D channel type result=40 14:30:54 Set A/D encoding result=40 14:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:54 Set channel filter=0.000000e+000 result=40 14:30:54 Config A/D Result=40 14:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:54 Get A/D filter: -9.255963e+061 result=40 14:30:54 Get A/D value=-858993460 result=40 14:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:54 Parameters OK 14:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:54 Set A/D data flow result=40 14:30:54 Set A/D channel type result=40 14:30:54 Set A/D encoding result=40 14:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:54 Set channel filter=0.000000e+000 result=40 14:30:54 Config A/D Result=40 14:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:54 Get A/D filter: -9.255963e+061 result=40 14:30:54 Get A/D value=-858993460 result=40 14:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:54 Aux= 14:30:54 Message to Camera, serial 224342 queued 14:31:31 Received message from Master: op=PointingHead serial=224355 14:31:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:31:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:31:31 Point started: ret=0 14:31:31 point_skyscan result=0 14:31:32 Check angles 14:31:32 SkyScan query 14:31:33 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.175<-16545 Statuses=0009 0009 14:31:33 Msec=0 True Az=63.975 Ze=-68.175 Az status=0009 Ze status=0009 14:31:33 Check angles 14:31:33 SkyScan query 14:31:33 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.16<-17944 Statuses=0009 0009 14:31:33 Msec=750 True Az=81.36 Ze=-89.16 Az status=0009 Ze status=0009 14:31:33 Check angles 14:31:33 SkyScan query 14:31:34 SkyScan query done: ret=0 az=98.88<-6592 ze=-110.115<-19341 Statuses=0009 0009 14:31:34 Msec=1500 True Az=98.88 Ze=-110.115 Az status=0009 Ze status=0009 14:31:34 Check angles 14:31:34 SkyScan query 14:31:35 SkyScan query done: ret=0 az=116.31<-7754 ze=-131.07<-20738 Statuses=0009 0009 14:31:35 Msec=2250 True Az=116.31 Ze=-131.07 Az status=0009 Ze status=0009 14:31:35 Check angles 14:31:35 SkyScan query 14:31:36 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 14:31:36 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 14:31:36 Check angles 14:31:36 SkyScan query 14:31:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:31:36 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:31:36 Message to Master queued w/err=0: serial=224355 error=0 14:31:41 Received message from Master: op=Filter serial=224356 14:31:41 Color wheel filter change from 0 to 0 14:31:41 FLIGetFilterPos err=0 currentPosition=0 14:31:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:41 Filter is already there-color wheel unchanged 14:31:41 Received message from Master: op=Shutter serial=224357 14:31:41 Shutter LASER close 14:31:41 Received message from Camera: op=State serial=224359 14:31:41 GetSingleValue result=40 Value=cccccccc 14:31:41 SkyScan query 14:31:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:31:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:42 Parameters OK 14:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:42 Set A/D data flow result=40 14:31:42 Set A/D channel type result=40 14:31:42 Set A/D encoding result=40 14:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:42 Set channel filter=0.000000e+000 result=40 14:31:42 Config A/D Result=40 14:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:42 Get A/D filter: -9.255963e+061 result=40 14:31:42 Get A/D value=-858993460 result=40 14:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:42 Parameters OK 14:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:42 Set A/D data flow result=40 14:31:42 Set A/D channel type result=40 14:31:42 Set A/D encoding result=40 14:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:42 Set channel filter=0.000000e+000 result=40 14:31:42 Config A/D Result=40 14:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:42 Get A/D filter: -9.255963e+061 result=40 14:31:42 Get A/D value=-858993460 result=40 14:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:42 Aux= 14:31:42 Message to Camera, serial 224359 queued 14:32:19 Received message from Master: op=PointingHead serial=224372 14:32:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:32:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:32:19 Point started: ret=0 14:32:19 point_skyscan result=0 14:32:20 Check angles 14:32:20 SkyScan query 14:32:21 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 14:32:21 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 14:32:21 Check angles 14:32:21 SkyScan query 14:32:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:32:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:32:21 Message to Master queued w/err=0: serial=224372 error=0 14:32:26 Received message from Master: op=Filter serial=224373 14:32:26 Color wheel filter change from 0 to 0 14:32:26 FLIGetFilterPos err=0 currentPosition=0 14:32:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:26 Filter is already there-color wheel unchanged 14:32:26 Received message from Master: op=Shutter serial=224374 14:32:26 Shutter LASER open 14:32:27 Received message from Camera: op=State serial=224376 14:32:27 GetSingleValue result=40 Value=cccccccc 14:32:27 SkyScan query 14:32:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:32:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:27 Parameters OK 14:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:27 Set A/D data flow result=40 14:32:27 Set A/D channel type result=40 14:32:27 Set A/D encoding result=40 14:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:27 Set channel filter=0.000000e+000 result=40 14:32:27 Config A/D Result=40 14:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:27 Get A/D filter: -9.255963e+061 result=40 14:32:27 Get A/D value=-858993460 result=40 14:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:27 Parameters OK 14:32:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:27 Set A/D data flow result=40 14:32:27 Set A/D channel type result=40 14:32:27 Set A/D encoding result=40 14:32:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:27 Set channel filter=0.000000e+000 result=40 14:32:27 Config A/D Result=40 14:32:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:27 Get A/D filter: -9.255963e+061 result=40 14:32:27 Get A/D value=-858993460 result=40 14:32:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:27 Aux= 14:32:27 Message to Camera, serial 224376 queued 14:32:36 Received message from Master: op=Shutter serial=224386 14:32:36 Shutter LASER close 14:32:36 Received message from Master: op=PointingHead serial=224390 14:32:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:32:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:32:37 Point started: ret=0 14:32:37 point_skyscan result=0 14:32:37 Check angles 14:32:37 SkyScan query 14:32:38 SkyScan query done: ret=0 az=136.14<-9076 ze=-142.98<-21532 Statuses=0009 0009 14:32:38 Msec=0 True Az=136.14 Ze=-142.98 Az status=0009 Ze status=0009 14:32:38 Check angles 14:32:38 SkyScan query 14:32:39 SkyScan query done: ret=0 az=154.005<-10267 ze=-121.605<-20107 Statuses=0009 0009 14:32:39 Msec=750 True Az=154.005 Ze=-121.605 Az status=0009 Ze status=0009 14:32:39 Check angles 14:32:39 SkyScan query 14:32:39 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.575<-18705 Statuses=0009 0009 14:32:39 Msec=1500 True Az=171.495 Ze=-100.575 Az status=0009 Ze status=0009 14:32:40 Check angles 14:32:40 SkyScan query 14:32:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.665<-17311 Statuses=0008 0009 14:32:40 Msec=2250 True Az=176.01 Ze=-79.665 Az status=0008 Ze status=0009 14:32:40 Check angles 14:32:40 SkyScan query 14:32:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.68<-15912 Statuses=0008 0009 14:32:41 Msec=3000 True Az=176.01 Ze=-58.68 Az status=0008 Ze status=0009 14:32:41 Check angles 14:32:41 SkyScan query 14:32:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 14:32:42 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 14:32:42 Message to Master queued w/err=0: serial=224390 error=0 14:32:47 Received message from Master: op=Filter serial=224391 14:32:47 Color wheel filter change from 0 to 0 14:32:47 FLIGetFilterPos err=0 currentPosition=0 14:32:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:47 Filter is already there-color wheel unchanged 14:32:47 Received message from Master: op=Shutter serial=224392 14:32:47 Shutter LASER close 14:32:47 Received message from Camera: op=State serial=224394 14:32:47 GetSingleValue result=40 Value=cccccccc 14:32:47 SkyScan query 14:32:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:32:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:48 Parameters OK 14:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:48 Set A/D data flow result=40 14:32:48 Set A/D channel type result=40 14:32:48 Set A/D encoding result=40 14:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:48 Set channel filter=0.000000e+000 result=40 14:32:48 Config A/D Result=40 14:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:48 Get A/D filter: -9.255963e+061 result=40 14:32:48 Get A/D value=-858993460 result=40 14:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:48 Parameters OK 14:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:48 Set A/D data flow result=40 14:32:48 Set A/D channel type result=40 14:32:48 Set A/D encoding result=40 14:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:48 Set channel filter=0.000000e+000 result=40 14:32:48 Config A/D Result=40 14:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:48 Get A/D filter: -9.255963e+061 result=40 14:32:48 Get A/D value=-858993460 result=40 14:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:48 Aux= 14:32:48 Message to Camera, serial 224394 queued 14:33:24 Received message from Master: op=PointingHead serial=224407 14:33:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:33:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:33:25 Point started: ret=0 14:33:25 point_skyscan result=0 14:33:26 Check angles 14:33:26 SkyScan query 14:33:26 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.39<-13426 Statuses=0009 0009 14:33:26 Msec=0 True Az=152.73 Ze=-21.39 Az status=0009 Ze status=0009 14:33:26 Check angles 14:33:26 SkyScan query 14:33:27 SkyScan query done: ret=0 az=134.895<-8993 ze=-0.015<-12001 Statuses=0009 0009 14:33:27 Msec=750 True Az=134.895 Ze=-0.015 Az status=0009 Ze status=0009 14:33:27 Check angles 14:33:27 SkyScan query 14:33:28 SkyScan query done: ret=0 az=117.405<-7827 ze=20.925<-10605 Statuses=0009 0009 14:33:28 Msec=1500 True Az=117.405 Ze=20.925 Az status=0009 Ze status=0009 14:33:28 Check angles 14:33:28 SkyScan query 14:33:28 SkyScan query done: ret=0 az=99.87<-6658 ze=41.88<-9208 Statuses=0009 0009 14:33:28 Msec=2250 True Az=99.87 Ze=41.88 Az status=0009 Ze status=0009 14:33:29 Check angles 14:33:29 SkyScan query 14:33:29 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 14:33:29 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 14:33:29 Check angles 14:33:29 SkyScan query 14:33:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:33:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:33:30 Message to Master queued w/err=0: serial=224407 error=0 14:33:35 Received message from Master: op=Filter serial=224408 14:33:35 Color wheel filter change from 0 to 0 14:33:35 FLIGetFilterPos err=0 currentPosition=0 14:33:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:35 Filter is already there-color wheel unchanged 14:33:35 Received message from Master: op=Shutter serial=224409 14:33:35 Shutter LASER close 14:33:35 Received message from Camera: op=State serial=224411 14:33:35 GetSingleValue result=40 Value=cccccccc 14:33:35 SkyScan query 14:33:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:33:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:36 Parameters OK 14:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:36 Set A/D data flow result=40 14:33:36 Set A/D channel type result=40 14:33:36 Set A/D encoding result=40 14:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:36 Set channel filter=0.000000e+000 result=40 14:33:36 Config A/D Result=40 14:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:36 Get A/D filter: -9.255963e+061 result=40 14:33:36 Get A/D value=-858993460 result=40 14:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:36 Parameters OK 14:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:36 Set A/D data flow result=40 14:33:36 Set A/D channel type result=40 14:33:36 Set A/D encoding result=40 14:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:36 Set channel filter=0.000000e+000 result=40 14:33:36 Config A/D Result=40 14:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:36 Get A/D filter: -9.255963e+061 result=40 14:33:36 Get A/D value=-858993460 result=40 14:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:36 Aux= 14:33:36 Message to Camera, serial 224411 queued 14:34:13 Received message from Master: op=PointingHead serial=224424 14:34:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:34:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:34:13 Point started: ret=0 14:34:13 point_skyscan result=0 14:34:14 Check angles 14:34:14 SkyScan query 14:34:14 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 14:34:14 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 14:34:14 Check angles 14:34:14 SkyScan query 14:34:15 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 14:34:15 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 14:34:15 Check angles 14:34:15 SkyScan query 14:34:16 SkyScan query done: ret=0 az=144.345<-9623 ze=38.505<-9433 Statuses=0009 0008 14:34:16 Msec=1500 True Az=144.345 Ze=38.505 Az status=0009 Ze status=0008 14:34:16 Check angles 14:34:16 SkyScan query 14:34:17 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 14:34:17 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 14:34:17 Check angles 14:34:17 SkyScan query 14:34:17 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:34:17 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:34:17 Check angles 14:34:17 SkyScan query 14:34:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:34:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:34:18 Message to Master queued w/err=0: serial=224424 error=0 14:34:23 Received message from Master: op=Filter serial=224425 14:34:23 Color wheel filter change from 0 to 0 14:34:23 FLIGetFilterPos err=0 currentPosition=0 14:34:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:23 Filter is already there-color wheel unchanged 14:34:23 Received message from Master: op=Shutter serial=224426 14:34:23 Shutter LASER close 14:34:23 Received message from Camera: op=State serial=224428 14:34:23 GetSingleValue result=40 Value=cccccccc 14:34:23 SkyScan query 14:34:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:34:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:24 Parameters OK 14:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:24 Set A/D data flow result=40 14:34:24 Set A/D channel type result=40 14:34:24 Set A/D encoding result=40 14:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:24 Set channel filter=0.000000e+000 result=40 14:34:24 Config A/D Result=40 14:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:24 Get A/D filter: -9.255963e+061 result=40 14:34:24 Get A/D value=-858993460 result=40 14:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:24 Parameters OK 14:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:24 Set A/D data flow result=40 14:34:24 Set A/D channel type result=40 14:34:24 Set A/D encoding result=40 14:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:24 Set channel filter=0.000000e+000 result=40 14:34:24 Config A/D Result=40 14:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:24 Get A/D filter: -9.255963e+061 result=40 14:34:24 Get A/D value=-858993460 result=40 14:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:24 Aux= 14:34:24 Message to Camera, serial 224428 queued 14:35:01 Received message from Master: op=PointingHead serial=224441 14:35:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:35:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:35:01 Point started: ret=0 14:35:01 point_skyscan result=0 14:35:02 Check angles 14:35:02 SkyScan query 14:35:02 SkyScan query done: ret=0 az=152.745<-10183 ze=8.415<-11439 Statuses=0009 0009 14:35:02 Msec=0 True Az=152.745 Ze=8.415 Az status=0009 Ze status=0009 14:35:02 Check angles 14:35:02 SkyScan query 14:35:03 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.525<-12835 Statuses=0009 0009 14:35:03 Msec=750 True Az=135.18 Ze=-12.525 Az status=0009 Ze status=0009 14:35:03 Check angles 14:35:03 SkyScan query 14:35:04 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.465<-14231 Statuses=0009 0009 14:35:04 Msec=1500 True Az=117.765 Ze=-33.465 Az status=0009 Ze status=0009 14:35:04 Check angles 14:35:04 SkyScan query 14:35:05 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.555<-15437 Statuses=0009 0009 14:35:05 Msec=2250 True Az=100.365 Ze=-51.555 Az status=0009 Ze status=0009 14:35:05 Check angles 14:35:05 SkyScan query 14:35:05 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:35:05 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:35:05 Check angles 14:35:05 SkyScan query 14:35:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:35:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:35:06 Message to Master queued w/err=0: serial=224441 error=0 14:35:11 Received message from Master: op=Filter serial=224442 14:35:11 Color wheel filter change from 0 to 0 14:35:11 FLIGetFilterPos err=0 currentPosition=0 14:35:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:11 Filter is already there-color wheel unchanged 14:35:11 Received message from Master: op=Shutter serial=224443 14:35:11 Shutter LASER close 14:35:11 Received message from Camera: op=State serial=224445 14:35:11 GetSingleValue result=40 Value=cccccccc 14:35:11 SkyScan query 14:35:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:35:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:12 Parameters OK 14:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:12 Set A/D data flow result=40 14:35:12 Set A/D channel type result=40 14:35:12 Set A/D encoding result=40 14:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:12 Set channel filter=0.000000e+000 result=40 14:35:12 Config A/D Result=40 14:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:12 Get A/D filter: -9.255963e+061 result=40 14:35:12 Get A/D value=-858993460 result=40 14:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:12 Parameters OK 14:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:12 Set A/D data flow result=40 14:35:12 Set A/D channel type result=40 14:35:12 Set A/D encoding result=40 14:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:12 Set channel filter=0.000000e+000 result=40 14:35:12 Config A/D Result=40 14:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:12 Get A/D filter: -9.255963e+061 result=40 14:35:12 Get A/D value=-858993460 result=40 14:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:12 Aux= 14:35:12 Message to Camera, serial 224445 queued 14:35:49 Received message from Master: op=PointingHead serial=224458 14:35:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:35:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:35:49 Point started: ret=0 14:35:49 point_skyscan result=0 14:35:50 Check angles 14:35:50 SkyScan query 14:35:50 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.255<-17417 Statuses=0009 0009 14:35:50 Msec=0 True Az=109.155 Ze=-81.255 Az status=0009 Ze status=0009 14:35:51 Check angles 14:35:51 SkyScan query 14:35:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 14:35:51 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 14:35:51 Check angles 14:35:51 SkyScan query 14:35:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.18<-20212 Statuses=0008 0009 14:35:52 Msec=1500 True Az=112.995 Ze=-123.18 Az status=0008 Ze status=0009 14:35:52 Check angles 14:35:52 SkyScan query 14:35:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.135<-21609 Statuses=0008 0009 14:35:53 Msec=2250 True Az=112.995 Ze=-144.135 Az status=0008 Ze status=0009 [UTC 2018-12-17 14:35:53] 14:35:53 Check angles 14:35:53 SkyScan query 14:35:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 14:35:53 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 14:35:54 Check angles 14:35:54 SkyScan query 14:35:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:35:54 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:35:54 Message to Master queued w/err=0: serial=224458 error=0 14:35:59 Received message from Master: op=Filter serial=224459 14:35:59 Color wheel filter change from 0 to 0 14:35:59 FLIGetFilterPos err=0 currentPosition=0 14:35:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:59 Filter is already there-color wheel unchanged 14:35:59 Received message from Master: op=Shutter serial=224460 14:35:59 Shutter LASER open 14:36:00 Received message from Camera: op=State serial=224462 14:36:00 GetSingleValue result=40 Value=cccccccc 14:36:00 SkyScan query 14:36:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:36:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:00 Parameters OK 14:36:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:00 Set A/D data flow result=40 14:36:00 Set A/D channel type result=40 14:36:00 Set A/D encoding result=40 14:36:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:00 Set channel filter=0.000000e+000 result=40 14:36:00 Config A/D Result=40 14:36:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:00 Get A/D filter: -9.255963e+061 result=40 14:36:00 Get A/D value=-858993460 result=40 14:36:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:00 Parameters OK 14:36:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:00 Set A/D data flow result=40 14:36:00 Set A/D channel type result=40 14:36:00 Set A/D encoding result=40 14:36:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:00 Set channel filter=0.000000e+000 result=40 14:36:00 Config A/D Result=40 14:36:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:00 Get A/D filter: -9.255963e+061 result=40 14:36:00 Get A/D value=-858993460 result=40 14:36:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:00 Aux= 14:36:00 Message to Camera, serial 224462 queued 14:36:09 Received message from Master: op=Shutter serial=224472 14:36:09 Shutter LASER close 14:36:09 Received message from Master: op=PointingHead serial=224476 14:36:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:36:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:36:09 Point started: ret=0 14:36:09 point_skyscan result=0 14:36:10 Check angles 14:36:10 SkyScan query 14:36:11 SkyScan query done: ret=0 az=89.88<-5992 ze=157.29<-1514 Statuses=0009 0009 14:36:11 Msec=0 True Az=89.88 Ze=157.29 Az status=0009 Ze status=0009 14:36:11 Check angles 14:36:11 SkyScan query 14:36:11 SkyScan query done: ret=0 az=72.045<-4803 ze=135.9<-2940 Statuses=0009 0009 14:36:11 Msec=750 True Az=72.045 Ze=135.9 Az status=0009 Ze status=0009 14:36:12 Check angles 14:36:12 SkyScan query 14:36:12 SkyScan query done: ret=0 az=54.345<-3623 ze=114.495<-4367 Statuses=0009 0009 14:36:12 Msec=1500 True Az=54.345 Ze=114.495 Az status=0009 Ze status=0009 14:36:12 Check angles 14:36:12 SkyScan query 14:36:13 SkyScan query done: ret=0 az=41.01<-2734 ze=93.585<-5761 Statuses=0009 0009 14:36:13 Msec=2250 True Az=41.01 Ze=93.585 Az status=0009 Ze status=0009 14:36:13 Check angles 14:36:13 SkyScan query 14:36:14 SkyScan query done: ret=0 az=40.98<-2732 ze=72.6<-7160 Statuses=0008 0009 14:36:14 Msec=3000 True Az=40.98 Ze=72.6 Az status=0008 Ze status=0009 14:36:14 Check angles 14:36:14 SkyScan query 14:36:14 SkyScan query done: ret=0 az=40.98<-2732 ze=52.35<-8510 Statuses=0008 0009 14:36:14 Msec=3750 True Az=40.98 Ze=52.35 Az status=0008 Ze status=0009 14:36:15 Check angles 14:36:15 SkyScan query 14:36:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:36:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:36:15 Message to Master queued w/err=0: serial=224476 error=0 14:36:20 Received message from Master: op=Filter serial=224477 14:36:20 Color wheel filter change from 0 to 0 14:36:20 FLIGetFilterPos err=0 currentPosition=0 14:36:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:20 Filter is already there-color wheel unchanged 14:36:20 Received message from Master: op=Shutter serial=224478 14:36:20 Shutter LASER close 14:36:21 Received message from Camera: op=State serial=224480 14:36:21 GetSingleValue result=40 Value=cccccccc 14:36:21 SkyScan query 14:36:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:36:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:21 Parameters OK 14:36:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:21 Set A/D data flow result=40 14:36:21 Set A/D channel type result=40 14:36:21 Set A/D encoding result=40 14:36:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:21 Set channel filter=0.000000e+000 result=40 14:36:21 Config A/D Result=40 14:36:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:21 Get A/D filter: -9.255963e+061 result=40 14:36:21 Get A/D value=-858993460 result=40 14:36:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:21 Parameters OK 14:36:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:21 Set A/D data flow result=40 14:36:21 Set A/D channel type result=40 14:36:21 Set A/D encoding result=40 14:36:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:21 Set channel filter=0.000000e+000 result=40 14:36:21 Config A/D Result=40 14:36:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:21 Get A/D filter: -9.255963e+061 result=40 14:36:21 Get A/D value=-858993460 result=40 14:36:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:21 Aux= 14:36:21 Message to Camera, serial 224480 queued 14:36:58 Received message from Master: op=PointingHead serial=224493 14:36:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:36:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:36:58 Point started: ret=0 14:36:58 point_skyscan result=0 14:36:59 Check angles 14:36:59 SkyScan query 14:37:00 SkyScan query done: ret=0 az=64.095<-4273 ze=66.54<-7564 Statuses=0009 0008 14:37:00 Msec=0 True Az=64.095 Ze=66.54 Az status=0009 Ze status=0008 14:37:00 Check angles 14:37:00 SkyScan query 14:37:00 SkyScan query done: ret=0 az=81.36<-5424 ze=66.51<-7566 Statuses=0009 0008 14:37:00 Msec=750 True Az=81.36 Ze=66.51 Az status=0009 Ze status=0008 14:37:01 Check angles 14:37:01 SkyScan query 14:37:01 SkyScan query done: ret=0 az=99<-6600 ze=66.495<-7567 Statuses=0009 0008 14:37:01 Msec=1500 True Az=99 Ze=66.495 Az status=0009 Ze status=0008 14:37:01 Check angles 14:37:01 SkyScan query 14:37:02 SkyScan query done: ret=0 az=116.415<-7761 ze=66.495<-7567 Statuses=0009 0008 14:37:02 Msec=2250 True Az=116.415 Ze=66.495 Az status=0009 Ze status=0008 14:37:02 Check angles 14:37:02 SkyScan query 14:37:03 SkyScan query done: ret=0 az=133.965<-8931 ze=66.495<-7567 Statuses=0009 0008 14:37:03 Msec=3000 True Az=133.965 Ze=66.495 Az status=0009 Ze status=0008 14:37:03 Check angles 14:37:03 SkyScan query 14:37:03 SkyScan query done: ret=0 az=151.305<-10087 ze=66.495<-7567 Statuses=0009 0008 14:37:03 Msec=3750 True Az=151.305 Ze=66.495 Az status=0009 Ze status=0008 14:37:04 Check angles 14:37:04 SkyScan query 14:37:04 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:37:04 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:37:04 Message to Master queued w/err=0: serial=224493 error=0 14:37:09 Received message from Master: op=Filter serial=224494 14:37:09 Color wheel filter change from 0 to 0 14:37:09 FLIGetFilterPos err=0 currentPosition=0 14:37:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:09 Filter is already there-color wheel unchanged 14:37:09 Received message from Master: op=Shutter serial=224495 14:37:09 Shutter LASER close 14:37:09 Received message from Camera: op=State serial=224497 14:37:09 GetSingleValue result=40 Value=cccccccc 14:37:09 SkyScan query 14:37:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:37:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:10 Parameters OK 14:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:10 Set A/D data flow result=40 14:37:10 Set A/D channel type result=40 14:37:10 Set A/D encoding result=40 14:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:10 Set channel filter=0.000000e+000 result=40 14:37:10 Config A/D Result=40 14:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:10 Get A/D filter: -9.255963e+061 result=40 14:37:10 Get A/D value=-858993460 result=40 14:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:10 Parameters OK 14:37:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:10 Set A/D data flow result=40 14:37:10 Set A/D channel type result=40 14:37:10 Set A/D encoding result=40 14:37:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:10 Set channel filter=0.000000e+000 result=40 14:37:10 Config A/D Result=40 14:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:10 Get A/D filter: -9.255963e+061 result=40 14:37:10 Get A/D value=-858993460 result=40 14:37:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:10 Aux= 14:37:10 Message to Camera, serial 224497 queued 14:37:47 Received message from Master: op=PointingHead serial=224510 14:37:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:37:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:37:47 Point started: ret=0 14:37:47 point_skyscan result=0 14:37:48 Check angles 14:37:48 SkyScan query 14:37:48 SkyScan query done: ret=0 az=134.535<-8969 ze=36.39<-9574 Statuses=0009 0009 14:37:48 Msec=0 True Az=134.535 Ze=36.39 Az status=0009 Ze status=0009 14:37:49 Check angles 14:37:49 SkyScan query 14:37:49 SkyScan query done: ret=0 az=117.06<-7804 ze=15.465<-10969 Statuses=0009 0009 14:37:49 Msec=750 True Az=117.06 Ze=15.465 Az status=0009 Ze status=0009 14:37:49 Check angles 14:37:49 SkyScan query 14:37:50 SkyScan query done: ret=0 az=99.15<-6610 ze=-6.03<-12402 Statuses=0009 0009 14:37:50 Msec=1500 True Az=99.15 Ze=-6.03 Az status=0009 Ze status=0009 14:37:50 Check angles 14:37:50 SkyScan query 14:37:51 SkyScan query done: ret=0 az=81.825<-5455 ze=-26.985<-13799 Statuses=0009 0009 14:37:51 Msec=2250 True Az=81.825 Ze=-26.985 Az status=0009 Ze status=0009 14:37:51 Check angles 14:37:51 SkyScan query 14:37:51 SkyScan query done: ret=0 az=64.215<-4281 ze=-38.58<-14572 Statuses=0009 0008 14:37:51 Msec=3000 True Az=64.215 Ze=-38.58 Az status=0009 Ze status=0008 14:37:52 Check angles 14:37:52 SkyScan query 14:37:52 SkyScan query done: ret=0 az=46.515<-3101 ze=-38.52<-14568 Statuses=0009 0008 14:37:52 Msec=3750 True Az=46.515 Ze=-38.52 Az status=0009 Ze status=0008 14:37:52 Check angles 14:37:52 SkyScan query 14:37:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:37:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:37:53 Message to Master queued w/err=0: serial=224510 error=0 14:37:58 Received message from Master: op=Filter serial=224511 14:37:58 Color wheel filter change from 0 to 0 14:37:58 FLIGetFilterPos err=0 currentPosition=0 14:37:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:58 Filter is already there-color wheel unchanged 14:37:58 Received message from Master: op=Shutter serial=224512 14:37:58 Shutter LASER close 14:37:58 Received message from Camera: op=State serial=224514 14:37:58 GetSingleValue result=40 Value=cccccccc 14:37:58 SkyScan query 14:37:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:37:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:59 Parameters OK 14:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:59 Set A/D data flow result=40 14:37:59 Set A/D channel type result=40 14:37:59 Set A/D encoding result=40 14:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:59 Set channel filter=0.000000e+000 result=40 14:37:59 Config A/D Result=40 14:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:59 Get A/D filter: -9.255963e+061 result=40 14:37:59 Get A/D value=-858993460 result=40 14:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:59 Parameters OK 14:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:59 Set A/D data flow result=40 14:37:59 Set A/D channel type result=40 14:37:59 Set A/D encoding result=40 14:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:59 Set channel filter=0.000000e+000 result=40 14:37:59 Config A/D Result=40 14:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:59 Get A/D filter: -9.255963e+061 result=40 14:37:59 Get A/D value=-858993460 result=40 14:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:59 Aux= 14:37:59 Message to Camera, serial 224514 queued 14:38:36 Received message from Master: op=PointingHead serial=224527 14:38:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:38:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:38:36 Point started: ret=0 14:38:36 point_skyscan result=0 14:38:37 Check angles 14:38:37 SkyScan query 14:38:37 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.76<-16584 Statuses=0009 0009 14:38:37 Msec=0 True Az=64.38 Ze=-68.76 Az status=0009 Ze status=0009 14:38:37 Check angles 14:38:37 SkyScan query 14:38:38 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.7<-17980 Statuses=0009 0009 14:38:38 Msec=750 True Az=81.795 Ze=-89.7 Az status=0009 Ze status=0009 14:38:38 Check angles 14:38:38 SkyScan query 14:38:39 SkyScan query done: ret=0 az=99.735<-6649 ze=-111.06<-19404 Statuses=0009 0009 14:38:39 Msec=1500 True Az=99.735 Ze=-111.06 Az status=0009 Ze status=0009 14:38:39 Check angles 14:38:39 SkyScan query 14:38:40 SkyScan query done: ret=0 az=117.18<-7812 ze=-132.015<-20801 Statuses=0009 0009 14:38:40 Msec=2250 True Az=117.18 Ze=-132.015 Az status=0009 Ze status=0009 14:38:40 Check angles 14:38:40 SkyScan query 14:38:40 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 14:38:40 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 14:38:40 Check angles 14:38:40 SkyScan query 14:38:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:38:41 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:38:41 Message to Master queued w/err=0: serial=224527 error=0 14:38:46 Received message from Master: op=Filter serial=224528 14:38:46 Color wheel filter change from 0 to 0 14:38:46 FLIGetFilterPos err=0 currentPosition=0 14:38:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:46 Filter is already there-color wheel unchanged 14:38:46 Received message from Master: op=Shutter serial=224529 14:38:46 Shutter LASER close 14:38:46 Received message from Camera: op=State serial=224531 14:38:46 GetSingleValue result=40 Value=cccccccc 14:38:46 SkyScan query 14:38:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:38:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:47 Parameters OK 14:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:47 Set A/D data flow result=40 14:38:47 Set A/D channel type result=40 14:38:47 Set A/D encoding result=40 14:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:47 Set channel filter=0.000000e+000 result=40 14:38:47 Config A/D Result=40 14:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:47 Get A/D filter: -9.255963e+061 result=40 14:38:47 Get A/D value=-858993460 result=40 14:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:47 Parameters OK 14:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:47 Set A/D data flow result=40 14:38:47 Set A/D channel type result=40 14:38:47 Set A/D encoding result=40 14:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:47 Set channel filter=0.000000e+000 result=40 14:38:47 Config A/D Result=40 14:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:47 Get A/D filter: -9.255963e+061 result=40 14:38:47 Get A/D value=-858993460 result=40 14:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:47 Aux= 14:38:47 Message to Camera, serial 224531 queued 14:39:24 Received message from Master: op=PointingHead serial=224544 14:39:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:39:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:39:24 Point started: ret=0 14:39:24 point_skyscan result=0 14:39:25 Check angles 14:39:25 SkyScan query 14:39:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 14:39:25 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 14:39:26 Check angles 14:39:26 SkyScan query 14:39:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:39:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:39:26 Message to Master queued w/err=0: serial=224544 error=0 14:39:31 Received message from Master: op=Filter serial=224545 14:39:31 Color wheel filter change from 0 to 0 14:39:31 FLIGetFilterPos err=0 currentPosition=0 14:39:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:31 Filter is already there-color wheel unchanged 14:39:31 Received message from Master: op=Shutter serial=224546 14:39:31 Shutter LASER open 14:39:31 Received message from Camera: op=State serial=224548 14:39:31 GetSingleValue result=40 Value=cccccccc 14:39:31 SkyScan query 14:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:39:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:32 Parameters OK 14:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:32 Set A/D data flow result=40 14:39:32 Set A/D channel type result=40 14:39:32 Set A/D encoding result=40 14:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:32 Set channel filter=0.000000e+000 result=40 14:39:32 Config A/D Result=40 14:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:32 Get A/D filter: -9.255963e+061 result=40 14:39:32 Get A/D value=-858993460 result=40 14:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:32 Parameters OK 14:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:32 Set A/D data flow result=40 14:39:32 Set A/D channel type result=40 14:39:32 Set A/D encoding result=40 14:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:32 Set channel filter=0.000000e+000 result=40 14:39:32 Config A/D Result=40 14:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:32 Get A/D filter: -9.255963e+061 result=40 14:39:32 Get A/D value=-858993460 result=40 14:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:32 Aux= 14:39:32 Message to Camera, serial 224548 queued 14:39:40 Received message from Master: op=Shutter serial=224558 14:39:40 Shutter LASER close 14:39:41 Received message from Master: op=PointingHead serial=224562 14:39:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:39:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:39:41 Point started: ret=0 14:39:41 point_skyscan result=0 14:39:42 Check angles 14:39:42 SkyScan query 14:39:43 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.325<-21555 Statuses=0009 0009 14:39:43 Msec=0 True Az=135.885 Ze=-143.325 Az status=0009 Ze status=0009 14:39:43 Check angles 14:39:43 SkyScan query 14:39:43 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.325<-20155 Statuses=0009 0009 14:39:43 Msec=750 True Az=153.36 Ze=-122.325 Az status=0009 Ze status=0009 14:39:44 Check angles 14:39:44 SkyScan query 14:39:44 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.445<-18763 Statuses=0009 0009 14:39:44 Msec=1500 True Az=170.85 Ze=-101.445 Az status=0009 Ze status=0009 14:39:44 Check angles 14:39:44 SkyScan query 14:39:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.475<-17365 Statuses=0008 0009 14:39:45 Msec=2250 True Az=175.995 Ze=-80.475 Az status=0008 Ze status=0009 14:39:45 Check angles 14:39:45 SkyScan query 14:39:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.505<-15967 Statuses=0008 0009 14:39:46 Msec=3000 True Az=176.01 Ze=-59.505 Az status=0008 Ze status=0009 14:39:46 Check angles 14:39:46 SkyScan query 14:39:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:39:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:39:46 Message to Master queued w/err=0: serial=224562 error=0 14:39:51 Received message from Master: op=Filter serial=224563 14:39:51 Color wheel filter change from 0 to 0 14:39:51 FLIGetFilterPos err=0 currentPosition=0 14:39:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:51 Filter is already there-color wheel unchanged 14:39:52 Received message from Master: op=Shutter serial=224564 14:39:52 Shutter LASER close 14:39:52 Received message from Camera: op=State serial=224566 14:39:52 GetSingleValue result=40 Value=cccccccc 14:39:52 SkyScan query 14:39:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:39:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:52 Parameters OK 14:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:52 Set A/D data flow result=40 14:39:52 Set A/D channel type result=40 14:39:52 Set A/D encoding result=40 14:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:52 Set channel filter=0.000000e+000 result=40 14:39:52 Config A/D Result=40 14:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:52 Get A/D filter: -9.255963e+061 result=40 14:39:52 Get A/D value=-858993460 result=40 14:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:52 Parameters OK 14:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:52 Set A/D data flow result=40 14:39:52 Set A/D channel type result=40 14:39:52 Set A/D encoding result=40 14:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:52 Set channel filter=0.000000e+000 result=40 14:39:52 Config A/D Result=40 14:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:52 Get A/D filter: -9.255963e+061 result=40 14:39:52 Get A/D value=-858993460 result=40 14:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:52 Aux= 14:39:52 Message to Camera, serial 224566 queued 14:40:29 Received message from Master: op=PointingHead serial=224579 14:40:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:40:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:40:30 Point started: ret=0 14:40:30 point_skyscan result=0 14:40:30 Check angles 14:40:30 SkyScan query 14:40:31 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.9<-13460 Statuses=0009 0009 14:40:31 Msec=0 True Az=153.075 Ze=-21.9 Az status=0009 Ze status=0009 14:40:31 Check angles 14:40:31 SkyScan query 14:40:32 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.9<-12060 Statuses=0009 0009 14:40:32 Msec=750 True Az=135.615 Ze=-0.9 Az status=0009 Ze status=0009 14:40:32 Check angles 14:40:32 SkyScan query 14:40:32 SkyScan query done: ret=0 az=118.08<-7872 ze=20.025<-10665 Statuses=0009 0009 14:40:32 Msec=1500 True Az=118.08 Ze=20.025 Az status=0009 Ze status=0009 14:40:33 Check angles 14:40:33 SkyScan query 14:40:33 SkyScan query done: ret=0 az=100.725<-6715 ze=40.995<-9267 Statuses=0009 0009 14:40:33 Msec=2250 True Az=100.725 Ze=40.995 Az status=0009 Ze status=0009 14:40:33 Check angles 14:40:33 SkyScan query 14:40:34 SkyScan query done: ret=0 az=85.965<-5731 ze=51.54<-8564 Statuses=0009 0008 14:40:34 Msec=3000 True Az=85.965 Ze=51.54 Az status=0009 Ze status=0008 14:40:34 Check angles 14:40:34 SkyScan query 14:40:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:40:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:40:35 Message to Master queued w/err=0: serial=224579 error=0 14:40:40 Received message from Master: op=Filter serial=224580 14:40:40 Color wheel filter change from 0 to 0 14:40:40 FLIGetFilterPos err=0 currentPosition=0 14:40:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:40 Filter is already there-color wheel unchanged 14:40:40 Received message from Master: op=Shutter serial=224581 14:40:40 Shutter LASER close 14:40:40 Received message from Camera: op=State serial=224583 14:40:40 GetSingleValue result=40 Value=cccccccc 14:40:40 SkyScan query 14:40:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:40:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:41 Parameters OK 14:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:41 Set A/D data flow result=40 14:40:41 Set A/D channel type result=40 14:40:41 Set A/D encoding result=40 14:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:41 Set channel filter=0.000000e+000 result=40 14:40:41 Config A/D Result=40 14:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:41 Get A/D filter: -9.255963e+061 result=40 14:40:41 Get A/D value=-858993460 result=40 14:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:41 Parameters OK 14:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:41 Set A/D data flow result=40 14:40:41 Set A/D channel type result=40 14:40:41 Set A/D encoding result=40 14:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:41 Set channel filter=0.000000e+000 result=40 14:40:41 Config A/D Result=40 14:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:41 Get A/D filter: -9.255963e+061 result=40 14:40:41 Get A/D value=-858993460 result=40 14:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:41 Aux= 14:40:41 Message to Camera, serial 224583 queued 14:41:16 Received message from Master: op=PointingHead serial=224595 14:41:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:41:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:41:17 Point started: ret=0 14:41:17 point_skyscan result=0 14:41:18 Check angles 14:41:18 SkyScan query 14:41:18 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 14:41:18 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 14:41:18 Check angles 14:41:18 SkyScan query 14:41:19 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 14:41:19 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 14:41:19 Check angles 14:41:19 SkyScan query 14:41:20 SkyScan query done: ret=0 az=143.805<-9587 ze=38.505<-9433 Statuses=0009 0008 14:41:20 Msec=1500 True Az=143.805 Ze=38.505 Az status=0009 Ze status=0008 14:41:20 Check angles 14:41:20 SkyScan query 14:41:20 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 14:41:20 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 14:41:21 Check angles 14:41:21 SkyScan query 14:41:21 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:41:21 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:41:21 Check angles 14:41:21 SkyScan query 14:41:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:41:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:41:22 Message to Master queued w/err=0: serial=224595 error=0 14:41:27 Received message from Master: op=Filter serial=224596 14:41:27 Color wheel filter change from 0 to 0 14:41:27 FLIGetFilterPos err=0 currentPosition=0 14:41:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:27 Filter is already there-color wheel unchanged 14:41:27 Received message from Master: op=Shutter serial=224597 14:41:27 Shutter LASER close 14:41:27 Received message from Camera: op=State serial=224599 14:41:27 GetSingleValue result=40 Value=cccccccc 14:41:27 SkyScan query 14:41:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:41:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:28 Parameters OK 14:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:28 Set A/D data flow result=40 14:41:28 Set A/D channel type result=40 14:41:28 Set A/D encoding result=40 14:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:28 Set channel filter=0.000000e+000 result=40 14:41:28 Config A/D Result=40 14:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:28 Get A/D filter: -9.255963e+061 result=40 14:41:28 Get A/D value=-858993460 result=40 14:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:28 Parameters OK 14:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:28 Set A/D data flow result=40 14:41:28 Set A/D channel type result=40 14:41:28 Set A/D encoding result=40 14:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:28 Set channel filter=0.000000e+000 result=40 14:41:28 Config A/D Result=40 14:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:28 Get A/D filter: -9.255963e+061 result=40 14:41:28 Get A/D value=-858993460 result=40 14:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:28 Aux= 14:41:28 Message to Camera, serial 224599 queued 14:42:04 Received message from Master: op=PointingHead serial=224612 14:42:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:42:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:42:05 Point started: ret=0 14:42:05 point_skyscan result=0 14:42:06 Check angles 14:42:06 SkyScan query 14:42:06 SkyScan query done: ret=0 az=152.955<-10197 ze=8.61<-11426 Statuses=0009 0009 14:42:06 Msec=0 True Az=152.955 Ze=8.61 Az status=0009 Ze status=0009 14:42:06 Check angles 14:42:06 SkyScan query 14:42:07 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.78<-12852 Statuses=0009 0009 14:42:07 Msec=750 True Az=135.135 Ze=-12.78 Az status=0009 Ze status=0009 14:42:07 Check angles 14:42:07 SkyScan query 14:42:08 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.75<-14250 Statuses=0009 0009 14:42:08 Msec=1500 True Az=117.63 Ze=-33.75 Az status=0009 Ze status=0009 14:42:08 Check angles 14:42:08 SkyScan query 14:42:08 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 14:42:08 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 14:42:09 Check angles 14:42:09 SkyScan query 14:42:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:42:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:42:09 Check angles 14:42:09 SkyScan query 14:42:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:42:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:42:10 Message to Master queued w/err=0: serial=224612 error=0 14:42:15 Received message from Master: op=Filter serial=224613 14:42:15 Color wheel filter change from 0 to 0 14:42:15 FLIGetFilterPos err=0 currentPosition=0 14:42:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:15 Filter is already there-color wheel unchanged 14:42:15 Received message from Master: op=Shutter serial=224614 14:42:15 Shutter LASER close 14:42:15 Received message from Camera: op=State serial=224616 14:42:15 GetSingleValue result=40 Value=cccccccc 14:42:15 SkyScan query 14:42:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:42:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:16 Parameters OK 14:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:16 Set A/D data flow result=40 14:42:16 Set A/D channel type result=40 14:42:16 Set A/D encoding result=40 14:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:16 Set channel filter=0.000000e+000 result=40 14:42:16 Config A/D Result=40 14:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:16 Get A/D filter: -9.255963e+061 result=40 14:42:16 Get A/D value=-858993460 result=40 14:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:16 Parameters OK 14:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:16 Set A/D data flow result=40 14:42:16 Set A/D channel type result=40 14:42:16 Set A/D encoding result=40 14:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:16 Set channel filter=0.000000e+000 result=40 14:42:16 Config A/D Result=40 14:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:16 Get A/D filter: -9.255963e+061 result=40 14:42:16 Get A/D value=-858993460 result=40 14:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:16 Aux= 14:42:16 Message to Camera, serial 224616 queued 14:42:53 Received message from Master: op=PointingHead serial=224629 14:42:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:42:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:42:53 Point started: ret=0 14:42:53 point_skyscan result=0 14:42:54 Check angles 14:42:54 SkyScan query 14:42:54 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.435<-17429 Statuses=0009 0009 14:42:54 Msec=0 True Az=109.14 Ze=-81.435 Az status=0009 Ze status=0009 14:42:54 Check angles 14:42:54 SkyScan query 14:42:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 14:42:55 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 14:42:55 Check angles 14:42:55 SkyScan query 14:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.315<-20221 Statuses=0008 0009 14:42:56 Msec=1500 True Az=112.995 Ze=-123.315 Az status=0008 Ze status=0009 14:42:56 Check angles 14:42:56 SkyScan query 14:42:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.285<-21619 Statuses=0008 0009 14:42:57 Msec=2250 True Az=112.995 Ze=-144.285 Az status=0008 Ze status=0009 14:42:57 Check angles 14:42:57 SkyScan query 14:42:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 14:42:57 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 14:42:57 Check angles 14:42:57 SkyScan query 14:42:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:42:58 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:42:58 Message to Master queued w/err=0: serial=224629 error=0 14:43:03 Received message from Master: op=Filter serial=224630 14:43:03 Color wheel filter change from 0 to 0 14:43:03 FLIGetFilterPos err=0 currentPosition=0 14:43:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:03 Filter is already there-color wheel unchanged 14:43:03 Received message from Master: op=Shutter serial=224631 14:43:03 Shutter LASER open 14:43:03 Received message from Camera: op=State serial=224633 14:43:03 GetSingleValue result=40 Value=cccccccc 14:43:03 SkyScan query 14:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:43:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:04 Parameters OK 14:43:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:04 Set A/D data flow result=40 14:43:04 Set A/D channel type result=40 14:43:04 Set A/D encoding result=40 14:43:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:04 Set channel filter=0.000000e+000 result=40 14:43:04 Config A/D Result=40 14:43:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:04 Get A/D filter: -9.255963e+061 result=40 14:43:04 Get A/D value=-858993460 result=40 14:43:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:04 Parameters OK 14:43:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:04 Set A/D data flow result=40 14:43:04 Set A/D channel type result=40 14:43:04 Set A/D encoding result=40 14:43:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:04 Set channel filter=0.000000e+000 result=40 14:43:04 Config A/D Result=40 14:43:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:04 Get A/D filter: -9.255963e+061 result=40 14:43:04 Get A/D value=-858993460 result=40 14:43:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:04 Aux= 14:43:04 Message to Camera, serial 224633 queued 14:43:12 Received message from Master: op=Shutter serial=224643 14:43:12 Shutter LASER close 14:43:13 Received message from Master: op=PointingHead serial=224647 14:43:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:43:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:43:13 Point started: ret=0 14:43:13 point_skyscan result=0 14:43:14 Check angles 14:43:14 SkyScan query 14:43:14 SkyScan query done: ret=0 az=89.865<-5991 ze=157.425<-1505 Statuses=0009 0009 14:43:14 Msec=0 True Az=89.865 Ze=157.425 Az status=0009 Ze status=0009 14:43:15 Check angles 14:43:15 SkyScan query 14:43:15 SkyScan query done: ret=0 az=72.015<-4801 ze=136.035<-2931 Statuses=0009 0009 14:43:15 Msec=750 True Az=72.015 Ze=136.035 Az status=0009 Ze status=0009 14:43:15 Check angles 14:43:15 SkyScan query 14:43:16 SkyScan query done: ret=0 az=54.255<-3617 ze=114.615<-4359 Statuses=0009 0009 14:43:16 Msec=1500 True Az=54.255 Ze=114.615 Az status=0009 Ze status=0009 14:43:16 Check angles 14:43:16 SkyScan query 14:43:17 SkyScan query done: ret=0 az=41.01<-2734 ze=93.705<-5753 Statuses=0009 0009 14:43:17 Msec=2250 True Az=41.01 Ze=93.705 Az status=0009 Ze status=0009 14:43:17 Check angles 14:43:17 SkyScan query 14:43:17 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 14:43:17 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 14:43:18 Check angles 14:43:18 SkyScan query 14:43:18 SkyScan query done: ret=0 az=40.98<-2732 ze=52.17<-8522 Statuses=0008 0009 14:43:18 Msec=3750 True Az=40.98 Ze=52.17 Az status=0008 Ze status=0009 14:43:18 Check angles 14:43:18 SkyScan query 14:43:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:43:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:43:19 Message to Master queued w/err=0: serial=224647 error=0 14:43:24 Received message from Master: op=Filter serial=224648 14:43:24 Color wheel filter change from 0 to 0 14:43:24 FLIGetFilterPos err=0 currentPosition=0 14:43:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:24 Filter is already there-color wheel unchanged 14:43:24 Received message from Master: op=Shutter serial=224649 14:43:24 Shutter LASER close 14:43:24 Received message from Camera: op=State serial=224651 14:43:24 GetSingleValue result=40 Value=cccccccc 14:43:24 SkyScan query 14:43:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:43:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:25 Parameters OK 14:43:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:25 Set A/D data flow result=40 14:43:25 Set A/D channel type result=40 14:43:25 Set A/D encoding result=40 14:43:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:25 Set channel filter=0.000000e+000 result=40 14:43:25 Config A/D Result=40 14:43:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:25 Get A/D filter: -9.255963e+061 result=40 14:43:25 Get A/D value=-858993460 result=40 14:43:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:25 Parameters OK 14:43:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:25 Set A/D data flow result=40 14:43:25 Set A/D channel type result=40 14:43:25 Set A/D encoding result=40 14:43:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:25 Set channel filter=0.000000e+000 result=40 14:43:25 Config A/D Result=40 14:43:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:25 Get A/D filter: -9.255963e+061 result=40 14:43:25 Get A/D value=-858993460 result=40 14:43:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:25 Aux= 14:43:25 Message to Camera, serial 224651 queued 14:44:02 Received message from Master: op=PointingHead serial=224664 14:44:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:44:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:44:02 Point started: ret=0 14:44:02 point_skyscan result=0 14:44:03 Check angles 14:44:03 SkyScan query 14:44:03 SkyScan query done: ret=0 az=64.425<-4295 ze=66.54<-7564 Statuses=0009 0008 14:44:03 Msec=0 True Az=64.425 Ze=66.54 Az status=0009 Ze status=0008 14:44:04 Check angles 14:44:04 SkyScan query 14:44:04 SkyScan query done: ret=0 az=82.08<-5472 ze=66.51<-7566 Statuses=0009 0008 14:44:04 Msec=750 True Az=82.08 Ze=66.51 Az status=0009 Ze status=0008 14:44:04 Check angles 14:44:04 SkyScan query 14:44:05 SkyScan query done: ret=0 az=99.66<-6644 ze=66.495<-7567 Statuses=0009 0008 14:44:05 Msec=1500 True Az=99.66 Ze=66.495 Az status=0009 Ze status=0008 14:44:05 Check angles 14:44:05 SkyScan query 14:44:06 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 14:44:06 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 14:44:06 Check angles 14:44:06 SkyScan query 14:44:06 SkyScan query done: ret=0 az=134.535<-8969 ze=66.495<-7567 Statuses=0009 0008 14:44:06 Msec=3000 True Az=134.535 Ze=66.495 Az status=0009 Ze status=0008 14:44:07 Check angles 14:44:07 SkyScan query 14:44:07 SkyScan query done: ret=0 az=152.19<-10146 ze=66.495<-7567 Statuses=0009 0008 14:44:07 Msec=3750 True Az=152.19 Ze=66.495 Az status=0009 Ze status=0008 14:44:07 Check angles 14:44:07 SkyScan query 14:44:08 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:44:08 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:44:08 Message to Master queued w/err=0: serial=224664 error=0 14:44:13 Received message from Master: op=Filter serial=224665 14:44:13 Color wheel filter change from 0 to 0 14:44:13 FLIGetFilterPos err=0 currentPosition=0 14:44:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:13 Filter is already there-color wheel unchanged 14:44:13 Received message from Master: op=Shutter serial=224666 14:44:13 Shutter LASER close 14:44:13 Received message from Camera: op=State serial=224668 14:44:13 GetSingleValue result=40 Value=cccccccc 14:44:13 SkyScan query 14:44:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:44:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:14 Parameters OK 14:44:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:14 Set A/D data flow result=40 14:44:14 Set A/D channel type result=40 14:44:14 Set A/D encoding result=40 14:44:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:14 Set channel filter=0.000000e+000 result=40 14:44:14 Config A/D Result=40 14:44:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:14 Get A/D filter: -9.255963e+061 result=40 14:44:14 Get A/D value=-858993460 result=40 14:44:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:14 Parameters OK 14:44:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:14 Set A/D data flow result=40 14:44:14 Set A/D channel type result=40 14:44:14 Set A/D encoding result=40 14:44:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:14 Set channel filter=0.000000e+000 result=40 14:44:14 Config A/D Result=40 14:44:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:14 Get A/D filter: -9.255963e+061 result=40 14:44:14 Get A/D value=-858993460 result=40 14:44:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:14 Aux= 14:44:14 Message to Camera, serial 224668 queued 14:44:51 Received message from Master: op=PointingHead serial=224681 14:44:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:44:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:44:51 Point started: ret=0 14:44:51 point_skyscan result=0 14:44:52 Check angles 14:44:52 SkyScan query 14:44:52 SkyScan query done: ret=0 az=134.805<-8987 ze=36.54<-9564 Statuses=0009 0009 14:44:52 Msec=0 True Az=134.805 Ze=36.54 Az status=0009 Ze status=0009 14:44:52 Check angles 14:44:52 SkyScan query 14:44:53 SkyScan query done: ret=0 az=117.315<-7821 ze=15.6<-10960 Statuses=0009 0009 14:44:53 Msec=750 True Az=117.315 Ze=15.6 Az status=0009 Ze status=0009 14:44:53 Check angles 14:44:53 SkyScan query 14:44:54 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.37<-12358 Statuses=0009 0009 14:44:54 Msec=1500 True Az=99.96 Ze=-5.37 Az status=0009 Ze status=0009 14:44:54 Check angles 14:44:54 SkyScan query 14:44:55 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.325<-13755 Statuses=0009 0009 14:44:55 Msec=2250 True Az=82.44 Ze=-26.325 Az status=0009 Ze status=0009 14:44:55 Check angles 14:44:55 SkyScan query 14:44:55 SkyScan query done: ret=0 az=64.83<-4322 ze=-38.565<-14571 Statuses=0009 0008 14:44:55 Msec=3000 True Az=64.83 Ze=-38.565 Az status=0009 Ze status=0008 14:44:55 Check angles 14:44:55 SkyScan query 14:44:56 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 14:44:56 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 14:44:56 Check angles 14:44:56 SkyScan query 14:44:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:44:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:44:57 Message to Master queued w/err=0: serial=224681 error=0 14:45:02 Received message from Master: op=Filter serial=224682 14:45:02 Color wheel filter change from 0 to 0 14:45:02 FLIGetFilterPos err=0 currentPosition=0 14:45:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:02 Filter is already there-color wheel unchanged 14:45:02 Received message from Master: op=Shutter serial=224683 14:45:02 Shutter LASER close 14:45:02 Received message from Camera: op=State serial=224685 14:45:02 GetSingleValue result=40 Value=cccccccc 14:45:02 SkyScan query 14:45:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:45:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:03 Parameters OK 14:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:03 Set A/D data flow result=40 14:45:03 Set A/D channel type result=40 14:45:03 Set A/D encoding result=40 14:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:03 Set channel filter=0.000000e+000 result=40 14:45:03 Config A/D Result=40 14:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:03 Get A/D filter: -9.255963e+061 result=40 14:45:03 Get A/D value=-858993460 result=40 14:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:03 Parameters OK 14:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:03 Set A/D data flow result=40 14:45:03 Set A/D channel type result=40 14:45:03 Set A/D encoding result=40 14:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:03 Set channel filter=0.000000e+000 result=40 14:45:03 Config A/D Result=40 14:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:03 Get A/D filter: -9.255963e+061 result=40 14:45:03 Get A/D value=-858993460 result=40 14:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:03 Aux= 14:45:03 Message to Camera, serial 224685 queued 14:45:27 Received message from Master: op=Identify serial=224686 14:45:40 Received message from Master: op=PointingHead serial=224701 14:45:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:45:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:45:40 Point started: ret=0 14:45:40 point_skyscan result=0 14:45:41 Check angles 14:45:41 SkyScan query 14:45:41 SkyScan query done: ret=0 az=63.75<-4250 ze=-67.98<-16532 Statuses=0009 0009 14:45:41 Msec=0 True Az=63.75 Ze=-67.98 Az status=0009 Ze status=0009 14:45:41 Check angles 14:45:41 SkyScan query [UTC 2018-12-17 14:45:42] 14:45:42 SkyScan query done: ret=0 az=81.105<-5407 ze=-88.95<-17930 Statuses=0009 0009 14:45:42 Msec=750 True Az=81.105 Ze=-88.95 Az status=0009 Ze status=0009 14:45:42 Check angles 14:45:42 SkyScan query 14:45:43 SkyScan query done: ret=0 az=98.595<-6573 ze=-109.89<-19326 Statuses=0009 0009 14:45:43 Msec=1500 True Az=98.595 Ze=-109.89 Az status=0009 Ze status=0009 14:45:43 Check angles 14:45:43 SkyScan query 14:45:43 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.295<-20753 Statuses=0009 0009 14:45:43 Msec=2250 True Az=116.55 Ze=-131.295 Az status=0009 Ze status=0009 14:45:44 Check angles 14:45:44 SkyScan query 14:45:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 14:45:44 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 14:45:44 Check angles 14:45:44 SkyScan query 14:45:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:45:45 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:45:45 Message to Master queued w/err=0: serial=224701 error=0 14:45:50 Received message from Master: op=Filter serial=224702 14:45:50 Color wheel filter change from 0 to 0 14:45:50 FLIGetFilterPos err=0 currentPosition=0 14:45:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:50 Filter is already there-color wheel unchanged 14:45:50 Received message from Master: op=Shutter serial=224703 14:45:50 Shutter LASER close 14:45:50 Received message from Camera: op=State serial=224705 14:45:50 GetSingleValue result=40 Value=cccccccc 14:45:50 SkyScan query 14:45:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:45:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:51 Parameters OK 14:45:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:51 Set A/D data flow result=40 14:45:51 Set A/D channel type result=40 14:45:51 Set A/D encoding result=40 14:45:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:51 Set channel filter=0.000000e+000 result=40 14:45:51 Config A/D Result=40 14:45:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:51 Get A/D filter: -9.255963e+061 result=40 14:45:51 Get A/D value=-858993460 result=40 14:45:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:51 Parameters OK 14:45:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:51 Set A/D data flow result=40 14:45:51 Set A/D channel type result=40 14:45:51 Set A/D encoding result=40 14:45:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:51 Set channel filter=0.000000e+000 result=40 14:45:51 Config A/D Result=40 14:45:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:51 Get A/D filter: -9.255963e+061 result=40 14:45:51 Get A/D value=-858993460 result=40 14:45:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:51 Aux= 14:45:51 Message to Camera, serial 224705 queued 14:46:28 Received message from Master: op=PointingHead serial=224718 14:46:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:46:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:46:28 Point started: ret=0 14:46:28 point_skyscan result=0 14:46:29 Check angles 14:46:29 SkyScan query 14:46:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.03<-23402 Statuses=0009 0009 14:46:29 Msec=0 True Az=113.01 Ze=-171.03 Az status=0009 Ze status=0009 14:46:29 Check angles 14:46:29 SkyScan query 14:46:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:46:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:46:30 Message to Master queued w/err=0: serial=224718 error=0 14:46:35 Received message from Master: op=Filter serial=224719 14:46:35 Color wheel filter change from 0 to 0 14:46:35 FLIGetFilterPos err=0 currentPosition=0 14:46:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:35 Filter is already there-color wheel unchanged 14:46:35 Received message from Master: op=Shutter serial=224720 14:46:35 Shutter LASER open 14:46:35 Received message from Camera: op=State serial=224722 14:46:35 GetSingleValue result=40 Value=cccccccc 14:46:35 SkyScan query 14:46:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:46:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:36 Parameters OK 14:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:36 Set A/D data flow result=40 14:46:36 Set A/D channel type result=40 14:46:36 Set A/D encoding result=40 14:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:36 Set channel filter=0.000000e+000 result=40 14:46:36 Config A/D Result=40 14:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:36 Get A/D filter: -9.255963e+061 result=40 14:46:36 Get A/D value=-858993460 result=40 14:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:36 Parameters OK 14:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:36 Set A/D data flow result=40 14:46:36 Set A/D channel type result=40 14:46:36 Set A/D encoding result=40 14:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:36 Set channel filter=0.000000e+000 result=40 14:46:36 Config A/D Result=40 14:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:36 Get A/D filter: -9.255963e+061 result=40 14:46:36 Get A/D value=-858993460 result=40 14:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:36 Aux= 14:46:36 Message to Camera, serial 224722 queued 14:46:44 Received message from Master: op=Shutter serial=224732 14:46:44 Shutter LASER close 14:46:45 Received message from Master: op=PointingHead serial=224736 14:46:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:46:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:46:45 Point started: ret=0 14:46:45 point_skyscan result=0 14:46:46 Check angles 14:46:46 SkyScan query 14:46:47 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.935<-21529 Statuses=0009 0009 14:46:47 Msec=0 True Az=136.155 Ze=-142.935 Az status=0009 Ze status=0009 14:46:47 Check angles 14:46:47 SkyScan query 14:46:47 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.98<-20132 Statuses=0009 0009 14:46:47 Msec=750 True Az=153.75 Ze=-121.98 Az status=0009 Ze status=0009 14:46:48 Check angles 14:46:48 SkyScan query 14:46:48 SkyScan query done: ret=0 az=171.18<-11412 ze=-100.935<-18729 Statuses=0009 0009 14:46:48 Msec=1500 True Az=171.18 Ze=-100.935 Az status=0009 Ze status=0009 14:46:48 Check angles 14:46:48 SkyScan query 14:46:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.1<-17340 Statuses=0008 0009 14:46:49 Msec=2250 True Az=175.995 Ze=-80.1 Az status=0008 Ze status=0009 14:46:49 Check angles 14:46:49 SkyScan query 14:46:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.115<-15941 Statuses=0008 0009 14:46:50 Msec=3000 True Az=175.995 Ze=-59.115 Az status=0008 Ze status=0009 14:46:50 Check angles 14:46:50 SkyScan query 14:46:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:46:50 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:46:50 Message to Master queued w/err=0: serial=224736 error=0 14:46:55 Received message from Master: op=Filter serial=224737 14:46:55 Color wheel filter change from 0 to 0 14:46:55 FLIGetFilterPos err=0 currentPosition=0 14:46:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:55 Filter is already there-color wheel unchanged 14:46:56 Received message from Master: op=Shutter serial=224738 14:46:56 Shutter LASER close 14:46:56 Received message from Camera: op=State serial=224740 14:46:56 GetSingleValue result=40 Value=cccccccc 14:46:56 SkyScan query 14:46:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:46:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:56 Parameters OK 14:46:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:56 Set A/D data flow result=40 14:46:56 Set A/D channel type result=40 14:46:56 Set A/D encoding result=40 14:46:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:56 Set channel filter=0.000000e+000 result=40 14:46:56 Config A/D Result=40 14:46:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:56 Get A/D filter: -9.255963e+061 result=40 14:46:56 Get A/D value=-858993460 result=40 14:46:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:56 Parameters OK 14:46:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:56 Set A/D data flow result=40 14:46:56 Set A/D channel type result=40 14:46:56 Set A/D encoding result=40 14:46:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:56 Set channel filter=0.000000e+000 result=40 14:46:56 Config A/D Result=40 14:46:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:56 Get A/D filter: -9.255963e+061 result=40 14:46:56 Get A/D value=-858993460 result=40 14:46:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:56 Aux= 14:46:56 Message to Camera, serial 224740 queued 14:47:33 Received message from Master: op=PointingHead serial=224753 14:47:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:47:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:47:33 Point started: ret=0 14:47:33 point_skyscan result=0 14:47:34 Check angles 14:47:34 SkyScan query 14:47:35 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.96<-13464 Statuses=0009 0009 14:47:35 Msec=0 True Az=153.165 Ze=-21.96 Az status=0009 Ze status=0009 14:47:35 Check angles 14:47:35 SkyScan query 14:47:36 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.99<-12066 Statuses=0009 0009 14:47:36 Msec=750 True Az=135.75 Ze=-0.99 Az status=0009 Ze status=0009 14:47:36 Check angles 14:47:36 SkyScan query 14:47:36 SkyScan query done: ret=0 az=118.2<-7880 ze=19.98<-10668 Statuses=0009 0009 14:47:36 Msec=1500 True Az=118.2 Ze=19.98 Az status=0009 Ze status=0009 14:47:36 Check angles 14:47:36 SkyScan query 14:47:37 SkyScan query done: ret=0 az=100.77<-6718 ze=40.95<-9270 Statuses=0009 0009 14:47:37 Msec=2250 True Az=100.77 Ze=40.95 Az status=0009 Ze status=0009 14:47:37 Check angles 14:47:37 SkyScan query 14:47:38 SkyScan query done: ret=0 az=85.95<-5730 ze=51.54<-8564 Statuses=0009 0008 14:47:38 Msec=3000 True Az=85.95 Ze=51.54 Az status=0009 Ze status=0008 14:47:38 Check angles 14:47:38 SkyScan query 14:47:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:47:39 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:47:39 Message to Master queued w/err=0: serial=224753 error=0 14:47:44 Received message from Master: op=Filter serial=224754 14:47:44 Color wheel filter change from 0 to 0 14:47:44 FLIGetFilterPos err=0 currentPosition=0 14:47:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:44 Filter is already there-color wheel unchanged 14:47:44 Received message from Master: op=Shutter serial=224755 14:47:44 Shutter LASER close 14:47:44 Received message from Camera: op=State serial=224757 14:47:44 GetSingleValue result=40 Value=cccccccc 14:47:44 SkyScan query 14:47:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:47:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:44 Parameters OK 14:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:44 Set A/D data flow result=40 14:47:44 Set A/D channel type result=40 14:47:44 Set A/D encoding result=40 14:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:44 Set channel filter=0.000000e+000 result=40 14:47:44 Config A/D Result=40 14:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:44 Get A/D filter: -9.255963e+061 result=40 14:47:44 Get A/D value=-858993460 result=40 14:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:44 Parameters OK 14:47:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:44 Set A/D data flow result=40 14:47:44 Set A/D channel type result=40 14:47:44 Set A/D encoding result=40 14:47:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:44 Set channel filter=0.000000e+000 result=40 14:47:44 Config A/D Result=40 14:47:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:44 Get A/D filter: -9.255963e+061 result=40 14:47:44 Get A/D value=-858993460 result=40 14:47:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:44 Aux= 14:47:44 Message to Camera, serial 224757 queued 14:48:21 Received message from Master: op=PointingHead serial=224770 14:48:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:48:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:48:22 Point started: ret=0 14:48:22 point_skyscan result=0 14:48:22 Check angles 14:48:22 SkyScan query 14:48:23 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 14:48:23 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 14:48:23 Check angles 14:48:23 SkyScan query 14:48:24 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 14:48:24 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 14:48:24 Check angles 14:48:24 SkyScan query 14:48:24 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 14:48:24 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 14:48:25 Check angles 14:48:25 SkyScan query 14:48:25 SkyScan query done: ret=0 az=161.55<-10770 ze=38.505<-9433 Statuses=0009 0008 14:48:25 Msec=2250 True Az=161.55 Ze=38.505 Az status=0009 Ze status=0008 14:48:25 Check angles 14:48:25 SkyScan query 14:48:26 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:48:26 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:48:26 Check angles 14:48:26 SkyScan query 14:48:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:48:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:48:27 Message to Master queued w/err=0: serial=224770 error=0 14:48:32 Received message from Master: op=Filter serial=224771 14:48:32 Color wheel filter change from 0 to 0 14:48:32 FLIGetFilterPos err=0 currentPosition=0 14:48:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:32 Filter is already there-color wheel unchanged 14:48:32 Received message from Master: op=Shutter serial=224772 14:48:32 Shutter LASER close 14:48:32 Received message from Camera: op=State serial=224774 14:48:32 GetSingleValue result=40 Value=cccccccc 14:48:32 SkyScan query 14:48:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:48:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:32 Parameters OK 14:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:32 Set A/D data flow result=40 14:48:32 Set A/D channel type result=40 14:48:32 Set A/D encoding result=40 14:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:32 Set channel filter=0.000000e+000 result=40 14:48:32 Config A/D Result=40 14:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:32 Get A/D filter: -9.255963e+061 result=40 14:48:32 Get A/D value=-858993460 result=40 14:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:32 Parameters OK 14:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:32 Set A/D data flow result=40 14:48:32 Set A/D channel type result=40 14:48:32 Set A/D encoding result=40 14:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:32 Set channel filter=0.000000e+000 result=40 14:48:32 Config A/D Result=40 14:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:32 Get A/D filter: -9.255963e+061 result=40 14:48:32 Get A/D value=-858993460 result=40 14:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:32 Aux= 14:48:32 Message to Camera, serial 224774 queued 14:49:09 Received message from Master: op=PointingHead serial=224787 14:49:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:49:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:49:10 Point started: ret=0 14:49:10 point_skyscan result=0 14:49:10 Check angles 14:49:10 SkyScan query 14:49:11 SkyScan query done: ret=0 az=152.955<-10197 ze=8.745<-11417 Statuses=0009 0009 14:49:11 Msec=0 True Az=152.955 Ze=8.745 Az status=0009 Ze status=0009 14:49:11 Check angles 14:49:11 SkyScan query 14:49:12 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.255<-12817 Statuses=0009 0009 14:49:12 Msec=750 True Az=135.6 Ze=-12.255 Az status=0009 Ze status=0009 14:49:12 Check angles 14:49:12 SkyScan query 14:49:12 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.165<-14211 Statuses=0009 0009 14:49:12 Msec=1500 True Az=118.005 Ze=-33.165 Az status=0009 Ze status=0009 14:49:13 Check angles 14:49:13 SkyScan query 14:49:13 SkyScan query done: ret=0 az=100.305<-6687 ze=-51.555<-15437 Statuses=0009 0009 14:49:13 Msec=2250 True Az=100.305 Ze=-51.555 Az status=0009 Ze status=0009 14:49:13 Check angles 14:49:13 SkyScan query 14:49:14 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 14:49:14 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 14:49:14 Check angles 14:49:14 SkyScan query 14:49:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:49:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:49:15 Message to Master queued w/err=0: serial=224787 error=0 14:49:20 Received message from Master: op=Filter serial=224788 14:49:20 Color wheel filter change from 0 to 0 14:49:20 FLIGetFilterPos err=0 currentPosition=0 14:49:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:20 Filter is already there-color wheel unchanged 14:49:20 Received message from Master: op=Shutter serial=224789 14:49:20 Shutter LASER close 14:49:20 Received message from Camera: op=State serial=224791 14:49:20 GetSingleValue result=40 Value=cccccccc 14:49:20 SkyScan query 14:49:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:49:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:21 Parameters OK 14:49:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:21 Set A/D data flow result=40 14:49:21 Set A/D channel type result=40 14:49:21 Set A/D encoding result=40 14:49:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:21 Set channel filter=0.000000e+000 result=40 14:49:21 Config A/D Result=40 14:49:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:21 Get A/D filter: -9.255963e+061 result=40 14:49:21 Get A/D value=-858993460 result=40 14:49:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:21 Parameters OK 14:49:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:21 Set A/D data flow result=40 14:49:21 Set A/D channel type result=40 14:49:21 Set A/D encoding result=40 14:49:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:21 Set channel filter=0.000000e+000 result=40 14:49:21 Config A/D Result=40 14:49:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:21 Get A/D filter: -9.255963e+061 result=40 14:49:21 Get A/D value=-858993460 result=40 14:49:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:21 Aux= 14:49:21 Message to Camera, serial 224791 queued 14:49:56 Received message from Master: op=PointingHead serial=224803 14:49:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:49:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:49:57 Point started: ret=0 14:49:57 point_skyscan result=0 14:49:57 Check angles 14:49:57 SkyScan query 14:49:58 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.195<-17413 Statuses=0009 0009 14:49:58 Msec=0 True Az=108.93 Ze=-81.195 Az status=0009 Ze status=0009 14:49:58 Check angles 14:49:58 SkyScan query 14:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 14:49:59 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 14:49:59 Check angles 14:49:59 SkyScan query 14:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.57<-20238 Statuses=0008 0009 14:50:00 Msec=1500 True Az=112.995 Ze=-123.57 Az status=0008 Ze status=0009 14:50:00 Check angles 14:50:00 SkyScan query 14:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 14:50:00 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 14:50:00 Check angles 14:50:00 SkyScan query 14:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.87<-23058 Statuses=0008 0009 14:50:01 Msec=3000 True Az=112.995 Ze=-165.87 Az status=0008 Ze status=0009 14:50:01 Check angles 14:50:01 SkyScan query 14:50:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:50:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:50:02 Message to Master queued w/err=0: serial=224803 error=0 14:50:07 Received message from Master: op=Filter serial=224804 14:50:07 Color wheel filter change from 0 to 0 14:50:07 FLIGetFilterPos err=0 currentPosition=0 14:50:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:07 Filter is already there-color wheel unchanged 14:50:07 Received message from Master: op=Shutter serial=224805 14:50:07 Shutter LASER open 14:50:07 Received message from Camera: op=State serial=224807 14:50:07 GetSingleValue result=40 Value=cccccccc 14:50:07 SkyScan query 14:50:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:50:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:08 Parameters OK 14:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:08 Set A/D data flow result=40 14:50:08 Set A/D channel type result=40 14:50:08 Set A/D encoding result=40 14:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:08 Set channel filter=0.000000e+000 result=40 14:50:08 Config A/D Result=40 14:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:08 Get A/D filter: -9.255963e+061 result=40 14:50:08 Get A/D value=-858993460 result=40 14:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:08 Parameters OK 14:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:08 Set A/D data flow result=40 14:50:08 Set A/D channel type result=40 14:50:08 Set A/D encoding result=40 14:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:08 Set channel filter=0.000000e+000 result=40 14:50:08 Config A/D Result=40 14:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:08 Get A/D filter: -9.255963e+061 result=40 14:50:08 Get A/D value=-858993460 result=40 14:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:08 Aux= 14:50:08 Message to Camera, serial 224807 queued 14:50:16 Received message from Master: op=Shutter serial=224817 14:50:16 Shutter LASER close 14:50:17 Received message from Master: op=PointingHead serial=224821 14:50:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:50:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:50:17 Point started: ret=0 14:50:17 point_skyscan result=0 14:50:18 Check angles 14:50:18 SkyScan query 14:50:18 SkyScan query done: ret=0 az=89.655<-5977 ze=157.05<-1530 Statuses=0009 0009 14:50:18 Msec=0 True Az=89.655 Ze=157.05 Az status=0009 Ze status=0009 14:50:19 Check angles 14:50:19 SkyScan query 14:50:19 SkyScan query done: ret=0 az=72.285<-4819 ze=136.095<-2927 Statuses=0009 0009 14:50:19 Msec=750 True Az=72.285 Ze=136.095 Az status=0009 Ze status=0009 14:50:19 Check angles 14:50:19 SkyScan query 14:50:20 SkyScan query done: ret=0 az=54.9<-3660 ze=115.14<-4324 Statuses=0009 0009 14:50:20 Msec=1500 True Az=54.9 Ze=115.14 Az status=0009 Ze status=0009 14:50:20 Check angles 14:50:20 SkyScan query 14:50:21 SkyScan query done: ret=0 az=40.995<-2733 ze=94.155<-5723 Statuses=0009 0009 14:50:21 Msec=2250 True Az=40.995 Ze=94.155 Az status=0009 Ze status=0009 14:50:21 Check angles 14:50:21 SkyScan query 14:50:21 SkyScan query done: ret=0 az=40.98<-2732 ze=73.215<-7119 Statuses=0008 0009 14:50:21 Msec=3000 True Az=40.98 Ze=73.215 Az status=0008 Ze status=0009 14:50:22 Check angles 14:50:22 SkyScan query 14:50:22 SkyScan query done: ret=0 az=40.98<-2732 ze=52.725<-8485 Statuses=0008 0009 14:50:22 Msec=3750 True Az=40.98 Ze=52.725 Az status=0008 Ze status=0009 14:50:22 Check angles 14:50:22 SkyScan query 14:50:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:50:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:50:23 Message to Master queued w/err=0: serial=224821 error=0 14:50:28 Received message from Master: op=Filter serial=224822 14:50:28 Color wheel filter change from 0 to 0 14:50:28 FLIGetFilterPos err=0 currentPosition=0 14:50:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:28 Filter is already there-color wheel unchanged 14:50:28 Received message from Master: op=Shutter serial=224823 14:50:28 Shutter LASER close 14:50:28 Received message from Camera: op=State serial=224825 14:50:28 GetSingleValue result=40 Value=cccccccc 14:50:28 SkyScan query 14:50:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:50:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:29 Parameters OK 14:50:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:29 Set A/D data flow result=40 14:50:29 Set A/D channel type result=40 14:50:29 Set A/D encoding result=40 14:50:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:29 Set channel filter=0.000000e+000 result=40 14:50:29 Config A/D Result=40 14:50:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:29 Get A/D filter: -9.255963e+061 result=40 14:50:29 Get A/D value=-858993460 result=40 14:50:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:29 Parameters OK 14:50:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:29 Set A/D data flow result=40 14:50:29 Set A/D channel type result=40 14:50:29 Set A/D encoding result=40 14:50:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:29 Set channel filter=0.000000e+000 result=40 14:50:29 Config A/D Result=40 14:50:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:29 Get A/D filter: -9.255963e+061 result=40 14:50:29 Get A/D value=-858993460 result=40 14:50:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:29 Aux= 14:50:29 Message to Camera, serial 224825 queued 14:51:06 Received message from Master: op=PointingHead serial=224838 14:51:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:51:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:51:06 Point started: ret=0 14:51:06 point_skyscan result=0 14:51:07 Check angles 14:51:07 SkyScan query 14:51:07 SkyScan query done: ret=0 az=63.84<-4256 ze=66.54<-7564 Statuses=0009 0008 14:51:07 Msec=0 True Az=63.84 Ze=66.54 Az status=0009 Ze status=0008 14:51:07 Check angles 14:51:07 SkyScan query 14:51:08 SkyScan query done: ret=0 az=81.12<-5408 ze=66.51<-7566 Statuses=0009 0008 14:51:08 Msec=750 True Az=81.12 Ze=66.51 Az status=0009 Ze status=0008 14:51:08 Check angles 14:51:08 SkyScan query 14:51:09 SkyScan query done: ret=0 az=98.7<-6580 ze=66.495<-7567 Statuses=0009 0008 14:51:09 Msec=1500 True Az=98.7 Ze=66.495 Az status=0009 Ze status=0008 14:51:09 Check angles 14:51:09 SkyScan query 14:51:10 SkyScan query done: ret=0 az=116.28<-7752 ze=66.495<-7567 Statuses=0009 0008 14:51:10 Msec=2250 True Az=116.28 Ze=66.495 Az status=0009 Ze status=0008 14:51:10 Check angles 14:51:10 SkyScan query 14:51:10 SkyScan query done: ret=0 az=133.62<-8908 ze=66.495<-7567 Statuses=0009 0008 14:51:10 Msec=3000 True Az=133.62 Ze=66.495 Az status=0009 Ze status=0008 14:51:10 Check angles 14:51:10 SkyScan query 14:51:11 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 14:51:11 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 14:51:11 Check angles 14:51:11 SkyScan query 14:51:12 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:51:12 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:51:12 Message to Master queued w/err=0: serial=224838 error=0 14:51:17 Received message from Master: op=Filter serial=224839 14:51:17 Color wheel filter change from 0 to 0 14:51:17 FLIGetFilterPos err=0 currentPosition=0 14:51:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:17 Filter is already there-color wheel unchanged 14:51:17 Received message from Master: op=Shutter serial=224840 14:51:17 Shutter LASER close 14:51:17 Received message from Camera: op=State serial=224842 14:51:17 GetSingleValue result=40 Value=cccccccc 14:51:17 SkyScan query 14:51:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:51:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:18 Parameters OK 14:51:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:18 Set A/D data flow result=40 14:51:18 Set A/D channel type result=40 14:51:18 Set A/D encoding result=40 14:51:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:18 Set channel filter=0.000000e+000 result=40 14:51:18 Config A/D Result=40 14:51:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:18 Get A/D filter: -9.255963e+061 result=40 14:51:18 Get A/D value=-858993460 result=40 14:51:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:18 Parameters OK 14:51:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:18 Set A/D data flow result=40 14:51:18 Set A/D channel type result=40 14:51:18 Set A/D encoding result=40 14:51:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:18 Set channel filter=0.000000e+000 result=40 14:51:18 Config A/D Result=40 14:51:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:18 Get A/D filter: -9.255963e+061 result=40 14:51:18 Get A/D value=-858993460 result=40 14:51:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:18 Aux= 14:51:18 Message to Camera, serial 224842 queued 14:51:54 Received message from Master: op=PointingHead serial=224855 14:51:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:51:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:51:55 Point started: ret=0 14:51:55 point_skyscan result=0 14:51:56 Check angles 14:51:56 SkyScan query 14:51:56 SkyScan query done: ret=0 az=134.775<-8985 ze=36.6<-9560 Statuses=0009 0009 14:51:56 Msec=0 True Az=134.775 Ze=36.6 Az status=0009 Ze status=0009 14:51:56 Check angles 14:51:56 SkyScan query 14:51:57 SkyScan query done: ret=0 az=117.255<-7817 ze=15.66<-10956 Statuses=0009 0009 14:51:57 Msec=750 True Az=117.255 Ze=15.66 Az status=0009 Ze status=0009 14:51:57 Check angles 14:51:57 SkyScan query 14:51:58 SkyScan query done: ret=0 az=99.645<-6643 ze=-5.76<-12384 Statuses=0009 0009 14:51:58 Msec=1500 True Az=99.645 Ze=-5.76 Az status=0009 Ze status=0009 14:51:58 Check angles 14:51:58 SkyScan query 14:51:58 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.715<-13781 Statuses=0009 0009 14:51:58 Msec=2250 True Az=82.14 Ze=-26.715 Az status=0009 Ze status=0009 14:51:59 Check angles 14:51:59 SkyScan query 14:51:59 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.58<-14572 Statuses=0009 0008 14:51:59 Msec=3000 True Az=64.5 Ze=-38.58 Az status=0009 Ze status=0008 14:51:59 Check angles 14:51:59 SkyScan query 14:52:00 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.52<-14568 Statuses=0009 0008 14:52:00 Msec=3750 True Az=47.19 Ze=-38.52 Az status=0009 Ze status=0008 14:52:00 Check angles 14:52:00 SkyScan query 14:52:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:52:01 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:52:01 Message to Master queued w/err=0: serial=224855 error=0 14:52:06 Received message from Master: op=Filter serial=224856 14:52:06 Color wheel filter change from 0 to 0 14:52:06 FLIGetFilterPos err=0 currentPosition=0 14:52:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:06 Filter is already there-color wheel unchanged 14:52:06 Received message from Master: op=Shutter serial=224857 14:52:06 Shutter LASER close 14:52:06 Received message from Camera: op=State serial=224859 14:52:06 GetSingleValue result=40 Value=cccccccc 14:52:06 SkyScan query 14:52:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:52:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:06 Parameters OK 14:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:06 Set A/D data flow result=40 14:52:06 Set A/D channel type result=40 14:52:06 Set A/D encoding result=40 14:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:06 Set channel filter=0.000000e+000 result=40 14:52:06 Config A/D Result=40 14:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:06 Get A/D filter: -9.255963e+061 result=40 14:52:06 Get A/D value=-858993460 result=40 14:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:06 Parameters OK 14:52:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:06 Set A/D data flow result=40 14:52:06 Set A/D channel type result=40 14:52:06 Set A/D encoding result=40 14:52:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:06 Set channel filter=0.000000e+000 result=40 14:52:06 Config A/D Result=40 14:52:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:06 Get A/D filter: -9.255963e+061 result=40 14:52:06 Get A/D value=-858993460 result=40 14:52:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:06 Aux= 14:52:06 Message to Camera, serial 224859 queued 14:52:43 Received message from Master: op=PointingHead serial=224872 14:52:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:52:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:52:44 Point started: ret=0 14:52:44 point_skyscan result=0 14:52:44 Check angles 14:52:44 SkyScan query 14:52:45 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.295<-16553 Statuses=0009 0009 14:52:45 Msec=0 True Az=63.93 Ze=-68.295 Az status=0009 Ze status=0009 14:52:45 Check angles 14:52:45 SkyScan query 14:52:46 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.28<-17952 Statuses=0009 0009 14:52:46 Msec=750 True Az=81.375 Ze=-89.28 Az status=0009 Ze status=0009 14:52:46 Check angles 14:52:46 SkyScan query 14:52:46 SkyScan query done: ret=0 az=99.345<-6623 ze=-110.67<-19378 Statuses=0009 0009 14:52:46 Msec=1500 True Az=99.345 Ze=-110.67 Az status=0009 Ze status=0009 14:52:47 Check angles 14:52:47 SkyScan query 14:52:47 SkyScan query done: ret=0 az=117.12<-7808 ze=-132<-20800 Statuses=0009 0009 14:52:47 Msec=2250 True Az=117.12 Ze=-132 Az status=0009 Ze status=0009 14:52:47 Check angles 14:52:47 SkyScan query 14:52:48 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 14:52:48 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 14:52:48 Check angles 14:52:48 SkyScan query 14:52:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:52:49 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:52:49 Message to Master queued w/err=0: serial=224872 error=0 14:52:54 Received message from Master: op=Filter serial=224873 14:52:54 Color wheel filter change from 0 to 0 14:52:54 FLIGetFilterPos err=0 currentPosition=0 14:52:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:54 Filter is already there-color wheel unchanged 14:52:54 Received message from Master: op=Shutter serial=224874 14:52:54 Shutter LASER close 14:52:54 Received message from Camera: op=State serial=224876 14:52:54 GetSingleValue result=40 Value=cccccccc 14:52:54 SkyScan query 14:52:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:52:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:55 Parameters OK 14:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:55 Set A/D data flow result=40 14:52:55 Set A/D channel type result=40 14:52:55 Set A/D encoding result=40 14:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:55 Set channel filter=0.000000e+000 result=40 14:52:55 Config A/D Result=40 14:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:55 Get A/D filter: -9.255963e+061 result=40 14:52:55 Get A/D value=-858993460 result=40 14:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:55 Parameters OK 14:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:55 Set A/D data flow result=40 14:52:55 Set A/D channel type result=40 14:52:55 Set A/D encoding result=40 14:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:55 Set channel filter=0.000000e+000 result=40 14:52:55 Config A/D Result=40 14:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:55 Get A/D filter: -9.255963e+061 result=40 14:52:55 Get A/D value=-858993460 result=40 14:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:55 Aux= 14:52:55 Message to Camera, serial 224876 queued 14:53:31 Received message from Master: op=PointingHead serial=224889 14:53:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:53:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:53:32 Point started: ret=0 14:53:32 point_skyscan result=0 14:53:32 Check angles 14:53:32 SkyScan query 14:53:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 14:53:33 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 14:53:33 Check angles 14:53:33 SkyScan query 14:53:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:53:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:53:34 Message to Master queued w/err=0: serial=224889 error=0 14:53:39 Received message from Master: op=Filter serial=224890 14:53:39 Color wheel filter change from 0 to 0 14:53:39 FLIGetFilterPos err=0 currentPosition=0 14:53:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:39 Filter is already there-color wheel unchanged 14:53:39 Received message from Master: op=Shutter serial=224891 14:53:39 Shutter LASER open 14:53:39 Received message from Camera: op=State serial=224893 14:53:39 GetSingleValue result=40 Value=cccccccc 14:53:39 SkyScan query 14:53:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:53:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:40 Parameters OK 14:53:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:40 Set A/D data flow result=40 14:53:40 Set A/D channel type result=40 14:53:40 Set A/D encoding result=40 14:53:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:40 Set channel filter=0.000000e+000 result=40 14:53:40 Config A/D Result=40 14:53:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:40 Get A/D filter: -9.255963e+061 result=40 14:53:40 Get A/D value=-858993460 result=40 14:53:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:40 Parameters OK 14:53:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:40 Set A/D data flow result=40 14:53:40 Set A/D channel type result=40 14:53:40 Set A/D encoding result=40 14:53:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:40 Set channel filter=0.000000e+000 result=40 14:53:40 Config A/D Result=40 14:53:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:40 Get A/D filter: -9.255963e+061 result=40 14:53:40 Get A/D value=-858993460 result=40 14:53:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:40 Aux= 14:53:40 Message to Camera, serial 224893 queued 14:53:48 Received message from Master: op=Shutter serial=224903 14:53:48 Shutter LASER close 14:53:49 Received message from Master: op=PointingHead serial=224907 14:53:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:53:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:53:49 Point started: ret=0 14:53:49 point_skyscan result=0 14:53:50 Check angles 14:53:50 SkyScan query 14:53:50 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.01<-21534 Statuses=0009 0009 14:53:50 Msec=0 True Az=136.155 Ze=-143.01 Az status=0009 Ze status=0009 14:53:51 Check angles 14:53:51 SkyScan query 14:53:51 SkyScan query done: ret=0 az=154.02<-10268 ze=-121.635<-20109 Statuses=0009 0009 14:53:51 Msec=750 True Az=154.02 Ze=-121.635 Az status=0009 Ze status=0009 14:53:51 Check angles 14:53:51 SkyScan query 14:53:52 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.59<-18706 Statuses=0009 0009 14:53:52 Msec=1500 True Az=171.51 Ze=-100.59 Az status=0009 Ze status=0009 14:53:52 Check angles 14:53:52 SkyScan query 14:53:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 14:53:53 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 14:53:53 Check angles 14:53:53 SkyScan query 14:53:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.275<-15885 Statuses=0008 0009 14:53:53 Msec=3000 True Az=176.01 Ze=-58.275 Az status=0008 Ze status=0009 14:53:54 Check angles 14:53:54 SkyScan query 14:53:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 14:53:54 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 14:53:54 Message to Master queued w/err=0: serial=224907 error=0 14:53:59 Received message from Master: op=Filter serial=224908 14:53:59 Color wheel filter change from 0 to 0 14:53:59 FLIGetFilterPos err=0 currentPosition=0 14:53:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:59 Filter is already there-color wheel unchanged 14:53:59 Received message from Master: op=Shutter serial=224909 14:53:59 Shutter LASER close 14:54:00 Received message from Camera: op=State serial=224911 14:54:00 GetSingleValue result=40 Value=cccccccc 14:54:00 SkyScan query 14:54:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:54:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:00 Parameters OK 14:54:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:00 Set A/D data flow result=40 14:54:00 Set A/D channel type result=40 14:54:00 Set A/D encoding result=40 14:54:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:00 Set channel filter=0.000000e+000 result=40 14:54:00 Config A/D Result=40 14:54:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:00 Get A/D filter: -9.255963e+061 result=40 14:54:00 Get A/D value=-858993460 result=40 14:54:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:00 Parameters OK 14:54:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:00 Set A/D data flow result=40 14:54:00 Set A/D channel type result=40 14:54:00 Set A/D encoding result=40 14:54:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:00 Set channel filter=0.000000e+000 result=40 14:54:00 Config A/D Result=40 14:54:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:00 Get A/D filter: -9.255963e+061 result=40 14:54:00 Get A/D value=-858993460 result=40 14:54:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:00 Aux= 14:54:00 Message to Camera, serial 224911 queued 14:54:37 Received message from Master: op=PointingHead serial=224924 14:54:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:54:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:54:37 Point started: ret=0 14:54:37 point_skyscan result=0 14:54:38 Check angles 14:54:38 SkyScan query 14:54:39 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.825<-13455 Statuses=0009 0009 14:54:39 Msec=0 True Az=152.955 Ze=-21.825 Az status=0009 Ze status=0009 14:54:39 Check angles 14:54:39 SkyScan query 14:54:40 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.435<-12029 Statuses=0009 0009 14:54:40 Msec=750 True Az=135.165 Ze=-0.435 Az status=0009 Ze status=0009 14:54:40 Check angles 14:54:40 SkyScan query 14:54:40 SkyScan query done: ret=0 az=117.765<-7851 ze=20.55<-10630 Statuses=0009 0009 14:54:40 Msec=1500 True Az=117.765 Ze=20.55 Az status=0009 Ze status=0009 14:54:40 Check angles 14:54:40 SkyScan query 14:54:41 SkyScan query done: ret=0 az=100.38<-6692 ze=41.505<-9233 Statuses=0009 0009 14:54:41 Msec=2250 True Az=100.38 Ze=41.505 Az status=0009 Ze status=0009 14:54:41 Check angles 14:54:41 SkyScan query 14:54:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 14:54:42 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 14:54:42 Check angles 14:54:42 SkyScan query 14:54:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:54:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:54:43 Message to Master queued w/err=0: serial=224924 error=0 14:54:48 Received message from Master: op=Filter serial=224925 14:54:48 Color wheel filter change from 0 to 0 14:54:48 FLIGetFilterPos err=0 currentPosition=0 14:54:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:48 Filter is already there-color wheel unchanged 14:54:48 Received message from Master: op=Shutter serial=224926 14:54:48 Shutter LASER close 14:54:48 Received message from Camera: op=State serial=224928 14:54:48 GetSingleValue result=40 Value=cccccccc 14:54:48 SkyScan query 14:54:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:54:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:48 Parameters OK 14:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:48 Set A/D data flow result=40 14:54:48 Set A/D channel type result=40 14:54:48 Set A/D encoding result=40 14:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:48 Set channel filter=0.000000e+000 result=40 14:54:48 Config A/D Result=40 14:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:48 Get A/D filter: -9.255963e+061 result=40 14:54:48 Get A/D value=-858993460 result=40 14:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:48 Parameters OK 14:54:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:48 Set A/D data flow result=40 14:54:48 Set A/D channel type result=40 14:54:48 Set A/D encoding result=40 14:54:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:48 Set channel filter=0.000000e+000 result=40 14:54:48 Config A/D Result=40 14:54:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:48 Get A/D filter: -9.255963e+061 result=40 14:54:48 Get A/D value=-858993460 result=40 14:54:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:48 Aux= 14:54:48 Message to Camera, serial 224928 queued 14:55:25 Received message from Master: op=PointingHead serial=224941 14:55:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:55:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:55:25 Point started: ret=0 14:55:25 point_skyscan result=0 14:55:26 Check angles 14:55:26 SkyScan query 14:55:27 SkyScan query done: ret=0 az=108.72<-7248 ze=38.49<-9434 Statuses=0009 0008 14:55:27 Msec=0 True Az=108.72 Ze=38.49 Az status=0009 Ze status=0008 14:55:27 Check angles 14:55:27 SkyScan query 14:55:28 SkyScan query done: ret=0 az=126.3<-8420 ze=38.505<-9433 Statuses=0009 0008 14:55:28 Msec=750 True Az=126.3 Ze=38.505 Az status=0009 Ze status=0008 14:55:28 Check angles 14:55:28 SkyScan query 14:55:28 SkyScan query done: ret=0 az=143.76<-9584 ze=38.505<-9433 Statuses=0009 0008 14:55:28 Msec=1500 True Az=143.76 Ze=38.505 Az status=0009 Ze status=0008 14:55:28 Check angles 14:55:28 SkyScan query 14:55:29 SkyScan query done: ret=0 az=161.07<-10738 ze=38.505<-9433 Statuses=0009 0008 14:55:29 Msec=2250 True Az=161.07 Ze=38.505 Az status=0009 Ze status=0008 14:55:29 Check angles 14:55:29 SkyScan query 14:55:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:55:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:55:30 Check angles 14:55:30 SkyScan query 14:55:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:55:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:55:31 Message to Master queued w/err=0: serial=224941 error=0 [UTC 2018-12-17 14:55:36] 14:55:36 Received message from Master: op=Filter serial=224942 14:55:36 Color wheel filter change from 0 to 0 14:55:36 FLIGetFilterPos err=0 currentPosition=0 14:55:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:36 Filter is already there-color wheel unchanged 14:55:36 Received message from Master: op=Shutter serial=224943 14:55:36 Shutter LASER close 14:55:36 Received message from Camera: op=State serial=224945 14:55:36 GetSingleValue result=40 Value=cccccccc 14:55:36 SkyScan query 14:55:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:55:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:36 Parameters OK 14:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:36 Set A/D data flow result=40 14:55:36 Set A/D channel type result=40 14:55:36 Set A/D encoding result=40 14:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:36 Set channel filter=0.000000e+000 result=40 14:55:36 Config A/D Result=40 14:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:36 Get A/D filter: -9.255963e+061 result=40 14:55:36 Get A/D value=-858993460 result=40 14:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:36 Parameters OK 14:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:36 Set A/D data flow result=40 14:55:36 Set A/D channel type result=40 14:55:36 Set A/D encoding result=40 14:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:36 Set channel filter=0.000000e+000 result=40 14:55:36 Config A/D Result=40 14:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:36 Get A/D filter: -9.255963e+061 result=40 14:55:36 Get A/D value=-858993460 result=40 14:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:36 Aux= 14:55:36 Message to Camera, serial 224945 queued [UTC 2018-12-17 14:55:52] 14:56:13 Received message from Master: op=PointingHead serial=224958 14:56:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:56:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:56:14 Point started: ret=0 14:56:14 point_skyscan result=0 14:56:14 Check angles 14:56:14 SkyScan query 14:56:15 SkyScan query done: ret=0 az=152.895<-10193 ze=8.61<-11426 Statuses=0009 0009 14:56:15 Msec=0 True Az=152.895 Ze=8.61 Az status=0009 Ze status=0009 14:56:15 Check angles 14:56:15 SkyScan query 14:56:16 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.75<-12850 Statuses=0009 0009 14:56:16 Msec=750 True Az=135.105 Ze=-12.75 Az status=0009 Ze status=0009 14:56:16 Check angles 14:56:16 SkyScan query 14:56:16 SkyScan query done: ret=0 az=117.495<-7833 ze=-33.765<-14251 Statuses=0009 0009 14:56:16 Msec=1500 True Az=117.495 Ze=-33.765 Az status=0009 Ze status=0009 14:56:17 Check angles 14:56:17 SkyScan query 14:56:17 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.555<-15437 Statuses=0009 0009 14:56:17 Msec=2250 True Az=100.245 Ze=-51.555 Az status=0009 Ze status=0009 14:56:17 Check angles 14:56:17 SkyScan query 14:56:18 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 14:56:18 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 14:56:18 Check angles 14:56:18 SkyScan query 14:56:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:56:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:56:19 Message to Master queued w/err=0: serial=224958 error=0 14:56:24 Received message from Master: op=Filter serial=224959 14:56:24 Color wheel filter change from 0 to 0 14:56:24 FLIGetFilterPos err=0 currentPosition=0 14:56:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:24 Filter is already there-color wheel unchanged 14:56:24 Received message from Master: op=Shutter serial=224960 14:56:24 Shutter LASER close 14:56:24 Received message from Camera: op=State serial=224962 14:56:24 GetSingleValue result=40 Value=cccccccc 14:56:24 SkyScan query 14:56:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:56:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:24 Parameters OK 14:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:24 Set A/D data flow result=40 14:56:24 Set A/D channel type result=40 14:56:24 Set A/D encoding result=40 14:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:24 Set channel filter=0.000000e+000 result=40 14:56:24 Config A/D Result=40 14:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:24 Get A/D filter: -9.255963e+061 result=40 14:56:24 Get A/D value=-858993460 result=40 14:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:24 Parameters OK 14:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:24 Set A/D data flow result=40 14:56:24 Set A/D channel type result=40 14:56:24 Set A/D encoding result=40 14:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:24 Set channel filter=0.000000e+000 result=40 14:56:24 Config A/D Result=40 14:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:24 Get A/D filter: -9.255963e+061 result=40 14:56:24 Get A/D value=-858993460 result=40 14:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:24 Aux= 14:56:24 Message to Camera, serial 224962 queued 14:57:01 Received message from Master: op=PointingHead serial=224975 14:57:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:57:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:57:02 Point started: ret=0 14:57:02 point_skyscan result=0 14:57:02 Check angles 14:57:02 SkyScan query 14:57:03 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.48<-17432 Statuses=0009 0009 14:57:03 Msec=0 True Az=109.185 Ze=-81.48 Az status=0009 Ze status=0009 14:57:03 Check angles 14:57:03 SkyScan query 14:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.855<-18857 Statuses=0008 0009 14:57:04 Msec=750 True Az=112.995 Ze=-102.855 Az status=0008 Ze status=0009 14:57:04 Check angles 14:57:04 SkyScan query 14:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.81<-20254 Statuses=0008 0009 14:57:05 Msec=1500 True Az=112.995 Ze=-123.81 Az status=0008 Ze status=0009 14:57:05 Check angles 14:57:05 SkyScan query 14:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 14:57:05 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 14:57:05 Check angles 14:57:05 SkyScan query 14:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.69<-23046 Statuses=0008 0009 14:57:06 Msec=3000 True Az=112.995 Ze=-165.69 Az status=0008 Ze status=0009 14:57:06 Check angles 14:57:06 SkyScan query 14:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 14:57:07 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 14:57:07 Message to Master queued w/err=0: serial=224975 error=0 14:57:12 Received message from Master: op=Filter serial=224976 14:57:12 Color wheel filter change from 0 to 0 14:57:12 FLIGetFilterPos err=0 currentPosition=0 14:57:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:12 Filter is already there-color wheel unchanged 14:57:12 Received message from Master: op=Shutter serial=224977 14:57:12 Shutter LASER open 14:57:12 Received message from Camera: op=State serial=224979 14:57:12 GetSingleValue result=40 Value=cccccccc 14:57:12 SkyScan query 14:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:57:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:13 Parameters OK 14:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:13 Set A/D data flow result=40 14:57:13 Set A/D channel type result=40 14:57:13 Set A/D encoding result=40 14:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:13 Set channel filter=0.000000e+000 result=40 14:57:13 Config A/D Result=40 14:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:13 Get A/D filter: -9.255963e+061 result=40 14:57:13 Get A/D value=-858993460 result=40 14:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:13 Parameters OK 14:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:13 Set A/D data flow result=40 14:57:13 Set A/D channel type result=40 14:57:13 Set A/D encoding result=40 14:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:13 Set channel filter=0.000000e+000 result=40 14:57:13 Config A/D Result=40 14:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:13 Get A/D filter: -9.255963e+061 result=40 14:57:13 Get A/D value=-858993460 result=40 14:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:13 Aux= 14:57:13 Message to Camera, serial 224979 queued 14:57:21 Received message from Master: op=Shutter serial=224989 14:57:21 Shutter LASER close 14:57:22 Received message from Master: op=PointingHead serial=224993 14:57:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:57:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:57:22 Point started: ret=0 14:57:22 point_skyscan result=0 14:57:23 Check angles 14:57:23 SkyScan query 14:57:23 SkyScan query done: ret=0 az=90.03<-6002 ze=157.35<-1510 Statuses=0009 0009 14:57:23 Msec=0 True Az=90.03 Ze=157.35 Az status=0009 Ze status=0009 14:57:23 Check angles 14:57:23 SkyScan query 14:57:24 SkyScan query done: ret=0 az=72.585<-4839 ze=136.38<-2908 Statuses=0009 0009 14:57:24 Msec=750 True Az=72.585 Ze=136.38 Az status=0009 Ze status=0009 14:57:24 Check angles 14:57:24 SkyScan query 14:57:25 SkyScan query done: ret=0 az=55.23<-3682 ze=115.455<-4303 Statuses=0009 0009 14:57:25 Msec=1500 True Az=55.23 Ze=115.455 Az status=0009 Ze status=0009 14:57:25 Check angles 14:57:25 SkyScan query 14:57:26 SkyScan query done: ret=0 az=40.95<-2730 ze=94.47<-5702 Statuses=0009 0009 14:57:26 Msec=2250 True Az=40.95 Ze=94.47 Az status=0009 Ze status=0009 14:57:26 Check angles 14:57:26 SkyScan query 14:57:26 SkyScan query done: ret=0 az=40.98<-2732 ze=73.545<-7097 Statuses=0008 0009 14:57:26 Msec=3000 True Az=40.98 Ze=73.545 Az status=0008 Ze status=0009 14:57:26 Check angles 14:57:26 SkyScan query 14:57:27 SkyScan query done: ret=0 az=40.98<-2732 ze=52.92<-8472 Statuses=0008 0009 14:57:27 Msec=3750 True Az=40.98 Ze=52.92 Az status=0008 Ze status=0009 14:57:27 Check angles 14:57:27 SkyScan query 14:57:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:57:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:57:28 Message to Master queued w/err=0: serial=224993 error=0 14:57:33 Received message from Master: op=Filter serial=224994 14:57:33 Color wheel filter change from 0 to 0 14:57:33 FLIGetFilterPos err=0 currentPosition=0 14:57:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:33 Filter is already there-color wheel unchanged 14:57:33 Received message from Master: op=Shutter serial=224995 14:57:33 Shutter LASER close 14:57:33 Received message from Camera: op=State serial=224997 14:57:33 GetSingleValue result=40 Value=cccccccc 14:57:33 SkyScan query 14:57:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:57:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:34 Parameters OK 14:57:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:34 Set A/D data flow result=40 14:57:34 Set A/D channel type result=40 14:57:34 Set A/D encoding result=40 14:57:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:34 Set channel filter=0.000000e+000 result=40 14:57:34 Config A/D Result=40 14:57:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:34 Get A/D filter: -9.255963e+061 result=40 14:57:34 Get A/D value=-858993460 result=40 14:57:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:34 Parameters OK 14:57:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:34 Set A/D data flow result=40 14:57:34 Set A/D channel type result=40 14:57:34 Set A/D encoding result=40 14:57:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:34 Set channel filter=0.000000e+000 result=40 14:57:34 Config A/D Result=40 14:57:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:34 Get A/D filter: -9.255963e+061 result=40 14:57:34 Get A/D value=-858993460 result=40 14:57:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:34 Aux= 14:57:34 Message to Camera, serial 224997 queued 14:58:10 Received message from Master: op=PointingHead serial=225010 14:58:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:58:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:58:11 Point started: ret=0 14:58:11 point_skyscan result=0 14:58:12 Check angles 14:58:12 SkyScan query 14:58:12 SkyScan query done: ret=0 az=64.47<-4298 ze=66.54<-7564 Statuses=0009 0008 14:58:12 Msec=0 True Az=64.47 Ze=66.54 Az status=0009 Ze status=0008 14:58:12 Check angles 14:58:12 SkyScan query 14:58:13 SkyScan query done: ret=0 az=82.32<-5488 ze=66.51<-7566 Statuses=0009 0008 14:58:13 Msec=750 True Az=82.32 Ze=66.51 Az status=0009 Ze status=0008 14:58:13 Check angles 14:58:13 SkyScan query 14:58:14 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 14:58:14 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 14:58:14 Check angles 14:58:14 SkyScan query 14:58:14 SkyScan query done: ret=0 az=117.315<-7821 ze=66.495<-7567 Statuses=0009 0008 14:58:14 Msec=2250 True Az=117.315 Ze=66.495 Az status=0009 Ze status=0008 14:58:15 Check angles 14:58:15 SkyScan query 14:58:15 SkyScan query done: ret=0 az=134.775<-8985 ze=66.495<-7567 Statuses=0009 0008 14:58:15 Msec=3000 True Az=134.775 Ze=66.495 Az status=0009 Ze status=0008 14:58:15 Check angles 14:58:15 SkyScan query 14:58:16 SkyScan query done: ret=0 az=152.295<-10153 ze=66.495<-7567 Statuses=0009 0008 14:58:16 Msec=3750 True Az=152.295 Ze=66.495 Az status=0009 Ze status=0008 14:58:16 Check angles 14:58:16 SkyScan query 14:58:17 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:58:17 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:58:17 Message to Master queued w/err=0: serial=225010 error=0 14:58:22 Received message from Master: op=Filter serial=225011 14:58:22 Color wheel filter change from 0 to 0 14:58:22 FLIGetFilterPos err=0 currentPosition=0 14:58:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:22 Filter is already there-color wheel unchanged 14:58:22 Received message from Master: op=Shutter serial=225012 14:58:22 Shutter LASER close 14:58:22 Received message from Camera: op=State serial=225014 14:58:22 GetSingleValue result=40 Value=cccccccc 14:58:22 SkyScan query 14:58:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:58:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:23 Parameters OK 14:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:23 Set A/D data flow result=40 14:58:23 Set A/D channel type result=40 14:58:23 Set A/D encoding result=40 14:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:23 Set channel filter=0.000000e+000 result=40 14:58:23 Config A/D Result=40 14:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:23 Get A/D filter: -9.255963e+061 result=40 14:58:23 Get A/D value=-858993460 result=40 14:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:23 Parameters OK 14:58:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:23 Set A/D data flow result=40 14:58:23 Set A/D channel type result=40 14:58:23 Set A/D encoding result=40 14:58:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:23 Set channel filter=0.000000e+000 result=40 14:58:23 Config A/D Result=40 14:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:23 Get A/D filter: -9.255963e+061 result=40 14:58:23 Get A/D value=-858993460 result=40 14:58:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:23 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:23 Aux= 14:58:23 Message to Camera, serial 225014 queued 14:58:59 Received message from Master: op=PointingHead serial=225027 14:58:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:58:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:59:00 Point started: ret=0 14:59:00 point_skyscan result=0 14:59:00 Check angles 14:59:00 SkyScan query 14:59:01 SkyScan query done: ret=0 az=135.045<-9003 ze=36.765<-9549 Statuses=0009 0009 14:59:01 Msec=0 True Az=135.045 Ze=36.765 Az status=0009 Ze status=0009 14:59:01 Check angles 14:59:01 SkyScan query 14:59:02 SkyScan query done: ret=0 az=117.54<-7836 ze=15.825<-10945 Statuses=0009 0009 14:59:02 Msec=750 True Az=117.54 Ze=15.825 Az status=0009 Ze status=0009 14:59:02 Check angles 14:59:02 SkyScan query 14:59:03 SkyScan query done: ret=0 az=100.185<-6679 ze=-5.16<-12344 Statuses=0009 0009 14:59:03 Msec=1500 True Az=100.185 Ze=-5.16 Az status=0009 Ze status=0009 14:59:03 Check angles 14:59:03 SkyScan query 14:59:03 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.1<-13740 Statuses=0009 0009 14:59:03 Msec=2250 True Az=82.65 Ze=-26.1 Az status=0009 Ze status=0009 14:59:03 Check angles 14:59:03 SkyScan query 14:59:04 SkyScan query done: ret=0 az=65.1<-4340 ze=-38.58<-14572 Statuses=0009 0008 14:59:04 Msec=3000 True Az=65.1 Ze=-38.58 Az status=0009 Ze status=0008 14:59:04 Check angles 14:59:04 SkyScan query 14:59:05 SkyScan query done: ret=0 az=47.685<-3179 ze=-38.52<-14568 Statuses=0009 0008 14:59:05 Msec=3750 True Az=47.685 Ze=-38.52 Az status=0009 Ze status=0008 14:59:05 Check angles 14:59:05 SkyScan query 14:59:06 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 14:59:06 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 14:59:06 Message to Master queued w/err=0: serial=225027 error=0 14:59:11 Received message from Master: op=Filter serial=225028 14:59:11 Color wheel filter change from 0 to 0 14:59:11 FLIGetFilterPos err=0 currentPosition=0 14:59:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:11 Filter is already there-color wheel unchanged 14:59:11 Received message from Master: op=Shutter serial=225029 14:59:11 Shutter LASER close 14:59:11 Received message from Camera: op=State serial=225031 14:59:11 GetSingleValue result=40 Value=cccccccc 14:59:11 SkyScan query 14:59:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:59:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:11 Parameters OK 14:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:11 Set A/D data flow result=40 14:59:11 Set A/D channel type result=40 14:59:11 Set A/D encoding result=40 14:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:11 Set channel filter=0.000000e+000 result=40 14:59:11 Config A/D Result=40 14:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:11 Get A/D filter: -9.255963e+061 result=40 14:59:11 Get A/D value=-858993460 result=40 14:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:11 Parameters OK 14:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:11 Set A/D data flow result=40 14:59:11 Set A/D channel type result=40 14:59:11 Set A/D encoding result=40 14:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:11 Set channel filter=0.000000e+000 result=40 14:59:11 Config A/D Result=40 14:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:11 Get A/D filter: -9.255963e+061 result=40 14:59:11 Get A/D value=-858993460 result=40 14:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:11 Aux= 14:59:11 Message to Camera, serial 225031 queued 14:59:47 Received message from Master: op=PointingHead serial=225043 14:59:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:59:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:59:48 Point started: ret=0 14:59:48 point_skyscan result=0 14:59:48 Check angles 14:59:48 SkyScan query 14:59:49 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.175<-16545 Statuses=0009 0009 14:59:49 Msec=0 True Az=63.87 Ze=-68.175 Az status=0009 Ze status=0009 14:59:49 Check angles 14:59:49 SkyScan query 14:59:50 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.145<-17943 Statuses=0009 0009 14:59:50 Msec=750 True Az=81.3 Ze=-89.145 Az status=0009 Ze status=0009 14:59:50 Check angles 14:59:50 SkyScan query 14:59:50 SkyScan query done: ret=0 az=98.88<-6592 ze=-110.085<-19339 Statuses=0009 0009 14:59:50 Msec=1500 True Az=98.88 Ze=-110.085 Az status=0009 Ze status=0009 14:59:51 Check angles 14:59:51 SkyScan query 14:59:51 SkyScan query done: ret=0 az=116.34<-7756 ze=-131.115<-20741 Statuses=0009 0009 14:59:51 Msec=2250 True Az=116.34 Ze=-131.115 Az status=0009 Ze status=0009 14:59:51 Check angles 14:59:51 SkyScan query 14:59:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 14:59:52 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 14:59:52 Check angles 14:59:52 SkyScan query 14:59:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 14:59:53 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 14:59:53 Message to Master queued w/err=0: serial=225043 error=0 14:59:58 Received message from Master: op=Filter serial=225044 14:59:58 Color wheel filter change from 0 to 0 14:59:58 FLIGetFilterPos err=0 currentPosition=0 14:59:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:58 Filter is already there-color wheel unchanged 14:59:58 Received message from Master: op=Shutter serial=225045 14:59:58 Shutter LASER close 14:59:58 Received message from Camera: op=State serial=225047 14:59:58 GetSingleValue result=40 Value=cccccccc 14:59:58 SkyScan query 14:59:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:59:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:58 Parameters OK 14:59:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:58 Set A/D data flow result=40 14:59:58 Set A/D channel type result=40 14:59:58 Set A/D encoding result=40 14:59:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:58 Set channel filter=0.000000e+000 result=40 14:59:58 Config A/D Result=40 14:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:58 Get A/D filter: -9.255963e+061 result=40 14:59:58 Get A/D value=-858993460 result=40 14:59:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:58 Parameters OK 14:59:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:58 Set A/D data flow result=40 14:59:58 Set A/D channel type result=40 14:59:58 Set A/D encoding result=40 14:59:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:58 Set channel filter=0.000000e+000 result=40 14:59:58 Config A/D Result=40 14:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:58 Get A/D filter: -9.255963e+061 result=40 14:59:58 Get A/D value=-858993460 result=40 14:59:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:58 Aux= 14:59:58 Message to Camera, serial 225047 queued 15:00:35 Received message from Master: op=PointingHead serial=225060 15:00:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:00:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:00:36 Point started: ret=0 15:00:36 point_skyscan result=0 15:00:36 Check angles 15:00:36 SkyScan query 15:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0009 0009 15:00:37 Msec=0 True Az=112.995 Ze=-170.985 Az status=0009 Ze status=0009 15:00:37 Check angles 15:00:37 SkyScan query 15:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:00:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:00:38 Message to Master queued w/err=0: serial=225060 error=0 15:00:43 Received message from Master: op=Filter serial=225061 15:00:43 Color wheel filter change from 0 to 0 15:00:43 FLIGetFilterPos err=0 currentPosition=0 15:00:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:43 Filter is already there-color wheel unchanged 15:00:43 Received message from Master: op=Shutter serial=225062 15:00:43 Shutter LASER open 15:00:43 Received message from Camera: op=State serial=225064 15:00:43 GetSingleValue result=40 Value=cccccccc 15:00:43 SkyScan query 15:00:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:00:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:44 Parameters OK 15:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:44 Set A/D data flow result=40 15:00:44 Set A/D channel type result=40 15:00:44 Set A/D encoding result=40 15:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:44 Set channel filter=0.000000e+000 result=40 15:00:44 Config A/D Result=40 15:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:44 Get A/D filter: -9.255963e+061 result=40 15:00:44 Get A/D value=-858993460 result=40 15:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:44 Parameters OK 15:00:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:44 Set A/D data flow result=40 15:00:44 Set A/D channel type result=40 15:00:44 Set A/D encoding result=40 15:00:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:44 Set channel filter=0.000000e+000 result=40 15:00:44 Config A/D Result=40 15:00:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:44 Get A/D filter: -9.255963e+061 result=40 15:00:44 Get A/D value=-858993460 result=40 15:00:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:44 Aux= 15:00:44 Message to Camera, serial 225064 queued 15:00:52 Received message from Master: op=Shutter serial=225074 15:00:52 Shutter LASER close 15:00:53 Received message from Master: op=PointingHead serial=225078 15:00:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:00:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:00:53 Point started: ret=0 15:00:53 point_skyscan result=0 15:00:54 Check angles 15:00:54 SkyScan query 15:00:54 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.295<-21553 Statuses=0009 0009 15:00:54 Msec=0 True Az=136.155 Ze=-143.295 Az status=0009 Ze status=0009 15:00:55 Check angles 15:00:55 SkyScan query 15:00:55 SkyScan query done: ret=0 az=153.54<-10236 ze=-122.265<-20151 Statuses=0009 0009 15:00:55 Msec=750 True Az=153.54 Ze=-122.265 Az status=0009 Ze status=0009 15:00:55 Check angles 15:00:55 SkyScan query 15:00:56 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.875<-18725 Statuses=0009 0009 15:00:56 Msec=1500 True Az=171.405 Ze=-100.875 Az status=0009 Ze status=0009 15:00:56 Check angles 15:00:56 SkyScan query 15:00:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.47<-17298 Statuses=0008 0009 15:00:57 Msec=2250 True Az=176.01 Ze=-79.47 Az status=0008 Ze status=0009 15:00:57 Check angles 15:00:57 SkyScan query 15:00:57 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.5<-15900 Statuses=0008 0009 15:00:57 Msec=3000 True Az=176.01 Ze=-58.5 Az status=0008 Ze status=0009 15:00:58 Check angles 15:00:58 SkyScan query 15:00:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 15:00:58 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 15:00:58 Message to Master queued w/err=0: serial=225078 error=0 15:01:03 Received message from Master: op=Filter serial=225079 15:01:03 Color wheel filter change from 0 to 0 15:01:03 FLIGetFilterPos err=0 currentPosition=0 15:01:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:03 Filter is already there-color wheel unchanged 15:01:03 Received message from Master: op=Shutter serial=225080 15:01:03 Shutter LASER close 15:01:04 Received message from Camera: op=State serial=225082 15:01:04 GetSingleValue result=40 Value=cccccccc 15:01:04 SkyScan query 15:01:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:01:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:04 Parameters OK 15:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:04 Set A/D data flow result=40 15:01:04 Set A/D channel type result=40 15:01:04 Set A/D encoding result=40 15:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:04 Set channel filter=0.000000e+000 result=40 15:01:04 Config A/D Result=40 15:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:04 Get A/D filter: -9.255963e+061 result=40 15:01:04 Get A/D value=-858993460 result=40 15:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:04 Parameters OK 15:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:04 Set A/D data flow result=40 15:01:04 Set A/D channel type result=40 15:01:04 Set A/D encoding result=40 15:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:04 Set channel filter=0.000000e+000 result=40 15:01:04 Config A/D Result=40 15:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:04 Get A/D filter: -9.255963e+061 result=40 15:01:04 Get A/D value=-858993460 result=40 15:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:04 Aux= 15:01:04 Message to Camera, serial 225082 queued 15:01:41 Received message from Master: op=PointingHead serial=225095 15:01:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:01:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:01:41 Point started: ret=0 15:01:41 point_skyscan result=0 15:01:42 Check angles 15:01:42 SkyScan query 15:01:43 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 15:01:43 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 15:01:43 Check angles 15:01:43 SkyScan query 15:01:43 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.705<-12047 Statuses=0009 0009 15:01:43 Msec=750 True Az=135.435 Ze=-0.705 Az status=0009 Ze status=0009 15:01:44 Check angles 15:01:44 SkyScan query 15:01:44 SkyScan query done: ret=0 az=117.87<-7858 ze=20.22<-10652 Statuses=0009 0009 15:01:44 Msec=1500 True Az=117.87 Ze=20.22 Az status=0009 Ze status=0009 15:01:44 Check angles 15:01:44 SkyScan query 15:01:45 SkyScan query done: ret=0 az=100.515<-6701 ze=41.205<-9253 Statuses=0009 0009 15:01:45 Msec=2250 True Az=100.515 Ze=41.205 Az status=0009 Ze status=0009 15:01:45 Check angles 15:01:45 SkyScan query 15:01:46 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 15:01:46 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 15:01:46 Check angles 15:01:46 SkyScan query 15:01:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:01:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:01:46 Message to Master queued w/err=0: serial=225095 error=0 15:01:51 Received message from Master: op=Filter serial=225096 15:01:51 Color wheel filter change from 0 to 0 15:01:51 FLIGetFilterPos err=0 currentPosition=0 15:01:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:51 Filter is already there-color wheel unchanged 15:01:52 Received message from Master: op=Shutter serial=225097 15:01:52 Shutter LASER close 15:01:52 Received message from Camera: op=State serial=225099 15:01:52 GetSingleValue result=40 Value=cccccccc 15:01:52 SkyScan query 15:01:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:01:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:52 Parameters OK 15:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:52 Set A/D data flow result=40 15:01:52 Set A/D channel type result=40 15:01:52 Set A/D encoding result=40 15:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:52 Set channel filter=0.000000e+000 result=40 15:01:52 Config A/D Result=40 15:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:52 Get A/D filter: -9.255963e+061 result=40 15:01:52 Get A/D value=-858993460 result=40 15:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:52 Parameters OK 15:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:52 Set A/D data flow result=40 15:01:52 Set A/D channel type result=40 15:01:52 Set A/D encoding result=40 15:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:52 Set channel filter=0.000000e+000 result=40 15:01:52 Config A/D Result=40 15:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:52 Get A/D filter: -9.255963e+061 result=40 15:01:52 Get A/D value=-858993460 result=40 15:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:52 Aux= 15:01:52 Message to Camera, serial 225099 queued 15:02:29 Received message from Master: op=PointingHead serial=225112 15:02:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:02:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:02:29 Point started: ret=0 15:02:29 point_skyscan result=0 15:02:30 Check angles 15:02:30 SkyScan query 15:02:31 SkyScan query done: ret=0 az=109.35<-7290 ze=38.49<-9434 Statuses=0009 0008 15:02:31 Msec=0 True Az=109.35 Ze=38.49 Az status=0009 Ze status=0008 15:02:31 Check angles 15:02:31 SkyScan query 15:02:31 SkyScan query done: ret=0 az=127.17<-8478 ze=38.505<-9433 Statuses=0009 0008 15:02:31 Msec=750 True Az=127.17 Ze=38.505 Az status=0009 Ze status=0008 15:02:32 Check angles 15:02:32 SkyScan query 15:02:32 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 15:02:32 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 15:02:32 Check angles 15:02:32 SkyScan query 15:02:33 SkyScan query done: ret=0 az=162.495<-10833 ze=38.505<-9433 Statuses=0009 0008 15:02:33 Msec=2250 True Az=162.495 Ze=38.505 Az status=0009 Ze status=0008 15:02:33 Check angles 15:02:33 SkyScan query 15:02:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:02:34 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:02:34 Check angles 15:02:34 SkyScan query 15:02:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:02:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:02:34 Message to Master queued w/err=0: serial=225112 error=0 15:02:39 Received message from Master: op=Filter serial=225113 15:02:39 Color wheel filter change from 0 to 0 15:02:39 FLIGetFilterPos err=0 currentPosition=0 15:02:39 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:39 Filter is already there-color wheel unchanged 15:02:40 Received message from Master: op=Shutter serial=225114 15:02:40 Shutter LASER close 15:02:40 Received message from Camera: op=State serial=225116 15:02:40 GetSingleValue result=40 Value=cccccccc 15:02:40 SkyScan query 15:02:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:02:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:40 Parameters OK 15:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:40 Set A/D data flow result=40 15:02:40 Set A/D channel type result=40 15:02:40 Set A/D encoding result=40 15:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:40 Set channel filter=0.000000e+000 result=40 15:02:40 Config A/D Result=40 15:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:40 Get A/D filter: -9.255963e+061 result=40 15:02:40 Get A/D value=-858993460 result=40 15:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:40 Parameters OK 15:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:40 Set A/D data flow result=40 15:02:40 Set A/D channel type result=40 15:02:40 Set A/D encoding result=40 15:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:40 Set channel filter=0.000000e+000 result=40 15:02:40 Config A/D Result=40 15:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:40 Get A/D filter: -9.255963e+061 result=40 15:02:40 Get A/D value=-858993460 result=40 15:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:40 Aux= 15:02:40 Message to Camera, serial 225116 queued 15:03:17 Received message from Master: op=PointingHead serial=225129 15:03:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:03:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:03:17 Point started: ret=0 15:03:17 point_skyscan result=0 15:03:18 Check angles 15:03:18 SkyScan query 15:03:19 SkyScan query done: ret=0 az=153.225<-10215 ze=9<-11400 Statuses=0009 0009 15:03:19 Msec=0 True Az=153.225 Ze=9 Az status=0009 Ze status=0009 15:03:19 Check angles 15:03:19 SkyScan query 15:03:20 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.39<-12826 Statuses=0009 0009 15:03:20 Msec=750 True Az=135.42 Ze=-12.39 Az status=0009 Ze status=0009 15:03:20 Check angles 15:03:20 SkyScan query 15:03:20 SkyScan query done: ret=0 az=117.885<-7859 ze=-33.36<-14224 Statuses=0009 0009 15:03:20 Msec=1500 True Az=117.885 Ze=-33.36 Az status=0009 Ze status=0009 15:03:20 Check angles 15:03:20 SkyScan query 15:03:21 SkyScan query done: ret=0 az=100.545<-6703 ze=-51.555<-15437 Statuses=0009 0009 15:03:21 Msec=2250 True Az=100.545 Ze=-51.555 Az status=0009 Ze status=0009 15:03:21 Check angles 15:03:21 SkyScan query 15:03:22 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:03:22 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:03:22 Check angles 15:03:22 SkyScan query 15:03:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:03:23 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:03:23 Message to Master queued w/err=0: serial=225129 error=0 15:03:28 Received message from Master: op=Filter serial=225130 15:03:28 Color wheel filter change from 0 to 0 15:03:28 FLIGetFilterPos err=0 currentPosition=0 15:03:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:28 Filter is already there-color wheel unchanged 15:03:28 Received message from Master: op=Shutter serial=225131 15:03:28 Shutter LASER close 15:03:28 Received message from Camera: op=State serial=225133 15:03:28 GetSingleValue result=40 Value=cccccccc 15:03:28 SkyScan query 15:03:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:03:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:28 Parameters OK 15:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:28 Set A/D data flow result=40 15:03:28 Set A/D channel type result=40 15:03:28 Set A/D encoding result=40 15:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:28 Set channel filter=0.000000e+000 result=40 15:03:28 Config A/D Result=40 15:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:28 Get A/D filter: -9.255963e+061 result=40 15:03:28 Get A/D value=-858993460 result=40 15:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:28 Parameters OK 15:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:28 Set A/D data flow result=40 15:03:28 Set A/D channel type result=40 15:03:28 Set A/D encoding result=40 15:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:28 Set channel filter=0.000000e+000 result=40 15:03:28 Config A/D Result=40 15:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:28 Get A/D filter: -9.255963e+061 result=40 15:03:28 Get A/D value=-858993460 result=40 15:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:28 Aux= 15:03:28 Message to Camera, serial 225133 queued 15:04:05 Received message from Master: op=PointingHead serial=225146 15:04:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:04:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:04:06 Point started: ret=0 15:04:06 point_skyscan result=0 15:04:06 Check angles 15:04:06 SkyScan query 15:04:07 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.45<-17430 Statuses=0009 0009 15:04:07 Msec=0 True Az=109.155 Ze=-81.45 Az status=0009 Ze status=0009 15:04:07 Check angles 15:04:07 SkyScan query 15:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 15:04:08 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 15:04:08 Check angles 15:04:08 SkyScan query 15:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 15:04:08 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 15:04:09 Check angles 15:04:09 SkyScan query 15:04:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.3<-21620 Statuses=0008 0009 15:04:09 Msec=2250 True Az=112.995 Ze=-144.3 Az status=0008 Ze status=0009 15:04:09 Check angles 15:04:09 SkyScan query 15:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.255<-23017 Statuses=0008 0009 15:04:10 Msec=3000 True Az=112.995 Ze=-165.255 Az status=0008 Ze status=0009 15:04:10 Check angles 15:04:10 SkyScan query 15:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:04:11 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:04:11 Message to Master queued w/err=0: serial=225146 error=0 15:04:16 Received message from Master: op=Filter serial=225147 15:04:16 Color wheel filter change from 0 to 0 15:04:16 FLIGetFilterPos err=0 currentPosition=0 15:04:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:16 Filter is already there-color wheel unchanged 15:04:16 Received message from Master: op=Shutter serial=225148 15:04:16 Shutter LASER open 15:04:16 Received message from Camera: op=State serial=225150 15:04:16 GetSingleValue result=40 Value=cccccccc 15:04:16 SkyScan query 15:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:04:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:17 Parameters OK 15:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:17 Set A/D data flow result=40 15:04:17 Set A/D channel type result=40 15:04:17 Set A/D encoding result=40 15:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:17 Set channel filter=0.000000e+000 result=40 15:04:17 Config A/D Result=40 15:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:17 Get A/D filter: -9.255963e+061 result=40 15:04:17 Get A/D value=-858993460 result=40 15:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:17 Parameters OK 15:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:17 Set A/D data flow result=40 15:04:17 Set A/D channel type result=40 15:04:17 Set A/D encoding result=40 15:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:17 Set channel filter=0.000000e+000 result=40 15:04:17 Config A/D Result=40 15:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:17 Get A/D filter: -9.255963e+061 result=40 15:04:17 Get A/D value=-858993460 result=40 15:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:17 Aux= 15:04:17 Message to Camera, serial 225150 queued 15:04:25 Received message from Master: op=Shutter serial=225160 15:04:25 Shutter LASER close 15:04:25 Received message from Master: op=PointingHead serial=225164 15:04:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:04:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:04:26 Point started: ret=0 15:04:26 point_skyscan result=0 15:04:27 Check angles 15:04:27 SkyScan query 15:04:27 SkyScan query done: ret=0 az=89.88<-5992 ze=157.23<-1518 Statuses=0009 0009 15:04:27 Msec=0 True Az=89.88 Ze=157.23 Az status=0009 Ze status=0009 15:04:27 Check angles 15:04:27 SkyScan query 15:04:28 SkyScan query done: ret=0 az=72.03<-4802 ze=135.855<-2943 Statuses=0009 0009 15:04:28 Msec=750 True Az=72.03 Ze=135.855 Az status=0009 Ze status=0009 15:04:28 Check angles 15:04:28 SkyScan query 15:04:29 SkyScan query done: ret=0 az=54.645<-3643 ze=114.87<-4342 Statuses=0009 0009 15:04:29 Msec=1500 True Az=54.645 Ze=114.87 Az status=0009 Ze status=0009 15:04:29 Check angles 15:04:29 SkyScan query 15:04:29 SkyScan query done: ret=0 az=41.01<-2734 ze=93.525<-5765 Statuses=0009 0009 15:04:29 Msec=2250 True Az=41.01 Ze=93.525 Az status=0009 Ze status=0009 15:04:30 Check angles 15:04:30 SkyScan query 15:04:30 SkyScan query done: ret=0 az=40.98<-2732 ze=72.555<-7163 Statuses=0008 0009 15:04:30 Msec=3000 True Az=40.98 Ze=72.555 Az status=0008 Ze status=0009 15:04:30 Check angles 15:04:30 SkyScan query 15:04:31 SkyScan query done: ret=0 az=40.98<-2732 ze=52.32<-8512 Statuses=0008 0009 15:04:31 Msec=3750 True Az=40.98 Ze=52.32 Az status=0008 Ze status=0009 15:04:31 Check angles 15:04:31 SkyScan query 15:04:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:04:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:04:32 Message to Master queued w/err=0: serial=225164 error=0 15:04:37 Received message from Master: op=Filter serial=225165 15:04:37 Color wheel filter change from 0 to 0 15:04:37 FLIGetFilterPos err=0 currentPosition=0 15:04:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:37 Filter is already there-color wheel unchanged 15:04:37 Received message from Master: op=Shutter serial=225166 15:04:37 Shutter LASER close 15:04:37 Received message from Camera: op=State serial=225168 15:04:37 GetSingleValue result=40 Value=cccccccc 15:04:37 SkyScan query 15:04:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:04:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:38 Parameters OK 15:04:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:38 Set A/D data flow result=40 15:04:38 Set A/D channel type result=40 15:04:38 Set A/D encoding result=40 15:04:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:38 Set channel filter=0.000000e+000 result=40 15:04:38 Config A/D Result=40 15:04:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:38 Get A/D filter: -9.255963e+061 result=40 15:04:38 Get A/D value=-858993460 result=40 15:04:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:38 Parameters OK 15:04:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:38 Set A/D data flow result=40 15:04:38 Set A/D channel type result=40 15:04:38 Set A/D encoding result=40 15:04:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:38 Set channel filter=0.000000e+000 result=40 15:04:38 Config A/D Result=40 15:04:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:38 Get A/D filter: -9.255963e+061 result=40 15:04:38 Get A/D value=-858993460 result=40 15:04:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:38 Aux= 15:04:38 Message to Camera, serial 225168 queued 15:05:14 Received message from Master: op=PointingHead serial=225181 15:05:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:05:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:05:15 Point started: ret=0 15:05:15 point_skyscan result=0 15:05:16 Check angles 15:05:16 SkyScan query 15:05:16 SkyScan query done: ret=0 az=63.765<-4251 ze=66.555<-7563 Statuses=0009 0008 15:05:16 Msec=0 True Az=63.765 Ze=66.555 Az status=0009 Ze status=0008 15:05:16 Check angles 15:05:16 SkyScan query 15:05:17 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 15:05:17 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 15:05:17 Check angles 15:05:17 SkyScan query 15:05:18 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 15:05:18 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 15:05:18 Check angles 15:05:18 SkyScan query 15:05:18 SkyScan query done: ret=0 az=116.595<-7773 ze=66.495<-7567 Statuses=0009 0008 15:05:18 Msec=2250 True Az=116.595 Ze=66.495 Az status=0009 Ze status=0008 15:05:19 Check angles 15:05:19 SkyScan query 15:05:19 SkyScan query done: ret=0 az=133.995<-8933 ze=66.495<-7567 Statuses=0009 0008 15:05:19 Msec=3000 True Az=133.995 Ze=66.495 Az status=0009 Ze status=0008 15:05:19 Check angles 15:05:19 SkyScan query 15:05:20 SkyScan query done: ret=0 az=151.44<-10096 ze=66.495<-7567 Statuses=0009 0008 15:05:20 Msec=3750 True Az=151.44 Ze=66.495 Az status=0009 Ze status=0008 15:05:20 Check angles 15:05:20 SkyScan query 15:05:21 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:05:21 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:05:21 Message to Master queued w/err=0: serial=225181 error=0 15:05:26 Received message from Master: op=Filter serial=225182 15:05:26 Color wheel filter change from 0 to 0 15:05:26 FLIGetFilterPos err=0 currentPosition=0 15:05:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:26 Filter is already there-color wheel unchanged 15:05:26 Received message from Master: op=Shutter serial=225183 15:05:26 Shutter LASER close 15:05:26 Received message from Camera: op=State serial=225185 15:05:26 GetSingleValue result=40 Value=cccccccc 15:05:26 SkyScan query 15:05:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:05:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:26 Parameters OK 15:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:26 Set A/D data flow result=40 15:05:26 Set A/D channel type result=40 15:05:26 Set A/D encoding result=40 15:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:26 Set channel filter=0.000000e+000 result=40 15:05:26 Config A/D Result=40 15:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:26 Get A/D filter: -9.255963e+061 result=40 15:05:26 Get A/D value=-858993460 result=40 15:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:26 Parameters OK 15:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:26 Set A/D data flow result=40 15:05:26 Set A/D channel type result=40 15:05:26 Set A/D encoding result=40 15:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:26 Set channel filter=0.000000e+000 result=40 15:05:26 Config A/D Result=40 15:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:26 Get A/D filter: -9.255963e+061 result=40 15:05:26 Get A/D value=-858993460 result=40 [UTC 2018-12-17 15:05:26] 15:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:26 Aux= 15:05:26 Message to Camera, serial 225185 queued 15:06:03 Received message from Master: op=PointingHead serial=225198 15:06:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:06:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:06:04 Point started: ret=0 15:06:04 point_skyscan result=0 15:06:04 Check angles 15:06:04 SkyScan query 15:06:05 SkyScan query done: ret=0 az=135.255<-9017 ze=36.945<-9537 Statuses=0009 0009 15:06:05 Msec=0 True Az=135.255 Ze=36.945 Az status=0009 Ze status=0009 15:06:05 Check angles 15:06:05 SkyScan query 15:06:06 SkyScan query done: ret=0 az=117.33<-7822 ze=15.66<-10956 Statuses=0009 0009 15:06:06 Msec=750 True Az=117.33 Ze=15.66 Az status=0009 Ze status=0009 15:06:06 Check angles 15:06:06 SkyScan query 15:06:06 SkyScan query done: ret=0 az=99.585<-6639 ze=-5.82<-12388 Statuses=0009 0009 15:06:06 Msec=1500 True Az=99.585 Ze=-5.82 Az status=0009 Ze status=0009 15:06:07 Check angles 15:06:07 SkyScan query 15:06:07 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.805<-13787 Statuses=0009 0009 15:06:07 Msec=2250 True Az=82.14 Ze=-26.805 Az status=0009 Ze status=0009 15:06:07 Check angles 15:06:07 SkyScan query 15:06:08 SkyScan query done: ret=0 az=64.185<-4279 ze=-38.58<-14572 Statuses=0009 0008 15:06:08 Msec=3000 True Az=64.185 Ze=-38.58 Az status=0009 Ze status=0008 15:06:08 Check angles 15:06:08 SkyScan query 15:06:09 SkyScan query done: ret=0 az=46.71<-3114 ze=-38.52<-14568 Statuses=0009 0008 15:06:09 Msec=3750 True Az=46.71 Ze=-38.52 Az status=0009 Ze status=0008 15:06:09 Check angles 15:06:09 SkyScan query 15:06:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:06:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:06:09 Message to Master queued w/err=0: serial=225198 error=0 15:06:14 Received message from Master: op=Filter serial=225199 15:06:14 Color wheel filter change from 0 to 0 15:06:14 FLIGetFilterPos err=0 currentPosition=0 15:06:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:14 Filter is already there-color wheel unchanged 15:06:15 Received message from Master: op=Shutter serial=225200 15:06:15 Shutter LASER close 15:06:15 Received message from Camera: op=State serial=225202 15:06:15 GetSingleValue result=40 Value=cccccccc 15:06:15 SkyScan query 15:06:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:06:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:15 Aux= 15:06:15 Message to Camera, serial 225202 queued 15:06:52 Received message from Master: op=PointingHead serial=225215 15:06:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:06:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:06:52 Point started: ret=0 15:06:52 point_skyscan result=0 15:06:53 Check angles 15:06:53 SkyScan query 15:06:54 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.19<-16546 Statuses=0009 0009 15:06:54 Msec=0 True Az=63.915 Ze=-68.19 Az status=0009 Ze status=0009 15:06:54 Check angles 15:06:54 SkyScan query 15:06:55 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.61<-17974 Statuses=0009 0009 15:06:55 Msec=750 True Az=81.66 Ze=-89.61 Az status=0009 Ze status=0009 15:06:55 Check angles 15:06:55 SkyScan query 15:06:55 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.565<-19371 Statuses=0009 0009 15:06:55 Msec=1500 True Az=99.33 Ze=-110.565 Az status=0009 Ze status=0009 15:06:55 Check angles 15:06:55 SkyScan query 15:06:56 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.475<-20765 Statuses=0009 0009 15:06:56 Msec=2250 True Az=116.79 Ze=-131.475 Az status=0009 Ze status=0009 15:06:56 Check angles 15:06:56 SkyScan query 15:06:57 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 15:06:57 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 15:06:57 Check angles 15:06:57 SkyScan query 15:06:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:06:58 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:06:58 Message to Master queued w/err=0: serial=225215 error=0 15:07:03 Received message from Master: op=Filter serial=225216 15:07:03 Color wheel filter change from 0 to 0 15:07:03 FLIGetFilterPos err=0 currentPosition=0 15:07:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:03 Filter is already there-color wheel unchanged 15:07:03 Received message from Master: op=Shutter serial=225217 15:07:03 Shutter LASER close 15:07:03 Received message from Camera: op=State serial=225219 15:07:03 GetSingleValue result=40 Value=cccccccc 15:07:03 SkyScan query 15:07:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:07:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:03 Parameters OK 15:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:03 Set A/D data flow result=40 15:07:03 Set A/D channel type result=40 15:07:03 Set A/D encoding result=40 15:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:03 Set channel filter=0.000000e+000 result=40 15:07:03 Config A/D Result=40 15:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:03 Get A/D filter: -9.255963e+061 result=40 15:07:03 Get A/D value=-858993460 result=40 15:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:03 Parameters OK 15:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:03 Set A/D data flow result=40 15:07:03 Set A/D channel type result=40 15:07:03 Set A/D encoding result=40 15:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:03 Set channel filter=0.000000e+000 result=40 15:07:03 Config A/D Result=40 15:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:03 Get A/D filter: -9.255963e+061 result=40 15:07:03 Get A/D value=-858993460 result=40 15:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:03 Aux= 15:07:03 Message to Camera, serial 225219 queued 15:07:40 Received message from Master: op=PointingHead serial=225232 15:07:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:07:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:07:40 Point started: ret=0 15:07:40 point_skyscan result=0 15:07:41 Check angles 15:07:41 SkyScan query 15:07:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0009 0009 15:07:42 Msec=0 True Az=112.995 Ze=-170.895 Az status=0009 Ze status=0009 15:07:42 Check angles 15:07:42 SkyScan query 15:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:07:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:07:43 Message to Master queued w/err=0: serial=225232 error=0 15:07:48 Received message from Master: op=Filter serial=225233 15:07:48 Color wheel filter change from 0 to 0 15:07:48 FLIGetFilterPos err=0 currentPosition=0 15:07:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:48 Filter is already there-color wheel unchanged 15:07:48 Received message from Master: op=Shutter serial=225234 15:07:48 Shutter LASER open 15:07:48 Received message from Camera: op=State serial=225236 15:07:48 GetSingleValue result=40 Value=cccccccc 15:07:48 SkyScan query 15:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:07:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:48 Parameters OK 15:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:48 Set A/D data flow result=40 15:07:48 Set A/D channel type result=40 15:07:48 Set A/D encoding result=40 15:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:48 Set channel filter=0.000000e+000 result=40 15:07:48 Config A/D Result=40 15:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:48 Get A/D filter: -9.255963e+061 result=40 15:07:48 Get A/D value=-858993460 result=40 15:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:48 Parameters OK 15:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:48 Set A/D data flow result=40 15:07:48 Set A/D channel type result=40 15:07:48 Set A/D encoding result=40 15:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:48 Set channel filter=0.000000e+000 result=40 15:07:48 Config A/D Result=40 15:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:48 Get A/D filter: -9.255963e+061 result=40 15:07:48 Get A/D value=-858993460 result=40 15:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:48 Aux= 15:07:48 Message to Camera, serial 225236 queued 15:07:57 Received message from Master: op=Shutter serial=225246 15:07:57 Shutter LASER close 15:07:57 Received message from Master: op=PointingHead serial=225250 15:07:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:07:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:07:58 Point started: ret=0 15:07:58 point_skyscan result=0 15:07:59 Check angles 15:07:59 SkyScan query 15:07:59 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.725<-21515 Statuses=0009 0009 15:07:59 Msec=0 True Az=136.395 Ze=-142.725 Az status=0009 Ze status=0009 15:07:59 Check angles 15:07:59 SkyScan query 15:08:00 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.755<-20117 Statuses=0009 0009 15:08:00 Msec=750 True Az=153.915 Ze=-121.755 Az status=0009 Ze status=0009 15:08:00 Check angles 15:08:00 SkyScan query 15:08:01 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.725<-18715 Statuses=0009 0009 15:08:01 Msec=1500 True Az=171.36 Ze=-100.725 Az status=0009 Ze status=0009 15:08:01 Check angles 15:08:01 SkyScan query 15:08:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.845<-17323 Statuses=0008 0009 15:08:01 Msec=2250 True Az=176.01 Ze=-79.845 Az status=0008 Ze status=0009 15:08:02 Check angles 15:08:02 SkyScan query 15:08:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.86<-15924 Statuses=0008 0009 15:08:02 Msec=3000 True Az=175.995 Ze=-58.86 Az status=0008 Ze status=0009 15:08:02 Check angles 15:08:02 SkyScan query 15:08:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 15:08:03 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 15:08:03 Message to Master queued w/err=0: serial=225250 error=0 15:08:08 Received message from Master: op=Filter serial=225251 15:08:08 Color wheel filter change from 0 to 0 15:08:08 FLIGetFilterPos err=0 currentPosition=0 15:08:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:08 Filter is already there-color wheel unchanged 15:08:08 Received message from Master: op=Shutter serial=225252 15:08:08 Shutter LASER close 15:08:08 Received message from Camera: op=State serial=225254 15:08:08 GetSingleValue result=40 Value=cccccccc 15:08:08 SkyScan query 15:08:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:08:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:09 Parameters OK 15:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:09 Set A/D data flow result=40 15:08:09 Set A/D channel type result=40 15:08:09 Set A/D encoding result=40 15:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:09 Set channel filter=0.000000e+000 result=40 15:08:09 Config A/D Result=40 15:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:09 Get A/D filter: -9.255963e+061 result=40 15:08:09 Get A/D value=-858993460 result=40 15:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:09 Parameters OK 15:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:09 Set A/D data flow result=40 15:08:09 Set A/D channel type result=40 15:08:09 Set A/D encoding result=40 15:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:09 Set channel filter=0.000000e+000 result=40 15:08:09 Config A/D Result=40 15:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:09 Get A/D filter: -9.255963e+061 result=40 15:08:09 Get A/D value=-858993460 result=40 15:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:09 Aux= 15:08:09 Message to Camera, serial 225254 queued 15:08:46 Received message from Master: op=PointingHead serial=225267 15:08:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:08:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:08:46 Point started: ret=0 15:08:46 point_skyscan result=0 15:08:47 Check angles 15:08:47 SkyScan query 15:08:47 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.765<-13451 Statuses=0009 0009 15:08:47 Msec=0 True Az=152.775 Ze=-21.765 Az status=0009 Ze status=0009 15:08:48 Check angles 15:08:48 SkyScan query 15:08:48 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.75<-12050 Statuses=0009 0009 15:08:48 Msec=750 True Az=135.45 Ze=-0.75 Az status=0009 Ze status=0009 15:08:48 Check angles 15:08:48 SkyScan query 15:08:49 SkyScan query done: ret=0 az=117.555<-7837 ze=20.655<-10623 Statuses=0009 0009 15:08:49 Msec=1500 True Az=117.555 Ze=20.655 Az status=0009 Ze status=0009 15:08:49 Check angles 15:08:49 SkyScan query 15:08:50 SkyScan query done: ret=0 az=99.795<-6653 ze=42<-9200 Statuses=0009 0009 15:08:50 Msec=2250 True Az=99.795 Ze=42 Az status=0009 Ze status=0009 15:08:50 Check angles 15:08:50 SkyScan query 15:08:50 SkyScan query done: ret=0 az=86.025<-5735 ze=51.57<-8562 Statuses=0009 0008 15:08:50 Msec=3000 True Az=86.025 Ze=51.57 Az status=0009 Ze status=0008 15:08:51 Check angles 15:08:51 SkyScan query 15:08:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:08:51 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 15:08:51 Message to Master queued w/err=0: serial=225267 error=0 15:08:56 Received message from Master: op=Filter serial=225268 15:08:56 Color wheel filter change from 0 to 0 15:08:56 FLIGetFilterPos err=0 currentPosition=0 15:08:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:56 Filter is already there-color wheel unchanged 15:08:56 Received message from Master: op=Shutter serial=225269 15:08:56 Shutter LASER close 15:08:56 Received message from Camera: op=State serial=225271 15:08:56 GetSingleValue result=40 Value=cccccccc 15:08:56 SkyScan query 15:08:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:08:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:57 Parameters OK 15:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:57 Set A/D data flow result=40 15:08:57 Set A/D channel type result=40 15:08:57 Set A/D encoding result=40 15:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:57 Set channel filter=0.000000e+000 result=40 15:08:57 Config A/D Result=40 15:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:57 Get A/D filter: -9.255963e+061 result=40 15:08:57 Get A/D value=-858993460 result=40 15:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:57 Parameters OK 15:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:57 Set A/D data flow result=40 15:08:57 Set A/D channel type result=40 15:08:57 Set A/D encoding result=40 15:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:57 Set channel filter=0.000000e+000 result=40 15:08:57 Config A/D Result=40 15:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:57 Get A/D filter: -9.255963e+061 result=40 15:08:57 Get A/D value=-858993460 result=40 15:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:57 Aux= 15:08:57 Message to Camera, serial 225271 queued 15:09:34 Received message from Master: op=PointingHead serial=225284 15:09:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:09:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:09:34 Point started: ret=0 15:09:34 point_skyscan result=0 15:09:35 Check angles 15:09:35 SkyScan query 15:09:36 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 15:09:36 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 15:09:36 Check angles 15:09:36 SkyScan query 15:09:36 SkyScan query done: ret=0 az=126.495<-8433 ze=38.49<-9434 Statuses=0009 0008 15:09:36 Msec=750 True Az=126.495 Ze=38.49 Az status=0009 Ze status=0008 15:09:36 Check angles 15:09:36 SkyScan query 15:09:37 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 15:09:37 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 15:09:37 Check angles 15:09:37 SkyScan query 15:09:38 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 15:09:38 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 15:09:38 Check angles 15:09:38 SkyScan query 15:09:39 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:09:39 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:09:39 Check angles 15:09:39 SkyScan query 15:09:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:09:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:09:39 Message to Master queued w/err=0: serial=225284 error=0 15:09:44 Received message from Master: op=Filter serial=225285 15:09:44 Color wheel filter change from 0 to 0 15:09:44 FLIGetFilterPos err=0 currentPosition=0 15:09:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:44 Filter is already there-color wheel unchanged 15:09:44 Received message from Master: op=Shutter serial=225286 15:09:44 Shutter LASER close 15:09:45 Received message from Camera: op=State serial=225288 15:09:45 GetSingleValue result=40 Value=cccccccc 15:09:45 SkyScan query 15:09:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:09:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:45 Parameters OK 15:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:45 Set A/D data flow result=40 15:09:45 Set A/D channel type result=40 15:09:45 Set A/D encoding result=40 15:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:45 Set channel filter=0.000000e+000 result=40 15:09:45 Config A/D Result=40 15:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:45 Get A/D filter: -9.255963e+061 result=40 15:09:45 Get A/D value=-858993460 result=40 15:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:45 Parameters OK 15:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:45 Set A/D data flow result=40 15:09:45 Set A/D channel type result=40 15:09:45 Set A/D encoding result=40 15:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:45 Set channel filter=0.000000e+000 result=40 15:09:45 Config A/D Result=40 15:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:45 Get A/D filter: -9.255963e+061 result=40 15:09:45 Get A/D value=-858993460 result=40 15:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:45 Aux= 15:09:45 Message to Camera, serial 225288 queued 15:10:22 Received message from Master: op=PointingHead serial=225301 15:10:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:10:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:10:22 Point started: ret=0 15:10:22 point_skyscan result=0 15:10:23 Check angles 15:10:23 SkyScan query 15:10:24 SkyScan query done: ret=0 az=152.745<-10183 ze=8.355<-11443 Statuses=0009 0009 15:10:24 Msec=0 True Az=152.745 Ze=8.355 Az status=0009 Ze status=0009 15:10:24 Check angles 15:10:24 SkyScan query 15:10:24 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.525<-12835 Statuses=0009 0009 15:10:24 Msec=750 True Az=135.315 Ze=-12.525 Az status=0009 Ze status=0009 15:10:25 Check angles 15:10:25 SkyScan query 15:10:25 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.615<-14241 Statuses=0009 0009 15:10:25 Msec=1500 True Az=117.795 Ze=-33.615 Az status=0009 Ze status=0009 15:10:25 Check angles 15:10:25 SkyScan query 15:10:26 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.555<-15437 Statuses=0009 0009 15:10:26 Msec=2250 True Az=100.44 Ze=-51.555 Az status=0009 Ze status=0009 15:10:26 Check angles 15:10:26 SkyScan query 15:10:27 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:10:27 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:10:27 Check angles 15:10:27 SkyScan query 15:10:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:10:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:10:27 Message to Master queued w/err=0: serial=225301 error=0 15:10:32 Received message from Master: op=Filter serial=225302 15:10:32 Color wheel filter change from 0 to 0 15:10:32 FLIGetFilterPos err=0 currentPosition=0 15:10:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:32 Filter is already there-color wheel unchanged 15:10:33 Received message from Master: op=Shutter serial=225303 15:10:33 Shutter LASER close 15:10:33 Received message from Camera: op=State serial=225305 15:10:33 GetSingleValue result=40 Value=cccccccc 15:10:33 SkyScan query 15:10:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:10:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:33 Parameters OK 15:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:33 Set A/D data flow result=40 15:10:33 Set A/D channel type result=40 15:10:33 Set A/D encoding result=40 15:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:33 Set channel filter=0.000000e+000 result=40 15:10:33 Config A/D Result=40 15:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:33 Get A/D filter: -9.255963e+061 result=40 15:10:33 Get A/D value=-858993460 result=40 15:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:33 Parameters OK 15:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:33 Set A/D data flow result=40 15:10:33 Set A/D channel type result=40 15:10:33 Set A/D encoding result=40 15:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:33 Set channel filter=0.000000e+000 result=40 15:10:33 Config A/D Result=40 15:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:33 Get A/D filter: -9.255963e+061 result=40 15:10:33 Get A/D value=-858993460 result=40 15:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:33 Aux= 15:10:33 Message to Camera, serial 225305 queued 15:11:10 Received message from Master: op=PointingHead serial=225318 15:11:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:11:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:11:10 Point started: ret=0 15:11:10 point_skyscan result=0 15:11:11 Check angles 15:11:11 SkyScan query 15:11:12 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.63<-17442 Statuses=0009 0009 15:11:12 Msec=0 True Az=109.35 Ze=-81.63 Az status=0009 Ze status=0009 15:11:12 Check angles 15:11:12 SkyScan query 15:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 15:11:12 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 15:11:13 Check angles 15:11:13 SkyScan query 15:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.525<-20235 Statuses=0008 0009 15:11:13 Msec=1500 True Az=112.995 Ze=-123.525 Az status=0008 Ze status=0009 15:11:13 Check angles 15:11:13 SkyScan query 15:11:14 SkyScan query done: ret=0 az=112.98<-7532 ze=-144.435<-21629 Statuses=0008 0009 15:11:14 Msec=2250 True Az=112.98 Ze=-144.435 Az status=0008 Ze status=0009 15:11:14 Check angles 15:11:14 SkyScan query 15:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 15:11:15 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 15:11:15 Check angles 15:11:15 SkyScan query 15:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:11:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:11:15 Message to Master queued w/err=0: serial=225318 error=0 15:11:20 Received message from Master: op=Filter serial=225319 15:11:20 Color wheel filter change from 0 to 0 15:11:20 FLIGetFilterPos err=0 currentPosition=0 15:11:20 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:20 Filter is already there-color wheel unchanged 15:11:21 Received message from Master: op=Shutter serial=225320 15:11:21 Shutter LASER open 15:11:21 Received message from Camera: op=State serial=225322 15:11:21 GetSingleValue result=40 Value=cccccccc 15:11:21 SkyScan query 15:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:11:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:21 Parameters OK 15:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:21 Set A/D data flow result=40 15:11:21 Set A/D channel type result=40 15:11:21 Set A/D encoding result=40 15:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:21 Set channel filter=0.000000e+000 result=40 15:11:21 Config A/D Result=40 15:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:21 Get A/D filter: -9.255963e+061 result=40 15:11:21 Get A/D value=-858993460 result=40 15:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:21 Parameters OK 15:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:21 Set A/D data flow result=40 15:11:21 Set A/D channel type result=40 15:11:21 Set A/D encoding result=40 15:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:21 Set channel filter=0.000000e+000 result=40 15:11:21 Config A/D Result=40 15:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:21 Get A/D filter: -9.255963e+061 result=40 15:11:21 Get A/D value=-858993460 result=40 15:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:21 Aux= 15:11:21 Message to Camera, serial 225322 queued 15:11:30 Received message from Master: op=Shutter serial=225332 15:11:30 Shutter LASER close 15:11:30 Received message from Master: op=PointingHead serial=225336 15:11:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:11:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:11:31 Point started: ret=0 15:11:31 point_skyscan result=0 15:11:31 Check angles 15:11:31 SkyScan query 15:11:32 SkyScan query done: ret=0 az=89.61<-5974 ze=156.81<-1546 Statuses=0009 0009 15:11:32 Msec=0 True Az=89.61 Ze=156.81 Az status=0009 Ze status=0009 15:11:32 Check angles 15:11:32 SkyScan query 15:11:33 SkyScan query done: ret=0 az=72.075<-4805 ze=135.87<-2942 Statuses=0009 0009 15:11:33 Msec=750 True Az=72.075 Ze=135.87 Az status=0009 Ze status=0009 15:11:33 Check angles 15:11:33 SkyScan query 15:11:33 SkyScan query done: ret=0 az=54.645<-3643 ze=114.885<-4341 Statuses=0009 0009 15:11:33 Msec=1500 True Az=54.645 Ze=114.885 Az status=0009 Ze status=0009 15:11:34 Check angles 15:11:34 SkyScan query 15:11:34 SkyScan query done: ret=0 az=40.995<-2733 ze=93.96<-5736 Statuses=0009 0009 15:11:34 Msec=2250 True Az=40.995 Ze=93.96 Az status=0009 Ze status=0009 15:11:34 Check angles 15:11:34 SkyScan query 15:11:35 SkyScan query done: ret=0 az=40.98<-2732 ze=72.96<-7136 Statuses=0008 0009 15:11:35 Msec=3000 True Az=40.98 Ze=72.96 Az status=0008 Ze status=0009 15:11:35 Check angles 15:11:35 SkyScan query 15:11:36 SkyScan query done: ret=0 az=40.98<-2732 ze=52.575<-8495 Statuses=0008 0009 15:11:36 Msec=3750 True Az=40.98 Ze=52.575 Az status=0008 Ze status=0009 15:11:36 Check angles 15:11:36 SkyScan query 15:11:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:11:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:11:36 Message to Master queued w/err=0: serial=225336 error=0 15:11:41 Received message from Master: op=Filter serial=225337 15:11:41 Color wheel filter change from 0 to 0 15:11:41 FLIGetFilterPos err=0 currentPosition=0 15:11:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:41 Filter is already there-color wheel unchanged 15:11:42 Received message from Master: op=Shutter serial=225338 15:11:42 Shutter LASER close 15:11:42 Received message from Camera: op=State serial=225340 15:11:42 GetSingleValue result=40 Value=cccccccc 15:11:42 SkyScan query 15:11:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:11:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:42 Parameters OK 15:11:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:42 Set A/D data flow result=40 15:11:42 Set A/D channel type result=40 15:11:42 Set A/D encoding result=40 15:11:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:42 Set channel filter=0.000000e+000 result=40 15:11:42 Config A/D Result=40 15:11:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:42 Get A/D filter: -9.255963e+061 result=40 15:11:42 Get A/D value=-858993460 result=40 15:11:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:42 Parameters OK 15:11:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:42 Set A/D data flow result=40 15:11:42 Set A/D channel type result=40 15:11:42 Set A/D encoding result=40 15:11:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:42 Set channel filter=0.000000e+000 result=40 15:11:42 Config A/D Result=40 15:11:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:42 Get A/D filter: -9.255963e+061 result=40 15:11:42 Get A/D value=-858993460 result=40 15:11:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:42 Aux= 15:11:42 Message to Camera, serial 225340 queued 15:12:19 Received message from Master: op=PointingHead serial=225353 15:12:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:12:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:12:20 Point started: ret=0 15:12:20 point_skyscan result=0 15:12:20 Check angles 15:12:20 SkyScan query 15:12:21 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 15:12:21 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 15:12:21 Check angles 15:12:21 SkyScan query 15:12:22 SkyScan query done: ret=0 az=82.14<-5476 ze=66.495<-7567 Statuses=0009 0008 15:12:22 Msec=750 True Az=82.14 Ze=66.495 Az status=0009 Ze status=0008 15:12:22 Check angles 15:12:22 SkyScan query 15:12:22 SkyScan query done: ret=0 az=99.93<-6662 ze=66.495<-7567 Statuses=0009 0008 15:12:22 Msec=1500 True Az=99.93 Ze=66.495 Az status=0009 Ze status=0008 15:12:23 Check angles 15:12:23 SkyScan query 15:12:23 SkyScan query done: ret=0 az=117.33<-7822 ze=66.495<-7567 Statuses=0009 0008 15:12:23 Msec=2250 True Az=117.33 Ze=66.495 Az status=0009 Ze status=0008 15:12:23 Check angles 15:12:23 SkyScan query 15:12:24 SkyScan query done: ret=0 az=134.775<-8985 ze=66.495<-7567 Statuses=0009 0008 15:12:24 Msec=3000 True Az=134.775 Ze=66.495 Az status=0009 Ze status=0008 15:12:24 Check angles 15:12:24 SkyScan query 15:12:25 SkyScan query done: ret=0 az=152.205<-10147 ze=66.495<-7567 Statuses=0009 0008 15:12:25 Msec=3750 True Az=152.205 Ze=66.495 Az status=0009 Ze status=0008 15:12:25 Check angles 15:12:25 SkyScan query 15:12:25 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:12:25 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:12:25 Message to Master queued w/err=0: serial=225353 error=0 15:12:30 Received message from Master: op=Filter serial=225354 15:12:30 Color wheel filter change from 0 to 0 15:12:30 FLIGetFilterPos err=0 currentPosition=0 15:12:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:30 Filter is already there-color wheel unchanged 15:12:31 Received message from Master: op=Shutter serial=225355 15:12:31 Shutter LASER close 15:12:31 Received message from Camera: op=State serial=225357 15:12:31 GetSingleValue result=40 Value=cccccccc 15:12:31 SkyScan query 15:12:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:12:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:31 Parameters OK 15:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:31 Set A/D data flow result=40 15:12:31 Set A/D channel type result=40 15:12:31 Set A/D encoding result=40 15:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:31 Set channel filter=0.000000e+000 result=40 15:12:31 Config A/D Result=40 15:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:31 Get A/D filter: -9.255963e+061 result=40 15:12:31 Get A/D value=-858993460 result=40 15:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:31 Parameters OK 15:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:31 Set A/D data flow result=40 15:12:31 Set A/D channel type result=40 15:12:31 Set A/D encoding result=40 15:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:31 Set channel filter=0.000000e+000 result=40 15:12:31 Config A/D Result=40 15:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:31 Get A/D filter: -9.255963e+061 result=40 15:12:31 Get A/D value=-858993460 result=40 15:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:31 Aux= 15:12:31 Message to Camera, serial 225357 queued 15:13:08 Received message from Master: op=PointingHead serial=225370 15:13:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:13:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:13:08 Point started: ret=0 15:13:08 point_skyscan result=0 15:13:09 Check angles 15:13:09 SkyScan query 15:13:10 SkyScan query done: ret=0 az=135.075<-9005 ze=36.84<-9544 Statuses=0009 0009 15:13:10 Msec=0 True Az=135.075 Ze=36.84 Az status=0009 Ze status=0009 15:13:10 Check angles 15:13:10 SkyScan query 15:13:11 SkyScan query done: ret=0 az=117.645<-7843 ze=15.885<-10941 Statuses=0009 0009 15:13:11 Msec=750 True Az=117.645 Ze=15.885 Az status=0009 Ze status=0009 15:13:11 Check angles 15:13:11 SkyScan query 15:13:11 SkyScan query done: ret=0 az=100.275<-6685 ze=-5.055<-12337 Statuses=0009 0009 15:13:11 Msec=1500 True Az=100.275 Ze=-5.055 Az status=0009 Ze status=0009 15:13:11 Check angles 15:13:11 SkyScan query 15:13:12 SkyScan query done: ret=0 az=82.725<-5515 ze=-26.025<-13735 Statuses=0009 0009 15:13:12 Msec=2250 True Az=82.725 Ze=-26.025 Az status=0009 Ze status=0009 15:13:12 Check angles 15:13:12 SkyScan query 15:13:13 SkyScan query done: ret=0 az=65.25<-4350 ze=-38.565<-14571 Statuses=0009 0008 15:13:13 Msec=3000 True Az=65.25 Ze=-38.565 Az status=0009 Ze status=0008 15:13:13 Check angles 15:13:13 SkyScan query 15:13:14 SkyScan query done: ret=0 az=47.805<-3187 ze=-38.535<-14569 Statuses=0009 0008 15:13:14 Msec=3750 True Az=47.805 Ze=-38.535 Az status=0009 Ze status=0008 15:13:14 Check angles 15:13:14 SkyScan query 15:13:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:13:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:13:14 Message to Master queued w/err=0: serial=225370 error=0 15:13:19 Received message from Master: op=Filter serial=225371 15:13:19 Color wheel filter change from 0 to 0 15:13:19 FLIGetFilterPos err=0 currentPosition=0 15:13:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:19 Filter is already there-color wheel unchanged 15:13:19 Received message from Master: op=Shutter serial=225372 15:13:19 Shutter LASER close 15:13:19 Received message from Camera: op=State serial=225374 15:13:19 GetSingleValue result=40 Value=cccccccc 15:13:19 SkyScan query 15:13:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:13:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:20 Parameters OK 15:13:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:20 Set A/D data flow result=40 15:13:20 Set A/D channel type result=40 15:13:20 Set A/D encoding result=40 15:13:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:20 Set channel filter=0.000000e+000 result=40 15:13:20 Config A/D Result=40 15:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:20 Get A/D filter: -9.255963e+061 result=40 15:13:20 Get A/D value=-858993460 result=40 15:13:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:20 Parameters OK 15:13:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:20 Set A/D data flow result=40 15:13:20 Set A/D channel type result=40 15:13:20 Set A/D encoding result=40 15:13:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:20 Set channel filter=0.000000e+000 result=40 15:13:20 Config A/D Result=40 15:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:20 Get A/D filter: -9.255963e+061 result=40 15:13:20 Get A/D value=-858993460 result=40 15:13:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:20 Aux= 15:13:20 Message to Camera, serial 225374 queued 15:13:56 Received message from Master: op=PointingHead serial=225386 15:13:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:13:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:13:56 Point started: ret=0 15:13:56 point_skyscan result=0 15:13:57 Check angles 15:13:57 SkyScan query 15:13:58 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.58<-16572 Statuses=0009 0009 15:13:58 Msec=0 True Az=64.17 Ze=-68.58 Az status=0009 Ze status=0009 15:13:58 Check angles 15:13:58 SkyScan query 15:13:58 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.535<-17969 Statuses=0009 0009 15:13:58 Msec=750 True Az=81.63 Ze=-89.535 Az status=0009 Ze status=0009 15:13:59 Check angles 15:13:59 SkyScan query 15:13:59 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.595<-19373 Statuses=0009 0009 15:13:59 Msec=1500 True Az=99.09 Ze=-110.595 Az status=0009 Ze status=0009 15:13:59 Check angles 15:13:59 SkyScan query 15:14:00 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.385<-20759 Statuses=0009 0009 15:14:00 Msec=2250 True Az=116.55 Ze=-131.385 Az status=0009 Ze status=0009 15:14:00 Check angles 15:14:00 SkyScan query 15:14:01 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 15:14:01 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 15:14:01 Check angles 15:14:01 SkyScan query 15:14:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:14:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:14:01 Message to Master queued w/err=0: serial=225386 error=0 15:14:06 Received message from Master: op=Filter serial=225387 15:14:06 Color wheel filter change from 0 to 0 15:14:06 FLIGetFilterPos err=0 currentPosition=0 15:14:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:06 Filter is already there-color wheel unchanged 15:14:07 Received message from Master: op=Shutter serial=225388 15:14:07 Shutter LASER close 15:14:07 Received message from Camera: op=State serial=225390 15:14:07 GetSingleValue result=40 Value=cccccccc 15:14:07 SkyScan query 15:14:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:14:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:07 Parameters OK 15:14:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:07 Set A/D data flow result=40 15:14:07 Set A/D channel type result=40 15:14:07 Set A/D encoding result=40 15:14:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:07 Set channel filter=0.000000e+000 result=40 15:14:07 Config A/D Result=40 15:14:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:07 Get A/D filter: -9.255963e+061 result=40 15:14:07 Get A/D value=-858993460 result=40 15:14:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:07 Parameters OK 15:14:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:07 Set A/D data flow result=40 15:14:07 Set A/D channel type result=40 15:14:07 Set A/D encoding result=40 15:14:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:07 Set channel filter=0.000000e+000 result=40 15:14:07 Config A/D Result=40 15:14:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:07 Get A/D filter: -9.255963e+061 result=40 15:14:07 Get A/D value=-858993460 result=40 15:14:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:07 Aux= 15:14:07 Message to Camera, serial 225390 queued 15:14:44 Received message from Master: op=PointingHead serial=225403 15:14:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:14:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:14:44 Point started: ret=0 15:14:44 point_skyscan result=0 15:14:45 Check angles 15:14:45 SkyScan query 15:14:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 15:14:46 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 15:14:46 Check angles 15:14:46 SkyScan query 15:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:14:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:14:46 Message to Master queued w/err=0: serial=225403 error=0 15:14:51 Received message from Master: op=Filter serial=225404 15:14:51 Color wheel filter change from 0 to 0 15:14:51 FLIGetFilterPos err=0 currentPosition=0 15:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:51 Filter is already there-color wheel unchanged 15:14:52 Received message from Master: op=Shutter serial=225405 15:14:52 Shutter LASER open 15:14:52 Received message from Camera: op=State serial=225407 15:14:52 GetSingleValue result=40 Value=cccccccc 15:14:52 SkyScan query 15:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:52 Parameters OK 15:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:52 Set A/D data flow result=40 15:14:52 Set A/D channel type result=40 15:14:52 Set A/D encoding result=40 15:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:52 Set channel filter=0.000000e+000 result=40 15:14:52 Config A/D Result=40 15:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:52 Get A/D filter: -9.255963e+061 result=40 15:14:52 Get A/D value=-858993460 result=40 15:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:52 Parameters OK 15:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:52 Set A/D data flow result=40 15:14:52 Set A/D channel type result=40 15:14:52 Set A/D encoding result=40 15:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:52 Set channel filter=0.000000e+000 result=40 15:14:52 Config A/D Result=40 15:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:52 Get A/D filter: -9.255963e+061 result=40 15:14:52 Get A/D value=-858993460 result=40 15:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:52 Aux= 15:14:52 Message to Camera, serial 225407 queued 15:15:01 Received message from Master: op=Shutter serial=225417 15:15:01 Shutter LASER close 15:15:01 Received message from Master: op=PointingHead serial=225421 15:15:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:15:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:15:02 Point started: ret=0 15:15:02 point_skyscan result=0 15:15:02 Check angles 15:15:02 SkyScan query 15:15:03 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.235<-21549 Statuses=0009 0009 15:15:03 Msec=0 True Az=135.99 Ze=-143.235 Az status=0009 Ze status=0009 15:15:03 Check angles 15:15:03 SkyScan query 15:15:04 SkyScan query done: ret=0 az=153.525<-10235 ze=-122.25<-20150 Statuses=0009 0009 15:15:04 Msec=750 True Az=153.525 Ze=-122.25 Az status=0009 Ze status=0009 15:15:04 Check angles 15:15:04 SkyScan query 15:15:05 SkyScan query done: ret=0 az=171<-11400 ze=-101.325<-18755 Statuses=0009 0009 15:15:05 Msec=1500 True Az=171 Ze=-101.325 Az status=0009 Ze status=0009 15:15:05 Check angles 15:15:05 SkyScan query 15:15:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.34<-17356 Statuses=0008 0009 15:15:05 Msec=2250 True Az=175.995 Ze=-80.34 Az status=0008 Ze status=0009 15:15:05 Check angles 15:15:05 SkyScan query 15:15:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.92<-15928 Statuses=0008 0009 15:15:06 Msec=3000 True Az=175.995 Ze=-58.92 Az status=0008 Ze status=0009 15:15:06 Check angles 15:15:06 SkyScan query 15:15:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:15:07 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:15:07 Message to Master queued w/err=0: serial=225421 error=0 15:15:12 Received message from Master: op=Filter serial=225422 15:15:12 Color wheel filter change from 0 to 0 15:15:12 FLIGetFilterPos err=0 currentPosition=0 15:15:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:12 Filter is already there-color wheel unchanged 15:15:12 Received message from Master: op=Shutter serial=225423 15:15:12 Shutter LASER close 15:15:12 Received message from Camera: op=State serial=225425 15:15:12 GetSingleValue result=40 Value=cccccccc 15:15:12 SkyScan query 15:15:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:15:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:13 Parameters OK 15:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:13 Set A/D data flow result=40 15:15:13 Set A/D channel type result=40 15:15:13 Set A/D encoding result=40 15:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:13 Set channel filter=0.000000e+000 result=40 15:15:13 Config A/D Result=40 15:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:13 Get A/D filter: -9.255963e+061 result=40 15:15:13 Get A/D value=-858993460 result=40 15:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:13 Parameters OK 15:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:13 Set A/D data flow result=40 15:15:13 Set A/D channel type result=40 15:15:13 Set A/D encoding result=40 15:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:13 Set channel filter=0.000000e+000 result=40 15:15:13 Config A/D Result=40 15:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:13 Get A/D filter: -9.255963e+061 result=40 15:15:13 Get A/D value=-858993460 result=40 15:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:13 Aux= 15:15:13 Message to Camera, serial 225425 queued 15:15:27 Received message from Master: op=Identify serial=225426 15:15:50 Received message from Master: op=PointingHead serial=225441 15:15:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:15:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:15:50 Point started: ret=0 15:15:50 point_skyscan result=0 15:15:51 Check angles 15:15:51 SkyScan query 15:15:51 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.375<-13425 Statuses=0009 0009 15:15:51 Msec=0 True Az=152.715 Ze=-21.375 Az status=0009 Ze status=0009 [UTC 2018-12-17 15:15:51] 15:15:51 Check angles 15:15:51 SkyScan query 15:15:52 SkyScan query done: ret=0 az=133.695<-8913 ze=1.335<-11911 Statuses=0009 0009 15:15:52 Msec=750 True Az=133.695 Ze=1.335 Az status=0009 Ze status=0009 15:15:52 Check angles 15:15:52 SkyScan query 15:15:53 SkyScan query done: ret=0 az=117.75<-7850 ze=20.52<-10632 Statuses=0009 0009 15:15:53 Msec=1500 True Az=117.75 Ze=20.52 Az status=0009 Ze status=0009 [UTC 2018-12-17 15:15:53] 15:15:53 Check angles 15:15:53 SkyScan query 15:15:53 SkyScan query done: ret=0 az=100.395<-6693 ze=41.505<-9233 Statuses=0009 0009 15:15:53 Msec=2250 True Az=100.395 Ze=41.505 Az status=0009 Ze status=0009 15:15:54 Check angles 15:15:54 SkyScan query 15:15:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 15:15:54 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 15:15:54 Check angles 15:15:54 SkyScan query 15:15:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:15:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:15:55 Message to Master queued w/err=0: serial=225441 error=0 15:16:00 Received message from Master: op=Filter serial=225442 15:16:00 Color wheel filter change from 0 to 0 15:16:00 FLIGetFilterPos err=0 currentPosition=0 15:16:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:00 Filter is already there-color wheel unchanged 15:16:00 Received message from Master: op=Shutter serial=225443 15:16:00 Shutter LASER close 15:16:00 Received message from Camera: op=State serial=225445 15:16:00 GetSingleValue result=40 Value=cccccccc 15:16:00 SkyScan query 15:16:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:16:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:01 Parameters OK 15:16:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:01 Set A/D data flow result=40 15:16:01 Set A/D channel type result=40 15:16:01 Set A/D encoding result=40 15:16:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:01 Set channel filter=0.000000e+000 result=40 15:16:01 Config A/D Result=40 15:16:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:01 Get A/D filter: -9.255963e+061 result=40 15:16:01 Get A/D value=-858993460 result=40 15:16:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:01 Parameters OK 15:16:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:01 Set A/D data flow result=40 15:16:01 Set A/D channel type result=40 15:16:01 Set A/D encoding result=40 15:16:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:01 Set channel filter=0.000000e+000 result=40 15:16:01 Config A/D Result=40 15:16:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:01 Get A/D filter: -9.255963e+061 result=40 15:16:01 Get A/D value=-858993460 result=40 15:16:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:01 Aux= 15:16:01 Message to Camera, serial 225445 queued 15:16:38 Received message from Master: op=PointingHead serial=225458 15:16:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:16:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:16:38 Point started: ret=0 15:16:38 point_skyscan result=0 15:16:39 Check angles 15:16:39 SkyScan query 15:16:39 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 15:16:39 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 15:16:39 Check angles 15:16:39 SkyScan query 15:16:40 SkyScan query done: ret=0 az=126.3<-8420 ze=38.505<-9433 Statuses=0009 0008 15:16:40 Msec=750 True Az=126.3 Ze=38.505 Az status=0009 Ze status=0008 15:16:40 Check angles 15:16:40 SkyScan query 15:16:41 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 15:16:41 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 15:16:41 Check angles 15:16:41 SkyScan query 15:16:42 SkyScan query done: ret=0 az=161.1<-10740 ze=38.505<-9433 Statuses=0009 0008 15:16:42 Msec=2250 True Az=161.1 Ze=38.505 Az status=0009 Ze status=0008 15:16:42 Check angles 15:16:42 SkyScan query 15:16:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:16:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:16:42 Check angles 15:16:42 SkyScan query 15:16:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:16:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:16:43 Message to Master queued w/err=0: serial=225458 error=0 15:16:48 Received message from Master: op=Filter serial=225459 15:16:48 Color wheel filter change from 0 to 0 15:16:48 FLIGetFilterPos err=0 currentPosition=0 15:16:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:48 Filter is already there-color wheel unchanged 15:16:48 Received message from Master: op=Shutter serial=225460 15:16:48 Shutter LASER close 15:16:48 Received message from Camera: op=State serial=225462 15:16:48 GetSingleValue result=40 Value=cccccccc 15:16:48 SkyScan query 15:16:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:16:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:49 Parameters OK 15:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:49 Set A/D data flow result=40 15:16:49 Set A/D channel type result=40 15:16:49 Set A/D encoding result=40 15:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:49 Set channel filter=0.000000e+000 result=40 15:16:49 Config A/D Result=40 15:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:49 Get A/D filter: -9.255963e+061 result=40 15:16:49 Get A/D value=-858993460 result=40 15:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:49 Parameters OK 15:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:49 Set A/D data flow result=40 15:16:49 Set A/D channel type result=40 15:16:49 Set A/D encoding result=40 15:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:49 Set channel filter=0.000000e+000 result=40 15:16:49 Config A/D Result=40 15:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:49 Get A/D filter: -9.255963e+061 result=40 15:16:49 Get A/D value=-858993460 result=40 15:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:49 Aux= 15:16:49 Message to Camera, serial 225462 queued 15:17:26 Received message from Master: op=PointingHead serial=225475 15:17:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:17:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:17:26 Point started: ret=0 15:17:26 point_skyscan result=0 15:17:27 Check angles 15:17:27 SkyScan query 15:17:27 SkyScan query done: ret=0 az=152.895<-10193 ze=8.505<-11433 Statuses=0009 0009 15:17:27 Msec=0 True Az=152.895 Ze=8.505 Az status=0009 Ze status=0009 15:17:27 Check angles 15:17:27 SkyScan query 15:17:28 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.42<-12828 Statuses=0009 0009 15:17:28 Msec=750 True Az=135.39 Ze=-12.42 Az status=0009 Ze status=0009 15:17:28 Check angles 15:17:28 SkyScan query 15:17:29 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.405<-14227 Statuses=0009 0009 15:17:29 Msec=1500 True Az=117.81 Ze=-33.405 Az status=0009 Ze status=0009 15:17:29 Check angles 15:17:29 SkyScan query 15:17:30 SkyScan query done: ret=0 az=100.53<-6702 ze=-51.54<-15436 Statuses=0009 0009 15:17:30 Msec=2250 True Az=100.53 Ze=-51.54 Az status=0009 Ze status=0009 15:17:30 Check angles 15:17:30 SkyScan query 15:17:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:17:30 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:17:30 Check angles 15:17:30 SkyScan query 15:17:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:17:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:17:31 Message to Master queued w/err=0: serial=225475 error=0 15:17:36 Received message from Master: op=Filter serial=225476 15:17:36 Color wheel filter change from 0 to 0 15:17:36 FLIGetFilterPos err=0 currentPosition=0 15:17:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:36 Filter is already there-color wheel unchanged 15:17:36 Received message from Master: op=Shutter serial=225477 15:17:36 Shutter LASER close 15:17:36 Received message from Camera: op=State serial=225479 15:17:36 GetSingleValue result=40 Value=cccccccc 15:17:36 SkyScan query 15:17:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:17:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:37 Parameters OK 15:17:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:37 Set A/D data flow result=40 15:17:37 Set A/D channel type result=40 15:17:37 Set A/D encoding result=40 15:17:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:37 Set channel filter=0.000000e+000 result=40 15:17:37 Config A/D Result=40 15:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:37 Get A/D filter: -9.255963e+061 result=40 15:17:37 Get A/D value=-858993460 result=40 15:17:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:37 Parameters OK 15:17:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:37 Set A/D data flow result=40 15:17:37 Set A/D channel type result=40 15:17:37 Set A/D encoding result=40 15:17:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:37 Set channel filter=0.000000e+000 result=40 15:17:37 Config A/D Result=40 15:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:37 Get A/D filter: -9.255963e+061 result=40 15:17:37 Get A/D value=-858993460 result=40 15:17:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:37 Aux= 15:17:37 Message to Camera, serial 225479 queued 15:18:14 Received message from Master: op=PointingHead serial=225492 15:18:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:18:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:18:14 Point started: ret=0 15:18:14 point_skyscan result=0 15:18:15 Check angles 15:18:15 SkyScan query 15:18:15 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.225<-17415 Statuses=0009 0009 15:18:15 Msec=0 True Az=109.14 Ze=-81.225 Az status=0009 Ze status=0009 15:18:16 Check angles 15:18:16 SkyScan query 15:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.18<-18812 Statuses=0008 0009 15:18:16 Msec=750 True Az=112.995 Ze=-102.18 Az status=0008 Ze status=0009 15:18:16 Check angles 15:18:16 SkyScan query 15:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.15<-20210 Statuses=0008 0009 15:18:17 Msec=1500 True Az=112.995 Ze=-123.15 Az status=0008 Ze status=0009 15:18:17 Check angles 15:18:17 SkyScan query 15:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.105<-21607 Statuses=0008 0009 15:18:18 Msec=2250 True Az=112.995 Ze=-144.105 Az status=0008 Ze status=0009 15:18:18 Check angles 15:18:18 SkyScan query 15:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.045<-23003 Statuses=0008 0009 15:18:18 Msec=3000 True Az=112.995 Ze=-165.045 Az status=0008 Ze status=0009 15:18:19 Check angles 15:18:19 SkyScan query 15:18:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:18:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:18:19 Message to Master queued w/err=0: serial=225492 error=0 15:18:24 Received message from Master: op=Filter serial=225493 15:18:24 Color wheel filter change from 0 to 0 15:18:24 FLIGetFilterPos err=0 currentPosition=0 15:18:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:24 Filter is already there-color wheel unchanged 15:18:24 Received message from Master: op=Shutter serial=225494 15:18:24 Shutter LASER open 15:18:25 Received message from Camera: op=State serial=225496 15:18:25 GetSingleValue result=40 Value=cccccccc 15:18:25 SkyScan query 15:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:18:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:25 Parameters OK 15:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:25 Set A/D data flow result=40 15:18:25 Set A/D channel type result=40 15:18:25 Set A/D encoding result=40 15:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:25 Set channel filter=0.000000e+000 result=40 15:18:25 Config A/D Result=40 15:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:25 Get A/D filter: -9.255963e+061 result=40 15:18:25 Get A/D value=-858993460 result=40 15:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:25 Parameters OK 15:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:25 Set A/D data flow result=40 15:18:25 Set A/D channel type result=40 15:18:25 Set A/D encoding result=40 15:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:25 Set channel filter=0.000000e+000 result=40 15:18:25 Config A/D Result=40 15:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:25 Get A/D filter: -9.255963e+061 result=40 15:18:25 Get A/D value=-858993460 result=40 15:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:25 Aux= 15:18:25 Message to Camera, serial 225496 queued 15:18:34 Received message from Master: op=Shutter serial=225506 15:18:34 Shutter LASER close 15:18:34 Received message from Master: op=PointingHead serial=225510 15:18:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:18:34 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:18:34 Point started: ret=0 15:18:34 point_skyscan result=0 15:18:35 Check angles 15:18:35 SkyScan query 15:18:36 SkyScan query done: ret=0 az=89.67<-5978 ze=157.065<-1529 Statuses=0009 0009 15:18:36 Msec=0 True Az=89.67 Ze=157.065 Az status=0009 Ze status=0009 15:18:36 Check angles 15:18:36 SkyScan query 15:18:36 SkyScan query done: ret=0 az=72.285<-4819 ze=136.095<-2927 Statuses=0009 0009 15:18:36 Msec=750 True Az=72.285 Ze=136.095 Az status=0009 Ze status=0009 15:18:37 Check angles 15:18:37 SkyScan query 15:18:37 SkyScan query done: ret=0 az=54.9<-3660 ze=115.155<-4323 Statuses=0009 0009 15:18:37 Msec=1500 True Az=54.9 Ze=115.155 Az status=0009 Ze status=0009 15:18:37 Check angles 15:18:37 SkyScan query 15:18:38 SkyScan query done: ret=0 az=40.995<-2733 ze=94.17<-5722 Statuses=0009 0009 15:18:38 Msec=2250 True Az=40.995 Ze=94.17 Az status=0009 Ze status=0009 15:18:38 Check angles 15:18:38 SkyScan query 15:18:39 SkyScan query done: ret=0 az=40.98<-2732 ze=73.2<-7120 Statuses=0008 0009 15:18:39 Msec=3000 True Az=40.98 Ze=73.2 Az status=0008 Ze status=0009 15:18:39 Check angles 15:18:39 SkyScan query 15:18:39 SkyScan query done: ret=0 az=40.98<-2732 ze=52.725<-8485 Statuses=0008 0009 15:18:39 Msec=3750 True Az=40.98 Ze=52.725 Az status=0008 Ze status=0009 15:18:40 Check angles 15:18:40 SkyScan query 15:18:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:18:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:18:40 Message to Master queued w/err=0: serial=225510 error=0 15:18:45 Received message from Master: op=Filter serial=225511 15:18:45 Color wheel filter change from 0 to 0 15:18:45 FLIGetFilterPos err=0 currentPosition=0 15:18:45 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:45 Filter is already there-color wheel unchanged 15:18:45 Received message from Master: op=Shutter serial=225512 15:18:45 Shutter LASER close 15:18:46 Received message from Camera: op=State serial=225514 15:18:46 GetSingleValue result=40 Value=cccccccc 15:18:46 SkyScan query 15:18:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:18:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:46 Parameters OK 15:18:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:46 Set A/D data flow result=40 15:18:46 Set A/D channel type result=40 15:18:46 Set A/D encoding result=40 15:18:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:46 Set channel filter=0.000000e+000 result=40 15:18:46 Config A/D Result=40 15:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:46 Get A/D filter: -9.255963e+061 result=40 15:18:46 Get A/D value=-858993460 result=40 15:18:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:46 Parameters OK 15:18:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:46 Set A/D data flow result=40 15:18:46 Set A/D channel type result=40 15:18:46 Set A/D encoding result=40 15:18:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:46 Set channel filter=0.000000e+000 result=40 15:18:46 Config A/D Result=40 15:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:46 Get A/D filter: -9.255963e+061 result=40 15:18:46 Get A/D value=-858993460 result=40 15:18:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:46 Aux= 15:18:46 Message to Camera, serial 225514 queued 15:19:23 Received message from Master: op=PointingHead serial=225527 15:19:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:19:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:19:23 Point started: ret=0 15:19:23 point_skyscan result=0 15:19:24 Check angles 15:19:24 SkyScan query 15:19:25 SkyScan query done: ret=0 az=64.23<-4282 ze=66.54<-7564 Statuses=0009 0008 15:19:25 Msec=0 True Az=64.23 Ze=66.54 Az status=0009 Ze status=0008 15:19:25 Check angles 15:19:25 SkyScan query 15:19:25 SkyScan query done: ret=0 az=82.095<-5473 ze=66.495<-7567 Statuses=0009 0008 15:19:25 Msec=750 True Az=82.095 Ze=66.495 Az status=0009 Ze status=0008 15:19:26 Check angles 15:19:26 SkyScan query 15:19:26 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 15:19:26 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 15:19:26 Check angles 15:19:26 SkyScan query 15:19:27 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 15:19:27 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 15:19:27 Check angles 15:19:27 SkyScan query 15:19:28 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 15:19:28 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 15:19:28 Check angles 15:19:28 SkyScan query 15:19:28 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 15:19:28 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 15:19:29 Check angles 15:19:29 SkyScan query 15:19:29 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:19:29 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:19:29 Message to Master queued w/err=0: serial=225527 error=0 15:19:34 Received message from Master: op=Filter serial=225528 15:19:34 Color wheel filter change from 0 to 0 15:19:34 FLIGetFilterPos err=0 currentPosition=0 15:19:34 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:34 Filter is already there-color wheel unchanged 15:19:34 Received message from Master: op=Shutter serial=225529 15:19:34 Shutter LASER close 15:19:34 Received message from Camera: op=State serial=225531 15:19:34 GetSingleValue result=40 Value=cccccccc 15:19:34 SkyScan query 15:19:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:19:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:35 Parameters OK 15:19:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:35 Set A/D data flow result=40 15:19:35 Set A/D channel type result=40 15:19:35 Set A/D encoding result=40 15:19:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:35 Set channel filter=0.000000e+000 result=40 15:19:35 Config A/D Result=40 15:19:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:35 Get A/D filter: -9.255963e+061 result=40 15:19:35 Get A/D value=-858993460 result=40 15:19:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:35 Parameters OK 15:19:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:35 Set A/D data flow result=40 15:19:35 Set A/D channel type result=40 15:19:35 Set A/D encoding result=40 15:19:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:35 Set channel filter=0.000000e+000 result=40 15:19:35 Config A/D Result=40 15:19:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:35 Get A/D filter: -9.255963e+061 result=40 15:19:35 Get A/D value=-858993460 result=40 15:19:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:35 Aux= 15:19:35 Message to Camera, serial 225531 queued 15:20:12 Received message from Master: op=PointingHead serial=225544 15:20:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:20:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:20:12 Point started: ret=0 15:20:12 point_skyscan result=0 15:20:13 Check angles 15:20:13 SkyScan query 15:20:13 SkyScan query done: ret=0 az=135.195<-9013 ze=36.945<-9537 Statuses=0009 0009 15:20:13 Msec=0 True Az=135.195 Ze=36.945 Az status=0009 Ze status=0009 15:20:14 Check angles 15:20:14 SkyScan query 15:20:14 SkyScan query done: ret=0 az=117.345<-7823 ze=15.615<-10959 Statuses=0009 0009 15:20:14 Msec=750 True Az=117.345 Ze=15.615 Az status=0009 Ze status=0009 15:20:14 Check angles 15:20:14 SkyScan query 15:20:15 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.37<-12358 Statuses=0009 0009 15:20:15 Msec=1500 True Az=99.96 Ze=-5.37 Az status=0009 Ze status=0009 15:20:15 Check angles 15:20:15 SkyScan query 15:20:16 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.34<-13756 Statuses=0009 0009 15:20:16 Msec=2250 True Az=82.47 Ze=-26.34 Az status=0009 Ze status=0009 15:20:16 Check angles 15:20:16 SkyScan query 15:20:17 SkyScan query done: ret=0 az=64.95<-4330 ze=-38.58<-14572 Statuses=0009 0008 15:20:17 Msec=3000 True Az=64.95 Ze=-38.58 Az status=0009 Ze status=0008 15:20:17 Check angles 15:20:17 SkyScan query 15:20:17 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.52<-14568 Statuses=0009 0008 15:20:17 Msec=3750 True Az=47.505 Ze=-38.52 Az status=0009 Ze status=0008 15:20:17 Check angles 15:20:17 SkyScan query 15:20:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:20:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:20:18 Message to Master queued w/err=0: serial=225544 error=0 15:20:23 Received message from Master: op=Filter serial=225545 15:20:23 Color wheel filter change from 0 to 0 15:20:23 FLIGetFilterPos err=0 currentPosition=0 15:20:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:23 Filter is already there-color wheel unchanged 15:20:23 Received message from Master: op=Shutter serial=225546 15:20:23 Shutter LASER close 15:20:23 Received message from Camera: op=State serial=225548 15:20:23 GetSingleValue result=40 Value=cccccccc 15:20:23 SkyScan query 15:20:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:20:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:24 Parameters OK 15:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:24 Set A/D data flow result=40 15:20:24 Set A/D channel type result=40 15:20:24 Set A/D encoding result=40 15:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:24 Set channel filter=0.000000e+000 result=40 15:20:24 Config A/D Result=40 15:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:24 Get A/D filter: -9.255963e+061 result=40 15:20:24 Get A/D value=-858993460 result=40 15:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:24 Parameters OK 15:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:24 Set A/D data flow result=40 15:20:24 Set A/D channel type result=40 15:20:24 Set A/D encoding result=40 15:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:24 Set channel filter=0.000000e+000 result=40 15:20:24 Config A/D Result=40 15:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:24 Get A/D filter: -9.255963e+061 result=40 15:20:24 Get A/D value=-858993460 result=40 15:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:24 Aux= 15:20:24 Message to Camera, serial 225548 queued 15:21:01 Received message from Master: op=PointingHead serial=225561 15:21:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:21:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:21:01 Point started: ret=0 15:21:01 point_skyscan result=0 15:21:02 Check angles 15:21:02 SkyScan query 15:21:02 SkyScan query done: ret=0 az=64.365<-4291 ze=-68.76<-16584 Statuses=0009 0009 15:21:02 Msec=0 True Az=64.365 Ze=-68.76 Az status=0009 Ze status=0009 15:21:02 Check angles 15:21:02 SkyScan query 15:21:03 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.7<-17980 Statuses=0009 0009 15:21:03 Msec=750 True Az=81.795 Ze=-89.7 Az status=0009 Ze status=0009 15:21:03 Check angles 15:21:03 SkyScan query 15:21:04 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.67<-19378 Statuses=0009 0009 15:21:04 Msec=1500 True Az=99.33 Ze=-110.67 Az status=0009 Ze status=0009 15:21:04 Check angles 15:21:04 SkyScan query 15:21:05 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.58<-20772 Statuses=0009 0009 15:21:05 Msec=2250 True Az=116.775 Ze=-131.58 Az status=0009 Ze status=0009 15:21:05 Check angles 15:21:05 SkyScan query 15:21:05 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 15:21:05 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 15:21:06 Check angles 15:21:06 SkyScan query 15:21:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:21:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:21:06 Message to Master queued w/err=0: serial=225561 error=0 15:21:11 Received message from Master: op=Filter serial=225562 15:21:11 Color wheel filter change from 0 to 0 15:21:11 FLIGetFilterPos err=0 currentPosition=0 15:21:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:11 Filter is already there-color wheel unchanged 15:21:11 Received message from Master: op=Shutter serial=225563 15:21:11 Shutter LASER close 15:21:11 Received message from Camera: op=State serial=225565 15:21:11 GetSingleValue result=40 Value=cccccccc 15:21:11 SkyScan query 15:21:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:21:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:12 Parameters OK 15:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:12 Set A/D data flow result=40 15:21:12 Set A/D channel type result=40 15:21:12 Set A/D encoding result=40 15:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:12 Set channel filter=0.000000e+000 result=40 15:21:12 Config A/D Result=40 15:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:12 Get A/D filter: -9.255963e+061 result=40 15:21:12 Get A/D value=-858993460 result=40 15:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:12 Parameters OK 15:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:12 Set A/D data flow result=40 15:21:12 Set A/D channel type result=40 15:21:12 Set A/D encoding result=40 15:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:12 Set channel filter=0.000000e+000 result=40 15:21:12 Config A/D Result=40 15:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:12 Get A/D filter: -9.255963e+061 result=40 15:21:12 Get A/D value=-858993460 result=40 15:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:12 Aux= 15:21:12 Message to Camera, serial 225565 queued 15:21:49 Received message from Master: op=PointingHead serial=225578 15:21:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:21:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:21:49 Point started: ret=0 15:21:49 point_skyscan result=0 15:21:50 Check angles 15:21:50 SkyScan query 15:21:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.105<-23407 Statuses=0009 0009 15:21:50 Msec=0 True Az=113.01 Ze=-171.105 Az status=0009 Ze status=0009 15:21:51 Check angles 15:21:51 SkyScan query 15:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:21:51 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:21:51 Message to Master queued w/err=0: serial=225578 error=0 15:21:56 Received message from Master: op=Filter serial=225579 15:21:56 Color wheel filter change from 0 to 0 15:21:56 FLIGetFilterPos err=0 currentPosition=0 15:21:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:56 Filter is already there-color wheel unchanged 15:21:56 Received message from Master: op=Shutter serial=225580 15:21:56 Shutter LASER open 15:21:56 Received message from Camera: op=State serial=225582 15:21:56 GetSingleValue result=40 Value=cccccccc 15:21:56 SkyScan query 15:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:21:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:57 Parameters OK 15:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:57 Set A/D data flow result=40 15:21:57 Set A/D channel type result=40 15:21:57 Set A/D encoding result=40 15:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:57 Set channel filter=0.000000e+000 result=40 15:21:57 Config A/D Result=40 15:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:57 Get A/D filter: -9.255963e+061 result=40 15:21:57 Get A/D value=-858993460 result=40 15:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:57 Parameters OK 15:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:57 Set A/D data flow result=40 15:21:57 Set A/D channel type result=40 15:21:57 Set A/D encoding result=40 15:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:57 Set channel filter=0.000000e+000 result=40 15:21:57 Config A/D Result=40 15:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:57 Get A/D filter: -9.255963e+061 result=40 15:21:57 Get A/D value=-858993460 result=40 15:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:57 Aux= 15:21:57 Message to Camera, serial 225582 queued 15:22:05 Received message from Master: op=Shutter serial=225592 15:22:05 Shutter LASER close 15:22:06 Received message from Master: op=PointingHead serial=225596 15:22:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:22:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:22:06 Point started: ret=0 15:22:06 point_skyscan result=0 15:22:07 Check angles 15:22:07 SkyScan query 15:22:08 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.265<-21551 Statuses=0009 0009 15:22:08 Msec=0 True Az=135.885 Ze=-143.265 Az status=0009 Ze status=0009 15:22:08 Check angles 15:22:08 SkyScan query 15:22:09 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.28<-20152 Statuses=0009 0009 15:22:09 Msec=750 True Az=153.36 Ze=-122.28 Az status=0009 Ze status=0009 15:22:09 Check angles 15:22:09 SkyScan query 15:22:09 SkyScan query done: ret=0 az=170.865<-11391 ze=-101.4<-18760 Statuses=0009 0009 15:22:09 Msec=1500 True Az=170.865 Ze=-101.4 Az status=0009 Ze status=0009 15:22:09 Check angles 15:22:09 SkyScan query 15:22:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.43<-17362 Statuses=0008 0009 15:22:10 Msec=2250 True Az=175.995 Ze=-80.43 Az status=0008 Ze status=0009 15:22:10 Check angles 15:22:10 SkyScan query 15:22:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.46<-15964 Statuses=0008 0009 15:22:11 Msec=3000 True Az=175.995 Ze=-59.46 Az status=0008 Ze status=0009 15:22:11 Check angles 15:22:11 SkyScan query 15:22:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:22:12 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:22:12 Message to Master queued w/err=0: serial=225596 error=0 15:22:17 Received message from Master: op=Filter serial=225597 15:22:17 Color wheel filter change from 0 to 0 15:22:17 FLIGetFilterPos err=0 currentPosition=0 15:22:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:17 Filter is already there-color wheel unchanged 15:22:17 Received message from Master: op=Shutter serial=225598 15:22:17 Shutter LASER close 15:22:17 Received message from Camera: op=State serial=225600 15:22:17 GetSingleValue result=40 Value=cccccccc 15:22:17 SkyScan query 15:22:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:22:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:17 Parameters OK 15:22:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:17 Set A/D data flow result=40 15:22:17 Set A/D channel type result=40 15:22:17 Set A/D encoding result=40 15:22:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:17 Set channel filter=0.000000e+000 result=40 15:22:17 Config A/D Result=40 15:22:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:17 Get A/D filter: -9.255963e+061 result=40 15:22:17 Get A/D value=-858993460 result=40 15:22:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:17 Parameters OK 15:22:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:17 Set A/D data flow result=40 15:22:17 Set A/D channel type result=40 15:22:17 Set A/D encoding result=40 15:22:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:17 Set channel filter=0.000000e+000 result=40 15:22:17 Config A/D Result=40 15:22:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:17 Get A/D filter: -9.255963e+061 result=40 15:22:17 Get A/D value=-858993460 result=40 15:22:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:17 Aux= 15:22:17 Message to Camera, serial 225600 queued 15:22:54 Received message from Master: op=PointingHead serial=225613 15:22:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:22:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:22:55 Point started: ret=0 15:22:55 point_skyscan result=0 15:22:55 Check angles 15:22:55 SkyScan query 15:22:56 SkyScan query done: ret=0 az=153.18<-10212 ze=-22.005<-13467 Statuses=0009 0009 15:22:56 Msec=0 True Az=153.18 Ze=-22.005 Az status=0009 Ze status=0009 15:22:56 Check angles 15:22:56 SkyScan query 15:22:57 SkyScan query done: ret=0 az=135.765<-9051 ze=-0.99<-12066 Statuses=0009 0009 15:22:57 Msec=750 True Az=135.765 Ze=-0.99 Az status=0009 Ze status=0009 15:22:57 Check angles 15:22:57 SkyScan query 15:22:58 SkyScan query done: ret=0 az=118.23<-7882 ze=19.935<-10671 Statuses=0009 0009 15:22:58 Msec=1500 True Az=118.23 Ze=19.935 Az status=0009 Ze status=0009 15:22:58 Check angles 15:22:58 SkyScan query 15:22:58 SkyScan query done: ret=0 az=100.8<-6720 ze=40.92<-9272 Statuses=0009 0009 15:22:58 Msec=2250 True Az=100.8 Ze=40.92 Az status=0009 Ze status=0009 15:22:58 Check angles 15:22:58 SkyScan query 15:22:59 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 15:22:59 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 15:22:59 Check angles 15:22:59 SkyScan query 15:23:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:23:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:23:00 Message to Master queued w/err=0: serial=225613 error=0 15:23:05 Received message from Master: op=Filter serial=225614 15:23:05 Color wheel filter change from 0 to 0 15:23:05 FLIGetFilterPos err=0 currentPosition=0 15:23:05 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:05 Filter is already there-color wheel unchanged 15:23:05 Received message from Master: op=Shutter serial=225615 15:23:05 Shutter LASER close 15:23:05 Received message from Camera: op=State serial=225617 15:23:05 GetSingleValue result=40 Value=cccccccc 15:23:05 SkyScan query 15:23:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:23:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:06 Parameters OK 15:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:06 Set A/D data flow result=40 15:23:06 Set A/D channel type result=40 15:23:06 Set A/D encoding result=40 15:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:06 Set channel filter=0.000000e+000 result=40 15:23:06 Config A/D Result=40 15:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:06 Get A/D filter: -9.255963e+061 result=40 15:23:06 Get A/D value=-858993460 result=40 15:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:06 Parameters OK 15:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:06 Set A/D data flow result=40 15:23:06 Set A/D channel type result=40 15:23:06 Set A/D encoding result=40 15:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:06 Set channel filter=0.000000e+000 result=40 15:23:06 Config A/D Result=40 15:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:06 Get A/D filter: -9.255963e+061 result=40 15:23:06 Get A/D value=-858993460 result=40 15:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:06 Aux= 15:23:06 Message to Camera, serial 225617 queued 15:23:42 Received message from Master: op=PointingHead serial=225630 15:23:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:23:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:23:43 Point started: ret=0 15:23:43 point_skyscan result=0 15:23:43 Check angles 15:23:43 SkyScan query 15:23:44 SkyScan query done: ret=0 az=108.99<-7266 ze=38.475<-9435 Statuses=0009 0008 15:23:44 Msec=0 True Az=108.99 Ze=38.475 Az status=0009 Ze status=0008 15:23:44 Check angles 15:23:44 SkyScan query 15:23:45 SkyScan query done: ret=0 az=126.45<-8430 ze=38.49<-9434 Statuses=0009 0008 15:23:45 Msec=750 True Az=126.45 Ze=38.49 Az status=0009 Ze status=0008 15:23:45 Check angles 15:23:45 SkyScan query 15:23:46 SkyScan query done: ret=0 az=144<-9600 ze=38.505<-9433 Statuses=0009 0008 15:23:46 Msec=1500 True Az=144 Ze=38.505 Az status=0009 Ze status=0008 15:23:46 Check angles 15:23:46 SkyScan query 15:23:46 SkyScan query done: ret=0 az=161.31<-10754 ze=38.505<-9433 Statuses=0009 0008 15:23:46 Msec=2250 True Az=161.31 Ze=38.505 Az status=0009 Ze status=0008 15:23:46 Check angles 15:23:46 SkyScan query 15:23:47 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:23:47 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:23:47 Check angles 15:23:47 SkyScan query 15:23:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:23:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:23:48 Message to Master queued w/err=0: serial=225630 error=0 15:23:53 Received message from Master: op=Filter serial=225631 15:23:53 Color wheel filter change from 0 to 0 15:23:53 FLIGetFilterPos err=0 currentPosition=0 15:23:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:53 Filter is already there-color wheel unchanged 15:23:53 Received message from Master: op=Shutter serial=225632 15:23:53 Shutter LASER close 15:23:53 Received message from Camera: op=State serial=225634 15:23:53 GetSingleValue result=40 Value=cccccccc 15:23:53 SkyScan query 15:23:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:23:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:54 Parameters OK 15:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:54 Set A/D data flow result=40 15:23:54 Set A/D channel type result=40 15:23:54 Set A/D encoding result=40 15:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:54 Set channel filter=0.000000e+000 result=40 15:23:54 Config A/D Result=40 15:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:54 Get A/D filter: -9.255963e+061 result=40 15:23:54 Get A/D value=-858993460 result=40 15:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:54 Parameters OK 15:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:54 Set A/D data flow result=40 15:23:54 Set A/D channel type result=40 15:23:54 Set A/D encoding result=40 15:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:54 Set channel filter=0.000000e+000 result=40 15:23:54 Config A/D Result=40 15:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:54 Get A/D filter: -9.255963e+061 result=40 15:23:54 Get A/D value=-858993460 result=40 15:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:54 Aux= 15:23:54 Message to Camera, serial 225634 queued 15:24:30 Received message from Master: op=PointingHead serial=225647 15:24:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:24:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:24:31 Point started: ret=0 15:24:31 point_skyscan result=0 15:24:32 Check angles 15:24:32 SkyScan query 15:24:32 SkyScan query done: ret=0 az=152.955<-10197 ze=8.685<-11421 Statuses=0009 0009 15:24:32 Msec=0 True Az=152.955 Ze=8.685 Az status=0009 Ze status=0009 15:24:32 Check angles 15:24:32 SkyScan query 15:24:33 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.69<-12846 Statuses=0009 0009 15:24:33 Msec=750 True Az=135.165 Ze=-12.69 Az status=0009 Ze status=0009 15:24:33 Check angles 15:24:33 SkyScan query 15:24:34 SkyScan query done: ret=0 az=117.645<-7843 ze=-33.69<-14246 Statuses=0009 0009 15:24:34 Msec=1500 True Az=117.645 Ze=-33.69 Az status=0009 Ze status=0009 15:24:34 Check angles 15:24:34 SkyScan query 15:24:34 SkyScan query done: ret=0 az=100.29<-6686 ze=-51.555<-15437 Statuses=0009 0009 15:24:34 Msec=2250 True Az=100.29 Ze=-51.555 Az status=0009 Ze status=0009 15:24:35 Check angles 15:24:35 SkyScan query 15:24:35 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:24:35 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:24:35 Check angles 15:24:35 SkyScan query 15:24:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:24:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:24:36 Message to Master queued w/err=0: serial=225647 error=0 15:24:41 Received message from Master: op=Filter serial=225648 15:24:41 Color wheel filter change from 0 to 0 15:24:41 FLIGetFilterPos err=0 currentPosition=0 15:24:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:41 Filter is already there-color wheel unchanged 15:24:41 Received message from Master: op=Shutter serial=225649 15:24:41 Shutter LASER close 15:24:41 Received message from Camera: op=State serial=225651 15:24:41 GetSingleValue result=40 Value=cccccccc 15:24:41 SkyScan query 15:24:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:24:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:42 Parameters OK 15:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:42 Set A/D data flow result=40 15:24:42 Set A/D channel type result=40 15:24:42 Set A/D encoding result=40 15:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:42 Set channel filter=0.000000e+000 result=40 15:24:42 Config A/D Result=40 15:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:42 Get A/D filter: -9.255963e+061 result=40 15:24:42 Get A/D value=-858993460 result=40 15:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:42 Parameters OK 15:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:42 Set A/D data flow result=40 15:24:42 Set A/D channel type result=40 15:24:42 Set A/D encoding result=40 15:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:42 Set channel filter=0.000000e+000 result=40 15:24:42 Config A/D Result=40 15:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:42 Get A/D filter: -9.255963e+061 result=40 15:24:42 Get A/D value=-858993460 result=40 15:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:42 Aux= 15:24:42 Message to Camera, serial 225651 queued 15:25:19 Received message from Master: op=PointingHead serial=225664 15:25:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:25:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:25:19 Point started: ret=0 15:25:19 point_skyscan result=0 15:25:20 Check angles 15:25:20 SkyScan query 15:25:20 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.3<-17420 Statuses=0009 0009 15:25:20 Msec=0 True Az=109.005 Ze=-81.3 Az status=0009 Ze status=0009 15:25:20 Check angles 15:25:20 SkyScan query 15:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 15:25:21 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 15:25:21 Check angles 15:25:21 SkyScan query 15:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.225<-20215 Statuses=0008 0009 15:25:22 Msec=1500 True Az=112.995 Ze=-123.225 Az status=0008 Ze status=0009 15:25:22 Check angles 15:25:22 SkyScan query 15:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.18<-21612 Statuses=0008 0009 15:25:22 Msec=2250 True Az=112.995 Ze=-144.18 Az status=0008 Ze status=0009 15:25:23 Check angles 15:25:23 SkyScan query 15:25:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 15:25:23 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 15:25:23 Check angles 15:25:23 SkyScan query 15:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:25:24 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:25:24 Message to Master queued w/err=0: serial=225664 error=0 15:25:29 Received message from Master: op=Filter serial=225665 15:25:29 Color wheel filter change from 0 to 0 15:25:29 FLIGetFilterPos err=0 currentPosition=0 15:25:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:29 Filter is already there-color wheel unchanged 15:25:29 Received message from Master: op=Shutter serial=225666 15:25:29 Shutter LASER open 15:25:29 Received message from Camera: op=State serial=225668 15:25:29 GetSingleValue result=40 Value=cccccccc 15:25:29 SkyScan query 15:25:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:25:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:30 Parameters OK 15:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:30 Set A/D data flow result=40 15:25:30 Set A/D channel type result=40 15:25:30 Set A/D encoding result=40 15:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:30 Set channel filter=0.000000e+000 result=40 15:25:30 Config A/D Result=40 15:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:30 Get A/D filter: -9.255963e+061 result=40 15:25:30 Get A/D value=-858993460 result=40 15:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:30 Parameters OK 15:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:30 Set A/D data flow result=40 15:25:30 Set A/D channel type result=40 15:25:30 Set A/D encoding result=40 15:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:30 Set channel filter=0.000000e+000 result=40 15:25:30 Config A/D Result=40 15:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:30 Get A/D filter: -9.255963e+061 result=40 15:25:30 Get A/D value=-858993460 result=40 15:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:30 Aux= 15:25:30 Message to Camera, serial 225668 queued 15:25:38 Received message from Master: op=Shutter serial=225678 15:25:38 Shutter LASER close 15:25:39 Received message from Master: op=PointingHead serial=225682 15:25:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:25:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:25:39 Point started: ret=0 15:25:39 point_skyscan result=0 15:25:40 Check angles 15:25:40 SkyScan query 15:25:40 SkyScan query done: ret=0 az=89.16<-5944 ze=156.45<-1570 Statuses=0009 0009 15:25:40 Msec=0 True Az=89.16 Ze=156.45 Az status=0009 Ze status=0009 15:25:41 Check angles 15:25:41 SkyScan query 15:25:41 SkyScan query done: ret=0 az=71.85<-4790 ze=135.96<-2936 Statuses=0009 0009 15:25:41 Msec=750 True Az=71.85 Ze=135.96 Az status=0009 Ze status=0009 15:25:41 Check angles 15:25:41 SkyScan query 15:25:42 SkyScan query done: ret=0 az=54.42<-3628 ze=114.975<-4335 Statuses=0009 0009 15:25:42 Msec=1500 True Az=54.42 Ze=114.975 Az status=0009 Ze status=0009 15:25:42 Check angles 15:25:42 SkyScan query 15:25:43 SkyScan query done: ret=0 az=41.01<-2734 ze=93.615<-5759 Statuses=0009 0009 [UTC 2018-12-17 15:25:43] 15:25:43 Msec=2250 True Az=41.01 Ze=93.615 Az status=0009 Ze status=0009 15:25:43 Check angles 15:25:43 SkyScan query 15:25:43 SkyScan query done: ret=0 az=40.98<-2732 ze=72.225<-7185 Statuses=0008 0009 15:25:43 Msec=3000 True Az=40.98 Ze=72.225 Az status=0008 Ze status=0009 15:25:44 Check angles 15:25:44 SkyScan query 15:25:44 SkyScan query done: ret=0 az=40.98<-2732 ze=52.14<-8524 Statuses=0008 0009 15:25:44 Msec=3750 True Az=40.98 Ze=52.14 Az status=0008 Ze status=0009 15:25:44 Check angles 15:25:44 SkyScan query 15:25:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:25:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:25:45 Message to Master queued w/err=0: serial=225682 error=0 15:25:50 Received message from Master: op=Filter serial=225683 15:25:50 Color wheel filter change from 0 to 0 15:25:50 FLIGetFilterPos err=0 currentPosition=0 15:25:50 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:50 Filter is already there-color wheel unchanged 15:25:50 Received message from Master: op=Shutter serial=225684 15:25:50 Shutter LASER close 15:25:50 Received message from Camera: op=State serial=225686 15:25:50 GetSingleValue result=40 Value=cccccccc 15:25:50 SkyScan query 15:25:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:25:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:51 Parameters OK 15:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:51 Set A/D data flow result=40 15:25:51 Set A/D channel type result=40 15:25:51 Set A/D encoding result=40 15:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:51 Set channel filter=0.000000e+000 result=40 15:25:51 Config A/D Result=40 15:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:51 Get A/D filter: -9.255963e+061 result=40 15:25:51 Get A/D value=-858993460 result=40 15:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:51 Parameters OK 15:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:51 Set A/D data flow result=40 15:25:51 Set A/D channel type result=40 15:25:51 Set A/D encoding result=40 15:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:51 Set channel filter=0.000000e+000 result=40 15:25:51 Config A/D Result=40 15:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:51 Get A/D filter: -9.255963e+061 result=40 15:25:51 Get A/D value=-858993460 result=40 15:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:51 Aux= 15:25:51 Message to Camera, serial 225686 queued 15:26:28 Received message from Master: op=PointingHead serial=225699 15:26:28 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:26:28 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:26:28 Point started: ret=0 15:26:28 point_skyscan result=0 15:26:29 Check angles 15:26:29 SkyScan query 15:26:29 SkyScan query done: ret=0 az=64.44<-4296 ze=66.555<-7563 Statuses=0009 0008 15:26:29 Msec=0 True Az=64.44 Ze=66.555 Az status=0009 Ze status=0008 15:26:30 Check angles 15:26:30 SkyScan query 15:26:30 SkyScan query done: ret=0 az=82.38<-5492 ze=66.495<-7567 Statuses=0009 0008 15:26:30 Msec=750 True Az=82.38 Ze=66.495 Az status=0009 Ze status=0008 15:26:30 Check angles 15:26:30 SkyScan query 15:26:31 SkyScan query done: ret=0 az=99.825<-6655 ze=66.495<-7567 Statuses=0009 0008 15:26:31 Msec=1500 True Az=99.825 Ze=66.495 Az status=0009 Ze status=0008 15:26:31 Check angles 15:26:31 SkyScan query 15:26:32 SkyScan query done: ret=0 az=117.225<-7815 ze=66.495<-7567 Statuses=0009 0008 15:26:32 Msec=2250 True Az=117.225 Ze=66.495 Az status=0009 Ze status=0008 15:26:32 Check angles 15:26:32 SkyScan query 15:26:32 SkyScan query done: ret=0 az=134.745<-8983 ze=66.495<-7567 Statuses=0009 0008 15:26:32 Msec=3000 True Az=134.745 Ze=66.495 Az status=0009 Ze status=0008 15:26:33 Check angles 15:26:33 SkyScan query 15:26:33 SkyScan query done: ret=0 az=152.355<-10157 ze=66.495<-7567 Statuses=0009 0008 15:26:33 Msec=3750 True Az=152.355 Ze=66.495 Az status=0009 Ze status=0008 15:26:33 Check angles 15:26:33 SkyScan query 15:26:34 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:26:34 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:26:34 Message to Master queued w/err=0: serial=225699 error=0 15:26:39 Received message from Master: op=Filter serial=225700 15:26:39 Color wheel filter change from 0 to 0 15:26:39 FLIGetFilterPos err=0 currentPosition=0 15:26:39 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:39 Filter is already there-color wheel unchanged 15:26:39 Received message from Master: op=Shutter serial=225701 15:26:39 Shutter LASER close 15:26:39 Received message from Camera: op=State serial=225703 15:26:39 GetSingleValue result=40 Value=cccccccc 15:26:39 SkyScan query 15:26:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:26:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:40 Parameters OK 15:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:40 Set A/D data flow result=40 15:26:40 Set A/D channel type result=40 15:26:40 Set A/D encoding result=40 15:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:40 Set channel filter=0.000000e+000 result=40 15:26:40 Config A/D Result=40 15:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:40 Get A/D filter: -9.255963e+061 result=40 15:26:40 Get A/D value=-858993460 result=40 15:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:40 Parameters OK 15:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:40 Set A/D data flow result=40 15:26:40 Set A/D channel type result=40 15:26:40 Set A/D encoding result=40 15:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:40 Set channel filter=0.000000e+000 result=40 15:26:40 Config A/D Result=40 15:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:40 Get A/D filter: -9.255963e+061 result=40 15:26:40 Get A/D value=-858993460 result=40 15:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:26:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:26:40 Aux= 15:26:40 Message to Camera, serial 225703 queued 15:27:17 Received message from Master: op=PointingHead serial=225716 15:27:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:27:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:27:17 Point started: ret=0 15:27:17 point_skyscan result=0 15:27:18 Check angles 15:27:18 SkyScan query 15:27:18 SkyScan query done: ret=0 az=134.97<-8998 ze=36.72<-9552 Statuses=0009 0009 15:27:18 Msec=0 True Az=134.97 Ze=36.72 Az status=0009 Ze status=0009 15:27:18 Check angles 15:27:18 SkyScan query 15:27:19 SkyScan query done: ret=0 az=117.135<-7809 ze=15.315<-10979 Statuses=0009 0009 15:27:19 Msec=750 True Az=117.135 Ze=15.315 Az status=0009 Ze status=0009 15:27:19 Check angles 15:27:19 SkyScan query 15:27:20 SkyScan query done: ret=0 az=99.375<-6625 ze=-6.165<-12411 Statuses=0009 0009 15:27:20 Msec=1500 True Az=99.375 Ze=-6.165 Az status=0009 Ze status=0009 15:27:20 Check angles 15:27:20 SkyScan query 15:27:21 SkyScan query done: ret=0 az=81.825<-5455 ze=-27.09<-13806 Statuses=0009 0009 15:27:21 Msec=2250 True Az=81.825 Ze=-27.09 Az status=0009 Ze status=0009 15:27:21 Check angles 15:27:21 SkyScan query 15:27:21 SkyScan query done: ret=0 az=64.395<-4293 ze=-38.58<-14572 Statuses=0009 0008 15:27:21 Msec=3000 True Az=64.395 Ze=-38.58 Az status=0009 Ze status=0008 15:27:21 Check angles 15:27:21 SkyScan query 15:27:22 SkyScan query done: ret=0 az=46.845<-3123 ze=-38.52<-14568 Statuses=0009 0008 15:27:22 Msec=3750 True Az=46.845 Ze=-38.52 Az status=0009 Ze status=0008 15:27:22 Check angles 15:27:22 SkyScan query 15:27:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:27:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:27:23 Message to Master queued w/err=0: serial=225716 error=0 15:27:28 Received message from Master: op=Filter serial=225717 15:27:28 Color wheel filter change from 0 to 0 15:27:28 FLIGetFilterPos err=0 currentPosition=0 15:27:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:28 Filter is already there-color wheel unchanged 15:27:28 Received message from Master: op=Shutter serial=225718 15:27:28 Shutter LASER close 15:27:28 Received message from Camera: op=State serial=225720 15:27:28 GetSingleValue result=40 Value=cccccccc 15:27:28 SkyScan query 15:27:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:27:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:29 Parameters OK 15:27:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:29 Set A/D data flow result=40 15:27:29 Set A/D channel type result=40 15:27:29 Set A/D encoding result=40 15:27:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:29 Set channel filter=0.000000e+000 result=40 15:27:29 Config A/D Result=40 15:27:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:29 Get A/D filter: -9.255963e+061 result=40 15:27:29 Get A/D value=-858993460 result=40 15:27:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:29 Parameters OK 15:27:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:29 Set A/D data flow result=40 15:27:29 Set A/D channel type result=40 15:27:29 Set A/D encoding result=40 15:27:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:29 Set channel filter=0.000000e+000 result=40 15:27:29 Config A/D Result=40 15:27:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:29 Get A/D filter: -9.255963e+061 result=40 15:27:29 Get A/D value=-858993460 result=40 15:27:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:29 Aux= 15:27:29 Message to Camera, serial 225720 queued 15:28:05 Received message from Master: op=PointingHead serial=225732 15:28:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:28:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:28:05 Point started: ret=0 15:28:05 point_skyscan result=0 15:28:06 Check angles 15:28:06 SkyScan query 15:28:06 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.145<-16543 Statuses=0009 0009 15:28:06 Msec=0 True Az=63.78 Ze=-68.145 Az status=0009 Ze status=0009 15:28:06 Check angles 15:28:06 SkyScan query 15:28:07 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.1<-17940 Statuses=0009 0009 15:28:07 Msec=750 True Az=81.3 Ze=-89.1 Az status=0009 Ze status=0009 15:28:07 Check angles 15:28:07 SkyScan query 15:28:08 SkyScan query done: ret=0 az=98.76<-6584 ze=-110.025<-19335 Statuses=0009 0009 15:28:08 Msec=1500 True Az=98.76 Ze=-110.025 Az status=0009 Ze status=0009 15:28:08 Check angles 15:28:08 SkyScan query 15:28:08 SkyScan query done: ret=0 az=116.085<-7739 ze=-131.01<-20734 Statuses=0009 0009 15:28:08 Msec=2250 True Az=116.085 Ze=-131.01 Az status=0009 Ze status=0009 15:28:09 Check angles 15:28:09 SkyScan query 15:28:09 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 15:28:09 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 15:28:09 Check angles 15:28:09 SkyScan query 15:28:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:28:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:28:10 Message to Master queued w/err=0: serial=225732 error=0 15:28:15 Received message from Master: op=Filter serial=225733 15:28:15 Color wheel filter change from 0 to 0 15:28:15 FLIGetFilterPos err=0 currentPosition=0 15:28:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:15 Filter is already there-color wheel unchanged 15:28:15 Received message from Master: op=Shutter serial=225734 15:28:15 Shutter LASER close 15:28:15 Received message from Camera: op=State serial=225736 15:28:15 GetSingleValue result=40 Value=cccccccc 15:28:15 SkyScan query 15:28:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:28:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:16 Parameters OK 15:28:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:16 Set A/D data flow result=40 15:28:16 Set A/D channel type result=40 15:28:16 Set A/D encoding result=40 15:28:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:16 Set channel filter=0.000000e+000 result=40 15:28:16 Config A/D Result=40 15:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:16 Get A/D filter: -9.255963e+061 result=40 15:28:16 Get A/D value=-858993460 result=40 15:28:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:16 Parameters OK 15:28:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:16 Set A/D data flow result=40 15:28:16 Set A/D channel type result=40 15:28:16 Set A/D encoding result=40 15:28:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:16 Set channel filter=0.000000e+000 result=40 15:28:16 Config A/D Result=40 15:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:16 Get A/D filter: -9.255963e+061 result=40 15:28:16 Get A/D value=-858993460 result=40 15:28:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:28:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:28:16 Aux= 15:28:16 Message to Camera, serial 225736 queued 15:28:53 Received message from Master: op=PointingHead serial=225749 15:28:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:28:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:28:53 Point started: ret=0 15:28:53 point_skyscan result=0 15:28:54 Check angles 15:28:54 SkyScan query 15:28:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 15:28:54 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 15:28:54 Check angles 15:28:54 SkyScan query 15:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:28:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:28:55 Message to Master queued w/err=0: serial=225749 error=0 15:29:00 Received message from Master: op=Filter serial=225750 15:29:00 Color wheel filter change from 0 to 0 15:29:00 FLIGetFilterPos err=0 currentPosition=0 15:29:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:00 Filter is already there-color wheel unchanged 15:29:00 Received message from Master: op=Shutter serial=225751 15:29:00 Shutter LASER open 15:29:00 Received message from Camera: op=State serial=225753 15:29:00 GetSingleValue result=40 Value=cccccccc 15:29:00 SkyScan query 15:29:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:29:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:01 Parameters OK 15:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:01 Set A/D data flow result=40 15:29:01 Set A/D channel type result=40 15:29:01 Set A/D encoding result=40 15:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:01 Set channel filter=0.000000e+000 result=40 15:29:01 Config A/D Result=40 15:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:01 Get A/D filter: -9.255963e+061 result=40 15:29:01 Get A/D value=-858993460 result=40 15:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:01 Parameters OK 15:29:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:01 Set A/D data flow result=40 15:29:01 Set A/D channel type result=40 15:29:01 Set A/D encoding result=40 15:29:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:01 Set channel filter=0.000000e+000 result=40 15:29:01 Config A/D Result=40 15:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:01 Get A/D filter: -9.255963e+061 result=40 15:29:01 Get A/D value=-858993460 result=40 15:29:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:01 Aux= 15:29:01 Message to Camera, serial 225753 queued 15:29:08 Received message from Master: op=Shutter serial=225762 15:29:08 Shutter LASER close 15:29:09 Received message from Master: op=PointingHead serial=225766 15:29:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:29:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:29:09 Point started: ret=0 15:29:09 point_skyscan result=0 15:29:10 Check angles 15:29:10 SkyScan query 15:29:11 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.83<-21522 Statuses=0009 0009 15:29:11 Msec=0 True Az=136.35 Ze=-142.83 Az status=0009 Ze status=0009 15:29:11 Check angles 15:29:11 SkyScan query 15:29:11 SkyScan query done: ret=0 az=154.14<-10276 ze=-121.47<-20098 Statuses=0009 0009 15:29:11 Msec=750 True Az=154.14 Ze=-121.47 Az status=0009 Ze status=0009 15:29:12 Check angles 15:29:12 SkyScan query 15:29:12 SkyScan query done: ret=0 az=172.035<-11469 ze=-100.035<-18669 Statuses=0009 0009 15:29:12 Msec=1500 True Az=172.035 Ze=-100.035 Az status=0009 Ze status=0009 15:29:12 Check angles 15:29:12 SkyScan query 15:29:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.08<-17272 Statuses=0008 0009 15:29:13 Msec=2250 True Az=175.995 Ze=-79.08 Az status=0008 Ze status=0009 15:29:13 Check angles 15:29:13 SkyScan query 15:29:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.11<-15874 Statuses=0008 0009 15:29:14 Msec=3000 True Az=176.01 Ze=-58.11 Az status=0008 Ze status=0009 15:29:14 Check angles 15:29:14 SkyScan query 15:29:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.45<-15430 Statuses=0008 0008 15:29:14 Msec=3750 True Az=176.01 Ze=-51.45 Az status=0008 Ze status=0008 15:29:14 Message to Master queued w/err=0: serial=225766 error=0 15:29:19 Received message from Master: op=Filter serial=225767 15:29:19 Color wheel filter change from 0 to 0 15:29:19 FLIGetFilterPos err=0 currentPosition=0 15:29:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:19 Filter is already there-color wheel unchanged 15:29:20 Received message from Master: op=Shutter serial=225768 15:29:20 Shutter LASER close 15:29:20 Received message from Camera: op=State serial=225770 15:29:20 GetSingleValue result=40 Value=cccccccc 15:29:20 SkyScan query 15:29:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:29:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:20 Parameters OK 15:29:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:20 Set A/D data flow result=40 15:29:20 Set A/D channel type result=40 15:29:20 Set A/D encoding result=40 15:29:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:20 Set channel filter=0.000000e+000 result=40 15:29:20 Config A/D Result=40 15:29:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:20 Get A/D filter: -9.255963e+061 result=40 15:29:20 Get A/D value=-858993460 result=40 15:29:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:20 Parameters OK 15:29:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:20 Set A/D data flow result=40 15:29:20 Set A/D channel type result=40 15:29:20 Set A/D encoding result=40 15:29:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:20 Set channel filter=0.000000e+000 result=40 15:29:20 Config A/D Result=40 15:29:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:20 Get A/D filter: -9.255963e+061 result=40 15:29:20 Get A/D value=-858993460 result=40 15:29:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:20 Aux= 15:29:20 Message to Camera, serial 225770 queued 15:29:57 Received message from Master: op=PointingHead serial=225783 15:29:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:29:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:29:58 Point started: ret=0 15:29:58 point_skyscan result=0 15:29:58 Check angles 15:29:58 SkyScan query 15:29:59 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.065<-13471 Statuses=0009 0009 15:29:59 Msec=0 True Az=153.225 Ze=-22.065 Az status=0009 Ze status=0009 15:29:59 Check angles 15:29:59 SkyScan query 15:30:00 SkyScan query done: ret=0 az=135.825<-9055 ze=-1.08<-12072 Statuses=0009 0009 15:30:00 Msec=750 True Az=135.825 Ze=-1.08 Az status=0009 Ze status=0009 15:30:00 Check angles 15:30:00 SkyScan query 15:30:00 SkyScan query done: ret=0 az=118.275<-7885 ze=19.86<-10676 Statuses=0009 0009 15:30:00 Msec=1500 True Az=118.275 Ze=19.86 Az status=0009 Ze status=0009 15:30:01 Check angles 15:30:01 SkyScan query 15:30:01 SkyScan query done: ret=0 az=100.905<-6727 ze=40.815<-9279 Statuses=0009 0009 15:30:01 Msec=2250 True Az=100.905 Ze=40.815 Az status=0009 Ze status=0009 15:30:01 Check angles 15:30:01 SkyScan query 15:30:02 SkyScan query done: ret=0 az=85.95<-5730 ze=51.555<-8563 Statuses=0009 0008 15:30:02 Msec=3000 True Az=85.95 Ze=51.555 Az status=0009 Ze status=0008 15:30:02 Check angles 15:30:02 SkyScan query 15:30:03 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 15:30:03 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 15:30:03 Message to Master queued w/err=0: serial=225783 error=0 15:30:08 Received message from Master: op=Filter serial=225784 15:30:08 Color wheel filter change from 0 to 0 15:30:08 FLIGetFilterPos err=0 currentPosition=0 15:30:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:08 Filter is already there-color wheel unchanged 15:30:08 Received message from Master: op=Shutter serial=225785 15:30:08 Shutter LASER close 15:30:08 Received message from Camera: op=State serial=225787 15:30:08 GetSingleValue result=40 Value=cccccccc 15:30:08 SkyScan query 15:30:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:30:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:08 Parameters OK 15:30:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:08 Set A/D data flow result=40 15:30:08 Set A/D channel type result=40 15:30:08 Set A/D encoding result=40 15:30:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:08 Set channel filter=0.000000e+000 result=40 15:30:08 Config A/D Result=40 15:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:08 Get A/D filter: -9.255963e+061 result=40 15:30:08 Get A/D value=-858993460 result=40 15:30:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:08 Parameters OK 15:30:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:08 Set A/D data flow result=40 15:30:08 Set A/D channel type result=40 15:30:08 Set A/D encoding result=40 15:30:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:08 Set channel filter=0.000000e+000 result=40 15:30:08 Config A/D Result=40 15:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:08 Get A/D filter: -9.255963e+061 result=40 15:30:08 Get A/D value=-858993460 result=40 15:30:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:08 Aux= 15:30:08 Message to Camera, serial 225787 queued 15:30:45 Received message from Master: op=PointingHead serial=225800 15:30:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:30:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:30:46 Point started: ret=0 15:30:46 point_skyscan result=0 15:30:46 Check angles 15:30:46 SkyScan query 15:30:47 SkyScan query done: ret=0 az=109.005<-7267 ze=38.49<-9434 Statuses=0009 0008 15:30:47 Msec=0 True Az=109.005 Ze=38.49 Az status=0009 Ze status=0008 15:30:47 Check angles 15:30:47 SkyScan query 15:30:48 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 15:30:48 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 15:30:48 Check angles 15:30:48 SkyScan query 15:30:48 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 15:30:48 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 15:30:49 Check angles 15:30:49 SkyScan query 15:30:49 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 15:30:49 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 15:30:49 Check angles 15:30:49 SkyScan query 15:30:50 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:30:50 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:30:50 Check angles 15:30:50 SkyScan query 15:30:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:30:51 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:30:51 Message to Master queued w/err=0: serial=225800 error=0 15:30:56 Received message from Master: op=Filter serial=225801 15:30:56 Color wheel filter change from 0 to 0 15:30:56 FLIGetFilterPos err=0 currentPosition=0 15:30:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:56 Filter is already there-color wheel unchanged 15:30:56 Received message from Master: op=Shutter serial=225802 15:30:56 Shutter LASER close 15:30:56 Received message from Camera: op=State serial=225804 15:30:56 GetSingleValue result=40 Value=cccccccc 15:30:56 SkyScan query 15:30:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:30:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:56 Parameters OK 15:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:56 Set A/D data flow result=40 15:30:56 Set A/D channel type result=40 15:30:56 Set A/D encoding result=40 15:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:56 Set channel filter=0.000000e+000 result=40 15:30:56 Config A/D Result=40 15:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:56 Get A/D filter: -9.255963e+061 result=40 15:30:56 Get A/D value=-858993460 result=40 15:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:56 Parameters OK 15:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:56 Set A/D data flow result=40 15:30:56 Set A/D channel type result=40 15:30:56 Set A/D encoding result=40 15:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:56 Set channel filter=0.000000e+000 result=40 15:30:56 Config A/D Result=40 15:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:56 Get A/D filter: -9.255963e+061 result=40 15:30:56 Get A/D value=-858993460 result=40 15:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:56 Aux= 15:30:56 Message to Camera, serial 225804 queued 15:31:33 Received message from Master: op=PointingHead serial=225817 15:31:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:31:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:31:34 Point started: ret=0 15:31:34 point_skyscan result=0 15:31:34 Check angles 15:31:34 SkyScan query 15:31:35 SkyScan query done: ret=0 az=152.955<-10197 ze=8.625<-11425 Statuses=0009 0009 15:31:35 Msec=0 True Az=152.955 Ze=8.625 Az status=0009 Ze status=0009 15:31:35 Check angles 15:31:35 SkyScan query 15:31:36 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.3<-12820 Statuses=0009 0009 15:31:36 Msec=750 True Az=135.405 Ze=-12.3 Az status=0009 Ze status=0009 15:31:36 Check angles 15:31:36 SkyScan query 15:31:37 SkyScan query done: ret=0 az=117.645<-7843 ze=-33.75<-14250 Statuses=0009 0009 15:31:37 Msec=1500 True Az=117.645 Ze=-33.75 Az status=0009 Ze status=0009 15:31:37 Check angles 15:31:37 SkyScan query 15:31:37 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.555<-15437 Statuses=0009 0009 15:31:37 Msec=2250 True Az=100.245 Ze=-51.555 Az status=0009 Ze status=0009 15:31:37 Check angles 15:31:37 SkyScan query 15:31:38 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:31:38 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:31:38 Check angles 15:31:38 SkyScan query 15:31:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:31:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:31:39 Message to Master queued w/err=0: serial=225817 error=0 15:31:44 Received message from Master: op=Filter serial=225818 15:31:44 Color wheel filter change from 0 to 0 15:31:44 FLIGetFilterPos err=0 currentPosition=0 15:31:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:31:44 Filter is already there-color wheel unchanged 15:31:44 Received message from Master: op=Shutter serial=225819 15:31:44 Shutter LASER close 15:31:44 Received message from Camera: op=State serial=225821 15:31:44 GetSingleValue result=40 Value=cccccccc 15:31:44 SkyScan query 15:31:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:31:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:45 Parameters OK 15:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:45 Set A/D data flow result=40 15:31:45 Set A/D channel type result=40 15:31:45 Set A/D encoding result=40 15:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:45 Set channel filter=0.000000e+000 result=40 15:31:45 Config A/D Result=40 15:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:45 Get A/D filter: -9.255963e+061 result=40 15:31:45 Get A/D value=-858993460 result=40 15:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:45 Parameters OK 15:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:45 Set A/D data flow result=40 15:31:45 Set A/D channel type result=40 15:31:45 Set A/D encoding result=40 15:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:45 Set channel filter=0.000000e+000 result=40 15:31:45 Config A/D Result=40 15:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:45 Get A/D filter: -9.255963e+061 result=40 15:31:45 Get A/D value=-858993460 result=40 15:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:31:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:31:45 Aux= 15:31:45 Message to Camera, serial 225821 queued 15:32:21 Received message from Master: op=PointingHead serial=225834 15:32:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:32:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:32:22 Point started: ret=0 15:32:22 point_skyscan result=0 15:32:22 Check angles 15:32:22 SkyScan query 15:32:23 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.135<-17409 Statuses=0009 0009 15:32:23 Msec=0 True Az=108.93 Ze=-81.135 Az status=0009 Ze status=0009 15:32:23 Check angles 15:32:23 SkyScan query 15:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 15:32:24 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 15:32:24 Check angles 15:32:24 SkyScan query 15:32:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.51<-20234 Statuses=0008 0009 15:32:25 Msec=1500 True Az=112.995 Ze=-123.51 Az status=0008 Ze status=0009 15:32:25 Check angles 15:32:25 SkyScan query 15:32:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 15:32:25 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 15:32:25 Check angles 15:32:25 SkyScan query 15:32:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.39<-23026 Statuses=0008 0009 15:32:26 Msec=3000 True Az=112.995 Ze=-165.39 Az status=0008 Ze status=0009 15:32:26 Check angles 15:32:26 SkyScan query 15:32:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:32:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:32:27 Message to Master queued w/err=0: serial=225834 error=0 15:32:32 Received message from Master: op=Filter serial=225835 15:32:32 Color wheel filter change from 0 to 0 15:32:32 FLIGetFilterPos err=0 currentPosition=0 15:32:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:32 Filter is already there-color wheel unchanged 15:32:32 Received message from Master: op=Shutter serial=225836 15:32:32 Shutter LASER open 15:32:32 Received message from Camera: op=State serial=225838 15:32:32 GetSingleValue result=40 Value=cccccccc 15:32:32 SkyScan query 15:32:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:32:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:33 Parameters OK 15:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:33 Set A/D data flow result=40 15:32:33 Set A/D channel type result=40 15:32:33 Set A/D encoding result=40 15:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:33 Set channel filter=0.000000e+000 result=40 15:32:33 Config A/D Result=40 15:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:33 Get A/D filter: -9.255963e+061 result=40 15:32:33 Get A/D value=-858993460 result=40 15:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:33 Parameters OK 15:32:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:33 Set A/D data flow result=40 15:32:33 Set A/D channel type result=40 15:32:33 Set A/D encoding result=40 15:32:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:33 Set channel filter=0.000000e+000 result=40 15:32:33 Config A/D Result=40 15:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:33 Get A/D filter: -9.255963e+061 result=40 15:32:33 Get A/D value=-858993460 result=40 15:32:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:33 Aux= 15:32:33 Message to Camera, serial 225838 queued 15:32:41 Received message from Master: op=Shutter serial=225848 15:32:41 Shutter LASER close 15:32:42 Received message from Master: op=PointingHead serial=225852 15:32:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:32:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:32:42 Point started: ret=0 15:32:42 point_skyscan result=0 15:32:43 Check angles 15:32:43 SkyScan query 15:32:43 SkyScan query done: ret=0 az=89.55<-5970 ze=156.765<-1549 Statuses=0009 0009 15:32:43 Msec=0 True Az=89.55 Ze=156.765 Az status=0009 Ze status=0009 15:32:44 Check angles 15:32:44 SkyScan query 15:32:44 SkyScan query done: ret=0 az=72.045<-4803 ze=135.72<-2952 Statuses=0009 0009 15:32:44 Msec=750 True Az=72.045 Ze=135.72 Az status=0009 Ze status=0009 15:32:44 Check angles 15:32:44 SkyScan query 15:32:45 SkyScan query done: ret=0 az=54.735<-3649 ze=114.84<-4344 Statuses=0009 0009 15:32:45 Msec=1500 True Az=54.735 Ze=114.84 Az status=0009 Ze status=0009 15:32:45 Check angles 15:32:45 SkyScan query 15:32:46 SkyScan query done: ret=0 az=41.01<-2734 ze=93.9<-5740 Statuses=0009 0009 15:32:46 Msec=2250 True Az=41.01 Ze=93.9 Az status=0009 Ze status=0009 15:32:46 Check angles 15:32:46 SkyScan query 15:32:46 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 15:32:46 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 15:32:47 Check angles 15:32:47 SkyScan query 15:32:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 15:32:47 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 15:32:47 Check angles 15:32:47 SkyScan query 15:32:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:32:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:32:48 Message to Master queued w/err=0: serial=225852 error=0 15:32:53 Received message from Master: op=Filter serial=225853 15:32:53 Color wheel filter change from 0 to 0 15:32:53 FLIGetFilterPos err=0 currentPosition=0 15:32:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:53 Filter is already there-color wheel unchanged 15:32:53 Received message from Master: op=Shutter serial=225854 15:32:53 Shutter LASER close 15:32:53 Received message from Camera: op=State serial=225856 15:32:53 GetSingleValue result=40 Value=cccccccc 15:32:53 SkyScan query 15:32:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:32:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:54 Parameters OK 15:32:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:54 Set A/D data flow result=40 15:32:54 Set A/D channel type result=40 15:32:54 Set A/D encoding result=40 15:32:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:54 Set channel filter=0.000000e+000 result=40 15:32:54 Config A/D Result=40 15:32:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:54 Get A/D filter: -9.255963e+061 result=40 15:32:54 Get A/D value=-858993460 result=40 15:32:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:54 Parameters OK 15:32:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:54 Set A/D data flow result=40 15:32:54 Set A/D channel type result=40 15:32:54 Set A/D encoding result=40 15:32:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:54 Set channel filter=0.000000e+000 result=40 15:32:54 Config A/D Result=40 15:32:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:54 Get A/D filter: -9.255963e+061 result=40 15:32:54 Get A/D value=-858993460 result=40 15:32:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:54 Aux= 15:32:54 Message to Camera, serial 225856 queued 15:33:31 Received message from Master: op=PointingHead serial=225869 15:33:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:33:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:33:31 Point started: ret=0 15:33:31 point_skyscan result=0 15:33:32 Check angles 15:33:32 SkyScan query 15:33:32 SkyScan query done: ret=0 az=64.38<-4292 ze=66.54<-7564 Statuses=0009 0008 15:33:32 Msec=0 True Az=64.38 Ze=66.54 Az status=0009 Ze status=0008 15:33:32 Check angles 15:33:32 SkyScan query 15:33:33 SkyScan query done: ret=0 az=81.885<-5459 ze=66.51<-7566 Statuses=0009 0008 15:33:33 Msec=750 True Az=81.885 Ze=66.51 Az status=0009 Ze status=0008 15:33:33 Check angles 15:33:33 SkyScan query 15:33:34 SkyScan query done: ret=0 az=99.825<-6655 ze=66.495<-7567 Statuses=0009 0008 15:33:34 Msec=1500 True Az=99.825 Ze=66.495 Az status=0009 Ze status=0008 15:33:34 Check angles 15:33:34 SkyScan query 15:33:35 SkyScan query done: ret=0 az=117.6<-7840 ze=66.495<-7567 Statuses=0009 0008 15:33:35 Msec=2250 True Az=117.6 Ze=66.495 Az status=0009 Ze status=0008 15:33:35 Check angles 15:33:35 SkyScan query 15:33:35 SkyScan query done: ret=0 az=135.48<-9032 ze=66.495<-7567 Statuses=0009 0008 15:33:35 Msec=3000 True Az=135.48 Ze=66.495 Az status=0009 Ze status=0008 15:33:36 Check angles 15:33:36 SkyScan query 15:33:36 SkyScan query done: ret=0 az=152.7<-10180 ze=66.495<-7567 Statuses=0009 0008 15:33:36 Msec=3750 True Az=152.7 Ze=66.495 Az status=0009 Ze status=0008 15:33:36 Check angles 15:33:36 SkyScan query 15:33:37 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:33:37 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:33:37 Message to Master queued w/err=0: serial=225869 error=0 15:33:42 Received message from Master: op=Filter serial=225870 15:33:42 Color wheel filter change from 0 to 0 15:33:42 FLIGetFilterPos err=0 currentPosition=0 15:33:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:33:42 Filter is already there-color wheel unchanged 15:33:42 Received message from Master: op=Shutter serial=225871 15:33:42 Shutter LASER close 15:33:42 Received message from Camera: op=State serial=225873 15:33:42 GetSingleValue result=40 Value=cccccccc 15:33:42 SkyScan query 15:33:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:33:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:43 Parameters OK 15:33:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:43 Set A/D data flow result=40 15:33:43 Set A/D channel type result=40 15:33:43 Set A/D encoding result=40 15:33:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:43 Set channel filter=0.000000e+000 result=40 15:33:43 Config A/D Result=40 15:33:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:43 Get A/D filter: -9.255963e+061 result=40 15:33:43 Get A/D value=-858993460 result=40 15:33:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:43 Parameters OK 15:33:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:43 Set A/D data flow result=40 15:33:43 Set A/D channel type result=40 15:33:43 Set A/D encoding result=40 15:33:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:43 Set channel filter=0.000000e+000 result=40 15:33:43 Config A/D Result=40 15:33:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:43 Get A/D filter: -9.255963e+061 result=40 15:33:43 Get A/D value=-858993460 result=40 15:33:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:33:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:33:43 Aux= 15:33:43 Message to Camera, serial 225873 queued 15:34:19 Received message from Master: op=PointingHead serial=225886 15:34:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:34:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:34:20 Point started: ret=0 15:34:20 point_skyscan result=0 15:34:21 Check angles 15:34:21 SkyScan query 15:34:21 SkyScan query done: ret=0 az=135.045<-9003 ze=36.705<-9553 Statuses=0009 0009 15:34:21 Msec=0 True Az=135.045 Ze=36.705 Az status=0009 Ze status=0009 15:34:21 Check angles 15:34:21 SkyScan query 15:34:22 SkyScan query done: ret=0 az=117.135<-7809 ze=15.42<-10972 Statuses=0009 0009 15:34:22 Msec=750 True Az=117.135 Ze=15.42 Az status=0009 Ze status=0009 15:34:22 Check angles 15:34:22 SkyScan query 15:34:23 SkyScan query done: ret=0 az=99.84<-6656 ze=-5.61<-12374 Statuses=0009 0009 15:34:23 Msec=1500 True Az=99.84 Ze=-5.61 Az status=0009 Ze status=0009 15:34:23 Check angles 15:34:23 SkyScan query 15:34:23 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.58<-13772 Statuses=0009 0009 15:34:23 Msec=2250 True Az=82.275 Ze=-26.58 Az status=0009 Ze status=0009 15:34:24 Check angles 15:34:24 SkyScan query 15:34:24 SkyScan query done: ret=0 az=64.83<-4322 ze=-38.58<-14572 Statuses=0009 0008 15:34:24 Msec=3000 True Az=64.83 Ze=-38.58 Az status=0009 Ze status=0008 15:34:24 Check angles 15:34:24 SkyScan query 15:34:25 SkyScan query done: ret=0 az=47.235<-3149 ze=-38.52<-14568 Statuses=0009 0008 15:34:25 Msec=3750 True Az=47.235 Ze=-38.52 Az status=0009 Ze status=0008 15:34:25 Check angles 15:34:25 SkyScan query 15:34:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:34:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:34:26 Message to Master queued w/err=0: serial=225886 error=0 15:34:31 Received message from Master: op=Filter serial=225887 15:34:31 Color wheel filter change from 0 to 0 15:34:31 FLIGetFilterPos err=0 currentPosition=0 15:34:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:31 Filter is already there-color wheel unchanged 15:34:31 Received message from Master: op=Shutter serial=225888 15:34:31 Shutter LASER close 15:34:31 Received message from Camera: op=State serial=225890 15:34:31 GetSingleValue result=40 Value=cccccccc 15:34:31 SkyScan query 15:34:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:34:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:31 Parameters OK 15:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:31 Set A/D data flow result=40 15:34:31 Set A/D channel type result=40 15:34:31 Set A/D encoding result=40 15:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:31 Set channel filter=0.000000e+000 result=40 15:34:31 Config A/D Result=40 15:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:31 Get A/D filter: -9.255963e+061 result=40 15:34:31 Get A/D value=-858993460 result=40 15:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:31 Parameters OK 15:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:31 Set A/D data flow result=40 15:34:31 Set A/D channel type result=40 15:34:31 Set A/D encoding result=40 15:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:31 Set channel filter=0.000000e+000 result=40 15:34:31 Config A/D Result=40 15:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:31 Get A/D filter: -9.255963e+061 result=40 15:34:31 Get A/D value=-858993460 result=40 15:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:31 Aux= 15:34:31 Message to Camera, serial 225890 queued 15:35:08 Received message from Master: op=PointingHead serial=225903 15:35:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:35:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:35:09 Point started: ret=0 15:35:09 point_skyscan result=0 15:35:09 Check angles 15:35:09 SkyScan query 15:35:10 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.1<-16540 Statuses=0009 0009 15:35:10 Msec=0 True Az=63.78 Ze=-68.1 Az status=0009 Ze status=0009 15:35:10 Check angles 15:35:10 SkyScan query 15:35:11 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.07<-17938 Statuses=0009 0009 15:35:11 Msec=750 True Az=81.345 Ze=-89.07 Az status=0009 Ze status=0009 15:35:11 Check angles 15:35:11 SkyScan query 15:35:11 SkyScan query done: ret=0 az=98.775<-6585 ze=-109.995<-19333 Statuses=0009 0009 15:35:11 Msec=1500 True Az=98.775 Ze=-109.995 Az status=0009 Ze status=0009 15:35:12 Check angles 15:35:12 SkyScan query 15:35:12 SkyScan query done: ret=0 az=116.13<-7742 ze=-130.965<-20731 Statuses=0009 0009 15:35:12 Msec=2250 True Az=116.13 Ze=-130.965 Az status=0009 Ze status=0009 15:35:12 Check angles 15:35:12 SkyScan query 15:35:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 15:35:13 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 15:35:13 Check angles 15:35:13 SkyScan query 15:35:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:35:14 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:35:14 Message to Master queued w/err=0: serial=225903 error=0 15:35:19 Received message from Master: op=Filter serial=225904 15:35:19 Color wheel filter change from 0 to 0 15:35:19 FLIGetFilterPos err=0 currentPosition=0 15:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:35:19 Filter is already there-color wheel unchanged 15:35:19 Received message from Master: op=Shutter serial=225905 15:35:19 Shutter LASER close 15:35:19 Received message from Camera: op=State serial=225907 15:35:19 GetSingleValue result=40 Value=cccccccc 15:35:19 SkyScan query 15:35:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:20 Parameters OK 15:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:20 Set A/D data flow result=40 15:35:20 Set A/D channel type result=40 15:35:20 Set A/D encoding result=40 15:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:20 Set channel filter=0.000000e+000 result=40 15:35:20 Config A/D Result=40 15:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:20 Get A/D filter: -9.255963e+061 result=40 15:35:20 Get A/D value=-858993460 result=40 15:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:20 Parameters OK 15:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:20 Set A/D data flow result=40 15:35:20 Set A/D channel type result=40 15:35:20 Set A/D encoding result=40 15:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:20 Set channel filter=0.000000e+000 result=40 15:35:20 Config A/D Result=40 15:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:20 Get A/D filter: -9.255963e+061 result=40 15:35:20 Get A/D value=-858993460 result=40 15:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:35:20 Aux= 15:35:20 Message to Camera, serial 225907 queued [UTC 2018-12-17 15:35:52] 15:35:56 Received message from Master: op=PointingHead serial=225920 15:35:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:35:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:35:57 Point started: ret=0 15:35:57 point_skyscan result=0 15:35:57 Check angles 15:35:57 SkyScan query 15:35:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.94<-23396 Statuses=0009 0009 15:35:58 Msec=0 True Az=113.01 Ze=-170.94 Az status=0009 Ze status=0009 15:35:58 Check angles 15:35:58 SkyScan query 15:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:35:59 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:35:59 Message to Master queued w/err=0: serial=225920 error=0 15:36:04 Received message from Master: op=Filter serial=225921 15:36:04 Color wheel filter change from 0 to 0 15:36:04 FLIGetFilterPos err=0 currentPosition=0 15:36:04 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:04 Filter is already there-color wheel unchanged 15:36:04 Received message from Master: op=Shutter serial=225922 15:36:04 Shutter LASER open 15:36:04 Received message from Camera: op=State serial=225924 15:36:04 GetSingleValue result=40 Value=cccccccc 15:36:04 SkyScan query 15:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:36:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:05 Parameters OK 15:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:05 Set A/D data flow result=40 15:36:05 Set A/D channel type result=40 15:36:05 Set A/D encoding result=40 15:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:05 Set channel filter=0.000000e+000 result=40 15:36:05 Config A/D Result=40 15:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:05 Get A/D filter: -9.255963e+061 result=40 15:36:05 Get A/D value=-858993460 result=40 15:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:05 Parameters OK 15:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:05 Set A/D data flow result=40 15:36:05 Set A/D channel type result=40 15:36:05 Set A/D encoding result=40 15:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:05 Set channel filter=0.000000e+000 result=40 15:36:05 Config A/D Result=40 15:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:05 Get A/D filter: -9.255963e+061 result=40 15:36:05 Get A/D value=-858993460 result=40 15:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:05 Aux= 15:36:05 Message to Camera, serial 225924 queued 15:36:13 Received message from Master: op=Shutter serial=225934 15:36:13 Shutter LASER close 15:36:14 Received message from Master: op=PointingHead serial=225938 15:36:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:36:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:36:14 Point started: ret=0 15:36:14 point_skyscan result=0 15:36:15 Check angles 15:36:15 SkyScan query 15:36:15 SkyScan query done: ret=0 az=136.455<-9097 ze=-142.8<-21520 Statuses=0009 0009 15:36:15 Msec=0 True Az=136.455 Ze=-142.8 Az status=0009 Ze status=0009 15:36:16 Check angles 15:36:16 SkyScan query 15:36:16 SkyScan query done: ret=0 az=153.945<-10263 ze=-121.845<-20123 Statuses=0009 0009 15:36:16 Msec=750 True Az=153.945 Ze=-121.845 Az status=0009 Ze status=0009 15:36:16 Check angles 15:36:16 SkyScan query 15:36:17 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.815<-18721 Statuses=0009 0009 15:36:17 Msec=1500 True Az=171.48 Ze=-100.815 Az status=0009 Ze status=0009 15:36:17 Check angles 15:36:17 SkyScan query 15:36:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.95<-17330 Statuses=0008 0009 15:36:18 Msec=2250 True Az=175.995 Ze=-79.95 Az status=0008 Ze status=0009 15:36:18 Check angles 15:36:18 SkyScan query 15:36:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.935<-15929 Statuses=0008 0009 15:36:18 Msec=3000 True Az=175.995 Ze=-58.935 Az status=0008 Ze status=0009 15:36:19 Check angles 15:36:19 SkyScan query 15:36:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:36:19 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:36:19 Message to Master queued w/err=0: serial=225938 error=0 15:36:24 Received message from Master: op=Filter serial=225939 15:36:24 Color wheel filter change from 0 to 0 15:36:24 FLIGetFilterPos err=0 currentPosition=0 15:36:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:24 Filter is already there-color wheel unchanged 15:36:24 Received message from Master: op=Shutter serial=225940 15:36:24 Shutter LASER close 15:36:24 Received message from Camera: op=State serial=225942 15:36:24 GetSingleValue result=40 Value=cccccccc 15:36:24 SkyScan query 15:36:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:36:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:25 Parameters OK 15:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:25 Set A/D data flow result=40 15:36:25 Set A/D channel type result=40 15:36:25 Set A/D encoding result=40 15:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:25 Set channel filter=0.000000e+000 result=40 15:36:25 Config A/D Result=40 15:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:25 Get A/D filter: -9.255963e+061 result=40 15:36:25 Get A/D value=-858993460 result=40 15:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:25 Parameters OK 15:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:25 Set A/D data flow result=40 15:36:25 Set A/D channel type result=40 15:36:25 Set A/D encoding result=40 15:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:25 Set channel filter=0.000000e+000 result=40 15:36:25 Config A/D Result=40 15:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:25 Get A/D filter: -9.255963e+061 result=40 15:36:25 Get A/D value=-858993460 result=40 15:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:25 Aux= 15:36:25 Message to Camera, serial 225942 queued 15:37:02 Received message from Master: op=PointingHead serial=225955 15:37:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:37:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:37:02 Point started: ret=0 15:37:02 point_skyscan result=0 15:37:03 Check angles 15:37:03 SkyScan query 15:37:04 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.9<-13460 Statuses=0009 0009 15:37:04 Msec=0 True Az=152.955 Ze=-21.9 Az status=0009 Ze status=0009 15:37:04 Check angles 15:37:04 SkyScan query 15:37:04 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.885<-12059 Statuses=0009 0009 15:37:04 Msec=750 True Az=135.66 Ze=-0.885 Az status=0009 Ze status=0009 15:37:05 Check angles 15:37:05 SkyScan query 15:37:05 SkyScan query done: ret=0 az=118.11<-7874 ze=20.055<-10663 Statuses=0009 0009 15:37:05 Msec=1500 True Az=118.11 Ze=20.055 Az status=0009 Ze status=0009 15:37:05 Check angles 15:37:05 SkyScan query 15:37:06 SkyScan query done: ret=0 az=100.695<-6713 ze=41.04<-9264 Statuses=0009 0009 15:37:06 Msec=2250 True Az=100.695 Ze=41.04 Az status=0009 Ze status=0009 15:37:06 Check angles 15:37:06 SkyScan query 15:37:07 SkyScan query done: ret=0 az=85.965<-5731 ze=51.555<-8563 Statuses=0009 0008 15:37:07 Msec=3000 True Az=85.965 Ze=51.555 Az status=0009 Ze status=0008 15:37:07 Check angles 15:37:07 SkyScan query 15:37:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:37:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:37:07 Message to Master queued w/err=0: serial=225955 error=0 15:37:12 Received message from Master: op=Filter serial=225956 15:37:12 Color wheel filter change from 0 to 0 15:37:12 FLIGetFilterPos err=0 currentPosition=0 15:37:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:37:12 Filter is already there-color wheel unchanged 15:37:13 Received message from Master: op=Shutter serial=225957 15:37:13 Shutter LASER close 15:37:13 Received message from Camera: op=State serial=225959 15:37:13 GetSingleValue result=40 Value=cccccccc 15:37:13 SkyScan query 15:37:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:37:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:13 Parameters OK 15:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:13 Set A/D data flow result=40 15:37:13 Set A/D channel type result=40 15:37:13 Set A/D encoding result=40 15:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:13 Set channel filter=0.000000e+000 result=40 15:37:13 Config A/D Result=40 15:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:13 Get A/D filter: -9.255963e+061 result=40 15:37:13 Get A/D value=-858993460 result=40 15:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:13 Parameters OK 15:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:13 Set A/D data flow result=40 15:37:13 Set A/D channel type result=40 15:37:13 Set A/D encoding result=40 15:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:13 Set channel filter=0.000000e+000 result=40 15:37:13 Config A/D Result=40 15:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:13 Get A/D filter: -9.255963e+061 result=40 15:37:13 Get A/D value=-858993460 result=40 15:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:37:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:37:13 Aux= 15:37:13 Message to Camera, serial 225959 queued 15:37:50 Received message from Master: op=PointingHead serial=225972 15:37:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:37:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:37:50 Point started: ret=0 15:37:50 point_skyscan result=0 15:37:51 Check angles 15:37:51 SkyScan query 15:37:52 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 15:37:52 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 15:37:52 Check angles 15:37:52 SkyScan query 15:37:52 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 15:37:52 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 15:37:53 Check angles 15:37:53 SkyScan query 15:37:53 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 15:37:53 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 15:37:53 Check angles 15:37:53 SkyScan query 15:37:54 SkyScan query done: ret=0 az=162.045<-10803 ze=38.505<-9433 Statuses=0009 0008 15:37:54 Msec=2250 True Az=162.045 Ze=38.505 Az status=0009 Ze status=0008 15:37:54 Check angles 15:37:54 SkyScan query 15:37:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:37:55 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:37:55 Check angles 15:37:55 SkyScan query 15:37:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:37:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:37:55 Message to Master queued w/err=0: serial=225972 error=0 15:38:00 Received message from Master: op=Filter serial=225973 15:38:00 Color wheel filter change from 0 to 0 15:38:00 FLIGetFilterPos err=0 currentPosition=0 15:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:00 Filter is already there-color wheel unchanged 15:38:01 Received message from Master: op=Shutter serial=225974 15:38:01 Shutter LASER close 15:38:01 Received message from Camera: op=State serial=225976 15:38:01 GetSingleValue result=40 Value=cccccccc 15:38:01 SkyScan query 15:38:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:01 Parameters OK 15:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:01 Set A/D data flow result=40 15:38:01 Set A/D channel type result=40 15:38:01 Set A/D encoding result=40 15:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:01 Set channel filter=0.000000e+000 result=40 15:38:01 Config A/D Result=40 15:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:01 Get A/D filter: -9.255963e+061 result=40 15:38:01 Get A/D value=-858993460 result=40 15:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:01 Parameters OK 15:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:01 Set A/D data flow result=40 15:38:01 Set A/D channel type result=40 15:38:01 Set A/D encoding result=40 15:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:01 Set channel filter=0.000000e+000 result=40 15:38:01 Config A/D Result=40 15:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:01 Get A/D filter: -9.255963e+061 result=40 15:38:01 Get A/D value=-858993460 result=40 15:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:01 Aux= 15:38:01 Message to Camera, serial 225976 queued 15:38:38 Received message from Master: op=PointingHead serial=225989 15:38:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:38:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:38:38 Point started: ret=0 15:38:38 point_skyscan result=0 15:38:39 Check angles 15:38:39 SkyScan query 15:38:40 SkyScan query done: ret=0 az=152.955<-10197 ze=8.685<-11421 Statuses=0009 0009 15:38:40 Msec=0 True Az=152.955 Ze=8.685 Az status=0009 Ze status=0009 15:38:40 Check angles 15:38:40 SkyScan query 15:38:41 SkyScan query done: ret=0 az=135.555<-9037 ze=-12.24<-12816 Statuses=0009 0009 15:38:41 Msec=750 True Az=135.555 Ze=-12.24 Az status=0009 Ze status=0009 15:38:41 Check angles 15:38:41 SkyScan query 15:38:41 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.69<-14246 Statuses=0009 0009 15:38:41 Msec=1500 True Az=117.615 Ze=-33.69 Az status=0009 Ze status=0009 15:38:41 Check angles 15:38:41 SkyScan query 15:38:42 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.555<-15437 Statuses=0009 0009 15:38:42 Msec=2250 True Az=100.245 Ze=-51.555 Az status=0009 Ze status=0009 15:38:42 Check angles 15:38:42 SkyScan query 15:38:43 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:38:43 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:38:43 Check angles 15:38:43 SkyScan query 15:38:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:38:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:38:44 Message to Master queued w/err=0: serial=225989 error=0 15:38:49 Received message from Master: op=Filter serial=225990 15:38:49 Color wheel filter change from 0 to 0 15:38:49 FLIGetFilterPos err=0 currentPosition=0 15:38:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:49 Filter is already there-color wheel unchanged 15:38:49 Received message from Master: op=Shutter serial=225991 15:38:49 Shutter LASER close 15:38:49 Received message from Camera: op=State serial=225993 15:38:49 GetSingleValue result=40 Value=cccccccc 15:38:49 SkyScan query 15:38:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:49 Parameters OK 15:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:49 Set A/D data flow result=40 15:38:49 Set A/D channel type result=40 15:38:49 Set A/D encoding result=40 15:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:49 Set channel filter=0.000000e+000 result=40 15:38:49 Config A/D Result=40 15:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:49 Get A/D filter: -9.255963e+061 result=40 15:38:49 Get A/D value=-858993460 result=40 15:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:49 Parameters OK 15:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:49 Set A/D data flow result=40 15:38:49 Set A/D channel type result=40 15:38:49 Set A/D encoding result=40 15:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:49 Set channel filter=0.000000e+000 result=40 15:38:49 Config A/D Result=40 15:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:49 Get A/D filter: -9.255963e+061 result=40 15:38:49 Get A/D value=-858993460 result=40 15:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:49 Aux= 15:38:49 Message to Camera, serial 225993 queued 15:39:26 Received message from Master: op=PointingHead serial=226006 15:39:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:39:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:39:27 Point started: ret=0 15:39:27 point_skyscan result=0 15:39:27 Check angles 15:39:27 SkyScan query 15:39:28 SkyScan query done: ret=0 az=109.47<-7298 ze=-81.825<-17455 Statuses=0009 0009 15:39:28 Msec=0 True Az=109.47 Ze=-81.825 Az status=0009 Ze status=0009 15:39:28 Check angles 15:39:28 SkyScan query 15:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 15:39:29 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 15:39:29 Check angles 15:39:29 SkyScan query 15:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 15:39:29 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 15:39:30 Check angles 15:39:30 SkyScan query 15:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 15:39:30 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 15:39:30 Check angles 15:39:30 SkyScan query 15:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.615<-23041 Statuses=0008 0009 15:39:31 Msec=3000 True Az=112.995 Ze=-165.615 Az status=0008 Ze status=0009 15:39:31 Check angles 15:39:31 SkyScan query 15:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:39:32 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:39:32 Message to Master queued w/err=0: serial=226006 error=0 15:39:37 Received message from Master: op=Filter serial=226007 15:39:37 Color wheel filter change from 0 to 0 15:39:37 FLIGetFilterPos err=0 currentPosition=0 15:39:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:37 Filter is already there-color wheel unchanged 15:39:37 Received message from Master: op=Shutter serial=226008 15:39:37 Shutter LASER open 15:39:37 Received message from Camera: op=State serial=226010 15:39:37 GetSingleValue result=40 Value=cccccccc 15:39:37 SkyScan query 15:39:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:39:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:38 Parameters OK 15:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:38 Set A/D data flow result=40 15:39:38 Set A/D channel type result=40 15:39:38 Set A/D encoding result=40 15:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:38 Set channel filter=0.000000e+000 result=40 15:39:38 Config A/D Result=40 15:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:38 Get A/D filter: -9.255963e+061 result=40 15:39:38 Get A/D value=-858993460 result=40 15:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:38 Parameters OK 15:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:38 Set A/D data flow result=40 15:39:38 Set A/D channel type result=40 15:39:38 Set A/D encoding result=40 15:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:38 Set channel filter=0.000000e+000 result=40 15:39:38 Config A/D Result=40 15:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:38 Get A/D filter: -9.255963e+061 result=40 15:39:38 Get A/D value=-858993460 result=40 15:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:38 Aux= 15:39:38 Message to Camera, serial 226010 queued 15:39:46 Received message from Master: op=Shutter serial=226020 15:39:46 Shutter LASER close 15:39:46 Received message from Master: op=PointingHead serial=226024 15:39:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:39:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:39:47 Point started: ret=0 15:39:47 point_skyscan result=0 15:39:48 Check angles 15:39:48 SkyScan query 15:39:48 SkyScan query done: ret=0 az=90.03<-6002 ze=157.365<-1509 Statuses=0009 0009 15:39:48 Msec=0 True Az=90.03 Ze=157.365 Az status=0009 Ze status=0009 15:39:48 Check angles 15:39:48 SkyScan query 15:39:49 SkyScan query done: ret=0 az=72.525<-4835 ze=136.38<-2908 Statuses=0009 0009 15:39:49 Msec=750 True Az=72.525 Ze=136.38 Az status=0009 Ze status=0009 15:39:49 Check angles 15:39:49 SkyScan query 15:39:50 SkyScan query done: ret=0 az=55.185<-3679 ze=115.47<-4302 Statuses=0009 0009 15:39:50 Msec=1500 True Az=55.185 Ze=115.47 Az status=0009 Ze status=0009 15:39:50 Check angles 15:39:50 SkyScan query 15:39:50 SkyScan query done: ret=0 az=40.98<-2732 ze=94.455<-5703 Statuses=0009 0009 15:39:50 Msec=2250 True Az=40.98 Ze=94.455 Az status=0009 Ze status=0009 15:39:51 Check angles 15:39:51 SkyScan query 15:39:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.53<-7098 Statuses=0008 0009 15:39:51 Msec=3000 True Az=40.995 Ze=73.53 Az status=0008 Ze status=0009 15:39:51 Check angles 15:39:51 SkyScan query 15:39:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 15:39:52 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 15:39:52 Check angles 15:39:52 SkyScan query 15:39:53 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 15:39:53 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 15:39:53 Message to Master queued w/err=0: serial=226024 error=0 15:39:58 Received message from Master: op=Filter serial=226025 15:39:58 Color wheel filter change from 0 to 0 15:39:58 FLIGetFilterPos err=0 currentPosition=0 15:39:58 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:58 Filter is already there-color wheel unchanged 15:39:58 Received message from Master: op=Shutter serial=226026 15:39:58 Shutter LASER close 15:39:58 Received message from Camera: op=State serial=226028 15:39:58 GetSingleValue result=40 Value=cccccccc 15:39:58 SkyScan query 15:39:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:39:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:59 Parameters OK 15:39:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:59 Set A/D data flow result=40 15:39:59 Set A/D channel type result=40 15:39:59 Set A/D encoding result=40 15:39:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:59 Set channel filter=0.000000e+000 result=40 15:39:59 Config A/D Result=40 15:39:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:59 Get A/D filter: -9.255963e+061 result=40 15:39:59 Get A/D value=-858993460 result=40 15:39:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:59 Parameters OK 15:39:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:59 Set A/D data flow result=40 15:39:59 Set A/D channel type result=40 15:39:59 Set A/D encoding result=40 15:39:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:59 Set channel filter=0.000000e+000 result=40 15:39:59 Config A/D Result=40 15:39:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:59 Get A/D filter: -9.255963e+061 result=40 15:39:59 Get A/D value=-858993460 result=40 15:39:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:59 Aux= 15:39:59 Message to Camera, serial 226028 queued 15:40:35 Received message from Master: op=PointingHead serial=226041 15:40:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:40:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:40:36 Point started: ret=0 15:40:36 point_skyscan result=0 15:40:36 Check angles 15:40:36 SkyScan query 15:40:37 SkyScan query done: ret=0 az=64.035<-4269 ze=66.525<-7565 Statuses=0009 0008 15:40:37 Msec=0 True Az=64.035 Ze=66.525 Az status=0009 Ze status=0008 15:40:37 Check angles 15:40:37 SkyScan query 15:40:38 SkyScan query done: ret=0 az=81.825<-5455 ze=66.51<-7566 Statuses=0009 0008 15:40:38 Msec=750 True Az=81.825 Ze=66.51 Az status=0009 Ze status=0008 15:40:38 Check angles 15:40:38 SkyScan query 15:40:39 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 15:40:39 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 15:40:39 Check angles 15:40:39 SkyScan query 15:40:39 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 15:40:39 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 15:40:39 Check angles 15:40:39 SkyScan query 15:40:40 SkyScan query done: ret=0 az=134.7<-8980 ze=66.495<-7567 Statuses=0009 0008 15:40:40 Msec=3000 True Az=134.7 Ze=66.495 Az status=0009 Ze status=0008 15:40:40 Check angles 15:40:40 SkyScan query 15:40:41 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 15:40:41 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 15:40:41 Check angles 15:40:41 SkyScan query 15:40:42 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:40:42 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:40:42 Message to Master queued w/err=0: serial=226041 error=0 15:40:47 Received message from Master: op=Filter serial=226042 15:40:47 Color wheel filter change from 0 to 0 15:40:47 FLIGetFilterPos err=0 currentPosition=0 15:40:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:40:47 Filter is already there-color wheel unchanged 15:40:47 Received message from Master: op=Shutter serial=226043 15:40:47 Shutter LASER close 15:40:47 Received message from Camera: op=State serial=226045 15:40:47 GetSingleValue result=40 Value=cccccccc 15:40:47 SkyScan query 15:40:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:40:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:47 Parameters OK 15:40:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:47 Set A/D data flow result=40 15:40:47 Set A/D channel type result=40 15:40:47 Set A/D encoding result=40 15:40:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:47 Set channel filter=0.000000e+000 result=40 15:40:47 Config A/D Result=40 15:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:47 Get A/D filter: -9.255963e+061 result=40 15:40:47 Get A/D value=-858993460 result=40 15:40:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:47 Parameters OK 15:40:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:47 Set A/D data flow result=40 15:40:47 Set A/D channel type result=40 15:40:47 Set A/D encoding result=40 15:40:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:47 Set channel filter=0.000000e+000 result=40 15:40:47 Config A/D Result=40 15:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:47 Get A/D filter: -9.255963e+061 result=40 15:40:47 Get A/D value=-858993460 result=40 15:40:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:40:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:40:47 Aux= 15:40:47 Message to Camera, serial 226045 queued 15:41:24 Received message from Master: op=PointingHead serial=226058 15:41:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:41:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:41:25 Point started: ret=0 15:41:25 point_skyscan result=0 15:41:25 Check angles 15:41:25 SkyScan query 15:41:26 SkyScan query done: ret=0 az=134.805<-8987 ze=36.645<-9557 Statuses=0009 0009 15:41:26 Msec=0 True Az=134.805 Ze=36.645 Az status=0009 Ze status=0009 15:41:26 Check angles 15:41:26 SkyScan query 15:41:27 SkyScan query done: ret=0 az=117.315<-7821 ze=15.72<-10952 Statuses=0009 0009 15:41:27 Msec=750 True Az=117.315 Ze=15.72 Az status=0009 Ze status=0009 15:41:27 Check angles 15:41:27 SkyScan query 15:41:27 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.265<-12351 Statuses=0009 0009 15:41:27 Msec=1500 True Az=99.945 Ze=-5.265 Az status=0009 Ze status=0009 15:41:28 Check angles 15:41:28 SkyScan query 15:41:28 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.235<-13749 Statuses=0009 0009 15:41:28 Msec=2250 True Az=82.455 Ze=-26.235 Az status=0009 Ze status=0009 15:41:28 Check angles 15:41:28 SkyScan query 15:41:29 SkyScan query done: ret=0 az=65.04<-4336 ze=-38.58<-14572 Statuses=0009 0008 15:41:29 Msec=3000 True Az=65.04 Ze=-38.58 Az status=0009 Ze status=0008 15:41:29 Check angles 15:41:29 SkyScan query 15:41:30 SkyScan query done: ret=0 az=47.61<-3174 ze=-38.52<-14568 Statuses=0009 0008 15:41:30 Msec=3750 True Az=47.61 Ze=-38.52 Az status=0009 Ze status=0008 15:41:30 Check angles 15:41:30 SkyScan query 15:41:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:41:30 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:41:30 Message to Master queued w/err=0: serial=226058 error=0 15:41:35 Received message from Master: op=Filter serial=226059 15:41:35 Color wheel filter change from 0 to 0 15:41:35 FLIGetFilterPos err=0 currentPosition=0 15:41:35 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:35 Filter is already there-color wheel unchanged 15:41:36 Received message from Master: op=Shutter serial=226060 15:41:36 Shutter LASER close 15:41:36 Received message from Camera: op=State serial=226062 15:41:36 GetSingleValue result=40 Value=cccccccc 15:41:36 SkyScan query 15:41:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:41:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:36 Parameters OK 15:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:36 Set A/D data flow result=40 15:41:36 Set A/D channel type result=40 15:41:36 Set A/D encoding result=40 15:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:36 Set channel filter=0.000000e+000 result=40 15:41:36 Config A/D Result=40 15:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:36 Get A/D filter: -9.255963e+061 result=40 15:41:36 Get A/D value=-858993460 result=40 15:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:36 Parameters OK 15:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:36 Set A/D data flow result=40 15:41:36 Set A/D channel type result=40 15:41:36 Set A/D encoding result=40 15:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:36 Set channel filter=0.000000e+000 result=40 15:41:36 Config A/D Result=40 15:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:36 Get A/D filter: -9.255963e+061 result=40 15:41:36 Get A/D value=-858993460 result=40 15:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:36 Aux= 15:41:36 Message to Camera, serial 226062 queued 15:42:12 Received message from Master: op=PointingHead serial=226074 15:42:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:42:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:42:12 Point started: ret=0 15:42:12 point_skyscan result=0 15:42:13 Check angles 15:42:13 SkyScan query 15:42:14 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.085<-16539 Statuses=0009 0009 15:42:14 Msec=0 True Az=63.78 Ze=-68.085 Az status=0009 Ze status=0009 15:42:14 Check angles 15:42:14 SkyScan query 15:42:15 SkyScan query done: ret=0 az=81.165<-5411 ze=-89.07<-17938 Statuses=0009 0009 15:42:15 Msec=750 True Az=81.165 Ze=-89.07 Az status=0009 Ze status=0009 15:42:15 Check angles 15:42:15 SkyScan query 15:42:15 SkyScan query done: ret=0 az=98.745<-6583 ze=-109.98<-19332 Statuses=0009 0009 15:42:15 Msec=1500 True Az=98.745 Ze=-109.98 Az status=0009 Ze status=0009 15:42:15 Check angles 15:42:15 SkyScan query 15:42:16 SkyScan query done: ret=0 az=116.07<-7738 ze=-130.965<-20731 Statuses=0009 0009 15:42:16 Msec=2250 True Az=116.07 Ze=-130.965 Az status=0009 Ze status=0009 15:42:16 Check angles 15:42:16 SkyScan query 15:42:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 15:42:17 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 15:42:17 Check angles 15:42:17 SkyScan query 15:42:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:42:18 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:42:18 Message to Master queued w/err=0: serial=226074 error=0 15:42:23 Received message from Master: op=Filter serial=226075 15:42:23 Color wheel filter change from 0 to 0 15:42:23 FLIGetFilterPos err=0 currentPosition=0 15:42:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:42:23 Filter is already there-color wheel unchanged 15:42:23 Received message from Master: op=Shutter serial=226076 15:42:23 Shutter LASER close 15:42:23 Received message from Camera: op=State serial=226078 15:42:23 GetSingleValue result=40 Value=cccccccc 15:42:23 SkyScan query 15:42:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:42:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:23 Parameters OK 15:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:23 Set A/D data flow result=40 15:42:23 Set A/D channel type result=40 15:42:23 Set A/D encoding result=40 15:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:23 Set channel filter=0.000000e+000 result=40 15:42:23 Config A/D Result=40 15:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:23 Get A/D filter: -9.255963e+061 result=40 15:42:23 Get A/D value=-858993460 result=40 15:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:23 Parameters OK 15:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:23 Set A/D data flow result=40 15:42:23 Set A/D channel type result=40 15:42:23 Set A/D encoding result=40 15:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:23 Set channel filter=0.000000e+000 result=40 15:42:23 Config A/D Result=40 15:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:23 Get A/D filter: -9.255963e+061 result=40 15:42:23 Get A/D value=-858993460 result=40 15:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:42:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:42:23 Aux= 15:42:23 Message to Camera, serial 226078 queued 15:43:00 Received message from Master: op=PointingHead serial=226091 15:43:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:43:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:43:00 Point started: ret=0 15:43:00 point_skyscan result=0 15:43:01 Check angles 15:43:01 SkyScan query 15:43:02 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 15:43:02 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 15:43:02 Check angles 15:43:02 SkyScan query 15:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:43:03 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:43:03 Message to Master queued w/err=0: serial=226091 error=0 15:43:08 Received message from Master: op=Filter serial=226092 15:43:08 Color wheel filter change from 0 to 0 15:43:08 FLIGetFilterPos err=0 currentPosition=0 15:43:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:43:08 Filter is already there-color wheel unchanged 15:43:08 Received message from Master: op=Shutter serial=226093 15:43:08 Shutter LASER open 15:43:08 Received message from Camera: op=State serial=226095 15:43:08 GetSingleValue result=40 Value=cccccccc 15:43:08 SkyScan query 15:43:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:43:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:09 Parameters OK 15:43:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:09 Set A/D data flow result=40 15:43:09 Set A/D channel type result=40 15:43:09 Set A/D encoding result=40 15:43:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:09 Set channel filter=0.000000e+000 result=40 15:43:09 Config A/D Result=40 15:43:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:09 Get A/D filter: -9.255963e+061 result=40 15:43:09 Get A/D value=-858993460 result=40 15:43:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:09 Parameters OK 15:43:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:09 Set A/D data flow result=40 15:43:09 Set A/D channel type result=40 15:43:09 Set A/D encoding result=40 15:43:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:09 Set channel filter=0.000000e+000 result=40 15:43:09 Config A/D Result=40 15:43:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:09 Get A/D filter: -9.255963e+061 result=40 15:43:09 Get A/D value=-858993460 result=40 15:43:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:43:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:43:09 Aux= 15:43:09 Message to Camera, serial 226095 queued 15:43:17 Received message from Master: op=Shutter serial=226105 15:43:17 Shutter LASER close 15:43:17 Received message from Master: op=PointingHead serial=226109 15:43:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:43:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:43:18 Point started: ret=0 15:43:18 point_skyscan result=0 15:43:19 Check angles 15:43:19 SkyScan query 15:43:19 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.785<-21519 Statuses=0009 0009 15:43:19 Msec=0 True Az=136.395 Ze=-142.785 Az status=0009 Ze status=0009 15:43:19 Check angles 15:43:19 SkyScan query 15:43:20 SkyScan query done: ret=0 az=153.93<-10262 ze=-121.83<-20122 Statuses=0009 0009 15:43:20 Msec=750 True Az=153.93 Ze=-121.83 Az status=0009 Ze status=0009 15:43:20 Check angles 15:43:20 SkyScan query 15:43:21 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.8<-18720 Statuses=0009 0009 15:43:21 Msec=1500 True Az=171.36 Ze=-100.8 Az status=0009 Ze status=0009 15:43:21 Check angles 15:43:21 SkyScan query 15:43:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.935<-17329 Statuses=0008 0009 15:43:21 Msec=2250 True Az=176.01 Ze=-79.935 Az status=0008 Ze status=0009 15:43:22 Check angles 15:43:22 SkyScan query 15:43:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.95<-15930 Statuses=0008 0009 15:43:22 Msec=3000 True Az=175.995 Ze=-58.95 Az status=0008 Ze status=0009 15:43:22 Check angles 15:43:22 SkyScan query 15:43:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:43:23 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:43:23 Message to Master queued w/err=0: serial=226109 error=0 15:43:28 Received message from Master: op=Filter serial=226110 15:43:28 Color wheel filter change from 0 to 0 15:43:28 FLIGetFilterPos err=0 currentPosition=0 15:43:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:43:28 Filter is already there-color wheel unchanged 15:43:28 Received message from Master: op=Shutter serial=226111 15:43:28 Shutter LASER close 15:43:28 Received message from Camera: op=State serial=226113 15:43:28 GetSingleValue result=40 Value=cccccccc 15:43:28 SkyScan query 15:43:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:43:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:29 Parameters OK 15:43:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:29 Set A/D data flow result=40 15:43:29 Set A/D channel type result=40 15:43:29 Set A/D encoding result=40 15:43:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:29 Set channel filter=0.000000e+000 result=40 15:43:29 Config A/D Result=40 15:43:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:29 Get A/D filter: -9.255963e+061 result=40 15:43:29 Get A/D value=-858993460 result=40 15:43:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:29 Parameters OK 15:43:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:29 Set A/D data flow result=40 15:43:29 Set A/D channel type result=40 15:43:29 Set A/D encoding result=40 15:43:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:29 Set channel filter=0.000000e+000 result=40 15:43:29 Config A/D Result=40 15:43:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:29 Get A/D filter: -9.255963e+061 result=40 15:43:29 Get A/D value=-858993460 result=40 15:43:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:43:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:43:29 Aux= 15:43:29 Message to Camera, serial 226113 queued 15:44:06 Received message from Master: op=PointingHead serial=226126 15:44:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:44:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:44:06 Point started: ret=0 15:44:06 point_skyscan result=0 15:44:07 Check angles 15:44:07 SkyScan query 15:44:07 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.765<-13451 Statuses=0009 0009 15:44:07 Msec=0 True Az=152.97 Ze=-21.765 Az status=0009 Ze status=0009 15:44:08 Check angles 15:44:08 SkyScan query 15:44:08 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.315<-12021 Statuses=0009 0009 15:44:08 Msec=750 True Az=135.09 Ze=-0.315 Az status=0009 Ze status=0009 15:44:08 Check angles 15:44:08 SkyScan query 15:44:09 SkyScan query done: ret=0 az=117.15<-7810 ze=21.075<-10595 Statuses=0009 0009 15:44:09 Msec=1500 True Az=117.15 Ze=21.075 Az status=0009 Ze status=0009 15:44:09 Check angles 15:44:09 SkyScan query 15:44:10 SkyScan query done: ret=0 az=99.735<-6649 ze=42.03<-9198 Statuses=0009 0009 15:44:10 Msec=2250 True Az=99.735 Ze=42.03 Az status=0009 Ze status=0009 15:44:10 Check angles 15:44:10 SkyScan query 15:44:10 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 15:44:10 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 15:44:11 Check angles 15:44:11 SkyScan query 15:44:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:44:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:44:11 Message to Master queued w/err=0: serial=226126 error=0 15:44:16 Received message from Master: op=Filter serial=226127 15:44:16 Color wheel filter change from 0 to 0 15:44:16 FLIGetFilterPos err=0 currentPosition=0 15:44:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:44:16 Filter is already there-color wheel unchanged 15:44:16 Received message from Master: op=Shutter serial=226128 15:44:16 Shutter LASER close 15:44:16 Received message from Camera: op=State serial=226130 15:44:16 GetSingleValue result=40 Value=cccccccc 15:44:16 SkyScan query 15:44:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:44:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:17 Parameters OK 15:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:17 Set A/D data flow result=40 15:44:17 Set A/D channel type result=40 15:44:17 Set A/D encoding result=40 15:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:17 Set channel filter=0.000000e+000 result=40 15:44:17 Config A/D Result=40 15:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:17 Get A/D filter: -9.255963e+061 result=40 15:44:17 Get A/D value=-858993460 result=40 15:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:17 Parameters OK 15:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:17 Set A/D data flow result=40 15:44:17 Set A/D channel type result=40 15:44:17 Set A/D encoding result=40 15:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:17 Set channel filter=0.000000e+000 result=40 15:44:17 Config A/D Result=40 15:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:17 Get A/D filter: -9.255963e+061 result=40 15:44:17 Get A/D value=-858993460 result=40 15:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:17 Aux= 15:44:17 Message to Camera, serial 226130 queued 15:44:54 Received message from Master: op=PointingHead serial=226143 15:44:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:44:54 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:44:54 Point started: ret=0 15:44:54 point_skyscan result=0 15:44:55 Check angles 15:44:55 SkyScan query 15:44:55 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 15:44:55 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 15:44:56 Check angles 15:44:56 SkyScan query 15:44:56 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 15:44:56 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 15:44:56 Check angles 15:44:56 SkyScan query 15:44:57 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 15:44:57 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 15:44:57 Check angles 15:44:57 SkyScan query 15:44:58 SkyScan query done: ret=0 az=161.1<-10740 ze=38.505<-9433 Statuses=0009 0008 15:44:58 Msec=2250 True Az=161.1 Ze=38.505 Az status=0009 Ze status=0008 15:44:58 Check angles 15:44:58 SkyScan query 15:44:58 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:44:58 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:44:59 Check angles 15:44:59 SkyScan query 15:44:59 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:44:59 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:44:59 Message to Master queued w/err=0: serial=226143 error=0 15:45:04 Received message from Master: op=Filter serial=226144 15:45:04 Color wheel filter change from 0 to 0 15:45:04 FLIGetFilterPos err=0 currentPosition=0 15:45:04 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:04 Filter is already there-color wheel unchanged 15:45:04 Received message from Master: op=Shutter serial=226145 15:45:04 Shutter LASER close 15:45:04 Received message from Camera: op=State serial=226147 15:45:04 GetSingleValue result=40 Value=cccccccc 15:45:04 SkyScan query 15:45:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:45:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:05 Parameters OK 15:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:05 Set A/D data flow result=40 15:45:05 Set A/D channel type result=40 15:45:05 Set A/D encoding result=40 15:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:05 Set channel filter=0.000000e+000 result=40 15:45:05 Config A/D Result=40 15:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:05 Get A/D filter: -9.255963e+061 result=40 15:45:05 Get A/D value=-858993460 result=40 15:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:05 Parameters OK 15:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:05 Set A/D data flow result=40 15:45:05 Set A/D channel type result=40 15:45:05 Set A/D encoding result=40 15:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:05 Set channel filter=0.000000e+000 result=40 15:45:05 Config A/D Result=40 15:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:05 Get A/D filter: -9.255963e+061 result=40 15:45:05 Get A/D value=-858993460 result=40 15:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:05 Aux= 15:45:05 Message to Camera, serial 226147 queued 15:45:27 Received message from Master: op=Identify serial=226148 15:45:41 Received message from Master: op=PointingHead serial=226162 15:45:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:45:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:45:41 Point started: ret=0 15:45:41 point_skyscan result=0 15:45:42 Check angles 15:45:42 SkyScan query 15:45:43 SkyScan query done: ret=0 az=152.595<-10173 ze=8.115<-11459 Statuses=0009 0009 15:45:43 Msec=0 True Az=152.595 Ze=8.115 Az status=0009 Ze status=0009 15:45:43 Check angles 15:45:43 SkyScan query 15:45:43 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.81<-12854 Statuses=0009 0009 15:45:43 Msec=750 True Az=135.12 Ze=-12.81 Az status=0009 Ze status=0009 15:45:44 Check angles 15:45:44 SkyScan query 15:45:44 SkyScan query done: ret=0 az=117.195<-7813 ze=-34.23<-14282 Statuses=0009 0009 15:45:44 Msec=1500 True Az=117.195 Ze=-34.23 Az status=0009 Ze status=0009 15:45:44 Check angles [UTC 2018-12-17 15:45:44] 15:45:44 SkyScan query 15:45:45 SkyScan query done: ret=0 az=98.25<-6550 ze=-51.555<-15437 Statuses=0009 0009 15:45:45 Msec=2250 True Az=98.25 Ze=-51.555 Az status=0009 Ze status=0009 15:45:45 Check angles 15:45:45 SkyScan query 15:45:46 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:45:46 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:45:46 Check angles 15:45:46 SkyScan query 15:45:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:45:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:45:46 Message to Master queued w/err=0: serial=226162 error=0 15:45:51 Received message from Master: op=Filter serial=226163 15:45:51 Color wheel filter change from 0 to 0 15:45:51 FLIGetFilterPos err=0 currentPosition=0 15:45:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:51 Filter is already there-color wheel unchanged 15:45:52 Received message from Master: op=Shutter serial=226164 15:45:52 Shutter LASER close 15:45:52 Received message from Camera: op=State serial=226166 15:45:52 GetSingleValue result=40 Value=cccccccc 15:45:52 SkyScan query 15:45:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:45:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:52 Parameters OK 15:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:52 Set A/D data flow result=40 15:45:52 Set A/D channel type result=40 15:45:52 Set A/D encoding result=40 15:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:52 Set channel filter=0.000000e+000 result=40 15:45:52 Config A/D Result=40 15:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:52 Get A/D filter: -9.255963e+061 result=40 15:45:52 Get A/D value=-858993460 result=40 15:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:52 Parameters OK 15:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:52 Set A/D data flow result=40 15:45:52 Set A/D channel type result=40 15:45:52 Set A/D encoding result=40 15:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:52 Set channel filter=0.000000e+000 result=40 15:45:52 Config A/D Result=40 15:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:52 Get A/D filter: -9.255963e+061 result=40 15:45:52 Get A/D value=-858993460 result=40 15:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:52 Aux= 15:45:52 Message to Camera, serial 226166 queued 15:46:29 Received message from Master: op=PointingHead serial=226179 15:46:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:46:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:46:29 Point started: ret=0 15:46:29 point_skyscan result=0 15:46:30 Check angles 15:46:30 SkyScan query 15:46:31 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.315<-17421 Statuses=0009 0009 15:46:31 Msec=0 True Az=109.035 Ze=-81.315 Az status=0009 Ze status=0009 15:46:31 Check angles 15:46:31 SkyScan query 15:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.285<-18819 Statuses=0008 0009 15:46:31 Msec=750 True Az=112.995 Ze=-102.285 Az status=0008 Ze status=0009 15:46:32 Check angles 15:46:32 SkyScan query 15:46:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 15:46:32 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 15:46:32 Check angles 15:46:32 SkyScan query 15:46:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 15:46:33 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 15:46:33 Check angles 15:46:33 SkyScan query 15:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 15:46:34 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 15:46:34 Check angles 15:46:34 SkyScan query 15:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:46:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:46:34 Message to Master queued w/err=0: serial=226179 error=0 15:46:40 Received message from Master: op=Filter serial=226180 15:46:40 Color wheel filter change from 0 to 0 15:46:40 FLIGetFilterPos err=0 currentPosition=0 15:46:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:46:40 Filter is already there-color wheel unchanged 15:46:40 Received message from Master: op=Shutter serial=226181 15:46:40 Shutter LASER open 15:46:40 Received message from Camera: op=State serial=226183 15:46:40 GetSingleValue result=40 Value=cccccccc 15:46:40 SkyScan query 15:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:40 Parameters OK 15:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:40 Set A/D data flow result=40 15:46:40 Set A/D channel type result=40 15:46:40 Set A/D encoding result=40 15:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:40 Set channel filter=0.000000e+000 result=40 15:46:40 Config A/D Result=40 15:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:40 Get A/D filter: -9.255963e+061 result=40 15:46:40 Get A/D value=-858993460 result=40 15:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:40 Parameters OK 15:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:40 Set A/D data flow result=40 15:46:40 Set A/D channel type result=40 15:46:40 Set A/D encoding result=40 15:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:40 Set channel filter=0.000000e+000 result=40 15:46:40 Config A/D Result=40 15:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:40 Get A/D filter: -9.255963e+061 result=40 15:46:40 Get A/D value=-858993460 result=40 15:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:46:40 Aux= 15:46:40 Message to Camera, serial 226183 queued 15:46:49 Received message from Master: op=Shutter serial=226193 15:46:49 Shutter LASER close 15:46:49 Received message from Master: op=PointingHead serial=226197 15:46:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:46:49 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:46:50 Point started: ret=0 15:46:50 point_skyscan result=0 15:46:50 Check angles 15:46:50 SkyScan query 15:46:51 SkyScan query done: ret=0 az=89.865<-5991 ze=157.245<-1517 Statuses=0009 0009 15:46:51 Msec=0 True Az=89.865 Ze=157.245 Az status=0009 Ze status=0009 15:46:51 Check angles 15:46:51 SkyScan query 15:46:52 SkyScan query done: ret=0 az=72.495<-4833 ze=136.275<-2915 Statuses=0009 0009 15:46:52 Msec=750 True Az=72.495 Ze=136.275 Az status=0009 Ze status=0009 15:46:52 Check angles 15:46:52 SkyScan query 15:46:53 SkyScan query done: ret=0 az=55.155<-3677 ze=115.35<-4310 Statuses=0009 0009 15:46:53 Msec=1500 True Az=55.155 Ze=115.35 Az status=0009 Ze status=0009 15:46:53 Check angles 15:46:53 SkyScan query 15:46:53 SkyScan query done: ret=0 az=40.995<-2733 ze=94.35<-5710 Statuses=0009 0009 15:46:53 Msec=2250 True Az=40.995 Ze=94.35 Az status=0009 Ze status=0009 15:46:53 Check angles 15:46:53 SkyScan query 15:46:54 SkyScan query done: ret=0 az=40.995<-2733 ze=73.395<-7107 Statuses=0008 0009 15:46:54 Msec=3000 True Az=40.995 Ze=73.395 Az status=0008 Ze status=0009 15:46:54 Check angles 15:46:54 SkyScan query 15:46:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 15:46:55 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 15:46:55 Check angles 15:46:55 SkyScan query 15:46:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:46:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:46:56 Message to Master queued w/err=0: serial=226197 error=0 15:47:01 Received message from Master: op=Filter serial=226198 15:47:01 Color wheel filter change from 0 to 0 15:47:01 FLIGetFilterPos err=0 currentPosition=0 15:47:01 FLIGetStepsRemaining err=0 RemainingSteps=0 15:47:01 Filter is already there-color wheel unchanged 15:47:01 Received message from Master: op=Shutter serial=226199 15:47:01 Shutter LASER close 15:47:01 Received message from Camera: op=State serial=226201 15:47:01 GetSingleValue result=40 Value=cccccccc 15:47:01 SkyScan query 15:47:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:47:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:01 Parameters OK 15:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:01 Set A/D data flow result=40 15:47:01 Set A/D channel type result=40 15:47:01 Set A/D encoding result=40 15:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:01 Set channel filter=0.000000e+000 result=40 15:47:01 Config A/D Result=40 15:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:01 Get A/D filter: -9.255963e+061 result=40 15:47:01 Get A/D value=-858993460 result=40 15:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:01 Parameters OK 15:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:01 Set A/D data flow result=40 15:47:01 Set A/D channel type result=40 15:47:01 Set A/D encoding result=40 15:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:01 Set channel filter=0.000000e+000 result=40 15:47:01 Config A/D Result=40 15:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:01 Get A/D filter: -9.255963e+061 result=40 15:47:01 Get A/D value=-858993460 result=40 15:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:47:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:47:01 Aux= 15:47:01 Message to Camera, serial 226201 queued 15:47:38 Received message from Master: op=PointingHead serial=226214 15:47:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:47:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:47:39 Point started: ret=0 15:47:39 point_skyscan result=0 15:47:39 Check angles 15:47:39 SkyScan query 15:47:40 SkyScan query done: ret=0 az=63.84<-4256 ze=66.54<-7564 Statuses=0009 0008 15:47:40 Msec=0 True Az=63.84 Ze=66.54 Az status=0009 Ze status=0008 15:47:40 Check angles 15:47:40 SkyScan query 15:47:41 SkyScan query done: ret=0 az=81.645<-5443 ze=66.51<-7566 Statuses=0009 0008 15:47:41 Msec=750 True Az=81.645 Ze=66.51 Az status=0009 Ze status=0008 15:47:41 Check angles 15:47:41 SkyScan query 15:47:41 SkyScan query done: ret=0 az=99.195<-6613 ze=66.495<-7567 Statuses=0009 0008 15:47:41 Msec=1500 True Az=99.195 Ze=66.495 Az status=0009 Ze status=0008 15:47:42 Check angles 15:47:42 SkyScan query 15:47:42 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 15:47:42 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 15:47:42 Check angles 15:47:42 SkyScan query 15:47:43 SkyScan query done: ret=0 az=134.49<-8966 ze=66.495<-7567 Statuses=0009 0008 15:47:43 Msec=3000 True Az=134.49 Ze=66.495 Az status=0009 Ze status=0008 15:47:43 Check angles 15:47:43 SkyScan query 15:47:44 SkyScan query done: ret=0 az=151.86<-10124 ze=66.495<-7567 Statuses=0009 0008 15:47:44 Msec=3750 True Az=151.86 Ze=66.495 Az status=0009 Ze status=0008 15:47:44 Check angles 15:47:44 SkyScan query 15:47:44 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:47:44 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:47:44 Message to Master queued w/err=0: serial=226214 error=0 15:47:49 Received message from Master: op=Filter serial=226215 15:47:49 Color wheel filter change from 0 to 0 15:47:49 FLIGetFilterPos err=0 currentPosition=0 15:47:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:47:49 Filter is already there-color wheel unchanged 15:47:50 Received message from Master: op=Shutter serial=226216 15:47:50 Shutter LASER close 15:47:50 Received message from Camera: op=State serial=226218 15:47:50 GetSingleValue result=40 Value=cccccccc 15:47:50 SkyScan query 15:47:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:47:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:50 Parameters OK 15:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:50 Set A/D data flow result=40 15:47:50 Set A/D channel type result=40 15:47:50 Set A/D encoding result=40 15:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:50 Set channel filter=0.000000e+000 result=40 15:47:50 Config A/D Result=40 15:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:50 Get A/D filter: -9.255963e+061 result=40 15:47:50 Get A/D value=-858993460 result=40 15:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:50 Parameters OK 15:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:50 Set A/D data flow result=40 15:47:50 Set A/D channel type result=40 15:47:50 Set A/D encoding result=40 15:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:50 Set channel filter=0.000000e+000 result=40 15:47:50 Config A/D Result=40 15:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:50 Get A/D filter: -9.255963e+061 result=40 15:47:50 Get A/D value=-858993460 result=40 15:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:47:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:47:50 Aux= 15:47:50 Message to Camera, serial 226218 queued 15:48:27 Received message from Master: op=PointingHead serial=226231 15:48:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:48:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:48:27 Point started: ret=0 15:48:27 point_skyscan result=0 15:48:28 Check angles 15:48:28 SkyScan query 15:48:29 SkyScan query done: ret=0 az=134.805<-8987 ze=36.63<-9558 Statuses=0009 0009 15:48:29 Msec=0 True Az=134.805 Ze=36.63 Az status=0009 Ze status=0009 15:48:29 Check angles 15:48:29 SkyScan query 15:48:30 SkyScan query done: ret=0 az=117.315<-7821 ze=15.705<-10953 Statuses=0009 0009 15:48:30 Msec=750 True Az=117.315 Ze=15.705 Az status=0009 Ze status=0009 15:48:30 Check angles 15:48:30 SkyScan query 15:48:30 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.76<-12384 Statuses=0009 0009 15:48:30 Msec=1500 True Az=99.66 Ze=-5.76 Az status=0009 Ze status=0009 15:48:30 Check angles 15:48:30 SkyScan query 15:48:31 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.165<-13811 Statuses=0009 0009 15:48:31 Msec=2250 True Az=81.81 Ze=-27.165 Az status=0009 Ze status=0009 15:48:31 Check angles 15:48:31 SkyScan query 15:48:32 SkyScan query done: ret=0 az=64.245<-4283 ze=-38.58<-14572 Statuses=0009 0008 15:48:32 Msec=3000 True Az=64.245 Ze=-38.58 Az status=0009 Ze status=0008 15:48:32 Check angles 15:48:32 SkyScan query 15:48:33 SkyScan query done: ret=0 az=46.8<-3120 ze=-38.52<-14568 Statuses=0009 0008 15:48:33 Msec=3750 True Az=46.8 Ze=-38.52 Az status=0009 Ze status=0008 15:48:33 Check angles 15:48:33 SkyScan query 15:48:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:48:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:48:33 Message to Master queued w/err=0: serial=226231 error=0 15:48:38 Received message from Master: op=Filter serial=226232 15:48:38 Color wheel filter change from 0 to 0 15:48:38 FLIGetFilterPos err=0 currentPosition=0 15:48:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:38 Filter is already there-color wheel unchanged 15:48:38 Received message from Master: op=Shutter serial=226233 15:48:38 Shutter LASER close 15:48:39 Received message from Camera: op=State serial=226235 15:48:39 GetSingleValue result=40 Value=cccccccc 15:48:39 SkyScan query 15:48:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:48:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:39 Parameters OK 15:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:39 Set A/D data flow result=40 15:48:39 Set A/D channel type result=40 15:48:39 Set A/D encoding result=40 15:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:39 Set channel filter=0.000000e+000 result=40 15:48:39 Config A/D Result=40 15:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:39 Get A/D filter: -9.255963e+061 result=40 15:48:39 Get A/D value=-858993460 result=40 15:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:39 Parameters OK 15:48:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:39 Set A/D data flow result=40 15:48:39 Set A/D channel type result=40 15:48:39 Set A/D encoding result=40 15:48:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:39 Set channel filter=0.000000e+000 result=40 15:48:39 Config A/D Result=40 15:48:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:39 Get A/D filter: -9.255963e+061 result=40 15:48:39 Get A/D value=-858993460 result=40 15:48:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:39 Aux= 15:48:39 Message to Camera, serial 226235 queued 15:49:16 Received message from Master: op=PointingHead serial=226248 15:49:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:49:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:49:16 Point started: ret=0 15:49:16 point_skyscan result=0 15:49:17 Check angles 15:49:17 SkyScan query 15:49:18 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.58<-16572 Statuses=0009 0009 15:49:18 Msec=0 True Az=64.23 Ze=-68.58 Az status=0009 Ze status=0009 15:49:18 Check angles 15:49:18 SkyScan query 15:49:18 SkyScan query done: ret=0 az=81.705<-5447 ze=-89.565<-17971 Statuses=0009 0009 15:49:18 Msec=750 True Az=81.705 Ze=-89.565 Az status=0009 Ze status=0009 15:49:19 Check angles 15:49:19 SkyScan query 15:49:19 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.52<-19368 Statuses=0009 0009 15:49:19 Msec=1500 True Az=99.165 Ze=-110.52 Az status=0009 Ze status=0009 15:49:19 Check angles 15:49:19 SkyScan query 15:49:20 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.88<-20792 Statuses=0009 0009 15:49:20 Msec=2250 True Az=117.09 Ze=-131.88 Az status=0009 Ze status=0009 15:49:20 Check angles 15:49:20 SkyScan query 15:49:21 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 15:49:21 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 15:49:21 Check angles 15:49:21 SkyScan query 15:49:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:49:21 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:49:21 Message to Master queued w/err=0: serial=226248 error=0 15:49:26 Received message from Master: op=Filter serial=226249 15:49:26 Color wheel filter change from 0 to 0 15:49:26 FLIGetFilterPos err=0 currentPosition=0 15:49:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:49:26 Filter is already there-color wheel unchanged 15:49:27 Received message from Master: op=Shutter serial=226250 15:49:27 Shutter LASER close 15:49:27 Received message from Camera: op=State serial=226252 15:49:27 GetSingleValue result=40 Value=cccccccc 15:49:27 SkyScan query 15:49:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:49:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:27 Parameters OK 15:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:27 Set A/D data flow result=40 15:49:27 Set A/D channel type result=40 15:49:27 Set A/D encoding result=40 15:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:27 Set channel filter=0.000000e+000 result=40 15:49:27 Config A/D Result=40 15:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:27 Get A/D filter: -9.255963e+061 result=40 15:49:27 Get A/D value=-858993460 result=40 15:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:27 Parameters OK 15:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:27 Set A/D data flow result=40 15:49:27 Set A/D channel type result=40 15:49:27 Set A/D encoding result=40 15:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:27 Set channel filter=0.000000e+000 result=40 15:49:27 Config A/D Result=40 15:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:27 Get A/D filter: -9.255963e+061 result=40 15:49:27 Get A/D value=-858993460 result=40 15:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:49:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:49:27 Aux= 15:49:27 Message to Camera, serial 226252 queued 15:50:04 Received message from Master: op=PointingHead serial=226265 15:50:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:50:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:50:04 Point started: ret=0 15:50:04 point_skyscan result=0 15:50:05 Check angles 15:50:05 SkyScan query 15:50:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 15:50:06 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 15:50:06 Check angles 15:50:06 SkyScan query 15:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:50:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:50:06 Message to Master queued w/err=0: serial=226265 error=0 15:50:11 Received message from Master: op=Filter serial=226266 15:50:11 Color wheel filter change from 0 to 0 15:50:11 FLIGetFilterPos err=0 currentPosition=0 15:50:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:50:11 Filter is already there-color wheel unchanged 15:50:12 Received message from Master: op=Shutter serial=226267 15:50:12 Shutter LASER open 15:50:12 Received message from Camera: op=State serial=226269 15:50:12 GetSingleValue result=40 Value=cccccccc 15:50:12 SkyScan query 15:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:50:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:12 Parameters OK 15:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:12 Set A/D data flow result=40 15:50:12 Set A/D channel type result=40 15:50:12 Set A/D encoding result=40 15:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:12 Set channel filter=0.000000e+000 result=40 15:50:12 Config A/D Result=40 15:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:12 Get A/D filter: -9.255963e+061 result=40 15:50:12 Get A/D value=-858993460 result=40 15:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:12 Parameters OK 15:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:12 Set A/D data flow result=40 15:50:12 Set A/D channel type result=40 15:50:12 Set A/D encoding result=40 15:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:12 Set channel filter=0.000000e+000 result=40 15:50:12 Config A/D Result=40 15:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:12 Get A/D filter: -9.255963e+061 result=40 15:50:12 Get A/D value=-858993460 result=40 15:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:50:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:50:12 Aux= 15:50:12 Message to Camera, serial 226269 queued 15:50:21 Received message from Master: op=Shutter serial=226279 15:50:21 Shutter LASER close 15:50:21 Received message from Master: op=PointingHead serial=226283 15:50:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:50:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:50:22 Point started: ret=0 15:50:22 point_skyscan result=0 15:50:23 Check angles 15:50:23 SkyScan query 15:50:23 SkyScan query done: ret=0 az=135.87<-9058 ze=-143.415<-21561 Statuses=0009 0009 15:50:23 Msec=0 True Az=135.87 Ze=-143.415 Az status=0009 Ze status=0009 15:50:23 Check angles 15:50:23 SkyScan query 15:50:24 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.43<-20162 Statuses=0009 0009 15:50:24 Msec=750 True Az=153.39 Ze=-122.43 Az status=0009 Ze status=0009 15:50:24 Check angles 15:50:24 SkyScan query 15:50:25 SkyScan query done: ret=0 az=170.865<-11391 ze=-101.535<-18769 Statuses=0009 0009 15:50:25 Msec=1500 True Az=170.865 Ze=-101.535 Az status=0009 Ze status=0009 15:50:25 Check angles 15:50:25 SkyScan query 15:50:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.145<-17343 Statuses=0008 0009 15:50:25 Msec=2250 True Az=175.995 Ze=-80.145 Az status=0008 Ze status=0009 15:50:26 Check angles 15:50:26 SkyScan query 15:50:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.145<-15943 Statuses=0008 0009 15:50:26 Msec=3000 True Az=175.995 Ze=-59.145 Az status=0008 Ze status=0009 15:50:26 Check angles 15:50:26 SkyScan query 15:50:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:50:27 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:50:27 Message to Master queued w/err=0: serial=226283 error=0 15:50:32 Received message from Master: op=Filter serial=226284 15:50:32 Color wheel filter change from 0 to 0 15:50:32 FLIGetFilterPos err=0 currentPosition=0 15:50:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:50:32 Filter is already there-color wheel unchanged 15:50:32 Received message from Master: op=Shutter serial=226285 15:50:32 Shutter LASER close 15:50:32 Received message from Camera: op=State serial=226287 15:50:32 GetSingleValue result=40 Value=cccccccc 15:50:32 SkyScan query 15:50:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:50:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:33 Parameters OK 15:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:33 Set A/D data flow result=40 15:50:33 Set A/D channel type result=40 15:50:33 Set A/D encoding result=40 15:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:33 Set channel filter=0.000000e+000 result=40 15:50:33 Config A/D Result=40 15:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:33 Get A/D filter: -9.255963e+061 result=40 15:50:33 Get A/D value=-858993460 result=40 15:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:33 Parameters OK 15:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:33 Set A/D data flow result=40 15:50:33 Set A/D channel type result=40 15:50:33 Set A/D encoding result=40 15:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:33 Set channel filter=0.000000e+000 result=40 15:50:33 Config A/D Result=40 15:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:33 Get A/D filter: -9.255963e+061 result=40 15:50:33 Get A/D value=-858993460 result=40 15:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:50:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:50:33 Aux= 15:50:33 Message to Camera, serial 226287 queued 15:51:10 Received message from Master: op=PointingHead serial=226300 15:51:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:51:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:51:10 Point started: ret=0 15:51:10 point_skyscan result=0 15:51:11 Check angles 15:51:11 SkyScan query 15:51:11 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.975<-13465 Statuses=0009 0009 15:51:11 Msec=0 True Az=153.105 Ze=-21.975 Az status=0009 Ze status=0009 15:51:12 Check angles 15:51:12 SkyScan query 15:51:12 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.99<-12066 Statuses=0009 0009 15:51:12 Msec=750 True Az=135.675 Ze=-0.99 Az status=0009 Ze status=0009 15:51:12 Check angles 15:51:12 SkyScan query 15:51:13 SkyScan query done: ret=0 az=118.14<-7876 ze=19.965<-10669 Statuses=0009 0009 15:51:13 Msec=1500 True Az=118.14 Ze=19.965 Az status=0009 Ze status=0009 15:51:13 Check angles 15:51:13 SkyScan query 15:51:14 SkyScan query done: ret=0 az=100.755<-6717 ze=40.92<-9272 Statuses=0009 0009 15:51:14 Msec=2250 True Az=100.755 Ze=40.92 Az status=0009 Ze status=0009 15:51:14 Check angles 15:51:14 SkyScan query 15:51:14 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 15:51:14 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 15:51:15 Check angles 15:51:15 SkyScan query 15:51:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 15:51:15 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 15:51:15 Message to Master queued w/err=0: serial=226300 error=0 15:51:20 Received message from Master: op=Filter serial=226301 15:51:20 Color wheel filter change from 0 to 0 15:51:20 FLIGetFilterPos err=0 currentPosition=0 15:51:20 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:20 Filter is already there-color wheel unchanged 15:51:20 Received message from Master: op=Shutter serial=226302 15:51:20 Shutter LASER close 15:51:20 Received message from Camera: op=State serial=226304 15:51:20 GetSingleValue result=40 Value=cccccccc 15:51:20 SkyScan query 15:51:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:51:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:21 Parameters OK 15:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:21 Set A/D data flow result=40 15:51:21 Set A/D channel type result=40 15:51:21 Set A/D encoding result=40 15:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:21 Set channel filter=0.000000e+000 result=40 15:51:21 Config A/D Result=40 15:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:21 Get A/D filter: -9.255963e+061 result=40 15:51:21 Get A/D value=-858993460 result=40 15:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:21 Parameters OK 15:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:21 Set A/D data flow result=40 15:51:21 Set A/D channel type result=40 15:51:21 Set A/D encoding result=40 15:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:21 Set channel filter=0.000000e+000 result=40 15:51:21 Config A/D Result=40 15:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:21 Get A/D filter: -9.255963e+061 result=40 15:51:21 Get A/D value=-858993460 result=40 15:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:21 Aux= 15:51:21 Message to Camera, serial 226304 queued 15:51:58 Received message from Master: op=PointingHead serial=226317 15:51:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:51:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:51:58 Point started: ret=0 15:51:58 point_skyscan result=0 15:51:59 Check angles 15:51:59 SkyScan query 15:51:59 SkyScan query done: ret=0 az=109.14<-7276 ze=38.49<-9434 Statuses=0009 0008 15:51:59 Msec=0 True Az=109.14 Ze=38.49 Az status=0009 Ze status=0008 15:52:00 Check angles 15:52:00 SkyScan query 15:52:00 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 15:52:00 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 15:52:00 Check angles 15:52:00 SkyScan query 15:52:01 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 15:52:01 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 15:52:01 Check angles 15:52:01 SkyScan query 15:52:02 SkyScan query done: ret=0 az=161.37<-10758 ze=38.505<-9433 Statuses=0009 0008 15:52:02 Msec=2250 True Az=161.37 Ze=38.505 Az status=0009 Ze status=0008 15:52:02 Check angles 15:52:02 SkyScan query 15:52:02 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:52:02 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:52:03 Check angles 15:52:03 SkyScan query 15:52:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:52:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:52:03 Message to Master queued w/err=0: serial=226317 error=0 15:52:08 Received message from Master: op=Filter serial=226318 15:52:08 Color wheel filter change from 0 to 0 15:52:08 FLIGetFilterPos err=0 currentPosition=0 15:52:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:08 Filter is already there-color wheel unchanged 15:52:08 Received message from Master: op=Shutter serial=226319 15:52:08 Shutter LASER close 15:52:08 Received message from Camera: op=State serial=226321 15:52:08 GetSingleValue result=40 Value=cccccccc 15:52:08 SkyScan query 15:52:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:52:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:09 Parameters OK 15:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:09 Set A/D data flow result=40 15:52:09 Set A/D channel type result=40 15:52:09 Set A/D encoding result=40 15:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:09 Set channel filter=0.000000e+000 result=40 15:52:09 Config A/D Result=40 15:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:09 Get A/D filter: -9.255963e+061 result=40 15:52:09 Get A/D value=-858993460 result=40 15:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:09 Parameters OK 15:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:09 Set A/D data flow result=40 15:52:09 Set A/D channel type result=40 15:52:09 Set A/D encoding result=40 15:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:09 Set channel filter=0.000000e+000 result=40 15:52:09 Config A/D Result=40 15:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:09 Get A/D filter: -9.255963e+061 result=40 15:52:09 Get A/D value=-858993460 result=40 15:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:09 Aux= 15:52:09 Message to Camera, serial 226321 queued 15:52:46 Received message from Master: op=PointingHead serial=226334 15:52:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:52:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:52:46 Point started: ret=0 15:52:46 point_skyscan result=0 15:52:47 Check angles 15:52:47 SkyScan query 15:52:47 SkyScan query done: ret=0 az=152.76<-10184 ze=8.61<-11426 Statuses=0009 0009 15:52:47 Msec=0 True Az=152.76 Ze=8.61 Az status=0009 Ze status=0009 15:52:48 Check angles 15:52:48 SkyScan query 15:52:48 SkyScan query done: ret=0 az=135.015<-9001 ze=-12.765<-12851 Statuses=0009 0009 15:52:48 Msec=750 True Az=135.015 Ze=-12.765 Az status=0009 Ze status=0009 15:52:48 Check angles 15:52:48 SkyScan query 15:52:49 SkyScan query done: ret=0 az=117.15<-7810 ze=-34.215<-14281 Statuses=0009 0009 15:52:49 Msec=1500 True Az=117.15 Ze=-34.215 Az status=0009 Ze status=0009 15:52:49 Check angles 15:52:49 SkyScan query 15:52:50 SkyScan query done: ret=0 az=99.315<-6621 ze=-51.57<-15438 Statuses=0009 0009 15:52:50 Msec=2250 True Az=99.315 Ze=-51.57 Az status=0009 Ze status=0009 15:52:50 Check angles 15:52:50 SkyScan query 15:52:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 15:52:50 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 15:52:51 Check angles 15:52:51 SkyScan query 15:52:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:52:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:52:51 Message to Master queued w/err=0: serial=226334 error=0 15:52:56 Received message from Master: op=Filter serial=226335 15:52:56 Color wheel filter change from 0 to 0 15:52:56 FLIGetFilterPos err=0 currentPosition=0 15:52:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:56 Filter is already there-color wheel unchanged 15:52:56 Received message from Master: op=Shutter serial=226336 15:52:56 Shutter LASER close 15:52:56 Received message from Camera: op=State serial=226338 15:52:56 GetSingleValue result=40 Value=cccccccc 15:52:56 SkyScan query 15:52:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:52:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:57 Parameters OK 15:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:57 Set A/D data flow result=40 15:52:57 Set A/D channel type result=40 15:52:57 Set A/D encoding result=40 15:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:57 Set channel filter=0.000000e+000 result=40 15:52:57 Config A/D Result=40 15:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:57 Get A/D filter: -9.255963e+061 result=40 15:52:57 Get A/D value=-858993460 result=40 15:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:57 Parameters OK 15:52:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:57 Set A/D data flow result=40 15:52:57 Set A/D channel type result=40 15:52:57 Set A/D encoding result=40 15:52:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:57 Set channel filter=0.000000e+000 result=40 15:52:57 Config A/D Result=40 15:52:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:57 Get A/D filter: -9.255963e+061 result=40 15:52:57 Get A/D value=-858993460 result=40 15:52:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:57 Aux= 15:52:57 Message to Camera, serial 226338 queued 15:53:34 Received message from Master: op=PointingHead serial=226351 15:53:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:53:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:53:34 Point started: ret=0 15:53:34 point_skyscan result=0 15:53:35 Check angles 15:53:35 SkyScan query 15:53:36 SkyScan query done: ret=0 az=108.75<-7250 ze=-81.075<-17405 Statuses=0009 0009 15:53:36 Msec=0 True Az=108.75 Ze=-81.075 Az status=0009 Ze status=0009 15:53:36 Check angles 15:53:36 SkyScan query 15:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 15:53:36 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 15:53:36 Check angles 15:53:36 SkyScan query 15:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 15:53:37 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 15:53:37 Check angles 15:53:37 SkyScan query 15:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 15:53:38 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 15:53:38 Check angles 15:53:38 SkyScan query 15:53:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.865<-22991 Statuses=0008 0009 15:53:39 Msec=3000 True Az=112.995 Ze=-164.865 Az status=0008 Ze status=0009 15:53:39 Check angles 15:53:39 SkyScan query 15:53:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 15:53:39 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 15:53:39 Message to Master queued w/err=0: serial=226351 error=0 15:53:44 Received message from Master: op=Filter serial=226352 15:53:44 Color wheel filter change from 0 to 0 15:53:44 FLIGetFilterPos err=0 currentPosition=0 15:53:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:53:44 Filter is already there-color wheel unchanged 15:53:44 Received message from Master: op=Shutter serial=226353 15:53:44 Shutter LASER open 15:53:45 Received message from Camera: op=State serial=226355 15:53:45 GetSingleValue result=40 Value=cccccccc 15:53:45 SkyScan query 15:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:53:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:45 Parameters OK 15:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:45 Set A/D data flow result=40 15:53:45 Set A/D channel type result=40 15:53:45 Set A/D encoding result=40 15:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:45 Set channel filter=0.000000e+000 result=40 15:53:45 Config A/D Result=40 15:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:45 Get A/D filter: -9.255963e+061 result=40 15:53:45 Get A/D value=-858993460 result=40 15:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:45 Parameters OK 15:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:45 Set A/D data flow result=40 15:53:45 Set A/D channel type result=40 15:53:45 Set A/D encoding result=40 15:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:45 Set channel filter=0.000000e+000 result=40 15:53:45 Config A/D Result=40 15:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:45 Get A/D filter: -9.255963e+061 result=40 15:53:45 Get A/D value=-858993460 result=40 15:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:53:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:53:45 Aux= 15:53:45 Message to Camera, serial 226355 queued 15:53:54 Received message from Master: op=Shutter serial=226365 15:53:54 Shutter LASER close 15:53:54 Received message from Master: op=PointingHead serial=226369 15:53:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:53:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:53:54 Point started: ret=0 15:53:54 point_skyscan result=0 15:53:55 Check angles 15:53:55 SkyScan query 15:53:56 SkyScan query done: ret=0 az=89.46<-5964 ze=156.735<-1551 Statuses=0009 0009 15:53:56 Msec=0 True Az=89.46 Ze=156.735 Az status=0009 Ze status=0009 15:53:56 Check angles 15:53:56 SkyScan query 15:53:57 SkyScan query done: ret=0 az=72.015<-4801 ze=135.78<-2948 Statuses=0009 0009 15:53:57 Msec=750 True Az=72.015 Ze=135.78 Az status=0009 Ze status=0009 15:53:57 Check angles 15:53:57 SkyScan query 15:53:57 SkyScan query done: ret=0 az=54.57<-3638 ze=114.81<-4346 Statuses=0009 0009 15:53:57 Msec=1500 True Az=54.57 Ze=114.81 Az status=0009 Ze status=0009 15:53:57 Check angles 15:53:57 SkyScan query 15:53:58 SkyScan query done: ret=0 az=41.01<-2734 ze=93.87<-5742 Statuses=0009 0009 15:53:58 Msec=2250 True Az=41.01 Ze=93.87 Az status=0009 Ze status=0009 15:53:58 Check angles 15:53:58 SkyScan query 15:53:59 SkyScan query done: ret=0 az=40.98<-2732 ze=72.9<-7140 Statuses=0008 0009 15:53:59 Msec=3000 True Az=40.98 Ze=72.9 Az status=0008 Ze status=0009 15:53:59 Check angles 15:53:59 SkyScan query 15:54:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 15:54:00 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 15:54:00 Check angles 15:54:00 SkyScan query 15:54:00 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 15:54:00 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 15:54:00 Message to Master queued w/err=0: serial=226369 error=0 15:54:05 Received message from Master: op=Filter serial=226370 15:54:05 Color wheel filter change from 0 to 0 15:54:05 FLIGetFilterPos err=0 currentPosition=0 15:54:05 FLIGetStepsRemaining err=0 RemainingSteps=0 15:54:05 Filter is already there-color wheel unchanged 15:54:05 Received message from Master: op=Shutter serial=226371 15:54:05 Shutter LASER close 15:54:06 Received message from Camera: op=State serial=226373 15:54:06 GetSingleValue result=40 Value=cccccccc 15:54:06 SkyScan query 15:54:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:54:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:06 Parameters OK 15:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:06 Set A/D data flow result=40 15:54:06 Set A/D channel type result=40 15:54:06 Set A/D encoding result=40 15:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:06 Set channel filter=0.000000e+000 result=40 15:54:06 Config A/D Result=40 15:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:06 Get A/D filter: -9.255963e+061 result=40 15:54:06 Get A/D value=-858993460 result=40 15:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:06 Parameters OK 15:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:06 Set A/D data flow result=40 15:54:06 Set A/D channel type result=40 15:54:06 Set A/D encoding result=40 15:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:06 Set channel filter=0.000000e+000 result=40 15:54:06 Config A/D Result=40 15:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:06 Get A/D filter: -9.255963e+061 result=40 15:54:06 Get A/D value=-858993460 result=40 15:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:54:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:54:06 Aux= 15:54:06 Message to Camera, serial 226373 queued 15:54:43 Received message from Master: op=PointingHead serial=226386 15:54:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:54:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:54:43 Point started: ret=0 15:54:43 point_skyscan result=0 15:54:44 Check angles 15:54:44 SkyScan query 15:54:45 SkyScan query done: ret=0 az=63.975<-4265 ze=66.54<-7564 Statuses=0009 0008 15:54:45 Msec=0 True Az=63.975 Ze=66.54 Az status=0009 Ze status=0008 15:54:45 Check angles 15:54:45 SkyScan query 15:54:45 SkyScan query done: ret=0 az=81.81<-5454 ze=66.51<-7566 Statuses=0009 0008 15:54:45 Msec=750 True Az=81.81 Ze=66.51 Az status=0009 Ze status=0008 15:54:46 Check angles 15:54:46 SkyScan query 15:54:46 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 15:54:46 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 15:54:46 Check angles 15:54:46 SkyScan query 15:54:47 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 15:54:47 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 15:54:47 Check angles 15:54:47 SkyScan query 15:54:48 SkyScan query done: ret=0 az=134.52<-8968 ze=66.495<-7567 Statuses=0009 0008 15:54:48 Msec=3000 True Az=134.52 Ze=66.495 Az status=0009 Ze status=0008 15:54:48 Check angles 15:54:48 SkyScan query 15:54:48 SkyScan query done: ret=0 az=152.37<-10158 ze=66.495<-7567 Statuses=0009 0008 15:54:48 Msec=3750 True Az=152.37 Ze=66.495 Az status=0009 Ze status=0008 15:54:49 Check angles 15:54:49 SkyScan query 15:54:49 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:54:49 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:54:49 Message to Master queued w/err=0: serial=226386 error=0 15:54:54 Received message from Master: op=Filter serial=226387 15:54:54 Color wheel filter change from 0 to 0 15:54:54 FLIGetFilterPos err=0 currentPosition=0 15:54:54 FLIGetStepsRemaining err=0 RemainingSteps=0 15:54:54 Filter is already there-color wheel unchanged 15:54:54 Received message from Master: op=Shutter serial=226388 15:54:54 Shutter LASER close 15:54:54 Received message from Camera: op=State serial=226390 15:54:54 GetSingleValue result=40 Value=cccccccc 15:54:54 SkyScan query 15:54:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:54:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:55 Parameters OK 15:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:55 Set A/D data flow result=40 15:54:55 Set A/D channel type result=40 15:54:55 Set A/D encoding result=40 15:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:55 Set channel filter=0.000000e+000 result=40 15:54:55 Config A/D Result=40 15:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:55 Get A/D filter: -9.255963e+061 result=40 15:54:55 Get A/D value=-858993460 result=40 15:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:55 Parameters OK 15:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:55 Set A/D data flow result=40 15:54:55 Set A/D channel type result=40 15:54:55 Set A/D encoding result=40 15:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:55 Set channel filter=0.000000e+000 result=40 15:54:55 Config A/D Result=40 15:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:55 Get A/D filter: -9.255963e+061 result=40 15:54:55 Get A/D value=-858993460 result=40 15:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:54:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:54:55 Aux= 15:54:55 Message to Camera, serial 226390 queued 15:55:32 Received message from Master: op=PointingHead serial=226403 15:55:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:55:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:55:32 Point started: ret=0 15:55:32 point_skyscan result=0 15:55:33 Check angles 15:55:33 SkyScan query 15:55:34 SkyScan query done: ret=0 az=134.7<-8980 ze=36.39<-9574 Statuses=0009 0009 15:55:34 Msec=0 True Az=134.7 Ze=36.39 Az status=0009 Ze status=0009 15:55:34 Check angles 15:55:34 SkyScan query 15:55:34 SkyScan query done: ret=0 az=117.225<-7815 ze=15.48<-10968 Statuses=0009 0009 15:55:34 Msec=750 True Az=117.225 Ze=15.48 Az status=0009 Ze status=0009 [UTC 2018-12-17 15:55:34] 15:55:34 Check angles 15:55:35 SkyScan query 15:55:35 SkyScan query done: ret=0 az=97.905<-6527 ze=-7.755<-12517 Statuses=0009 0009 15:55:35 Msec=1500 True Az=97.905 Ze=-7.755 Az status=0009 Ze status=0009 15:55:35 Check angles 15:55:35 SkyScan query 15:55:36 SkyScan query done: ret=0 az=81.675<-5445 ze=-27.405<-13827 Statuses=0009 0009 15:55:36 Msec=2250 True Az=81.675 Ze=-27.405 Az status=0009 Ze status=0009 15:55:36 Check angles 15:55:36 SkyScan query 15:55:37 SkyScan query done: ret=0 az=63.75<-4250 ze=-38.58<-14572 Statuses=0009 0008 15:55:37 Msec=3000 True Az=63.75 Ze=-38.58 Az status=0009 Ze status=0008 15:55:37 Check angles 15:55:37 SkyScan query 15:55:37 SkyScan query done: ret=0 az=46.38<-3092 ze=-38.52<-14568 Statuses=0009 0008 15:55:37 Msec=3750 True Az=46.38 Ze=-38.52 Az status=0009 Ze status=0008 15:55:38 Check angles 15:55:38 SkyScan query 15:55:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:55:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:55:38 Message to Master queued w/err=0: serial=226403 error=0 15:55:43 Received message from Master: op=Filter serial=226404 15:55:43 Color wheel filter change from 0 to 0 15:55:43 FLIGetFilterPos err=0 currentPosition=0 15:55:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:55:43 Filter is already there-color wheel unchanged 15:55:43 Received message from Master: op=Shutter serial=226405 15:55:43 Shutter LASER close 15:55:43 Received message from Camera: op=State serial=226407 15:55:43 GetSingleValue result=40 Value=cccccccc 15:55:43 SkyScan query 15:55:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:55:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:44 Parameters OK 15:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:44 Set A/D data flow result=40 15:55:44 Set A/D channel type result=40 15:55:44 Set A/D encoding result=40 15:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:44 Set channel filter=0.000000e+000 result=40 15:55:44 Config A/D Result=40 15:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:44 Get A/D filter: -9.255963e+061 result=40 15:55:44 Get A/D value=-858993460 result=40 15:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:44 Parameters OK 15:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:44 Set A/D data flow result=40 15:55:44 Set A/D channel type result=40 15:55:44 Set A/D encoding result=40 15:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:44 Set channel filter=0.000000e+000 result=40 15:55:44 Config A/D Result=40 15:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:44 Get A/D filter: -9.255963e+061 result=40 15:55:44 Get A/D value=-858993460 result=40 15:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:55:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:55:44 Aux= 15:55:44 Message to Camera, serial 226407 queued [UTC 2018-12-17 15:55:52] 15:56:20 Received message from Master: op=PointingHead serial=226419 15:56:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:56:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:56:20 Point started: ret=0 15:56:20 point_skyscan result=0 15:56:21 Check angles 15:56:21 SkyScan query 15:56:22 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.13<-16542 Statuses=0009 0009 15:56:22 Msec=0 True Az=63.78 Ze=-68.13 Az status=0009 Ze status=0009 15:56:22 Check angles 15:56:22 SkyScan query 15:56:22 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.1<-17940 Statuses=0009 0009 15:56:22 Msec=750 True Az=81.33 Ze=-89.1 Az status=0009 Ze status=0009 15:56:22 Check angles 15:56:22 SkyScan query 15:56:23 SkyScan query done: ret=0 az=98.655<-6577 ze=-110.01<-19334 Statuses=0009 0009 15:56:23 Msec=1500 True Az=98.655 Ze=-110.01 Az status=0009 Ze status=0009 15:56:23 Check angles 15:56:23 SkyScan query 15:56:24 SkyScan query done: ret=0 az=116.16<-7744 ze=-130.995<-20733 Statuses=0009 0009 15:56:24 Msec=2250 True Az=116.16 Ze=-130.995 Az status=0009 Ze status=0009 15:56:24 Check angles 15:56:24 SkyScan query 15:56:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 15:56:25 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 15:56:25 Check angles 15:56:25 SkyScan query 15:56:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:56:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:56:25 Message to Master queued w/err=0: serial=226419 error=0 15:56:30 Received message from Master: op=Filter serial=226420 15:56:30 Color wheel filter change from 0 to 0 15:56:30 FLIGetFilterPos err=0 currentPosition=0 15:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:56:30 Filter is already there-color wheel unchanged 15:56:30 Received message from Master: op=Shutter serial=226421 15:56:30 Shutter LASER close 15:56:30 Received message from Camera: op=State serial=226423 15:56:30 GetSingleValue result=40 Value=cccccccc 15:56:30 SkyScan query 15:56:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:56:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:31 Parameters OK 15:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:31 Set A/D data flow result=40 15:56:31 Set A/D channel type result=40 15:56:31 Set A/D encoding result=40 15:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:31 Set channel filter=0.000000e+000 result=40 15:56:31 Config A/D Result=40 15:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:31 Get A/D filter: -9.255963e+061 result=40 15:56:31 Get A/D value=-858993460 result=40 15:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:31 Parameters OK 15:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:31 Set A/D data flow result=40 15:56:31 Set A/D channel type result=40 15:56:31 Set A/D encoding result=40 15:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:31 Set channel filter=0.000000e+000 result=40 15:56:31 Config A/D Result=40 15:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:31 Get A/D filter: -9.255963e+061 result=40 15:56:31 Get A/D value=-858993460 result=40 15:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:56:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:56:31 Aux= 15:56:31 Message to Camera, serial 226423 queued 15:57:08 Received message from Master: op=PointingHead serial=226436 15:57:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:57:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:57:08 Point started: ret=0 15:57:08 point_skyscan result=0 15:57:09 Check angles 15:57:09 SkyScan query 15:57:10 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 15:57:10 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 15:57:10 Check angles 15:57:10 SkyScan query 15:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:57:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:57:10 Message to Master queued w/err=0: serial=226436 error=0 15:57:15 Received message from Master: op=Filter serial=226437 15:57:15 Color wheel filter change from 0 to 0 15:57:15 FLIGetFilterPos err=0 currentPosition=0 15:57:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:57:15 Filter is already there-color wheel unchanged 15:57:15 Received message from Master: op=Shutter serial=226438 15:57:15 Shutter LASER open 15:57:16 Received message from Camera: op=State serial=226440 15:57:16 GetSingleValue result=40 Value=cccccccc 15:57:16 SkyScan query 15:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:57:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:16 Parameters OK 15:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:16 Set A/D data flow result=40 15:57:16 Set A/D channel type result=40 15:57:16 Set A/D encoding result=40 15:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:16 Set channel filter=0.000000e+000 result=40 15:57:16 Config A/D Result=40 15:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:16 Get A/D filter: -9.255963e+061 result=40 15:57:16 Get A/D value=-858993460 result=40 15:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:16 Parameters OK 15:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:16 Set A/D data flow result=40 15:57:16 Set A/D channel type result=40 15:57:16 Set A/D encoding result=40 15:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:16 Set channel filter=0.000000e+000 result=40 15:57:16 Config A/D Result=40 15:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:16 Get A/D filter: -9.255963e+061 result=40 15:57:16 Get A/D value=-858993460 result=40 15:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:16 Aux= 15:57:16 Message to Camera, serial 226440 queued 15:57:25 Received message from Master: op=Shutter serial=226450 15:57:25 Shutter LASER close 15:57:25 Received message from Master: op=PointingHead serial=226454 15:57:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:57:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:57:26 Point started: ret=0 15:57:26 point_skyscan result=0 15:57:26 Check angles 15:57:26 SkyScan query 15:57:27 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.505<-21567 Statuses=0009 0009 15:57:27 Msec=0 True Az=135.72 Ze=-143.505 Az status=0009 Ze status=0009 15:57:27 Check angles 15:57:27 SkyScan query 15:57:28 SkyScan query done: ret=0 az=153.255<-10217 ze=-122.52<-20168 Statuses=0009 0009 15:57:28 Msec=750 True Az=153.255 Ze=-122.52 Az status=0009 Ze status=0009 15:57:28 Check angles 15:57:28 SkyScan query 15:57:28 SkyScan query done: ret=0 az=171.24<-11416 ze=-101.145<-18743 Statuses=0009 0009 15:57:28 Msec=1500 True Az=171.24 Ze=-101.145 Az status=0009 Ze status=0009 15:57:29 Check angles 15:57:29 SkyScan query 15:57:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.74<-17316 Statuses=0008 0009 15:57:29 Msec=2250 True Az=175.995 Ze=-79.74 Az status=0008 Ze status=0009 15:57:29 Check angles 15:57:29 SkyScan query 15:57:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.755<-15917 Statuses=0008 0009 15:57:30 Msec=3000 True Az=175.995 Ze=-58.755 Az status=0008 Ze status=0009 15:57:30 Check angles 15:57:30 SkyScan query 15:57:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:57:31 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:57:31 Message to Master queued w/err=0: serial=226454 error=0 15:57:36 Received message from Master: op=Filter serial=226455 15:57:36 Color wheel filter change from 0 to 0 15:57:36 FLIGetFilterPos err=0 currentPosition=0 15:57:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:57:36 Filter is already there-color wheel unchanged 15:57:36 Received message from Master: op=Shutter serial=226456 15:57:36 Shutter LASER close 15:57:36 Received message from Camera: op=State serial=226458 15:57:36 GetSingleValue result=40 Value=cccccccc 15:57:36 SkyScan query 15:57:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:57:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:37 Parameters OK 15:57:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:37 Set A/D data flow result=40 15:57:37 Set A/D channel type result=40 15:57:37 Set A/D encoding result=40 15:57:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:37 Set channel filter=0.000000e+000 result=40 15:57:37 Config A/D Result=40 15:57:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:37 Get A/D filter: -9.255963e+061 result=40 15:57:37 Get A/D value=-858993460 result=40 15:57:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:37 Parameters OK 15:57:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:37 Set A/D data flow result=40 15:57:37 Set A/D channel type result=40 15:57:37 Set A/D encoding result=40 15:57:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:37 Set channel filter=0.000000e+000 result=40 15:57:37 Config A/D Result=40 15:57:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:37 Get A/D filter: -9.255963e+061 result=40 15:57:37 Get A/D value=-858993460 result=40 15:57:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:37 Aux= 15:57:37 Message to Camera, serial 226458 queued 15:58:13 Received message from Master: op=PointingHead serial=226471 15:58:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:58:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:58:14 Point started: ret=0 15:58:14 point_skyscan result=0 15:58:15 Check angles 15:58:15 SkyScan query 15:58:15 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.975<-13465 Statuses=0009 0009 15:58:15 Msec=0 True Az=153.165 Ze=-21.975 Az status=0009 Ze status=0009 15:58:15 Check angles 15:58:15 SkyScan query 15:58:16 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.975<-12065 Statuses=0009 0009 15:58:16 Msec=750 True Az=135.705 Ze=-0.975 Az status=0009 Ze status=0009 15:58:16 Check angles 15:58:16 SkyScan query 15:58:17 SkyScan query done: ret=0 az=117.795<-7853 ze=20.415<-10639 Statuses=0009 0009 15:58:17 Msec=1500 True Az=117.795 Ze=20.415 Az status=0009 Ze status=0009 15:58:17 Check angles 15:58:17 SkyScan query 15:58:17 SkyScan query done: ret=0 az=100.455<-6697 ze=41.37<-9242 Statuses=0009 0009 15:58:17 Msec=2250 True Az=100.455 Ze=41.37 Az status=0009 Ze status=0009 15:58:18 Check angles 15:58:18 SkyScan query 15:58:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 15:58:18 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 15:58:18 Check angles 15:58:18 SkyScan query 15:58:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:58:19 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:58:19 Message to Master queued w/err=0: serial=226471 error=0 15:58:24 Received message from Master: op=Filter serial=226472 15:58:24 Color wheel filter change from 0 to 0 15:58:24 FLIGetFilterPos err=0 currentPosition=0 15:58:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:58:24 Filter is already there-color wheel unchanged 15:58:24 Received message from Master: op=Shutter serial=226473 15:58:24 Shutter LASER close 15:58:24 Received message from Camera: op=State serial=226475 15:58:24 GetSingleValue result=40 Value=cccccccc 15:58:24 SkyScan query 15:58:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:58:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:25 Parameters OK 15:58:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:25 Set A/D data flow result=40 15:58:25 Set A/D channel type result=40 15:58:25 Set A/D encoding result=40 15:58:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:25 Set channel filter=0.000000e+000 result=40 15:58:25 Config A/D Result=40 15:58:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:25 Get A/D filter: -9.255963e+061 result=40 15:58:25 Get A/D value=-858993460 result=40 15:58:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:25 Parameters OK 15:58:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:25 Set A/D data flow result=40 15:58:25 Set A/D channel type result=40 15:58:25 Set A/D encoding result=40 15:58:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:25 Set channel filter=0.000000e+000 result=40 15:58:25 Config A/D Result=40 15:58:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:25 Get A/D filter: -9.255963e+061 result=40 15:58:25 Get A/D value=-858993460 result=40 15:58:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:58:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:58:25 Aux= 15:58:25 Message to Camera, serial 226475 queued 15:59:02 Received message from Master: op=PointingHead serial=226488 15:59:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:59:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:59:02 Point started: ret=0 15:59:02 point_skyscan result=0 15:59:03 Check angles 15:59:03 SkyScan query 15:59:03 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 15:59:03 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 15:59:03 Check angles 15:59:03 SkyScan query 15:59:04 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 15:59:04 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 15:59:04 Check angles 15:59:04 SkyScan query 15:59:05 SkyScan query done: ret=0 az=144.315<-9621 ze=38.505<-9433 Statuses=0009 0008 15:59:05 Msec=1500 True Az=144.315 Ze=38.505 Az status=0009 Ze status=0008 15:59:05 Check angles 15:59:05 SkyScan query 15:59:05 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 15:59:05 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 15:59:06 Check angles 15:59:06 SkyScan query 15:59:06 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:59:06 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:59:06 Check angles 15:59:06 SkyScan query 15:59:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:59:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:59:07 Message to Master queued w/err=0: serial=226488 error=0 15:59:12 Received message from Master: op=Filter serial=226489 15:59:12 Color wheel filter change from 0 to 0 15:59:12 FLIGetFilterPos err=0 currentPosition=0 15:59:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:59:12 Filter is already there-color wheel unchanged 15:59:12 Received message from Master: op=Shutter serial=226490 15:59:12 Shutter LASER close 15:59:12 Received message from Camera: op=State serial=226492 15:59:12 GetSingleValue result=40 Value=cccccccc 15:59:12 SkyScan query 15:59:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:59:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:13 Parameters OK 15:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:13 Set A/D data flow result=40 15:59:13 Set A/D channel type result=40 15:59:13 Set A/D encoding result=40 15:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:13 Set channel filter=0.000000e+000 result=40 15:59:13 Config A/D Result=40 15:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:13 Get A/D filter: -9.255963e+061 result=40 15:59:13 Get A/D value=-858993460 result=40 15:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:13 Parameters OK 15:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:13 Set A/D data flow result=40 15:59:13 Set A/D channel type result=40 15:59:13 Set A/D encoding result=40 15:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:13 Set channel filter=0.000000e+000 result=40 15:59:13 Config A/D Result=40 15:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:13 Get A/D filter: -9.255963e+061 result=40 15:59:13 Get A/D value=-858993460 result=40 15:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:59:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:59:13 Aux= 15:59:13 Message to Camera, serial 226492 queued 15:59:50 Received message from Master: op=PointingHead serial=226505 15:59:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:59:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:59:50 Point started: ret=0 15:59:50 point_skyscan result=0 15:59:51 Check angles 15:59:51 SkyScan query 15:59:51 SkyScan query done: ret=0 az=152.955<-10197 ze=8.73<-11418 Statuses=0009 0009 15:59:51 Msec=0 True Az=152.955 Ze=8.73 Az status=0009 Ze status=0009 15:59:51 Check angles 15:59:51 SkyScan query 15:59:52 SkyScan query done: ret=0 az=135.57<-9038 ze=-12.24<-12816 Statuses=0009 0009 15:59:52 Msec=750 True Az=135.57 Ze=-12.24 Az status=0009 Ze status=0009 15:59:52 Check angles 15:59:52 SkyScan query 15:59:53 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.645<-14243 Statuses=0009 0009 15:59:53 Msec=1500 True Az=117.615 Ze=-33.645 Az status=0009 Ze status=0009 15:59:53 Check angles 15:59:53 SkyScan query 15:59:54 SkyScan query done: ret=0 az=99.915<-6661 ze=-51.57<-15438 Statuses=0009 0009 15:59:54 Msec=2250 True Az=99.915 Ze=-51.57 Az status=0009 Ze status=0009 15:59:54 Check angles 15:59:54 SkyScan query 15:59:54 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:59:54 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:59:54 Check angles 15:59:54 SkyScan query 15:59:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:59:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:59:55 Message to Master queued w/err=0: serial=226505 error=0 16:00:00 Received message from Master: op=Filter serial=226506 16:00:00 Color wheel filter change from 0 to 0 16:00:00 FLIGetFilterPos err=0 currentPosition=0 16:00:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:00 Filter is already there-color wheel unchanged 16:00:00 Received message from Master: op=Shutter serial=226507 16:00:00 Shutter LASER close 16:00:00 Received message from Camera: op=State serial=226509 16:00:00 GetSingleValue result=40 Value=cccccccc 16:00:00 SkyScan query 16:00:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:00:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:01 Parameters OK 16:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:01 Set A/D data flow result=40 16:00:01 Set A/D channel type result=40 16:00:01 Set A/D encoding result=40 16:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:01 Set channel filter=0.000000e+000 result=40 16:00:01 Config A/D Result=40 16:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:01 Get A/D filter: -9.255963e+061 result=40 16:00:01 Get A/D value=-858993460 result=40 16:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:01 Parameters OK 16:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:01 Set A/D data flow result=40 16:00:01 Set A/D channel type result=40 16:00:01 Set A/D encoding result=40 16:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:01 Set channel filter=0.000000e+000 result=40 16:00:01 Config A/D Result=40 16:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:01 Get A/D filter: -9.255963e+061 result=40 16:00:01 Get A/D value=-858993460 result=40 16:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:01 Aux= 16:00:01 Message to Camera, serial 226509 queued 16:00:38 Received message from Master: op=PointingHead serial=226522 16:00:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:00:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:00:38 Point started: ret=0 16:00:38 point_skyscan result=0 16:00:39 Check angles 16:00:39 SkyScan query 16:00:39 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.045<-17403 Statuses=0009 0009 16:00:39 Msec=0 True Az=108.93 Ze=-81.045 Az status=0009 Ze status=0009 16:00:40 Check angles 16:00:40 SkyScan query 16:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.015<-18801 Statuses=0008 0009 16:00:40 Msec=750 True Az=112.995 Ze=-102.015 Az status=0008 Ze status=0009 16:00:40 Check angles 16:00:40 SkyScan query 16:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.955<-20197 Statuses=0008 0009 16:00:41 Msec=1500 True Az=112.995 Ze=-122.955 Az status=0008 Ze status=0009 16:00:41 Check angles 16:00:41 SkyScan query 16:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 16:00:42 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 16:00:42 Check angles 16:00:42 SkyScan query 16:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.865<-22991 Statuses=0008 0009 16:00:42 Msec=3000 True Az=112.995 Ze=-164.865 Az status=0008 Ze status=0009 16:00:43 Check angles 16:00:43 SkyScan query 16:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:00:43 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:00:43 Message to Master queued w/err=0: serial=226522 error=0 16:00:48 Received message from Master: op=Filter serial=226523 16:00:48 Color wheel filter change from 0 to 0 16:00:48 FLIGetFilterPos err=0 currentPosition=0 16:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:48 Filter is already there-color wheel unchanged 16:00:48 Received message from Master: op=Shutter serial=226524 16:00:48 Shutter LASER open 16:00:49 Received message from Camera: op=State serial=226526 16:00:49 GetSingleValue result=40 Value=cccccccc 16:00:49 SkyScan query 16:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:49 Parameters OK 16:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:49 Set A/D data flow result=40 16:00:49 Set A/D channel type result=40 16:00:49 Set A/D encoding result=40 16:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:49 Set channel filter=0.000000e+000 result=40 16:00:49 Config A/D Result=40 16:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:49 Get A/D filter: -9.255963e+061 result=40 16:00:49 Get A/D value=-858993460 result=40 16:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:49 Parameters OK 16:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:49 Set A/D data flow result=40 16:00:49 Set A/D channel type result=40 16:00:49 Set A/D encoding result=40 16:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:49 Set channel filter=0.000000e+000 result=40 16:00:49 Config A/D Result=40 16:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:49 Get A/D filter: -9.255963e+061 result=40 16:00:49 Get A/D value=-858993460 result=40 16:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:49 Aux= 16:00:49 Message to Camera, serial 226526 queued 16:00:58 Received message from Master: op=Shutter serial=226536 16:00:58 Shutter LASER close 16:00:58 Received message from Master: op=PointingHead serial=226540 16:00:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:00:58 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:00:58 Point started: ret=0 16:00:58 point_skyscan result=0 16:00:59 Check angles 16:00:59 SkyScan query 16:01:00 SkyScan query done: ret=0 az=89.805<-5987 ze=157.02<-1532 Statuses=0009 0009 16:01:00 Msec=0 True Az=89.805 Ze=157.02 Az status=0009 Ze status=0009 16:01:00 Check angles 16:01:00 SkyScan query 16:01:00 SkyScan query done: ret=0 az=71.73<-4782 ze=135.63<-2958 Statuses=0009 0009 16:01:00 Msec=750 True Az=71.73 Ze=135.63 Az status=0009 Ze status=0009 16:01:01 Check angles 16:01:01 SkyScan query 16:01:01 SkyScan query done: ret=0 az=54.495<-3633 ze=114.63<-4358 Statuses=0009 0009 16:01:01 Msec=1500 True Az=54.495 Ze=114.63 Az status=0009 Ze status=0009 16:01:01 Check angles 16:01:01 SkyScan query 16:01:02 SkyScan query done: ret=0 az=41.01<-2734 ze=93.735<-5751 Statuses=0009 0009 16:01:02 Msec=2250 True Az=41.01 Ze=93.735 Az status=0009 Ze status=0009 16:01:02 Check angles 16:01:02 SkyScan query 16:01:03 SkyScan query done: ret=0 az=40.98<-2732 ze=72.72<-7152 Statuses=0008 0009 16:01:03 Msec=3000 True Az=40.98 Ze=72.72 Az status=0008 Ze status=0009 16:01:03 Check angles 16:01:03 SkyScan query 16:01:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 16:01:03 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 16:01:04 Check angles 16:01:04 SkyScan query 16:01:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:01:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:01:04 Message to Master queued w/err=0: serial=226540 error=0 16:01:09 Received message from Master: op=Filter serial=226541 16:01:09 Color wheel filter change from 0 to 0 16:01:09 FLIGetFilterPos err=0 currentPosition=0 16:01:09 FLIGetStepsRemaining err=0 RemainingSteps=0 16:01:09 Filter is already there-color wheel unchanged 16:01:09 Received message from Master: op=Shutter serial=226542 16:01:09 Shutter LASER close 16:01:10 Received message from Camera: op=State serial=226544 16:01:10 GetSingleValue result=40 Value=cccccccc 16:01:10 SkyScan query 16:01:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:01:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:10 Parameters OK 16:01:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:10 Set A/D data flow result=40 16:01:10 Set A/D channel type result=40 16:01:10 Set A/D encoding result=40 16:01:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:10 Set channel filter=0.000000e+000 result=40 16:01:10 Config A/D Result=40 16:01:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:10 Get A/D filter: -9.255963e+061 result=40 16:01:10 Get A/D value=-858993460 result=40 16:01:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:10 Parameters OK 16:01:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:10 Set A/D data flow result=40 16:01:10 Set A/D channel type result=40 16:01:10 Set A/D encoding result=40 16:01:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:10 Set channel filter=0.000000e+000 result=40 16:01:10 Config A/D Result=40 16:01:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:10 Get A/D filter: -9.255963e+061 result=40 16:01:10 Get A/D value=-858993460 result=40 16:01:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:01:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:01:10 Aux= 16:01:10 Message to Camera, serial 226544 queued 16:01:46 Received message from Master: op=PointingHead serial=226556 16:01:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:01:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:01:46 Point started: ret=0 16:01:46 point_skyscan result=0 16:01:47 Check angles 16:01:47 SkyScan query 16:01:48 SkyScan query done: ret=0 az=64.44<-4296 ze=66.54<-7564 Statuses=0009 0008 16:01:48 Msec=0 True Az=64.44 Ze=66.54 Az status=0009 Ze status=0008 16:01:48 Check angles 16:01:48 SkyScan query 16:01:48 SkyScan query done: ret=0 az=81.915<-5461 ze=66.51<-7566 Statuses=0009 0008 16:01:48 Msec=750 True Az=81.915 Ze=66.51 Az status=0009 Ze status=0008 16:01:49 Check angles 16:01:49 SkyScan query 16:01:49 SkyScan query done: ret=0 az=99.42<-6628 ze=66.495<-7567 Statuses=0009 0008 16:01:49 Msec=1500 True Az=99.42 Ze=66.495 Az status=0009 Ze status=0008 16:01:49 Check angles 16:01:49 SkyScan query 16:01:50 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 16:01:50 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 16:01:50 Check angles 16:01:50 SkyScan query 16:01:51 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 16:01:51 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 16:01:51 Check angles 16:01:51 SkyScan query 16:01:51 SkyScan query done: ret=0 az=152.445<-10163 ze=66.495<-7567 Statuses=0009 0008 16:01:51 Msec=3750 True Az=152.445 Ze=66.495 Az status=0009 Ze status=0008 16:01:52 Check angles 16:01:52 SkyScan query 16:01:52 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:01:52 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:01:52 Message to Master queued w/err=0: serial=226556 error=0 16:01:57 Received message from Master: op=Filter serial=226557 16:01:57 Color wheel filter change from 0 to 0 16:01:57 FLIGetFilterPos err=0 currentPosition=0 16:01:57 FLIGetStepsRemaining err=0 RemainingSteps=0 16:01:57 Filter is already there-color wheel unchanged 16:01:57 Received message from Master: op=Shutter serial=226558 16:01:57 Shutter LASER close 16:01:57 Received message from Camera: op=State serial=226560 16:01:57 GetSingleValue result=40 Value=cccccccc 16:01:57 SkyScan query 16:01:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:01:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:58 Parameters OK 16:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:58 Set A/D data flow result=40 16:01:58 Set A/D channel type result=40 16:01:58 Set A/D encoding result=40 16:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:58 Set channel filter=0.000000e+000 result=40 16:01:58 Config A/D Result=40 16:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:58 Get A/D filter: -9.255963e+061 result=40 16:01:58 Get A/D value=-858993460 result=40 16:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:58 Parameters OK 16:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:58 Set A/D data flow result=40 16:01:58 Set A/D channel type result=40 16:01:58 Set A/D encoding result=40 16:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:58 Set channel filter=0.000000e+000 result=40 16:01:58 Config A/D Result=40 16:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:58 Get A/D filter: -9.255963e+061 result=40 16:01:58 Get A/D value=-858993460 result=40 16:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:01:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:01:58 Aux= 16:01:58 Message to Camera, serial 226560 queued 16:02:35 Received message from Master: op=PointingHead serial=226573 16:02:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:02:35 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:02:35 Point started: ret=0 16:02:35 point_skyscan result=0 16:02:36 Check angles 16:02:36 SkyScan query 16:02:37 SkyScan query done: ret=0 az=134.55<-8970 ze=36.15<-9590 Statuses=0009 0009 16:02:37 Msec=0 True Az=134.55 Ze=36.15 Az status=0009 Ze status=0009 16:02:37 Check angles 16:02:37 SkyScan query 16:02:37 SkyScan query done: ret=0 az=116.64<-7776 ze=14.7<-11020 Statuses=0009 0009 16:02:37 Msec=750 True Az=116.64 Ze=14.7 Az status=0009 Ze status=0009 16:02:37 Check angles 16:02:37 SkyScan query 16:02:38 SkyScan query done: ret=0 az=99.27<-6618 ze=-6.255<-12417 Statuses=0009 0009 16:02:38 Msec=1500 True Az=99.27 Ze=-6.255 Az status=0009 Ze status=0009 16:02:38 Check angles 16:02:38 SkyScan query 16:02:39 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.195<-13813 Statuses=0009 0009 16:02:39 Msec=2250 True Az=81.81 Ze=-27.195 Az status=0009 Ze status=0009 16:02:39 Check angles 16:02:39 SkyScan query 16:02:40 SkyScan query done: ret=0 az=64.335<-4289 ze=-38.58<-14572 Statuses=0009 0008 16:02:40 Msec=3000 True Az=64.335 Ze=-38.58 Az status=0009 Ze status=0008 16:02:40 Check angles 16:02:40 SkyScan query 16:02:40 SkyScan query done: ret=0 az=46.755<-3117 ze=-38.52<-14568 Statuses=0009 0008 16:02:40 Msec=3750 True Az=46.755 Ze=-38.52 Az status=0009 Ze status=0008 16:02:40 Check angles 16:02:40 SkyScan query 16:02:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:02:41 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:02:41 Message to Master queued w/err=0: serial=226573 error=0 16:02:46 Received message from Master: op=Filter serial=226574 16:02:46 Color wheel filter change from 0 to 0 16:02:46 FLIGetFilterPos err=0 currentPosition=0 16:02:46 FLIGetStepsRemaining err=0 RemainingSteps=0 16:02:46 Filter is already there-color wheel unchanged 16:02:46 Received message from Master: op=Shutter serial=226575 16:02:46 Shutter LASER close 16:02:46 Received message from Camera: op=State serial=226577 16:02:46 GetSingleValue result=40 Value=cccccccc 16:02:46 SkyScan query 16:02:47 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:02:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:47 Parameters OK 16:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:47 Set A/D data flow result=40 16:02:47 Set A/D channel type result=40 16:02:47 Set A/D encoding result=40 16:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:47 Set channel filter=0.000000e+000 result=40 16:02:47 Config A/D Result=40 16:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:47 Get A/D filter: -9.255963e+061 result=40 16:02:47 Get A/D value=-858993460 result=40 16:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:47 Parameters OK 16:02:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:47 Set A/D data flow result=40 16:02:47 Set A/D channel type result=40 16:02:47 Set A/D encoding result=40 16:02:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:47 Set channel filter=0.000000e+000 result=40 16:02:47 Config A/D Result=40 16:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:47 Get A/D filter: -9.255963e+061 result=40 16:02:47 Get A/D value=-858993460 result=40 16:02:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:02:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:02:47 Aux= 16:02:47 Message to Camera, serial 226577 queued 16:03:24 Received message from Master: op=PointingHead serial=226590 16:03:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:03:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:03:24 Point started: ret=0 16:03:24 point_skyscan result=0 16:03:25 Check angles 16:03:25 SkyScan query 16:03:25 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.415<-16561 Statuses=0009 0009 16:03:25 Msec=0 True Az=64.17 Ze=-68.415 Az status=0009 Ze status=0009 16:03:26 Check angles 16:03:26 SkyScan query 16:03:26 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.4<-17960 Statuses=0009 0009 16:03:26 Msec=750 True Az=81.585 Ze=-89.4 Az status=0009 Ze status=0009 16:03:26 Check angles 16:03:26 SkyScan query 16:03:27 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.34<-19356 Statuses=0009 0009 16:03:27 Msec=1500 True Az=99.12 Ze=-110.34 Az status=0009 Ze status=0009 16:03:27 Check angles 16:03:27 SkyScan query 16:03:28 SkyScan query done: ret=0 az=116.565<-7771 ze=-131.265<-20751 Statuses=0009 0009 16:03:28 Msec=2250 True Az=116.565 Ze=-131.265 Az status=0009 Ze status=0009 16:03:28 Check angles 16:03:28 SkyScan query 16:03:28 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 16:03:28 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 16:03:29 Check angles 16:03:29 SkyScan query 16:03:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:03:29 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:03:29 Message to Master queued w/err=0: serial=226590 error=0 16:03:34 Received message from Master: op=Filter serial=226591 16:03:34 Color wheel filter change from 0 to 0 16:03:34 FLIGetFilterPos err=0 currentPosition=0 16:03:34 FLIGetStepsRemaining err=0 RemainingSteps=0 16:03:34 Filter is already there-color wheel unchanged 16:03:34 Received message from Master: op=Shutter serial=226592 16:03:34 Shutter LASER close 16:03:34 Received message from Camera: op=State serial=226594 16:03:34 GetSingleValue result=40 Value=cccccccc 16:03:34 SkyScan query 16:03:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:03:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:35 Parameters OK 16:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:35 Set A/D data flow result=40 16:03:35 Set A/D channel type result=40 16:03:35 Set A/D encoding result=40 16:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:35 Set channel filter=0.000000e+000 result=40 16:03:35 Config A/D Result=40 16:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:35 Get A/D filter: -9.255963e+061 result=40 16:03:35 Get A/D value=-858993460 result=40 16:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:35 Parameters OK 16:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:35 Set A/D data flow result=40 16:03:35 Set A/D channel type result=40 16:03:35 Set A/D encoding result=40 16:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:35 Set channel filter=0.000000e+000 result=40 16:03:35 Config A/D Result=40 16:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:35 Get A/D filter: -9.255963e+061 result=40 16:03:35 Get A/D value=-858993460 result=40 16:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:03:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:03:35 Aux= 16:03:35 Message to Camera, serial 226594 queued 16:04:12 Received message from Master: op=PointingHead serial=226607 16:04:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:04:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:04:12 Point started: ret=0 16:04:12 point_skyscan result=0 16:04:13 Check angles 16:04:13 SkyScan query 16:04:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 16:04:13 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 16:04:14 Check angles 16:04:14 SkyScan query 16:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:04:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:04:14 Message to Master queued w/err=0: serial=226607 error=0 16:04:19 Received message from Master: op=Filter serial=226608 16:04:19 Color wheel filter change from 0 to 0 16:04:19 FLIGetFilterPos err=0 currentPosition=0 16:04:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:04:19 Filter is already there-color wheel unchanged 16:04:19 Received message from Master: op=Shutter serial=226609 16:04:19 Shutter LASER open 16:04:20 Received message from Camera: op=State serial=226611 16:04:20 GetSingleValue result=40 Value=cccccccc 16:04:20 SkyScan query 16:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:04:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:20 Parameters OK 16:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:20 Set A/D data flow result=40 16:04:20 Set A/D channel type result=40 16:04:20 Set A/D encoding result=40 16:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:20 Set channel filter=0.000000e+000 result=40 16:04:20 Config A/D Result=40 16:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:20 Get A/D filter: -9.255963e+061 result=40 16:04:20 Get A/D value=-858993460 result=40 16:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:20 Parameters OK 16:04:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:20 Set A/D data flow result=40 16:04:20 Set A/D channel type result=40 16:04:20 Set A/D encoding result=40 16:04:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:20 Set channel filter=0.000000e+000 result=40 16:04:20 Config A/D Result=40 16:04:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:20 Get A/D filter: -9.255963e+061 result=40 16:04:20 Get A/D value=-858993460 result=40 16:04:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:04:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:04:20 Aux= 16:04:20 Message to Camera, serial 226611 queued 16:04:29 Received message from Master: op=Shutter serial=226621 16:04:29 Shutter LASER close 16:04:29 Received message from Master: op=PointingHead serial=226625 16:04:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:04:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:04:29 Point started: ret=0 16:04:29 point_skyscan result=0 16:04:30 Check angles 16:04:30 SkyScan query 16:04:31 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.725<-21515 Statuses=0009 0009 16:04:31 Msec=0 True Az=136.395 Ze=-142.725 Az status=0009 Ze status=0009 16:04:31 Check angles 16:04:31 SkyScan query 16:04:32 SkyScan query done: ret=0 az=154.29<-10286 ze=-121.32<-20088 Statuses=0009 0009 16:04:32 Msec=750 True Az=154.29 Ze=-121.32 Az status=0009 Ze status=0009 16:04:32 Check angles 16:04:32 SkyScan query 16:04:32 SkyScan query done: ret=0 az=171.705<-11447 ze=-100.32<-18688 Statuses=0009 0009 16:04:32 Msec=1500 True Az=171.705 Ze=-100.32 Az status=0009 Ze status=0009 16:04:33 Check angles 16:04:33 SkyScan query 16:04:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.38<-17292 Statuses=0008 0009 16:04:33 Msec=2250 True Az=175.995 Ze=-79.38 Az status=0008 Ze status=0009 16:04:33 Check angles 16:04:33 SkyScan query 16:04:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.395<-15893 Statuses=0008 0009 16:04:34 Msec=3000 True Az=175.995 Ze=-58.395 Az status=0008 Ze status=0009 16:04:34 Check angles 16:04:34 SkyScan query 16:04:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:04:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:04:35 Message to Master queued w/err=0: serial=226625 error=0 16:04:40 Received message from Master: op=Filter serial=226626 16:04:40 Color wheel filter change from 0 to 0 16:04:40 FLIGetFilterPos err=0 currentPosition=0 16:04:40 FLIGetStepsRemaining err=0 RemainingSteps=0 16:04:40 Filter is already there-color wheel unchanged 16:04:40 Received message from Master: op=Shutter serial=226627 16:04:40 Shutter LASER close 16:04:40 Received message from Camera: op=State serial=226629 16:04:40 GetSingleValue result=40 Value=cccccccc 16:04:40 SkyScan query 16:04:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:04:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:41 Parameters OK 16:04:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:41 Set A/D data flow result=40 16:04:41 Set A/D channel type result=40 16:04:41 Set A/D encoding result=40 16:04:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:41 Set channel filter=0.000000e+000 result=40 16:04:41 Config A/D Result=40 16:04:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:41 Get A/D filter: -9.255963e+061 result=40 16:04:41 Get A/D value=-858993460 result=40 16:04:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:41 Parameters OK 16:04:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:41 Set A/D data flow result=40 16:04:41 Set A/D channel type result=40 16:04:41 Set A/D encoding result=40 16:04:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:41 Set channel filter=0.000000e+000 result=40 16:04:41 Config A/D Result=40 16:04:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:41 Get A/D filter: -9.255963e+061 result=40 16:04:41 Get A/D value=-858993460 result=40 16:04:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:04:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:04:41 Aux= 16:04:41 Message to Camera, serial 226629 queued 16:05:17 Received message from Master: op=PointingHead serial=226642 16:05:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:05:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:05:18 Point started: ret=0 16:05:18 point_skyscan result=0 16:05:19 Check angles 16:05:19 SkyScan query 16:05:19 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.795<-13453 Statuses=0009 0009 16:05:19 Msec=0 True Az=152.94 Ze=-21.795 Az status=0009 Ze status=0009 16:05:19 Check angles 16:05:19 SkyScan query 16:05:20 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.825<-12055 Statuses=0009 0009 16:05:20 Msec=750 True Az=135.585 Ze=-0.825 Az status=0009 Ze status=0009 16:05:20 Check angles 16:05:20 SkyScan query 16:05:21 SkyScan query done: ret=0 az=118.035<-7869 ze=20.115<-10659 Statuses=0009 0009 16:05:21 Msec=1500 True Az=118.035 Ze=20.115 Az status=0009 Ze status=0009 16:05:21 Check angles 16:05:21 SkyScan query 16:05:21 SkyScan query done: ret=0 az=100.68<-6712 ze=41.115<-9259 Statuses=0009 0009 16:05:21 Msec=2250 True Az=100.68 Ze=41.115 Az status=0009 Ze status=0009 16:05:22 Check angles 16:05:22 SkyScan query 16:05:22 SkyScan query done: ret=0 az=85.98<-5732 ze=51.54<-8564 Statuses=0009 0008 16:05:22 Msec=3000 True Az=85.98 Ze=51.54 Az status=0009 Ze status=0008 16:05:22 Check angles 16:05:22 SkyScan query 16:05:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:05:23 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:05:23 Message to Master queued w/err=0: serial=226642 error=0 16:05:28 Received message from Master: op=Filter serial=226643 16:05:28 Color wheel filter change from 0 to 0 16:05:28 FLIGetFilterPos err=0 currentPosition=0 16:05:28 FLIGetStepsRemaining err=0 RemainingSteps=0 16:05:28 Filter is already there-color wheel unchanged 16:05:28 Received message from Master: op=Shutter serial=226644 16:05:28 Shutter LASER close 16:05:28 Received message from Camera: op=State serial=226646 16:05:28 GetSingleValue result=40 Value=cccccccc 16:05:28 SkyScan query 16:05:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:05:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:29 Parameters OK 16:05:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:29 Set A/D data flow result=40 16:05:29 Set A/D channel type result=40 16:05:29 Set A/D encoding result=40 16:05:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:29 Set channel filter=0.000000e+000 result=40 16:05:29 Config A/D Result=40 16:05:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:29 Get A/D filter: -9.255963e+061 result=40 16:05:29 Get A/D value=-858993460 result=40 16:05:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:29 Parameters OK 16:05:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:29 Set A/D data flow result=40 16:05:29 Set A/D channel type result=40 16:05:29 Set A/D encoding result=40 16:05:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:29 Set channel filter=0.000000e+000 result=40 16:05:29 Config A/D Result=40 16:05:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:29 Get A/D filter: -9.255963e+061 result=40 16:05:29 Get A/D value=-858993460 result=40 16:05:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:05:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:05:29 Aux= 16:05:29 Message to Camera, serial 226646 queued 16:06:05 Received message from Master: op=PointingHead serial=226659 16:06:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:06:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:06:06 Point started: ret=0 16:06:06 point_skyscan result=0 16:06:07 Check angles 16:06:07 SkyScan query 16:06:07 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 16:06:07 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 16:06:07 Check angles 16:06:07 SkyScan query 16:06:08 SkyScan query done: ret=0 az=126.945<-8463 ze=38.505<-9433 Statuses=0009 0008 16:06:08 Msec=750 True Az=126.945 Ze=38.505 Az status=0009 Ze status=0008 16:06:08 Check angles 16:06:08 SkyScan query 16:06:09 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 16:06:09 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 16:06:09 Check angles 16:06:09 SkyScan query [UTC 2018-12-17 16:06:09] 16:06:09 SkyScan query done: ret=0 az=162.345<-10823 ze=38.505<-9433 Statuses=0009 0008 16:06:10 Msec=2250 True Az=162.345 Ze=38.505 Az status=0009 Ze status=0008 16:06:10 Check angles 16:06:10 SkyScan query 16:06:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 16:06:10 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 16:06:10 Check angles 16:06:10 SkyScan query 16:06:11 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:06:11 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:06:11 Message to Master queued w/err=0: serial=226659 error=0 16:06:16 Received message from Master: op=Filter serial=226660 16:06:16 Color wheel filter change from 0 to 0 16:06:16 FLIGetFilterPos err=0 currentPosition=0 16:06:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:06:16 Filter is already there-color wheel unchanged 16:06:16 Received message from Master: op=Shutter serial=226661 16:06:16 Shutter LASER close 16:06:16 Received message from Camera: op=State serial=226663 16:06:16 GetSingleValue result=40 Value=cccccccc 16:06:16 SkyScan query 16:06:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:06:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:17 Parameters OK 16:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:17 Set A/D data flow result=40 16:06:17 Set A/D channel type result=40 16:06:17 Set A/D encoding result=40 16:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:17 Set channel filter=0.000000e+000 result=40 16:06:17 Config A/D Result=40 16:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:17 Get A/D filter: -9.255963e+061 result=40 16:06:17 Get A/D value=-858993460 result=40 16:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:17 Parameters OK 16:06:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:17 Set A/D data flow result=40 16:06:17 Set A/D channel type result=40 16:06:17 Set A/D encoding result=40 16:06:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:17 Set channel filter=0.000000e+000 result=40 16:06:17 Config A/D Result=40 16:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:17 Get A/D filter: -9.255963e+061 result=40 16:06:17 Get A/D value=-858993460 result=40 16:06:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:06:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:06:17 Aux= 16:06:17 Message to Camera, serial 226663 queued 16:06:54 Received message from Master: op=PointingHead serial=226676 16:06:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:06:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:06:54 Point started: ret=0 16:06:54 point_skyscan result=0 16:06:55 Check angles 16:06:55 SkyScan query 16:06:55 SkyScan query done: ret=0 az=152.715<-10181 ze=8.295<-11447 Statuses=0009 0009 16:06:55 Msec=0 True Az=152.715 Ze=8.295 Az status=0009 Ze status=0009 16:06:55 Check angles 16:06:55 SkyScan query 16:06:56 SkyScan query done: ret=0 az=134.775<-8985 ze=-13.05<-12870 Statuses=0009 0009 16:06:56 Msec=750 True Az=134.775 Ze=-13.05 Az status=0009 Ze status=0009 16:06:56 Check angles 16:06:56 SkyScan query 16:06:57 SkyScan query done: ret=0 az=117.345<-7823 ze=-34.065<-14271 Statuses=0009 0009 16:06:57 Msec=1500 True Az=117.345 Ze=-34.065 Az status=0009 Ze status=0009 16:06:57 Check angles 16:06:57 SkyScan query 16:06:58 SkyScan query done: ret=0 az=99.555<-6637 ze=-51.57<-15438 Statuses=0009 0009 16:06:58 Msec=2250 True Az=99.555 Ze=-51.57 Az status=0009 Ze status=0009 16:06:58 Check angles 16:06:58 SkyScan query 16:06:58 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.525<-15435 Statuses=0009 0008 16:06:58 Msec=3000 True Az=85.98 Ze=-51.525 Az status=0009 Ze status=0008 16:06:59 Check angles 16:06:59 SkyScan query 16:06:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:06:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:06:59 Message to Master queued w/err=0: serial=226676 error=0 16:07:04 Received message from Master: op=Filter serial=226677 16:07:04 Color wheel filter change from 0 to 0 16:07:04 FLIGetFilterPos err=0 currentPosition=0 16:07:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:04 Filter is already there-color wheel unchanged 16:07:04 Received message from Master: op=Shutter serial=226678 16:07:04 Shutter LASER close 16:07:04 Received message from Camera: op=State serial=226680 16:07:04 GetSingleValue result=40 Value=cccccccc 16:07:04 SkyScan query 16:07:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:07:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:05 Parameters OK 16:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:05 Set A/D data flow result=40 16:07:05 Set A/D channel type result=40 16:07:05 Set A/D encoding result=40 16:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:05 Set channel filter=0.000000e+000 result=40 16:07:05 Config A/D Result=40 16:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:05 Get A/D filter: -9.255963e+061 result=40 16:07:05 Get A/D value=-858993460 result=40 16:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:05 Parameters OK 16:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:05 Set A/D data flow result=40 16:07:05 Set A/D channel type result=40 16:07:05 Set A/D encoding result=40 16:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:05 Set channel filter=0.000000e+000 result=40 16:07:05 Config A/D Result=40 16:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:05 Get A/D filter: -9.255963e+061 result=40 16:07:05 Get A/D value=-858993460 result=40 16:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:05 Aux= 16:07:05 Message to Camera, serial 226680 queued 16:07:42 Received message from Master: op=PointingHead serial=226693 16:07:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:07:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:07:42 Point started: ret=0 16:07:42 point_skyscan result=0 16:07:43 Check angles 16:07:43 SkyScan query 16:07:43 SkyScan query done: ret=0 az=109.455<-7297 ze=-81.63<-17442 Statuses=0009 0009 16:07:43 Msec=0 True Az=109.455 Ze=-81.63 Az status=0009 Ze status=0009 16:07:44 Check angles 16:07:44 SkyScan query 16:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.975<-18865 Statuses=0008 0009 16:07:44 Msec=750 True Az=112.995 Ze=-102.975 Az status=0008 Ze status=0009 16:07:44 Check angles 16:07:44 SkyScan query 16:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.945<-20263 Statuses=0008 0009 16:07:45 Msec=1500 True Az=112.995 Ze=-123.945 Az status=0008 Ze status=0009 16:07:45 Check angles 16:07:45 SkyScan query 16:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.335<-21689 Statuses=0008 0009 16:07:46 Msec=2250 True Az=112.995 Ze=-145.335 Az status=0008 Ze status=0009 16:07:46 Check angles 16:07:46 SkyScan query 16:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.74<-23116 Statuses=0008 0009 16:07:46 Msec=3000 True Az=112.995 Ze=-166.74 Az status=0008 Ze status=0009 16:07:47 Check angles 16:07:47 SkyScan query 16:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:07:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:07:47 Message to Master queued w/err=0: serial=226693 error=0 16:07:52 Received message from Master: op=Filter serial=226694 16:07:52 Color wheel filter change from 0 to 0 16:07:52 FLIGetFilterPos err=0 currentPosition=0 16:07:52 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:52 Filter is already there-color wheel unchanged 16:07:52 Received message from Master: op=Shutter serial=226695 16:07:52 Shutter LASER open 16:07:53 Received message from Camera: op=State serial=226697 16:07:53 GetSingleValue result=40 Value=cccccccc 16:07:53 SkyScan query 16:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:07:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:53 Parameters OK 16:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:53 Set A/D data flow result=40 16:07:53 Set A/D channel type result=40 16:07:53 Set A/D encoding result=40 16:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:53 Set channel filter=0.000000e+000 result=40 16:07:53 Config A/D Result=40 16:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:53 Get A/D filter: -9.255963e+061 result=40 16:07:53 Get A/D value=-858993460 result=40 16:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:53 Parameters OK 16:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:53 Set A/D data flow result=40 16:07:53 Set A/D channel type result=40 16:07:53 Set A/D encoding result=40 16:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:53 Set channel filter=0.000000e+000 result=40 16:07:53 Config A/D Result=40 16:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:53 Get A/D filter: -9.255963e+061 result=40 16:07:53 Get A/D value=-858993460 result=40 16:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:53 Aux= 16:07:53 Message to Camera, serial 226697 queued 16:08:02 Received message from Master: op=Shutter serial=226707 16:08:02 Shutter LASER close 16:08:02 Received message from Master: op=PointingHead serial=226711 16:08:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:08:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:08:02 Point started: ret=0 16:08:02 point_skyscan result=0 16:08:03 Check angles 16:08:03 SkyScan query 16:08:04 SkyScan query done: ret=0 az=89.82<-5988 ze=157.05<-1530 Statuses=0009 0009 16:08:04 Msec=0 True Az=89.82 Ze=157.05 Az status=0009 Ze status=0009 16:08:04 Check angles 16:08:04 SkyScan query 16:08:05 SkyScan query done: ret=0 az=71.94<-4796 ze=135.675<-2955 Statuses=0009 0009 16:08:05 Msec=750 True Az=71.94 Ze=135.675 Az status=0009 Ze status=0009 16:08:05 Check angles 16:08:05 SkyScan query 16:08:05 SkyScan query done: ret=0 az=54.51<-3634 ze=114.66<-4356 Statuses=0009 0009 16:08:05 Msec=1500 True Az=54.51 Ze=114.66 Az status=0009 Ze status=0009 16:08:05 Check angles 16:08:05 SkyScan query 16:08:06 SkyScan query done: ret=0 az=41.01<-2734 ze=93.75<-5750 Statuses=0009 0009 16:08:06 Msec=2250 True Az=41.01 Ze=93.75 Az status=0009 Ze status=0009 16:08:06 Check angles 16:08:06 SkyScan query 16:08:07 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 16:08:07 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 16:08:07 Check angles 16:08:07 SkyScan query 16:08:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 16:08:08 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 16:08:08 Check angles 16:08:08 SkyScan query 16:08:08 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 16:08:08 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 16:08:08 Message to Master queued w/err=0: serial=226711 error=0 16:08:13 Received message from Master: op=Filter serial=226712 16:08:13 Color wheel filter change from 0 to 0 16:08:13 FLIGetFilterPos err=0 currentPosition=0 16:08:13 FLIGetStepsRemaining err=0 RemainingSteps=0 16:08:13 Filter is already there-color wheel unchanged 16:08:13 Received message from Master: op=Shutter serial=226713 16:08:13 Shutter LASER close 16:08:14 Received message from Camera: op=State serial=226715 16:08:14 GetSingleValue result=40 Value=cccccccc 16:08:14 SkyScan query 16:08:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:08:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:14 Parameters OK 16:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:14 Set A/D data flow result=40 16:08:14 Set A/D channel type result=40 16:08:14 Set A/D encoding result=40 16:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:14 Set channel filter=0.000000e+000 result=40 16:08:14 Config A/D Result=40 16:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:14 Get A/D filter: -9.255963e+061 result=40 16:08:14 Get A/D value=-858993460 result=40 16:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:14 Parameters OK 16:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:14 Set A/D data flow result=40 16:08:14 Set A/D channel type result=40 16:08:14 Set A/D encoding result=40 16:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:14 Set channel filter=0.000000e+000 result=40 16:08:14 Config A/D Result=40 16:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:14 Get A/D filter: -9.255963e+061 result=40 16:08:14 Get A/D value=-858993460 result=40 16:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:08:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:08:14 Aux= 16:08:14 Message to Camera, serial 226715 queued 16:08:51 Received message from Master: op=PointingHead serial=226728 16:08:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:08:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:08:51 Point started: ret=0 16:08:51 point_skyscan result=0 16:08:52 Check angles 16:08:52 SkyScan query 16:08:53 SkyScan query done: ret=0 az=63.99<-4266 ze=66.54<-7564 Statuses=0009 0008 16:08:53 Msec=0 True Az=63.99 Ze=66.54 Az status=0009 Ze status=0008 16:08:53 Check angles 16:08:53 SkyScan query 16:08:53 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 16:08:53 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 16:08:54 Check angles 16:08:54 SkyScan query 16:08:54 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 16:08:54 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 16:08:54 Check angles 16:08:54 SkyScan query 16:08:55 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 16:08:55 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 16:08:55 Check angles 16:08:55 SkyScan query 16:08:56 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 16:08:56 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 16:08:56 Check angles 16:08:56 SkyScan query 16:08:56 SkyScan query done: ret=0 az=152.025<-10135 ze=66.495<-7567 Statuses=0009 0008 16:08:56 Msec=3750 True Az=152.025 Ze=66.495 Az status=0009 Ze status=0008 16:08:57 Check angles 16:08:57 SkyScan query 16:08:57 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:08:57 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:08:57 Message to Master queued w/err=0: serial=226728 error=0 16:09:02 Received message from Master: op=Filter serial=226729 16:09:02 Color wheel filter change from 0 to 0 16:09:02 FLIGetFilterPos err=0 currentPosition=0 16:09:02 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:02 Filter is already there-color wheel unchanged 16:09:02 Received message from Master: op=Shutter serial=226730 16:09:02 Shutter LASER close 16:09:02 Received message from Camera: op=State serial=226732 16:09:02 GetSingleValue result=40 Value=cccccccc 16:09:02 SkyScan query 16:09:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:09:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:03 Parameters OK 16:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:03 Set A/D data flow result=40 16:09:03 Set A/D channel type result=40 16:09:03 Set A/D encoding result=40 16:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:03 Set channel filter=0.000000e+000 result=40 16:09:03 Config A/D Result=40 16:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:03 Get A/D filter: -9.255963e+061 result=40 16:09:03 Get A/D value=-858993460 result=40 16:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:03 Parameters OK 16:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:03 Set A/D data flow result=40 16:09:03 Set A/D channel type result=40 16:09:03 Set A/D encoding result=40 16:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:03 Set channel filter=0.000000e+000 result=40 16:09:03 Config A/D Result=40 16:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:03 Get A/D filter: -9.255963e+061 result=40 16:09:03 Get A/D value=-858993460 result=40 16:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:03 Aux= 16:09:03 Message to Camera, serial 226732 queued 16:09:40 Received message from Master: op=PointingHead serial=226745 16:09:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:09:40 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:09:40 Point started: ret=0 16:09:40 point_skyscan result=0 16:09:41 Check angles 16:09:41 SkyScan query 16:09:42 SkyScan query done: ret=0 az=135.255<-9017 ze=36.975<-9535 Statuses=0009 0009 16:09:42 Msec=0 True Az=135.255 Ze=36.975 Az status=0009 Ze status=0009 16:09:42 Check angles 16:09:42 SkyScan query 16:09:42 SkyScan query done: ret=0 az=117.72<-7848 ze=16.005<-10933 Statuses=0009 0009 16:09:42 Msec=750 True Az=117.72 Ze=16.005 Az status=0009 Ze status=0009 16:09:42 Check angles 16:09:42 SkyScan query 16:09:43 SkyScan query done: ret=0 az=100.365<-6691 ze=-4.935<-12329 Statuses=0009 0009 16:09:43 Msec=1500 True Az=100.365 Ze=-4.935 Az status=0009 Ze status=0009 16:09:43 Check angles 16:09:43 SkyScan query 16:09:44 SkyScan query done: ret=0 az=82.83<-5522 ze=-25.875<-13725 Statuses=0009 0009 16:09:44 Msec=2250 True Az=82.83 Ze=-25.875 Az status=0009 Ze status=0009 16:09:44 Check angles 16:09:44 SkyScan query 16:09:45 SkyScan query done: ret=0 az=65.325<-4355 ze=-38.58<-14572 Statuses=0009 0008 16:09:45 Msec=3000 True Az=65.325 Ze=-38.58 Az status=0009 Ze status=0008 16:09:45 Check angles 16:09:45 SkyScan query 16:09:45 SkyScan query done: ret=0 az=47.805<-3187 ze=-38.52<-14568 Statuses=0009 0008 16:09:45 Msec=3750 True Az=47.805 Ze=-38.52 Az status=0009 Ze status=0008 16:09:45 Check angles 16:09:45 SkyScan query 16:09:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:09:46 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:09:46 Message to Master queued w/err=0: serial=226745 error=0 16:09:51 Received message from Master: op=Filter serial=226746 16:09:51 Color wheel filter change from 0 to 0 16:09:51 FLIGetFilterPos err=0 currentPosition=0 16:09:51 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:51 Filter is already there-color wheel unchanged 16:09:51 Received message from Master: op=Shutter serial=226747 16:09:51 Shutter LASER close 16:09:51 Received message from Camera: op=State serial=226749 16:09:51 GetSingleValue result=40 Value=cccccccc 16:09:51 SkyScan query 16:09:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:09:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:52 Parameters OK 16:09:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:52 Set A/D data flow result=40 16:09:52 Set A/D channel type result=40 16:09:52 Set A/D encoding result=40 16:09:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:52 Set channel filter=0.000000e+000 result=40 16:09:52 Config A/D Result=40 16:09:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:52 Get A/D filter: -9.255963e+061 result=40 16:09:52 Get A/D value=-858993460 result=40 16:09:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:52 Parameters OK 16:09:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:52 Set A/D data flow result=40 16:09:52 Set A/D channel type result=40 16:09:52 Set A/D encoding result=40 16:09:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:52 Set channel filter=0.000000e+000 result=40 16:09:52 Config A/D Result=40 16:09:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:52 Get A/D filter: -9.255963e+061 result=40 16:09:52 Get A/D value=-858993460 result=40 16:09:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:52 Aux= 16:09:52 Message to Camera, serial 226749 queued 16:10:28 Received message from Master: op=PointingHead serial=226761 16:10:28 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:10:28 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:10:28 Point started: ret=0 16:10:28 point_skyscan result=0 16:10:29 Check angles 16:10:29 SkyScan query 16:10:29 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.355<-16557 Statuses=0009 0009 16:10:29 Msec=0 True Az=64.17 Ze=-68.355 Az status=0009 Ze status=0009 16:10:30 Check angles 16:10:30 SkyScan query 16:10:30 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.385<-17959 Statuses=0009 0009 16:10:30 Msec=750 True Az=81.615 Ze=-89.385 Az status=0009 Ze status=0009 16:10:30 Check angles 16:10:30 SkyScan query 16:10:31 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.265<-19351 Statuses=0009 0009 16:10:31 Msec=1500 True Az=99.09 Ze=-110.265 Az status=0009 Ze status=0009 16:10:31 Check angles 16:10:31 SkyScan query 16:10:32 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.22<-20748 Statuses=0009 0009 16:10:32 Msec=2250 True Az=116.55 Ze=-131.22 Az status=0009 Ze status=0009 16:10:32 Check angles 16:10:32 SkyScan query 16:10:32 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 16:10:32 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 16:10:33 Check angles 16:10:33 SkyScan query 16:10:33 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:10:33 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:10:33 Message to Master queued w/err=0: serial=226761 error=0 16:10:38 Received message from Master: op=Filter serial=226762 16:10:38 Color wheel filter change from 0 to 0 16:10:38 FLIGetFilterPos err=0 currentPosition=0 16:10:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:10:38 Filter is already there-color wheel unchanged 16:10:38 Received message from Master: op=Shutter serial=226763 16:10:38 Shutter LASER close 16:10:38 Received message from Camera: op=State serial=226765 16:10:38 GetSingleValue result=40 Value=cccccccc 16:10:38 SkyScan query 16:10:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:10:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:39 Parameters OK 16:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:39 Set A/D data flow result=40 16:10:39 Set A/D channel type result=40 16:10:39 Set A/D encoding result=40 16:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:39 Set channel filter=0.000000e+000 result=40 16:10:39 Config A/D Result=40 16:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:39 Get A/D filter: -9.255963e+061 result=40 16:10:39 Get A/D value=-858993460 result=40 16:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:39 Parameters OK 16:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:39 Set A/D data flow result=40 16:10:39 Set A/D channel type result=40 16:10:39 Set A/D encoding result=40 16:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:39 Set channel filter=0.000000e+000 result=40 16:10:39 Config A/D Result=40 16:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:39 Get A/D filter: -9.255963e+061 result=40 16:10:39 Get A/D value=-858993460 result=40 16:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:10:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:10:39 Aux= 16:10:39 Message to Camera, serial 226765 queued 16:11:16 Received message from Master: op=PointingHead serial=226778 16:11:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:11:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:11:16 Point started: ret=0 16:11:16 point_skyscan result=0 16:11:17 Check angles 16:11:17 SkyScan query 16:11:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.91<-23394 Statuses=0009 0009 16:11:17 Msec=0 True Az=113.01 Ze=-170.91 Az status=0009 Ze status=0009 16:11:18 Check angles 16:11:18 SkyScan query 16:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:11:18 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:11:18 Message to Master queued w/err=0: serial=226778 error=0 16:11:23 Received message from Master: op=Filter serial=226779 16:11:23 Color wheel filter change from 0 to 0 16:11:23 FLIGetFilterPos err=0 currentPosition=0 16:11:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:11:23 Filter is already there-color wheel unchanged 16:11:23 Received message from Master: op=Shutter serial=226780 16:11:23 Shutter LASER open 16:11:24 Received message from Camera: op=State serial=226782 16:11:24 GetSingleValue result=40 Value=cccccccc 16:11:24 SkyScan query 16:11:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:11:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:24 Parameters OK 16:11:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:24 Set A/D data flow result=40 16:11:24 Set A/D channel type result=40 16:11:24 Set A/D encoding result=40 16:11:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:24 Set channel filter=0.000000e+000 result=40 16:11:24 Config A/D Result=40 16:11:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:24 Get A/D filter: -9.255963e+061 result=40 16:11:24 Get A/D value=-858993460 result=40 16:11:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:24 Parameters OK 16:11:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:24 Set A/D data flow result=40 16:11:24 Set A/D channel type result=40 16:11:24 Set A/D encoding result=40 16:11:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:24 Set channel filter=0.000000e+000 result=40 16:11:24 Config A/D Result=40 16:11:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:24 Get A/D filter: -9.255963e+061 result=40 16:11:24 Get A/D value=-858993460 result=40 16:11:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:11:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:11:24 Aux= 16:11:24 Message to Camera, serial 226782 queued 16:11:33 Received message from Master: op=Shutter serial=226792 16:11:33 Shutter LASER close 16:11:33 Received message from Master: op=PointingHead serial=226796 16:11:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:11:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:11:33 Point started: ret=0 16:11:33 point_skyscan result=0 16:11:34 Check angles 16:11:34 SkyScan query 16:11:35 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.43<-21562 Statuses=0009 0009 16:11:35 Msec=0 True Az=135.885 Ze=-143.43 Az status=0009 Ze status=0009 16:11:35 Check angles 16:11:35 SkyScan query 16:11:36 SkyScan query done: ret=0 az=153.285<-10219 ze=-122.43<-20162 Statuses=0009 0009 16:11:36 Msec=750 True Az=153.285 Ze=-122.43 Az status=0009 Ze status=0009 16:11:36 Check angles 16:11:36 SkyScan query 16:11:36 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.535<-18769 Statuses=0009 0009 16:11:36 Msec=1500 True Az=170.835 Ze=-101.535 Az status=0009 Ze status=0009 16:11:36 Check angles 16:11:36 SkyScan query 16:11:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.535<-17369 Statuses=0008 0009 16:11:37 Msec=2250 True Az=175.995 Ze=-80.535 Az status=0008 Ze status=0009 16:11:37 Check angles 16:11:37 SkyScan query 16:11:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.595<-15973 Statuses=0008 0009 16:11:38 Msec=3000 True Az=175.995 Ze=-59.595 Az status=0008 Ze status=0009 16:11:38 Check angles 16:11:38 SkyScan query 16:11:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:11:39 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:11:39 Message to Master queued w/err=0: serial=226796 error=0 16:11:44 Received message from Master: op=Filter serial=226797 16:11:44 Color wheel filter change from 0 to 0 16:11:44 FLIGetFilterPos err=0 currentPosition=0 16:11:44 FLIGetStepsRemaining err=0 RemainingSteps=0 16:11:44 Filter is already there-color wheel unchanged 16:11:44 Received message from Master: op=Shutter serial=226798 16:11:44 Shutter LASER close 16:11:44 Received message from Camera: op=State serial=226800 16:11:44 GetSingleValue result=40 Value=cccccccc 16:11:44 SkyScan query 16:11:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:11:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:44 Parameters OK 16:11:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:44 Set A/D data flow result=40 16:11:44 Set A/D channel type result=40 16:11:44 Set A/D encoding result=40 16:11:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:44 Set channel filter=0.000000e+000 result=40 16:11:44 Config A/D Result=40 16:11:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:44 Get A/D filter: -9.255963e+061 result=40 16:11:44 Get A/D value=-858993460 result=40 16:11:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:44 Parameters OK 16:11:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:44 Set A/D data flow result=40 16:11:44 Set A/D channel type result=40 16:11:44 Set A/D encoding result=40 16:11:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:44 Set channel filter=0.000000e+000 result=40 16:11:44 Config A/D Result=40 16:11:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:44 Get A/D filter: -9.255963e+061 result=40 16:11:44 Get A/D value=-858993460 result=40 16:11:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:11:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:11:44 Aux= 16:11:44 Message to Camera, serial 226800 queued 16:12:21 Received message from Master: op=PointingHead serial=226813 16:12:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:12:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:12:22 Point started: ret=0 16:12:22 point_skyscan result=0 16:12:22 Check angles 16:12:22 SkyScan query 16:12:23 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.765<-13451 Statuses=0009 0009 16:12:23 Msec=0 True Az=152.925 Ze=-21.765 Az status=0009 Ze status=0009 16:12:23 Check angles 16:12:23 SkyScan query 16:12:24 SkyScan query done: ret=0 az=135.555<-9037 ze=-0.795<-12053 Statuses=0009 0009 16:12:24 Msec=750 True Az=135.555 Ze=-0.795 Az status=0009 Ze status=0009 16:12:24 Check angles 16:12:24 SkyScan query 16:12:24 SkyScan query done: ret=0 az=118.08<-7872 ze=20.13<-10658 Statuses=0009 0009 16:12:24 Msec=1500 True Az=118.08 Ze=20.13 Az status=0009 Ze status=0009 16:12:25 Check angles 16:12:25 SkyScan query 16:12:25 SkyScan query done: ret=0 az=100.665<-6711 ze=41.13<-9258 Statuses=0009 0009 16:12:25 Msec=2250 True Az=100.665 Ze=41.13 Az status=0009 Ze status=0009 16:12:25 Check angles 16:12:25 SkyScan query 16:12:26 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 16:12:26 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 16:12:26 Check angles 16:12:26 SkyScan query 16:12:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:12:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:12:27 Message to Master queued w/err=0: serial=226813 error=0 16:12:32 Received message from Master: op=Filter serial=226814 16:12:32 Color wheel filter change from 0 to 0 16:12:32 FLIGetFilterPos err=0 currentPosition=0 16:12:32 FLIGetStepsRemaining err=0 RemainingSteps=0 16:12:32 Filter is already there-color wheel unchanged 16:12:32 Received message from Master: op=Shutter serial=226815 16:12:32 Shutter LASER close 16:12:32 Received message from Camera: op=State serial=226817 16:12:32 GetSingleValue result=40 Value=cccccccc 16:12:32 SkyScan query 16:12:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:12:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:33 Parameters OK 16:12:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:33 Set A/D data flow result=40 16:12:33 Set A/D channel type result=40 16:12:33 Set A/D encoding result=40 16:12:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:33 Set channel filter=0.000000e+000 result=40 16:12:33 Config A/D Result=40 16:12:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:33 Get A/D filter: -9.255963e+061 result=40 16:12:33 Get A/D value=-858993460 result=40 16:12:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:33 Parameters OK 16:12:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:33 Set A/D data flow result=40 16:12:33 Set A/D channel type result=40 16:12:33 Set A/D encoding result=40 16:12:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:33 Set channel filter=0.000000e+000 result=40 16:12:33 Config A/D Result=40 16:12:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:33 Get A/D filter: -9.255963e+061 result=40 16:12:33 Get A/D value=-858993460 result=40 16:12:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:12:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:12:33 Aux= 16:12:33 Message to Camera, serial 226817 queued 16:13:09 Received message from Master: op=PointingHead serial=226830 16:13:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:13:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:13:10 Point started: ret=0 16:13:10 point_skyscan result=0 16:13:10 Check angles 16:13:10 SkyScan query 16:13:11 SkyScan query done: ret=0 az=109.35<-7290 ze=38.49<-9434 Statuses=0009 0008 16:13:11 Msec=0 True Az=109.35 Ze=38.49 Az status=0009 Ze status=0008 16:13:11 Check angles 16:13:11 SkyScan query 16:13:12 SkyScan query done: ret=0 az=126.885<-8459 ze=38.505<-9433 Statuses=0009 0008 16:13:12 Msec=750 True Az=126.885 Ze=38.505 Az status=0009 Ze status=0008 16:13:12 Check angles 16:13:12 SkyScan query 16:13:13 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 16:13:13 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 16:13:13 Check angles 16:13:13 SkyScan query 16:13:13 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 16:13:13 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 16:13:13 Check angles 16:13:13 SkyScan query 16:13:14 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:13:14 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:13:14 Check angles 16:13:14 SkyScan query 16:13:15 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:13:15 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:13:15 Message to Master queued w/err=0: serial=226830 error=0 16:13:20 Received message from Master: op=Filter serial=226831 16:13:20 Color wheel filter change from 0 to 0 16:13:20 FLIGetFilterPos err=0 currentPosition=0 16:13:20 FLIGetStepsRemaining err=0 RemainingSteps=0 16:13:20 Filter is already there-color wheel unchanged 16:13:20 Received message from Master: op=Shutter serial=226832 16:13:20 Shutter LASER close 16:13:20 Received message from Camera: op=State serial=226834 16:13:20 GetSingleValue result=40 Value=cccccccc 16:13:20 SkyScan query 16:13:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:13:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:21 Parameters OK 16:13:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:21 Set A/D data flow result=40 16:13:21 Set A/D channel type result=40 16:13:21 Set A/D encoding result=40 16:13:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:21 Set channel filter=0.000000e+000 result=40 16:13:21 Config A/D Result=40 16:13:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:21 Get A/D filter: -9.255963e+061 result=40 16:13:21 Get A/D value=-858993460 result=40 16:13:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:21 Parameters OK 16:13:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:21 Set A/D data flow result=40 16:13:21 Set A/D channel type result=40 16:13:21 Set A/D encoding result=40 16:13:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:21 Set channel filter=0.000000e+000 result=40 16:13:21 Config A/D Result=40 16:13:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:21 Get A/D filter: -9.255963e+061 result=40 16:13:21 Get A/D value=-858993460 result=40 16:13:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:21 Aux= 16:13:21 Message to Camera, serial 226834 queued 16:13:57 Received message from Master: op=PointingHead serial=226847 16:13:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:13:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:13:58 Point started: ret=0 16:13:58 point_skyscan result=0 16:13:59 Check angles 16:13:59 SkyScan query 16:13:59 SkyScan query done: ret=0 az=152.58<-10172 ze=7.995<-11467 Statuses=0009 0009 16:13:59 Msec=0 True Az=152.58 Ze=7.995 Az status=0009 Ze status=0009 16:13:59 Check angles 16:13:59 SkyScan query 16:14:00 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.735<-12849 Statuses=0009 0009 16:14:00 Msec=750 True Az=135.12 Ze=-12.735 Az status=0009 Ze status=0009 16:14:00 Check angles 16:14:00 SkyScan query 16:14:01 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.78<-14252 Statuses=0009 0009 16:14:01 Msec=1500 True Az=117.615 Ze=-33.78 Az status=0009 Ze status=0009 16:14:01 Check angles 16:14:01 SkyScan query 16:14:01 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.57<-15438 Statuses=0009 0009 16:14:01 Msec=2250 True Az=100.23 Ze=-51.57 Az status=0009 Ze status=0009 16:14:02 Check angles 16:14:02 SkyScan query 16:14:02 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:14:02 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:14:02 Check angles 16:14:02 SkyScan query 16:14:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:14:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:14:03 Message to Master queued w/err=0: serial=226847 error=0 16:14:08 Received message from Master: op=Filter serial=226848 16:14:08 Color wheel filter change from 0 to 0 16:14:08 FLIGetFilterPos err=0 currentPosition=0 16:14:08 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:08 Filter is already there-color wheel unchanged 16:14:08 Received message from Master: op=Shutter serial=226849 16:14:08 Shutter LASER close 16:14:08 Received message from Camera: op=State serial=226851 16:14:08 GetSingleValue result=40 Value=cccccccc 16:14:08 SkyScan query 16:14:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:14:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:09 Parameters OK 16:14:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:09 Set A/D data flow result=40 16:14:09 Set A/D channel type result=40 16:14:09 Set A/D encoding result=40 16:14:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:09 Set channel filter=0.000000e+000 result=40 16:14:09 Config A/D Result=40 16:14:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:09 Get A/D filter: -9.255963e+061 result=40 16:14:09 Get A/D value=-858993460 result=40 16:14:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:09 Parameters OK 16:14:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:09 Set A/D data flow result=40 16:14:09 Set A/D channel type result=40 16:14:09 Set A/D encoding result=40 16:14:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:09 Set channel filter=0.000000e+000 result=40 16:14:09 Config A/D Result=40 16:14:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:09 Get A/D filter: -9.255963e+061 result=40 16:14:09 Get A/D value=-858993460 result=40 16:14:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:09 Aux= 16:14:09 Message to Camera, serial 226851 queued 16:14:46 Received message from Master: op=PointingHead serial=226864 16:14:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:14:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:14:46 Point started: ret=0 16:14:46 point_skyscan result=0 16:14:47 Check angles 16:14:47 SkyScan query 16:14:47 SkyScan query done: ret=0 az=108.72<-7248 ze=-80.97<-17398 Statuses=0009 0009 16:14:47 Msec=0 True Az=108.72 Ze=-80.97 Az status=0009 Ze status=0009 16:14:47 Check angles 16:14:47 SkyScan query 16:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.94<-18796 Statuses=0008 0009 16:14:48 Msec=750 True Az=112.995 Ze=-101.94 Az status=0008 Ze status=0009 16:14:48 Check angles 16:14:48 SkyScan query 16:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.88<-20192 Statuses=0008 0009 16:14:49 Msec=1500 True Az=112.995 Ze=-122.88 Az status=0008 Ze status=0009 16:14:49 Check angles 16:14:49 SkyScan query 16:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.865<-21591 Statuses=0008 0009 16:14:49 Msec=2250 True Az=112.995 Ze=-143.865 Az status=0008 Ze status=0009 16:14:50 Check angles 16:14:50 SkyScan query 16:14:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.82<-22988 Statuses=0008 0009 16:14:50 Msec=3000 True Az=112.995 Ze=-164.82 Az status=0008 Ze status=0009 16:14:50 Check angles 16:14:50 SkyScan query 16:14:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:14:51 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:14:51 Message to Master queued w/err=0: serial=226864 error=0 16:14:56 Received message from Master: op=Filter serial=226865 16:14:56 Color wheel filter change from 0 to 0 16:14:56 FLIGetFilterPos err=0 currentPosition=0 16:14:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:56 Filter is already there-color wheel unchanged 16:14:56 Received message from Master: op=Shutter serial=226866 16:14:56 Shutter LASER open 16:14:56 Received message from Camera: op=State serial=226868 16:14:56 GetSingleValue result=40 Value=cccccccc 16:14:56 SkyScan query 16:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:14:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:57 Parameters OK 16:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:57 Set A/D data flow result=40 16:14:57 Set A/D channel type result=40 16:14:57 Set A/D encoding result=40 16:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:57 Set channel filter=0.000000e+000 result=40 16:14:57 Config A/D Result=40 16:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:57 Get A/D filter: -9.255963e+061 result=40 16:14:57 Get A/D value=-858993460 result=40 16:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:57 Parameters OK 16:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:57 Set A/D data flow result=40 16:14:57 Set A/D channel type result=40 16:14:57 Set A/D encoding result=40 16:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:57 Set channel filter=0.000000e+000 result=40 16:14:57 Config A/D Result=40 16:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:57 Get A/D filter: -9.255963e+061 result=40 16:14:57 Get A/D value=-858993460 result=40 16:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:57 Aux= 16:14:57 Message to Camera, serial 226868 queued 16:15:05 Received message from Master: op=Shutter serial=226878 16:15:05 Shutter LASER close 16:15:06 Received message from Master: op=PointingHead serial=226882 16:15:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:15:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:15:06 Point started: ret=0 16:15:06 point_skyscan result=0 16:15:07 Check angles 16:15:07 SkyScan query 16:15:07 SkyScan query done: ret=0 az=90.09<-6006 ze=157.515<-1499 Statuses=0009 0009 16:15:07 Msec=0 True Az=90.09 Ze=157.515 Az status=0009 Ze status=0009 16:15:08 Check angles 16:15:08 SkyScan query 16:15:08 SkyScan query done: ret=0 az=72.645<-4843 ze=136.53<-2898 Statuses=0009 0009 16:15:08 Msec=750 True Az=72.645 Ze=136.53 Az status=0009 Ze status=0009 16:15:08 Check angles 16:15:08 SkyScan query 16:15:09 SkyScan query done: ret=0 az=55.215<-3681 ze=115.605<-4293 Statuses=0009 0009 16:15:09 Msec=1500 True Az=55.215 Ze=115.605 Az status=0009 Ze status=0009 16:15:09 Check angles 16:15:09 SkyScan query 16:15:10 SkyScan query done: ret=0 az=41.01<-2734 ze=94.605<-5693 Statuses=0009 0009 16:15:10 Msec=2250 True Az=41.01 Ze=94.605 Az status=0009 Ze status=0009 16:15:10 Check angles 16:15:10 SkyScan query 16:15:10 SkyScan query done: ret=0 az=40.98<-2732 ze=73.695<-7087 Statuses=0008 0009 16:15:10 Msec=3000 True Az=40.98 Ze=73.695 Az status=0008 Ze status=0009 16:15:11 Check angles 16:15:11 SkyScan query 16:15:11 SkyScan query done: ret=0 az=40.98<-2732 ze=52.995<-8467 Statuses=0008 0009 16:15:11 Msec=3750 True Az=40.98 Ze=52.995 Az status=0008 Ze status=0009 16:15:11 Check angles 16:15:11 SkyScan query 16:15:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:15:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:15:12 Message to Master queued w/err=0: serial=226882 error=0 16:15:17 Received message from Master: op=Filter serial=226883 16:15:17 Color wheel filter change from 0 to 0 16:15:17 FLIGetFilterPos err=0 currentPosition=0 16:15:17 FLIGetStepsRemaining err=0 RemainingSteps=0 16:15:17 Filter is already there-color wheel unchanged 16:15:17 Received message from Master: op=Shutter serial=226884 16:15:17 Shutter LASER close 16:15:17 Received message from Camera: op=State serial=226886 16:15:17 GetSingleValue result=40 Value=cccccccc 16:15:17 SkyScan query 16:15:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:15:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:18 Parameters OK 16:15:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:18 Set A/D data flow result=40 16:15:18 Set A/D channel type result=40 16:15:18 Set A/D encoding result=40 16:15:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:18 Set channel filter=0.000000e+000 result=40 16:15:18 Config A/D Result=40 16:15:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:18 Get A/D filter: -9.255963e+061 result=40 16:15:18 Get A/D value=-858993460 result=40 16:15:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:18 Parameters OK 16:15:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:18 Set A/D data flow result=40 16:15:18 Set A/D channel type result=40 16:15:18 Set A/D encoding result=40 16:15:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:18 Set channel filter=0.000000e+000 result=40 16:15:18 Config A/D Result=40 16:15:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:18 Get A/D filter: -9.255963e+061 result=40 16:15:18 Get A/D value=-858993460 result=40 16:15:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:15:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:15:18 Aux= 16:15:18 Message to Camera, serial 226886 queued 16:15:27 Received message from Master: op=Identify serial=226887 [UTC 2018-12-17 16:15:52] 16:15:55 Received message from Master: op=PointingHead serial=226902 16:15:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:15:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:15:55 Point started: ret=0 16:15:55 point_skyscan result=0 16:15:56 Check angles 16:15:56 SkyScan query 16:15:56 SkyScan query done: ret=0 az=64.245<-4283 ze=66.54<-7564 Statuses=0009 0008 16:15:56 Msec=0 True Az=64.245 Ze=66.54 Az status=0009 Ze status=0008 16:15:57 Check angles 16:15:57 SkyScan query 16:15:57 SkyScan query done: ret=0 az=81.57<-5438 ze=66.51<-7566 Statuses=0009 0008 16:15:57 Msec=750 True Az=81.57 Ze=66.51 Az status=0009 Ze status=0008 16:15:57 Check angles 16:15:57 SkyScan query 16:15:58 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 16:15:58 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 16:15:58 Check angles 16:15:58 SkyScan query 16:15:59 SkyScan query done: ret=0 az=116.475<-7765 ze=66.495<-7567 Statuses=0009 0008 16:15:59 Msec=2250 True Az=116.475 Ze=66.495 Az status=0009 Ze status=0008 16:15:59 Check angles 16:15:59 SkyScan query 16:15:59 SkyScan query done: ret=0 az=134.01<-8934 ze=66.495<-7567 Statuses=0009 0008 16:15:59 Msec=3000 True Az=134.01 Ze=66.495 Az status=0009 Ze status=0008 16:16:00 Check angles 16:16:00 SkyScan query 16:16:00 SkyScan query done: ret=0 az=151.38<-10092 ze=66.495<-7567 Statuses=0009 0008 16:16:00 Msec=3750 True Az=151.38 Ze=66.495 Az status=0009 Ze status=0008 16:16:00 Check angles 16:16:00 SkyScan query 16:16:01 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 16:16:01 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 16:16:01 Message to Master queued w/err=0: serial=226902 error=0 16:16:06 Received message from Master: op=Filter serial=226903 16:16:06 Color wheel filter change from 0 to 0 16:16:06 FLIGetFilterPos err=0 currentPosition=0 16:16:06 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:06 Filter is already there-color wheel unchanged 16:16:06 Received message from Master: op=Shutter serial=226904 16:16:06 Shutter LASER close 16:16:06 Received message from Camera: op=State serial=226906 16:16:06 GetSingleValue result=40 Value=cccccccc 16:16:06 SkyScan query 16:16:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:16:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:07 Parameters OK 16:16:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:07 Set A/D data flow result=40 16:16:07 Set A/D channel type result=40 16:16:07 Set A/D encoding result=40 16:16:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:07 Set channel filter=0.000000e+000 result=40 16:16:07 Config A/D Result=40 16:16:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:07 Get A/D filter: -9.255963e+061 result=40 16:16:07 Get A/D value=-858993460 result=40 16:16:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:07 Parameters OK 16:16:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:07 Set A/D data flow result=40 16:16:07 Set A/D channel type result=40 16:16:07 Set A/D encoding result=40 16:16:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:07 Set channel filter=0.000000e+000 result=40 16:16:07 Config A/D Result=40 16:16:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:07 Get A/D filter: -9.255963e+061 result=40 16:16:07 Get A/D value=-858993460 result=40 16:16:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:07 Aux= 16:16:07 Message to Camera, serial 226906 queued 16:16:44 Received message from Master: op=PointingHead serial=226919 16:16:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:16:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:16:44 Point started: ret=0 16:16:44 point_skyscan result=0 16:16:45 Check angles 16:16:45 SkyScan query 16:16:45 SkyScan query done: ret=0 az=134.82<-8988 ze=36.585<-9561 Statuses=0009 0009 16:16:45 Msec=0 True Az=134.82 Ze=36.585 Az status=0009 Ze status=0009 16:16:45 Check angles 16:16:45 SkyScan query 16:16:46 SkyScan query done: ret=0 az=117.33<-7822 ze=15.66<-10956 Statuses=0009 0009 16:16:46 Msec=750 True Az=117.33 Ze=15.66 Az status=0009 Ze status=0009 16:16:46 Check angles 16:16:46 SkyScan query 16:16:47 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.355<-12357 Statuses=0009 0009 16:16:47 Msec=1500 True Az=99.96 Ze=-5.355 Az status=0009 Ze status=0009 16:16:47 Check angles 16:16:47 SkyScan query 16:16:47 SkyScan query done: ret=0 az=82.5<-5500 ze=-26.31<-13754 Statuses=0009 0009 16:16:47 Msec=2250 True Az=82.5 Ze=-26.31 Az status=0009 Ze status=0009 16:16:48 Check angles 16:16:48 SkyScan query 16:16:48 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.58<-14572 Statuses=0009 0008 16:16:48 Msec=3000 True Az=64.875 Ze=-38.58 Az status=0009 Ze status=0008 16:16:48 Check angles 16:16:48 SkyScan query 16:16:49 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.52<-14568 Statuses=0009 0008 16:16:49 Msec=3750 True Az=47.415 Ze=-38.52 Az status=0009 Ze status=0008 16:16:49 Check angles 16:16:49 SkyScan query 16:16:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:16:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:16:50 Message to Master queued w/err=0: serial=226919 error=0 16:16:55 Received message from Master: op=Filter serial=226920 16:16:55 Color wheel filter change from 0 to 0 16:16:55 FLIGetFilterPos err=0 currentPosition=0 16:16:55 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:55 Filter is already there-color wheel unchanged 16:16:55 Received message from Master: op=Shutter serial=226921 16:16:55 Shutter LASER close 16:16:55 Received message from Camera: op=State serial=226923 16:16:55 GetSingleValue result=40 Value=cccccccc 16:16:55 SkyScan query 16:16:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:16:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:56 Parameters OK 16:16:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:56 Set A/D data flow result=40 16:16:56 Set A/D channel type result=40 16:16:56 Set A/D encoding result=40 16:16:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:56 Set channel filter=0.000000e+000 result=40 16:16:56 Config A/D Result=40 16:16:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:56 Get A/D filter: -9.255963e+061 result=40 16:16:56 Get A/D value=-858993460 result=40 16:16:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:56 Parameters OK 16:16:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:56 Set A/D data flow result=40 16:16:56 Set A/D channel type result=40 16:16:56 Set A/D encoding result=40 16:16:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:56 Set channel filter=0.000000e+000 result=40 16:16:56 Config A/D Result=40 16:16:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:56 Get A/D filter: -9.255963e+061 result=40 16:16:56 Get A/D value=-858993460 result=40 16:16:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:56 Aux= 16:16:56 Message to Camera, serial 226923 queued 16:17:32 Received message from Master: op=PointingHead serial=226936 16:17:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:17:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:17:33 Point started: ret=0 16:17:33 point_skyscan result=0 16:17:34 Check angles 16:17:34 SkyScan query 16:17:34 SkyScan query done: ret=0 az=64.35<-4290 ze=-68.775<-16585 Statuses=0009 0009 16:17:34 Msec=0 True Az=64.35 Ze=-68.775 Az status=0009 Ze status=0009 16:17:34 Check angles 16:17:34 SkyScan query 16:17:35 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.7<-17980 Statuses=0009 0009 16:17:35 Msec=750 True Az=81.795 Ze=-89.7 Az status=0009 Ze status=0009 16:17:35 Check angles 16:17:35 SkyScan query 16:17:36 SkyScan query done: ret=0 az=99.735<-6649 ze=-111.06<-19404 Statuses=0009 0009 16:17:36 Msec=1500 True Az=99.735 Ze=-111.06 Az status=0009 Ze status=0009 16:17:36 Check angles 16:17:36 SkyScan query 16:17:36 SkyScan query done: ret=0 az=117.285<-7819 ze=-132.03<-20802 Statuses=0009 0009 16:17:36 Msec=2250 True Az=117.285 Ze=-132.03 Az status=0009 Ze status=0009 16:17:37 Check angles 16:17:37 SkyScan query 16:17:37 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 16:17:37 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 16:17:37 Check angles 16:17:37 SkyScan query 16:17:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:17:38 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:17:38 Message to Master queued w/err=0: serial=226936 error=0 16:17:43 Received message from Master: op=Filter serial=226937 16:17:43 Color wheel filter change from 0 to 0 16:17:43 FLIGetFilterPos err=0 currentPosition=0 16:17:43 FLIGetStepsRemaining err=0 RemainingSteps=0 16:17:43 Filter is already there-color wheel unchanged 16:17:43 Received message from Master: op=Shutter serial=226938 16:17:43 Shutter LASER close 16:17:43 Received message from Camera: op=State serial=226940 16:17:43 GetSingleValue result=40 Value=cccccccc 16:17:43 SkyScan query 16:17:44 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:17:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:44 Parameters OK 16:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:44 Set A/D data flow result=40 16:17:44 Set A/D channel type result=40 16:17:44 Set A/D encoding result=40 16:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:44 Set channel filter=0.000000e+000 result=40 16:17:44 Config A/D Result=40 16:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:44 Get A/D filter: -9.255963e+061 result=40 16:17:44 Get A/D value=-858993460 result=40 16:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:44 Parameters OK 16:17:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:44 Set A/D data flow result=40 16:17:44 Set A/D channel type result=40 16:17:44 Set A/D encoding result=40 16:17:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:44 Set channel filter=0.000000e+000 result=40 16:17:44 Config A/D Result=40 16:17:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:44 Get A/D filter: -9.255963e+061 result=40 16:17:44 Get A/D value=-858993460 result=40 16:17:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:44 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:17:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:17:44 Aux= 16:17:44 Message to Camera, serial 226940 queued 16:18:21 Received message from Master: op=PointingHead serial=226953 16:18:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:18:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:18:21 Point started: ret=0 16:18:21 point_skyscan result=0 16:18:22 Check angles 16:18:22 SkyScan query 16:18:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.24<-23416 Statuses=0009 0009 16:18:22 Msec=0 True Az=113.01 Ze=-171.24 Az status=0009 Ze status=0009 16:18:22 Check angles 16:18:22 SkyScan query 16:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:18:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:18:23 Message to Master queued w/err=0: serial=226953 error=0 16:18:28 Received message from Master: op=Filter serial=226954 16:18:28 Color wheel filter change from 0 to 0 16:18:28 FLIGetFilterPos err=0 currentPosition=0 16:18:28 FLIGetStepsRemaining err=0 RemainingSteps=0 16:18:28 Filter is already there-color wheel unchanged 16:18:28 Received message from Master: op=Shutter serial=226955 16:18:28 Shutter LASER open 16:18:28 Received message from Camera: op=State serial=226957 16:18:28 GetSingleValue result=40 Value=cccccccc 16:18:28 SkyScan query 16:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:18:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:29 Parameters OK 16:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:29 Set A/D data flow result=40 16:18:29 Set A/D channel type result=40 16:18:29 Set A/D encoding result=40 16:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:29 Set channel filter=0.000000e+000 result=40 16:18:29 Config A/D Result=40 16:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:29 Get A/D filter: -9.255963e+061 result=40 16:18:29 Get A/D value=-858993460 result=40 16:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:29 Parameters OK 16:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:29 Set A/D data flow result=40 16:18:29 Set A/D channel type result=40 16:18:29 Set A/D encoding result=40 16:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:29 Set channel filter=0.000000e+000 result=40 16:18:29 Config A/D Result=40 16:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:29 Get A/D filter: -9.255963e+061 result=40 16:18:29 Get A/D value=-858993460 result=40 16:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:18:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:18:29 Aux= 16:18:29 Message to Camera, serial 226957 queued 16:18:37 Received message from Master: op=Shutter serial=226967 16:18:37 Shutter LASER close 16:18:38 Received message from Master: op=PointingHead serial=226971 16:18:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:18:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:18:38 Point started: ret=0 16:18:38 point_skyscan result=0 16:18:39 Check angles 16:18:39 SkyScan query 16:18:40 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.295<-21553 Statuses=0009 0009 16:18:40 Msec=0 True Az=135.975 Ze=-143.295 Az status=0009 Ze status=0009 16:18:40 Check angles 16:18:40 SkyScan query 16:18:40 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.875<-20125 Statuses=0009 0009 16:18:40 Msec=750 True Az=153.9 Ze=-121.875 Az status=0009 Ze status=0009 16:18:41 Check angles 16:18:41 SkyScan query 16:18:41 SkyScan query done: ret=0 az=171.36<-11424 ze=-100.875<-18725 Statuses=0009 0009 16:18:41 Msec=1500 True Az=171.36 Ze=-100.875 Az status=0009 Ze status=0009 16:18:41 Check angles 16:18:41 SkyScan query 16:18:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.01<-17334 Statuses=0008 0009 16:18:42 Msec=2250 True Az=175.995 Ze=-80.01 Az status=0008 Ze status=0009 16:18:42 Check angles 16:18:42 SkyScan query 16:18:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.01<-15934 Statuses=0008 0009 16:18:43 Msec=3000 True Az=175.995 Ze=-59.01 Az status=0008 Ze status=0009 16:18:43 Check angles 16:18:43 SkyScan query 16:18:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:18:43 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:18:43 Message to Master queued w/err=0: serial=226971 error=0 16:18:48 Received message from Master: op=Filter serial=226972 16:18:48 Color wheel filter change from 0 to 0 16:18:48 FLIGetFilterPos err=0 currentPosition=0 16:18:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:18:48 Filter is already there-color wheel unchanged 16:18:49 Received message from Master: op=Shutter serial=226973 16:18:49 Shutter LASER close 16:18:49 Received message from Camera: op=State serial=226975 16:18:49 GetSingleValue result=40 Value=cccccccc 16:18:49 SkyScan query 16:18:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:18:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:49 Parameters OK 16:18:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:49 Set A/D data flow result=40 16:18:49 Set A/D channel type result=40 16:18:49 Set A/D encoding result=40 16:18:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:49 Set channel filter=0.000000e+000 result=40 16:18:49 Config A/D Result=40 16:18:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:49 Get A/D filter: -9.255963e+061 result=40 16:18:49 Get A/D value=-858993460 result=40 16:18:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:49 Parameters OK 16:18:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:49 Set A/D data flow result=40 16:18:49 Set A/D channel type result=40 16:18:49 Set A/D encoding result=40 16:18:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:49 Set channel filter=0.000000e+000 result=40 16:18:49 Config A/D Result=40 16:18:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:49 Get A/D filter: -9.255963e+061 result=40 16:18:49 Get A/D value=-858993460 result=40 16:18:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:18:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:18:49 Aux= 16:18:49 Message to Camera, serial 226975 queued 16:19:25 Received message from Master: op=PointingHead serial=226987 16:19:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:19:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:19:26 Point started: ret=0 16:19:26 point_skyscan result=0 16:19:26 Check angles 16:19:26 SkyScan query 16:19:27 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.87<-13458 Statuses=0009 0009 16:19:27 Msec=0 True Az=153.075 Ze=-21.87 Az status=0009 Ze status=0009 16:19:27 Check angles 16:19:27 SkyScan query 16:19:28 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.855<-12057 Statuses=0009 0009 16:19:28 Msec=750 True Az=135.63 Ze=-0.855 Az status=0009 Ze status=0009 16:19:28 Check angles 16:19:28 SkyScan query 16:19:28 SkyScan query done: ret=0 az=118.08<-7872 ze=20.055<-10663 Statuses=0009 0009 16:19:28 Msec=1500 True Az=118.08 Ze=20.055 Az status=0009 Ze status=0009 16:19:29 Check angles 16:19:29 SkyScan query 16:19:29 SkyScan query done: ret=0 az=100.365<-6691 ze=41.49<-9234 Statuses=0009 0009 16:19:29 Msec=2250 True Az=100.365 Ze=41.49 Az status=0009 Ze status=0009 16:19:29 Check angles 16:19:29 SkyScan query 16:19:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 16:19:30 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 16:19:30 Check angles 16:19:30 SkyScan query 16:19:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:19:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:19:31 Message to Master queued w/err=0: serial=226987 error=0 16:19:36 Received message from Master: op=Filter serial=226988 16:19:36 Color wheel filter change from 0 to 0 16:19:36 FLIGetFilterPos err=0 currentPosition=0 16:19:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:19:36 Filter is already there-color wheel unchanged 16:19:36 Received message from Master: op=Shutter serial=226989 16:19:36 Shutter LASER close 16:19:36 Received message from Camera: op=State serial=226991 16:19:36 GetSingleValue result=40 Value=cccccccc 16:19:36 SkyScan query 16:19:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:19:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:36 Parameters OK 16:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:36 Set A/D data flow result=40 16:19:36 Set A/D channel type result=40 16:19:36 Set A/D encoding result=40 16:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:36 Set channel filter=0.000000e+000 result=40 16:19:36 Config A/D Result=40 16:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:36 Get A/D filter: -9.255963e+061 result=40 16:19:36 Get A/D value=-858993460 result=40 16:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:36 Parameters OK 16:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:36 Set A/D data flow result=40 16:19:36 Set A/D channel type result=40 16:19:36 Set A/D encoding result=40 16:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:36 Set channel filter=0.000000e+000 result=40 16:19:36 Config A/D Result=40 16:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:36 Get A/D filter: -9.255963e+061 result=40 16:19:36 Get A/D value=-858993460 result=40 16:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:19:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:19:36 Aux= 16:19:36 Message to Camera, serial 226991 queued 16:20:13 Received message from Master: op=PointingHead serial=227004 16:20:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:20:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:20:14 Point started: ret=0 16:20:14 point_skyscan result=0 16:20:14 Check angles 16:20:14 SkyScan query 16:20:15 SkyScan query done: ret=0 az=108.9<-7260 ze=38.475<-9435 Statuses=0009 0008 16:20:15 Msec=0 True Az=108.9 Ze=38.475 Az status=0009 Ze status=0008 16:20:15 Check angles 16:20:15 SkyScan query 16:20:16 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 16:20:16 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 16:20:16 Check angles 16:20:16 SkyScan query 16:20:16 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 16:20:16 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 16:20:17 Check angles 16:20:17 SkyScan query 16:20:17 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 16:20:17 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 16:20:17 Check angles 16:20:17 SkyScan query 16:20:18 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:20:18 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:20:18 Check angles 16:20:18 SkyScan query 16:20:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:20:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:20:19 Message to Master queued w/err=0: serial=227004 error=0 16:20:24 Received message from Master: op=Filter serial=227005 16:20:24 Color wheel filter change from 0 to 0 16:20:24 FLIGetFilterPos err=0 currentPosition=0 16:20:24 FLIGetStepsRemaining err=0 RemainingSteps=0 16:20:24 Filter is already there-color wheel unchanged 16:20:24 Received message from Master: op=Shutter serial=227006 16:20:24 Shutter LASER close 16:20:24 Received message from Camera: op=State serial=227008 16:20:24 GetSingleValue result=40 Value=cccccccc 16:20:24 SkyScan query 16:20:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:20:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:24 Parameters OK 16:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:24 Set A/D data flow result=40 16:20:24 Set A/D channel type result=40 16:20:24 Set A/D encoding result=40 16:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:24 Set channel filter=0.000000e+000 result=40 16:20:24 Config A/D Result=40 16:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:24 Get A/D filter: -9.255963e+061 result=40 16:20:24 Get A/D value=-858993460 result=40 16:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:24 Parameters OK 16:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:24 Set A/D data flow result=40 16:20:24 Set A/D channel type result=40 16:20:24 Set A/D encoding result=40 16:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:24 Set channel filter=0.000000e+000 result=40 16:20:24 Config A/D Result=40 16:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:24 Get A/D filter: -9.255963e+061 result=40 16:20:24 Get A/D value=-858993460 result=40 16:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:20:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:20:24 Aux= 16:20:24 Message to Camera, serial 227008 queued 16:21:01 Received message from Master: op=PointingHead serial=227021 16:21:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:21:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:21:02 Point started: ret=0 16:21:02 point_skyscan result=0 16:21:02 Check angles 16:21:02 SkyScan query 16:21:03 SkyScan query done: ret=0 az=152.91<-10194 ze=8.535<-11431 Statuses=0009 0009 16:21:03 Msec=0 True Az=152.91 Ze=8.535 Az status=0009 Ze status=0009 16:21:03 Check angles 16:21:03 SkyScan query 16:21:04 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.39<-12826 Statuses=0009 0009 16:21:04 Msec=750 True Az=135.42 Ze=-12.39 Az status=0009 Ze status=0009 16:21:04 Check angles 16:21:04 SkyScan query 16:21:05 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.375<-14225 Statuses=0009 0009 16:21:05 Msec=1500 True Az=117.825 Ze=-33.375 Az status=0009 Ze status=0009 16:21:05 Check angles 16:21:05 SkyScan query 16:21:05 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.555<-15437 Statuses=0009 0009 16:21:05 Msec=2250 True Az=100.485 Ze=-51.555 Az status=0009 Ze status=0009 16:21:05 Check angles 16:21:05 SkyScan query 16:21:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 16:21:06 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 16:21:06 Check angles 16:21:06 SkyScan query 16:21:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:21:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:21:07 Message to Master queued w/err=0: serial=227021 error=0 16:21:12 Received message from Master: op=Filter serial=227022 16:21:12 Color wheel filter change from 0 to 0 16:21:12 FLIGetFilterPos err=0 currentPosition=0 16:21:12 FLIGetStepsRemaining err=0 RemainingSteps=0 16:21:12 Filter is already there-color wheel unchanged 16:21:12 Received message from Master: op=Shutter serial=227023 16:21:12 Shutter LASER close 16:21:12 Received message from Camera: op=State serial=227025 16:21:12 GetSingleValue result=40 Value=cccccccc 16:21:12 SkyScan query 16:21:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:21:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:13 Parameters OK 16:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:13 Set A/D data flow result=40 16:21:13 Set A/D channel type result=40 16:21:13 Set A/D encoding result=40 16:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:13 Set channel filter=0.000000e+000 result=40 16:21:13 Config A/D Result=40 16:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:13 Get A/D filter: -9.255963e+061 result=40 16:21:13 Get A/D value=-858993460 result=40 16:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:13 Parameters OK 16:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:13 Set A/D data flow result=40 16:21:13 Set A/D channel type result=40 16:21:13 Set A/D encoding result=40 16:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:13 Set channel filter=0.000000e+000 result=40 16:21:13 Config A/D Result=40 16:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:13 Get A/D filter: -9.255963e+061 result=40 16:21:13 Get A/D value=-858993460 result=40 16:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:21:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:21:13 Aux= 16:21:13 Message to Camera, serial 227025 queued 16:21:49 Received message from Master: op=PointingHead serial=227038 16:21:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:21:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:21:50 Point started: ret=0 16:21:50 point_skyscan result=0 16:21:51 Check angles 16:21:51 SkyScan query 16:21:51 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.735<-17449 Statuses=0009 0009 16:21:51 Msec=0 True Az=109.35 Ze=-81.735 Az status=0009 Ze status=0009 16:21:51 Check angles 16:21:51 SkyScan query 16:21:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.08<-18872 Statuses=0008 0009 16:21:52 Msec=750 True Az=112.995 Ze=-103.08 Az status=0008 Ze status=0009 16:21:52 Check angles 16:21:52 SkyScan query 16:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 16:21:53 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 16:21:53 Check angles 16:21:53 SkyScan query 16:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.975<-21665 Statuses=0008 0009 16:21:53 Msec=2250 True Az=112.995 Ze=-144.975 Az status=0008 Ze status=0009 16:21:54 Check angles 16:21:54 SkyScan query 16:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.38<-23092 Statuses=0008 0009 16:21:54 Msec=3000 True Az=112.995 Ze=-166.38 Az status=0008 Ze status=0009 16:21:54 Check angles 16:21:54 SkyScan query 16:21:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:21:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:21:55 Message to Master queued w/err=0: serial=227038 error=0 16:22:00 Received message from Master: op=Filter serial=227039 16:22:00 Color wheel filter change from 0 to 0 16:22:00 FLIGetFilterPos err=0 currentPosition=0 16:22:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:22:00 Filter is already there-color wheel unchanged 16:22:00 Received message from Master: op=Shutter serial=227040 16:22:00 Shutter LASER open 16:22:00 Received message from Camera: op=State serial=227042 16:22:00 GetSingleValue result=40 Value=cccccccc 16:22:00 SkyScan query 16:22:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:22:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:01 Parameters OK 16:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:01 Set A/D data flow result=40 16:22:01 Set A/D channel type result=40 16:22:01 Set A/D encoding result=40 16:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:01 Set channel filter=0.000000e+000 result=40 16:22:01 Config A/D Result=40 16:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:01 Get A/D filter: -9.255963e+061 result=40 16:22:01 Get A/D value=-858993460 result=40 16:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:01 Parameters OK 16:22:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:01 Set A/D data flow result=40 16:22:01 Set A/D channel type result=40 16:22:01 Set A/D encoding result=40 16:22:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:01 Set channel filter=0.000000e+000 result=40 16:22:01 Config A/D Result=40 16:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:01 Get A/D filter: -9.255963e+061 result=40 16:22:01 Get A/D value=-858993460 result=40 16:22:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:01 Aux= 16:22:01 Message to Camera, serial 227042 queued 16:22:09 Received message from Master: op=Shutter serial=227052 16:22:09 Shutter LASER close 16:22:10 Received message from Master: op=PointingHead serial=227056 16:22:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:22:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:22:10 Point started: ret=0 16:22:10 point_skyscan result=0 16:22:11 Check angles 16:22:11 SkyScan query 16:22:11 SkyScan query done: ret=0 az=89.88<-5992 ze=157.275<-1515 Statuses=0009 0009 16:22:11 Msec=0 True Az=89.88 Ze=157.275 Az status=0009 Ze status=0009 16:22:12 Check angles 16:22:12 SkyScan query 16:22:12 SkyScan query done: ret=0 az=72.045<-4803 ze=135.915<-2939 Statuses=0009 0009 16:22:12 Msec=750 True Az=72.045 Ze=135.915 Az status=0009 Ze status=0009 16:22:12 Check angles 16:22:12 SkyScan query 16:22:13 SkyScan query done: ret=0 az=54.255<-3617 ze=114.45<-4370 Statuses=0009 0009 16:22:13 Msec=1500 True Az=54.255 Ze=114.45 Az status=0009 Ze status=0009 16:22:13 Check angles 16:22:13 SkyScan query 16:22:14 SkyScan query done: ret=0 az=41.01<-2734 ze=93.555<-5763 Statuses=0009 0009 16:22:14 Msec=2250 True Az=41.01 Ze=93.555 Az status=0009 Ze status=0009 16:22:14 Check angles 16:22:14 SkyScan query 16:22:14 SkyScan query done: ret=0 az=40.98<-2732 ze=72.57<-7162 Statuses=0008 0009 16:22:14 Msec=3000 True Az=40.98 Ze=72.57 Az status=0008 Ze status=0009 16:22:15 Check angles 16:22:15 SkyScan query 16:22:15 SkyScan query done: ret=0 az=40.98<-2732 ze=52.335<-8511 Statuses=0008 0009 16:22:15 Msec=3750 True Az=40.98 Ze=52.335 Az status=0008 Ze status=0009 16:22:15 Check angles 16:22:15 SkyScan query 16:22:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:22:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:22:16 Message to Master queued w/err=0: serial=227056 error=0 16:22:21 Received message from Master: op=Filter serial=227057 16:22:21 Color wheel filter change from 0 to 0 16:22:21 FLIGetFilterPos err=0 currentPosition=0 16:22:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:22:21 Filter is already there-color wheel unchanged 16:22:21 Received message from Master: op=Shutter serial=227058 16:22:21 Shutter LASER close 16:22:21 Received message from Camera: op=State serial=227060 16:22:21 GetSingleValue result=40 Value=cccccccc 16:22:21 SkyScan query 16:22:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:22:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:22 Parameters OK 16:22:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:22 Set A/D data flow result=40 16:22:22 Set A/D channel type result=40 16:22:22 Set A/D encoding result=40 16:22:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:22 Set channel filter=0.000000e+000 result=40 16:22:22 Config A/D Result=40 16:22:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:22 Get A/D filter: -9.255963e+061 result=40 16:22:22 Get A/D value=-858993460 result=40 16:22:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:22 Parameters OK 16:22:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:22 Set A/D data flow result=40 16:22:22 Set A/D channel type result=40 16:22:22 Set A/D encoding result=40 16:22:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:22 Set channel filter=0.000000e+000 result=40 16:22:22 Config A/D Result=40 16:22:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:22 Get A/D filter: -9.255963e+061 result=40 16:22:22 Get A/D value=-858993460 result=40 16:22:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:22 Aux= 16:22:22 Message to Camera, serial 227060 queued 16:22:59 Received message from Master: op=PointingHead serial=227073 16:22:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:22:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:22:59 Point started: ret=0 16:22:59 point_skyscan result=0 16:23:00 Check angles 16:23:00 SkyScan query 16:23:00 SkyScan query done: ret=0 az=64.41<-4294 ze=66.555<-7563 Statuses=0009 0008 16:23:00 Msec=0 True Az=64.41 Ze=66.555 Az status=0009 Ze status=0008 16:23:00 Check angles 16:23:00 SkyScan query 16:23:01 SkyScan query done: ret=0 az=82.29<-5486 ze=66.51<-7566 Statuses=0009 0008 16:23:01 Msec=750 True Az=82.29 Ze=66.51 Az status=0009 Ze status=0008 16:23:01 Check angles 16:23:01 SkyScan query 16:23:02 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 16:23:02 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 16:23:02 Check angles 16:23:02 SkyScan query 16:23:03 SkyScan query done: ret=0 az=117.285<-7819 ze=66.495<-7567 Statuses=0009 0008 16:23:03 Msec=2250 True Az=117.285 Ze=66.495 Az status=0009 Ze status=0008 16:23:03 Check angles 16:23:03 SkyScan query 16:23:03 SkyScan query done: ret=0 az=134.685<-8979 ze=66.495<-7567 Statuses=0009 0008 16:23:03 Msec=3000 True Az=134.685 Ze=66.495 Az status=0009 Ze status=0008 16:23:03 Check angles 16:23:03 SkyScan query 16:23:04 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 16:23:04 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 16:23:04 Check angles 16:23:04 SkyScan query 16:23:05 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:23:05 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:23:05 Message to Master queued w/err=0: serial=227073 error=0 16:23:10 Received message from Master: op=Filter serial=227074 16:23:10 Color wheel filter change from 0 to 0 16:23:10 FLIGetFilterPos err=0 currentPosition=0 16:23:10 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:10 Filter is already there-color wheel unchanged 16:23:10 Received message from Master: op=Shutter serial=227075 16:23:10 Shutter LASER close 16:23:10 Received message from Camera: op=State serial=227077 16:23:10 GetSingleValue result=40 Value=cccccccc 16:23:10 SkyScan query 16:23:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:23:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:11 Parameters OK 16:23:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:11 Set A/D data flow result=40 16:23:11 Set A/D channel type result=40 16:23:11 Set A/D encoding result=40 16:23:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:11 Set channel filter=0.000000e+000 result=40 16:23:11 Config A/D Result=40 16:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:11 Get A/D filter: -9.255963e+061 result=40 16:23:11 Get A/D value=-858993460 result=40 16:23:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:11 Parameters OK 16:23:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:11 Set A/D data flow result=40 16:23:11 Set A/D channel type result=40 16:23:11 Set A/D encoding result=40 16:23:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:11 Set channel filter=0.000000e+000 result=40 16:23:11 Config A/D Result=40 16:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:11 Get A/D filter: -9.255963e+061 result=40 16:23:11 Get A/D value=-858993460 result=40 16:23:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:11 Aux= 16:23:11 Message to Camera, serial 227077 queued 16:23:47 Received message from Master: op=PointingHead serial=227090 16:23:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:23:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:23:48 Point started: ret=0 16:23:48 point_skyscan result=0 16:23:49 Check angles 16:23:49 SkyScan query 16:23:49 SkyScan query done: ret=0 az=134.82<-8988 ze=36.675<-9555 Statuses=0009 0009 16:23:49 Msec=0 True Az=134.82 Ze=36.675 Az status=0009 Ze status=0009 16:23:49 Check angles 16:23:49 SkyScan query 16:23:50 SkyScan query done: ret=0 az=117.33<-7822 ze=15.75<-10950 Statuses=0009 0009 16:23:50 Msec=750 True Az=117.33 Ze=15.75 Az status=0009 Ze status=0009 16:23:50 Check angles 16:23:50 SkyScan query 16:23:51 SkyScan query done: ret=0 az=100.11<-6674 ze=-5.235<-12349 Statuses=0009 0009 16:23:51 Msec=1500 True Az=100.11 Ze=-5.235 Az status=0009 Ze status=0009 16:23:51 Check angles 16:23:51 SkyScan query 16:23:51 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.7<-13780 Statuses=0009 0009 16:23:51 Msec=2250 True Az=82.245 Ze=-26.7 Az status=0009 Ze status=0009 16:23:52 Check angles 16:23:52 SkyScan query 16:23:52 SkyScan query done: ret=0 az=64.665<-4311 ze=-38.58<-14572 Statuses=0009 0008 16:23:52 Msec=3000 True Az=64.665 Ze=-38.58 Az status=0009 Ze status=0008 16:23:52 Check angles 16:23:52 SkyScan query 16:23:53 SkyScan query done: ret=0 az=47.175<-3145 ze=-38.52<-14568 Statuses=0009 0008 16:23:53 Msec=3750 True Az=47.175 Ze=-38.52 Az status=0009 Ze status=0008 16:23:53 Check angles 16:23:53 SkyScan query 16:23:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:23:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:23:54 Message to Master queued w/err=0: serial=227090 error=0 16:23:59 Received message from Master: op=Filter serial=227091 16:23:59 Color wheel filter change from 0 to 0 16:23:59 FLIGetFilterPos err=0 currentPosition=0 16:23:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:59 Filter is already there-color wheel unchanged 16:23:59 Received message from Master: op=Shutter serial=227092 16:23:59 Shutter LASER close 16:23:59 Received message from Camera: op=State serial=227094 16:23:59 GetSingleValue result=40 Value=cccccccc 16:23:59 SkyScan query 16:23:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:23:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:59 Parameters OK 16:23:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:59 Set A/D data flow result=40 16:23:59 Set A/D channel type result=40 16:23:59 Set A/D encoding result=40 16:23:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:59 Set channel filter=0.000000e+000 result=40 16:23:59 Config A/D Result=40 16:23:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:59 Get A/D filter: -9.255963e+061 result=40 16:23:59 Get A/D value=-858993460 result=40 16:23:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:59 Parameters OK 16:23:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:59 Set A/D data flow result=40 16:23:59 Set A/D channel type result=40 16:23:59 Set A/D encoding result=40 16:23:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:59 Set channel filter=0.000000e+000 result=40 16:23:59 Config A/D Result=40 16:23:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:59 Get A/D filter: -9.255963e+061 result=40 16:23:59 Get A/D value=-858993460 result=40 16:23:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:59 Aux= 16:23:59 Message to Camera, serial 227094 queued 16:24:35 Received message from Master: op=PointingHead serial=227106 16:24:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:24:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:24:36 Point started: ret=0 16:24:36 point_skyscan result=0 16:24:36 Check angles 16:24:36 SkyScan query 16:24:37 SkyScan query done: ret=0 az=64.455<-4297 ze=-68.865<-16591 Statuses=0009 0009 16:24:37 Msec=0 True Az=64.455 Ze=-68.865 Az status=0009 Ze status=0009 16:24:37 Check angles 16:24:37 SkyScan query 16:24:38 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.82<-17988 Statuses=0009 0009 16:24:38 Msec=750 True Az=81.9 Ze=-89.82 Az status=0009 Ze status=0009 16:24:38 Check angles 16:24:38 SkyScan query 16:24:39 SkyScan query done: ret=0 az=99.42<-6628 ze=-110.82<-19388 Statuses=0009 0009 16:24:39 Msec=1500 True Az=99.42 Ze=-110.82 Az status=0009 Ze status=0009 16:24:39 Check angles 16:24:39 SkyScan query 16:24:39 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.7<-20780 Statuses=0009 0009 16:24:39 Msec=2250 True Az=116.865 Ze=-131.7 Az status=0009 Ze status=0009 16:24:39 Check angles 16:24:39 SkyScan query 16:24:40 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.54<-21436 Statuses=0009 0008 16:24:40 Msec=3000 True Az=131.04 Ze=-141.54 Az status=0009 Ze status=0008 16:24:40 Check angles 16:24:40 SkyScan query 16:24:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:24:41 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:24:41 Message to Master queued w/err=0: serial=227106 error=0 16:24:46 Received message from Master: op=Filter serial=227107 16:24:46 Color wheel filter change from 0 to 0 16:24:46 FLIGetFilterPos err=0 currentPosition=0 16:24:46 FLIGetStepsRemaining err=0 RemainingSteps=0 16:24:46 Filter is already there-color wheel unchanged 16:24:46 Received message from Master: op=Shutter serial=227108 16:24:46 Shutter LASER close 16:24:46 Received message from Camera: op=State serial=227110 16:24:46 GetSingleValue result=40 Value=cccccccc 16:24:46 SkyScan query 16:24:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:24:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:47 Parameters OK 16:24:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:47 Set A/D data flow result=40 16:24:47 Set A/D channel type result=40 16:24:47 Set A/D encoding result=40 16:24:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:47 Set channel filter=0.000000e+000 result=40 16:24:47 Config A/D Result=40 16:24:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:47 Get A/D filter: -9.255963e+061 result=40 16:24:47 Get A/D value=-858993460 result=40 16:24:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:47 Parameters OK 16:24:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:47 Set A/D data flow result=40 16:24:47 Set A/D channel type result=40 16:24:47 Set A/D encoding result=40 16:24:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:47 Set channel filter=0.000000e+000 result=40 16:24:47 Config A/D Result=40 16:24:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:47 Get A/D filter: -9.255963e+061 result=40 16:24:47 Get A/D value=-858993460 result=40 16:24:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:24:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:24:47 Aux= 16:24:47 Message to Camera, serial 227110 queued 16:25:23 Received message from Master: op=PointingHead serial=227123 16:25:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:25:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:25:24 Point started: ret=0 16:25:24 point_skyscan result=0 16:25:25 Check angles 16:25:25 SkyScan query 16:25:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 16:25:25 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 16:25:25 Check angles 16:25:25 SkyScan query 16:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:25:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:25:26 Message to Master queued w/err=0: serial=227123 error=0 16:25:31 Received message from Master: op=Filter serial=227124 16:25:31 Color wheel filter change from 0 to 0 16:25:31 FLIGetFilterPos err=0 currentPosition=0 16:25:31 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:31 Filter is already there-color wheel unchanged 16:25:31 Received message from Master: op=Shutter serial=227125 16:25:31 Shutter LASER open 16:25:31 Received message from Camera: op=State serial=227127 16:25:31 GetSingleValue result=40 Value=cccccccc 16:25:31 SkyScan query 16:25:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:25:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:32 Parameters OK 16:25:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:32 Set A/D data flow result=40 16:25:32 Set A/D channel type result=40 16:25:32 Set A/D encoding result=40 16:25:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:32 Set channel filter=0.000000e+000 result=40 16:25:32 Config A/D Result=40 16:25:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:32 Get A/D filter: -9.255963e+061 result=40 16:25:32 Get A/D value=-858993460 result=40 16:25:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:32 Parameters OK 16:25:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:32 Set A/D data flow result=40 16:25:32 Set A/D channel type result=40 16:25:32 Set A/D encoding result=40 16:25:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:32 Set channel filter=0.000000e+000 result=40 16:25:32 Config A/D Result=40 16:25:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:32 Get A/D filter: -9.255963e+061 result=40 16:25:32 Get A/D value=-858993460 result=40 16:25:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:32 Aux= 16:25:32 Message to Camera, serial 227127 queued 16:25:40 Received message from Master: op=Shutter serial=227137 16:25:40 Shutter LASER close 16:25:41 Received message from Master: op=PointingHead serial=227141 16:25:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:25:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:25:41 Point started: ret=0 16:25:41 point_skyscan result=0 16:25:42 Check angles 16:25:42 SkyScan query 16:25:42 SkyScan query done: ret=0 az=136.305<-9087 ze=-142.935<-21529 Statuses=0009 0009 16:25:42 Msec=0 True Az=136.305 Ze=-142.935 Az status=0009 Ze status=0009 16:25:43 Check angles 16:25:43 SkyScan query [UTC 2018-12-17 16:25:43] 16:25:43 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.935<-20129 Statuses=0009 0009 16:25:43 Msec=750 True Az=153.78 Ze=-121.935 Az status=0009 Ze status=0009 16:25:43 Check angles 16:25:43 SkyScan query 16:25:44 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.95<-18730 Statuses=0009 0009 16:25:44 Msec=1500 True Az=171.375 Ze=-100.95 Az status=0009 Ze status=0009 16:25:44 Check angles 16:25:44 SkyScan query 16:25:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.07<-17338 Statuses=0008 0009 16:25:45 Msec=2250 True Az=175.995 Ze=-80.07 Az status=0008 Ze status=0009 16:25:45 Check angles 16:25:45 SkyScan query 16:25:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.1<-15940 Statuses=0008 0009 16:25:45 Msec=3000 True Az=175.995 Ze=-59.1 Az status=0008 Ze status=0009 16:25:46 Check angles 16:25:46 SkyScan query 16:25:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:25:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:25:46 Message to Master queued w/err=0: serial=227141 error=0 16:25:51 Received message from Master: op=Filter serial=227142 16:25:51 Color wheel filter change from 0 to 0 16:25:51 FLIGetFilterPos err=0 currentPosition=0 16:25:51 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:51 Filter is already there-color wheel unchanged 16:25:51 Received message from Master: op=Shutter serial=227143 16:25:51 Shutter LASER close 16:25:52 Received message from Camera: op=State serial=227145 16:25:52 GetSingleValue result=40 Value=cccccccc 16:25:52 SkyScan query 16:25:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:25:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:52 Parameters OK 16:25:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:52 Set A/D data flow result=40 16:25:52 Set A/D channel type result=40 16:25:52 Set A/D encoding result=40 16:25:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:52 Set channel filter=0.000000e+000 result=40 16:25:52 Config A/D Result=40 16:25:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:52 Get A/D filter: -9.255963e+061 result=40 16:25:52 Get A/D value=-858993460 result=40 16:25:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:52 Parameters OK 16:25:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:52 Set A/D data flow result=40 16:25:52 Set A/D channel type result=40 16:25:52 Set A/D encoding result=40 16:25:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:52 Set channel filter=0.000000e+000 result=40 16:25:52 Config A/D Result=40 16:25:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:52 Get A/D filter: -9.255963e+061 result=40 16:25:52 Get A/D value=-858993460 result=40 16:25:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:52 Aux= 16:25:52 Message to Camera, serial 227145 queued 16:26:29 Received message from Master: op=PointingHead serial=227158 16:26:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:26:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:26:29 Point started: ret=0 16:26:29 point_skyscan result=0 16:26:30 Check angles 16:26:30 SkyScan query 16:26:31 SkyScan query done: ret=0 az=153.135<-10209 ze=-21.945<-13463 Statuses=0009 0009 16:26:31 Msec=0 True Az=153.135 Ze=-21.945 Az status=0009 Ze status=0009 16:26:31 Check angles 16:26:31 SkyScan query 16:26:31 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.495<-12033 Statuses=0009 0009 16:26:31 Msec=750 True Az=135.3 Ze=-0.495 Az status=0009 Ze status=0009 16:26:32 Check angles 16:26:32 SkyScan query 16:26:32 SkyScan query done: ret=0 az=117.48<-7832 ze=20.925<-10605 Statuses=0009 0009 16:26:32 Msec=1500 True Az=117.48 Ze=20.925 Az status=0009 Ze status=0009 16:26:32 Check angles 16:26:32 SkyScan query 16:26:33 SkyScan query done: ret=0 az=100.035<-6669 ze=41.835<-9211 Statuses=0009 0009 16:26:33 Msec=2250 True Az=100.035 Ze=41.835 Az status=0009 Ze status=0009 16:26:33 Check angles 16:26:33 SkyScan query 16:26:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 16:26:34 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 16:26:34 Check angles 16:26:34 SkyScan query 16:26:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:26:34 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:26:34 Message to Master queued w/err=0: serial=227158 error=0 16:26:39 Received message from Master: op=Filter serial=227159 16:26:39 Color wheel filter change from 0 to 0 16:26:39 FLIGetFilterPos err=0 currentPosition=0 16:26:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:26:39 Filter is already there-color wheel unchanged 16:26:40 Received message from Master: op=Shutter serial=227160 16:26:40 Shutter LASER close 16:26:40 Received message from Camera: op=State serial=227162 16:26:40 GetSingleValue result=40 Value=cccccccc 16:26:40 SkyScan query 16:26:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:26:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:40 Parameters OK 16:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:40 Set A/D data flow result=40 16:26:40 Set A/D channel type result=40 16:26:40 Set A/D encoding result=40 16:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:40 Set channel filter=0.000000e+000 result=40 16:26:40 Config A/D Result=40 16:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:40 Get A/D filter: -9.255963e+061 result=40 16:26:40 Get A/D value=-858993460 result=40 16:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:40 Parameters OK 16:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:40 Set A/D data flow result=40 16:26:40 Set A/D channel type result=40 16:26:40 Set A/D encoding result=40 16:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:40 Set channel filter=0.000000e+000 result=40 16:26:40 Config A/D Result=40 16:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:40 Get A/D filter: -9.255963e+061 result=40 16:26:40 Get A/D value=-858993460 result=40 16:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:26:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:26:40 Aux= 16:26:40 Message to Camera, serial 227162 queued 16:27:17 Received message from Master: op=PointingHead serial=227175 16:27:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:27:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:27:17 Point started: ret=0 16:27:17 point_skyscan result=0 16:27:18 Check angles 16:27:18 SkyScan query 16:27:19 SkyScan query done: ret=0 az=108.975<-7265 ze=38.475<-9435 Statuses=0009 0008 16:27:19 Msec=0 True Az=108.975 Ze=38.475 Az status=0009 Ze status=0008 16:27:19 Check angles 16:27:19 SkyScan query 16:27:20 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 16:27:20 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 16:27:20 Check angles 16:27:20 SkyScan query 16:27:20 SkyScan query done: ret=0 az=144.63<-9642 ze=38.505<-9433 Statuses=0009 0008 16:27:20 Msec=1500 True Az=144.63 Ze=38.505 Az status=0009 Ze status=0008 16:27:21 Check angles 16:27:21 SkyScan query 16:27:21 SkyScan query done: ret=0 az=162.045<-10803 ze=38.505<-9433 Statuses=0009 0008 16:27:21 Msec=2250 True Az=162.045 Ze=38.505 Az status=0009 Ze status=0008 16:27:21 Check angles 16:27:21 SkyScan query 16:27:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:27:22 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:27:22 Check angles 16:27:22 SkyScan query 16:27:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:27:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:27:23 Message to Master queued w/err=0: serial=227175 error=0 16:27:28 Received message from Master: op=Filter serial=227176 16:27:28 Color wheel filter change from 0 to 0 16:27:28 FLIGetFilterPos err=0 currentPosition=0 16:27:28 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:28 Filter is already there-color wheel unchanged 16:27:28 Received message from Master: op=Shutter serial=227177 16:27:28 Shutter LASER close 16:27:28 Received message from Camera: op=State serial=227179 16:27:28 GetSingleValue result=40 Value=cccccccc 16:27:28 SkyScan query 16:27:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:27:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:28 Parameters OK 16:27:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:28 Set A/D data flow result=40 16:27:28 Set A/D channel type result=40 16:27:28 Set A/D encoding result=40 16:27:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:28 Set channel filter=0.000000e+000 result=40 16:27:28 Config A/D Result=40 16:27:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:28 Get A/D filter: -9.255963e+061 result=40 16:27:28 Get A/D value=-858993460 result=40 16:27:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:28 Parameters OK 16:27:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:28 Set A/D data flow result=40 16:27:28 Set A/D channel type result=40 16:27:28 Set A/D encoding result=40 16:27:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:28 Set channel filter=0.000000e+000 result=40 16:27:28 Config A/D Result=40 16:27:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:28 Get A/D filter: -9.255963e+061 result=40 16:27:28 Get A/D value=-858993460 result=40 16:27:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:28 Aux= 16:27:28 Message to Camera, serial 227179 queued 16:28:05 Received message from Master: op=PointingHead serial=227192 16:28:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:28:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:28:06 Point started: ret=0 16:28:06 point_skyscan result=0 16:28:06 Check angles 16:28:06 SkyScan query 16:28:07 SkyScan query done: ret=0 az=153.21<-10214 ze=9<-11400 Statuses=0009 0009 16:28:07 Msec=0 True Az=153.21 Ze=9 Az status=0009 Ze status=0009 16:28:07 Check angles 16:28:07 SkyScan query 16:28:08 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.015<-12801 Statuses=0009 0009 16:28:08 Msec=750 True Az=135.765 Ze=-12.015 Az status=0009 Ze status=0009 16:28:08 Check angles 16:28:08 SkyScan query 16:28:08 SkyScan query done: ret=0 az=118.215<-7881 ze=-32.925<-14195 Statuses=0009 0009 16:28:08 Msec=1500 True Az=118.215 Ze=-32.925 Az status=0009 Ze status=0009 16:28:09 Check angles 16:28:09 SkyScan query 16:28:09 SkyScan query done: ret=0 az=100.86<-6724 ze=-51.51<-15434 Statuses=0009 0009 16:28:09 Msec=2250 True Az=100.86 Ze=-51.51 Az status=0009 Ze status=0009 16:28:09 Check angles 16:28:09 SkyScan query 16:28:10 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 16:28:10 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 16:28:10 Check angles 16:28:10 SkyScan query 16:28:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:28:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:28:11 Message to Master queued w/err=0: serial=227192 error=0 16:28:16 Received message from Master: op=Filter serial=227193 16:28:16 Color wheel filter change from 0 to 0 16:28:16 FLIGetFilterPos err=0 currentPosition=0 16:28:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:28:16 Filter is already there-color wheel unchanged 16:28:16 Received message from Master: op=Shutter serial=227194 16:28:16 Shutter LASER close 16:28:16 Received message from Camera: op=State serial=227196 16:28:16 GetSingleValue result=40 Value=cccccccc 16:28:16 SkyScan query 16:28:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:28:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:16 Parameters OK 16:28:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:16 Set A/D data flow result=40 16:28:16 Set A/D channel type result=40 16:28:16 Set A/D encoding result=40 16:28:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:16 Set channel filter=0.000000e+000 result=40 16:28:16 Config A/D Result=40 16:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:16 Get A/D filter: -9.255963e+061 result=40 16:28:16 Get A/D value=-858993460 result=40 16:28:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:16 Parameters OK 16:28:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:16 Set A/D data flow result=40 16:28:16 Set A/D channel type result=40 16:28:16 Set A/D encoding result=40 16:28:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:16 Set channel filter=0.000000e+000 result=40 16:28:16 Config A/D Result=40 16:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:16 Get A/D filter: -9.255963e+061 result=40 16:28:16 Get A/D value=-858993460 result=40 16:28:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:28:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:28:16 Aux= 16:28:16 Message to Camera, serial 227196 queued 16:28:53 Received message from Master: op=PointingHead serial=227209 16:28:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:28:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:28:54 Point started: ret=0 16:28:54 point_skyscan result=0 16:28:54 Check angles 16:28:54 SkyScan query 16:28:55 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.765<-17451 Statuses=0009 0009 16:28:55 Msec=0 True Az=109.365 Ze=-81.765 Az status=0009 Ze status=0009 16:28:55 Check angles 16:28:55 SkyScan query 16:28:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.125<-18875 Statuses=0008 0009 16:28:56 Msec=750 True Az=112.995 Ze=-103.125 Az status=0008 Ze status=0009 16:28:56 Check angles 16:28:56 SkyScan query 16:28:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.08<-20272 Statuses=0008 0009 16:28:56 Msec=1500 True Az=112.995 Ze=-124.08 Az status=0008 Ze status=0009 16:28:57 Check angles 16:28:57 SkyScan query 16:28:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 16:28:57 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 16:28:57 Check angles 16:28:57 SkyScan query 16:28:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.96<-23064 Statuses=0008 0009 16:28:58 Msec=3000 True Az=112.995 Ze=-165.96 Az status=0008 Ze status=0009 16:28:58 Check angles 16:28:58 SkyScan query 16:28:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:28:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:28:59 Message to Master queued w/err=0: serial=227209 error=0 16:29:04 Received message from Master: op=Filter serial=227210 16:29:04 Color wheel filter change from 0 to 0 16:29:04 FLIGetFilterPos err=0 currentPosition=0 16:29:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:04 Filter is already there-color wheel unchanged 16:29:04 Received message from Master: op=Shutter serial=227211 16:29:04 Shutter LASER open 16:29:04 Received message from Camera: op=State serial=227213 16:29:04 GetSingleValue result=40 Value=cccccccc 16:29:04 SkyScan query 16:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:29:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:05 Parameters OK 16:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:05 Set A/D data flow result=40 16:29:05 Set A/D channel type result=40 16:29:05 Set A/D encoding result=40 16:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:05 Set channel filter=0.000000e+000 result=40 16:29:05 Config A/D Result=40 16:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:05 Get A/D filter: -9.255963e+061 result=40 16:29:05 Get A/D value=-858993460 result=40 16:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:05 Parameters OK 16:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:05 Set A/D data flow result=40 16:29:05 Set A/D channel type result=40 16:29:05 Set A/D encoding result=40 16:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:05 Set channel filter=0.000000e+000 result=40 16:29:05 Config A/D Result=40 16:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:05 Get A/D filter: -9.255963e+061 result=40 16:29:05 Get A/D value=-858993460 result=40 16:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:05 Aux= 16:29:05 Message to Camera, serial 227213 queued 16:29:13 Received message from Master: op=Shutter serial=227223 16:29:13 Shutter LASER close 16:29:14 Received message from Master: op=PointingHead serial=227227 16:29:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:29:14 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:29:14 Point started: ret=0 16:29:14 point_skyscan result=0 16:29:15 Check angles 16:29:15 SkyScan query 16:29:15 SkyScan query done: ret=0 az=90.03<-6002 ze=157.35<-1510 Statuses=0009 0009 16:29:15 Msec=0 True Az=90.03 Ze=157.35 Az status=0009 Ze status=0009 16:29:15 Check angles 16:29:15 SkyScan query 16:29:16 SkyScan query done: ret=0 az=72.585<-4839 ze=136.395<-2907 Statuses=0009 0009 16:29:16 Msec=750 True Az=72.585 Ze=136.395 Az status=0009 Ze status=0009 16:29:16 Check angles 16:29:16 SkyScan query 16:29:17 SkyScan query done: ret=0 az=54.75<-3650 ze=114.99<-4334 Statuses=0009 0009 16:29:17 Msec=1500 True Az=54.75 Ze=114.99 Az status=0009 Ze status=0009 16:29:17 Check angles 16:29:17 SkyScan query 16:29:17 SkyScan query done: ret=0 az=41.01<-2734 ze=94.02<-5732 Statuses=0009 0009 16:29:17 Msec=2250 True Az=41.01 Ze=94.02 Az status=0009 Ze status=0009 16:29:18 Check angles 16:29:18 SkyScan query 16:29:18 SkyScan query done: ret=0 az=40.995<-2733 ze=73.05<-7130 Statuses=0008 0009 16:29:18 Msec=3000 True Az=40.995 Ze=73.05 Az status=0008 Ze status=0009 16:29:18 Check angles 16:29:18 SkyScan query 16:29:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 16:29:19 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 16:29:19 Check angles 16:29:19 SkyScan query 16:29:20 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 16:29:20 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 16:29:20 Message to Master queued w/err=0: serial=227227 error=0 16:29:25 Received message from Master: op=Filter serial=227228 16:29:25 Color wheel filter change from 0 to 0 16:29:25 FLIGetFilterPos err=0 currentPosition=0 16:29:25 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:25 Filter is already there-color wheel unchanged 16:29:25 Received message from Master: op=Shutter serial=227229 16:29:25 Shutter LASER close 16:29:25 Received message from Camera: op=State serial=227231 16:29:25 GetSingleValue result=40 Value=cccccccc 16:29:25 SkyScan query 16:29:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:29:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:26 Parameters OK 16:29:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:26 Set A/D data flow result=40 16:29:26 Set A/D channel type result=40 16:29:26 Set A/D encoding result=40 16:29:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:26 Set channel filter=0.000000e+000 result=40 16:29:26 Config A/D Result=40 16:29:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:26 Get A/D filter: -9.255963e+061 result=40 16:29:26 Get A/D value=-858993460 result=40 16:29:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:26 Parameters OK 16:29:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:26 Set A/D data flow result=40 16:29:26 Set A/D channel type result=40 16:29:26 Set A/D encoding result=40 16:29:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:26 Set channel filter=0.000000e+000 result=40 16:29:26 Config A/D Result=40 16:29:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:26 Get A/D filter: -9.255963e+061 result=40 16:29:26 Get A/D value=-858993460 result=40 16:29:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:26 Aux= 16:29:26 Message to Camera, serial 227231 queued 16:30:02 Received message from Master: op=PointingHead serial=227244 16:30:02 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:30:02 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:30:03 Point started: ret=0 16:30:03 point_skyscan result=0 16:30:04 Check angles 16:30:04 SkyScan query 16:30:04 SkyScan query done: ret=0 az=64.185<-4279 ze=66.54<-7564 Statuses=0009 0008 16:30:04 Msec=0 True Az=64.185 Ze=66.54 Az status=0009 Ze status=0008 16:30:04 Check angles 16:30:04 SkyScan query 16:30:05 SkyScan query done: ret=0 az=81.705<-5447 ze=66.495<-7567 Statuses=0009 0008 16:30:05 Msec=750 True Az=81.705 Ze=66.495 Az status=0009 Ze status=0008 16:30:05 Check angles 16:30:05 SkyScan query 16:30:06 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 16:30:06 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 16:30:06 Check angles 16:30:06 SkyScan query 16:30:06 SkyScan query done: ret=0 az=116.535<-7769 ze=66.495<-7567 Statuses=0009 0008 16:30:06 Msec=2250 True Az=116.535 Ze=66.495 Az status=0009 Ze status=0008 16:30:07 Check angles 16:30:07 SkyScan query 16:30:07 SkyScan query done: ret=0 az=134.04<-8936 ze=66.495<-7567 Statuses=0009 0008 16:30:07 Msec=3000 True Az=134.04 Ze=66.495 Az status=0009 Ze status=0008 16:30:07 Check angles 16:30:07 SkyScan query 16:30:08 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 16:30:08 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 16:30:08 Check angles 16:30:08 SkyScan query 16:30:09 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:30:09 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:30:09 Message to Master queued w/err=0: serial=227244 error=0 16:30:14 Received message from Master: op=Filter serial=227245 16:30:14 Color wheel filter change from 0 to 0 16:30:14 FLIGetFilterPos err=0 currentPosition=0 16:30:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:30:14 Filter is already there-color wheel unchanged 16:30:14 Received message from Master: op=Shutter serial=227246 16:30:14 Shutter LASER close 16:30:14 Received message from Camera: op=State serial=227248 16:30:14 GetSingleValue result=40 Value=cccccccc 16:30:14 SkyScan query 16:30:14 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:30:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:14 Parameters OK 16:30:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:14 Set A/D data flow result=40 16:30:14 Set A/D channel type result=40 16:30:14 Set A/D encoding result=40 16:30:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:14 Set channel filter=0.000000e+000 result=40 16:30:14 Config A/D Result=40 16:30:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:14 Get A/D filter: -9.255963e+061 result=40 16:30:14 Get A/D value=-858993460 result=40 16:30:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:14 Parameters OK 16:30:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:14 Set A/D data flow result=40 16:30:14 Set A/D channel type result=40 16:30:14 Set A/D encoding result=40 16:30:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:14 Set channel filter=0.000000e+000 result=40 16:30:14 Config A/D Result=40 16:30:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:14 Get A/D filter: -9.255963e+061 result=40 16:30:14 Get A/D value=-858993460 result=40 16:30:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:14 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:30:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:30:14 Aux= 16:30:14 Message to Camera, serial 227248 queued 16:30:51 Received message from Master: op=PointingHead serial=227261 16:30:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:30:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:30:52 Point started: ret=0 16:30:52 point_skyscan result=0 16:30:52 Check angles 16:30:52 SkyScan query 16:30:53 SkyScan query done: ret=0 az=134.565<-8971 ze=36.285<-9581 Statuses=0009 0009 16:30:53 Msec=0 True Az=134.565 Ze=36.285 Az status=0009 Ze status=0009 16:30:53 Check angles 16:30:53 SkyScan query 16:30:54 SkyScan query done: ret=0 az=117.075<-7805 ze=15.375<-10975 Statuses=0009 0009 16:30:54 Msec=750 True Az=117.075 Ze=15.375 Az status=0009 Ze status=0009 16:30:54 Check angles 16:30:54 SkyScan query 16:30:54 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.64<-12376 Statuses=0009 0009 16:30:54 Msec=1500 True Az=99.795 Ze=-5.64 Az status=0009 Ze status=0009 16:30:55 Check angles 16:30:55 SkyScan query 16:30:55 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.105<-13807 Statuses=0009 0009 16:30:55 Msec=2250 True Az=81.81 Ze=-27.105 Az status=0009 Ze status=0009 16:30:55 Check angles 16:30:55 SkyScan query 16:30:56 SkyScan query done: ret=0 az=64.005<-4267 ze=-38.58<-14572 Statuses=0009 0008 16:30:56 Msec=3000 True Az=64.005 Ze=-38.58 Az status=0009 Ze status=0008 16:30:56 Check angles 16:30:56 SkyScan query 16:30:57 SkyScan query done: ret=0 az=46.56<-3104 ze=-38.52<-14568 Statuses=0009 0008 16:30:57 Msec=3750 True Az=46.56 Ze=-38.52 Az status=0009 Ze status=0008 16:30:57 Check angles 16:30:57 SkyScan query 16:30:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:30:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:30:57 Message to Master queued w/err=0: serial=227261 error=0 16:31:02 Received message from Master: op=Filter serial=227262 16:31:02 Color wheel filter change from 0 to 0 16:31:02 FLIGetFilterPos err=0 currentPosition=0 16:31:02 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:02 Filter is already there-color wheel unchanged 16:31:03 Received message from Master: op=Shutter serial=227263 16:31:03 Shutter LASER close 16:31:03 Received message from Camera: op=State serial=227265 16:31:03 GetSingleValue result=40 Value=cccccccc 16:31:03 SkyScan query 16:31:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:31:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:03 Parameters OK 16:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:03 Set A/D data flow result=40 16:31:03 Set A/D channel type result=40 16:31:03 Set A/D encoding result=40 16:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:03 Set channel filter=0.000000e+000 result=40 16:31:03 Config A/D Result=40 16:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:03 Get A/D filter: -9.255963e+061 result=40 16:31:03 Get A/D value=-858993460 result=40 16:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:03 Parameters OK 16:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:03 Set A/D data flow result=40 16:31:03 Set A/D channel type result=40 16:31:03 Set A/D encoding result=40 16:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:03 Set channel filter=0.000000e+000 result=40 16:31:03 Config A/D Result=40 16:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:03 Get A/D filter: -9.255963e+061 result=40 16:31:03 Get A/D value=-858993460 result=40 16:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:03 Aux= 16:31:03 Message to Camera, serial 227265 queued 16:31:40 Received message from Master: op=PointingHead serial=227278 16:31:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:31:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:31:40 Point started: ret=0 16:31:40 point_skyscan result=0 16:31:41 Check angles 16:31:41 SkyScan query 16:31:42 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.4<-16560 Statuses=0009 0009 16:31:42 Msec=0 True Az=64.02 Ze=-68.4 Az status=0009 Ze status=0009 16:31:42 Check angles 16:31:42 SkyScan query 16:31:43 SkyScan query done: ret=0 az=81.45<-5430 ze=-89.37<-17958 Statuses=0009 0009 16:31:43 Msec=750 True Az=81.45 Ze=-89.37 Az status=0009 Ze status=0009 16:31:43 Check angles 16:31:43 SkyScan query 16:31:43 SkyScan query done: ret=0 az=98.97<-6598 ze=-110.31<-19354 Statuses=0009 0009 16:31:43 Msec=1500 True Az=98.97 Ze=-110.31 Az status=0009 Ze status=0009 16:31:43 Check angles 16:31:43 SkyScan query 16:31:44 SkyScan query done: ret=0 az=116.415<-7761 ze=-131.235<-20749 Statuses=0009 0009 16:31:44 Msec=2250 True Az=116.415 Ze=-131.235 Az status=0009 Ze status=0009 16:31:44 Check angles 16:31:44 SkyScan query 16:31:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 16:31:45 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 16:31:45 Check angles 16:31:45 SkyScan query 16:31:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 16:31:46 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 16:31:46 Message to Master queued w/err=0: serial=227278 error=0 16:31:51 Received message from Master: op=Filter serial=227279 16:31:51 Color wheel filter change from 0 to 0 16:31:51 FLIGetFilterPos err=0 currentPosition=0 16:31:51 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:51 Filter is already there-color wheel unchanged 16:31:51 Received message from Master: op=Shutter serial=227280 16:31:51 Shutter LASER close 16:31:51 Received message from Camera: op=State serial=227282 16:31:51 GetSingleValue result=40 Value=cccccccc 16:31:51 SkyScan query 16:31:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:31:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:51 Parameters OK 16:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:51 Set A/D data flow result=40 16:31:51 Set A/D channel type result=40 16:31:51 Set A/D encoding result=40 16:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:51 Set channel filter=0.000000e+000 result=40 16:31:51 Config A/D Result=40 16:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:51 Get A/D filter: -9.255963e+061 result=40 16:31:51 Get A/D value=-858993460 result=40 16:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:51 Parameters OK 16:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:51 Set A/D data flow result=40 16:31:51 Set A/D channel type result=40 16:31:51 Set A/D encoding result=40 16:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:51 Set channel filter=0.000000e+000 result=40 16:31:51 Config A/D Result=40 16:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:51 Get A/D filter: -9.255963e+061 result=40 16:31:51 Get A/D value=-858993460 result=40 16:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:51 Aux= 16:31:51 Message to Camera, serial 227282 queued 16:32:28 Received message from Master: op=PointingHead serial=227295 16:32:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:32:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:32:29 Point started: ret=0 16:32:29 point_skyscan result=0 16:32:29 Check angles 16:32:29 SkyScan query 16:32:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 16:32:30 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 16:32:30 Check angles 16:32:30 SkyScan query 16:32:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:32:31 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:32:31 Message to Master queued w/err=0: serial=227295 error=0 16:32:36 Received message from Master: op=Filter serial=227296 16:32:36 Color wheel filter change from 0 to 0 16:32:36 FLIGetFilterPos err=0 currentPosition=0 16:32:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:36 Filter is already there-color wheel unchanged 16:32:36 Received message from Master: op=Shutter serial=227297 16:32:36 Shutter LASER open 16:32:36 Received message from Camera: op=State serial=227299 16:32:36 GetSingleValue result=40 Value=cccccccc 16:32:36 SkyScan query 16:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:32:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:37 Parameters OK 16:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:37 Set A/D data flow result=40 16:32:37 Set A/D channel type result=40 16:32:37 Set A/D encoding result=40 16:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:37 Set channel filter=0.000000e+000 result=40 16:32:37 Config A/D Result=40 16:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:37 Get A/D filter: -9.255963e+061 result=40 16:32:37 Get A/D value=-858993460 result=40 16:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:37 Parameters OK 16:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:37 Set A/D data flow result=40 16:32:37 Set A/D channel type result=40 16:32:37 Set A/D encoding result=40 16:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:37 Set channel filter=0.000000e+000 result=40 16:32:37 Config A/D Result=40 16:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:37 Get A/D filter: -9.255963e+061 result=40 16:32:37 Get A/D value=-858993460 result=40 16:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:37 Aux= 16:32:37 Message to Camera, serial 227299 queued 16:32:45 Received message from Master: op=Shutter serial=227309 16:32:45 Shutter LASER close 16:32:46 Received message from Master: op=PointingHead serial=227313 16:32:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:32:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:32:46 Point started: ret=0 16:32:46 point_skyscan result=0 16:32:47 Check angles 16:32:47 SkyScan query 16:32:47 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.49<-21566 Statuses=0009 0009 16:32:47 Msec=0 True Az=135.735 Ze=-143.49 Az status=0009 Ze status=0009 16:32:47 Check angles 16:32:47 SkyScan query 16:32:48 SkyScan query done: ret=0 az=153.255<-10217 ze=-122.52<-20168 Statuses=0009 0009 16:32:48 Msec=750 True Az=153.255 Ze=-122.52 Az status=0009 Ze status=0009 16:32:48 Check angles 16:32:48 SkyScan query 16:32:49 SkyScan query done: ret=0 az=170.76<-11384 ze=-101.67<-18778 Statuses=0009 0009 16:32:49 Msec=1500 True Az=170.76 Ze=-101.67 Az status=0009 Ze status=0009 16:32:49 Check angles 16:32:49 SkyScan query 16:32:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.205<-17347 Statuses=0008 0009 16:32:50 Msec=2250 True Az=175.995 Ze=-80.205 Az status=0008 Ze status=0009 16:32:50 Check angles 16:32:50 SkyScan query 16:32:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.235<-15949 Statuses=0008 0009 16:32:50 Msec=3000 True Az=175.995 Ze=-59.235 Az status=0008 Ze status=0009 16:32:50 Check angles 16:32:50 SkyScan query 16:32:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:32:51 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:32:51 Message to Master queued w/err=0: serial=227313 error=0 16:32:56 Received message from Master: op=Filter serial=227314 16:32:56 Color wheel filter change from 0 to 0 16:32:56 FLIGetFilterPos err=0 currentPosition=0 16:32:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:56 Filter is already there-color wheel unchanged 16:32:56 Received message from Master: op=Shutter serial=227315 16:32:56 Shutter LASER close 16:32:56 Received message from Camera: op=State serial=227317 16:32:56 GetSingleValue result=40 Value=cccccccc 16:32:56 SkyScan query 16:32:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:32:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:57 Parameters OK 16:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:57 Set A/D data flow result=40 16:32:57 Set A/D channel type result=40 16:32:57 Set A/D encoding result=40 16:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:57 Set channel filter=0.000000e+000 result=40 16:32:57 Config A/D Result=40 16:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:57 Get A/D filter: -9.255963e+061 result=40 16:32:57 Get A/D value=-858993460 result=40 16:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:57 Parameters OK 16:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:57 Set A/D data flow result=40 16:32:57 Set A/D channel type result=40 16:32:57 Set A/D encoding result=40 16:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:57 Set channel filter=0.000000e+000 result=40 16:32:57 Config A/D Result=40 16:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:57 Get A/D filter: -9.255963e+061 result=40 16:32:57 Get A/D value=-858993460 result=40 16:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:57 Aux= 16:32:57 Message to Camera, serial 227317 queued 16:33:33 Received message from Master: op=PointingHead serial=227329 16:33:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:33:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:33:33 Point started: ret=0 16:33:33 point_skyscan result=0 16:33:34 Check angles 16:33:34 SkyScan query 16:33:35 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.285<-13419 Statuses=0009 0009 16:33:35 Msec=0 True Az=152.7 Ze=-21.285 Az status=0009 Ze status=0009 16:33:35 Check angles 16:33:35 SkyScan query 16:33:35 SkyScan query done: ret=0 az=134.745<-8983 ze=0.09<-11994 Statuses=0009 0009 16:33:35 Msec=750 True Az=134.745 Ze=0.09 Az status=0009 Ze status=0009 16:33:36 Check angles 16:33:36 SkyScan query 16:33:36 SkyScan query done: ret=0 az=117.36<-7824 ze=21.09<-10594 Statuses=0009 0009 16:33:36 Msec=1500 True Az=117.36 Ze=21.09 Az status=0009 Ze status=0009 16:33:36 Check angles 16:33:36 SkyScan query 16:33:37 SkyScan query done: ret=0 az=99.93<-6662 ze=42<-9200 Statuses=0009 0009 16:33:37 Msec=2250 True Az=99.93 Ze=42 Az status=0009 Ze status=0009 16:33:37 Check angles 16:33:37 SkyScan query 16:33:38 SkyScan query done: ret=0 az=86.025<-5735 ze=51.57<-8562 Statuses=0009 0008 16:33:38 Msec=3000 True Az=86.025 Ze=51.57 Az status=0009 Ze status=0008 16:33:38 Check angles 16:33:38 SkyScan query 16:33:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:33:38 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 16:33:38 Message to Master queued w/err=0: serial=227329 error=0 16:33:43 Received message from Master: op=Filter serial=227330 16:33:43 Color wheel filter change from 0 to 0 16:33:43 FLIGetFilterPos err=0 currentPosition=0 16:33:43 FLIGetStepsRemaining err=0 RemainingSteps=0 16:33:43 Filter is already there-color wheel unchanged 16:33:44 Received message from Master: op=Shutter serial=227331 16:33:44 Shutter LASER close 16:33:44 Received message from Camera: op=State serial=227333 16:33:44 GetSingleValue result=40 Value=cccccccc 16:33:44 SkyScan query 16:33:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:33:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:44 Parameters OK 16:33:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:44 Set A/D data flow result=40 16:33:44 Set A/D channel type result=40 16:33:44 Set A/D encoding result=40 16:33:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:44 Set channel filter=0.000000e+000 result=40 16:33:44 Config A/D Result=40 16:33:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:44 Get A/D filter: -9.255963e+061 result=40 16:33:44 Get A/D value=-858993460 result=40 16:33:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:44 Parameters OK 16:33:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:44 Set A/D data flow result=40 16:33:44 Set A/D channel type result=40 16:33:44 Set A/D encoding result=40 16:33:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:44 Set channel filter=0.000000e+000 result=40 16:33:44 Config A/D Result=40 16:33:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:44 Get A/D filter: -9.255963e+061 result=40 16:33:44 Get A/D value=-858993460 result=40 16:33:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:33:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:33:44 Aux= 16:33:44 Message to Camera, serial 227333 queued 16:34:21 Received message from Master: op=PointingHead serial=227346 16:34:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:34:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:34:21 Point started: ret=0 16:34:21 point_skyscan result=0 16:34:22 Check angles 16:34:22 SkyScan query 16:34:23 SkyScan query done: ret=0 az=109.095<-7273 ze=38.49<-9434 Statuses=0009 0008 16:34:23 Msec=0 True Az=109.095 Ze=38.49 Az status=0009 Ze status=0008 16:34:23 Check angles 16:34:23 SkyScan query 16:34:23 SkyScan query done: ret=0 az=126.885<-8459 ze=38.505<-9433 Statuses=0009 0008 16:34:23 Msec=750 True Az=126.885 Ze=38.505 Az status=0009 Ze status=0008 16:34:24 Check angles 16:34:24 SkyScan query 16:34:24 SkyScan query done: ret=0 az=144.66<-9644 ze=38.505<-9433 Statuses=0009 0008 16:34:24 Msec=1500 True Az=144.66 Ze=38.505 Az status=0009 Ze status=0008 16:34:24 Check angles 16:34:24 SkyScan query 16:34:25 SkyScan query done: ret=0 az=162.105<-10807 ze=38.505<-9433 Statuses=0009 0008 16:34:25 Msec=2250 True Az=162.105 Ze=38.505 Az status=0009 Ze status=0008 16:34:25 Check angles 16:34:25 SkyScan query 16:34:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:34:26 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:34:26 Check angles 16:34:26 SkyScan query 16:34:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:34:26 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:34:26 Message to Master queued w/err=0: serial=227346 error=0 16:34:31 Received message from Master: op=Filter serial=227347 16:34:31 Color wheel filter change from 0 to 0 16:34:31 FLIGetFilterPos err=0 currentPosition=0 16:34:31 FLIGetStepsRemaining err=0 RemainingSteps=0 16:34:31 Filter is already there-color wheel unchanged 16:34:32 Received message from Master: op=Shutter serial=227348 16:34:32 Shutter LASER close 16:34:32 Received message from Camera: op=State serial=227350 16:34:32 GetSingleValue result=40 Value=cccccccc 16:34:32 SkyScan query 16:34:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:34:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:32 Parameters OK 16:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:32 Set A/D data flow result=40 16:34:32 Set A/D channel type result=40 16:34:32 Set A/D encoding result=40 16:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:32 Set channel filter=0.000000e+000 result=40 16:34:32 Config A/D Result=40 16:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:32 Get A/D filter: -9.255963e+061 result=40 16:34:32 Get A/D value=-858993460 result=40 16:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:32 Parameters OK 16:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:32 Set A/D data flow result=40 16:34:32 Set A/D channel type result=40 16:34:32 Set A/D encoding result=40 16:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:32 Set channel filter=0.000000e+000 result=40 16:34:32 Config A/D Result=40 16:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:32 Get A/D filter: -9.255963e+061 result=40 16:34:32 Get A/D value=-858993460 result=40 16:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:34:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:34:32 Aux= 16:34:32 Message to Camera, serial 227350 queued 16:35:09 Received message from Master: op=PointingHead serial=227363 16:35:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:35:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:35:09 Point started: ret=0 16:35:09 point_skyscan result=0 16:35:10 Check angles 16:35:10 SkyScan query 16:35:11 SkyScan query done: ret=0 az=153.21<-10214 ze=9.03<-11398 Statuses=0009 0009 16:35:11 Msec=0 True Az=153.21 Ze=9.03 Az status=0009 Ze status=0009 16:35:11 Check angles 16:35:11 SkyScan query 16:35:11 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.015<-12801 Statuses=0009 0009 16:35:11 Msec=750 True Az=135.78 Ze=-12.015 Az status=0009 Ze status=0009 16:35:12 Check angles 16:35:12 SkyScan query 16:35:12 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.375<-14225 Statuses=0009 0009 16:35:12 Msec=1500 True Az=117.81 Ze=-33.375 Az status=0009 Ze status=0009 16:35:12 Check angles 16:35:12 SkyScan query 16:35:13 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.54<-15436 Statuses=0009 0009 16:35:13 Msec=2250 True Az=100.47 Ze=-51.54 Az status=0009 Ze status=0009 16:35:13 Check angles 16:35:13 SkyScan query 16:35:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 16:35:14 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 16:35:14 Check angles 16:35:14 SkyScan query 16:35:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:35:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:35:14 Message to Master queued w/err=0: serial=227363 error=0 16:35:19 Received message from Master: op=Filter serial=227364 16:35:19 Color wheel filter change from 0 to 0 16:35:19 FLIGetFilterPos err=0 currentPosition=0 16:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:35:19 Filter is already there-color wheel unchanged 16:35:20 Received message from Master: op=Shutter serial=227365 16:35:20 Shutter LASER close 16:35:20 Received message from Camera: op=State serial=227367 16:35:20 GetSingleValue result=40 Value=cccccccc 16:35:20 SkyScan query 16:35:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:20 Parameters OK 16:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:20 Set A/D data flow result=40 16:35:20 Set A/D channel type result=40 16:35:20 Set A/D encoding result=40 16:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:20 Set channel filter=0.000000e+000 result=40 16:35:20 Config A/D Result=40 16:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:20 Get A/D filter: -9.255963e+061 result=40 16:35:20 Get A/D value=-858993460 result=40 16:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:20 Parameters OK 16:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:20 Set A/D data flow result=40 16:35:20 Set A/D channel type result=40 16:35:20 Set A/D encoding result=40 16:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:20 Set channel filter=0.000000e+000 result=40 16:35:20 Config A/D Result=40 16:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:20 Get A/D filter: -9.255963e+061 result=40 16:35:20 Get A/D value=-858993460 result=40 16:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:35:20 Aux= 16:35:20 Message to Camera, serial 227367 queued [UTC 2018-12-17 16:35:52] 16:35:57 Received message from Master: op=PointingHead serial=227380 16:35:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:35:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:35:57 Point started: ret=0 16:35:57 point_skyscan result=0 16:35:58 Check angles 16:35:58 SkyScan query 16:35:59 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.69<-17446 Statuses=0009 0009 16:35:59 Msec=0 True Az=109.35 Ze=-81.69 Az status=0009 Ze status=0009 16:35:59 Check angles 16:35:59 SkyScan query 16:36:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.615<-18841 Statuses=0008 0009 16:36:00 Msec=750 True Az=112.995 Ze=-102.615 Az status=0008 Ze status=0009 16:36:00 Check angles 16:36:00 SkyScan query 16:36:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.585<-20239 Statuses=0008 0009 16:36:00 Msec=1500 True Az=112.995 Ze=-123.585 Az status=0008 Ze status=0009 16:36:00 Check angles 16:36:00 SkyScan query 16:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 16:36:01 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 16:36:01 Check angles 16:36:01 SkyScan query 16:36:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 16:36:02 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 16:36:02 Check angles 16:36:02 SkyScan query 16:36:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 16:36:03 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 16:36:03 Message to Master queued w/err=0: serial=227380 error=0 16:36:08 Received message from Master: op=Filter serial=227381 16:36:08 Color wheel filter change from 0 to 0 16:36:08 FLIGetFilterPos err=0 currentPosition=0 16:36:08 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:08 Filter is already there-color wheel unchanged 16:36:08 Received message from Master: op=Shutter serial=227382 16:36:08 Shutter LASER open 16:36:08 Received message from Camera: op=State serial=227384 16:36:08 GetSingleValue result=40 Value=cccccccc 16:36:08 SkyScan query 16:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:36:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:08 Parameters OK 16:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:08 Set A/D data flow result=40 16:36:08 Set A/D channel type result=40 16:36:08 Set A/D encoding result=40 16:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:08 Set channel filter=0.000000e+000 result=40 16:36:08 Config A/D Result=40 16:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:08 Get A/D filter: -9.255963e+061 result=40 16:36:08 Get A/D value=-858993460 result=40 16:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:08 Parameters OK 16:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:08 Set A/D data flow result=40 16:36:08 Set A/D channel type result=40 16:36:08 Set A/D encoding result=40 16:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:08 Set channel filter=0.000000e+000 result=40 16:36:08 Config A/D Result=40 16:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:08 Get A/D filter: -9.255963e+061 result=40 16:36:08 Get A/D value=-858993460 result=40 16:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:08 Aux= 16:36:08 Message to Camera, serial 227384 queued 16:36:17 Received message from Master: op=Shutter serial=227394 16:36:17 Shutter LASER close 16:36:17 Received message from Master: op=PointingHead serial=227398 16:36:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:36:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:36:18 Point started: ret=0 16:36:18 point_skyscan result=0 16:36:18 Check angles 16:36:18 SkyScan query 16:36:19 SkyScan query done: ret=0 az=90.03<-6002 ze=157.335<-1511 Statuses=0009 0009 16:36:19 Msec=0 True Az=90.03 Ze=157.335 Az status=0009 Ze status=0009 16:36:19 Check angles 16:36:19 SkyScan query 16:36:20 SkyScan query done: ret=0 az=72.045<-4803 ze=135.96<-2936 Statuses=0009 0009 16:36:20 Msec=750 True Az=72.045 Ze=135.96 Az status=0009 Ze status=0009 16:36:20 Check angles 16:36:20 SkyScan query 16:36:21 SkyScan query done: ret=0 az=54.765<-3651 ze=114.975<-4335 Statuses=0009 0009 16:36:21 Msec=1500 True Az=54.765 Ze=114.975 Az status=0009 Ze status=0009 16:36:21 Check angles 16:36:21 SkyScan query 16:36:21 SkyScan query done: ret=0 az=41.01<-2734 ze=94.035<-5731 Statuses=0009 0009 16:36:21 Msec=2250 True Az=41.01 Ze=94.035 Az status=0009 Ze status=0009 16:36:21 Check angles 16:36:21 SkyScan query 16:36:22 SkyScan query done: ret=0 az=40.98<-2732 ze=72.615<-7159 Statuses=0008 0009 16:36:22 Msec=3000 True Az=40.98 Ze=72.615 Az status=0008 Ze status=0009 16:36:22 Check angles 16:36:22 SkyScan query 16:36:23 SkyScan query done: ret=0 az=40.98<-2732 ze=52.365<-8509 Statuses=0008 0009 16:36:23 Msec=3750 True Az=40.98 Ze=52.365 Az status=0008 Ze status=0009 16:36:23 Check angles 16:36:23 SkyScan query 16:36:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:36:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:36:24 Message to Master queued w/err=0: serial=227398 error=0 16:36:29 Received message from Master: op=Filter serial=227399 16:36:29 Color wheel filter change from 0 to 0 16:36:29 FLIGetFilterPos err=0 currentPosition=0 16:36:29 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:29 Filter is already there-color wheel unchanged 16:36:29 Received message from Master: op=Shutter serial=227400 16:36:29 Shutter LASER close 16:36:29 Received message from Camera: op=State serial=227402 16:36:29 GetSingleValue result=40 Value=cccccccc 16:36:29 SkyScan query 16:36:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:36:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:29 Parameters OK 16:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:29 Set A/D data flow result=40 16:36:29 Set A/D channel type result=40 16:36:29 Set A/D encoding result=40 16:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:29 Set channel filter=0.000000e+000 result=40 16:36:29 Config A/D Result=40 16:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:29 Get A/D filter: -9.255963e+061 result=40 16:36:29 Get A/D value=-858993460 result=40 16:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:29 Parameters OK 16:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:29 Set A/D data flow result=40 16:36:29 Set A/D channel type result=40 16:36:29 Set A/D encoding result=40 16:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:29 Set channel filter=0.000000e+000 result=40 16:36:29 Config A/D Result=40 16:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:29 Get A/D filter: -9.255963e+061 result=40 16:36:29 Get A/D value=-858993460 result=40 16:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:29 Aux= 16:36:29 Message to Camera, serial 227402 queued 16:37:06 Received message from Master: op=PointingHead serial=227415 16:37:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:37:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:37:07 Point started: ret=0 16:37:07 point_skyscan result=0 16:37:07 Check angles 16:37:07 SkyScan query 16:37:08 SkyScan query done: ret=0 az=63.795<-4253 ze=66.54<-7564 Statuses=0009 0008 16:37:08 Msec=0 True Az=63.795 Ze=66.54 Az status=0009 Ze status=0008 16:37:08 Check angles 16:37:08 SkyScan query 16:37:09 SkyScan query done: ret=0 az=81.6<-5440 ze=66.51<-7566 Statuses=0009 0008 16:37:09 Msec=750 True Az=81.6 Ze=66.51 Az status=0009 Ze status=0008 16:37:09 Check angles 16:37:09 SkyScan query 16:37:09 SkyScan query done: ret=0 az=99.075<-6605 ze=66.495<-7567 Statuses=0009 0008 16:37:09 Msec=1500 True Az=99.075 Ze=66.495 Az status=0009 Ze status=0008 16:37:10 Check angles 16:37:10 SkyScan query 16:37:10 SkyScan query done: ret=0 az=116.595<-7773 ze=66.495<-7567 Statuses=0009 0008 16:37:10 Msec=2250 True Az=116.595 Ze=66.495 Az status=0009 Ze status=0008 16:37:10 Check angles 16:37:10 SkyScan query 16:37:11 SkyScan query done: ret=0 az=133.995<-8933 ze=66.495<-7567 Statuses=0009 0008 16:37:11 Msec=3000 True Az=133.995 Ze=66.495 Az status=0009 Ze status=0008 16:37:11 Check angles 16:37:11 SkyScan query 16:37:12 SkyScan query done: ret=0 az=151.425<-10095 ze=66.495<-7567 Statuses=0009 0008 16:37:12 Msec=3750 True Az=151.425 Ze=66.495 Az status=0009 Ze status=0008 16:37:12 Check angles 16:37:12 SkyScan query 16:37:12 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:37:12 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:37:12 Message to Master queued w/err=0: serial=227415 error=0 16:37:17 Received message from Master: op=Filter serial=227416 16:37:17 Color wheel filter change from 0 to 0 16:37:17 FLIGetFilterPos err=0 currentPosition=0 16:37:17 FLIGetStepsRemaining err=0 RemainingSteps=0 16:37:17 Filter is already there-color wheel unchanged 16:37:18 Received message from Master: op=Shutter serial=227417 16:37:18 Shutter LASER close 16:37:18 Received message from Camera: op=State serial=227419 16:37:18 GetSingleValue result=40 Value=cccccccc 16:37:18 SkyScan query 16:37:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:37:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:18 Parameters OK 16:37:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:18 Set A/D data flow result=40 16:37:18 Set A/D channel type result=40 16:37:18 Set A/D encoding result=40 16:37:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:18 Set channel filter=0.000000e+000 result=40 16:37:18 Config A/D Result=40 16:37:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:18 Get A/D filter: -9.255963e+061 result=40 16:37:18 Get A/D value=-858993460 result=40 16:37:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:18 Parameters OK 16:37:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:18 Set A/D data flow result=40 16:37:18 Set A/D channel type result=40 16:37:18 Set A/D encoding result=40 16:37:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:18 Set channel filter=0.000000e+000 result=40 16:37:18 Config A/D Result=40 16:37:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:18 Get A/D filter: -9.255963e+061 result=40 16:37:18 Get A/D value=-858993460 result=40 16:37:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:37:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:37:18 Aux= 16:37:18 Message to Camera, serial 227419 queued 16:37:55 Received message from Master: op=PointingHead serial=227432 16:37:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:37:55 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:37:55 Point started: ret=0 16:37:55 point_skyscan result=0 16:37:56 Check angles 16:37:56 SkyScan query 16:37:57 SkyScan query done: ret=0 az=135.105<-9007 ze=36.84<-9544 Statuses=0009 0009 16:37:57 Msec=0 True Az=135.105 Ze=36.84 Az status=0009 Ze status=0009 16:37:57 Check angles 16:37:57 SkyScan query 16:37:58 SkyScan query done: ret=0 az=117.6<-7840 ze=15.9<-10940 Statuses=0009 0009 16:37:58 Msec=750 True Az=117.6 Ze=15.9 Az status=0009 Ze status=0009 16:37:58 Check angles 16:37:58 SkyScan query 16:37:58 SkyScan query done: ret=0 az=100.26<-6684 ze=-5.07<-12338 Statuses=0009 0009 16:37:58 Msec=1500 True Az=100.26 Ze=-5.07 Az status=0009 Ze status=0009 16:37:58 Check angles 16:37:58 SkyScan query 16:37:59 SkyScan query done: ret=0 az=82.71<-5514 ze=-26.055<-13737 Statuses=0009 0009 16:37:59 Msec=2250 True Az=82.71 Ze=-26.055 Az status=0009 Ze status=0009 16:37:59 Check angles 16:37:59 SkyScan query 16:38:00 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.58<-14572 Statuses=0009 0008 16:38:00 Msec=3000 True Az=64.845 Ze=-38.58 Az status=0009 Ze status=0008 16:38:00 Check angles 16:38:00 SkyScan query 16:38:01 SkyScan query done: ret=0 az=47.4<-3160 ze=-38.52<-14568 Statuses=0009 0008 16:38:01 Msec=3750 True Az=47.4 Ze=-38.52 Az status=0009 Ze status=0008 16:38:01 Check angles 16:38:01 SkyScan query 16:38:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:38:01 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:38:01 Message to Master queued w/err=0: serial=227432 error=0 16:38:06 Received message from Master: op=Filter serial=227433 16:38:06 Color wheel filter change from 0 to 0 16:38:06 FLIGetFilterPos err=0 currentPosition=0 16:38:06 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:06 Filter is already there-color wheel unchanged 16:38:06 Received message from Master: op=Shutter serial=227434 16:38:06 Shutter LASER close 16:38:07 Received message from Camera: op=State serial=227436 16:38:07 GetSingleValue result=40 Value=cccccccc 16:38:07 SkyScan query 16:38:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:38:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:07 Parameters OK 16:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:07 Set A/D data flow result=40 16:38:07 Set A/D channel type result=40 16:38:07 Set A/D encoding result=40 16:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:07 Set channel filter=0.000000e+000 result=40 16:38:07 Config A/D Result=40 16:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:07 Get A/D filter: -9.255963e+061 result=40 16:38:07 Get A/D value=-858993460 result=40 16:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:07 Parameters OK 16:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:07 Set A/D data flow result=40 16:38:07 Set A/D channel type result=40 16:38:07 Set A/D encoding result=40 16:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:07 Set channel filter=0.000000e+000 result=40 16:38:07 Config A/D Result=40 16:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:07 Get A/D filter: -9.255963e+061 result=40 16:38:07 Get A/D value=-858993460 result=40 16:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:07 Aux= 16:38:07 Message to Camera, serial 227436 queued 16:38:43 Received message from Master: op=PointingHead serial=227448 16:38:43 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:38:43 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:38:43 Point started: ret=0 16:38:43 point_skyscan result=0 16:38:44 Check angles 16:38:44 SkyScan query 16:38:45 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.46<-16564 Statuses=0009 0009 16:38:45 Msec=0 True Az=64.17 Ze=-68.46 Az status=0009 Ze status=0009 16:38:45 Check angles 16:38:45 SkyScan query 16:38:45 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.415<-17961 Statuses=0009 0009 16:38:45 Msec=750 True Az=81.615 Ze=-89.415 Az status=0009 Ze status=0009 16:38:46 Check angles 16:38:46 SkyScan query 16:38:46 SkyScan query done: ret=0 az=99.015<-6601 ze=-110.37<-19358 Statuses=0009 0009 16:38:46 Msec=1500 True Az=99.015 Ze=-110.37 Az status=0009 Ze status=0009 16:38:46 Check angles 16:38:46 SkyScan query 16:38:47 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.295<-20753 Statuses=0009 0009 16:38:47 Msec=2250 True Az=116.52 Ze=-131.295 Az status=0009 Ze status=0009 16:38:47 Check angles 16:38:47 SkyScan query 16:38:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 16:38:48 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 16:38:48 Check angles 16:38:48 SkyScan query 16:38:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 16:38:48 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 16:38:48 Message to Master queued w/err=0: serial=227448 error=0 16:38:53 Received message from Master: op=Filter serial=227449 16:38:53 Color wheel filter change from 0 to 0 16:38:53 FLIGetFilterPos err=0 currentPosition=0 16:38:53 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:53 Filter is already there-color wheel unchanged 16:38:54 Received message from Master: op=Shutter serial=227450 16:38:54 Shutter LASER close 16:38:54 Received message from Camera: op=State serial=227452 16:38:54 GetSingleValue result=40 Value=cccccccc 16:38:54 SkyScan query 16:38:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:38:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:54 Parameters OK 16:38:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:54 Set A/D data flow result=40 16:38:54 Set A/D channel type result=40 16:38:54 Set A/D encoding result=40 16:38:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:54 Set channel filter=0.000000e+000 result=40 16:38:54 Config A/D Result=40 16:38:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:54 Get A/D filter: -9.255963e+061 result=40 16:38:54 Get A/D value=-858993460 result=40 16:38:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:54 Parameters OK 16:38:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:54 Set A/D data flow result=40 16:38:54 Set A/D channel type result=40 16:38:54 Set A/D encoding result=40 16:38:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:54 Set channel filter=0.000000e+000 result=40 16:38:54 Config A/D Result=40 16:38:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:54 Get A/D filter: -9.255963e+061 result=40 16:38:54 Get A/D value=-858993460 result=40 16:38:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:54 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:54 Aux= 16:38:54 Message to Camera, serial 227452 queued 16:39:31 Received message from Master: op=PointingHead serial=227465 16:39:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:39:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:39:31 Point started: ret=0 16:39:31 point_skyscan result=0 16:39:32 Check angles 16:39:32 SkyScan query 16:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0009 0009 16:39:33 Msec=0 True Az=112.995 Ze=-171.42 Az status=0009 Ze status=0009 16:39:33 Check angles 16:39:33 SkyScan query 16:39:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:39:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:39:34 Message to Master queued w/err=0: serial=227465 error=0 16:39:39 Received message from Master: op=Filter serial=227466 16:39:39 Color wheel filter change from 0 to 0 16:39:39 FLIGetFilterPos err=0 currentPosition=0 16:39:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:39:39 Filter is already there-color wheel unchanged 16:39:39 Received message from Master: op=Shutter serial=227467 16:39:39 Shutter LASER open 16:39:39 Received message from Camera: op=State serial=227469 16:39:39 GetSingleValue result=40 Value=cccccccc 16:39:39 SkyScan query 16:39:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:39:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:40 Parameters OK 16:39:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:40 Set A/D data flow result=40 16:39:40 Set A/D channel type result=40 16:39:40 Set A/D encoding result=40 16:39:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:40 Set channel filter=0.000000e+000 result=40 16:39:40 Config A/D Result=40 16:39:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:40 Get A/D filter: -9.255963e+061 result=40 16:39:40 Get A/D value=-858993460 result=40 16:39:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:40 Parameters OK 16:39:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:40 Set A/D data flow result=40 16:39:40 Set A/D channel type result=40 16:39:40 Set A/D encoding result=40 16:39:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:40 Set channel filter=0.000000e+000 result=40 16:39:40 Config A/D Result=40 16:39:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:40 Get A/D filter: -9.255963e+061 result=40 16:39:40 Get A/D value=-858993460 result=40 16:39:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:39:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:39:40 Aux= 16:39:40 Message to Camera, serial 227469 queued 16:39:48 Received message from Master: op=Shutter serial=227479 16:39:48 Shutter LASER close 16:39:49 Received message from Master: op=PointingHead serial=227483 16:39:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:39:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:39:49 Point started: ret=0 16:39:49 point_skyscan result=0 16:39:50 Check angles 16:39:50 SkyScan query 16:39:50 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.34<-21556 Statuses=0009 0009 16:39:50 Msec=0 True Az=135.915 Ze=-143.34 Az status=0009 Ze status=0009 16:39:50 Check angles 16:39:50 SkyScan query 16:39:51 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.905<-20127 Statuses=0009 0009 16:39:51 Msec=750 True Az=153.78 Ze=-121.905 Az status=0009 Ze status=0009 16:39:51 Check angles 16:39:51 SkyScan query 16:39:52 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.89<-18726 Statuses=0009 0009 16:39:52 Msec=1500 True Az=171.39 Ze=-100.89 Az status=0009 Ze status=0009 16:39:52 Check angles 16:39:52 SkyScan query 16:39:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.515<-17301 Statuses=0008 0009 16:39:52 Msec=2250 True Az=175.995 Ze=-79.515 Az status=0008 Ze status=0009 16:39:53 Check angles 16:39:53 SkyScan query 16:39:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.545<-15903 Statuses=0008 0009 16:39:53 Msec=3000 True Az=175.995 Ze=-58.545 Az status=0008 Ze status=0009 16:39:53 Check angles 16:39:53 SkyScan query 16:39:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:39:54 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:39:54 Message to Master queued w/err=0: serial=227483 error=0 16:39:59 Received message from Master: op=Filter serial=227484 16:39:59 Color wheel filter change from 0 to 0 16:39:59 FLIGetFilterPos err=0 currentPosition=0 16:39:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:39:59 Filter is already there-color wheel unchanged 16:39:59 Received message from Master: op=Shutter serial=227485 16:39:59 Shutter LASER close 16:39:59 Received message from Camera: op=State serial=227487 16:39:59 GetSingleValue result=40 Value=cccccccc 16:39:59 SkyScan query 16:40:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:40:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:00 Parameters OK 16:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:00 Set A/D data flow result=40 16:40:00 Set A/D channel type result=40 16:40:00 Set A/D encoding result=40 16:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:00 Set channel filter=0.000000e+000 result=40 16:40:00 Config A/D Result=40 16:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:00 Get A/D filter: -9.255963e+061 result=40 16:40:00 Get A/D value=-858993460 result=40 16:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:00 Parameters OK 16:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:00 Set A/D data flow result=40 16:40:00 Set A/D channel type result=40 16:40:00 Set A/D encoding result=40 16:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:00 Set channel filter=0.000000e+000 result=40 16:40:00 Config A/D Result=40 16:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:00 Get A/D filter: -9.255963e+061 result=40 16:40:00 Get A/D value=-858993460 result=40 16:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:40:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:40:00 Aux= 16:40:00 Message to Camera, serial 227487 queued 16:40:37 Received message from Master: op=PointingHead serial=227500 16:40:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:40:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:40:37 Point started: ret=0 16:40:37 point_skyscan result=0 16:40:38 Check angles 16:40:38 SkyScan query 16:40:38 SkyScan query done: ret=0 az=152.295<-10153 ze=-21.255<-13417 Statuses=0009 0009 16:40:38 Msec=0 True Az=152.295 Ze=-21.255 Az status=0009 Ze status=0009 16:40:39 Check angles 16:40:39 SkyScan query 16:40:39 SkyScan query done: ret=0 az=134.37<-8958 ze=0.105<-11993 Statuses=0009 0009 16:40:39 Msec=750 True Az=134.37 Ze=0.105 Az status=0009 Ze status=0009 16:40:39 Check angles 16:40:39 SkyScan query 16:40:40 SkyScan query done: ret=0 az=116.925<-7795 ze=21.105<-10593 Statuses=0009 0009 16:40:40 Msec=1500 True Az=116.925 Ze=21.105 Az status=0009 Ze status=0009 16:40:40 Check angles 16:40:40 SkyScan query 16:40:41 SkyScan query done: ret=0 az=99.6<-6640 ze=42.015<-9199 Statuses=0009 0009 16:40:41 Msec=2250 True Az=99.6 Ze=42.015 Az status=0009 Ze status=0009 16:40:41 Check angles 16:40:41 SkyScan query 16:40:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 16:40:41 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 16:40:42 Check angles 16:40:42 SkyScan query 16:40:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:40:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:40:42 Message to Master queued w/err=0: serial=227500 error=0 16:40:47 Received message from Master: op=Filter serial=227501 16:40:47 Color wheel filter change from 0 to 0 16:40:47 FLIGetFilterPos err=0 currentPosition=0 16:40:47 FLIGetStepsRemaining err=0 RemainingSteps=0 16:40:47 Filter is already there-color wheel unchanged 16:40:47 Received message from Master: op=Shutter serial=227502 16:40:47 Shutter LASER close 16:40:47 Received message from Camera: op=State serial=227504 16:40:47 GetSingleValue result=40 Value=cccccccc 16:40:47 SkyScan query 16:40:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:40:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:48 Parameters OK 16:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:48 Set A/D data flow result=40 16:40:48 Set A/D channel type result=40 16:40:48 Set A/D encoding result=40 16:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:48 Set channel filter=0.000000e+000 result=40 16:40:48 Config A/D Result=40 16:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:48 Get A/D filter: -9.255963e+061 result=40 16:40:48 Get A/D value=-858993460 result=40 16:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:48 Parameters OK 16:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:48 Set A/D data flow result=40 16:40:48 Set A/D channel type result=40 16:40:48 Set A/D encoding result=40 16:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:48 Set channel filter=0.000000e+000 result=40 16:40:48 Config A/D Result=40 16:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:48 Get A/D filter: -9.255963e+061 result=40 16:40:48 Get A/D value=-858993460 result=40 16:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:40:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:40:48 Aux= 16:40:48 Message to Camera, serial 227504 queued 16:41:25 Received message from Master: op=PointingHead serial=227517 16:41:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:41:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:41:25 Point started: ret=0 16:41:25 point_skyscan result=0 16:41:26 Check angles 16:41:26 SkyScan query 16:41:27 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 16:41:27 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 16:41:27 Check angles 16:41:27 SkyScan query 16:41:27 SkyScan query done: ret=0 az=126.255<-8417 ze=38.505<-9433 Statuses=0009 0008 16:41:27 Msec=750 True Az=126.255 Ze=38.505 Az status=0009 Ze status=0008 16:41:27 Check angles 16:41:27 SkyScan query 16:41:28 SkyScan query done: ret=0 az=143.73<-9582 ze=38.505<-9433 Statuses=0009 0008 16:41:28 Msec=1500 True Az=143.73 Ze=38.505 Az status=0009 Ze status=0008 16:41:28 Check angles 16:41:28 SkyScan query 16:41:29 SkyScan query done: ret=0 az=161.01<-10734 ze=38.505<-9433 Statuses=0009 0008 16:41:29 Msec=2250 True Az=161.01 Ze=38.505 Az status=0009 Ze status=0008 16:41:29 Check angles 16:41:29 SkyScan query 16:41:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:41:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:41:30 Check angles 16:41:30 SkyScan query 16:41:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:41:30 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:41:30 Message to Master queued w/err=0: serial=227517 error=0 16:41:35 Received message from Master: op=Filter serial=227518 16:41:35 Color wheel filter change from 0 to 0 16:41:35 FLIGetFilterPos err=0 currentPosition=0 16:41:35 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:35 Filter is already there-color wheel unchanged 16:41:35 Received message from Master: op=Shutter serial=227519 16:41:35 Shutter LASER close 16:41:35 Received message from Camera: op=State serial=227521 16:41:35 GetSingleValue result=40 Value=cccccccc 16:41:35 SkyScan query 16:41:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:41:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:36 Parameters OK 16:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:36 Set A/D data flow result=40 16:41:36 Set A/D channel type result=40 16:41:36 Set A/D encoding result=40 16:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:36 Set channel filter=0.000000e+000 result=40 16:41:36 Config A/D Result=40 16:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:36 Get A/D filter: -9.255963e+061 result=40 16:41:36 Get A/D value=-858993460 result=40 16:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:36 Parameters OK 16:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:36 Set A/D data flow result=40 16:41:36 Set A/D channel type result=40 16:41:36 Set A/D encoding result=40 16:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:36 Set channel filter=0.000000e+000 result=40 16:41:36 Config A/D Result=40 16:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:36 Get A/D filter: -9.255963e+061 result=40 16:41:36 Get A/D value=-858993460 result=40 16:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:36 Aux= 16:41:36 Message to Camera, serial 227521 queued 16:42:13 Received message from Master: op=PointingHead serial=227534 16:42:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:42:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:42:13 Point started: ret=0 16:42:13 point_skyscan result=0 16:42:14 Check angles 16:42:14 SkyScan query 16:42:15 SkyScan query done: ret=0 az=153.225<-10215 ze=8.955<-11403 Statuses=0009 0009 16:42:15 Msec=0 True Az=153.225 Ze=8.955 Az status=0009 Ze status=0009 16:42:15 Check angles 16:42:15 SkyScan query 16:42:15 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.015<-12801 Statuses=0009 0009 16:42:15 Msec=750 True Az=135.765 Ze=-12.015 Az status=0009 Ze status=0009 16:42:15 Check angles 16:42:15 SkyScan query 16:42:16 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.39<-14226 Statuses=0009 0009 16:42:16 Msec=1500 True Az=117.93 Ze=-33.39 Az status=0009 Ze status=0009 16:42:16 Check angles 16:42:16 SkyScan query 16:42:17 SkyScan query done: ret=0 az=100.53<-6702 ze=-51.555<-15437 Statuses=0009 0009 16:42:17 Msec=2250 True Az=100.53 Ze=-51.555 Az status=0009 Ze status=0009 16:42:17 Check angles 16:42:17 SkyScan query 16:42:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 16:42:18 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 16:42:18 Check angles 16:42:18 SkyScan query 16:42:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:42:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:42:18 Message to Master queued w/err=0: serial=227534 error=0 16:42:23 Received message from Master: op=Filter serial=227535 16:42:23 Color wheel filter change from 0 to 0 16:42:23 FLIGetFilterPos err=0 currentPosition=0 16:42:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:42:23 Filter is already there-color wheel unchanged 16:42:23 Received message from Master: op=Shutter serial=227536 16:42:23 Shutter LASER close 16:42:24 Received message from Camera: op=State serial=227538 16:42:24 GetSingleValue result=40 Value=cccccccc 16:42:24 SkyScan query 16:42:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:42:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:24 Parameters OK 16:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:24 Set A/D data flow result=40 16:42:24 Set A/D channel type result=40 16:42:24 Set A/D encoding result=40 16:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:24 Set channel filter=0.000000e+000 result=40 16:42:24 Config A/D Result=40 16:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:24 Get A/D filter: -9.255963e+061 result=40 16:42:24 Get A/D value=-858993460 result=40 16:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:24 Parameters OK 16:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:24 Set A/D data flow result=40 16:42:24 Set A/D channel type result=40 16:42:24 Set A/D encoding result=40 16:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:24 Set channel filter=0.000000e+000 result=40 16:42:24 Config A/D Result=40 16:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:24 Get A/D filter: -9.255963e+061 result=40 16:42:24 Get A/D value=-858993460 result=40 16:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:42:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:42:24 Aux= 16:42:24 Message to Camera, serial 227538 queued 16:43:01 Received message from Master: op=PointingHead serial=227551 16:43:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:43:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:43:01 Point started: ret=0 16:43:01 point_skyscan result=0 16:43:02 Check angles 16:43:02 SkyScan query 16:43:03 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.39<-17426 Statuses=0009 0009 16:43:03 Msec=0 True Az=109.14 Ze=-81.39 Az status=0009 Ze status=0009 16:43:03 Check angles 16:43:03 SkyScan query 16:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.765<-18851 Statuses=0008 0009 16:43:03 Msec=750 True Az=112.995 Ze=-102.765 Az status=0008 Ze status=0009 16:43:04 Check angles 16:43:04 SkyScan query 16:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.825<-20255 Statuses=0008 0009 16:43:04 Msec=1500 True Az=112.995 Ze=-123.825 Az status=0008 Ze status=0009 16:43:04 Check angles 16:43:04 SkyScan query 16:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 16:43:05 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 16:43:05 Check angles 16:43:05 SkyScan query 16:43:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 16:43:06 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 16:43:06 Check angles 16:43:06 SkyScan query 16:43:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:43:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:43:06 Message to Master queued w/err=0: serial=227551 error=0 16:43:11 Received message from Master: op=Filter serial=227552 16:43:11 Color wheel filter change from 0 to 0 16:43:11 FLIGetFilterPos err=0 currentPosition=0 16:43:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:11 Filter is already there-color wheel unchanged 16:43:12 Received message from Master: op=Shutter serial=227553 16:43:12 Shutter LASER open 16:43:12 Received message from Camera: op=State serial=227555 16:43:12 GetSingleValue result=40 Value=cccccccc 16:43:12 SkyScan query 16:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:12 Parameters OK 16:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:12 Set A/D data flow result=40 16:43:12 Set A/D channel type result=40 16:43:12 Set A/D encoding result=40 16:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:12 Set channel filter=0.000000e+000 result=40 16:43:12 Config A/D Result=40 16:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:12 Get A/D filter: -9.255963e+061 result=40 16:43:12 Get A/D value=-858993460 result=40 16:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:12 Parameters OK 16:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:12 Set A/D data flow result=40 16:43:12 Set A/D channel type result=40 16:43:12 Set A/D encoding result=40 16:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:12 Set channel filter=0.000000e+000 result=40 16:43:12 Config A/D Result=40 16:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:12 Get A/D filter: -9.255963e+061 result=40 16:43:12 Get A/D value=-858993460 result=40 16:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:12 Aux= 16:43:12 Message to Camera, serial 227555 queued 16:43:21 Received message from Master: op=Shutter serial=227565 16:43:21 Shutter LASER close 16:43:21 Received message from Master: op=PointingHead serial=227569 16:43:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:43:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:43:22 Point started: ret=0 16:43:22 point_skyscan result=0 16:43:22 Check angles 16:43:22 SkyScan query 16:43:23 SkyScan query done: ret=0 az=89.865<-5991 ze=157.305<-1513 Statuses=0009 0009 16:43:23 Msec=0 True Az=89.865 Ze=157.305 Az status=0009 Ze status=0009 16:43:23 Check angles 16:43:23 SkyScan query 16:43:24 SkyScan query done: ret=0 az=72.495<-4833 ze=136.365<-2909 Statuses=0009 0009 16:43:24 Msec=750 True Az=72.495 Ze=136.365 Az status=0009 Ze status=0009 16:43:24 Check angles 16:43:24 SkyScan query 16:43:24 SkyScan query done: ret=0 az=55.02<-3668 ze=115.41<-4306 Statuses=0009 0009 16:43:24 Msec=1500 True Az=55.02 Ze=115.41 Az status=0009 Ze status=0009 16:43:25 Check angles 16:43:25 SkyScan query 16:43:25 SkyScan query done: ret=0 az=40.965<-2731 ze=94.41<-5706 Statuses=0009 0009 16:43:25 Msec=2250 True Az=40.965 Ze=94.41 Az status=0009 Ze status=0009 16:43:25 Check angles 16:43:25 SkyScan query 16:43:26 SkyScan query done: ret=0 az=40.995<-2733 ze=73.485<-7101 Statuses=0008 0009 16:43:26 Msec=3000 True Az=40.995 Ze=73.485 Az status=0008 Ze status=0009 16:43:26 Check angles 16:43:26 SkyScan query 16:43:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.89<-8474 Statuses=0008 0009 16:43:27 Msec=3750 True Az=40.995 Ze=52.89 Az status=0008 Ze status=0009 16:43:27 Check angles 16:43:27 SkyScan query 16:43:27 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 16:43:27 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 16:43:27 Message to Master queued w/err=0: serial=227569 error=0 16:43:32 Received message from Master: op=Filter serial=227570 16:43:32 Color wheel filter change from 0 to 0 16:43:32 FLIGetFilterPos err=0 currentPosition=0 16:43:32 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:32 Filter is already there-color wheel unchanged 16:43:33 Received message from Master: op=Shutter serial=227571 16:43:33 Shutter LASER close 16:43:33 Received message from Camera: op=State serial=227573 16:43:33 GetSingleValue result=40 Value=cccccccc 16:43:33 SkyScan query 16:43:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:43:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:33 Parameters OK 16:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:33 Set A/D data flow result=40 16:43:33 Set A/D channel type result=40 16:43:33 Set A/D encoding result=40 16:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:33 Set channel filter=0.000000e+000 result=40 16:43:33 Config A/D Result=40 16:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:33 Get A/D filter: -9.255963e+061 result=40 16:43:33 Get A/D value=-858993460 result=40 16:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:33 Parameters OK 16:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:33 Set A/D data flow result=40 16:43:33 Set A/D channel type result=40 16:43:33 Set A/D encoding result=40 16:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:33 Set channel filter=0.000000e+000 result=40 16:43:33 Config A/D Result=40 16:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:33 Get A/D filter: -9.255963e+061 result=40 16:43:33 Get A/D value=-858993460 result=40 16:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:33 Aux= 16:43:33 Message to Camera, serial 227573 queued 16:44:10 Received message from Master: op=PointingHead serial=227586 16:44:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:44:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:44:11 Point started: ret=0 16:44:11 point_skyscan result=0 16:44:11 Check angles 16:44:11 SkyScan query 16:44:12 SkyScan query done: ret=0 az=63.93<-4262 ze=66.555<-7563 Statuses=0009 0008 16:44:12 Msec=0 True Az=63.93 Ze=66.555 Az status=0009 Ze status=0008 16:44:12 Check angles 16:44:12 SkyScan query 16:44:13 SkyScan query done: ret=0 az=81.255<-5417 ze=66.51<-7566 Statuses=0009 0008 16:44:13 Msec=750 True Az=81.255 Ze=66.51 Az status=0009 Ze status=0008 16:44:13 Check angles 16:44:13 SkyScan query 16:44:13 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 16:44:13 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 16:44:14 Check angles 16:44:14 SkyScan query 16:44:14 SkyScan query done: ret=0 az=116.565<-7771 ze=66.495<-7567 Statuses=0009 0008 16:44:14 Msec=2250 True Az=116.565 Ze=66.495 Az status=0009 Ze status=0008 16:44:14 Check angles 16:44:14 SkyScan query 16:44:15 SkyScan query done: ret=0 az=134.13<-8942 ze=66.495<-7567 Statuses=0009 0008 16:44:15 Msec=3000 True Az=134.13 Ze=66.495 Az status=0009 Ze status=0008 16:44:15 Check angles 16:44:15 SkyScan query 16:44:16 SkyScan query done: ret=0 az=151.485<-10099 ze=66.495<-7567 Statuses=0009 0008 16:44:16 Msec=3750 True Az=151.485 Ze=66.495 Az status=0009 Ze status=0008 16:44:16 Check angles 16:44:16 SkyScan query 16:44:16 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:44:16 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:44:16 Message to Master queued w/err=0: serial=227586 error=0 16:44:21 Received message from Master: op=Filter serial=227587 16:44:21 Color wheel filter change from 0 to 0 16:44:21 FLIGetFilterPos err=0 currentPosition=0 16:44:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:44:21 Filter is already there-color wheel unchanged 16:44:22 Received message from Master: op=Shutter serial=227588 16:44:22 Shutter LASER close 16:44:22 Received message from Camera: op=State serial=227590 16:44:22 GetSingleValue result=40 Value=cccccccc 16:44:22 SkyScan query 16:44:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:44:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:22 Parameters OK 16:44:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:22 Set A/D data flow result=40 16:44:22 Set A/D channel type result=40 16:44:22 Set A/D encoding result=40 16:44:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:22 Set channel filter=0.000000e+000 result=40 16:44:22 Config A/D Result=40 16:44:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:22 Get A/D filter: -9.255963e+061 result=40 16:44:22 Get A/D value=-858993460 result=40 16:44:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:22 Parameters OK 16:44:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:22 Set A/D data flow result=40 16:44:22 Set A/D channel type result=40 16:44:22 Set A/D encoding result=40 16:44:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:22 Set channel filter=0.000000e+000 result=40 16:44:22 Config A/D Result=40 16:44:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:22 Get A/D filter: -9.255963e+061 result=40 16:44:22 Get A/D value=-858993460 result=40 16:44:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:44:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:44:22 Aux= 16:44:22 Message to Camera, serial 227590 queued 16:44:59 Received message from Master: op=PointingHead serial=227603 16:44:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:44:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:44:59 Point started: ret=0 16:44:59 point_skyscan result=0 16:45:00 Check angles 16:45:00 SkyScan query 16:45:01 SkyScan query done: ret=0 az=134.82<-8988 ze=36.57<-9562 Statuses=0009 0009 16:45:01 Msec=0 True Az=134.82 Ze=36.57 Az status=0009 Ze status=0009 16:45:01 Check angles 16:45:01 SkyScan query 16:45:01 SkyScan query done: ret=0 az=116.94<-7796 ze=15.135<-10991 Statuses=0009 0009 16:45:01 Msec=750 True Az=116.94 Ze=15.135 Az status=0009 Ze status=0009 16:45:02 Check angles 16:45:02 SkyScan query 16:45:02 SkyScan query done: ret=0 az=99.12<-6608 ze=-6.33<-12422 Statuses=0009 0009 16:45:02 Msec=1500 True Az=99.12 Ze=-6.33 Az status=0009 Ze status=0009 16:45:02 Check angles 16:45:02 SkyScan query 16:45:03 SkyScan query done: ret=0 az=81.765<-5451 ze=-27.225<-13815 Statuses=0009 0009 16:45:03 Msec=2250 True Az=81.765 Ze=-27.225 Az status=0009 Ze status=0009 16:45:03 Check angles 16:45:03 SkyScan query 16:45:04 SkyScan query done: ret=0 az=64.17<-4278 ze=-38.58<-14572 Statuses=0009 0008 16:45:04 Msec=3000 True Az=64.17 Ze=-38.58 Az status=0009 Ze status=0008 16:45:04 Check angles 16:45:04 SkyScan query 16:45:04 SkyScan query done: ret=0 az=46.695<-3113 ze=-38.52<-14568 Statuses=0009 0008 16:45:04 Msec=3750 True Az=46.695 Ze=-38.52 Az status=0009 Ze status=0008 16:45:05 Check angles 16:45:05 SkyScan query 16:45:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:45:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:45:05 Message to Master queued w/err=0: serial=227603 error=0 16:45:10 Received message from Master: op=Filter serial=227604 16:45:10 Color wheel filter change from 0 to 0 16:45:10 FLIGetFilterPos err=0 currentPosition=0 16:45:10 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:10 Filter is already there-color wheel unchanged 16:45:10 Received message from Master: op=Shutter serial=227605 16:45:10 Shutter LASER close 16:45:10 Received message from Camera: op=State serial=227607 16:45:10 GetSingleValue result=40 Value=cccccccc 16:45:10 SkyScan query 16:45:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:45:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:11 Parameters OK 16:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:11 Set A/D data flow result=40 16:45:11 Set A/D channel type result=40 16:45:11 Set A/D encoding result=40 16:45:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:11 Set channel filter=0.000000e+000 result=40 16:45:11 Config A/D Result=40 16:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:11 Get A/D filter: -9.255963e+061 result=40 16:45:11 Get A/D value=-858993460 result=40 16:45:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:11 Parameters OK 16:45:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:11 Set A/D data flow result=40 16:45:11 Set A/D channel type result=40 16:45:11 Set A/D encoding result=40 16:45:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:11 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-17 16:45:11] 16:45:11 Config A/D Result=40 16:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:11 Get A/D filter: -9.255963e+061 result=40 16:45:11 Get A/D value=-858993460 result=40 16:45:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:11 Aux= 16:45:11 Message to Camera, serial 227607 queued 16:45:27 Received message from Master: op=Identify serial=227608 16:45:48 Received message from Master: op=PointingHead serial=227623 16:45:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:45:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:45:48 Point started: ret=0 16:45:48 point_skyscan result=0 16:45:49 Check angles 16:45:49 SkyScan query 16:45:50 SkyScan query done: ret=0 az=63.735<-4249 ze=-68.04<-16536 Statuses=0009 0009 16:45:50 Msec=0 True Az=63.735 Ze=-68.04 Az status=0009 Ze status=0009 16:45:50 Check angles 16:45:50 SkyScan query 16:45:50 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.445<-17963 Statuses=0009 0009 16:45:50 Msec=750 True Az=81.57 Ze=-89.445 Az status=0009 Ze status=0009 16:45:50 Check angles 16:45:50 SkyScan query 16:45:51 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.82<-19388 Statuses=0009 0009 16:45:51 Msec=1500 True Az=99.405 Ze=-110.82 Az status=0009 Ze status=0009 16:45:51 Check angles 16:45:51 SkyScan query 16:45:52 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.73<-20782 Statuses=0009 0009 16:45:52 Msec=2250 True Az=116.865 Ze=-131.73 Az status=0009 Ze status=0009 16:45:52 Check angles 16:45:52 SkyScan query 16:45:53 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.54<-21436 Statuses=0009 0008 16:45:53 Msec=3000 True Az=131.025 Ze=-141.54 Az status=0009 Ze status=0008 16:45:53 Check angles 16:45:53 SkyScan query 16:45:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:45:53 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:45:53 Message to Master queued w/err=0: serial=227623 error=0 16:45:58 Received message from Master: op=Filter serial=227624 16:45:58 Color wheel filter change from 0 to 0 16:45:58 FLIGetFilterPos err=0 currentPosition=0 16:45:58 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:58 Filter is already there-color wheel unchanged 16:45:58 Received message from Master: op=Shutter serial=227625 16:45:58 Shutter LASER close 16:45:59 Received message from Camera: op=State serial=227627 16:45:59 GetSingleValue result=40 Value=cccccccc 16:45:59 SkyScan query 16:45:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:45:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:59 Parameters OK 16:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:59 Set A/D data flow result=40 16:45:59 Set A/D channel type result=40 16:45:59 Set A/D encoding result=40 16:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:59 Set channel filter=0.000000e+000 result=40 16:45:59 Config A/D Result=40 16:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:59 Get A/D filter: -9.255963e+061 result=40 16:45:59 Get A/D value=-858993460 result=40 16:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:59 Parameters OK 16:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:59 Set A/D data flow result=40 16:45:59 Set A/D channel type result=40 16:45:59 Set A/D encoding result=40 16:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:59 Set channel filter=0.000000e+000 result=40 16:45:59 Config A/D Result=40 16:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:59 Get A/D filter: -9.255963e+061 result=40 16:45:59 Get A/D value=-858993460 result=40 16:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:59 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:59 Aux= 16:45:59 Message to Camera, serial 227627 queued 16:46:36 Received message from Master: op=PointingHead serial=227640 16:46:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:46:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:46:36 Point started: ret=0 16:46:36 point_skyscan result=0 16:46:37 Check angles 16:46:37 SkyScan query 16:46:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 16:46:38 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 16:46:38 Check angles 16:46:38 SkyScan query 16:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:46:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:46:38 Message to Master queued w/err=0: serial=227640 error=0 16:46:43 Received message from Master: op=Filter serial=227641 16:46:43 Color wheel filter change from 0 to 0 16:46:43 FLIGetFilterPos err=0 currentPosition=0 16:46:43 FLIGetStepsRemaining err=0 RemainingSteps=0 16:46:43 Filter is already there-color wheel unchanged 16:46:44 Received message from Master: op=Shutter serial=227642 16:46:44 Shutter LASER open 16:46:44 Received message from Camera: op=State serial=227644 16:46:44 GetSingleValue result=40 Value=cccccccc 16:46:44 SkyScan query 16:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:46:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:44 Parameters OK 16:46:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:44 Set A/D data flow result=40 16:46:44 Set A/D channel type result=40 16:46:44 Set A/D encoding result=40 16:46:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:44 Set channel filter=0.000000e+000 result=40 16:46:44 Config A/D Result=40 16:46:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:44 Get A/D filter: -9.255963e+061 result=40 16:46:44 Get A/D value=-858993460 result=40 16:46:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:44 Parameters OK 16:46:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:44 Set A/D data flow result=40 16:46:44 Set A/D channel type result=40 16:46:44 Set A/D encoding result=40 16:46:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:44 Set channel filter=0.000000e+000 result=40 16:46:44 Config A/D Result=40 16:46:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:44 Get A/D filter: -9.255963e+061 result=40 16:46:44 Get A/D value=-858993460 result=40 16:46:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:46:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:46:44 Aux= 16:46:44 Message to Camera, serial 227644 queued 16:46:53 Received message from Master: op=Shutter serial=227654 16:46:53 Shutter LASER close 16:46:53 Received message from Master: op=PointingHead serial=227658 16:46:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:46:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:46:54 Point started: ret=0 16:46:54 point_skyscan result=0 16:46:54 Check angles 16:46:54 SkyScan query 16:46:55 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.1<-21540 Statuses=0009 0009 16:46:55 Msec=0 True Az=136.02 Ze=-143.1 Az status=0009 Ze status=0009 16:46:55 Check angles 16:46:55 SkyScan query 16:46:56 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.145<-20143 Statuses=0009 0009 16:46:56 Msec=750 True Az=153.615 Ze=-122.145 Az status=0009 Ze status=0009 16:46:56 Check angles 16:46:56 SkyScan query 16:46:56 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.205<-18747 Statuses=0009 0009 16:46:56 Msec=1500 True Az=171.06 Ze=-101.205 Az status=0009 Ze status=0009 16:46:57 Check angles 16:46:57 SkyScan query 16:46:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.28<-17352 Statuses=0008 0009 16:46:57 Msec=2250 True Az=175.995 Ze=-80.28 Az status=0008 Ze status=0009 16:46:57 Check angles 16:46:57 SkyScan query 16:46:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.295<-15953 Statuses=0008 0009 16:46:58 Msec=3000 True Az=175.995 Ze=-59.295 Az status=0008 Ze status=0009 16:46:58 Check angles 16:46:58 SkyScan query 16:46:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:46:59 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:46:59 Message to Master queued w/err=0: serial=227658 error=0 16:47:04 Received message from Master: op=Filter serial=227659 16:47:04 Color wheel filter change from 0 to 0 16:47:04 FLIGetFilterPos err=0 currentPosition=0 16:47:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:47:04 Filter is already there-color wheel unchanged 16:47:04 Received message from Master: op=Shutter serial=227660 16:47:04 Shutter LASER close 16:47:04 Received message from Camera: op=State serial=227662 16:47:04 GetSingleValue result=40 Value=cccccccc 16:47:04 SkyScan query 16:47:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:47:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:05 Parameters OK 16:47:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:05 Set A/D data flow result=40 16:47:05 Set A/D channel type result=40 16:47:05 Set A/D encoding result=40 16:47:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:05 Set channel filter=0.000000e+000 result=40 16:47:05 Config A/D Result=40 16:47:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:05 Get A/D filter: -9.255963e+061 result=40 16:47:05 Get A/D value=-858993460 result=40 16:47:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:05 Parameters OK 16:47:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:05 Set A/D data flow result=40 16:47:05 Set A/D channel type result=40 16:47:05 Set A/D encoding result=40 16:47:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:05 Set channel filter=0.000000e+000 result=40 16:47:05 Config A/D Result=40 16:47:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:05 Get A/D filter: -9.255963e+061 result=40 16:47:05 Get A/D value=-858993460 result=40 16:47:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:47:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:47:05 Aux= 16:47:05 Message to Camera, serial 227662 queued 16:47:41 Received message from Master: op=PointingHead serial=227674 16:47:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:47:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:47:41 Point started: ret=0 16:47:41 point_skyscan result=0 16:47:42 Check angles 16:47:42 SkyScan query 16:47:42 SkyScan query done: ret=0 az=152.64<-10176 ze=-21.18<-13412 Statuses=0009 0009 16:47:42 Msec=0 True Az=152.64 Ze=-21.18 Az status=0009 Ze status=0009 16:47:42 Check angles 16:47:42 SkyScan query 16:47:43 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.255<-12017 Statuses=0009 0009 16:47:43 Msec=750 True Az=135.09 Ze=-0.255 Az status=0009 Ze status=0009 16:47:43 Check angles 16:47:43 SkyScan query 16:47:44 SkyScan query done: ret=0 az=117.285<-7819 ze=21.18<-10588 Statuses=0009 0009 16:47:44 Msec=1500 True Az=117.285 Ze=21.18 Az status=0009 Ze status=0009 16:47:44 Check angles 16:47:44 SkyScan query 16:47:45 SkyScan query done: ret=0 az=99.465<-6631 ze=42.51<-9166 Statuses=0009 0009 16:47:45 Msec=2250 True Az=99.465 Ze=42.51 Az status=0009 Ze status=0009 16:47:45 Check angles 16:47:45 SkyScan query 16:47:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 16:47:45 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 16:47:45 Check angles 16:47:45 SkyScan query 16:47:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:47:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:47:46 Message to Master queued w/err=0: serial=227674 error=0 16:47:51 Received message from Master: op=Filter serial=227675 16:47:51 Color wheel filter change from 0 to 0 16:47:51 FLIGetFilterPos err=0 currentPosition=0 16:47:51 FLIGetStepsRemaining err=0 RemainingSteps=0 16:47:51 Filter is already there-color wheel unchanged 16:47:51 Received message from Master: op=Shutter serial=227676 16:47:51 Shutter LASER close 16:47:51 Received message from Camera: op=State serial=227678 16:47:51 GetSingleValue result=40 Value=cccccccc 16:47:51 SkyScan query 16:47:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:47:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:52 Parameters OK 16:47:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:52 Set A/D data flow result=40 16:47:52 Set A/D channel type result=40 16:47:52 Set A/D encoding result=40 16:47:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:52 Set channel filter=0.000000e+000 result=40 16:47:52 Config A/D Result=40 16:47:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:52 Get A/D filter: -9.255963e+061 result=40 16:47:52 Get A/D value=-858993460 result=40 16:47:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:52 Parameters OK 16:47:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:52 Set A/D data flow result=40 16:47:52 Set A/D channel type result=40 16:47:52 Set A/D encoding result=40 16:47:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:52 Set channel filter=0.000000e+000 result=40 16:47:52 Config A/D Result=40 16:47:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:52 Get A/D filter: -9.255963e+061 result=40 16:47:52 Get A/D value=-858993460 result=40 16:47:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:47:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:47:52 Aux= 16:47:52 Message to Camera, serial 227678 queued 16:48:29 Received message from Master: op=PointingHead serial=227691 16:48:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:48:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:48:29 Point started: ret=0 16:48:29 point_skyscan result=0 16:48:30 Check angles 16:48:30 SkyScan query 16:48:30 SkyScan query done: ret=0 az=109.335<-7289 ze=38.49<-9434 Statuses=0009 0008 16:48:30 Msec=0 True Az=109.335 Ze=38.49 Az status=0009 Ze status=0008 16:48:31 Check angles 16:48:31 SkyScan query 16:48:31 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 16:48:31 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 16:48:31 Check angles 16:48:31 SkyScan query 16:48:32 SkyScan query done: ret=0 az=144.525<-9635 ze=38.505<-9433 Statuses=0009 0008 16:48:32 Msec=1500 True Az=144.525 Ze=38.505 Az status=0009 Ze status=0008 16:48:32 Check angles 16:48:32 SkyScan query 16:48:33 SkyScan query done: ret=0 az=162.045<-10803 ze=38.505<-9433 Statuses=0009 0008 16:48:33 Msec=2250 True Az=162.045 Ze=38.505 Az status=0009 Ze status=0008 16:48:33 Check angles 16:48:33 SkyScan query 16:48:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:48:33 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:48:34 Check angles 16:48:34 SkyScan query 16:48:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:48:34 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:48:34 Message to Master queued w/err=0: serial=227691 error=0 16:48:39 Received message from Master: op=Filter serial=227692 16:48:39 Color wheel filter change from 0 to 0 16:48:39 FLIGetFilterPos err=0 currentPosition=0 16:48:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:39 Filter is already there-color wheel unchanged 16:48:39 Received message from Master: op=Shutter serial=227693 16:48:39 Shutter LASER close 16:48:39 Received message from Camera: op=State serial=227695 16:48:39 GetSingleValue result=40 Value=cccccccc 16:48:39 SkyScan query 16:48:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:48:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:40 Parameters OK 16:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:40 Set A/D data flow result=40 16:48:40 Set A/D channel type result=40 16:48:40 Set A/D encoding result=40 16:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:40 Set channel filter=0.000000e+000 result=40 16:48:40 Config A/D Result=40 16:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:40 Get A/D filter: -9.255963e+061 result=40 16:48:40 Get A/D value=-858993460 result=40 16:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:40 Parameters OK 16:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:40 Set A/D data flow result=40 16:48:40 Set A/D channel type result=40 16:48:40 Set A/D encoding result=40 16:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:40 Set channel filter=0.000000e+000 result=40 16:48:40 Config A/D Result=40 16:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:40 Get A/D filter: -9.255963e+061 result=40 16:48:40 Get A/D value=-858993460 result=40 16:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:40 Aux= 16:48:40 Message to Camera, serial 227695 queued 16:49:17 Received message from Master: op=PointingHead serial=227708 16:49:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:49:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:49:17 Point started: ret=0 16:49:17 point_skyscan result=0 16:49:18 Check angles 16:49:18 SkyScan query 16:49:18 SkyScan query done: ret=0 az=153.225<-10215 ze=9<-11400 Statuses=0009 0009 16:49:18 Msec=0 True Az=153.225 Ze=9 Az status=0009 Ze status=0009 16:49:19 Check angles 16:49:19 SkyScan query 16:49:19 SkyScan query done: ret=0 az=135.78<-9052 ze=-12<-12800 Statuses=0009 0009 16:49:19 Msec=750 True Az=135.78 Ze=-12 Az status=0009 Ze status=0009 16:49:19 Check angles 16:49:19 SkyScan query 16:49:20 SkyScan query done: ret=0 az=118.29<-7886 ze=-32.91<-14194 Statuses=0009 0009 16:49:20 Msec=1500 True Az=118.29 Ze=-32.91 Az status=0009 Ze status=0009 16:49:20 Check angles 16:49:20 SkyScan query 16:49:21 SkyScan query done: ret=0 az=100.875<-6725 ze=-51.51<-15434 Statuses=0009 0009 16:49:21 Msec=2250 True Az=100.875 Ze=-51.51 Az status=0009 Ze status=0009 16:49:21 Check angles 16:49:21 SkyScan query 16:49:21 SkyScan query done: ret=0 az=85.965<-5731 ze=-51.525<-15435 Statuses=0009 0008 16:49:21 Msec=3000 True Az=85.965 Ze=-51.525 Az status=0009 Ze status=0008 16:49:22 Check angles 16:49:22 SkyScan query 16:49:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:49:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:49:22 Message to Master queued w/err=0: serial=227708 error=0 16:49:27 Received message from Master: op=Filter serial=227709 16:49:27 Color wheel filter change from 0 to 0 16:49:27 FLIGetFilterPos err=0 currentPosition=0 16:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:49:27 Filter is already there-color wheel unchanged 16:49:27 Received message from Master: op=Shutter serial=227710 16:49:27 Shutter LASER close 16:49:27 Received message from Camera: op=State serial=227712 16:49:27 GetSingleValue result=40 Value=cccccccc 16:49:27 SkyScan query 16:49:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:28 Parameters OK 16:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:28 Set A/D data flow result=40 16:49:28 Set A/D channel type result=40 16:49:28 Set A/D encoding result=40 16:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:28 Set channel filter=0.000000e+000 result=40 16:49:28 Config A/D Result=40 16:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:28 Get A/D filter: -9.255963e+061 result=40 16:49:28 Get A/D value=-858993460 result=40 16:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:28 Parameters OK 16:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:28 Set A/D data flow result=40 16:49:28 Set A/D channel type result=40 16:49:28 Set A/D encoding result=40 16:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:28 Set channel filter=0.000000e+000 result=40 16:49:28 Config A/D Result=40 16:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:28 Get A/D filter: -9.255963e+061 result=40 16:49:28 Get A/D value=-858993460 result=40 16:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:49:28 Aux= 16:49:28 Message to Camera, serial 227712 queued 16:50:05 Received message from Master: op=PointingHead serial=227725 16:50:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:50:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:50:05 Point started: ret=0 16:50:05 point_skyscan result=0 16:50:06 Check angles 16:50:06 SkyScan query 16:50:06 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.105<-17407 Statuses=0009 0009 16:50:06 Msec=0 True Az=108.87 Ze=-81.105 Az status=0009 Ze status=0009 16:50:07 Check angles 16:50:07 SkyScan query 16:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 16:50:07 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 16:50:07 Check angles 16:50:07 SkyScan query 16:50:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 16:50:08 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 16:50:08 Check angles 16:50:08 SkyScan query 16:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.42<-21628 Statuses=0008 0009 16:50:09 Msec=2250 True Az=112.995 Ze=-144.42 Az status=0008 Ze status=0009 16:50:09 Check angles 16:50:09 SkyScan query 16:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 16:50:10 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 16:50:10 Check angles 16:50:10 SkyScan query 16:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:50:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:50:10 Message to Master queued w/err=0: serial=227725 error=0 16:50:15 Received message from Master: op=Filter serial=227726 16:50:15 Color wheel filter change from 0 to 0 16:50:15 FLIGetFilterPos err=0 currentPosition=0 16:50:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:50:15 Filter is already there-color wheel unchanged 16:50:15 Received message from Master: op=Shutter serial=227727 16:50:15 Shutter LASER open 16:50:16 Received message from Camera: op=State serial=227729 16:50:16 GetSingleValue result=40 Value=cccccccc 16:50:16 SkyScan query 16:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:50:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:16 Parameters OK 16:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:16 Set A/D data flow result=40 16:50:16 Set A/D channel type result=40 16:50:16 Set A/D encoding result=40 16:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:16 Set channel filter=0.000000e+000 result=40 16:50:16 Config A/D Result=40 16:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:16 Get A/D filter: -9.255963e+061 result=40 16:50:16 Get A/D value=-858993460 result=40 16:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:16 Parameters OK 16:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:16 Set A/D data flow result=40 16:50:16 Set A/D channel type result=40 16:50:16 Set A/D encoding result=40 16:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:16 Set channel filter=0.000000e+000 result=40 16:50:16 Config A/D Result=40 16:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:16 Get A/D filter: -9.255963e+061 result=40 16:50:16 Get A/D value=-858993460 result=40 16:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:50:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:50:16 Aux= 16:50:16 Message to Camera, serial 227729 queued 16:50:25 Received message from Master: op=Shutter serial=227739 16:50:25 Shutter LASER close 16:50:25 Received message from Master: op=PointingHead serial=227743 16:50:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:50:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:50:25 Point started: ret=0 16:50:25 point_skyscan result=0 16:50:26 Check angles 16:50:26 SkyScan query 16:50:27 SkyScan query done: ret=0 az=89.865<-5991 ze=157.23<-1518 Statuses=0009 0009 16:50:27 Msec=0 True Az=89.865 Ze=157.23 Az status=0009 Ze status=0009 16:50:27 Check angles 16:50:27 SkyScan query 16:50:27 SkyScan query done: ret=0 az=72.435<-4829 ze=136.275<-2915 Statuses=0009 0009 16:50:27 Msec=750 True Az=72.435 Ze=136.275 Az status=0009 Ze status=0009 16:50:28 Check angles 16:50:28 SkyScan query 16:50:28 SkyScan query done: ret=0 az=55.08<-3672 ze=115.335<-4311 Statuses=0009 0009 16:50:28 Msec=1500 True Az=55.08 Ze=115.335 Az status=0009 Ze status=0009 16:50:28 Check angles 16:50:28 SkyScan query 16:50:29 SkyScan query done: ret=0 az=41.01<-2734 ze=94.35<-5710 Statuses=0009 0009 16:50:29 Msec=2250 True Az=41.01 Ze=94.35 Az status=0009 Ze status=0009 16:50:29 Check angles 16:50:29 SkyScan query 16:50:30 SkyScan query done: ret=0 az=40.98<-2732 ze=73.38<-7108 Statuses=0008 0009 16:50:30 Msec=3000 True Az=40.98 Ze=73.38 Az status=0008 Ze status=0009 16:50:30 Check angles 16:50:30 SkyScan query 16:50:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 16:50:30 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 16:50:31 Check angles 16:50:31 SkyScan query 16:50:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:50:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:50:31 Message to Master queued w/err=0: serial=227743 error=0 16:50:36 Received message from Master: op=Filter serial=227744 16:50:36 Color wheel filter change from 0 to 0 16:50:36 FLIGetFilterPos err=0 currentPosition=0 16:50:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:50:36 Filter is already there-color wheel unchanged 16:50:36 Received message from Master: op=Shutter serial=227745 16:50:36 Shutter LASER close 16:50:37 Received message from Camera: op=State serial=227747 16:50:37 GetSingleValue result=40 Value=cccccccc 16:50:37 SkyScan query 16:50:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:50:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:37 Parameters OK 16:50:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:37 Set A/D data flow result=40 16:50:37 Set A/D channel type result=40 16:50:37 Set A/D encoding result=40 16:50:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:37 Set channel filter=0.000000e+000 result=40 16:50:37 Config A/D Result=40 16:50:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:37 Get A/D filter: -9.255963e+061 result=40 16:50:37 Get A/D value=-858993460 result=40 16:50:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:37 Parameters OK 16:50:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:37 Set A/D data flow result=40 16:50:37 Set A/D channel type result=40 16:50:37 Set A/D encoding result=40 16:50:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:37 Set channel filter=0.000000e+000 result=40 16:50:37 Config A/D Result=40 16:50:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:37 Get A/D filter: -9.255963e+061 result=40 16:50:37 Get A/D value=-858993460 result=40 16:50:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:50:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:50:37 Aux= 16:50:37 Message to Camera, serial 227747 queued 16:51:14 Received message from Master: op=PointingHead serial=227760 16:51:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:51:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:51:14 Point started: ret=0 16:51:14 point_skyscan result=0 16:51:15 Check angles 16:51:15 SkyScan query 16:51:16 SkyScan query done: ret=0 az=63.9<-4260 ze=66.555<-7563 Statuses=0009 0008 16:51:16 Msec=0 True Az=63.9 Ze=66.555 Az status=0009 Ze status=0008 16:51:16 Check angles 16:51:16 SkyScan query 16:51:16 SkyScan query done: ret=0 az=81.24<-5416 ze=66.495<-7567 Statuses=0009 0008 16:51:16 Msec=750 True Az=81.24 Ze=66.495 Az status=0009 Ze status=0008 16:51:17 Check angles 16:51:17 SkyScan query 16:51:17 SkyScan query done: ret=0 az=98.775<-6585 ze=66.495<-7567 Statuses=0009 0008 16:51:17 Msec=1500 True Az=98.775 Ze=66.495 Az status=0009 Ze status=0008 16:51:17 Check angles 16:51:17 SkyScan query 16:51:18 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 16:51:18 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 16:51:18 Check angles 16:51:18 SkyScan query 16:51:19 SkyScan query done: ret=0 az=133.995<-8933 ze=66.495<-7567 Statuses=0009 0008 16:51:19 Msec=3000 True Az=133.995 Ze=66.495 Az status=0009 Ze status=0008 16:51:19 Check angles 16:51:19 SkyScan query 16:51:19 SkyScan query done: ret=0 az=151.41<-10094 ze=66.495<-7567 Statuses=0009 0008 16:51:19 Msec=3750 True Az=151.41 Ze=66.495 Az status=0009 Ze status=0008 16:51:20 Check angles 16:51:20 SkyScan query 16:51:20 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:51:20 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:51:20 Message to Master queued w/err=0: serial=227760 error=0 16:51:25 Received message from Master: op=Filter serial=227761 16:51:25 Color wheel filter change from 0 to 0 16:51:25 FLIGetFilterPos err=0 currentPosition=0 16:51:25 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:25 Filter is already there-color wheel unchanged 16:51:25 Received message from Master: op=Shutter serial=227762 16:51:25 Shutter LASER close 16:51:25 Received message from Camera: op=State serial=227764 16:51:25 GetSingleValue result=40 Value=cccccccc 16:51:25 SkyScan query 16:51:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:51:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:26 Parameters OK 16:51:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:26 Set A/D data flow result=40 16:51:26 Set A/D channel type result=40 16:51:26 Set A/D encoding result=40 16:51:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:26 Set channel filter=0.000000e+000 result=40 16:51:26 Config A/D Result=40 16:51:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:26 Get A/D filter: -9.255963e+061 result=40 16:51:26 Get A/D value=-858993460 result=40 16:51:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:26 Parameters OK 16:51:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:26 Set A/D data flow result=40 16:51:26 Set A/D channel type result=40 16:51:26 Set A/D encoding result=40 16:51:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:26 Set channel filter=0.000000e+000 result=40 16:51:26 Config A/D Result=40 16:51:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:26 Get A/D filter: -9.255963e+061 result=40 16:51:26 Get A/D value=-858993460 result=40 16:51:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:51:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:51:26 Aux= 16:51:26 Message to Camera, serial 227764 queued 16:52:03 Received message from Master: op=PointingHead serial=227777 16:52:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:52:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:52:03 Point started: ret=0 16:52:03 point_skyscan result=0 16:52:04 Check angles 16:52:04 SkyScan query 16:52:05 SkyScan query done: ret=0 az=134.775<-8985 ze=36.615<-9559 Statuses=0009 0009 16:52:05 Msec=0 True Az=134.775 Ze=36.615 Az status=0009 Ze status=0009 16:52:05 Check angles 16:52:05 SkyScan query 16:52:05 SkyScan query done: ret=0 az=117.285<-7819 ze=15.705<-10953 Statuses=0009 0009 16:52:05 Msec=750 True Az=117.285 Ze=15.705 Az status=0009 Ze status=0009 16:52:05 Check angles 16:52:05 SkyScan query 16:52:06 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.31<-12354 Statuses=0009 0009 16:52:06 Msec=1500 True Az=99.96 Ze=-5.31 Az status=0009 Ze status=0009 16:52:06 Check angles 16:52:06 SkyScan query 16:52:07 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.265<-13751 Statuses=0009 0009 16:52:07 Msec=2250 True Az=82.41 Ze=-26.265 Az status=0009 Ze status=0009 16:52:07 Check angles 16:52:07 SkyScan query 16:52:08 SkyScan query done: ret=0 az=64.935<-4329 ze=-38.58<-14572 Statuses=0009 0008 16:52:08 Msec=3000 True Az=64.935 Ze=-38.58 Az status=0009 Ze status=0008 16:52:08 Check angles 16:52:08 SkyScan query 16:52:08 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.52<-14568 Statuses=0009 0008 16:52:08 Msec=3750 True Az=47.445 Ze=-38.52 Az status=0009 Ze status=0008 16:52:08 Check angles 16:52:08 SkyScan query 16:52:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:52:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:52:09 Message to Master queued w/err=0: serial=227777 error=0 16:52:14 Received message from Master: op=Filter serial=227778 16:52:14 Color wheel filter change from 0 to 0 16:52:14 FLIGetFilterPos err=0 currentPosition=0 16:52:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:52:14 Filter is already there-color wheel unchanged 16:52:14 Received message from Master: op=Shutter serial=227779 16:52:14 Shutter LASER close 16:52:14 Received message from Camera: op=State serial=227781 16:52:14 GetSingleValue result=40 Value=cccccccc 16:52:14 SkyScan query 16:52:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:52:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:15 Parameters OK 16:52:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:15 Set A/D data flow result=40 16:52:15 Set A/D channel type result=40 16:52:15 Set A/D encoding result=40 16:52:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:15 Set channel filter=0.000000e+000 result=40 16:52:15 Config A/D Result=40 16:52:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:15 Get A/D filter: -9.255963e+061 result=40 16:52:15 Get A/D value=-858993460 result=40 16:52:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:15 Parameters OK 16:52:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:15 Set A/D data flow result=40 16:52:15 Set A/D channel type result=40 16:52:15 Set A/D encoding result=40 16:52:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:15 Set channel filter=0.000000e+000 result=40 16:52:15 Config A/D Result=40 16:52:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:15 Get A/D filter: -9.255963e+061 result=40 16:52:15 Get A/D value=-858993460 result=40 16:52:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:52:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:52:15 Aux= 16:52:15 Message to Camera, serial 227781 queued 16:52:51 Received message from Master: op=PointingHead serial=227793 16:52:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:52:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:52:51 Point started: ret=0 16:52:51 point_skyscan result=0 16:52:52 Check angles 16:52:52 SkyScan query 16:52:52 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.145<-16543 Statuses=0009 0009 16:52:52 Msec=0 True Az=63.96 Ze=-68.145 Az status=0009 Ze status=0009 16:52:53 Check angles 16:52:53 SkyScan query 16:52:53 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.1<-17940 Statuses=0009 0009 16:52:53 Msec=750 True Az=81.39 Ze=-89.1 Az status=0009 Ze status=0009 16:52:53 Check angles 16:52:53 SkyScan query 16:52:54 SkyScan query done: ret=0 az=98.82<-6588 ze=-110.01<-19334 Statuses=0009 0009 16:52:54 Msec=1500 True Az=98.82 Ze=-110.01 Az status=0009 Ze status=0009 16:52:54 Check angles 16:52:54 SkyScan query 16:52:55 SkyScan query done: ret=0 az=116.265<-7751 ze=-130.995<-20733 Statuses=0009 0009 16:52:55 Msec=2250 True Az=116.265 Ze=-130.995 Az status=0009 Ze status=0009 16:52:55 Check angles 16:52:55 SkyScan query 16:52:55 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.555<-21437 Statuses=0009 0008 16:52:55 Msec=3000 True Az=130.98 Ze=-141.555 Az status=0009 Ze status=0008 16:52:56 Check angles 16:52:56 SkyScan query 16:52:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 16:52:56 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 16:52:56 Message to Master queued w/err=0: serial=227793 error=0 16:53:01 Received message from Master: op=Filter serial=227794 16:53:01 Color wheel filter change from 0 to 0 16:53:01 FLIGetFilterPos err=0 currentPosition=0 16:53:01 FLIGetStepsRemaining err=0 RemainingSteps=0 16:53:01 Filter is already there-color wheel unchanged 16:53:01 Received message from Master: op=Shutter serial=227795 16:53:01 Shutter LASER close 16:53:01 Received message from Camera: op=State serial=227797 16:53:01 GetSingleValue result=40 Value=cccccccc 16:53:01 SkyScan query 16:53:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:53:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:02 Parameters OK 16:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:02 Set A/D data flow result=40 16:53:02 Set A/D channel type result=40 16:53:02 Set A/D encoding result=40 16:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:02 Set channel filter=0.000000e+000 result=40 16:53:02 Config A/D Result=40 16:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:02 Get A/D filter: -9.255963e+061 result=40 16:53:02 Get A/D value=-858993460 result=40 16:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:02 Parameters OK 16:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:02 Set A/D data flow result=40 16:53:02 Set A/D channel type result=40 16:53:02 Set A/D encoding result=40 16:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:02 Set channel filter=0.000000e+000 result=40 16:53:02 Config A/D Result=40 16:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:02 Get A/D filter: -9.255963e+061 result=40 16:53:02 Get A/D value=-858993460 result=40 16:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:02 Aux= 16:53:02 Message to Camera, serial 227797 queued 16:53:39 Received message from Master: op=PointingHead serial=227810 16:53:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:53:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:53:39 Point started: ret=0 16:53:39 point_skyscan result=0 16:53:40 Check angles 16:53:40 SkyScan query 16:53:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0009 0009 16:53:40 Msec=0 True Az=112.995 Ze=-171.465 Az status=0009 Ze status=0009 16:53:41 Check angles 16:53:41 SkyScan query 16:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:53:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:53:41 Message to Master queued w/err=0: serial=227810 error=0 16:53:46 Received message from Master: op=Filter serial=227811 16:53:46 Color wheel filter change from 0 to 0 16:53:46 FLIGetFilterPos err=0 currentPosition=0 16:53:46 FLIGetStepsRemaining err=0 RemainingSteps=0 16:53:46 Filter is already there-color wheel unchanged 16:53:46 Received message from Master: op=Shutter serial=227812 16:53:46 Shutter LASER open 16:53:47 Received message from Camera: op=State serial=227814 16:53:47 GetSingleValue result=40 Value=cccccccc 16:53:47 SkyScan query 16:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:53:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:47 Parameters OK 16:53:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:47 Set A/D data flow result=40 16:53:47 Set A/D channel type result=40 16:53:47 Set A/D encoding result=40 16:53:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:47 Set channel filter=0.000000e+000 result=40 16:53:47 Config A/D Result=40 16:53:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:47 Get A/D filter: -9.255963e+061 result=40 16:53:47 Get A/D value=-858993460 result=40 16:53:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:47 Parameters OK 16:53:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:47 Set A/D data flow result=40 16:53:47 Set A/D channel type result=40 16:53:47 Set A/D encoding result=40 16:53:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:47 Set channel filter=0.000000e+000 result=40 16:53:47 Config A/D Result=40 16:53:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:47 Get A/D filter: -9.255963e+061 result=40 16:53:47 Get A/D value=-858993460 result=40 16:53:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:47 Aux= 16:53:47 Message to Camera, serial 227814 queued 16:53:56 Received message from Master: op=Shutter serial=227824 16:53:56 Shutter LASER close 16:53:56 Received message from Master: op=PointingHead serial=227828 16:53:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:53:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:53:57 Point started: ret=0 16:53:57 point_skyscan result=0 16:53:57 Check angles 16:53:57 SkyScan query 16:53:58 SkyScan query done: ret=0 az=136.26<-9084 ze=-143.01<-21534 Statuses=0009 0009 16:53:58 Msec=0 True Az=136.26 Ze=-143.01 Az status=0009 Ze status=0009 16:53:58 Check angles 16:53:58 SkyScan query 16:53:59 SkyScan query done: ret=0 az=153.75<-10250 ze=-122.01<-20134 Statuses=0009 0009 16:53:59 Msec=750 True Az=153.75 Ze=-122.01 Az status=0009 Ze status=0009 16:53:59 Check angles 16:53:59 SkyScan query 16:53:59 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.04<-18736 Statuses=0009 0009 16:53:59 Msec=1500 True Az=171.21 Ze=-101.04 Az status=0009 Ze status=0009 16:54:00 Check angles 16:54:00 SkyScan query 16:54:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.16<-17344 Statuses=0008 0009 16:54:00 Msec=2250 True Az=175.995 Ze=-80.16 Az status=0008 Ze status=0009 16:54:00 Check angles 16:54:00 SkyScan query 16:54:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.16<-15944 Statuses=0008 0009 16:54:01 Msec=3000 True Az=175.995 Ze=-59.16 Az status=0008 Ze status=0009 16:54:01 Check angles 16:54:01 SkyScan query 16:54:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:54:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:54:02 Message to Master queued w/err=0: serial=227828 error=0 16:54:07 Received message from Master: op=Filter serial=227829 16:54:07 Color wheel filter change from 0 to 0 16:54:07 FLIGetFilterPos err=0 currentPosition=0 16:54:07 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:07 Filter is already there-color wheel unchanged 16:54:07 Received message from Master: op=Shutter serial=227830 16:54:07 Shutter LASER close 16:54:07 Received message from Camera: op=State serial=227832 16:54:07 GetSingleValue result=40 Value=cccccccc 16:54:07 SkyScan query 16:54:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:54:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:08 Parameters OK 16:54:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:08 Set A/D data flow result=40 16:54:08 Set A/D channel type result=40 16:54:08 Set A/D encoding result=40 16:54:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:08 Set channel filter=0.000000e+000 result=40 16:54:08 Config A/D Result=40 16:54:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:08 Get A/D filter: -9.255963e+061 result=40 16:54:08 Get A/D value=-858993460 result=40 16:54:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:08 Parameters OK 16:54:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:08 Set A/D data flow result=40 16:54:08 Set A/D channel type result=40 16:54:08 Set A/D encoding result=40 16:54:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:08 Set channel filter=0.000000e+000 result=40 16:54:08 Config A/D Result=40 16:54:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:08 Get A/D filter: -9.255963e+061 result=40 16:54:08 Get A/D value=-858993460 result=40 16:54:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:54:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:54:08 Aux= 16:54:08 Message to Camera, serial 227832 queued 16:54:44 Received message from Master: op=PointingHead serial=227845 16:54:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:54:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:54:45 Point started: ret=0 16:54:45 point_skyscan result=0 16:54:45 Check angles 16:54:45 SkyScan query 16:54:46 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.02<-13468 Statuses=0009 0009 16:54:46 Msec=0 True Az=153.21 Ze=-22.02 Az status=0009 Ze status=0009 16:54:46 Check angles 16:54:46 SkyScan query 16:54:47 SkyScan query done: ret=0 az=135.765<-9051 ze=-1.035<-12069 Statuses=0009 0009 16:54:47 Msec=750 True Az=135.765 Ze=-1.035 Az status=0009 Ze status=0009 16:54:47 Check angles 16:54:47 SkyScan query 16:54:48 SkyScan query done: ret=0 az=118.245<-7883 ze=19.905<-10673 Statuses=0009 0009 16:54:48 Msec=1500 True Az=118.245 Ze=19.905 Az status=0009 Ze status=0009 16:54:48 Check angles 16:54:48 SkyScan query 16:54:48 SkyScan query done: ret=0 az=100.83<-6722 ze=40.89<-9274 Statuses=0009 0009 16:54:48 Msec=2250 True Az=100.83 Ze=40.89 Az status=0009 Ze status=0009 16:54:48 Check angles 16:54:48 SkyScan query 16:54:49 SkyScan query done: ret=0 az=85.965<-5731 ze=51.57<-8562 Statuses=0009 0008 16:54:49 Msec=3000 True Az=85.965 Ze=51.57 Az status=0009 Ze status=0008 16:54:49 Check angles 16:54:49 SkyScan query 16:54:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:54:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:54:50 Message to Master queued w/err=0: serial=227845 error=0 16:54:55 Received message from Master: op=Filter serial=227846 16:54:55 Color wheel filter change from 0 to 0 16:54:55 FLIGetFilterPos err=0 currentPosition=0 16:54:55 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:55 Filter is already there-color wheel unchanged 16:54:55 Received message from Master: op=Shutter serial=227847 16:54:55 Shutter LASER close 16:54:55 Received message from Camera: op=State serial=227849 16:54:55 GetSingleValue result=40 Value=cccccccc 16:54:55 SkyScan query 16:54:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:54:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:56 Parameters OK 16:54:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:56 Set A/D data flow result=40 16:54:56 Set A/D channel type result=40 16:54:56 Set A/D encoding result=40 16:54:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:56 Set channel filter=0.000000e+000 result=40 16:54:56 Config A/D Result=40 16:54:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:56 Get A/D filter: -9.255963e+061 result=40 16:54:56 Get A/D value=-858993460 result=40 16:54:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:56 Parameters OK 16:54:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:56 Set A/D data flow result=40 16:54:56 Set A/D channel type result=40 16:54:56 Set A/D encoding result=40 16:54:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:56 Set channel filter=0.000000e+000 result=40 16:54:56 Config A/D Result=40 16:54:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:56 Get A/D filter: -9.255963e+061 result=40 16:54:56 Get A/D value=-858993460 result=40 16:54:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:54:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:54:56 Aux= 16:54:56 Message to Camera, serial 227849 queued 16:55:32 Received message from Master: op=PointingHead serial=227862 16:55:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:55:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:55:33 Point started: ret=0 16:55:33 point_skyscan result=0 16:55:34 Check angles 16:55:34 SkyScan query 16:55:34 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 16:55:34 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 [UTC 2018-12-17 16:55:34] 16:55:34 Check angles 16:55:34 SkyScan query 16:55:35 SkyScan query done: ret=0 az=128.235<-8549 ze=38.505<-9433 Statuses=0009 0008 16:55:35 Msec=750 True Az=128.235 Ze=38.505 Az status=0009 Ze status=0008 16:55:35 Check angles 16:55:35 SkyScan query 16:55:36 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 16:55:36 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 16:55:36 Check angles 16:55:36 SkyScan query 16:55:36 SkyScan query done: ret=0 az=162.06<-10804 ze=38.505<-9433 Statuses=0009 0008 16:55:36 Msec=2250 True Az=162.06 Ze=38.505 Az status=0009 Ze status=0008 16:55:37 Check angles 16:55:37 SkyScan query 16:55:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:55:37 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:55:37 Check angles 16:55:37 SkyScan query 16:55:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:55:38 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 16:55:38 Message to Master queued w/err=0: serial=227862 error=0 16:55:43 Received message from Master: op=Filter serial=227863 16:55:43 Color wheel filter change from 0 to 0 16:55:43 FLIGetFilterPos err=0 currentPosition=0 16:55:43 FLIGetStepsRemaining err=0 RemainingSteps=0 16:55:43 Filter is already there-color wheel unchanged 16:55:43 Received message from Master: op=Shutter serial=227864 16:55:43 Shutter LASER close 16:55:43 Received message from Camera: op=State serial=227866 16:55:43 GetSingleValue result=40 Value=cccccccc 16:55:43 SkyScan query 16:55:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:55:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:44 Parameters OK 16:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:44 Set A/D data flow result=40 16:55:44 Set A/D channel type result=40 16:55:44 Set A/D encoding result=40 16:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:44 Set channel filter=0.000000e+000 result=40 16:55:44 Config A/D Result=40 16:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:44 Get A/D filter: -9.255963e+061 result=40 16:55:44 Get A/D value=-858993460 result=40 16:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:44 Parameters OK 16:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:44 Set A/D data flow result=40 16:55:44 Set A/D channel type result=40 16:55:44 Set A/D encoding result=40 16:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:44 Set channel filter=0.000000e+000 result=40 16:55:44 Config A/D Result=40 16:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:44 Get A/D filter: -9.255963e+061 result=40 16:55:44 Get A/D value=-858993460 result=40 16:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:44 Aux= 16:55:44 Message to Camera, serial 227866 queued [UTC 2018-12-17 16:55:52] 16:56:20 Received message from Master: op=PointingHead serial=227879 16:56:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:56:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:56:21 Point started: ret=0 16:56:21 point_skyscan result=0 16:56:22 Check angles 16:56:22 SkyScan query 16:56:22 SkyScan query done: ret=0 az=152.76<-10184 ze=8.28<-11448 Statuses=0009 0009 16:56:22 Msec=0 True Az=152.76 Ze=8.28 Az status=0009 Ze status=0009 16:56:22 Check angles 16:56:22 SkyScan query 16:56:23 SkyScan query done: ret=0 az=134.91<-8994 ze=-13.035<-12869 Statuses=0009 0009 16:56:23 Msec=750 True Az=134.91 Ze=-13.035 Az status=0009 Ze status=0009 16:56:23 Check angles 16:56:23 SkyScan query 16:56:24 SkyScan query done: ret=0 az=117.42<-7828 ze=-34.02<-14268 Statuses=0009 0009 16:56:24 Msec=1500 True Az=117.42 Ze=-34.02 Az status=0009 Ze status=0009 16:56:24 Check angles 16:56:24 SkyScan query 16:56:24 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.57<-15438 Statuses=0009 0009 16:56:24 Msec=2250 True Az=100.035 Ze=-51.57 Az status=0009 Ze status=0009 16:56:25 Check angles 16:56:25 SkyScan query 16:56:25 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 16:56:25 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 16:56:25 Check angles 16:56:25 SkyScan query 16:56:26 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 16:56:26 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 16:56:26 Message to Master queued w/err=0: serial=227879 error=0 16:56:31 Received message from Master: op=Filter serial=227880 16:56:31 Color wheel filter change from 0 to 0 16:56:31 FLIGetFilterPos err=0 currentPosition=0 16:56:31 FLIGetStepsRemaining err=0 RemainingSteps=0 16:56:31 Filter is already there-color wheel unchanged 16:56:31 Received message from Master: op=Shutter serial=227881 16:56:31 Shutter LASER close 16:56:31 Received message from Camera: op=State serial=227883 16:56:31 GetSingleValue result=40 Value=cccccccc 16:56:31 SkyScan query 16:56:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:56:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:32 Parameters OK 16:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:32 Set A/D data flow result=40 16:56:32 Set A/D channel type result=40 16:56:32 Set A/D encoding result=40 16:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:32 Set channel filter=0.000000e+000 result=40 16:56:32 Config A/D Result=40 16:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:32 Get A/D filter: -9.255963e+061 result=40 16:56:32 Get A/D value=-858993460 result=40 16:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:32 Parameters OK 16:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:32 Set A/D data flow result=40 16:56:32 Set A/D channel type result=40 16:56:32 Set A/D encoding result=40 16:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:32 Set channel filter=0.000000e+000 result=40 16:56:32 Config A/D Result=40 16:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:32 Get A/D filter: -9.255963e+061 result=40 16:56:32 Get A/D value=-858993460 result=40 16:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:56:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:56:32 Aux= 16:56:32 Message to Camera, serial 227883 queued 16:57:09 Received message from Master: op=PointingHead serial=227896 16:57:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:57:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:57:09 Point started: ret=0 16:57:09 point_skyscan result=0 16:57:10 Check angles 16:57:10 SkyScan query 16:57:10 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.195<-17413 Statuses=0009 0009 16:57:10 Msec=0 True Az=108.93 Ze=-81.195 Az status=0009 Ze status=0009 16:57:10 Check angles 16:57:10 SkyScan query 16:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.6<-18840 Statuses=0008 0009 16:57:11 Msec=750 True Az=112.995 Ze=-102.6 Az status=0008 Ze status=0009 16:57:11 Check angles 16:57:11 SkyScan query 16:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.57<-20238 Statuses=0008 0009 16:57:12 Msec=1500 True Az=112.995 Ze=-123.57 Az status=0008 Ze status=0009 16:57:12 Check angles 16:57:12 SkyScan query 16:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.465<-21631 Statuses=0008 0009 16:57:13 Msec=2250 True Az=112.995 Ze=-144.465 Az status=0008 Ze status=0009 16:57:13 Check angles 16:57:13 SkyScan query 16:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.87<-23058 Statuses=0008 0009 16:57:13 Msec=3000 True Az=112.995 Ze=-165.87 Az status=0008 Ze status=0009 16:57:14 Check angles 16:57:14 SkyScan query 16:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:57:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:57:14 Message to Master queued w/err=0: serial=227896 error=0 16:57:19 Received message from Master: op=Filter serial=227897 16:57:19 Color wheel filter change from 0 to 0 16:57:19 FLIGetFilterPos err=0 currentPosition=0 16:57:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:57:19 Filter is already there-color wheel unchanged 16:57:19 Received message from Master: op=Shutter serial=227898 16:57:19 Shutter LASER open 16:57:19 Received message from Camera: op=State serial=227900 16:57:19 GetSingleValue result=40 Value=cccccccc 16:57:19 SkyScan query 16:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:57:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:20 Parameters OK 16:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:20 Set A/D data flow result=40 16:57:20 Set A/D channel type result=40 16:57:20 Set A/D encoding result=40 16:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:20 Set channel filter=0.000000e+000 result=40 16:57:20 Config A/D Result=40 16:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:20 Get A/D filter: -9.255963e+061 result=40 16:57:20 Get A/D value=-858993460 result=40 16:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:20 Parameters OK 16:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:20 Set A/D data flow result=40 16:57:20 Set A/D channel type result=40 16:57:20 Set A/D encoding result=40 16:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:20 Set channel filter=0.000000e+000 result=40 16:57:20 Config A/D Result=40 16:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:20 Get A/D filter: -9.255963e+061 result=40 16:57:20 Get A/D value=-858993460 result=40 16:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:57:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:57:20 Aux= 16:57:20 Message to Camera, serial 227900 queued 16:57:28 Received message from Master: op=Shutter serial=227910 16:57:28 Shutter LASER close 16:57:29 Received message from Master: op=PointingHead serial=227914 16:57:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:57:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:57:29 Point started: ret=0 16:57:29 point_skyscan result=0 16:57:30 Check angles 16:57:30 SkyScan query 16:57:31 SkyScan query done: ret=0 az=90.27<-6018 ze=157.575<-1495 Statuses=0009 0009 16:57:31 Msec=0 True Az=90.27 Ze=157.575 Az status=0009 Ze status=0009 16:57:31 Check angles 16:57:31 SkyScan query 16:57:31 SkyScan query done: ret=0 az=72.315<-4821 ze=136.185<-2921 Statuses=0009 0009 16:57:31 Msec=750 True Az=72.315 Ze=136.185 Az status=0009 Ze status=0009 16:57:32 Check angles 16:57:32 SkyScan query 16:57:32 SkyScan query done: ret=0 az=54.855<-3657 ze=115.245<-4317 Statuses=0009 0009 16:57:32 Msec=1500 True Az=54.855 Ze=115.245 Az status=0009 Ze status=0009 16:57:32 Check angles 16:57:32 SkyScan query 16:57:33 SkyScan query done: ret=0 az=40.98<-2732 ze=93.84<-5744 Statuses=0009 0009 16:57:33 Msec=2250 True Az=40.98 Ze=93.84 Az status=0009 Ze status=0009 16:57:33 Check angles 16:57:33 SkyScan query 16:57:34 SkyScan query done: ret=0 az=40.995<-2733 ze=72.81<-7146 Statuses=0008 0009 16:57:34 Msec=3000 True Az=40.995 Ze=72.81 Az status=0008 Ze status=0009 16:57:34 Check angles 16:57:34 SkyScan query 16:57:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 16:57:34 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 16:57:35 Check angles 16:57:35 SkyScan query 16:57:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:57:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:57:35 Message to Master queued w/err=0: serial=227914 error=0 16:57:40 Received message from Master: op=Filter serial=227915 16:57:40 Color wheel filter change from 0 to 0 16:57:40 FLIGetFilterPos err=0 currentPosition=0 16:57:40 FLIGetStepsRemaining err=0 RemainingSteps=0 16:57:40 Filter is already there-color wheel unchanged 16:57:40 Received message from Master: op=Shutter serial=227916 16:57:40 Shutter LASER close 16:57:40 Received message from Camera: op=State serial=227918 16:57:40 GetSingleValue result=40 Value=cccccccc 16:57:40 SkyScan query 16:57:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:57:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:41 Parameters OK 16:57:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:41 Set A/D data flow result=40 16:57:41 Set A/D channel type result=40 16:57:41 Set A/D encoding result=40 16:57:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:41 Set channel filter=0.000000e+000 result=40 16:57:41 Config A/D Result=40 16:57:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:41 Get A/D filter: -9.255963e+061 result=40 16:57:41 Get A/D value=-858993460 result=40 16:57:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:41 Parameters OK 16:57:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:41 Set A/D data flow result=40 16:57:41 Set A/D channel type result=40 16:57:41 Set A/D encoding result=40 16:57:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:41 Set channel filter=0.000000e+000 result=40 16:57:41 Config A/D Result=40 16:57:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:41 Get A/D filter: -9.255963e+061 result=40 16:57:41 Get A/D value=-858993460 result=40 16:57:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:57:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:57:41 Aux= 16:57:41 Message to Camera, serial 227918 queued 16:58:18 Received message from Master: op=PointingHead serial=227931 16:58:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:58:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:58:18 Point started: ret=0 16:58:18 point_skyscan result=0 16:58:19 Check angles 16:58:19 SkyScan query 16:58:20 SkyScan query done: ret=0 az=63.69<-4246 ze=66.54<-7564 Statuses=0009 0008 16:58:20 Msec=0 True Az=63.69 Ze=66.54 Az status=0009 Ze status=0008 16:58:20 Check angles 16:58:20 SkyScan query 16:58:20 SkyScan query done: ret=0 az=81.225<-5415 ze=66.51<-7566 Statuses=0009 0008 16:58:20 Msec=750 True Az=81.225 Ze=66.51 Az status=0009 Ze status=0008 16:58:20 Check angles 16:58:20 SkyScan query 16:58:21 SkyScan query done: ret=0 az=99.06<-6604 ze=66.495<-7567 Statuses=0009 0008 16:58:21 Msec=1500 True Az=99.06 Ze=66.495 Az status=0009 Ze status=0008 16:58:21 Check angles 16:58:21 SkyScan query 16:58:22 SkyScan query done: ret=0 az=116.55<-7770 ze=66.495<-7567 Statuses=0009 0008 16:58:22 Msec=2250 True Az=116.55 Ze=66.495 Az status=0009 Ze status=0008 16:58:22 Check angles 16:58:22 SkyScan query 16:58:23 SkyScan query done: ret=0 az=133.965<-8931 ze=66.495<-7567 Statuses=0009 0008 16:58:23 Msec=3000 True Az=133.965 Ze=66.495 Az status=0009 Ze status=0008 16:58:23 Check angles 16:58:23 SkyScan query 16:58:23 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 16:58:23 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 16:58:24 Check angles 16:58:24 SkyScan query 16:58:24 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:58:24 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:58:24 Message to Master queued w/err=0: serial=227931 error=0 16:58:29 Received message from Master: op=Filter serial=227932 16:58:29 Color wheel filter change from 0 to 0 16:58:29 FLIGetFilterPos err=0 currentPosition=0 16:58:29 FLIGetStepsRemaining err=0 RemainingSteps=0 16:58:29 Filter is already there-color wheel unchanged 16:58:29 Received message from Master: op=Shutter serial=227933 16:58:29 Shutter LASER close 16:58:29 Received message from Camera: op=State serial=227935 16:58:29 GetSingleValue result=40 Value=cccccccc 16:58:29 SkyScan query 16:58:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:58:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:30 Parameters OK 16:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:30 Set A/D data flow result=40 16:58:30 Set A/D channel type result=40 16:58:30 Set A/D encoding result=40 16:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:30 Set channel filter=0.000000e+000 result=40 16:58:30 Config A/D Result=40 16:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:30 Get A/D filter: -9.255963e+061 result=40 16:58:30 Get A/D value=-858993460 result=40 16:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:30 Parameters OK 16:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:30 Set A/D data flow result=40 16:58:30 Set A/D channel type result=40 16:58:30 Set A/D encoding result=40 16:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:30 Set channel filter=0.000000e+000 result=40 16:58:30 Config A/D Result=40 16:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:30 Get A/D filter: -9.255963e+061 result=40 16:58:30 Get A/D value=-858993460 result=40 16:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:58:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:58:30 Aux= 16:58:30 Message to Camera, serial 227935 queued 16:59:07 Received message from Master: op=PointingHead serial=227948 16:59:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:59:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:59:07 Point started: ret=0 16:59:07 point_skyscan result=0 16:59:08 Check angles 16:59:08 SkyScan query 16:59:08 SkyScan query done: ret=0 az=134.82<-8988 ze=36.75<-9550 Statuses=0009 0009 16:59:08 Msec=0 True Az=134.82 Ze=36.75 Az status=0009 Ze status=0009 16:59:09 Check angles 16:59:09 SkyScan query 16:59:09 SkyScan query done: ret=0 az=117.015<-7801 ze=15.36<-10976 Statuses=0009 0009 16:59:09 Msec=750 True Az=117.015 Ze=15.36 Az status=0009 Ze status=0009 16:59:09 Check angles 16:59:09 SkyScan query 16:59:10 SkyScan query done: ret=0 az=99.615<-6641 ze=-5.7<-12380 Statuses=0009 0009 16:59:10 Msec=1500 True Az=99.615 Ze=-5.7 Az status=0009 Ze status=0009 16:59:10 Check angles 16:59:10 SkyScan query 16:59:11 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.64<-13776 Statuses=0009 0009 16:59:11 Msec=2250 True Az=82.155 Ze=-26.64 Az status=0009 Ze status=0009 16:59:11 Check angles 16:59:11 SkyScan query 16:59:11 SkyScan query done: ret=0 az=64.275<-4285 ze=-38.58<-14572 Statuses=0009 0008 16:59:11 Msec=3000 True Az=64.275 Ze=-38.58 Az status=0009 Ze status=0008 16:59:12 Check angles 16:59:12 SkyScan query 16:59:12 SkyScan query done: ret=0 az=46.47<-3098 ze=-38.52<-14568 Statuses=0009 0008 16:59:12 Msec=3750 True Az=46.47 Ze=-38.52 Az status=0009 Ze status=0008 16:59:12 Check angles 16:59:12 SkyScan query 16:59:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:59:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:59:13 Message to Master queued w/err=0: serial=227948 error=0 16:59:18 Received message from Master: op=Filter serial=227949 16:59:18 Color wheel filter change from 0 to 0 16:59:18 FLIGetFilterPos err=0 currentPosition=0 16:59:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:59:18 Filter is already there-color wheel unchanged 16:59:18 Received message from Master: op=Shutter serial=227950 16:59:18 Shutter LASER close 16:59:18 Received message from Camera: op=State serial=227952 16:59:18 GetSingleValue result=40 Value=cccccccc 16:59:18 SkyScan query 16:59:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:59:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:19 Parameters OK 16:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:19 Set A/D data flow result=40 16:59:19 Set A/D channel type result=40 16:59:19 Set A/D encoding result=40 16:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:19 Set channel filter=0.000000e+000 result=40 16:59:19 Config A/D Result=40 16:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:19 Get A/D filter: -9.255963e+061 result=40 16:59:19 Get A/D value=-858993460 result=40 16:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:19 Parameters OK 16:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:19 Set A/D data flow result=40 16:59:19 Set A/D channel type result=40 16:59:19 Set A/D encoding result=40 16:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:19 Set channel filter=0.000000e+000 result=40 16:59:19 Config A/D Result=40 16:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:19 Get A/D filter: -9.255963e+061 result=40 16:59:19 Get A/D value=-858993460 result=40 16:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:59:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:59:19 Aux= 16:59:19 Message to Camera, serial 227952 queued 16:59:56 Received message from Master: op=PointingHead serial=227965 16:59:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:59:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:59:56 Point started: ret=0 16:59:56 point_skyscan result=0 16:59:57 Check angles 16:59:57 SkyScan query 16:59:57 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.805<-16587 Statuses=0009 0009 16:59:57 Msec=0 True Az=64.395 Ze=-68.805 Az status=0009 Ze status=0009 16:59:57 Check angles 16:59:57 SkyScan query 16:59:58 SkyScan query done: ret=0 az=81.93<-5462 ze=-89.775<-17985 Statuses=0009 0009 16:59:58 Msec=750 True Az=81.93 Ze=-89.775 Az status=0009 Ze status=0009 16:59:58 Check angles 16:59:58 SkyScan query 16:59:59 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.745<-19383 Statuses=0009 0009 16:59:59 Msec=1500 True Az=99.36 Ze=-110.745 Az status=0009 Ze status=0009 16:59:59 Check angles 16:59:59 SkyScan query 17:00:00 SkyScan query done: ret=0 az=117.225<-7815 ze=-132.075<-20805 Statuses=0009 0009 17:00:00 Msec=2250 True Az=117.225 Ze=-132.075 Az status=0009 Ze status=0009 17:00:00 Check angles 17:00:00 SkyScan query 17:00:00 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.555<-21437 Statuses=0009 0008 17:00:00 Msec=3000 True Az=131.04 Ze=-141.555 Az status=0009 Ze status=0008 17:00:01 Check angles 17:00:01 SkyScan query 17:00:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 17:00:01 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 17:00:01 Message to Master queued w/err=0: serial=227965 error=0 17:00:06 Received message from Master: op=Filter serial=227966 17:00:06 Color wheel filter change from 0 to 0 17:00:06 FLIGetFilterPos err=0 currentPosition=0 17:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:06 Filter is already there-color wheel unchanged 17:00:06 Received message from Master: op=Shutter serial=227967 17:00:06 Shutter LASER close 17:00:06 Received message from Camera: op=State serial=227969 17:00:06 GetSingleValue result=40 Value=cccccccc 17:00:06 SkyScan query 17:00:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:07 Parameters OK 17:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:07 Set A/D data flow result=40 17:00:07 Set A/D channel type result=40 17:00:07 Set A/D encoding result=40 17:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:07 Set channel filter=0.000000e+000 result=40 17:00:07 Config A/D Result=40 17:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:07 Get A/D filter: -9.255963e+061 result=40 17:00:07 Get A/D value=-858993460 result=40 17:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:07 Parameters OK 17:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:07 Set A/D data flow result=40 17:00:07 Set A/D channel type result=40 17:00:07 Set A/D encoding result=40 17:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:07 Set channel filter=0.000000e+000 result=40 17:00:07 Config A/D Result=40 17:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:07 Get A/D filter: -9.255963e+061 result=40 17:00:07 Get A/D value=-858993460 result=40 17:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:07 Aux= 17:00:07 Message to Camera, serial 227969 queued 17:00:44 Received message from Master: op=PointingHead serial=227982 17:00:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:00:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:00:44 Point started: ret=0 17:00:44 point_skyscan result=0 17:00:45 Check angles 17:00:45 SkyScan query 17:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.285<-23419 Statuses=0009 0009 17:00:45 Msec=0 True Az=112.995 Ze=-171.285 Az status=0009 Ze status=0009 17:00:46 Check angles 17:00:46 SkyScan query 17:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:00:46 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:00:46 Message to Master queued w/err=0: serial=227982 error=0 17:00:51 Received message from Master: op=Filter serial=227983 17:00:51 Color wheel filter change from 0 to 0 17:00:51 FLIGetFilterPos err=0 currentPosition=0 17:00:51 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:51 Filter is already there-color wheel unchanged 17:00:51 Received message from Master: op=Shutter serial=227984 17:00:51 Shutter LASER open 17:00:52 Received message from Camera: op=State serial=227986 17:00:52 GetSingleValue result=40 Value=cccccccc 17:00:52 SkyScan query 17:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:00:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:52 Parameters OK 17:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:52 Set A/D data flow result=40 17:00:52 Set A/D channel type result=40 17:00:52 Set A/D encoding result=40 17:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:52 Set channel filter=0.000000e+000 result=40 17:00:52 Config A/D Result=40 17:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:52 Get A/D filter: -9.255963e+061 result=40 17:00:52 Get A/D value=-858993460 result=40 17:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:52 Parameters OK 17:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:52 Set A/D data flow result=40 17:00:52 Set A/D channel type result=40 17:00:52 Set A/D encoding result=40 17:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:52 Set channel filter=0.000000e+000 result=40 17:00:52 Config A/D Result=40 17:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:52 Get A/D filter: -9.255963e+061 result=40 17:00:52 Get A/D value=-858993460 result=40 17:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:52 Aux= 17:00:52 Message to Camera, serial 227986 queued 17:01:01 Received message from Master: op=Shutter serial=227996 17:01:01 Shutter LASER close 17:01:01 Received message from Master: op=PointingHead serial=228000 17:01:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:01:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:01:01 Point started: ret=0 17:01:01 point_skyscan result=0 17:01:02 Check angles 17:01:02 SkyScan query 17:01:03 SkyScan query done: ret=0 az=136.455<-9097 ze=-142.755<-21517 Statuses=0009 0009 17:01:03 Msec=0 True Az=136.455 Ze=-142.755 Az status=0009 Ze status=0009 17:01:03 Check angles 17:01:03 SkyScan query 17:01:04 SkyScan query done: ret=0 az=153.93<-10262 ze=-121.785<-20119 Statuses=0009 0009 17:01:04 Msec=750 True Az=153.93 Ze=-121.785 Az status=0009 Ze status=0009 17:01:04 Check angles 17:01:04 SkyScan query 17:01:04 SkyScan query done: ret=0 az=171.825<-11455 ze=-100.335<-18689 Statuses=0009 0009 17:01:04 Msec=1500 True Az=171.825 Ze=-100.335 Az status=0009 Ze status=0009 17:01:05 Check angles 17:01:05 SkyScan query 17:01:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.395<-17293 Statuses=0008 0009 17:01:05 Msec=2250 True Az=175.995 Ze=-79.395 Az status=0008 Ze status=0009 17:01:05 Check angles 17:01:05 SkyScan query 17:01:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.425<-15895 Statuses=0008 0009 17:01:06 Msec=3000 True Az=175.995 Ze=-58.425 Az status=0008 Ze status=0009 17:01:06 Check angles 17:01:06 SkyScan query 17:01:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:01:07 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:01:07 Message to Master queued w/err=0: serial=228000 error=0 17:01:12 Received message from Master: op=Filter serial=228001 17:01:12 Color wheel filter change from 0 to 0 17:01:12 FLIGetFilterPos err=0 currentPosition=0 17:01:12 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:12 Filter is already there-color wheel unchanged 17:01:12 Received message from Master: op=Shutter serial=228002 17:01:12 Shutter LASER close 17:01:12 Received message from Camera: op=State serial=228004 17:01:12 GetSingleValue result=40 Value=cccccccc 17:01:12 SkyScan query 17:01:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:01:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:13 Parameters OK 17:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:13 Set A/D data flow result=40 17:01:13 Set A/D channel type result=40 17:01:13 Set A/D encoding result=40 17:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:13 Set channel filter=0.000000e+000 result=40 17:01:13 Config A/D Result=40 17:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:13 Get A/D filter: -9.255963e+061 result=40 17:01:13 Get A/D value=-858993460 result=40 17:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:13 Parameters OK 17:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:13 Set A/D data flow result=40 17:01:13 Set A/D channel type result=40 17:01:13 Set A/D encoding result=40 17:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:13 Set channel filter=0.000000e+000 result=40 17:01:13 Config A/D Result=40 17:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:13 Get A/D filter: -9.255963e+061 result=40 17:01:13 Get A/D value=-858993460 result=40 17:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:01:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:01:13 Aux= 17:01:13 Message to Camera, serial 228004 queued 17:01:48 Received message from Master: op=PointingHead serial=228016 17:01:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:01:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:01:49 Point started: ret=0 17:01:49 point_skyscan result=0 17:01:50 Check angles 17:01:50 SkyScan query 17:01:50 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.3<-13420 Statuses=0009 0009 17:01:50 Msec=0 True Az=152.73 Ze=-21.3 Az status=0009 Ze status=0009 17:01:50 Check angles 17:01:50 SkyScan query 17:01:51 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.345<-12023 Statuses=0009 0009 17:01:51 Msec=750 True Az=135.135 Ze=-0.345 Az status=0009 Ze status=0009 17:01:51 Check angles 17:01:51 SkyScan query 17:01:52 SkyScan query done: ret=0 az=117.645<-7843 ze=20.625<-10625 Statuses=0009 0009 17:01:52 Msec=1500 True Az=117.645 Ze=20.625 Az status=0009 Ze status=0009 17:01:52 Check angles 17:01:52 SkyScan query 17:01:52 SkyScan query done: ret=0 az=100.275<-6685 ze=41.58<-9228 Statuses=0009 0009 17:01:52 Msec=2250 True Az=100.275 Ze=41.58 Az status=0009 Ze status=0009 17:01:53 Check angles 17:01:53 SkyScan query 17:01:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 17:01:53 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 17:01:53 Check angles 17:01:53 SkyScan query 17:01:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.525<-8565 Statuses=0008 0008 17:01:54 Msec=3750 True Az=85.995 Ze=51.525 Az status=0008 Ze status=0008 17:01:54 Message to Master queued w/err=0: serial=228016 error=0 17:01:59 Received message from Master: op=Filter serial=228017 17:01:59 Color wheel filter change from 0 to 0 17:01:59 FLIGetFilterPos err=0 currentPosition=0 17:01:59 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:59 Filter is already there-color wheel unchanged 17:01:59 Received message from Master: op=Shutter serial=228018 17:01:59 Shutter LASER close 17:01:59 Received message from Camera: op=State serial=228020 17:01:59 GetSingleValue result=40 Value=cccccccc 17:01:59 SkyScan query 17:02:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:02:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:00 Parameters OK 17:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:00 Set A/D data flow result=40 17:02:00 Set A/D channel type result=40 17:02:00 Set A/D encoding result=40 17:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:00 Set channel filter=0.000000e+000 result=40 17:02:00 Config A/D Result=40 17:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:00 Get A/D filter: -9.255963e+061 result=40 17:02:00 Get A/D value=-858993460 result=40 17:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:00 Parameters OK 17:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:00 Set A/D data flow result=40 17:02:00 Set A/D channel type result=40 17:02:00 Set A/D encoding result=40 17:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:00 Set channel filter=0.000000e+000 result=40 17:02:00 Config A/D Result=40 17:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:00 Get A/D filter: -9.255963e+061 result=40 17:02:00 Get A/D value=-858993460 result=40 17:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:00 Aux= 17:02:00 Message to Camera, serial 228020 queued 17:02:37 Received message from Master: op=PointingHead serial=228033 17:02:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:02:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:02:37 Point started: ret=0 17:02:37 point_skyscan result=0 17:02:38 Check angles 17:02:38 SkyScan query 17:02:38 SkyScan query done: ret=0 az=109.155<-7277 ze=38.475<-9435 Statuses=0009 0008 17:02:38 Msec=0 True Az=109.155 Ze=38.475 Az status=0009 Ze status=0008 17:02:38 Check angles 17:02:38 SkyScan query 17:02:39 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 17:02:39 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 17:02:39 Check angles 17:02:39 SkyScan query 17:02:40 SkyScan query done: ret=0 az=144.06<-9604 ze=38.505<-9433 Statuses=0009 0008 17:02:40 Msec=1500 True Az=144.06 Ze=38.505 Az status=0009 Ze status=0008 17:02:40 Check angles 17:02:40 SkyScan query 17:02:40 SkyScan query done: ret=0 az=161.835<-10789 ze=38.505<-9433 Statuses=0009 0008 17:02:40 Msec=2250 True Az=161.835 Ze=38.505 Az status=0009 Ze status=0008 17:02:41 Check angles 17:02:41 SkyScan query 17:02:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 17:02:41 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 17:02:41 Check angles 17:02:41 SkyScan query 17:02:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:02:42 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:02:42 Message to Master queued w/err=0: serial=228033 error=0 17:02:47 Received message from Master: op=Filter serial=228034 17:02:47 Color wheel filter change from 0 to 0 17:02:47 FLIGetFilterPos err=0 currentPosition=0 17:02:47 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:47 Filter is already there-color wheel unchanged 17:02:47 Received message from Master: op=Shutter serial=228035 17:02:47 Shutter LASER close 17:02:47 Received message from Camera: op=State serial=228037 17:02:47 GetSingleValue result=40 Value=cccccccc 17:02:47 SkyScan query 17:02:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:02:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:48 Parameters OK 17:02:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:48 Set A/D data flow result=40 17:02:48 Set A/D channel type result=40 17:02:48 Set A/D encoding result=40 17:02:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:48 Set channel filter=0.000000e+000 result=40 17:02:48 Config A/D Result=40 17:02:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:48 Get A/D filter: -9.255963e+061 result=40 17:02:48 Get A/D value=-858993460 result=40 17:02:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:48 Parameters OK 17:02:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:48 Set A/D data flow result=40 17:02:48 Set A/D channel type result=40 17:02:48 Set A/D encoding result=40 17:02:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:48 Set channel filter=0.000000e+000 result=40 17:02:48 Config A/D Result=40 17:02:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:48 Get A/D filter: -9.255963e+061 result=40 17:02:48 Get A/D value=-858993460 result=40 17:02:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:48 Aux= 17:02:48 Message to Camera, serial 228037 queued 17:03:25 Received message from Master: op=PointingHead serial=228050 17:03:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:03:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:03:25 Point started: ret=0 17:03:25 point_skyscan result=0 17:03:26 Check angles 17:03:26 SkyScan query 17:03:26 SkyScan query done: ret=0 az=152.94<-10196 ze=8.775<-11415 Statuses=0009 0009 17:03:26 Msec=0 True Az=152.94 Ze=8.775 Az status=0009 Ze status=0009 17:03:26 Check angles 17:03:26 SkyScan query 17:03:27 SkyScan query done: ret=0 az=135.63<-9042 ze=-12.195<-12813 Statuses=0009 0009 17:03:27 Msec=750 True Az=135.63 Ze=-12.195 Az status=0009 Ze status=0009 17:03:27 Check angles 17:03:27 SkyScan query 17:03:28 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.12<-14208 Statuses=0009 0009 17:03:28 Msec=1500 True Az=118.08 Ze=-33.12 Az status=0009 Ze status=0009 17:03:28 Check angles 17:03:28 SkyScan query 17:03:28 SkyScan query done: ret=0 az=100.71<-6714 ze=-51.54<-15436 Statuses=0009 0009 17:03:28 Msec=2250 True Az=100.71 Ze=-51.54 Az status=0009 Ze status=0009 17:03:29 Check angles 17:03:29 SkyScan query 17:03:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 17:03:29 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 17:03:29 Check angles 17:03:29 SkyScan query 17:03:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:03:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:03:30 Message to Master queued w/err=0: serial=228050 error=0 17:03:35 Received message from Master: op=Filter serial=228051 17:03:35 Color wheel filter change from 0 to 0 17:03:35 FLIGetFilterPos err=0 currentPosition=0 17:03:35 FLIGetStepsRemaining err=0 RemainingSteps=0 17:03:35 Filter is already there-color wheel unchanged 17:03:35 Received message from Master: op=Shutter serial=228052 17:03:35 Shutter LASER close 17:03:35 Received message from Camera: op=State serial=228054 17:03:35 GetSingleValue result=40 Value=cccccccc 17:03:35 SkyScan query 17:03:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:03:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:36 Parameters OK 17:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:36 Set A/D data flow result=40 17:03:36 Set A/D channel type result=40 17:03:36 Set A/D encoding result=40 17:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:36 Set channel filter=0.000000e+000 result=40 17:03:36 Config A/D Result=40 17:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:36 Get A/D filter: -9.255963e+061 result=40 17:03:36 Get A/D value=-858993460 result=40 17:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:36 Parameters OK 17:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:36 Set A/D data flow result=40 17:03:36 Set A/D channel type result=40 17:03:36 Set A/D encoding result=40 17:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:36 Set channel filter=0.000000e+000 result=40 17:03:36 Config A/D Result=40 17:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:36 Get A/D filter: -9.255963e+061 result=40 17:03:36 Get A/D value=-858993460 result=40 17:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:03:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:03:36 Aux= 17:03:36 Message to Camera, serial 228054 queued 17:04:13 Received message from Master: op=PointingHead serial=228067 17:04:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:04:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:04:13 Point started: ret=0 17:04:13 point_skyscan result=0 17:04:14 Check angles 17:04:14 SkyScan query 17:04:14 SkyScan query done: ret=0 az=108.78<-7252 ze=-80.955<-17397 Statuses=0009 0009 17:04:14 Msec=0 True Az=108.78 Ze=-80.955 Az status=0009 Ze status=0009 17:04:14 Check angles 17:04:14 SkyScan query 17:04:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.94<-18796 Statuses=0008 0009 17:04:15 Msec=750 True Az=112.995 Ze=-101.94 Az status=0008 Ze status=0009 17:04:15 Check angles 17:04:15 SkyScan query 17:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.88<-20192 Statuses=0008 0009 17:04:16 Msec=1500 True Az=112.995 Ze=-122.88 Az status=0008 Ze status=0009 17:04:16 Check angles 17:04:16 SkyScan query 17:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.835<-21589 Statuses=0008 0009 17:04:17 Msec=2250 True Az=112.995 Ze=-143.835 Az status=0008 Ze status=0009 17:04:17 Check angles 17:04:17 SkyScan query 17:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.82<-22988 Statuses=0008 0009 17:04:17 Msec=3000 True Az=112.995 Ze=-164.82 Az status=0008 Ze status=0009 17:04:17 Check angles 17:04:17 SkyScan query 17:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:04:18 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:04:18 Message to Master queued w/err=0: serial=228067 error=0 17:04:23 Received message from Master: op=Filter serial=228068 17:04:23 Color wheel filter change from 0 to 0 17:04:23 FLIGetFilterPos err=0 currentPosition=0 17:04:23 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:23 Filter is already there-color wheel unchanged 17:04:23 Received message from Master: op=Shutter serial=228069 17:04:23 Shutter LASER open 17:04:23 Received message from Camera: op=State serial=228071 17:04:23 GetSingleValue result=40 Value=cccccccc 17:04:23 SkyScan query 17:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:04:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:24 Parameters OK 17:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:24 Set A/D data flow result=40 17:04:24 Set A/D channel type result=40 17:04:24 Set A/D encoding result=40 17:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:24 Set channel filter=0.000000e+000 result=40 17:04:24 Config A/D Result=40 17:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:24 Get A/D filter: -9.255963e+061 result=40 17:04:24 Get A/D value=-858993460 result=40 17:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:24 Parameters OK 17:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:24 Set A/D data flow result=40 17:04:24 Set A/D channel type result=40 17:04:24 Set A/D encoding result=40 17:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:24 Set channel filter=0.000000e+000 result=40 17:04:24 Config A/D Result=40 17:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:24 Get A/D filter: -9.255963e+061 result=40 17:04:24 Get A/D value=-858993460 result=40 17:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:24 Aux= 17:04:24 Message to Camera, serial 228071 queued 17:04:32 Received message from Master: op=Shutter serial=228081 17:04:32 Shutter LASER close 17:04:33 Received message from Master: op=PointingHead serial=228085 17:04:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:04:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:04:33 Point started: ret=0 17:04:33 point_skyscan result=0 17:04:34 Check angles 17:04:34 SkyScan query 17:04:34 SkyScan query done: ret=0 az=89.625<-5975 ze=157.005<-1533 Statuses=0009 0009 17:04:34 Msec=0 True Az=89.625 Ze=157.005 Az status=0009 Ze status=0009 17:04:35 Check angles 17:04:35 SkyScan query 17:04:35 SkyScan query done: ret=0 az=72.03<-4802 ze=136.08<-2928 Statuses=0009 0009 17:04:35 Msec=750 True Az=72.03 Ze=136.08 Az status=0009 Ze status=0009 17:04:35 Check angles 17:04:35 SkyScan query 17:04:36 SkyScan query done: ret=0 az=54.69<-3646 ze=115.095<-4327 Statuses=0009 0009 17:04:36 Msec=1500 True Az=54.69 Ze=115.095 Az status=0009 Ze status=0009 17:04:36 Check angles 17:04:36 SkyScan query 17:04:37 SkyScan query done: ret=0 az=40.995<-2733 ze=94.125<-5725 Statuses=0009 0009 17:04:37 Msec=2250 True Az=40.995 Ze=94.125 Az status=0009 Ze status=0009 17:04:37 Check angles 17:04:37 SkyScan query 17:04:37 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 17:04:37 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 17:04:38 Check angles 17:04:38 SkyScan query 17:04:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 17:04:38 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 17:04:38 Check angles 17:04:38 SkyScan query 17:04:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:04:39 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:04:39 Message to Master queued w/err=0: serial=228085 error=0 17:04:44 Received message from Master: op=Filter serial=228086 17:04:44 Color wheel filter change from 0 to 0 17:04:44 FLIGetFilterPos err=0 currentPosition=0 17:04:44 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:44 Filter is already there-color wheel unchanged 17:04:44 Received message from Master: op=Shutter serial=228087 17:04:44 Shutter LASER close 17:04:44 Received message from Camera: op=State serial=228089 17:04:44 GetSingleValue result=40 Value=cccccccc 17:04:44 SkyScan query 17:04:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:04:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:45 Parameters OK 17:04:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:45 Set A/D data flow result=40 17:04:45 Set A/D channel type result=40 17:04:45 Set A/D encoding result=40 17:04:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:45 Set channel filter=0.000000e+000 result=40 17:04:45 Config A/D Result=40 17:04:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:45 Get A/D filter: -9.255963e+061 result=40 17:04:45 Get A/D value=-858993460 result=40 17:04:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:45 Parameters OK 17:04:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:45 Set A/D data flow result=40 17:04:45 Set A/D channel type result=40 17:04:45 Set A/D encoding result=40 17:04:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:45 Set channel filter=0.000000e+000 result=40 17:04:45 Config A/D Result=40 17:04:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:45 Get A/D filter: -9.255963e+061 result=40 17:04:45 Get A/D value=-858993460 result=40 17:04:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:45 Aux= 17:04:45 Message to Camera, serial 228089 queued 17:05:22 Received message from Master: op=PointingHead serial=228102 17:05:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:05:22 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:05:22 Point started: ret=0 17:05:22 point_skyscan result=0 17:05:23 Check angles 17:05:23 SkyScan query 17:05:23 SkyScan query done: ret=0 az=64.59<-4306 ze=66.54<-7564 Statuses=0009 0008 17:05:23 Msec=0 True Az=64.59 Ze=66.54 Az status=0009 Ze status=0008 17:05:24 Check angles 17:05:24 SkyScan query 17:05:24 SkyScan query done: ret=0 az=82.56<-5504 ze=66.51<-7566 Statuses=0009 0008 17:05:24 Msec=750 True Az=82.56 Ze=66.51 Az status=0009 Ze status=0008 17:05:24 Check angles 17:05:24 SkyScan query 17:05:25 SkyScan query done: ret=0 az=99.99<-6666 ze=66.495<-7567 Statuses=0009 0008 17:05:25 Msec=1500 True Az=99.99 Ze=66.495 Az status=0009 Ze status=0008 17:05:25 Check angles 17:05:25 SkyScan query 17:05:26 SkyScan query done: ret=0 az=117.9<-7860 ze=66.495<-7567 Statuses=0009 0008 17:05:26 Msec=2250 True Az=117.9 Ze=66.495 Az status=0009 Ze status=0008 17:05:26 Check angles 17:05:26 SkyScan query 17:05:26 SkyScan query done: ret=0 az=135.63<-9042 ze=66.495<-7567 Statuses=0009 0008 17:05:26 Msec=3000 True Az=135.63 Ze=66.495 Az status=0009 Ze status=0008 17:05:27 Check angles 17:05:27 SkyScan query 17:05:27 SkyScan query done: ret=0 az=153.36<-10224 ze=66.495<-7567 Statuses=0009 0008 17:05:27 Msec=3750 True Az=153.36 Ze=66.495 Az status=0009 Ze status=0008 17:05:27 Check angles 17:05:27 SkyScan query 17:05:28 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:05:28 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:05:28 Message to Master queued w/err=0: serial=228102 error=0 17:05:33 Received message from Master: op=Filter serial=228103 17:05:33 Color wheel filter change from 0 to 0 17:05:33 FLIGetFilterPos err=0 currentPosition=0 17:05:33 FLIGetStepsRemaining err=0 RemainingSteps=0 17:05:33 Filter is already there-color wheel unchanged 17:05:33 Received message from Master: op=Shutter serial=228104 17:05:33 Shutter LASER close 17:05:33 Received message from Camera: op=State serial=228106 17:05:33 GetSingleValue result=40 Value=cccccccc 17:05:33 SkyScan query 17:05:34 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:05:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:34 Parameters OK 17:05:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:34 Set A/D data flow result=40 17:05:34 Set A/D channel type result=40 17:05:34 Set A/D encoding result=40 17:05:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:34 Set channel filter=0.000000e+000 result=40 17:05:34 Config A/D Result=40 17:05:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:34 Get A/D filter: -9.255963e+061 result=40 17:05:34 Get A/D value=-858993460 result=40 17:05:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:34 Parameters OK 17:05:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:34 Set A/D data flow result=40 17:05:34 Set A/D channel type result=40 17:05:34 Set A/D encoding result=40 17:05:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:34 Set channel filter=0.000000e+000 result=40 17:05:34 Config A/D Result=40 17:05:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:34 Get A/D filter: -9.255963e+061 result=40 17:05:34 Get A/D value=-858993460 result=40 [UTC 2018-12-17 17:05:34] 17:05:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:05:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:05:34 Aux= 17:05:34 Message to Camera, serial 228106 queued 17:06:10 Received message from Master: op=PointingHead serial=228118 17:06:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:06:10 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:06:10 Point started: ret=0 17:06:10 point_skyscan result=0 17:06:11 Check angles 17:06:11 SkyScan query 17:06:11 SkyScan query done: ret=0 az=134.565<-8971 ze=36.255<-9583 Statuses=0009 0009 17:06:11 Msec=0 True Az=134.565 Ze=36.255 Az status=0009 Ze status=0009 17:06:12 Check angles 17:06:12 SkyScan query 17:06:12 SkyScan query done: ret=0 az=117.105<-7807 ze=15.345<-10977 Statuses=0009 0009 17:06:12 Msec=750 True Az=117.105 Ze=15.345 Az status=0009 Ze status=0009 17:06:12 Check angles 17:06:12 SkyScan query 17:06:13 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.7<-12380 Statuses=0009 0009 17:06:13 Msec=1500 True Az=99.81 Ze=-5.7 Az status=0009 Ze status=0009 17:06:13 Check angles 17:06:13 SkyScan query 17:06:14 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.64<-13776 Statuses=0009 0009 17:06:14 Msec=2250 True Az=82.245 Ze=-26.64 Az status=0009 Ze status=0009 17:06:14 Check angles 17:06:14 SkyScan query 17:06:14 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.58<-14572 Statuses=0009 0008 17:06:14 Msec=3000 True Az=64.68 Ze=-38.58 Az status=0009 Ze status=0008 17:06:15 Check angles 17:06:15 SkyScan query 17:06:15 SkyScan query done: ret=0 az=47.25<-3150 ze=-38.52<-14568 Statuses=0009 0008 17:06:15 Msec=3750 True Az=47.25 Ze=-38.52 Az status=0009 Ze status=0008 17:06:15 Check angles 17:06:15 SkyScan query 17:06:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:06:16 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:06:16 Message to Master queued w/err=0: serial=228118 error=0 17:06:21 Received message from Master: op=Filter serial=228119 17:06:21 Color wheel filter change from 0 to 0 17:06:21 FLIGetFilterPos err=0 currentPosition=0 17:06:21 FLIGetStepsRemaining err=0 RemainingSteps=0 17:06:21 Filter is already there-color wheel unchanged 17:06:21 Received message from Master: op=Shutter serial=228120 17:06:21 Shutter LASER close 17:06:21 Received message from Camera: op=State serial=228122 17:06:21 GetSingleValue result=40 Value=cccccccc 17:06:21 SkyScan query 17:06:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:06:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:22 Parameters OK 17:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:22 Set A/D data flow result=40 17:06:22 Set A/D channel type result=40 17:06:22 Set A/D encoding result=40 17:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:22 Set channel filter=0.000000e+000 result=40 17:06:22 Config A/D Result=40 17:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:22 Get A/D filter: -9.255963e+061 result=40 17:06:22 Get A/D value=-858993460 result=40 17:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:22 Parameters OK 17:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:22 Set A/D data flow result=40 17:06:22 Set A/D channel type result=40 17:06:22 Set A/D encoding result=40 17:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:22 Set channel filter=0.000000e+000 result=40 17:06:22 Config A/D Result=40 17:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:22 Get A/D filter: -9.255963e+061 result=40 17:06:22 Get A/D value=-858993460 result=40 17:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:06:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:06:22 Aux= 17:06:22 Message to Camera, serial 228122 queued 17:06:58 Received message from Master: op=PointingHead serial=228134 17:06:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:06:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:06:58 Point started: ret=0 17:06:58 point_skyscan result=0 17:06:59 Check angles 17:06:59 SkyScan query 17:06:59 SkyScan query done: ret=0 az=64.35<-4290 ze=-68.67<-16578 Statuses=0009 0009 17:06:59 Msec=0 True Az=64.35 Ze=-68.67 Az status=0009 Ze status=0009 17:06:59 Check angles 17:06:59 SkyScan query 17:07:00 SkyScan query done: ret=0 az=81.795<-5453 ze=-89.655<-17977 Statuses=0009 0009 17:07:00 Msec=750 True Az=81.795 Ze=-89.655 Az status=0009 Ze status=0009 17:07:00 Check angles 17:07:00 SkyScan query 17:07:01 SkyScan query done: ret=0 az=99.3<-6620 ze=-110.64<-19376 Statuses=0009 0009 17:07:01 Msec=1500 True Az=99.3 Ze=-110.64 Az status=0009 Ze status=0009 17:07:01 Check angles 17:07:01 SkyScan query 17:07:02 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.535<-20769 Statuses=0009 0009 17:07:02 Msec=2250 True Az=116.715 Ze=-131.535 Az status=0009 Ze status=0009 17:07:02 Check angles 17:07:02 SkyScan query 17:07:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.555<-21437 Statuses=0009 0008 17:07:02 Msec=3000 True Az=131.01 Ze=-141.555 Az status=0009 Ze status=0008 17:07:02 Check angles 17:07:02 SkyScan query 17:07:03 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 17:07:03 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 17:07:03 Message to Master queued w/err=0: serial=228134 error=0 17:07:08 Received message from Master: op=Filter serial=228135 17:07:08 Color wheel filter change from 0 to 0 17:07:08 FLIGetFilterPos err=0 currentPosition=0 17:07:08 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:08 Filter is already there-color wheel unchanged 17:07:08 Received message from Master: op=Shutter serial=228136 17:07:08 Shutter LASER close 17:07:08 Received message from Camera: op=State serial=228138 17:07:08 GetSingleValue result=40 Value=cccccccc 17:07:08 SkyScan query 17:07:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:07:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:09 Parameters OK 17:07:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:09 Set A/D data flow result=40 17:07:09 Set A/D channel type result=40 17:07:09 Set A/D encoding result=40 17:07:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:09 Set channel filter=0.000000e+000 result=40 17:07:09 Config A/D Result=40 17:07:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:09 Get A/D filter: -9.255963e+061 result=40 17:07:09 Get A/D value=-858993460 result=40 17:07:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:09 Parameters OK 17:07:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:09 Set A/D data flow result=40 17:07:09 Set A/D channel type result=40 17:07:09 Set A/D encoding result=40 17:07:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:09 Set channel filter=0.000000e+000 result=40 17:07:09 Config A/D Result=40 17:07:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:09 Get A/D filter: -9.255963e+061 result=40 17:07:09 Get A/D value=-858993460 result=40 17:07:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:09 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:09 Aux= 17:07:09 Message to Camera, serial 228138 queued 17:07:46 Received message from Master: op=PointingHead serial=228151 17:07:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:07:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:07:46 Point started: ret=0 17:07:46 point_skyscan result=0 17:07:47 Check angles 17:07:47 SkyScan query 17:07:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 17:07:47 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 17:07:47 Check angles 17:07:47 SkyScan query 17:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:07:48 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:07:48 Message to Master queued w/err=0: serial=228151 error=0 17:07:53 Received message from Master: op=Filter serial=228152 17:07:53 Color wheel filter change from 0 to 0 17:07:53 FLIGetFilterPos err=0 currentPosition=0 17:07:53 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:53 Filter is already there-color wheel unchanged 17:07:53 Received message from Master: op=Shutter serial=228153 17:07:53 Shutter LASER open 17:07:53 Received message from Camera: op=State serial=228155 17:07:53 GetSingleValue result=40 Value=cccccccc 17:07:53 SkyScan query 17:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:07:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:54 Parameters OK 17:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:54 Set A/D data flow result=40 17:07:54 Set A/D channel type result=40 17:07:54 Set A/D encoding result=40 17:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:54 Set channel filter=0.000000e+000 result=40 17:07:54 Config A/D Result=40 17:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:54 Get A/D filter: -9.255963e+061 result=40 17:07:54 Get A/D value=-858993460 result=40 17:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:54 Parameters OK 17:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:54 Set A/D data flow result=40 17:07:54 Set A/D channel type result=40 17:07:54 Set A/D encoding result=40 17:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:54 Set channel filter=0.000000e+000 result=40 17:07:54 Config A/D Result=40 17:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:54 Get A/D filter: -9.255963e+061 result=40 17:07:54 Get A/D value=-858993460 result=40 17:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:54 Aux= 17:07:54 Message to Camera, serial 228155 queued 17:08:02 Received message from Master: op=Shutter serial=228165 17:08:02 Shutter LASER close 17:08:03 Received message from Master: op=PointingHead serial=228169 17:08:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:08:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:08:03 Point started: ret=0 17:08:03 point_skyscan result=0 17:08:04 Check angles 17:08:04 SkyScan query 17:08:05 SkyScan query done: ret=0 az=136.47<-9098 ze=-142.875<-21525 Statuses=0009 0009 17:08:05 Msec=0 True Az=136.47 Ze=-142.875 Az status=0009 Ze status=0009 17:08:05 Check angles 17:08:05 SkyScan query 17:08:05 SkyScan query done: ret=0 az=153.99<-10266 ze=-121.905<-20127 Statuses=0009 0009 17:08:05 Msec=750 True Az=153.99 Ze=-121.905 Az status=0009 Ze status=0009 17:08:06 Check angles 17:08:06 SkyScan query 17:08:06 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.875<-18725 Statuses=0009 0009 17:08:06 Msec=1500 True Az=171.39 Ze=-100.875 Az status=0009 Ze status=0009 17:08:06 Check angles 17:08:06 SkyScan query 17:08:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.04<-17336 Statuses=0008 0009 17:08:07 Msec=2250 True Az=175.995 Ze=-80.04 Az status=0008 Ze status=0009 17:08:07 Check angles 17:08:07 SkyScan query 17:08:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 17:08:08 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 17:08:08 Check angles 17:08:08 SkyScan query 17:08:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:08:08 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:08:08 Message to Master queued w/err=0: serial=228169 error=0 17:08:13 Received message from Master: op=Filter serial=228170 17:08:13 Color wheel filter change from 0 to 0 17:08:13 FLIGetFilterPos err=0 currentPosition=0 17:08:13 FLIGetStepsRemaining err=0 RemainingSteps=0 17:08:13 Filter is already there-color wheel unchanged 17:08:14 Received message from Master: op=Shutter serial=228171 17:08:14 Shutter LASER close 17:08:14 Received message from Camera: op=State serial=228173 17:08:14 GetSingleValue result=40 Value=cccccccc 17:08:14 SkyScan query 17:08:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:08:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:14 Parameters OK 17:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:14 Set A/D data flow result=40 17:08:14 Set A/D channel type result=40 17:08:14 Set A/D encoding result=40 17:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:14 Set channel filter=0.000000e+000 result=40 17:08:14 Config A/D Result=40 17:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:14 Get A/D filter: -9.255963e+061 result=40 17:08:14 Get A/D value=-858993460 result=40 17:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:14 Parameters OK 17:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:14 Set A/D data flow result=40 17:08:14 Set A/D channel type result=40 17:08:14 Set A/D encoding result=40 17:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:14 Set channel filter=0.000000e+000 result=40 17:08:14 Config A/D Result=40 17:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:14 Get A/D filter: -9.255963e+061 result=40 17:08:14 Get A/D value=-858993460 result=40 17:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:08:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:08:14 Aux= 17:08:14 Message to Camera, serial 228173 queued 17:08:51 Received message from Master: op=PointingHead serial=228186 17:08:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:08:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:08:52 Point started: ret=0 17:08:52 point_skyscan result=0 17:08:52 Check angles 17:08:52 SkyScan query 17:08:53 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.48<-13432 Statuses=0009 0009 17:08:53 Msec=0 True Az=152.745 Ze=-21.48 Az status=0009 Ze status=0009 17:08:53 Check angles 17:08:53 SkyScan query 17:08:54 SkyScan query done: ret=0 az=135.285<-9019 ze=-0.54<-12036 Statuses=0009 0009 17:08:54 Msec=750 True Az=135.285 Ze=-0.54 Az status=0009 Ze status=0009 17:08:54 Check angles 17:08:54 SkyScan query 17:08:54 SkyScan query done: ret=0 az=117.81<-7854 ze=20.445<-10637 Statuses=0009 0009 17:08:54 Msec=1500 True Az=117.81 Ze=20.445 Az status=0009 Ze status=0009 17:08:55 Check angles 17:08:55 SkyScan query 17:08:55 SkyScan query done: ret=0 az=100.455<-6697 ze=41.385<-9241 Statuses=0009 0009 17:08:55 Msec=2250 True Az=100.455 Ze=41.385 Az status=0009 Ze status=0009 17:08:55 Check angles 17:08:55 SkyScan query 17:08:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 17:08:56 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 17:08:56 Check angles 17:08:56 SkyScan query 17:08:57 SkyScan query done: ret=0 az=85.98<-5732 ze=51.51<-8566 Statuses=0008 0008 17:08:57 Msec=3750 True Az=85.98 Ze=51.51 Az status=0008 Ze status=0008 17:08:57 Message to Master queued w/err=0: serial=228186 error=0 17:09:02 Received message from Master: op=Filter serial=228187 17:09:02 Color wheel filter change from 0 to 0 17:09:02 FLIGetFilterPos err=0 currentPosition=0 17:09:02 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:02 Filter is already there-color wheel unchanged 17:09:02 Received message from Master: op=Shutter serial=228188 17:09:02 Shutter LASER close 17:09:02 Received message from Camera: op=State serial=228190 17:09:02 GetSingleValue result=40 Value=cccccccc 17:09:02 SkyScan query 17:09:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:09:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:02 Parameters OK 17:09:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:02 Set A/D data flow result=40 17:09:02 Set A/D channel type result=40 17:09:02 Set A/D encoding result=40 17:09:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:02 Set channel filter=0.000000e+000 result=40 17:09:02 Config A/D Result=40 17:09:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:02 Get A/D filter: -9.255963e+061 result=40 17:09:02 Get A/D value=-858993460 result=40 17:09:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:02 Parameters OK 17:09:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:02 Set A/D data flow result=40 17:09:02 Set A/D channel type result=40 17:09:02 Set A/D encoding result=40 17:09:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:02 Set channel filter=0.000000e+000 result=40 17:09:02 Config A/D Result=40 17:09:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:02 Get A/D filter: -9.255963e+061 result=40 17:09:02 Get A/D value=-858993460 result=40 17:09:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:02 Aux= 17:09:02 Message to Camera, serial 228190 queued 17:09:39 Received message from Master: op=PointingHead serial=228203 17:09:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:09:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:09:40 Point started: ret=0 17:09:40 point_skyscan result=0 17:09:40 Check angles 17:09:40 SkyScan query 17:09:41 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 17:09:41 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 17:09:41 Check angles 17:09:41 SkyScan query 17:09:42 SkyScan query done: ret=0 az=126.45<-8430 ze=38.505<-9433 Statuses=0009 0008 17:09:42 Msec=750 True Az=126.45 Ze=38.505 Az status=0009 Ze status=0008 17:09:42 Check angles 17:09:42 SkyScan query 17:09:42 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 17:09:42 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 17:09:43 Check angles 17:09:43 SkyScan query 17:09:43 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 17:09:43 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 17:09:43 Check angles 17:09:43 SkyScan query 17:09:44 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:09:44 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:09:44 Check angles 17:09:44 SkyScan query 17:09:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:09:45 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:09:45 Message to Master queued w/err=0: serial=228203 error=0 17:09:50 Received message from Master: op=Filter serial=228204 17:09:50 Color wheel filter change from 0 to 0 17:09:50 FLIGetFilterPos err=0 currentPosition=0 17:09:50 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:50 Filter is already there-color wheel unchanged 17:09:50 Received message from Master: op=Shutter serial=228205 17:09:50 Shutter LASER close 17:09:50 Received message from Camera: op=State serial=228207 17:09:50 GetSingleValue result=40 Value=cccccccc 17:09:50 SkyScan query 17:09:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:09:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:50 Parameters OK 17:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:50 Set A/D data flow result=40 17:09:50 Set A/D channel type result=40 17:09:50 Set A/D encoding result=40 17:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:50 Set channel filter=0.000000e+000 result=40 17:09:50 Config A/D Result=40 17:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:50 Get A/D filter: -9.255963e+061 result=40 17:09:50 Get A/D value=-858993460 result=40 17:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:50 Parameters OK 17:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:50 Set A/D data flow result=40 17:09:50 Set A/D channel type result=40 17:09:50 Set A/D encoding result=40 17:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:50 Set channel filter=0.000000e+000 result=40 17:09:50 Config A/D Result=40 17:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:50 Get A/D filter: -9.255963e+061 result=40 17:09:50 Get A/D value=-858993460 result=40 17:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:50 Aux= 17:09:50 Message to Camera, serial 228207 queued 17:10:27 Received message from Master: op=PointingHead serial=228220 17:10:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:10:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:10:28 Point started: ret=0 17:10:28 point_skyscan result=0 17:10:28 Check angles 17:10:28 SkyScan query 17:10:29 SkyScan query done: ret=0 az=153.105<-10207 ze=8.88<-11408 Statuses=0009 0009 17:10:29 Msec=0 True Az=153.105 Ze=8.88 Az status=0009 Ze status=0009 17:10:29 Check angles 17:10:29 SkyScan query 17:10:30 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.12<-12808 Statuses=0009 0009 17:10:30 Msec=750 True Az=135.705 Ze=-12.12 Az status=0009 Ze status=0009 17:10:30 Check angles 17:10:30 SkyScan query 17:10:30 SkyScan query done: ret=0 az=118.17<-7878 ze=-33.06<-14204 Statuses=0009 0009 17:10:30 Msec=1500 True Az=118.17 Ze=-33.06 Az status=0009 Ze status=0009 17:10:31 Check angles 17:10:31 SkyScan query 17:10:31 SkyScan query done: ret=0 az=100.725<-6715 ze=-51.51<-15434 Statuses=0009 0009 17:10:31 Msec=2250 True Az=100.725 Ze=-51.51 Az status=0009 Ze status=0009 17:10:31 Check angles 17:10:31 SkyScan query 17:10:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 17:10:32 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 17:10:32 Check angles 17:10:32 SkyScan query 17:10:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:10:33 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:10:33 Message to Master queued w/err=0: serial=228220 error=0 17:10:38 Received message from Master: op=Filter serial=228221 17:10:38 Color wheel filter change from 0 to 0 17:10:38 FLIGetFilterPos err=0 currentPosition=0 17:10:38 FLIGetStepsRemaining err=0 RemainingSteps=0 17:10:38 Filter is already there-color wheel unchanged 17:10:38 Received message from Master: op=Shutter serial=228222 17:10:38 Shutter LASER close 17:10:38 Received message from Camera: op=State serial=228224 17:10:38 GetSingleValue result=40 Value=cccccccc 17:10:38 SkyScan query 17:10:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:10:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:39 Parameters OK 17:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:39 Set A/D data flow result=40 17:10:39 Set A/D channel type result=40 17:10:39 Set A/D encoding result=40 17:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:39 Set channel filter=0.000000e+000 result=40 17:10:39 Config A/D Result=40 17:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:39 Get A/D filter: -9.255963e+061 result=40 17:10:39 Get A/D value=-858993460 result=40 17:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:39 Parameters OK 17:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:39 Set A/D data flow result=40 17:10:39 Set A/D channel type result=40 17:10:39 Set A/D encoding result=40 17:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:39 Set channel filter=0.000000e+000 result=40 17:10:39 Config A/D Result=40 17:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:39 Get A/D filter: -9.255963e+061 result=40 17:10:39 Get A/D value=-858993460 result=40 17:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:10:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:10:39 Aux= 17:10:39 Message to Camera, serial 228224 queued 17:11:15 Received message from Master: op=PointingHead serial=228237 17:11:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:11:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:11:16 Point started: ret=0 17:11:16 point_skyscan result=0 17:11:16 Check angles 17:11:16 SkyScan query 17:11:17 SkyScan query done: ret=0 az=109.32<-7288 ze=-81.69<-17446 Statuses=0009 0009 17:11:17 Msec=0 True Az=109.32 Ze=-81.69 Az status=0009 Ze status=0009 17:11:17 Check angles 17:11:17 SkyScan query 17:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 17:11:18 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 17:11:18 Check angles 17:11:18 SkyScan query 17:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 17:11:19 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 17:11:19 Check angles 17:11:19 SkyScan query 17:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 17:11:19 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 17:11:19 Check angles 17:11:19 SkyScan query 17:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 17:11:20 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 17:11:20 Check angles 17:11:20 SkyScan query 17:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:11:21 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:11:21 Message to Master queued w/err=0: serial=228237 error=0 17:11:26 Received message from Master: op=Filter serial=228238 17:11:26 Color wheel filter change from 0 to 0 17:11:26 FLIGetFilterPos err=0 currentPosition=0 17:11:26 FLIGetStepsRemaining err=0 RemainingSteps=0 17:11:26 Filter is already there-color wheel unchanged 17:11:26 Received message from Master: op=Shutter serial=228239 17:11:26 Shutter LASER open 17:11:26 Received message from Camera: op=State serial=228241 17:11:26 GetSingleValue result=40 Value=cccccccc 17:11:26 SkyScan query 17:11:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:11:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:27 Parameters OK 17:11:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:27 Set A/D data flow result=40 17:11:27 Set A/D channel type result=40 17:11:27 Set A/D encoding result=40 17:11:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:27 Set channel filter=0.000000e+000 result=40 17:11:27 Config A/D Result=40 17:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:27 Get A/D filter: -9.255963e+061 result=40 17:11:27 Get A/D value=-858993460 result=40 17:11:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:27 Parameters OK 17:11:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:27 Set A/D data flow result=40 17:11:27 Set A/D channel type result=40 17:11:27 Set A/D encoding result=40 17:11:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:27 Set channel filter=0.000000e+000 result=40 17:11:27 Config A/D Result=40 17:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:27 Get A/D filter: -9.255963e+061 result=40 17:11:27 Get A/D value=-858993460 result=40 17:11:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:11:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:11:27 Aux= 17:11:27 Message to Camera, serial 228241 queued 17:11:35 Received message from Master: op=Shutter serial=228251 17:11:35 Shutter LASER close 17:11:36 Received message from Master: op=PointingHead serial=228255 17:11:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:11:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:11:36 Point started: ret=0 17:11:36 point_skyscan result=0 17:11:37 Check angles 17:11:37 SkyScan query 17:11:37 SkyScan query done: ret=0 az=89.82<-5988 ze=157.095<-1527 Statuses=0009 0009 17:11:37 Msec=0 True Az=89.82 Ze=157.095 Az status=0009 Ze status=0009 17:11:37 Check angles 17:11:37 SkyScan query 17:11:38 SkyScan query done: ret=0 az=72.315<-4821 ze=136.17<-2922 Statuses=0009 0009 17:11:38 Msec=750 True Az=72.315 Ze=136.17 Az status=0009 Ze status=0009 17:11:38 Check angles 17:11:38 SkyScan query 17:11:39 SkyScan query done: ret=0 az=54.825<-3655 ze=115.2<-4320 Statuses=0009 0009 17:11:39 Msec=1500 True Az=54.825 Ze=115.2 Az status=0009 Ze status=0009 17:11:39 Check angles 17:11:39 SkyScan query 17:11:40 SkyScan query done: ret=0 az=40.995<-2733 ze=94.215<-5719 Statuses=0009 0009 17:11:40 Msec=2250 True Az=40.995 Ze=94.215 Az status=0009 Ze status=0009 17:11:40 Check angles 17:11:40 SkyScan query 17:11:40 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 17:11:40 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 17:11:40 Check angles 17:11:40 SkyScan query 17:11:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 17:11:41 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 17:11:41 Check angles 17:11:41 SkyScan query 17:11:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:11:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:11:42 Message to Master queued w/err=0: serial=228255 error=0 17:11:47 Received message from Master: op=Filter serial=228256 17:11:47 Color wheel filter change from 0 to 0 17:11:47 FLIGetFilterPos err=0 currentPosition=0 17:11:47 FLIGetStepsRemaining err=0 RemainingSteps=0 17:11:47 Filter is already there-color wheel unchanged 17:11:47 Received message from Master: op=Shutter serial=228257 17:11:47 Shutter LASER close 17:11:47 Received message from Camera: op=State serial=228259 17:11:47 GetSingleValue result=40 Value=cccccccc 17:11:47 SkyScan query 17:11:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:11:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:48 Parameters OK 17:11:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:48 Set A/D data flow result=40 17:11:48 Set A/D channel type result=40 17:11:48 Set A/D encoding result=40 17:11:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:48 Set channel filter=0.000000e+000 result=40 17:11:48 Config A/D Result=40 17:11:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:48 Get A/D filter: -9.255963e+061 result=40 17:11:48 Get A/D value=-858993460 result=40 17:11:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:48 Parameters OK 17:11:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:48 Set A/D data flow result=40 17:11:48 Set A/D channel type result=40 17:11:48 Set A/D encoding result=40 17:11:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:48 Set channel filter=0.000000e+000 result=40 17:11:48 Config A/D Result=40 17:11:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:48 Get A/D filter: -9.255963e+061 result=40 17:11:48 Get A/D value=-858993460 result=40 17:11:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:11:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:11:48 Aux= 17:11:48 Message to Camera, serial 228259 queued 17:12:25 Received message from Master: op=PointingHead serial=228272 17:12:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:12:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:12:25 Point started: ret=0 17:12:25 point_skyscan result=0 17:12:26 Check angles 17:12:26 SkyScan query 17:12:26 SkyScan query done: ret=0 az=63.975<-4265 ze=66.51<-7566 Statuses=0009 0008 17:12:26 Msec=0 True Az=63.975 Ze=66.51 Az status=0009 Ze status=0008 17:12:26 Check angles 17:12:26 SkyScan query 17:12:27 SkyScan query done: ret=0 az=81.855<-5457 ze=66.51<-7566 Statuses=0009 0008 17:12:27 Msec=750 True Az=81.855 Ze=66.51 Az status=0009 Ze status=0008 17:12:27 Check angles 17:12:27 SkyScan query 17:12:28 SkyScan query done: ret=0 az=99.315<-6621 ze=66.51<-7566 Statuses=0009 0008 17:12:28 Msec=1500 True Az=99.315 Ze=66.51 Az status=0009 Ze status=0008 17:12:28 Check angles 17:12:28 SkyScan query 17:12:29 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 17:12:29 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 17:12:29 Check angles 17:12:29 SkyScan query 17:12:29 SkyScan query done: ret=0 az=134.16<-8944 ze=66.495<-7567 Statuses=0009 0008 17:12:29 Msec=3000 True Az=134.16 Ze=66.495 Az status=0009 Ze status=0008 17:12:29 Check angles 17:12:29 SkyScan query 17:12:30 SkyScan query done: ret=0 az=151.56<-10104 ze=66.495<-7567 Statuses=0009 0008 17:12:30 Msec=3750 True Az=151.56 Ze=66.495 Az status=0009 Ze status=0008 17:12:30 Check angles 17:12:30 SkyScan query 17:12:31 SkyScan query done: ret=0 az=158.04<-10536 ze=66.495<-7567 Statuses=0008 0008 17:12:31 Msec=4500 True Az=158.04 Ze=66.495 Az status=0008 Ze status=0008 17:12:31 Message to Master queued w/err=0: serial=228272 error=0 17:12:36 Received message from Master: op=Filter serial=228273 17:12:36 Color wheel filter change from 0 to 0 17:12:36 FLIGetFilterPos err=0 currentPosition=0 17:12:36 FLIGetStepsRemaining err=0 RemainingSteps=0 17:12:36 Filter is already there-color wheel unchanged 17:12:36 Received message from Master: op=Shutter serial=228274 17:12:36 Shutter LASER close 17:12:36 Received message from Camera: op=State serial=228276 17:12:36 GetSingleValue result=40 Value=cccccccc 17:12:36 SkyScan query 17:12:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:12:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:37 Parameters OK 17:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:37 Set A/D data flow result=40 17:12:37 Set A/D channel type result=40 17:12:37 Set A/D encoding result=40 17:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:37 Set channel filter=0.000000e+000 result=40 17:12:37 Config A/D Result=40 17:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:37 Get A/D filter: -9.255963e+061 result=40 17:12:37 Get A/D value=-858993460 result=40 17:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:37 Parameters OK 17:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:37 Set A/D data flow result=40 17:12:37 Set A/D channel type result=40 17:12:37 Set A/D encoding result=40 17:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:37 Set channel filter=0.000000e+000 result=40 17:12:37 Config A/D Result=40 17:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:37 Get A/D filter: -9.255963e+061 result=40 17:12:37 Get A/D value=-858993460 result=40 17:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:12:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:12:37 Aux= 17:12:37 Message to Camera, serial 228276 queued 17:13:13 Received message from Master: op=PointingHead serial=228289 17:13:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:13:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:13:14 Point started: ret=0 17:13:14 point_skyscan result=0 17:13:14 Check angles 17:13:14 SkyScan query 17:13:15 SkyScan query done: ret=0 az=135.045<-9003 ze=36.78<-9548 Statuses=0009 0009 17:13:15 Msec=0 True Az=135.045 Ze=36.78 Az status=0009 Ze status=0009 17:13:15 Check angles 17:13:15 SkyScan query 17:13:16 SkyScan query done: ret=0 az=117.6<-7840 ze=15.9<-10940 Statuses=0009 0009 17:13:16 Msec=750 True Az=117.6 Ze=15.9 Az status=0009 Ze status=0009 17:13:16 Check angles 17:13:16 SkyScan query 17:13:17 SkyScan query done: ret=0 az=100.17<-6678 ze=-5.115<-12341 Statuses=0009 0009 17:13:17 Msec=1500 True Az=100.17 Ze=-5.115 Az status=0009 Ze status=0009 17:13:17 Check angles 17:13:17 SkyScan query 17:13:17 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.55<-13770 Statuses=0009 0009 17:13:17 Msec=2250 True Az=82.215 Ze=-26.55 Az status=0009 Ze status=0009 17:13:17 Check angles 17:13:17 SkyScan query 17:13:18 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.58<-14572 Statuses=0009 0008 17:13:18 Msec=3000 True Az=64.815 Ze=-38.58 Az status=0009 Ze status=0008 17:13:18 Check angles 17:13:18 SkyScan query 17:13:19 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.52<-14568 Statuses=0009 0008 17:13:19 Msec=3750 True Az=47.355 Ze=-38.52 Az status=0009 Ze status=0008 17:13:19 Check angles 17:13:19 SkyScan query 17:13:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:13:20 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:13:20 Message to Master queued w/err=0: serial=228289 error=0 17:13:25 Received message from Master: op=Filter serial=228290 17:13:25 Color wheel filter change from 0 to 0 17:13:25 FLIGetFilterPos err=0 currentPosition=0 17:13:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:25 Filter is already there-color wheel unchanged 17:13:25 Received message from Master: op=Shutter serial=228291 17:13:25 Shutter LASER close 17:13:25 Received message from Camera: op=State serial=228293 17:13:25 GetSingleValue result=40 Value=cccccccc 17:13:25 SkyScan query 17:13:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:13:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:25 Parameters OK 17:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:25 Set A/D data flow result=40 17:13:25 Set A/D channel type result=40 17:13:25 Set A/D encoding result=40 17:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:25 Set channel filter=0.000000e+000 result=40 17:13:25 Config A/D Result=40 17:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:25 Get A/D filter: -9.255963e+061 result=40 17:13:25 Get A/D value=-858993460 result=40 17:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:25 Parameters OK 17:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:25 Set A/D data flow result=40 17:13:25 Set A/D channel type result=40 17:13:25 Set A/D encoding result=40 17:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:25 Set channel filter=0.000000e+000 result=40 17:13:25 Config A/D Result=40 17:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:25 Get A/D filter: -9.255963e+061 result=40 17:13:25 Get A/D value=-858993460 result=40 17:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:25 Aux= 17:13:25 Message to Camera, serial 228293 queued 17:14:02 Received message from Master: op=PointingHead serial=228306 17:14:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:14:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:14:03 Point started: ret=0 17:14:03 point_skyscan result=0 17:14:03 Check angles 17:14:03 SkyScan query 17:14:04 SkyScan query done: ret=0 az=64.14<-4276 ze=-68.55<-16570 Statuses=0009 0009 17:14:04 Msec=0 True Az=64.14 Ze=-68.55 Az status=0009 Ze status=0009 17:14:04 Check angles 17:14:04 SkyScan query 17:14:05 SkyScan query done: ret=0 az=81.675<-5445 ze=-89.52<-17968 Statuses=0009 0009 17:14:05 Msec=750 True Az=81.675 Ze=-89.52 Az status=0009 Ze status=0009 17:14:05 Check angles 17:14:05 SkyScan query 17:14:05 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.49<-19366 Statuses=0009 0009 17:14:05 Msec=1500 True Az=99.135 Ze=-110.49 Az status=0009 Ze status=0009 17:14:06 Check angles 17:14:06 SkyScan query 17:14:06 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.445<-20763 Statuses=0009 0009 17:14:06 Msec=2250 True Az=116.55 Ze=-131.445 Az status=0009 Ze status=0009 17:14:06 Check angles 17:14:06 SkyScan query 17:14:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 17:14:07 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 17:14:07 Check angles 17:14:07 SkyScan query 17:14:08 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:14:08 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:14:08 Message to Master queued w/err=0: serial=228306 error=0 17:14:13 Received message from Master: op=Filter serial=228307 17:14:13 Color wheel filter change from 0 to 0 17:14:13 FLIGetFilterPos err=0 currentPosition=0 17:14:13 FLIGetStepsRemaining err=0 RemainingSteps=0 17:14:13 Filter is already there-color wheel unchanged 17:14:13 Received message from Master: op=Shutter serial=228308 17:14:13 Shutter LASER close 17:14:13 Received message from Camera: op=State serial=228310 17:14:13 GetSingleValue result=40 Value=cccccccc 17:14:13 SkyScan query 17:14:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:14:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:13 Parameters OK 17:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:13 Set A/D data flow result=40 17:14:13 Set A/D channel type result=40 17:14:13 Set A/D encoding result=40 17:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:13 Set channel filter=0.000000e+000 result=40 17:14:13 Config A/D Result=40 17:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:13 Get A/D filter: -9.255963e+061 result=40 17:14:13 Get A/D value=-858993460 result=40 17:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:13 Parameters OK 17:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:13 Set A/D data flow result=40 17:14:13 Set A/D channel type result=40 17:14:13 Set A/D encoding result=40 17:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:13 Set channel filter=0.000000e+000 result=40 17:14:13 Config A/D Result=40 17:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:13 Get A/D filter: -9.255963e+061 result=40 17:14:13 Get A/D value=-858993460 result=40 17:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:14:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:14:13 Aux= 17:14:13 Message to Camera, serial 228310 queued 17:14:50 Received message from Master: op=PointingHead serial=228323 17:14:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:14:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:14:51 Point started: ret=0 17:14:51 point_skyscan result=0 17:14:51 Check angles 17:14:51 SkyScan query 17:14:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 17:14:52 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 17:14:52 Check angles 17:14:52 SkyScan query 17:14:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:14:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:14:53 Message to Master queued w/err=0: serial=228323 error=0 17:14:58 Received message from Master: op=Filter serial=228324 17:14:58 Color wheel filter change from 0 to 0 17:14:58 FLIGetFilterPos err=0 currentPosition=0 17:14:58 FLIGetStepsRemaining err=0 RemainingSteps=0 17:14:58 Filter is already there-color wheel unchanged 17:14:58 Received message from Master: op=Shutter serial=228325 17:14:58 Shutter LASER open 17:14:58 Received message from Camera: op=State serial=228327 17:14:58 GetSingleValue result=40 Value=cccccccc 17:14:58 SkyScan query 17:14:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:14:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:59 Parameters OK 17:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:59 Set A/D data flow result=40 17:14:59 Set A/D channel type result=40 17:14:59 Set A/D encoding result=40 17:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:59 Set channel filter=0.000000e+000 result=40 17:14:59 Config A/D Result=40 17:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:59 Get A/D filter: -9.255963e+061 result=40 17:14:59 Get A/D value=-858993460 result=40 17:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:59 Parameters OK 17:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:59 Set A/D data flow result=40 17:14:59 Set A/D channel type result=40 17:14:59 Set A/D encoding result=40 17:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:59 Set channel filter=0.000000e+000 result=40 17:14:59 Config A/D Result=40 17:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:59 Get A/D filter: -9.255963e+061 result=40 17:14:59 Get A/D value=-858993460 result=40 17:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:14:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:14:59 Aux= 17:14:59 Message to Camera, serial 228327 queued 17:15:07 Received message from Master: op=Shutter serial=228337 17:15:07 Shutter LASER close 17:15:08 Received message from Master: op=PointingHead serial=228341 17:15:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:15:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:15:08 Point started: ret=0 17:15:08 point_skyscan result=0 17:15:09 Check angles 17:15:09 SkyScan query 17:15:09 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.01<-21534 Statuses=0009 0009 17:15:09 Msec=0 True Az=136.185 Ze=-143.01 Az status=0009 Ze status=0009 17:15:10 Check angles 17:15:10 SkyScan query 17:15:10 SkyScan query done: ret=0 az=154.125<-10275 ze=-121.635<-20109 Statuses=0009 0009 17:15:10 Msec=750 True Az=154.125 Ze=-121.635 Az status=0009 Ze status=0009 17:15:10 Check angles 17:15:10 SkyScan query 17:15:11 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.59<-18706 Statuses=0009 0009 17:15:11 Msec=1500 True Az=171.555 Ze=-100.59 Az status=0009 Ze status=0009 17:15:11 Check angles 17:15:11 SkyScan query 17:15:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.185<-17279 Statuses=0008 0009 17:15:12 Msec=2250 True Az=175.995 Ze=-79.185 Az status=0008 Ze status=0009 17:15:12 Check angles 17:15:12 SkyScan query 17:15:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-57.87<-15858 Statuses=0008 0009 17:15:12 Msec=3000 True Az=175.995 Ze=-57.87 Az status=0008 Ze status=0009 17:15:13 Check angles 17:15:13 SkyScan query 17:15:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 17:15:13 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 17:15:13 Message to Master queued w/err=0: serial=228341 error=0 17:15:18 Received message from Master: op=Filter serial=228342 17:15:18 Color wheel filter change from 0 to 0 17:15:18 FLIGetFilterPos err=0 currentPosition=0 17:15:18 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:18 Filter is already there-color wheel unchanged 17:15:18 Received message from Master: op=Shutter serial=228343 17:15:18 Shutter LASER close 17:15:18 Received message from Camera: op=State serial=228345 17:15:18 GetSingleValue result=40 Value=cccccccc 17:15:18 SkyScan query 17:15:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:15:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:19 Parameters OK 17:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:19 Set A/D data flow result=40 17:15:19 Set A/D channel type result=40 17:15:19 Set A/D encoding result=40 17:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:19 Set channel filter=0.000000e+000 result=40 17:15:19 Config A/D Result=40 17:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:19 Get A/D filter: -9.255963e+061 result=40 17:15:19 Get A/D value=-858993460 result=40 17:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:19 Parameters OK 17:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:19 Set A/D data flow result=40 17:15:19 Set A/D channel type result=40 17:15:19 Set A/D encoding result=40 17:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:19 Set channel filter=0.000000e+000 result=40 17:15:19 Config A/D Result=40 17:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:19 Get A/D filter: -9.255963e+061 result=40 17:15:19 Get A/D value=-858993460 result=40 17:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:19 Aux= 17:15:19 Message to Camera, serial 228345 queued 17:15:27 Received message from Master: op=Identify serial=228346 [UTC 2018-12-17 17:15:52] 17:15:55 Received message from Master: op=PointingHead serial=228360 17:15:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:15:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:15:55 Point started: ret=0 17:15:55 point_skyscan result=0 17:15:56 Check angles 17:15:56 SkyScan query 17:15:57 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.765<-13451 Statuses=0009 0009 17:15:57 Msec=0 True Az=152.985 Ze=-21.765 Az status=0009 Ze status=0009 17:15:57 Check angles 17:15:57 SkyScan query 17:15:57 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.78<-12052 Statuses=0009 0009 17:15:57 Msec=750 True Az=135.435 Ze=-0.78 Az status=0009 Ze status=0009 17:15:58 Check angles 17:15:58 SkyScan query 17:15:58 SkyScan query done: ret=0 az=117.9<-7860 ze=20.22<-10652 Statuses=0009 0009 17:15:58 Msec=1500 True Az=117.9 Ze=20.22 Az status=0009 Ze status=0009 17:15:58 Check angles 17:15:58 SkyScan query 17:15:59 SkyScan query done: ret=0 az=100.545<-6703 ze=41.145<-9257 Statuses=0009 0009 17:15:59 Msec=2250 True Az=100.545 Ze=41.145 Az status=0009 Ze status=0009 17:15:59 Check angles 17:15:59 SkyScan query 17:16:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 17:16:00 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 17:16:00 Check angles 17:16:00 SkyScan query 17:16:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:16:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:16:00 Message to Master queued w/err=0: serial=228360 error=0 17:16:05 Received message from Master: op=Filter serial=228361 17:16:05 Color wheel filter change from 0 to 0 17:16:05 FLIGetFilterPos err=0 currentPosition=0 17:16:05 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:05 Filter is already there-color wheel unchanged 17:16:06 Received message from Master: op=Shutter serial=228362 17:16:06 Shutter LASER close 17:16:06 Received message from Camera: op=State serial=228364 17:16:06 GetSingleValue result=40 Value=cccccccc 17:16:06 SkyScan query 17:16:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:16:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:06 Parameters OK 17:16:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:06 Set A/D data flow result=40 17:16:06 Set A/D channel type result=40 17:16:06 Set A/D encoding result=40 17:16:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:06 Set channel filter=0.000000e+000 result=40 17:16:06 Config A/D Result=40 17:16:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:06 Get A/D filter: -9.255963e+061 result=40 17:16:06 Get A/D value=-858993460 result=40 17:16:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:06 Parameters OK 17:16:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:06 Set A/D data flow result=40 17:16:06 Set A/D channel type result=40 17:16:06 Set A/D encoding result=40 17:16:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:06 Set channel filter=0.000000e+000 result=40 17:16:06 Config A/D Result=40 17:16:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:06 Get A/D filter: -9.255963e+061 result=40 17:16:06 Get A/D value=-858993460 result=40 17:16:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:06 Aux= 17:16:06 Message to Camera, serial 228364 queued 17:16:43 Received message from Master: op=PointingHead serial=228377 17:16:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:16:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:16:43 Point started: ret=0 17:16:43 point_skyscan result=0 17:16:44 Check angles 17:16:44 SkyScan query 17:16:45 SkyScan query done: ret=0 az=109.005<-7267 ze=38.49<-9434 Statuses=0009 0008 17:16:45 Msec=0 True Az=109.005 Ze=38.49 Az status=0009 Ze status=0008 17:16:45 Check angles 17:16:45 SkyScan query 17:16:45 SkyScan query done: ret=0 az=126.495<-8433 ze=38.505<-9433 Statuses=0009 0008 17:16:45 Msec=750 True Az=126.495 Ze=38.505 Az status=0009 Ze status=0008 17:16:46 Check angles 17:16:46 SkyScan query 17:16:46 SkyScan query done: ret=0 az=144.36<-9624 ze=38.505<-9433 Statuses=0009 0008 17:16:46 Msec=1500 True Az=144.36 Ze=38.505 Az status=0009 Ze status=0008 17:16:46 Check angles 17:16:46 SkyScan query 17:16:47 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 17:16:47 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 17:16:47 Check angles 17:16:47 SkyScan query 17:16:48 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:16:48 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:16:48 Check angles 17:16:48 SkyScan query 17:16:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:16:48 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:16:48 Message to Master queued w/err=0: serial=228377 error=0 17:16:53 Received message from Master: op=Filter serial=228378 17:16:53 Color wheel filter change from 0 to 0 17:16:53 FLIGetFilterPos err=0 currentPosition=0 17:16:53 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:53 Filter is already there-color wheel unchanged 17:16:54 Received message from Master: op=Shutter serial=228379 17:16:54 Shutter LASER close 17:16:54 Received message from Camera: op=State serial=228381 17:16:54 GetSingleValue result=40 Value=cccccccc 17:16:54 SkyScan query 17:16:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:16:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:54 Parameters OK 17:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:54 Set A/D data flow result=40 17:16:54 Set A/D channel type result=40 17:16:54 Set A/D encoding result=40 17:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:54 Set channel filter=0.000000e+000 result=40 17:16:54 Config A/D Result=40 17:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:54 Get A/D filter: -9.255963e+061 result=40 17:16:54 Get A/D value=-858993460 result=40 17:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:54 Parameters OK 17:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:54 Set A/D data flow result=40 17:16:54 Set A/D channel type result=40 17:16:54 Set A/D encoding result=40 17:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:54 Set channel filter=0.000000e+000 result=40 17:16:54 Config A/D Result=40 17:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:54 Get A/D filter: -9.255963e+061 result=40 17:16:54 Get A/D value=-858993460 result=40 17:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:54 Aux= 17:16:54 Message to Camera, serial 228381 queued 17:17:31 Received message from Master: op=PointingHead serial=228394 17:17:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:17:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:17:31 Point started: ret=0 17:17:31 point_skyscan result=0 17:17:32 Check angles 17:17:32 SkyScan query 17:17:33 SkyScan query done: ret=0 az=153.21<-10214 ze=9.03<-11398 Statuses=0009 0009 17:17:33 Msec=0 True Az=153.21 Ze=9.03 Az status=0009 Ze status=0009 17:17:33 Check angles 17:17:33 SkyScan query 17:17:34 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.375<-12825 Statuses=0009 0009 17:17:34 Msec=750 True Az=135.375 Ze=-12.375 Az status=0009 Ze status=0009 17:17:34 Check angles 17:17:34 SkyScan query 17:17:34 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.345<-14223 Statuses=0009 0009 17:17:34 Msec=1500 True Az=117.84 Ze=-33.345 Az status=0009 Ze status=0009 17:17:34 Check angles 17:17:34 SkyScan query 17:17:35 SkyScan query done: ret=0 az=100.515<-6701 ze=-51.555<-15437 Statuses=0009 0009 17:17:35 Msec=2250 True Az=100.515 Ze=-51.555 Az status=0009 Ze status=0009 17:17:35 Check angles 17:17:35 SkyScan query 17:17:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 17:17:36 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 17:17:36 Check angles 17:17:36 SkyScan query 17:17:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:17:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:17:37 Message to Master queued w/err=0: serial=228394 error=0 17:17:42 Received message from Master: op=Filter serial=228395 17:17:42 Color wheel filter change from 0 to 0 17:17:42 FLIGetFilterPos err=0 currentPosition=0 17:17:42 FLIGetStepsRemaining err=0 RemainingSteps=0 17:17:42 Filter is already there-color wheel unchanged 17:17:42 Received message from Master: op=Shutter serial=228396 17:17:42 Shutter LASER close 17:17:42 Received message from Camera: op=State serial=228398 17:17:42 GetSingleValue result=40 Value=cccccccc 17:17:42 SkyScan query 17:17:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:17:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:42 Parameters OK 17:17:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:42 Set A/D data flow result=40 17:17:42 Set A/D channel type result=40 17:17:42 Set A/D encoding result=40 17:17:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:42 Set channel filter=0.000000e+000 result=40 17:17:42 Config A/D Result=40 17:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:42 Get A/D filter: -9.255963e+061 result=40 17:17:42 Get A/D value=-858993460 result=40 17:17:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:42 Parameters OK 17:17:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:42 Set A/D data flow result=40 17:17:42 Set A/D channel type result=40 17:17:42 Set A/D encoding result=40 17:17:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:42 Set channel filter=0.000000e+000 result=40 17:17:42 Config A/D Result=40 17:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:42 Get A/D filter: -9.255963e+061 result=40 17:17:42 Get A/D value=-858993460 result=40 17:17:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:17:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:17:42 Aux= 17:17:42 Message to Camera, serial 228398 queued 17:18:19 Received message from Master: op=PointingHead serial=228411 17:18:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:18:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:18:20 Point started: ret=0 17:18:20 point_skyscan result=0 17:18:20 Check angles 17:18:20 SkyScan query 17:18:21 SkyScan query done: ret=0 az=109.23<-7282 ze=-81.555<-17437 Statuses=0009 0009 17:18:21 Msec=0 True Az=109.23 Ze=-81.555 Az status=0009 Ze status=0009 17:18:21 Check angles 17:18:21 SkyScan query 17:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 17:18:22 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 17:18:22 Check angles 17:18:22 SkyScan query 17:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 17:18:22 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 17:18:23 Check angles 17:18:23 SkyScan query 17:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 17:18:23 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 17:18:23 Check angles 17:18:23 SkyScan query 17:18:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 17:18:24 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 17:18:24 Check angles 17:18:24 SkyScan query 17:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:18:25 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:18:25 Message to Master queued w/err=0: serial=228411 error=0 17:18:30 Received message from Master: op=Filter serial=228412 17:18:30 Color wheel filter change from 0 to 0 17:18:30 FLIGetFilterPos err=0 currentPosition=0 17:18:30 FLIGetStepsRemaining err=0 RemainingSteps=0 17:18:30 Filter is already there-color wheel unchanged 17:18:30 Received message from Master: op=Shutter serial=228413 17:18:30 Shutter LASER open 17:18:30 Received message from Camera: op=State serial=228415 17:18:30 GetSingleValue result=40 Value=cccccccc 17:18:30 SkyScan query 17:18:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:18:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:31 Parameters OK 17:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:31 Set A/D data flow result=40 17:18:31 Set A/D channel type result=40 17:18:31 Set A/D encoding result=40 17:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:31 Set channel filter=0.000000e+000 result=40 17:18:31 Config A/D Result=40 17:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:31 Get A/D filter: -9.255963e+061 result=40 17:18:31 Get A/D value=-858993460 result=40 17:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:31 Parameters OK 17:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:31 Set A/D data flow result=40 17:18:31 Set A/D channel type result=40 17:18:31 Set A/D encoding result=40 17:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:31 Set channel filter=0.000000e+000 result=40 17:18:31 Config A/D Result=40 17:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:31 Get A/D filter: -9.255963e+061 result=40 17:18:31 Get A/D value=-858993460 result=40 17:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:18:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:18:31 Aux= 17:18:31 Message to Camera, serial 228415 queued 17:18:39 Received message from Master: op=Shutter serial=228425 17:18:39 Shutter LASER close 17:18:39 Received message from Master: op=PointingHead serial=228429 17:18:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:18:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:18:40 Point started: ret=0 17:18:40 point_skyscan result=0 17:18:41 Check angles 17:18:41 SkyScan query 17:18:41 SkyScan query done: ret=0 az=90.165<-6011 ze=157.455<-1503 Statuses=0009 0009 17:18:41 Msec=0 True Az=90.165 Ze=157.455 Az status=0009 Ze status=0009 17:18:41 Check angles 17:18:41 SkyScan query 17:18:42 SkyScan query done: ret=0 az=72.585<-4839 ze=136.485<-2901 Statuses=0009 0009 17:18:42 Msec=750 True Az=72.585 Ze=136.485 Az status=0009 Ze status=0009 17:18:42 Check angles 17:18:42 SkyScan query 17:18:43 SkyScan query done: ret=0 az=55.215<-3681 ze=115.59<-4294 Statuses=0009 0009 17:18:43 Msec=1500 True Az=55.215 Ze=115.59 Az status=0009 Ze status=0009 17:18:43 Check angles 17:18:43 SkyScan query 17:18:43 SkyScan query done: ret=0 az=41.01<-2734 ze=94.575<-5695 Statuses=0009 0009 17:18:43 Msec=2250 True Az=41.01 Ze=94.575 Az status=0009 Ze status=0009 17:18:44 Check angles 17:18:44 SkyScan query 17:18:44 SkyScan query done: ret=0 az=40.995<-2733 ze=73.17<-7122 Statuses=0008 0009 17:18:44 Msec=3000 True Az=40.995 Ze=73.17 Az status=0008 Ze status=0009 17:18:44 Check angles 17:18:44 SkyScan query 17:18:45 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 17:18:45 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 17:18:45 Check angles 17:18:45 SkyScan query 17:18:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:18:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:18:46 Message to Master queued w/err=0: serial=228429 error=0 17:18:51 Received message from Master: op=Filter serial=228430 17:18:51 Color wheel filter change from 0 to 0 17:18:51 FLIGetFilterPos err=0 currentPosition=0 17:18:51 FLIGetStepsRemaining err=0 RemainingSteps=0 17:18:51 Filter is already there-color wheel unchanged 17:18:51 Received message from Master: op=Shutter serial=228431 17:18:51 Shutter LASER close 17:18:51 Received message from Camera: op=State serial=228433 17:18:51 GetSingleValue result=40 Value=cccccccc 17:18:51 SkyScan query 17:18:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:18:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:52 Parameters OK 17:18:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:52 Set A/D data flow result=40 17:18:52 Set A/D channel type result=40 17:18:52 Set A/D encoding result=40 17:18:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:52 Set channel filter=0.000000e+000 result=40 17:18:52 Config A/D Result=40 17:18:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:52 Get A/D filter: -9.255963e+061 result=40 17:18:52 Get A/D value=-858993460 result=40 17:18:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:52 Parameters OK 17:18:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:52 Set A/D data flow result=40 17:18:52 Set A/D channel type result=40 17:18:52 Set A/D encoding result=40 17:18:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:52 Set channel filter=0.000000e+000 result=40 17:18:52 Config A/D Result=40 17:18:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:52 Get A/D filter: -9.255963e+061 result=40 17:18:52 Get A/D value=-858993460 result=40 17:18:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:18:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:18:52 Aux= 17:18:52 Message to Camera, serial 228433 queued 17:19:28 Received message from Master: op=PointingHead serial=228446 17:19:28 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:19:28 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:19:29 Point started: ret=0 17:19:29 point_skyscan result=0 17:19:29 Check angles 17:19:29 SkyScan query 17:19:30 SkyScan query done: ret=0 az=63.975<-4265 ze=66.54<-7564 Statuses=0009 0008 17:19:30 Msec=0 True Az=63.975 Ze=66.54 Az status=0009 Ze status=0008 17:19:30 Check angles 17:19:30 SkyScan query 17:19:31 SkyScan query done: ret=0 az=81.42<-5428 ze=66.51<-7566 Statuses=0009 0008 17:19:31 Msec=750 True Az=81.42 Ze=66.51 Az status=0009 Ze status=0008 17:19:31 Check angles 17:19:31 SkyScan query 17:19:32 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 17:19:32 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 17:19:32 Check angles 17:19:32 SkyScan query 17:19:32 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 17:19:32 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 17:19:32 Check angles 17:19:32 SkyScan query 17:19:33 SkyScan query done: ret=0 az=134.52<-8968 ze=66.495<-7567 Statuses=0009 0008 17:19:33 Msec=3000 True Az=134.52 Ze=66.495 Az status=0009 Ze status=0008 17:19:33 Check angles 17:19:33 SkyScan query 17:19:34 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 17:19:34 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 17:19:34 Check angles 17:19:34 SkyScan query 17:19:35 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:19:35 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:19:35 Message to Master queued w/err=0: serial=228446 error=0 17:19:40 Received message from Master: op=Filter serial=228447 17:19:40 Color wheel filter change from 0 to 0 17:19:40 FLIGetFilterPos err=0 currentPosition=0 17:19:40 FLIGetStepsRemaining err=0 RemainingSteps=0 17:19:40 Filter is already there-color wheel unchanged 17:19:40 Received message from Master: op=Shutter serial=228448 17:19:40 Shutter LASER close 17:19:40 Received message from Camera: op=State serial=228450 17:19:40 GetSingleValue result=40 Value=cccccccc 17:19:40 SkyScan query 17:19:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:19:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:40 Parameters OK 17:19:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:40 Set A/D data flow result=40 17:19:40 Set A/D channel type result=40 17:19:40 Set A/D encoding result=40 17:19:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:40 Set channel filter=0.000000e+000 result=40 17:19:40 Config A/D Result=40 17:19:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:40 Get A/D filter: -9.255963e+061 result=40 17:19:40 Get A/D value=-858993460 result=40 17:19:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:40 Parameters OK 17:19:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:40 Set A/D data flow result=40 17:19:40 Set A/D channel type result=40 17:19:40 Set A/D encoding result=40 17:19:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:40 Set channel filter=0.000000e+000 result=40 17:19:40 Config A/D Result=40 17:19:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:40 Get A/D filter: -9.255963e+061 result=40 17:19:40 Get A/D value=-858993460 result=40 17:19:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:19:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:19:40 Aux= 17:19:40 Message to Camera, serial 228450 queued 17:20:17 Received message from Master: op=PointingHead serial=228463 17:20:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:20:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:20:18 Point started: ret=0 17:20:18 point_skyscan result=0 17:20:18 Check angles 17:20:18 SkyScan query 17:20:19 SkyScan query done: ret=0 az=135.255<-9017 ze=37.02<-9532 Statuses=0009 0009 17:20:19 Msec=0 True Az=135.255 Ze=37.02 Az status=0009 Ze status=0009 17:20:19 Check angles 17:20:19 SkyScan query 17:20:20 SkyScan query done: ret=0 az=117.75<-7850 ze=16.05<-10930 Statuses=0009 0009 17:20:20 Msec=750 True Az=117.75 Ze=16.05 Az status=0009 Ze status=0009 17:20:20 Check angles 17:20:20 SkyScan query 17:20:20 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.34<-12356 Statuses=0009 0009 17:20:20 Msec=1500 True Az=99.945 Ze=-5.34 Az status=0009 Ze status=0009 17:20:21 Check angles 17:20:21 SkyScan query 17:20:21 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.295<-13753 Statuses=0009 0009 17:20:21 Msec=2250 True Az=82.44 Ze=-26.295 Az status=0009 Ze status=0009 17:20:21 Check angles 17:20:21 SkyScan query 17:20:22 SkyScan query done: ret=0 az=64.905<-4327 ze=-38.58<-14572 Statuses=0009 0008 17:20:22 Msec=3000 True Az=64.905 Ze=-38.58 Az status=0009 Ze status=0008 17:20:22 Check angles 17:20:22 SkyScan query 17:20:23 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.52<-14568 Statuses=0009 0008 17:20:23 Msec=3750 True Az=47.445 Ze=-38.52 Az status=0009 Ze status=0008 17:20:23 Check angles 17:20:23 SkyScan query 17:20:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:20:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:20:23 Message to Master queued w/err=0: serial=228463 error=0 17:20:28 Received message from Master: op=Filter serial=228464 17:20:28 Color wheel filter change from 0 to 0 17:20:28 FLIGetFilterPos err=0 currentPosition=0 17:20:28 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:28 Filter is already there-color wheel unchanged 17:20:29 Received message from Master: op=Shutter serial=228465 17:20:29 Shutter LASER close 17:20:29 Received message from Camera: op=State serial=228467 17:20:29 GetSingleValue result=40 Value=cccccccc 17:20:29 SkyScan query 17:20:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:20:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:29 Parameters OK 17:20:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:29 Set A/D data flow result=40 17:20:29 Set A/D channel type result=40 17:20:29 Set A/D encoding result=40 17:20:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:29 Set channel filter=0.000000e+000 result=40 17:20:29 Config A/D Result=40 17:20:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:29 Get A/D filter: -9.255963e+061 result=40 17:20:29 Get A/D value=-858993460 result=40 17:20:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:29 Parameters OK 17:20:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:29 Set A/D data flow result=40 17:20:29 Set A/D channel type result=40 17:20:29 Set A/D encoding result=40 17:20:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:29 Set channel filter=0.000000e+000 result=40 17:20:29 Config A/D Result=40 17:20:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:29 Get A/D filter: -9.255963e+061 result=40 17:20:29 Get A/D value=-858993460 result=40 17:20:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:29 Aux= 17:20:29 Message to Camera, serial 228467 queued 17:21:05 Received message from Master: op=PointingHead serial=228479 17:21:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:21:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:21:05 Point started: ret=0 17:21:05 point_skyscan result=0 17:21:06 Check angles 17:21:06 SkyScan query 17:21:07 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.31<-16554 Statuses=0009 0009 17:21:07 Msec=0 True Az=63.93 Ze=-68.31 Az status=0009 Ze status=0009 17:21:07 Check angles 17:21:07 SkyScan query 17:21:08 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.28<-17952 Statuses=0009 0009 17:21:08 Msec=750 True Az=81.375 Ze=-89.28 Az status=0009 Ze status=0009 17:21:08 Check angles 17:21:08 SkyScan query 17:21:08 SkyScan query done: ret=0 az=98.88<-6592 ze=-110.205<-19347 Statuses=0009 0009 17:21:08 Msec=1500 True Az=98.88 Ze=-110.205 Az status=0009 Ze status=0009 17:21:08 Check angles 17:21:08 SkyScan query 17:21:09 SkyScan query done: ret=0 az=116.295<-7753 ze=-131.13<-20742 Statuses=0009 0009 17:21:09 Msec=2250 True Az=116.295 Ze=-131.13 Az status=0009 Ze status=0009 17:21:09 Check angles 17:21:09 SkyScan query 17:21:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.555<-21437 Statuses=0009 0008 17:21:10 Msec=3000 True Az=130.995 Ze=-141.555 Az status=0009 Ze status=0008 17:21:10 Check angles 17:21:10 SkyScan query 17:21:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 17:21:11 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 17:21:11 Message to Master queued w/err=0: serial=228479 error=0 17:21:16 Received message from Master: op=Filter serial=228480 17:21:16 Color wheel filter change from 0 to 0 17:21:16 FLIGetFilterPos err=0 currentPosition=0 17:21:16 FLIGetStepsRemaining err=0 RemainingSteps=0 17:21:16 Filter is already there-color wheel unchanged 17:21:16 Received message from Master: op=Shutter serial=228481 17:21:16 Shutter LASER close 17:21:16 Received message from Camera: op=State serial=228483 17:21:16 GetSingleValue result=40 Value=cccccccc 17:21:16 SkyScan query 17:21:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:21:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:16 Parameters OK 17:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:16 Set A/D data flow result=40 17:21:16 Set A/D channel type result=40 17:21:16 Set A/D encoding result=40 17:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:16 Set channel filter=0.000000e+000 result=40 17:21:16 Config A/D Result=40 17:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:16 Get A/D filter: -9.255963e+061 result=40 17:21:16 Get A/D value=-858993460 result=40 17:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:16 Parameters OK 17:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:16 Set A/D data flow result=40 17:21:16 Set A/D channel type result=40 17:21:16 Set A/D encoding result=40 17:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:16 Set channel filter=0.000000e+000 result=40 17:21:16 Config A/D Result=40 17:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:16 Get A/D filter: -9.255963e+061 result=40 17:21:16 Get A/D value=-858993460 result=40 17:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:21:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:21:16 Aux= 17:21:16 Message to Camera, serial 228483 queued 17:21:53 Received message from Master: op=PointingHead serial=228496 17:21:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:21:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:21:53 Point started: ret=0 17:21:53 point_skyscan result=0 17:21:54 Check angles 17:21:54 SkyScan query 17:21:55 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 17:21:55 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 17:21:55 Check angles 17:21:55 SkyScan query 17:21:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:21:56 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:21:56 Message to Master queued w/err=0: serial=228496 error=0 17:22:01 Received message from Master: op=Filter serial=228497 17:22:01 Color wheel filter change from 0 to 0 17:22:01 FLIGetFilterPos err=0 currentPosition=0 17:22:01 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:01 Filter is already there-color wheel unchanged 17:22:01 Received message from Master: op=Shutter serial=228498 17:22:01 Shutter LASER open 17:22:01 Received message from Camera: op=State serial=228500 17:22:01 GetSingleValue result=40 Value=cccccccc 17:22:01 SkyScan query 17:22:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:22:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:02 Parameters OK 17:22:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:02 Set A/D data flow result=40 17:22:02 Set A/D channel type result=40 17:22:02 Set A/D encoding result=40 17:22:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:02 Set channel filter=0.000000e+000 result=40 17:22:02 Config A/D Result=40 17:22:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:02 Get A/D filter: -9.255963e+061 result=40 17:22:02 Get A/D value=-858993460 result=40 17:22:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:02 Parameters OK 17:22:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:02 Set A/D data flow result=40 17:22:02 Set A/D channel type result=40 17:22:02 Set A/D encoding result=40 17:22:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:02 Set channel filter=0.000000e+000 result=40 17:22:02 Config A/D Result=40 17:22:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:02 Get A/D filter: -9.255963e+061 result=40 17:22:02 Get A/D value=-858993460 result=40 17:22:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:02 Aux= 17:22:02 Message to Camera, serial 228500 queued 17:22:09 Received message from Master: op=Shutter serial=228509 17:22:09 Shutter LASER close 17:22:10 Received message from Master: op=PointingHead serial=228513 17:22:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:22:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:22:10 Point started: ret=0 17:22:10 point_skyscan result=0 17:22:11 Check angles 17:22:11 SkyScan query 17:22:11 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.265<-21551 Statuses=0009 0009 17:22:11 Msec=0 True Az=135.945 Ze=-143.265 Az status=0009 Ze status=0009 17:22:11 Check angles 17:22:11 SkyScan query 17:22:12 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.31<-20154 Statuses=0009 0009 17:22:12 Msec=750 True Az=153.48 Ze=-122.31 Az status=0009 Ze status=0009 17:22:12 Check angles 17:22:12 SkyScan query 17:22:13 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.86<-18724 Statuses=0009 0009 17:22:13 Msec=1500 True Az=171.405 Ze=-100.86 Az status=0009 Ze status=0009 17:22:13 Check angles 17:22:13 SkyScan query 17:22:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.5<-17300 Statuses=0008 0009 17:22:14 Msec=2250 True Az=175.995 Ze=-79.5 Az status=0008 Ze status=0009 17:22:14 Check angles 17:22:14 SkyScan query 17:22:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.515<-15901 Statuses=0008 0009 17:22:14 Msec=3000 True Az=175.995 Ze=-58.515 Az status=0008 Ze status=0009 17:22:14 Check angles 17:22:14 SkyScan query 17:22:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:22:15 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:22:15 Message to Master queued w/err=0: serial=228513 error=0 17:22:20 Received message from Master: op=Filter serial=228514 17:22:20 Color wheel filter change from 0 to 0 17:22:20 FLIGetFilterPos err=0 currentPosition=0 17:22:20 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:20 Filter is already there-color wheel unchanged 17:22:20 Received message from Master: op=Shutter serial=228515 17:22:20 Shutter LASER close 17:22:20 Received message from Camera: op=State serial=228517 17:22:20 GetSingleValue result=40 Value=cccccccc 17:22:20 SkyScan query 17:22:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:22:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:21 Parameters OK 17:22:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:21 Set A/D data flow result=40 17:22:21 Set A/D channel type result=40 17:22:21 Set A/D encoding result=40 17:22:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:21 Set channel filter=0.000000e+000 result=40 17:22:21 Config A/D Result=40 17:22:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:21 Get A/D filter: -9.255963e+061 result=40 17:22:21 Get A/D value=-858993460 result=40 17:22:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:21 Parameters OK 17:22:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:21 Set A/D data flow result=40 17:22:21 Set A/D channel type result=40 17:22:21 Set A/D encoding result=40 17:22:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:21 Set channel filter=0.000000e+000 result=40 17:22:21 Config A/D Result=40 17:22:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:21 Get A/D filter: -9.255963e+061 result=40 17:22:21 Get A/D value=-858993460 result=40 17:22:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:21 Aux= 17:22:21 Message to Camera, serial 228517 queued 17:22:58 Received message from Master: op=PointingHead serial=228530 17:22:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:22:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:22:58 Point started: ret=0 17:22:58 point_skyscan result=0 17:22:59 Check angles 17:22:59 SkyScan query 17:22:59 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.42<-13428 Statuses=0009 0009 17:22:59 Msec=0 True Az=152.655 Ze=-21.42 Az status=0009 Ze status=0009 17:23:00 Check angles 17:23:00 SkyScan query 17:23:00 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.495<-12033 Statuses=0009 0009 17:23:00 Msec=750 True Az=135.135 Ze=-0.495 Az status=0009 Ze status=0009 17:23:00 Check angles 17:23:00 SkyScan query 17:23:01 SkyScan query done: ret=0 az=117.645<-7843 ze=20.46<-10636 Statuses=0009 0009 17:23:01 Msec=1500 True Az=117.645 Ze=20.46 Az status=0009 Ze status=0009 17:23:01 Check angles 17:23:01 SkyScan query 17:23:02 SkyScan query done: ret=0 az=100.26<-6684 ze=41.43<-9238 Statuses=0009 0009 17:23:02 Msec=2250 True Az=100.26 Ze=41.43 Az status=0009 Ze status=0009 17:23:02 Check angles 17:23:02 SkyScan query 17:23:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 17:23:02 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 17:23:03 Check angles 17:23:03 SkyScan query 17:23:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:23:03 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 17:23:03 Message to Master queued w/err=0: serial=228530 error=0 17:23:08 Received message from Master: op=Filter serial=228531 17:23:08 Color wheel filter change from 0 to 0 17:23:08 FLIGetFilterPos err=0 currentPosition=0 17:23:08 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:08 Filter is already there-color wheel unchanged 17:23:08 Received message from Master: op=Shutter serial=228532 17:23:08 Shutter LASER close 17:23:08 Received message from Camera: op=State serial=228534 17:23:08 GetSingleValue result=40 Value=cccccccc 17:23:08 SkyScan query 17:23:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:23:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:09 Parameters OK 17:23:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:09 Set A/D data flow result=40 17:23:09 Set A/D channel type result=40 17:23:09 Set A/D encoding result=40 17:23:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:09 Set channel filter=0.000000e+000 result=40 17:23:09 Config A/D Result=40 17:23:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:09 Get A/D filter: -9.255963e+061 result=40 17:23:09 Get A/D value=-858993460 result=40 17:23:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:09 Parameters OK 17:23:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:09 Set A/D data flow result=40 17:23:09 Set A/D channel type result=40 17:23:09 Set A/D encoding result=40 17:23:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:09 Set channel filter=0.000000e+000 result=40 17:23:09 Config A/D Result=40 17:23:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:09 Get A/D filter: -9.255963e+061 result=40 17:23:09 Get A/D value=-858993460 result=40 17:23:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:09 Aux= 17:23:09 Message to Camera, serial 228534 queued 17:23:46 Received message from Master: op=PointingHead serial=228547 17:23:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:23:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:23:46 Point started: ret=0 17:23:46 point_skyscan result=0 17:23:47 Check angles 17:23:47 SkyScan query 17:23:48 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 17:23:48 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 17:23:48 Check angles 17:23:48 SkyScan query 17:23:48 SkyScan query done: ret=0 az=126.615<-8441 ze=38.49<-9434 Statuses=0009 0008 17:23:48 Msec=750 True Az=126.615 Ze=38.49 Az status=0009 Ze status=0008 17:23:48 Check angles 17:23:48 SkyScan query 17:23:49 SkyScan query done: ret=0 az=144.36<-9624 ze=38.505<-9433 Statuses=0009 0008 17:23:49 Msec=1500 True Az=144.36 Ze=38.505 Az status=0009 Ze status=0008 17:23:49 Check angles 17:23:49 SkyScan query 17:23:50 SkyScan query done: ret=0 az=162.225<-10815 ze=38.505<-9433 Statuses=0009 0008 17:23:50 Msec=2250 True Az=162.225 Ze=38.505 Az status=0009 Ze status=0008 17:23:50 Check angles 17:23:50 SkyScan query 17:23:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 17:23:51 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 17:23:51 Check angles 17:23:51 SkyScan query 17:23:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:23:51 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:23:51 Message to Master queued w/err=0: serial=228547 error=0 17:23:56 Received message from Master: op=Filter serial=228548 17:23:56 Color wheel filter change from 0 to 0 17:23:56 FLIGetFilterPos err=0 currentPosition=0 17:23:56 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:56 Filter is already there-color wheel unchanged 17:23:56 Received message from Master: op=Shutter serial=228549 17:23:56 Shutter LASER close 17:23:57 Received message from Camera: op=State serial=228551 17:23:57 GetSingleValue result=40 Value=cccccccc 17:23:57 SkyScan query 17:23:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:23:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:57 Parameters OK 17:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:57 Set A/D data flow result=40 17:23:57 Set A/D channel type result=40 17:23:57 Set A/D encoding result=40 17:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:57 Set channel filter=0.000000e+000 result=40 17:23:57 Config A/D Result=40 17:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:57 Get A/D filter: -9.255963e+061 result=40 17:23:57 Get A/D value=-858993460 result=40 17:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:57 Parameters OK 17:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:57 Set A/D data flow result=40 17:23:57 Set A/D channel type result=40 17:23:57 Set A/D encoding result=40 17:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:57 Set channel filter=0.000000e+000 result=40 17:23:57 Config A/D Result=40 17:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:57 Get A/D filter: -9.255963e+061 result=40 17:23:57 Get A/D value=-858993460 result=40 17:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:57 Aux= 17:23:57 Message to Camera, serial 228551 queued 17:24:34 Received message from Master: op=PointingHead serial=228564 17:24:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:24:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:24:34 Point started: ret=0 17:24:34 point_skyscan result=0 17:24:35 Check angles 17:24:35 SkyScan query 17:24:36 SkyScan query done: ret=0 az=153.165<-10211 ze=8.835<-11411 Statuses=0009 0009 17:24:36 Msec=0 True Az=153.165 Ze=8.835 Az status=0009 Ze status=0009 17:24:36 Check angles 17:24:36 SkyScan query 17:24:36 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.165<-12811 Statuses=0009 0009 17:24:36 Msec=750 True Az=135.705 Ze=-12.165 Az status=0009 Ze status=0009 17:24:37 Check angles 17:24:37 SkyScan query 17:24:37 SkyScan query done: ret=0 az=118.185<-7879 ze=-33.105<-14207 Statuses=0009 0009 17:24:37 Msec=1500 True Az=118.185 Ze=-33.105 Az status=0009 Ze status=0009 17:24:37 Check angles 17:24:37 SkyScan query 17:24:38 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.57<-15438 Statuses=0009 0009 17:24:38 Msec=2250 True Az=100.425 Ze=-51.57 Az status=0009 Ze status=0009 17:24:38 Check angles 17:24:38 SkyScan query 17:24:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 17:24:39 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 17:24:39 Check angles 17:24:39 SkyScan query 17:24:39 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.495<-15433 Statuses=0008 0008 17:24:39 Msec=3750 True Az=85.98 Ze=-51.495 Az status=0008 Ze status=0008 17:24:39 Message to Master queued w/err=0: serial=228564 error=0 17:24:44 Received message from Master: op=Filter serial=228565 17:24:44 Color wheel filter change from 0 to 0 17:24:44 FLIGetFilterPos err=0 currentPosition=0 17:24:44 FLIGetStepsRemaining err=0 RemainingSteps=0 17:24:44 Filter is already there-color wheel unchanged 17:24:45 Received message from Master: op=Shutter serial=228566 17:24:45 Shutter LASER close 17:24:45 Received message from Camera: op=State serial=228568 17:24:45 GetSingleValue result=40 Value=cccccccc 17:24:45 SkyScan query 17:24:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:24:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:45 Parameters OK 17:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:45 Set A/D data flow result=40 17:24:45 Set A/D channel type result=40 17:24:45 Set A/D encoding result=40 17:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:45 Set channel filter=0.000000e+000 result=40 17:24:45 Config A/D Result=40 17:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:45 Get A/D filter: -9.255963e+061 result=40 17:24:45 Get A/D value=-858993460 result=40 17:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:45 Parameters OK 17:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:45 Set A/D data flow result=40 17:24:45 Set A/D channel type result=40 17:24:45 Set A/D encoding result=40 17:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:45 Set channel filter=0.000000e+000 result=40 17:24:45 Config A/D Result=40 17:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:45 Get A/D filter: -9.255963e+061 result=40 17:24:45 Get A/D value=-858993460 result=40 17:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:24:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:24:45 Aux= 17:24:45 Message to Camera, serial 228568 queued 17:25:22 Received message from Master: op=PointingHead serial=228581 17:25:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:25:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:25:22 Point started: ret=0 17:25:22 point_skyscan result=0 17:25:23 Check angles 17:25:23 SkyScan query 17:25:24 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.72<-17448 Statuses=0009 0009 17:25:24 Msec=0 True Az=109.365 Ze=-81.72 Az status=0009 Ze status=0009 17:25:24 Check angles 17:25:24 SkyScan query 17:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.08<-18872 Statuses=0008 0009 17:25:24 Msec=750 True Az=112.995 Ze=-103.08 Az status=0008 Ze status=0009 17:25:25 Check angles 17:25:25 SkyScan query 17:25:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.035<-20269 Statuses=0008 0009 17:25:25 Msec=1500 True Az=112.995 Ze=-124.035 Az status=0008 Ze status=0009 17:25:25 Check angles 17:25:25 SkyScan query 17:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.975<-21665 Statuses=0008 0009 17:25:26 Msec=2250 True Az=112.995 Ze=-144.975 Az status=0008 Ze status=0009 17:25:26 Check angles 17:25:26 SkyScan query 17:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.915<-23061 Statuses=0008 0009 17:25:27 Msec=3000 True Az=112.995 Ze=-165.915 Az status=0008 Ze status=0009 17:25:27 Check angles 17:25:27 SkyScan query 17:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:25:27 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:25:27 Message to Master queued w/err=0: serial=228581 error=0 17:25:32 Received message from Master: op=Filter serial=228582 17:25:32 Color wheel filter change from 0 to 0 17:25:32 FLIGetFilterPos err=0 currentPosition=0 17:25:32 FLIGetStepsRemaining err=0 RemainingSteps=0 17:25:32 Filter is already there-color wheel unchanged 17:25:33 Received message from Master: op=Shutter serial=228583 17:25:33 Shutter LASER open 17:25:33 Received message from Camera: op=State serial=228585 17:25:33 GetSingleValue result=40 Value=cccccccc 17:25:33 SkyScan query 17:25:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:25:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:33 Parameters OK 17:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:33 Set A/D data flow result=40 17:25:33 Set A/D channel type result=40 17:25:33 Set A/D encoding result=40 17:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:33 Set channel filter=0.000000e+000 result=40 17:25:33 Config A/D Result=40 17:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:33 Get A/D filter: -9.255963e+061 result=40 17:25:33 Get A/D value=-858993460 result=40 17:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:33 Parameters OK 17:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:33 Set A/D data flow result=40 17:25:33 Set A/D channel type result=40 17:25:33 Set A/D encoding result=40 17:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:33 Set channel filter=0.000000e+000 result=40 17:25:33 Config A/D Result=40 17:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:33 Get A/D filter: -9.255963e+061 result=40 17:25:33 Get A/D value=-858993460 result=40 17:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:25:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:25:33 Aux= 17:25:33 Message to Camera, serial 228585 queued 17:25:42 Received message from Master: op=Shutter serial=228595 17:25:42 Shutter LASER close 17:25:42 Received message from Master: op=PointingHead serial=228599 17:25:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:25:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-17 17:25:43] 17:25:43 Point started: ret=0 17:25:43 point_skyscan result=0 17:25:43 Check angles 17:25:43 SkyScan query 17:25:44 SkyScan query done: ret=0 az=88.305<-5887 ze=155.28<-1648 Statuses=0009 0009 17:25:44 Msec=0 True Az=88.305 Ze=155.28 Az status=0009 Ze status=0009 17:25:44 Check angles 17:25:44 SkyScan query 17:25:45 SkyScan query done: ret=0 az=70.425<-4695 ze=133.875<-3075 Statuses=0009 0009 17:25:45 Msec=750 True Az=70.425 Ze=133.875 Az status=0009 Ze status=0009 17:25:45 Check angles 17:25:45 SkyScan query 17:25:46 SkyScan query done: ret=0 az=53.025<-3535 ze=112.89<-4474 Statuses=0009 0009 17:25:46 Msec=1500 True Az=53.025 Ze=112.89 Az status=0009 Ze status=0009 17:25:46 Check angles 17:25:46 SkyScan query 17:25:46 SkyScan query done: ret=0 az=40.995<-2733 ze=91.935<-5871 Statuses=0009 0009 17:25:46 Msec=2250 True Az=40.995 Ze=91.935 Az status=0009 Ze status=0009 17:25:46 Check angles 17:25:46 SkyScan query 17:25:47 SkyScan query done: ret=0 az=40.995<-2733 ze=71.01<-7266 Statuses=0008 0009 17:25:47 Msec=3000 True Az=40.995 Ze=71.01 Az status=0008 Ze status=0009 17:25:47 Check angles 17:25:47 SkyScan query 17:25:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.72<-8552 Statuses=0008 0009 17:25:48 Msec=3750 True Az=40.995 Ze=51.72 Az status=0008 Ze status=0009 17:25:48 Check angles 17:25:48 SkyScan query 17:25:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:25:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:25:49 Message to Master queued w/err=0: serial=228599 error=0 17:25:54 Received message from Master: op=Filter serial=228600 17:25:54 Color wheel filter change from 0 to 0 17:25:54 FLIGetFilterPos err=0 currentPosition=0 17:25:54 FLIGetStepsRemaining err=0 RemainingSteps=0 17:25:54 Filter is already there-color wheel unchanged 17:25:54 Received message from Master: op=Shutter serial=228601 17:25:54 Shutter LASER close 17:25:54 Received message from Camera: op=State serial=228603 17:25:54 GetSingleValue result=40 Value=cccccccc 17:25:54 SkyScan query 17:25:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:25:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:54 Parameters OK 17:25:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:54 Set A/D data flow result=40 17:25:54 Set A/D channel type result=40 17:25:54 Set A/D encoding result=40 17:25:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:54 Set channel filter=0.000000e+000 result=40 17:25:54 Config A/D Result=40 17:25:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:54 Get A/D filter: -9.255963e+061 result=40 17:25:54 Get A/D value=-858993460 result=40 17:25:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:25:54 Parameters OK 17:25:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:25:54 Set A/D data flow result=40 17:25:54 Set A/D channel type result=40 17:25:54 Set A/D encoding result=40 17:25:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:25:54 Set channel filter=0.000000e+000 result=40 17:25:54 Config A/D Result=40 17:25:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:25:54 Get A/D filter: -9.255963e+061 result=40 17:25:54 Get A/D value=-858993460 result=40 17:25:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:25:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:25:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:25:54 Aux= 17:25:54 Message to Camera, serial 228603 queued 17:26:31 Received message from Master: op=PointingHead serial=228616 17:26:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:26:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:26:32 Point started: ret=0 17:26:32 point_skyscan result=0 17:26:32 Check angles 17:26:32 SkyScan query 17:26:33 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 17:26:33 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 17:26:33 Check angles 17:26:33 SkyScan query 17:26:34 SkyScan query done: ret=0 az=81.765<-5451 ze=66.51<-7566 Statuses=0009 0008 17:26:34 Msec=750 True Az=81.765 Ze=66.51 Az status=0009 Ze status=0008 17:26:34 Check angles 17:26:34 SkyScan query 17:26:34 SkyScan query done: ret=0 az=99.315<-6621 ze=66.495<-7567 Statuses=0009 0008 17:26:34 Msec=1500 True Az=99.315 Ze=66.495 Az status=0009 Ze status=0008 17:26:35 Check angles 17:26:35 SkyScan query 17:26:35 SkyScan query done: ret=0 az=116.715<-7781 ze=66.495<-7567 Statuses=0009 0008 17:26:35 Msec=2250 True Az=116.715 Ze=66.495 Az status=0009 Ze status=0008 17:26:35 Check angles 17:26:35 SkyScan query 17:26:36 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 17:26:36 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 17:26:36 Check angles 17:26:36 SkyScan query 17:26:37 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 17:26:37 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 17:26:37 Check angles 17:26:37 SkyScan query 17:26:37 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:26:37 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:26:37 Message to Master queued w/err=0: serial=228616 error=0 17:26:42 Received message from Master: op=Filter serial=228617 17:26:42 Color wheel filter change from 0 to 0 17:26:42 FLIGetFilterPos err=0 currentPosition=0 17:26:42 FLIGetStepsRemaining err=0 RemainingSteps=0 17:26:42 Filter is already there-color wheel unchanged 17:26:43 Received message from Master: op=Shutter serial=228618 17:26:43 Shutter LASER close 17:26:43 Received message from Camera: op=State serial=228620 17:26:43 GetSingleValue result=40 Value=cccccccc 17:26:43 SkyScan query 17:26:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:26:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:43 Parameters OK 17:26:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:43 Set A/D data flow result=40 17:26:43 Set A/D channel type result=40 17:26:43 Set A/D encoding result=40 17:26:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:43 Set channel filter=0.000000e+000 result=40 17:26:43 Config A/D Result=40 17:26:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:43 Get A/D filter: -9.255963e+061 result=40 17:26:43 Get A/D value=-858993460 result=40 17:26:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:26:43 Parameters OK 17:26:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:26:43 Set A/D data flow result=40 17:26:43 Set A/D channel type result=40 17:26:43 Set A/D encoding result=40 17:26:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:26:43 Set channel filter=0.000000e+000 result=40 17:26:43 Config A/D Result=40 17:26:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:26:43 Get A/D filter: -9.255963e+061 result=40 17:26:43 Get A/D value=-858993460 result=40 17:26:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:26:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:26:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:26:43 Aux= 17:26:43 Message to Camera, serial 228620 queued 17:27:20 Received message from Master: op=PointingHead serial=228633 17:27:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:27:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:27:20 Point started: ret=0 17:27:20 point_skyscan result=0 17:27:21 Check angles 17:27:21 SkyScan query 17:27:22 SkyScan query done: ret=0 az=135.18<-9012 ze=36.855<-9543 Statuses=0009 0009 17:27:22 Msec=0 True Az=135.18 Ze=36.855 Az status=0009 Ze status=0009 17:27:22 Check angles 17:27:22 SkyScan query 17:27:23 SkyScan query done: ret=0 az=117.315<-7821 ze=15.51<-10966 Statuses=0009 0009 17:27:23 Msec=750 True Az=117.315 Ze=15.51 Az status=0009 Ze status=0009 17:27:23 Check angles 17:27:23 SkyScan query 17:27:23 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.55<-12370 Statuses=0009 0009 17:27:23 Msec=1500 True Az=99.96 Ze=-5.55 Az status=0009 Ze status=0009 17:27:23 Check angles 17:27:23 SkyScan query 17:27:24 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.49<-13766 Statuses=0009 0009 17:27:24 Msec=2250 True Az=82.455 Ze=-26.49 Az status=0009 Ze status=0009 17:27:24 Check angles 17:27:24 SkyScan query 17:27:25 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.58<-14572 Statuses=0009 0008 17:27:25 Msec=3000 True Az=64.92 Ze=-38.58 Az status=0009 Ze status=0008 17:27:25 Check angles 17:27:25 SkyScan query 17:27:26 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.52<-14568 Statuses=0009 0008 17:27:26 Msec=3750 True Az=47.445 Ze=-38.52 Az status=0009 Ze status=0008 17:27:26 Check angles 17:27:26 SkyScan query 17:27:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:27:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:27:26 Message to Master queued w/err=0: serial=228633 error=0 17:27:31 Received message from Master: op=Filter serial=228634 17:27:31 Color wheel filter change from 0 to 0 17:27:31 FLIGetFilterPos err=0 currentPosition=0 17:27:31 FLIGetStepsRemaining err=0 RemainingSteps=0 17:27:31 Filter is already there-color wheel unchanged 17:27:31 Received message from Master: op=Shutter serial=228635 17:27:31 Shutter LASER close 17:27:32 Received message from Camera: op=State serial=228637 17:27:32 GetSingleValue result=40 Value=cccccccc 17:27:32 SkyScan query 17:27:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:27:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:32 Parameters OK 17:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:32 Set A/D data flow result=40 17:27:32 Set A/D channel type result=40 17:27:32 Set A/D encoding result=40 17:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:32 Set channel filter=0.000000e+000 result=40 17:27:32 Config A/D Result=40 17:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:32 Get A/D filter: -9.255963e+061 result=40 17:27:32 Get A/D value=-858993460 result=40 17:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:27:32 Parameters OK 17:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:27:32 Set A/D data flow result=40 17:27:32 Set A/D channel type result=40 17:27:32 Set A/D encoding result=40 17:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:27:32 Set channel filter=0.000000e+000 result=40 17:27:32 Config A/D Result=40 17:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:27:32 Get A/D filter: -9.255963e+061 result=40 17:27:32 Get A/D value=-858993460 result=40 17:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:27:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:27:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:27:32 Aux= 17:27:32 Message to Camera, serial 228637 queued 17:28:09 Received message from Master: op=PointingHead serial=228650 17:28:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:28:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:28:09 Point started: ret=0 17:28:09 point_skyscan result=0 17:28:10 Check angles 17:28:10 SkyScan query 17:28:11 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.34<-16556 Statuses=0009 0009 17:28:11 Msec=0 True Az=64.005 Ze=-68.34 Az status=0009 Ze status=0009 17:28:11 Check angles 17:28:11 SkyScan query 17:28:11 SkyScan query done: ret=0 az=81.39<-5426 ze=-89.31<-17954 Statuses=0009 0009 17:28:11 Msec=750 True Az=81.39 Ze=-89.31 Az status=0009 Ze status=0009 17:28:12 Check angles 17:28:12 SkyScan query 17:28:12 SkyScan query done: ret=0 az=98.865<-6591 ze=-110.235<-19349 Statuses=0009 0009 17:28:12 Msec=1500 True Az=98.865 Ze=-110.235 Az status=0009 Ze status=0009 17:28:12 Check angles 17:28:12 SkyScan query 17:28:13 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.595<-20773 Statuses=0009 0009 17:28:13 Msec=2250 True Az=116.76 Ze=-131.595 Az status=0009 Ze status=0009 17:28:13 Check angles 17:28:13 SkyScan query 17:28:14 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 17:28:14 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 17:28:14 Check angles 17:28:14 SkyScan query 17:28:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 17:28:14 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 17:28:14 Message to Master queued w/err=0: serial=228650 error=0 17:28:19 Received message from Master: op=Filter serial=228651 17:28:19 Color wheel filter change from 0 to 0 17:28:19 FLIGetFilterPos err=0 currentPosition=0 17:28:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:28:19 Filter is already there-color wheel unchanged 17:28:20 Received message from Master: op=Shutter serial=228652 17:28:20 Shutter LASER close 17:28:20 Received message from Camera: op=State serial=228654 17:28:20 GetSingleValue result=40 Value=cccccccc 17:28:20 SkyScan query 17:28:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:28:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:20 Parameters OK 17:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:20 Set A/D data flow result=40 17:28:20 Set A/D channel type result=40 17:28:20 Set A/D encoding result=40 17:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:20 Set channel filter=0.000000e+000 result=40 17:28:20 Config A/D Result=40 17:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:20 Get A/D filter: -9.255963e+061 result=40 17:28:20 Get A/D value=-858993460 result=40 17:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:28:20 Parameters OK 17:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:28:20 Set A/D data flow result=40 17:28:20 Set A/D channel type result=40 17:28:20 Set A/D encoding result=40 17:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:28:20 Set channel filter=0.000000e+000 result=40 17:28:20 Config A/D Result=40 17:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:28:20 Get A/D filter: -9.255963e+061 result=40 17:28:20 Get A/D value=-858993460 result=40 17:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:28:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:28:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:28:20 Aux= 17:28:20 Message to Camera, serial 228654 queued 17:28:57 Received message from Master: op=PointingHead serial=228667 17:28:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:28:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:28:57 Point started: ret=0 17:28:57 point_skyscan result=0 17:28:58 Check angles 17:28:58 SkyScan query 17:28:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0009 0009 17:28:59 Msec=0 True Az=112.995 Ze=-171.21 Az status=0009 Ze status=0009 17:28:59 Check angles 17:28:59 SkyScan query 17:28:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:28:59 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:28:59 Message to Master queued w/err=0: serial=228667 error=0 17:29:04 Received message from Master: op=Filter serial=228668 17:29:04 Color wheel filter change from 0 to 0 17:29:04 FLIGetFilterPos err=0 currentPosition=0 17:29:04 FLIGetStepsRemaining err=0 RemainingSteps=0 17:29:04 Filter is already there-color wheel unchanged 17:29:05 Received message from Master: op=Shutter serial=228669 17:29:05 Shutter LASER open 17:29:05 Received message from Camera: op=State serial=228671 17:29:05 GetSingleValue result=40 Value=cccccccc 17:29:05 SkyScan query 17:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:29:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:05 Parameters OK 17:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:05 Set A/D data flow result=40 17:29:05 Set A/D channel type result=40 17:29:05 Set A/D encoding result=40 17:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:05 Set channel filter=0.000000e+000 result=40 17:29:05 Config A/D Result=40 17:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:05 Get A/D filter: -9.255963e+061 result=40 17:29:05 Get A/D value=-858993460 result=40 17:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:05 Parameters OK 17:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:05 Set A/D data flow result=40 17:29:05 Set A/D channel type result=40 17:29:05 Set A/D encoding result=40 17:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:05 Set channel filter=0.000000e+000 result=40 17:29:05 Config A/D Result=40 17:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:05 Get A/D filter: -9.255963e+061 result=40 17:29:05 Get A/D value=-858993460 result=40 17:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:29:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:29:05 Aux= 17:29:05 Message to Camera, serial 228671 queued 17:29:14 Received message from Master: op=Shutter serial=228681 17:29:14 Shutter LASER close 17:29:14 Received message from Master: op=PointingHead serial=228685 17:29:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:29:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:29:15 Point started: ret=0 17:29:15 point_skyscan result=0 17:29:15 Check angles 17:29:15 SkyScan query 17:29:16 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.1<-21540 Statuses=0009 0009 17:29:16 Msec=0 True Az=136.155 Ze=-143.1 Az status=0009 Ze status=0009 17:29:16 Check angles 17:29:16 SkyScan query 17:29:17 SkyScan query done: ret=0 az=153.57<-10238 ze=-122.13<-20142 Statuses=0009 0009 17:29:17 Msec=750 True Az=153.57 Ze=-122.13 Az status=0009 Ze status=0009 17:29:17 Check angles 17:29:17 SkyScan query 17:29:18 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.145<-18743 Statuses=0009 0009 17:29:18 Msec=1500 True Az=171.045 Ze=-101.145 Az status=0009 Ze status=0009 17:29:18 Check angles 17:29:18 SkyScan query 17:29:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-80.25<-17350 Statuses=0008 0009 17:29:18 Msec=2250 True Az=175.995 Ze=-80.25 Az status=0008 Ze status=0009 17:29:18 Check angles 17:29:18 SkyScan query 17:29:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.28<-15952 Statuses=0008 0009 17:29:19 Msec=3000 True Az=175.995 Ze=-59.28 Az status=0008 Ze status=0009 17:29:19 Check angles 17:29:19 SkyScan query 17:29:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:29:20 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:29:20 Message to Master queued w/err=0: serial=228685 error=0 17:29:25 Received message from Master: op=Filter serial=228686 17:29:25 Color wheel filter change from 0 to 0 17:29:25 FLIGetFilterPos err=0 currentPosition=0 17:29:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:29:25 Filter is already there-color wheel unchanged 17:29:25 Received message from Master: op=Shutter serial=228687 17:29:25 Shutter LASER close 17:29:25 Received message from Camera: op=State serial=228689 17:29:25 GetSingleValue result=40 Value=cccccccc 17:29:25 SkyScan query 17:29:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:29:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:26 Parameters OK 17:29:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:26 Set A/D data flow result=40 17:29:26 Set A/D channel type result=40 17:29:26 Set A/D encoding result=40 17:29:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:26 Set channel filter=0.000000e+000 result=40 17:29:26 Config A/D Result=40 17:29:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:26 Get A/D filter: -9.255963e+061 result=40 17:29:26 Get A/D value=-858993460 result=40 17:29:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:29:26 Parameters OK 17:29:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:29:26 Set A/D data flow result=40 17:29:26 Set A/D channel type result=40 17:29:26 Set A/D encoding result=40 17:29:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:29:26 Set channel filter=0.000000e+000 result=40 17:29:26 Config A/D Result=40 17:29:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:29:26 Get A/D filter: -9.255963e+061 result=40 17:29:26 Get A/D value=-858993460 result=40 17:29:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:29:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:29:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:29:26 Aux= 17:29:26 Message to Camera, serial 228689 queued 17:30:03 Received message from Master: op=PointingHead serial=228702 17:30:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:30:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:30:03 Point started: ret=0 17:30:03 point_skyscan result=0 17:30:04 Check angles 17:30:04 SkyScan query 17:30:04 SkyScan query done: ret=0 az=153.21<-10214 ze=-22.02<-13468 Statuses=0009 0009 17:30:04 Msec=0 True Az=153.21 Ze=-22.02 Az status=0009 Ze status=0009 17:30:04 Check angles 17:30:04 SkyScan query 17:30:05 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.6<-12040 Statuses=0009 0009 17:30:05 Msec=750 True Az=135.375 Ze=-0.6 Az status=0009 Ze status=0009 17:30:05 Check angles 17:30:05 SkyScan query 17:30:06 SkyScan query done: ret=0 az=117.51<-7834 ze=20.85<-10610 Statuses=0009 0009 17:30:06 Msec=1500 True Az=117.51 Ze=20.85 Az status=0009 Ze status=0009 17:30:06 Check angles 17:30:06 SkyScan query 17:30:07 SkyScan query done: ret=0 az=99.75<-6650 ze=42.18<-9188 Statuses=0009 0009 17:30:07 Msec=2250 True Az=99.75 Ze=42.18 Az status=0009 Ze status=0009 17:30:07 Check angles 17:30:07 SkyScan query 17:30:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 17:30:07 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 17:30:08 Check angles 17:30:08 SkyScan query 17:30:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:30:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:30:08 Message to Master queued w/err=0: serial=228702 error=0 17:30:13 Received message from Master: op=Filter serial=228703 17:30:13 Color wheel filter change from 0 to 0 17:30:13 FLIGetFilterPos err=0 currentPosition=0 17:30:13 FLIGetStepsRemaining err=0 RemainingSteps=0 17:30:13 Filter is already there-color wheel unchanged 17:30:13 Received message from Master: op=Shutter serial=228704 17:30:13 Shutter LASER close 17:30:13 Received message from Camera: op=State serial=228706 17:30:13 GetSingleValue result=40 Value=cccccccc 17:30:13 SkyScan query 17:30:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:30:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:14 Parameters OK 17:30:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:14 Set A/D data flow result=40 17:30:14 Set A/D channel type result=40 17:30:14 Set A/D encoding result=40 17:30:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:14 Set channel filter=0.000000e+000 result=40 17:30:14 Config A/D Result=40 17:30:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:14 Get A/D filter: -9.255963e+061 result=40 17:30:14 Get A/D value=-858993460 result=40 17:30:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:30:14 Parameters OK 17:30:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:30:14 Set A/D data flow result=40 17:30:14 Set A/D channel type result=40 17:30:14 Set A/D encoding result=40 17:30:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:30:14 Set channel filter=0.000000e+000 result=40 17:30:14 Config A/D Result=40 17:30:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:30:14 Get A/D filter: -9.255963e+061 result=40 17:30:14 Get A/D value=-858993460 result=40 17:30:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:30:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:30:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:30:14 Aux= 17:30:14 Message to Camera, serial 228706 queued 17:30:51 Received message from Master: op=PointingHead serial=228719 17:30:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:30:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:30:51 Point started: ret=0 17:30:51 point_skyscan result=0 17:30:52 Check angles 17:30:52 SkyScan query 17:30:52 SkyScan query done: ret=0 az=108.93<-7262 ze=38.475<-9435 Statuses=0009 0008 17:30:52 Msec=0 True Az=108.93 Ze=38.475 Az status=0009 Ze status=0008 17:30:53 Check angles 17:30:53 SkyScan query 17:30:53 SkyScan query done: ret=0 az=126.42<-8428 ze=38.49<-9434 Statuses=0009 0008 17:30:53 Msec=750 True Az=126.42 Ze=38.49 Az status=0009 Ze status=0008 17:30:53 Check angles 17:30:53 SkyScan query 17:30:54 SkyScan query done: ret=0 az=143.88<-9592 ze=38.505<-9433 Statuses=0009 0008 17:30:54 Msec=1500 True Az=143.88 Ze=38.505 Az status=0009 Ze status=0008 17:30:54 Check angles 17:30:54 SkyScan query 17:30:55 SkyScan query done: ret=0 az=161.295<-10753 ze=38.505<-9433 Statuses=0009 0008 17:30:55 Msec=2250 True Az=161.295 Ze=38.505 Az status=0009 Ze status=0008 17:30:55 Check angles 17:30:55 SkyScan query 17:30:55 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:30:55 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:30:56 Check angles 17:30:56 SkyScan query 17:30:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:30:56 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:30:56 Message to Master queued w/err=0: serial=228719 error=0 17:31:01 Received message from Master: op=Filter serial=228720 17:31:01 Color wheel filter change from 0 to 0 17:31:01 FLIGetFilterPos err=0 currentPosition=0 17:31:01 FLIGetStepsRemaining err=0 RemainingSteps=0 17:31:01 Filter is already there-color wheel unchanged 17:31:01 Received message from Master: op=Shutter serial=228721 17:31:01 Shutter LASER close 17:31:01 Received message from Camera: op=State serial=228723 17:31:01 GetSingleValue result=40 Value=cccccccc 17:31:01 SkyScan query 17:31:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:31:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:02 Parameters OK 17:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:02 Set A/D data flow result=40 17:31:02 Set A/D channel type result=40 17:31:02 Set A/D encoding result=40 17:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:02 Set channel filter=0.000000e+000 result=40 17:31:02 Config A/D Result=40 17:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:02 Get A/D filter: -9.255963e+061 result=40 17:31:02 Get A/D value=-858993460 result=40 17:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:02 Parameters OK 17:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:02 Set A/D data flow result=40 17:31:02 Set A/D channel type result=40 17:31:02 Set A/D encoding result=40 17:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:02 Set channel filter=0.000000e+000 result=40 17:31:02 Config A/D Result=40 17:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:02 Get A/D filter: -9.255963e+061 result=40 17:31:02 Get A/D value=-858993460 result=40 17:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:31:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:31:02 Aux= 17:31:02 Message to Camera, serial 228723 queued 17:31:39 Received message from Master: op=PointingHead serial=228736 17:31:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:31:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:31:39 Point started: ret=0 17:31:39 point_skyscan result=0 17:31:40 Check angles 17:31:40 SkyScan query 17:31:40 SkyScan query done: ret=0 az=152.52<-10168 ze=8.13<-11458 Statuses=0009 0009 17:31:40 Msec=0 True Az=152.52 Ze=8.13 Az status=0009 Ze status=0009 17:31:41 Check angles 17:31:41 SkyScan query 17:31:41 SkyScan query done: ret=0 az=134.595<-8973 ze=-13.2<-12880 Statuses=0009 0009 17:31:41 Msec=750 True Az=134.595 Ze=-13.2 Az status=0009 Ze status=0009 17:31:41 Check angles 17:31:41 SkyScan query 17:31:42 SkyScan query done: ret=0 az=117.15<-7810 ze=-34.155<-14277 Statuses=0009 0009 17:31:42 Msec=1500 True Az=117.15 Ze=-34.155 Az status=0009 Ze status=0009 17:31:42 Check angles 17:31:42 SkyScan query 17:31:43 SkyScan query done: ret=0 az=99.72<-6648 ze=-51.585<-15439 Statuses=0009 0009 17:31:43 Msec=2250 True Az=99.72 Ze=-51.585 Az status=0009 Ze status=0009 17:31:43 Check angles 17:31:43 SkyScan query 17:31:43 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:31:43 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:31:44 Check angles 17:31:44 SkyScan query 17:31:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:31:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:31:44 Message to Master queued w/err=0: serial=228736 error=0 17:31:49 Received message from Master: op=Filter serial=228737 17:31:49 Color wheel filter change from 0 to 0 17:31:49 FLIGetFilterPos err=0 currentPosition=0 17:31:49 FLIGetStepsRemaining err=0 RemainingSteps=0 17:31:49 Filter is already there-color wheel unchanged 17:31:49 Received message from Master: op=Shutter serial=228738 17:31:49 Shutter LASER close 17:31:49 Received message from Camera: op=State serial=228740 17:31:49 GetSingleValue result=40 Value=cccccccc 17:31:49 SkyScan query 17:31:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:31:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:50 Parameters OK 17:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:50 Set A/D data flow result=40 17:31:50 Set A/D channel type result=40 17:31:50 Set A/D encoding result=40 17:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:50 Set channel filter=0.000000e+000 result=40 17:31:50 Config A/D Result=40 17:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:50 Get A/D filter: -9.255963e+061 result=40 17:31:50 Get A/D value=-858993460 result=40 17:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:31:50 Parameters OK 17:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:31:50 Set A/D data flow result=40 17:31:50 Set A/D channel type result=40 17:31:50 Set A/D encoding result=40 17:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:31:50 Set channel filter=0.000000e+000 result=40 17:31:50 Config A/D Result=40 17:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:31:50 Get A/D filter: -9.255963e+061 result=40 17:31:50 Get A/D value=-858993460 result=40 17:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:31:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:31:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:31:50 Aux= 17:31:50 Message to Camera, serial 228740 queued 17:32:27 Received message from Master: op=PointingHead serial=228753 17:32:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:32:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:32:27 Point started: ret=0 17:32:27 point_skyscan result=0 17:32:28 Check angles 17:32:28 SkyScan query 17:32:29 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.27<-17418 Statuses=0009 0009 17:32:29 Msec=0 True Az=109.14 Ze=-81.27 Az status=0009 Ze status=0009 17:32:29 Check angles 17:32:29 SkyScan query 17:32:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 17:32:29 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 17:32:29 Check angles 17:32:29 SkyScan query 17:32:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.21<-20214 Statuses=0008 0009 17:32:30 Msec=1500 True Az=112.995 Ze=-123.21 Az status=0008 Ze status=0009 17:32:30 Check angles 17:32:30 SkyScan query 17:32:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.15<-21610 Statuses=0008 0009 17:32:31 Msec=2250 True Az=112.995 Ze=-144.15 Az status=0008 Ze status=0009 17:32:31 Check angles 17:32:31 SkyScan query 17:32:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 17:32:32 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 17:32:32 Check angles 17:32:32 SkyScan query 17:32:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:32:32 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:32:32 Message to Master queued w/err=0: serial=228753 error=0 17:32:37 Received message from Master: op=Filter serial=228754 17:32:37 Color wheel filter change from 0 to 0 17:32:37 FLIGetFilterPos err=0 currentPosition=0 17:32:37 FLIGetStepsRemaining err=0 RemainingSteps=0 17:32:37 Filter is already there-color wheel unchanged 17:32:37 Received message from Master: op=Shutter serial=228755 17:32:37 Shutter LASER open 17:32:38 Received message from Camera: op=State serial=228757 17:32:38 GetSingleValue result=40 Value=cccccccc 17:32:38 SkyScan query 17:32:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:32:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:38 Parameters OK 17:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:38 Set A/D data flow result=40 17:32:38 Set A/D channel type result=40 17:32:38 Set A/D encoding result=40 17:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:38 Set channel filter=0.000000e+000 result=40 17:32:38 Config A/D Result=40 17:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:38 Get A/D filter: -9.255963e+061 result=40 17:32:38 Get A/D value=-858993460 result=40 17:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:38 Parameters OK 17:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:38 Set A/D data flow result=40 17:32:38 Set A/D channel type result=40 17:32:38 Set A/D encoding result=40 17:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:38 Set channel filter=0.000000e+000 result=40 17:32:38 Config A/D Result=40 17:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:38 Get A/D filter: -9.255963e+061 result=40 17:32:38 Get A/D value=-858993460 result=40 17:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:32:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:32:38 Aux= 17:32:38 Message to Camera, serial 228757 queued 17:32:47 Received message from Master: op=Shutter serial=228767 17:32:47 Shutter LASER close 17:32:47 Received message from Master: op=PointingHead serial=228771 17:32:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:32:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:32:47 Point started: ret=0 17:32:47 point_skyscan result=0 17:32:48 Check angles 17:32:48 SkyScan query 17:32:49 SkyScan query done: ret=0 az=90.09<-6006 ze=157.41<-1506 Statuses=0009 0009 17:32:49 Msec=0 True Az=90.09 Ze=157.41 Az status=0009 Ze status=0009 17:32:49 Check angles 17:32:49 SkyScan query 17:32:49 SkyScan query done: ret=0 az=72.585<-4839 ze=136.44<-2904 Statuses=0009 0009 17:32:49 Msec=750 True Az=72.585 Ze=136.44 Az status=0009 Ze status=0009 17:32:50 Check angles 17:32:50 SkyScan query 17:32:50 SkyScan query done: ret=0 az=55.2<-3680 ze=115.515<-4299 Statuses=0009 0009 17:32:50 Msec=1500 True Az=55.2 Ze=115.515 Az status=0009 Ze status=0009 17:32:50 Check angles 17:32:50 SkyScan query 17:32:51 SkyScan query done: ret=0 az=41.01<-2734 ze=94.08<-5728 Statuses=0009 0009 17:32:51 Msec=2250 True Az=41.01 Ze=94.08 Az status=0009 Ze status=0009 17:32:51 Check angles 17:32:51 SkyScan query 17:32:52 SkyScan query done: ret=0 az=40.995<-2733 ze=73.11<-7126 Statuses=0008 0009 17:32:52 Msec=3000 True Az=40.995 Ze=73.11 Az status=0008 Ze status=0009 17:32:52 Check angles 17:32:52 SkyScan query 17:32:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 17:32:52 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 17:32:53 Check angles 17:32:53 SkyScan query 17:32:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:32:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:32:53 Message to Master queued w/err=0: serial=228771 error=0 17:32:58 Received message from Master: op=Filter serial=228772 17:32:58 Color wheel filter change from 0 to 0 17:32:58 FLIGetFilterPos err=0 currentPosition=0 17:32:58 FLIGetStepsRemaining err=0 RemainingSteps=0 17:32:58 Filter is already there-color wheel unchanged 17:32:58 Received message from Master: op=Shutter serial=228773 17:32:58 Shutter LASER close 17:32:59 Received message from Camera: op=State serial=228775 17:32:59 GetSingleValue result=40 Value=cccccccc 17:32:59 SkyScan query 17:32:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:32:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:59 Parameters OK 17:32:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:59 Set A/D data flow result=40 17:32:59 Set A/D channel type result=40 17:32:59 Set A/D encoding result=40 17:32:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:59 Set channel filter=0.000000e+000 result=40 17:32:59 Config A/D Result=40 17:32:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:59 Get A/D filter: -9.255963e+061 result=40 17:32:59 Get A/D value=-858993460 result=40 17:32:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:32:59 Parameters OK 17:32:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:32:59 Set A/D data flow result=40 17:32:59 Set A/D channel type result=40 17:32:59 Set A/D encoding result=40 17:32:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:32:59 Set channel filter=0.000000e+000 result=40 17:32:59 Config A/D Result=40 17:32:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:32:59 Get A/D filter: -9.255963e+061 result=40 17:32:59 Get A/D value=-858993460 result=40 17:32:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:32:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:32:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:32:59 Aux= 17:32:59 Message to Camera, serial 228775 queued 17:33:36 Received message from Master: op=PointingHead serial=228788 17:33:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 17:33:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 17:33:36 Point started: ret=0 17:33:36 point_skyscan result=0 17:33:37 Check angles 17:33:37 SkyScan query 17:33:38 SkyScan query done: ret=0 az=63.945<-4263 ze=66.54<-7564 Statuses=0009 0008 17:33:38 Msec=0 True Az=63.945 Ze=66.54 Az status=0009 Ze status=0008 17:33:38 Check angles 17:33:38 SkyScan query 17:33:38 SkyScan query done: ret=0 az=81.435<-5429 ze=66.51<-7566 Statuses=0009 0008 17:33:38 Msec=750 True Az=81.435 Ze=66.51 Az status=0009 Ze status=0008 17:33:39 Check angles 17:33:39 SkyScan query 17:33:39 SkyScan query done: ret=0 az=98.85<-6590 ze=66.495<-7567 Statuses=0009 0008 17:33:39 Msec=1500 True Az=98.85 Ze=66.495 Az status=0009 Ze status=0008 17:33:39 Check angles 17:33:39 SkyScan query 17:33:40 SkyScan query done: ret=0 az=116.25<-7750 ze=66.495<-7567 Statuses=0009 0008 17:33:40 Msec=2250 True Az=116.25 Ze=66.495 Az status=0009 Ze status=0008 17:33:40 Check angles 17:33:40 SkyScan query 17:33:41 SkyScan query done: ret=0 az=134.175<-8945 ze=66.495<-7567 Statuses=0009 0008 17:33:41 Msec=3000 True Az=134.175 Ze=66.495 Az status=0009 Ze status=0008 17:33:41 Check angles 17:33:41 SkyScan query 17:33:41 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 17:33:41 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 17:33:42 Check angles 17:33:42 SkyScan query 17:33:42 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 17:33:42 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 17:33:42 Message to Master queued w/err=0: serial=228788 error=0 17:33:47 Received message from Master: op=Filter serial=228789 17:33:47 Color wheel filter change from 0 to 0 17:33:47 FLIGetFilterPos err=0 currentPosition=0 17:33:47 FLIGetStepsRemaining err=0 RemainingSteps=0 17:33:47 Filter is already there-color wheel unchanged 17:33:47 Received message from Master: op=Shutter serial=228790 17:33:47 Shutter LASER close 17:33:47 Received message from Camera: op=State serial=228792 17:33:47 GetSingleValue result=40 Value=cccccccc 17:33:47 SkyScan query 17:33:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 17:33:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:48 Parameters OK 17:33:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:48 Set A/D data flow result=40 17:33:48 Set A/D channel type result=40 17:33:48 Set A/D encoding result=40 17:33:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:48 Set channel filter=0.000000e+000 result=40 17:33:48 Config A/D Result=40 17:33:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:48 Get A/D filter: -9.255963e+061 result=40 17:33:48 Get A/D value=-858993460 result=40 17:33:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:33:48 Parameters OK 17:33:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:33:48 Set A/D data flow result=40 17:33:48 Set A/D channel type result=40 17:33:48 Set A/D encoding result=40 17:33:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:33:48 Set channel filter=0.000000e+000 result=40 17:33:48 Config A/D Result=40 17:33:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:33:48 Get A/D filter: -9.255963e+061 result=40 17:33:48 Get A/D value=-858993460 result=40 17:33:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:33:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:33:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:33:48 Aux= 17:33:48 Message to Camera, serial 228792 queued 17:34:25 Received message from Master: op=PointingHead serial=228805 17:34:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:34:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:34:25 Point started: ret=0 17:34:25 point_skyscan result=0 17:34:26 Check angles 17:34:26 SkyScan query 17:34:27 SkyScan query done: ret=0 az=134.94<-8996 ze=36.615<-9559 Statuses=0009 0009 17:34:27 Msec=0 True Az=134.94 Ze=36.615 Az status=0009 Ze status=0009 17:34:27 Check angles 17:34:27 SkyScan query 17:34:27 SkyScan query done: ret=0 az=117.09<-7806 ze=15.24<-10984 Statuses=0009 0009 17:34:27 Msec=750 True Az=117.09 Ze=15.24 Az status=0009 Ze status=0009 17:34:27 Check angles 17:34:27 SkyScan query 17:34:28 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.79<-12386 Statuses=0009 0009 17:34:28 Msec=1500 True Az=99.795 Ze=-5.79 Az status=0009 Ze status=0009 17:34:28 Check angles 17:34:28 SkyScan query 17:34:29 SkyScan query done: ret=0 az=81.825<-5455 ze=-27.165<-13811 Statuses=0009 0009 17:34:29 Msec=2250 True Az=81.825 Ze=-27.165 Az status=0009 Ze status=0009 17:34:29 Check angles 17:34:29 SkyScan query 17:34:30 SkyScan query done: ret=0 az=64.35<-4290 ze=-38.58<-14572 Statuses=0009 0008 17:34:30 Msec=3000 True Az=64.35 Ze=-38.58 Az status=0009 Ze status=0008 17:34:30 Check angles 17:34:30 SkyScan query 17:34:30 SkyScan query done: ret=0 az=46.785<-3119 ze=-38.52<-14568 Statuses=0009 0008 17:34:30 Msec=3750 True Az=46.785 Ze=-38.52 Az status=0009 Ze status=0008 17:34:30 Check angles 17:34:30 SkyScan query 17:34:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:34:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 17:34:31 Message to Master queued w/err=0: serial=228805 error=0 17:34:36 Received message from Master: op=Filter serial=228806 17:34:36 Color wheel filter change from 0 to 0 17:34:36 FLIGetFilterPos err=0 currentPosition=0 17:34:36 FLIGetStepsRemaining err=0 RemainingSteps=0 17:34:36 Filter is already there-color wheel unchanged 17:34:36 Received message from Master: op=Shutter serial=228807 17:34:36 Shutter LASER close 17:34:36 Received message from Camera: op=State serial=228809 17:34:36 GetSingleValue result=40 Value=cccccccc 17:34:36 SkyScan query 17:34:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:34:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:37 Parameters OK 17:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:37 Set A/D data flow result=40 17:34:37 Set A/D channel type result=40 17:34:37 Set A/D encoding result=40 17:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:37 Set channel filter=0.000000e+000 result=40 17:34:37 Config A/D Result=40 17:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:37 Get A/D filter: -9.255963e+061 result=40 17:34:37 Get A/D value=-858993460 result=40 17:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:34:37 Parameters OK 17:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:34:37 Set A/D data flow result=40 17:34:37 Set A/D channel type result=40 17:34:37 Set A/D encoding result=40 17:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:34:37 Set channel filter=0.000000e+000 result=40 17:34:37 Config A/D Result=40 17:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:34:37 Get A/D filter: -9.255963e+061 result=40 17:34:37 Get A/D value=-858993460 result=40 17:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:34:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:34:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:34:37 Aux= 17:34:37 Message to Camera, serial 228809 queued 17:35:13 Received message from Master: op=PointingHead serial=228821 17:35:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:35:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:35:13 Point started: ret=0 17:35:13 point_skyscan result=0 17:35:14 Check angles 17:35:14 SkyScan query 17:35:14 SkyScan query done: ret=0 az=64.53<-4302 ze=-68.76<-16584 Statuses=0009 0009 17:35:14 Msec=0 True Az=64.53 Ze=-68.76 Az status=0009 Ze status=0009 17:35:15 Check angles 17:35:15 SkyScan query 17:35:15 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.715<-17981 Statuses=0009 0009 17:35:15 Msec=750 True Az=82.08 Ze=-89.715 Az status=0009 Ze status=0009 17:35:15 Check angles 17:35:15 SkyScan query 17:35:16 SkyScan query done: ret=0 az=99.555<-6637 ze=-110.715<-19381 Statuses=0009 0009 17:35:16 Msec=1500 True Az=99.555 Ze=-110.715 Az status=0009 Ze status=0009 17:35:16 Check angles 17:35:16 SkyScan query 17:35:17 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.61<-20774 Statuses=0009 0009 17:35:17 Msec=2250 True Az=116.985 Ze=-131.61 Az status=0009 Ze status=0009 17:35:17 Check angles 17:35:17 SkyScan query 17:35:17 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.555<-21437 Statuses=0009 0008 17:35:17 Msec=3000 True Az=131.025 Ze=-141.555 Az status=0009 Ze status=0008 17:35:18 Check angles 17:35:18 SkyScan query 17:35:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 17:35:18 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 17:35:18 Message to Master queued w/err=0: serial=228821 error=0 17:35:23 Received message from Master: op=Filter serial=228822 17:35:23 Color wheel filter change from 0 to 0 17:35:23 FLIGetFilterPos err=0 currentPosition=0 17:35:23 FLIGetStepsRemaining err=0 RemainingSteps=0 17:35:23 Filter is already there-color wheel unchanged 17:35:23 Received message from Master: op=Shutter serial=228823 17:35:23 Shutter LASER close 17:35:23 Received message from Camera: op=State serial=228825 17:35:23 GetSingleValue result=40 Value=cccccccc 17:35:23 SkyScan query 17:35:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:35:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:24 Parameters OK 17:35:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:24 Set A/D data flow result=40 17:35:24 Set A/D channel type result=40 17:35:24 Set A/D encoding result=40 17:35:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:24 Set channel filter=0.000000e+000 result=40 17:35:24 Config A/D Result=40 17:35:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:24 Get A/D filter: -9.255963e+061 result=40 17:35:24 Get A/D value=-858993460 result=40 17:35:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:35:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:35:24 Parameters OK 17:35:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:35:24 Set A/D data flow result=40 17:35:24 Set A/D channel type result=40 17:35:24 Set A/D encoding result=40 17:35:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:35:24 Set channel filter=0.000000e+000 result=40 17:35:24 Config A/D Result=40 17:35:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:35:24 Get A/D filter: -9.255963e+061 result=40 17:35:24 Get A/D value=-858993460 result=40 17:35:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-17 17:35:24] 17:35:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:35:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:35:24 Aux= 17:35:24 Message to Camera, serial 228825 queued [UTC 2018-12-17 17:35:52] 17:36:01 Received message from Master: op=PointingHead serial=228838 17:36:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:36:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:36:01 Point started: ret=0 17:36:01 point_skyscan result=0 17:36:02 Check angles 17:36:02 SkyScan query 17:36:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 17:36:03 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 17:36:03 Check angles 17:36:03 SkyScan query 17:36:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:36:03 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:36:03 Message to Master queued w/err=0: serial=228838 error=0 17:36:08 Received message from Master: op=Filter serial=228839 17:36:08 Color wheel filter change from 0 to 0 17:36:08 FLIGetFilterPos err=0 currentPosition=0 17:36:08 FLIGetStepsRemaining err=0 RemainingSteps=0 17:36:08 Filter is already there-color wheel unchanged 17:36:08 Received message from Master: op=Shutter serial=228840 17:36:08 Shutter LASER open 17:36:09 Received message from Camera: op=State serial=228842 17:36:09 GetSingleValue result=40 Value=cccccccc 17:36:09 SkyScan query 17:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:36:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:09 Parameters OK 17:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:09 Set A/D data flow result=40 17:36:09 Set A/D channel type result=40 17:36:09 Set A/D encoding result=40 17:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:09 Set channel filter=0.000000e+000 result=40 17:36:09 Config A/D Result=40 17:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:09 Get A/D filter: -9.255963e+061 result=40 17:36:09 Get A/D value=-858993460 result=40 17:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:09 Parameters OK 17:36:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:09 Set A/D data flow result=40 17:36:09 Set A/D channel type result=40 17:36:09 Set A/D encoding result=40 17:36:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:09 Set channel filter=0.000000e+000 result=40 17:36:09 Config A/D Result=40 17:36:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:09 Get A/D filter: -9.255963e+061 result=40 17:36:09 Get A/D value=-858993460 result=40 17:36:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:36:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:36:09 Aux= 17:36:09 Message to Camera, serial 228842 queued 17:36:18 Received message from Master: op=Shutter serial=228852 17:36:18 Shutter LASER close 17:36:18 Received message from Master: op=PointingHead serial=228856 17:36:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:36:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:36:19 Point started: ret=0 17:36:19 point_skyscan result=0 17:36:19 Check angles 17:36:19 SkyScan query 17:36:20 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.295<-21553 Statuses=0009 0009 17:36:20 Msec=0 True Az=135.885 Ze=-143.295 Az status=0009 Ze status=0009 17:36:20 Check angles 17:36:20 SkyScan query 17:36:21 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.905<-20127 Statuses=0009 0009 17:36:21 Msec=750 True Az=153.765 Ze=-121.905 Az status=0009 Ze status=0009 17:36:21 Check angles 17:36:21 SkyScan query 17:36:21 SkyScan query done: ret=0 az=171.63<-11442 ze=-100.455<-18697 Statuses=0009 0009 17:36:21 Msec=1500 True Az=171.63 Ze=-100.455 Az status=0009 Ze status=0009 17:36:22 Check angles 17:36:22 SkyScan query 17:36:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-79.065<-17271 Statuses=0008 0009 17:36:22 Msec=2250 True Az=175.995 Ze=-79.065 Az status=0008 Ze status=0009 17:36:22 Check angles 17:36:22 SkyScan query 17:36:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.11<-15874 Statuses=0008 0009 17:36:23 Msec=3000 True Az=175.995 Ze=-58.11 Az status=0008 Ze status=0009 17:36:23 Check angles 17:36:23 SkyScan query 17:36:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 17:36:24 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 17:36:24 Message to Master queued w/err=0: serial=228856 error=0 17:36:29 Received message from Master: op=Filter serial=228857 17:36:29 Color wheel filter change from 0 to 0 17:36:29 FLIGetFilterPos err=0 currentPosition=0 17:36:29 FLIGetStepsRemaining err=0 RemainingSteps=0 17:36:29 Filter is already there-color wheel unchanged 17:36:29 Received message from Master: op=Shutter serial=228858 17:36:29 Shutter LASER close 17:36:29 Received message from Camera: op=State serial=228860 17:36:29 GetSingleValue result=40 Value=cccccccc 17:36:29 SkyScan query 17:36:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:36:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:30 Parameters OK 17:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:30 Set A/D data flow result=40 17:36:30 Set A/D channel type result=40 17:36:30 Set A/D encoding result=40 17:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:30 Set channel filter=0.000000e+000 result=40 17:36:30 Config A/D Result=40 17:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:30 Get A/D filter: -9.255963e+061 result=40 17:36:30 Get A/D value=-858993460 result=40 17:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:36:30 Parameters OK 17:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:36:30 Set A/D data flow result=40 17:36:30 Set A/D channel type result=40 17:36:30 Set A/D encoding result=40 17:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:36:30 Set channel filter=0.000000e+000 result=40 17:36:30 Config A/D Result=40 17:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:36:30 Get A/D filter: -9.255963e+061 result=40 17:36:30 Get A/D value=-858993460 result=40 17:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:36:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:36:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:36:30 Aux= 17:36:30 Message to Camera, serial 228860 queued 17:37:06 Received message from Master: op=PointingHead serial=228873 17:37:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:37:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:37:07 Point started: ret=0 17:37:07 point_skyscan result=0 17:37:08 Check angles 17:37:08 SkyScan query 17:37:08 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.195<-13413 Statuses=0009 0009 17:37:08 Msec=0 True Az=152.655 Ze=-21.195 Az status=0009 Ze status=0009 17:37:08 Check angles 17:37:08 SkyScan query 17:37:09 SkyScan query done: ret=0 az=134.565<-8971 ze=0.18<-11988 Statuses=0009 0009 17:37:09 Msec=750 True Az=134.565 Ze=0.18 Az status=0009 Ze status=0009 17:37:09 Check angles 17:37:09 SkyScan query 17:37:10 SkyScan query done: ret=0 az=117.285<-7819 ze=21.18<-10588 Statuses=0009 0009 17:37:10 Msec=1500 True Az=117.285 Ze=21.18 Az status=0009 Ze status=0009 17:37:10 Check angles 17:37:10 SkyScan query 17:37:10 SkyScan query done: ret=0 az=99.405<-6627 ze=42.495<-9167 Statuses=0009 0009 17:37:10 Msec=2250 True Az=99.405 Ze=42.495 Az status=0009 Ze status=0009 17:37:11 Check angles 17:37:11 SkyScan query 17:37:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.57<-8562 Statuses=0009 0008 17:37:11 Msec=3000 True Az=85.995 Ze=51.57 Az status=0009 Ze status=0008 17:37:11 Check angles 17:37:11 SkyScan query 17:37:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:37:12 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 17:37:12 Message to Master queued w/err=0: serial=228873 error=0 17:37:17 Received message from Master: op=Filter serial=228874 17:37:17 Color wheel filter change from 0 to 0 17:37:17 FLIGetFilterPos err=0 currentPosition=0 17:37:17 FLIGetStepsRemaining err=0 RemainingSteps=0 17:37:17 Filter is already there-color wheel unchanged 17:37:17 Received message from Master: op=Shutter serial=228875 17:37:17 Shutter LASER close 17:37:17 Received message from Camera: op=State serial=228877 17:37:17 GetSingleValue result=40 Value=cccccccc 17:37:17 SkyScan query 17:37:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:37:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:18 Parameters OK 17:37:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:18 Set A/D data flow result=40 17:37:18 Set A/D channel type result=40 17:37:18 Set A/D encoding result=40 17:37:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:18 Set channel filter=0.000000e+000 result=40 17:37:18 Config A/D Result=40 17:37:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:18 Get A/D filter: -9.255963e+061 result=40 17:37:18 Get A/D value=-858993460 result=40 17:37:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:37:18 Parameters OK 17:37:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:37:18 Set A/D data flow result=40 17:37:18 Set A/D channel type result=40 17:37:18 Set A/D encoding result=40 17:37:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:37:18 Set channel filter=0.000000e+000 result=40 17:37:18 Config A/D Result=40 17:37:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:37:18 Get A/D filter: -9.255963e+061 result=40 17:37:18 Get A/D value=-858993460 result=40 17:37:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:37:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:37:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:37:18 Aux= 17:37:18 Message to Camera, serial 228877 queued 17:37:55 Received message from Master: op=PointingHead serial=228890 17:37:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:37:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:37:55 Point started: ret=0 17:37:55 point_skyscan result=0 17:37:56 Check angles 17:37:56 SkyScan query 17:37:56 SkyScan query done: ret=0 az=109.125<-7275 ze=38.49<-9434 Statuses=0009 0008 17:37:56 Msec=0 True Az=109.125 Ze=38.49 Az status=0009 Ze status=0008 17:37:56 Check angles 17:37:56 SkyScan query 17:37:57 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 17:37:57 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 17:37:57 Check angles 17:37:57 SkyScan query 17:37:58 SkyScan query done: ret=0 az=144.45<-9630 ze=38.505<-9433 Statuses=0009 0008 17:37:58 Msec=1500 True Az=144.45 Ze=38.505 Az status=0009 Ze status=0008 17:37:58 Check angles 17:37:58 SkyScan query 17:37:59 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 17:37:59 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 17:37:59 Check angles 17:37:59 SkyScan query 17:37:59 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:37:59 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:37:59 Check angles 17:37:59 SkyScan query 17:38:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:38:00 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 17:38:00 Message to Master queued w/err=0: serial=228890 error=0 17:38:05 Received message from Master: op=Filter serial=228891 17:38:05 Color wheel filter change from 0 to 0 17:38:05 FLIGetFilterPos err=0 currentPosition=0 17:38:05 FLIGetStepsRemaining err=0 RemainingSteps=0 17:38:05 Filter is already there-color wheel unchanged 17:38:05 Received message from Master: op=Shutter serial=228892 17:38:05 Shutter LASER close 17:38:05 Received message from Camera: op=State serial=228894 17:38:05 GetSingleValue result=40 Value=cccccccc 17:38:05 SkyScan query 17:38:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:38:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:06 Parameters OK 17:38:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:06 Set A/D data flow result=40 17:38:06 Set A/D channel type result=40 17:38:06 Set A/D encoding result=40 17:38:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:06 Set channel filter=0.000000e+000 result=40 17:38:06 Config A/D Result=40 17:38:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:06 Get A/D filter: -9.255963e+061 result=40 17:38:06 Get A/D value=-858993460 result=40 17:38:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:06 Parameters OK 17:38:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:06 Set A/D data flow result=40 17:38:06 Set A/D channel type result=40 17:38:06 Set A/D encoding result=40 17:38:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:06 Set channel filter=0.000000e+000 result=40 17:38:06 Config A/D Result=40 17:38:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:06 Get A/D filter: -9.255963e+061 result=40 17:38:06 Get A/D value=-858993460 result=40 17:38:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:38:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:38:06 Aux= 17:38:06 Message to Camera, serial 228894 queued 17:38:42 Received message from Master: op=PointingHead serial=228906 17:38:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:38:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:38:42 Point started: ret=0 17:38:42 point_skyscan result=0 17:38:43 Check angles 17:38:43 SkyScan query 17:38:43 SkyScan query done: ret=0 az=153.21<-10214 ze=8.955<-11403 Statuses=0009 0009 17:38:43 Msec=0 True Az=153.21 Ze=8.955 Az status=0009 Ze status=0009 17:38:44 Check angles 17:38:44 SkyScan query 17:38:44 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.075<-12805 Statuses=0009 0009 17:38:44 Msec=750 True Az=135.78 Ze=-12.075 Az status=0009 Ze status=0009 17:38:44 Check angles 17:38:44 SkyScan query 17:38:45 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.985<-14199 Statuses=0009 0009 17:38:45 Msec=1500 True Az=118.26 Ze=-32.985 Az status=0009 Ze status=0009 17:38:45 Check angles 17:38:45 SkyScan query 17:38:46 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.525<-15435 Statuses=0009 0009 17:38:46 Msec=2250 True Az=100.845 Ze=-51.525 Az status=0009 Ze status=0009 17:38:46 Check angles 17:38:46 SkyScan query 17:38:46 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 17:38:46 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 17:38:47 Check angles 17:38:47 SkyScan query 17:38:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:38:47 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:38:47 Message to Master queued w/err=0: serial=228906 error=0 17:38:52 Received message from Master: op=Filter serial=228907 17:38:52 Color wheel filter change from 0 to 0 17:38:52 FLIGetFilterPos err=0 currentPosition=0 17:38:52 FLIGetStepsRemaining err=0 RemainingSteps=0 17:38:52 Filter is already there-color wheel unchanged 17:38:52 Received message from Master: op=Shutter serial=228908 17:38:52 Shutter LASER close 17:38:52 Received message from Camera: op=State serial=228910 17:38:52 GetSingleValue result=40 Value=cccccccc 17:38:52 SkyScan query 17:38:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:38:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:53 Parameters OK 17:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:53 Set A/D data flow result=40 17:38:53 Set A/D channel type result=40 17:38:53 Set A/D encoding result=40 17:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:53 Set channel filter=0.000000e+000 result=40 17:38:53 Config A/D Result=40 17:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:53 Get A/D filter: -9.255963e+061 result=40 17:38:53 Get A/D value=-858993460 result=40 17:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:38:53 Parameters OK 17:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:38:53 Set A/D data flow result=40 17:38:53 Set A/D channel type result=40 17:38:53 Set A/D encoding result=40 17:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:38:53 Set channel filter=0.000000e+000 result=40 17:38:53 Config A/D Result=40 17:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:38:53 Get A/D filter: -9.255963e+061 result=40 17:38:53 Get A/D value=-858993460 result=40 17:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:38:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:38:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:38:53 Aux= 17:38:53 Message to Camera, serial 228910 queued 17:39:30 Received message from Master: op=PointingHead serial=228923 17:39:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:39:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:39:30 Point started: ret=0 17:39:30 point_skyscan result=0 17:39:31 Check angles 17:39:31 SkyScan query 17:39:31 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.285<-17419 Statuses=0009 0009 17:39:31 Msec=0 True Az=109.155 Ze=-81.285 Az status=0009 Ze status=0009 17:39:32 Check angles 17:39:32 SkyScan query 17:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 17:39:32 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 17:39:32 Check angles 17:39:32 SkyScan query 17:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.05<-20270 Statuses=0008 0009 17:39:33 Msec=1500 True Az=112.995 Ze=-124.05 Az status=0008 Ze status=0009 17:39:33 Check angles 17:39:33 SkyScan query 17:39:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.99<-21666 Statuses=0008 0009 17:39:34 Msec=2250 True Az=112.995 Ze=-144.99 Az status=0008 Ze status=0009 17:39:34 Check angles 17:39:34 SkyScan query 17:39:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.96<-23064 Statuses=0008 0009 17:39:34 Msec=3000 True Az=112.995 Ze=-165.96 Az status=0008 Ze status=0009 17:39:35 Check angles 17:39:35 SkyScan query 17:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.04<-23536 Statuses=0008 0008 17:39:35 Msec=3750 True Az=112.995 Ze=-173.04 Az status=0008 Ze status=0008 17:39:35 Message to Master queued w/err=0: serial=228923 error=0 17:39:40 Received message from Master: op=Filter serial=228924 17:39:40 Color wheel filter change from 0 to 0 17:39:40 FLIGetFilterPos err=0 currentPosition=0 17:39:40 FLIGetStepsRemaining err=0 RemainingSteps=0 17:39:40 Filter is already there-color wheel unchanged 17:39:40 Received message from Master: op=Shutter serial=228925 17:39:40 Shutter LASER open 17:39:41 Received message from Camera: op=State serial=228927 17:39:41 GetSingleValue result=40 Value=cccccccc 17:39:41 SkyScan query 17:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:39:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:39:41 Parameters OK 17:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:39:41 Set A/D data flow result=40 17:39:41 Set A/D channel type result=40 17:39:41 Set A/D encoding result=40 17:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:39:41 Set channel filter=0.000000e+000 result=40 17:39:41 Config A/D Result=40 17:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:39:41 Get A/D filter: -9.255963e+061 result=40 17:39:41 Get A/D value=-858993460 result=40 17:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:39:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:39:41 Parameters OK 17:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:39:41 Set A/D data flow result=40 17:39:41 Set A/D channel type result=40 17:39:41 Set A/D encoding result=40 17:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:39:41 Set channel filter=0.000000e+000 result=40 17:39:41 Config A/D Result=40 17:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:39:41 Get A/D filter: -9.255963e+061 result=40 17:39:41 Get A/D value=-858993460 result=40 17:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:39:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:39:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:39:41 Aux= 17:39:41 Message to Camera, serial 228927 queued 17:39:50 Received message from Master: op=Shutter serial=228937 17:39:50 Shutter LASER close 17:39:50 Received message from Master: op=PointingHead serial=228941 17:39:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:39:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:39:50 Point started: ret=0 17:39:50 point_skyscan result=0 17:39:51 Check angles 17:39:51 SkyScan query 17:39:52 SkyScan query done: ret=0 az=89.88<-5992 ze=157.305<-1513 Statuses=0009 0009 17:39:52 Msec=0 True Az=89.88 Ze=157.305 Az status=0009 Ze status=0009 17:39:52 Check angles 17:39:52 SkyScan query 17:39:52 SkyScan query done: ret=0 az=72.465<-4831 ze=136.35<-2910 Statuses=0009 0009 17:39:52 Msec=750 True Az=72.465 Ze=136.35 Az status=0009 Ze status=0009 17:39:53 Check angles 17:39:53 SkyScan query 17:39:53 SkyScan query done: ret=0 az=54.69<-3646 ze=114.945<-4337 Statuses=0009 0009 17:39:53 Msec=1500 True Az=54.69 Ze=114.945 Az status=0009 Ze status=0009 17:39:53 Check angles 17:39:53 SkyScan query 17:39:54 SkyScan query done: ret=0 az=40.995<-2733 ze=94.005<-5733 Statuses=0009 0009 17:39:54 Msec=2250 True Az=40.995 Ze=94.005 Az status=0009 Ze status=0009 17:39:54 Check angles 17:39:54 SkyScan query 17:39:55 SkyScan query done: ret=0 az=40.995<-2733 ze=73.02<-7132 Statuses=0008 0009 17:39:55 Msec=3000 True Az=40.995 Ze=73.02 Az status=0008 Ze status=0009 17:39:55 Check angles 17:39:55 SkyScan query 17:39:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 17:39:56 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 17:39:56 Check angles 17:39:56 SkyScan query 17:39:56 SkyScan query done: ret=0 az=40.98<-2732 ze=51.48<-8568 Statuses=0008 0008 17:39:56 Msec=4500 True Az=40.98 Ze=51.48 Az status=0008 Ze status=0008 17:39:56 Message to Master queued w/err=0: serial=228941 error=0 17:40:01 Received message from Master: op=Filter serial=228942 17:40:01 Color wheel filter change from 0 to 0 17:40:01 FLIGetFilterPos err=0 currentPosition=0 17:40:01 FLIGetStepsRemaining err=0 RemainingSteps=0 17:40:01 Filter is already there-color wheel unchanged 17:40:01 Received message from Master: op=Shutter serial=228943 17:40:01 Shutter LASER close 17:40:02 Received message from Camera: op=State serial=228945 17:40:02 GetSingleValue result=40 Value=cccccccc 17:40:02 SkyScan query 17:40:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:40:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:40:02 Parameters OK 17:40:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:40:02 Set A/D data flow result=40 17:40:02 Set A/D channel type result=40 17:40:02 Set A/D encoding result=40 17:40:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:40:02 Set channel filter=0.000000e+000 result=40 17:40:02 Config A/D Result=40 17:40:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:40:02 Get A/D filter: -9.255963e+061 result=40 17:40:02 Get A/D value=-858993460 result=40 17:40:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:40:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:40:02 Parameters OK 17:40:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:40:02 Set A/D data flow result=40 17:40:02 Set A/D channel type result=40 17:40:02 Set A/D encoding result=40 17:40:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:40:02 Set channel filter=0.000000e+000 result=40 17:40:02 Config A/D Result=40 17:40:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:40:02 Get A/D filter: -9.255963e+061 result=40 17:40:02 Get A/D value=-858993460 result=40 17:40:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:40:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:40:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:40:02 Aux= 17:40:02 Message to Camera, serial 228945 queued 17:40:41 Received message from Master: op=PointingHead serial=228958 17:40:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:40:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:40:41 Point started: ret=0 17:40:41 point_skyscan result=0 17:40:42 Check angles 17:40:42 SkyScan query 17:40:43 SkyScan query done: ret=0 az=65.25<-4350 ze=81.99<-6534 Statuses=0009 0009 17:40:43 Msec=0 True Az=65.25 Ze=81.99 Az status=0009 Ze status=0009 17:40:43 Check angles 17:40:43 SkyScan query 17:40:44 SkyScan query done: ret=0 az=82.8<-5520 ze=102.825<-5145 Statuses=0009 0009 17:40:44 Msec=750 True Az=82.8 Ze=102.825 Az status=0009 Ze status=0009 17:40:44 Check angles 17:40:44 SkyScan query 17:40:44 SkyScan query done: ret=0 az=100.53<-6702 ze=124.335<-3711 Statuses=0009 0009 17:40:44 Msec=1500 True Az=100.53 Ze=124.335 Az status=0009 Ze status=0009 17:40:44 Check angles 17:40:44 SkyScan query 17:40:45 SkyScan query done: ret=0 az=112.995<-7533 ze=144.51<-2366 Statuses=0009 0009 17:40:45 Msec=2250 True Az=112.995 Ze=144.51 Az status=0009 Ze status=0009 17:40:45 Check angles 17:40:45 SkyScan query 17:40:46 SkyScan query done: ret=0 az=112.995<-7533 ze=165.36<-976 Statuses=0008 0009 17:40:46 Msec=3000 True Az=112.995 Ze=165.36 Az status=0008 Ze status=0009 17:40:46 Check angles 17:40:46 SkyScan query 17:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-174.24<-23616 Statuses=0008 0009 17:40:47 Msec=3750 True Az=112.995 Ze=-174.24 Az status=0008 Ze status=0009 17:40:47 Check angles 17:40:47 SkyScan query 17:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.965<-23531 Statuses=0008 0008 17:40:47 Msec=4500 True Az=112.995 Ze=-172.965 Az status=0008 Ze status=0008 17:40:47 Message to Master queued w/err=0: serial=228958 error=0 17:40:52 Received message from Master: op=Filter serial=228959 17:40:52 Color wheel filter change from 0 to 2 17:40:52 FLIGetFilterPos err=0 currentPosition=0 17:40:52 FLIGetStepsRemaining err=0 RemainingSteps=0 17:40:55 FLISetFilterPos err=0 rqPosition=2 17:40:55 FLIGetStepsRemaining err=0 RemainingSteps=0 17:40:55 Check after 0.00 sec for filter wheel DIn/CWh=0 17:40:55 FLIGetFilterPos err=0 currentPosition=2 17:40:55 FLIGetStepsRemaining err=0 RemainingSteps=0 17:40:56 Received message from Master: op=Shutter serial=228960 17:40:56 Shutter LASER close 17:40:56 Received message from Camera: op=State serial=228962 17:40:56 GetSingleValue result=40 Value=cccccccc 17:40:56 SkyScan query 17:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:40:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:40:56 Parameters OK 17:40:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:40:56 Set A/D data flow result=40 17:40:56 Set A/D channel type result=40 17:40:56 Set A/D encoding result=40 17:40:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:40:56 Set channel filter=0.000000e+000 result=40 17:40:56 Config A/D Result=40 17:40:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:40:56 Get A/D filter: -9.255963e+061 result=40 17:40:56 Get A/D value=-858993460 result=40 17:40:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:40:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:40:56 Parameters OK 17:40:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:40:56 Set A/D data flow result=40 17:40:56 Set A/D channel type result=40 17:40:56 Set A/D encoding result=40 17:40:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:40:56 Set channel filter=0.000000e+000 result=40 17:40:56 Config A/D Result=40 17:40:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:40:56 Get A/D filter: -9.255963e+061 result=40 17:40:56 Get A/D value=-858993460 result=40 17:40:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:40:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:40:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:40:56 Aux= 17:40:56 Message to Camera, serial 228962 queued 17:41:02 Received message from Master: op=PointingHead serial=228973 17:41:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:41:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:41:03 Point started: ret=0 17:41:03 point_skyscan result=0 17:41:03 Check angles 17:41:03 SkyScan query 17:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:41:04 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:41:04 Message to Master queued w/err=0: serial=228973 error=0 17:41:09 Received message from Master: op=Filter serial=228974 17:41:09 Color wheel filter change from 2 to 2 17:41:09 FLIGetFilterPos err=0 currentPosition=2 17:41:09 FLIGetStepsRemaining err=0 RemainingSteps=0 17:41:09 Filter is already there-color wheel unchanged 17:41:09 Received message from Master: op=Shutter serial=228975 17:41:09 Shutter LASER close 17:41:09 Received message from Camera: op=State serial=228977 17:41:09 GetSingleValue result=40 Value=cccccccc 17:41:09 SkyScan query 17:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:41:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:10 Parameters OK 17:41:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:10 Set A/D data flow result=40 17:41:10 Set A/D channel type result=40 17:41:10 Set A/D encoding result=40 17:41:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:10 Set channel filter=0.000000e+000 result=40 17:41:10 Config A/D Result=40 17:41:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:10 Get A/D filter: -9.255963e+061 result=40 17:41:10 Get A/D value=-858993460 result=40 17:41:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:10 Parameters OK 17:41:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:10 Set A/D data flow result=40 17:41:10 Set A/D channel type result=40 17:41:10 Set A/D encoding result=40 17:41:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:10 Set channel filter=0.000000e+000 result=40 17:41:10 Config A/D Result=40 17:41:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:10 Get A/D filter: -9.255963e+061 result=40 17:41:10 Get A/D value=-858993460 result=40 17:41:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:41:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:41:10 Aux= 17:41:10 Message to Camera, serial 228977 queued 17:41:46 Received message from Master: op=PointingHead serial=228989 17:41:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:41:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:41:46 Point started: ret=0 17:41:46 point_skyscan result=0 17:41:47 Check angles 17:41:47 SkyScan query 17:41:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:41:47 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:41:47 Message to Master queued w/err=0: serial=228989 error=0 17:41:52 Received message from Master: op=Filter serial=228990 17:41:52 Color wheel filter change from 2 to 2 17:41:52 FLIGetFilterPos err=0 currentPosition=2 17:41:52 FLIGetStepsRemaining err=0 RemainingSteps=0 17:41:52 Filter is already there-color wheel unchanged 17:41:53 Received message from Master: op=Shutter serial=228991 17:41:53 Shutter LASER close 17:41:53 Received message from Camera: op=State serial=228993 17:41:53 GetSingleValue result=40 Value=cccccccc 17:41:53 SkyScan query 17:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:41:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:53 Parameters OK 17:41:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:53 Set A/D data flow result=40 17:41:53 Set A/D channel type result=40 17:41:53 Set A/D encoding result=40 17:41:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:53 Set channel filter=0.000000e+000 result=40 17:41:53 Config A/D Result=40 17:41:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:53 Get A/D filter: -9.255963e+061 result=40 17:41:53 Get A/D value=-858993460 result=40 17:41:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:41:53 Parameters OK 17:41:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:41:53 Set A/D data flow result=40 17:41:53 Set A/D channel type result=40 17:41:53 Set A/D encoding result=40 17:41:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:41:53 Set channel filter=0.000000e+000 result=40 17:41:53 Config A/D Result=40 17:41:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:41:53 Get A/D filter: -9.255963e+061 result=40 17:41:53 Get A/D value=-858993460 result=40 17:41:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:41:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:41:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:41:53 Aux= 17:41:53 Message to Camera, serial 228993 queued 17:42:01 Received message from Master: op=Log close serial=229007 17:42:01 Log file close 17:42:01 * END OF LOG *